diff options
Diffstat (limited to 'fs/jbd/journal.c')
| -rw-r--r-- | fs/jbd/journal.c | 74 |
1 files changed, 34 insertions, 40 deletions
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index f66724ce443..2fc66c3e668 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -181,7 +181,7 @@ loop: transaction->t_expires)) should_sleep = 0; if (journal->j_flags & JFS_UNMOUNT) - should_sleep = 0; + should_sleep = 0; if (should_sleep) { spin_unlock(&journal->j_state_lock); schedule(); @@ -271,7 +271,7 @@ static void journal_kill_thread(journal_t *journal) int journal_write_metadata_buffer(transaction_t *transaction, struct journal_head *jh_in, struct journal_head **jh_out, - int blocknr) + unsigned long blocknr) { int need_copy_out = 0; int done_copy_out = 0; @@ -578,7 +578,7 @@ int journal_next_log_block(journal_t *journal, unsigned long *retp) * this is a no-op. If needed, we can use j_blk_offset - everything is * ready. */ -int journal_bmap(journal_t *journal, unsigned long blocknr, +int journal_bmap(journal_t *journal, unsigned long blocknr, unsigned long *retp) { int err = 0; @@ -696,13 +696,13 @@ fail: * @bdev: Block device on which to create the journal * @fs_dev: Device which hold journalled filesystem for this journal. * @start: Block nr Start of journal. - * @len: Lenght of the journal in blocks. + * @len: Length of the journal in blocks. * @blocksize: blocksize of journalling device * @returns: a newly created journal_t * - * + * * journal_init_dev creates a journal which maps a fixed contiguous * range of blocks on an arbitrary block device. - * + * */ journal_t * journal_init_dev(struct block_device *bdev, struct block_device *fs_dev, @@ -739,11 +739,11 @@ journal_t * journal_init_dev(struct block_device *bdev, return journal; } - -/** + +/** * journal_t * journal_init_inode () - creates a journal which maps to a inode. * @inode: An inode to create the journal in - * + * * journal_init_inode creates a journal which maps an on-disk inode as * the journal. The inode must exist already, must support bmap() and * must have all data blocks preallocated. @@ -763,7 +763,7 @@ journal_t * journal_init_inode (struct inode *inode) journal->j_inode = inode; jbd_debug(1, "journal %p: inode %s/%ld, size %Ld, bits %d, blksize %ld\n", - journal, inode->i_sb->s_id, inode->i_ino, + journal, inode->i_sb->s_id, inode->i_ino, (long long) inode->i_size, inode->i_sb->s_blocksize_bits, inode->i_sb->s_blocksize); @@ -798,10 +798,10 @@ journal_t * journal_init_inode (struct inode *inode) return journal; } -/* +/* * If the journal init or create aborts, we need to mark the journal * superblock as being NULL to prevent the journal destroy from writing - * back a bogus superblock. + * back a bogus superblock. */ static void journal_fail_superblock (journal_t *journal) { @@ -820,7 +820,7 @@ static void journal_fail_superblock (journal_t *journal) static int journal_reset(journal_t *journal) { journal_superblock_t *sb = journal->j_superblock; - unsigned int first, last; + unsigned long first, last; first = be32_to_cpu(sb->s_first); last = be32_to_cpu(sb->s_maxlen); @@ -844,13 +844,13 @@ static int journal_reset(journal_t *journal) return 0; } -/** +/** * int journal_create() - Initialise the new journal file * @journal: Journal to create. This structure must have been initialised - * + * * Given a journal_t structure which tells us which disk blocks we can * use, create a new journal superblock and initialise all of the - * journal fields from scratch. + * journal fields from scratch. **/ int journal_create(journal_t *journal) { @@ -915,7 +915,7 @@ int journal_create(journal_t *journal) return journal_reset(journal); } -/** +/** * void journal_update_superblock() - Update journal sb on disk. * @journal: The journal to update. * @wait: Set to '0' if you don't want to wait for IO completion. @@ -939,7 +939,7 @@ void journal_update_superblock(journal_t *journal, int wait) journal->j_transaction_sequence) { jbd_debug(1,"JBD: Skipping superblock update on recovered sb " "(start %ld, seq %d, errno %d)\n", - journal->j_tail, journal->j_tail_sequence, + journal->j_tail, journal->j_tail_sequence, journal->j_errno); goto out; } @@ -1062,7 +1062,7 @@ static int load_superblock(journal_t *journal) /** * int journal_load() - Read journal from disk. * @journal: Journal to act on. - * + * * Given a journal_t structure which tells us which disk blocks contain * a journal, read the journal from disk to initialise the in-memory * structures. @@ -1094,7 +1094,7 @@ int journal_load(journal_t *journal) /* * Create a slab for this blocksize */ - err = journal_create_jbd_slab(cpu_to_be32(sb->s_blocksize)); + err = journal_create_jbd_slab(be32_to_cpu(sb->s_blocksize)); if (err) return err; @@ -1172,9 +1172,9 @@ void journal_destroy(journal_t *journal) * @compat: bitmask of compatible features * @ro: bitmask of features that force read-only mount * @incompat: bitmask of incompatible features - * + * * Check whether the journal uses all of a given set of - * features. Return true (non-zero) if it does. + * features. Return true (non-zero) if it does. **/ int journal_check_used_features (journal_t *journal, unsigned long compat, @@ -1203,7 +1203,7 @@ int journal_check_used_features (journal_t *journal, unsigned long compat, * @compat: bitmask of compatible features * @ro: bitmask of features that force read-only mount * @incompat: bitmask of incompatible features - * + * * Check whether the journaling code supports the use of * all of a given set of features on this journal. Return true * (non-zero) if it can. */ @@ -1241,7 +1241,7 @@ int journal_check_available_features (journal_t *journal, unsigned long compat, * @incompat: bitmask of incompatible features * * Mark a given journal feature as present on the - * superblock. Returns true if the requested features could be set. + * superblock. Returns true if the requested features could be set. * */ @@ -1327,7 +1327,7 @@ static int journal_convert_superblock_v1(journal_t *journal, /** * int journal_flush () - Flush journal * @journal: Journal to act on. - * + * * Flush all data for a given journal to disk and empty the journal. * Filesystems can use this when remounting readonly to ensure that * recovery does not need to happen on remount. @@ -1394,7 +1394,7 @@ int journal_flush(journal_t *journal) * int journal_wipe() - Wipe journal contents * @journal: Journal to act on. * @write: flag (see below) - * + * * Wipe out all of the contents of a journal, safely. This will produce * a warning if the journal contains any valid recovery information. * Must be called between journal_init_*() and journal_load(). @@ -1449,7 +1449,7 @@ static const char *journal_dev_name(journal_t *journal, char *buffer) /* * Journal abort has very specific semantics, which we describe - * for journal abort. + * for journal abort. * * Two internal function, which provide abort to te jbd layer * itself are here. @@ -1504,7 +1504,7 @@ static void __journal_abort_soft (journal_t *journal, int errno) * Perform a complete, immediate shutdown of the ENTIRE * journal (not of a single transaction). This operation cannot be * undone without closing and reopening the journal. - * + * * The journal_abort function is intended to support higher level error * recovery mechanisms such as the ext2/ext3 remount-readonly error * mode. @@ -1538,7 +1538,7 @@ static void __journal_abort_soft (journal_t *journal, int errno) * supply an errno; a null errno implies that absolutely no further * writes are done to the journal (unless there are any already in * progress). - * + * */ void journal_abort(journal_t *journal, int errno) @@ -1546,7 +1546,7 @@ void journal_abort(journal_t *journal, int errno) __journal_abort_soft(journal, errno); } -/** +/** * int journal_errno () - returns the journal's error state. * @journal: journal to examine. * @@ -1570,7 +1570,7 @@ int journal_errno(journal_t *journal) return err; } -/** +/** * int journal_clear_err () - clears the journal's error state * @journal: journal to act on. * @@ -1590,7 +1590,7 @@ int journal_clear_err(journal_t *journal) return err; } -/** +/** * void journal_ack_err() - Ack journal err. * @journal: journal to act on. * @@ -1612,7 +1612,7 @@ int journal_blocks_per_page(struct inode *inode) /* * Simple support for retrying memory allocations. Introduced to help to - * debug different VM deadlock avoidance strategies. + * debug different VM deadlock avoidance strategies. */ void * __jbd_kmalloc (const char *where, size_t size, gfp_t flags, int retry) { @@ -2047,13 +2047,7 @@ static int __init journal_init(void) { int ret; -/* Static check for data structure consistency. There's no code - * invoked --- we'll just get a linker failure if things aren't right. - */ - extern void journal_bad_superblock_size(void); - if (sizeof(struct journal_superblock_s) != 1024) - journal_bad_superblock_size(); - + BUILD_BUG_ON(sizeof(struct journal_superblock_s) != 1024); ret = journal_init_caches(); if (ret != 0) |