diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/ata/ahci.c | 26 | ||||
-rw-r--r-- | drivers/ata/ata_piix.c | 29 | ||||
-rw-r--r-- | drivers/ata/libata-acpi.c | 16 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 66 | ||||
-rw-r--r-- | drivers/ata/libata-eh.c | 14 | ||||
-rw-r--r-- | drivers/ata/libata-scsi.c | 240 | ||||
-rw-r--r-- | drivers/ata/libata-sff.c | 2 | ||||
-rw-r--r-- | drivers/ata/pata_ns87415.c | 10 | ||||
-rw-r--r-- | drivers/ata/sata_mv.c | 23 | ||||
-rw-r--r-- | drivers/ata/sata_nv.c | 68 | ||||
-rw-r--r-- | drivers/ata/sata_sx4.c | 4 |
11 files changed, 248 insertions, 250 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 47c80604052..95229e77bff 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -227,7 +227,7 @@ struct ahci_port_priv { static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val); static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val); -static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); static void ahci_irq_clear(struct ata_port *ap); static int ahci_port_start(struct ata_port *ap); @@ -729,7 +729,7 @@ static int ahci_stop_engine(struct ata_port *ap) /* wait for engine to stop. This could be as long as 500 msec */ tmp = ata_wait_register(port_mmio + PORT_CMD, - PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); + PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); if (tmp & PORT_CMD_LIST_ON) return -EIO; @@ -1564,9 +1564,9 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) if (!irq_stat) return IRQ_NONE; - spin_lock(&host->lock); + spin_lock(&host->lock); - for (i = 0; i < host->n_ports; i++) { + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; if (!(irq_stat & (1 << i))) @@ -1829,9 +1829,9 @@ static int ahci_port_start(struct ata_port *ap) pp->cmd_tbl_dma = mem_dma; /* - * Save off initial list of interrupts to be enabled. - * This could be changed later - */ + * Save off initial list of interrupts to be enabled. + * This could be changed later + */ pp->intr_mask = DEF_PORT_IRQ; ap->private_data = pp; @@ -1918,12 +1918,12 @@ static void ahci_print_info(struct ata_host *host) dev_printk(KERN_INFO, &pdev->dev, "AHCI %02x%02x.%02x%02x " "%u slots %u ports %s Gbps 0x%x impl %s mode\n" - , + , - (vers >> 24) & 0xff, - (vers >> 16) & 0xff, - (vers >> 8) & 0xff, - vers & 0xff, + (vers >> 24) & 0xff, + (vers >> 16) & 0xff, + (vers >> 8) & 0xff, + vers & 0xff, ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, @@ -1935,7 +1935,7 @@ static void ahci_print_info(struct ata_host *host) "flags: " "%s%s%s%s%s%s%s" "%s%s%s%s%s%s%s\n" - , + , cap & (1 << 31) ? "64bit " : "", cap & (1 << 30) ? "ncq " : "", diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3c6f43e381f..a4b2cb29f46 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -157,12 +157,12 @@ struct piix_host_priv { const int *map; }; -static int piix_init_one (struct pci_dev *pdev, - const struct pci_device_id *ent); +static int piix_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent); static void piix_pata_error_handler(struct ata_port *ap); -static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); -static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); -static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev); +static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev); +static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev); +static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev); static int ich_pata_cable_detect(struct ata_port *ap); #ifdef CONFIG_PM static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); @@ -650,9 +650,9 @@ static int ich_pata_cable_detect(struct ata_port *ap) while (lap->device) { if (lap->device == pdev->device && lap->subvendor == pdev->subsystem_vendor && - lap->subdevice == pdev->subsystem_device) { + lap->subdevice == pdev->subsystem_device) return ATA_CBL_PATA40_SHORT; - } + lap++; } @@ -699,7 +699,7 @@ static void piix_pata_error_handler(struct ata_port *ap) * None (inherited from caller). */ -static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) +static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) { unsigned int pio = adev->pio_mode - XFER_PIO_0; struct pci_dev *dev = to_pci_dev(ap->host->dev); @@ -786,7 +786,7 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) * None (inherited from caller). */ -static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, int isich) +static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, int isich) { struct pci_dev *dev = to_pci_dev(ap->host->dev); u8 master_port = ap->port_no ? 0x42 : 0x40; @@ -813,7 +813,7 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i int u_clock, u_speed; /* - * UDMA is handled by a combination of clock switching and + * UDMA is handled by a combination of clock switching and * selection of dividers * * Handy rule: Odd modes are UDMATIMx 01, even are 02 @@ -905,7 +905,7 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i * None (inherited from caller). */ -static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) +static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev) { do_pata_set_dmamode(ap, adev, 0); } @@ -921,7 +921,7 @@ static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) * None (inherited from caller). */ -static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev) +static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev) { do_pata_set_dmamode(ap, adev, 1); } @@ -1106,8 +1106,7 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) u16 cfg; int no_piix_dma = 0; - while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) - { + while ((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) { /* Look for 450NX PXB. Check for problem configurations A PCI quirk checks bit 6 already */ pci_read_config_word(pdev, 0x41, &cfg); @@ -1241,7 +1240,7 @@ static void piix_iocfg_bit18_quirk(struct pci_dev *pdev) * Zero on success, or -ERRNO value. */ -static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; struct device *dev = &pdev->dev; diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 3f753358904..08a52dd45fb 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -26,7 +26,7 @@ #include <acpi/actypes.h> #define NO_PORT_MULT 0xffff -#define SATA_ADR(root,pmp) (((root) << 16) | (pmp)) +#define SATA_ADR(root, pmp) (((root) << 16) | (pmp)) #define REGS_PER_GTF 7 struct ata_acpi_gtf { @@ -96,8 +96,8 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap) } } -static void ata_acpi_handle_hotplug (struct ata_port *ap, struct kobject *kobj, - u32 event) +static void ata_acpi_handle_hotplug(struct ata_port *ap, struct kobject *kobj, + u32 event) { char event_string[12]; char *envp[] = { event_string, NULL }; @@ -114,7 +114,7 @@ static void ata_acpi_handle_hotplug (struct ata_port *ap, struct kobject *kobj, } if (kobj) { - sprintf(event_string, "BAY_EVENT=%d", event); + sprintf(event_string, "BAY_EVENT=%d", event); kobject_uevent_env(kobj, KOBJ_CHANGE, envp); } } @@ -127,14 +127,14 @@ static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data) if (dev->sdev) kobj = &dev->sdev->sdev_gendev.kobj; - ata_acpi_handle_hotplug (dev->link->ap, kobj, event); + ata_acpi_handle_hotplug(dev->link->ap, kobj, event); } static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data) { struct ata_port *ap = data; - ata_acpi_handle_hotplug (ap, &ap->dev->kobj, event); + ata_acpi_handle_hotplug(ap, &ap->dev->kobj, event); } /** @@ -398,11 +398,11 @@ int ata_acpi_cbl_80wire(struct ata_port *ap) { struct ata_acpi_gtm gtm; int valid = 0; - + /* No _GTM data, no information */ if (ata_acpi_gtm(ap, >m) < 0) return 0; - + /* Split timing, DMA enabled */ if ((gtm.flags & 0x11) == 0x11 && gtm.drive[0].dma < 55) valid |= 1; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 69092bce1ad..b458639b473 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -49,11 +49,11 @@ #include <linux/workqueue.h> #include <linux/jiffies.h> #include <linux/scatterlist.h> +#include <linux/io.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_host.h> #include <linux/libata.h> -#include <asm/io.h> #include <asm/semaphore.h> #include <asm/byteorder.h> @@ -93,7 +93,7 @@ int libata_fua = 0; module_param_named(fua, libata_fua, int, 0444); MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); -static int ata_ignore_hpa = 0; +static int ata_ignore_hpa; module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644); MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)"); @@ -713,7 +713,7 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) } if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) { - printk("ata: SEMB device ignored\n"); + printk(KERN_INFO "ata: SEMB device ignored\n"); return ATA_DEV_SEMB_UNSUP; /* not yet */ } @@ -939,7 +939,7 @@ static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors) *max_sectors = ata_tf_to_lba48(&tf); else *max_sectors = ata_tf_to_lba(&tf); - if (dev->horkage & ATA_HORKAGE_HPA_SIZE) + if (dev->horkage & ATA_HORKAGE_HPA_SIZE) (*max_sectors)--; return 0; } @@ -1151,7 +1151,7 @@ void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown) * LOCKING: * caller. */ -void ata_noop_dev_select (struct ata_port *ap, unsigned int device) +void ata_noop_dev_select(struct ata_port *ap, unsigned int device) { } @@ -1171,7 +1171,7 @@ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) * caller. */ -void ata_std_dev_select (struct ata_port *ap, unsigned int device) +void ata_std_dev_select(struct ata_port *ap, unsigned int device) { u8 tmp; @@ -1292,7 +1292,7 @@ static unsigned int ata_id_xfermask(const u16 *id) */ u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF; if (mode < 5) /* Valid PIO range */ - pio_mask = (2 << mode) - 1; + pio_mask = (2 << mode) - 1; else pio_mask = 1; @@ -1693,7 +1693,7 @@ static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) * for pre-ATA4 drives. * * FIXME: ATA_CMD_ID_ATA is optional for early drives and right - * now we abort if we hit that case. + * now we abort if we hit that case. * * LOCKING: * Kernel thread context (may sleep) @@ -1979,9 +1979,8 @@ int ata_dev_configure(struct ata_device *dev) "supports DRM functions and may " "not be fully accessable.\n"); snprintf(revbuf, 7, "CFA"); - } - else - snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); + } else + snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); dev->n_sectors = ata_id_n_sectors(id); @@ -2110,7 +2109,7 @@ int ata_dev_configure(struct ata_device *dev) /* Let the user know. We don't want to disallow opens for rescue purposes, or in case the vendor is just a blithering idiot */ - if (print_info) { + if (print_info) { ata_dev_printk(dev, KERN_WARNING, "Drive reports diagnostics failure. This may indicate a drive\n"); ata_dev_printk(dev, KERN_WARNING, @@ -2667,8 +2666,8 @@ static const struct ata_timing ata_timing[] = { { 0xFF } }; -#define ENOUGH(v,unit) (((v)-1)/(unit)+1) -#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) +#define ENOUGH(v, unit) (((v)-1)/(unit)+1) +#define EZ(v, unit) ((v)?ENOUGH(v, unit):0) static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) { @@ -2695,7 +2694,7 @@ void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); } -static const struct ata_timing* ata_timing_find_mode(unsigned short speed) +static const struct ata_timing *ata_timing_find_mode(unsigned short speed) { const struct ata_timing *t; @@ -2727,10 +2726,10 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); - if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { + if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; - } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { + } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; } ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); @@ -2876,14 +2875,17 @@ static int ata_dev_set_mode(struct ata_device *dev) dev->flags |= ATA_DFLAG_PIO; err_mask = ata_dev_set_xfermode(dev); + /* Old CFA may refuse this command, which is just fine */ if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id)) - err_mask &= ~AC_ERR_DEV; + err_mask &= ~AC_ERR_DEV; + /* Some very old devices and some bad newer ones fail any kind of SET_XFERMODE request but support PIO0-2 timings and no IORDY */ if (dev->xfer_shift == ATA_SHIFT_PIO && !ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2) err_mask &= ~AC_ERR_DEV; + if (err_mask) { ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " "(err_mask=0x%x)\n", err_mask); @@ -3943,7 +3945,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA }, { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA }, { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, - { "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA }, + { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA }, { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, { "IOMEGA ZIP 250 ATAPI", NULL, ATA_HORKAGE_NODMA }, /* temporary fix */ { "IOMEGA ZIP 250 ATAPI Floppy", @@ -3959,7 +3961,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices where NCQ should be avoided */ /* NCQ is slow */ - { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ }, + { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ }, /* http://thread.gmane.org/gmane.linux.ide/14907 */ { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ }, /* NCQ is broken */ @@ -4106,7 +4108,7 @@ static void ata_dev_xfermask(struct ata_device *dev) } if ((host->flags & ATA_HOST_SIMPLEX) && - host->simplex_claimed && host->simplex_claimed != ap) { + host->simplex_claimed && host->simplex_claimed != ap) { xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by " "other device, disabling DMA\n"); @@ -4128,11 +4130,11 @@ static void ata_dev_xfermask(struct ata_device *dev) */ if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) /* UDMA/44 or higher would be available */ - if((ap->cbl == ATA_CBL_PATA40) || - (ata_drive_40wire(dev->id) && - (ap->cbl == ATA_CBL_PATA_UNK || - ap->cbl == ATA_CBL_PATA80))) { - ata_dev_printk(dev, KERN_WARNING, + if ((ap->cbl == ATA_CBL_PATA40) || + (ata_drive_40wire(dev->id) && + (ap->cbl == ATA_CBL_PATA_UNK || + ap->cbl == ATA_CBL_PATA80))) { + ata_dev_printk(dev, KERN_WARNING, "limited to UDMA/33 due to 40-wire cable\n"); xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); } @@ -4395,7 +4397,7 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) u32 addr, offset; u32 sg_len, len, blen; - /* determine if physical DMA addr spans 64K boundary. + /* determine if physical DMA addr spans 64K boundary. * Note h/w doesn't support 64-bit, so we unconditionally * truncate dma_addr_t to u32. */ @@ -4980,7 +4982,7 @@ next_sg: "%u bytes trailing data\n", bytes); for (i = 0; i < words; i++) - ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write); + ap->ops->data_xfer(qc->dev, (unsigned char *)pad_buf, 2, do_write); ap->hsm_task_state = HSM_ST_LAST; return; @@ -5908,8 +5910,8 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) * One if interrupt was handled, zero if not (shared irq). */ -inline unsigned int ata_host_intr (struct ata_port *ap, - struct ata_queued_cmd *qc) +inline unsigned int ata_host_intr(struct ata_port *ap, + struct ata_queued_cmd *qc) { struct ata_eh_info *ehi = &ap->link.eh_info; u8 status, host_stat = 0; @@ -6009,7 +6011,7 @@ idle_irq: * IRQ_NONE or IRQ_HANDLED. */ -irqreturn_t ata_interrupt (int irq, void *dev_instance) +irqreturn_t ata_interrupt(int irq, void *dev_instance) { struct ata_host *host = dev_instance; unsigned int i; @@ -6212,7 +6214,7 @@ int ata_flush_cache(struct ata_device *dev) /* This is wrong. On a failed flush we get back the LBA of the lost sector and we should (assuming it wasn't aborted as unknown) issue - a further flush command to continue the writeback until it + a further flush command to continue the writeback until it does not error */ err_mask = ata_do_simple_cmd(dev, cmd); if (err_mask) { diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 2eaa39fc65d..93e2b545b43 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1197,7 +1197,7 @@ void ata_eh_done(struct ata_link *link, struct ata_device *dev, * RETURNS: * Descriptive string for @err_mask */ -static const char * ata_err_string(unsigned int err_mask) +static const char *ata_err_string(unsigned int err_mask) { if (err_mask & AC_ERR_HOST_BUS) return "host bus error"; @@ -1934,7 +1934,7 @@ static void ata_eh_link_report(struct ata_link *link) ehc->i.serror & SERR_LINK_SEQ_ERR ? "LinkSeq " : "", ehc->i.serror & SERR_TRANS_ST_ERROR ? "TrStaTrns " : "", ehc->i.serror & SERR_UNRECOG_FIS ? "UnrecFIS " : "", - ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : "" ); + ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : ""); for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { static const char *dma_str[] = { @@ -1969,17 +1969,17 @@ static void ata_eh_link_report(struct ata_link *link) qc->err_mask & AC_ERR_NCQ ? " <F>" : ""); if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | - ATA_ERR) ) { + ATA_ERR)) { if (res->command & ATA_BUSY) ata_dev_printk(qc->dev, KERN_ERR, - "status: { Busy }\n" ); + "status: { Busy }\n"); else ata_dev_printk(qc->dev, KERN_ERR, "status: { %s%s%s%s}\n", res->command & ATA_DRDY ? "DRDY " : "", res->command & ATA_DF ? "DF " : "", res->command & ATA_DRQ ? "DRQ " : "", - res->command & ATA_ERR ? "ERR " : "" ); + res->command & ATA_ERR ? "ERR " : ""); } if (cmd->command != ATA_CMD_PACKET && @@ -1990,7 +1990,7 @@ static void ata_eh_link_report(struct ata_link *link) res->feature & ATA_ICRC ? "ICRC " : "", res->feature & ATA_UNC ? "UNC " : "", res->feature & ATA_IDNF ? "IDNF " : "", - res->feature & ATA_ABORTED ? "ABRT " : "" ); + res->feature & ATA_ABORTED ? "ABRT " : ""); } } @@ -2611,7 +2611,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, ehc->i.flags = 0; continue; - dev_fail: +dev_fail: nr_failed_devs++; if (ata_eh_handle_dev_fail(dev, rc)) nr_disabled_devs++; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 5b758b9ad0b..f5d5420a1ba 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -45,7 +45,7 @@ #include <scsi/scsi_transport.h> #include <linux/libata.h> #include <linux/hdreg.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include "libata.h" @@ -53,9 +53,9 @@ typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc); -static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, +static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); -static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, +static struct ata_device *ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, unsigned int id, unsigned int lun); @@ -228,7 +228,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) scsi_cmd[1] = (4 << 1); /* PIO Data-in */ scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, - block count in sector count field */ + block count in sector count field */ data_dir = DMA_FROM_DEVICE; } else { scsi_cmd[1] = (3 << 1); /* Non-data */ @@ -252,7 +252,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) /* Good values for timeout and retries? Values below from scsi_ioctl_send_command() for default case... */ cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize, - sensebuf, (10*HZ), 5, 0); + sensebuf, (10*HZ), 5, 0); if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */ u8 *desc = sensebuf + 8; @@ -263,18 +263,18 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) if (cmd_result & SAM_STAT_CHECK_CONDITION) { struct scsi_sense_hdr sshdr; scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, - &sshdr); - if (sshdr.sense_key==0 && - sshdr.asc==0 && sshdr.ascq==0) + &sshdr); + if (sshdr.sense_key == 0 && + sshdr.asc == 0 && sshdr.ascq == 0) cmd_result &= ~SAM_STAT_CHECK_CONDITION; } /* Send userspace a few ATA registers (same as drivers/ide) */ - if (sensebuf[0] == 0x72 && /* format is "descriptor" */ - desc[0] == 0x09 ) { /* code is "ATA Descriptor" */ - args[0] = desc[13]; /* status */ - args[1] = desc[3]; /* error */ - args[2] = desc[5]; /* sector count (0:7) */ + if (sensebuf[0] == 0x72 && /* format is "descriptor" */ + desc[0] == 0x09) { /* code is "ATA Descriptor" */ + args[0] = desc[13]; /* status */ + args[1] = desc[3]; /* error */ + args[2] = desc[5]; /* sector count (0:7) */ if (copy_to_user(arg, args, sizeof(args))) rc = -EFAULT; } @@ -350,8 +350,8 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) struct scsi_sense_hdr sshdr; scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sshdr); - if (sshdr.sense_key==0 && - sshdr.asc==0 && sshdr.ascq==0) + if (sshdr.sense_key == 0 && + sshdr.asc == 0 && sshdr.ascq == 0) cmd_result &= ~SAM_STAT_CHECK_CONDITION; } @@ -975,7 +975,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) if ((qc->dev->flags & ATA_DFLAG_SPUNDOWN) && (system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF)) { - static unsigned long warned = 0; + static unsigned long warned; if (!test_and_set_bit(0, &warned)) { ata_dev_printk(qc->dev, KERN_WARNING, @@ -1364,7 +1364,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) struct ata_eh_info *ehi = &qc->dev->link->eh_info; struct scsi_cmnd *cmd = qc->scsicmd; u8 *cdb = cmd->cmnd; - int need_sense = (qc->err_mask != 0); + int need_sense = (qc->err_mask != 0); /* We snoop the SET_FEATURES - Write Cache ON/OFF command, and * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE @@ -1396,7 +1396,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * was no error, SK, ASC and ASCQ will all be zero. */ if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && - ((cdb[2] & 0x20) || need_sense)) { + ((cdb[2] & 0x20) || need_sense)) { ata_gen_passthru_sense(qc); } else { if (!need_sense) { @@ -1500,7 +1500,7 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, return 0; early_finish: - ata_qc_free(qc); + ata_qc_free(qc); qc->scsidone(cmd); DPRINTK("EXIT - early finish (good or error)\n"); return 0; @@ -1590,8 +1590,8 @@ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) */ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, - unsigned int (*actor) (struct ata_scsi_args *args, - u8 *rbuf, unsigned int buflen)) + unsigned int (*actor) (struct ata_scsi_args *args, + u8 *rbuf, unsigned int buflen)) { u8 *rbuf; unsigned int buflen, rc; @@ -2140,7 +2140,7 @@ saving_not_supp: * None. */ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) + unsigned int buflen) { u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */ @@ -2464,7 +2464,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) return 0; } -static struct ata_device * ata_find_dev(struct ata_port *ap, int devno) +static struct ata_device *ata_find_dev(struct ata_port *ap, int devno) { if (ap->nr_pmp_links == 0) { if (likely(devno < ata_link_max_devices(&ap->link))) @@ -2477,8 +2477,8 @@ static struct ata_device * ata_find_dev(struct ata_port *ap, int devno) return NULL; } -static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, - const struct scsi_device *scsidev) +static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev) { int devno; @@ -2564,27 +2564,27 @@ static u8 ata_scsi_map_proto(u8 byte1) { switch((byte1 & 0x1e) >> 1) { - case 3: /* Non-data */ - return ATA_PROT_NODATA; - - case 6: /* DMA */ - case 10: /* UDMA Data-in */ - case 11: /* UDMA Data-Out */ - return ATA_PROT_DMA; - - case 4: /* PIO Data-in */ - case 5: /* PIO Data-out */ - return ATA_PROT_PIO; - - case 0: /* Hard Reset */ - case 1: /* SRST */ - case 8: /* Device Diagnostic */ - case 9: /* Device Reset */ - case 7: /* DMA Queued */ - case 12: /* FPDMA */ - case 15: /* Return Response Info */ - default: /* Reserved */ - break; + case 3: /* Non-data */ + return ATA_PROT_NODATA; + + case 6: /* DMA */ + case 10: /* UDMA Data-in */ + case 11: /* UDMA Data-Out */ + return ATA_PROT_DMA; + + case 4: /* PIO Data-in */ + case 5: /* PIO Data-out */ + return ATA_PROT_PIO; + + case 0: /* Hard Reset */ + case 1: /* SRST */ + case 8: /* Device Diagnostic */ + case 9: /* Device Reset */ + case 7: /* DMA Queued */ + case 12: /* FPDMA */ + case 15: /* Return Response Info */ + default: /* Reserved */ + break; } return ATA_PROT_UNKNOWN; @@ -2919,94 +2919,94 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, args.done = done; switch(scsicmd[0]) { - /* TODO: worth improving? */ - case FORMAT_UNIT: + /* TODO: worth improving? */ + case FORMAT_UNIT: + ata_scsi_invalid_field(cmd, done); + break; + + case INQUIRY: + if (scsicmd[1] & 2) /* is CmdDt set? */ ata_scsi_invalid_field(cmd, done); + else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); + else switch (scsicmd[2]) { + case 0x00: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00); break; - - case INQUIRY: - if (scsicmd[1] & 2) /* is CmdDt set? */ - ata_scsi_invalid_field(cmd, done); - else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); - else switch (scsicmd[2]) { - case 0x00: - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00); - break; - case 0x80: - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80); - break; - case 0x83: - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); - break; - case 0x89: - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89); - break; - default: - ata_scsi_invalid_field(cmd, done); - break; - } + case 0x80: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80); break; - - case MODE_SENSE: - case MODE_SENSE_10: - ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); + case 0x83: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); break; - - case MODE_SELECT: /* unconditionally return */ - case MODE_SELECT_10: /* bad-field-in-cdb */ + case 0x89: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89); + break; + default: ata_scsi_invalid_field(cmd, done); break; + } + break; + + case MODE_SENSE: + case MODE_SENSE_10: + ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); + break; - case READ_CAPACITY: + case MODE_SELECT: /* unconditionally return */ + case MODE_SELECT_10: /* bad-field-in-cdb */ + ata_scsi_invalid_field(cmd, done); + break; + + case READ_CAPACITY: + ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); + break; + + case SERVICE_ACTION_IN: + if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); - break; + else + ata_scsi_invalid_field(cmd, done); + break; - case SERVICE_ACTION_IN: - if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) - ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); - else - ata_scsi_invalid_field(cmd, done); - break; + case REPORT_LUNS: + ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); + break; - case REPORT_LUNS: - ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); - break; + case REQUEST_SENSE: + ata_scsi_set_sense(cmd, 0, 0, 0); + cmd->result = (DRIVER_SENSE << 24); + done(cmd); + break; - case REQUEST_SENSE: - ata_scsi_set_sense(cmd, 0, 0, 0); - cmd->result = (DRIVER_SENSE << 24); - done(cmd); - break; + /* if we reach this, then writeback caching is disabled, + * turning this into a no-op. + */ + case SYNCHRONIZE_CACHE: + /* fall through */ + + /* no-op's, complete with success */ + case REZERO_UNIT: + case SEEK_6: + case SEEK_10: + case TEST_UNIT_READY: + ata_scsi_rbuf_fill(&args, ata_scsiop_noop); + break; - /* if we reach this, then writeback caching is disabled, - * turning this into a no-op. - */ - case SYNCHRONIZE_CACHE: - /* fall through */ - - /* no-op's, complete with success */ - case REZERO_UNIT: - case SEEK_6: - case SEEK_10: - case TEST_UNIT_READY: + case SEND_DIAGNOSTIC: + tmp8 = scsicmd[1] & ~(1 << 3); + if ((tmp8 == 0x4) && (!scsicmd[3]) && (!scsicmd[4])) ata_scsi_rbuf_fill(&args, ata_scsiop_noop); - break; - - case SEND_DIAGNOSTIC: - tmp8 = scsicmd[1] & ~(1 << 3); - if ((tmp8 == 0x4) && (!scsicmd[3]) && (!scsicmd[4])) - ata_scsi_rbuf_fill(&args, ata_scsiop_noop); - else - ata_scsi_invalid_field(cmd, done); - break; + else + ata_scsi_invalid_field(cmd, done); + break; - /* all other commands */ - default: - ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); - /* "Invalid command operation code" */ - done(cmd); - break; + /* all other commands */ + default: + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); + /* "Invalid command operation code" */ + done(cmd); + break; } } diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 8227c45109e..48acc09dab9 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -248,7 +248,7 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc) * LOCKING: * spin_lock_irqsave(host lock) */ -void ata_bmdma_start (struct ata_queued_cmd *qc) +void ata_bmdma_start(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; u8 dmactl; diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index bb97ef583f9..b9a17eb100d 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c @@ -17,7 +17,7 @@ * TODO: * Test PARISC SuperIO * Get someone to test on SPARC - * Implement lazy pio/dma switching for better performance + * Implement lazy pio/dma switching for better performance * 8bit shared timing. * See if we need to kill the FIFO for ATAPI */ @@ -60,10 +60,10 @@ static void ns87415_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo u16 clocking; u8 iordy; u8 status; - + /* Timing register format is 17 - low nybble read timing with the high nybble being 16 - x for recovery time in PCI clocks */ - + ata_timing_compute(adev, adev->pio_mode, &t, T, 0); clocking = 17 - FIT(t.active, 2, 17); @@ -71,7 +71,7 @@ static void ns87415_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo /* Use the same timing for read and write bytes */ clocking |= (clocking << 8); pci_write_config_word(dev, timing, clocking); - + /* Set the IORDY enable versus DMA enable on or off properly */ pci_read_config_byte(dev, 0x42, &iordy); iordy &= ~(1 << (4 + unit)); @@ -185,7 +185,7 @@ static void ns87415_bmdma_irq_clear(struct ata_port *ap) if (!mmio) return; - iowrite8((ioread8(mmio + ATA_DMA_CMD) | ATA_DMA_INTR | ATA_DMA_ERR), + iowrite8((ioread8(mmio + ATA_DMA_CMD) | ATA_DMA_INTR | ATA_DMA_ERR), mmio + ATA_DMA_CMD); } diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 7f1b13e89cf..b39648f0914 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -845,7 +845,7 @@ static int __mv_stop_dma(struct ata_port *ap) pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; } else { WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); - } + } /* now properly wait for the eDMA to stop */ for (i = 1000; i > 0; i--) { @@ -883,7 +883,7 @@ static void mv_dump_mem(void __iomem *start, unsigned bytes) for (b = 0; b < bytes; ) { DPRINTK("%p: ", start + b); for (w = 0; b < bytes && w < 4; w++) { - printk("%08x ",readl(start + b)); + printk("%08x ", readl(start + b)); b += sizeof(u32); } printk("\n"); @@ -899,8 +899,8 @@ static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) for (b = 0; b < bytes; ) { DPRINTK("%02x: ", b); for (w = 0; b < bytes && w < 4; w++) { - (void) pci_read_config_dword(pdev,b,&dw); - printk("%08x ",dw); + (void) pci_read_config_dword(pdev, b, &dw); + printk("%08x ", dw); b += sizeof(u32); } printk("\n"); @@ -944,9 +944,9 @@ static void mv_dump_all_regs(void __iomem *mmio_base, int port, } for (p = start_port; p < start_port + num_ports; p++) { port_base = mv_port_base(mmio_base, p); - DPRINTK("EDMA regs (port %i):\n",p); + DPRINTK("EDMA regs (port %i):\n", p); mv_dump_mem(port_base, 0x54); - DPRINTK("SATA regs (port %i):\n",p); + DPRINTK("SATA regs (port %i):\n", p); mv_dump_mem(port_base+0x300, 0x60); } #endif @@ -1184,7 +1184,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) u16 flags = 0; unsigned in_index; - if (qc->tf.protocol != ATA_PROT_DMA) + if (qc->tf.protocol != ATA_PROT_DMA) return; /* Fill in command request block @@ -1276,7 +1276,7 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) unsigned in_index; u32 flags = 0; - if (qc->tf.protocol != ATA_PROT_DMA) + if (qc->tf.protocol != ATA_PROT_DMA) return; /* Fill in Gen IIE command request block @@ -1606,7 +1606,7 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", - hc,relevant,hc_irq_cause); + hc, relevant, hc_irq_cause); for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { struct ata_port *ap = host->ports[port]; @@ -1983,9 +1983,8 @@ static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, for (i = 0; i < 1000; i++) { udelay(1); t = readl(reg); - if (PCI_MASTER_EMPTY & t) { + if (PCI_MASTER_EMPTY & t) break; - } } if (!(PCI_MASTER_EMPTY & t)) { printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); @@ -2668,7 +2667,7 @@ static void mv_print_info(struct ata_host *host) */ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - static int printed_version = 0; + static int printed_version; unsigned int board_idx = (unsigned int)ent->driver_data; const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL }; struct ata_host *host; diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 240a8920d0b..2e0279fdd7a 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -163,7 +163,7 @@ enum { NV_ADMA_STAT_STOPPED = (1 << 10), NV_ADMA_STAT_DONE = (1 << 12), NV_ADMA_STAT_ERR = NV_ADMA_STAT_CPBERR | - NV_ADMA_STAT_TIMEOUT, + NV_ADMA_STAT_TIMEOUT, /* port flags */ NV_ADMA_PORT_REGISTER_MODE = (1 << 0), @@ -228,7 +228,7 @@ struct nv_adma_cpb { u8 reserved1; /* 1 */ u8 ctl_flags; /* 2 */ /* len is length of taskfile in 64 bit words */ - u8 len; /* 3 */ + u8 len; /* 3 */ u8 tag; /* 4 */ u8 next_cpb_idx; /* 5 */ __le16 reserved2; /* 6-7 */ @@ -244,9 +244,9 @@ struct nv_adma_port_priv { dma_addr_t cpb_dma; struct nv_adma_prd *aprd; dma_addr_t aprd_dma; - void __iomem * ctl_block; - void __iomem * gen_block; - void __iomem * notifier_clear_block; + void __iomem *ctl_block; + void __iomem *gen_block; + void __iomem *notifier_clear_block; u8 flags; int last_issue_ncq; }; @@ -293,7 +293,7 @@ struct nv_swncq_port_priv { #define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT))))) -static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); #ifdef CONFIG_PM static int nv_pci_device_resume(struct pci_dev *pdev); #endif @@ -301,8 +301,8 @@ static void nv_ck804_host_stop(struct ata_host *host); static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance); static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance); static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance); -static int nv_scr_read (struct ata_port *ap, unsigned int sc_reg, u32 *val); -static int nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); +static int nv_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val); +static int nv_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val); static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); @@ -653,12 +653,12 @@ static void nv_adma_register_mode(struct ata_port *ap) return; status = readw(mmio + NV_ADMA_STAT); - while(!(status & NV_ADMA_STAT_IDLE) && count < 20) { + while (!(status & NV_ADMA_STAT_IDLE) && count < 20) { ndelay(50); status = readw(mmio + NV_ADMA_STAT); count++; } - if(count == 20) + if (count == 20) ata_port_printk(ap, KERN_WARNING, "timeout waiting for ADMA IDLE, stat=0x%hx\n", status); @@ -668,12 +668,12 @@ static void nv_adma_register_mode(struct ata_port *ap) count = 0; status = readw(mmio + NV_ADMA_STAT); - while(!(status & NV_ADMA_STAT_LEGACY) && count < 20) { + while (!(status & NV_ADMA_STAT_LEGACY) && count < 20) { ndelay(50); status = readw(mmio + NV_ADMA_STAT); count++; } - if(count == 20) + if (count == 20) ata_port_printk(ap, KERN_WARNING, "timeout waiting for ADMA LEGACY, stat=0x%hx\n", status); @@ -697,13 +697,13 @@ static void nv_adma_mode(struct ata_port *ap) writew(tmp | NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL); status = readw(mmio + NV_ADMA_STAT); - while(((status & NV_ADMA_STAT_LEGACY) || + while (((status & NV_ADMA_STAT_LEGACY) || !(status & NV_ADMA_STAT_IDLE)) && count < 20) { ndelay(50); status = readw(mmio + NV_ADMA_STAT); count++; } - if(count == 20) + if (count == 20) ata_port_printk(ap, KERN_WARNING, "timeout waiting for ADMA LEGACY clear and IDLE, stat=0x%hx\n", status); @@ -747,8 +747,7 @@ static int nv_adma_slave_config(struct scsi_device *sdev) on the port. */ adma_enable = 0; nv_adma_register_mode(ap); - } - else { + } else { bounce_limit = *ap->dev->dma_mask; segment_boundary = NV_ADMA_DMA_BOUNDARY; sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN; @@ -757,23 +756,22 @@ static int nv_adma_slave_config(struct scsi_device *sdev) pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, ¤t_reg); - if(ap->port_no == 1) + if (ap->port_no == 1) config_mask = NV_MCP_SATA_CFG_20_PORT1_EN | NV_MCP_SATA_CFG_20_PORT1_PWB_EN; else config_mask = NV_MCP_SATA_CFG_20_PORT0_EN | NV_MCP_SATA_CFG_20_PORT0_PWB_EN; - if(adma_enable) { + if (adma_enable) { new_reg = current_reg | config_mask; pp->flags &= ~NV_ADMA_ATAPI_SETUP_COMPLETE; - } - else { + } else { new_reg = current_reg & ~config_mask; pp->flags |= NV_ADMA_ATAPI_SETUP_COMPLETE; } - if(current_reg != new_reg) + if (current_reg != new_reg) pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, new_reg); blk_queue_bounce_limit(sdev->request_queue, bounce_limit); @@ -807,7 +805,7 @@ static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb) { unsigned int idx = 0; - if(tf->flags & ATA_TFLAG_ISADDR) { + if (tf->flags & ATA_TFLAG_ISADDR) { if (tf->flags & ATA_TFLAG_LBA48) { cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature | WNB); cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect); @@ -824,12 +822,12 @@ static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb) cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah); } - if(tf->flags & ATA_TFLAG_DEVICE) + if (tf->flags & ATA_TFLAG_DEVICE) cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device); cpb[idx++] = cpu_to_le16((ATA_REG_CMD << 8) | tf->command | CMDEND); - while(idx < 12) + while (idx < 12) cpb[idx++] = cpu_to_le16(IGN); return idx; @@ -850,7 +848,7 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err) int freeze = 0; ata_ehi_clear_desc(ehi); - __ata_ehi_push_desc(ehi, "CPB resp_flags 0x%x: ", flags ); + __ata_ehi_push_desc(ehi, "CPB resp_flags 0x%x: ", flags); if (flags & NV_CPB_RESP_ATA_ERR) { ata_ehi_push_desc(ehi, "ATA error"); ehi->err_mask |= AC_ERR_DEV; @@ -879,7 +877,7 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err) struct ata_queued_cmd *qc = ata_qc_from_tag(ap, cpb_num); VPRINTK("CPB flags done, flags=0x%x\n", flags); if (likely(qc)) { - DPRINTK("Completing qc from tag %d\n",cpb_num); + DPRINTK("Completing qc from tag %d\n", cpb_num); ata_qc_complete(qc); } else { struct ata_eh_info *ehi = &ap->link.eh_info; @@ -952,7 +950,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) { u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804) >> (NV_INT_PORT_SHIFT * i); - if(ata_tag_valid(ap->link.active_tag)) + if (ata_tag_valid(ap->link.active_tag)) /** NV_INT_DEV indication seems unreliable at times at least in ADMA mode. Force it on always when a command is active, to prevent losing interrupts. */ @@ -966,7 +964,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL); - if( !NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier && + if (!NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier && !notifier_error) /* Nothing to do */ continue; @@ -990,7 +988,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) struct ata_eh_info *ehi = &ap->link.eh_info; ata_ehi_clear_desc(ehi); - __ata_ehi_push_desc(ehi, "ADMA status 0x%08x: ", status ); + __ata_ehi_push_desc(ehi, "ADMA status 0x%08x: ", status); if (status & NV_ADMA_STAT_TIMEOUT) { ehi->err_mask |= AC_ERR_SYSTEM; ata_ehi_push_desc(ehi, "timeout"); @@ -1056,14 +1054,14 @@ static void nv_adma_freeze(struct ata_port *ap) return; /* clear any outstanding CK804 notifications */ - writeb( NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT), + writeb(NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT), ap->host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804); /* Disable interrupt */ tmp = readw(mmio + NV_ADMA_CTL); - writew( tmp & ~(NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN), + writew(tmp & ~(NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN), mmio + NV_ADMA_CTL); - readw( mmio + NV_ADMA_CTL ); /* flush posted write */ + readw(mmio + NV_ADMA_CTL ); /* flush posted write */ } static void nv_adma_thaw(struct ata_port *ap) @@ -1079,9 +1077,9 @@ static void nv_adma_thaw(struct ata_port *ap) /* Enable interrupt */ tmp = readw(mmio + NV_ADMA_CTL); - writew( tmp | (NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN), + writew(tmp | (NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN), mmio + NV_ADMA_CTL); - readw( mmio + NV_ADMA_CTL ); /* flush posted write */ + readw(mmio + NV_ADMA_CTL ); /* flush posted write */ } static void nv_adma_irq_clear(struct ata_port *ap) @@ -1096,7 +1094,7 @@ static void nv_adma_irq_clear(struct ata_port *ap) } /* clear any outstanding CK804 notifications */ - writeb( NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT), + writeb(NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT), ap->host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804); /* clear ADMA status */ diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 9f9f7b30654..b6026bceccd 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -62,13 +62,13 @@ submit ATA packet to hardware hardware executes ATA WRITE command, w/ data in DIMM hardware raises interrupt - + and each READ looks like this: submit ATA packet to hardware hardware executes ATA READ command, w/ data in DIMM hardware raises interrupt - + submit HDMA packet to hardware hardware copies data from DIMM to system memory hardware raises interrupt |