aboutsummaryrefslogtreecommitdiff
path: root/fs/jffs2
diff options
context:
space:
mode:
Diffstat (limited to 'fs/jffs2')
-rw-r--r--fs/jffs2/Kconfig188
-rw-r--r--fs/jffs2/compr.c4
-rw-r--r--fs/jffs2/dir.c2
-rw-r--r--fs/jffs2/erase.c4
-rw-r--r--fs/jffs2/fs.c6
-rw-r--r--fs/jffs2/nodemgmt.c4
-rw-r--r--fs/jffs2/wbuf.c5
7 files changed, 202 insertions, 11 deletions
diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig
new file mode 100644
index 00000000000..6ae169cd8fa
--- /dev/null
+++ b/fs/jffs2/Kconfig
@@ -0,0 +1,188 @@
+config JFFS2_FS
+ tristate "Journalling Flash File System v2 (JFFS2) support"
+ select CRC32
+ depends on MTD
+ help
+ JFFS2 is the second generation of the Journalling Flash File System
+ for use on diskless embedded devices. It provides improved wear
+ levelling, compression and support for hard links. You cannot use
+ this on normal block devices, only on 'MTD' devices.
+
+ Further information on the design and implementation of JFFS2 is
+ available at <http://sources.redhat.com/jffs2/>.
+
+config JFFS2_FS_DEBUG
+ int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
+ depends on JFFS2_FS
+ default "0"
+ help
+ This controls the amount of debugging messages produced by the JFFS2
+ code. Set it to zero for use in production systems. For evaluation,
+ testing and debugging, it's advisable to set it to one. This will
+ enable a few assertions and will print debugging messages at the
+ KERN_DEBUG loglevel, where they won't normally be visible. Level 2
+ is unlikely to be useful - it enables extra debugging in certain
+ areas which at one point needed debugging, but when the bugs were
+ located and fixed, the detailed messages were relegated to level 2.
+
+ If reporting bugs, please try to have available a full dump of the
+ messages at debug level 1 while the misbehaviour was occurring.
+
+config JFFS2_FS_WRITEBUFFER
+ bool "JFFS2 write-buffering support"
+ depends on JFFS2_FS
+ default y
+ help
+ This enables the write-buffering support in JFFS2.
+
+ This functionality is required to support JFFS2 on the following
+ types of flash devices:
+ - NAND flash
+ - NOR flash with transparent ECC
+ - DataFlash
+
+config JFFS2_FS_WBUF_VERIFY
+ bool "Verify JFFS2 write-buffer reads"
+ depends on JFFS2_FS_WRITEBUFFER
+ default n
+ help
+ This causes JFFS2 to read back every page written through the
+ write-buffer, and check for errors.
+
+config JFFS2_SUMMARY
+ bool "JFFS2 summary support (EXPERIMENTAL)"
+ depends on JFFS2_FS && EXPERIMENTAL
+ default n
+ help
+ This feature makes it possible to use summary information
+ for faster filesystem mount.
+
+ The summary information can be inserted into a filesystem image
+ by the utility 'sumtool'.
+
+ If unsure, say 'N'.
+
+config JFFS2_FS_XATTR
+ bool "JFFS2 XATTR support (EXPERIMENTAL)"
+ depends on JFFS2_FS && EXPERIMENTAL
+ default n
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+config JFFS2_FS_POSIX_ACL
+ bool "JFFS2 POSIX Access Control Lists"
+ depends on JFFS2_FS_XATTR
+ default y
+ select FS_POSIX_ACL
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the Posix ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config JFFS2_FS_SECURITY
+ bool "JFFS2 Security Labels"
+ depends on JFFS2_FS_XATTR
+ default y
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the jffs2 filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
+
+config JFFS2_COMPRESSION_OPTIONS
+ bool "Advanced compression options for JFFS2"
+ depends on JFFS2_FS
+ default n
+ help
+ Enabling this option allows you to explicitly choose which
+ compression modules, if any, are enabled in JFFS2. Removing
+ compressors can mean you cannot read existing file systems,
+ and enabling experimental compressors can mean that you
+ write a file system which cannot be read by a standard kernel.
+
+ If unsure, you should _definitely_ say 'N'.
+
+config JFFS2_ZLIB
+ bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
+ select ZLIB_INFLATE
+ select ZLIB_DEFLATE
+ depends on JFFS2_FS
+ default y
+ help
+ Zlib is designed to be a free, general-purpose, legally unencumbered,
+ lossless data-compression library for use on virtually any computer
+ hardware and operating system. See <http://www.gzip.org/zlib/> for
+ further information.
+
+ Say 'Y' if unsure.
+
+config JFFS2_LZO
+ bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
+ select LZO_COMPRESS
+ select LZO_DECOMPRESS
+ depends on JFFS2_FS
+ default n
+ help
+ minilzo-based compression. Generally works better than Zlib.
+
+ This feature was added in July, 2007. Say 'N' if you need
+ compatibility with older bootloaders or kernels.
+
+config JFFS2_RTIME
+ bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+ depends on JFFS2_FS
+ default y
+ help
+ Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
+
+config JFFS2_RUBIN
+ bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
+ depends on JFFS2_FS
+ default n
+ help
+ RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
+
+choice
+ prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
+ default JFFS2_CMODE_PRIORITY
+ depends on JFFS2_FS
+ help
+ You can set here the default compression mode of JFFS2 from
+ the available compression modes. Don't touch if unsure.
+
+config JFFS2_CMODE_NONE
+ bool "no compression"
+ help
+ Uses no compression.
+
+config JFFS2_CMODE_PRIORITY
+ bool "priority"
+ help
+ Tries the compressors in a predefined order and chooses the first
+ successful one.
+
+config JFFS2_CMODE_SIZE
+ bool "size (EXPERIMENTAL)"
+ help
+ Tries all compressors and chooses the one which has the smallest
+ result.
+
+config JFFS2_CMODE_FAVOURLZO
+ bool "Favour LZO"
+ help
+ Tries all compressors and chooses the one which has the smallest
+ result but gives some preference to LZO (which has faster
+ decompression) at the expense of size.
+
+endchoice
diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
index 86739ee53b3..f25e70c1b51 100644
--- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c
@@ -53,8 +53,8 @@ static int jffs2_is_best_compression(struct jffs2_compressor *this,
}
/* jffs2_compress:
- * @data: Pointer to uncompressed data
- * @cdata: Pointer to returned pointer to buffer for compressed data
+ * @data_in: Pointer to uncompressed data
+ * @cpage_out: Pointer to returned pointer to buffer for compressed data
* @datalen: On entry, holds the amount of data available for compression.
* On exit, expected to hold the amount of data actually compressed.
* @cdatalen: On entry, holds the amount of space available for compressed
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index cd219ef5525..b1aaae823a5 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -311,7 +311,7 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char
/* FIXME: If you care. We'd need to use frags for the target
if it grows much more than this */
if (targetlen > 254)
- return -EINVAL;
+ return -ENAMETOOLONG;
ri = jffs2_alloc_raw_inode();
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index dddb2a6c9e2..259461b910a 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -68,7 +68,7 @@ static void jffs2_erase_block(struct jffs2_sb_info *c,
instr->len = c->sector_size;
instr->callback = jffs2_erase_callback;
instr->priv = (unsigned long)(&instr[1]);
- instr->fail_addr = 0xffffffff;
+ instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
((struct erase_priv_struct *)instr->priv)->jeb = jeb;
((struct erase_priv_struct *)instr->priv)->c = c;
@@ -175,7 +175,7 @@ static void jffs2_erase_failed(struct jffs2_sb_info *c, struct jffs2_eraseblock
{
/* For NAND, if the failure did not occur at the device level for a
specific physical page, don't bother updating the bad block table. */
- if (jffs2_cleanmarker_oob(c) && (bad_offset != 0xffffffff)) {
+ if (jffs2_cleanmarker_oob(c) && (bad_offset != MTD_FAIL_ADDR_UNKNOWN)) {
/* We had a device-level failure to erase. Let's see if we've
failed too many times. */
if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) {
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 086c4383022..249305d65d5 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -207,6 +207,8 @@ int jffs2_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_files = 0;
buf->f_ffree = 0;
buf->f_namelen = JFFS2_MAX_NAME_LEN;
+ buf->f_fsid.val[0] = JFFS2_SUPER_MAGIC;
+ buf->f_fsid.val[1] = c->mtd->index;
spin_lock(&c->erase_completion_lock);
avail = c->dirty_size + c->free_size;
@@ -440,14 +442,14 @@ struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_i
memset(ri, 0, sizeof(*ri));
/* Set OS-specific defaults for new inodes */
- ri->uid = cpu_to_je16(current->fsuid);
+ ri->uid = cpu_to_je16(current_fsuid());
if (dir_i->i_mode & S_ISGID) {
ri->gid = cpu_to_je16(dir_i->i_gid);
if (S_ISDIR(mode))
mode |= S_ISGID;
} else {
- ri->gid = cpu_to_je16(current->fsgid);
+ ri->gid = cpu_to_je16(current_fsgid());
}
/* POSIX ACLs have to be processed now, at least partly.
diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
index a9bf9603c1b..0875b60b4bf 100644
--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -261,6 +261,10 @@ static int jffs2_find_nextblock(struct jffs2_sb_info *c)
jffs2_sum_reset_collected(c->summary); /* reset collected summary */
+ /* adjust write buffer offset, else we get a non contiguous write bug */
+ if (!(c->wbuf_ofs % c->sector_size) && !c->wbuf_len)
+ c->wbuf_ofs = 0xffffffff;
+
D1(printk(KERN_DEBUG "jffs2_find_nextblock(): new nextblock = 0x%08x\n", c->nextblock->offset));
return 0;
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 0e78b00035e..d9a721e6db7 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -679,10 +679,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
memset(c->wbuf,0xff,c->wbuf_pagesize);
/* adjust write buffer offset, else we get a non contiguous write bug */
- if (SECTOR_ADDR(c->wbuf_ofs) == SECTOR_ADDR(c->wbuf_ofs+c->wbuf_pagesize))
- c->wbuf_ofs += c->wbuf_pagesize;
- else
- c->wbuf_ofs = 0xffffffff;
+ c->wbuf_ofs += c->wbuf_pagesize;
c->wbuf_len = 0;
return 0;
}
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-25 15:38:10 +0000