diff options
Diffstat (limited to 'drivers')
32 files changed, 546 insertions, 154 deletions
diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c index 23960cb6eaa..41c26e75645 100644 --- a/drivers/isdn/hardware/eicon/maintidi.c +++ b/drivers/isdn/hardware/eicon/maintidi.c @@ -959,8 +959,9 @@ static int process_idi_event (diva_strace_context_t* pLib, } if (!strncmp("State\\Layer2 No1", path, pVar->path_length)) { char* tmp = &pLib->lines[0].pInterface->Layer2[0]; - dword l2_state; - diva_strace_read_uint (pVar, &l2_state); + dword l2_state; + if (diva_strace_read_uint(pVar, &l2_state)) + return -1; switch (l2_state) { case 0: diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c index 27d5dd68f4f..ae89fb89da6 100644 --- a/drivers/isdn/hardware/eicon/message.c +++ b/drivers/isdn/hardware/eicon/message.c @@ -2692,7 +2692,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, if (!(fax_control_bits & T30_CONTROL_BIT_MORE_DOCUMENTS) || (fax_feature_bits & T30_FEATURE_BIT_MORE_DOCUMENTS)) { - len = (byte)(&(((T30_INFO *) 0)->universal_6)); + len = offsetof(T30_INFO, universal_6); fax_info_change = false; if (ncpi->length >= 4) { @@ -2754,7 +2754,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, for (i = 0; i < w; i++) ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id[i] = fax_parms[4].info[1+i]; ((T30_INFO *)(plci->fax_connect_info_buffer))->head_line_len = 0; - len = (byte)(((T30_INFO *) 0)->station_id + 20); + len = offsetof(T30_INFO, station_id) + 20; w = fax_parms[5].length; if (w > 20) w = 20; @@ -2788,7 +2788,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, } else { - len = (byte)(&(((T30_INFO *) 0)->universal_6)); + len = offsetof(T30_INFO, universal_6); } fax_info_change = true; @@ -2892,7 +2892,7 @@ static byte connect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_ENABLE_NSF) && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_NEGOTIATE_RESP)) { - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; if (plci->fax_connect_info_length < len) { ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0; @@ -3802,7 +3802,7 @@ static byte manufacturer_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, break; } ncpi = &m_parms[1]; - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; if (plci->fax_connect_info_length < len) { ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0; @@ -6844,7 +6844,7 @@ static void nl_ind(PLCI *plci) if ((plci->requested_options_conn | plci->requested_options | a->requested_options_table[plci->appl->Id-1]) & ((1L << PRIVATE_FAX_SUB_SEP_PWD) | (1L << PRIVATE_FAX_NONSTANDARD))) { - i = ((word)(((T30_INFO *) 0)->station_id + 20)) + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len; + i = offsetof(T30_INFO, station_id) + 20 + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len; while (i < plci->NL.RBuffer->length) plci->ncpi_buffer[++len] = plci->NL.RBuffer->P[i++]; } @@ -7236,7 +7236,7 @@ static void nl_ind(PLCI *plci) { plci->RData[1].P = plci->RData[0].P; plci->RData[1].PLength = plci->RData[0].PLength; - plci->RData[0].P = v120_header_buffer + (-((int) v120_header_buffer) & 3); + plci->RData[0].P = v120_header_buffer + (-((unsigned long)v120_header_buffer) & 3); if ((plci->NL.RBuffer->P[0] & V120_HEADER_EXTEND_BIT) || (plci->NL.RLength == 1)) plci->RData[0].PLength = 1; else @@ -8473,7 +8473,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp) fax_control_bits |= T30_CONTROL_BIT_ACCEPT_SEL_POLLING; } len = nlc[0]; - pos = ((byte)(((T30_INFO *) 0)->station_id + 20)); + pos = offsetof(T30_INFO, station_id) + 20; if (pos < plci->fax_connect_info_length) { for (i = 1 + plci->fax_connect_info_buffer[pos]; i != 0; i--) @@ -8525,7 +8525,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp) } PUT_WORD(&(((T30_INFO *)&nlc[1])->control_bits_low), fax_control_bits); - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; for (i = 0; i < len; i++) plci->fax_connect_info_buffer[i] = nlc[1+i]; ((T30_INFO *) plci->fax_connect_info_buffer)->head_line_len = 0; diff --git a/drivers/isdn/hisax/amd7930_fn.c b/drivers/isdn/hisax/amd7930_fn.c index bf526a7a63a..d6fdf1f6675 100644 --- a/drivers/isdn/hisax/amd7930_fn.c +++ b/drivers/isdn/hisax/amd7930_fn.c @@ -594,6 +594,7 @@ Amd7930_l1hw(struct PStack *st, int pr, void *arg) if (cs->debug & L1_DEB_WARN) debugl1(cs, "Amd7930: l1hw: l2l1 tx_skb exist this shouldn't happen"); skb_queue_tail(&cs->sq, skb); + spin_unlock_irqrestore(&cs->lock, flags); break; } if (cs->debug & DEB_DLOG_HEX) diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c index 018bd293e58..0b0c2e5d806 100644 --- a/drivers/isdn/hisax/diva.c +++ b/drivers/isdn/hisax/diva.c @@ -382,7 +382,7 @@ MemwaitforXFW(struct IsdnCardState *cs, int hscx) { int to = 50; - while ((!(MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) { + while (((MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) { udelay(1); to--; } diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 9de54202c90..a420b64472e 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -817,8 +817,8 @@ collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish) } /* we have a complete hdlc packet */ if (finish) { - if ((!fifo->skbuff->data[fifo->skbuff->len - 1]) - && (fifo->skbuff->len > 3)) { + if (fifo->skbuff->len > 3 && + !fifo->skbuff->data[fifo->skbuff->len - 1]) { if (fifon == HFCUSB_D_RX) { DBG(HFCUSB_DBG_DCHANNEL, diff --git a/drivers/isdn/hisax/hscx_irq.c b/drivers/isdn/hisax/hscx_irq.c index 7b1ad5e4ecd..2387d76c721 100644 --- a/drivers/isdn/hisax/hscx_irq.c +++ b/drivers/isdn/hisax/hscx_irq.c @@ -32,7 +32,7 @@ waitforXFW(struct IsdnCardState *cs, int hscx) { int to = 50; - while ((!(READHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) { + while (((READHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) { udelay(1); to--; } diff --git a/drivers/isdn/hisax/icc.c b/drivers/isdn/hisax/icc.c index 9aba646ba22..c80cbb8a2ef 100644 --- a/drivers/isdn/hisax/icc.c +++ b/drivers/isdn/hisax/icc.c @@ -468,6 +468,7 @@ ICC_l1hw(struct PStack *st, int pr, void *arg) if (cs->debug & L1_DEB_WARN) debugl1(cs, " l2l1 tx_skb exist this shouldn't happen"); skb_queue_tail(&cs->sq, skb); + spin_unlock_irqrestore(&cs->lock, flags); break; } if (cs->debug & DEB_DLOG_HEX) diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c index 3e1532a180f..0d05ec43012 100644 --- a/drivers/isdn/mISDN/stack.c +++ b/drivers/isdn/mISDN/stack.c @@ -364,7 +364,7 @@ add_layer2(struct mISDNchannel *ch, struct mISDNstack *st) static int st_own_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg) { - if (!ch->st || ch->st->layer1) + if (!ch->st || !ch->st->layer1) return -EINVAL; return ch->st->layer1->ctrl(ch->st->layer1, cmd, arg); } diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 76410c1d566..69dc017c814 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -68,7 +68,7 @@ enum { #define CQE_STATUS_COMPL_MASK 0xFFFF #define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */ #define CQE_STATUS_EXTD_MASK 0xFFFF -#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */ +#define CQE_STATUS_EXTD_SHIFT 16 /* bits 16 - 31 */ struct be_mcc_compl { u32 status; /* dword 0 */ diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index f1b09c0992b..79ce8e857ea 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2217,7 +2217,7 @@ void emac_poll_controller(struct net_device *ndev) struct emac_priv *priv = netdev_priv(ndev); emac_int_disable(priv); - emac_irq(ndev->irq, priv); + emac_irq(ndev->irq, ndev); emac_int_enable(priv); } #endif diff --git a/drivers/net/e100.c b/drivers/net/e100.c index f428c5f72f1..7462fdfd7f9 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1438,19 +1438,31 @@ static int e100_phy_init(struct nic *nic) } else DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id); - /* Isolate all the PHY ids */ - for (addr = 0; addr < 32; addr++) - mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); - /* Select the discovered PHY */ - bmcr &= ~BMCR_ISOLATE; - mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr); - /* Get phy ID */ id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1); id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2); nic->phy = (u32)id_hi << 16 | (u32)id_lo; DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy); + /* Select the phy and isolate the rest */ + for (addr = 0; addr < 32; addr++) { + if (addr != nic->mii.phy_id) { + mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); + } else if (nic->phy != phy_82552_v) { + bmcr = mdio_read(netdev, addr, MII_BMCR); + mdio_write(netdev, addr, MII_BMCR, + bmcr & ~BMCR_ISOLATE); + } + } + /* + * Workaround for 82552: + * Clear the ISOLATE bit on selected phy_id last (mirrored on all + * other phy_id's) using bmcr value from addr discovery loop above. + */ + if (nic->phy == phy_82552_v) + mdio_write(netdev, nic->mii.phy_id, MII_BMCR, + bmcr & ~BMCR_ISOLATE); + /* Handle National tx phys */ #define NCS_PHY_MODEL_MASK 0xFFF0FFFF if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) { diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index c0f185beb8b..1190167a8b3 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -76,6 +76,7 @@ /* Extended Device Control */ #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */ #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ +#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 @@ -347,6 +348,7 @@ /* Extended Configuration Control and Size */ #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 #define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008 #define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16 diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 08a4f9dd20e..00989c5534c 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -141,6 +141,20 @@ struct e1000_info; #define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */ #define HV_TNCRS_LOWER PHY_REG(778, 30) +/* BM PHY Copper Specific Status */ +#define BM_CS_STATUS 17 +#define BM_CS_STATUS_LINK_UP 0x0400 +#define BM_CS_STATUS_RESOLVED 0x0800 +#define BM_CS_STATUS_SPEED_MASK 0xC000 +#define BM_CS_STATUS_SPEED_1000 0x8000 + +/* 82577 Mobile Phy Status Register */ +#define HV_M_STATUS 26 +#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000 +#define HV_M_STATUS_SPEED_MASK 0x0300 +#define HV_M_STATUS_SPEED_1000 0x0200 +#define HV_M_STATUS_LINK_UP 0x0040 + enum e1000_boards { board_82571, board_82572, diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 7b05cf47f7f..aaea41ef794 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -903,6 +903,7 @@ struct e1000_shadow_ram { struct e1000_dev_spec_ich8lan { bool kmrn_lock_loss_workaround_enabled; struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS]; + bool nvm_k1_enabled; }; struct e1000_hw { diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index b6388b9535f..51ddb04ab19 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -124,11 +124,25 @@ #define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ +/* SMBus Address Phy Register */ +#define HV_SMB_ADDR PHY_REG(768, 26) +#define HV_SMB_ADDR_PEC_EN 0x0200 +#define HV_SMB_ADDR_VALID 0x0080 + +/* Strapping Option Register - RO */ +#define E1000_STRAP 0x0000C +#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 +#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 + /* OEM Bits Phy Register */ #define HV_OEM_BITS PHY_REG(768, 25) #define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ +#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ #define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ +#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ +#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -208,6 +222,9 @@ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); static s32 e1000_led_on_pchlan(struct e1000_hw *hw); static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); +static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); +static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -483,14 +500,6 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) goto out; } - if (hw->mac.type == e1000_pchlan) { - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_K1_CONFIG, - E1000_KMRNCTRLSTA_K1_ENABLE); - if (ret_val) - goto out; - } - /* * First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex @@ -500,6 +509,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) goto out; + if (hw->mac.type == e1000_pchlan) { + ret_val = e1000_k1_gig_workaround_hv(hw, link); + if (ret_val) + goto out; + } + if (!link) goto out; /* No link detected */ @@ -794,6 +809,326 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw) } /** + * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration + * @hw: pointer to the HW structure + * + * SW should configure the LCD from the NVM extended configuration region + * as a workaround for certain parts. + **/ +static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask; + s32 ret_val; + u16 word_addr, reg_data, reg_addr, phy_page = 0; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + + /* + * Initialize the PHY from the NVM on ICH platforms. This + * is needed due to an issue where the NVM configuration is + * not properly autoloaded after power transitions. + * Therefore, after each PHY reset, we will load the + * configuration data out of the NVM manually. + */ + if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) || + (hw->mac.type == e1000_pchlan)) { + struct e1000_adapter *adapter = hw->adapter; + + /* Check if SW needs to configure the PHY */ + if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || + (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) || + (hw->mac.type == e1000_pchlan)) + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; + else + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; + + data = er32(FEXTNVM); + if (!(data & sw_cfg_mask)) + goto out; + + /* Wait for basic configuration completes before proceeding */ + e1000_lan_init_done_ich8lan(hw); + + /* + * Make sure HW does not configure LCD from PHY + * extended configuration before SW configuration + */ + data = er32(EXTCNF_CTRL); + if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) + goto out; + + cnf_size = er32(EXTCNF_SIZE); + cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; + cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; + if (!cnf_size) + goto out; + + cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; + cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; + + if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && + (hw->mac.type == e1000_pchlan)) { + /* + * HW configures the SMBus address and LEDs when the + * OEM and LCD Write Enable bits are set in the NVM. + * When both NVM bits are cleared, SW will configure + * them instead. + */ + data = er32(STRAP); + data &= E1000_STRAP_SMBUS_ADDRESS_MASK; + reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT; + reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, + reg_data); + if (ret_val) + goto out; + + data = er32(LEDCTL); + ret_val = e1000_write_phy_reg_hv_locked(hw, + HV_LED_CONFIG, + (u16)data); + if (ret_val) + goto out; + } + /* Configure LCD from extended configuration region. */ + + /* cnf_base_addr is in DWORD */ + word_addr = (u16)(cnf_base_addr << 1); + + for (i = 0; i < cnf_size; i++) { + ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, + ®_data); + if (ret_val) + goto out; + + ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1), + 1, ®_addr); + if (ret_val) + goto out; + + /* Save off the PHY page for future writes. */ + if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { + phy_page = reg_data; + continue; + } + + reg_addr &= PHY_REG_MASK; + reg_addr |= phy_page; + + ret_val = phy->ops.write_phy_reg_locked(hw, + (u32)reg_addr, + reg_data); + if (ret_val) + goto out; + } + } + +out: + hw->phy.ops.release_phy(hw); + return ret_val; +} + +/** + * e1000_k1_gig_workaround_hv - K1 Si workaround + * @hw: pointer to the HW structure + * @link: link up bool flag + * + * If K1 is enabled for 1Gbps, the MAC might stall when transitioning + * from a lower speed. This workaround disables K1 whenever link is at 1Gig + * If link is down, the function will restore the default K1 setting located + * in the NVM. + **/ +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) +{ + s32 ret_val = 0; + u16 status_reg = 0; + bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled; + + if (hw->mac.type != e1000_pchlan) + goto out; + + /* Wrap the whole flow with the sw flag */ + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + + /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */ + if (link) { + if (hw->phy.type == e1000_phy_82578) { + ret_val = hw->phy.ops.read_phy_reg_locked(hw, + BM_CS_STATUS, + &status_reg); + if (ret_val) + goto release; + + status_reg &= BM_CS_STATUS_LINK_UP | + BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_MASK; + + if (status_reg == (BM_CS_STATUS_LINK_UP | + BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_1000)) + k1_enable = false; + } + + if (hw->phy.type == e1000_phy_82577) { + ret_val = hw->phy.ops.read_phy_reg_locked(hw, + HV_M_STATUS, + &status_reg); + if (ret_val) + goto release; + + status_reg &= HV_M_STATUS_LINK_UP | + HV_M_STATUS_AUTONEG_COMPLETE | + HV_M_STATUS_SPEED_MASK; + + if (status_reg == (HV_M_STATUS_LINK_UP | + HV_M_STATUS_AUTONEG_COMPLETE | + HV_M_STATUS_SPEED_1000)) + k1_enable = false; + } + + /* Link stall fix for link up */ + ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + 0x0100); + if (ret_val) + goto release; + + } else { + /* Link stall fix for link down */ + ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + 0x4100); + if (ret_val) + goto release; + } + + ret_val = e1000_configure_k1_ich8lan(hw, k1_enable); + +release: + hw->phy.ops.release_phy(hw); +out: + return ret_val; +} + +/** + * e1000_configure_k1_ich8lan - Configure K1 power state + * @hw: pointer to the HW structure + * @enable: K1 state to configure + * + * Configure the K1 power state based on the provided parameter. + * Assumes semaphore already acquired. + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + **/ +static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) +{ + s32 ret_val = 0; + u32 ctrl_reg = 0; + u32 ctrl_ext = 0; + u32 reg = 0; + u16 kmrn_reg = 0; + + ret_val = e1000e_read_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + &kmrn_reg); + if (ret_val) + goto out; + + if (k1_enable) + kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE; + else + kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE; + + ret_val = e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg); + if (ret_val) + goto out; + + udelay(20); + ctrl_ext = er32(CTRL_EXT); + ctrl_reg = er32(CTRL); + + reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); + reg |= E1000_CTRL_FRCSPD; + ew32(CTRL, reg); + + ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS); + udelay(20); + ew32(CTRL, ctrl_reg); + ew32(CTRL_EXT, ctrl_ext); + udelay(20); + +out: + return ret_val; +} + +/** + * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration + * @hw: pointer to the HW structure + * @d0_state: boolean if entering d0 or d3 device state + * + * SW will configure Gbe Disable and LPLU based on the NVM. The four bits are + * collectively called OEM bits. The OEM Write Enable bit and SW Config bit + * in NVM determines whether HW should configure LPLU and Gbe Disable. + **/ +static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) +{ + s32 ret_val = 0; + u32 mac_reg; + u16 oem_reg; + + if (hw->mac.type != e1000_pchlan) + return ret_val; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + + mac_reg = er32(EXTCNF_CTRL); + if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) + goto out; + + mac_reg = er32(FEXTNVM); + if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M)) + goto out; + + mac_reg = er32(PHY_CTRL); + + ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg); + if (ret_val) + goto out; + + oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU); + + if (d0_state) { + if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE) + oem_reg |= HV_OEM_BITS_GBE_DIS; + + if (mac_reg & E1000_PHY_CTRL_D0A_LPLU) + oem_reg |= HV_OEM_BITS_LPLU; + } else { + if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE) + oem_reg |= HV_OEM_BITS_GBE_DIS; + + if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU) + oem_reg |= HV_OEM_BITS_LPLU; + } + /* Restart auto-neg to activate the bits */ + oem_reg |= HV_OEM_BITS_RESTART_AN; + ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg); + +out: + hw->phy.ops.release_phy(hw); + + return ret_val; +} + + +/** * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be * done after every PHY reset. **/ @@ -833,10 +1168,20 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) ret_val = hw->phy.ops.acquire_phy(hw); if (ret_val) return ret_val; + hw->phy.addr = 1; - e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); + ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); + if (ret_val) + goto out; hw->phy.ops.release_phy(hw); + /* + * Configure the K1 Si workaround during phy reset assuming there is + * link so that it disables K1 if link is in 1Gbps. + */ + ret_val = e1000_k1_gig_workaround_hv(hw, true); + +out: return ret_val; } @@ -882,11 +1227,8 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) { - struct e1000_phy_info *phy = &hw->phy; - u32 i; - u32 data, cnf_size, cnf_base_addr, sw_cfg_mask; - s32 ret_val; - u16 reg, word_addr, reg_data, reg_addr, phy_page = 0; + s32 ret_val = 0; + u16 reg; ret_val = e1000e_phy_hw_reset_generic(hw); if (ret_val) @@ -905,81 +1247,16 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_pchlan) e1e_rphy(hw, BM_WUC, ®); - /* - * Initialize the PHY from the NVM on ICH platforms. This - * is needed due to an issue where the NVM configuration is - * not properly autoloaded after power transitions. - * Therefore, after each PHY reset, we will load the - * configuration data out of the NVM manually. - */ - if (hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) { - struct e1000_adapter *adapter = hw->adapter; - - /* Check if SW needs configure the PHY */ - if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || - (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M)) - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; - else - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; - - data = er32(FEXTNVM); - if (!(data & sw_cfg_mask)) - return 0; - - /* Wait for basic configuration completes before proceeding */ - e1000_lan_init_done_ich8lan(hw); - - /* - * Make sure HW does not configure LCD from PHY - * extended configuration before SW configuration - */ - data = er32(EXTCNF_CTRL); - if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) - return 0; - - cnf_size = er32(EXTCNF_SIZE); - cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; - cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; - if (!cnf_size) - return 0; - - cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; - cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; - - /* Configure LCD from extended configuration region. */ - - /* cnf_base_addr is in DWORD */ - word_addr = (u16)(cnf_base_addr << 1); - - for (i = 0; i < cnf_size; i++) { - ret_val = e1000_read_nvm(hw, - (word_addr + i * 2), - 1, - ®_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_nvm(hw, - (word_addr + i * 2 + 1), - 1, - ®_addr); - if (ret_val) - return ret_val; - - /* Save off the PHY page for future writes. */ - if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { - phy_page = reg_data; - continue; - } - - reg_addr |= phy_page; + /* Configure the LCD with the extended configuration region in NVM */ + ret_val = e1000_sw_lcd_config_ich8lan(hw); + if (ret_val) + goto out; - ret_val = e1e_wphy(hw, (u32)reg_addr, reg_data); - if (ret_val) - return ret_val; - } - } + /* Configure the LCD with the OEM bits in NVM */ + if (hw->mac.type == e1000_pchlan) + ret_val = e1000_oem_bits_config_ich8lan(hw, true); +out: return 0; } @@ -2306,6 +2583,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) { + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; u16 reg; u32 ctrl, icr, kab; s32 ret_val; @@ -2341,6 +2619,18 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ew32(PBS, E1000_PBS_16K); } + if (hw->mac.type == e1000_pchlan) { + /* Save the NVM K1 bit setting*/ + ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, ®); + if (ret_val) + return ret_val; + + if (reg & E1000_NVM_K1_ENABLE) + dev_spec->nvm_k1_enabled = true; + else + dev_spec->nvm_k1_enabled = false; + } + ctrl = er32(CTRL); if (!e1000_check_reset_block(hw)) { @@ -2386,6 +2676,15 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_pchlan) e1e_rphy(hw, BM_WUC, ®); + ret_val = e1000_sw_lcd_config_ich8lan(hw); + if (ret_val) + goto out; + + if (hw->mac.type == e1000_pchlan) { + ret_val = e1000_oem_bits_config_ich8lan(hw, true); + if (ret_val) + goto out; + } /* * For PCH, this write will make sure that any noise * will be detected as a CRC error and be dropped rather than show up @@ -2404,6 +2703,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_pchlan) ret_val = e1000_hv_phy_workarounds_ich8lan(hw); +out: return ret_val; } @@ -2708,14 +3008,6 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed, if (ret_val) return ret_val; - if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) { - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_K1_CONFIG, - E1000_KMRNCTRLSTA_K1_DISABLE); - if (ret_val) - return ret_val; - } - if ((hw->mac.type == e1000_ich8lan) && (hw->phy.type == e1000_phy_igp_3) && (*speed == SPEED_1000)) { diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index f9d33ab05e9..03175b3a2c9 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -95,13 +95,6 @@ static const u16 e1000_igp_2_cable_length_table[] = /* BM PHY Copper Specific Control 1 */ #define BM_CS_CTRL1 16 -/* BM PHY Copper Specific Status */ -#define BM_CS_STATUS 17 -#define BM_CS_STATUS_LINK_UP 0x0400 -#define BM_CS_STATUS_RESOLVED 0x0800 -#define BM_CS_STATUS_SPEED_MASK 0xC000 -#define BM_CS_STATUS_SPEED_1000 0x8000 - #define HV_MUX_DATA_CTRL PHY_REG(776, 16) #define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400 #define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004 @@ -563,7 +556,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) } /** - * e1000_read_kmrn_reg_locked - Read kumeran register + * e1000e_read_kmrn_reg_locked - Read kumeran register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data @@ -572,7 +565,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) * information retrieved is stored in data. * Assumes semaphore already acquired. **/ -s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) +s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) { return __e1000_read_kmrn_reg(hw, offset, data, true); } @@ -631,7 +624,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) } /** - * e1000_write_kmrn_reg_locked - Write kumeran register + * e1000e_write_kmrn_reg_locked - Write kumeran register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset @@ -639,7 +632,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) * Write the data to PHY register at the offset using the kumeran interface. * Assumes semaphore already acquired. **/ -s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) +s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) { return __e1000_write_kmrn_reg(hw, offset, data, true); } diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index bd3447f0490..94c9ad2746b 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1760,7 +1760,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"), PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b), PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 1f7946c7d4e..1b0aa4cf89b 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3379,7 +3379,7 @@ static u16 rtl_rw_cpluscmd(void __iomem *ioaddr) static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz) { /* Low hurts. Let's disable the filtering. */ - RTL_W16(RxMaxSize, rx_buf_sz); + RTL_W16(RxMaxSize, rx_buf_sz + 1); } static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1729ebf5de9..a3d99913f18 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4651,6 +4651,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_netdev; } + netif_carrier_off(dev); + netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT); err = request_irq(pdev->irq, sky2_intr, diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index 525bbc5b9c9..6a3c7510afd 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -1143,9 +1143,16 @@ static void dir_open_adapter (struct net_device *dev) } else { char **prphase = printphase; char **prerror = printerror; + int pnr = err / 16 - 1; + int enr = err % 16 - 1; DPRINTK("TR Adapter misc open failure, error code = "); - printk("0x%x, Phase: %s, Error: %s\n", - err, prphase[err/16 -1], prerror[err%16 -1]); + if (pnr < 0 || pnr >= ARRAY_SIZE(printphase) || + enr < 0 || + enr >= ARRAY_SIZE(printerror)) + printk("0x%x, invalid Phase/Error.", err); + else + printk("0x%x, Phase: %s, Error: %s\n", err, + prphase[pnr], prerror[enr]); printk(" retrying after %ds delay...\n", TR_RETRY_INTERVAL/HZ); } diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index c47237c2d63..32d93564a74 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -174,7 +174,7 @@ config USB_NET_CDCETHER * Ericsson Mobile Broadband Module (all variants) * Motorola (DM100 and SB4100) * Broadcom Cable Modem (reference design) - * Toshiba (PCX1100U and F3507g) + * Toshiba (PCX1100U and F3507g/F3607gw) * ... This driver creates an interface named "ethX", where X depends on diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 71e65fc10e6..71d7ff3de99 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -552,20 +552,60 @@ static const struct usb_device_id products [] = { USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &mbm_info, }, { - /* Ericsson F3307 */ + /* Ericsson F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &mbm_info, +}, { + /* Ericsson F3607gw ver 3 */ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &mbm_info, }, { + /* Ericsson F3307 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &mbm_info, +}, { + /* Ericsson F3307 ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &mbm_info, +}, { + /* Ericsson C3607w */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &mbm_info, +}, { /* Toshiba F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &mbm_info, }, { + /* Toshiba F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &mbm_info, +}, { + /* Toshiba F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &mbm_info, +}, { /* Dell F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &mbm_info, +}, { + /* Dell F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &mbm_info, +}, { + /* Dell F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &mbm_info, }, { }, // END }; diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 95274678fe4..22a8ca5d67d 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -996,7 +996,7 @@ static unsigned int features[] = { VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, }; -static struct virtio_driver virtio_net = { +static struct virtio_driver virtio_net_driver = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), .driver.name = KBUILD_MODNAME, @@ -1009,12 +1009,12 @@ static struct virtio_driver virtio_net = { static int __init init(void) { - return register_virtio_driver(&virtio_net); + return register_virtio_driver(&virtio_net_driver); } static void __exit fini(void) { - unregister_virtio_driver(&virtio_net); + unregister_virtio_driver(&virtio_net_driver); } module_init(init); module_exit(fini); diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 063936423d8..bb72b46567f 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -679,7 +679,7 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc, return rate; if (rate_table->info[rate].valid_single_stream && - !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)); + !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)) return rate; /* This should not happen */ diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 8701034569f..de4e804bedf 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1157,8 +1157,9 @@ struct b43_dmaring *parse_cookie(struct b43_wldev *dev, u16 cookie, int *slot) } static int dma_tx_fragment(struct b43_dmaring *ring, - struct sk_buff *skb) + struct sk_buff **in_skb) { + struct sk_buff *skb = *in_skb; const struct b43_dma_ops *ops = ring->ops; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); u8 *header; @@ -1224,8 +1225,14 @@ static int dma_tx_fragment(struct b43_dmaring *ring, } memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len); + memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb)); + bounce_skb->dev = skb->dev; + skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb)); + info = IEEE80211_SKB_CB(bounce_skb); + dev_kfree_skb_any(skb); skb = bounce_skb; + *in_skb = bounce_skb; meta->skb = skb; meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1); if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { @@ -1355,7 +1362,11 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb) * static, so we don't need to store it per frame. */ ring->queue_prio = skb_get_queue_mapping(skb); - err = dma_tx_fragment(ring, skb); + /* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing + * into the skb data or cb now. */ + hdr = NULL; + info = NULL; + err = dma_tx_fragment(ring, &skb); if (unlikely(err == -ENOKEY)) { /* Drop this packet, as we don't have the encryption key * anymore and must not transmit it unencrypted. */ diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 240cff1e697..a741d37fd96 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6325,8 +6325,10 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, fail: if (dev) { - if (registered) + if (registered) { + unregister_ieee80211(priv->ieee); unregister_netdev(dev); + } ipw2100_hw_stop_adapter(priv); @@ -6383,6 +6385,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) /* Unregister the device first - this results in close() * being called if the device is open. If we free storage * first, then close() will crash. */ + unregister_ieee80211(priv->ieee); unregister_netdev(dev); /* ipw2100_down will ensure that there is no more pending work diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 61ef8904af9..4539e63e978 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11822,6 +11822,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, if (err) { IPW_ERROR("Failed to register promiscuous network " "device (error %d).\n", err); + unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); goto out_remove_sysfs; } @@ -11872,6 +11873,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) mutex_unlock(&priv->mutex); + unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); if (priv->rxq) { diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index bf45391172f..f42ade6c2d3 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -1020,6 +1020,7 @@ static inline int libipw_is_cck_rate(u8 rate) /* ieee80211.c */ extern void free_ieee80211(struct net_device *dev, int monitor); extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); +extern void unregister_ieee80211(struct libipw_device *ieee); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index a0e9f6aed7d..be5b809ec97 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -235,16 +235,19 @@ void free_ieee80211(struct net_device *dev, int monitor) libipw_networks_free(ieee); /* free cfg80211 resources */ - if (!monitor) { - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); + if (!monitor) wiphy_free(ieee->wdev.wiphy); - } free_netdev(dev); } +void unregister_ieee80211(struct libipw_device *ieee) +{ + wiphy_unregister(ieee->wdev.wiphy); + kfree(ieee->a_band.channels); + kfree(ieee->bg_band.channels); +} + #ifdef CONFIG_LIBIPW_DEBUG static int debug = 0; @@ -330,3 +333,4 @@ module_init(libipw_init); EXPORT_SYMBOL(alloc_ieee80211); EXPORT_SYMBOL(free_ieee80211); +EXPORT_SYMBOL(unregister_ieee80211); diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index a8262dea9b1..f12d667ba10 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -511,7 +511,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, /* Fill the receive configuration URB and initialise the Rx call back */ usb_fill_bulk_urb(cardp->rx_urb, cardp->udev, usb_rcvbulkpipe(cardp->udev, cardp->ep_in), - (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET), + skb->data + IPFIELD_ALIGN_OFFSET, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index b8f5ee33445..14e7bb21007 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2389,10 +2389,13 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) }, /* MSI */ + { USB_DEVICE(0x0db0, 0x4600), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Ovislink */ + { USB_DEVICE(0x1b75, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) }, /* Ralink */ { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) }, @@ -2420,6 +2423,8 @@ static struct usb_device_id rt73usb_device_table[] = { /* Planex */ { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) }, + /* WideTell */ + { USB_DEVICE(0x7167, 0x3840), USB_DEVICE_DATA(&rt73usb_ops) }, /* Zcom */ { USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) }, /* ZyXEL */ diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index ff4617e2142..7c7914f5fa0 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -879,10 +879,10 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), |