diff options
Diffstat (limited to 'include/asm-arm/arch-omap')
34 files changed, 4027 insertions, 0 deletions
diff --git a/include/asm-arm/arch-omap/aic23.h b/include/asm-arm/arch-omap/aic23.h new file mode 100644 index 00000000000..590bac25b7c --- /dev/null +++ b/include/asm-arm/arch-omap/aic23.h @@ -0,0 +1,112 @@ +/* + * linux/include/asm-arm/arch-omap/aic23.h + * + * Hardware definitions for TI TLV320AIC23 audio codec + * + * Copyright (C) 2002 RidgeRun, Inc. + * Author: Steve Johnson + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_AIC23_H +#define __ASM_ARCH_AIC23_H + +// Codec TLV320AIC23 +#define LEFT_LINE_VOLUME_ADDR 0x00 +#define RIGHT_LINE_VOLUME_ADDR 0x01 +#define LEFT_CHANNEL_VOLUME_ADDR 0x02 +#define RIGHT_CHANNEL_VOLUME_ADDR 0x03 +#define ANALOG_AUDIO_CONTROL_ADDR 0x04 +#define DIGITAL_AUDIO_CONTROL_ADDR 0x05 +#define POWER_DOWN_CONTROL_ADDR 0x06 +#define DIGITAL_AUDIO_FORMAT_ADDR 0x07 +#define SAMPLE_RATE_CONTROL_ADDR 0x08 +#define DIGITAL_INTERFACE_ACT_ADDR 0x09 +#define RESET_CONTROL_ADDR 0x0F + +// Left (right) line input volume control register +#define LRS_ENABLED 0x0100 +#define LIM_MUTED 0x0080 +#define LIV_DEFAULT 0x0017 +#define LIV_MAX 0x001f +#define LIV_MIN 0x0000 + +// Left (right) channel headphone volume control register +#define LZC_ON 0x0080 +#define LHV_DEFAULT 0x0079 +#define LHV_MAX 0x007f +#define LHV_MIN 0x0000 + +// Analog audio path control register +#define STE_ENABLED 0x0020 +#define DAC_SELECTED 0x0010 +#define BYPASS_ON 0x0008 +#define INSEL_MIC 0x0004 +#define MICM_MUTED 0x0002 +#define MICB_20DB 0x0001 + +// Digital audio path control register +#define DACM_MUTE 0x0008 +#define DEEMP_32K 0x0002 +#define DEEMP_44K 0x0004 +#define DEEMP_48K 0x0006 +#define ADCHP_ON 0x0001 + +// Power control down register +#define DEVICE_POWER_OFF 0x0080 +#define CLK_OFF 0x0040 +#define OSC_OFF 0x0020 +#define OUT_OFF 0x0010 +#define DAC_OFF 0x0008 +#define ADC_OFF 0x0004 +#define MIC_OFF 0x0002 +#define LINE_OFF 0x0001 + +// Digital audio interface register +#define MS_MASTER 0x0040 +#define LRSWAP_ON 0x0020 +#define LRP_ON 0x0010 +#define IWL_16 0x0000 +#define IWL_20 0x0004 +#define IWL_24 0x0008 +#define IWL_32 0x000C +#define FOR_I2S 0x0002 +#define FOR_DSP 0x0003 + +// Sample rate control register +#define CLKOUT_HALF 0x0080 +#define CLKIN_HALF 0x0040 +#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode +#define USB_CLK_ON 0x0001 +#define SR_MASK 0xf +#define CLKOUT_SHIFT 7 +#define CLKIN_SHIFT 6 +#define SR_SHIFT 2 +#define BOSR_SHIFT 1 + +// Digital interface register +#define ACT_ON 0x0001 + +#define TLV320AIC23ID1 (0x1a) // cs low +#define TLV320AIC23ID2 (0x1b) // cs high + +#endif /* __ASM_ARCH_AIC23_H */ diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h new file mode 100644 index 00000000000..60f002b7298 --- /dev/null +++ b/include/asm-arm/arch-omap/board-h2.h @@ -0,0 +1,47 @@ +/* + * linux/include/asm-arm/arch-omap/board-h2.h + * + * Hardware definitions for TI OMAP1610 H2 board. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_H2_H +#define __ASM_ARCH_OMAP_H2_H + +/* Placeholder for H2 specific defines */ + +/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ +#define OMAP1610_ETHR_START 0x04000300 + +/* Intel STRATA NOR flash at CS3 or CS2B(NAND Boot) */ +#define OMAP_NOR_FLASH_SIZE SZ_32M +#define OMAP_NOR_FLASH_START1 0x0C000000 /* CS3 */ +#define OMAP_NOR_FLASH_START2 0x0A000000 /* CS2B */ + +/* Samsung NAND flash at CS2B or CS3(NAND Boot) */ +#define OMAP_NAND_FLASH_START1 0x0A000000 /* CS2B */ +#define OMAP_NAND_FLASH_START2 0x0C000000 /* CS3 */ + +#endif /* __ASM_ARCH_OMAP_H2_H */ + diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h new file mode 100644 index 00000000000..e4d1cd23173 --- /dev/null +++ b/include/asm-arm/arch-omap/board-h3.h @@ -0,0 +1,49 @@ +/* + * linux/include/asm-arm/arch-omap/board-h3.h + * + * Copyright (C) 2001 RidgeRun, Inc. + * Copyright (C) 2004 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_ARCH_OMAP_H3_H +#define __ASM_ARCH_OMAP_H3_H + +/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ +#define OMAP1710_ETHR_START 0x04000300 + +/* Intel STRATA NOR flash at CS3 or CS2B(NAND Boot) */ +#define OMAP_NOR_FLASH_SIZE SZ_32M +#define OMAP_NOR_FLASH_START1 0x0C000000 /* CS3 */ +#define OMAP_NOR_FLASH_START2 0x0A000000 /* CS2B */ + +/* Samsung NAND flash at CS2B or CS3(NAND Boot) */ +#define OMAP_NAND_FLASH_START1 0x0A000000 /* CS2B */ +#define OMAP_NAND_FLASH_START2 0x0C000000 /* CS3 */ + +#define MAXIRQNUM (IH_BOARD_BASE) +#define MAXFIQNUM MAXIRQNUM +#define MAXSWINUM MAXIRQNUM + +#define NR_IRQS (MAXIRQNUM + 1) + + +#endif /* __ASM_ARCH_OMAP_H3_H */ diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h new file mode 100644 index 00000000000..79138dcfb4a --- /dev/null +++ b/include/asm-arm/arch-omap/board-h4.h @@ -0,0 +1,35 @@ +/* + * linux/include/asm-arm/arch-omap/board-h4.h + * + * Hardware definitions for TI OMAP1610 H4 board. + * + * Initial creation by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_H4_H +#define __ASM_ARCH_OMAP_H4_H + +/* Placeholder for H4 specific defines */ + +#endif /* __ASM_ARCH_OMAP_H4_H */ + diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h new file mode 100644 index 00000000000..0f1abaefe4d --- /dev/null +++ b/include/asm-arm/arch-omap/board-innovator.h @@ -0,0 +1,80 @@ +/* + * linux/include/asm-arm/arch-omap/board-innovator.h + * + * Copyright (C) 2001 RidgeRun, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_ARCH_OMAP_INNOVATOR_H +#define __ASM_ARCH_OMAP_INNOVATOR_H + +#if defined (CONFIG_ARCH_OMAP1510) + +#ifndef OMAP_SDRAM_DEVICE +#define OMAP_SDRAM_DEVICE D256M_1X16_4B +#endif + +#define OMAP1510P1_IMIF_PRI_VALUE 0x00 +#define OMAP1510P1_EMIFS_PRI_VALUE 0x00 +#define OMAP1510P1_EMIFF_PRI_VALUE 0x00 + +/* + * These definitions define an area of FLASH set aside + * for the use of MTD/JFFS2. This is the area of flash + * that a JFFS2 filesystem will reside which is mounted + * at boot with the "root=/dev/mtdblock/0 rw" + * command line option. The flash address used here must + * fall within the legal range defined by rrload for storing + * the filesystem component. This address will be sufficiently + * deep into the overall flash range to avoid the other + * components also stored in flash such as the bootloader, + * the bootloader params, and the kernel. + * The SW2 settings for the map below are: + * 1 off, 2 off, 3 on, 4 off. + */ + +/* Intel flash_0, partitioned as expected by rrload */ +#define OMAP_FLASH_0_BASE 0xD8000000 +#define OMAP_FLASH_0_START 0x00000000 +#define OMAP_FLASH_0_SIZE SZ_16M + +/* Intel flash_1, used for cramfs or other flash file systems */ +#define OMAP_FLASH_1_BASE 0xD9000000 +#define OMAP_FLASH_1_START 0x01000000 +#define OMAP_FLASH_1_SIZE SZ_16M + +#define NR_FPGA_IRQS 24 +#define NR_IRQS IH_BOARD_BASE + NR_FPGA_IRQS + +#ifndef __ASSEMBLY__ +void fpga_write(unsigned char val, int reg); +unsigned char fpga_read(int reg); +#endif + +#endif /* CONFIG_ARCH_OMAP1510 */ + +#if defined (CONFIG_ARCH_OMAP16XX) + +/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ +#define INNOVATOR1610_ETHR_START 0x04000300 + +#endif /* CONFIG_ARCH_OMAP1610 */ +#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */ diff --git a/include/asm-arm/arch-omap/board-netstar.h b/include/asm-arm/arch-omap/board-netstar.h new file mode 100644 index 00000000000..77cc0fb54d5 --- /dev/null +++ b/include/asm-arm/arch-omap/board-netstar.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> + * + * Hardware definitions for OMAP5910 based NetStar board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_NETSTAR_H +#define __ASM_ARCH_NETSTAR_H + +#include <asm/arch/tc.h> + +#define OMAP_NAND_FLASH_START1 OMAP_CS1_PHYS + (1 << 23) +#define OMAP_NAND_FLASH_START2 OMAP_CS1_PHYS + (2 << 23) + +#endif /* __ASM_ARCH_NETSTAR_H */ diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h new file mode 100644 index 00000000000..aaa49a0fbd2 --- /dev/null +++ b/include/asm-arm/arch-omap/board-osk.h @@ -0,0 +1,41 @@ +/* + * linux/include/asm-arm/arch-omap/board-osk.h + * + * Hardware definitions for TI OMAP5912 OSK board. + * + * Written by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_OSK_H +#define __ASM_ARCH_OMAP_OSK_H + +/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ +#define OMAP_OSK_ETHR_START 0x04800300 + +/* Micron NOR flash at CS3 mapped to address 0x0 if BM bit is 1 */ +#define OMAP_OSK_NOR_FLASH_BASE 0xD8000000 +#define OMAP_OSK_NOR_FLASH_SIZE SZ_32M +#define OMAP_OSK_NOR_FLASH_START 0x00000000 + +#endif /* __ASM_ARCH_OMAP_OSK_H */ + diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h new file mode 100644 index 00000000000..0c224cc74fe --- /dev/null +++ b/include/asm-arm/arch-omap/board-perseus2.h @@ -0,0 +1,58 @@ +/* + * linux/include/asm-arm/arch-omap/board-perseus2.h + * + * Copyright 2003 by Texas Instruments Incorporated + * OMAP730 / Perseus2 support by Jean Pihet + * + * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com) + * Author: RidgeRun, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_ARCH_OMAP_PERSEUS2_H +#define __ASM_ARCH_OMAP_PERSEUS2_H + +#include <asm/arch/fpga.h> + +#ifndef OMAP_SDRAM_DEVICE +#define OMAP_SDRAM_DEVICE D256M_1X16_4B +#endif + +/* + * These definitions define an area of FLASH set aside + * for the use of MTD/JFFS2. This is the area of flash + * that a JFFS2 filesystem will reside which is mounted + * at boot with the "root=/dev/mtdblock/0 rw" + * command line option. + */ + +/* Intel flash_0, partitioned as expected by rrload */ +#define OMAP_FLASH_0_BASE 0xD8000000 /* VA */ +#define OMAP_FLASH_0_START 0x00000000 /* PA */ +#define OMAP_FLASH_0_SIZE SZ_32M + +#define MAXIRQNUM IH_BOARD_BASE +#define MAXFIQNUM MAXIRQNUM +#define MAXSWINUM MAXIRQNUM + +#define NR_IRQS (MAXIRQNUM + 1) + +#endif diff --git a/include/asm-arm/arch-omap/board-voiceblue.h b/include/asm-arm/arch-omap/board-voiceblue.h new file mode 100644 index 00000000000..33977b8956f --- /dev/null +++ b/include/asm-arm/arch-omap/board-voiceblue.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> + * + * Hardware definitions for OMAP5910 based VoiceBlue board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_VOICEBLUE_H +#define __ASM_ARCH_VOICEBLUE_H + +#if (EXTERNAL_MAX_NR_PORTS < 4) +#undef EXTERNAL_MAX_NR_PORTS +#define EXTERNAL_MAX_NR_PORTS 4 +#endif + +extern void voiceblue_wdt_enable(void); +extern void voiceblue_wdt_disable(void); +extern void voiceblue_wdt_ping(void); +extern void voiceblue_reset(void); + +#endif /* __ASM_ARCH_VOICEBLUE_H */ + diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h new file mode 100644 index 00000000000..1cefd60b6f2 --- /dev/null +++ b/include/asm-arm/arch-omap/board.h @@ -0,0 +1,126 @@ +/* + * linux/include/asm-arm/arch-omap/board.h + * + * Information structures for board-specific data + * + * Copyright (C) 2004 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + */ + +#ifndef _OMAP_BOARD_H +#define _OMAP_BOARD_H + +#include <linux/config.h> +#include <linux/types.h> + +/* Different peripheral ids */ +#define OMAP_TAG_CLOCK 0x4f01 +#define OMAP_TAG_MMC 0x4f02 +#define OMAP_TAG_UART 0x4f03 +#define OMAP_TAG_USB 0x4f04 +#define OMAP_TAG_LCD 0x4f05 +#define OMAP_TAG_GPIO_SWITCH 0x4f06 + +#define OMAP_TAG_BOOT_REASON 0x4f80 +#define OMAP_TAG_FLASH_PART 0x4f81 + +struct omap_clock_config { + /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ + u8 system_clock_type; +}; + +struct omap_mmc_config { + u8 mmc_blocks; + s16 mmc1_power_pin, mmc2_power_pin; + s16 mmc1_switch_pin, mmc2_switch_pin; +}; + +struct omap_uart_config { + u8 console_uart; + u32 console_speed; +}; + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; +}; + +struct omap_lcd_config { + char panel_name[16]; + char ctrl_name[16]; +}; + +/* Cover: + * high -> closed + * low -> open + * Connection: + * high -> connected + * low -> disconnected + */ +#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000 +#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001 +#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 +struct omap_gpio_switch_config { + char name[12]; + u16 gpio; + int flags:4; + int type:4; + int key_code:24; /* Linux key code */ +}; + +struct omap_flash_part_config { + char part_table[0]; +}; + +struct omap_boot_reason_config { + char reason_str[12]; +}; + + +struct omap_board_config_entry { + u16 tag; + u16 len; + u8 data[0]; +}; + +struct omap_board_config_kernel { + u16 tag; + const void *data; +}; + +extern const void *__omap_get_config(u16 tag, size_t len, int nr); + +#define omap_get_config(tag, type) \ + ((const type *) __omap_get_config((tag), sizeof(type), 0)) +#define omap_get_nr_config(tag, type, nr) \ + ((const type *) __omap_get_config((tag), sizeof(type), (nr))) + +extern const void *omap_get_var_config(u16 tag, size_t *len); + +extern struct omap_board_config_kernel *omap_board_config; +extern int omap_board_config_size; + +#endif diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h new file mode 100644 index 00000000000..e8786713ee5 --- /dev/null +++ b/include/asm-arm/arch-omap/cpu.h @@ -0,0 +1,183 @@ +/* + * linux/include/asm-arm/arch-omap/cpu.h + * + * OMAP cpu type detection + * + * Copyright (C) 2004 Nokia Corporation + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +extern unsigned int system_rev; + +#define OMAP_DIE_ID_0 0xfffe1800 +#define OMAP_DIE_ID_1 0xfffe1804 +#define OMAP_PRODUCTION_ID_0 0xfffe2000 +#define OMAP_PRODUCTION_ID_1 0xfffe2004 +#define OMAP32_ID_0 0xfffed400 +#define OMAP32_ID_1 0xfffed404 + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP +# define MULTI_OMAP +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP1510 +# ifdef OMAP_NAME +# undef MULTI_OMAP +# define MULTI_OMAP +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP +# define MULTI_OMAP +# else +# define OMAP_NAME omap1610 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP +# define MULTI_OMAP +# else +# define OMAP_NAME omap1710 +# endif +#endif + +/* + * Generate various OMAP cpu specific macros, and cpu class + * specific macros + */ +#define GET_OMAP_TYPE ((system_rev >> 24) & 0xff) +#define GET_OMAP_CLASS (system_rev & 0xff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(730, 0x07) +IS_OMAP_TYPE(1510, 0x15) +IS_OMAP_TYPE(1610, 0x16) +IS_OMAP_TYPE(5912, 0x16) +IS_OMAP_TYPE(1710, 0x17) +IS_OMAP_TYPE(2420, 0x24) + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) +IS_OMAP_CLASS(24xx, 0x24) + +/* + * Macros to group OMAP types into cpu classes. + * These can be used in most places. + * cpu_is_omap15xx(): True for 1510 and 5910 + * cpu_is_omap16xx(): True for 1610, 5912 and 1710 + */ +#if defined(MULTI_OMAP) +# define cpu_is_omap7xx() is_omap7xx() +# define cpu_is_omap15xx() is_omap15xx() +# if !(defined(CONFIG_ARCH_OMAP1510) || defined(CONFIG_ARCH_OMAP730)) +# define cpu_is_omap16xx() 1 +# else +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# define cpu_is_omap7xx() 1 +# else +# define cpu_is_omap7xx() 0 +# endif +# if defined(CONFIG_ARCH_OMAP1510) +# define cpu_is_omap15xx() 1 +# else +# define cpu_is_omap15xx() 0 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# define cpu_is_omap16xx() 1 +# else +# define cpu_is_omap16xx() 0 +# endif +#endif + +#if defined(MULTI_OMAP) +# define cpu_is_omap730() is_omap730() +# define cpu_is_omap1510() is_omap1510() +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1710() is_omap1710() +#else +# if defined(CONFIG_ARCH_OMAP730) +# define cpu_is_omap730() 1 +# else +# define cpu_is_omap730() 0 +# endif +# if defined(CONFIG_ARCH_OMAP1510) +# define cpu_is_omap1510() 1 +# else +# define cpu_is_omap1510() 0 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# define cpu_is_omap1610() 1 +# else +# define cpu_is_omap1610() 0 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# define cpu_is_omap5912() 1 +# else +# define cpu_is_omap5912() 0 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1710() is_omap1710() +# else +# define cpu_is_omap1610() 0 +# define cpu_is_omap5912() 0 +# define cpu_is_omap1710() 0 +# endif +# if defined(CONFIG_ARCH_OMAP2420) +# define cpu_is_omap2420() 1 +# else +# define cpu_is_omap2420() 0 +# endif +#endif + +#endif diff --git a/include/asm-arm/arch-omap/debug-macro.S b/include/asm-arm/arch-omap/debug-macro.S new file mode 100644 index 00000000000..83bb458afd0 --- /dev/null +++ b/include/asm-arm/arch-omap/debug-macro.S @@ -0,0 +1,45 @@ +/* linux/include/asm-arm/arch-omap/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0xff000000 @ physical base address + movne \rx, #0xfe000000 @ virtual base + orr \rx, \rx, #0x00fb0000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + orr \rx, \rx, #0x00009000 @ UART 3 +#endif +#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) + orr \rx, \rx, #0x00000800 @ UART 2 & 3 +#endif + .endm + + .macro senduart,rd,rx + strb \rd, [\rx] + .endm + + .macro busyuart,rd,rx +1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends + and \rd, \rd, #0x60 + teq \rd, #0x60 + beq 1002f + ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only + and \rd, \rd, #0x60 + teq \rd, #0x60 + bne 1001b +1002: + .endm + + .macro waituart,rd,rx + .endm diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h new file mode 100644 index 00000000000..d785248377d --- /dev/null +++ b/include/asm-arm/arch-omap/dma.h @@ -0,0 +1,264 @@ +/* + * linux/include/asm-arm/arch-omap/dma.h + * + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#define MAX_DMA_ADDRESS 0xffffffff + +#define OMAP_LOGICAL_DMA_CH_COUNT 17 + +#define OMAP_DMA_NO_DEVICE 0 +#define OMAP_DMA_MCSI1_TX 1 +#define OMAP_DMA_MCSI1_RX 2 +#define OMAP_DMA_I2C_RX 3 +#define OMAP_DMA_I2C_TX 4 +#define OMAP_DMA_EXT_NDMA_REQ 5 +#define OMAP_DMA_EXT_NDMA_REQ2 6 +#define OMAP_DMA_UWIRE_TX 7 +#define OMAP_DMA_MCBSP1_TX 8 +#define OMAP_DMA_MCBSP1_RX 9 +#define OMAP_DMA_MCBSP3_TX 10 +#define OMAP_DMA_MCBSP3_RX 11 +#define OMAP_DMA_UART1_TX 12 +#define OMAP_DMA_UART1_RX 13 +#define OMAP_DMA_UART2_TX 14 +#define OMAP_DMA_UART2_RX 15 +#define OMAP_DMA_MCBSP2_TX 16 +#define OMAP_DMA_MCBSP2_RX 17 +#define OMAP_DMA_UART3_TX 18 +#define OMAP_DMA_UART3_RX 19 +#define OMAP_DMA_CAMERA_IF_RX 20 +#define OMAP_DMA_MMC_TX 21 +#define OMAP_DMA_MMC_RX 22 +#define OMAP_DMA_NAND 23 +#define OMAP_DMA_IRQ_LCD_LINE 24 +#define OMAP_DMA_MEMORY_STICK 25 +#define OMAP_DMA_USB_W2FC_RX0 26 +#define OMAP_DMA_USB_W2FC_RX1 27 +#define OMAP_DMA_USB_W2FC_RX2 28 +#define OMAP_DMA_USB_W2FC_TX0 29 +#define OMAP_DMA_USB_W2FC_TX1 30 +#define OMAP_DMA_USB_W2FC_TX2 31 + +/* These are only for 1610 */ +#define OMAP_DMA_CRYPTO_DES_IN 32 +#define OMAP_DMA_SPI_TX 33 +#define OMAP_DMA_SPI_RX 34 +#define OMAP_DMA_CRYPTO_HASH 35 +#define OMAP_DMA_CCP_ATTN 36 +#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 +#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 +#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 +#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 +#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 +#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 +#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 +#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 +#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 +#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 +#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 +#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 +#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 +#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 +#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 +#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 +#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 +#define OMAP_DMA_MMC2_TX 54 +#define OMAP_DMA_MMC2_RX 55 +#define OMAP_DMA_CRYPTO_DES_OUT 56 + + +#define OMAP_DMA_BASE (0xfffed800) +#define OMAP_DMA_GCR (OMAP_DMA_BASE + 0x400) +#define OMAP_DMA_GSCR (OMAP_DMA_BASE + 0x404) +#define OMAP_DMA_GRST (OMAP_DMA_BASE + 0x408) +#define OMAP_DMA_HW_ID (OMAP_DMA_BASE + 0x442) +#define OMAP_DMA_PCH2_ID (OMAP_DMA_BASE + 0x444) +#define OMAP_DMA_PCH0_ID (OMAP_DMA_BASE + 0x446) +#define OMAP_DMA_PCH1_ID (OMAP_DMA_BASE + 0x448) +#define OMAP_DMA_PCHG_ID (OMAP_DMA_BASE + 0x44a) +#define OMAP_DMA_PCHD_ID (OMAP_DMA_BASE + 0x44c) +#define OMAP_DMA_CAPS_0_U (OMAP_DMA_BASE + 0x44e) +#define OMAP_DMA_CAPS_0_L (OMAP_DMA_BASE + 0x450) +#define OMAP_DMA_CAPS_1_U (OMAP_DMA_BASE + 0x452) +#define OMAP_DMA_CAPS_1_L (OMAP_DMA_BASE + 0x454) +#define OMAP_DMA_CAPS_2 (OMAP_DMA_BASE + 0x456) +#define OMAP_DMA_CAPS_3 (OMAP_DMA_BASE + 0x458) +#define OMAP_DMA_CAPS_4 (OMAP_DMA_BASE + 0x45a) +#define OMAP_DMA_PCH2_SR (OMAP_DMA_BASE + 0x460) +#define OMAP_DMA_PCH0_SR (OMAP_DMA_BASE + 0x480) +#define OMAP_DMA_PCH1_SR (OMAP_DMA_BASE + 0x482) +#define OMAP_DMA_PCHD_SR (OMAP_DMA_BASE + 0x4c0) + +#define OMAP1510_DMA_LCD_BASE (0xfffedb00) +#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) +#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) +#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) +#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) +#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) + +#define OMAP1610_DMA_LCD_BASE (0xfffee300) +#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) +#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) +#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) +#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) +#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) +#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) +#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) +#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) +#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) +#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) +#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) +#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) +#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) +#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) +#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) +#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) +#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) + + +/* Every LCh has its own set of the registers below */ +#define OMAP_DMA_CSDP(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x00) +#define OMAP_DMA_CCR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x02) +#define OMAP_DMA_CICR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x04) +#define OMAP_DMA_CSR(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x06) +#define OMAP_DMA_CSSA_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x08) +#define OMAP_DMA_CSSA_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0a) +#define OMAP_DMA_CDSA_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0c) +#define OMAP_DMA_CDSA_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x0e) +#define OMAP_DMA_CEN(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x10) +#define OMAP_DMA_CFN(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x12) +#define OMAP_DMA_CSFI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x14) +#define OMAP_DMA_CSEI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x16) +#define OMAP_DMA_CSAC(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x18) +#define OMAP_DMA_CDAC(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1a) +#define OMAP_DMA_CDEI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1c) +#define OMAP_DMA_CDFI(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x1e) +#define OMAP_DMA_COLOR_L(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x20) +#define OMAP_DMA_COLOR_U(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x22) +#define OMAP_DMA_CCR2(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x24) +#define OMAP_DMA_CLNK_CTRL(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x28) +#define OMAP_DMA_LCH_CTRL(n) (OMAP_DMA_BASE + 0x40 * (n) + 0x2a) + +#define OMAP_DMA_TOUT_IRQ (1 << 0) +#define OMAP_DMA_DROP_IRQ (1 << 1) +#define OMAP_DMA_HALF_IRQ (1 << 2) +#define OMAP_DMA_FRAME_IRQ (1 << 3) +#define OMAP_DMA_LAST_IRQ (1 << 4) +#define OMAP_DMA_BLOCK_IRQ (1 << 5) +#define OMAP_DMA_SYNC_IRQ (1 << 6) + +#define OMAP_DMA_DATA_TYPE_S8 0x00 +#define OMAP_DMA_DATA_TYPE_S16 0x01 +#define OMAP_DMA_DATA_TYPE_S32 0x02 + +#define OMAP_DMA_SYNC_ELEMENT 0x00 +#define OMAP_DMA_SYNC_FRAME 0x01 +#define OMAP_DMA_SYNC_BLOCK 0x02 + +#define OMAP_DMA_PORT_EMIFF 0x00 +#define OMAP_DMA_PORT_EMIFS 0x01 +#define OMAP_DMA_PORT_OCP_T1 0x02 +#define OMAP_DMA_PORT_TIPB 0x03 +#define OMAP_DMA_PORT_OCP_T2 0x04 +#define OMAP_DMA_PORT_MPUI 0x05 + +#define OMAP_DMA_AMODE_CONSTANT 0x00 +#define OMAP_DMA_AMODE_POST_INC 0x01 +#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 +#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 + +/* LCD DMA block numbers */ +enum { + OMAP_LCD_DMA_B1_TOP, + OMAP_LCD_DMA_B1_BOTTOM, + OMAP_LCD_DMA_B2_TOP, + OMAP_LCD_DMA_B2_BOTTOM +}; + +enum omap_dma_burst_mode { + OMAP_DMA_DATA_BURST_DIS = 0, + OMAP_DMA_DATA_BURST_4, + OMAP_DMA_DATA_BURST_8 +}; + +enum omap_dma_color_mode { + OMAP_DMA_COLOR_DIS = 0, + OMAP_DMA_CONSTANT_FILL, + OMAP_DMA_TRANSPARENT_COPY +}; + +extern void omap_set_dma_priority(int dst_port, int priority); +extern int omap_request_dma(int dev_id, const char *dev_name, + void (* callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch); +extern void omap_enable_dma_irq(int ch, u16 irq_bits); +extern void omap_disable_dma_irq(int ch, u16 irq_bits); +extern void omap_free_dma(int ch); +extern void omap_start_dma(int lch); +extern void omap_stop_dma(int lch); +extern void omap_set_dma_transfer_params(int lch, int data_type, + int elem_count, int frame_count, + int sync_mode); +extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, + u32 color); + +extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, + unsigned long src_start); +extern void omap_set_dma_src_index(int lch, int eidx, int fidx); +extern void omap_set_dma_src_data_pack(int lch, int enable); +extern void omap_set_dma_src_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, + unsigned long dest_start); +extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); +extern void omap_set_dma_dest_data_pack(int lch, int enable); +extern void omap_set_dma_dest_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_dma_link_lch (int lch_head, int lch_queue); +extern void omap_dma_unlink_lch (int lch_head, int lch_queue); + +extern dma_addr_t omap_get_dma_src_pos(int lch); +extern dma_addr_t omap_get_dma_dst_pos(int lch); +extern void omap_clear_dma(int lch); + +/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ +extern int omap_dma_in_1510_mode(void); + +/* LCD DMA functions */ +extern int omap_request_lcd_dma(void (* callback)(u16 status, void *data), + void *data); +extern void omap_free_lcd_dma(void); +extern void omap_setup_lcd_dma(void); +extern void omap_enable_lcd_dma(void); +extern void omap_stop_lcd_dma(void); +extern void omap_set_lcd_dma_ext_controller(int external); +extern void omap_set_lcd_dma_single_transfer(int single); +extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type); +extern void omap_set_lcd_dma_b1_rotation(int rotate); +extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); +extern void omap_set_lcd_dma_b1_mirror(int mirror); +extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); + +#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S new file mode 100644 index 00000000000..57b126889b9 --- /dev/null +++ b/include/asm-arm/arch-omap/entry-macro.S @@ -0,0 +1,32 @@ +/* + * include/asm-arm/arch-omap/entry-macro.S + * + * Low-level IRQ helper macros for OMAP-based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =IO_ADDRESS(OMAP_IH1_BASE) + ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] + ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] + mov \irqstat, #0xffffffff + bic \tmp, \irqstat, \tmp + tst \irqnr, \tmp + beq 1510f + + ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] + cmp \irqnr, #0 + ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] + cmpeq \irqnr, #INT_IH2_IRQ + ldreq \base, =IO_ADDRESS(OMAP_IH2_BASE) + ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] + addeqs \irqnr, \irqnr, #32 +1510: + .endm + diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h new file mode 100644 index 00000000000..676807dc50e --- /dev/null +++ b/include/asm-arm/arch-omap/fpga.h @@ -0,0 +1,196 @@ +/* + * linux/include/asm-arm/arch-omap/fpga.h + * + * Interrupt handler for OMAP-1510 FPGA + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Copyright (C) 2002 MontaVista Software, Inc. + * + * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 + * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_FPGA_H +#define __ASM_ARCH_OMAP_FPGA_H + +#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP1510) +extern void omap1510_fpga_init_irq(void); +#else +#define omap1510_fpga_init_irq() (0) +#endif + +#define fpga_read(reg) __raw_readb(reg) +#define fpga_write(val, reg) __raw_writeb(val, reg) + +/* + * --------------------------------------------------------------------------- + * H2/P2 Debug board FPGA + * --------------------------------------------------------------------------- + */ +/* maps in the FPGA registers and the ETHR registers */ +#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ + +#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) +#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ +#define H2P2_DBG_FPGA_BOARD_REV (H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ +#define H2P2_DBG_FPGA_GPIO (H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ +#define H2P2_DBG_FPGA_LEDS (H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ +#define H2P2_DBG_FPGA_MISC_INPUTS (H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ +#define H2P2_DBG_FPGA_LAN_STATUS (H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ +#define H2P2_DBG_FPGA_LAN_RESET (H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ + +/* NOTE: most boards don't have a static mapping for the FPGA ... */ +struct h2p2_dbg_fpga { + /* offset 0x00 */ + u16 smc91x[8]; + /* offset 0x10 */ + u16 fpga_rev; + u16 board_rev; + u16 gpio_outputs; + u16 leds; + /* offset 0x18 */ + u16 misc_inputs; + u16 lan_status; + u16 lan_reset; + u16 reserved0; + /* offset 0x20 */ + u16 ps2_data; + u16 ps2_ctrl; + /* plus also 4 rs232 ports ... */ +}; + +/* LEDs definition on debug board (16 LEDs, all physically green) */ +#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) +#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) +#define H2P2_DBG_FPGA_LED_RED (1 << 13) +#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) +/* cpu0 load-meter LEDs */ +#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... +#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 +#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) + + +/* + * --------------------------------------------------------------------------- + * OMAP-1510 FPGA + * --------------------------------------------------------------------------- + */ +#define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */ +#define OMAP1510_FPGA_SIZE SZ_4K +#define OMAP1510_FPGA_START 0x08000000 /* Physical */ + +/* Revision */ +#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0) +#define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1) + +#define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2) +#define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3) +#define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4) +#define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5) + +/* Interrupt status */ +#define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6) +#define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7) + +/* Interrupt mask */ +#define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8) +#define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9) + +/* Reset registers */ +#define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa) +#define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb) + +#define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc) +#define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe) +#define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf) +#define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14) +#define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15) +#define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16) +#define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18) +#define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100) +#define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101) +#define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102) + +#define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204) + +#define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205) +#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206) +#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207) +#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208) +#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209) +#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a) +#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b) +#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c) +#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d) +#define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e) +#define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210) + +#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) + +/* + * Power up Giga UART driver, turn on HID clock. + * Turn off BT power, since we're not using it and it + * draws power. + */ +#define OMAP1510_FPGA_RESET_VALUE 0x42 + +#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) +#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) +#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) +#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) +#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) +#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) +#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) +#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) + +/* + * Innovator/OMAP1510 FPGA HID register bit definitions + */ +#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ +#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ +#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ +#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ +#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ +#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ +#define OMAP1510_FPGA_HID_rsrvd (1<<6) +#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ + +/* The FPGA IRQ is cascaded through GPIO_13 */ +#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) + +/* IRQ Numbers for interrupts muxed through the FPGA */ +#define OMAP1510_IH_FPGA_BASE IH_BOARD_BASE +#define OMAP1510_INT_FPGA_ATN (OMAP1510_IH_FPGA_BASE + 0) +#define OMAP1510_INT_FPGA_ACK (OMAP1510_IH_FPGA_BASE + 1) +#define OMAP1510_INT_FPGA2 (OMAP1510_IH_FPGA_BASE + 2) +#define OMAP1510_INT_FPGA3 (OMAP1510_IH_FPGA_BASE + 3) +#define OMAP1510_INT_FPGA4 (OMAP1510_IH_FPGA_BASE + 4) +#define OMAP1510_INT_FPGA5 (OMAP1510_IH_FPGA_BASE + 5) +#define OMAP1510_INT_FPGA6 (OMAP1510_IH_FPGA_BASE + 6) +#define OMAP1510_INT_FPGA7 (OMAP1510_IH_FPGA_BASE + 7) +#define OMAP1510_INT_FPGA8 (OMAP1510_IH_FPGA_BASE + 8) +#define OMAP1510_INT_FPGA9 (OMAP1510_IH_FPGA_BASE + 9) +#define OMAP1510_INT_FPGA10 (OMAP1510_IH_FPGA_BASE + 10) +#define OMAP1510_INT_FPGA11 (OMAP1510_IH_FPGA_BASE + 11) +#define OMAP1510_INT_FPGA12 (OMAP1510_IH_FPGA_BASE + 12) +#define OMAP1510_INT_ETHER (OMAP1510_IH_FPGA_BASE + 13) +#define OMAP1510_INT_FPGAUART1 (OMAP1510_IH_FPGA_BASE + 14) +#define OMAP1510_INT_FPGAUART2 (OMAP1510_IH_FPGA_BASE + 15) +#define OMAP1510_INT_FPGA_TS (OMAP1510_IH_FPGA_BASE + 16) +#define OMAP1510_INT_FPGA17 (OMAP1510_IH_FPGA_BASE + 17) +#define OMAP1510_INT_FPGA_CAM (OMAP1510_IH_FPGA_BASE + 18) +#define OMAP1510_INT_FPGA_RTC_A (OMAP1510_IH_FPGA_BASE + 19) +#define OMAP1510_INT_FPGA_RTC_B (OMAP1510_IH_FPGA_BASE + 20) +#define OMAP1510_INT_FPGA_CD (OMAP1510_IH_FPGA_BASE + 21) +#define OMAP1510_INT_FPGA22 (OMAP1510_IH_FPGA_BASE + 22) +#define OMAP1510_INT_FPGA23 (OMAP1510_IH_FPGA_BASE + 23) + +#endif diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h new file mode 100644 index 00000000000..fad2fc93ee7 --- /dev/null +++ b/include/asm-arm/arch-omap/gpio.h @@ -0,0 +1,69 @@ +/* + * linux/include/asm-arm/arch-omap/gpio.h + * + * OMAP GPIO handling defines and functions + * + * Copyright (C) 2003 Nokia Corporation + * + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_GPIO_H +#define __ASM_ARCH_OMAP_GPIO_H + +#include <asm/arch/hardware.h> +#include <asm/arch/irqs.h> +#include <asm/io.h> + +#define OMAP_MPUIO_BASE 0xfffb5000 +#define OMAP_MPUIO_INPUT_LATCH 0x00 +#define OMAP_MPUIO_OUTPUT 0x04 +#define OMAP_MPUIO_IO_CNTL 0x08 +#define OMAP_MPUIO_KBR_LATCH 0x10 +#define OMAP_MPUIO_KBC 0x14 +#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 +#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c +#define OMAP_MPUIO_KBD_INT 0x20 +#define OMAP_MPUIO_GPIO_INT 0x24 +#define OMAP_MPUIO_KBD_MASKIT 0x28 +#define OMAP_MPUIO_GPIO_MASKIT 0x2c +#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 +#define OMAP_MPUIO_LATCH 0x34 + +#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) +#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) + +#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \ + IH_MPUIO_BASE + ((nr) & 0x0f) : \ + IH_GPIO_BASE + ((nr) & 0x3f)) + +/* For EDGECTRL */ +#define OMAP_GPIO_NO_EDGE 0x00 +#define OMAP_GPIO_FALLING_EDGE 0x01 +#define OMAP_GPIO_RISING_EDGE 0x02 +#define OMAP_GPIO_BOTH_EDGES 0x03 + +extern int omap_gpio_init(void); /* Call from board init only */ +extern int omap_request_gpio(int gpio); +extern void omap_free_gpio(int gpio); +extern void omap_set_gpio_direction(int gpio, int is_input); +extern void omap_set_gpio_dataout(int gpio, int enable); +extern int omap_get_gpio_datain(int gpio); +extern void omap_set_gpio_edge_ctrl(int gpio, int edge); + +#endif diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h new file mode 100644 index 00000000000..37e06c782bd --- /dev/null +++ b/include/asm-arm/arch-omap/hardware.h @@ -0,0 +1,324 @@ +/* + * linux/include/asm-arm/arch-omap/hardware.h + * + * Hardware definitions for TI OMAP processors and boards + * + * NOTE: Please put device driver specific defines into a separate header + * file for each driver. + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> + * + * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> + * and Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_HARDWARE_H +#define __ASM_ARCH_OMAP_HARDWARE_H + +#include <asm/sizes.h> +#include <linux/config.h> +#ifndef __ASSEMBLER__ +#include <asm/types.h> +#include <asm/arch/cpu.h> +#endif +#include <asm/arch/io.h> + +/* + * --------------------------------------------------------------------------- + * Common definitions for all OMAP processors + * NOTE: Put all processor or board specific parts to the special header + * files. + * --------------------------------------------------------------------------- + */ + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE (0xfffece00) +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +#define CK_RATEF 1 +#define CK_IDLEF 2 +#define CK_ENABLEF 4 +#define CK_SELECTF 8 +#define SETARM_IDLE_SHIFT + +/* DPLL control registers */ +#define DPLL_CTL (0xfffecf00) + +/* DSP clock control */ +#define DSP_CONFIG_REG_BASE (0xe1008000) +#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) +#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) + +/* + * --------------------------------------------------------------------------- + * UPLD + * --------------------------------------------------------------------------- + */ +#define ULPD_REG_BASE (0xfffe0800) +#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) +# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ +# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ +#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) +# define SOFT_UDC_REQ (1 << 4) +# define SOFT_USB_CLK_REQ (1 << 3) +# define SOFT_DPLL_REQ (1 << 0) +#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) +#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) +#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) +#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) +#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) +# define DIS_MMC2_DPLL_REQ (1 << 11) +# define DIS_MMC1_DPLL_REQ (1 << 10) +# define DIS_UART3_DPLL_REQ (1 << 9) +# define DIS_UART2_DPLL_REQ (1 << 8) +# define DIS_UART1_DPLL_REQ (1 << 7) +# define DIS_USB_HOST_DPLL_REQ (1 << 6) +#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) +#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* Watchdog timer within the OMAP3.2 gigacell */ +#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) +#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) +#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#define OMAP_IH1_BASE 0xfffecb00 +#define OMAP_IH2_BASE 0xfffe0000 + +#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) +#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) +#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) +#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) +#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) +#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) +#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) + +#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) +#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) +#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) +#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) +#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) +#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) +#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) + +#define IRQ_ITR_REG_OFFSET 0x00 +#define IRQ_MIR_REG_OFFSET 0x04 +#define IRQ_SIR_IRQ_REG_OFFSET 0x10 +#define IRQ_SIR_FIQ_REG_OFFSET 0x14 +#define IRQ_CONTROL_REG_OFFSET 0x18 +#define IRQ_ISR_REG_OFFSET 0x9c +#define IRQ_ILR0_REG_OFFSET 0x1c +#define IRQ_GMR_REG_OFFSET 0xa0 + +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define MOD_CONF_CTRL_0 0xfffe1080 +#define MOD_CONF_CTRL_1 0xfffe1110 + +/* + * ---------------------------------------------------------------------------- + * Pin multiplexing registers + * ---------------------------------------------------------------------------- + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define PULL_DWN_CTRL_4 0xfffe10ac + +/* OMAP-1610 specific multiplexing registers */ +#define FUNC_MUX_CTRL_E 0xfffe1090 +#define FUNC_MUX_CTRL_F 0xfffe1094 +#define FUNC_MUX_CTRL_10 0xfffe1098 +#define FUNC_MUX_CTRL_11 0xfffe109c +#define FUNC_MUX_CTRL_12 0xfffe10a0 +#define PU_PD_SEL_0 0xfffe10b4 +#define PU_PD_SEL_1 0xfffe10b8 +#define PU_PD_SEL_2 0xfffe10bc +#define PU_PD_SEL_3 0xfffe10c0 +#define PU_PD_SEL_4 0xfffe10c4 + +/* Timer32K for 1610 and 1710*/ +#define OMAP_TIMER32K_BASE 0xFFFBC400 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 +#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) +#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 +#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) + +/* + * ---------------------------------------------------------------------------- + * MPUI interface + * ---------------------------------------------------------------------------- + */ +#define MPUI_BASE (0xfffec900) +#define MPUI_CTRL (MPUI_BASE + 0x0) +#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) +#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) +#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) +#define MPUI_STATUS_REG (MPUI_BASE + 0x10) +#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) +#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) +#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) + +/* + * ---------------------------------------------------------------------------- + * LED Pulse Generator + * ---------------------------------------------------------------------------- + */ +#define OMAP_LPG1_BASE 0xfffbd000 +#define OMAP_LPG2_BASE 0xfffbd800 +#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) +#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) +#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) +#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) + +#ifndef __ASSEMBLER__ + +/* + * --------------------------------------------------------------------------- + * Serial ports + * --------------------------------------------------------------------------- + */ +#define OMAP_UART1_BASE (unsigned char *)0xfffb0000 +#define OMAP_UART2_BASE (unsigned char *)0xfffb0800 +#define OMAP_UART3_BASE (unsigned char *)0xfffb9800 +#define OMAP_MAX_NR_PORTS 3 +#define OMAP1510_BASE_BAUD (12000000/16) +#define OMAP16XX_BASE_BAUD (48000000/16) + +#define is_omap_port(p) ({int __ret = 0; \ + if (p == IO_ADDRESS(OMAP_UART1_BASE) || \ + p == IO_ADDRESS(OMAP_UART2_BASE) || \ + p == IO_ADDRESS(OMAP_UART3_BASE)) \ + __ret = 1; \ + __ret; \ + }) + +/* + * --------------------------------------------------------------------------- + * Processor specific defines + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_ARCH_OMAP730 +#include "omap730.h" +#endif + +#ifdef CONFIG_ARCH_OMAP1510 +#include "omap1510.h" +#endif + +#ifdef CONFIG_ARCH_OMAP16XX +#include "omap16xx.h" +#endif + +/* + * --------------------------------------------------------------------------- + * Board specific defines + * --------------------------------------------------------------------------- + */ + +#ifdef CONFIG_MACH_OMAP_INNOVATOR +#include "board-innovator.h" +#endif + +#ifdef CONFIG_MACH_OMAP_H2 +#include "board-h2.h" +#endif + +#ifdef CONFIG_MACH_OMAP_PERSEUS2 +#include "board-perseus2.h" +#endif + +#ifdef CONFIG_MACH_OMAP_H3 +#include "board-h3.h" +#endif + +#ifdef CONFIG_MACH_OMAP_H4 +#include "board-h4.h" +#error "Support for H4 board not yet implemented." +#endif + +#ifdef CONFIG_MACH_OMAP_OSK +#include "board-osk.h" +#endif + +#ifdef CONFIG_MACH_VOICEBLUE +#include "board-voiceblue.h" +#endif + +#ifdef CONFIG_MACH_NETSTAR +#include "board-netstar.h" +#endif + +#endif /* !__ASSEMBLER__ */ + +#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h new file mode 100644 index 00000000000..1c8c9fcc766 --- /dev/null +++ b/include/asm-arm/arch-omap/io.h @@ -0,0 +1,107 @@ +/* + * linux/include/asm-arm/arch-omap/io.h + * + * IO definitions for TI OMAP processors and boards + * + * Copied from linux/include/asm-arm/arch-sa1100/io.h + * Copyright (C) 1997-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Modifications: + * 06-12-1997 RMK Created. + * 07-04-1999 RMK Major cleanup + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) +#define __mem_pci(a) (a) +#define __mem_isa(a) (a) + +/* + * ---------------------------------------------------------------------------- + * I/O mapping + * ---------------------------------------------------------------------------- + */ +#define IO_PHYS 0xFFFB0000 +#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define IO_VIRT (IO_PHYS - IO_OFFSET) +#define IO_SIZE 0x40000 +#define IO_ADDRESS(x) ((x) - IO_OFFSET) + +#define PCIO_BASE 0 + +#define io_p2v(x) ((x) - IO_OFFSET) +#define io_v2p(x) ((x) + IO_OFFSET) + +#ifndef __ASSEMBLER__ + +/* + * Functions to access the OMAP IO region + * + * NOTE: - Use omap_read/write[bwl] for physical register addresses + * - Use __raw_read/write[bwl]() for virtual register addresses + * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses + * - DO NOT use hardcoded virtual addresses to allow changing the + * IO address space again if needed + */ +#define omap_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a)) +#define omap_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a)) +#define omap_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a)) + +#define omap_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v)) +#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v)) +#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v)) + +/* 16 bit uses LDRH/STRH, base +/- offset_8 */ +typedef struct { volatile u16 offset[256]; } __regbase16; +#define __REGV16(vaddr) ((__regbase16 *)((vaddr)&~0xff)) \ + ->offset[((vaddr)&0xff)>>1] +#define __REG16(paddr) __REGV16(io_p2v(paddr)) + +/* 8/32 bit uses LDR/STR, base +/- offset_12 */ +typedef struct { volatile u8 offset[4096]; } __regbase8; +#define __REGV8(vaddr) ((__regbase8 *)((vaddr)&~4095)) \ + ->offset[((vaddr)&4095)>>0] +#define __REG8(paddr) __REGV8(io_p2v(paddr)) + +typedef struct { volatile u32 offset[4096]; } __regbase32; +#define __REGV32(vaddr) ((__regbase32 *)((vaddr)&~4095)) \ + ->offset[((vaddr)&4095)>>2] +#define __REG32(paddr) __REGV32(io_p2v(paddr)) + +#else + +#define __REG8(paddr) io_p2v(paddr) +#define __REG16(paddr) io_p2v(paddr) +#define __REG32(paddr) io_p2v(paddr) + +#endif + +#endif diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h new file mode 100644 index 00000000000..6701fd9e5f9 --- /dev/null +++ b/include/asm-arm/arch-omap/irqs.h @@ -0,0 +1,255 @@ +/* + * linux/include/asm-arm/arch-omap/irqs.h + * + * Copyright (C) Greg Lonnon 2001 + * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 + * are different. + */ + +#ifndef __ASM_ARCH_OMAP1510_IRQS_H +#define __ASM_ARCH_OMAP1510_IRQS_H + +/* + * IRQ numbers for interrupt handler 1 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + * + */ +#define INT_IH2_IRQ 0 +#define INT_CAMERA 1 +#define INT_FIQ 3 +#define INT_RTDX 6 +#define INT_DSP_MMU_ABORT 7 +#define INT_HOST 8 +#define INT_ABORT 9 +#define INT_DSP_MAILBOX1 10 +#define INT_DSP_MAILBOX2 11 +#define INT_BRIDGE_PRIV 13 +#define INT_GPIO_BANK1 14 +#define INT_UART3 15 +#define INT_TIMER3 16 +#define INT_DMA_CH0_6 19 +#define INT_DMA_CH1_7 20 +#define INT_DMA_CH2_8 21 +#define INT_DMA_CH3 22 +#define INT_DMA_CH4 23 +#define INT_DMA_CH5 24 +#define INT_DMA_LCD 25 +#define INT_TIMER1 26 +#define INT_WD_TIMER 27 +#define INT_BRIDGE_PUB 28 +#define INT_TIMER2 30 +#define INT_LCD_CTRL 31 + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1510_RES2 2 +#define INT_1510_SPI_TX 4 +#define INT_1510_SPI_RX 5 +#define INT_1510_RES12 12 +#define INT_1510_LB_MMU 17 +#define INT_1510_RES18 18 +#define INT_1510_LOCAL_BUS 29 + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 1 + */ +#define INT_1610_IH2_FIQ 2 +#define INT_1610_McBSP2_TX 4 +#define INT_1610_McBSP2_RX 5 +#define INT_1610_LCD_LINE 12 +#define INT_1610_GPTIMER1 17 +#define INT_1610_GPTIMER2 18 +#define INT_1610_SSR_FIFO_0 29 + +/* + * OMAP-730 specific IRQ numbers for interrupt handler 1 + */ +#define INT_730_IH2_FIQ 0 +#define INT_730_IH2_IRQ 1 +#define INT_730_USB_NON_ISO 2 +#define INT_730_USB_ISO 3 +#define INT_730_ICR 4 +#define INT_730_EAC 5 +#define INT_730_GPIO_BANK1 6 +#define INT_730_GPIO_BANK2 7 +#define INT_730_GPIO_BANK3 8 +#define INT_730_McBSP2TX 10 +#define INT_730_McBSP2RX 11 +#define INT_730_McBSP2RX_OVF 12 +#define INT_730_LCD_LINE 14 +#define INT_730_GSM_PROTECT 15 +#define INT_730_TIMER3 16 +#define INT_730_GPIO_BANK5 17 +#define INT_730_GPIO_BANK6 18 +#define INT_730_SPGIO_WR 29 + +/* + * IRQ numbers for interrupt handler 2 + * + * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below + */ +#define IH2_BASE 32 + +#define INT_KEYBOARD (1 + IH2_BASE) +#define INT_uWireTX (2 + IH2_BASE) +#define INT_uWireRX (3 + IH2_BASE) +#define INT_I2C (4 + IH2_BASE) +#define INT_MPUIO (5 + IH2_BASE) +#define INT_USB_HHC_1 (6 + IH2_BASE) +#define INT_McBSP3TX (10 + IH2_BASE) +#define INT_McBSP3RX (11 + IH2_BASE) +#define INT_McBSP1TX (12 + IH2_BASE) +#define INT_McBSP1RX (13 + IH2_BASE) +#define INT_UART1 (14 + IH2_BASE) +#define INT_UART2 (15 + IH2_BASE) +#define INT_BT_MCSI1TX (16 + IH2_BASE) +#define INT_BT_MCSI1RX (17 + IH2_BASE) +#define INT_USB_W2FC (20 + IH2_BASE) +#define INT_1WIRE (21 + IH2_BASE) +#define INT_OS_TIMER (22 + IH2_BASE) +#define INT_MMC (23 + IH2_BASE) +#define INT_GAUGE_32K (24 + IH2_BASE) +#define INT_RTC_TIMER (25 + IH2_BASE) +#define INT_RTC_ALARM (26 + IH2_BASE) +#define INT_MEM_STICK (27 + IH2_BASE) +#define INT_DSP_MMU (28 + IH2_BASE) + +/* + * OMAP-1510 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1510_OS_32kHz_TIMER (22 + IH2_BASE) +#define INT_1510_COM_SPI_RO (31 + IH2_BASE) + +/* + * OMAP-1610 specific IRQ numbers for interrupt handler 2 + */ +#define INT_1610_FAC (0 + IH2_BASE) +#define INT_1610_USB_HHC_2 (7 + IH2_BASE) +#define INT_1610_USB_OTG (8 + IH2_BASE) +#define INT_1610_SoSSI (9 + IH2_BASE) +#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) +#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) +#define INT_1610_STI (32 + IH2_BASE) +#define INT_1610_STI_WAKEUP (33 + IH2_BASE) +#define INT_1610_GPTIMER3 (34 + IH2_BASE) +#define INT_1610_GPTIMER4 (35 + IH2_BASE) +#define INT_1610_GPTIMER5 (36 + IH2_BASE) +#define INT_1610_GPTIMER6 (37 + IH2_BASE) +#define INT_1610_GPTIMER7 (38 + IH2_BASE) +#define INT_1610_GPTIMER8 (39 + IH2_BASE) +#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) +#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) +#define INT_1610_MMC2 (42 + IH2_BASE) +#define INT_1610_CF (43 + IH2_BASE) +#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) +#define INT_1610_SPI (49 + IH2_BASE) +#define INT_1610_DMA_CH6 (53 + IH2_BASE) +#define INT_1610_DMA_CH7 (54 + IH2_BASE) +#define INT_1610_DMA_CH8 (55 + IH2_BASE) +#define INT_1610_DMA_CH9 (56 + IH2_BASE) +#define INT_1610_DMA_CH10 (57 + IH2_BASE) +#define INT_1610_DMA_CH11 (58 + IH2_BASE) +#define INT_1610_DMA_CH12 (59 + IH2_BASE) +#define INT_1610_DMA_CH13 (60 + IH2_BASE) +#define INT_1610_DMA_CH14 (61 + IH2_BASE) +#define INT_1610_DMA_CH15 (62 + IH2_BASE) +#define INT_1610_NAND (63 + IH2_BASE) + +/* + * OMAP-730 specific IRQ numbers for interrupt handler 2 + */ +#define INT_730_HW_ERRORS (0 + IH2_BASE) +#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_730_CFCD (2 + IH2_BASE) +#define INT_730_CFIREQ (3 + IH2_BASE) +#define INT_730_I2C (4 + IH2_BASE) +#define INT_730_PCC (5 + IH2_BASE) +#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_730_SPI_100K_1 (7 + IH2_BASE) +#define INT_730_SYREN_SPI (8 + IH2_BASE) +#define INT_730_VLYNQ (9 + IH2_BASE) +#define INT_730_GPIO_BANK4 (10 + IH2_BASE) +#define INT_730_McBSP1TX (11 + IH2_BASE) +#define INT_730_McBSP1RX (12 + IH2_BASE) +#define INT_730_McBSP1RX_OF (13 + IH2_BASE) +#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_730_UART_MODEM_1 (15 + IH2_BASE) +#define INT_730_MCSI (16 + IH2_BASE) +#define INT_730_uWireTX (17 + IH2_BASE) +#define INT_730_uWireRX (18 + IH2_BASE) +#define INT_730_SMC_CD (19 + IH2_BASE) +#define INT_730_SMC_IREQ (20 + IH2_BASE) +#define INT_730_HDQ_1WIRE (21 + IH2_BASE) +#define INT_730_TIMER32K (22 + IH2_BASE) +#define INT_730_MMC_SDIO (23 + IH2_BASE) +#define INT_730_UPLD (24 + IH2_BASE) +#define INT_730_USB_HHC_1 (27 + IH2_BASE) +#define INT_730_USB_HHC_2 (28 + IH2_BASE) +#define INT_730_USB_GENI (29 + IH2_BASE) +#define INT_730_USB_OTG (30 + IH2_BASE) +#define INT_730_CAMERA_IF (31 + IH2_BASE) +#define INT_730_RNG (32 + IH2_BASE) +#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_730_DBB_RF_EN (34 + IH2_BASE) +#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_730_SHA1_MD5 (36 + IH2_BASE) +#define INT_730_SPI_100K_2 (37 + IH2_BASE) +#define INT_730_RNG_IDLE (38 + IH2_BASE) +#define INT_730_MPUIO (39 + IH2_BASE) +#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_730_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_730_LLPC_VSYNC (43 + IH2_BASE) +#define INT_730_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_730_DMA_CH6 (53 + IH2_BASE) +#define INT_730_DMA_CH7 (54 + IH2_BASE) +#define INT_730_DMA_CH8 (55 + IH2_BASE) +#define INT_730_DMA_CH9 (56 + IH2_BASE) +#define INT_730_DMA_CH10 (57 + IH2_BASE) +#define INT_730_DMA_CH11 (58 + IH2_BASE) +#define INT_730_DMA_CH12 (59 + IH2_BASE) +#define INT_730_DMA_CH13 (60 + IH2_BASE) +#define INT_730_DMA_CH14 (61 + IH2_BASE) +#define INT_730_DMA_CH15 (62 + IH2_BASE) +#define INT_730_NAND (63 + IH2_BASE) + +/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and + * 16 MPUIO lines */ +#define OMAP_MAX_GPIO_LINES 192 +#define IH_GPIO_BASE (128 + IH2_BASE) +#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) +#define IH_BOARD_BASE (16 + IH_MPUIO_BASE) + +#ifndef __ASSEMBLY__ +extern void omap_init_irq(void); +#endif + +/* + * The definition of NR_IRQS is in board-specific header file, which is + * included via hardware.h + */ +#include <asm/arch/hardware.h> + +#ifndef NR_IRQS +#define NR_IRQS IH_BOARD_BASE +#endif + +#endif diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h new file mode 100644 index 00000000000..305bdeb16ab --- /dev/null +++ b/include/asm-arm/arch-omap/mcbsp.h @@ -0,0 +1,257 @@ +/* + * linux/include/asm-arm/arch-omap/gpio.h + * + * Defines for Multi-Channel Buffered Serial Port + * + * Copyright (C) 2002 RidgeRun, Inc. + * Author: Steve Johnson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_OMAP_MCBSP_H +#define __ASM_ARCH_OMAP_MCBSP_H + +#include <asm/arch/hardware.h> + +#define OMAP730_MCBSP1_BASE 0xfffb1000 +#define OMAP730_MCBSP2_BASE 0xfffb1800 + +#define OMAP1510_MCBSP1_BASE 0xe1011800 +#define OMAP1510_MCBSP2_BASE 0xfffb1000 +#define OMAP1510_MCBSP3_BASE 0xe1017000 + +#define OMAP1610_MCBSP1_BASE 0xe1011800 +#define OMAP1610_MCBSP2_BASE 0xfffb1000 +#define OMAP1610_MCBSP3_BASE 0xe1017000 + +#define OMAP_MCBSP_REG_DRR2 0x00 +#define OMAP_MCBSP_REG_DRR1 0x02 +#define OMAP_MCBSP_REG_DXR2 0x04 +#define OMAP_MCBSP_REG_DXR1 0x06 +#define OMAP_MCBSP_REG_SPCR2 0x08 +#define OMAP_MCBSP_REG_SPCR1 0x0a +#define OMAP_MCBSP_REG_RCR2 0x0c +#define OMAP_MCBSP_REG_RCR1 0x0e +#define OMAP_MCBSP_REG_XCR2 0x10 +#define OMAP_MCBSP_REG_XCR1 0x12 +#define OMAP_MCBSP_REG_SRGR2 0x14 +#define OMAP_MCBSP_REG_SRGR1 0x16 +#define OMAP_MCBSP_REG_MCR2 0x18 +#define OMAP_MCBSP_REG_MCR1 0x1a +#define OMAP_MCBSP_REG_RCERA 0x1c +#define OMAP_MCBSP_REG_RCERB 0x1e +#define OMAP_MCBSP_REG_XCERA 0x20 +#define OMAP_MCBSP_REG_XCERB 0x22 +#define OMAP_MCBSP_REG_PCR0 0x24 +#define OMAP_MCBSP_REG_RCERC 0x26 +#define OMAP_MCBSP_REG_RCERD 0x28 +#define OMAP_MCBSP_REG_XCERC 0x2A +#define OMAP_MCBSP_REG_XCERD 0x2C +#define OMAP_MCBSP_REG_RCERE 0x2E +#define OMAP_MCBSP_REG_RCERF 0x30 +#define OMAP_MCBSP_REG_XCERE 0x32 +#define OMAP_MCBSP_REG_XCERF 0x34 +#define OMAP_MCBSP_REG_RCERG 0x36 +#define OMAP_MCBSP_REG_RCERH 0x38 +#define OMAP_MCBSP_REG_XCERG 0x3A +#define OMAP_MCBSP_REG_XCERH 0x3C + +#define OMAP_MAX_MCBSP_COUNT 3 + +#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg) +#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg) + +/************************** McBSP SPCR1 bit definitions ***********************/ +#define RRST 0x0001 +#define RRDY 0x0002 +#define RFULL 0x0004 +#define RSYNC_ERR 0x0008 +#define RINTM(value) ((value)<<4) /* bits 4:5 */ +#define ABIS 0x0040 +#define DXENA 0x0080 +#define CLKSTP(value) ((value)<<11) /* bits 11:12 */ +#define RJUST(value) ((value)<<13) /* bits 13:14 */ +#define DLB 0x8000 + +/************************** McBSP SPCR2 bit definitions ***********************/ +#define XRST 0x0001 +#define XRDY 0x0002 +#define XEMPTY 0x0004 +#define XSYNC_ERR 0x0008 +#define XINTM(value) ((value)<<4) /* bits 4:5 */ +#define GRST 0x0040 +#define FRST 0x0080 +#define SOFT 0x0100 +#define FREE 0x0200 + +/************************** McBSP PCR bit definitions *************************/ +#define CLKRP 0x0001 +#define CLKXP 0x0002 +#define FSRP 0x0004 +#define FSXP 0x0008 +#define DR_STAT 0x0010 +#define DX_STAT 0x0020 +#define CLKS_STAT 0x0040 +#define SCLKME 0x0080 +#define CLKRM 0x0100 +#define CLKXM 0x0200 +#define FSRM 0x0400 +#define FSXM 0x0800 +#define RIOEN 0x1000 +#define XIOEN 0x2000 +#define IDLE_EN 0x4000 + +/************************** McBSP RCR1 bit definitions ************************/ +#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */ +#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */ + +/************************** McBSP XCR1 bit definitions ************************/ +#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */ +#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */ + +/*************************** McBSP RCR2 bit definitions ***********************/ +#define RDATDLY(value) (value) /* Bits 0:1 */ +#define RFIG 0x0004 +#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */ +#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */ +#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */ +#define RPHASE 0x8000 + +/*************************** McBSP XCR2 bit definitions ***********************/ +#define XDATDLY(value) (value) /* Bits 0:1 */ +#define XFIG 0x0004 +#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */ +#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */ +#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */ +#define XPHASE 0x8000 + +/************************* McBSP SRGR1 bit definitions ************************/ +#define CLKGDV(value) (value) /* Bits 0:7 */ +#define FWID(value) ((value)<<8) /* Bits 8:15 */ + +/************************* McBSP SRGR2 bit definitions ************************/ +#define FPER(value) (value) /* Bits 0:11 */ +#define FSGM 0x1000 +#define CLKSM 0x2000 +#define CLKSP 0x4000 +#define GSYNC 0x8000 + +/************************* McBSP MCR1 bit definitions *************************/ +#define RMCM 0x0001 +#define RCBLK(value) ((value)<<2) /* Bits 2:4 */ +#define RPABLK(value) ((value)<<5) /* Bits 5:6 */ +#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */ + +/************************* McBSP MCR2 bit definitions *************************/ +#define XMCM(value) (value) /* Bits 0:1 */ +#define XCBLK(value) ((value)<<2) /* Bits 2:4 */ +#define XPABLK(value) ((value)<<5) /* Bits 5:6 */ +#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ + + +/* we don't do multichannel for now */ +struct omap_mcbsp_reg_cfg { + u16 spcr2; + u16 spcr1; + u16 rcr2; + u16 rcr1; + u16 xcr2; + u16 xcr1; + u16 srgr2; + u16 srgr1; + u16 mcr2; + u16 mcr1; + u16 pcr0; + u16 rcerc; + u16 rcerd; + u16 xcerc; + u16 xcerd; + u16 rcere; + u16 rcerf; + u16 xcere; + u16 xcerf; + u16 rcerg; + u16 rcerh; + u16 xcerg; + u16 xcerh; +}; + +typedef enum { + OMAP_MCBSP1 = 0, + OMAP_MCBSP2, + OMAP_MCBSP3, +} omap_mcbsp_id; + +typedef enum { + OMAP_MCBSP_WORD_8 = 0, + OMAP_MCBSP_WORD_12, + OMAP_MCBSP_WORD_16, + OMAP_MCBSP_WORD_20, + OMAP_MCBSP_WORD_24, + OMAP_MCBSP_WORD_32, +} omap_mcbsp_word_length; + +typedef enum { + OMAP_MCBSP_CLK_RISING = 0, + OMAP_MCBSP_CLK_FALLING, +} omap_mcbsp_clk_polarity; + +typedef enum { + OMAP_MCBSP_FS_ACTIVE_HIGH = 0, + OMAP_MCBSP_FS_ACTIVE_LOW, +} omap_mcbsp_fs_polarity; + +typedef enum { + OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, + OMAP_MCBSP_CLK_STP_MODE_DELAY, +} omap_mcbsp_clk_stp_mode; + + +/******* SPI specific mode **********/ +typedef enum { + OMAP_MCBSP_SPI_MASTER = 0, + OMAP_MCBSP_SPI_SLAVE, +} omap_mcbsp_spi_mode; + +struct omap_mcbsp_spi_cfg { + omap_mcbsp_spi_mode spi_mode; + omap_mcbsp_clk_polarity rx_clock_polarity; + omap_mcbsp_clk_polarity tx_clock_polarity; + omap_mcbsp_fs_polarity fsx_polarity; + u8 clk_div; + omap_mcbsp_clk_stp_mode clk_stp_mode; + omap_mcbsp_word_length word_length; +}; + +void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); +int omap_mcbsp_request(unsigned int id); +void omap_mcbsp_free(unsigned int id); +void omap_mcbsp_start(unsigned int id); +void omap_mcbsp_stop(unsigned int id); +void omap_mcbsp_xmit_word(unsigned int id, u32 word); +u32 omap_mcbsp_recv_word(unsigned int id); + +int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); +int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); + +/* SPI specific API */ +void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); + +/* Polled read/write functions */ +int omap_mcbsp_pollread(unsigned int id, u16 * buf); +int omap_mcbsp_pollwrite(unsigned int id, u16 buf); + +#endif diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h new file mode 100644 index 00000000000..f6b57dd846a --- /dev/null +++ b/include/asm-arm/arch-omap/memory.h @@ -0,0 +1,87 @@ +/* + * linux/include/asm-arm/arch-omap/memory.h + * + * Memory map for OMAP-1510 and 1610 + * + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * This file was derived from linux/include/asm-arm/arch-intergrator/memory.h + * Copyright (C) 1999 ARM Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET (0x10000000UL) + +/* + * OMAP-1510 Local Bus address offset + */ +#define OMAP1510_LB_OFFSET (0x30000000UL) + +/* + * Conversion between SDRAM and fake PCI bus, used by USB + * NOTE: Physical address must be converted to Local Bus address + * on OMAP-1510 only + */ + +/* + * Bus address is physical address, except for OMAP-1510 Local Bus. + */ +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +/* + * OMAP-1510 bus address is translated into a Local Bus address if the + * OMAP bus type is lbus. We do the address translation based on the + * device overriding the defaults used in the dma-mapping API. + * Note that the is_lbus_device() test is not very efficient on 1510 + * because of the strncmp(). + */ +#ifdef CONFIG_ARCH_OMAP1510 + +#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) +#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) +#define is_lbus_device(dev) (cpu_is_omap1510() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0)) + +#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \ + (dma_addr_t)virt_to_lbus(page_address(page)) : \ + (dma_addr_t)__virt_to_bus(page_address(page));}) + +#define __arch_dma_to_virt(dev, addr) ({is_lbus_device(dev) ? \ + lbus_to_virt(addr) : \ + __bus_to_virt(addr);}) + +#define __arch_virt_to_dma(dev, addr) ({is_lbus_device(dev) ? \ + virt_to_lbus(addr) : \ + __virt_to_bus(addr);}) + +#endif /* CONFIG_ARCH_OMAP1510 */ + +#define PHYS_TO_NID(addr) (0) +#endif + diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h new file mode 100644 index 00000000000..39f99decbb7 --- /dev/null +++ b/include/asm-arm/arch-omap/mux.h @@ -0,0 +1,561 @@ +/* + * linux/include/asm-arm/arch-omap/mux.h + * + * Table of the Omap register configurations for the FUNC_MUX and + * PULL_DWN combinations. + * + * Copyright (C) 2003 Nokia Corporation + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * NOTE: Please use the following naming style for new pin entries. + * For example, W8_1610_MMC2_DAT0, where: + * - W8 = ball + * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 + * - MMC2_DAT0 = function + * + * Change log: + * Added entry for the I2C interface. (02Feb 2004) + * Copyright (C) 2004 Texas Instruments + * + * Added entry for the keypad and uwire CS1. (09Mar 2004) + * Copyright (C) 2004 Texas Instruments + * + */ + +#ifndef __ASM_ARCH_MUX_H +#define __ASM_ARCH_MUX_H + +#define PU_PD_SEL_NA 0 /* No pu_pd reg available */ +#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ + +#ifdef CONFIG_OMAP_MUX_DEBUG +#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ + .mux_reg = FUNC_MUX_CTRL_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ + .pull_reg = PULL_DWN_CTRL_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ + .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +#else + +#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ + .mask_offset = mode_offset, \ + .mask = mode, + +#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ + .pull_bit = bit, \ + .pull_val = status, + +#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ + .pu_pd_val = status, + +#endif /* CONFIG_OMAP_MUX_DEBUG */ + +#define MUX_CFG(desc, mux_reg, mode_offset, mode, \ + pull_reg, pull_bit, pull_status, \ + pu_pd_reg, pu_pd_status, debug_status) \ +{ \ + .name = desc, \ + .debug = debug_status, \ + MUX_REG(mux_reg, mode_offset, mode) \ + PULL_REG(pull_reg, pull_bit, pull_status) \ + PU_PD_REG(pu_pd_reg, pu_pd_status) \ +}, + +#define PULL_DISABLED 0 +#define PULL_ENABLED 1 + +#define PULL_DOWN 0 +#define PULL_UP 1 + +typedef struct { + char *name; + unsigned char busy; + unsigned char debug; + + const char *mux_reg_name; + const unsigned int mux_reg; + const unsigned char mask_offset; + const unsigned char mask; + + const char *pull_name; + const unsigned int pull_reg; + const unsigned char pull_val; + const unsigned char pull_bit; + + const char *pu_pd_name; + const unsigned int pu_pd_reg; + const unsigned char pu_pd_val; +} reg_cfg_set; + +/* + * Lookup table for FUNC_MUX and PULL_DWN register combinations for each + * device. See also reg_cfg_table below for the register values. + */ +typedef enum { + /* UART1 (BT_UART_GATING)*/ + UART1_TX = 0, + UART1_RTS, + + /* UART2 (COM_UART_GATING)*/ + UART2_TX, + UART2_RX, + UART2_CTS, + UART2_RTS, + + /* UART3 (GIGA_UART_GATING) */ + UART3_TX, + UART3_RX, + UART3_CTS, + UART3_RTS, + UART3_CLKREQ, + UART3_BCLK, /* 12MHz clock out */ + Y15_1610_UART3_RTS, + + /* PWT & PWL */ + PWT, + PWL, + + /* USB master generic */ + R18_USB_VBUS, + R18_1510_USB_GPIO0, + W4_USB_PUEN, + W4_USB_CLKO, + W4_USB_HIGHZ, + W4_GPIO58, + + /* USB1 master */ + USB1_SUSP, + USB1_SEO, + W13_1610_USB1_SE0, + USB1_TXEN, + USB1_TXD, + USB1_VP, + USB1_VM, + USB1_RCV, + USB1_SPEED, + R13_1610_USB1_SPEED, + R13_1710_USB1_SE0, + + /* USB2 master */ + USB2_SUSP, + USB2_VP, + USB2_TXEN, + USB2_VM, + USB2_RCV, + USB2_SEO, + USB2_TXD, + + /* OMAP-1510 GPIO */ + R18_1510_GPIO0, + R19_1510_GPIO1, + M14_1510_GPIO2, + + /* OMAP1610 GPIO */ + P18_1610_GPIO3, + Y15_1610_GPIO17, + + /* OMAP-1710 GPIO */ + R18_1710_GPIO0, + V2_1710_GPIO10, + N21_1710_GPIO14, + W15_1710_GPIO40, + + /* MPUIO */ + MPUIO2, + MPUIO4, + MPUIO5, + T20_1610_MPUIO5, + W11_1610_MPUIO6, + V10_1610_MPUIO7, + W11_1610_MPUIO9, + V10_1610_MPUIO10, + W10_1610_MPUIO11, + E20_1610_MPUIO13, + U20_1610_MPUIO14, + E19_1610_MPUIO15, + + /* MCBSP2 */ + MCBSP2_CLKR, + MCBSP2_CLKX, + MCBSP2_DR, + MCBSP2_DX, + MCBSP2_FSR, + MCBSP2_FSX, + + /* MCBSP3 */ + MCBSP3_CLKX, + + /* Misc ballouts */ + BALLOUT_V8_ARMIO3, + + /* OMAP-1610 MMC2 */ + W8_1610_MMC2_DAT0, + V8_1610_MMC2_DAT1, + W15_1610_MMC2_DAT2, + R10_1610_MMC2_DAT3, + Y10_1610_MMC2_CLK, + Y8_1610_MMC2_CMD, + V9_1610_MMC2_CMDDIR, + V5_1610_MMC2_DATDIR0, + W19_1610_MMC2_DATDIR1, + R18_1610_MMC2_CLKIN, + + /* OMAP-1610 External Trace Interface */ + M19_1610_ETM_PSTAT0, + L15_1610_ETM_PSTAT1, + L18_1610_ETM_PSTAT2, + L19_1610_ETM_D0, + J19_1610_ETM_D6, + J18_1610_ETM_D7, + + /* OMAP-1610 GPIO */ + P20_1610_GPIO4, + V9_1610_GPIO7, + W8_1610_GPIO9, + N19_1610_GPIO13, + P10_1610_GPIO22, + V5_1610_GPIO24, + AA20_1610_GPIO_41, + W19_1610_GPIO48, + M7_1610_GPIO62, + + /* OMAP-1610 uWire */ + V19_1610_UWIRE_SCLK, + U18_1610_UWIRE_SDI, + W21_1610_UWIRE_SDO, + N14_1610_UWIRE_CS0, + P15_1610_UWIRE_CS0, + N15_1610_UWIRE_CS1, + + /* OMAP-1610 Flash */ + L3_1610_FLASH_CS2B_OE, + M8_1610_FLASH_CS2B_WE, + + /* First MMC */ + MMC_CMD, + MMC_DAT1, + MMC_DAT2, + MMC_DAT0, + MMC_CLK, + MMC_DAT3, + + /* OMAP-1710 MMC CMDDIR and DATDIR0 */ + M15_1710_MMC_CLKI, + P19_1710_MMC_CMDDIR, + P20_1710_MMC_DATDIR0, + + /* OMAP-1610 USB0 alternate pin configuration */ + W9_USB0_TXEN, + AA9_USB0_VP, + Y5_USB0_RCV, + R9_USB0_VM, + V6_USB0_TXD, + W5_USB0_SE0, + V9_USB0_SPEED, + V9_USB0_SUSP, + + /* USB2 */ + W9_USB2_TXEN, + AA9_USB2_VP, + Y5_USB2_RCV, + R9_USB2_VM, + V6_USB2_TXD, + W5_USB2_SE0, + + /* UART1 1610 */ + + R13_1610_UART1_TX, + V14_1610_UART1_RX, + R14_1610_UART1_CTS, + AA15_1610_UART1_RTS, + + /* I2C OMAP-1610 */ + I2C_SCL, + I2C_SDA, + + /* Keypad */ + F18_1610_KBC0, + D20_1610_KBC1, + D19_1610_KBC2, + E18_1610_KBC3, + C21_1610_KBC4, + G18_1610_KBR0, + F19_1610_KBR1, + H14_1610_KBR2, + E20_1610_KBR3, + E19_1610_KBR4, + N19_1610_KBR5, + + /* Power management */ + T20_1610_LOW_PWR, + + /* MCLK Settings */ + V5_1710_MCLK_ON, + V5_1710_MCLK_OFF, + R10_1610_MCLK_ON, + R10_1610_MCLK_OFF, + + /* CompactFlash controller */ + P11_1610_CF_CD2, + R11_1610_CF_IOIS16, + V10_1610_CF_IREQ, + W10_1610_CF_RESET, + W11_1610_CF_CD1, +} reg_cfg_t; + +#if defined(__MUX_C__) && defined(CONFIG_OMAP_MUX) + +/* + * Table of various FUNC_MUX and PULL_DWN combinations for each device. + * See also reg_cfg_t above for the lookup table. + */ +static reg_cfg_set __initdata_or_module +reg_cfg_table[] = { +/* + * description mux mode mux pull pull pull pu_pd pu dbg + * reg offset mode reg bit ena reg + */ +MUX_CFG("UART1_TX", 9, 21, 1, 2, 3, 0, NA, 0, 0) +MUX_CFG("UART1_RTS", 9, 12, 1, 2, 0, 0, NA, 0, 0) + +/* UART2 (COM_UART_GATING), conflicts with USB2 */ +MUX_CFG("UART2_TX", C, 27, 1, 3, 3, 0, NA, 0, 0) +MUX_CFG("UART2_RX", C, 18, 0, 3, 1, 1, NA, 0, 0) +MUX_CFG("UART2_CTS", C, 21, 0, 3, 1, 1, NA, 0, 0) +MUX_CFG("UART2_RTS", C, 24, 1, 3, 2, 0, NA, 0, 0) + +/* UART3 (GIGA_UART_GATING) */ +MUX_CFG("UART3_TX", 6, 0, 1, 0, 30, 0, NA, 0, 0) +MUX_CFG("UART3_RX", 6, 3, 0, 0, 31, 1, NA, 0, 0) +MUX_CFG("UART3_CTS", 5, 12, 2, 0, 24, 0, NA, 0, 0) +MUX_CFG("UART3_RTS", 5, 15, 2, 0, 25, 0, NA, 0, 0) +MUX_CFG("UART3_CLKREQ", 9, 27, 0, 2, 5, 0, NA, 0, 0) +MUX_CFG("UART3_BCLK", A, 0, 0, 2, 6, 0, NA, 0, 0) +MUX_CFG("Y15_1610_UART3_RTS", A, 0, 1, 2, 6, 0, NA, 0, 0) + +/* PWT & PWL, conflicts with UART3 */ +MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0) +MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0) + +/* USB internal master generic */ +MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1) +MUX_CFG("R18_1510_USB_GPIO0", 7, 9, 0, 1, 11, 1, NA, 0, 1) +/* works around erratum: W4_USB_PUEN and W4_USB_PUDIS are switched! */ +MUX_CFG("W4_USB_PUEN", D, 3, 3, 3, 5, 1, NA, 0, 1) +MUX_CFG("W4_USB_CLKO", D, 3, 1, 3, 5, 0, NA, 0, 1) +MUX_CFG("W4_USB_HIGHZ", D, 3, 4, 3, 5, 0, 3, 0, 1) +MUX_CFG("W4_GPIO58", D, 3, 7, 3, 5, 0, 3, 0, 1) + +/* USB1 master */ +MUX_CFG("USB1_SUSP", 8, 27, 2, 1, 27, 0, NA, 0, 1) +MUX_CFG("USB1_SE0", 9, 0, 2, 1, 28, 0, NA, 0, 1) +MUX_CFG("W13_1610_USB1_SE0", 9, 0, 4, 1, 28, 0, NA, 0, 1) +MUX_CFG("USB1_TXEN", 9, 3, 2, 1, 29, 0, NA, 0, 1) +MUX_CFG("USB1_TXD", 9, 24, 1, 2, 4, 0, NA, 0, 1) +MUX_CFG("USB1_VP", A, 3, 1, 2, 7, 0, NA, 0, 1) +MUX_CFG("USB1_VM", A, 6, 1, 2, 8, 0, NA, 0, 1) +MUX_CFG("USB1_RCV", A, 9, 1, 2, 9, 0, NA, 0, 1) +MUX_CFG("USB1_SPEED", A, 12, 2, 2, 10, 0, NA, 0, 1) +MUX_CFG("R13_1610_USB1_SPEED", A, 12, 5, 2, 10, 0, NA, 0, 1) +MUX_CFG("R13_1710_USB1_SEO", A, 12, 5, 2, 10, 0, NA, 0, 1) + +/* USB2 master */ +MUX_CFG("USB2_SUSP", B, 3, 1, 2, 17, 0, NA, 0, 1) +MUX_CFG("USB2_VP", B, 6, 1, 2, 18, 0, NA, 0, 1) +MUX_CFG("USB2_TXEN", B, 9, 1, 2, 19, 0, NA, 0, 1) +MUX_CFG("USB2_VM", C, 18, 1, 3, 0, 0, NA, 0, 1) +MUX_CFG("USB2_RCV", C, 21, 1, 3, 1, 0, NA, 0, 1) +MUX_CFG("USB2_SE0", C, 24, 2, 3, 2, 0, NA, 0, 1) +MUX_CFG("USB2_TXD", C, 27, 2, 3, 3, 0, NA, 0, 1) + +/* OMAP-1510 GPIO */ +MUX_CFG("R18_1510_GPIO0", 7, 9, 0, 1, 11, 1, 0, 0, 1) +MUX_CFG("R19_1510_GPIO1", 7, 6, 0, 1, 10, 1, 0, 0, 1) +MUX_CFG("M14_1510_GPIO2", 7, 3, 0, 1, 9, 1, 0, 0, 1) + +/* OMAP1610 GPIO */ +MUX_CFG("P18_1610_GPIO3", 7, 0, 0, 1, 8, 0, NA, 0, 1) +MUX_CFG("Y15_1610_GPIO17", A, 0, 7, 2, 6, 0, NA, 0, 1) + +/* OMAP-1710 GPIO */ +MUX_CFG("R18_1710_GPIO0", 7, 9, 0, 1, 11, 1, 1, 1, 1) +MUX_CFG("V2_1710_GPIO10", F, 27, 1, 4, 3, 1, 4, 1, 1) +MUX_CFG("N21_1710_GPIO14", 6, 9, 0, 1, 1, 1, 1, 1, 1) +MUX_CFG("W15_1710_GPIO40", 9, 27, 7, 2, 5, 1, 2, 1, 1) + +/* MPUIO */ +MUX_CFG("MPUIO2", 7, 18, 0, 1, 1, 1, NA, 0, 1) +MUX_CFG("MPUIO4", 7, 15, 0, 1, 13, 1, NA, 0, 1) +MUX_CFG("MPUIO5", 7, 12, 0, 1, 12, 1, NA, 0, 1) + +MUX_CFG("T20_1610_MPUIO5", 7, 12, 0, 1, 12, 0, 3, 0, 1) +MUX_CFG("W11_1610_MPUIO6", 10, 15, 2, 3, 8, 0, 3, 0, 1) +MUX_CFG("V10_1610_MPUIO7", A, 24, 2, 2, 14, 0, 2, 0, 1) +MUX_CFG("W11_1610_MPUIO9", 10, 15, 1, 3, 8, 0, 3, 0, 1) +MUX_CFG("V10_1610_MPUIO10", A, 24, 1, 2, 14, 0, 2, 0, 1) +MUX_CFG("W10_1610_MPUIO11", A, 18, 2, 2, 11, 0, 2, 0, 1) +MUX_CFG("E20_1610_MPUIO13", 3, 21, 1, 0, 7, 0, 0, 0, 1) +MUX_CFG("U20_1610_MPUIO14", 9, 6, 6, 0, 30, 0, 0, 0, 1) +MUX_CFG("E19_1610_MPUIO15", 3, 18, 1, 0, 6, 0, 0, 0, 1) + +/* MCBSP2 */ +MUX_CFG("MCBSP2_CLKR", C, 6, 0, 2, 27, 1, NA, 0, 1) +MUX_CFG("MCBSP2_CLKX", C, 9, 0, 2, 29, 1, NA, 0, 1) +MUX_CFG("MCBSP2_DR", C, 0, 0, 2, 26, 1, NA, 0, 1) +MUX_CFG("MCBSP2_DX", C, 15, 0, 2, 31, 1, NA, 0, 1) +MUX_CFG("MCBSP2_FSR", C, 12, 0, 2, 30, 1, NA, 0, 1) +MUX_CFG("MCBSP2_FSX", C, 3, 0, 2, 27, 1, NA, 0, 1) + +/* MCBSP3 NOTE: Mode must 1 for clock */ +MUX_CFG("MCBSP3_CLKX", 9, 3, 1, 1, 29, 0, NA, 0, 1) + +/* Misc ballouts */ +MUX_CFG("BALLOUT_V8_ARMIO3", B, 18, 0, 2, 25, 1, NA, 0, 1) + +/* OMAP-1610 MMC2 */ +MUX_CFG("W8_1610_MMC2_DAT0", B, 21, 6, 2, 23, 1, 2, 1, 1) +MUX_CFG("V8_1610_MMC2_DAT1", B, 27, 6, 2, 25, 1, 2, 1, 1) +MUX_CFG("W15_1610_MMC2_DAT2", 9, 12, 6, 2, 5, 1, 2, 1, 1) +MUX_CFG("R10_1610_MMC2_DAT3", B, 18, 6, 2, 22, 1, 2, 1, 1) +MUX_CFG("Y10_1610_MMC2_CLK", B, 3, 6, 2, 17, 0, 2, 0, 1) +MUX_CFG("Y8_1610_MMC2_CMD", B, 24, 6, 2, 24, 1, 2, 1, 1) +MUX_CFG("V9_1610_MMC2_CMDDIR", B, 12, 6, 2, 20, 0, 2, 1, 1) +MUX_CFG("V5_1610_MMC2_DATDIR0", B, 15, 6, 2, 21, 0, 2, 1, 1) +MUX_CFG("W19_1610_MMC2_DATDIR1", 8, 15, 6, 1, 23, 0, 1, 1, 1) +MUX_CFG("R18_1610_MMC2_CLKIN", 7, 9, 6, 1, 11, 0, 1, 11, 1) + +/* OMAP-1610 External Trace Interface */ +MUX_CFG("M19_1610_ETM_PSTAT0", 5, 27, 1, 0, 29, 0, 0, 0, 1) +MUX_CFG("L15_1610_ETM_PSTAT1", 5, 24, 1, 0, 28, 0, 0, 0, 1) +MUX_CFG("L18_1610_ETM_PSTAT2", 5, 21, 1, 0, 27, 0, 0, 0, 1) +MUX_CFG("L19_1610_ETM_D0", 5, 18, 1, 0, 26, 0, 0, 0, 1) +MUX_CFG("J19_1610_ETM_D6", 5, 0, 1, 0, 20, 0, 0, 0, 1) +MUX_CFG("J18_1610_ETM_D7", 5, 27, 1, 0, 19, 0, 0, 0, 1) + +/* OMAP-1610 GPIO */ +MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1) +MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1) +MUX_CFG("W8_1610_GPIO9", B, 21, 0, 2, 23, 0, 2, 1, 1) +MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1) +MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1) +MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1) +MUX_CFG("AA20_1610_GPIO_41", 9, 9, 7, 1, 31, 0, 1, 1, 1) +MUX_CFG("W19_1610_GPIO48", 8, 15, 7, 1, 23, 1, 1, 0, 1) +MUX_CFG("M7_1610_GPIO62", 10, 0, 0, 4, 24, 0, 4, 0, 1) + +/* OMAP-1610 uWire */ +MUX_CFG("V19_1610_UWIRE_SCLK", 8, 6, 0, 1, 20, 0, 1, 1, 1) +MUX_CFG("U18_1610_UWIRE_SDI", 8, 0, 0, 1, 18, 0, 1, 1, 1) +MUX_CFG("W21_1610_UWIRE_SDO", 8, 3, 0, 1, 19, 0, 1, 1, 1) +MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1) +MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1) +MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1) + +/* OMAP-1610 Flash */ +MUX_CFG("L3_1610_FLASH_CS2B_OE",10, 6, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("M8_1610_FLASH_CS2B_WE",10, 3, 1, NA, 0, 0, NA, 0, 1) + +/* First MMC interface, same on 1510, 1610 and 1710 */ +MUX_CFG("MMC_CMD", A, 27, 0, 2, 15, 1, 2, 1, 1) +MUX_CFG("MMC_DAT1", A, 24, 0, 2, 14, 1, 2, 1, 1) +MUX_CFG("MMC_DAT2", A, 18, 0, 2, 12, 1, 2, 1, 1) +MUX_CFG("MMC_DAT0", B, 0, 0, 2, 16, 1, 2, 1, 1) +MUX_CFG("MMC_CLK", A, 21, 0, NA, 0, 0, NA, 0, 1) +MUX_CFG("MMC_DAT3", 10, 15, 0, 3, 8, 1, 3, 1, 1) +MUX_CFG("M15_1710_MMC_CLKI", 6, 21, 2, 0, 0, 0, NA, 0, 1) +MUX_CFG("P19_1710_MMC_CMDDIR", 6, 24, 6, 0, 0, 0, NA, 0, 1) +MUX_CFG("P20_1710_MMC_DATDIR0", 6, 27, 5, 0, 0, 0, NA, 0, 1) + +/* OMAP-1610 USB0 alternate configuration */ +MUX_CFG("W9_USB0_TXEN", B, 9, 5, 2, 19, 0, 2, 0, 1) +MUX_CFG("AA9_USB0_VP", B, 6, 5, 2, 18, 0, 2, 0, 1) +MUX_CFG("Y5_USB0_RCV", C, 21, 5, 3, 1, 0, 1, 0, 1) +MUX_CFG("R9_USB0_VM", C, 18, 5, 3, 0, 0, 3, 0, 1) +MUX_CFG("V6_USB0_TXD", C, 27, 5, 3, 3, 0, 3, 0, 1) +MUX_CFG("W5_USB0_SE0", C, 24, 5, 3, 2, 0, 3, 0, 1) +MUX_CFG("V9_USB0_SPEED", B, 12, 5, 2, 20, 0, 2, 0, 1) +MUX_CFG("Y10_USB0_SUSP", B, 3, 5, 2, 17, 0, 2, 0, 1) + +/* USB2 interface */ +MUX_CFG("W9_USB2_TXEN", B, 9, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("AA9_USB2_VP", B, 6, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("Y5_USB2_RCV", C, 21, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("R8_USB2_VM", C, 18, 1, NA, 0, 0, NA, 0, 1) +MUX_CFG("V6_USB2_TXD", C, 27, 2, NA, 0, 0, NA, 0, 1) +MUX_CFG("W5_USB2_SE0", C, 24, 2, NA, 0, 0, NA, 0, 1) + + +/* UART1 */ +MUX_CFG("R13_1610_UART1_TX", A, 12, 6, 2, 10, 0, 2, 10, 1) +MUX_CFG("V14_1610_UART1_RX", 9, 18, 0, 2, 2, 0, 2, 2, 1) +MUX_CFG("R14_1610_UART1_CTS", 9, 15, 0, 2, 1, 0, 2, 1, 1) +MUX_CFG("AA15_1610_UART1_RTS", 9, 12, 1, 2, 0, 0, 2, 0, 1) + +/* I2C interface */ +MUX_CFG("I2C_SCL", 7, 24, 0, NA, 0, 0, NA, 0, 0) +MUX_CFG("I2C_SDA", 7, 27, 0, NA, 0, 0, NA, 0, 0) + +/* Keypad */ +MUX_CFG("F18_1610_KBC0", 3, 15, 0, 0, 5, 1, 0, 0, 0) +MUX_CFG("D20_1610_KBC1", 3, 12, 0, 0, 4, 1, 0, 0, 0) +MUX_CFG("D19_1610_KBC2", 3, 9, 0, 0, 3, 1, 0, 0, 0) +MUX_CFG("E18_1610_KBC3", 3, 6, 0, 0, 2, 1, 0, 0, 0) +MUX_CFG("C21_1610_KBC4", 3, 3, 0, 0, 1, 1, 0, 0, 0) +MUX_CFG("G18_1610_KBR0", 4, 0, 0, 0, 10, 1, 0, 1, 0) +MUX_CFG("F19_1610_KBR1", 3, 27, 0, 0, 9, 1, 0, 1, 0) +MUX_CFG("H14_1610_KBR2", 3, 24, 0, 0, 8, 1, 0, 1, 0) +MUX_CFG("E20_1610_KBR3", 3, 21, 0, 0, 7, 1, 0, 1, 0) +MUX_CFG("E19_1610_KBR4", 3, 18, 0, 0, 6, 1, 0, 1, 0) +MUX_CFG("N19_1610_KBR5", 6, 12, 1, 1, 2, 1, 1, 1, 0) + +/* Power management */ +MUX_CFG("T20_1610_LOW_PWR", 7, 12, 1, NA, 0, 0, NA, 0, 0) + +/* MCLK Settings */ +MUX_CFG("V5_1710_MCLK_ON", B, 15, 0, NA, 0, 0, NA, 0, 0) +MUX_CFG("V5_1710_MCLK_OFF", B, 15, 6, NA, 0, 0, NA, 0, 0) +MUX_CFG("R10_1610_MCLK_ON", B, 18, 0, NA, 22, 0, NA, 1, 0) +MUX_CFG("R10_1610_MCLK_OFF", B, 18, 6, 2, 22, 1, 2, 1, 1) + +/* CompactFlash controller, conflicts with MMC1 */ +MUX_CFG("P11_1610_CF_CD2", A, 27, 3, 2, 15, 1, 2, 1, 1) +MUX_CFG("R11_1610_CF_IOIS16", B, 0, 3, 2, 16, 1, 2, 1, 1) +MUX_CFG("V10_1610_CF_IREQ", A, 24, 3, 2, 14, 0, 2, 0, 1) +MUX_CFG("W10_1610_CF_RESET", A, 18, 3, 2, 12, 1, 2, 1, 1) +MUX_CFG("W11_1610_CF_CD1", 10, 15, 3, 3, 8, 1, 3, 1, 1) +}; + +#endif /* __MUX_C__ */ + +#ifdef CONFIG_OMAP_MUX +/* setup pin muxing in Linux */ +extern int omap_cfg_reg(reg_cfg_t reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ +static inline int omap_cfg_reg(reg_cfg_t reg_cfg) { return 0; } +#endif + +#endif diff --git a/include/asm-arm/arch-omap/omap1510.h b/include/asm-arm/arch-omap/omap1510.h new file mode 100644 index 00000000000..f491a48ef2e --- /dev/null +++ b/include/asm-arm/arch-omap/omap1510.h @@ -0,0 +1,61 @@ +/* linux/include/asm-arm/arch-omap/omap1510.h + * + * Hardware definitions for TI OMAP1510 processor. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP1510_H +#define __ASM_ARCH_OMAP1510_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP1510_SRAM_BASE 0xD0000000 +#define OMAP1510_SRAM_SIZE (SZ_128K + SZ_64K) +#define OMAP1510_SRAM_START 0x20000000 + +#define OMAP1510_DSP_BASE 0xE0000000 +#define OMAP1510_DSP_SIZE 0x28000 +#define OMAP1510_DSP_START 0xE0000000 + +#define OMAP1510_DSPREG_BASE 0xE1000000 +#define OMAP1510_DSPREG_SIZE SZ_128K +#define OMAP1510_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * Memory used by power management + * ---------------------------------------------------------------------------- + */ + +#define OMAP1510_SRAM_IDLE_SUSPEND (OMAP1510_SRAM_BASE + OMAP1510_SRAM_SIZE - 0x200) +#define OMAP1510_SRAM_API_SUSPEND (OMAP1510_SRAM_IDLE_SUSPEND + 0x100) + +#endif /* __ASM_ARCH_OMAP1510_H */ + diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h new file mode 100644 index 00000000000..88b1fe43ae9 --- /dev/null +++ b/include/asm-arm/arch-omap/omap16xx.h @@ -0,0 +1,187 @@ +/* linux/include/asm-arm/arch-omap/omap16xx.h + * + * Hardware definitions for TI OMAP1610/5912/1710 processors. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP16XX_H +#define __ASM_ARCH_OMAP16XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP16XX_SRAM_BASE 0xD0000000 +#define OMAP1610_SRAM_SIZE (SZ_16K) +#define OMAP5912_SRAM_SIZE 0x3E800 +#define OMAP16XX_SRAM_START 0x20000000 + +#define OMAP16XX_DSP_BASE 0xE0000000 +#define OMAP16XX_DSP_SIZE 0x28000 +#define OMAP16XX_DSP_START 0xE0000000 + +#define OMAP16XX_DSPREG_BASE 0xE1000000 +#define OMAP16XX_DSPREG_SIZE SZ_128K +#define OMAP16XX_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * Memory used by power management + * ---------------------------------------------------------------------------- + */ + +#define OMAP1610_SRAM_IDLE_SUSPEND (OMAP16XX_SRAM_BASE + OMAP1610_SRAM_SIZE - 0x200) +#define OMAP1610_SRAM_API_SUSPEND (OMAP1610_SRAM_IDLE_SUSPEND + 0x100) +#define OMAP5912_SRAM_IDLE_SUSPEND (OMAP16XX_SRAM_BASE + OMAP5912_SRAM_SIZE - 0x200) +#define OMAP5912_SRAM_API_SUSPEND (OMAP5912_SRAM_IDLE_SUSPEND + 0x100) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#define OMAP_IH2_0_BASE (0xfffe0000) +#define OMAP_IH2_1_BASE (0xfffe0100) +#define OMAP_IH2_2_BASE (0xfffe0200) +#define OMAP_IH2_3_BASE (0xfffe0300) + +#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00) +#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04) +#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) +#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14) +#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18) +#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c) +#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c) + +#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00) +#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04) +#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) +#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14) +#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18) +#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c) +#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c) + +#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00) +#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04) +#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) +#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14) +#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18) +#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c) +#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c) + +#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00) +#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04) +#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) +#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14) +#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18) +#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c) +#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +/* + * ---------------------------------------------------------------------------- + * Pin configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10) +#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11) +#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13) + +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP1610_RESET_CONTROL 0xfffe1140 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_SWITCH_BASE (0xfffbc800) +#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) + +/* UART3 Registers Maping through MPU bus */ +#define UART3_RHR (OMAP_UART3_BASE + 0) +#define UART3_THR (OMAP_UART3_BASE + 0) +#define UART3_DLL (OMAP_UART3_BASE + 0) +#define UART3_IER (OMAP_UART3_BASE + 4) +#define UART3_DLH (OMAP_UART3_BASE + 4) +#define UART3_IIR (OMAP_UART3_BASE + 8) +#define UART3_FCR (OMAP_UART3_BASE + 8) +#define UART3_EFR (OMAP_UART3_BASE + 8) +#define UART3_LCR (OMAP_UART3_BASE + 0x0C) +#define UART3_MCR (OMAP_UART3_BASE + 0x10) +#define UART3_XON1_ADDR1 (OMAP_UART3_BASE + 0x10) +#define UART3_XON2_ADDR2 (OMAP_UART3_BASE + 0x14) +#define UART3_LSR (OMAP_UART3_BASE + 0x14) +#define UART3_TCR (OMAP_UART3_BASE + 0x18) +#define UART3_MSR (OMAP_UART3_BASE + 0x18) +#define UART3_XOFF1 (OMAP_UART3_BASE + 0x18) +#define UART3_XOFF2 (OMAP_UART3_BASE + 0x1C) +#define UART3_SPR (OMAP_UART3_BASE + 0x1C) +#define UART3_TLR (OMAP_UART3_BASE + 0x1C) +#define UART3_MDR1 (OMAP_UART3_BASE + 0x20) +#define UART3_MDR2 (OMAP_UART3_BASE + 0x24) +#define UART3_SFLSR (OMAP_UART3_BASE + 0x28) +#define UART3_TXFLL (OMAP_UART3_BASE + 0x28) +#define UART3_RESUME (OMAP_UART3_BASE + 0x2C) +#define UART3_TXFLH (OMAP_UART3_BASE + 0x2C) +#define UART3_SFREGL (OMAP_UART3_BASE + 0x30) +#define UART3_RXFLL (OMAP_UART3_BASE + 0x30) +#define UART3_SFREGH (OMAP_UART3_BASE + 0x34) +#define UART3_RXFLH (OMAP_UART3_BASE + 0x34) +#define UART3_BLR (OMAP_UART3_BASE + 0x38) +#define UART3_ACREG (OMAP_UART3_BASE + 0x3C) +#define UART3_DIV16 (OMAP_UART3_BASE + 0x3C) +#define UART3_SCR (OMAP_UART3_BASE + 0x40) +#define UART3_SSR (OMAP_UART3_BASE + 0x44) +#define UART3_EBLR (OMAP_UART3_BASE + 0x48) +#define UART3_OSC_12M_SEL (OMAP_UART3_BASE + 0x4C) +#define UART3_MVR (OMAP_UART3_BASE + 0x50) + +/* + * ---------------------------------------------------------------------------- + * Pulse-Width Light + * ---------------------------------------------------------------------------- + */ +#define OMAP16XX_PWL_BASE (0xfffb5800) +#define OMAP16XX_PWL_ENABLE (OMAP16XX_PWL_BASE + 0x00) +#define OMAP16XX_PWL_CLK_ENABLE (OMAP16XX_PWL_BASE + 0x04) + +#endif /* __ASM_ARCH_OMAP16XX_H */ + diff --git a/include/asm-arm/arch-omap/omap730.h b/include/asm-arm/arch-omap/omap730.h new file mode 100644 index 00000000000..599ab00f548 --- /dev/null +++ b/include/asm-arm/arch-omap/omap730.h @@ -0,0 +1,106 @@ +/* linux/include/asm-arm/arch-omap/omap730.h + * + * Hardware definitions for TI OMAP730 processor. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP730_H +#define __ASM_ARCH_OMAP730_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP730_SRAM_BASE 0xD0000000 +#define OMAP730_SRAM_SIZE (SZ_128K + SZ_64K + SZ_8K) +#define OMAP730_SRAM_START 0x20000000 + +#define OMAP730_DSP_BASE 0xE0000000 +#define OMAP730_DSP_SIZE 0x50000 +#define OMAP730_DSP_START 0xE0000000 + +#define OMAP730_DSPREG_BASE 0xE1000000 +#define OMAP730_DSPREG_SIZE SZ_128K +#define OMAP730_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_CONFIG_BASE 0xfffe1000 +#define OMAP730_IO_CONF_0 0xfffe1070 +#define OMAP730_IO_CONF_1 0xfffe1074 +#define OMAP730_IO_CONF_2 0xfffe1078 +#define OMAP730_IO_CONF_3 0xfffe107c +#define OMAP730_IO_CONF_4 0xfffe1080 +#define OMAP730_IO_CONF_5 0xfffe1084 +#define OMAP730_IO_CONF_6 0xfffe1088 +#define OMAP730_IO_CONF_7 0xfffe108c +#define OMAP730_IO_CONF_8 0xfffe1090 +#define OMAP730_IO_CONF_9 0xfffe1094 +#define OMAP730_IO_CONF_10 0xfffe1098 +#define OMAP730_IO_CONF_11 0xfffe109c +#define OMAP730_IO_CONF_12 0xfffe10a0 +#define OMAP730_IO_CONF_13 0xfffe10a4 + +#define OMAP730_MODE_1 0xfffe1010 +#define OMAP730_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP730_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_FLASH_CFG_0 0xfffecc10 +#define OMAP730_FLASH_ACFG_0 0xfffecc50 +#define OMAP730_FLASH_CFG_1 0xfffecc14 +#define OMAP730_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_ICR_BASE 0xfffbb800 +#define OMAP730_DSP_M_CTL 0xfffbb804 +#define OMAP730_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP730 PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP730_H */ + diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h new file mode 100644 index 00000000000..face9ad41e9 --- /dev/null +++ b/include/asm-arm/arch-omap/param.h @@ -0,0 +1,8 @@ +/* + * linux/include/asm-arm/arch-omap/param.h + * + */ + +#ifdef CONFIG_OMAP_32K_TIMER_HZ +#define HZ CONFIG_OMAP_32K_TIMER_HZ +#endif diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h new file mode 100644 index 00000000000..f209fc0953f --- /dev/null +++ b/include/asm-arm/arch-omap/pm.h @@ -0,0 +1,229 @@ +/* + * linux/include/asm/arch-omap/pm.h + * + * Header file for OMAP Power Management Routines + * + * Author: MontaVista Software, Inc. + * support@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_PM_H +#define __ASM_ARCH_OMAP_PM_H + +/* + * ---------------------------------------------------------------------------- + * Register and offset definitions to be used in PM assembler code + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_ASM_BASE io_p2v(0xfffece00) +#define ARM_IDLECT1_ASM_OFFSET 0x04 +#define ARM_IDLECT2_ASM_OFFSET 0x08 + +#define TCMIF_ASM_BASE io_p2v(0xfffecc00) +#define EMIFS_CONFIG_ASM_OFFSET 0x0c +#define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20 + +/* + * ---------------------------------------------------------------------------- + * Powermanagement bitmasks + * ---------------------------------------------------------------------------- + */ +#define IDLE_WAIT_CYCLES 0x00000fff +#define PERIPHERAL_ENABLE 0x2 + +#define SELF_REFRESH_MODE 0x0c000001 +#define IDLE_EMIFS_REQUEST 0xc +#define MODEM_32K_EN 0x1 +#define PER_EN 0x1 + +#define CPU_SUSPEND_SIZE 200 +#define ULPD_LOW_POWER_EN 0x0001 + +#define DSP_IDLE_DELAY 10 +#define DSP_IDLE 0x0040 +#define DSP_RST 0x0004 +#define DSP_ENABLE 0x0002 +#define SUFFICIENT_DSP_RESET_TIME 1000 +#define DEFAULT_MPUI_CONFIG 0x05cf +#define ENABLE_XORCLK 0x2 +#define DSP_CLOCK_ENABLE 0x2000 +#define DSP_IDLE_MODE 0x2 +#define TC_IDLE_REQUEST (0x0000000c) + +#define IRQ_LEVEL2 (1<<0) +#define IRQ_KEYBOARD (1<<1) +#define IRQ_UART2 (1<<15) + +#define PDE_BIT 0x08 +#define PWD_EN_BIT 0x04 +#define EN_PERCK_BIT 0x04 + +#define OMAP1510_DEEP_SLEEP_REQUEST 0x0ec7 +#define OMAP1510_BIG_SLEEP_REQUEST 0x0cc5 +#define OMAP1510_IDLE_LOOP_REQUEST 0x0c00 +#define OMAP1510_IDLE_CLOCK_DOMAINS 0x2 +#define OMAP1510_ULPD_LOW_POWER_REQ 0x0001 + +#define OMAP1610_DEEP_SLEEP_REQUEST 0x17c7 +#define OMAP1610_BIG_SLEEP_REQUEST TBD +#define OMAP1610_IDLE_LOOP_REQUEST 0x0400 +#define OMAP1610_IDLE_CLOCK_DOMAINS 0x09c7 +#define OMAP1610_ULPD_LOW_POWER_REQ 0x3 + +#ifndef OMAP1510_SRAM_IDLE_SUSPEND +#define OMAP1510_SRAM_IDLE_SUSPEND 0 +#endif +#ifndef OMAP1610_SRAM_IDLE_SUSPEND +#define OMAP1610_SRAM_IDLE_SUSPEND 0 +#endif +#ifndef OMAP5912_SRAM_IDLE_SUSPEND +#define OMAP5912_SRAM_IDLE_SUSPEND 0 +#endif + +#ifndef OMAP1510_SRAM_API_SUSPEND +#define OMAP1510_SRAM_API_SUSPEND 0 +#endif +#ifndef OMAP1610_SRAM_API_SUSPEND +#define OMAP1610_SRAM_API_SUSPEND 0 +#endif +#ifndef OMAP5912_SRAM_API_SUSPEND +#define OMAP5912_SRAM_API_SUSPEND 0 +#endif + +#if !defined(CONFIG_ARCH_OMAP1510) && \ + !defined(CONFIG_ARCH_OMAP16XX) +#error "Power management for this processor not implemented yet" +#endif + +#ifndef __ASSEMBLER__ +extern void omap_pm_idle(void); +extern void omap_pm_suspend(void); +extern int omap1510_cpu_suspend(unsigned short, unsigned short); +extern int omap1610_cpu_suspend(unsigned short, unsigned short); +extern int omap1510_idle_loop_suspend(void); +extern int omap1610_idle_loop_suspend(void); +extern unsigned int omap1510_cpu_suspend_sz; +extern unsigned int omap1510_idle_loop_suspend_sz; +extern unsigned int omap1610_cpu_suspend_sz; +extern unsigned int omap1610_idle_loop_suspend_sz; + +#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x) +#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x)) +#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] + +#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x) +#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) +#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] + +#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) +#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] + +#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x)) +#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] + +/* + * List of global OMAP registers to preserve. + * More ones like CP and general purpose register values are preserved + * with the stack pointer in sleep.S. + */ + +enum arm_save_state { + ARM_SLEEP_SAVE_START = 0, + /* + * MPU control registers 32 bits + */ + ARM_SLEEP_SAVE_ARM_CKCTL, + ARM_SLEEP_SAVE_ARM_IDLECT1, + ARM_SLEEP_SAVE_ARM_IDLECT2, + ARM_SLEEP_SAVE_ARM_EWUPCT, + ARM_SLEEP_SAVE_ARM_RSTCT1, + ARM_SLEEP_SAVE_ARM_RSTCT2, + ARM_SLEEP_SAVE_ARM_SYSST, + ARM_SLEEP_SAVE_SIZE +}; + +enum ulpd_save_state { + ULPD_SLEEP_SAVE_START = 0, + /* + * ULPD registers 16 bits + */ + ULPD_SLEEP_SAVE_ULPD_IT_STATUS, + ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL, + ULPD_SLEEP_SAVE_ULPD_SOFT_REQ, + ULPD_SLEEP_SAVE_ULPD_STATUS_REQ, + ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL, + ULPD_SLEEP_SAVE_ULPD_POWER_CTRL, + ULPD_SLEEP_SAVE_SIZE +}; + +enum mpui1510_save_state { + MPUI1510_SLEEP_SAVE_START = 0, + /* + * MPUI registers 32 bits + */ + MPUI1510_SLEEP_SAVE_MPUI_CTRL, + MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI1510_SLEEP_SAVE_EMIFS_CONFIG, + MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR, +#if defined(CONFIG_ARCH_OMAP1510) + MPUI1510_SLEEP_SAVE_SIZE +#else + MPUI1510_SLEEP_SAVE_SIZE = 0 +#endif +}; + +enum mpui1610_save_state { + MPUI1610_SLEEP_SAVE_START = 0, + /* + * MPUI registers 32 bits + */ + MPUI1610_SLEEP_SAVE_MPUI_CTRL, + MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI1610_SLEEP_SAVE_EMIFS_CONFIG, + MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR, + MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR, +#if defined(CONFIG_ARCH_OMAP16XX) + MPUI1610_SLEEP_SAVE_SIZE +#else + MPUI1610_SLEEP_SAVE_SIZE = 0 +#endif +}; + +#endif /* ASSEMBLER */ +#endif /* __ASM_ARCH_OMAP_PM_H */ diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h new file mode 100644 index 00000000000..17a2c4825f0 --- /dev/null +++ b/include/asm-arm/arch-omap/system.h @@ -0,0 +1,20 @@ +/* + * Copied from linux/include/asm-arm/arch-sa1100/system.h + * Copyright (c) 1999 Nicolas Pitre <nico@cam.org> + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H +#include <linux/config.h> +#include <asm/arch/hardware.h> + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + omap_writew(1, ARM_RSTCT1); +} + +#endif diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h new file mode 100644 index 00000000000..8ded218cbea --- /dev/null +++ b/include/asm-arm/arch-omap/tc.h @@ -0,0 +1,108 @@ +/* + * linux/include/asm-arm/arch-omap/tc.h + * + * OMAP Traffic Controller + * + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __ASM_ARCH_TC_H +#define __ASM_ARCH_TC_H + +#define TCMIF_BASE 0xfffecc00 +#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00) +#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04) +#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08) +#define EMIFS_CONFIG (TCMIF_BASE + 0x0c) +#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10) +#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14) +#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18) +#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c) +#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20) +#define EMIFF_MRS (TCMIF_BASE + 0x24) +#define TC_TIMEOUT1 (TCMIF_BASE + 0x28) +#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c) +#define TC_TIMEOUT3 (TCMIF_BASE + 0x30) +#define TC_ENDIANISM (TCMIF_BASE + 0x34) +#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c) +#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40) +#define EMIFS_ACS0 (TCMIF_BASE + 0x50) +#define EMIFS_ACS1 (TCMIF_BASE + 0x54) +#define EMIFS_ACS2 (TCMIF_BASE + 0x58) +#define EMIFS_ACS3 (TCMIF_BASE + 0x5c) +#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0) + +/* external EMIFS chipselect regions */ +#define OMAP_CS0_PHYS 0x00000000 +#define OMAP_CS0_SIZE SZ_64M + +#define OMAP_CS1_PHYS 0x04000000 +#define OMAP_CS1_SIZE SZ_64M + +#define OMAP_CS1A_PHYS OMAP_CS1_PHYS +#define OMAP_CS1A_SIZE SZ_32M + +#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE) +#define OMAP_CS1B_SIZE SZ_32M + +#define OMAP_CS2_PHYS 0x08000000 +#define OMAP_CS2_SIZE SZ_64M + +#define OMAP_CS2A_PHYS OMAP_CS2_PHYS +#define OMAP_CS2A_SIZE SZ_32M + +#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE) +#define OMAP_CS2B_SIZE SZ_32M + +#define OMAP_CS3_PHYS 0x0c000000 +#define OMAP_CS3_SIZE SZ_64M + +#ifndef __ASSEMBLER__ + +/* EMIF Slow Interface Configuration Register */ +#define OMAP_EMIFS_CONFIG_REG __REG32(EMIFS_CONFIG) + +#define OMAP_EMIFS_CONFIG_FR (1 << 4) +#define OMAP_EMIFS_CONFIG_PDE (1 << 3) +#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) +#define OMAP_EMIFS_CONFIG_BM (1 << 1) +#define OMAP_EMIFS_CONFIG_WP (1 << 0) + +#define EMIFS_CCS(n) __REG32(EMIFS_CS0_CONFIG + (4 * (n))) +#define EMIFS_ACS(n) __REG32(EMIFS_ACS0 + (4 * (n))) + +/* Almost all documentation for chip and board memory maps assumes + * BM is clear. Most devel boards have a switch to control booting + * from NOR flash (using external chipselect 3) rather than mask ROM, + * which uses BM to interchange the physical CS0 and CS3 addresses. + */ +static inline u32 omap_cs0_phys(void) +{ + return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM) + ? OMAP_CS3_PHYS : 0; +} + +static inline u32 omap_cs3_phys(void) +{ + return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM) + ? 0 : OMAP_CS3_PHYS; +} + +#endif /* __ASSEMBLER__ */ + +#endif /* __ASM_ARCH_TC_H */ diff --git a/include/asm-arm/arch-omap/timex.h b/include/asm-arm/arch-omap/timex.h new file mode 100644 index 00000000000..b61ddb491e8 --- /dev/null +++ b/include/asm-arm/arch-omap/timex.h @@ -0,0 +1,33 @@ +/* + * linux/include/asm-arm/arch-omap/timex.h + * + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if !defined(__ASM_ARCH_OMAP_TIMEX_H) +#define __ASM_ARCH_OMAP_TIMEX_H + +#define CLOCK_TICK_RATE (HZ * 100000UL) + +#endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/include/asm-arm/arch-omap/tps65010.h b/include/asm-arm/arch-omap/tps65010.h new file mode 100644 index 00000000000..0f97bb2e8fc --- /dev/null +++ b/include/asm-arm/arch-omap/tps65010.h @@ -0,0 +1,80 @@ +/* linux/include/asm-arm/arch-omap/tps65010.h + * + * Functions to access TPS65010 power management device. + * + * Copyright (C) 2004 Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_TPS65010_H +#define __ASM_ARCH_TPS65010_H + +/* + * ---------------------------------------------------------------------------- + * Macros used by exported functions + * ---------------------------------------------------------------------------- + */ + +#define LED1 1 +#define LED2 2 +#define OFF 0 +#define ON 1 +#define BLINK 2 +#define GPIO1 1 +#define GPIO2 2 +#define GPIO3 3 +#define GPIO4 4 +#define LOW 0 +#define HIGH 1 + +/* + * ---------------------------------------------------------------------------- + * Exported functions + * ---------------------------------------------------------------------------- + */ + +/* Draw from VBUS: + * 0 mA -- DON'T DRAW (might supply power instead) + * 100 mA -- usb unit load (slowest charge rate) + * 500 mA -- usb high power (fast battery charge) + */ +extern int tps65010_set_vbus_draw(unsigned mA); + +/* tps65010_set_gpio_out_value parameter: + * gpio: GPIO1, GPIO2, GPIO3 or GPIO4 + * value: LOW or HIGH + */ +extern int tps65010_set_gpio_out_value(unsigned gpio, unsigned value); + +/* tps65010_set_led parameter: + * led: LED1 or LED2 + * mode: ON, OFF or BLINK + */ +extern int tps65010_set_led(unsigned led, unsigned mode); + +/* tps65010_set_low_pwr parameter: + * mode: ON or OFF + */ +extern int tps65010_set_low_pwr(unsigned mode); + +#endif /* __ASM_ARCH_TPS65010_H */ + diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h new file mode 100644 index 00000000000..3e640aba8c2 --- /dev/null +++ b/include/asm-arm/arch-omap/uncompress.h @@ -0,0 +1,82 @@ +/* + * linux/include/asm-arm/arch-omap/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/include/asm-arm/arch-omap1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/serial_reg.h> +#include <asm/arch/hardware.h> + +unsigned int system_rev; + +#define UART_OMAP_MDR1 0x08 /* mode definition register */ +#define OMAP_ID_730 0x355F +#define ID_MASK 0x7fff +#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) +#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK + +static void +putstr(const char *s) +{ + volatile u8 * uart = 0; + int shift; + +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + uart = (volatile u8 *)(OMAP_UART3_BASE); +#elif CONFIG_OMAP_LL_DEBUG_UART2 + uart = (volatile u8 *)(OMAP_UART2_BASE); +#else + uart = (volatile u8 *)(OMAP_UART1_BASE); +#endif + + /* Determine which serial port to use */ + do { + /* MMU is not on, so cpu_is_omapXXXX() won't work here */ + unsigned int omap_id = omap_get_id(); + + if (omap_id == OMAP_ID_730) + shift = 0; + else + shift = 2; + + if (check_port(uart, shift)) + break; + /* Silent boot if no serial ports are enabled. */ + return; + } while (0); + + /* + * Now, xmit each character + */ + while (*s) { + while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) + barrier(); + uart[UART_TX << shift] = *s; + if (*s++ == '\n') { + while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) + barrier(); + uart[UART_TX << shift] = '\r'; + } + } +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h new file mode 100644 index 00000000000..1438c6cef0c --- /dev/null +++ b/include/asm-arm/arch-omap/usb.h @@ -0,0 +1,108 @@ +// include/asm-arm/mach-omap/usb.h + +#ifndef __ASM_ARCH_OMAP_USB_H +#define __ASM_ARCH_OMAP_USB_H + +#include <asm/arch/board.h> + +/*-------------------------------------------------------------------------*/ + +#define OTG_BASE 0xfffb0400 +#define UDC_BASE 0xfffb4000 +#define OMAP_OHCI_BASE 0xfffba000 + +/*-------------------------------------------------------------------------*/ + +/* + * OTG and transceiver registers, for OMAPs starting with ARM926 + */ +#define OTG_REG32(offset) __REG32(OTG_BASE + (offset)) +#define OTG_REG16(offset) __REG16(OTG_BASE + (offset)) + +#define OTG_REV_REG OTG_REG32(0x00) +#define OTG_SYSCON_1_REG OTG_REG32(0x04) +# define USB2_TRX_MODE(w) (((w)>>24)&0x07) +# define USB1_TRX_MODE(w) (((w)>>20)&0x07) +# define USB0_TRX_MODE(w) (((w)>>16)&0x07) +# define OTG_IDLE_EN (1 << 15) +# define HST_IDLE_EN (1 << 14) +# define DEV_IDLE_EN (1 << 13) +# define OTG_RESET_DONE (1 << 2) +#define OTG_SYSCON_2_REG OTG_REG32(0x08) +# define OTG_EN (1 << 31) +# define USBX_SYNCHRO (1 << 30) +# define OTG_MST16 (1 << 29) +# define SRP_GPDATA (1 << 28) +# define SRP_GPDVBUS (1 << 27) +# define SRP_GPUVBUS(w) (((w)>>24)&0x07) +# define A_WAIT_VRISE(w) (((w)>>20)&0x07) +# define B_ASE_BRST(w) (((w)>>16)&0x07) +# define SRP_DPW (1 << 14) +# define SRP_DATA (1 << 13) +# define SRP_VBUS (1 << 12) +# define OTG_PADEN (1 << 10) +# define HMC_PADEN (1 << 9) +# define UHOST_EN (1 << 8) +# define HMC_TLLSPEED (1 << 7) +# define HMC_TLLATTACH (1 << 6) +# define OTG_HMC(w) (((w)>>0)&0x3f) +#define OTG_CTRL_REG OTG_REG32(0x0c) +# define OTG_ASESSVLD (1 << 20) +# define OTG_BSESSEND (1 << 19) +# define OTG_BSESSVLD (1 << 18) +# define OTG_VBUSVLD (1 << 17) +# define OTG_ID (1 << 16) +# define OTG_DRIVER_SEL (1 << 15) +# define OTG_A_SETB_HNPEN (1 << 12) +# define OTG_A_BUSREQ (1 << 11) +# define OTG_B_HNPEN (1 << 9) +# define OTG_B_BUSREQ (1 << 8) +# define OTG_BUSDROP (1 << 7) +# define OTG_PULLDOWN (1 << 5) +# define OTG_PULLUP (1 << 4) +# define OTG_DRV_VBUS (1 << 3) +# define OTG_PD_VBUS (1 << 2) +# define OTG_PU_VBUS (1 << 1) +# define OTG_PU_ID (1 << 0) +#define OTG_IRQ_EN_REG OTG_REG16(0x10) +# define DRIVER_SWITCH (1 << 15) +# define A_VBUS_ERR (1 << 13) +# define A_REQ_TMROUT (1 << 12) +# define A_SRP_DETECT (1 << 11) +# define B_HNP_FAIL (1 << 10) +# define B_SRP_TMROUT (1 << 9) +# define B_SRP_DONE (1 << 8) +# define B_SRP_STARTED (1 << 7) +# define OPRT_CHG (1 << 0) +#define OTG_IRQ_SRC_REG OTG_REG16(0x14) + // same bits as in IRQ_EN +#define OTG_OUTCTRL_REG OTG_REG16(0x18) +# define OTGVPD (1 << 14) +# define OTGVPU (1 << 13) +# define OTGPUID (1 << 12) +# define USB2VDR (1 << 10) +# define USB2PDEN (1 << 9) +# define USB2PUEN (1 << 8) +# define USB1VDR (1 << 6) +# define USB1PDEN (1 << 5) +# define USB1PUEN (1 << 4) +# define USB0VDR (1 << 2) +# define USB0PDEN (1 << 1) +# define USB0PUEN (1 << 0) +#define OTG_TEST_REG OTG_REG16(0x20) +#define OTG_VENDOR_CODE_REG OTG_REG32(0xfc) + +/*-------------------------------------------------------------------------*/ + +#define USB_TRANSCEIVER_CTRL_REG __REG32(0xfffe1000 + 0x0064) +# define CONF_USB2_UNI_R (1 << 8) +# define CONF_USB1_UNI_R (1 << 7) +# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) +# define CONF_USB0_ISOLATE_R (1 << 3) +# define CONF_USB_PWRDN_DM_R (1 << 2) +# define CONF_USB_PWRDN_DP_R (1 << 1) + + + + +#endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/include/asm-arm/arch-omap/vmalloc.h b/include/asm-arm/arch-omap/vmalloc.h new file mode 100644 index 00000000000..c6a83581a2f --- /dev/null +++ b/include/asm-arm/arch-omap/vmalloc.h @@ -0,0 +1,33 @@ +/* + * linux/include/asm-arm/arch-omap/vmalloc.h + * + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + */ +#define VMALLOC_OFFSET (8*1024*1024) +#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) +#define VMALLOC_VMADDR(x) ((unsigned long)(x)) +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) + |