diff options
Diffstat (limited to 'include/asm-arm')
37 files changed, 458 insertions, 32 deletions
diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h index 0e9b7e18af0..002227924b9 100644 --- a/include/asm-arm/arch-aaec2000/aaec2000.h +++ b/include/asm-arm/arch-aaec2000/aaec2000.h @@ -17,6 +17,16 @@ #error You must include hardware.h not this file #endif /* __ASM_ARCH_HARDWARE_H */ +/* Chip selects */ +#define AAEC_CS0 0x00000000 +#define AAEC_CS1 0x10000000 +#define AAEC_CS2 0x20000000 +#define AAEC_CS3 0x30000000 + +/* Flash */ +#define AAEC_FLASH_BASE AAEC_CS0 +#define AAEC_FLASH_SIZE SZ_64M + /* Interrupt controller */ #define IRQ_BASE __REG(0x80000500) #define IRQ_INTSR __REG(0x80000500) /* Int Status Register */ @@ -148,4 +158,50 @@ #define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */ #define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */ +/* GPIO Registers */ +#define AAEC_GPIO_PHYS 0x80000e00 + +#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00) +#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04) +#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08) +#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c) +#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10) +#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14) +#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18) +#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c) +#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20) +#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24) +#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28) +#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c) +#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30) +#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34) +#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38) +#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c) +#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40) +#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44) +#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48) +#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c) +#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50) +#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54) +#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58) +#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c) +#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60) +#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64) +#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68) +#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c) +#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70) +#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74) +#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78) +#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c) +#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80) +#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84) + +#define AAEC_GPIO_PINMUX_PE0CON (1 << 0) +#define AAEC_GPIO_PINMUX_PD0CON (1 << 1) +#define AAEC_GPIO_PINMUX_CODECON (1 << 2) +#define AAEC_GPIO_PINMUX_UART3CON (1 << 3) + +/* LCD Controller */ +#define AAEC_CLCD_PHYS 0x80003000 + #endif /* __ARM_ARCH_AAEC2000_H */ diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/include/asm-arm/arch-aaec2000/aaed2000.h new file mode 100644 index 00000000000..bc76d2badb9 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/aaed2000.h @@ -0,0 +1,40 @@ +/* + * linux/include/asm-arm/arch-aaec2000/aaed2000.h + * + * AAED-2000 specific bits definition + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_AAED2000_H +#define __ASM_ARCH_AAED2000_H + +/* External GPIOs. */ + +#define EXT_GPIO_PBASE AAEC_CS3 +#define EXT_GPIO_VBASE 0xf8100000 +#define EXT_GPIO_LENGTH 0x00001000 + +#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE) +#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE) + +#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x))) +#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x))) + +#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE) + +#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */ +#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */ +#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */ +#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */ +#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */ +#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */ +#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */ +#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */ + + +#endif /* __ARM_ARCH_AAED2000_H */ diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h index 4c37219e030..153506fd06e 100644 --- a/include/asm-arm/arch-aaec2000/hardware.h +++ b/include/asm-arm/arch-aaec2000/hardware.h @@ -11,7 +11,8 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include <linux/config.h> +#include <asm/sizes.h> +#include <asm/arch/aaec2000.h> /* The kernel is loaded at physical address 0xf8000000. * We map the IO space a bit after diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h index c58a8d10425..8d67907fd4f 100644 --- a/include/asm-arm/arch-aaec2000/io.h +++ b/include/asm-arm/arch-aaec2000/io.h @@ -6,6 +6,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <asm/hardware.h> + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h index f0113bc7563..89a33287f4f 100644 --- a/include/asm-arm/arch-cl7500/io.h +++ b/include/asm-arm/arch-cl7500/io.h @@ -10,6 +10,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <asm/hardware.h> + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h index 1386871e1a5..f864c367c93 100644 --- a/include/asm-arm/arch-clps711x/hardware.h +++ b/include/asm-arm/arch-clps711x/hardware.h @@ -235,4 +235,121 @@ #define CEIVA_PB0_BLK_BTN (1<<0) #endif // #if defined (CONFIG_ARCH_CEIVA) +#if defined (CONFIG_MACH_MP1000) +/* NOR FLASH */ +#define MP1000_NIO_BASE 0xf9000000 /* virtual */ +#define MP1000_NIO_START CS0_PHYS_BASE /* physical */ +#define MP1000_NIO_SIZE 0x00400000 + +/* DSP Interface */ +#define MP1000_DSP_BASE 0xfa000000 /* virtual */ +#define MP1000_DSP_START CS1_PHYS_BASE /* physical */ +#define MP1000_DSP_SIZE 0x00100000 + +/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */ +#define MP1000_LIO_BASE 0xfb000000 /* virtual */ +#define MP1000_LIO_START CS2_PHYS_BASE /* physical */ +#define MP1000_LIO_SIZE 0x00100000 + +/* NAND FLASH */ +#define MP1000_FIO_BASE 0xfc000000 /* virtual */ +#define MP1000_FIO_START CS3_PHYS_BASE /* physical */ +#define MP1000_FIO_SIZE 0x00800000 + +/* Ethernet */ +#define MP1000_EIO_BASE 0xfd000000 /* virtual */ +#define MP1000_EIO_START CS4_PHYS_BASE /* physical */ +#define MP1000_EIO_SIZE 0x00100000 + +#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */ +#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/ +#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */ +#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */ + +/* IDE */ +#define MP1000_IDE_BASE 0xfe000000 /* virtual */ +#define MP1000_IDE_START CS5_PHYS_BASE /* physical */ +#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */ + +#define IRQ_HARDDISK IRQ_EINT2 + +/* + * IDE registers definition + */ + +#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000) +#define IDE_BASE_OFF (MP1000_IDE_BASE) + +#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0) +#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2) +#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4) +#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6) +#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8) +#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa) +#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc) +#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe) +#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc) + +#define IDE_IRQ IRQ_EINT2 + + +#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2)) +#define RTC_ALWAYS_BCD 0 + +/* +// Definitions of the bit fields in the HwPortA register for the +// MP1000 board. +*/ +#define HwPortAKeyboardRow1 0x00000001 +#define HwPortAKeyboardRow2 0x00000002 +#define HwPortAKeyboardRow3 0x00000004 +#define HwPortAKeyboardRow4 0x00000008 +#define HwPortAKeyboardRow5 0x00000010 +#define HwPortAKeyboardRow6 0x00000020 +#define HwPortALCDEnable 0x00000040 +#define HwPortAOffhook 0x00000080 + +/* +// Definitions of the bit fields in the HwPortB register for the +// MP1000 board. +*/ +#define HwPortBL3Mode 0x00000001 +#define HwPortBL3Clk 0x00000002 +#define HwPortBSClk 0x00000001 +#define HwPortBSData 0x00000002 +#define HwPortBL3Data 0x00000004 +#define HwPortBMute 0x00000008 +#define HwPortBQD0 0x00000010 +#define HwPortBQD1 0x00000020 +#define HwPortBQD2 0x00000040 +#define HwPortBQD3 0x00000080 + +/* +// Definitions of the bit fields in the HwPortD register for the +// MP1000 board. +*/ +#define HwPortDLED1 0x00000001 +#define HwPortDLED2 0x00000002 +#define HwPortDLED3 0x00000004 +#define HwPortDLED4 0x00000008 +#define HwPortDLED5 0x00000010 +#define HwPortDEECS 0x00000020 +#define HwPortBRTS 0x00000040 +#define HwPortBRI 0x00000080 + + +/* +// Definitions of the bit fields in the HwPortE register for the +// MP1000 board. +*/ + +#define HwPortECLE 0x00000001 +#define HwPortESepromDOut 0x00000001 +#define HwPortEALE 0x00000002 +#define HwPortESepromDIn 0x00000002 +#define HwPortENANDCS 0x00000004 +#define HwPortESepromCLK 0x00000004 + +#endif // #if defined (CONFIG_MACH_MP1000) + #endif diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h index 14d7e8da545..62613b0e2d9 100644 --- a/include/asm-arm/arch-clps711x/io.h +++ b/include/asm-arm/arch-clps711x/io.h @@ -20,6 +20,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <asm/hardware.h> + #define IO_SPACE_LIMIT 0xffffffff #define __io(a) ((void __iomem *)(a)) diff --git a/include/asm-arm/arch-clps711x/mp1000-seprom.h b/include/asm-arm/arch-clps711x/mp1000-seprom.h new file mode 100644 index 00000000000..3e5566cf966 --- /dev/null +++ b/include/asm-arm/arch-clps711x/mp1000-seprom.h @@ -0,0 +1,77 @@ +#ifndef MP1000_SEPROM_H +#define MP1000_SEPROM_H + +/* + * mp1000-seprom.h + * + * + * This file contains the Serial EEPROM definitions for the MP1000 board + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#define COMMAND_ERASE (0x1C0) +#define COMMAND_ERASE_ALL (0x120) +#define COMMAND_WRITE_DISABLE (0x100) +#define COMMAND_WRITE_ENABLE (0x130) +#define COMMAND_READ (0x180) +#define COMMAND_WRITE (0x140) +#define COMMAND_WRITE_ALL (0x110) + +// +// Serial EEPROM data format +// + +#define PACKED __attribute__ ((packed)) + +typedef struct _EEPROM { + union { + unsigned char eprom_byte_data[128]; + unsigned short eprom_short_data[64]; + struct { + unsigned char version PACKED; // EEPROM Version "1" for now + unsigned char box_id PACKED; // Box ID (Standalone, SOHO, embedded, etc) + unsigned char major_hw_version PACKED; // Major Hardware version (Hex) + unsigned char minor_hw_version PACKED; // Minor Hardware Version (Hex) + unsigned char mfg_id[3] PACKED; // Manufacturer ID (3 character Alphabetic) + unsigned char mfg_serial_number[10] PACKED; // Manufacturer Serial number + unsigned char mfg_date[3] PACKED; // Date of Mfg (Formatted YY:MM:DD) + unsigned char country PACKED; // Country of deployment + unsigned char mac_Address[6] PACKED; // MAC Address + unsigned char oem_string[20] PACKED; // OEM ID string + unsigned short feature_bits1 PACKED; // Feature Bits 1 + unsigned short feature_bits2 PACKED; // Feature Bits 2 + unsigned char filler[75] PACKED; // Unused/Undefined “0” initialized + unsigned short checksum PACKED; // byte accumulated short checksum + } eprom_struct; + } variant; +} eeprom_struct; + +/* These settings must be mutually exclusive */ +#define FEATURE_BITS1_DRAMSIZE_16MEG 0x0001 /* 0 signifies 4 MEG system */ +#define FEATURE_BITS1_DRAMSIZE_8MEG 0x0002 /* 1 in bit 1 = 8MEG system */ +#define FEATURE_BITS1_DRAMSIZE_64MEG 0x0004 /* 1 in bit 2 = 64MEG system */ + +#define FEATURE_BITS1_CPUIS90MEG 0x0010 + +extern void seprom_init(void); +extern eeprom_struct* get_seprom_ptr(void); +extern unsigned char* get_eeprom_mac_address(void); + +#endif /* MP1000_SEPROM_H */ + diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h index 70576b17f92..776f9d37705 100644 --- a/include/asm-arm/arch-ebsa285/io.h +++ b/include/asm-arm/arch-ebsa285/io.h @@ -14,6 +14,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <asm/hardware.h> + #define IO_SPACE_LIMIT 0xffff /* diff --git a/include/asm-arm/arch-epxa10db/io.h b/include/asm-arm/arch-epxa10db/io.h index 1f0afa25762..9fe100c9d6b 100644 --- a/include/asm-arm/arch-epxa10db/io.h +++ b/include/asm-arm/arch-epxa10db/io.h @@ -20,6 +20,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <asm/hardware.h> + #define IO_SPACE_LIMIT 0xffff diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h index 68814828c9a..d3ccfd8172b 100644 --- a/include/asm-arm/arch-h720x/io.h +++ b/include/asm-arm/arch-h720x/io.h @@ -14,7 +14,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include <asm/arch/hardware.h> +#include <asm/hardware.h> #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h index 28a4cca6a4c..b191cdd0557 100644 --- a/include/asm-arm/arch-imx/io.h +++ b/include/asm-arm/arch-imx/io.h @@ -20,6 +20,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <asm/hardware.h> + #define IO_SPACE_LIMIT 0xffffffff #define __io(a) ((void __iomem *)(a)) diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h index be2716eeaa0..6f0947bc500 100644 --- a/include/asm-arm/arch-integrator/hardware.h +++ b/include/asm-arm/arch-integrator/hardware.h @@ -33,15 +33,6 @@ #define IO_SIZE 0x0B000000 // How much? #define IO_START INTEGRATOR_HDR_BASE // PA of IO -/* - * Similar to above, but for PCI addresses (memory, IO, Config and the - * V3 chip itself). WARNING: this has to mirror definitions in platform.h - */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 - #define PCIO_BASE PCI_IO_VADDR #define PCIMEM_BASE PCI_MEMORY_VADDR diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h index fbea8be67d2..31f2deab51b 100644 --- a/include/asm-arm/arch-integrator/io.h +++ b/include/asm-arm/arch-integrator/io.h @@ -22,6 +22,14 @@ #define IO_SPACE_LIMIT 0xffff +/* + * WARNING: this has to mirror definitions in platform.h + */ +#define PCI_MEMORY_VADDR 0xe8000000 +#define PCI_CONFIG_VADDR 0xec000000 +#define PCI_V3_VADDR 0xed000000 +#define PCI_IO_VADDR 0xee000000 + #define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) #define __mem_pci(a) (a) #define __mem_isa(a) ((a) + PCI_MEMORY_VADDR) diff --git a/include/asm-arm/arch-iop3xx/io.h b/include/asm-arm/arch-iop3xx/io.h index 2761dfd8694..f39046a6ab1 100644 --- a/include/asm-arm/arch-iop3xx/io.h +++ b/include/asm-arm/arch-iop3xx/io.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <asm/hardware.h> + #define IO_SPACE_LIMIT 0xffffffff #define __io(p) ((void __iomem *)(p)) diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h index 3241cd6f077..7fbcdf9931e 100644 --- a/include/asm-arm/arch-ixp2000/io.h +++ b/include/asm-arm/arch-ixp2000/io.h @@ -15,6 +15,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <asm/hardware.h> + #define IO_SPACE_LIMIT 0xffffffff #define __mem_pci(a) (a) diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h index 32aece06986..def089d693d 100644 --- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h +++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h @@ -392,4 +392,47 @@ #define WDT_RESET_ENABLE 0x01000000 +/* + * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF + * units, but the registers that differ between the two don't overlap, + * so we can have one register list for both. + */ +#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x))) +#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000) +#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004) +#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008) +#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c) +#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010) +#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014) +#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018) +#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024) +#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028) +#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c) +#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040) +#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044) +#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048) +#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048) +#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050) +#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054) +#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058) +#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060) +#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064) +#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068) +#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070) +#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070) +#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080) +#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084) +#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088) +#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c) +#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090) +#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094) +#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098) +#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c) +#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0) +#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4) +#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8) +#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000) +#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400) + + #endif /* _IXP2000_H_ */ diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h index fc012a39e2c..cab8ad0adf0 100644 --- a/include/asm-arm/arch-l7200/io.h +++ b/include/asm-arm/arch-l7200/io.h @@ -10,7 +10,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include <asm/arch/hardware.h> +#include <asm/hardware.h> #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h index c13bdd9add9..bbcd4335f44 100644 --- a/include/asm-arm/arch-lh7a40x/io.h +++ b/include/asm-arm/arch-lh7a40x/io.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H +#include <asm/hardware.h> + #define IO_SPACE_LIMIT 0xffffffff /* No ISA or PCI bus on this machine. */ diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index 11fbf629bf7..3d5bcd54508 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -34,6 +34,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <asm/hardware.h> + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index cf35721cfa4..3e70bd95472 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -44,12 +44,12 @@ #ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile unsigned long *)io_p2v(x))) +# define __REG(x) (*((volatile u32 *)io_p2v(x))) /* With indexed regs we don't want to feed the index through io_p2v() especially if it is a variable, otherwise horrible code will result. */ # define __REG2(x,y) \ - (*(volatile unsigned long *)((unsigned long)&__REG(x) + (y))) + (*(volatile u32 *)((u32)&__REG(x) + (y))) # define __PREG(x) (io_v2p((u32)&(x))) diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h index c3bdbe44e21..eb2dd58d397 100644 --- a/include/asm-arm/arch-pxa/io.h +++ b/include/asm-arm/arch-pxa/io.h @@ -6,6 +6,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <asm/hardware.h> + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h new file mode 100644 index 00000000000..748406f384c --- /dev/null +++ b/include/asm-arm/arch-pxa/irda.h @@ -0,0 +1,17 @@ +#ifndef ASMARM_ARCH_IRDA_H +#define ASMARM_ARCH_IRDA_H + +/* board specific transceiver capabilities */ + +#define IR_OFF 1 +#define IR_SIRMODE 2 +#define IR_FIRMODE 4 + +struct pxaficp_platform_data { + int transceiver_cap; + void (*transceiver_mode)(struct device *dev, int mode); +}; + +extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); + +#endif diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 3af7165ab0d..a75a2470f4f 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -326,6 +326,25 @@ #define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ #define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ +/* Hardware UART (HWUART) */ +#define HWUART HWRBR +#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ +#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ +#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ +#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ +#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ +#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ +#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ +#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ +#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ +#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ +#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ +#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ +#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ +#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ +#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + #define IER_DMAE (1 << 7) /* DMA Requests Enable */ #define IER_UUE (1 << 6) /* UART Unit Enable */ #define IER_NRZE (1 << 5) /* NRZ coding Enable */ @@ -1013,14 +1032,12 @@ #define ICCR0_LBM (1 << 1) /* Loopback mode */ |