diff options
Diffstat (limited to 'include/asm-arm/arch-s3c2410')
20 files changed, 70 insertions, 1404 deletions
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S index 93064860e0e..9c8cd9abb82 100644 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ b/include/asm-arm/arch-s3c2410/debug-macro.S @@ -13,32 +13,23 @@ */ #include <asm/arch/map.h> -#include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> +#include <asm/plat-s3c/regs-serial.h> #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) - .macro addruart, rx + .macro addruart, rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 ldreq \rx, = S3C24XX_PA_UART ldrne \rx, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C2410_UART != 0 - add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART) +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) #endif - .endm + .endm - .macro senduart,rd,rx - strb \rd, [\rx, # S3C2410_UTXH ] - .endm - - .macro busyuart, rd, rx - ldr \rd, [ \rx, # S3C2410_UFCON ] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: + .macro fifo_full_s3c24xx rd, rx @ check for arm920 vs arm926. currently assume all arm926 @ devices have an 64 byte FIFO identical to the s3c2440 mrc p15, 0, \rd, c0, c0 @@ -57,25 +48,22 @@ ldr \rd, [ \rx, # S3C2410_UFSTAT ] moveq \rd, \rd, lsr #SHIFT_2440TXF tst \rd, #S3C2410_UFSTAT_TXFULL - bne 1003b - b 1002f - -1001: - @ busy waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b + .endm -1002: @ exit busyuart - .endm + .macro fifo_full_s3c2410 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + tst \rd, #S3C2410_UFSTAT_TXFULL + .endm - .macro waituart,rd,rx +/* fifo level reading */ - ldr \rd, [ \rx, # S3C2410_UFCON ] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: + .macro fifo_level_s3c24xx rd, rx + @ check for arm920 vs arm926. currently assume all arm926 + @ devices have an 64 byte FIFO identical to the s3c2440 + mrc p15, 0, \rd, c0, c0 + and \rd, \rd, #0xff0 + teq \rd, #0x260 + beq 10000f mrc p15, 0, \rd, c1, c0 tst \rd, #1 addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) @@ -85,18 +73,32 @@ and \rd, \rd, #0x00ff0000 teq \rd, #0x00440000 @ is it 2440? +10000: ldr \rd, [ \rx, # S3C2410_UFSTAT ] andne \rd, \rd, #S3C2410_UFSTAT_TXMASK andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK - teq \rd, #0 - bne 1003b - b 1002f + .endm + + .macro fifo_level_s3c2410 rd, rx + ldr \rd, [ \rx, # S3C2410_UFSTAT ] + and \rd, \rd, #S3C2410_UFSTAT_TXMASK + .endm + +/* Select the correct implementation depending on the configuration. The + * S3C2440 will get selected by default, as these are the most widely + * used variants of these +*/ + +#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) +#define fifo_full fifo_full_s3c2410 +#define fifo_level fifo_level_s3c2410 +#warning 2410only +#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) +#define fifo_full fifo_full_s3c24xx +#define fifo_level fifo_level_s3c24xx +#warning generic +#endif -1001: - @ idle waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b +/* include the reset of the code which will do the work */ -1002: @ exit busyuart - .endm +#include <asm/plat-s3c/debug-macro.S> diff --git a/include/asm-arm/arch-s3c2410/iic.h b/include/asm-arm/arch-s3c2410/iic.h deleted file mode 100644 index 71211c8b538..00000000000 --- a/include/asm-arm/arch-s3c2410/iic.h +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/iic.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - I2C Controller platfrom_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IIC_H -#define __ASM_ARCH_IIC_H __FILE__ - -#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ - -/* Notes: - * 1) All frequencies are expressed in Hz - * 2) A value of zero is `do not care` -*/ - -struct s3c2410_platform_i2c { - unsigned int flags; - unsigned int slave_addr; /* slave address for controller */ - unsigned long bus_freq; /* standard bus frequency */ - unsigned long max_freq; /* max frequency for the bus */ - unsigned long min_freq; /* min frequency for the bus */ - unsigned int sda_delay; /* pclks (s3c2440 only) */ -}; - -#endif /* __ASM_ARCH_IIC_H */ diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index 19e77f03804..b33ed3b05ef 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -13,58 +13,36 @@ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H -/* we have a bit of a tight squeeze to fit all our registers from - * 0xF00000000 upwards, since we use all of the nGCS space in some - * capacity, and also need to fit the S3C2410 registers in as well... - * - * we try to ensure stuff like the IRQ registers are available for - * an single MOVS instruction (ie, only 8 bits of set data) - * - * Note, we are trying to remove some of these from the implementation - * as they are only useful to certain drivers... - */ - -#ifndef __ASSEMBLY__ -#define S3C2410_ADDR(x) ((void __iomem __force *)0xF0000000 + (x)) -#else -#define S3C2410_ADDR(x) (0xF0000000 + (x)) -#endif +#include <asm/plat-s3c/map.h> -#define S3C2400_ADDR(x) S3C2410_ADDR(x) +#define S3C2410_ADDR(x) S3C_ADDR(x) /* interrupt controller is the first thing we put in, to make * the assembly code for the irq detection easier */ -#define S3C24XX_VA_IRQ S3C2410_ADDR(0x00000000) -#define S3C2400_PA_IRQ (0x14400000) +#define S3C24XX_VA_IRQ S3C_VA_IRQ #define S3C2410_PA_IRQ (0x4A000000) #define S3C24XX_SZ_IRQ SZ_1M /* memory controller registers */ -#define S3C24XX_VA_MEMCTRL S3C2410_ADDR(0x00100000) -#define S3C2400_PA_MEMCTRL (0x14000000) +#define S3C24XX_VA_MEMCTRL S3C_VA_MEM #define S3C2410_PA_MEMCTRL (0x48000000) #define S3C24XX_SZ_MEMCTRL SZ_1M /* USB host controller */ -#define S3C2400_PA_USBHOST (0x14200000) #define S3C2410_PA_USBHOST (0x49000000) #define S3C24XX_SZ_USBHOST SZ_1M /* DMA controller */ -#define S3C2400_PA_DMA (0x14600000) #define S3C2410_PA_DMA (0x4B000000) #define S3C24XX_SZ_DMA SZ_1M /* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00200000) -#define S3C2400_PA_CLKPWR (0x14800000) +#define S3C24XX_VA_CLKPWR S3C_VA_SYS #define S3C2410_PA_CLKPWR (0x4C000000) #define S3C24XX_SZ_CLKPWR SZ_1M /* LCD controller */ -#define S3C24XX_VA_LCD S3C2410_ADDR(0x00300000) -#define S3C2400_PA_LCD (0x14A00000) #define S3C2410_PA_LCD (0x4D000000) #define S3C24XX_SZ_LCD SZ_1M @@ -72,41 +50,30 @@ #define S3C2410_PA_NAND (0x4E000000) #define S3C24XX_SZ_NAND SZ_1M -/* MMC controller - available on the S3C2400 */ -#define S3C2400_PA_MMC (0x15A00000) -#define S3C2400_SZ_MMC SZ_1M - /* UARTs */ -#define S3C24XX_VA_UART S3C2410_ADDR(0x00400000) -#define S3C2400_PA_UART (0x15000000) +#define S3C24XX_VA_UART S3C_VA_UART #define S3C2410_PA_UART (0x50000000) #define S3C24XX_SZ_UART SZ_1M /* Timers */ -#define S3C24XX_VA_TIMER S3C2410_ADDR(0x00500000) -#define S3C2400_PA_TIMER (0x15100000) +#define S3C24XX_VA_TIMER S3C_VA_TIMER #define S3C2410_PA_TIMER (0x51000000) #define S3C24XX_SZ_TIMER SZ_1M /* USB Device port */ -#define S3C24XX_VA_USBDEV S3C2410_ADDR(0x00600000) -#define S3C2400_PA_USBDEV (0x15200140) #define S3C2410_PA_USBDEV (0x52000000) #define S3C24XX_SZ_USBDEV SZ_1M /* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00700000) -#define S3C2400_PA_WATCHDOG (0x15300000) +#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG #define S3C2410_PA_WATCHDOG (0x53000000) #define S3C24XX_SZ_WATCHDOG SZ_1M /* IIC hardware controller */ -#define S3C2400_PA_IIC (0x15400000) #define S3C2410_PA_IIC (0x54000000) #define S3C24XX_SZ_IIC SZ_1M /* IIS controller */ -#define S3C2400_PA_IIS (0x15508000) #define S3C2410_PA_IIS (0x55000000) #define S3C24XX_SZ_IIS SZ_1M @@ -116,27 +83,23 @@ * it is the same distance apart from the UART in the * phsyical address space, as the initial mapping for the IO * is done as a 1:1 maping. This puts it (currently) at - * 0xF6800000, which is not in the way of any current mapping + * 0xFA800000, which is not in the way of any current mapping * by the base system. */ -#define S3C2400_PA_GPIO (0x15600000) #define S3C2410_PA_GPIO (0x56000000) #define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) #define S3C24XX_SZ_GPIO SZ_1M /* RTC */ -#define S3C2400_PA_RTC (0x15700040) #define S3C2410_PA_RTC (0x57000000) #define S3C24XX_SZ_RTC SZ_1M /* ADC */ -#define S3C2400_PA_ADC (0x15800000) #define S3C2410_PA_ADC (0x58000000) #define S3C24XX_SZ_ADC SZ_1M /* SPI */ -#define S3C2400_PA_SPI (0x15900000) #define S3C2410_PA_SPI (0x59000000) #define S3C24XX_SZ_SPI SZ_1M @@ -177,37 +140,8 @@ #define S3C2410_SDRAM_PA (S3C2410_CS6) -#define S3C2400_CS0 (0x00000000) -#define S3C2400_CS1 (0x02000000) -#define S3C2400_CS2 (0x04000000) -#define S3C2400_CS3 (0x06000000) -#define S3C2400_CS4 (0x08000000) -#define S3C2400_CS5 (0x0A000000) -#define S3C2400_CS6 (0x0C000000) -#define S3C2400_CS7 (0x0E000000) - -#define S3C2400_SDRAM_PA (S3C2400_CS6) - /* Use a single interface for common resources between S3C24XX cpus */ -#ifdef CONFIG_CPU_S3C2400 -#define S3C24XX_PA_IRQ S3C2400_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST -#define S3C24XX_PA_DMA S3C2400_PA_DMA -#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR -#define S3C24XX_PA_LCD S3C2400_PA_LCD -#define S3C24XX_PA_UART S3C2400_PA_UART -#define S3C24XX_PA_TIMER S3C2400_PA_TIMER -#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG -#define S3C24XX_PA_IIC S3C2400_PA_IIC -#define S3C24XX_PA_IIS S3C2400_PA_IIS -#define S3C24XX_PA_GPIO S3C2400_PA_GPIO -#define S3C24XX_PA_RTC S3C2400_PA_RTC -#define S3C24XX_PA_ADC S3C2400_PA_ADC -#define S3C24XX_PA_SPI S3C2400_PA_SPI -#else #define S3C24XX_PA_IRQ S3C2410_PA_IRQ #define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL #define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST @@ -224,7 +158,6 @@ #define S3C24XX_PA_RTC S3C2410_PA_RTC #define S3C24XX_PA_ADC S3C2410_PA_ADC #define S3C24XX_PA_SPI S3C2410_PA_SPI -#endif /* deal with the registers that move under the 2412/2413 */ diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h index 4be6a74c430..533e2436e70 100644 --- a/include/asm-arm/arch-s3c2410/memory.h +++ b/include/asm-arm/arch-s3c2410/memory.h @@ -11,20 +11,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -/* - * DRAM starts at 0x30000000 for S3C2410/S3C2440 - * and at 0x0C000000 for S3C2400 - */ -#ifdef CONFIG_CPU_S3C2400 -#define PHYS_OFFSET UL(0x0C000000) -#else #define PHYS_OFFSET UL(0x30000000) -#endif - -/* - * These are exactly the same on the S3C2410 as the - * physical memory view. -*/ #define __virt_to_bus(x) __virt_to_phys(x) #define __bus_to_virt(x) __phys_to_virt(x) diff --git a/include/asm-arm/arch-s3c2410/nand.h b/include/asm-arm/arch-s3c2410/nand.h deleted file mode 100644 index 8816f7f9cee..00000000000 --- a/include/asm-arm/arch-s3c2410/nand.h +++ /dev/null @@ -1,45 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/nand.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - NAND device controller platfrom_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* struct s3c2410_nand_set - * - * define an set of one or more nand chips registered with an unique mtd - * - * nr_chips = number of chips in this set - * nr_partitions = number of partitions pointed to be partitoons (or zero) - * name = name of set (optional) - * nr_map = map for low-layer logical to physical chip numbers (option) - * partitions = mtd partition list -*/ - -struct s3c2410_nand_set { - int nr_chips; - int nr_partitions; - char *name; - int *nr_map; - struct mtd_partition *partitions; -}; - -struct s3c2410_platform_nand { - /* timing information for controller, all times in nanoseconds */ - - int tacls; /* time for active CLE/ALE to nWE/nOE */ - int twrph0; /* active time for nWE/nOE */ - int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ - - int nr_sets; - struct s3c2410_nand_set *sets; - - void (*select_chip)(struct s3c2410_nand_set *, - int chip); -}; - diff --git a/include/asm-arm/arch-s3c2410/regs-ac97.h b/include/asm-arm/arch-s3c2410/regs-ac97.h deleted file mode 100644 index b004dee6bca..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-ac97.h +++ /dev/null @@ -1,67 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-ac97.h - * - * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 AC97 Controller -*/ - -#ifndef __ASM_ARCH_REGS_AC97_H -#define __ASM_ARCH_REGS_AC97_H __FILE__ - -#define S3C_AC97_GLBCTRL (0x00) - -#define S3C_AC97_GLBCTRL_CODECREADYIE (1<<22) -#define S3C_AC97_GLBCTRL_PCMOUTURIE (1<<21) -#define S3C_AC97_GLBCTRL_PCMINORIE (1<<20) -#define S3C_AC97_GLBCTRL_MICINORIE (1<<19) -#define S3C_AC97_GLBCTRL_PCMOUTTIE (1<<18) -#define S3C_AC97_GLBCTRL_PCMINTIE (1<<17) -#define S3C_AC97_GLBCTRL_MICINTIE (1<<16) -#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF (0<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO (1<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA (2<<12) -#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK (3<<12) -#define S3C_AC97_GLBCTRL_PCMINTM_OFF (0<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_PIO (1<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_DMA (2<<10) -#define S3C_AC97_GLBCTRL_PCMINTM_MASK (3<<10) -#define S3C_AC97_GLBCTRL_MICINTM_OFF (0<<8) -#define S3C_AC97_GLBCTRL_MICINTM_PIO (1<<8) -#define S3C_AC97_GLBCTRL_MICINTM_DMA (2<<8) -#define S3C_AC97_GLBCTRL_MICINTM_MASK (3<<8) -#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE (1<<3) -#define S3C_AC97_GLBCTRL_ACLINKON (1<<2) -#define S3C_AC97_GLBCTRL_WARMRESET (1<<1) -#define S3C_AC97_GLBCTRL_COLDRESET (1<<0) - -#define S3C_AC97_GLBSTAT (0x04) - -#define S3C_AC97_GLBSTAT_CODECREADY (1<<22) -#define S3C_AC97_GLBSTAT_PCMOUTUR (1<<21) -#define S3C_AC97_GLBSTAT_PCMINORI (1<<20) -#define S3C_AC97_GLBSTAT_MICINORI (1<<19) -#define S3C_AC97_GLBSTAT_PCMOUTTI (1<<18) -#define S3C_AC97_GLBSTAT_PCMINTI (1<<17) -#define S3C_AC97_GLBSTAT_MICINTI (1<<16) -#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE (0<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_INIT (1<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_READY (2<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE (3<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_LP (4<<0) -#define S3C_AC97_GLBSTAT_MAINSTATE_WARM (5<<0) - -#define S3C_AC97_CODEC_CMD (0x08) - -#define S3C_AC97_CODEC_CMD_READ (1<<23) - -#define S3C_AC97_STAT (0x0c) -#define S3C_AC97_PCM_ADDR (0x10) -#define S3C_AC97_PCM_DATA (0x18) -#define S3C_AC97_MIC_DATA (0x1C) - -#endif /* __ASM_ARCH_REGS_AC97_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-adc.h b/include/asm-arm/arch-s3c2410/regs-adc.h deleted file mode 100644 index c7f231963e7..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-adc.h +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-adc.h - * - * Copyright (c) 2004 Shannon Holland <holland@loser.net> - * - * This program is free software; yosu can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 ADC registers -*/ - -#ifndef __ASM_ARCH_REGS_ADC_H -#define __ASM_ARCH_REGS_ADC_H "regs-adc.h" - -#define S3C2410_ADCREG(x) (x) - -#define S3C2410_ADCCON S3C2410_ADCREG(0x00) -#define S3C2410_ADCTSC S3C2410_ADCREG(0x04) -#define S3C2410_ADCDLY S3C2410_ADCREG(0x08) -#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C) -#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) - - -/* ADCCON Register Bits */ -#define S3C2410_ADCCON_ECFLG (1<<15) -#define S3C2410_ADCCON_PRSCEN (1<<14) -#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6) -#define S3C2410_ADCCON_PRSCVLMASK (0xFF<<6) -#define S3C2410_ADCCON_SELMUX(x) (((x)&0x7)<<3) -#define S3C2410_ADCCON_MUXMASK (0x7<<3) -#define S3C2410_ADCCON_STDBM (1<<2) -#define S3C2410_ADCCON_READ_START (1<<1) -#define S3C2410_ADCCON_ENABLE_START (1<<0) -#define S3C2410_ADCCON_STARTMASK (0x3<<0) - - -/* ADCTSC Register Bits */ -#define S3C2410_ADCTSC_YM_SEN (1<<7) -#define S3C2410_ADCTSC_YP_SEN (1<<6) -#define S3C2410_ADCTSC_XM_SEN (1<<5) -#define S3C2410_ADCTSC_XP_SEN (1<<4) -#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3) -#define S3C2410_ADCTSC_AUTO_PST (1<<2) -#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0) - -/* ADCDAT0 Bits */ -#define S3C2410_ADCDAT0_UPDOWN (1<<15) -#define S3C2410_ADCDAT0_AUTO_PST (1<<14) -#define S3C2410_ADCDAT0_XY_PST (0x3<<12) -#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF) - -/* ADCDAT1 Bits */ -#define S3C2410_ADCDAT1_UPDOWN (1<<15) -#define S3C2410_ADCDAT1_AUTO_PST (1<<14) -#define S3C2410_ADCDAT1_XY_PST (0x3<<12) -#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF) - -#endif /* __ASM_ARCH_REGS_ADC_H */ - - diff --git a/include/asm-arm/arch-s3c2410/regs-iic.h b/include/asm-arm/arch-s3c2410/regs-iic.h deleted file mode 100644 index 2ae29522f25..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-iic.h +++ /dev/null @@ -1,56 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-iic.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 I2C Controller -*/ - -#ifndef __ASM_ARCH_REGS_IIC_H -#define __ASM_ARCH_REGS_IIC_H __FILE__ - -/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */ - -#define S3C2410_IICREG(x) (x) - -#define S3C2410_IICCON S3C2410_IICREG(0x00) -#define S3C2410_IICSTAT S3C2410_IICREG(0x04) -#define S3C2410_IICADD S3C2410_IICREG(0x08) -#define S3C2410_IICDS S3C2410_IICREG(0x0C) -#define S3C2440_IICLC S3C2410_IICREG(0x10) - -#define S3C2410_IICCON_ACKEN (1<<7) -#define S3C2410_IICCON_TXDIV_16 (0<<6) -#define S3C2410_IICCON_TXDIV_512 (1<<6) -#define S3C2410_IICCON_IRQEN (1<<5) -#define S3C2410_IICCON_IRQPEND (1<<4) -#define S3C2410_IICCON_SCALE(x) ((x)&15) -#define S3C2410_IICCON_SCALEMASK (0xf) - -#define S3C2410_IICSTAT_MASTER_RX (2<<6) -#define S3C2410_IICSTAT_MASTER_TX (3<<6) -#define S3C2410_IICSTAT_SLAVE_RX (0<<6) -#define S3C2410_IICSTAT_SLAVE_TX (1<<6) -#define S3C2410_IICSTAT_MODEMASK (3<<6) - -#define S3C2410_IICSTAT_START (1<<5) -#define S3C2410_IICSTAT_BUSBUSY (1<<5) -#define S3C2410_IICSTAT_TXRXEN (1<<4) -#define S3C2410_IICSTAT_ARBITR (1<<3) -#define S3C2410_IICSTAT_ASSLAVE (1<<2) -#define S3C2410_IICSTAT_ADDR0 (1<<1) -#define S3C2410_IICSTAT_LASTBIT (1<<0) - -#define S3C2410_IICLC_SDA_DELAY0 (0 << 0) -#define S3C2410_IICLC_SDA_DELAY5 (1 << 0) -#define S3C2410_IICLC_SDA_DELAY10 (2 << 0) -#define S3C2410_IICLC_SDA_DELAY15 (3 << 0) -#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0) - -#define S3C2410_IICLC_FILTER_ON (1<<2) - -#endif /* __ASM_ARCH_REGS_IIC_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-iis.h b/include/asm-arm/arch-s3c2410/regs-iis.h deleted file mode 100644 index eaf77916a60..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-iis.h +++ /dev/null @@ -1,77 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-iis.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 IIS register definition -*/ - -#ifndef __ASM_ARCH_REGS_IIS_H -#define __ASM_ARCH_REGS_IIS_H - -#define S3C2410_IISCON (0x00) - -#define S3C2410_IISCON_LRINDEX (1<<8) -#define S3C2410_IISCON_TXFIFORDY (1<<7) -#define S3C2410_IISCON_RXFIFORDY (1<<6) -#define S3C2410_IISCON_TXDMAEN (1<<5) -#define S3C2410_IISCON_RXDMAEN (1<<4) -#define S3C2410_IISCON_TXIDLE (1<<3) -#define S3C2410_IISCON_RXIDLE (1<<2) -#define S3C2410_IISCON_PSCEN (1<<1) -#define S3C2410_IISCON_IISEN (1<<0) - -#define S3C2410_IISMOD (0x04) - -#define S3C2440_IISMOD_MPLL (1<<9) -#define S3C2410_IISMOD_SLAVE (1<<8) -#define S3C2410_IISMOD_NOXFER (0<<6) -#define S3C2410_IISMOD_RXMODE (1<<6) -#define S3C2410_IISMOD_TXMODE (2<<6) -#define S3C2410_IISMOD_TXRXMODE (3<<6) -#define S3C2410_IISMOD_LR_LLOW (0<<5) -#define S3C2410_IISMOD_LR_RLOW (1<<5) -#define S3C2410_IISMOD_IIS (0<<4) -#define S3C2410_IISMOD_MSB (1<<4) -#define S3C2410_IISMOD_8BIT (0<<3) -#define S3C2410_IISMOD_16BIT (1<<3) -#define S3C2410_IISMOD_BITMASK (1<<3) -#define S3C2410_IISMOD_256FS (0<<2) -#define S3C2410_IISMOD_384FS (1<<2) -#define S3C2410_IISMOD_16FS (0<<0) -#define S3C2410_IISMOD_32FS (1<<0) -#define S3C2410_IISMOD_48FS (2<<0) -#define S3C2410_IISMOD_FS_MASK (3<<0) - -#define S3C2410_IISPSR (0x08) -#define S3C2410_IISPSR_INTMASK (31<<5) -#define S3C2410_IISPSR_INTSHIFT (5) -#define S3C2410_IISPSR_EXTMASK (31<<0) -#define S3C2410_IISPSR_EXTSHFIT (0) - -#define S3C2410_IISFCON (0x0c) - -#define S3C2410_IISFCON_TXDMA (1<<15) -#define S3C2410_IISFCON_RXDMA (1<<14) -#define S3C2410_IISFCON_TXENABLE (1<<13) -#define S3C2410_IISFCON_RXENABLE (1<<12) -#define S3C2410_IISFCON_TXMASK (0x3f << 6) -#define S3C2410_IISFCON_TXSHIFT (6) -#define S3C2410_IISFCON_RXMASK (0x3f) -#define S3C2410_IISFCON_RXSHIFT (0) - -#define S3C2400_IISFCON_TXDMA (1<<11) -#define S3C2400_IISFCON_RXDMA (1<<10) -#define S3C2400_IISFCON_TXENABLE (1<<9) -#define S3C2400_IISFCON_RXENABLE (1<<8) -#define S3C2400_IISFCON_TXMASK (0x07 << 4) -#define S3C2400_IISFCON_TXSHIFT (4) -#define S3C2400_IISFCON_RXMASK (0x07) -#define S3C2400_IISFCON_RXSHIFT (0) - -#define S3C2410_IISFIFO (0x10) -#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h index b7faeb04c0f..76fe5f69342 100644 --- a/include/asm-arm/arch-s3c2410/regs-lcd.h +++ b/include/asm-arm/arch-s3c2410/regs-lcd.h @@ -12,7 +12,7 @@ #ifndef ___ASM_ARCH_REGS_LCD_H #define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $" -#define S3C2410_LCDREG(x) ((x) + S3C24XX_VA_LCD) +#define S3C2410_LCDREG(x) (x) /* LCD control registers */ #define S3C2410_LCDCON1 S3C2410_LCDREG(0x00) diff --git a/include/asm-arm/arch-s3c2410/regs-nand.h b/include/asm-arm/arch-s3c2410/regs-nand.h deleted file mode 100644 index b824d371ae0..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-nand.h +++ /dev/null @@ -1,123 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-nand.h - * - * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 NAND register definitions -*/ - -#ifndef __ASM_ARM_REGS_NAND -#define __ASM_ARM_REGS_NAND "$Id: nand.h,v 1.3 2003/12/09 11:36:29 ben Exp $" - - -#define S3C2410_NFREG(x) (x) - -#define S3C2410_NFCONF S3C2410_NFREG(0x00) -#define S3C2410_NFCMD S3C2410_NFREG(0x04) -#define S3C2410_NFADDR S3C2410_NFREG(0x08) -#define S3C2410_NFDATA S3C2410_NFREG(0x0C) -#define S3C2410_NFSTAT S3C2410_NFREG(0x10) -#define S3C2410_NFECC S3C2410_NFREG(0x14) - -#define S3C2440_NFCONT S3C2410_NFREG(0x04) -#define S3C2440_NFCMD S3C2410_NFREG(0x08) -#define S3C2440_NFADDR S3C2410_NFREG(0x0C) -#define S3C2440_NFDATA S3C2410_NFREG(0x10) -#define S3C2440_NFECCD0 S3C2410_NFREG(0x14) -#define S3C2440_NFECCD1 S3C2410_NFREG(0x18) -#define S3C2440_NFECCD S3C2410_NFREG(0x1C) -#define S3C2440_NFSTAT S3C2410_NFREG(0x20) -#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24) -#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28) -#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C) -#define S3C2440_NFMECC1 S3C2410_NFREG(0x30) -#define S3C2440_NFSECC S3C24E10_NFREG(0x34) -#define S3C2440_NFSBLK S3C2410_NFREG(0x38) -#define S3C2440_NFEBLK S3C2410_NFREG(0x3C) - -#define S3C2412_NFSBLK S3C2410_NFREG(0x20) -#define S3C2412_NFEBLK S3C2410_NFREG(0x24) -#define S3C2412_NFSTAT S3C2410_NFREG(0x28) -#define S3C2412_NFMECC_ERR0 S3C2410_NFREG(0x2C) -#define S3C2412_NFMECC_ERR1 S3C2410_NFREG(0x30) -#define S3C2412_NFMECC0 S3C2410_NFREG(0x34) -#define S3C2412_NFMECC1 S3C2410_NFREG(0x38) -#define S3C2412_NFSECC S3C2410_NFREG(0x3C) - -#define S3C2410_NFCONF_EN (1<<15) -#define S3C2410_NFCONF_512BYTE (1<<14) -#define S3C2410_NFCONF_4STEP (1<<13) -#define S3C2410_NFCONF_INITECC (1<<12) -#define S3C2410_NFCONF_nFCE (1<<11) -#define S3C2410_NFCONF_TACLS(x) ((x)<<8) -#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) -#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) - -#define S3C2410_NFSTAT_BUSY (1<<0) - -#define S3C2440_NFCONF_BUSWIDTH_8 (0<<0) -#define S3C2440_NFCONF_BUSWIDTH_16 (1<<0) -#define S3C2440_NFCONF_ADVFLASH (1<<3) -#define S3C2440_NFCONF_TACLS(x) ((x)<<12) -#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8) -#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4) - -#define S3C2440_NFCONT_LOCKTIGHT (1<<13) -#define S3C2440_NFCONT_SOFTLOCK (1<<12) -#define S3C2440_NFCONT_ILLEGALACC_EN (1<<10) -#define S3C2440_NFCONT_RNBINT_EN (1<<9) -#define S3C2440_NFCONT_RN_FALLING (1<<8) -#define S3C2440_NFCONT_SPARE_ECCLOCK (1<<6) -#define S3C2440_NFCONT_MAIN_ECCLOCK (1<<5) -#define S3C2440_NFCONT_INITECC (1<<4) -#define S3C2440_NFCONT_nFCE (1<<1) -#define S3C2440_NFCONT_ENABLE (1<<0) - -#define S3C2440_NFSTAT_READY (1<<0) -#define S3C2440_NFSTAT_nCE (1<<1) -#define S3C2440_NFSTAT_RnB_CHANGE (1<<2) -#define S3C2440_NFSTAT_ILLEGAL_ACCESS (1<<3) - -#define S3C2412_NFCONF_NANDBOOT (1<<31) -#define S3C2412_NFCONF_ECCCLKCON (1<<30) -#define S3C2412_NFCONF_ECC_MLC (1<<24) -#define S3C2412_NFCONF_TACLS_MASK (7<<12) /* 1 extra bit of Tacls */ - -#define S3C2412_NFCONT_ECC4_DIRWR (1<<18) -#define S3C2412_NFCONT_LOCKTIGHT (1<<17) -#define S3C2412_NFCONT_SOFTLOCK (1<<16) -#define S3C2412_NFCONT_ECC4_ENCINT (1<<13) -#define S3C2412_NFCONT_ECC4_DECINT (1<<12) -#define S3C2412_NFCONT_MAIN_ECC_LOCK (1<<7) -#define S3C2412_NFCONT_INIT_MAIN_ECC (1<<5) -#define S3C2412_NFCONT_nFCE1 (1<<2) -#define S3C2412_NFCONT_nFCE0 (1<<1) - -#define S3C2412_NFSTAT_ECC_ENCDONE (1<<7) -#define S3C2412_NFSTAT_ECC_DECDONE (1<<6) -#define S3C2412_NFSTAT_ILLEGAL_ACCESS (1<<5) -#define S3C2412_NFSTAT_RnB_CHANGE (1<<4) -#define S3C2412_NFSTAT_nFCE1 (1<<3) -#define S3C2412_NFSTAT_nFCE0 (1<<2) -#define S3C2412_NFSTAT_Res1 (1<<1) -#define S3C2412_NFSTAT_READY (1<<0) - -#define S3C2412_NFECCERR_SERRDATA(x) (((x) >> 21) & 0xf) -#define S3C2412_NFECCERR_SERRBIT(x) (((x) >> 18) & 0x7) -#define S3C2412_NFECCERR_MERRDATA(x) (((x) >> 7) & 0x3ff) -#define S3C2412_NFECCERR_MERRBIT(x) (((x) >> 4) & 0x7) -#define S3C2412_NFECCERR_SPARE_ERR(x) (((x) >> 2) & 0x3) -#define S3C2412_NFECCERR_MAIN_ERR(x) (((x) >> 2) & 0x3) -#define S3C2412_NFECCERR_NONE (0) -#define S3C2412_NFECCERR_1BIT (1) -#define S3C2412_NFECCERR_MULTIBIT (2) -#define S3C2412_NFECCERR_ECCAREA (3) - - - -#endif /* __ASM_ARM_REGS_NAND */ - diff --git a/include/asm-arm/arch-s3c2410/regs-rtc.h b/include/asm-arm/arch-s3c2410/regs-rtc.h deleted file mode 100644 index 93b03c49710..00000000000 --- a/include/asm-arm/arch-s3c2410/regs-rtc.h +++ /dev/null @@ -1,61 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-rtc.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Internal RTC register definition -*/ - -#ifndef __ASM_ARCH_REGS_RTC_H -#define __ASM_ARCH_REGS_RTC_H __FILE__ - -#define S3C2410_RTCREG(x) (x) - -#define S3C2410_RTCCON S3C2410_RTCREG(0x40) -#define S3C2410_RTCCON_RTCEN (1<<0) -#define S3C2410_RTCCON_CLKSEL (1<<1) -#define S3C2410_RTCCON_CNTSEL (1<<2) -#define S3C2410_RTCCON_CLKRST (1<<3) - -#define S3C2410_TICNT S3C2410_RTCREG(0x44) -#define S3C2410_TICNT_ENABLE (1<<7) - -#define S3C2410_RTCALM S3C2410_RTCREG(0x50) -#define S3C2410_RTCALM_ALMEN (1<<6) -#define S3C2410_RTCALM_YEAREN (1<<5) -#define S3C2410_RTCALM_MONEN (1<<4) -#define S3C2410_RTCALM_DAYEN (1<<3) -#define S3C2410_RTCALM_HOUREN (1<<2) -#define S3C2410_RTCALM_MINEN (1<<1) -#define S3C2410_RTCALM_S |