diff options
Diffstat (limited to 'drivers')
33 files changed, 8705 insertions, 643 deletions
diff --git a/drivers/base/Makefile b/drivers/base/Makefile index 5aa2d703d19..4e22ce3ed73 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -21,6 +21,7 @@ endif obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o obj-$(CONFIG_REGMAP) += regmap/ obj-$(CONFIG_SOC_BUS) += soc.o +obj-$(CONFIG_PINCTRL) += pinctrl.o ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG diff --git a/drivers/base/dd.c b/drivers/base/dd.c index e3bbed8a617..656310156dd 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -24,6 +24,7 @@ #include <linux/wait.h> #include <linux/async.h> #include <linux/pm_runtime.h> +#include <linux/pinctrl/devinfo.h> #include "base.h" #include "power/power.h" @@ -269,6 +270,12 @@ static int really_probe(struct device *dev, struct device_driver *drv) WARN_ON(!list_empty(&dev->devres_head)); dev->driver = drv; + + /* If using pinctrl, bind pins now before probing */ + ret = pinctrl_bind_pins(dev); + if (ret) + goto probe_failed; + if (driver_sysfs_add(dev)) { printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n", __func__, dev_name(dev)); diff --git a/drivers/base/pinctrl.c b/drivers/base/pinctrl.c new file mode 100644 index 00000000000..67a274e8672 --- /dev/null +++ b/drivers/base/pinctrl.c @@ -0,0 +1,69 @@ +/* + * Driver core interface to the pinctrl subsystem. + * + * Copyright (C) 2012 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/device.h> +#include <linux/pinctrl/devinfo.h> +#include <linux/pinctrl/consumer.h> +#include <linux/slab.h> + +/** + * pinctrl_bind_pins() - called by the device core before probe + * @dev: the device that is just about to probe + */ +int pinctrl_bind_pins(struct device *dev) +{ + int ret; + + dev->pins = devm_kzalloc(dev, sizeof(*(dev->pins)), GFP_KERNEL); + if (!dev->pins) + return -ENOMEM; + + dev->pins->p = devm_pinctrl_get(dev); + if (IS_ERR(dev->pins->p)) { + dev_dbg(dev, "no pinctrl handle\n"); + ret = PTR_ERR(dev->pins->p); + goto cleanup_alloc; + } + + dev->pins->default_state = pinctrl_lookup_state(dev->pins->p, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(dev->pins->default_state)) { + dev_dbg(dev, "no default pinctrl state\n"); + ret = 0; + goto cleanup_get; + } + + ret = pinctrl_select_state(dev->pins->p, dev->pins->default_state); + if (ret) { + dev_dbg(dev, "failed to activate default pinctrl state\n"); + goto cleanup_get; + } + + return 0; + + /* + * If no pinctrl handle or default state was found for this device, + * let's explicitly free the pin container in the device, there is + * no point in keeping it around. + */ +cleanup_get: + devm_pinctrl_put(dev->pins->p); +cleanup_alloc: + devm_kfree(dev, dev->pins); + dev->pins = NULL; + + /* Only return deferrals */ + if (ret != -EPROBE_DEFER) + ret = 0; + + return ret; +} diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 682de754d63..e5116fa8514 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -657,12 +657,6 @@ config GPIO_JANZ_TTL This driver provides support for driving the pins in output mode only. Input mode is not supported. -config GPIO_AB8500 - bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions" - depends on AB8500_CORE && BROKEN - help - Select this to enable the AB8500 IC GPIO driver - config GPIO_TPS6586X bool "TPS6586X GPIO" depends on MFD_TPS6586X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index c5aebd008dd..45a388c21d0 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o -obj-$(CONFIG_GPIO_AB8500) += gpio-ab8500.o obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o diff --git a/drivers/gpio/gpio-ab8500.c b/drivers/gpio/gpio-ab8500.c deleted file mode 100644 index 983ad425f0a..00000000000 --- a/drivers/gpio/gpio-ab8500.c +++ /dev/null @@ -1,520 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: BIBEK BASU <bibek.basu@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/mfd/ab8500.h> -#include <linux/mfd/abx500.h> -#include <linux/mfd/ab8500/gpio.h> - -/* - * GPIO registers offset - * Bank: 0x10 - */ -#define AB8500_GPIO_SEL1_REG 0x00 -#define AB8500_GPIO_SEL2_REG 0x01 -#define AB8500_GPIO_SEL3_REG 0x02 -#define AB8500_GPIO_SEL4_REG 0x03 -#define AB8500_GPIO_SEL5_REG 0x04 -#define AB8500_GPIO_SEL6_REG 0x05 - -#define AB8500_GPIO_DIR1_REG 0x10 -#define AB8500_GPIO_DIR2_REG 0x11 -#define AB8500_GPIO_DIR3_REG 0x12 -#define AB8500_GPIO_DIR4_REG 0x13 -#define AB8500_GPIO_DIR5_REG 0x14 -#define AB8500_GPIO_DIR6_REG 0x15 - -#define AB8500_GPIO_OUT1_REG 0x20 -#define AB8500_GPIO_OUT2_REG 0x21 -#define AB8500_GPIO_OUT3_REG 0x22 -#define AB8500_GPIO_OUT4_REG 0x23 -#define AB8500_GPIO_OUT5_REG 0x24 -#define AB8500_GPIO_OUT6_REG 0x25 - -#define AB8500_GPIO_PUD1_REG 0x30 -#define AB8500_GPIO_PUD2_REG 0x31 -#define AB8500_GPIO_PUD3_REG 0x32 -#define AB8500_GPIO_PUD4_REG 0x33 -#define AB8500_GPIO_PUD5_REG 0x34 -#define AB8500_GPIO_PUD6_REG 0x35 - -#define AB8500_GPIO_IN1_REG 0x40 -#define AB8500_GPIO_IN2_REG 0x41 -#define AB8500_GPIO_IN3_REG 0x42 -#define AB8500_GPIO_IN4_REG 0x43 -#define AB8500_GPIO_IN5_REG 0x44 -#define AB8500_GPIO_IN6_REG 0x45 -#define AB8500_GPIO_ALTFUN_REG 0x45 -#define ALTFUN_REG_INDEX 6 -#define AB8500_NUM_GPIO 42 -#define AB8500_NUM_VIR_GPIO_IRQ 16 - -enum ab8500_gpio_action { - NONE, - STARTUP, - SHUTDOWN, - MASK, - UNMASK -}; - -struct ab8500_gpio { - struct gpio_chip chip; - struct ab8500 *parent; - struct device *dev; - struct mutex lock; - u32 irq_base; - enum ab8500_gpio_action irq_action; - u16 rising; - u16 falling; -}; -/** - * to_ab8500_gpio() - get the pointer to ab8500_gpio - * @chip: Member of the structure ab8500_gpio - */ -static inline struct ab8500_gpio *to_ab8500_gpio(struct gpio_chip *chip) -{ - return container_of(chip, struct ab8500_gpio, chip); -} - -static int ab8500_gpio_set_bits(struct gpio_chip *chip, u8 reg, - unsigned offset, int val) -{ - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - u8 pos = offset % 8; - int ret; - - reg = reg + (offset / 8); - ret = abx500_mask_and_set_register_interruptible(ab8500_gpio->dev, - AB8500_MISC, reg, 1 << pos, val << pos); - if (ret < 0) - dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); - return ret; -} -/** - * ab8500_gpio_get() - Get the particular GPIO value - * @chip: Gpio device - * @offset: GPIO number to read - */ -static int ab8500_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - u8 mask = 1 << (offset % 8); - u8 reg = AB8500_GPIO_OUT1_REG + (offset / 8); - int ret; - u8 data; - ret = abx500_get_register_interruptible(ab8500_gpio->dev, AB8500_MISC, - reg, &data); - if (ret < 0) { - dev_err(ab8500_gpio->dev, "%s read failed\n", __func__); - return ret; - } - return (data & mask) >> (offset % 8); -} - -static void ab8500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - int ret; - /* Write the data */ - ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, 1); - if (ret < 0) - dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); -} - -static int ab8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - int ret; - /* set direction as output */ - ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1); - if (ret < 0) - return ret; - /* disable pull down */ - ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1); - if (ret < 0) - return ret; - /* set the output as 1 or 0 */ - return ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); - -} - -static int ab8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - /* set the register as input */ - return ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0); -} - -static int ab8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - /* - * Only some GPIOs are interrupt capable, and they are - * organized in discontiguous clusters: - * - * GPIO6 to GPIO13 - * GPIO24 and GPIO25 - * GPIO36 to GPIO41 - */ - static struct ab8500_gpio_irq_cluster { - int start; - int end; - } clusters[] = { - {.start = 6, .end = 13}, - {.start = 24, .end = 25}, - {.start = 36, .end = 41}, - }; - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - int base = ab8500_gpio->irq_base; - int i; - - for (i = 0; i < ARRAY_SIZE(clusters); i++) { - struct ab8500_gpio_irq_cluster *cluster = &clusters[i]; - - if (offset >= cluster->start && offset <= cluster->end) - return base + offset - cluster->start; - - /* Advance by the number of gpios in this cluster */ - base += cluster->end - cluster->start + 1; - } - - return -EINVAL; -} - -static struct gpio_chip ab8500gpio_chip = { - .label = "ab8500_gpio", - .owner = THIS_MODULE, - .direction_input = ab8500_gpio_direction_input, - .get = ab8500_gpio_get, - .direction_output = ab8500_gpio_direction_output, - .set = ab8500_gpio_set, - .to_irq = ab8500_gpio_to_irq, -}; - -static unsigned int irq_to_rising(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - int new_irq = offset + AB8500_INT_GPIO6R - + ab8500_gpio->parent->irq_base; - return new_irq; -} - -static unsigned int irq_to_falling(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - int new_irq = offset + AB8500_INT_GPIO6F - + ab8500_gpio->parent->irq_base; - return new_irq; - -} - -static unsigned int rising_to_irq(unsigned int irq, void *dev) -{ - struct ab8500_gpio *ab8500_gpio = dev; - int offset = irq - AB8500_INT_GPIO6R - - ab8500_gpio->parent->irq_base ; - int new_irq = offset + ab8500_gpio->irq_base; - return new_irq; -} - -static unsigned int falling_to_irq(unsigned int irq, void *dev) -{ - struct ab8500_gpio *ab8500_gpio = dev; - int offset = irq - AB8500_INT_GPIO6F - - ab8500_gpio->parent->irq_base ; - int new_irq = offset + ab8500_gpio->irq_base; - return new_irq; - -} - -/* - * IRQ handler - */ - -static irqreturn_t handle_rising(int irq, void *dev) -{ - - handle_nested_irq(rising_to_irq(irq , dev)); - return IRQ_HANDLED; -} - -static irqreturn_t handle_falling(int irq, void *dev) -{ - - handle_nested_irq(falling_to_irq(irq, dev)); - return IRQ_HANDLED; -} - -static void ab8500_gpio_irq_lock(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - mutex_lock(&ab8500_gpio->lock); -} - -static void ab8500_gpio_irq_sync_unlock(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - bool rising = ab8500_gpio->rising & BIT(offset); - bool falling = ab8500_gpio->falling & BIT(offset); - int ret; - - switch (ab8500_gpio->irq_action) { - case STARTUP: - if (rising) - ret = request_threaded_irq(irq_to_rising(irq), - NULL, handle_rising, - IRQF_TRIGGER_RISING, - "ab8500-gpio-r", ab8500_gpio); - if (falling) - ret = request_threaded_irq(irq_to_falling(irq), - NULL, handle_falling, - IRQF_TRIGGER_FALLING, - "ab8500-gpio-f", ab8500_gpio); - break; - case SHUTDOWN: - if (rising) - free_irq(irq_to_rising(irq), ab8500_gpio); - if (falling) - free_irq(irq_to_falling(irq), ab8500_gpio); - break; - case MASK: - if (rising) - disable_irq(irq_to_rising(irq)); - if (falling) - disable_irq(irq_to_falling(irq)); - break; - case UNMASK: - if (rising) - enable_irq(irq_to_rising(irq)); - if (falling) - enable_irq(irq_to_falling(irq)); - break; - case NONE: - break; - } - ab8500_gpio->irq_action = NONE; - ab8500_gpio->rising &= ~(BIT(offset)); - ab8500_gpio->falling &= ~(BIT(offset)); - mutex_unlock(&ab8500_gpio->lock); -} - - -static void ab8500_gpio_irq_mask(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = MASK; -} - -static void ab8500_gpio_irq_unmask(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = UNMASK; -} - -static int ab8500_gpio_irq_set_type(unsigned int irq, unsigned int type) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - - if (type == IRQ_TYPE_EDGE_BOTH) { - ab8500_gpio->rising = BIT(offset); - ab8500_gpio->falling = BIT(offset); - } else if (type == IRQ_TYPE_EDGE_RISING) { - ab8500_gpio->rising = BIT(offset); - } else { - ab8500_gpio->falling = BIT(offset); - } - return 0; -} - -unsigned int ab8500_gpio_irq_startup(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = STARTUP; - return 0; -} - -void ab8500_gpio_irq_shutdown(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = SHUTDOWN; -} - -static struct irq_chip ab8500_gpio_irq_chip = { - .name = "ab8500-gpio", - .startup = ab8500_gpio_irq_startup, - .shutdown = ab8500_gpio_irq_shutdown, - .bus_lock = ab8500_gpio_irq_lock, - .bus_sync_unlock = ab8500_gpio_irq_sync_unlock, - .mask = ab8500_gpio_irq_mask, - .unmask = ab8500_gpio_irq_unmask, - .set_type = ab8500_gpio_irq_set_type, -}; - -static int ab8500_gpio_irq_init(struct ab8500_gpio *ab8500_gpio) -{ - u32 base = ab8500_gpio->irq_base; - int irq; - - for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ ; irq++) { - set_irq_chip_data(irq, ab8500_gpio); - set_irq_chip_and_handler(irq, &ab8500_gpio_irq_chip, - handle_simple_irq); - set_irq_nested_thread(irq, 1); -#ifdef CONFIG_ARM - set_irq_flags(irq, IRQF_VALID); -#else - set_irq_noprobe(irq); -#endif - } - - return 0; -} - -static void ab8500_gpio_irq_remove(struct ab8500_gpio *ab8500_gpio) -{ - int base = ab8500_gpio->irq_base; - int irq; - - for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ; irq++) { -#ifdef CONFIG_ARM - set_irq_flags(irq, 0); -#endif - set_irq_chip_and_handler(irq, NULL, NULL); - set_irq_chip_data(irq, NULL); - } -} - -static int ab8500_gpio_probe(struct platform_device *pdev) -{ - struct ab8500_platform_data *ab8500_pdata = - dev_get_platdata(pdev->dev.parent); - struct ab8500_gpio_platform_data *pdata; - struct ab8500_gpio *ab8500_gpio; - int ret; - int i; - - pdata = ab8500_pdata->gpio; - if (!pdata) { - dev_err(&pdev->dev, "gpio platform data missing\n"); - return -ENODEV; - } - - ab8500_gpio = kzalloc(sizeof(struct ab8500_gpio), GFP_KERNEL); - if (ab8500_gpio == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return -ENOMEM; - } - ab8500_gpio->dev = &pdev->dev; - ab8500_gpio->parent = dev_get_drvdata(pdev->dev.parent); - ab8500_gpio->chip = ab8500gpio_chip; - ab8500_gpio->chip.ngpio = AB8500_NUM_GPIO; - ab8500_gpio->chip.dev = &pdev->dev; - ab8500_gpio->chip.base = pdata->gpio_base; - ab8500_gpio->irq_base = pdata->irq_base; - /* initialize the lock */ - mutex_init(&ab8500_gpio->lock); - /* - * AB8500 core will handle and clear the IRQ - * configre GPIO based on config-reg value. - * These values are for selecting the PINs as - * GPIO or alternate function - */ - for (i = AB8500_GPIO_SEL1_REG; i <= AB8500_GPIO_SEL6_REG; i++) { - ret = abx500_set_register_interruptible(ab8500_gpio->dev, - AB8500_MISC, i, - pdata->config_reg[i]); - if (ret < 0) - goto out_free; - } - ret = abx500_set_register_interruptible(ab8500_gpio->dev, AB8500_MISC, - AB8500_GPIO_ALTFUN_REG, - pdata->config_reg[ALTFUN_REG_INDEX]); - if (ret < 0) - goto out_free; - - ret = ab8500_gpio_irq_init(ab8500_gpio); - if (ret) - goto out_free; - ret = gpiochip_add(&ab8500_gpio->chip); - if (ret) { - dev_err(&pdev->dev, "unable to add gpiochip: %d\n", - ret); - goto out_rem_irq; - } - platform_set_drvdata(pdev, ab8500_gpio); - return 0; - -out_rem_irq: - ab8500_gpio_irq_remove(ab8500_gpio); -out_free: - mutex_destroy(&ab8500_gpio->lock); - kfree(ab8500_gpio); - return ret; -} - -/* - * ab8500_gpio_remove() - remove Ab8500-gpio driver - * @pdev : Platform device registered - */ -static int ab8500_gpio_remove(struct platform_device *pdev) -{ - struct ab8500_gpio *ab8500_gpio = platform_get_drvdata(pdev); - int ret; - - ret = gpiochip_remove(&ab8500_gpio->chip); - if (ret < 0) { - dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n", - ret); - return ret; - } - - platform_set_drvdata(pdev, NULL); - mutex_destroy(&ab8500_gpio->lock); - kfree(ab8500_gpio); - - return 0; -} - -static struct platform_driver ab8500_gpio_driver = { - .driver = { - .name = "ab8500-gpio", - .owner = THIS_MODULE, - }, - .probe = ab8500_gpio_probe, - .remove = ab8500_gpio_remove, -}; - -static int __init ab8500_gpio_init(void) -{ - return platform_driver_register(&ab8500_gpio_driver); -} -arch_initcall(ab8500_gpio_init); - -static void __exit ab8500_gpio_exit(void) -{ - platform_driver_unregister(&ab8500_gpio_driver); -} -module_exit(ab8500_gpio_exit); - -MODULE_AUTHOR("BIBEK BASU <bibek.basu@stericsson.com>"); -MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO"); -MODULE_ALIAS("platform:ab8500-gpio"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index d542a141811..25b1dbe8921 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -250,7 +250,7 @@ static void of_gpiochip_add_pin_range(struct gpio_chip *chip) * on the same GPIO chip. */ ret = gpiochip_add_pin_range(chip, - pinctrl_dev_get_name(pctldev), + pinctrl_dev_get_devname(pctldev), 0, /* offset in gpiochip */ pinspec.args[0], pinspec.args[1]); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index a5f3c8ca480..393b0ecf4ca 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -26,6 +26,29 @@ config DEBUG_PINCTRL help Say Y here to add some extra checks and diagnostics to PINCTRL calls. +config PINCTRL_ABX500 + bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions" + depends on AB8500_CORE + select GENERIC_PINCONF + help + Select this to enable the ABx500 family IC GPIO driver + +config PINCTRL_AB8500 + bool "AB8500 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + +config PINCTRL_AB8540 + bool "AB8540 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + +config PINCTRL_AB9540 + bool "AB9540 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + +config PINCTRL_AB8505 + bool "AB8505 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + config PINCTRL_AT91 bool "AT91 pinctrl driver" depends on OF @@ -151,6 +174,11 @@ config PINCTRL_SIRF depends on ARCH_SIRF select PINMUX +config PINCTRL_SUNXI + bool + select PINMUX + select GENERIC_PINCONF + config PINCTRL_TEGRA bool select PINMUX @@ -164,6 +192,10 @@ config PINCTRL_TEGRA30 bool select PINCTRL_TEGRA +config PINCTRL_TEGRA114 + bool + select PINCTRL_TEGRA + config PINCTRL_U300 bool "U300 pin controller driver" depends on ARCH_U300 diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 6e87e52eab5..0fd5f57fcb5 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -9,6 +9,11 @@ ifeq ($(CONFIG_OF),y) obj-$(CONFIG_PINCTRL) += devicetree.o endif obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o +obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o +obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o +obj-$(CONFIG_PINCTRL_AB8540) += pinctrl-ab8540.o +obj-$(CONFIG_PINCTRL_AB9540) += pinctrl-ab9540.o +obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o @@ -30,9 +35,11 @@ obj-$(CONFIG_PINCTRL_PXA168) += pinctrl-pxa168.o obj-$(CONFIG_PINCTRL_PXA910) += pinctrl-pxa910.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_SIRF) += pinctrl-sirf.o +obj-$(CONFIG_PINCTRL_SUNXI) += pinctrl-sunxi.o obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o +obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 59f5a965bdc..b0de6e7f1fd 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -14,6 +14,7 @@ #define pr_fmt(fmt) "pinctrl core: " fmt #include <linux/kernel.h> +#include <linux/kref.h> #include <linux/export.h> #include <linux/init.h> #include <linux/device.h> @@ -31,17 +32,6 @@ #include "pinmux.h" #include "pinconf.h" -/** - * struct pinctrl_maps - a list item containing part of the mapping table - * @node: mapping table list node - * @maps: array of mapping table entries - * @num_maps: the number of entries in @maps - */ -struct pinctrl_maps { - struct list_head node; - struct pinctrl_map const *maps; - unsigned num_maps; -}; static bool pinctrl_dummy_state; @@ -55,13 +45,8 @@ LIST_HEAD(pinctrldev_list); static LIST_HEAD(pinctrl_list); /* List of pinctrl maps (struct pinctrl_maps) */ -static LIST_HEAD(pinctrl_maps); +LIST_HEAD(pinctrl_maps); -#define for_each_maps(_maps_node_, _i_, _map_) \ - list_for_each_entry(_maps_node_, &pinctrl_maps, node) \ - for (_i_ = 0, _map_ = &_maps_node_->maps[_i_]; \ - _i_ < _maps_node_->num_maps; \ - _i_++, _map_ = &_maps_node_->maps[_i_]) /** * pinctrl_provide_dummies() - indicate if pinctrl provides dummy state support @@ -83,6 +68,12 @@ const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev) } EXPORT_SYMBOL_GPL(pinctrl_dev_get_name); +const char *pinctrl_dev_get_devname(struct pinctrl_dev *pctldev) +{ + return dev_name(pctldev->dev); +} +EXPORT_SYMBOL_GPL(pinctrl_dev_get_devname); + void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev) { return pctldev->driver_data; @@ -609,13 +600,16 @@ static int add_setting(struct pinctrl *p, struct pinctrl_map const *map) setting->pctldev = get_pinctrl_dev_from_devname(map->ctrl_dev_name); if (setting->pctldev == NULL) { - dev_info(p->dev, "unknown pinctrl device %s in map entry, deferring probe", - map->ctrl_dev_name); kfree(setting); + /* Do not defer probing of hogs (circular loop) */ + if (!strcmp(map->ctrl_dev_name, map->dev_name)) + return -ENODEV; /* * OK let us guess that the driver is not there yet, and * let's defer obtaining this pinctrl handle to later... */ + dev_info(p->dev, "unknown pinctrl device %s in map entry, deferring probe", + map->ctrl_dev_name); return -EPROBE_DEFER; } @@ -694,11 +688,31 @@ static struct pinctrl *create_pinctrl(struct device *dev) continue; ret = add_setting(p, map); - if (ret < 0) { + /* + * At this point the adding of a setting may: + * + * - Defer, if the pinctrl device is not yet available + * - Fail, if the pinctrl device is not yet available, + * AND the setting is a hog. We cannot defer that, since + * the hog will kick in immediately after the device + * is registered. + * + * If the error returned was not -EPROBE_DEFER then we + * accumulate the errors to see if we end up with + * an -EPROBE_DEFER later, as that is the worst case. + */ + if (ret == -EPROBE_DEFER) { pinctrl_put_locked(p, false); return ERR_PTR(ret); } } + if (ret < 0) { + /* If some other error than deferral occured, return here */ + pinctrl_put_locked(p, false); + return ERR_PTR(ret); + } + + kref_init(&p->users); /* Add the pinctrl handle to the global list */ list_add_tail(&p->node, &pinctrl_list); @@ -713,9 +727,17 @@ static struct pinctrl *pinctrl_get_locked(struct device *dev) if (WARN_ON(!dev)) return ERR_PTR(-EINVAL); + /* + * See if somebody else (such as the device core) has already + * obtained a handle to the pinctrl for this device. In that case, + * return another pointer to it. + */ p = find_pinctrl(dev); - if (p != NULL) - return ERR_PTR(-EBUSY); + if (p != NULL) { + dev_dbg(dev, "obtain a copy of previously claimed pinctrl\n"); + kref_get(&p->users); + return p; + } return create_pinctrl(dev); } |