diff options
Diffstat (limited to 'drivers')
192 files changed, 297 insertions, 290 deletions
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 9ac4e378992..3aadded05a0 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -599,7 +599,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1028, 0x02b0 }, /* ICH7 on unknown Dell */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ - { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unkown HP */ + { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unknown HP */ { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */ { 0x27DF, 0x152D, 0x0778 }, /* ICH7 on unknown Intel */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index d344db42a00..0d9d2f20788 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -43,9 +43,9 @@ enum { /* * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and * chained indirect PRDEs upto a max count of 63. - * We are allocating an array of 63 PRDEs contigiously, but PRDE#15 will + * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will * be setup as an indirect descriptor, pointing to it's next - * (contigious) PRDE. Though chained indirect PRDE arrays are + * (contiguous) PRDE. Though chained indirect PRDE arrays are * supported,it will be more efficient to use a direct PRDT and * a single chain/link to indirect PRDE array/PRDT. */ @@ -314,7 +314,7 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, u32 ttl_dwords = 0; /* - * NOTE : direct & indirect prdt's are contigiously allocated + * NOTE : direct & indirect prdt's are contiguously allocated */ struct prde *prd = (struct prde *)&((struct command_desc *) cmd_desc)->prdt; diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index b2c1b37ab2e..f734b345ac7 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -1132,7 +1132,7 @@ static int rx_pkt(struct atm_dev *dev) IF_ERR(printk(" cause: packet time out\n");) } else { - IF_ERR(printk(" cause: buffer over flow\n");) + IF_ERR(printk(" cause: buffer overflow\n");) } goto out_free_desc; } diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 979d159b5cd..ee95c76bfd3 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -188,7 +188,7 @@ EXPORT_SYMBOL_GPL(wait_for_device_probe); * @dev: device to try to bind to the driver * * This function returns -ENODEV if the device is not registered, - * 1 if the device is bound sucessfully and 0 otherwise. + * 1 if the device is bound successfully and 0 otherwise. * * This function must be called with @dev->sem held. When called for a * USB interface, @dev->parent->sem must be held as well. diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index 5b33b85790f..63bfc543679 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -535,7 +535,7 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv) break; default: - BT_ERR("Unknow packet type:%d", type); + BT_ERR("Unknown packet type:%d", type); print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload, blksz * buf_block_len); diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 4895f0e0532..aa0919386b8 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -214,7 +214,7 @@ static int hci_uart_send_frame(struct sk_buff *skb) struct hci_uart *hu; if (!hdev) { - BT_ERR("Frame for uknown device (hdev=NULL)"); + BT_ERR("Frame for unknown device (hdev=NULL)"); return -ENODEV; } diff --git a/drivers/char/mem.c b/drivers/char/mem.c index a074fceb67d..42e65cf8ab5 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -5,7 +5,7 @@ * * Added devfs support. * Jan-11-1998, C. Scott Ananian <cananian@alumni.princeton.edu> - * Shared /dev/zero mmaping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com> + * Shared /dev/zero mmapping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com> */ #include <linux/mm.h> diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index 1997270bb6f..ecb89d798e3 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -248,7 +248,7 @@ static const struct vm_operations_struct mspec_vm_ops = { /* * mspec_mmap * - * Called when mmaping the device. Initializes the vma with a fault handler + * Called when mmapping the device. Initializes the vma with a fault handler * and private data structure necessary to allocate, track, and free the * underlying pages. */ diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index 6934025a1ac..c1d8b54c816 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -602,7 +602,7 @@ static void receive_char(struct r3964_info *pInfo, const unsigned char c) } break; case R3964_WAIT_FOR_RX_REPEAT: - /* FALLTROUGH */ + /* FALLTHROUGH */ case R3964_IDLE: if (c == STX) { /* Prevent rx_queue from overflow: */ diff --git a/drivers/char/rio/route.h b/drivers/char/rio/route.h index 20ed73f3fd7..46e963771c3 100644 --- a/drivers/char/rio/route.h +++ b/drivers/char/rio/route.h @@ -67,7 +67,7 @@ typedef struct COST_ROUTE COST_ROUTE; struct COST_ROUTE { unsigned char cost; /* Cost down this link */ - unsigned char route[NODE_BYTES]; /* Nodes thorough this route */ + unsigned char route[NODE_BYTES]; /* Nodes through this route */ }; typedef struct ROUTE_STR ROUTE_STR; diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index 5f753fc0873..09ad9154d86 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -863,7 +863,7 @@ static int hifn_init_pubrng(struct hifn_device *dev) dev->dmareg |= HIFN_DMAIER_PUBDONE; hifn_write_1(dev, HIFN_1_DMA_IER, dev->dmareg); - dprintk("Chip %s: Public key engine has been sucessfully " + dprintk("Chip %s: Public key engine has been successfully " "initialised.\n", dev->name); } diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 7585c4164bd..c52ac9efd0b 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -99,7 +99,7 @@ static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan, } /** - * atc_desc_get - get a unsused descriptor from free_list + * atc_desc_get - get an unused descriptor from free_list * @atchan: channel we want a new descriptor for */ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c index fddf2b35893..d373d17257e 100644 --- a/drivers/firewire/core-topology.c +++ b/drivers/firewire/core-topology.c @@ -183,7 +183,7 @@ static inline struct fw_node *fw_node(struct list_head *l) * This function builds the tree representation of the topology given * by the self IDs from the latest bus reset. During the construction * of the tree, the function checks that the self IDs are valid and - * internally consistent. On succcess this function returns the + * internally consistent. On success this function returns the * fw_node corresponding to the local card otherwise NULL. */ static struct fw_node *build_tree(struct fw_card *card, diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 5cae0b3eee9..3f7c500b211 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -272,7 +272,7 @@ EXPORT_SYMBOL(drm_mode_object_find); * functions & device file and adds it to the master fd list. * * RETURNS: - * Zero on success, error code on falure. + * Zero on success, error code on failure. */ int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, const struct drm_framebuffer_funcs *funcs) @@ -2328,7 +2328,7 @@ int drm_mode_connector_property_set_ioctl(struct drm_device *dev, } else if (connector->funcs->set_property) ret = connector->funcs->set_property(connector, property, out_resp->value); - /* store the property value if succesful */ + /* store the property value if successful */ if (!ret) drm_connector_property_set_value(connector, property, out_resp->value); out: diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index abfc27b0c2e..a2a3fa59992 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1309,7 +1309,7 @@ out_free_list: * i915_gem_release_mmap - remove physical page mappings * @obj: obj in question * - * Preserve the reservation of the mmaping with the DRM core code, but + * Preserve the reservation of the mmapping with the DRM core code, but * relinquish ownership of the pages back to the system. * * It is vital that we remove the page mapping if we have mapped a tiled diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 2b0fe54cd92..40fcf6fdef3 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -70,7 +70,7 @@ static struct drm_fb_helper_funcs intel_fb_helper_funcs = { /** - * Curretly it is assumed that the old framebuffer is reused. + * Currently it is assumed that the old framebuffer is reused. * * LOCKING * caller should hold the mode config lock. diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 083bec2e50f..e7fa3279e2f 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2726,7 +2726,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) /* Wrap with our custom algo which switches to DDC mode */ intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo; - /* In defaut case sdvo lvds is false */ + /* In default case sdvo lvds is false */ intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); if (intel_sdvo_output_setup(intel_output, diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 609719490ec..00c739c4484 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -389,11 +389,11 @@ int r600_mc_init(struct radeon_device *rdev) * AGP so that GPU can catch out of VRAM/AGP access */ if (rdev->mc.gtt_location > rdev->mc.mc_vram_size) { - /* Enought place before */ + /* Enough place before */ rdev->mc.vram_location = rdev->mc.gtt_location - rdev->mc.mc_vram_size; } else if (tmp > rdev->mc.mc_vram_size) { - /* Enought place after */ + /* Enough place after */ rdev->mc.vram_location = rdev->mc.gtt_location + rdev->mc.gtt_size; } else { diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index b38c4c8e2c6..d10eb43645c 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -59,7 +59,7 @@ static struct fb_ops radeonfb_ops = { }; /** - * Curretly it is assumed that the old framebuffer is reused. + * Currently it is assumed that the old framebuffer is reused. * * LOCKING * caller should hold the mode config lock. diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c index 38537d971a3..067167cb39c 100644 --- a/drivers/gpu/drm/radeon/radeon_state.c +++ b/drivers/gpu/drm/radeon/radeon_state.c @@ -1950,7 +1950,7 @@ static void radeon_apply_surface_regs(int surf_index, * Note that refcount can be at most 2, since during a free refcount=3 * might mean we have to allocate a new surface which might not always * be available. - * For example : we allocate three contigous surfaces ABC. If B is + * For example : we allocate three contiguous surfaces ABC. If B is * freed, we suddenly need two surfaces to store A and C, which might * not always be available. */ diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 765bd184b6f..5a664000bf7 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -372,7 +372,7 @@ static int radeon_bo_move(struct ttm_buffer_object *bo, new_mem->mem_type == TTM_PL_SYSTEM) || (old_mem->mem_type == TTM_PL_SYSTEM && new_mem->mem_type == TTM_PL_TT)) { - /* bind is enought */ + /* bind is enough */ radeon_move_null(bo, new_mem); return 0; } diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 595ac638039..9e9826ace30 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -807,11 +807,11 @@ int rv770_mc_init(struct radeon_device *rdev) * AGP so that GPU can catch out of VRAM/AGP access */ if (rdev->mc.gtt_location > rdev->mc.mc_vram_size) { - /* Enought place before */ + /* Enough place before */ rdev->mc.vram_location = rdev->mc.gtt_location - rdev->mc.mc_vram_size; } else if (tmp > rdev->mc.mc_vram_size) { - /* Enought place after */ + /* Enough place after */ rdev->mc.vram_location = rdev->mc.gtt_location + rdev->mc.gtt_size; } else { diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index c70927ecda2..61c5572d2b9 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -427,7 +427,7 @@ static int ttm_bo_kmap_ttm(struct ttm_buffer_object *bo, /* * We need to use vmap to get the desired page protection - * or to make the buffer object look contigous. + * or to make the buffer object look contiguous. */ prot = (mem->placement & TTM_PL_FLAG_CACHED) ? PAGE_KERNEL : diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c index 36718150b47..e845b75ccee 100644 --- a/drivers/hwmon/adm1029.c +++ b/drivers/hwmon/adm1029.c @@ -432,7 +432,7 @@ static int adm1029_remove(struct i2c_client *client) } /* -function that update the status of the chips (temperature for exemple) +function that update the status of the chips (temperature for example) */ static struct adm1029_data *adm1029_update_device(struct device *dev) { diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index fc36cadf36f..c48a284b831 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -928,7 +928,7 @@ static void lm93_update_client_common(struct lm93_data *data, data->prochot_interval = lm93_read_byte(client, LM93_REG_PROCHOT_INTERVAL); - /* Fan Boost Termperature registers */ + /* Fan Boost Temperature registers */ for (i = 0; i < 4; i++) data->boost[i] = lm93_read_byte(client, LM93_REG_BOOST(i)); diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index 2cd00b5b45b..9fd4a0d3206 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -125,7 +125,7 @@ 0 - no debugging messages 1 - some debugging messages, but none during DMA frame transmission 2 - lots of messages, including during DMA frame transmission - (will cause undeflows if your machine is too slow!) + (will cause underflows if your machine is too slow!) */ #define DV1394_DEBUG_LEVEL 0 diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 4bd39c8af80..37d12e5efa4 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -381,7 +381,7 @@ static const ipath_err_t infinipath_hwe_htclnkbbyte1crcerr = #define IPATH_GPIO_SCL \ (1ULL << (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT)) -/* keep the code below somewhat more readonable; not used elsewhere */ +/* keep the code below somewhat more readable; not used elsewhere */ #define _IPATH_HTLINK0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \ infinipath_hwe_htclnkabyte1crcerr) #define _IPATH_HTLINK1_CRCBITS (infinipath_hwe_htclnkbbyte0crcerr | \ diff --git a/drivers/infiniband/hw/ipath/ipath_sd7220.c b/drivers/infiniband/hw/ipath/ipath_sd7220.c index aa47eb54952..2a68d9f624d 100644 --- a/drivers/infiniband/hw/ipath/ipath_sd7220.c +++ b/drivers/infiniband/hw/ipath/ipath_sd7220.c @@ -614,7 +614,7 @@ static int epb_trans(struct ipath_devdata *dd, u16 reg, u64 i_val, u64 *o_vp) * @wd: Write Data - value to set in register * @mask: ones where data should be spliced into reg. * - * Basic register read/modify/write, with un-needed acesses elided. That is, + * Basic register read/modify/write, with un-needed accesses elided. That is, * a mask of zero will prevent write, while a mask of 0xFF will prevent read. * returns current (presumed, if a write was done) contents of selected * register, or <0 if errors. @@ -989,7 +989,7 @@ static struct rxeq_init { /* Set DFELTHFDR/HDR thresholds */ RXEQ_VAL(7, 8, 0, 0, 0, 0), /* FDR */ RXEQ_VAL(7, 0x21, 0, 0, 0, 0), /* HDR */ - /* Set TLTHFDR/HDR theshold */ + /* Set TLTHFDR/HDR threshold */ RXEQ_VAL(7, 9, 2, 2, 2, 2), /* FDR */ RXEQ_VAL(7, 0x23, 2, 2, 2, 2), /* HDR */ /* Set Preamp setting 2 (ZFR/ZCNT) */ diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 219b10397b4..256a00c6aee 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -352,7 +352,7 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, * anymore, so we do this only if selective signaling is off. * * Further, on 32-bit platforms, we can't use vmap() to make - * the QP buffer virtually contigious. Thus we have to use + * the QP buffer virtually contiguous. Thus we have to use * constant-sized WRs to make sure a WR is always fully within * a single page-sized chunk. * diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 1c9410d1822..bcc2d30ec24 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -955,7 +955,7 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed); ret = hp_sdc_init(); - /* after sucessfull initialization give SDC some time to settle + /* after successfull initialization give SDC some time to settle * and then load the hp_sdc_mlc upper layer driver */ if (!ret) schedule_delayed_work(&moduleloader_work, diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c index 820e51673b2..7d2b820ef58 100644 --- a/drivers/input/serio/hp_sdc_mlc.c +++ b/drivers/input/serio/hp_sdc_mlc.c @@ -125,7 +125,7 @@ static void hp_sdc_mlc_isr (int irq, void *dev_id, break; default: - printk(KERN_WARNING PREFIX "Unkown HIL Error status (%x)!\n", data); + printk(KERN_WARNING PREFIX "Unknown HIL Error status (%x)!\n", data); break; } diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c index 35377f583e2..a12242f77e2 100644 --- a/drivers/input/touchscreen/atmel-wm97xx.c +++ b/drivers/input/touchscreen/atmel-wm97xx.c @@ -59,7 +59,7 @@ #define ATMEL_WM97XX_AC97C_IRQ (29) #define ATMEL_WM97XX_GPIO_DEFAULT (32+16) /* Pin 16 on port B. */ #else -#error Unkown CPU, this driver only supports AT32AP700X CPUs. +#error Unknown CPU, this driver only supports AT32AP700X CPUs. #endif struct continuous { diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index 8fc3b08deb3..6cdcf2a6e03 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -14,7 +14,7 @@ * * Notes: * This is a wm97xx extended touch driver to capture touch - * data in a continuous manner on the Intel XScale archictecture + * data in a continuous manner on the Intel XScale architecture * * Features: * - codecs supported:- WM9705, WM9712, WM9713 @@ -131,7 +131,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) /* When the AC97 queue has been drained we need to allow time * to buffer up samples otherwise we end up spinning polling * for samples. The controller can't have a suitably low - * threashold set to use the notifications it gives. + * threshold set to use the notifications it gives. */ schedule_timeout_uninterruptible(1); diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c index 41e4359c277..eca54dbdf49 100644 --- a/drivers/input/touchscreen/zylonite-wm97xx.c +++ b/drivers/input/touchscreen/zylonite-wm97xx.c @@ -96,7 +96,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) /* When the AC97 queue has been drained we need to allow time * to buffer up samples otherwise we end up spinning polling * for samples. The controller can't have a suitably low - * threashold set to use the notifications it gives. + * threshold set to use the notifications it gives. */ msleep(1); diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c index 3e6d17f42a9..66b7d7a8647 100644 --- a/drivers/isdn/capi/capidrv.c +++ b/drivers/isdn/capi/capidrv.c @@ -830,7 +830,7 @@ static void handle_controller(_cmsg * cmsg) case 0: break; case 1: s = "unknown class"; break; case 2: s = "unknown function"; break; - default: s = "unkown error"; break; + default: s = "unknown error"; break; } if (s) printk(KERN_INFO "capidrv-%d: %s from controller 0x%x function %d: %s\n", diff --git a/drivers/isdn/hardware/eicon/di.c b/drivers/isdn/hardware/eicon/di.c index b029d130eb2..cb14ae3e715 100644 --- a/drivers/isdn/hardware/eicon/di.c +++ b/drivers/isdn/hardware/eicon/di.c @@ -806,7 +806,7 @@ static void xdi_xlog_request (byte Adapter, byte Id, DELIVERY - indication entered isdn_rc function RNR=... - application had returned RNR=... after the look ahead callback - RNum=0 - aplication had not returned any buffer to copy + RNum=0 - application had not returned any buffer to copy this indication and will copy it self COMPLETE - XDI had copied the data to the buffers provided bu the application and is about to issue the diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c index 23960cb6eaa..e7cfb3b5647 100644 --- a/drivers/isdn/hardware/eicon/maintidi.c +++ b/drivers/isdn/hardware/eicon/maintidi.c @@ -385,7 +385,7 @@ static int SuperTraceMessageInput (void* hLib) { } break; default: - diva_mnt_internal_dprintf (0, DLI_ERR, "Unknon IDI Ind (DMA mode): %02x", Ind); + diva_mnt_internal_dprintf (0, DLI_ERR, "Unknown IDI Ind (DMA mode): %02x", Ind); } p += (this_ind_length+1); total_length -= (4 + this_ind_length); @@ -420,7 +420,7 @@ static int SuperTraceMessageInput (void* hLib) { } break; default: - diva_mnt_internal_dprintf (0, DLI_ERR, "Unknon IDI Ind: %02x", Ind); + diva_mnt_internal_dprintf (0, DLI_ERR, "Unknown IDI Ind: %02x", Ind); } } } diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index fc46a26cb14..a64bb6c67ba 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -721,7 +721,7 @@ hfcsusb_setup_bch(struct bchannel *bch, int protocol) switch (protocol) { case (-1): /* used for init */ bch->state = -1; - /* fall trough */ + /* fall through */ case (ISDN_P_NONE): if (bch->state == ISDN_P_NONE) return 0; /* already in idle state */ diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.h b/drivers/isdn/hardware/mISDN/hfcsusb.h index 43efe7358fa..369196adae0 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.h +++ b/drivers/isdn/hardware/mISDN/hfcsusb.h @@ -150,7 +150,7 @@ symbolic(struct hfcusb_symbolic_list list[], const int num) for (i = 0; list[i].name != NULL; i++) if (list[i].num == num) return list[i].name; - return "<unkown USB Error>"; + return "<unknown USB Error>"; } /* USB descriptor need to contain one of the following EndPoint combination: */ diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c index de352a17673..09095c74711 100644 --- a/drivers/isdn/hardware/mISDN/mISDNisar.c +++ b/drivers/isdn/hardware/mISDN/mISDNisar.c @@ -860,7 +860,7 @@ isar_pump_statev_modem(struct isar_ch *ch, u8 devt) { pr_debug("%s: pump stev GSTN CLEAR\n", ch->is->name); break; default: - pr_info("u%s: nknown pump stev %x\n", ch->is->name, devt); + pr_info("u%s: unknown pump stev %x\n", ch->is->name, devt); break; } } diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 9de54202c90..ad5831f37d8 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -1086,7 +1086,7 @@ hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg) break; default: DBG(HFCUSB_DBG_STATES, - "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x", pr); + "HFC_USB: hfc_usb_d_l2l1: unknown state : %#x", pr); break; } } diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index 2d14b64202a..0f4ea7d16a1 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -836,7 +836,7 @@ isdn_ppp_write(int min, struct file *file, const char __user *buf, int count) unsigned short hl; struct sk_buff *skb; /* - * we need to reserve enought space in front of + * we need to reserve enough space in front of * sk_buff. old call to dev_alloc_skb only reserved * 16 bytes, now we are looking what the driver want */ @@ -1326,7 +1326,7 @@ isdn_ppp_xmit(struct sk_buff *skb, struct net_device *netdev) struct sk_buff *new_skb; unsigned short hl; /* - * we need to reserve enought space in front of + * we need to reserve enough space in front of * sk_buff. old call to dev_alloc_skb only reserved * 16 bytes, now we are looking what the driver want. */ @@ -1685,7 +1685,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * * try to accomplish several tasks: * - reassemble any complete fragment sequence (non-null 'start' - * indicates there is a continguous sequence present) + * indicates there is a contiguous sequence present) * - discard any incomplete sequences that are below minseq -- due * to the fact that sender always increment sequence number, if there * is an incomplete sequence below minseq, no new fragments would diff --git a/drivers/isdn/i4l/isdn_ttyfax.c b/drivers/isdn/i4l/isdn_ttyfax.c index 78f7660c1d0..4c41f191d4e 100644 --- a/drivers/isdn/i4l/isdn_ttyfax.c +++ b/drivers/isdn/i4l/isdn_ttyfax.c @@ -470,7 +470,7 @@ isdn_tty_cmd_FCLASS2(char **p, modem_info * info) } return 0; } - /* BADMUL=value - dummy 0=disable errorchk disabled (treshold multiplier) */ + /* BADMUL=value - dummy 0=disable errorchk disabled (threshold multiplier) */ if (!strncmp(p[0], "BADMUL", 6)) { p[0] += 6; switch (*p[0]) { diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c index 77ee2867c8b..43ff4d3b046 100644 --- a/drivers/isdn/mISDN/dsp_core.c +++ b/drivers/isdn/mISDN/dsp_core.c @@ -110,7 +110,7 @@ * crossconnections and conferences via software if not possible through * hardware. If hardware capability is available, hardware is used. * - * Echo: Is generated by CMX and is used to check performane of hard and + * Echo: Is generated by CMX and is used to check performance of hard and * software CMX. * * The CMX has special functions for conferences with one, two and more diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c index e04bad6c5ba..6d4da609588 100644 --- a/drivers/isdn/mISDN/tei.c +++ b/drivers/isdn/mISDN/tei.c @@ -725,7 +725,7 @@ tei_id_ver_tout_net(struct FsmInst *fi, int event, void *arg) if (tm->rcnt == 1) { if (*debug & DEBUG_L2_TEI) tm->tei_m.printdebug(fi, - "check req for tei %d sucessful\n", tm->l2->tei); + "check req for tei %d successful\n", tm->l2->tei); mISDN_FsmChangeState(fi, ST_TEI_NOP); } else if (tm->rcnt > 1) { /* duplicate assignment; remove */ diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 8b9364434aa..3fbe41b0ac0 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -15,7 +15,7 @@ * * WARNING: This driver has only been testen on Apple's * 1.25 MHz Dual G4 (March 03). It is tuned for a CPU - * temperatur around 57 C. + * temperature around 57 C. * * Copyright (C) 2003, 2004 Samuel Rydh (samuel@ibrium.se) * diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c index 7e8f5681599..48cb154c7a4 100644 --- a/drivers/media/common/saa7146_i2c.c +++ b/drivers/media/common/saa7146_i2c.c @@ -98,7 +98,7 @@ static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, __le32 *op) op_count++; - /* loop throgh all bytes of message i */ + /* loop through all bytes of message i */ for(j = 0; j < m[i].len; j++) { /* write back all bytes that could have been read */ m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8)); diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 810f07d6324..52e4ce4304e 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -160,7 +160,7 @@ struct tuner_state { * search callback possible return status * * DVBFE_ALGO_SEARCH_SUCCESS - * The frontend search algorithm completed and returned succesfully + * The frontend search algorithm completed and returned successfully * * DVBFE_ALGO_SEARCH_ASLEEP * The frontend search algorithm is sleeping diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 2ae7f648eff..bb69f3719f9 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -344,7 +344,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) if (ret) return ret; - err("Unkown Anysee version: %02x %02x %02x. "\ + err("Unknown Anysee version: %02x %02x %02x. "\ "Please report the <linux-dvb@linuxtv.org>.", hw_info[0], hw_info[1], hw_info[2]); diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c index eeef50bff4f..5c0126dc1ff 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -242,7 +242,7 @@ static struct dvb_usb_device_properties dibusb1_1_properties = { { &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL }, { &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL }, }, - { "Unkown USB1.1 DVB-T device ???? please report the name to the author", + { "Unknown USB1.1 DVB-T device ???? please report the name to the author", { &dibusb_dib3000mb_table[13], NULL }, { &dibusb_dib3000mb_table[14], NULL }, }, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c index edde87c6aa3..6b5ded9e7d5 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c @@ -259,7 +259,7 @@ int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d, *state = REMOTE_KEY_REPEAT; break; default: - deb_err("unkown type of remote status: %d\n",keybuf[0]); + deb_err("unknown type of remote status: %d\n",keybuf[0]); break; } return 0; diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c index 9da2cc95ca1..f9702e3756b 100644 --- a/drivers/media/dvb/dvb-usb/usb-urb.c +++ b/drivers/media/dvb/dvb-usb/usb-urb.c @@ -56,7 +56,7 @@ static void usb_urb_complete(struct urb *urb) stream->complete(stream, b, urb->actual_length); break; default: - err("unkown endpoint type in completition handler."); + err("unknown endpoint type in completition handler."); return; } usb_submit_urb(urb,GFP_ATOMIC); @@ -228,7 +228,7 @@ int usb_urb_init(struct usb_data_stream *stream, struct usb_data_stream_properti case USB_ISOC: return usb_isoc_urb_init(stream); default: - err("unkown URB-type for data transfer."); + err("unknown URB-type for data transfer."); return -EINVAL; } } diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c index 74981ee923c..7c6431fe33e 100644 --- a/drivers/media/dvb/frontends/au8522_decoder.c +++ b/drivers/media/dvb/frontends/au8522_decoder.c @@ -315,7 +315,7 @@ static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode) if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 || input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) { /* Despite what the table says, for the HVR-950q we still need - to be in CVBS mode for the S-Video input (reason uknown). */ + to be in CVBS mode for the S-Video input (reason unknown). */ /* filter_coef_type = 3; */ filter_coef_type = 5; } else { diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c index ffbcfabd83f..00a4e8f0330 100644 --- a/drivers/media/dvb/frontends/cx24110.c +++ b/drivers/media/dvb/frontends/cx24110.c @@ -1,4 +1,4 @@ - /* +/* cx24110 - Single Chip Satellite Channel Receiver driver module Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de> based on @@ -96,7 +96,7 @@ static struct {u8 reg; u8 data;} cx24110_regdata[]= {0x42,0x00}, /* @ middle bytes " */ {0x43,0x00}, /* @ LSB " */ /* leave the carrier tracking loop parameters on default */ - /* leave the bit timing loop parameters at gefault */ + /* leave the bit timing loop parameters at default */ {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */ /* the cx24108 data sheet for symbol rates above 15MS/s */ {0x57,0x00}, /* @ Filter sigma delta enabled, positive */ diff --git a/drivers/media/dvb/frontends/cx24113.c b/drivers/media/dvb/frontends/cx24113.c index 075b2b57cf0..e9ee55592fd 100644 --- a/drivers/media/dvb/frontends/cx24113.c +++ b/drivers/media/dvb/frontends/cx24113.c @@ -589,7 +589,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe, info("detected CX24113 variant\n"); break; case REV_CX24113: - info("sucessfully detected\n"); + info("successfully detected\n"); break; default: err("unsupported device id: %x\n", state->rev); diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c index 136b9d2164d..ad4c8cfd809 100644 --- a/drivers/media/dvb/frontends/dib3000mb.c +++ b/drivers/media/dvb/frontends/dib3000mb.c @@ -154,7 +154,7 @@ static int dib3000mb_set_frontend(struct dvb_frontend* fe, case BANDWIDTH_AUTO: return -EOPNOTSUPP; default: - err("unkown bandwidth value."); + err("unknown bandwidth value."); return -EINVAL; } } diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c index 056387b41a8..43971e63baa 100644 --- a/drivers/media/dvb/frontends/lgdt330x.c +++ b/drivers/media/dvb/frontends/lgdt330x.c @@ -479,7 +479,7 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) switch (state->current_modulation) { case QAM_256: case QAM_64: - /* Need to undestand why there are 3 lock levels here */ + /* Need to understand why there are 3 lock levels here */ if ((buf[0] & 0x07) == 0x07) *status |= FE_HAS_CARRIER; break; @@ -520,7 +520,7 @@ static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status) switch (state->current_modulation) { case QAM_256: case QAM_64: - /* Need to undestand why there are 3 lock levels here */ + /* Need to understand why there are 3 lock levels here */ if ((buf[0] & 0x07) == 0x07) *status |= FE_HAS_CARRIER; else diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c index a04c782fff8..1570669837e 100644 --- a/drivers/media/dvb/frontends/stb0899_drv.c +++ b/drivers/media/dvb/frontends/stb0899_drv.c @@ -1571,7 +1571,7 @@ static enum dvbfe_search stb0899_search(struct dvb_frontend *fe, struct dvb_fron * stb0899_track * periodically check the signal level against a specified * threshold level and perform derotator centering. - * called once we have a lock from a succesful search + * called once we have a lock from a successful search * event. * * Will be called periodically called to maintain the diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 8d65c652ba5..baf3159a3aa 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -2425,7 +2425,7 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called */ saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); - /* set event counter 1 treshold to maximum allowed value (rEC p55) */ + /* set event counter 1 threshold to maximum allowed value (rEC p55) */ saa7146_write(dev, ECT1R, 0x3fff ); #endif /* Set RPS1 Address register to point to RPS code (r108 p42) */ @@ -2559,7 +2559,7 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, * use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called */ saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); - /* set event counter 1 treshold to maximum allowed value (rEC p55) */ + /* set event counter 1 threshold to maximum allowed value (rEC p55) */ saa7146_write(dev, ECT1R, 0x3fff ); #endif /* Setup BUDGETPATCH MAIN RPS1 "program" (p35) */ diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index 60136688a9a..9c92f9ddd22 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -456,7 +456,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled // use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); - // set event counter 1 treshold to maximum allowed value (rEC p55) + // set event counter 1 threshold to maximum allowed value (rEC p55) saa7146_write(dev, ECT1R, 0x3fff ); #endif // Fix VSYNC level diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index a1239083472..5f79acb56e4 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -28,7 +28,7 @@ * http://av-usbradio.sourceforge.net/index.php * http://sourceforge.net/projects/av-usbradio/ * Latest release of theirs project was in 2005. - * Probably, this driver could be improved trough using their + * Probably, this driver could be improved through using their * achievements (specifications given). * Also, Faidon Liambotis <paravoid@debian.org> wrote nice driver for this radio * in 2007. He allowed to use his driver to improve current mr800 radio driver. diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c index 28f48f41f21..c2174413ab2 100644 --- a/drivers/media/video/cx231xx/cx231xx-avcore.c +++ b/drivers/media/video/cx231xx/cx231xx-avcore.c @@ -2414,9 +2414,11 @@ int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev) cx231xx_info("No ACK after %d msec -GPIO I2C failed!", nInit * 10); - /* readAck - throuth clock stretch ,slave has given a SCL signal, - so the SDA data can be directly read. */ + /* + * readAck + * through clock stretch, slave has given a SCL signal, + * so the SDA data can be directly read. + */ status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val); if ((dev->gpio_val & 1 << dev->board.tuner_sda_gpio) == 0) { diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 45e13ee66dc..16c6a921f40 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -940,7 +940,7 @@ int cx23885_dvb_register(struct cx23885_tsport *port) int err, i; /* Here we need to allocate the correct number of frontends, - * as reflected in the cards struct. The reality is that currrently + * as reflected in the cards struct. The reality is that currently * no cx23885 boards support this - yet. But, if we don't modify this * code then the second frontend would never be allocated (later) * and fail with error before the attach in dvb_register(). diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index cf634606ba9..b35411160f0 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -624,7 +624,7 @@ int cx88_reset(struct cx88_core *core) /* setup image format */ cx_andor(MO_COLOR_CTRL, 0x4000, 0x4000); - /* setup FIFO Threshholds */ + /* setup FIFO Thresholds */ cx_write(MO_PDMA_STHRSH, 0x0807); cx_write(MO_PDMA_DTHRSH, 0x0807); diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/video/davinci/dm355_ccdc.c index 56fbefe036a..31439001637 100644 --- a/drivers/media/video/davinci/dm355_ccdc.c +++ b/drivers/media/video/davinci/dm355_ccdc.c @@ -285,7 +285,7 @@ static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam) if ((ccdcparam->med_filt_thres < 0) || (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) { - dev_dbg(dev, "Invalid value of median filter thresold\n"); + dev_dbg(dev, "Invalid value of median filter threshold\n"); return -EINVAL; } diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/video/davinci/vpss.c index 6d709ca8cfb..453236bd755 100644 --- a/drivers/media/video/davinci/vpss.c +++ b/drivers/media/video/davinci/vpss.c @@ -53,7 +53,7 @@ struct vpss_hw_ops { int (*enable_clock)(enum vpss_clock_sel clock_sel, int en); /* select input to ccdc */ void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel); - /* clear wbl overlflow bit */ + /* clear wbl overflow bit */ int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel); }; diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index cf3af8de6e9..e39efb45fa1 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -304,7 +304,7 @@ static const __u8 initOv6650[] = { }; static const __u8 ov6650_sensor_init[][8] = { - /* Bright, contrast, etc are set througth SCBB interface. + /* Bright, contrast, etc are set through SCBB interface. * AVCAP on win2 do not send any data on this controls. */ /* Anyway, some registers appears to alter bright and constrat */ diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index fab7ef85a6c..7dbd5eea6cc 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -589,7 +589,7 @@ static void spca500_reinit(struct gspca_dev *gspca_dev) int err; __u8 Data; - /* some unknow command from Aiptek pocket dv and family300 */ + /* some unknown command from Aiptek pocket dv and family300 */ reg_w(gspca_dev, 0x00, 0x0d01, 0x01); reg_w(gspca_dev, 0x00, 0x0d03, 0x00); diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index b74a34218da..66f9f005614 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -1636,7 +1636,7 @@ static const __u16 spca501c_arowana_init_data[][3] = { {} }; -/* Unknow camera from Ori Usbid 0x0000:0x0000 */ +/* Unknown camera from Ori Usbid 0x0000:0x0000 */ /* Based on snoops from Ori Cohen */ static const __u16 spca501c_mysterious_open_data[][3] = { {0x02, 0x000f, 0x0005}, @@ -1945,7 +1945,7 @@ static int sd_init(struct gspca_dev *gspca_dev) goto error; break; case MystFromOriUnknownCamera: - /* UnKnow Ori CMOS Camera data */ + /* Unknown Ori CMOS Camera data */ if (write_vector(gspca_dev, spca501c_mysterious_open_data)) goto error; break; @@ -1978,7 +1978,7 @@ static int sd_start(struct gspca_dev *gspca_dev) write_vector(gspca_dev, spca501c_arowana_open_data); break; case MystFromOriUnknownCamera: - /* UnKnow CMOS Camera data */ + /* Unknown CMOS Camera data */ write_vector(gspca_dev, spca501c_mysterious_init_data); break; default: diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index aa8f995ce04..1a9af2ebdbe 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -631,7 +631,7 @@ static void spca504A_acknowledged_command(struct gspca_dev *gspca_dev, count = 200; while (--count > 0) { msleep(10); - /* gsmart mini2 write a each wait setting 1 ms is enought */ + /* gsmart mini2 write a each wait setting 1 ms is enough */ /* reg_w_riv(dev, req, idx, val); */ status = reg_r_12(gspca_dev, 0x01, 0x0001, 1); if (status == endcode) { diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index cdf3357b4c9..49c3c1226e0 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7065,7 +7065,7 @@ static int sd_config(struct gspca_dev *gspca_dev, break; default: PDEBUG(D_PROBE, - "Sensor UNKNOW_0 force Tas5130"); + "Sensor UNKNOWN_0 force Tas5130"); sd->sensor = SENSOR_TAS5130CXX; } break; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index 5b152ff20bd..5fcad28211d 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -332,7 +332,7 @@ struct pvr2_hdw { /* Bit mask of PVR2_CVAL_INPUT choices which are valid for the hardware */ unsigned int input_avail_mask; - /* Bit mask of PVR2_CVAL_INPUT choices which are currenly allowed */ + /* Bit mask of PVR2_CVAL_INPUT choices which are currently allowed */ unsigned int input_allowed_mask; /* Location of eeprom or a negative number if none */ diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 9e3262c0ba3..a4c84368eb1 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -1985,7 +1985,7 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) wake_up(&dev->fw_data->wait_fw); break; default: - printk(KERN_INFO "s2255 unknwn resp\n"); + printk(KERN_INFO "s2255 unknown resp\n"); } default: pdata++; diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index d439c76b27e..cb1de7ea197 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -106,7 +106,7 @@ struct zoran_params { unsigned long jpeg_markers; /* Which markers should go into the JPEG output. * Unless you exactly know what you do, leave them untouched. * Inluding less markers will make the resulting code - * smaller, but there will be fewer aplications + * smaller, but there will be fewer applications * which can read it. * The presence of the APP and COM marker is * influenced by APP0_len and COM_len ONLY! */ diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index d505b68cd37..e39986a7827 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -940,7 +940,7 @@ static const struct block_device_operations i2o_block_fops = { * Allocate memory for the i2o_block_device struct, gendisk and request * queue and initialize them as far as no additional information is needed. * - * Returns a pointer to the allocated I2O Block device on succes or a + * Returns a pointer to the allocated I2O Block device on success or a * negative error code on failure. */ static struct i2o_block_device *i2o_block_device_alloc(void) diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 27cf4af0e13..e5ab6214150 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -132,7 +132,7 @@ u32 i2o_cntxt_list_add(struct i2o_controller * c, void *ptr) * Removes a previously added pointer from the context list and returns * the matching context id. * - * Returns context id on succes or 0 on failure. + * Returns context id on success or 0 on failure. */ u32 i2o_cntxt_list_remove(struct i2o_controller * c, void *ptr) { @@ -198,7 +198,7 @@ void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context) * @c: controller to which the context list belong * @ptr: pointer to which the context id should be fetched * - * Returns context id which matches to the pointer on succes or 0 on + * Returns context id which matches to the pointer on success or 0 on * failure. */ u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr) diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 41c8fe2a928..ce5eda985ab 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -92,7 +92,7 @@ static void gru_vma_close(struct vm_area_struct *vma) /* * gru_file_mmap * - * Called when mmaping the device. Initializes the vma with a fault handler + * Called when mmapping the device. Initializes the vma with a fault handler * and private data structure necessary to allocate, track, and free the * underlying pages. */ diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 99b74a35102..941a4d35ef8 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1360,7 +1360,7 @@ static struct mmc_host_ops s3cmci_ops = { static struct s3c24xx_mci_pdata s3cmci_def_pdata = { /* This is currently here to avoid a number of if (host->pdata) - * checks. Any zero fields to ensure reaonable defaults are picked. */ + * checks. Any zero fields to ensure reasonable defaults are picked. */ }; #ifdef CONFIG_CPU_FREQ diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 3aa05cd18ea..592016a0668 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -18,7 +18,7 @@ to specify the offset instead of the absolute address NOTE: - With slram it's only possible to map a contigous memory region. Therfore + With slram it's only possible to map a contiguous memory region. Therefore if there's a device mapped somewhere in the region specified slram will fail to load (see kernel log if modprobe fails). diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index e51c1ed7ac1..b126cf88747 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1056,7 +1056,7 @@ static struct nand_ecclayout doc200x_oobinfo = { }; /* Find the (I)NFTL Media Header, and optionally also the mirror media header. - On sucessful return, buf will contain a copy of the media header for + On successful return, buf will contain a copy of the media header for further processing. id is the string to scan for, and will presumably be either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media header. The page #s of the found media headers are placed in mh0_page and diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index db7ae9d6a29..92320a64327 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -475,7 +475,7 @@ int __nand_correct_data(unsigned char *buf, * * The b2 shift is there to get rid of the lowest two bits. * We could also do addressbits[b2] >> 1 but for the - * performace it does not make any difference + * performance it does not make any difference */ if (eccsize_mult == 1) byte_addr = (addressbits[b1] << 4) + addressbits[b0]; diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 11dc7e69c4f..68b5b3a486a 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -875,7 +875,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, * @info: The controller instance. * @nmtd: The driver version of the MTD instance. * - * This routine is called after the chip probe has succesfully completed + * This routine is called after the chip probe has successfully completed * and the relevant per-chip information updated. This call ensure that * we update the internal state accordingly. * diff --git a/drivers/net/82596.c b/drivers/net/82596.c index ea6b139b812..1663bc9e45d 100644 --- a/drivers/net/82596.c +++ b/drivers/net/82596.c @@ -19,7 +19,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index 4e6359fff0e..766aabfdfc7 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -1633,8 +1633,13 @@ static int amd8111e_enable_link_change(struct amd8111e_priv* lp) readl(lp->mmio + CMD7); return 0; } -/* This function is called when a packet transmission fails to complete within a resonable period, on the assumption that an interrupts have been failed or the interface is locked up. This function will reinitialize the hardware */ +/* + * This function is called when a packet transmission fails to complete + * within a reasonable period, on the assumption that an interrupt have + * failed or the interface is locked up. This function will reinitialize + * the hardware. + */ static void amd8111e_tx_timeout(struct net_device *dev) { struct amd8111e_priv* lp = netdev_priv(dev); diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index b5dc7f55072..9d828aed968 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -120,7 +120,7 @@ static int irq = 5; /* Default IRQ */ * DAYNA driver mode: * Dayna DL2000/DaynaTalk PC (Half Length), COPS LT-95, * Farallon PhoneNET PC III, Farallon PhoneNET PC II - * Other cards possibly supported mode unkown though: + * Other cards possibly supported mode unknown though: * Dayna DL2000 (Full length), COPS LT/M (Micro-Channel) * * Cards NOT supported by this driver but supported by the ltpc.c diff --git a/drivers/net/ariadne.h b/drivers/net/ariadne.h index bb613f292e0..727be5cdd1e 100644 --- a/drivers/net/ariadne.h +++ b/drivers/net/ariadne.h @@ -244,7 +244,7 @@ struct Am79C960 { #define DLNKTST 0x0010 /* Disable Link Status */ #define DAPC 0x0008 /* Disable Automatic Polarity Correction */ #define MENDECL 0x0004 /* MENDEC Loopback Mode */ -#define LRTTSEL 0x0002 /* Low Receive Treshold/Transmit Mode Select */ +#define LRTTSEL 0x0002 /* Low Receive Threshold/Transmit Mode Select */ #define PORTSEL1 0x0001 /* Port Select Bits */ #define PORTSEL2 0x8000 /* Port Select Bits */ #define INTL 0x4000 /* Internal Loopback */ diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c index 1372e9a99f5..96506eacc13 100644 --- a/drivers/net/atl1c/atl1c_main.c +++ b/drivers/net/atl1c/atl1c_main.c @@ -1543,7 +1543,7 @@ static irqreturn_t atl1c_intr(int irq, void *data) if (status & ISR_OVER) if (netif_msg_intr(adapter)) dev_warn(&pdev->dev, - "TX/RX over flow (status = 0x%x)\n", + "TX/RX overflow (status = 0x%x)\n", status & ISR_OVER); /* link event */ diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 49953787e41..f0bb62b5ca9 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -435,7 +435,7 @@ enum be_if_flags { * filtering capabilities. */ struct be_cmd_req_if_create { struct be_cmd_req_hdr hdr; - u32 version; /* ignore currntly */ + u32 version; /* ignore currently */ u32 capability_flags; u32 enable_flags; u8 mac_addr[ETH_ALEN]; diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 1f941f02771..02a0908707e 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1876,7 +1876,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func) goto fw_exit; } - dev_info(&adapter->pdev->dev, "Firmware flashed succesfully\n"); + dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n"); fw_exit: release_firmware(fw); diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index aa76cbada5e..732eafdeb0f 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -2536,7 +2536,7 @@ /* [RC 1] A flag to indicate that overflow error occurred in one of the queues. */ #define QM_REG_OVFERROR 0x16805c -/* [RC 7] the Q were the qverflow occurs */ +/* [RC 7] the Q where the overflow occurs */ #define QM_REG_OVFQNUM 0x168058 /* [R 16] Pause state for physical queues 15-0 */ #define QM_REG_PAUSESTATE0 0x168410 diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index f86612857a7..56ba872be9c 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -1285,7 +1285,7 @@ netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev) /* * We do not use Tx completion interrupts to free DMAd Tx packets. - * This is good for performamce but means that we rely on new Tx + * This is good for performance but means that we rely on new Tx * packets arriving to run the destructors of completed packets, * which open up space in their sockets' send queues. Sometimes * we do not get such new packets causing Tx to stall. A single diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c index d7688522336..75b099ce49c 100644 --- a/drivers/net/ehea/ehea_ethtool.c +++ b/drivers/net/ehea/ehea_ethtool.c @@ -118,7 +118,7 @@ doit: ret = ehea_set_portspeed(port, sp); if (!ret) - ehea_info("%s: Port speed succesfully set: %dMbps " + ehea_info("%s: Port speed successfully set: %dMbps " "%s Duplex", port->netdev->name, port->port_speed, port->full_duplex == 1 ? "Full" : "Half"); @@ -134,7 +134,7 @@ static int ehea_nway_reset(struct net_device *dev) ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG); if (!ret) - ehea_info("%s: Port speed succesfully set: %dMbps " + ehea_info("%s: Port speed successfully set: %dMbps " "%s Duplex", port->netdev->name, port->port_speed, port->full_duplex == 1 ? "Full" : "Half"); diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index ed60fd66427..0cab992b3d1 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -35,7 +35,7 @@ * driver only supports standard serial hardware (8250, 16450, 16550A) * * This modem usually draws its supply current out of the otherwise unused - * TXD pin of the serial port. Thus a contignuous stream of 0x00-bytes + * TXD pin of the serial port. Thus a contiguous stream of 0x00-bytes * is transmitted to achieve a positive supply voltage. * * hsk: This is a 4800 baud FSK modem, designed for TNC use. It works fine diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index aa7286bc436..8739ba850f8 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -1384,7 +1384,7 @@ static inline void veth_build_dma_list(struct dma_chunk *list, unsigned long done; int i = 1; - /* FIXME: skbs are continguous in real addresses. Do we + /* FIXME: skbs are contiguous in real addresses. Do we * really need to break it into PAGE_SIZE chunks, or can we do * it just at the granularity of iSeries real->absolute * mapping? Indeed, given the way the allocator works, can we diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index a0c578585a5..b77238dbafb 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -47,7 +47,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c index 51e11c3e53e..c0dbfc185b5 100644 --- a/drivers/net/lib82596.c +++ b/drivers/net/lib82596.c @@ -47,7 +47,7 @@ TBD: * look at deferring rx frames rather than discarding (as per tulip) * handle tx ring full as per tulip - * performace test to tune rx_copybreak + * performance test to tune rx_copybreak Most of my modifications relate to the braindead big-endian implementation by Intel. When the i596 is operating in diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 03b781a7a18..829b9ec9ff6 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -204,7 +204,7 @@ static void mlx4_en_free_rx_desc(struct mlx4_en_priv *priv, en_dbg(DRV, priv, "Freeing fragment:%d\n", nr); dma = be64_to_cpu(rx_desc->data[nr].addr); - en_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma); + en_dbg(DRV, priv, "Unmapping buffer at dma:0x%llx\n", (u64) dma); pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size, PCI_DMA_FROMDEVICE); put_page(skb_frags[nr].page); diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index 8c7279965b4..3d1396af946 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -47,7 +47,7 @@ enum { static int inline_thold __read_mostly = MAX_INLINE; module_param_named(inline_thold, inline_thold, int, 0444); -MODULE_PARM_DESC(inline_thold, "treshold for using inline data"); +MODULE_PARM_DESC(inline_thold, "threshold for using inline data"); int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring, u32 size, diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index 4376147b0ea..82c3ebc584e 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -162,7 +162,7 @@ enum { #define MLX4_EN_DEF_RX_PAUSE 1 #define MLX4_EN_DEF_TX_PAUSE 1 -/* Interval between sucessive polls in the Tx routine when polling is used +/* Interval between successive polls in the Tx routine when polling is used instead of interrupts (in per-core Tx rings) - should be power of 2 */ #define MLX4_EN_TX_POLL_MODER 16 #define MLX4_EN_TX_POLL_TIMEOUT (HZ / 4) diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c index b211613e9db..86fde1a90a5 100644 --- a/drivers/net/ps3_gelic_net.c +++ b/drivers/net/ps3_gelic_net.c @@ -296,7 +296,7 @@ static void gelic_card_reset_chain(struct gelic_card *card, * @card: card structure * @descr: descriptor to re-init * - * return 0 on succes, <0 on failure + * return 0 on success, <0 on failure * * allocates a new rx skb, iommu-maps it and attaches it to the descriptor. * Activate the descriptor state-wise diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index c072f7f36ac..9d94a141555 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1760,7 +1760,7 @@ static int sis900_rx(struct net_device *net_dev) sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - /* refill the Rx buffer, what if there is not enought + /* refill the Rx buffer, what if there is not enough * memory for new socket buffer ?? */ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { /* @@ -1775,7 +1775,7 @@ static int sis900_rx(struct net_device *net_dev) } /* This situation should never happen, but due to - some unknow bugs, it is possible that + some unknown bugs, it is possible that we are working on NULL sk_buff :-( */ if (sis_priv->rx_skbuff[entry] == NULL) { if (netif_msg_rx_err(sis_priv)) diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/skfp/h/smc.h index 1758d954836..026a83b9f74 100644 --- a/drivers/net/skfp/h/smc.h +++ b/drivers/net/skfp/h/smc.h @@ -393,10 +393,10 @@ struct smt_config { */ u_long mac_d_max ; /* MAC : D_Max timer value */ - u_long lct_short ; /* LCT : error threshhold */ - u_long lct_medium ; /* LCT : error threshhold */ - u_long lct_long ; /* LCT : error threshhold */ - u_long lct_extended ; /* LCT : error threshhold */ + u_long lct_short ; /* LCT : error threshold */ + u_long lct_medium ; /* LCT : error threshold */ + u_long lct_long ; /* LCT : error threshold */ + u_long lct_extended ; /* LCT : error threshold */ } ; #ifdef DEBUG diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index b27156eaf26..db216a72850 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -1002,7 +1002,7 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) } break; default: - printk("ioctl for %s: unknow cmd: %04x\n", dev->name, ioc.cmd); + printk("ioctl for %s: unknown cmd: %04x\n", dev->name, ioc.cmd); status = -EOPNOTSUPP; } // switch diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index ccdd196f529..4a00940d0a5 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -816,7 +816,7 @@ static int smsc911x_mii_probe(struct net_device *dev) SMSC_TRACE(HW, "Passed Loop Back Test"); #endif /* USE_PHY_WORK_AROUND */ - SMSC_TRACE(HW, "phy initialised succesfully"); + SMSC_TRACE(HW, "phy initialised successfully"); return 0; } diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h index b5716bd8a59..016360c65ce 100644 --- a/drivers/net/smsc911x.h +++ b/drivers/net/smsc911x.h @@ -30,7 +30,7 @@ #define SMSC_NAPI_WEIGHT 16 /* implements a PHY loopback test at initialisation time, to ensure a packet - * can be succesfully looped back */ + * can be successfully looped back */ #define USE_PHY_WORK_AROUND #define DPRINTK(nlevel, klevel, fmt, args...) \ diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 90e663f4515..40b51e6bc77 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -409,7 +409,7 @@ spider_net_free_rx_chain_contents(struct spider_net_card *card) * @card: card structure * @descr: descriptor to re-init * - * Return 0 on succes, <0 on failure. + * Return 0 on success, <0 on failure. * * Allocates a new rx skb, iommu-maps it and attaches it to the * descriptor. Mark the descriptor as activated, ready-to-use. diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c index b624bb5bae0..52586ee6895 100644 --- a/drivers/net/stmmac/gmac.c +++ b/drivers/net/stmmac/gmac.c @@ -112,7 +112,7 @@ static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode, " (threshold = %d)\n", txmode); csr6 &= ~DMA_CONTROL_TSF; csr6 &= DMA_CONTROL_TC_TX_MASK; - /* Set the transmit threashold */ + /* Set the transmit threshold */ if (txmode <= 32) csr6 |= DMA_CONTROL_TTC_32; else if (txmode <= 64) diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h index 684a363120a..2e82d6c9a14 100644 --- a/drivers/net/stmmac/gmac.h +++ b/drivers/net/stmmac/gmac.h @@ -154,14 +154,14 @@ enum rx_tx_priority_ratio { #define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */ #define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ #define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ -/* Theshold for Activating the FC */ +/* Threshold for Activating the FC */ enum rfa { act_full_minus_1 = 0x00800000, act_full_minus_2 = 0x00800200, act_full_minus_3 = 0x00800400, act_full_minus_4 = 0x00800600, }; -/* Theshold for Deactivating the FC */ +/* Threshold for Deactivating the FC */ enum rfd { deac_full_minus_1 = 0x00400000, deac_full_minus_2 = 0x00400800, diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index ebda61bc4c2..78e12b5e3ac 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -426,7 +426,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev) smctr_malloc(dev, 1L); /* Allocate Non-MAC receive data buffers. - * To guarantee a minimum of 256 contigous memory to + * To guarantee a minimum of 256 contiguous memory to * UM_Receive_Packet's lookahead pointer, before a page * change or ring end is encountered, place each rx buffer on * a 256 byte boundary. diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 4469f2451a6..5e9adbaf674 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3798,7 +3798,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma prop = of_get_property(np, "tx-clock", NULL); if (!prop) { printk(KERN_ERR - "ucc_geth: mising tx-clock-name property\n"); + "ucc_geth: missing tx-clock-name property\n"); return -EINVAL; } if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) { diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index 03a6ca016d5..a007e2acf65 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -80,16 +80,16 @@ struct ucc_geth { frames) received that were between 128 (Including FCS length==4) and 255 octets */ u32 txok; /* Total number of octets residing in frames - that where involved in succesfull + that where involved in successfull transmission */ u16 txcf; /* Total number of PAUSE control frames transmitted by this MAC */ u8 res4[0x2]; u32 tmca; /* Total number of frames that were transmitted - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ u32 tbca; /* Total number of frames transmitted - succesfully that had destination address + successfully that had destination address field equal to the broadcast address */ u32 rxfok; /* Total number of frames received OK */ u32 rxbok; /* Total number of octets received OK */ @@ -98,9 +98,9 @@ struct ucc_geth { HW because it includes octets in frames that never even reach the UCC */ u32 rmca; /* Total number of frames that were received - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ - u32 rbca; /* Total number of frames received succesfully + u32 rbca; /* Total number of frames received successfully that had destination address equal to the broadcast address */ u32 scar; /* Statistics carry register */ @@ -759,15 +759,15 @@ struct ucc_geth_hardware_statistics { frames) received that were between 128 (Including FCS length==4) and 255 octets */ u32 txok; /* Total number of octets residing in frames - that where involved in succesfull + that where involved in successfull transmission */ u16 txcf; /* Total number of PAUSE control frames transmitted by this MAC */ u32 tmca; /* Total number of frames that were transmitted - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ u32 tbca; /* Total number of frames transmitted - succesfully that had destination address + successfully that had destination address field equal to the broadcast address */ u32 rxfok; /* Total number of frames received OK */ u32 rxbok; /* Total number of octets received OK */ @@ -776,9 +776,9 @@ struct ucc_geth_hardware_statistics { HW because it includes octets in frames that never even reach the UCC */ u32 rmca; /* Total number of frames that were received - succesfully with the group address bit set + successfully with the group address bit set that are not broadcast frames */ - u32 rbca; /* Total number of frames received succesfully + u32 rbca; /* Total number of frames received successfully that had destination address equal to the broadcast address */ } __attribute__ ((packed)); diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index c6c922247d0..0c3c738d741 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -748,7 +748,7 @@ static int smsc95xx_phy_initialize(struct usbnet *dev) mii_nway_restart(&dev->mii); if (netif_msg_ifup(dev)) - devdbg(dev, "phy initialised succesfully"); + devdbg(dev, "phy initialised successfully"); return 0; } diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 7ea71b33d2e..ee784e091f6 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -927,7 +927,7 @@ static int __devinit lmc_init_one(struct pci_dev *pdev, sc->lmc_media = &lmc_t1_media; break; default: - printk(KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name); + printk(KERN_WARNING "%s: LMC UNKNOWN CARD!\n", dev->name); break; } diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 07c32e68909..99d27473ba3 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -1114,7 +1114,7 @@ error: * device. See the file header for the format. Run all checks on the * buffer header, then run over each payload's descriptors, verify * their consistency and act on each payload's contents. If - * everything is succesful, update the device's statistics. + * everything is successful, update the device's statistics. * * Note: You need to set the skb to contain only the length of the * received buffer; for that, use skb_trim(skb, RECEIVED_SIZE). diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 1a039f2bd73..6f04cc758dc 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -117,7 +117,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, /* * This code is used to optimize rf gain on different environments - * (temprature mostly) based on feedback from a power detector. + * (temperature mostly) based on feedback from a power detector. * * It's only used on RF5111 and RF5112, later RF chips seem to have * auto adjustment on hw -notice they have a much smaller BANK 7 and @@ -2675,7 +2675,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, /* Fill curves in reverse order * from lower power (max gain) * to higher power. Use curve -> idx - * backmaping we did on eeprom init */ + * backmapping we did on eeprom init */ u8 idx = pdg_curve_to_idx[pdg]; /* Grab the needed curves by index */ @@ -2777,7 +2777,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, /* Now we have a set of curves for this * channel on tmpL (x range is table_max - table_min * and y values are tmpL[pdg][]) sorted in the same - * order as EEPROM (because we've used the backmaping). + * order as EEPROM (because we've used the backmapping). * So for RF5112 it's from higher power to lower power * and for RF2413 it's from lower power to higher power. * For RF5111 we only have one curve. */ diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 1895d63aad0..0a35ee62a02 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -969,7 +969,7 @@ static bool ath_rc_update_per(struct ath_softc *sc, * Since this probe succeeded, we allow the next * probe twice as soon. This allows the maxRate * to move up faster if the probes are - * succesful. + * successful. */ ath_rc_priv->probe_time = now_msec - rate_table->probe_interval / 2; diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index a741d37fd96..e1b33002320 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -551,7 +551,7 @@ static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord, /* get number of entries */ field_count = *(((u16 *) & field_info) + 1); - /* abort if no enought memory */ + /* abort if no enough memory */ total_length = field_len * field_count; if (total_length > *len) { *len = total_length; @@ -3044,7 +3044,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv) IPW_MAX_BDS)) { /* TODO: Support merging buffers if more than * IPW_MAX_BDS are used */ - IPW_DEBUG_INFO("%s: Maximum BD theshold exceeded. " + IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. " "Increase fragmentation level.\n", priv->net_dev->name); } @@ -6823,7 +6823,7 @@ static int ipw2100_wx_get_range(struct net_device *dev, range->max_qual.updated = 7; /* Updated all three */ range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */ - /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ + /* TODO: Find real 'good' to 'bad' threshold value for RSSI */ range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM; range->avg_qual.noise = 0; range->avg_qual.updated = 7; /* Updated all three */ diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 9b0f2c0646e..b2aa960b834 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -787,7 +787,7 @@ static int ipw_get_ordinal(struct ipw_priv *priv, u32 ord, void *val, u32 * len) /* get number of entries */ field_count = *(((u16 *) & field_info) + 1); - /* abort if not enought memory */ + /* abort if not enough memory */ total_len = field_len * field_count; if (total_len > *len) { *len = total_len; @@ -7751,7 +7751,7 @@ static void ipw_rebuild_decrypted_skb(struct ipw_priv *priv, case SEC_LEVEL_0: break; default: - printk(KERN_ERR "Unknow security level %d\n", + printk(KERN_ERR "Unknown security level %d\n", priv->ieee->sec.level); break; } @@ -8917,7 +8917,7 @@ static int ipw_wx_get_range(struct net_device *dev, range->max_qual.updated = 7; /* Updated all three */ range->avg_qual.qual = 70; - /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ + /* TODO: Find real 'good' to 'bad' threshold value for RSSI */ range->avg_qual.level = 0; /* FIXME to real average level */ range->avg_qual.noise = 0; range->avg_qual.updated = 7; /* Updated all three */ @@ -10290,7 +10290,7 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct libipw_txb *txb, case SEC_LEVEL_0: break; default: - printk(KERN_ERR "Unknow security level %d\n", + printk(KERN_ERR "Unknown security level %d\n", priv->ieee->sec.level); break; } diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index be5b809ec97..20b8a8a2064 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -199,7 +199,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) ieee->host_decrypt = 1; ieee->host_mc_decrypt = 1; - /* Host fragementation in Open mode. Default is enabled. + /* Host fragmentation in Open mode. Default is enabled. * Note: host fragmentation is always enabled if host encryption * is enabled. For cards can do hardware encryption, they must do * hardware fragmentation as well. So we don't need a variable diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c index c430418248b..d13c8853ee8 100644 --- a/drivers/net/wireless/iwmc3200wifi/hal.c +++ b/drivers/net/wireless/iwmc3200wifi/hal.c @@ -411,7 +411,7 @@ static void iwm_build_lmac_hdr(struct iwm_priv *iwm, struct iwm_lmac_hdr *hdr, /* * iwm_hal_send_host_cmd(): sends commands to the UMAC or the LMAC. * Sending command to the LMAC is equivalent to sending a - * regular UMAC command with the LMAC passtrough or the LMAC + * regular UMAC command with the LMAC passthrough or the LMAC * wrapper UMAC command IDs. */ int iwm_hal_send_host_cmd(struct iwm_priv *iwm, diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c index 771a301003c..8ddb51a2a97 100644 --- a/drivers/net/wireless/iwmc3200wifi/rx.c +++ b/drivers/net/wireless/iwmc3200wifi/rx.c @@ -1448,7 +1448,7 @@ static void iwm_rx_process_packet(struct iwm_priv *iwm, kfree_skb(packet->skb); break; default: - IWM_ERR(iwm, "Unknow ticket action: %d\n", + IWM_ERR(iwm, "Unknown ticket action: %d\n", le16_to_cpu(ticket_node->ticket->action)); kfree_skb(packet->skb); } diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 485a8d40652..afe6abecc04 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -934,7 +934,7 @@ static int if_sdio_probe(struct sdio_func *func, } if (i == ARRAY_SIZE(if_sdio_models)) { - lbs_pr_err("unkown card model 0x%x\n", card->model); + lbs_pr_err("unknown card model 0x%x\n", card->model); ret = -ENODEV; goto free; } diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index bc08464d832..f7f5c793514 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -1897,7 +1897,7 @@ prism54_get_mac(struct net_device *ndev, struct iw_request_info *info, return 0; } -/* Setting policy also clears the MAC acl, even if we don't change the defaut +/* Setting policy also clears the MAC acl, even if we don't change the default * policy */ @@ -2323,7 +2323,7 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, case DOT11_OID_BEACON: send_formatted_event(priv, - "Received a beacon from an unkown AP", + "Received a beacon from an unknown AP", mlme, 0); break; diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index ccd644104ad..aced0577569 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -35,7 +35,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 100 diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h index 54d37957883..3db9041838a 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -46,7 +46,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 121 diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index b01edca4258..d3000827883 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -46,7 +46,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 120 diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 93eb699165c..77b5116f549 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -37,7 +37,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 120 diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 81fe0be51c4..e194332dac5 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -37,7 +37,7 @@ /* * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. + * Default offset is required for RSSI <-> dBm conversion. */ #define DEFAULT_RSSI_OFFSET 120 diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 431a20ec6db..b3b0b5b685c 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -4011,7 +4011,7 @@ wavelan_interrupt(int irq, #endif /* Prevent reentrancy. We need to do that because we may have - * multiple interrupt handler running concurently. + * multiple interrupt handler running concurrently. * It is safe because interrupts are disabled before aquiring * the spinlock. */ spin_lock(&lp->spinlock); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 6d666359a42..2b7f9659437 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -312,7 +312,7 @@ static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, * zd_mac_tx_failed - callback for failed frames * @dev: the mac80211 wireless device * - * This function is called if a frame couldn't be succesfully be + * This function is called if a frame couldn't be successfully be * transferred. The first frame from the tx queue, will be selected and * reported as error to the upper layers. */ diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index a6b4a5a53d4..f511e70d454 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -650,7 +650,7 @@ ccio_clear_io_tlb(struct ioc *ioc, dma_addr_t iovp, size_t byte_cnt) * Mark the I/O Pdir entries invalid and blow away the corresponding I/O * TLB entries. * - * FIXME: at some threshhold it might be "cheaper" to just blow + * FIXME: at some threshold it might be "cheaper" to just blow * away the entire I/O TLB instead of individual entries. * * FIXME: Uturn has 256 TLB entries. We don't need to purge every diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index d93108d148f..36db20a8f89 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -6533,7 +6533,7 @@ static struct ibm_struct volume_driver_data = { * The speeds are stored on handles * (FANA:FAN9), (FANC:FANB), (FANE:FAND). * - * There are three default speed sets, acessible as handles: + * There are three default speed sets, accessible as handles: * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H * * ACPI DSDT switches which set is in use depending on various diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c index 87b4f49a525..a5135ebe5f0 100644 --- a/drivers/pnp/pnpbios/rsparser.c +++ b/drivers/pnp/pnpbios/rsparser.c @@ -191,7 +191,7 @@ static unsigned char *pnpbios_parse_allocated_resource_data(struct pnp_dev *dev, return (unsigned char *)p; break; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); @@ -405,7 +405,7 @@ pnpbios_parse_resource_option_data(unsigned char *p, unsigned char *end, case SMALL_TAG_END: return p + 2; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); @@ -475,7 +475,7 @@ static unsigned char *pnpbios_parse_compatible_ids(unsigned char *p, return (unsigned char *)p; break; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); @@ -744,7 +744,7 @@ static unsigned char *pnpbios_encode_allocated_resource_data(struct pnp_dev return (unsigned char *)p; break; - default: /* an unkown tag */ + default: /* an unknown tag */ len_err: dev_err(&dev->dev, "unknown tag %#x length %d\n", tag, len); diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c index 88cb7408861..3cbaf1811bd 100644 --- a/drivers/ps3/ps3-sys-manager.c +++ b/drivers/ps3/ps3-sys-manager.c @@ -46,7 +46,7 @@ /** * struct ps3_sys_manager_header - System manager message header. * @version: Header version, currently 1. - * @size: Header size in bytes, curently 16. + * @size: Header size in bytes, currently 16. * @payload_size: Message payload size in bytes. * @service_id: Message type, one of enum ps3_sys_manager_service_id. * @request_tag: Unique number to identify reply. diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c index ad164056feb..434e92fdb96 100644 --- a/drivers/rtc/rtc-v3020.c +++ b/drivers/rtc/rtc-v3020.c @@ -335,7 +335,7 @@ static int rtc_probe(struct platform_device *pdev) goto err_io; } - /* Make sure frequency measurment mode, test modes, and lock + /* Make sure frequency measurement mode, test modes, and lock * are all disabled */ v3020_set_reg(chip, V3020_STATUS_0, 0x0); diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c index 097d3846a82..f54b1eec6dd 100644 --- a/drivers/s390/char/fs3270.c +++ b/drivers/s390/char/fs3270.c @@ -74,7 +74,7 @@ fs3270_do_io(struct raw3270_view *view, struct raw3270_request *rq) } rc = raw3270_start(view, rq); if (rc == 0) { - /* Started sucessfully. Now wait for completion. */ + /* Started successfully. Now wait for completion. */ wait_event(fp->wait, raw3270_request_final(rq)); } } while (rc == -EACCES); diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c index 8ab51608da5..c268a2e5b7c 100644 --- a/drivers/s390/cio/chp.c +++ b/drivers/s390/cio/chp.c @@ -65,7 +65,7 @@ static void set_chp_logically_online(struct chp_id chpid, int onoff) chpid_to_chp(chpid)->state = onoff; } -/* On succes return 0 if channel-path is varied offline, 1 if it is varied +/* On success return 0 if channel-path is varied offline, 1 if it is varied * online. Return -ENODEV if channel-path is not registered. */ int chp_get_status(struct chp_id chpid) { diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c index 30f51611130..2985eb43948 100644 --- a/drivers/s390/cio/cmf.c +++ b/drivers/s390/cio/cmf.c @@ -462,7 +462,7 @@ static struct cmb_area cmb_area = { * block of memory, which can not be moved as long as any channel * is active. Therefore, a maximum number of subchannels needs to * be defined somewhere. This is a module parameter, defaulting to - * a resonable value of 1024, or 32 kb of memory. + * a reasonable value of 1024, or 32 kb of memory. * Current kernels don't allow kmalloc with more than 128kb, so the * maximum is 4096. */ diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c index 58e583b61e6..aa2b60a868b 100644 --- a/drivers/sbus/char/envctrl.c +++ b/drivers/sbus/char/envctrl.c @@ -92,11 +92,11 @@ #define ENVCTRL_CPUTEMP_MON 1 /* cpu temperature monitor */ #define ENVCTRL_CPUVOLTAGE_MON 2 /* voltage monitor */ #define ENVCTRL_FANSTAT_MON 3 /* fan status monitor */ -#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperarture */ +#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperature */ /* monitor */ #define ENVCTRL_VOLTAGESTAT_MON 5 /* voltage status monitor */ #define ENVCTRL_MTHRBDTEMP_MON 6 /* motherboard temperature */ -#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperarture */ +#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperature */ #define ENVCTRL_GLOBALADDR_MON 8 /* global address */ /* Child device type. diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index f5a9addb705..07ce9bfcdf0 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -1491,7 +1491,7 @@ NCR_700_intr(int irq, void *dev_id) unsigned long flags; int handled = 0; - /* Use the host lock to serialise acess to the 53c700 + /* Use the host lock to serialise access to the 53c700 * hardware. Note: In future, we may need to take the queue * lock to enter the done routines. When that happens, we * need to ensure that for this driver, the host lock and the diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index cdbdec9f4fb..83986ed8655 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -526,10 +526,10 @@ struct aac_driver_ident /* * The adapter interface specs all queues to be located in the same - * physically contigous block. The host structure that defines the + * physically contiguous block. The host structure that defines the * commuication queues will assume they are each a separate physically - * contigous memory region that will support them all being one big - * contigous block. + * contiguous memory region that will support them all being one big + * contiguous block. * There is a command and response queue for each level and direction of * commuication. These regions are accessed by both the host and adapter. */ diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index d598eba630d..666d5151d62 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -226,7 +226,7 @@ static int aac_comm_init(struct aac_dev * dev) spin_lock_init(&dev->fib_lock); /* - * Allocate the physically contigous space for the commuication + * Allocate the physically contiguous space for the commuication * queue headers. */ diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq index 3b66b5ae3d9..2fb78e35a9e 100644 --- a/drivers/scsi/aic7xxx/aic79xx.seq +++ b/drivers/scsi/aic7xxx/aic79xx.seq @@ -217,7 +217,7 @@ BEGIN_CRITICAL; scbdma_tohost_done: test CCSCBCTL, CCARREN jz fill_qoutfifo_dmadone; /* - * An SCB has been succesfully uploaded to the host. + * An SCB has been successfully uploaded to the host. * If the SCB was uploaded for some reason other than * bad SCSI status (currently only for underruns), we * queue the SCB for normal completion. Otherwise, we diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 63b521d615f..4d419c155ce 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -2487,7 +2487,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) /* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy - * LED does. SELINGO is only cleared by a sucessfull + * LED does. SELINGO is only cleared by a successfull * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus). diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c index 8dfb59d5899..45aa728a76b 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_core.c +++ b/drivers/scsi/aic7xxx/aic7xxx_core.c @@ -1733,7 +1733,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat) /* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy - * LED does. SELINGO is only cleared by a sucessfull + * LED does. SELINGO is only cleared by a successfull * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus). diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h index a000bc4e2d4..bf320412ee2 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h @@ -61,7 +61,7 @@ enum bfa_pport_speed { * Port operational type (in sync with SNIA port type). */ enum bfa_pport_type { - BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unkown */ + BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unknown */ BFA_PPORT_TYPE_TRUNKED = 2, /* Trunked mode */ BFA_PPORT_TYPE_NPORT = 5, /* P2P with switched fabric */ BFA_PPORT_TYPE_NLPORT = 6, /* public loop */ diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h index 31881d21851..ade763dbc8c 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h @@ -25,7 +25,7 @@ * Temperature sensor status values */ enum bfa_tsensor_status { - BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unkown status */ + BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unknown status */ BFA_TSENSOR_STATUS_FAULTY = 2, /* sensor is faulty */ BFA_TSENSOR_STATUS_BELOW_MIN = 3, /* temperature below mininum */ BFA_TSENSOR_STATUS_NOMINAL = 4, /* normal temperature */ diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index a0e7e711ff9..5be67a6fca9 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -834,7 +834,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba) atomic_read(&hba->resetting) == 0, 60 * HZ); if (atomic_read(&hba->resetting)) { - /* IOP is in unkown state, abort reset */ + /* IOP is in unknown state, abort reset */ printk(KERN_ERR "scsi%d: reset failed\n", hba->host->host_no); return -1; } diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index bd2f7719744..6486ae4591b 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -56,7 +56,7 @@ * at the same time. * * When discovery succeeds or fails a callback is made to the lport as - * notification. Currently, succesful discovery causes the lport to take no + * notification. Currently, successful discovery causes the lport to take no * action. A failure will cause the lport to reset. There is likely a circular * locking problem with this implementation. */ diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 2e0746d7030..ca25ee5190b 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -1004,7 +1004,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) * iscsi_tcp_task_xmit - xmit normal PDU task * @task: iscsi command task * - * We're expected to return 0 when everything was transmitted succesfully, + * We're expected to return 0 when everything was transmitted successfully, * -EAGAIN if there's still data in the queue, or != 0 for any other kind * of error. */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index e1a30a16a9f..9bd19aa1424 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -654,7 +654,7 @@ lpfc_selective_reset(struct lpfc_hba *phba) * Notes: * Assumes any error from lpfc_selective_reset() will be negative. * If lpfc_selective_reset() returns zero then the length of the buffer - * is returned which indicates succcess + * is returned which indicates success * * Returns: * -EINVAL if the buffer does not contain the string "selective" @@ -3147,7 +3147,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, * sysfs_ctlreg_read - Read method for reading from ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. - * @buf: if succesful contains the data from the adapter IOREG space. + * @buf: if successful contains the data from the adapter IOREG space. * @off: offset into buffer to beginning of data. * @count: bytes to transfer. * diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 45337cd23fe..a14ab4580d4 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -802,7 +802,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* FLOGI completes successfully */ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS, - "0101 FLOGI completes sucessfully " + "0101 FLOGI completes successfully " "Data: x%x x%x x%x x%x\n", irsp->un.ulpWord[4], sp->cmn.e_d_tov, sp->cmn.w2.r_a_tov, sp->cmn.edtovResolution); @@ -4133,7 +4133,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, /* Indicate we are walking fc_rscn_id_list on this vport */ vport->fc_rscn_flush = 1; spin_unlock_irq(shost->host_lock); - /* Get the array count after sucessfully have the token */ + /* Get the array count after successfully have the token */ rscn_cnt = vport->fc_rscn_id_cnt; /* If we are already processing an RSCN, save the received * RSCN payload buffer, cmdiocb->context2 to process later. diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 562d8cee874..82f8ab5c72c 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -645,7 +645,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba) * down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ static int @@ -700,7 +700,7 @@ lpfc_hba_down_post_s3(struct lpfc_hba *phba) * down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ static int @@ -755,7 +755,7 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba) * uninitialization after the HBA is reset when bring down the SLI Layer. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ int @@ -1254,7 +1254,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba) * routine from the API jump table function pointer from the lpfc_hba struct. * * Return codes - * 0 - sucess. + * 0 - success. * Any other value - error. **/ void @@ -3124,7 +3124,7 @@ static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode) * PCI devices. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3220,7 +3220,7 @@ lpfc_reset_hba(struct lpfc_hba *phba) * support the SLI-3 HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3321,7 +3321,7 @@ lpfc_sli_driver_resource_unset(struct lpfc_hba *phba) * support the SLI-4 HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3642,7 +3642,7 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) * device specific resource setup to support the HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3688,7 +3688,7 @@ lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba) * device specific resource setup to support the HBA device it attached to. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3753,7 +3753,7 @@ lpfc_free_iocb_list(struct lpfc_hba *phba) * list and set up the IOCB tag array accordingly. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3872,7 +3872,7 @@ lpfc_free_active_sgl(struct lpfc_hba *phba) * list and set up the sgl xritag tag array accordingly. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -3986,7 +3986,7 @@ out_free_mem: * enabled and the driver is reinitializing the device. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4146,7 +4146,7 @@ lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba) * PCI device data structure is set. * * Return codes - * pointer to @phba - sucessful + * pointer to @phba - successful * NULL - error **/ static struct lpfc_hba * @@ -4202,7 +4202,7 @@ lpfc_hba_free(struct lpfc_hba *phba) * host with it. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -4365,7 +4365,7 @@ lpfc_post_init_setup(struct lpfc_hba *phba) * with SLI-3 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -4662,7 +4662,7 @@ lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf) * this routine. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - could not allocated memory. **/ static int @@ -4761,7 +4761,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba) * allocation for the port. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4861,7 +4861,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) * HBA consistent with the SLI-4 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -4910,7 +4910,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba) * we just use some constant number as place holder. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5218,7 +5218,7 @@ out_error: * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5286,7 +5286,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba) * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5552,7 +5552,7 @@ out_error: * operation. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5599,7 +5599,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba) * Later, this can be used for all the slow-path events. * * Return codes - * 0 - sucessful + * 0 - successful * -ENOMEM - No availble memory **/ static int @@ -5760,7 +5760,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba) * all resources assigned to the PCI function which originates this request. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully. **/ @@ -5923,7 +5923,7 @@ lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi) * with SLI-4 interface spec. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6052,7 +6052,7 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba) * will be left with MSI-X enabled and leaks its vectors. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6184,7 +6184,7 @@ lpfc_sli_disable_msix(struct lpfc_hba *phba) * is done in this function. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error */ static int @@ -6243,7 +6243,7 @@ lpfc_sli_disable_msi(struct lpfc_hba *phba) * MSI-X -> MSI -> IRQ. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static uint32_t @@ -6333,7 +6333,7 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba) * enabled and leaks its vectors. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6443,7 +6443,7 @@ lpfc_sli4_disable_msix(struct lpfc_hba *phba) * which is done in this function. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static int @@ -6508,7 +6508,7 @@ lpfc_sli4_disable_msi(struct lpfc_hba *phba) * MSI-X -> MSI -> IRQ. * * Return codes - * 0 - sucessful + * 0 - successful * other values - error **/ static uint32_t diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 43cbe336f1f..42d4f3dae1d 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1794,7 +1794,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) */ if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) == MBX_SHUTDOWN) { - /* Unknow mailbox command compl */ + /* Unknown mailbox command compl */ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "(%d):0323 Unknown Mailbox command " "x%x (x%x) Cmpl\n", @@ -4163,7 +4163,7 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba, * addition, this routine gets the port vpd data. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - could not allocated memory. **/ static int @@ -11091,7 +11091,7 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba) * sequential. * * Return codes - * 0 - sucessful + * 0 - successful * EIO - The mailbox failed to complete successfully. * When this error occurs, the driver is not guaranteed * to have any rpi regions posted to the device and @@ -11129,7 +11129,7 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba) * maps up to 64 rpi context regions. * * Return codes - * 0 - sucessful + * 0 - successful * ENOMEM - No available memory * EIO - The mailbox failed to complete successfully. **/ @@ -11191,7 +11191,7 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) * PAGE_SIZE modulo 64 rpi context headers. * * Returns - * A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful + * A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful * LPFC_RPI_ALLOC_ERROR if no rpis are available. **/ int diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index 512c2cc1a33..d310f49d077 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -381,7 +381,7 @@ typedef struct { u8 battery_status; /* * BIT 0: battery module missing * BIT 1: VBAD - * BIT 2: temprature high + * BIT 2: temperature high * BIT 3: battery pack missing * BIT 4,5: * 00 - charge complete diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h index b25b74764ec..ce2487a888e 100644 --- a/drivers/scsi/megaraid/mbox_defs.h +++ b/drivers/scsi/megaraid/mbox_defs.h @@ -497,7 +497,7 @@ typedef struct { * @inserted_drive : channel:Id of inserted drive * @battery_status : bit 0: battery module missing * bit 1: VBAD - * bit 2: temprature high + * bit 2: temperature high * bit 3: battery pack missing * bit 4,5: * 00 - charge complete diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 234f0b7eb21..f9ae8037a71 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -2704,7 +2704,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp) } else { con_log(CL_ANN, (KERN_NOTICE - "megaraid mbox: reset sequence completed sucessfully\n")); + "megaraid mbox: reset sequence completed successfully\n")); } diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 86ab32d7ab1..756e509d495 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2894,7 +2894,7 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data) #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** - * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request + * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request * @ioc: per adapter object * @scmd: pointer to scsi command object * @mpi_reply: reply mf payload returned from firmware diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index e3c482aa87b..a2d56982830 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -6495,7 +6495,7 @@ static void ncr_int_ma (struct ncb *np) ** we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids ** bloat for such a should_not_happen situation). ** In all other situation, we reset the BUS. - ** Are these assumptions reasonnable ? (Wait and see ...) + ** Are these assumptions reasonable ? (Wait and see ...) */ unexpected_phase: dsp -= 8; diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index f7c70e2a822..d3d39f86fcf 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -3342,7 +3342,7 @@ static int pmcraid_chr_fasync(int fd, struct file *filep, int mode) * @direction : data transfer direction * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static int pmcraid_build_passthrough_ioadls( struct pmcraid_cmd *cmd, @@ -3401,7 +3401,7 @@ static int pmcraid_build_passthrough_ioadls( * @direction: data transfer direction * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static void pmcraid_release_passthrough_ioadls( struct pmcraid_cmd *cmd, @@ -3429,7 +3429,7 @@ static void pmcraid_release_passthrough_ioadls( * @arg: pointer to pmcraid_passthrough_buffer user buffer * * Return value - * 0 on sucess, non-zero error code on failure + * 0 on success, non-zero error code on failure */ static long pmcraid_ioctl_passthrough( struct pmcraid_instance *pinstance, diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index 3441b3f9082..2752b56cad5 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -771,11 +771,11 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = { {0x01180600, IOASC_LOG_LEVEL_MUST, "Recovered Error, soft media error, sector reassignment suggested"}, {0x015D0000, IOASC_LOG_LEVEL_MUST, - "Recovered Error, failure prediction thresold exceeded"}, + "Recovered Error, failure prediction threshold exceeded"}, {0x015D9200, IOASC_LOG_LEVEL_MUST, - "Recovered Error, soft Cache Card Battery error thresold"}, + "Recovered Error, soft Cache Card Battery error threshold"}, {0x015D9200, IOASC_LOG_LEVEL_MUST, - "Recovered Error, soft Cache Card Battery error thresold"}, + "Recovered Error, soft Cache Card Battery error threshold"}, {0x02048000, IOASC_LOG_LEVEL_MUST, "Not Ready, IOA Reset Required"}, {0x02408500, IOASC_LOG_LEVEL_MUST, diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index 723fdecd91b..0fd6ae6911a 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -613,7 +613,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_send_transport_msg); * @data_buf: pointer to vendor unique data buffer * * Returns: - * 0 on succesful return + * 0 on successful return * otherwise, failing error code * * Notes: diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index fd47cb1bee1..f27e52d963d 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -666,7 +666,7 @@ EXPORT_SYMBOL(sas_phy_add); * * Note: * This function must only be called on a PHY that has not - * sucessfully been added using sas_phy_add(). + * successfully been added using sas_phy_add(). */ void sas_phy_free(struct sas_phy *phy) { @@ -896,7 +896,7 @@ EXPORT_SYMBOL(sas_port_add); * * Note: * This function must only be called on a PORT that has not - * sucessfully been added using sas_port_add(). + * successfully been added using sas_port_add(). */ void sas_port_free(struct sas_port *port) { @@ -1476,7 +1476,7 @@ EXPORT_SYMBOL(sas_rphy_add); * * Note: * This function must only be called on a remote - * PHY that has not sucessfully been added using + * PHY that has not successfully been added using * sas_rphy_add() (or has been sas_rphy_remove()'d) */ void sas_rphy_free(struct sas_rphy *rphy) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 45374d66d26..2b38f6ad6e1 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev) * * This routine is similar to sym_set_workarounds(), except * that, at this point, we already know that the device was - * succesfully intialized at least once before, and so most + * successfully intialized at least once before, and so most * of the steps taken there are un-needed here. */ static void sym2_reset_workarounds(struct pci_dev *pdev) diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 297deb817a5..a7bc8b7b09a 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -2692,7 +2692,7 @@ static void sym_int_ma (struct sym_hcb *np) * we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids * bloat for such a should_not_happen situation). * In all other situation, we reset the BUS. - * Are these assumptions reasonnable ? (Wait and see ...) + * Are these assumptions reasonable ? (Wait and see ...) */ unexpected_phase: dsp -= 8; diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 053e63c8682..5a80cbac3f9 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -54,7 +54,7 @@ * * SYM_OPT_LIMIT_COMMAND_REORDERING * When this option is set, the driver tries to limit tagged - * command reordering to some reasonnable value. + * command reordering to some reasonable value. * (set for Linux) */ #if 0 diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index d71dfe39894..36ede02ceac 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -361,9 +361,9 @@ static const struct pnp_device_id pnp_dev_table[] = { { "LTS0001", 0 }, /* Rockwell's (PORALiNK) 33600 INT PNP */ { "WCI0003", 0 }, - /* Unkown PnP modems */ + /* Unknown PnP modems */ { "PNPCXXX", UNKNOWN_DEV }, - /* More unkown PnP modems */ + /* More unknown PnP modems */ { "PNPDXXX", UNKNOWN_DEV }, { "", 0 } }; diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h index 570b0d925e8..f6e77f12acd 100644 --- a/drivers/serial/pmac_zilog.h +++ b/drivers/serial/pmac_zilog.h @@ -73,7 +73,7 @@ static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap) } /* - * Register acessors. Note that we don't need to enforce a recovery + * Register accessors. Note that we don't need to enforce a recovery * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip, * though if we try to use this driver on older machines, we might have * to add it back diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index 0c08f286a2e..46de564aaea 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -313,7 +313,7 @@ static void qe_uart_stop_tx(struct uart_port *port) * This function will attempt to stuff of all the characters from the * kernel's transmit buffer into TX BDs. * - * A return value of non-zero indicates that it sucessfully stuffed all + * A return value of non-zero indicates that it successfully stuffed all * characters from the kernel buffer. * * A return value of zero indicates that there are still characters in the diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c index 40de151f278..e89304c7256 100644 --- a/drivers/telephony/ixj.c +++ b/drivers/telephony/ixj.c @@ -4190,7 +4190,7 @@ static void ixj_aec_start(IXJ *j, int level) ixj_WriteDSPCommand(0x1224, j); ixj_WriteDSPCommand(0xE014, j); - ixj_WriteDSPCommand(0x0003, j); /* Lock threashold at 3dB */ + ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */ ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */ @@ -4235,7 +4235,7 @@ static void ixj_aec_start(IXJ *j, int level) ixj_WriteDSPCommand(0x1224, j); ixj_WriteDSPCommand(0xE014, j); - ixj_WriteDSPCommand(0x0003, j); /* Lock threashold at 3dB */ + ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */ ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */ diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index d171b563e94..bba4d3eabe0 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1958,7 +1958,7 @@ static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr) goto bad1; /* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to - * the first MEMACESS cmv. Ignore it... + * the first MEMACCESS cmv. Ignore it... */ if (cmv->bFunction != dsc->function) { if (UEA_CHIP_VERSION(sc) == ADI930 diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 2473cf0c6b1..b4bd2411c66 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -1,5 +1,5 @@ /** - * drivers/usb/class/usbtmc.c - USB Test & Measurment class driver + * drivers/usb/class/usbtmc.c - USB Test & Measurement class driver * * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany * Copyright (C) 2008 Novell, Inc. diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index da718e84d58..e80f1af438c 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1890,7 +1890,7 @@ static void cancel_async_set_config(struct usb_device *udev) * routine gets around the normal restrictions by using a work thread to * submit the change-config request. * - * Returns 0 if the request was succesfully queued, error code otherwise. + * Returns 0 if the request was successfully queued, error code otherwise. * The caller has no way to know whether the queued request will eventually * succeed. */ diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index 7953948bfe4..4e3657808b0 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -432,7 +432,7 @@ static void acm_disable(struct usb_function *f) * @length: size of data * Context: irqs blocked, acm->lock held, acm_notify_req non-null * - * Returns zero on sucess or a negative errno. + * Returns zero on success or a negative errno. * * See section 6.3.5 of the CDC 1.1 specification for information * about the only notification we issue: SerialState change. diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 1937d8c7b43..adda1208a1e 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1524,7 +1524,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget) * pxa_udc_wakeup - Force udc device out of suspend * @_gadget: usb gadget * - * Returns 0 if succesfull, error code otherwise + * Returns 0 if successfull, error code otherwise */ static int pxa_udc_wakeup(struct usb_gadget *_gadget) { diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index 62a226b6167..00a29855d0c 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -627,7 +627,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd) /* - * Process normal completions(error or sucess) and clean the schedule. + * Process normal completions(error or success) and clean the schedule. * * This is the main path for handing urbs back to drivers. The only other patth * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c index 9ec7fd5da48..9579cf4c38b 100644 --- a/drivers/usb/wusbcore/crypto.c +++ b/drivers/usb/wusbcore/crypto.c @@ -111,7 +111,7 @@ struct aes_ccm_b1 { * * CCM uses Ax blocks to generate a keystream with which the MIC and * the message's payload are encoded. A0 always encrypts/decrypts the - * MIC. Ax (x>0) are used for the sucesive payload blocks. + * MIC. Ax (x>0) are used for the successive payload blocks. * * The x is the counter, and is increased for each block. */ diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 613a5fc490d..489b47833e2 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -558,7 +558,7 @@ static void wa_seg_dto_cb(struct urb *urb) /* * Callback for the segment request * - * If succesful transition state (unless already transitioned or + * If successful transition state (unless already transitioned or * outbound transfer); otherwise, take a note of the error, mark this * segment done and try completion. * @@ -1364,7 +1364,7 @@ segment_aborted: /* * Callback for the IN data phase * - * If succesful transition state; otherwise, take a note of the + * If successful transition state; otherwise, take a note of the * error, mark this segment done and try completion. * * Note we don't access until we are sure that the transfer hasn't diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c index c7080d49731..0bb665a0c02 100644 --- a/drivers/uwb/i1480/dfu/usb.c +++ b/drivers/uwb/i1480/dfu/usb.c @@ -229,7 +229,7 @@ void i1480_usb_neep_cb(struct urb *urb) * will verify it. * * Set i1480->evt_result with the result of getting the event or its - * size (if succesful). + * size (if successful). * * Delivers the data directly to i1480->evt_buf */ diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c index 86a853b8411..7350ed6909f 100644 --- a/drivers/uwb/wlp/txrx.c +++ b/drivers/uwb/wlp/txrx.c @@ -282,7 +282,7 @@ EXPORT_SYMBOL_GPL(wlp_receive_frame); * and transmission will be done by the calling function. * @dst: On return this will contain the device address to which the * frame is destined. - * @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer, + * @returns: 0 on success no tx : WLP header successfully applied to skb buffer, * calling function can proceed with tx * 1 on success with tx : WLP will take over transmission of this * frame diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 913b4a47ae5..1ddeb4c3476 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -3276,7 +3276,7 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) txtformat = "24 bit interface"; break; default: - txtformat = "unkown format"; + txtformat = "unknown format"; } } else { switch (format & 7) { @@ -3299,7 +3299,7 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) txtformat = "262144 colours (FDPI-2 mode)"; break; default: - txtformat = "unkown format"; + txtformat = "unknown format"; } } PRINTKI("%s%s %s monitor detected: %s\n", diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c index 505c0823a10..2cf7ba52f67 100644 --- a/drivers/video/backlight/atmel-pwm-bl.c +++ b/drivers/video/backlight/atmel-pwm-bl.c @@ -158,7 +158,7 @@ static int atmel_pwm_bl_probe(struct platform_device *pdev) goto err_free_pwm; } - /* Turn display off by defatult. */ + /* Turn display off by default. */ retval = gpio_direction_output(pwmbl->gpio_on, 0 ^ pdata->on_active_low); if (retval) diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c index 50ec17dfc51..fa32b94a454 100644 --- a/drivers/video/backlight/tosa_lcd.c +++ b/drivers/video/backlight/tosa_lcd.c @@ -177,7 +177,7 @@ static int __devinit tosa_lcd_probe(struct spi_device *spi) if (!data) return -ENOMEM; - data->is_vga = true; /* defaut to VGA mode */ + data->is_vga = true; /* default to VGA mode */ /* * bits_per_word cannot be configured in platform data diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c index 857b3668b3b..6468a297e34 100644 --- a/drivers/video/console/sticore.c +++ b/drivers/video/console/sticore.c @@ -436,7 +436,7 @@ sti_init_glob_cfg(struct sti_struct *sti, (offs < PCI_BASE_ADDRESS_0 || offs > PCI_BASE_ADDRESS_5)) { printk (KERN_WARNING - "STI pci region maping for region %d (%02x) can't be mapped\n", + "STI pci region mapping for region %d (%02x) can't be mapped\n", i,sti->rm_entry[i]); continue; } diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index 1a83709f961..492e6e64b65 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -701,7 +701,7 @@ static int gbefb_set_par(struct fb_info *info) blocks of 512x128, 256x128 or 128x128 pixels, respectively for 8bit, 16bit and 32 bit modes (64 kB). They cover the screen with partial tiles on the right and/or bottom of the screen if needed. - For exemple in 640x480 8 bit mode the mapping is: + For example in 640x480 8 bit mode the mapping is: <-------- 640 -----> <---- 512 ----><128|384 offscreen> diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c index 6120f0c526f..876648e15e9 100644 --- a/drivers/video/stifb.c +++ b/drivers/video/stifb.c @@ -756,9 +756,9 @@ hyperResetPlanes(struct stifb_info *fb, int enable) if (fb->info.var.bits_per_pixel == 32) controlPlaneReg = 0x04000F00; else - controlPlaneReg = 0x00000F00; /* 0x00000800 should be enought, but lets clear all 4 bits */ + controlPlaneReg = 0x00000F00; /* 0x00000800 should be enough, but lets clear all 4 bits */ else - controlPlaneReg = 0x00000F00; /* 0x00000100 should be enought, but lets clear all 4 bits */ + controlPlaneReg = 0x00000F00; /* 0x00000100 should be enough, but lets clear all 4 bits */ switch (enable) { case ENABLE: diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c index ff43c888502..98054839004 100644 --- a/drivers/video/tdfxfb.c +++ b/drivers/video/tdfxfb.c @@ -52,7 +52,7 @@ * * 0.1.3 (released 1999-11-02) added Attila's panning support, code * reorg, hwcursor address page size alignment - * (for mmaping both frame buffer and regs), + * (for mmapping both frame buffer and regs), * and my changes to get rid of hardcoded * VGA i/o register locations (uses PCI * configuration info now) diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c index c5c32b6b6e6..67b36932212 100644 --- a/drivers/video/via/dvi.c +++ b/drivers/video/via/dvi.c @@ -467,7 +467,7 @@ static int dvi_get_panel_size_from_DDCv1(void) default: viaparinfo->tmds_setting_info->dvi_panel_size = VIA_RES_1024X768; - DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d !\ + DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d !\ set default panel size.\n", max_h); break; } @@ -534,7 +534,7 @@ static int dvi_get_panel_size_from_DDCv2(void) default: viaparinfo->tmds_setting_info->dvi_panel_size = VIA_RES_1024X768; - DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d!\ + DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d!\ set default panel size.\n", HSize); break; } diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c index 3df17dc8c3d..65ccd215d49 100644 --- a/drivers/video/vt8623fb.c +++ b/drivers/video/vt8623fb.c @@ -446,7 +446,7 @@ static int vt8623fb_set_par(struct fb_info *info) svga_wseq_mask(0x1E, 0xF0, 0xF0); // DI/DVP bus svga_wseq_mask(0x2A, 0x0F, 0x0F); // DI/DVP bus - svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read treshold + svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read threshold vga_wseq(NULL, 0x17, 0x1F); // FIFO depth vga_wseq(NULL, 0x18, 0x4E); svga_wseq_mask(0x1A, 0x08, 0x08); // enable MMIO ? diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c index 381026c0bd7..923cc68dba2 100644 --- a/drivers/watchdog/coh901327_wdt.c +++ b/drivers/watchdog/coh901327_wdt.c @@ -508,7 +508,7 @@ void coh901327_watchdog_reset(void) * deactivating the watchdog before it is shut down by it. * * NOTE: on future versions of the watchdog, this restriction is - * gone: the watchdog will be reloaded with a defaul value (1 min) + * gone: the watchdog will be reloaded with a default value (1 min) * instead of last value, and you can conveniently set the watchdog * timeout to 10ms (value = 1) without any problems. */ diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c index b6b3f59ab44..47d719717a3 100644 --- a/drivers/watchdog/machzwd.c +++ b/drivers/watchdog/machzwd.c @@ -21,7 +21,7 @@ * wd#1 - 2 seconds; * wd#2 - 7.2 ms; * After the expiration of wd#1, it can generate a NMI, SCI, SMI, or - * a system RESET and it starts wd#2 that unconditionaly will RESET + * a system RESET and it starts wd#2 that unconditionally will RESET * the system when the counter reaches zero. * * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index 3bde56bce63..5bfb1f2c531 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -542,7 +542,7 @@ static struct notifier_block wdrtas_notifier = { /** * wdrtas_get_tokens - reads in RTAS tokens * - * returns 0 on succes, <0 on failure + * returns 0 on success, <0 on failure * * wdrtas_get_tokens reads in the tokens for the RTAS calls used in * this watchdog driver. It tolerates, if "get-sensor-state" and @@ -598,7 +598,7 @@ static void wdrtas_unregister_devs(void) /** * wdrtas_register_devs - registers the misc dev handlers * - * returns 0 on succes, <0 on failure + * returns 0 on success, <0 on failure * * wdrtas_register_devs registers the watchdog and temperature watchdog * misc devs @@ -630,7 +630,7 @@ static int wdrtas_register_devs(void) /** * wdrtas_init - init function of the watchdog driver * - * returns 0 on succes, <0 on failure + * returns 0 on success, <0 on failure * * registers the file handlers and the reboot notifier */ |