diff options
Diffstat (limited to 'include/asm-arm/hardware')
27 files changed, 0 insertions, 2855 deletions
diff --git a/include/asm-arm/hardware/arm_scu.h b/include/asm-arm/hardware/arm_scu.h deleted file mode 100644 index 9903f60c84b..00000000000 --- a/include/asm-arm/hardware/arm_scu.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef ASMARM_HARDWARE_ARM_SCU_H -#define ASMARM_HARDWARE_ARM_SCU_H - -/* - * SCU registers - */ -#define SCU_CTRL 0x00 -#define SCU_CONFIG 0x04 -#define SCU_CPU_STATUS 0x08 -#define SCU_INVALIDATE 0x0c -#define SCU_FPGA_REVISION 0x10 - -#endif diff --git a/include/asm-arm/hardware/arm_timer.h b/include/asm-arm/hardware/arm_timer.h deleted file mode 100644 index 04be3bdf46b..00000000000 --- a/include/asm-arm/hardware/arm_timer.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H -#define __ASM_ARM_HARDWARE_ARM_TIMER_H - -#define TIMER_LOAD 0x00 -#define TIMER_VALUE 0x04 -#define TIMER_CTRL 0x08 -#define TIMER_CTRL_ONESHOT (1 << 0) -#define TIMER_CTRL_32BIT (1 << 1) -#define TIMER_CTRL_DIV1 (0 << 2) -#define TIMER_CTRL_DIV16 (1 << 2) -#define TIMER_CTRL_DIV256 (2 << 2) -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable (versatile only) */ -#define TIMER_CTRL_PERIODIC (1 << 6) -#define TIMER_CTRL_ENABLE (1 << 7) - -#define TIMER_INTCLR 0x0c -#define TIMER_RIS 0x10 -#define TIMER_MIS 0x14 -#define TIMER_BGLOAD 0x18 - -#endif diff --git a/include/asm-arm/hardware/arm_twd.h b/include/asm-arm/hardware/arm_twd.h deleted file mode 100644 index 131d5b40e07..00000000000 --- a/include/asm-arm/hardware/arm_twd.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_HARDWARE_TWD_H -#define __ASM_HARDWARE_TWD_H - -#define TWD_TIMER_LOAD 0x00 -#define TWD_TIMER_COUNTER 0x04 -#define TWD_TIMER_CONTROL 0x08 -#define TWD_TIMER_INTSTAT 0x0C - -#define TWD_WDOG_LOAD 0x20 -#define TWD_WDOG_COUNTER 0x24 -#define TWD_WDOG_CONTROL 0x28 -#define TWD_WDOG_INTSTAT 0x2C -#define TWD_WDOG_RESETSTAT 0x30 -#define TWD_WDOG_DISABLE 0x34 - -#endif diff --git a/include/asm-arm/hardware/clps7111.h b/include/asm-arm/hardware/clps7111.h deleted file mode 100644 index 8d3228dc177..00000000000 --- a/include/asm-arm/hardware/clps7111.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * linux/include/asm-arm/hardware/clps7111.h - * - * This file contains the hardware definitions of the CLPS7111 internal - * registers. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_CLPS7111_H -#define __ASM_HARDWARE_CLPS7111_H - -#define CLPS7111_PHYS_BASE (0x80000000) - -#ifndef __ASSEMBLY__ -#define clps_readb(off) __raw_readb(CLPS7111_BASE + (off)) -#define clps_readw(off) __raw_readw(CLPS7111_BASE + (off)) -#define clps_readl(off) __raw_readl(CLPS7111_BASE + (off)) -#define clps_writeb(val,off) __raw_writeb(val, CLPS7111_BASE + (off)) -#define clps_writew(val,off) __raw_writew(val, CLPS7111_BASE + (off)) -#define clps_writel(val,off) __raw_writel(val, CLPS7111_BASE + (off)) -#endif - -#define PADR (0x0000) -#define PBDR (0x0001) -#define PDDR (0x0003) -#define PADDR (0x0040) -#define PBDDR (0x0041) -#define PDDDR (0x0043) -#define PEDR (0x0080) -#define PEDDR (0x00c0) -#define SYSCON1 (0x0100) -#define SYSFLG1 (0x0140) -#define MEMCFG1 (0x0180) -#define MEMCFG2 (0x01c0) -#define DRFPR (0x0200) -#define INTSR1 (0x0240) -#define INTMR1 (0x0280) -#define LCDCON (0x02c0) -#define TC1D (0x0300) -#define TC2D (0x0340) -#define RTCDR (0x0380) -#define RTCMR (0x03c0) -#define PMPCON (0x0400) -#define CODR (0x0440) -#define UARTDR1 (0x0480) -#define UBRLCR1 (0x04c0) -#define SYNCIO (0x0500) -#define PALLSW (0x0540) -#define PALMSW (0x0580) -#define STFCLR (0x05c0) -#define BLEOI (0x0600) -#define MCEOI (0x0640) -#define TEOI (0x0680) -#define TC1EOI (0x06c0) -#define TC2EOI (0x0700) -#define RTCEOI (0x0740) -#define UMSEOI (0x0780) -#define COEOI (0x07c0) -#define HALT (0x0800) -#define STDBY (0x0840) - -#define FBADDR (0x1000) -#define SYSCON2 (0x1100) -#define SYSFLG2 (0x1140) -#define INTSR2 (0x1240) -#define INTMR2 (0x1280) -#define UARTDR2 (0x1480) -#define UBRLCR2 (0x14c0) -#define SS2DR (0x1500) -#define SRXEOF (0x1600) -#define SS2POP (0x16c0) -#define KBDEOI (0x1700) - -/* common bits: SYSCON1 / SYSCON2 */ -#define SYSCON_UARTEN (1 << 8) - -#define SYSCON1_KBDSCAN(x) ((x) & 15) -#define SYSCON1_KBDSCANMASK (15) -#define SYSCON1_TC1M (1 << 4) -#define SYSCON1_TC1S (1 << 5) -#define SYSCON1_TC2M (1 << 6) -#define SYSCON1_TC2S (1 << 7) -#define SYSCON1_UART1EN SYSCON_UARTEN -#define SYSCON1_BZTOG (1 << 9) -#define SYSCON1_BZMOD (1 << 10) -#define SYSCON1_DBGEN (1 << 11) -#define SYSCON1_LCDEN (1 << 12) -#define SYSCON1_CDENTX (1 << 13) -#define SYSCON1_CDENRX (1 << 14) -#define SYSCON1_SIREN (1 << 15) -#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) -#define SYSCON1_ADCKSEL_MASK (3 << 16) -#define SYSCON1_EXCKEN (1 << 18) -#define SYSCON1_WAKEDIS (1 << 19) -#define SYSCON1_IRTXM (1 << 20) - -/* common bits: SYSFLG1 / SYSFLG2 */ -#define SYSFLG_UBUSY (1 << 11) -#define SYSFLG_URXFE (1 << 22) -#define SYSFLG_UTXFF (1 << 23) - -#define SYSFLG1_MCDR (1 << 0) -#define SYSFLG1_DCDET (1 << 1) -#define SYSFLG1_WUDR (1 << 2) -#define SYSFLG1_WUON (1 << 3) -#define SYSFLG1_CTS (1 << 8) -#define SYSFLG1_DSR (1 << 9) -#define SYSFLG1_DCD (1 << 10) -#define SYSFLG1_UBUSY SYSFLG_UBUSY -#define SYSFLG1_NBFLG (1 << 12) -#define SYSFLG1_RSTFLG (1 << 13) -#define SYSFLG1_PFFLG (1 << 14) -#define SYSFLG1_CLDFLG (1 << 15) -#define SYSFLG1_URXFE SYSFLG_URXFE -#define SYSFLG1_UTXFF SYSFLG_UTXFF -#define SYSFLG1_CRXFE (1 << 24) -#define SYSFLG1_CTXFF (1 << 25) -#define SYSFLG1_SSIBUSY (1 << 26) -#define SYSFLG1_ID (1 << 29) - -#define SYSFLG2_SSRXOF (1 << 0) -#define SYSFLG2_RESVAL (1 << 1) -#define SYSFLG2_RESFRM (1 << 2) -#define SYSFLG2_SS2RXFE (1 << 3) -#define SYSFLG2_SS2TXFF (1 << 4) -#define SYSFLG2_SS2TXUF (1 << 5) -#define SYSFLG2_CKMODE (1 << 6) -#define SYSFLG2_UBUSY SYSFLG_UBUSY -#define SYSFLG2_URXFE SYSFLG_URXFE -#define SYSFLG2_UTXFF SYSFLG_UTXFF - -#define LCDCON_GSEN (1 << 30) -#define LCDCON_GSMD (1 << 31) - -#define SYSCON2_SERSEL (1 << 0) -#define SYSCON2_KBD6 (1 << 1) -#define SYSCON2_DRAMZ (1 << 2) -#define SYSCON2_KBWEN (1 << 3) -#define SYSCON2_SS2TXEN (1 << 4) -#define SYSCON2_PCCARD1 (1 << 5) -#define SYSCON2_PCCARD2 (1 << 6) -#define SYSCON2_SS2RXEN (1 << 7) -#define SYSCON2_UART2EN SYSCON_UARTEN -#define SYSCON2_SS2MAEN (1 << 9) -#define SYSCON2_OSTB (1 << 12) -#define SYSCON2_CLKENSL (1 << 13) -#define SYSCON2_BUZFREQ (1 << 14) - -/* common bits: UARTDR1 / UARTDR2 */ -#define UARTDR_FRMERR (1 << 8) -#define UARTDR_PARERR (1 << 9) -#define UARTDR_OVERR (1 << 10) - -/* common bits: UBRLCR1 / UBRLCR2 */ -#define UBRLCR_BAUD_MASK ((1 << 12) - 1) -#define UBRLCR_BREAK (1 << 12) -#define UBRLCR_PRTEN (1 << 13) -#define UBRLCR_EVENPRT (1 << 14) -#define UBRLCR_XSTOP (1 << 15) -#define UBRLCR_FIFOEN (1 << 16) -#define UBRLCR_WRDLEN5 (0 << 17) -#define UBRLCR_WRDLEN6 (1 << 17) -#define UBRLCR_WRDLEN7 (2 << 17) -#define UBRLCR_WRDLEN8 (3 << 17) -#define UBRLCR_WRDLEN_MASK (3 << 17) - -#define SYNCIO_SMCKEN (1 << 13) -#define SYNCIO_TXFRMEN (1 << 14) - -#endif /* __ASM_HARDWARE_CLPS7111_H */ diff --git a/include/asm-arm/hardware/cs89712.h b/include/asm-arm/hardware/cs89712.h deleted file mode 100644 index ad99a3e1b80..00000000000 --- a/include/asm-arm/hardware/cs89712.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/hardware/cs89712.h - * - * This file contains the hardware definitions of the CS89712 - * additional internal registers. - * - * Copyright (C) 2001 Thomas Gleixner autronix automation <gleixner@autronix.de> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_CS89712_H -#define __ASM_HARDWARE_CS89712_H - -/* -* CS89712 additional registers -*/ - -#define PCDR 0x0002 /* Port C Data register ---------------------------- */ -#define PCDDR 0x0042 /* Port C Data Direction register ------------------ */ -#define SDCONF 0x2300 /* SDRAM Configuration register ---------------------*/ -#define SDRFPR 0x2340 /* SDRAM Refresh period register --------------------*/ - -#define SDCONF_ACTIVE (1 << 10) -#define SDCONF_CLKCTL (1 << 9) -#define SDCONF_WIDTH_4 (0 << 7) -#define SDCONF_WIDTH_8 (1 << 7) -#define SDCONF_WIDTH_16 (2 << 7) -#define SDCONF_WIDTH_32 (3 << 7) -#define SDCONF_SIZE_16 (0 << 5) -#define SDCONF_SIZE_64 (1 << 5) -#define SDCONF_SIZE_128 (2 << 5) -#define SDCONF_SIZE_256 (3 << 5) -#define SDCONF_CASLAT_2 (2) -#define SDCONF_CASLAT_3 (3) - -#endif /* __ASM_HARDWARE_CS89712_H */ diff --git a/include/asm-arm/hardware/debug-8250.S b/include/asm-arm/hardware/debug-8250.S deleted file mode 100644 index 4594fea91ec..00000000000 --- a/include/asm-arm/hardware/debug-8250.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/hardware/debug-8250.h - * - * Copyright (C) 1994-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/serial_reg.h> - - .macro senduart,rd,rx - strb \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - .macro waituart,rd,rx -#ifdef FLOW_CONTROL -1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] - tst \rd, #UART_MSR_CTS - beq 1001b -#endif - .endm diff --git a/include/asm-arm/hardware/debug-pl01x.S b/include/asm-arm/hardware/debug-pl01x.S deleted file mode 100644 index db0d0f7de5e..00000000000 --- a/include/asm-arm/hardware/debug-pl01x.S +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/include/asm-arm/arch-integrator/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ -#include <linux/amba/serial.h> - - .macro senduart,rd,rx - strb \rd, [\rx, #UART01x_DR] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #UART01x_FR] - tst \rd, #UART01x_FR_TXFF - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #UART01x_FR] - tst \rd, #UART01x_FR_BUSY - bne 1001b - .endm diff --git a/include/asm-arm/hardware/dec21285.h b/include/asm-arm/hardware/dec21285.h deleted file mode 100644 index 546f7077be9..00000000000 --- a/include/asm-arm/hardware/dec21285.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * linux/include/asm-arm/hardware/dec21285.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * DC21285 registers - */ -#define DC21285_PCI_IACK 0x79000000 -#define DC21285_ARMCSR_BASE 0x42000000 -#define DC21285_PCI_TYPE_0_CONFIG 0x7b000000 -#define DC21285_PCI_TYPE_1_CONFIG 0x7a000000 -#define DC21285_OUTBOUND_WRITE_FLUSH 0x78000000 -#define DC21285_FLASH 0x41000000 -#define DC21285_PCI_IO 0x7c000000 -#define DC21285_PCI_MEM 0x80000000 - -#ifndef __ASSEMBLY__ -#include <asm/hardware.h> -#define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) -#else -#define DC21285_IO(x) (x) -#endif - -#define CSR_PCICMD DC21285_IO(0x0004) -#define CSR_CLASSREV DC21285_IO(0x0008) -#define CSR_PCICACHELINESIZE DC21285_IO(0x000c) -#define CSR_PCICSRBASE DC21285_IO(0x0010) -#define CSR_PCICSRIOBASE DC21285_IO(0x0014) -#define CSR_PCISDRAMBASE DC21285_IO(0x0018) -#define CSR_PCIROMBASE DC21285_IO(0x0030) -#define CSR_MBOX0 DC21285_IO(0x0050) -#define CSR_MBOX1 DC21285_IO(0x0054) -#define CSR_MBOX2 DC21285_IO(0x0058) -#define CSR_MBOX3 DC21285_IO(0x005c) -#define CSR_DOORBELL DC21285_IO(0x0060) -#define CSR_DOORBELL_SETUP DC21285_IO(0x0064) -#define CSR_ROMWRITEREG DC21285_IO(0x0068) -#define CSR_CSRBASEMASK DC21285_IO(0x00f8) -#define CSR_CSRBASEOFFSET DC21285_IO(0x00fc) -#define CSR_SDRAMBASEMASK DC21285_IO(0x0100) -#define CSR_SDRAMBASEOFFSET DC21285_IO(0x0104) -#define CSR_ROMBASEMASK DC21285_IO(0x0108) -#define CSR_SDRAMTIMING DC21285_IO(0x010c) -#define CSR_SDRAMADDRSIZE0 DC21285_IO(0x0110) -#define CSR_SDRAMADDRSIZE1 DC21285_IO(0x0114) -#define CSR_SDRAMADDRSIZE2 DC21285_IO(0x0118) -#define CSR_SDRAMADDRSIZE3 DC21285_IO(0x011c) -#define CSR_I2O_INFREEHEAD DC21285_IO(0x0120) -#define CSR_I2O_INPOSTTAIL DC21285_IO(0x0124) -#define CSR_I2O_OUTPOSTHEAD DC21285_IO(0x0128) -#define CSR_I2O_OUTFREETAIL DC21285_IO(0x012c) -#define CSR_I2O_INFREECOUNT DC21285_IO(0x0130) -#define CSR_I2O_OUTPOSTCOUNT DC21285_IO(0x0134) -#define CSR_I2O_INPOSTCOUNT DC21285_IO(0x0138) -#define CSR_SA110_CNTL DC21285_IO(0x013c) -#define SA110_CNTL_INITCMPLETE (1 << 0) -#define SA110_CNTL_ASSERTSERR (1 << 1) -#define SA110_CNTL_RXSERR (1 << 3) -#define SA110_CNTL_SA110DRAMPARITY (1 << 4) -#define SA110_CNTL_PCISDRAMPARITY (1 << 5) -#define SA110_CNTL_DMASDRAMPARITY (1 << 6) -#define SA110_CNTL_DISCARDTIMER (1 << 8) -#define SA110_CNTL_PCINRESET (1 << 9) -#define SA110_CNTL_I2O_256 (0 << 10) -#define SA110_CNTL_I20_512 (1 << 10) -#define SA110_CNTL_I2O_1024 (2 << 10) -#define SA110_CNTL_I2O_2048 (3 << 10) -#define SA110_CNTL_I2O_4096 (4 << 10) -#define SA110_CNTL_I2O_8192 (5 << 10) -#define SA110_CNTL_I2O_16384 (6 << 10) -#define SA110_CNTL_I2O_32768 (7 << 10) -#define SA110_CNTL_WATCHDOG (1 << 13) -#define SA110_CNTL_ROMWIDTH_UNDEF (0 << 14) -#define SA110_CNTL_ROMWIDTH_16 (1 << 14) -#define SA110_CNTL_ROMWIDTH_32 (2 << 14) -#define SA110_CNTL_ROMWIDTH_8 (3 << 14) -#define SA110_CNTL_ROMACCESSTIME(x) ((x)<<16) -#define SA110_CNTL_ROMBURSTTIME(x) ((x)<<20) -#define SA110_CNTL_ROMTRISTATETIME(x) ((x)<<24) -#define SA110_CNTL_XCSDIR(x) ((x)<<28) -#define SA110_CNTL_PCICFN (1 << 31) - -/* - * footbridge_cfn_mode() is used when we want - * to check whether we are the central function - */ -#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN) -#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN) -#define footbridge_cfn_mode() __footbridge_cfn_mode() -#elif defined(CONFIG_FOOTBRIDGE_HOST) -#define footbridge_cfn_mode() (1) -#else -#define footbridge_cfn_mode() (0) -#endif - -#define CSR_PCIADDR_EXTN DC21285_IO(0x0140) -#define CSR_PREFETCHMEMRANGE DC21285_IO(0x0144) -#define CSR_XBUS_CYCLE DC21285_IO(0x0148) -#define CSR_XBUS_IOSTROBE DC21285_IO(0x014c) -#define CSR_DOORBELL_PCI DC21285_IO(0x0150) -#define CSR_DOORBELL_SA110 DC21285_IO(0x0154) -#define CSR_UARTDR DC21285_IO(0x0160) -#define CSR_RXSTAT DC21285_IO(0x0164) -#define CSR_H_UBRLCR DC21285_IO(0x0168) -#define CSR_M_UBRLCR DC21285_IO(0x016c) -#define CSR_L_UBRLCR DC21285_IO(0x0170) -#define CSR_UARTCON DC21285_IO(0x0174) -#define CSR_UARTFLG DC21285_IO(0x0178) -#define CSR_IRQ_STATUS DC21285_IO(0x0180) -#define CSR_IRQ_RAWSTATUS DC21285_IO(0x0184) -#define CSR_IRQ_ENABLE DC21285_IO(0x0188) -#define CSR_IRQ_DISABLE DC21285_IO(0x018c) -#define CSR_IRQ_SOFT DC21285_IO(0x0190) -#define CSR_FIQ_STATUS DC21285_IO(0x0280) -#define CSR_FIQ_RAWSTATUS DC21285_IO(0x0284) -#define CSR_FIQ_ENABLE DC21285_IO(0x0288) -#define CSR_FIQ_DISABLE DC21285_IO(0x028c) -#define CSR_FIQ_SOFT DC21285_IO(0x0290) -#define CSR_TIMER1_LOAD DC21285_IO(0x0300) -#define CSR_TIMER1_VALUE DC21285_IO(0x0304) -#define CSR_TIMER1_CNTL DC21285_IO(0x0308) -#define CSR_TIMER1_CLR DC21285_IO(0x030c) -#define CSR_TIMER2_LOAD DC21285_IO(0x0320) -#define CSR_TIMER2_VALUE DC21285_IO(0x0324) -#define CSR_TIMER2_CNTL DC21285_IO(0x0328) -#define CSR_TIMER2_CLR DC21285_IO(0x032c) -#define CSR_TIMER3_LOAD DC21285_IO(0x0340) -#define CSR_TIMER3_VALUE DC21285_IO(0x0344) -#define CSR_TIMER3_CNTL DC21285_IO(0x0348) -#define CSR_TIMER3_CLR DC21285_IO(0x034c) -#define CSR_TIMER4_LOAD DC21285_IO(0x0360) -#define CSR_TIMER4_VALUE DC21285_IO(0x0364) -#define CSR_TIMER4_CNTL DC21285_IO(0x0368) -#define CSR_TIMER4_CLR DC21285_IO(0x036c) - -#define TIMER_CNTL_ENABLE (1 << 7) -#define TIMER_CNTL_AUTORELOAD (1 << 6) -#define TIMER_CNTL_DIV1 (0) -#define TIMER_CNTL_DIV16 (1 << 2) -#define TIMER_CNTL_DIV256 (2 << 2) -#define TIMER_CNTL_CNTEXT (3 << 2) - - diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/include/asm-arm/hardware/entry-macro-iomd.S deleted file mode 100644 index 30c7b92c241..00000000000 --- a/include/asm-arm/hardware/entry-macro-iomd.S +++ /dev/null @@ -1,145 +0,0 @@ -/* - * arch/arm/commond/entry-macro-iomd.S - * - * Low-level IRQ helper macros for IOC/IOMD based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/* IOC / IOMD based hardware */ -#include <asm/hardware/iomd.h> - - .equ ioc_base_high, IOC_BASE & 0xff000000 - .equ ioc_base_low, IOC_BASE & 0x00ff0000 - .macro disable_fiq - mov r12, #ioc_base_high - .if ioc_base_low - orr r12, r12, #ioc_base_low - .endif - strb r12, [r12, #0x38] @ Disable FIQ register - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov r4, #ioc_base_high @ point at IOC - .if ioc_base_low - orr r4, r4, #ioc_base_low - .endif - ldrb \irqstat, [r4, #IOMD_IRQREQB] @ get high priority first - ldr \base, =irq_prio_h - teq \irqstat, #0 -#ifdef IOMD_BASE - ldreqb \irqstat, [r4, #IOMD_DMAREQ] @ get dma - addeq \base, \base, #256 @ irq_prio_h table size - teqeq \irqstat, #0 - bne 2406f -#endif - ldreqb \irqstat, [r4, #IOMD_IRQREQA] @ get low priority - addeq \base, \base, #256 @ irq_prio_d table size - teqeq \irqstat, #0 -#ifdef IOMD_IRQREQC - ldreqb \irqstat, [r4, #IOMD_IRQREQC] - addeq \base, \base, #256 @ irq_prio_l table size - teqeq \irqstat, #0 -#endif -#ifdef IOMD_IRQREQD - ldreqb \irqstat, [r4, #IOMD_IRQREQD] - addeq \base, \base, #256 @ irq_prio_lc table size - teqeq \irqstat, #0 -#endif -2406: ldrneb \irqnr, [\base, \irqstat] @ get IRQ number - .endm - -/* - * Interrupt table (incorporates priority). Please note that we - * rely on the order of these tables (see above code). - */ - .align 5 -irq_prio_h: .byte 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 - .byte 13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10 -#ifdef IOMD_BASE -irq_prio_d: .byte 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 - .byte 21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16 -#endif -irq_prio_l: .byte 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - .byte 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -#ifdef IOMD_IRQREQC -irq_prio_lc: .byte 24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 - .byte 28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 - .byte 30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 - .byte 31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31 -#endif -#ifdef IOMD_IRQREQD -irq_prio_ld: .byte 40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 - .byte 44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 - .byte 46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 - .byte 47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47 -#endif - diff --git a/include/asm-arm/hardware/ep7211.h b/include/asm-arm/hardware/ep7211.h deleted file mode 100644 index 017aa68f612..00000000000 --- a/include/asm-arm/hardware/ep7211.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/hardware/ep7211.h - * - * This file contains the hardware definitions of the EP7211 internal - * registers. - * - * Copyright (C) 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_EP7211_H -#define __ASM_HARDWARE_EP7211_H - -#include <asm/hardware/clps7111.h> - -/* - * define EP7211_BASE to be the base address of the region - * you want to access. - */ - -#define EP7211_PHYS_BASE (0x80000000) - -/* - * XXX miket@bluemug.com: need to introduce EP7211 registers (those not - * present in 7212) here. - */ - -#endif /* __ASM_HARDWARE_EP7211_H */ diff --git a/include/asm-arm/hardware/ep7212.h b/include/asm-arm/hardware/ep7212.h deleted file mode 100644 index 0e952e74707..00000000000 --- a/include/asm-arm/hardware/ep7212.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/include/asm-arm/hardware/ep7212.h - * - * This file contains the hardware definitions of the EP7212 internal - * registers. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_EP7212_H -#define __ASM_HARDWARE_EP7212_H - -/* - * define EP7212_BASE to be the base address of the region - * you want to access. - */ - -#define EP7212_PHYS_BASE (0x80000000) - -#ifndef __ASSEMBLY__ -#define ep_readl(off) __raw_readl(EP7212_BASE + (off)) -#define ep_writel(val,off) __raw_writel(val, EP7212_BASE + (off)) -#endif - -/* - * These registers are specific to the EP7212 only - */ -#define DAIR 0x2000 -#define DAIR0 0x2040 -#define DAIDR1 0x2080 -#define DAIDR2 0x20c0 -#define DAISR 0x2100 -#define SYSCON3 0x2200 -#define INTSR3 0x2240 -#define INTMR3 0x2280 -#define LEDFLSH 0x22c0 - -#define DAIR_DAIEN (1 << 16) -#define DAIR_ECS (1 << 17) -#define DAIR_LCTM (1 << 19) -#define DAIR_LCRM (1 << 20) -#define DAIR_RCTM (1 << 21) -#define DAIR_RCRM (1 << 22) -#define DAIR_LBM (1 << 23) - -#define DAIDR2_FIFOEN (1 << 15) -#define DAIDR2_FIFOLEFT (0x0d << 16) -#define DAIDR2_FIFORIGHT (0x11 << 16) - -#define DAISR_RCTS (1 << 0) -#define DAISR_RCRS (1 << 1) -#define DAISR_LCTS (1 << 2) -#define DAISR_LCRS (1 << 3) -#define DAISR_RCTU (1 << 4) -#define DAISR_RCRO (1 << 5) -#define DAISR_LCTU (1 << 6) -#define DAISR_LCRO (1 << 7) -#define DAISR_RCNF (1 << 8) -#define DAISR_RCNE (1 << 9) -#define DAISR_LCNF (1 << 10) -#define DAISR_LCNE (1 << 11) -#define DAISR_FIFO (1 << 12) - -#define SYSCON3_ADCCON (1 << 0) -#define SYSCON3_DAISEL (1 << 3) -#define SYSCON3_ADCCKNSEN (1 << 4) -#define SYSCON3_FASTWAKE (1 << 8) -#define SYSCON3_DAIEN (1 << 9) - -#endif /* __ASM_HARDWARE_EP7212_H */ diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h deleted file mode 100644 index 3fa5eb70f64..00000000000 --- a/include/asm-arm/hardware/gic.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * linux/include/asm-arm/hardware/gic.h - * - * Copyright (C) 2002 ARM Limited, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_HARDWARE_GIC_H -#define __ASM_ARM_HARDWARE_GIC_H - -#include <linux/compiler.h> - -#define GIC_CPU_CTRL 0x00 -#define GIC_CPU_PRIMASK 0x04 -#define GIC_CPU_BINPOINT 0x08 -#define GIC_CPU_INTACK 0x0c -#define GIC_CPU_EOI 0x10 -#define GIC_CPU_RUNNINGPRI 0x14 -#define GIC_CPU_HIGHPRI 0x18 - -#define GIC_DIST_CTRL 0x000 -#define GIC_DIST_CTR 0x004 -#define GIC_DIST_ENABLE_SET 0x100 -#define GIC_DIST_ENABLE_CLEAR 0x180 -#define GIC_DIST_PENDING_SET 0x200 -#define GIC_DIST_PENDING_CLEAR 0x280 -#define GIC_DIST_ACTIVE_BIT 0x300 -#define GIC_DIST_PRI 0x400 -#define GIC_DIST_TARGET 0x800 -#define GIC_DIST_CONFIG 0xc00 -#define GIC_DIST_SOFTINT 0xf00 - -#ifndef __ASSEMBLY__ -void gic_dist_init(void __iomem *base); -void gic_cpu_init(void __iomem *base); -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); -#endif - -#endif diff --git a/include/asm-arm/hardware/icst307.h b/include/asm-arm/hardware/icst307.h deleted file mode 100644 index ff8618a441c..00000000000 --- a/include/asm-arm/hardware/icst307.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/hardware/icst307.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICS307 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - * - * This file is similar to the icst525.h file - */ -#ifndef ASMARM_HARDWARE_ICST307_H -#define ASMARM_HARDWARE_ICST307_H - -struct icst307_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst307_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco); -struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq); -struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period); - -#endif diff --git a/include/asm-arm/hardware/icst525.h b/include/asm-arm/hardware/icst525.h deleted file mode 100644 index edd5a570440..00000000000 --- a/include/asm-arm/hardware/icst525.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/hardware/icst525.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST525 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - */ -#ifndef ASMARM_HARDWARE_ICST525_H -#define ASMARM_HARDWARE_ICST525_H - -struct icst525_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst525_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco); -struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq); -struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period); - -#endif diff --git a/include/asm-arm/hardware/ioc.h b/include/asm-arm/hardware/ioc.h deleted file mode 100644 index b3b46ef6594..00000000000 --- a/include/asm-arm/hardware/ioc.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * linux/include/asm-arm/hardware/ioc.h - * - * Copyright (C) Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Use these macros to read/write the IOC. All it does is perform the actual - * read/write. - */ -#ifndef __ASMARM_HARDWARE_IOC_H -#define __ASMARM_HARDWARE_IOC_H - -#ifndef __ASSEMBLY__ - -/* - * We use __raw_base variants here so that we give the compiler the - * chance to keep IOC_BASE in a register. - */ -#define ioc_readb(off) __raw_readb(IOC_BASE + (off)) -#define ioc_writeb(val,off) __raw_writeb(val, IOC_BASE + (off)) - -#endif - -#define IOC_CONTROL (0x00) -#define IOC_KARTTX (0x04) -#define IOC_KARTRX (0x04) - -#define IOC_IRQSTATA (0x10) -#define IOC_IRQREQA (0x14) -#define IOC_IRQCLRA (0x14) -#define IOC_IRQMASKA (0x18) - -#define IOC_IRQSTATB (0x20) -#define IOC_IRQREQB (0x24) -#define IOC_IRQMASKB (0x28) - -#define IOC_FIQSTAT (0x30) -#define IOC_FIQREQ (0x34) -#define IOC_FIQMASK (0x38) - -#define IOC_T0CNTL (0x40) -#define IOC_T0LTCHL (0x40) -#define IOC_T0CNTH (0x44) -#define IOC_T0LTCHH (0x44) -#define IOC_T0GO (0x48) -#define IOC_T0LATCH (0x4c) - -#define IOC_T1CNTL (0x50) -#define IOC_T1LTCHL (0x50) -#define IOC_T1CNTH (0x54) -#define IOC_T1LTCHH (0x54) -#define IOC_T1GO (0x58) -#define IOC_T1LATCH (0x5c) - -#define IOC_T2CNTL (0x60) -#define IOC_T2LTCHL (0x60) -#define IOC_T2CNTH (0x64) -#define IOC_T2LTCHH (0x64) -#define IOC_T2GO (0x68) -#define IOC_T2LATCH (0x6c) - -#define IOC_T3CNTL (0x70) -#define IOC_T3LTCHL (0x70) -#define IOC_T3CNTH (0x74) -#define IOC_T3LTCHH (0x74) -#define IOC_T3GO (0x78) -#define IOC_T3LATCH (0x7c) - -#endif diff --git a/include/asm-arm/hardware/iomd.h b/include/asm-arm/hardware/iomd.h deleted file mode 100644 index 396e55ad06c..00000000000 --- a/include/asm-arm/hardware/iomd.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * linux/include/asm-arm/hardware/iomd.h - * - * Copyright (C) 1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains information out the IOMD ASIC used in the - * Acorn RiscPC and subsequently integrated into the CLPS7500 chips. - */ -#ifndef __ASMARM_HARDWARE_IOMD_H -#define __ASMARM_HARDWARE_IOMD_H - - -#ifndef __ASSEMBLY__ - -/* - * We use __raw_base variants here so that we give the compiler the - * chance to keep IOC_BASE in a register. - */ -#define iomd_readb(off) __raw_readb(IOMD_BASE + (off)) -#define iomd_readl(off) __raw_readl(IOMD_BASE + (off)) -#define iomd_writeb(val,off) __raw_writeb(val, IOMD_BASE + (off)) -#define iomd_writel(val,off) __raw_writel(val, IOMD_BASE + (off)) - -#endif - -#define IOMD_CONTROL (0x000) -#define IOMD_KARTTX (0x004) -#define IOMD_KARTRX (0x004) -#define IOMD_KCTRL (0x008) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_IOLINES (0x00C) -#endif - -#define IOMD_IRQSTATA (0x010) -#define IOMD_IRQREQA (0x014) -#define IOMD_IRQCLRA (0x014) -#define IOMD_IRQMASKA (0x018) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_SUSMODE (0x01C) -#endif - -#define IOMD_IRQSTATB (0x020) -#define IOMD_IRQREQB (0x024) -#define IOMD_IRQMASKB (0x028) - -#define IOMD_FIQSTAT (0x030) -#define IOMD_FIQREQ (0x034) -#define IOMD_FIQMASK (0x038) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_CLKCTL (0x03C) -#endif - -#define IOMD_T0CNTL (0x040) -#define IOMD_T0LTCHL (0x040) -#define IOMD_T0CNTH (0x044) -#define IOMD_T0LTCHH (0x044) -#define IOMD_T0GO (0x048) -#define IOMD_T0LATCH (0x04c) - -#define IOMD_T1CNTL (0x050) -#define IOMD_T1LTCHL (0x050) -#define IOMD_T1CNTH (0x054) -#define IOMD_T1LTCHH (0x054) -#define IOMD_T1GO (0x058) -#define IOMD_T1LATCH (0x05c) - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_IRQSTATC (0x060) -#define IOMD_IRQREQC (0x064) -#define IOMD_IRQMASKC (0x068) - -#define IOMD_VIDMUX (0x06c) - -#define IOMD_IRQSTATD (0x070) -#define IOMD_IRQREQD (0x074) -#define IOMD_IRQMASKD (0x078) -#endif - -#define IOMD_ROMCR0 (0x080) -#define IOMD_ROMCR1 (0x084) -#ifdef CONFIG_ARCH_RPC -#define IOMD_DRAMCR (0x088) -#endif -#define IOMD_REFCR (0x08C) - -#define IOMD_FSIZE (0x090) -#define IOMD_ID0 (0x094) -#define IOMD_ID1 (0x098) -#define IOMD_VERSION (0x09C) - -#ifdef CONFIG_ARCH_RPC -#define IOMD_MOUSEX (0x0A0) -#define IOMD_MOUSEY (0x0A4) -#endif - -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_MSEDAT (0x0A8) -#define IOMD_MSECTL (0x0Ac) -#endif - -#ifdef CONFIG_ARCH_RPC -#define IOMD_DMATCR (0x0C0) -#endif -#define IOMD_IOTCR (0x0C4) -#define IOMD_ECTCR (0x0C8) -#ifdef CONFIG_ARCH_RPC -#define IOMD_DMAEXT (0x0CC) -#endif -#ifdef CONFIG_ARCH_CLPS7500 -#define IOMD_ASTCR (0x0CC) -#define IOMD_DRAMCR (0x0D0) -#define IOMD_SELFREF (0x0D4) -#define IOMD_ATODICR (0x0E0) -#define IOMD_ATODSR (0x0E4) -#define IOMD_ATODCC (0x0E8) -#define IOMD_ATODCNT1 (0x0EC) -#define IOMD_ATODCNT2 (0x0F0) -#define IOMD_ATODCNT3 (0x0F4) -#define IOMD_ATODCNT4 (0x0F8) -#endif - -#ifdef CONFIG_ARCH_RPC -#define DMA_EXT_IO0 1 -#define DMA_EXT_IO1 2 -#define DMA_EXT_IO2 4 -#define DMA_EXT_IO3 8 - -#define IOMD_IO0CURA (0x100) -#define IOMD_IO0ENDA (0x104) -#define IOMD_IO0CURB (0x108) -#define IOMD_IO0ENDB (0x10C) -#define IOMD_IO0CR (0x110) -#define IOMD_IO0ST (0x114) - -#define IOMD_IO1CURA (0x120) -#define IOMD_IO1ENDA (0x124) -#define IOMD_IO1CURB (0x128) -#define IOMD_IO1ENDB (0x12C) -#define IOMD_IO1CR (0x130) -#define IOMD_IO1ST (0x134) - -#define IOMD_IO2CURA (0x140) -#define IOMD_IO2ENDA (0x144) -#define IOMD_IO2CURB (0x148) -#define IOMD_IO2ENDB (0x14C) -#define IOMD_IO2CR (0x150) -#define IOMD_IO2ST (0x154) - -#define IOMD_IO3CURA (0x160) -#define IOMD_IO3ENDA (0x164) -#define IOMD_IO3CURB (0x168) -#define IOMD_IO3ENDB (0x16C) -#define IOMD_IO3CR (0x170) -#define IOMD_IO3ST (0x174) -#endif - -#define IOMD_SD0CURA (0x180) -#define IOMD_SD0ENDA (0x184) -#define IOMD_SD0CURB (0x188) -#define IOMD_SD0ENDB (0x18C) -#define IOMD_SD0CR (0x190) -#define IOMD_SD0ST (0x194) - -#ifdef CONFIG_ARCH_RPC -#define IOMD_SD1CURA (0x1A0) -#define IOMD_SD1ENDA (0x1A4) -#define IOMD_SD1CURB (0x1A8) -#define IOMD_SD1ENDB (0x1AC) -#define IOMD_SD1CR (0x1B0) -#define IOMD_SD1ST (0x1B4) -#endif - -#define IOMD_CURSCUR (0x1C0) -#define IOMD_CURSINIT (0x1C4) - -#define IOMD_VIDCUR (0x1D0) -#define IOMD_VIDEND (0x1D4) -#define IOMD_VIDSTART (0x1D8) -#define IOMD_VIDINIT (0x1DC) -#define IOMD_VIDCR (0x1E0) - -#define IOMD_DMASTAT (0x1F0) -#define IOMD_DMAREQ (0x1F4) -#define IOMD_DMAMASK (0x1F8) - -#define DMA_END_S (1 << 31) -#define DMA_END_L (1 << 30) - -#define DMA_CR_C 0x80 -#define DMA_CR_D 0x40 -#define DMA_CR_E 0x20 - -#define DMA_ST_OFL 4 -#define DMA_ST_INT 2 -#define DMA_ST_AB 1 - -/* - * DMA (MEMC) compatibility - */ -#define HALF_SAM vram_half_sam -#define VDMA_ALIGNMENT (HALF_SAM * 2) -#define VDMA_XFERSIZE (HALF_SAM) -#define VDMA_INIT IOMD_VIDINIT -#define VDMA_START IOMD_VIDSTART -#define VDMA_END IOMD_VIDEND - -#ifndef __ASSEMBLY__ -extern unsigned int vram_half_sam; -#define video_set_dma(start,end,offset) \ -do { \ - outl (SCREEN_START + start, VDMA_START); \ - outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END); \ - if (offset >= end - VDMA_XFERSIZE) \ - offset |= 0x40000000; \ - outl (SCREEN_START + offset, VDMA_INIT); \ -} while (0) -#endif - -#endif diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h deleted file mode 100644 index 1018a7486ab..00000000000 --- a/include/asm-arm/hardware/iop3xx.h +++ /dev/null @@ -1,301 +0,0 @@ -/* - * include/asm-arm/hardware/iop3xx.h - * - * Intel IOP32X and IOP33X register definitions - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IOP3XX_H -#define __IOP3XX_H - -/* - * IOP3XX GPIO handling - */ -#define GPIO_IN 0 -#define GPIO_OUT 1 -#define GPIO_LOW 0 -#define GPIO_HIGH 1 -#define IOP3XX_GPIO_LINE(x) (x) - -#ifndef __ASSEMBLY__ -extern void gpio_line_config(int line, int direction); -extern int gpio_line_get(int line); -extern void gpio_line_set(int line, int value); -#endif - - -/* - * IOP3XX processor registers - */ -#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000 -#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000 -#define IOP3XX_PERIPHERAL_SIZE 0x00002000 -#define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg)) - -/* Address Translation Unit */ -#define IOP3XX_ATUVID (volatile u16 *)IOP3XX_REG_ADDR(0x0100) -#define IOP3XX_ATUDID (volatile u16 *)IOP3XX_REG_ADDR(0x0102) -#define IOP3XX_ATUCMD (volatile u16 *)IOP3XX_REG_ADDR(0x0104) -#define IOP3XX_ATUSR (volatile u16 *)IOP3XX_REG_ADDR(0x0106) -#define IOP3XX_ATURID (volatile u8 *)IOP3XX_REG_ADDR(0x0108) -#define IOP3XX_ATUCCR (volatile u32 *)IOP3XX_REG_ADDR(0x0109) -#define IOP3XX_ATUCLSR (volatile u8 *)IOP3XX_REG_ADDR(0x010c) -#define IOP3XX_ATULT (volatile u8 *)IOP3XX_REG_ADDR(0x010d) -#define IOP3XX_ATUHTR (volatile u8 *)IOP3XX_REG_ADDR(0x010e) -#define IOP3XX_ATUBIST (volatile u8 *)IOP3XX_REG_ADDR(0x010f) -#define IOP3XX_IABAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0110) -#define IOP3XX_IAUBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0114) -#define IOP3XX_IABAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0118) -#define IOP3XX_IAUBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x011c) -#define IOP3XX_IABAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0120) -#define IOP3XX_IAUBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0124) -#define IOP3XX_ASVIR (volatile u16 *)IOP3XX_REG_ADDR(0x012c) -#define IOP3XX_ASIR (volatile u16 *)IOP3XX_REG_ADDR(0x012e) -#define IOP3XX_ERBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0130) -#define IOP3XX_ATUILR (volatile u8 *)IOP3XX_REG_ADDR(0x013c) -#define IOP3XX_ATUIPR (volatile u8 *)IOP3XX_REG_ADDR(0x013d) -#define IOP3XX_ATUMGNT (volatile u8 *)IOP3XX_REG_ADDR(0x013e) -#define IOP3XX_ATUMLAT (volatile u8 *)IOP3XX_REG_ADDR(0x013f) -#define IOP3XX_IALR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0140) -#define IOP3XX_IATVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0144) -#define IOP3XX_ERLR (volatile u32 *)IOP3XX_REG_ADDR(0x0148) -#define IOP3XX_ERTVR (volatile u32 *)IOP3XX_REG_ADDR(0x014c) -#define IOP3XX_IALR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0150) -#define IOP3XX_IALR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0154) -#define IOP3XX_IATVR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0158) -#define IOP3XX_OIOWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x015c) -#define IOP3XX_OMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0160) -#define IOP3XX_OUMWTVR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0164) -#define IOP3XX_OMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0168) -#define IOP3XX_OUMWTVR1 (volatile u32 *)IOP3XX_REG_ADDR(0x016c) -#define IOP3XX_OUDWTVR (volatile u32 *)IOP3XX_REG_ADDR(0x0178) -#define IOP3XX_ATUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0180) -#define IOP3XX_PCSR (volatile u32 *)IOP3XX_REG_ADDR(0x0184) -#define IOP3XX_ATUISR (volatile u32 *)IOP3XX_REG_ADDR(0x0188) -#define IOP3XX_ATUIMR (volatile u32 *)IOP3XX_REG_ADDR(0x018c) -#define IOP3XX_IABAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0190) -#define IOP3XX_IAUBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0194) -#define IOP3XX_IALR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0198) -#define IOP3XX_IATVR3 (volatile u32 *)IOP3XX_REG_ADDR(0x019c) -#define IOP3XX_OCCAR (volatile u32 *)IOP3XX_REG_ADDR(0x01a4) -#define IOP3XX_OCCDR (volatile u32 *)IOP3XX_REG_ADDR(0x01ac) -#define IOP3XX_PDSCR (volatile u32 *)IOP3XX_REG_ADDR(0x01bc) -#define IOP3XX_PMCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01c0) -#define IOP3XX_PMNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01c1) -#define IOP3XX_APMCR (volatile u16 *)IOP3XX_REG_ADDR(0x01c2) -#define IOP3XX_APMCSR (volatile u16 *)IOP3XX_REG_ADDR(0x01c4) -#define IOP3XX_PCIXCAPID (volatile u8 *)IOP3XX_REG_ADDR(0x01e0) -#define IOP3XX_PCIXNEXT (volatile u8 *)IOP3XX_REG_ADDR(0x01e1) -#define IOP3XX_PCIXCMD (volatile u16 *)IOP3XX_REG_ADDR(0x01e2) -#define IOP3XX_PCIXSR (volatile u32 *)IOP3XX_REG_ADDR(0x01e4) -#define IOP3XX_PCIIRSR (volatile u32 *)IOP3XX_REG_ADDR(0x01ec) - -/* Messaging Unit */ -#define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310) -#define IOP3XX_IMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0314) -#define IOP3XX_OMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0318) -#define IOP3XX_OMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x031c) -#define IOP3XX_IDR (volatile u32 *)IOP3XX_REG_ADDR(0x0320) -#define IOP3XX_IISR (volatile u32 *)IOP3XX_REG_ADDR(0x0324) -#define IOP3XX_IIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0328) -#define IOP3XX_ODR (volatile u32 *)IOP3XX_REG_ADDR(0x032c) -#define IOP3XX_OISR (volatile u32 *)IOP3XX_REG_ADDR(0x0330) -#define IOP3XX_OIMR (volatile u32 *)IOP3XX_REG_ADDR(0x0334) -#define IOP3XX_MUCR (volatile u32 *)IOP3XX_REG_ADDR(0x0350) -#define IOP3XX_QBAR (volatile u32 *)IOP3XX_REG_ADDR(0x0354) -#define IOP3XX_IFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0360) -#define IOP3XX_IFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0364) -#define IOP3XX_IPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0368) -#define IOP3XX_IPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x036c) -#define IOP3XX_OFHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0370) -#define IOP3XX_OFTPR (volatile u32 *)IOP3XX_REG_ADDR(0x0374) -#define IOP3XX_OPHPR (volatile u32 *)IOP3XX_REG_ADDR(0x0378) -#define IOP3XX_OPTPR (volatile u32 *)IOP3XX_REG_ADDR(0x037c) -#define IOP3XX_IAR (volatile u32 *)IOP3XX_REG_ADDR(0x0380) - -/* DMA Controller */ -#define IOP3XX_DMA0_CCR (volatile u32 *)IOP3XX_REG_ADDR(0x0400) -#define IOP3XX_DMA0_CSR (volatile u32 *)IOP3XX_REG_ADDR(0x0404) -#define IOP3XX_DMA0_DAR (volatile u32 *)IOP3XX_REG_ADDR(0x040c) -#define IOP3XX_DMA0_NDAR (volatile u32 *)IOP3XX_REG_ADDR(0x0410) -#define IOP3XX_DMA0_PADR (volatile u32 *)IOP3XX_REG_ADDR(0x0414) -#define IOP3XX_DMA0_PUADR (volatile u32 *)IOP3XX_REG_ADDR(0x0418) -#define IOP3XX_DMA0_LADR (volatile u32 *)IOP3XX_REG_ADDR(0x041c) -#define IOP3XX_DMA0_BCR (volatile u32 *)IOP3XX_REG_ADDR(0x0420) -#define IOP3XX_DMA0_DCR (volatile u32 *)IOP3XX_REG_ADDR(0x0424) -#define IOP3XX_DMA1_CCR (volatile u32 *)IOP3XX_REG_ADDR(0x0440) -#define IOP3XX_DMA1_CSR (volatile u32 *)IOP3XX_REG_ADDR(0x0444) -#define IOP3XX_DMA1_DAR (volatile u32 *)IOP3XX_REG_ADDR(0x044c) -#define IOP3XX_DMA1_NDAR (volatile u32 *)IOP3XX_REG_ADDR(0x0450) -#define IOP3XX_DMA1_PADR (volatile u32 *)IOP3XX_REG_ADDR(0x0454) -#define IOP3XX_DMA1_PUADR (volatile u32 *)IOP3XX_REG_ADDR(0x0458) -#define IOP3XX_DMA1_LADR (volatile u32 *)IOP3XX_REG_ADDR(0x045c) -#define IOP3XX_DMA1_BCR (volatile u32 *)IOP3XX_REG_ADDR(0x0460) -#define IOP3XX_DMA1_DCR (volatile u32 *)IOP3XX_REG_ADDR(0x0464) - -/* Peripheral bus interface */ -#define IOP3XX_PBCR (volatile u32 *)IOP3XX_REG_ADDR(0x0680) -#define IOP3XX_PBISR (volatile u32 *)IOP3XX_REG_ADDR(0x0684) -#define IOP3XX_PBBAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0688) -#define IOP3XX_PBLR0 (volatile u32 *)IOP3XX_REG_ADDR(0x068c) -#define IOP3XX_PBBAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0690) -#define IOP3XX_PBLR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0694) -#define IOP3XX_PBBAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0698) -#define IOP3XX_PBLR2 (volatile u32 *)IOP3XX_REG_ADDR(0x069c) -#define IOP3XX_PBBAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a0) -#define IOP3XX_PBLR3 (volatile u32 *)IOP3XX_REG_ADDR(0x06a4) -#define IOP3XX_PBBAR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06a8) -#define IOP3XX_PBLR4 (volatile u32 *)IOP3XX_REG_ADDR(0x06ac) -#define IOP3XX_PBBAR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b0) -#define IOP3XX_PBLR5 (volatile u32 *)IOP3XX_REG_ADDR(0x06b4) -#define IOP3XX_PMBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x06c0) -#define IOP3XX_PMBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x06e0) -#define IOP3XX_PMBR2 (volatile u32 *)IOP3XX_REG_ADDR(0x06e4) - -/* Peripheral performance monitoring unit */ -#define IOP3XX_GTMR (volatile u32 *)IOP3XX_REG_ADDR(0x0700) -#define IOP3XX_ESR (volatile u32 *)IOP3XX_REG_ADDR(0x0704) -#define IOP3XX_EMISR (volatile u32 *)IOP3XX_REG_ADDR(0x0708) -#define IOP3XX_GTSR (volatile u32 *)IOP3XX_REG_ADDR(0x0710) -/* PERCR0 DOESN'T EXIST - index from 1! */ -#define IOP3XX_PERCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0710) - -/* General Purpose I/O */ -#define IOP3XX_GPOE (volatile u32 *)IOP3XX_GPIO_REG(0x0004) -#define IOP3XX_GPID (volatile u32 *)IOP3XX_GPIO_REG(0x0008) -#define IOP3XX_GPOD (volatile u32 *)IOP3XX_GPIO_REG(0x000c) - -/* Timers */ -#define IOP3XX_TU_TMR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0000) -#define IOP3XX_TU_TMR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0004) -#define IOP3XX_TU_TCR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0008) -#define IOP3XX_TU_TCR1 (volatile u32 *)IOP3XX_TIMER_REG(0x000c) -#define IOP3XX_TU_TRR0 (volatile u32 *)IOP3XX_TIMER_REG(0x0010) -#define IOP3XX_TU_TRR1 (volatile u32 *)IOP3XX_TIMER_REG(0x0014) -#define IOP3XX_TU_TISR (volatile u32 *)IOP3XX_TIMER_REG(0x0018) -#define IOP3XX_TU_WDTCR (volatile u32 *)IOP3XX_TIMER_REG(0x001c) -#define IOP3XX_TMR_TC 0x01 -#define IOP3XX_TMR_EN 0x02 -#define IOP3XX_TMR_RELOAD 0x04 -#define IOP3XX_TMR_PRIVILEGED 0x09 -#define IOP3XX_TMR_RATIO_1_1 0x00 -#define IOP3XX_TMR_RATIO_4_1 0x10 -#define IOP3XX_TMR_RATIO_8_1 0x20 -#define IOP3XX_TMR_RATIO_16_1 0x30 - -/* Application accelerator unit */ -#define IOP3XX_AAU_ACR (volatile u32 *)IOP3XX_REG_ADDR(0x0800) -#define IOP3XX_AAU_ASR (volatile u32 *)IOP3XX_REG_ADDR(0x0804) -#define IOP3XX_AAU_ADAR (volatile u32 *)IOP3XX_REG_ADDR(0x0808) -#define IOP3XX_AAU_ANDAR (volatile u32 *)IOP3XX_REG_ADDR(0x080c) -#define IOP3XX_AAU_SAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0810) -#define IOP3XX_AAU_SAR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0814) -#define IOP3XX_AAU_SAR3 (volatile u32 *)IOP3XX_REG_ADDR(0x0818) -#define IOP3XX_AAU_SAR4 (volatile u32 *)IOP3XX_REG_ADDR(0x081c) -#define IOP3XX_AAU_DAR (volatile u32 *)IOP3XX_REG_ADDR(0x0820) -#define IOP3XX_AAU_ABCR (volatile u32 *)IOP3XX_REG_ADDR(0x0824) -#define IOP3XX_AAU_ADCR (volatile u32 *)IOP3XX_REG_ADDR(0x0828) -#define IOP3XX_AAU_SAR5 (volatile u32 *)IOP3XX_REG_ADDR(0x082c) -#define IOP3XX_AAU_SAR6 (volatile u32 *)IOP3XX_REG_ADDR(0x0830) -#define IOP3XX_AAU_SAR7 (volatile u32 *)IOP3XX_REG_ADDR(0x0834) -#define IOP3XX_AAU_SAR8 (volatile u32 *)IOP3XX_REG_ADDR(0x0838) -#define IOP3XX_AAU_EDCR0 (volatile u32 *)IOP3XX_REG_ADDR(0x083c) -#define IOP3XX_AAU_SAR9 (volatile u32 *)IOP3XX_REG_ADDR(0x0840) -#define IOP3XX_AAU_SAR10 (volatile u32 *)IOP3XX_REG_ADDR(0x0844) -#define IOP3XX_AAU_SAR11 (volatile u32 *)IOP3XX_REG_ADDR(0x0848) -#define IOP3XX_AAU_SAR12 (volatile u32 *)IOP3XX_REG_ADDR(0x084c) -#define IOP3XX_AAU_SAR13 (volatile u32 *)IOP3XX_REG_ADDR(0x0850) -#define IOP3XX_AAU_SAR14 (volatile u32 *)IOP3XX_REG_ADDR(0x0854) -#define IOP3XX_AAU_SAR15 (volatile u32 *)IOP3XX_REG_ADDR(0x0858) -#define IOP3XX_AAU_SAR16 (volatile u32 *)IOP3XX_REG_ADDR(0x085c) -#define IOP3XX_AAU_EDCR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0860) -#define IOP3XX_AAU_SAR17 (volatile u32 *)IOP3XX_REG_ADDR(0x0864) -#define IOP3XX_AAU_SAR18 (volatile u32 *)IOP3XX_REG_ADDR(0x0868) -#define IOP3XX_AAU_SAR19 (volatile u32 *)IOP3XX_REG_ADDR(0x086c) -#define IOP3XX_AAU_SAR20 (volatile u32 *)IOP3XX_REG_ADDR(0x0870) -#define IOP3XX_AAU_SAR21 (volatile u32 *)IOP3XX_REG_ADDR(0x0874) -#define IOP3XX_AAU_SAR22 (volatile u32 *)IOP3XX_REG_ADDR(0x0878) -#define IOP3XX_AAU_SAR23 (volatile u32 *)IOP3XX_REG_ADDR(0x087c) -#define IOP3XX_AAU_SAR24 (volatile u32 *)IOP3XX_REG_ADDR(0x0880) -#define IOP3XX_AAU_EDCR2 (volatile u32 *)IOP3XX_REG_ADDR(0x0884) -#define IOP3XX_AAU_SAR25 (volatile u32 *)IOP3XX_REG_ADDR(0x0888) -#define IOP3XX_AAU_SAR26 (volatile u32 *)IOP3XX_REG_ADDR(0x088c) -#define IOP3XX_AAU_SAR27 (volatile u32 *)IOP3XX_REG_ADDR(0x0890) -#define IOP3XX_AAU_SAR28 (volatile u32 *)IOP3XX_REG_ADDR(0x0894) -#define IOP3XX_AAU_SAR29 (volatile u32 *)IOP3XX_REG_ADDR(0x0898) -#define IOP3XX_AAU_SAR30 (volatile u32 *)IOP3XX_REG_ADDR(0x089c) -#define IOP3XX_AAU_SAR31 (volatile u32 *)IOP3XX_REG_ADDR(0x08a0) -#define IOP3XX_AAU_SAR32 (volatile u32 *)IOP3XX_REG_ADDR(0x08a4) - -/* I2C bus interface unit */ -#define IOP3XX_ICR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1680) -#define IOP3XX_ISR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1684) -#define IOP3XX_ISAR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1688) -#define IOP3XX_IDBR0 (volatile u32 *)IOP3XX_REG_ADDR(0x168c) -#define IOP3XX_IBMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x1694) -#define IOP3XX_ICR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a0) -#define IOP3XX_ISR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a4) -#define IOP3XX_ISAR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16a8) -#define IOP3XX_IDBR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16ac) -#define IOP3XX_IBMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x16b4) - - -/* - * IOP3XX I/O and Mem space regions for PCI autoconfiguration - */ -#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x04000000 -#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 -#define IOP3XX_PCI_LOWER_MEM_BA (*IOP3XX_OMWTVR0) - -#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 -#define IOP3XX_PCI_LOWER_IO_PA 0x90000000 -#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 -#define IOP3XX_PCI_LOWER_IO_BA (*IOP3XX_OIOWTVR) - - -#ifndef __ASSEMBLY__ -void iop3xx_map_io(void); -void iop3xx_init_time(unsigned long); -unsigned long iop3xx_gettimeoffset(void); - -extern struct platform_device iop3xx_i2c0_device; -extern struct platform_device iop3xx_i2c1_device; - -extern inline void iop3xx_cp6_enable(void) -{ - u32 temp; - - asm volatile ( - "mrc p15, 0, %0, c15, c1, 0\n\t" - "orr %0, %0, #(1 << 6)\n\t" - "mcr p15, 0, %0, c15, c1, 0\n\t" - "mrc p15, 0, %0, c15, c1, 0\n\t" - "mov %0, %0\n\t" - "sub pc, pc, #4\n\t" - : "=r" (temp) ); -} - -extern inline void iop3xx_cp6_disable(void) -{ - u32 temp; - - asm volatile ( - "mrc p15, 0, %0, c15, c1, 0\n\t" - "bic %0, %0, #(1 << 6)\n\t" - "mcr p15, 0, %0, c15, c1, 0\n\t" - "mrc p15, 0, %0, c15, c1, 0\n\t" - "mov %0, %0\n\t" - "sub pc, pc, #4\n\t" - : "=r" (temp) ); -} -#endif - - -#endif diff --git a/include/asm-arm/hardware/linkup-l1110.h b/include/asm-arm/hardware/linkup-l1110.h deleted file mode 100644 index 7ec91168a57..00000000000 --- a/include/asm-arm/hardware/linkup-l1110.h +++ /dev/null @@ -1,48 +0,0 @@ -/* -* -* Definitions for H3600 Handheld Computer -* -* Copyright 2001 Compaq Computer Corporation. -* -* Use consistent with the GNU GPL is permitted, -* provided that this copyright notice is -* preserved in its entirety in all copies and derived works. -* -* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, -* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS -* FITNESS FOR ANY PARTICULAR PURPOSE. -* -* Author: Jamey Hicks. -* -*/ - -/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */ - -/* PC Card Status Register */ -#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */ -#define LINKUP_PRS_S2 (1 << 1) -#define LINKUP_PRS_S3 (1 << 2) -#define LINKUP_PRS_S4 (1 << 3) -#define LINKUP_PRS_BVD1 (1 << 4) -#define LINKUP_PRS_BVD2 (1 << 5) -#define LINKUP_PRS_VS1 (1 << 6) -#define LINKUP_PRS_VS2 (1 << 7) -#define LINKUP_PRS_RDY (1 << 8) -#define LINKUP_PRS_CD1 (1 << 9) -#define LINKUP_PRS_CD2 (1 << 10) - -/* PC Card Command Register */ -#define LINKUP_PRC_S1 (1 << 0) -#define LINKUP_PRC_S2 (1 << 1) -#define LINKUP_PRC_S3 (1 << 2) -#define LINKUP_PRC_S4 (1 << 3) -#define LINKUP_PRC_RESET (1 << 4) -#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */ -#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */ -#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */ -#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */ -#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */ - -struct linkup_l1110 { - volatile short prc; -}; diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h deleted file mode 100644 index adab77780ed..00000000000 --- a/include/asm-arm/hardware/locomo.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - * linux/include/asm-arm/hardware/locomo.h - * - * This file contains the definitions for the LoCoMo G/A Chip - * - * (C) Copyright 2004 John Lenz - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Based on sa1111.h - */ -#ifndef _ASM_ARCH_LOCOMO -#define _ASM_ARCH_LOCOMO - -#define locomo_writel(val,addr) ({ *(volatile u16 *)(addr) = (val); }) -#define locomo_readl(addr) (*(volatile u16 *)(addr)) - -/* LOCOMO version */ -#define LOCOMO_VER 0x00 - -/* Pin status */ -#define LOCOMO_ST 0x04 - -/* Pin status */ -#define LOCOMO_C32K 0x08 - -/* Interrupt controller */ -#define LOCOMO_ICR 0x0C - -/* MCS decoder for boot selecting */ -#define LOCOMO_MCSX0 0x10 -#define LOCOMO_MCSX1 0x14 -#define LOCOMO_MCSX2 0x18 -#define LOCOMO_MCSX3 0x1c - -/* Touch panel controller */ -#define LOCOMO_ASD 0x20 /* AD start delay */ -#define LOCOMO_HSD 0x28 /* HSYS delay */ -#define LOCOMO_HSC 0x2c /* HSYS period */ -#define LOCOMO_TADC 0x30 /* tablet ADC clock */ - - -/* Long time timer */ -#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */ -#define LOCOMO_LTINT 0xdc /* LTC interrupt */ - -/* DAC control signal for LCD (COMADJ ) */ -#define LOCOMO_DAC 0xe0 -/* DAC control */ -#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */ -#define LOCOMO_DAC_TEST 0x04 /* Test bit */ -#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */ -#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */ - -/* SPI interface */ -#define LOCOMO_SPI 0x60 -#define LOCOMO_SPIMD 0x00 /* SPI mode setting */ -#define LOCOMO_SPICT 0x04 /* SPI mode control */ -#define LOCOMO_SPIST 0x08 /* SPI status */ -#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */ -#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */ -#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */ -#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */ -#define LOCOMO_SPITD 0x20 /* SPI transfer data write */ -#define LOCOMO_SPIRD 0x24 /* SPI receive data read */ -#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */ -#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */ -#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ -#define LOCOMO_SPI_OVRN (1 << 2) /* Over Run bit */ -#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ -#define LOCOMO_SPI_RFR (1) /* read buffer bit */ - -/* GPIO */ -#define LOCOMO_GPD 0x90 /* GPIO direction */ -#define LOCOMO_GPE 0x94 /* GPIO input enable */ -#define LOCOMO_GPL 0x98 /* GPIO level */ -#define LOCOMO_GPO 0x9c /* GPIO out data setteing */ -#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */ -#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */ -#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */ -#define LOCOMO_GWE 0xac /* GPIO status write enable */ -#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */ -#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */ -#define LOCOMO_GPIO(Nb) (0x01 << (Nb)) -#define LOCOMO_GPIO_RTS LOCOMO_GPIO(0) -#define LOCOMO_GPIO_CTS LOCOMO_GPIO(1) -#define LOCOMO_GPIO_DSR LOCOMO_GPIO(2) -#define LOCOMO_GPIO_DTR LOCOMO_GPIO(3) -#define LOCOMO_GPIO_LCD_VSHA_ON LOCOMO_GPIO(4) -#define LOCOMO_GPIO_LCD_VSHD_ON LOCOMO_GPIO(5) -#define LOCOMO_GPIO_LCD_VEE_ON LOCOMO_GPIO(6) -#define LOCOMO_GPIO_LCD_MOD LOCOMO_GPIO(7) -#define LOCOMO_GPIO_DAC_ON LOCOMO_GPIO(8) -#define LOCOMO_GPIO_FL_VR LOCOMO_GPIO(9) -#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10) -#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11) -#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12) - -/* Start the definitions of the devices. Each device has an initial - * base address and a series of offsets from that base address. */ - -/* Keyboard controller */ -#define LOCOMO_KEYBOARD 0x40 -#define LOCOMO_KIB 0x00 /* KIB level */ -#define LOCOMO_KSC 0x04 /* KSTRB control */ -#define LOCOMO_KCMD 0x08 /* KSTRB command */ -#define LOCOMO_KIC 0x0c /* Key interrupt */ - -/* Front light adjustment controller */ -#define LOCOMO_FRONTLIGHT 0xc8 -#define LOCOMO_ALS 0x00 /* Adjust light cycle */ -#define LOCOMO_ALD 0x04 /* Adjust light duty */ - -#define LOCOMO_ALC_EN 0x8000 - -/* Backlight controller: TFT signal */ -#define LOCOMO_BACKLIGHT 0x38 -#define LOCOMO_TC 0x00 /* TFT control signal */ -#define LOCOMO_CPSD 0x04 /* CPS delay */ - -/* Audio controller */ -#define LOCOMO_AUDIO 0x54 -#define LOCOMO_ACC 0x00 /* Audio clock */ -#define LOCOMO_PAIF 0x7C /* PCM audio interface */ -/* Audio clock */ -#define LOCOMO_ACC_XON 0x80 -#define LOCOMO_ACC_XEN 0x40 -#define LOCOMO_ACC_XSEL0 0x00 -#define LOCOMO_ACC_XSEL1 0x20 -#define LOCOMO_ACC_MCLKEN 0x10 -#define LOCOMO_ACC_64FSEN 0x08 -#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */ -#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */ -#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */ -#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */ -#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */ -#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */ -/* PCM audio interface */ -#define LOCOMO_PAIF_SCINV 0x20 -#define LOCOMO_PAIF_SCEN 0x10 -#define LOCOMO_PAIF_LRCRST 0x08 -#define LOCOMO_PAIF_LRCEVE 0x04 -#define LOCOMO_PAIF_LRCINV 0x02 -#define LOCOMO_PAIF_LRCEN 0x01 - -/* LED controller */ -#define LOCOMO_LED 0xe8 -#define LOCOMO_LPT0 0x00 -#define LOCOMO_LPT1 0x04 -/* LED control */ -#define LOCOMO_LPT_TOFH 0x80 -#define LOCOMO_LPT_TOFL 0x08 -#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4) -#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7)) - -extern struct bus_type locomo_bus_type; - -#define LOCOMO_DEVID_KEYBOARD 0 -#define LOCOMO_DEVID_FRONTLIGHT 1 -#define LOCOMO_DEVID_BACKLIGHT 2 -#define LOCOMO_DEVID_AUDIO 3 -#define LOCOMO_DEVID_LED 4 -#define LOCOMO_DEVID_UART 5 -#define LOCOMO_DEVID_SPI 6 - -struct locomo_dev { - struct device dev; - unsigned int devid; - unsigned int irq[1]; - - void *mapbase; - unsigned long length; - - u64 dma_mask; -}; - -#define LOCOMO_DEV(_d) container_of((_d), struct locomo_dev, dev) - -#define locomo_get_drvdata(d) dev_get_drvdata(&(d)->dev) -#define locomo_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) - -struct locomo_driver { - struct device_driver drv; - unsigned int devid; - int (*probe)(struct locomo_dev *); - int (*remove)(struct locomo_dev *); - int (*suspend)(struct locomo_dev *, pm_message_t); - int (*resume)(struct locomo_dev *); -}; - -#define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv) - -#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name) - -void locomo_lcd_power(struct locomo_dev *, int, unsigned int); - -int locomo_driver_register(struct locomo_driver *); -void locomo_driver_unregister(struct locomo_driver *); - -/* GPIO control functions */ -void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir); -int locomo_gpio_read_level(struct device *dev, unsigned int bits); -int locomo_gpio_read_output(struct device *dev, unsigned int bits); -void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set); - - -/* M62332 control function */ -void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel); - -/* Frontlight control */ -void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf); - -#endif diff --git a/include/asm-arm/hardware/memc.h b/include/asm-arm/hardware/memc.h deleted file mode 100644 index 8aef5aa0e01..00000000000 --- a/include/asm-arm/hardware/memc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/hardware/memc.h - * - * Copyright (C) Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VDMA_ALIGNMENT PAGE_SIZE -#define VDMA_XFERSIZE 16 -#define VDMA_INIT 0 -#define VDMA_START 1 -#define VDMA_END 2 - -#ifndef __ASSEMBLY__ -extern void memc_write(unsigned int reg, unsigned long val); - -#define video_set_dma(start,end,offset) \ -do { \ - memc_write (VDMA_START, (start >> 2)); \ - memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2); \ - memc_write (VDMA_INIT, (offset >> 2)); \ -} while (0) - -#endif diff --git a/include/asm-arm/hardware/pci_v3.h b/include/asm-arm/hardware/pci_v3.h deleted file mode 100644 index 4d497bdb9a9..00000000000 --- a/include/asm-arm/hardware/pci_v3.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/include/asm-arm/hardware/pci_v3.h - * - * Internal header file PCI V3 chip - * - * Copyright (C) ARM Limited - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef ASM_ARM_HARDWARE_PCI_V3_H -#define ASM_ARM_HARDWARE_PCI_V3_H - -/* ------------------------------------------------------------------------------- - * V3 Local Bus to PCI Bridge definitions - * ------------------------------------------------------------------------------- - * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04 - * All V3 register names are prefaced by V3_ to avoid clashing with any other - * PCI definitions. Their names match the user's manual. - * - * I'm assuming that I20 is disabled. - * - */ -#define V3_PCI_VENDOR 0x00000000 -#define V3_PCI_DEVICE 0x00000002 -#define V3_PCI_CMD 0x00000004 -#define V3_PCI_STAT 0x00000006 -#define V3_PCI_CC_REV 0x00000008 -#define V3_PCI_HDR_CFG 0x0000000C -#define V3_PCI_IO_BASE 0x00000010 -#define V3_PCI_BASE0 0x00000014 -#define V3_PCI_BASE1 0x00000018 -#define V3_PCI_SUB_VENDOR 0x0000002C -#define V3_PCI_SUB_ID 0x0000002E -#define V3_PCI_ROM 0x00000030 -#define V3_PCI_BPARAM 0x0000003C -#define V3_PCI_MAP0 0x00000040 -#define V3_PCI_MAP1 0x00000044 -#define V3_PCI_INT_STAT 0x00000048 -#define V3_PCI_INT_CFG 0x0000004C -#define V3_LB_BASE0 0x00000054 -#define V3_LB_BASE1 0x00000058 -#define V3_LB_MAP0 0x0000005E -#define V3_LB_MAP1 0x00000062 -#define V3_LB_BASE2 0x00000064 -#define V3_LB_MAP2 0x00000066 -#define V3_LB_SIZE 0x00000068 -#define V3_LB_IO_BASE 0x0000006E -#define V3_FIFO_CFG 0x00000070 -#define V3_FIFO_PRIORITY 0x00000072 -#define V3_FIFO_STAT 0x00000074 -#define V3_LB_ISTAT 0x00000076 -#define V3_LB_IMASK 0x00000077 -#define V3_SYSTEM 0x00000078 -#define V3_LB_CFG 0x0000007A -#define V3_PCI_CFG 0x0000007C -#define V3_DMA_PCI_ADR0 0x00000080 -#define V3_DMA_PCI_ADR1 0x00000090 -#define V3_DMA_LOCAL_ADR0 0x00000084 -#define V3_DMA_LOCAL_ADR1 0x00000094 -#define V3_DMA_LENGTH0 0x00000088 -#define V3_DMA_LENGTH1 0x00000098 -#define V3_DMA_CSR0 0x0000008B -#define V3_DMA_CSR1 0x0000009B -#define V3_DMA_CTLB_ADR0 0x0000008C -#define V3_DMA_CTLB_ADR1 0x0000009C -#define V3_DMA_DELAY 0x000000E0 -#define V3_MAIL_DATA 0x000000C0 -#define V3_PCI_MAIL_IEWR 0x000000D0 -#define V3_PCI_MAIL_IERD 0x000000D2 -#define V3_LB_MAIL_IEWR 0x000000D4 -#define V3_LB_MAIL_IERD 0x000000D6 -#define V3_MAIL_WR_STAT 0x000000D8 -#define V3_MAIL_RD_STAT 0x000000DA -#define V3_QBA_MAP 0x000000DC - -/* PCI COMMAND REGISTER bits - */ -#define V3_COMMAND_M_FBB_EN (1 << 9) -#define V3_COMMAND_M_SERR_EN (1 << 8) -#define V3_COMMAND_M_PAR_EN (1 << 6) -#define V3_COMMAND_M_MASTER_EN (1 << 2) -#define V3_COMMAND_M_MEM_EN (1 << 1) -#define V3_COMMAND_M_IO_EN (1 << 0) - -/* SYSTEM REGISTER bits - */ -#define V3_SYSTEM_M_RST_OUT (1 << 15) -#define V3_SYSTEM_M_LOCK (1 << 14) - -/* PCI_CFG bits - */ -#define V3_PCI_CFG_M_I2O_EN (1 << 15) -#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14) -#define V3_PCI_CFG_M_IO_DIS (1 << 13) -#define V3_PCI_CFG_M_EN3V (1 << 12) -#define V3_PCI_CFG_M_RETRY_EN (1 << 10) -#define V3_PCI_CFG_M_AD_LOW1 (1 << 9) -#define V3_PCI_CFG_M_AD_LOW0 (1 << 8) - -/* PCI_BASE register bits (PCI -> Local Bus) - */ -#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000 -#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00 -#define V3_PCI_BASE_M_PREFETCH (1 << 3) -#define V3_PCI_BASE_M_TYPE (3 << 1) -#define V3_PCI_BASE_M_IO (1 << 0) - -/* PCI MAP register bits (PCI -> Local bus) - */ -#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000 -#define V3_PCI_MAP_M_RD_POST_INH (1 << 15) -#define V3_PCI_MAP_M_ROM_SIZE (3 << 10) -#define V3_PCI_MAP_M_SWAP (3 << 8) -#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0 -#define V3_PCI_MAP_M_REG_EN (1 << 1) -#define V3_PCI_MAP_M_ENABLE (1 << 0) - -/* - * LB_BASE0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_BASE_ADR_BASE 0xfff00000 -#define V3_LB_BASE_SWAP (3 << 8) -#define V3_LB_BASE_ADR_SIZE (15 << 4) -#define V3_LB_BASE_PREFETCH (1 << 3) -#define V3_LB_BASE_ENABLE (1 << 0) - -#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4) -#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4) -#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4) -#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4) -#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4) -#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4) -#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4) -#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4) -#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4) -#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4) -#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4) -#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4) - -#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE) - -/* - * LB_MAP0,1 register bits (Local bus -> PCI) - */ -#define V3_LB_MAP_MAP_ADR 0xfff0 -#define V3_LB_MAP_TYPE (7 << 1) -#define V3_LB_MAP_AD_LOW_EN (1 << 0) - -#define V3_LB_MAP_TYPE_IACK (0 << 1) -#define V3_LB_MAP_TYPE_IO (1 << 1) -#define V3_LB_MAP_TYPE_MEM (3 << 1) -#define V3_LB_MAP_TYPE_CONFIG (5 << 1) -#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1) - -#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR) - -/* - * LB_BASE2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_BASE2_ADR_BASE 0xff00 -#define V3_LB_BASE2_SWAP (3 << 6) -#define V3_LB_BASE2_ENABLE (1 << 0) - -#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE) - -/* - * LB_MAP2 register bits (Local bus -> PCI IO) - */ -#define V3_LB_MAP2_MAP_ADR 0xff00 - -#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR) - -#endif diff --git a/include/asm-arm/hardware/sa1111.h b/include/asm-arm/hardware/sa1111.h deleted file mode 100644 index 319aea064c3..00000000000 --- a/include/asm-arm/hardware/sa1111.h +++ /dev/null @@ -1,602 +0,0 @@ -/* - * linux/include/asm-arm/hardware/SA-1111.h - * - * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu> - * - * This file contains definitions for the SA-1111 Companion Chip. - * (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.) - * - * Macro that calculates real address for registers in the SA-1111 - */ - -#ifndef _ASM_ARCH_SA1111 -#define _ASM_ARCH_SA1111 - -#include <asm/arch/bitfield.h> - -/* - * The SA1111 is always located at virtual 0xf4000000, and is always - * "native" endian. - */ - -#define SA1111_VBASE 0xf4000000 - -/* Don't use these! */ -#define SA1111_p2v( x ) ((x) - SA1111_BASE + SA1111_VBASE) -#define SA1111_v2p( x ) ((x) - SA1111_VBASE + SA1111_BASE) - -#ifndef __ASSEMBLY__ -#define _SA1111(x) ((x) + sa1111->resource.start) -#endif - -/* - * 26 bits of the SA-1110 address bus are available to the SA-1111. - * Use these when feeding target addresses to the DMA engines. - */ - -#define SA1111_ADDR_WIDTH (26) -#define SA1111_ADDR_MASK ((1<<SA1111_ADDR_WIDTH)-1) -#define SA1111_DMA_ADDR(x) ((x)&SA1111_ADDR_MASK) - -/* - * Don't ask the (SAC) DMA engines to move less than this amount. - */ - -#define SA1111_SAC_DMA_MIN_XFER (0x800) - -/* - * SA1111 register definitions. - */ -#define __CCREG(x) __REGP(SA1111_VBASE + (x)) - -#define sa1111_writel(val,addr) __raw_writel(val, addr) -#define sa1111_readl(addr) __raw_readl(addr) - -/* - * System Bus Interface (SBI) - * - * Registers - * SKCR Control Register - * SMCR Shared Memory Controller Register - * SKID ID Register - */ -#define SA1111_SKCR 0x0000 -#define SA1111_SMCR 0x0004 -#define SA1111_SKID 0x0008 - -#define SKCR_PLL_BYPASS (1<<0) -#define SKCR_RCLKEN (1<<1) -#define SKCR_SLEEP (1<<2) -#define SKCR_DOZE (1<<3) -#define SKCR_VCO_OFF (1<<4) -#define SKCR_SCANTSTEN (1<<5) -#define SKCR_CLKTSTEN (1<<6) -#define SKCR_RDYEN (1<<7) -#define SKCR_SELAC (1<<8) -#define SKCR_OPPC (1<<9) -#define SKCR_PLLTSTEN (1<<10) -#define SKCR_USBIOTSTEN (1<<11) -/* - * Don't believe the specs! Take them, throw them outside. Leave them - * there for a week. Spit on them. Walk on them. Stamp on them. - * Pour gasoline over them and finally burn them. Now think about coding. - * - The October 1999 errata (278260-007) says its bit 13, 1 to enable. - * - The Feb 2001 errata (278260-010) says that the previous errata - * (278260-009) is wrong, and its bit actually 12, fixed in spec - * 278242-003. - * - The SA1111 manual (278242) says bit 12, but 0 to enable. - * - Reality is bit 13, 1 to enable. - * -- rmk - */ -#define SKCR_OE_EN (1<<13) - -#define SMCR_DTIM (1<<0) -#define SMCR_MBGE (1<<1) -#define SMCR_DRAC_0 (1<<2) -#define SMCR_DRAC_1 (1<<3) -#define SMCR_DRAC_2 (1<<4) -#define SMCR_DRAC Fld(3, 2) -#define SMCR_CLAT (1<<5) - -#define SKID_SIREV_MASK (0x000000f0) -#define SKID_MTREV_MASK (0x0000000f) -#define SKID_ID_MASK (0xffffff00) -#define SKID_SA1111_ID (0x690cc200) - -/* - * System Controller - * - * Registers - * SKPCR Power Control Register - * SKCDR Clock Divider Register - * SKAUD Audio Clock Divider Register - * SKPMC PS/2 Mouse Clock Divider Register - * SKPTC PS/2 Track Pad Clock Divider Register - * SKPEN0 PWM0 Enable Register - * SKPWM0 PWM0 Clock Register - * SKPEN1 PWM1 Enable Register - * SKPWM1 PWM1 Clock Register - */ -#define SA1111_SKPCR 0x0200 -#define SA1111_SKCDR 0x0204 -#define SA1111_SKAUD 0x0208 -#define SA1111_SKPMC 0x020c -#define SA1111_SKPTC 0x0210 -#define SA1111_SKPEN0 0x0214 -#define SA1111_SKPWM0 0x0218 -#define SA1111_SKPEN1 0x021c -#define SA1111_SKPWM1 0x0220 - -#define SKPCR_UCLKEN (1<<0) -#define SKPCR_ACCLKEN (1<<1) -#define SKPCR_I2SCLKEN (1<<2) -#define SKPCR_L3CLKEN (1<<3) -#define SKPCR_SCLKEN (1<<4) -#define SKPCR_PMCLKEN (1<<5) -#define SKPCR_PTCLKEN (1<<6) -#define SKPCR_DCLKEN (1<<7) -#define SKPCR_PWMCLKEN (1<<8) - -/* - * USB Host controller - */ -#define SA1111_USB 0x0400 - -/* - * Offsets from SA1111_USB_BASE - */ -#define SA1111_USB_STATUS 0x0118 -#define SA1111_USB_RESET 0x011c -#define SA1111_USB_IRQTEST 0x0120 - -#define USB_RESET_FORCEIFRESET (1 << 0) -#define USB_RESET_FORCEHCRESET (1 << 1) -#define USB_RESET_CLKGENRESET (1 << 2) -#define USB_RESET_SIMSCALEDOWN (1 << 3) -#define USB_RESET_USBINTTEST (1 << 4) -#define USB_RESET_SLEEPSTBYEN (1 << 5) -#define USB_RESET_PWRSENSELOW (1 << 6) -#define USB_RESET_PWRCTRLLOW (1 << 7) - -#define USB_STATUS_IRQHCIRMTWKUP (1 << 7) -#define USB_STATUS_IRQHCIBUFFACC (1 << 8) -#define USB_STATUS_NIRQHCIM (1 << 9) -#define USB_STATUS_NHCIMFCLR (1 << 10) -#define USB_STATUS_USBPWRSENSE (1 << 11) - -/* - * Serial Audio Controller - * - * Registers - * SACR0 Serial Audio Common Control Register - * SACR1 Serial Audio Alternate Mode (I2C/MSB) Control Register - * SACR2 Serial Audio AC-link Control Register - * SASR0 Serial Audio I2S/MSB Interface & FIFO Status Register - * SASR1 Serial Audio AC-link Interface & FIFO Status Register - * SASCR Serial Audio Status Clear Register - * L3_CAR L3 Control Bus Address Register - * L3_CDR L3 Control Bus Data Register - * ACCAR AC-link Command Address Register - * ACCDR AC-link Command Data Register - * ACSAR AC-link Status Address Register - * ACSDR AC-link Status Data Register - * SADTCS Serial Audio DMA Transmit Control/Status Register - * SADTSA Serial Audio DMA Transmit Buffer Start Address A - * SADTCA Serial Audio DMA Transmit Buffer Count Register A - * SADTSB Serial Audio DMA Transmit Buffer Start Address B - * SADTCB Serial Audio DMA Transmit Buffer Count Register B - * SADRCS Serial Audio DMA Receive Control/Status Register - * SADRSA Serial Audio DMA Receive Buffer Start Address A - * SADRCA Serial Audio DMA Receive Buffer Count Register A - * SADRSB Serial Audio DMA Receive Buffer Start Address B - * SADRCB Serial Audio DMA Receive Buffer Count Register B - * SAITR Serial Audio Interrupt Test Register - * SADR Serial Audio Data Register (16 x 32-bit) - */ - -#define _SACR0 _SA1111( 0x0600 ) -#define _SACR1 _SA1111( 0x0604 ) -#define _SACR2 _SA1111( 0x0608 ) -#define _SASR0 _SA1111( 0x060c ) -#define _SASR1 _SA1111( 0x0610 ) -#define _SASCR _SA1111( 0x0618 ) -#define _L3_CAR _SA1111( 0x061c ) -#define _L3_CDR _SA1111( 0x0620 ) -#define _ACCAR _SA1111( 0x0624 ) -#define _ACCDR _SA1111( 0x0628 ) -#define _ACSAR _SA1111( 0x062c ) -#define _ACSDR _SA1111( 0x0630 ) -#define _SADTCS _SA1111( 0x0634 ) -#define _SADTSA _SA1111( 0x0638 ) -#define _SADTCA _SA1111( 0x063c ) -#define _SADTSB _SA1111( 0x0640 ) -#define _SADTCB _SA1111( 0x0644 ) -#define _SADRCS _SA1111( 0x0648 ) -#define _SADRSA _SA1111( 0x064c ) -#define _SADRCA _SA1111( 0x0650 ) -#define _SADRSB _SA1111( 0x0654 ) -#define _SADRCB _SA1111( 0x0658 ) -#define _SAITR _SA1111( 0x065c ) -#define _SADR _SA1111( 0x0680 ) - -#define SACR0 __CCREG(0x0600) -#define SACR1 __CCREG(0x0604) -#define SACR2 __CCREG(0x0608) -#define SASR0 __CCREG(0x060c) -#define SASR1 __CCREG(0x0610) -#define SASCR __CCREG(0x0618) -#define L3_CAR __CCREG(0x061c) -#define L3_CDR __CCREG(0x0620) -#define ACCAR __CCREG(0x0624) -#define ACCDR __CCREG(0x0628) -#define ACSAR __CCREG(0x062c) -#define ACSDR __CCREG(0x0630) -#define SADTCS __CCREG(0x0634) -#define SADTSA __CCREG(0x0638) -#define SADTCA __CCREG(0x063c) -#define SADTSB __CCREG(0x0640) -#define SADTCB __CCREG(0x0644) -#define SADRCS __CCREG(0x0648) -#define SADRSA __CCREG(0x064c) -#define SADRCA __CCREG(0x0650) -#define SADRSB __CCREG(0x0654) -#define SADRCB __CCREG(0x0658) -#define SAITR __CCREG(0x065c) -#define SADR __CCREG(0x0680) - -#define SACR0_ENB (1<<0) -#define SACR0_BCKD (1<<2) -#define SACR0_RST (1<<3) - -#define SACR1_AMSL (1<<0) -#define SACR1_L3EN (1<<1) -#define SACR1_L3MB (1<<2) -#define SACR1_DREC (1<<3) -#define SACR1_DRPL (1<<4) -#define SACR1_ENLBF (1<<5) - -#define SACR2_TS3V (1<<0) -#define SACR2_TS4V (1<<1) -#define SACR2_WKUP (1<<2) -#define SACR2_DREC (1<<3) -#define SACR2_DRPL (1<<4) -#define SACR2_ENLBF (1<<5) -#define SACR2_RESET (1<<6) - -#define SASR0_TNF (1<<0) -#define SASR0_RNE (1<<1) -#define SASR0_BSY (1<<2) -#define SASR0_TFS (1<<3) -#define SASR0_RFS (1<<4) -#define SASR0_TUR (1<<5) -#define SASR0_ROR (1<<6) -#define SASR0_L3WD (1<<16) -#define SASR0_L3RD (1<<17) - -#define SASR1_TNF (1<<0) -#define SASR1_RNE (1<<1) -#define SASR1_BSY (1<<2) -#define SASR1_TFS (1<<3) -#define SASR1_RFS (1<<4) -#define SASR1_TUR (1<<5) -#define SASR1_ROR (1<<6) -#define SASR1_CADT (1<<16) -#define SASR1_SADR (1<<17) -#define SASR1_RSTO (1<<18) -#define SASR1_CLPM (1<<19) -#define SASR1_CRDY (1<<20) -#define SASR1_RS3V (1<<21) -#define SASR1_RS4V (1<<22) - -#define SASCR_TUR (1<<5) -#define SASCR_ROR (1<<6) -#define SASCR_DTS (1<<16) -#define SASCR_RDD (1<<17) -#define SASCR_STO (1<<18) - -#define SADTCS_TDEN (1<<0) -#define SADTCS_TDIE (1<<1) -#define SADTCS_TDBDA (1<<3) -#define SADTCS_TDSTA (1<<4) -#define SADTCS_TDBDB (1<<5) -#define SADTCS_TDSTB (1<<6) -#define SADTCS_TBIU (1<<7) - -#define SADRCS_RDEN (1<<0) -#define SADRCS_RDIE (1<<1) -#define SADRCS_RDBDA (1<<3) -#define SADRCS_RDSTA (1<<4) -#define SADRCS_RDBDB (1<<5) -#define SADRCS_RDSTB (1<<6) -#define SADRCS_RBIU (1<<7) - -#define SAD_CS_DEN (1<<0) -#define SAD_CS_DIE (1<<1) /* Not functional on metal 1 */ -#define SAD_CS_DBDA (1<<3) /* Not functional on metal 1 */ -#define SAD_CS_DSTA (1<<4) -#define SAD_CS_DBDB (1<<5) /* Not functional on metal 1 */ -#define SAD_CS_DSTB (1<<6) -#define SAD_CS_BIU (1<<7) /* Not functional on metal 1 */ - -#define SAITR_TFS (1<<0) -#define SAITR_RFS (1<<1) -#define SAITR_TUR (1<<2) -#define SAITR_ROR (1<<3) -#define SAITR_CADT (1<<4) -#define SAITR_SADR (1<<5) -#define SAITR_RSTO (1<<6) -#define SAITR_TDBDA (1<<8) -#define SAITR_TDBDB (1<<9) -#define SAITR_RDBDA (1<<10) -#define SAITR_RDBDB (1<<11) - -/* - * General-Purpose I/O Interface - * - * Registers - * PA_DDR GPIO Block A Data Direction - * PA_DRR/PA_DWR GPIO Block A Data Value Register (read/write) - * PA_SDR GPIO Block A Sleep Direction - * PA_SSR GPIO Block A Sleep State - * PB_DDR GPIO Block B Data Direction - * PB_DRR/PB_DWR GPIO Block B Data Value Register (read/write) - * PB_SDR GPIO Block B Sleep Direction - * PB_SSR GPIO Block B Sleep State - * PC_DDR GPIO Block C Data Direction - * PC_DRR/PC_DWR GPIO Block C Data Value Register (read/write) - * PC_SDR GPIO Block C Sleep Direction - * PC_SSR GPIO Block C Sleep State - */ - -#define _PA_DDR _SA1111( 0x1000 ) -#define _PA_DRR _SA1111( 0x1004 ) -#define _PA_DWR _SA1111( 0x1004 ) -#define _PA_SDR _SA1111( 0x1008 ) -#define _PA_SSR _SA1111( 0x100c ) -#define _PB_DDR _SA1111( 0x1010 ) -#define _PB_DRR _SA1111( 0x1014 ) -#define _PB_DWR _SA1111( 0x1014 ) -#define _PB_SDR _SA1111( 0x1018 ) -#define _PB_SSR _SA1111( 0x101c ) -#define _PC_DDR _SA1111( 0x1020 ) -#define _PC_DRR _SA1111( 0x1024 ) -#define _PC_DWR _SA1111( 0x1024 ) -#define _PC_SDR _SA1111( 0x1028 ) -#define _PC_SSR _SA1111( 0x102c ) - -#define SA1111_GPIO 0x1000 - -#define SA1111_GPIO_PADDR (0x000) -#define SA1111_GPIO_PADRR (0x004) -#define SA1111_GPIO_PADWR (0x004) -#define SA1111_GPIO_PASDR (0x008) -#define SA1111_GPIO_PASSR (0x00c) -#define SA1111_GPIO_PBDDR (0x010) -#define SA1111_GPIO_PBDRR (0x014) -#define SA1111_GPIO_PBDWR (0x014) -#define SA1111_GPIO_PBSDR (0x018) -#define SA1111_GPIO_PBSSR (0x01c) -#define SA1111_GPIO_PCDDR (0x020) -#define SA1111_GPIO_PCDRR (0x024) -#define SA1111_GPIO_PCDWR (0x024) -#define SA1111_GPIO_PCSDR (0x028) -#define SA1111_GPIO_PCSSR (0x02c) - -#define GPIO_A0 (1 << 0) -#define GPIO_A1 (1 << 1) -#define GPIO_A2 (1 << 2) -#define GPIO_A3 (1 << 3) - -#define GPIO_B0 (1 << 8) -#define GPIO_B1 (1 << 9) -#define GPIO_B2 (1 << 10) -#define GPIO_B3 (1 << 11) -#define GPIO_B4 (1 << 12) -#define GPIO_B5 (1 << 13) -#define GPIO_B6 (1 << 14) -#define GPIO_B7 (1 << 15) - -#define GPIO_C0 (1 << 16) -#define GPIO_C1 (1 << 17) -#define GPIO_C2 (1 << 18) -#define GPIO_C3 (1 << 19) -#define GPIO_C4 (1 << 20) -#define GPIO_C5 (1 << 21) -#define GPIO_C6 (1 << 22) -#define GPIO_C7 (1 << 23) - -/* - * Interrupt Controller - * - * Registers - * INTTEST0 Test register 0 - * INTTEST1 Test register 1 - * INTEN0 Interrupt Enable register 0 - * INTEN1 Interrupt Enable register 1 - * INTPOL0 Interrupt Polarity selection 0 - * INTPOL1 Interrupt Polarity selection 1 - * INTTSTSEL Interrupt source selection - * INTSTATCLR0 Interrupt Status/Clear 0 - * INTSTATCLR1 Interrupt Status/Clear 1 - * INTSET0 Interrupt source set 0 - * INTSET1 Interrupt source set 1 - * WAKE_EN0 Wake-up source enable 0 - * WAKE_EN1 Wake-up source enable 1 - * WAKE_POL0 Wake-up polarity selection 0 - * WAKE_POL1 Wake-up polarity selection 1 - */ -#define SA1111_INTC 0x1600 - -/* - * These are offsets from the above base. - */ -#define SA1111_INTTEST0 0x0000 -#define SA1111_INTTEST1 0x0004 -#define SA1111_INTEN0 0x0008 -#define SA1111_INTEN1 0x000c -#define SA1111_INTPOL0 0x0010 -#define SA1111_INTPOL1 0x0014 -#define SA1111_INTTSTSEL 0x0018 -#define SA1111_INTSTATCLR0 0x001c -#define SA1111_INTSTATCLR1 0x0020 -#define SA1111_INTSET0 0x0024 -#define SA1111_INTSET1 0x0028 -#define SA1111_WAKEEN0 0x002c -#define SA1111_WAKEEN1 0x0030 -#define SA1111_WAKEPOL0 0x0034 -#define SA1111_WAKEPOL1 0x0038 - -/* - * PS/2 Trackpad and Mouse Interfaces - * - * Registers - * PS2CR Control Register - * PS2STAT Status Register - * PS2DATA Transmit/Receive Data register - * PS2CLKDIV Clock Division Register - * PS2PRECNT Clock Precount Register - * PS2TEST1 Test register 1 - * PS2TEST2 Test register 2 - * PS2TEST3 Test register 3 - * PS2TEST4 Test register 4 - */ - -#define SA1111_KBD 0x0a00 -#define SA1111_MSE 0x0c00 - -/* - * These are offsets from the above bases. - */ -#define SA1111_PS2CR 0x0000 -#define SA1111_PS2STAT 0x0004 -#define SA1111_PS2DATA 0x0008 -#define SA1111_PS2CLKDIV 0x000c -#define SA1111_PS2PRECNT 0x0010 - -#define PS2CR_ENA 0x08 -#define PS2CR_FKD 0x02 -#define PS2CR_FKC 0x01 - -#define PS2STAT_STP 0x0100 -#define PS2STAT_TXE 0x0080 -#define PS2STAT_TXB 0x0040 -#define PS2STAT_RXF 0x0020 -#define PS2STAT_RXB 0x0010 -#define PS2STAT_ENA 0x0008 -#define PS2STAT_RXP 0x0004 -#define PS2STAT_KBD 0x0002 -#define PS2STAT_KBC 0x0001 - -/* - * PCMCIA Interface - * - * Registers - * PCSR Status Register - * PCCR Control Register - * PCSSR Sleep State Register - */ - -#define SA1111_PCMCIA 0x1600 - -/* - * These are offsets from the above base. - */ -#define SA1111_PCCR 0x0000 -#define SA1111_PCSSR 0x0004 -#define SA1111_PCSR 0x0008 - -#define PCSR_S0_READY (1<<0) -#define PCSR_S1_READY (1<<1) -#define PCSR_S0_DETECT (1<<2) -#define PCSR_S1_DETECT (1<<3) -#define PCSR_S0_VS1 (1<<4) -#define PCSR_S0_VS2 (1<<5) -#define PCSR_S1_VS1 (1<<6) -#define PCSR_S1_VS2 (1<<7) -#define PCSR_S0_WP (1<<8) -#define PCSR_S1_WP (1<<9) -#define PCSR_S0_BVD1 (1<<10) -#define PCSR_S0_BVD2 (1<<11) -#define PCSR_S1_BVD1 (1<<12) -#define PCSR_S1_BVD2 (1<<13) - -#define PCCR_S0_RST (1<<0) -#define PCCR_S1_RST (1<<1) -#define PCCR_S0_FLT (1<<2) -#define PCCR_S1_FLT (1<<3) -#define PCCR_S0_PWAITEN (1<<4) -#define PCCR_S1_PWAITEN (1<<5) -#define PCCR_S0_PSE (1<<6) -#define PCCR_S1_PSE (1<<7) - -#define PCSSR_S0_SLEEP (1<<0) -#define PCSSR_S1_SLEEP (1<<1) - - - - -extern struct bus_type sa1111_bus_type; - -#define SA1111_DEVID_SBI 0 -#define SA1111_DEVID_SK 1 -#define SA1111_DEVID_USB 2 -#define SA1111_DEVID_SAC 3 -#define SA1111_DEVID_SSP 4 -#define SA1111_DEVID_PS2 5 -#define SA1111_DEVID_GPIO 6 -#define SA1111_DEVID_INT 7 -#define SA1111_DEVID_PCMCIA 8 - -struct sa1111_dev { - struct device dev; - unsigned int devid; - struct resource res; - void __iomem *mapbase; - unsigned int skpcr_mask; - unsigned int irq[6]; - u64 dma_mask; -}; - -#define SA1111_DEV(_d) container_of((_d), struct sa1111_dev, dev) - -#define sa1111_get_drvdata(d) dev_get_drvdata(&(d)->dev) -#define sa1111_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) - -struct sa1111_driver { - struct device_driver drv; - unsigned int devid; - int (*probe)(struct sa1111_dev *); - int (*remove)(struct sa1111_dev *); - int (*suspend)(struct sa1111_dev *, pm_message_t); - int (*resume)(struct sa1111_dev *); -}; - -#define SA1111_DRV(_d) container_of((_d), struct sa1111_driver, drv) - -#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name) - -/* - * These frob the SKPCR register. - */ -void sa1111_enable_device(struct sa1111_dev *); -void sa1111_disable_device(struct sa1111_dev *); - -unsigned int sa1111_pll_clock(struct sa1111_dev *); - -#define SA1111_AUDIO_ACLINK 0 -#define SA1111_AUDIO_I2S 1 - -void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode); -int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate); -int sa1111_get_audio_rate(struct sa1111_dev *sadev); - -int sa1111_check_dma_bug(dma_addr_t addr); - -int sa1111_driver_register(struct sa1111_driver *); -void sa1111_driver_unregister(struct sa1111_driver *); - -void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir); -void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); -void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v); - -#endif /* _ASM_ARCH_SA1111 */ diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h deleted file mode 100644 index d37bf744326..00000000000 --- a/include/asm-arm/hardware/scoop.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Definitions for the SCOOP interface found on various Sharp PDAs - * - * Copyright (c) 2004 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#define SCOOP_MCR 0x00 -#define SCOOP_CDR 0x04 -#define SCOOP_CSR 0x08 -#define SCOOP_CPR 0x0C -#define SCOOP_CCR 0x10 -#define SCOOP_IRR 0x14 -#define SCOOP_IRM 0x14 -#define SCOOP_IMR 0x18 -#define SCOOP_ISR 0x1C -#define SCOOP_GPCR 0x20 -#define SCOOP_GPWR 0x24 -#define SCOOP_GPRR 0x28 - -#define SCOOP_GPCR_PA22 ( 1 << 12 ) -#define SCOOP_GPCR_PA21 ( 1 << 11 ) -#define SCOOP_GPCR_PA20 ( 1 << 10 ) -#define SCOOP_GPCR_PA19 ( 1 << 9 ) -#define SCOOP_GPCR_PA18 ( 1 << 8 ) -#define SCOOP_GPCR_PA17 ( 1 << 7 ) -#define SCOOP_GPCR_PA16 ( 1 << 6 ) -#define SCOOP_GPCR_PA15 ( 1 << 5 ) -#define SCOOP_GPCR_PA14 ( 1 << 4 ) -#define SCOOP_GPCR_PA13 ( 1 << 3 ) -#define SCOOP_GPCR_PA12 ( 1 << 2 ) -#define SCOOP_GPCR_PA11 ( 1 << 1 ) - -struct scoop_config { - unsigned short io_out; - unsigned short io_dir; - unsigned short suspend_clr; - unsigned short suspend_set; -}; - -/* Structure for linking scoop devices to PCMCIA sockets */ -struct scoop_pcmcia_dev { - struct device *dev; /* Pointer to this socket's scoop device */ - int irq; /* irq for socket */ - int cd_irq; - const char *cd_irq_str; - unsigned char keep_vs; - unsigned char keep_rd; -}; - -struct scoop_pcmcia_config { - struct scoop_pcmcia_dev *devs; - int num_devs; - void (*pcmcia_init)(void); - void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr); -}; - -extern struct scoop_pcmcia_config *platform_scoop_config; - -void reset_scoop(struct device *dev); -unsigned short set_scoop_gpio(struct device *dev, unsigned short bit); -unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit); -unsigned short read_scoop_reg(struct device *dev, unsigned short reg); -void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data); diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/include/asm-arm/hardware/sharpsl_pm.h deleted file mode 100644 index a836e76a14f..00000000000 --- a/include/asm-arm/hardware/sharpsl_pm.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * SharpSL Battery/PM Driver - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/interrupt.h> - -struct sharpsl_charger_machinfo { - void (*init)(void); - void (*exit)(void); - int gpio_acin; - int gpio_batfull; - int batfull_irq; - int gpio_batlock; - int gpio_fatal; - void (*discharge)(int); - void (*discharge1)(int); - void (*charge)(int); - void (*measure_temp)(int); - void (*presuspend)(void); - void (*postsuspend)(void); - void (*earlyresume)(void); - unsigned long (*read_devdata)(int); -#define SHARPSL_BATT_VOLT 1 -#define SHARPSL_BATT_TEMP 2 -#define SHARPSL_ACIN_VOLT 3 -#define SHARPSL_STATUS_ACIN 4 -#define SHARPSL_STATUS_LOCK 5 -#define SHARPSL_STATUS_CHRGFULL 6 -#define SHARPSL_STATUS_FATAL 7 - unsigned long (*charger_wakeup)(void); - int (*should_wakeup)(unsigned int resume_on_alarm); - void (*backlight_limit)(int); - int (*backlight_get_status) (void); - int charge_on_volt; - int charge_on_temp; - int charge_acin_high; - int charge_acin_low; - int fatal_acin_volt; - int fatal_noacin_volt; - int bat_levels; - struct battery_thresh *bat_levels_noac; - struct battery_thresh *bat_levels_acin; - struct battery_thresh *bat_levels_noac_bl; - struct battery_thresh *bat_levels_acin_bl; - int status_high_acin; - int status_low_acin; - int status_high_noac; - int status_low_noac; -}; - -struct battery_thresh { - int voltage; - int percentage; -}; - -struct battery_stat { - int ac_status; /* APM AC Present/Not Present */ - int mainbat_status; /* APM Main Battery Status */ - int mainbat_percent; /* Main Battery Percentage Charge */ - int mainbat_voltage; /* Main Battery Voltage */ -}; - -struct sharpsl_pm_status { - struct device *dev; - struct timer_list ac_timer; - struct timer_list chrg_full_timer; - - int charge_mode; -#define CHRG_ERROR (-1) -#define CHRG_OFF (0) -#define CHRG_ON (1) -#define CHRG_DONE (2) - - unsigned int flags; -#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */ -#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */ -#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */ -#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */ -#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */ - - int full_count; - unsigned long charge_start_time; - struct sharpsl_charger_machinfo *machinfo; - struct battery_stat battstat; -}; - -extern struct sharpsl_pm_status sharpsl_pm; - - -#define SHARPSL_LED_ERROR 2 -#define SHARPSL_LED_ON 1 -#define SHARPSL_LED_OFF 0 - -void sharpsl_battery_kick(void); -void sharpsl_pm_led(int val); -irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp); -irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp); -irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp); - diff --git a/include/asm-arm/hardware/ssp.h b/include/asm-arm/hardware/ssp.h deleted file mode 100644 index 3b42e181997..00000000000 --- a/include/asm-arm/hardware/ssp.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * ssp.h - * - * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef SSP_H -#define SSP_H - -struct ssp_state { - unsigned int cr0; - unsigned int cr1; -}; - -int ssp_write_word(u16 data); -int ssp_read_word(u16 *data); -int ssp_flush(void); -void ssp_enable(void); -void ssp_disable(void); -void ssp_save_state(struct ssp_state *ssp); -void ssp_restore_state(struct ssp_state *ssp); -int ssp_init(void); -void ssp_exit(void); - -#endif diff --git a/include/asm-arm/hardware/uengine.h b/include/asm-arm/hardware/uengine.h deleted file mode 100644 index b442d65c659..00000000000 --- a/include/asm-arm/hardware/uengine.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Generic library functions for the microengines found on the Intel - * IXP2000 series of network processors. - * - * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2.1 of the - * License, or (at your option) any later version. - */ - -#ifndef __IXP2000_UENGINE_H -#define __IXP2000_UENGINE_H - -extern u32 ixp2000_uengine_mask; - -struct ixp2000_uengine_code -{ - u32 cpu_model_bitmask; - u8 cpu_min_revision; - u8 cpu_max_revision; - - u32 uengine_parameters; - - struct ixp2000_reg_value { - int reg; - u32 value; - } *initial_reg_values; - - int num_insns; - u8 *insns; -}; - -u32 ixp2000_uengine_csr_read(int uengine, int offset); -void ixp2000_uengine_csr_write(int uengine, int offset, u32 value); -void ixp2000_uengine_reset(u32 uengine_mask); -void ixp2000_uengine_set_mode(int uengine, u32 mode); -void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns); -void ixp2000_uengine_init_context(int uengine, int context, int pc); -void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask); -void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask); -int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c); - -#define IXP2000_UENGINE_8_CONTEXTS 0x00000000 -#define IXP2000_UENGINE_4_CONTEXTS 0x80000000 -#define IXP2000_UENGINE_PRN_UPDATE_EVERY 0x40000000 -#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS 0x00000000 -#define IXP2000_UENGINE_NN_FROM_SELF 0x00100000 -#define IXP2000_UENGINE_NN_FROM_PREVIOUS 0x00000000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3 0x000c0000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2 0x00080000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1 0x00040000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0 0x00000000 -#define IXP2000_UENGINE_LM_ADDR1_GLOBAL 0x00020000 -#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT 0x00000000 -#define IXP2000_UENGINE_LM_ADDR0_GLOBAL 0x00010000 -#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT 0x00000000 - - -#endif diff --git a/include/asm-arm/hardware/vic.h b/include/asm-arm/hardware/vic.h deleted file mode 100644 index ed9ca3736a0..00000000000 --- a/include/asm-arm/hardware/vic.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/include/asm-arm/hardware/vic.h - * - * Copyright (c) ARM Limited 2003. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_HARDWARE_VIC_H -#define __ASM_ARM_HARDWARE_VIC_H - -#define VIC_IRQ_STATUS 0x00 -#define VIC_FIQ_STATUS 0x04 -#define VIC_RAW_STATUS 0x08 -#define VIC_INT_SELECT 0x0c /* 1 = FIQ, 0 = IRQ */ -#define VIC_INT_ENABLE 0x10 /* 1 = enable, 0 = disable */ -#define VIC_INT_ENABLE_CLEAR 0x14 -#define VIC_INT_SOFT 0x18 -#define VIC_INT_SOFT_CLEAR 0x1c -#define VIC_PROTECT 0x20 -#define VIC_VECT_ADDR 0x30 -#define VIC_DEF_VECT_ADDR 0x34 - -#define VIC_VECT_ADDR0 0x100 /* 0 to 15 */ -#define VIC_VECT_CNTL0 0x200 /* 0 to 15 */ -#define VIC_ITCR 0x300 /* VIC test control register */ - -#define VIC_VECT_CNTL_ENABLE (1 << 5) - -#ifndef __ASSEMBLY__ -void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources); -#endif - -#endif |