diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 420 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 44 | ||||
| -rw-r--r-- | drivers/i2c/chips/Kconfig | 402 | ||||
| -rw-r--r-- | drivers/i2c/chips/Makefile | 38 |
6 files changed, 470 insertions, 437 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index aed4a9b97c1..cf087de3b3a 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -44,6 +44,8 @@ source "drivers/i2c/Kconfig" source "drivers/w1/Kconfig" +source "drivers/hwmon/Kconfig" + source "drivers/misc/Kconfig" source "drivers/media/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 3167be54fed..126a851d565 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_INPUT) += input/ obj-$(CONFIG_I2O) += message/ obj-$(CONFIG_I2C) += i2c/ obj-$(CONFIG_W1) += w1/ +obj-$(CONFIG_HWMON) += hwmon/ obj-$(CONFIG_PHONE) += telephony/ obj-$(CONFIG_MD) += md/ obj-$(CONFIG_BT) += bluetooth/ diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig new file mode 100644 index 00000000000..140d5f851a5 --- /dev/null +++ b/drivers/hwmon/Kconfig @@ -0,0 +1,420 @@ +# +# I2C Sensor chip drivers configuration +# + +menu "Hardware Monitoring support" + +config HWMON + tristate "Hardware Monitoring support" + default y + help + Hardware monitoring devices let you monitor the hardware health + of a system. Most modern motherboards include such a device. It + can include temperature sensors, voltage sensors, fan speed + sensors and various additional features such as the ability to + control the speed of the fans. + +config SENSORS_ADM1021 + tristate "Analog Devices ADM1021 and compatibles" + depends on HWMON && I2C + select I2C_SENSOR + help + If you say yes here you get support for Analog Devices ADM1021 + and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, + Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, + and the XEON processor built-in sensor. + + This driver can also be built as a module. If so, the module + will be called adm1021. + +config SENSORS_ADM1025 + tristate "Analog Devices ADM1025 and compatibles" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Analog Devices ADM1025 + and Philips NE1619 sensor chips. + + This driver can also be built as a module. If so, the module + will be called adm1025. + +config SENSORS_ADM1026 + tristate "Analog Devices ADM1026 and compatibles" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Analog Devices ADM1026 + sensor chip. + + This driver can also be built as a module. If so, the module + will be called adm1026. + +config SENSORS_ADM1031 + tristate "Analog Devices ADM1031 and compatibles" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Analog Devices ADM1031 + and ADM1030 sensor chips. + + This driver can also be built as a module. If so, the module + will be called adm1031. + +config SENSORS_ADM9240 + tristate "Analog Devices ADM9240 and compatibles" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Analog Devices ADM9240, + Dallas DS1780, National Semiconductor LM81 sensor chips. + + This driver can also be built as a module. If so, the module + will be called adm9240. + +config SENSORS_ASB100 + tristate "Asus ASB100 Bach" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for the ASB100 Bach sensor + chip found on some Asus mainboards. + + This driver can also be built as a module. If so, the module + will be called asb100. + +config SENSORS_ATXP1 + tristate "Attansic ATXP1 VID controller" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for the Attansic ATXP1 VID + controller. + + If your board have such a chip, you are able to control your CPU + core and other voltages. + + This driver can also be built as a module. If so, the module + will be called atxp1. + +config SENSORS_DS1621 + tristate "Dallas Semiconductor DS1621 and DS1625" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Dallas Semiconductor + DS1621 and DS1625 sensor chips. + + This driver can also be built as a module. If so, the module + will be called ds1621. + +config SENSORS_FSCHER + tristate "FSC Hermes" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Fujitsu Siemens + Computers Hermes sensor chips. + + This driver can also be built as a module. If so, the module + will be called fscher. + +config SENSORS_FSCPOS + tristate "FSC Poseidon" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Fujitsu Siemens + Computers Poseidon sensor chips. + + This driver can also be built as a module. If so, the module + will be called fscpos. + +config SENSORS_GL518SM + tristate "Genesys Logic GL518SM" + depends on HWMON && I2C + select I2C_SENSOR + help + If you say yes here you get support for Genesys Logic GL518SM + sensor chips. + + This driver can also be built as a module. If so, the module + will be called gl518sm. + +config SENSORS_GL520SM + tristate "Genesys Logic GL520SM" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Genesys Logic GL520SM + sensor chips. + + This driver can also be built as a module. If so, the module + will be called gl520sm. + +config SENSORS_IT87 + tristate "ITE IT87xx and compatibles" + depends on HWMON && I2C + select I2C_SENSOR + help + If you say yes here you get support for ITE IT87xx sensor chips + and clones: SiS960. + + This driver can also be built as a module. If so, the module + will be called it87. + +config SENSORS_LM63 + tristate "National Semiconductor LM63" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for the National Semiconductor + LM63 remote diode digital temperature sensor with integrated fan + control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro) + motherboard, among others. + + This driver can also be built as a module. If so, the module + will be called lm63. + +config SENSORS_LM75 + tristate "National Semiconductor LM75 and compatibles" + depends on HWMON && I2C + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM75 + sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in + 9-bit precision mode), and TelCom (now Microchip) TCN75. + + The DS75 and DS1775 in 10- to 12-bit precision modes will require + a force module parameter. The driver will not handle the extra + precision anyhow. + + This driver can also be built as a module. If so, the module + will be called lm75. + +config SENSORS_LM77 + tristate "National Semiconductor LM77" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM77 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm77. + +config SENSORS_LM78 + tristate "National Semiconductor LM78 and compatibles" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM78, + LM78-J and LM79. + + This driver can also be built as a module. If so, the module + will be called lm78. + +config SENSORS_LM80 + tristate "National Semiconductor LM80" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor + LM80 sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm80. + +config SENSORS_LM83 + tristate "National Semiconductor LM83" + depends on HWMON && I2C + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor + LM83 sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm83. + +config SENSORS_LM85 + tristate "National Semiconductor LM85 and compatibles" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM85 + sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. + + This driver can also be built as a module. If so, the module + will be called lm85. + +config SENSORS_LM87 + tristate "National Semiconductor LM87" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM87 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm87. + +config SENSORS_LM90 + tristate "National Semiconductor LM90 and compatibles" + depends on HWMON && I2C + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM90, + LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and + MAX6658 sensor chips. + + The Analog Devices ADT7461 sensor chip is also supported, but only + if found in ADM1032 compatibility mode. + + This driver can also be built as a module. If so, the module + will be called lm90. + +config SENSORS_LM92 + tristate "National Semiconductor LM92 and compatibles" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM92 + and Maxim MAX6635 sensor chips. + + This driver can also be built as a module. If so, the module + will be called lm92. + +config SENSORS_MAX1619 + tristate "Maxim MAX1619 sensor chip" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for MAX1619 sensor chip. + + This driver can also be built as a module. If so, the module + will be called max1619. + +config SENSORS_PC87360 + tristate "National Semiconductor PC87360 family" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get access to the hardware monitoring + functions of the National Semiconductor PC8736x Super-I/O chips. + The PC87360, PC87363 and PC87364 only have fan monitoring and + control. The PC87365 and PC87366 additionally have voltage and + temperature monitoring. + + This driver can also be built as a module. If so, the module + will be called pc87360. + +config SENSORS_SIS5595 + tristate "Silicon Integrated Systems Corp. SiS5595" + depends on HWMON && I2C && PCI && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get support for the integrated sensors in + SiS5595 South Bridges. + + This driver can also be built as a module. If so, the module + will be called sis5595. + +config SENSORS_SMSC47M1 + tristate "SMSC LPC47M10x and compatibles" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get support for the integrated fan + monitoring and control capabilities of the SMSC LPC47B27x, + LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips. + + This driver can also be built as a module. If so, the module + will be called smsc47m1. + +config SENSORS_SMSC47B397 + tristate "SMSC LPC47B397-NC" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get support for the SMSC LPC47B397-NC + sensor chip. + + This driver can also be built as a module. If so, the module + will be called smsc47b397. + +config SENSORS_VIA686A + tristate "VIA686A" + depends on HWMON && I2C && PCI + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get support for the integrated sensors in + Via 686A/B South Bridges. + + This driver can also be built as a module. If so, the module + will be called via686a. + +config SENSORS_W83781D + tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" + depends on HWMON && I2C + select I2C_SENSOR + help + If you say yes here you get support for the Winbond W8378x series + of sensor chips: the W83781D, W83782D, W83783S and W83627HF, + and the similar Asus AS99127F. + + This driver can also be built as a module. If so, the module + will be called w83781d. + +config SENSORS_W83L785TS + tristate "Winbond W83L785TS-S" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for the Winbond W83L785TS-S + sensor chip, which is used on the Asus A7N8X, among other + motherboards. + + This driver can also be built as a module. If so, the module + will be called w83l785ts. + +config SENSORS_W83627HF + tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get support for the Winbond W836X7 series + of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF + + This driver can also be built as a module. If so, the module + will be called w83627hf. + +config SENSORS_W83627EHF + tristate "Winbond W83627EHF" + depends on HWMON && I2C && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get preliminary support for the hardware + monitoring functionality of the Winbond W83627EHF Super-I/O chip. + Only fan and temperature inputs are supported at the moment, while + the chip does much more than that. + + This driver can also be built as a module. If so, the module + will be called w83627ehf. + +config HWMON_DEBUG_CHIP + bool "Hardware Monitoring Chip debugging messages" + depends on HWMON + default n + help + Say Y here if you want the I2C chip drivers to produce a bunch of + debug messages to the system log. Select this if you are having + a problem with I2C support and want to see more of what is going + on. + +endmenu diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile new file mode 100644 index 00000000000..2781403a023 --- /dev/null +++ b/drivers/hwmon/Makefile @@ -0,0 +1,44 @@ +# +# Makefile for sensor chip drivers. +# + +# asb100, then w83781d go first, as they can override other drivers' addresses. +obj-$(CONFIG_SENSORS_ASB100) += asb100.o +obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o +obj-$(CONFIG_SENSORS_W83781D) += w83781d.o + +obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o +obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o +obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o +obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o +obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o +obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o +obj-$(CONFIG_SENSORS_DS1621) += ds1621.o +obj-$(CONFIG_SENSORS_FSCHER) += fscher.o +obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o +obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o +obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o +obj-$(CONFIG_SENSORS_IT87) += it87.o +obj-$(CONFIG_SENSORS_LM63) += lm63.o +obj-$(CONFIG_SENSORS_LM75) += lm75.o +obj-$(CONFIG_SENSORS_LM77) += lm77.o +obj-$(CONFIG_SENSORS_LM78) += lm78.o +obj-$(CONFIG_SENSORS_LM80) += lm80.o +obj-$(CONFIG_SENSORS_LM83) += lm83.o +obj-$(CONFIG_SENSORS_LM85) += lm85.o +obj-$(CONFIG_SENSORS_LM87) += lm87.o +obj-$(CONFIG_SENSORS_LM90) += lm90.o +obj-$(CONFIG_SENSORS_LM92) += lm92.o +obj-$(CONFIG_SENSORS_MAX1619) += max1619.o +obj-$(CONFIG_SENSORS_PC87360) += pc87360.o +obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o +obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o +obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o +obj-$(CONFIG_SENSORS_VIA686A) += via686a.o +obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o +obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o + +ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y) +EXTRA_CFLAGS += -DDEBUG +endif + diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index fddfc11b297..43f70dbfc03 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -1,410 +1,12 @@ # -# I2C Sensor and "other" chip configuration +# Miscellaneous I2C chip drivers configuration # -menu "Hardware Sensors Chip support" - depends on I2C - config I2C_SENSOR tristate default n -config SENSORS_ADM1021 - tristate "Analog Devices ADM1021 and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1021 - and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, - Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, - and the XEON processor built-in sensor. - - This driver can also be built as a module. If so, the module - will be called adm1021. - -config SENSORS_ADM1025 - tristate "Analog Devices ADM1025 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1025 - and Philips NE1619 sensor chips. - - This driver can also be built as a module. If so, the module - will be called adm1025. - -config SENSORS_ADM1026 - tristate "Analog Devices ADM1026 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1026 - sensor chip. - - This driver can also be built as a module. If so, the module - will be called adm1026. - -config SENSORS_ADM1031 - tristate "Analog Devices ADM1031 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1031 - and ADM1030 sensor chips. - - This driver can also be built as a module. If so, the module - will be called adm1031. - -config SENSORS_ADM9240 - tristate "Analog Devices ADM9240 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM9240, - Dallas DS1780, National Semiconductor LM81 sensor chips. - - This driver can also be built as a module. If so, the module - will be called adm9240. - -config SENSORS_ASB100 - tristate "Asus ASB100 Bach" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for the ASB100 Bach sensor - chip found on some Asus mainboards. - - This driver can also be built as a module. If so, the module - will be called asb100. - -config SENSORS_ATXP1 - tristate "Attansic ATXP1 VID controller" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for the Attansic ATXP1 VID - controller. - - If your board have such a chip, you are able to control your CPU - core and other voltages. - - This driver can also be built as a module. If so, the module - will be called atxp1. - -config SENSORS_DS1621 - tristate "Dallas Semiconductor DS1621 and DS1625" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Dallas Semiconductor - DS1621 and DS1625 sensor chips. - - This driver can also be built as a module. If so, the module - will be called ds1621. - -config SENSORS_FSCHER - tristate "FSC Hermes" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Fujitsu Siemens - Computers Hermes sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscher. - -config SENSORS_FSCPOS - tristate "FSC Poseidon" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Fujitsu Siemens - Computers Poseidon sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscpos. - -config SENSORS_GL518SM - tristate "Genesys Logic GL518SM" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for Genesys Logic GL518SM - sensor chips. - - This driver can also be built as a module. If so, the module - will be called gl518sm. - -config SENSORS_GL520SM - tristate "Genesys Logic GL520SM" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Genesys Logic GL520SM - sensor chips. - - This driver can also be built as a module. If so, the module - will be called gl520sm. - -config SENSORS_IT87 - tristate "ITE IT87xx and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for ITE IT87xx sensor chips - and clones: SiS960. - - This driver can also be built as a module. If so, the module - will be called it87. - -config SENSORS_LM63 - tristate "National Semiconductor LM63" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for the National Semiconductor - LM63 remote diode digital temperature sensor with integrated fan - control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro) - motherboard, among others. - - This driver can also be built as a module. If so, the module - will be called lm63. - -config SENSORS_LM75 - tristate "National Semiconductor LM75 and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM75 - sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in - 9-bit precision mode), and TelCom (now Microchip) TCN75. - - The DS75 and DS1775 in 10- to 12-bit precision modes will require - a force module parameter. The driver will not handle the extra - precision anyhow. - - This driver can also be built as a module. If so, the module - will be called lm75. - -config SENSORS_LM77 - tristate "National Semiconductor LM77" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM77 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm77. - -config SENSORS_LM78 - tristate "National Semiconductor LM78 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM78, - LM78-J and LM79. - - This driver can also be built as a module. If so, the module - will be called lm78. - -config SENSORS_LM80 - tristate "National Semiconductor LM80" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor - LM80 sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm80. - -config SENSORS_LM83 - tristate "National Semiconductor LM83" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor - LM83 sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm83. - -config SENSORS_LM85 - tristate "National Semiconductor LM85 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM85 - sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. - - This driver can also be built as a module. If so, the module - will be called lm85. - -config SENSORS_LM87 - tristate "National Semiconductor LM87" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM87 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm87. - -config SENSORS_LM90 - tristate "National Semiconductor LM90 and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and - MAX6658 sensor chips. - - The Analog Devices ADT7461 sensor chip is also supported, but only - if found in ADM1032 compatibility mode. - - This driver can also be built as a module. If so, the module - will be called lm90. - -config SENSORS_LM92 - tristate "National Semiconductor LM92 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM92 - and Maxim MAX6635 sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm92. - -config SENSORS_MAX1619 - tristate "Maxim MAX1619 sensor chip" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for MAX1619 sensor chip. - - This driver can also be built as a module. If so, the module - will be called max1619. - -config SENSORS_PC87360 - tristate "National Semiconductor PC87360 family" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get access to the hardware monitoring - functions of the National Semiconductor PC8736x Super-I/O chips. - The PC87360, PC87363 and PC87364 only have fan monitoring and - control. The PC87365 and PC87366 additionally have voltage and - temperature monitoring. - - This driver can also be built as a module. If so, the module - will be called pc87360. - -config SENSORS_SMSC47B397 - tristate "SMSC LPC47B397-NC" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the SMSC LPC47B397-NC - sensor chip. - - This driver can also be built as a module. If so, the module - will be called smsc47b397. - -config SENSORS_SIS5595 - tristate "Silicon Integrated Systems Corp. SiS5595" - depends on I2C && PCI && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the integrated sensors in - SiS5595 South Bridges. - - This driver can also be built as a module. If so, the module - will be called sis5595. - -config SENSORS_SMSC47M1 - tristate "SMSC LPC47M10x and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the integrated fan - monitoring and control capabilities of the SMSC LPC47B27x, - LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips. - - This driver can also be built as a module. If so, the module - will be called smsc47m1. - -config SENSORS_VIA686A - tristate "VIA686A" - depends on I2C && PCI - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the integrated sensors in - Via 686A/B South Bridges. - - This driver can also be built as a module. If so, the module - will be called via686a. - -config SENSORS_W83781D - tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for the Winbond W8378x series - of sensor chips: the W83781D, W83782D, W83783S and W83627HF, - and the similar Asus AS99127F. - - This driver can also be built as a module. If so, the module - will be called w83781d. - -config SENSORS_W83L785TS - tristate "Winbond W83L785TS-S" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for the Winbond W83L785TS-S - sensor chip, which is used on the Asus A7N8X, among other - motherboards. - - This driver can also be built as a module. If so, the module - will be called w83l785ts. - -config SENSORS_W83627HF - tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the Winbond W836X7 series - of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF - - This driver can also be built as a module. If so, the module - will be called w83627hf. - -config SENSORS_W83627EHF - tristate "Winbond W83627EHF" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get preliminary support for the hardware - monitoring functionality of the Winbond W83627EHF Super-I/O chip. - Only fan and temperature inputs are supported at the moment, while - the chip does much more than that. - - This driver can also be built as a module. If so, the module - will be called w83627ehf. - -endmenu - -menu "Other I2C Chip support" +menu "Miscellaneous I2C Chip support" depends on I2C config SENSORS_DS1337 diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index b5e6d2f84f9..a876dd42b86 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -1,52 +1,16 @@ # -# Makefile for sensor and "other" I2C chip drivers. +# Makefile for miscellaneous I2C chip drivers. # -# asb100, then w83781d go first, as they can override other drivers' addresses. -obj-$(CONFIG_SENSORS_ASB100) += asb100.o -obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o -obj-$(CONFIG_SENSORS_W83781D) += w83781d.o - -obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o -obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o -obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o -obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o -obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o -obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_DS1337) += ds1337.o obj-$(CONFIG_SENSORS_DS1374) += ds1374.o -obj-$(CONFIG_SENSORS_DS1621) += ds1621.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o -obj-$(CONFIG_SENSORS_FSCHER) += fscher.o -obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o -obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o -obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o -obj-$(CONFIG_SENSORS_IT87) += it87.o -obj-$(CONFIG_SENSORS_LM63) += lm63.o -obj-$(CONFIG_SENSORS_LM75) += lm75.o -obj-$(CONFIG_SENSORS_LM77) += lm77.o -obj-$(CONFIG_SENSORS_LM78) += lm78.o -obj-$(CONFIG_SENSORS_LM80) += lm80.o -obj-$(CONFIG_SENSORS_LM83) += lm83.o -obj-$(CONFIG_SENSORS_LM85) += lm85.o -obj-$(CONFIG_SENSORS_LM87) += lm87.o -obj-$(CONFIG_SENSORS_LM90) += lm90.o -obj-$(CONFIG_SENSORS_LM92) += lm92.o -obj-$(CONFIG_SENSORS_MAX1619) += max1619.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_M41T00) += m41t00.o -obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o -obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o -obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o -obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o -obj-$(CONFIG_SENSORS_VIA686A) += via686a.o -obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o -obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o - obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o |