diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/acpi/video.c | 4 | ||||
-rw-r--r-- | drivers/platform/x86/eeepc-laptop.c | 2 | ||||
-rw-r--r-- | drivers/video/backlight/Kconfig | 33 | ||||
-rw-r--r-- | drivers/video/backlight/Makefile | 4 | ||||
-rw-r--r-- | drivers/video/backlight/adp5520_bl.c | 377 | ||||
-rw-r--r-- | drivers/video/backlight/adx_bl.c | 178 | ||||
-rw-r--r-- | drivers/video/backlight/backlight.c | 42 | ||||
-rw-r--r-- | drivers/video/backlight/hp680_bl.c | 2 | ||||
-rw-r--r-- | drivers/video/backlight/lms283gf05.c | 242 | ||||
-rw-r--r-- | drivers/video/backlight/mbp_nvidia_bl.c | 36 | ||||
-rw-r--r-- | drivers/video/backlight/wm831x_bl.c | 250 |
11 files changed, 1168 insertions, 2 deletions
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 94b1a4c5aba..a4fddb24476 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1986,6 +1986,10 @@ acpi_video_switch_brightness(struct acpi_video_device *device, int event) result = acpi_video_device_lcd_set_level(device, level_next); + if (!result) + backlight_force_update(device->backlight, + BACKLIGHT_UPDATE_HOTKEY); + out: if (result) printk(KERN_ERR PREFIX "Failed to switch the brightness\n"); diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index da3c08b3dcc..749e2102b2b 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -624,7 +624,7 @@ static int notify_brn(void) struct backlight_device *bd = eeepc_backlight_device; if (bd) { int old = bd->props.brightness; - bd->props.brightness = read_brightness(bd); + backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY); return old; } return -1; diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 90861cd9316..09bfa9662e4 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -31,6 +31,13 @@ config LCD_CORGI Say y here to support the LCD panels usually found on SHARP corgi (C7x0) and spitz (Cxx00) models. +config LCD_LMS283GF05 + tristate "Samsung LMS283GF05 LCD" + depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO + help + SPI driver for Samsung LMS283GF05. This provides basic support + for powering the LCD up/down through a sysfs interface. + config LCD_LTV350QV tristate "Samsung LTV350QV LCD Panel" depends on LCD_CLASS_DEVICE && SPI_MASTER @@ -229,3 +236,29 @@ config BACKLIGHT_SAHARA help If you have a Tabletkiosk Sahara Touch-iT, say y to enable the backlight driver. + +config BACKLIGHT_WM831X + tristate "WM831x PMIC Backlight Driver" + depends on BACKLIGHT_CLASS_DEVICE && MFD_WM831X + help + If you have a backlight driven by the ISINK and DCDC of a + WM831x PMIC say y to enable the backlight driver for it. + +config BACKLIGHT_ADX + tristate "Avionic Design Xanthos Backlight Driver" + depends on BACKLIGHT_CLASS_DEVICE && ARCH_PXA_ADX + default y + help + Say Y to enable the backlight driver on Avionic Design Xanthos-based + boards. + +config BACKLIGHT_ADP5520 + tristate "Backlight Driver for ADP5520/ADP5501 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && PMIC_ADP5520 + help + If you have a LCD backlight connected to the BST/BL_SNK output of + ADP5520 or ADP5501, say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp5520_bl. + diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 4eb178c1d68..9a405548874 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o obj-$(CONFIG_LCD_HP700) += jornada720_lcd.o +obj-$(CONFIG_LCD_LMS283GF05) += lms283gf05.o obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o obj-$(CONFIG_LCD_ILI9320) += ili9320.o obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o @@ -24,4 +25,7 @@ obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o +obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o +obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o +obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c new file mode 100644 index 00000000000..ad05da5ba3c --- /dev/null +++ b/drivers/video/backlight/adp5520_bl.c @@ -0,0 +1,377 @@ +/* + * Backlight driver for Analog Devices ADP5520/ADP5501 MFD PMICs + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/mfd/adp5520.h> + +struct adp5520_bl { + struct device *master; + struct adp5520_backlight_platfrom_data *pdata; + struct mutex lock; + unsigned long cached_daylight_max; + int id; + int current_brightness; +}; + +static int adp5520_bl_set(struct backlight_device *bl, int brightness) +{ + struct adp5520_bl *data = bl_get_data(bl); + struct device *master = data->master; + int ret = 0; + + if (data->pdata->en_ambl_sens) { + if ((brightness > 0) && (brightness < ADP5020_MAX_BRIGHTNESS)) { + /* Disable Ambient Light auto adjust */ + ret |= adp5520_clr_bits(master, BL_CONTROL, + BL_AUTO_ADJ); + ret |= adp5520_write(master, DAYLIGHT_MAX, brightness); + } else { + /* + * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust + * restore daylight l3 sysfs brightness + */ + ret |= adp5520_write(master, DAYLIGHT_MAX, + data->cached_daylight_max); + ret |= adp5520_set_bits(master, BL_CONTROL, + BL_AUTO_ADJ); + } + } else { + ret |= adp5520_write(master, DAYLIGHT_MAX, brightness); + } + + if (data->current_brightness && brightness == 0) + ret |= adp5520_set_bits(master, + MODE_STATUS, DIM_EN); + else if (data->current_brightness == 0 && brightness) + ret |= adp5520_clr_bits(master, + MODE_STATUS, DIM_EN); + + if (!ret) + data->current_brightness = brightness; + + return ret; +} + +static int adp5520_bl_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + if (bl->props.power != FB_BLANK_UNBLANK) + brightness = 0; + + if (bl->props.fb_blank != FB_BLANK_UNBLANK) + brightness = 0; + + return adp5520_bl_set(bl, brightness); +} + +static int adp5520_bl_get_brightness(struct backlight_device *bl) +{ + struct adp5520_bl *data = bl_get_data(bl); + int error; + uint8_t reg_val; + + error = adp5520_read(data->master, BL_VALUE, ®_val); + + return error ? data->current_brightness : reg_val; +} + +static struct backlight_ops adp5520_bl_ops = { + .update_status = adp5520_bl_update_status, + .get_brightness = adp5520_bl_get_brightness, +}; + +static int adp5520_bl_setup(struct backlight_device *bl) +{ + struct adp5520_bl *data = bl_get_data(bl); + struct device *master = data->master; + struct adp5520_backlight_platfrom_data *pdata = data->pdata; + int ret = 0; + + ret |= adp5520_write(master, DAYLIGHT_MAX, pdata->l1_daylight_max); + ret |= adp5520_write(master, DAYLIGHT_DIM, pdata->l1_daylight_dim); + + if (pdata->en_ambl_sens) { + data->cached_daylight_max = pdata->l1_daylight_max; + ret |= adp5520_write(master, OFFICE_MAX, pdata->l2_office_max); + ret |= adp5520_write(master, OFFICE_DIM, pdata->l2_office_dim); + ret |= adp5520_write(master, DARK_MAX, pdata->l3_dark_max); + ret |= adp5520_write(master, DARK_DIM, pdata->l3_dark_dim); + ret |= adp5520_write(master, L2_TRIP, pdata->l2_trip); + ret |= adp5520_write(master, L2_HYS, pdata->l2_hyst); + ret |= adp5520_write(master, L3_TRIP, pdata->l3_trip); + ret |= adp5520_write(master, L3_HYS, pdata->l3_hyst); + ret |= adp5520_write(master, ALS_CMPR_CFG, + ALS_CMPR_CFG_VAL(pdata->abml_filt, L3_EN)); + } + + ret |= adp5520_write(master, BL_CONTROL, + BL_CTRL_VAL(pdata->fade_led_law, pdata->en_ambl_sens)); + + ret |= adp5520_write(master, BL_FADE, FADE_VAL(pdata->fade_in, + pdata->fade_out)); + + ret |= adp5520_set_bits(master, MODE_STATUS, BL_EN | DIM_EN); + + return ret; +} + +static ssize_t adp5520_show(struct device *dev, char *buf, int reg) +{ + struct adp5520_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + + mutex_lock(&data->lock); + error = adp5520_read(data->master, reg, ®_val); + mutex_unlock(&data->lock); + + return sprintf(buf, "%u\n", reg_val); +} + +static ssize_t adp5520_store(struct device *dev, const char *buf, + size_t count, int reg) +{ + struct adp5520_bl *data = dev_get_drvdata(dev); + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->lock); + adp5520_write(data->master, reg, val); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t adp5520_bl_dark_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, DARK_MAX); +} + +static ssize_t adp5520_bl_dark_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, DARK_MAX); +} +static DEVICE_ATTR(dark_max, 0664, adp5520_bl_dark_max_show, + adp5520_bl_dark_max_store); + +static ssize_t adp5520_bl_office_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, OFFICE_MAX); +} + +static ssize_t adp5520_bl_office_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, OFFICE_MAX); +} +static DEVICE_ATTR(office_max, 0664, adp5520_bl_office_max_show, + adp5520_bl_office_max_store); + +static ssize_t adp5520_bl_daylight_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, DAYLIGHT_MAX); +} + +static ssize_t adp5520_bl_daylight_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct adp5520_bl *data = dev_get_drvdata(dev); + + strict_strtoul(buf, 10, &data->cached_daylight_max); + return adp5520_store(dev, buf, count, DAYLIGHT_MAX); +} +static DEVICE_ATTR(daylight_max, 0664, adp5520_bl_daylight_max_show, + adp5520_bl_daylight_max_store); + +static ssize_t adp5520_bl_dark_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, DARK_DIM); +} + +static ssize_t adp5520_bl_dark_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, DARK_DIM); +} +static DEVICE_ATTR(dark_dim, 0664, adp5520_bl_dark_dim_show, + adp5520_bl_dark_dim_store); + +static ssize_t adp5520_bl_office_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, OFFICE_DIM); +} + +static ssize_t adp5520_bl_office_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, OFFICE_DIM); +} +static DEVICE_ATTR(office_dim, 0664, adp5520_bl_office_dim_show, + adp5520_bl_office_dim_store); + +static ssize_t adp5520_bl_daylight_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, DAYLIGHT_DIM); +} + +static ssize_t adp5520_bl_daylight_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, DAYLIGHT_DIM); +} +static DEVICE_ATTR(daylight_dim, 0664, adp5520_bl_daylight_dim_show, + adp5520_bl_daylight_dim_store); + +static struct attribute *adp5520_bl_attributes[] = { + &dev_attr_dark_max.attr, + &dev_attr_dark_dim.attr, + &dev_attr_office_max.attr, + &dev_attr_office_dim.attr, + &dev_attr_daylight_max.attr, + &dev_attr_daylight_dim.attr, + NULL +}; + +static const struct attribute_group adp5520_bl_attr_group = { + .attrs = adp5520_bl_attributes, +}; + +static int __devinit adp5520_bl_probe(struct platform_device *pdev) +{ + struct backlight_device *bl; + struct adp5520_bl *data; + int ret = 0; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + data->master = pdev->dev.parent; + data->pdata = pdev->dev.platform_data; + + if (data->pdata == NULL) { + dev_err(&pdev->dev, "missing platform data\n"); + kfree(data); + return -ENODEV; + } + + data->id = pdev->id; + data->current_brightness = 0; + + mutex_init(&data->lock); + + bl = backlight_device_register(pdev->name, data->master, + data, &adp5520_bl_ops); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + kfree(data); + return PTR_ERR(bl); + } + + bl->props.max_brightness = + bl->props.brightness = ADP5020_MAX_BRIGHTNESS; + + if (data->pdata->en_ambl_sens) + ret = sysfs_create_group(&bl->dev.kobj, + &adp5520_bl_attr_group); + + if (ret) { + dev_err(&pdev->dev, "failed to register sysfs\n"); + backlight_device_unregister(bl); + kfree(data); + } + + platform_set_drvdata(pdev, bl); + ret |= adp5520_bl_setup(bl); + backlight_update_status(bl); + + return ret; +} + +static int __devexit adp5520_bl_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct adp5520_bl *data = bl_get_data(bl); + + adp5520_clr_bits(data->master, MODE_STATUS, BL_EN); + + if (data->pdata->en_ambl_sens) + sysfs_remove_group(&bl->dev.kobj, + &adp5520_bl_attr_group); + + backlight_device_unregister(bl); + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int adp5520_bl_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + return adp5520_bl_set(bl, 0); +} + +static int adp5520_bl_resume(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + + backlight_update_status(bl); + return 0; +} +#else +#define adp5520_bl_suspend NULL +#define adp5520_bl_resume NULL +#endif + +static struct platform_driver adp5520_bl_driver = { + .driver = { + .name = "adp5520-backlight", + .owner = THIS_MODULE, + }, + .probe = adp5520_bl_probe, + .remove = __devexit_p(adp5520_bl_remove), + .suspend = adp5520_bl_suspend, + .resume = adp5520_bl_resume, +}; + +static int __init adp5520_bl_init(void) +{ + return platform_driver_register(&adp5520_bl_driver); +} +module_init(adp5520_bl_init); + +static void __exit adp5520_bl_exit(void) +{ + platform_driver_unregister(&adp5520_bl_driver); +} +module_exit(adp5520_bl_exit); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("ADP5520(01) Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:adp5520-backlight"); diff --git a/drivers/video/backlight/adx_bl.c b/drivers/video/backlight/adx_bl.c new file mode 100644 index 00000000000..2c3bdfc620b --- /dev/null +++ b/drivers/video/backlight/adx_bl.c @@ -0,0 +1,178 @@ +/* + * linux/drivers/video/backlight/adx.c + * + * Copyright (C) 2009 Avionic Design GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Written by Thierry Reding <thierry.reding@avionic-design.de> + */ + +#include <linux/backlight.h> +#include <linux/fb.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +/* register definitions */ +#define ADX_BACKLIGHT_CONTROL 0x00 +#define ADX_BACKLIGHT_CONTROL_ENABLE (1 << 0) +#define ADX_BACKLIGHT_BRIGHTNESS 0x08 +#define ADX_BACKLIGHT_STATUS 0x10 +#define ADX_BACKLIGHT_ERROR 0x18 + +struct adxbl { + void __iomem *base; +}; + +static int adx_backlight_update_status(struct backlight_device *bldev) +{ + struct adxbl *bl = bl_get_data(bldev); + u32 value; + + value = bldev->props.brightness; + writel(value, bl->base + ADX_BACKLIGHT_BRIGHTNESS); + + value = readl(bl->base + ADX_BACKLIGHT_CONTROL); + + if (bldev->props.state & BL_CORE_FBBLANK) + value &= ~ADX_BACKLIGHT_CONTROL_ENABLE; + else + value |= ADX_BACKLIGHT_CONTROL_ENABLE; + + writel(value, bl->base + ADX_BACKLIGHT_CONTROL); + + return 0; +} + +static int adx_backlight_get_brightness(struct backlight_device *bldev) +{ + struct adxbl *bl = bl_get_data(bldev); + u32 brightness; + + brightness = readl(bl->base + ADX_BACKLIGHT_BRIGHTNESS); + return brightness & 0xff; +} + +static int adx_backlight_check_fb(struct fb_info *fb) +{ + return 1; +} + +static struct backlight_ops adx_backlight_ops = { + .options = 0, + .update_status = adx_backlight_update_status, + .get_brightness = adx_backlight_get_brightness, + .check_fb = adx_backlight_check_fb, +}; + +static int __devinit adx_backlight_probe(struct platform_device *pdev) +{ + struct backlight_device *bldev; + struct resource *res; + struct adxbl *bl; + int ret = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENXIO; + goto out; + } + + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), res->name); + if (!res) { + ret = -ENXIO; + goto out; + } + + bl = devm_kzalloc(&pdev->dev, sizeof(*bl), GFP_KERNEL); + if (!bl) { + ret = -ENOMEM; + goto out; + } + + bl->base = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!bl->base) { + ret = -ENXIO; + goto out; + } + + bldev = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, bl, + &adx_backlight_ops); + if (!bldev) { + ret = -ENOMEM; + goto out; + } + + bldev->props.max_brightness = 0xff; + bldev->props.brightness = 0xff; + bldev->props.power = FB_BLANK_UNBLANK; + + platform_set_drvdata(pdev, bldev); + +out: + return ret; +} + +static int __devexit adx_backlight_remove(struct platform_device *pdev) +{ + struct backlight_device *bldev; + int ret = 0; + + bldev = platform_get_drvdata(pdev); + bldev->props.power = FB_BLANK_UNBLANK; + bldev->props.brightness = 0xff; + backlight_update_status(bldev); + backlight_device_unregister(bldev); + platform_set_drvdata(pdev, NULL); + + return ret; +} + +#ifdef CONFIG_PM +static int adx_backlight_suspend(struct platform_device *pdev, + pm_message_t state) +{ + return 0; +} + +static int adx_backlight_resume(struct platform_device *pdev) +{ + return 0; +} +#else +#define adx_backlight_suspend NULL +#define adx_backlight_resume NULL +#endif + +static struct platform_driver adx_backlight_driver = { + .probe = adx_backlight_probe, + .remove = __devexit_p(adx_backlight_remove), + .suspend = adx_backlight_suspend, + .resume = adx_backlight_resume, + .driver = { + .name = "adx-backlight", + .owner = THIS_MODULE, + }, +}; + +static int __init adx_backlight_init(void) +{ + return platform_driver_register(&adx_backlight_driver); +} + +static void __exit adx_backlight_exit(void) +{ + platform_driver_unregister(&adx_backlight_driver); +} + +module_init(adx_backlight_init); +module_exit(adx_backlight_exit); + +MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>"); +MODULE_DESCRIPTION("Avionic Design Xanthos Backlight Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index 157057c79ca..6615ac7fa60 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -73,6 +73,27 @@ static inline void backlight_unregister_fb(struct backlight_device *bd) } #endif /* CONFIG_FB */ +static void backlight_generate_event(struct backlight_device *bd, + enum backlight_update_reason reason) +{ + char *envp[2]; + + switch (reason) { + case BACKLIGHT_UPDATE_SYSFS: + envp[0] = "SOURCE=sysfs"; + break; + case BACKLIGHT_UPDATE_HOTKEY: + envp[0] = "SOURCE=hotkey"; + break; + default: + envp[0] = "SOURCE=unknown"; + break; + } + envp[1] = NULL; + kobject_uevent_env(&bd->dev.kobj, KOBJ_CHANGE, envp); + sysfs_notify(&bd->dev.kobj, NULL, "actual_brightness"); +} + static ssize_t backlight_show_power(struct device *dev, struct device_attribute *attr,char *buf) { @@ -142,6 +163,8 @@ static ssize_t backlight_store_brightness(struct device *dev, } mutex_unlock(&bd->ops_lock); + backlight_generate_event(bd, BACKLIGHT_UPDATE_SYSFS); + return rc; } @@ -214,6 +237,25 @@ static struct device_attribute bl_device_attributes[] = { }; /** + * backlight_force_update - tell the backlight subsystem that hardware state + * has changed + * @bd: the backlight device to update + * + * Updates the internal state of the backlight in response to a hardware event, + * and generate a uevent to notify userspace + */ +void backlight_force_update(struct backlight_device *bd, + enum backlight_update_reason reason) +{ + mutex_lock(&bd->ops_lock); + if (bd->ops && bd->ops->get_brightness) + bd->props.brightness = bd->ops->get_brightness(bd); + mutex_unlock(&bd->ops_lock); + backlight_generate_event(bd, reason); +} +EXPORT_SYMBOL(backlight_force_update); + +/** * backlight_device_register - create and register a new object of * backlight_device class. * @name: the name of the new object(must be the same as the name of the diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c index 5be55a20d8c..7fb4eefff80 100644 --- a/drivers/video/backlight/hp680_bl.c +++ b/drivers/video/backlight/hp680_bl.c @@ -103,7 +103,7 @@ static struct backlight_ops hp680bl_ops = { .update_status = hp680bl_set_intensity, }; -static int __init hp680bl_probe(struct platform_device *pdev) +static int __devinit hp680bl_probe(struct platform_device *pdev) { struct backlight_device *bd; diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c new file mode 100644 index 00000000000..447b542a20c --- /dev/null +++ b/drivers/video/backlight/lms283gf05.c @@ -0,0 +1,242 @@ +/* + * lms283gf05.c -- support for Samsung LMS283GF05 LCD + * + * Copyright (c) 2009 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/lcd.h> + +#include <linux/spi/spi.h> +#include <linux/spi/lms283gf05.h> + +struct lms283gf05_state { + struct spi_device *spi; + struct lcd_device *ld; +}; + +struct lms283gf05_seq { + unsigned char reg; + unsigned short value; + unsigned char delay; +}; + +/* Magic sequences supplied by manufacturer, for details refer to datasheet */ +static struct lms283gf05_seq disp_initseq[] = { + /* REG, VALUE, DELAY */ + { 0x07, 0x0000, 0 }, + { 0x13, 0x0000, 10 }, + + { 0x11, 0x3004, 0 }, + { 0x14, 0x200F, 0 }, + { 0x10, 0x1a20, 0 }, + { 0x13, 0x0040, 50 }, + + { 0x13, 0x0060, 0 }, + { 0x13, 0x0070, 200 }, + + { 0x01, 0x0127, 0 }, + { 0x02, 0x0700, 0 }, + { 0x03, 0x1030, 0 }, + { 0x08, 0x0208, 0 }, + { 0x0B, 0x0620, 0 }, + { 0x0C, 0x0110, 0 }, + { 0x30, 0x0120, 0 }, + { 0x31, 0x0127, 0 }, + { 0x32, 0x0000, 0 }, + { 0x33, 0x0503, 0 }, + { 0x34, 0x0727, 0 }, + { 0x35, 0x0124, 0 }, + { 0x36, 0x0706, 0 }, + { 0x37, 0x0701, 0 }, + { 0x38, 0x0F00, 0 }, + { 0x39, 0x0F00, 0 }, + { 0x40, 0x0000, 0 }, + { 0x41, 0x0000, 0 }, + { 0x42, 0x013f, 0 }, + { 0x43, 0x0000, 0 }, + { 0x44, 0x013f, 0 }, + { 0x45, 0x0000, 0 }, + { 0x46, 0xef00, 0 }, + { 0x47, 0x013f, 0 }, + { 0x48, 0x0000, 0 }, + { 0x07, 0x0015, 30 }, + + { 0x07, 0x0017, 0 }, + + { 0x20, 0x0000, 0 }, + { 0x21, 0x0000, 0 }, + { 0x22, 0x0000, 0 } +}; + +static struct lms283gf05_seq disp_pdwnseq[] = { + { 0x07, 0x0016, 30 }, + + { 0x07, 0x0004, 0 }, + { 0x10, 0x0220, 20 }, + + { 0x13, 0x0060, 50 }, + + { 0x13, 0x0040, 50 }, + + { 0x13, 0x0000, 0 }, + { 0x10, 0x0000, 0 } +}; + + +static void lms283gf05_reset(unsigned long gpio, bool inverted) +{ + gpio_set_value(gpio, !inverted); + mdelay(100); + gpio_set_value(gpio, inverted); + mdelay(20); + gpio_set_value(gpio, !inverted); + mdelay(20); +} + +static void lms283gf05_toggle(struct spi_device *spi, + struct lms283gf05_seq *seq, int sz) +{ + char buf[3]; + int i; + + for (i = 0; i < sz; i++) { + buf[0] = 0x74; + buf[1] = 0x00; + buf[2] = seq[i].reg; + spi_write(spi, buf, 3); + + buf[0] = 0x76; + buf[1] = seq[i].value >> 8; + buf[2] = seq[i].value & 0xff; + spi_write(spi, buf, 3); + + mdelay(seq[i].delay); + } +} + +static int lms283gf05_power_set(struct lcd_device *ld, int power) +{ + struct lms283gf05_state *st = lcd_get_data(ld); + struct spi_device *spi = st->spi; + struct lms283gf05_pdata *pdata = spi->dev.platform_data; + + if (power) { + if (pdata) + lms283gf05_reset(pdata->reset_gpio, + pdata->reset_inverted); + lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq)); + } else { + lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq)); + if (pdata) + gpio_set_value(pdata->reset_gpio, + pdata->reset_inverted); + } + + return 0; +} + +static struct lcd_ops lms_ops = { + .set_power = lms283gf05_power_set, + .get_power = NULL, +}; + +static int __devinit lms283gf05_probe(struct spi_device *spi) +{ + struct lms283gf05_state *st; + struct lms283gf05_pdata *pdata = spi->dev.platform_data; + struct lcd_device *ld; + int ret = 0; + + if (pdata != NULL) { + ret = gpio_request(pdata->reset_gpio, "LMS285GF05 RESET"); + if (ret) + return ret; + + ret = gpio_direction_output(pdata->reset_gpio, + !pdata->reset_inverted); + if (ret) + goto err; + } + + st = kzalloc(sizeof(struct lms283gf05_state), GFP_KERNEL); + if (st == NULL) { + dev_err(&spi->dev, "No memory for device state\n"); + ret = -ENOMEM; + goto err; + } + + ld = lcd_device_register("lms283gf05", &spi->dev, st, &lms_ops); + if (IS_ERR(ld)) { + ret = PTR_ERR(ld); + goto err2; + } + + st->spi = spi; + st->ld = ld; + + dev_set_drvdata(&spi->dev, st); + + /* kick in the LCD */ + if (pdata) + lms283gf05_reset(pdata->reset_gpio, pdata->reset_inverted); + lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq)); + + return 0; + +err2: + kfree(st); +err: + if (pdata != NULL) + gpio_free(pdata->reset_gpio); + + return ret; +} + +static int __devexit lms283gf05_remove(struct spi_device *spi) +{ + struct lms283gf05_state *st = dev_get_drvdata(&spi->dev); + struct lms283gf05_pdata *pdata = st->spi->dev.platform_data; + + lcd_device_unregister(st->ld); + + if (pdata != NULL) + gpio_free(pdata->reset_gpio); + + kfree(st); + + return 0; +} + +static struct spi_driver lms283gf05_driver = { + .driver = { + .name = "lms283gf05", + .owner = THIS_MODULE, + }, + .probe = lms283gf05_probe, + .remove = __devexit_p(lms283gf05_remove), +}; + +static __init int lms283gf05_init(void) +{ + return spi_register_driver(&lms283gf05_driver); +} + +static __exit void lms283gf05_exit(void) +{ + spi_unregister_driver(&lms283gf05_driver); +} + +module_init(lms283gf05_init); +module_exit(lms283gf05_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("LCD283GF05 LCD"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c index 3bb4c0a50c6..9edb8d7c295 100644 --- a/drivers/video/backlight/mbp_nvidia_bl.c +++ b/drivers/video/backlight/mbp_nvidia_bl.c @@ -166,6 +166,15 @@ static const struct dmi_system_id __initdata mbp_device_table[] = { }, { .callback = mbp_dmi_match, + .ident = "MacBookAir 1,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir1,1"), + }, + .driver_data = (void *)&intel_chipset_data, + }, + { + .callback = mbp_dmi_match, .ident = "MacBook 5,1", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), @@ -175,6 +184,15 @@ static const struct dmi_system_id __initdata mbp_device_table[] = { }, { .callback = mbp_dmi_match, + .ident = "MacBook 5,2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5,2"), + }, + .driver_data = (void *)&nvidia_chipset_data, + }, + { + .callback = mbp_dmi_match, .ident = "MacBookAir 2,1", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), @@ -191,6 +209,24 @@ static const struct dmi_system_id __initdata mbp_device_table[] = { }, .driver_data = (void *)&nvidia_chipset_data, }, + { + .callback = mbp_dmi_match, + .ident = "MacBookPro 5,2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,2"), + }, + .driver_data = (void *)&nvidia_chipset_data, + }, + { + .callback = mbp_dmi_match, + .ident = "MacBookPro 5,5", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,5"), + }, + .driver_data = (void *)&nvidia_chipset_data, + }, { } }; diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c new file mode 100644 index 00000000000..467bdb7efb2 --- /dev/null +++ b/drivers/video/backlight/wm831x_bl.c @@ -0,0 +1,250 @@ +/* + * Backlight driver for Wolfson Microelectronics WM831x PMICs + * + * Copyright 2009 Wolfson Microelectonics plc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/backlight.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/regulator.h> + +struct wm831x_backlight_data { + struct wm831x *wm831x; + int isink_reg; + int current_brightness; +}; + +static int wm831x_backlight_set(struct backlight_device *bl, int brightness) +{ + struct wm831x_backlight_data *data = bl_get_data(bl); + struct wm831x *wm831x = data->wm831x; + int power_up = !data->current_brightness && brightness; + int power_down = data->current_brightness && !brightness; + int ret; + + if (power_up) { + /* Enable the ISINK */ + ret = wm831x_set_bits(wm831x, data->isink_reg, + WM831X_CS1_ENA, WM831X_CS1_ENA); + if (ret < 0) + goto err; + + /* Enable the DC-DC */ + ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, + WM831X_DC4_ENA, WM831X_DC4_ENA); + if (ret < 0) + goto err; + } + + if (power_down) { + /* DCDC first */ + ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, + WM831X_DC4_ENA, 0); + if (ret < 0) + goto err; + + /* ISINK */ + ret = wm831x_set_bits(wm831x, data->isink_reg, + WM831X_CS1_DRIVE | WM831X_CS1_ENA, 0); + if (ret < 0) + goto err; + } + + /* Set the new brightness */ + ret = wm831x_set_bits(wm831x, data->isink_reg, + WM831X_CS1_ISEL_MASK, brightness); + if (ret < 0) + goto err; + + if (power_up) { + /* Drive current through the ISINK */ + ret = wm831x_set_bits(wm831x, data->isink_reg, + WM831X_CS1_DRIVE, WM831X_CS1_DRIVE); + if (ret < 0) + return ret; + } + + data->current_brightness = brightness; + + return 0; + +err: + /* If we were in the middle of a power transition always shut down + * for safety. + */ + if (power_up || power_down) { + wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0); + wm831x_set_bits(wm831x, data->isink_reg, WM831X_CS1_ENA, 0); + } + + return ret; +} + +static int wm831x_backlight_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + + if (bl->props.power != FB_BLANK_UNBLANK) + brightness = 0; + + if (bl->props.fb_blank != FB_BLANK_UNBLANK) + brightness = 0; + + if (bl->props.state & BL_CORE_SUSPENDED) + brightness = 0; + + return wm831x_backlight_set(bl, brightness); +} + +static int wm831x_backlight_get_brightness(struct backlight_device *bl) +{ + struct wm831x_backlight_data *data = bl_get_data(bl); + return data->current_brightness; +} + +static struct backlight_ops wm831x_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = wm831x_backlight_update_status, + .get_brightness = wm831x_backlight_get_brightness, +}; + +static int wm831x_backlight_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *wm831x_pdata; + struct wm831x_backlight_pdata *pdata; + struct wm831x_backlight_data *data; + struct backlight_device *bl; + int ret, i, max_isel, isink_reg, dcdc_cfg; + + /* We need platform data */ + if (pdev->dev.parent->platform_data) { + wm831x_pdata = pdev->dev.parent->platform_data; + pdata = wm831x_pdata->backlight; + } else { + pdata = NULL; + } + + if (!pdata) { + dev_err(&pdev->dev, "No platform data supplied\n"); + return -EINVAL; + } + + /* Figure out the maximum current we can use */ + for (i = 0; i < WM831X_ISINK_MAX_ISEL; i++) { + if (wm831x_isinkv_values[i] > pdata->max_uA) + break; + } + + if (i == 0) { + dev_err(&pdev->dev, "Invalid max_uA: %duA\n", pdata->max_uA); + return -EINVAL; + } + max_isel = i - 1; + + if (pdata->max_uA != wm831x_isinkv_values[max_isel]) + dev_warn(&pdev->dev, + "Maximum current is %duA not %duA as requested\n", + wm831x_isinkv_values[max_isel], pdata->max_uA); + + switch (pdata->isink) { + case 1: + isink_reg = WM831X_CURRENT_SINK_1; + dcdc_cfg = 0; + break; + case 2: + isink_reg = WM831X_CURRENT_SINK_2; + dcdc_cfg = WM831X_DC4_FBSRC; + break; + default: + dev_err(&pdev->dev, "Invalid ISINK %d\n", pdata->isink); + return -EINVAL; + } + + /* Configure the ISINK to use for feedback */ + ret = wm831x_reg_unlock(wm831x); + if (ret < 0) + return ret; + + ret = wm831x_set_bits(wm831x, WM831X_DC4_CONTROL, WM831X_DC4_FBSRC, + dcdc_cfg); + + wm831x_reg_lock(wm831x); + if (ret < 0) + return ret; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + data->wm831x = wm831x; + data->current_brightness = 0; + data->isink_reg = isink_reg; + + bl = backlight_device_register("wm831x", &pdev->dev, + data, &wm831x_backlight_ops); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + kfree(data); + return PTR_ERR(bl); + } + + bl->props.max_brightness = max_isel; + bl->props.brightness = max_isel; + + platform_set_drvdata(pdev, bl); + + /* Disable the DCDC if it was started so we can bootstrap */ + wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0); + + + backlight_update_status(bl); + + return 0; +} + +static int wm831x_backlight_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct wm831x_backlight_data *data = bl_get_data(bl); + + backlight_device_unregister(bl); + kfree(data); + return 0; +} + +static struct platform_driver wm831x_backlight_driver = { + .driver = { + .name = "wm831x-backlight", + .owner = THIS_MODULE, + }, + .probe = wm831x_backlight_probe, + .remove = wm831x_backlight_remove, +}; + +static int __init wm831x_backlight_init(void) +{ + return platform_driver_register(&wm831x_backlight_driver); +} +module_init(wm831x_backlight_init); + +static void __exit wm831x_backlight_exit(void) +{ + platform_driver_unregister(&wm831x_backlight_driver); +} +module_exit(wm831x_backlight_exit); + +MODULE_DESCRIPTION("Backlight Driver for WM831x PMICs"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-backlight"); |