diff options
Diffstat (limited to 'include/asm-arm/arch-clps711x/hardware.h')
| -rw-r--r-- | include/asm-arm/arch-clps711x/hardware.h | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h index 1386871e1a5..f864c367c93 100644 --- a/include/asm-arm/arch-clps711x/hardware.h +++ b/include/asm-arm/arch-clps711x/hardware.h @@ -235,4 +235,121 @@ #define CEIVA_PB0_BLK_BTN (1<<0) #endif // #if defined (CONFIG_ARCH_CEIVA) +#if defined (CONFIG_MACH_MP1000) +/* NOR FLASH */ +#define MP1000_NIO_BASE 0xf9000000 /* virtual */ +#define MP1000_NIO_START CS0_PHYS_BASE /* physical */ +#define MP1000_NIO_SIZE 0x00400000 + +/* DSP Interface */ +#define MP1000_DSP_BASE 0xfa000000 /* virtual */ +#define MP1000_DSP_START CS1_PHYS_BASE /* physical */ +#define MP1000_DSP_SIZE 0x00100000 + +/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */ +#define MP1000_LIO_BASE 0xfb000000 /* virtual */ +#define MP1000_LIO_START CS2_PHYS_BASE /* physical */ +#define MP1000_LIO_SIZE 0x00100000 + +/* NAND FLASH */ +#define MP1000_FIO_BASE 0xfc000000 /* virtual */ +#define MP1000_FIO_START CS3_PHYS_BASE /* physical */ +#define MP1000_FIO_SIZE 0x00800000 + +/* Ethernet */ +#define MP1000_EIO_BASE 0xfd000000 /* virtual */ +#define MP1000_EIO_START CS4_PHYS_BASE /* physical */ +#define MP1000_EIO_SIZE 0x00100000 + +#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */ +#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/ +#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */ +#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */ + +/* IDE */ +#define MP1000_IDE_BASE 0xfe000000 /* virtual */ +#define MP1000_IDE_START CS5_PHYS_BASE /* physical */ +#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */ + +#define IRQ_HARDDISK IRQ_EINT2 + +/* + * IDE registers definition + */ + +#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000) +#define IDE_BASE_OFF (MP1000_IDE_BASE) + +#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0) +#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2) +#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4) +#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6) +#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8) +#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa) +#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc) +#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe) +#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc) + +#define IDE_IRQ IRQ_EINT2 + + +#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2)) +#define RTC_ALWAYS_BCD 0 + +/* +// Definitions of the bit fields in the HwPortA register for the +// MP1000 board. +*/ +#define HwPortAKeyboardRow1 0x00000001 +#define HwPortAKeyboardRow2 0x00000002 +#define HwPortAKeyboardRow3 0x00000004 +#define HwPortAKeyboardRow4 0x00000008 +#define HwPortAKeyboardRow5 0x00000010 +#define HwPortAKeyboardRow6 0x00000020 +#define HwPortALCDEnable 0x00000040 +#define HwPortAOffhook 0x00000080 + +/* +// Definitions of the bit fields in the HwPortB register for the +// MP1000 board. +*/ +#define HwPortBL3Mode 0x00000001 +#define HwPortBL3Clk 0x00000002 +#define HwPortBSClk 0x00000001 +#define HwPortBSData 0x00000002 +#define HwPortBL3Data 0x00000004 +#define HwPortBMute 0x00000008 +#define HwPortBQD0 0x00000010 +#define HwPortBQD1 0x00000020 +#define HwPortBQD2 0x00000040 +#define HwPortBQD3 0x00000080 + +/* +// Definitions of the bit fields in the HwPortD register for the +// MP1000 board. +*/ +#define HwPortDLED1 0x00000001 +#define HwPortDLED2 0x00000002 +#define HwPortDLED3 0x00000004 +#define HwPortDLED4 0x00000008 +#define HwPortDLED5 0x00000010 +#define HwPortDEECS 0x00000020 +#define HwPortBRTS 0x00000040 +#define HwPortBRI 0x00000080 + + +/* +// Definitions of the bit fields in the HwPortE register for the +// MP1000 board. +*/ + +#define HwPortECLE 0x00000001 +#define HwPortESepromDOut 0x00000001 +#define HwPortEALE 0x00000002 +#define HwPortESepromDIn 0x00000002 +#define HwPortENANDCS 0x00000004 +#define HwPortESepromCLK 0x00000004 + +#endif // #if defined (CONFIG_MACH_MP1000) + #endif |