diff options
Diffstat (limited to 'drivers')
49 files changed, 1596 insertions, 335 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index 00cf9553f74..a442c8f29fc 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -104,6 +104,8 @@ source "drivers/auxdisplay/Kconfig" source "drivers/uio/Kconfig" +source "drivers/vlynq/Kconfig" + source "drivers/xen/Kconfig" source "drivers/staging/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 9e7d4e56c85..00b44f4ccf0 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -105,6 +105,7 @@ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_OF) += of/ obj-$(CONFIG_SSB) += ssb/ obj-$(CONFIG_VIRTIO) += virtio/ +obj-$(CONFIG_VLYNQ) += vlynq/ obj-$(CONFIG_STAGING) += staging/ obj-y += platform/ obj-y += ieee802154/ diff --git a/drivers/base/node.c b/drivers/base/node.c index 40b809742a1..91d4087b403 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -72,10 +72,8 @@ static ssize_t node_read_meminfo(struct sys_device * dev, "Node %d Inactive(anon): %8lu kB\n" "Node %d Active(file): %8lu kB\n" "Node %d Inactive(file): %8lu kB\n" -#ifdef CONFIG_UNEVICTABLE_LRU "Node %d Unevictable: %8lu kB\n" "Node %d Mlocked: %8lu kB\n" -#endif #ifdef CONFIG_HIGHMEM "Node %d HighTotal: %8lu kB\n" "Node %d HighFree: %8lu kB\n" @@ -105,10 +103,8 @@ static ssize_t node_read_meminfo(struct sys_device * dev, nid, K(node_page_state(nid, NR_INACTIVE_ANON)), nid, K(node_page_state(nid, NR_ACTIVE_FILE)), nid, K(node_page_state(nid, NR_INACTIVE_FILE)), -#ifdef CONFIG_UNEVICTABLE_LRU nid, K(node_page_state(nid, NR_UNEVICTABLE)), nid, K(node_page_state(nid, NR_MLOCK)), -#endif #ifdef CONFIG_HIGHMEM nid, K(i.totalhigh), nid, K(i.freehigh), diff --git a/drivers/char/vt.c b/drivers/char/vt.c index c796a86ab7f..d9113b4c76e 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -171,8 +171,9 @@ int do_poke_blanked_console; int console_blanked; static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */ -static int blankinterval = 10*60*HZ; static int vesa_off_interval; +static int blankinterval = 10*60; +core_param(consoleblank, blankinterval, int, 0444); static DECLARE_WORK(console_work, console_callback); @@ -1485,7 +1486,7 @@ static void setterm_command(struct vc_data *vc) update_attr(vc); break; case 9: /* set blanking interval */ - blankinterval = ((vc->vc_par[1] < 60) ? vc->vc_par[1] : 60) * 60 * HZ; + blankinterval = ((vc->vc_par[1] < 60) ? vc->vc_par[1] : 60) * 60; poke_blanked_console(); break; case 10: /* set bell frequency in Hz */ @@ -2871,7 +2872,7 @@ static int __init con_init(void) if (blankinterval) { blank_state = blank_normal_wait; - mod_timer(&console_timer, jiffies + blankinterval); + mod_timer(&console_timer, jiffies + (blankinterval * HZ)); } for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) { @@ -3677,7 +3678,7 @@ void do_unblank_screen(int leaving_gfx) return; /* but leave console_blanked != 0 */ if (blankinterval) { - mod_timer(&console_timer, jiffies + blankinterval); + mod_timer(&console_timer, jiffies + (blankinterval * HZ)); blank_state = blank_normal_wait; } @@ -3711,7 +3712,7 @@ void unblank_screen(void) static void blank_screen_t(unsigned long dummy) { if (unlikely(!keventd_up())) { - mod_timer(&console_timer, jiffies + blankinterval); + mod_timer(&console_timer, jiffies + (blankinterval * HZ)); return; } blank_timer_expired = 1; @@ -3741,7 +3742,7 @@ void poke_blanked_console(void) if (console_blanked) unblank_screen(); else if (blankinterval) { - mod_timer(&console_timer, jiffies + blankinterval); + mod_timer(&console_timer, jiffies + (blankinterval * HZ)); blank_state = blank_normal_wait; } } diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index 40bd8c61c7d..72a633a6ec9 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -18,6 +18,7 @@ #include <linux/acpi_pmtmr.h> #include <linux/clocksource.h> +#include <linux/timex.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/pci.h> diff --git a/drivers/eisa/eisa.ids b/drivers/eisa/eisa.ids index ed69837d8b7..6cbb7a51443 100644 --- a/drivers/eisa/eisa.ids +++ b/drivers/eisa/eisa.ids @@ -1140,6 +1140,11 @@ NON0301 "c't Universale Graphic Adapter" NON0401 "c't Universal Ethernet Adapter" NON0501 "c't Universal 16-Bit Sound Adapter" NON0601 "c't Universal 8-Bit Adapter" +NPI0120 "Network Peripherals NP-EISA-1 FDDI Interface" +NPI0221 "Network Peripherals NP-EISA-2 FDDI Interface" +NPI0223 "Network Peripherals NP-EISA-2E Enhanced FDDI Interface" +NPI0301 "Network Peripherals NP-EISA-3 FDDI Interface" +NPI0303 "Network Peripherals NP-EISA-3E Enhanced FDDI Interface" NSS0011 "Newport Systems Solutions WNIC Adapter" NVL0701 "Novell NE3200 Bus Master Ethernet" NVL0702 "Novell NE3200T Bus Master Ethernet" diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c index 05aa2d406ac..d5ea8a68d33 100644 --- a/drivers/firmware/memmap.c +++ b/drivers/firmware/memmap.c @@ -31,8 +31,12 @@ * information is necessary as for the resource tree. */ struct firmware_map_entry { - resource_size_t start; /* start of the memory range */ - resource_size_t end; /* end of the memory range (incl.) */ + /* + * start and end must be u64 rather than resource_size_t, because e820 + * resources can lie at addresses above 4G. + */ + u64 start; /* start of the memory range */ + u64 end; /* end of the memory range (incl.) */ const char *type; /* type of the memory range */ struct list_head list; /* entry for the linked list */ struct kobject kobj; /* kobject for each entry */ @@ -101,7 +105,7 @@ static LIST_HEAD(map_entries); * Common implementation of firmware_map_add() and firmware_map_add_early() * which expects a pre-allocated struct firmware_map_entry. **/ -static int firmware_map_add_entry(resource_size_t start, resource_size_t end, +static int firmware_map_add_entry(u64 start, u64 end, const char *type, struct firmware_map_entry *entry) { @@ -132,8 +136,7 @@ static int firmware_map_add_entry(resource_size_t start, resource_size_t end, * * Returns 0 on success, or -ENOMEM if no memory could be allocated. **/ -int firmware_map_add(resource_size_t start, resource_size_t end, - const char *type) +int firmware_map_add(u64 start, u64 end, const char *type) { struct firmware_map_entry *entry; @@ -157,8 +160,7 @@ int firmware_map_add(resource_size_t start, resource_size_t end, * * Returns 0 on success, or -ENOMEM if no memory could be allocated. **/ -int __init firmware_map_add_early(resource_size_t start, resource_size_t end, - const char *type) +int __init firmware_map_add_early(u64 start, u64 end, const char *type) { struct firmware_map_entry *entry; diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 0ecf6b76a40..8e28e5993df 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -504,6 +504,14 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, info->fbops = &intelfb_ops; info->fix.line_length = fb->pitch; + + /* setup aperture base/size for vesafb takeover */ + info->aperture_base = dev->mode_config.fb_base; + if (IS_I9XX(dev)) + info->aperture_size = pci_resource_len(dev->pdev, 2); + else + info->aperture_size = pci_resource_len(dev->pdev, 0); + info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset; info->fix.smem_len = size; diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index f8090e137fe..2d5016691d4 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -950,6 +950,7 @@ config SENSORS_HDAPS config SENSORS_LIS3LV02D tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" depends on ACPI && INPUT + select INPUT_POLLDEV select NEW_LEDS select LEDS_CLASS default n @@ -977,6 +978,7 @@ config SENSORS_LIS3LV02D config SENSORS_LIS3_SPI tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" depends on !ACPI && SPI_MASTER && INPUT + select INPUT_POLLDEV default n help This driver provides support for the LIS3LV02Dx accelerometer connected diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index abca7e9f953..6679854c85b 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -27,9 +27,6 @@ #include <linux/types.h> #include <linux/platform_device.h> #include <linux/interrupt.h> -#include <linux/input.h> -#include <linux/kthread.h> -#include <linux/semaphore.h> #include <linux/delay.h> #include <linux/wait.h> #include <linux/poll.h> @@ -161,6 +158,7 @@ static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3}; static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3}; static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3}; static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3}; +static struct axis_conversion lis3lv02d_axis_xy_swap = {2, 1, 3}; static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3}; static struct axis_conversion lis3lv02d_axis_xy_rotated_left_usd = {-2, 1, -3}; static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3}; @@ -194,13 +192,16 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted), AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted), AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted), + AXIS_DMI_MATCH("NC2710", "HP Compaq 2710", xy_swap), AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted), AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted), AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd), AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd), AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right), - AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted), + AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted), + AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted), + AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right), /* Intel-based HP Pavilion dv5 */ AXIS_DMI_MATCH2("HPDV5_I", PRODUCT_NAME, "HP Pavilion dv5", @@ -216,7 +217,6 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { { NULL, } /* Laptop models without axis info (yet): * "NC6910" "HP Compaq 6910" - * HP Compaq 8710x Notebook PC / Mobile Workstation * "NC2400" "HP Compaq nc2400" * "NX74x0" "HP Compaq nx74" * "NX6325" "HP Compaq nx6325" @@ -324,7 +324,7 @@ static int lis3lv02d_remove(struct acpi_device *device, int type) flush_work(&hpled_led.work); led_classdev_unregister(&hpled_led.led_classdev); - return lis3lv02d_remove_fs(); + return lis3lv02d_remove_fs(&lis3_dev); } @@ -338,13 +338,7 @@ static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state) static int lis3lv02d_resume(struct acpi_device *device) { - /* put back the device in the right state (ACPI might turn it on) */ - mutex_lock(&lis3_dev.lock); - if (lis3_dev.usage > 0) - lis3lv02d_poweron(&lis3_dev); - else - lis3lv02d_poweroff(&lis3_dev); - mutex_unlock(&lis3_dev.lock); + lis3lv02d_poweron(&lis3_dev); return 0; } #else diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 778eb779598..271338bdb6b 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -27,9 +27,7 @@ #include <linux/types.h> #include <linux/platform_device.h> #include <linux/interrupt.h> -#include <linux/input.h> -#include <linux/kthread.h> -#include <linux/semaphore.h> +#include <linux/input-polldev.h> #include <linux/delay.h> #include <linux/wait.h> #include <linux/poll.h> @@ -105,56 +103,39 @@ static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z) { int position[3]; - position[0] = lis3_dev.read_data(lis3, OUTX); - position[1] = lis3_dev.read_data(lis3, OUTY); - position[2] = lis3_dev.read_data(lis3, OUTZ); + position[0] = lis3->read_data(lis3, OUTX); + position[1] = lis3->read_data(lis3, OUTY); + position[2] = lis3->read_data(lis3, OUTZ); - *x = lis3lv02d_get_axis(lis3_dev.ac.x, position); - *y = lis3lv02d_get_axis(lis3_dev.ac.y, position); - *z = lis3lv02d_get_axis(lis3_dev.ac.z, position); + *x = lis3lv02d_get_axis(lis3->ac.x, position); + *y = lis3lv02d_get_axis(lis3->ac.y, position); + *z = lis3lv02d_get_axis(lis3->ac.z, position); } void lis3lv02d_poweroff(struct lis3lv02d *lis3) { - lis3_dev.is_on = 0; + /* disable X,Y,Z axis and power down */ + lis3->write(lis3, CTRL_REG1, 0x00); } EXPORT_SYMBOL_GPL(lis3lv02d_poweroff); void lis3lv02d_poweron(struct lis3lv02d *lis3) { - lis3_dev.is_on = 1; - lis3_dev.init(lis3); -} -EXPORT_SYMBOL_GPL(lis3lv02d_poweron); + u8 reg; -/* - * To be called before starting to use the device. It makes sure that the - * device will always be on until a call to lis3lv02d_decrease_use(). Not to be - * used from interrupt context. - */ -static void lis3lv02d_increase_use(struct lis3lv02d *dev) -{ - mutex_lock(&dev->lock); - dev->usage++; - if (dev->usage == 1) { - if (!dev->is_on) - lis3lv02d_poweron(dev); - } - mutex_unlock(&dev->lock); -} + lis3->init(lis3); -/* - * To be called whenever a usage of the device is stopped. - * It will make sure to turn off the device when there is not usage. - */ -static void lis3lv02d_decrease_use(struct lis3lv02d *dev) -{ - mutex_lock(&dev->lock); - dev->usage--; - if (dev->usage == 0) - lis3lv02d_poweroff(dev); - mutex_unlock(&dev->lock); + /* + * Common configuration + * BDU: LSB and MSB values are not updated until both have been read. + * So the value read will always be correct. + */ + lis3->read(lis3, CTRL_REG2, ®); + reg |= CTRL2_BDU; + lis3->write(lis3, CTRL_REG2, reg); } +EXPORT_SYMBOL_GPL(lis3lv02d_poweron); + static irqreturn_t lis302dl_interrupt(int irq, void *dummy) { @@ -198,15 +179,12 @@ static int lis3lv02d_misc_open(struct inode *inode, struct file *file) printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", lis3_dev.irq); return -EBUSY; } - lis3lv02d_increase_use(&lis3_dev); - printk("lis3: registered interrupt %d\n", lis3_dev.irq); return 0; } static int lis3lv02d_misc_release(struct inode *inode, struct file *file) { fasync_helper(-1, file, 0, &lis3_dev.async_queue); - lis3lv02d_decrease_use(&lis3_dev); free_irq(lis3_dev.irq, &lis3_dev); clear_bit(0, &lis3_dev.misc_opened); /* release the device */ return 0; @@ -290,46 +268,16 @@ static struct miscdevice lis3lv02d_misc_device = { .fops = &lis3lv02d_misc_fops, }; -/** - * lis3lv02d_joystick_kthread - Kthread polling function - * @data: unused - here to conform to threadfn prototype - */ -static int lis3lv02d_joystick_kthread(void *data) +static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev) { int x, y, z; - while (!kthread_should_stop()) { - lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); - input_report_abs(lis3_dev.idev, ABS_X, x - lis3_dev.xcalib); - input_report_abs(lis3_dev.idev, ABS_Y, y - lis3_dev.ycalib); - input_report_abs(lis3_dev.idev, ABS_Z, z - lis3_dev.zcalib); - - input_sync(lis3_dev.idev); - - try_to_freeze(); - msleep_interruptible(MDPS_POLL_INTERVAL); - } - - return 0; -} - -static int lis3lv02d_joystick_open(struct input_dev *input) -{ - lis3lv02d_increase_use(&lis3_dev); - lis3_dev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d"); - if (IS_ERR(lis3_dev.kthread)) { - lis3lv02d_decrease_use(&lis3_dev); - return PTR_ERR(lis3_dev.kthread); - } - - return 0; + lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); + input_report_abs(pidev->input, ABS_X, x - lis3_dev.xcalib); + input_report_abs(pidev->input, ABS_Y, y - lis3_dev.ycalib); + input_report_abs(pidev->input, ABS_Z, z - lis3_dev.zcalib); } -static void lis3lv02d_joystick_close(struct input_dev *input) -{ - kthread_stop(lis3_dev.kthread); - lis3lv02d_decrease_use(&lis3_dev); -} static inline void lis3lv02d_calibrate_joystick(void) { @@ -339,33 +287,36 @@ static inline void lis3lv02d_calibrate_joystick(void) int lis3lv02d_joystick_enable(void) { + struct input_dev *input_dev; int err; if (lis3_dev.idev) return -EINVAL; - lis3_dev.idev = input_allocate_device(); + lis3_dev.idev = input_allocate_polled_device(); if (!lis3_dev.idev) return -ENOMEM; + lis3_dev.idev->poll = lis3lv02d_joystick_poll; + lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL; + input_dev = lis3_dev.idev->input; + lis3lv02d_calibrate_joystick(); - lis3_dev.idev->name = "ST LIS3LV02DL Accelerometer"; - lis3_dev.idev->phys = DRIVER_NAME "/input0"; - lis3_dev.idev->id.bustype = BUS_HOST; - lis3_dev.idev->id.vendor = 0; - lis3_dev.idev->dev.parent = &lis3_dev.pdev->dev; - lis3_dev.idev->open = lis3lv02d_joystick_open; - lis3_dev.idev->close = lis3lv02d_joystick_close; + input_dev->name = "ST LIS3LV02DL Accelerometer"; + input_dev->phys = DRIVER_NAME "/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0; + input_dev->dev.parent = &lis3_dev.pdev->dev; - set_bit(EV_ABS, lis3_dev.idev->evbit); - input_set_abs_params(lis3_dev.idev, ABS_X, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); - input_set_abs_params(lis3_dev.idev, ABS_Y, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); - input_set_abs_params(lis3_dev.idev, ABS_Z, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); + set_bit(EV_ABS, input_dev->evbit); + input_set_abs_params(input_dev, ABS_X, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); + input_set_abs_params(input_dev, ABS_Y, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); + input_set_abs_params(input_dev, ABS_Z, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); - err = input_register_device(lis3_dev.idev); + err = input_register_polled_device(lis3_dev.idev); if (err) { - input_free_device(lis3_dev.idev); + input_free_polled_device(lis3_dev.idev); lis3_dev.idev = NULL; } @@ -378,8 +329,9 @@ void lis3lv02d_joystick_disable(void) if (!lis3_dev.idev) return; - misc_deregister(&lis3lv02d_misc_device); - input_unregister_device(lis3_dev.idev); + if (lis3_dev.irq) + misc_deregister(&lis3lv02d_misc_device); + input_unregister_polled_device(lis3_dev.idev); lis3_dev.idev = NULL; } EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable); @@ -390,9 +342,7 @@ static ssize_t lis3lv02d_position_show(struct device *dev, { int x, y, z; - lis3lv02d_increase_use(&lis3_dev); lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); - lis3lv02d_decrease_use(&lis3_dev); return sprintf(buf, "(%d,%d,%d)\n", x, y, z); } @@ -406,9 +356,7 @@ static ssize_t lis3lv02d_calibrate_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - lis3lv02d_increase_use(&lis3_dev); lis3lv02d_calibrate_joystick(); - lis3lv02d_decrease_use(&lis3_dev); return count; } @@ -420,9 +368,7 @@ static ssize_t lis3lv02d_rate_show(struct device *dev, u8 ctrl; int val; - lis3lv02d_increase_use(&lis3_dev); lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl); - lis3lv02d_decrease_use(&lis3_dev); val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4; return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]); } @@ -446,17 +392,17 @@ static struct attribute_group lis3lv02d_attribute_group = { static int lis3lv02d_add_fs(struct lis3lv02d *lis3) { - lis3_dev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); - if (IS_ERR(lis3_dev.pdev)) - return PTR_ERR(lis3_dev.pdev); + lis3->pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); + if (IS_ERR(lis3->pdev)) + return PTR_ERR(lis3->pdev); - return sysfs_create_group(&lis3_dev.pdev->dev.kobj, &lis3lv02d_attribute_group); + return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); } -int lis3lv02d_remove_fs(void) +int lis3lv02d_remove_fs(struct lis3lv02d *lis3) { - sysfs_remove_group(&lis3_dev.pdev->dev.kobj, &lis3lv02d_attribute_group); - platform_device_unregister(lis3_dev.pdev); + sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); + platform_device_unregister(lis3->pdev); return 0; } EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs); @@ -482,18 +428,35 @@ int lis3lv02d_init_device(struct lis3lv02d *dev) break; default: printk(KERN_ERR DRIVER_NAME - ": unknown sensor type 0x%X\n", lis3_dev.whoami); + ": unknown sensor type 0x%X\n", dev->whoami); return -EINVAL; } - mutex_init(&dev->lock); lis3lv02d_add_fs(dev); - lis3lv02d_increase_use(dev); + lis3lv02d_poweron(dev); if (lis3lv02d_joystick_enable()) printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); - printk("lis3_init_device: irq %d\n", dev->irq); + /* passing in platform specific data is purely optional and only + * used by the SPI transport layer at the moment */ + if (dev->pdata) { + struct lis3lv02d_platform_data *p = dev->pdata; + + if (p->click_flags && (dev->whoami == LIS_SINGLE_ID)) { + dev->write(dev, CLICK_CFG, p->click_flags); + dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit); + dev->write(dev, CLICK_LATENCY, p->click_latency); + dev->write(dev, CLICK_WINDOW, p->click_window); + dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf); + dev->write(dev, CLICK_THSY_X, + (p->click_thresh_x & 0xf) | + (p->click_thresh_y << 4)); + } + + if (p->irq_cfg) + dev->write(dev, CTRL_REG3, p->irq_cfg); + } /* bail if we did not get an IRQ from the bus layer */ if (!dev->irq) { @@ -502,11 +465,9 @@ int lis3lv02d_init_device(struct lis3lv02d *dev) goto out; } - printk("lis3: registering device\n"); if (misc_register(&lis3lv02d_misc_device)) printk(KERN_ERR DRIVER_NAME ": misc_register failed\n"); out: - lis3lv02d_decrease_use(dev); return 0; } EXPORT_SYMBOL_GPL(lis3lv02d_init_device); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h index 745ec96806d..e320e2f511f 100644 --- a/drivers/hwmon/lis3lv02d.h +++ b/drivers/hwmon/lis3lv02d.h @@ -18,6 +18,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/platform_device.h> +#include <linux/input-polldev.h> /* * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to @@ -27,12 +29,14 @@ * They can also be connected via I²C. */ +#include <linux/lis3lv02d.h> + /* 2-byte registers */ #define LIS_DOUBLE_ID 0x3A /* LIS3LV02D[LQ] */ /* 1-byte registers */ #define LIS_SINGLE_ID 0x3B /* LIS[32]02DL and others */ -enum lis3lv02d_reg { +enum lis3_reg { WHO_AM_I = 0x0F, OFFSET_X = 0x16, OFFSET_Y = 0x17, @@ -60,6 +64,19 @@ enum lis3lv02d_reg { FF_WU_THS_L = 0x34, FF_WU_THS_H = 0x35, FF_WU_DURATION = 0x36, +}; + +enum lis302d_reg { + CLICK_CFG = 0x38, + CLICK_SRC = 0x39, + CLICK_THSY_X = 0x3B |