diff options
Diffstat (limited to 'include/asm-blackfin/mach-bf537')
| -rw-r--r-- | include/asm-blackfin/mach-bf537/anomaly.h | 120 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/bf537.h | 287 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 147 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/blackfin.h | 430 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/cdefBF534.h | 1823 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/cdefBF537.h | 209 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/defBF534.h | 2501 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/defBF537.h | 404 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/dma.h | 55 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/irq.h | 219 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/mem_init.h | 330 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf537/mem_map.h | 175 |
12 files changed, 6700 insertions, 0 deletions
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h new file mode 100644 index 00000000000..7f040f5ba01 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -0,0 +1,120 @@ + +/* + * File: include/asm-blackfin/mach-bf537/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* This file shoule be up to date with: + * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List + * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List + * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1)) +#error Kernel will not work on BF537/6/4 Version 0.1 +#endif + +#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive + Channel DMA stops */ +#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR + registers. */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits*/ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is + Changed */ +#endif +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + SPORT external receive and transmit clocks. */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic + control */ +#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when + killed in a particular stage*/ +#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC + registers are interrupted */ +#endif + +#if defined(CONFIG_BF_REV_0_2) +#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or + IDLE around a Change of Control causes + unpredictable results */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */ +#endif +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event + interrupt not functional */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */ +#endif +#define ANOMALY_05000257 /* An interrupt or exception during short Hardware + loops may cause the instruction fetch unit to + malfunction */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of + the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE + instruction will cause an infinite stall in the + second to last instruction in a hardware loop */ +#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running + and non-zero DEB_TRAFFIC_PERIOD value */ +#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000280 /* SPI Master boot mode does not work well with + Atmel Dataflash devices */ + +#endif /* CONFIG_BF_REV_0_2 */ + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/include/asm-blackfin/mach-bf537/bf537.h new file mode 100644 index 00000000000..b8924cd7730 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/bf537.h @@ -0,0 +1,287 @@ +/* + * File: include/asm-blackfin/mach-bf537/bf537.h + * Based on: + * Author: + * + * Created: + * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF537 + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF537_H__ +#define __MACH_BF537_H__ + +#define SUPPORTED_REVID 2 + +/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */ + +#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE) /* SPI_STAT */ +#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORTx_STAT */ +#define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */ +#define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */ +#define UART_ERR_MASK_STAT1 (0x4) /* UARTx_IIR */ +#define UART_ERR_MASK_STAT0 (0x2) /* UARTx_IIR */ +#define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */ + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + + +#define BLKFIN_DSUBBANKS 4 +#define BLKFIN_DWAYS 2 +#define BLKFIN_DLINES 64 +#define BLKFIN_ISUBBANKS 4 +#define BLKFIN_IWAYS 4 +#define BLKFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#define MAX_VC 650000000 +#define MIN_VC 50000000 + +/********************************PLL Settings **************************************/ +#ifdef CONFIG_BFIN_KERNEL_CLOCK +#if (CONFIG_VCO_MULT < 0) +#error "VCO Multiplier is less than 0. Please select a different value" +#endif + +#if (CONFIG_VCO_MULT == 0) +#error "VCO Multiplier should be greater than 0. Please select a different value" +#endif + +#if (CONFIG_VCO_MULT > 64) +#error "VCO Multiplier is more than 64. Please select a different value" +#endif + +#ifndef CONFIG_CLKIN_HALF +#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +#else +#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) +#endif + +#ifndef CONFIG_PLL_BYPASS +#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) +#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#if (CONFIG_SCLK_DIV < 1) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_SCLK_DIV > 15) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_CCLK_DIV != 1) +#if (CONFIG_CCLK_DIV != 2) +#if (CONFIG_CCLK_DIV != 4) +#if (CONFIG_CCLK_DIV != 8) +#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" +#endif +#endif +#endif +#endif + +#if (CONFIG_VCO_HZ > MAX_VC) +#error "VCO selected is more than maximum value. Please change the VCO multipler" +#endif + +#if (CONFIG_SCLK_HZ > 133000000) +#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ < 27000000) +#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) +#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) +#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) +#error "Please select sclk less than cclk" +#endif +#endif +#endif + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) +#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK +#endif + +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +#ifdef CONFIG_BF537 +#define CPU "BF537" +#define CPUID 0x027c8000 +#endif +#ifdef CONFIG_BF536 +#define CPU "BF536" +#define CPUID 0x027c8000 +#endif +#ifdef CONFIG_BF534 +#define CPU "BF534" +#define CPUID 0x027c6000 +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#if (CONFIG_MEM_SIZE % 4) +#error "SDRAM mem size must be multible of 4MB" +#endif + +#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) +#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) +#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158_WORKAROUND 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#else /*Write Through */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) +#endif + + +#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) +#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) +#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) +#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) + +#define SIZE_1K 0x00000400 /* 1K */ +#define SIZE_4K 0x00001000 /* 4K */ +#define SIZE_1M 0x00100000 /* 1M */ +#define SIZE_4M 0x00400000 /* 4M */ + +#define MAX_CPLBS (16 * 2) + +/* +* Number of required data CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 16 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Data Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +* 1 for ASYNC Memory +*/ + + +#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2) + +/* +* Number of required instruction CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 12 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Instruction Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +*/ + +#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2) + +#endif /* __MACH_BF537_H__ */ diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h new file mode 100644 index 00000000000..8f5d9c4d8d5 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -0,0 +1,147 @@ +#include <linux/serial.h> +#include <asm/dma.h> + +#define NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) +#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) +#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) +#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) + +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +# define CONFIG_SERIAL_BFIN_CTSRTS + +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_CTS_PIN +# define CONFIG_UART1_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_RTS_PIN +# define CONFIG_UART1_RTS_PIN -1 +# endif +#endif +/* + * The pin configuration is different from schematic + */ +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#else + struct work_struct cts_workqueue; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int cts_pin; + int rts_pin; +#endif +}; + +struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + 0xFFC00400, + IRQ_UART0_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART0_TX, + CH_UART0_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + 0xFFC02000, + IRQ_UART1_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART1_TX, + CH_UART1_RX, +#endif +#ifdef CONFIG_BFIN_UART1_CTSRTS + CONFIG_UART1_CTS_PIN, + CONFIG_UART1_RTS_PIN, +#endif + }, +#endif +}; + +int nr_ports = ARRAY_SIZE(bfin_serial_resource); + +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ + unsigned short val; + val = bfin_read16(BFIN_PORT_MUX); + val &= ~(PFDE | PFTE); + bfin_write16(BFIN_PORT_MUX, val); + + val = bfin_read16(PORTF_FER); + val |= 0xF; + bfin_write16(PORTF_FER, val); + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, NULL); + gpio_direction_input(uart->cts_pin); + } + + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, NULL); + gpio_direction_output(uart->rts_pin); + } +#endif +} diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h new file mode 100644 index 00000000000..bbd97051ec9 --- /dev/null +++ b/include/asm-blackfin/mach-bf537/blackfin.h @@ -0,0 +1,430 @@ +/* + * File: include/asm-blackfin/mach-bf537/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF537_FAMILY + +#include "bf537.h" +#include "mem_map.h" +#include "defBF534.h" +#include "anomaly.h" + +#if defined(CONFIG_BF537) || defined(CONFIG_BF536) +#include "defBF537.h" +#endif + +#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) +#include "cdefBF534.h" + +/* UART 0*/ +#define bfin_read_UART_THR() bfin_read_UART0_THR() +#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val) +#define bfin_read_UART_RBR() bfin_read_UART0_RBR() +#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val) +#define bfin_read_UART_DLL() bfin_read_UART0_DLL() +#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val) +#define bfin_read_UART_IER() bfin_read_UART0_IER() +#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val) +#define bfin_read_UART_DLH() bfin_read_UART0_DLH() +#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val) +#define bfin_read_UART_IIR() bfin_read_UART0_IIR() +#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val) +#define bfin_read_UART_LCR() bfin_read_UART0_LCR() +#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val) +#define bfin_read_UART_MCR() bfin_read_UART0_MCR() +#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val) +#define bfin_read_UART_LSR() bfin_read_UART0_LSR() +#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val) +#define bfin_read_UART_SCR() bfin_read_UART0_SCR() +#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val) +#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL() +#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val) + +#if defined(CONFIG_BF537) || defined(CONFIG_BF536) +#include "cdefBF537.h" +#endif +#endif + +/* MAP used DEFINES from BF533 to BF537 - so we don't need to change them in the driver, kernel, etc. */ + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 + +/* UART 0*/ + +/* DMA Channnel */ +#define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX() +#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val) +#define CH_UART_RX CH_UART0_RX +#define bfin_read_CH_UART_TX() bfin_read_CH_UART0_TX() +#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART0_TX(val) +#define CH_UART_TX CH_UART0_TX + +/* System Interrupt Controller */ +#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART0_RX() +#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART0_RX(val) +#define IRQ_UART_RX IRQ_UART0_RX +#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART0_TX() +#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART0_TX(val) +#define IRQ_UART_TX IRQ_UART0_TX +#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART0_ERROR() +#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART0_ERROR(val) +#define IRQ_UART_ERROR IRQ_UART0_ERROR + +/* MMR Registers*/ +#define bfin_read_UART_THR() bfin_read_UART0_THR() +#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val) +#define UART_THR UART0_THR +#define bfin_read_UART_RBR() bfin_read_UART0_RBR() +#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val) +#define UART_RBR UART0_RBR +#define bfin_read_UART_DLL() bfin_read_UART0_DLL() +#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val) +#define UART_DLL UART0_DLL +#define bfin_read_UART_IER() bfin_read_UART0_IER() +#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val) +#define UART_IER UART0_IER +#define bfin_read_UART_DLH() bfin_read_UART0_DLH() +#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val) +#define UART_DLH UART0_DLH +#define bfin_read_UART_IIR() bfin_read_UART0_IIR() +#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val) +#define UART_IIR UART0_IIR +#define bfin_read_UART_LCR() bfin_read_UART0_LCR() +#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val) +#define UART_LCR UART0_LCR +#define bfin_read_UART_MCR() bfin_read_UART0_MCR() +#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val) +#define UART_MCR UART0_MCR +#define bfin_read_UART_LSR() bfin_read_UART0_LSR() +#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val) +#define UART_LSR UART0_LSR +#define bfin_read_UART_SCR() bfin_read_UART0_SCR() +#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val) +#define UART_SCR UART0_SCR +#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL() +#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val) +#define UART_GCTL UART0_GCTL + +/* DPMC*/ +#define bfin_read_STOPCK_OFF() bfin_read_STOPCK() +#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) +#define STOPCK_OFF STOPCK + +/* FIO USE PORT F*/ +#ifdef CONFIG_BF537_PORT_F +#define bfin_read_PORT_FER() bfin_read_PORTF_FER() +#define bfin_write_PORT_FER(val) bfin_write_PORTF_FER(val) +#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO() +#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val) +#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR() +#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val) +#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET() +#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val) +#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE() +#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val) +#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA() +#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val) +#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR() +#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val) +#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET() +#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val) +#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE() +#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val) +#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB() +#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val) +#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR() +#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val) +#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET() +#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val) +#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE() +#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val) +#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val) +#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR() +#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val) +#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE() +#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val) +#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH() +#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val) +#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN() +#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val) + +#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO() +#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val) +#define FIO_FLAG_D PORTFIO +#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR() +#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val) +#define FIO_FLAG_C PORTFIO_CLEAR +#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET() +#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val) +#define FIO_FLAG_S PORTFIO_SET +#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE() +#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val) +#define FIO_FLAG_T PORTFIO_TOGGLE +#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA() +#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val) +#define FIO_MASKA_D PORTFIO_MASKA +#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR() +#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val) +#define FIO_MASKA_C PORTFIO_MASKA_CLEAR +#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET() +#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val) +#define FIO_MASKA_S PORTFIO_MASKA_SET +#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE() +#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val) +#define FIO_MASKA_T PORTFIO_MASKA_TOGGLE +#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB() +#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val) +#define FIO_MASKB_D PORTFIO_MASKB +#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR() +#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val) +#define FIO_MASKB_C PORTFIO_MASKB_CLEAR +#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET() +#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val) +#define FIO_MASKB_S PORTFIO_MASKB_SET +#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE() +#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val) +#define FIO_MASKB_T PORTFIO_MASKB_TOGGLE +#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val) +#define FIO_DIR PORTFIO_DIR +#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR() +#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val) +#define FIO_POLAR PORTFIO_POLAR +#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE() +#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val) +#define FIO_EDGE PORTFIO_EDGE +#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH() +#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val) +#define FIO_BOTH PORTFIO_BOTH +#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN() +#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val) +#define FIO_INEN PORTFIO_INEN +#endif + +/* FIO USE PORT G*/ +#ifdef CONFIG_BF537_PORT_G +#define bfin_read_PORT_FER() bfin_read_PORTG_FER() +#define bfin_write_PORT_FER(val) bfin_write_PORTG_FER(val) +#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO() +#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val) +#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR() +#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val) +#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET() +#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val) +#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE() +#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val) +#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA() +#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val) +#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR() +#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val) +#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET() +#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val) +#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE() +#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val) +#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB() +#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val) +#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR() +#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val) +#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET() +#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val) +#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE() +#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val) +#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val) +#define bfin_read_FIO_POLAR() bfin_read_PORTGIO_POLAR() +#define bfin_write_FIO_POLAR(val) bfin_write_PORTGIO_POLAR(val) +#define bfin_read_FIO_EDGE() bfin_read_PORTGIO_EDGE() +#define bfin_write_FIO_EDGE(val) bfin_write_PORTGIO_EDGE(val) +#define bfin_read_FIO_BOTH() bfin_read_PORTGIO_BOTH() +#define bfin_write_FIO_BOTH(val) bfin_write_PORTGIO_BOTH(val) +#define bfin_read_FIO_INEN() bfin_read_PORTGIO_INEN() +#define bfin_write_FIO_INEN(val) bfin_write_PORTGIO_INEN(val) + +#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO() +#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val) +#define FIO_FLAG_D PORTGIO +#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR() +#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val) +#define FIO_FLAG_C PORTGIO_CLEAR +#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET() +#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val) +#define FIO_FLAG_S PORTGIO_SET +#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE() +#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val) +#define FIO_FLAG_T PORTGIO_TOGGLE +#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA() +#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val) +#define FIO_MASKA_D PORTGIO_MASKA +#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR() +#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val) +#define FIO_MASKA_C PORTGIO_MASKA_CLEAR +#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET() +#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val) +#define FIO_MASKA_S PORTGIO_MASKA_SET +#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE() +#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val) +#define FIO_MASKA_T PORTGIO_MASKA_TOGGLE +#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB() +#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val) +#define FIO_MASKB_D PORTGIO_MASKB +#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR() +#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val) +#define FIO_MASKB_C PORTGIO_MASKB_CLEAR +#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET() +#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val) +#define FIO_MASKB_S PORTGIO_MASKB_SET +#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE() +#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val) +#define FIO_MASKB_T PORTGIO_MASKB_TOGGLE +#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR() +#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val |