diff options
Diffstat (limited to 'fs/ext3')
| -rw-r--r-- | fs/ext3/balloc.c | 16 | ||||
| -rw-r--r-- | fs/ext3/bitmap.c | 2 | ||||
| -rw-r--r-- | fs/ext3/dir.c | 14 | ||||
| -rw-r--r-- | fs/ext3/file.c | 2 | ||||
| -rw-r--r-- | fs/ext3/fsync.c | 6 | ||||
| -rw-r--r-- | fs/ext3/hash.c | 6 | ||||
| -rw-r--r-- | fs/ext3/ialloc.c | 48 | ||||
| -rw-r--r-- | fs/ext3/inode.c | 64 | ||||
| -rw-r--r-- | fs/ext3/namei.c | 28 | ||||
| -rw-r--r-- | fs/ext3/super.c | 24 |
10 files changed, 105 insertions, 105 deletions
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c index 063d994bda0..e6b98370700 100644 --- a/fs/ext3/balloc.c +++ b/fs/ext3/balloc.c @@ -74,7 +74,7 @@ struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb, } /* - * Read the bitmap for a given block_group, reading into the specified + * Read the bitmap for a given block_group, reading into the specified * slot in the superblock's bitmap cache. * * Return buffer_head on success or NULL in case of failure. @@ -419,8 +419,8 @@ do_more: } /* @@@ This prevents newly-allocated data from being * freed and then reallocated within the same - * transaction. - * + * transaction. + * * Ideally we would want to allow that to happen, but to * do so requires making journal_forget() capable of * revoking the queued write of a data block, which @@ -433,7 +433,7 @@ do_more: * safe not to set the allocation bit in the committed * bitmap, because we know that there is no outstanding * activity on the buffer any more and so it is safe to - * reallocate it. + * reallocate it. */ BUFFER_TRACE(bitmap_bh, "set in b_committed_data"); J_ASSERT_BH(bitmap_bh, @@ -518,7 +518,7 @@ void ext3_free_blocks(handle_t *handle, struct inode *inode, * data would allow the old block to be overwritten before the * transaction committed (because we force data to disk before commit). * This would lead to corruption if we crashed between overwriting the - * data and committing the delete. + * data and committing the delete. * * @@@ We may want to make this allocation behaviour conditional on * data-writes at some point, and disable it for metadata allocations or @@ -584,7 +584,7 @@ find_next_usable_block(ext3_grpblk_t start, struct buffer_head *bh, if (start > 0) { /* - * The goal was occupied; search forward for a free + * The goal was occupied; search forward for a free * block within the next XX blocks. * * end_goal is more or less random, but it has to be @@ -1194,7 +1194,7 @@ int ext3_should_retry_alloc(struct super_block *sb, int *retries) /* * ext3_new_block uses a goal block to assist allocation. If the goal is * free, or there is a free block within 32 blocks of the goal, that block - * is allocated. Otherwise a forward search is made for a free block; within + * is allocated. Otherwise a forward search is made for a free block; within * each block group the search first looks for an entire free byte in the block * bitmap, and then for any free bit if that fails. * This function also updates quota and i_blocks field. @@ -1303,7 +1303,7 @@ retry_alloc: smp_rmb(); /* - * Now search the rest of the groups. We assume that + * Now search the rest of the groups. We assume that * i and gdp correctly point to the last group visited. */ for (bgi = 0; bgi < ngroups; bgi++) { diff --git a/fs/ext3/bitmap.c b/fs/ext3/bitmap.c index ce4f82b9e52..b9176eed98d 100644 --- a/fs/ext3/bitmap.c +++ b/fs/ext3/bitmap.c @@ -20,7 +20,7 @@ unsigned long ext3_count_free (struct buffer_head * map, unsigned int numchars) unsigned int i; unsigned long sum = 0; - if (!map) + if (!map) return (0); for (i = 0; i < numchars; i++) sum += nibblemap[map->b_data[i] & 0xf] + diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c index fbb0d4ed07d..6f9e5a523c8 100644 --- a/fs/ext3/dir.c +++ b/fs/ext3/dir.c @@ -59,7 +59,7 @@ static unsigned char get_dtype(struct super_block *sb, int filetype) return (ext3_filetype_table[filetype]); } - + int ext3_check_dir_entry (const char * function, struct inode * dir, struct ext3_dir_entry_2 * de, @@ -162,7 +162,7 @@ revalidate: * to make sure. */ if (filp->f_version != inode->i_version) { for (i = 0; i < sb->s_blocksize && i < offset; ) { - de = (struct ext3_dir_entry_2 *) + de = (struct ext3_dir_entry_2 *) (bh->b_data + i); /* It's too expensive to do a full * dirent test each time round this @@ -181,7 +181,7 @@ revalidate: filp->f_version = inode->i_version; } - while (!error && filp->f_pos < inode->i_size + while (!error && filp->f_pos < inode->i_size && offset < sb->s_blocksize) { de = (struct ext3_dir_entry_2 *) (bh->b_data + offset); if (!ext3_check_dir_entry ("ext3_readdir", inode, de, @@ -229,7 +229,7 @@ out: /* * These functions convert from the major/minor hash to an f_pos * value. - * + * * Currently we only use major hash numer. This is unfortunate, but * on 32-bit machines, the same VFS interface is used for lseek and * llseek, so if we use the 64 bit offset, then the 32-bit versions of @@ -250,7 +250,7 @@ out: struct fname { __u32 hash; __u32 minor_hash; - struct rb_node rb_hash; + struct rb_node rb_hash; struct fname *next; __u32 inode; __u8 name_len; @@ -410,7 +410,7 @@ static int call_filldir(struct file * filp, void * dirent, curr_pos = hash2pos(fname->hash, fname->minor_hash); while (fname) { error = filldir(dirent, fname->name, - fname->name_len, curr_pos, + fname->name_len, curr_pos, fname->inode, get_dtype(sb, fname->file_type)); if (error) { @@ -465,7 +465,7 @@ static int ext3_dx_readdir(struct file * filp, /* * Fill the rbtree if we have no more entries, * or the inode has changed since we last read in the - * cached entries. + * cached entries. */ if ((!info->curr_node) || (filp->f_version != inode->i_version)) { diff --git a/fs/ext3/file.c b/fs/ext3/file.c index 1efefb630ea..994efd189f4 100644 --- a/fs/ext3/file.c +++ b/fs/ext3/file.c @@ -100,7 +100,7 @@ ext3_file_write(struct kiocb *iocb, const char __user *buf, size_t count, loff_t force_commit: err = ext3_force_commit(inode->i_sb); - if (err) + if (err) return err; return ret; } diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c index 49382a208e0..dd1fd3c0fc0 100644 --- a/fs/ext3/fsync.c +++ b/fs/ext3/fsync.c @@ -8,14 +8,14 @@ * Universite Pierre et Marie Curie (Paris VI) * from * linux/fs/minix/truncate.c Copyright (C) 1991, 1992 Linus Torvalds - * + * * ext3fs fsync primitive * * Big-endian to little-endian byte-swapping/bitmaps by * David S. Miller (davem@caip.rutgers.edu), 1995 - * + * * Removed unnecessary code duplication for little endian machines - * and excessive __inline__s. + * and excessive __inline__s. * Andi Kleen, 1997 * * Major simplications and cleanup - we only need to do the metadata, because diff --git a/fs/ext3/hash.c b/fs/ext3/hash.c index 5a2d1235ead..7fa637cd322 100644 --- a/fs/ext3/hash.c +++ b/fs/ext3/hash.c @@ -4,7 +4,7 @@ * Copyright (C) 2002 by Theodore Ts'o * * This file is released under the GPL v2. - * + * * This file may be redistributed under the terms of the GNU Public * License. */ @@ -80,11 +80,11 @@ static void str2hashbuf(const char *msg, int len, __u32 *buf, int num) * Returns the hash of a filename. If len is 0 and name is NULL, then * this function can be used to test whether or not a hash version is * supported. - * + * * The seed is an 4 longword (32 bits) "secret" which can be used to * uniquify a hash. If the seed is all zero's, then some default seed * may be used. - * + * * A particular hash version specifies whether or not the seed is * represented, and whether or not the returned hash is 32 bits or 64 * bits. 32 bit hashes will return 0 for the minor hash. diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c index 36546ed36a1..5e288368499 100644 --- a/fs/ext3/ialloc.c +++ b/fs/ext3/ialloc.c @@ -216,7 +216,7 @@ static int find_group_dir(struct super_block *sb, struct inode *parent) continue; if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei) continue; - if (!best_desc || + if (!best_desc || (le16_to_cpu(desc->bg_free_blocks_count) > le16_to_cpu(best_desc->bg_free_blocks_count))) { best_group = group; @@ -226,30 +226,30 @@ static int find_group_dir(struct super_block *sb, struct inode *parent) return best_group; } -/* - * Orlov's allocator for directories. - * +/* + * Orlov's allocator for directories. + * * We always try to spread first-level directories. * - * If there are blockgroups with both free inodes and free blocks counts - * not worse than average we return one with smallest directory count. - * Otherwise we simply return a random group. - * - * For the rest rules look so: - * - * It's OK to put directory into a group unless - * it has too many directories already (max_dirs) or - * it has too few free inodes left (min_inodes) or - * it has too few free blocks left (min_blocks) or - * it's already running too large debt (max_debt). - * Parent's group is prefered, if it doesn't satisfy these - * conditions we search cyclically through the rest. If none - * of the groups look good we just look for a group with more - * free inodes than average (starting at parent's group). - * - * Debt is incremented each time we allocate a directory and decremented - * when we allocate an inode, within 0--255. - */ + * If there are blockgroups with both free inodes and free blocks counts + * not worse than average we return one with smallest directory count. + * Otherwise we simply return a random group. + * + * For the rest rules look so: + * + * It's OK to put directory into a group unless + * it has too many directories already (max_dirs) or + * it has too few free inodes left (min_inodes) or + * it has too few free blocks left (min_blocks) or + * it's already running too large debt (max_debt). + * Parent's group is prefered, if it doesn't satisfy these + * conditions we search cyclically through the rest. If none + * of the groups look good we just look for a group with more + * free inodes than average (starting at parent's group). + * + * Debt is incremented each time we allocate a directory and decremented + * when we allocate an inode, within 0--255. + */ #define INODE_COST 64 #define BLOCK_COST 256 @@ -454,7 +454,7 @@ struct inode *ext3_new_inode(handle_t *handle, struct inode * dir, int mode) group = find_group_dir(sb, dir); else group = find_group_orlov(sb, dir); - } else + } else group = find_group_other(sb, dir); err = -ENOSPC; diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 84be02e9365..473d206b1d7 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -55,7 +55,7 @@ static int ext3_inode_is_fast_symlink(struct inode *inode) /* * The ext3 forget function must perform a revoke if we are freeing data * which has been journaled. Metadata (eg. indirect blocks) must be - * revoked in all cases. + * revoked in all cases. * * "bh" may be NULL: a metadata block may have been freed from memory * but there may still be a record of it in the journal, and that record @@ -105,7 +105,7 @@ int ext3_forget(handle_t *handle, int is_metadata, struct inode *inode, * Work out how many blocks we need to proceed with the next chunk of a * truncate transaction. */ -static unsigned long blocks_for_truncate(struct inode *inode) +static unsigned long blocks_for_truncate(struct inode *inode) { unsigned long needed; @@ -122,13 +122,13 @@ static unsigned long blocks_for_truncate(struct inode *inode) /* But we need to bound the transaction so we don't overflow the * journal. */ - if (needed > EXT3_MAX_TRANS_DATA) + if (needed > EXT3_MAX_TRANS_DATA) needed = EXT3_MAX_TRANS_DATA; return EXT3_DATA_TRANS_BLOCKS(inode->i_sb) + needed; } -/* +/* * Truncate transactions can be complex and absolutely huge. So we need to * be able to restart the transaction at a conventient checkpoint to make * sure we don't overflow the journal. @@ -136,9 +136,9 @@ static unsigned long blocks_for_truncate(struct inode *inode) * start_transaction gets us a new handle for a truncate transaction, * and extend_transaction tries to extend the existing one a bit. If * extend fails, we need to propagate the failure up and restart the - * transaction in the top-level truncate loop. --sct + * transaction in the top-level truncate loop. --sct */ -static handle_t *start_transaction(struct inode *inode) +static handle_t *start_transaction(struct inode *inode) { handle_t *result; @@ -215,12 +215,12 @@ void ext3_delete_inode (struct inode * inode) ext3_orphan_del(handle, inode); EXT3_I(inode)->i_dtime = get_seconds(); - /* + /* * One subtle ordering requirement: if anything has gone wrong * (transaction abort, IO errors, whatever), then we can still * do these next steps (the fs will already have been marked as * having errors), but we can't free the inode if the mark_dirty - * fails. + * fails. */ if (ext3_mark_inode_dirty(handle, inode)) /* If that failed, just do the required in-core inode clear. */ @@ -398,7 +398,7 @@ no_block: * + if there is a block to the left of our position - allocate near it. * + if pointer will live in indirect block - allocate near that block. * + if pointer will live in inode - allocate in the same - * cylinder group. + * cylinder group. * * In the latter case we colour the starting block by the callers PID to * prevent it from clashing with concurrent allocations for a different inode @@ -744,7 +744,7 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode, jbd_debug(5, "splicing indirect only\n"); BUFFER_TRACE(where->bh, "call ext3_journal_dirty_metadata"); err = ext3_journal_dirty_metadata(handle, where->bh); - if (err) + if (err) goto err_out; } else { /* @@ -1137,7 +1137,7 @@ static int walk_page_buffers( handle_t *handle, * So what we do is to rely on the fact that journal_stop/journal_start * will _not_ run commit under these circumstances because handle->h_ref * is elevated. We'll still have enough credits for the tiny quotafile - * write. + * write. */ static int do_journal_get_write_access(handle_t *handle, struct buffer_head *bh) @@ -1282,7 +1282,7 @@ static int ext3_journalled_commit_write(struct file *file, if (inode->i_size > EXT3_I(inode)->i_disksize) { EXT3_I(inode)->i_disksize = inode->i_size; ret2 = ext3_mark_inode_dirty(handle, inode); - if (!ret) + if (!ret) ret = ret2; } ret2 = ext3_journal_stop(handle); @@ -1291,7 +1291,7 @@ static int ext3_journalled_commit_write(struct file *file, return ret; } -/* +/* * bmap() is special. It gets used by applications such as lilo and by * the swapper to find the on-disk block of a specific piece of data. * @@ -1300,10 +1300,10 @@ static int ext3_journalled_commit_write(struct file *file, * filesystem and enables swap, then they may get a nasty shock when the * data getting swapped to that swapfile suddenly gets overwritten by * the original zero's written out previously to the journal and - * awaiting writeback in the kernel's buffer cache. + * awaiting writeback in the kernel's buffer cache. * * So, if we see any bmap calls here on a modified, data-journaled file, - * take extra steps to flush any blocks which might be in the cache. + * take extra steps to flush any blocks which might be in the cache. */ static sector_t ext3_bmap(struct address_space *mapping, sector_t block) { @@ -1312,16 +1312,16 @@ static sector_t ext3_bmap(struct address_space *mapping, sector_t block) int err; if (EXT3_I(inode)->i_state & EXT3_STATE_JDATA) { - /* + /* * This is a REALLY heavyweight approach, but the use of * bmap on dirty files is expected to be extremely rare: * only if we run lilo or swapon on a freshly made file - * do we expect this to happen. + * do we expect this to happen. * * (bmap requires CAP_SYS_RAWIO so this does not * represent an unprivileged user DOS attack --- we'd be * in trouble if mortal users could trigger this path at - * will.) + * will.) * * NB. EXT3_STATE_JDATA is not set on files other than * regular files. If somebody wants to bmap a directory @@ -1457,7 +1457,7 @@ static int ext3_ordered_writepage(struct page *page, */ /* - * And attach them to the current transaction. But only if + * And attach them to the current transaction. But only if * block_write_full_page() succeeded. Otherwise they are unmapped, * and generally junk. */ @@ -1644,7 +1644,7 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, } } - ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov, + ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov, offset, nr_segs, ext3_get_block, NULL); @@ -2025,7 +2025,7 @@ static void ext3_free_data(handle_t *handle, struct inode *inode, __le32 *first, __le32 *last) { ext3_fsblk_t block_to_free = 0; /* Starting block # of a run */ - unsigned long count = 0; /* Number of blocks in the run */ + unsigned long count = 0; /* Number of blocks in the run */ __le32 *block_to_free_p = NULL; /* Pointer into inode/ind corresponding to block_to_free */ @@ -2054,7 +2054,7 @@ static void ext3_free_data(handle_t *handle, struct inode *inode, } else if (nr == block_to_free + count) { count++; } else { - ext3_clear_blocks(handle, inode, this_bh, + ext3_clear_blocks(handle, inode, this_bh, block_to_free, count, block_to_free_p, p); block_to_free = nr; @@ -2184,7 +2184,7 @@ static void ext3_free_branches(handle_t *handle, struct inode *inode, *p = 0; BUFFER_TRACE(parent_bh, "call ext3_journal_dirty_metadata"); - ext3_journal_dirty_metadata(handle, + ext3_journal_dirty_metadata(handle, parent_bh); } } @@ -2704,7 +2704,7 @@ void ext3_read_inode(struct inode * inode) if (raw_inode->i_block[0]) init_special_inode(inode, inode->i_mode, old_decode_dev(le32_to_cpu(raw_inode->i_block[0]))); - else + else init_special_inode(inode, inode->i_mode, new_decode_dev(le32_to_cpu(raw_inode->i_block[1]))); } @@ -2724,8 +2724,8 @@ bad_inode: * * The caller must have write access to iloc->bh. */ -static int ext3_do_update_inode(handle_t *handle, - struct inode *inode, +static int ext3_do_update_inode(handle_t *handle, + struct inode *inode, struct ext3_iloc *iloc) { struct ext3_inode *raw_inode = ext3_raw_inode(iloc); @@ -2900,7 +2900,7 @@ int ext3_write_inode(struct inode *inode, int wait) * commit will leave the blocks being flushed in an unused state on * disk. (On recovery, the inode will get truncated and the blocks will * be freed, so we have a strong guarantee that no future commit will - * leave these blocks visible to the user.) + * leave these blocks visible to the user.) * * Called with inode->sem down. */ @@ -3043,13 +3043,13 @@ int ext3_mark_iloc_dirty(handle_t *handle, return err; } -/* +/* * On success, We end up with an outstanding reference count against - * iloc->bh. This _must_ be cleaned up later. + * iloc->bh. This _must_ be cleaned up later. */ int -ext3_reserve_inode_write(handle_t *handle, struct inode *inode, +ext3_reserve_inode_write(handle_t *handle, struct inode *inode, struct ext3_iloc *iloc) { int err = 0; @@ -3139,7 +3139,7 @@ out: } #if 0 -/* +/* * Bind an inode's backing buffer_head into this transaction, to prevent * it from being flushed to disk early. Unlike * ext3_reserve_inode_write, this leaves behind no bh reference and @@ -3157,7 +3157,7 @@ static int ext3_pin_inode(handle_t *handle, struct inode *inode) BUFFER_TRACE(iloc.bh, "get_write_access"); err = journal_get_write_access(handle, iloc.bh); if (!err) - err = ext3_journal_dirty_metadata(handle, + err = ext3_journal_dirty_metadata(handle, iloc.bh); brelse(iloc.bh); } diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 2aa7101b27c..4123f5261bc 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -76,7 +76,7 @@ static struct buffer_head *ext3_append(handle_t *handle, #ifdef DX_DEBUG #define dxtrace(command) command #else -#define dxtrace(command) +#define dxtrace(command) #endif struct fake_dirent @@ -169,7 +169,7 @@ static struct ext3_dir_entry_2* dx_pack_dirents (char *base, int size); static void dx_insert_block (struct dx_frame *frame, u32 hash, u32 block); static int ext3_htree_next_block(struct inode *dir, __u32 hash, struct dx_frame *frame, - struct dx_frame *frames, + struct dx_frame *frames, __u32 *start_hash); static struct buffer_head * ext3_dx_find_entry(struct dentry *dentry, struct ext3_dir_entry_2 **res_dir, int *err); @@ -250,7 +250,7 @@ static void dx_show_index (char * label, struct dx_entry *entries) } struct stats -{ +{ unsigned names; unsigned space; unsigned bcount; @@ -464,7 +464,7 @@ static void dx_release (struct dx_frame *frames) */ static int ext3_htree_next_block(struct inode *dir, __u32 hash, struct dx_frame *frame, - struct dx_frame *frames, + struct dx_frame *frames, __u32 *start_hash) { struct dx_frame *p; @@ -632,7 +632,7 @@ int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash, } count += ret; hashval = ~0; - ret = ext3_htree_next_block(dir, HASH_NB_ALWAYS, + ret = ext3_htree_next_block(dir, HASH_NB_ALWAYS, frame, frames, &hashval); *next_hash = hashval; if (ret < 0) { @@ -649,7 +649,7 @@ int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash, break; } dx_release(frames); - dxtrace(printk("Fill tree: returned %d entries, next hash: %x\n", + dxtrace(printk("Fill tree: returned %d entries, next hash: %x\n", count, *next_hash)); return count; errout: @@ -1050,7 +1050,7 @@ struct dentry *ext3_get_parent(struct dentry *child) parent = ERR_PTR(-ENOMEM); } return parent; -} +} #define S_SHIFT 12 static unsigned char ext3_type_by_mode[S_IFMT >> S_SHIFT] = { @@ -1198,7 +1198,7 @@ errout: * add_dirent_to_buf will attempt search the directory block for * space. It will return -ENOSPC if no space is available, and -EIO * and -EEXIST if directory entry already exists. - * + * * NOTE! bh is NOT released in the case where ENOSPC is returned. In * all other cases bh is released. */ @@ -1572,7 +1572,7 @@ cleanup: * ext3_delete_entry deletes a directory entry by merging it with the * previous entry */ -static int ext3_delete_entry (handle_t *handle, +static int ext3_delete_entry (handle_t *handle, struct inode * dir, struct ext3_dir_entry_2 * de_del, struct buffer_head * bh) @@ -1643,12 +1643,12 @@ static int ext3_add_nondir(handle_t *handle, * is so far negative - it has no inode. * * If the create succeeds, we fill in the inode information - * with d_instantiate(). + * with d_instantiate(). */ static int ext3_create (struct inode * dir, struct dentry * dentry, int mode, struct nameidata *nd) { - handle_t *handle; + handle_t *handle; struct inode * inode; int err, retries = 0; @@ -1813,7 +1813,7 @@ static int empty_dir (struct inode * inode) de1 = (struct ext3_dir_entry_2 *) ((char *) de + le16_to_cpu(de->rec_len)); if (le32_to_cpu(de->inode) != inode->i_ino || - !le32_to_cpu(de1->inode) || + !le32_to_cpu(de1->inode) || strcmp (".", de->name) || strcmp ("..", de1->name)) { ext3_warning (inode->i_sb, "empty_dir", @@ -1883,7 +1883,7 @@ int ext3_orphan_add(handle_t *handle, struct inode *inode) * being truncated, or files being unlinked. */ /* @@@ FIXME: Observation from aviro: - * I think I can trigger J_ASSERT in ext3_orphan_add(). We block + * I think I can trigger J_ASSERT in ext3_orphan_add(). We block * here (on lock_super()), so race with ext3_link() which might bump * ->i_nlink. For, say it, character device. Not a regular file, * not a directory, not a symlink and ->i_nlink > 0. @@ -2393,4 +2393,4 @@ struct inode_operations ext3_special_inode_operations = { .removexattr = generic_removexattr, #endif .permission = ext3_permission, -}; +}; diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 3559086eee5..4b95bfe4c8f 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -62,13 +62,13 @@ static void ext3_unlockfs(struct super_block *sb); static void ext3_write_super (struct super_block * sb); static void ext3_write_super_lockfs(struct super_block *sb); -/* +/* * Wrappers for journal_start/end. * * The only special thing we need to do here is to make sure that all * journal_end calls result in the superblock being marked dirty, so * that sync() will call the filesystem's write_super callback if - * appropriate. + * appropriate. */ handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks) { @@ -90,11 +90,11 @@ handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks) return journal_start(journal, nblocks); } -/* +/* * The only special thing we need to do here is to make sure that all * journal_stop calls result in the superblock being marked dirty, so * that sync() will call the filesystem's write_super callback if - * appropriate. + * appropriate. */ int __ext3_journal_stop(const char *where, handle_t *handle) { @@ -369,7 +369,7 @@ static void dump_orphan_list(struct super_block *sb, struct ext3_sb_info *sbi) { struct list_head *l; - printk(KERN_ERR "sb orphan head is %d\n", + printk(KERN_ERR "sb orphan head is %d\n", le32_to_cpu(sbi->s_es->s_last_orphan)); printk(KERN_ERR "sb_info orphan list:\n"); @@ -378,7 +378,7 @@ static void dump_orphan_list(struct super_block *sb, struct ext3_sb_info *sbi) printk(KERN_ERR " " "inode %s:%ld at %p: mode %o, nlink %d, next %d\n", inode->i_sb->s_id, inode->i_ino, inode, - inode->i_mode, inode->i_nlink, + inode->i_mode, inode->i_nlink, NEXT_ORPHAN(inode)); } } @@ -475,7 +475,7 @@ static void init_once(void * foo, kmem_cache_t * cachep, unsigned long flags) inode_init_once(&ei->vfs_inode); } } - + static int init_inodecache(void) { ext3_inode_cachep = kmem_cache_create("ext3_inode_cache", @@ -1483,7 +1483,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) (EXT3_HAS_COMPAT_FEATURE(sb, ~0U) || EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) || EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U))) - printk(KERN_WARNING + printk(KERN_WARNING "EXT3-fs warning: feature flags set on rev 0 fs, " "running e2fsck is recommended\n"); /* @@ -1509,7 +1509,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) if (blocksize < EXT3_MIN_BLOCK_SIZE || blocksize > EXT3_MAX_BLOCK_SIZE) { - printk(KERN_ERR + printk(KERN_ERR "EXT3-fs: Unsupported filesystem blocksize %d on %s.\n", blocksize, sb->s_id); goto failed_mount; @@ -1533,14 +1533,14 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize; bh = sb_bread(sb, logic_sb_block); if (!bh) { - printk(KERN_ERR + printk(KERN_ERR "EXT3-fs: Can't read superblock on 2nd try.\n"); goto failed_mount; } es = (struct ext3_super_block *)(((char *)bh->b_data) + offset); sbi->s_es = es; if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) { - printk (KERN_ERR + printk (KERN_ERR "EXT3-fs: Magic mismatch, very weird !\n"); goto failed_mount; } @@ -1820,7 +1820,7 @@ out_fail: /* * Setup any per-fs journal parameters now. We'll do this both on * initial mount, once the journal has been initialised but before we've - * done any recovery; and again on any subsequent remount. + * done any recovery; and again on any subsequent remount. */ static void ext3_init_journal_params(struct super_block *sb, journal_t *journal) { |