diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/video/aty/atyfb_base.c | 829 |
1 files changed, 458 insertions, 371 deletions
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 63d3739d43a..913b4a47ae5 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -132,7 +132,7 @@ #endif #define PRINTKI(fmt, args...) printk(KERN_INFO "atyfb: " fmt, ## args) -#define PRINTKE(fmt, args...) printk(KERN_ERR "atyfb: " fmt, ## args) +#define PRINTKE(fmt, args...) printk(KERN_ERR "atyfb: " fmt, ## args) #if defined(CONFIG_PM) || defined(CONFIG_PMAC_BACKLIGHT) || \ defined (CONFIG_FB_ATY_GENERIC_LCD) || defined(CONFIG_FB_ATY_BACKLIGHT) @@ -188,24 +188,23 @@ u32 aty_ld_lcd(int index, const struct atyfb_par *par) */ static void ATIReduceRatio(int *Numerator, int *Denominator) { - int Multiplier, Divider, Remainder; + int Multiplier, Divider, Remainder; - Multiplier = *Numerator; - Divider = *Denominator; + Multiplier = *Numerator; + Divider = *Denominator; - while ((Remainder = Multiplier % Divider)) - { - Multiplier = Divider; - Divider = Remainder; - } + while ((Remainder = Multiplier % Divider)) { + Multiplier = Divider; + Divider = Remainder; + } - *Numerator /= Divider; - *Denominator /= Divider; + *Numerator /= Divider; + *Denominator /= Divider; } #endif - /* - * The Hardware parameters for each card - */ +/* + * The Hardware parameters for each card + */ struct pci_mmap_map { unsigned long voff; @@ -223,17 +222,19 @@ static struct fb_fix_screeninfo atyfb_fix __devinitdata = { .ypanstep = 1, }; - /* - * Frame buffer device API - */ +/* + * Frame buffer device API + */ static int atyfb_open(struct fb_info *info, int user); static int atyfb_release(struct fb_info *info, int user); -static int atyfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info); +static int atyfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info); static int atyfb_set_par(struct fb_info *info); static int atyfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, - u_int transp, struct fb_info *info); -static int atyfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info); + u_int transp, struct fb_info *info); +static int atyfb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info); static int atyfb_blank(int blank, struct fb_info *info); static int atyfb_ioctl(struct fb_info *info, u_int cmd, u_long arg); #ifdef __sparc__ @@ -241,9 +242,9 @@ static int atyfb_mmap(struct fb_info *info, struct vm_area_struct *vma); #endif static int atyfb_sync(struct fb_info *info); - /* - * Internal routines - */ +/* + * Internal routines + */ static int aty_init(struct fb_info *info); @@ -254,8 +255,11 @@ static int store_video_par(char *videopar, unsigned char m64_num); static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc); static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc); -static int aty_var_to_crtc(const struct fb_info *info, const struct fb_var_screeninfo *var, struct crtc *crtc); -static int aty_crtc_to_var(const struct crtc *crtc, struct fb_var_screeninfo *var); +static int aty_var_to_crtc(const struct fb_info *info, + const struct fb_var_screeninfo *var, + struct crtc *crtc); +static int aty_crtc_to_var(const struct crtc *crtc, + struct fb_var_screeninfo *var); static void set_off_pitch(struct atyfb_par *par, const struct fb_info *info); #ifdef CONFIG_PPC static int read_aty_sense(const struct atyfb_par *par); @@ -264,9 +268,9 @@ static int read_aty_sense(const struct atyfb_par *par); static DEFINE_MUTEX(reboot_lock); static struct fb_info *reboot_info; - /* - * Interface used by the world - */ +/* + * Interface used by the world + */ static struct fb_var_screeninfo default_var = { /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */ @@ -452,14 +456,14 @@ static int __devinit correct_chipset(struct atyfb_par *par) type = chip_id & CFG_CHIP_TYPE; rev = (chip_id & CFG_CHIP_REV) >> 24; - switch(par->pci_id) { + switch (par->pci_id) { #ifdef CONFIG_FB_ATY_GX case PCI_CHIP_MACH64GX: - if(type != 0x00d7) + if (type != 0x00d7) return -ENODEV; break; case PCI_CHIP_MACH64CX: - if(type != 0x0057) + if (type != 0x0057) return -ENODEV; break; #endif @@ -564,7 +568,8 @@ static char *aty_xl_ram[8] __devinitdata = { }; #endif /* CONFIG_FB_ATY_CT */ -static u32 atyfb_get_pixclock(struct fb_var_screeninfo *var, struct atyfb_par *par) +static u32 atyfb_get_pixclock(struct fb_var_screeninfo *var, + struct atyfb_par *par) { u32 pixclock = var->pixclock; #ifdef CONFIG_FB_ATY_GENERIC_LCD @@ -572,7 +577,7 @@ static u32 atyfb_get_pixclock(struct fb_var_screeninfo *var, struct atyfb_par *p par->pll.ct.xres = 0; if (par->lcd_table != 0) { lcd_on_off = aty_ld_lcd(LCD_GEN_CNTL, par); - if(lcd_on_off & LCD_ON) { + if (lcd_on_off & LCD_ON) { par->pll.ct.xres = var->xres; pixclock = par->lcd_pixclock; } @@ -584,7 +589,7 @@ static u32 atyfb_get_pixclock(struct fb_var_screeninfo *var, struct atyfb_par *p #if defined(CONFIG_PPC) /* - * Apple monitor sense + * Apple monitor sense */ static int __devinit read_aty_sense(const struct atyfb_par *par) @@ -625,16 +630,16 @@ static int __devinit read_aty_sense(const struct atyfb_par *par) /* ------------------------------------------------------------------------- */ /* - * CRTC programming + * CRTC programming */ static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc) { #ifdef CONFIG_FB_ATY_GENERIC_LCD if (par->lcd_table != 0) { - if(!M64_HAS(LT_LCD_REGS)) { - crtc->lcd_index = aty_ld_le32(LCD_INDEX, par); - aty_st_le32(LCD_INDEX, crtc->lcd_index, par); + if (!M64_HAS(LT_LCD_REGS)) { + crtc->lcd_index = aty_ld_le32(LCD_INDEX, par); + aty_st_le32(LCD_INDEX, crtc->lcd_index, par); } crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par); crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par); @@ -642,7 +647,7 @@ static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc) /* switch to non shadow registers */ aty_st_lcd(LCD_GEN_CNTL, crtc->lcd_gen_cntl & - ~(CRTC_RW_SELECT | SHADOW_EN | SHADOW_RW_EN), par); + ~(CRTC_RW_SELECT | SHADOW_EN | SHADOW_RW_EN), par); /* save stretching */ crtc->horz_stretching = aty_ld_lcd(HORZ_STRETCHING, par); @@ -663,7 +668,7 @@ static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc) if (par->lcd_table != 0) { /* switch to shadow registers */ aty_st_lcd(LCD_GEN_CNTL, (crtc->lcd_gen_cntl & ~CRTC_RW_SELECT) | - SHADOW_EN | SHADOW_RW_EN, par); + SHADOW_EN | SHADOW_RW_EN, par); crtc->shadow_h_tot_disp = aty_ld_le32(CRTC_H_TOTAL_DISP, par); crtc->shadow_h_sync_strt_wid = aty_ld_le32(CRTC_H_SYNC_STRT_WID, par); @@ -680,21 +685,20 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc) #ifdef CONFIG_FB_ATY_GENERIC_LCD if (par->lcd_table != 0) { /* stop CRTC */ - aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl & ~(CRTC_EXT_DISP_EN | CRTC_EN), par); + aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl & + ~(CRTC_EXT_DISP_EN | CRTC_EN), par); /* update non-shadow registers first */ aty_st_lcd(CNFG_PANEL, crtc->lcd_config_panel, par); aty_st_lcd(LCD_GEN_CNTL, crtc->lcd_gen_cntl & - ~(CRTC_RW_SELECT | SHADOW_EN | SHADOW_RW_EN), par); + ~(CRTC_RW_SELECT | SHADOW_EN | SHADOW_RW_EN), par); /* temporarily disable stretching */ - aty_st_lcd(HORZ_STRETCHING, - crtc->horz_stretching & - ~(HORZ_STRETCH_MODE | HORZ_STRETCH_EN), par); - aty_st_lcd(VERT_STRETCHING, - crtc->vert_stretching & - ~(VERT_STRETCH_RATIO1 | VERT_STRETCH_RATIO2 | - VERT_STRETCH_USE0 | VERT_STRETCH_EN), par); + aty_st_lcd(HORZ_STRETCHING, crtc->horz_stretching & + ~(HORZ_STRETCH_MODE | HORZ_STRETCH_EN), par); + aty_st_lcd(VERT_STRETCHING, crtc->vert_stretching & + ~(VERT_STRETCH_RATIO1 | VERT_STRETCH_RATIO2 | + VERT_STRETCH_USE0 | VERT_STRETCH_EN), par); } #endif /* turn off CRT */ @@ -702,17 +706,19 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc) DPRINTK("setting up CRTC\n"); DPRINTK("set primary CRT to %ix%i %c%c composite %c\n", - ((((crtc->h_tot_disp>>16) & 0xff) + 1)<<3), (((crtc->v_tot_disp>>16) & 0x7ff) + 1), - (crtc->h_sync_strt_wid & 0x200000)?'N':'P', (crtc->v_sync_strt_wid & 0x200000)?'N':'P', - (crtc->gen_cntl & CRTC_CSYNC_EN)?'P':'N'); - - DPRINTK("CRTC_H_TOTAL_DISP: %x\n",crtc->h_tot_disp); - DPRINTK("CRTC_H_SYNC_STRT_WID: %x\n",crtc->h_sync_strt_wid); - DPRINTK("CRTC_V_TOTAL_DISP: %x\n",crtc->v_tot_disp); - DPRINTK("CRTC_V_SYNC_STRT_WID: %x\n",crtc->v_sync_strt_wid); + ((((crtc->h_tot_disp >> 16) & 0xff) + 1) << 3), + (((crtc->v_tot_disp >> 16) & 0x7ff) + 1), + (crtc->h_sync_strt_wid & 0x200000) ? 'N' : 'P', + (crtc->v_sync_strt_wid & 0x200000) ? 'N' : 'P', + (crtc->gen_cntl & CRTC_CSYNC_EN) ? 'P' : 'N'); + + DPRINTK("CRTC_H_TOTAL_DISP: %x\n", crtc->h_tot_disp); + DPRINTK("CRTC_H_SYNC_STRT_WID: %x\n", crtc->h_sync_strt_wid); + DPRINTK("CRTC_V_TOTAL_DISP: %x\n", crtc->v_tot_disp); + DPRINTK("CRTC_V_SYNC_STRT_WID: %x\n", crtc->v_sync_strt_wid); DPRINTK("CRTC_OFF_PITCH: %x\n", crtc->off_pitch); DPRINTK("CRTC_VLINE_CRNT_VLINE: %x\n", crtc->vline_crnt_vline); - DPRINTK("CRTC_GEN_CNTL: %x\n",crtc->gen_cntl); + DPRINTK("CRTC_GEN_CNTL: %x\n", crtc->gen_cntl); aty_st_le32(CRTC_H_TOTAL_DISP, crtc->h_tot_disp, par); aty_st_le32(CRTC_H_SYNC_STRT_WID, crtc->h_sync_strt_wid, par); @@ -732,16 +738,22 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc) if (par->lcd_table != 0) { /* switch to shadow registers */ aty_st_lcd(LCD_GEN_CNTL, (crtc->lcd_gen_cntl & ~CRTC_RW_SELECT) | - (SHADOW_EN | SHADOW_RW_EN), par); + SHADOW_EN | SHADOW_RW_EN, par); DPRINTK("set shadow CRT to %ix%i %c%c\n", - ((((crtc->shadow_h_tot_disp>>16) & 0xff) + 1)<<3), (((crtc->shadow_v_tot_disp>>16) & 0x7ff) + 1), - (crtc->shadow_h_sync_strt_wid & 0x200000)?'N':'P', (crtc->shadow_v_sync_strt_wid & 0x200000)?'N':'P'); - - DPRINTK("SHADOW CRTC_H_TOTAL_DISP: %x\n", crtc->shadow_h_tot_disp); - DPRINTK("SHADOW CRTC_H_SYNC_STRT_WID: %x\n", crtc->shadow_h_sync_strt_wid); - DPRINTK("SHADOW CRTC_V_TOTAL_DISP: %x\n", crtc->shadow_v_tot_disp); - DPRINTK("SHADOW CRTC_V_SYNC_STRT_WID: %x\n", crtc->shadow_v_sync_strt_wid); + ((((crtc->shadow_h_tot_disp >> 16) & 0xff) + 1) << 3), + (((crtc->shadow_v_tot_disp >> 16) & 0x7ff) + 1), + (crtc->shadow_h_sync_strt_wid & 0x200000) ? 'N' : 'P', + (crtc->shadow_v_sync_strt_wid & 0x200000) ? 'N' : 'P'); + + DPRINTK("SHADOW CRTC_H_TOTAL_DISP: %x\n", + crtc->shadow_h_tot_disp); + DPRINTK("SHADOW CRTC_H_SYNC_STRT_WID: %x\n", + crtc->shadow_h_sync_strt_wid); + DPRINTK("SHADOW CRTC_V_TOTAL_DISP: %x\n", + crtc->shadow_v_tot_disp); + DPRINTK("SHADOW CRTC_V_SYNC_STRT_WID: %x\n", + crtc->shadow_v_sync_strt_wid); aty_st_le32(CRTC_H_TOTAL_DISP, crtc->shadow_h_tot_disp, par); aty_st_le32(CRTC_H_SYNC_STRT_WID, crtc->shadow_h_sync_strt_wid, par); @@ -752,16 +764,16 @@ static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc) DPRINTK("LCD_GEN_CNTL: %x\n", crtc->lcd_gen_cntl); DPRINTK("HORZ_STRETCHING: %x\n", crtc->horz_stretching); DPRINTK("VERT_STRETCHING: %x\n", crtc->vert_stretching); - if(!M64_HAS(LT_LCD_REGS)) - DPRINTK("EXT_VERT_STRETCH: %x\n", crtc->ext_vert_stretch); + if (!M64_HAS(LT_LCD_REGS)) + DPRINTK("EXT_VERT_STRETCH: %x\n", crtc->ext_vert_stretch); aty_st_lcd(LCD_GEN_CNTL, crtc->lcd_gen_cntl, par); aty_st_lcd(HORZ_STRETCHING, crtc->horz_stretching, par); aty_st_lcd(VERT_STRETCHING, crtc->vert_stretching, par); - if(!M64_HAS(LT_LCD_REGS)) { - aty_st_lcd(EXT_VERT_STRETCH, crtc->ext_vert_stretch, par); - aty_ld_le32(LCD_INDEX, par); - aty_st_le32(LCD_INDEX, crtc->lcd_index, par); + if (!M64_HAS(LT_LCD_REGS)) { + aty_st_lcd(EXT_VERT_STRETCH, crtc->ext_vert_stretch, par); + aty_ld_le32(LCD_INDEX, par); + aty_st_le32(LCD_INDEX, crtc->lcd_index, par); } } #endif /* CONFIG_FB_ATY_GENERIC_LCD */ @@ -779,7 +791,8 @@ static u32 calc_line_length(struct atyfb_par *par, u32 vxres, u32 bpp) } static int aty_var_to_crtc(const struct fb_info *info, - const struct fb_var_screeninfo *var, struct crtc *crtc) + const struct fb_var_screeninfo *var, + struct crtc *crtc) { struct atyfb_par *par = (struct atyfb_par *) info->par; u32 xres, yres, vxres, vyres, xoffset, yoffset, bpp; @@ -814,34 +827,32 @@ static int aty_var_to_crtc(const struct fb_info *info, if (bpp <= 8) { bpp = 8; pix_width = CRTC_PIX_WIDTH_8BPP; - dp_pix_width = - HOST_8BPP | SRC_8BPP | DST_8BPP | - BYTE_ORDER_LSB_TO_MSB; + dp_pix_width = HOST_8BPP | SRC_8BPP | DST_8BPP | + BYTE_ORDER_LSB_TO_MSB; dp_chain_mask = DP_CHAIN_8BPP; } else if (bpp <= 15) { bpp = 16; pix_width = CRTC_PIX_WIDTH_15BPP; dp_pix_width = HOST_15BPP | SRC_15BPP | DST_15BPP | - BYTE_ORDER_LSB_TO_MSB; + BYTE_ORDER_LSB_TO_MSB; dp_chain_mask = DP_CHAIN_15BPP; } else if (bpp <= 16) { bpp = 16; pix_width = CRTC_PIX_WIDTH_16BPP; dp_pix_width = HOST_16BPP | SRC_16BPP | DST_16BPP | - BYTE_ORDER_LSB_TO_MSB; + BYTE_ORDER_LSB_TO_MSB; dp_chain_mask = DP_CHAIN_16BPP; } else if (bpp <= 24 && M64_HAS(INTEGRATED)) { bpp = 24; pix_width = CRTC_PIX_WIDTH_24BPP; - dp_pix_width = - HOST_8BPP | SRC_8BPP | DST_8BPP | - BYTE_ORDER_LSB_TO_MSB; + dp_pix_width = HOST_8BPP | SRC_8BPP | DST_8BPP | + BYTE_ORDER_LSB_TO_MSB; dp_chain_mask = DP_CHAIN_24BPP; } else if (bpp <= 32) { bpp = 32; pix_width = CRTC_PIX_WIDTH_32BPP; dp_pix_width = HOST_32BPP | SRC_32BPP | DST_32BPP | - BYTE_ORDER_LSB_TO_MSB; + BYTE_ORDER_LSB_TO_MSB; dp_chain_mask = DP_CHAIN_32BPP; } else FAIL("invalid bpp"); @@ -854,9 +865,9 @@ static int aty_var_to_crtc(const struct fb_info *info, h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1; v_sync_pol = sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1; - if((xres > 1600) || (yres > 1200)) { + if ((xres > 1600) || (yres > 1200)) { FAIL("MACH64 chips are designed for max 1600x1200\n" - "select anoter resolution."); + "select anoter resolution."); } h_sync_strt = h_disp + var->right_margin; h_sync_end = h_sync_strt + var->hsync_len; @@ -869,11 +880,12 @@ static int aty_var_to_crtc(const struct fb_info *info, #ifdef CONFIG_FB_ATY_GENERIC_LCD if (par->lcd_table != 0) { - if(!M64_HAS(LT_LCD_REGS)) { - u32 lcd_index = aty_ld_le32(LCD_INDEX, par); - crtc->lcd_index = lcd_index & - ~(LCD_INDEX_MASK | LCD_DISPLAY_DIS | LCD_SRC_SEL | CRTC2_DISPLAY_DIS); - aty_st_le32(LCD_INDEX, lcd_index, par); + if (!M64_HAS(LT_LCD_REGS)) { + u32 lcd_index = aty_ld_le32(LCD_INDEX, par); + crtc->lcd_index = lcd_index & + ~(LCD_INDEX_MASK | LCD_DISPLAY_DIS | + LCD_SRC_SEL | CRTC2_DISPLAY_DIS); + aty_st_le32(LCD_INDEX, lcd_index, par); } if (!M64_HAS(MOBIL_BUS)) @@ -888,12 +900,14 @@ static int aty_var_to_crtc(const struct fb_info *info, USE_SHADOWED_ROWCUR | SHADOW_EN | SHADOW_RW_EN); crtc->lcd_gen_cntl |= DONT_SHADOW_VPAR | LOCK_8DOT; - if((crtc->lcd_gen_cntl & LCD_ON) && - ((xres > par->lcd_width) || (yres > par->lcd_height))) { - /* We cannot display the mode on the LCD. If the CRT is enabled - we can turn off the LCD. - If the CRT is off, it isn't a good idea to switch it on; we don't - know if one is connected. So it's better to fail then. + if ((crtc->lcd_gen_cntl & LCD_ON) && + ((xres > par->lcd_width) || (yres > par->lcd_height))) { + /* + * We cannot display the mode on the LCD. If the CRT is + * enabled we can turn off the LCD. + * If the CRT is off, it isn't a good idea to switch it + * on; we don't know if one is connected. So it's better + * to fail then. */ if (crtc->lcd_gen_cntl & CRT_ON) { if (!(var->activate & FB_ACTIVATE_TEST)) @@ -916,17 +930,18 @@ static int aty_var_to_crtc(const struct fb_info *info, vmode &= ~(FB_VMODE_DOUBLE | FB_VMODE_INTERLACED); - /* This is horror! When we simulate, say 640x480 on an 800x600 - LCD monitor, the CRTC should be programmed 800x600 values for - the non visible part, but 640x480 for the visible part. - This code has been tested on a laptop with it's 1400x1050 LCD - monitor and a conventional monitor both switched on. - Tested modes: 1280x1024, 1152x864, 1024x768, 800x600, - works with little glitches also with DOUBLESCAN modes + /* + * This is horror! When we simulate, say 640x480 on an 800x600 + * LCD monitor, the CRTC should be programmed 800x600 values for + * the non visible part, but 640x480 for the visible part. + * This code has been tested on a laptop with it's 1400x1050 LCD + * monitor and a conventional monitor both switched on. + * Tested modes: 1280x1024, 1152x864, 1024x768, 800x600, + * works with little glitches also with DOUBLESCAN modes */ if (yres < par->lcd_height) { VScan = par->lcd_height / yres; - if(VScan > 1) { + if (VScan > 1) { VScan = 2; vmode |= FB_VMODE_DOUBLE; } @@ -952,7 +967,7 @@ static int aty_var_to_crtc(const struct fb_info *info, FAIL_MAX("h_disp too large", h_disp, 0xff); FAIL_MAX("h_sync_strt too large", h_sync_strt, 0x1ff); /*FAIL_MAX("h_sync_wid too large", h_sync_wid, 0x1f);*/ - if(h_sync_wid > 0x1f) + if (h_sync_wid > 0x1f) h_sync_wid = 0x1f; FAIL_MAX("h_total too large", h_total, 0x1ff); @@ -978,7 +993,7 @@ static int aty_var_to_crtc(const struct fb_info *info, FAIL_MAX("v_disp too large", v_disp, 0x7ff); FAIL_MAX("v_sync_stsrt too large", v_sync_strt, 0x7ff); /*FAIL_MAX("v_sync_wid too large", v_sync_wid, 0x1f);*/ - if(v_sync_wid > 0x1f) + if (v_sync_wid > 0x1f) v_sync_wid = 0x1f; FAIL_MAX("v_total too large", v_total, 0x7ff); @@ -995,11 +1010,13 @@ static int aty_var_to_crtc(const struct fb_info *info, ((line_length / bpp) << 22); crtc->vline_crnt_vline = 0; - crtc->h_tot_disp = h_total | (h_disp<<16); - crtc->h_sync_strt_wid = (h_sync_strt & 0xff) | (h_sync_dly<<8) | - ((h_sync_strt & 0x100)<<4) | (h_sync_wid<<16) | (h_sync_pol<<21); - crtc->v_tot_disp = v_total | (v_disp<<16); - crtc->v_sync_strt_wid = v_sync_strt | (v_sync_wid<<16) | (v_sync_pol<<21); + crtc->h_tot_disp = h_total | (h_disp << 16); + crtc->h_sync_strt_wid = (h_sync_strt & 0xff) | (h_sync_dly << 8) | + ((h_sync_strt & 0x100) << 4) | (h_sync_wid << 16) | + (h_sync_pol << 21); + crtc->v_tot_disp = v_total | (v_disp << 16); + crtc->v_sync_strt_wid = v_sync_strt | (v_sync_wid << 16) | + (v_sync_pol << 21); /* crtc->gen_cntl = aty_ld_le32(CRTC_GEN_CNTL, par) & CRTC_PRESERVED_MASK; */ crtc->gen_cntl = CRTC_EXT_DISP_EN | CRTC_EN | pix_width | c_sync; @@ -1014,13 +1031,15 @@ static int aty_var_to_crtc(const struct fb_info *info, #ifdef CONFIG_FB_ATY_GENERIC_LCD if (par->lcd_table != 0) { vdisplay = yres; - if(vmode & FB_VMODE_DOUBLE) + if (vmode & FB_VMODE_DOUBLE) vdisplay <<= 1; crtc->gen_cntl &= ~(CRTC2_EN | CRTC2_PIX_WIDTH); crtc->lcd_gen_cntl &= ~(HORZ_DIVBY2_EN | DIS_HOR_CRT_DIVBY2 | - /*TVCLK_PM_EN | VCLK_DAC_PM_EN |*/ - USE_SHADOWED_VEND | USE_SHADOWED_ROWCUR | SHADOW_EN | SHADOW_RW_EN); - crtc->lcd_gen_cntl |= (DONT_SHADOW_VPAR/* | LOCK_8DOT*/); + /*TVCLK_PM_EN | VCLK_DAC_PM_EN |*/ + USE_SHADOWED_VEND | + USE_SHADOWED_ROWCUR | + SHADOW_EN | SHADOW_RW_EN); + crtc->lcd_gen_cntl |= DONT_SHADOW_VPAR/* | LOCK_8DOT*/; /* MOBILITY M1 tested, FIXME: LT */ crtc->horz_stretching = aty_ld_lcd(HORZ_STRETCHING, par); @@ -1028,28 +1047,32 @@ static int aty_var_to_crtc(const struct fb_info *info, crtc->ext_vert_stretch = aty_ld_lcd(EXT_VERT_STRETCH, par) & ~(AUTO_VERT_RATIO | VERT_STRETCH_MODE | VERT_STRETCH_RATIO3); - crtc->horz_stretching &= - ~(HORZ_STRETCH_RATIO | HORZ_STRETCH_LOOP | AUTO_HORZ_RATIO | - HORZ_STRETCH_MODE | HORZ_STRETCH_EN); + crtc->horz_stretching &= ~(HORZ_STRETCH_RATIO | + HORZ_STRETCH_LOOP | AUTO_HORZ_RATIO | + HORZ_STRETCH_MODE | HORZ_STRETCH_EN); if (xres < par->lcd_width && crtc->lcd_gen_cntl & LCD_ON) { do { /* - * The horizontal blender misbehaves when HDisplay is less than a - * a certain threshold (440 for a 1024-wide panel). It doesn't - * stretch such modes enough. Use pixel replication instead of - * blending to stretch modes that can be made to exactly fit the - * panel width. The undocumented "NoLCDBlend" option allows the - * pixel-replicated mode to be slightly wider or narrower than the - * panel width. It also causes a mode that is exactly half as wide - * as the panel to be pixel-replicated, rather than blended. - */ + * The horizontal blender misbehaves when + * HDisplay is less than a certain threshold + * (440 for a 1024-wide panel). It doesn't + * stretch such modes enough. Use pixel + * replication instead of blending to stretch + * modes that can be made to exactly fit the + * panel width. The undocumented "NoLCDBlend" + * option allows the pixel-replicated mode to + * be slightly wider or narrower than the + * panel width. It also causes a mode that is + * exactly half as wide as the panel to be + * pixel-replicated, rather than blended. + */ int HDisplay = xres & ~7; int nStretch = par->lcd_width / HDisplay; int Remainder = par->lcd_width % HDisplay; if ((!Remainder && ((nStretch > 2))) || - (((HDisplay * 16) / par->lcd_width) < 7)) { - static const char StretchLoops[] = {10, 12, 13, 15, 16}; + (((HDisplay * 16) / par->lcd_width) < 7)) { + static const char StretchLoops[] = { 10, 12, 13, 15, 16 }; int horz_stretch_loop = -1, BestRemainder; int Numerator = HDisplay, Denominator = par->lcd_width; int Index = 5; @@ -1098,12 +1121,12 @@ static int aty_var_to_crtc(const struct fb_info *info, (((vdisplay * (VERT_STRETCH_RATIO0 + 1)) / par->lcd_height) & VERT_STRETCH_RATIO0)); if (!M64_HAS(LT_LCD_REGS) && - xres <= (M64_HAS(MOBIL_BUS)?1024:800)) + xres <= (M64_HAS(MOBIL_BUS) ? 1024 : 800)) crtc->ext_vert_stretch |= VERT_STRETCH_MODE; } else { /* - * Don't use vertical blending if the mode is too wide or not - * vertically stretched. + * Don't use vertical blending if the mode is too wide + * or not vertically stretched. */ crtc->vert_stretching = 0; } @@ -1125,11 +1148,11 @@ static int aty_var_to_crtc(const struct fb_info *info, return 0; } -static int aty_crtc_to_var(const struct crtc *crtc, struct fb_var_screeninfo *var) +static int aty_crtc_to_var(const struct crtc *crtc, + struct fb_var_screeninfo *var) { u32 xres, yres, bpp, left, right, upper, lower, hslen, vslen, sync; - u32 h_total, h_disp, h_sync_strt, h_sync_dly, h_sync_wid, - h_sync_pol; + u32 h_total, h_disp, h_sync_strt, h_sync_dly, h_sync_wid, h_sync_pol; u32 v_total, v_disp, v_sync_strt, v_sync_wid, v_sync_pol, c_sync; u32 pix_width; u32 double_scan, interlace; @@ -1161,8 +1184,8 @@ static int aty_crtc_to_var(const struct crtc *crtc, struct fb_var_screeninfo *va lower = v_sync_strt - v_disp; vslen = v_sync_wid; sync = (h_sync_pol ? 0 : FB_SYNC_HOR_HIGH_ACT) | - (v_sync_pol ? 0 : FB_SYNC_VERT_HIGH_ACT) | - (c_sync ? FB_SYNC_COMP_HIGH_ACT : 0); + (v_sync_pol ? 0 : FB_SYNC_VERT_HIGH_ACT) | + (c_sync ? FB_SYNC_COMP_HIGH_ACT : 0); switch (pix_width) { #if 0 @@ -1252,20 +1275,21 @@ static int aty_crtc_to_var(const struct crtc *crtc, struct fb_var_screeninfo *va var->vsync_len = vslen; var->sync = sync; var->vmode = FB_VMODE_NONINTERLACED; - /* In double scan mode, the vertical parameters are doubled, so we need to - half them to get the right values. - In interlaced mode the values are already correct, so no correction is - necessary. + /* + * In double scan mode, the vertical parameters are doubled, + * so we need to halve them to get the right values. + * In interlaced mode the values are already correct, + * so no correction is necessary. */ if (interlace) var->vmode = FB_VMODE_INTERLACED; if (double_scan) { var->vmode = FB_VMODE_DOUBLE; - var->yres>>=1; - var->upper_margin>>=1; - var->lower_margin>>=1; - var->vsync_len>>=1; + var->yres >>= 1; + var->upper_margin >>= 1; + var->lower_margin >>= 1; + var->vsync_len >>= 1; } return 0; @@ -1286,7 +1310,8 @@ static int atyfb_set_par(struct fb_info *info) if (par->asleep) return 0; - if ((err = aty_var_to_crtc(info, var, &par->crtc))) + err = aty_var_to_crtc(info, var, &par->crtc); + if (err) return err; pixclock = atyfb_get_pixclock(var, par); @@ -1295,7 +1320,9 @@ static int atyfb_set_par(struct fb_info *info) PRINTKE("Invalid pixclock\n"); return -EINVAL; } else { - if((err = par->pll_ops->var_to_pll(info, pixclock, var->bits_per_pixel, &par->pll))) + err = par->pll_ops->var_to_pll(info, pixclock, + var->bits_per_pixel, &par->pll); + if (err) return err; } @@ -1313,22 +1340,23 @@ static int atyfb_set_par(struct fb_info *info) wait_for_idle(par); aty_set_crtc(par, &par->crtc); - par->dac_ops->set_dac(info, &par->pll, var->bits_per_pixel, par->accel_flags); + par->dac_ops->set_dac(info, &par->pll, + var->bits_per_pixel, par->accel_flags); par->pll_ops->set_pll(info, &par->pll); #ifdef DEBUG - if(par->pll_ops && par->pll_ops->pll_to_var) - pixclock_in_ps = par->pll_ops->pll_to_var(info, &(par->pll)); + if (par->pll_ops && par->pll_ops->pll_to_var) + pixclock_in_ps = par->pll_ops->pll_to_var(info, &par->pll); else pixclock_in_ps = 0; - if(0 == pixclock_in_ps) { + if (0 == pixclock_in_ps) { PRINTKE("ALERT ops->pll_to_var get 0\n"); pixclock_in_ps = pixclock; } memset(&debug, 0, sizeof(debug)); - if(!aty_crtc_to_var(&(par->crtc), &debug)) { + if (!aty_crtc_to_var(&par->crtc, &debug)) { u32 hSync, vRefresh; u32 h_disp, h_sync_strt, h_sync_end, h_total; u32 v_disp, v_sync_strt, v_sync_end, v_total; @@ -1344,16 +1372,20 @@ static int atyfb_set_par(struct fb_info *info) hSync = 1000000000 / (pixclock_in_ps * h_total); vRefresh = (hSync * 1000) / v_total; - if (par->crtc.gen_cntl & CRTC_INTERLACE_EN) - vRefresh *= 2; - if (par->crtc.gen_cntl & CRTC_DBL_SCAN_EN) - vRefresh /= 2; + if (par->crtc.gen_cntl & CRTC_INTERLACE_EN) + vRefresh *= 2; + if (par->crtc.gen_cntl & CRTC_DBL_SCAN_EN) + vRefresh /= 2; DPRINTK("atyfb_set_par\n"); - DPRINTK(" Set Visible Mode to %ix%i-%i\n", var->xres, var->yres, var->bits_per_pixel); - DPRINTK(" Virtual resolution %ix%i, pixclock_in_ps %i (calculated %i)\n", - var->xres_virtual, var->yres_virtual, pixclock, pixclock_in_ps); - DPRINTK(" Dot clock: %i MHz\n", 1000000 / pixclock_in_ps); + DPRINTK(" Set Visible Mode to %ix%i-%i\n", + var->xres, var->yres, var->bits_per_pixel); + DPRINTK(" Virtual resolution %ix%i, " + "pixclock_in_ps %i (calculated %i)\n", + var->xres_virtual, var->yres_virtual, + pixclock, pixclock_in_ps); + DPRINTK(" Dot clock: %i MHz\n", + 1000000 / pixclock_in_ps); DPRINTK(" Horizontal sync: %i kHz\n", hSync); DPRINTK(" Vertical refresh: %i Hz\n", vRefresh); DPRINTK(" x style: %i.%03i %i %i %i %i %i %i %i %i\n", @@ -1448,7 +1480,8 @@ static int atyfb_set_par(struct fb_info *info) base = 0x2000; printk("debug atyfb: Mach64 non-shadow register values:"); for (i = 0; i < 256; i = i+4) { - if(i%16 == 0) printk("\ndebug atyfb: 0x%04X: ", base + i); + if (i % 16 == 0) + printk("\ndebug atyfb: 0x%04X: ", base + i); printk(" %08X", aty_ld_le32(i, par)); } printk("\n\n"); @@ -1458,8 +1491,10 @@ static int atyfb_set_par(struct fb_info *info) base = 0x00; printk("debug atyfb: Mach64 PLL register values:"); for (i = 0; i < 64; i++) { - if(i%16 == 0) printk("\ndebug atyfb: 0x%02X: ", base + i); - if(i%4 == 0) printk(" "); + if (i % 16 == 0) + printk("\ndebug atyfb: 0x%02X: ", base + i); + if (i % 4 == 0) + printk(" "); printk("%02X", aty_ld_pll_ct(i, par)); } printk("\n\n"); @@ -1470,19 +1505,21 @@ static int atyfb_set_par(struct fb_info *info) /* LCD registers */ base = 0x00; printk("debug atyfb: LCD register values:"); - if(M64_HAS(LT_LCD_REGS)) { - for(i = 0; i <= POWER_MANAGEMENT; i++) { - if(i == EXT_VERT_STRETCH) - continue; - printk("\ndebug atyfb: 0x%04X: ", lt_lcd_regs[i]); - printk(" %08X", aty_ld_lcd(i, par)); - } - + if (M64_HAS(LT_LCD_REGS)) { + for (i = 0; i <= POWER_MANAGEMENT; i++) { + if (i == EXT_VERT_STRETCH) + continue; + printk("\ndebug atyfb: 0x%04X: ", + lt_lcd_regs[i]); + printk(" %08X", aty_ld_lcd(i, par)); + } } else { - for (i = 0; i < 64; i++) { - if(i%4 == 0) printk("\ndebug atyfb: 0x%02X: ", base + i); - printk(" %08X", aty_ld_lcd(i, par)); - } + for (i = 0; i < 64; i++) { + if (i % 4 == 0) + printk("\ndebug atyfb: 0x%02X: ", + base + i); + printk(" %08X", aty_ld_lcd(i, par)); + } } printk("\n\n"); } @@ -1500,9 +1537,10 @@ static int atyfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) union aty_pll pll; u32 pixclock; - memcpy(&pll, &(par->pll), sizeof(pll)); + memcpy(&pll, &par->pll, sizeof(pll)); - if((err = aty_var_to_crtc(info, var, &crtc))) + err = aty_var_to_crtc(info, var, &crtc); + if (err) return err; pixclock = atyfb_get_pixclock(var, par); @@ -1512,7 +1550,9 @@ static int atyfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) PRINTKE("Invalid pixclock\n"); return -EINVAL; } else { - if((err = par->pll_ops->var_to_pll(info, pixclock, var->bits_per_pixel, &pll))) + err = par->pll_ops->var_to_pll(info, pixclock, + var->bits_per_pixel, &pll); + if (err) return err; } @@ -1539,9 +1579,9 @@ static void set_off_pitch(struct atyfb_par *par, const struct fb_info *info) } - /* - * Open/Release the frame buffer device - */ +/* + * Open/Release the frame buffer device + */ static int atyfb_open(struct fb_info *info, int user) { @@ -1553,7 +1593,7 @@ static int atyfb_open(struct fb_info *info, int user) par->mmaped = 0; #endif } - return (0); + return 0; } static irqreturn_t aty_irq(int irq, void *dev_id) @@ -1568,7 +1608,8 @@ static irqreturn_t aty_irq(int irq, void *dev_id) if (int_cntl & CRTC_VBLANK_INT) { /* clear interrupt */ - aty_st_le32(CRTC_INT_CNTL, (int_cntl & CRTC_INT_EN_MASK) | CRTC_VBLANK_INT_AK, par); + aty_st_le32(CRTC_INT_CNTL, (int_cntl & CRTC_INT_EN_MASK) | + CRTC_VBLANK_INT_AK, par); par->vblank.count++; if (par->vblank.pan_display) { par->vblank.pan_display = 0; @@ -1603,9 +1644,11 @@ static int aty_enable_irq(struct atyfb_par *par, int reenable) spin_lock_irq(&par->int_lock); int_cntl = aty_ld_le32(CRTC_INT_CNTL, par) & CRTC_INT_EN_MASK; if (!(int_cntl & CRTC_VBLANK_INT_EN)) { - printk("atyfb: someone disabled IRQ [%08x]\n", int_cntl); + printk("atyfb: someone disabled IRQ [%08x]\n", + int_cntl); /* re-enable interrupt */ - aty_st_le32(CRTC_INT_CNTL, int_cntl | CRTC_VBLANK_INT_EN, par ); + aty_st_le32(CRTC_INT_CNTL, int_cntl | + CRTC_VBLANK_INT_EN, par); } spin_unlock_irq(&par->int_lock); } @@ -1625,7 +1668,7 @@ static int aty_disable_irq(struct atyfb_par *par) spin_lock_irq(&par->int_lock); int_cntl = aty_ld_le32(CRTC_INT_CNTL, par) & CRTC_INT_EN_MASK; /* disable interrupt */ - aty_st_le32(CRTC_INT_CNTL, int_cntl & ~CRTC_VBLANK_INT_EN, par ); + aty_st_le32(CRTC_INT_CNTL, int_cntl & ~CRTC_VBLANK_INT_EN, par); spin_unlock_irq(&par->int_lock); free_irq(par->irq, par); } @@ -1636,50 +1679,62 @@ static int aty_disable_irq(struct atyfb_par *par) static int atyfb_release(struct fb_info *info, int user) { struct atyfb_par *par = (struct atyfb_par *) info->par; - if (user) { - par->open--; - mdelay(1); - wait_for_idle(par); - if (!par->open) { #ifdef __sparc__ - int was_mmaped = par->mmaped; + int was_mmaped; +#endif - par->mmaped = 0; + if (!user) + return 0; - if (was_mmaped) { - struct fb_var_screeninfo var; + par->open--; + mdelay(1); + wait_for_idle(par); - /* Now reset the default display config, we have no - * idea what the program(s) which mmap'd the chip did - * to the configuration, nor whether it restored it - * correctly. - */ - var = default_var; - if (noaccel) - var.accel_flags &= ~FB_ACCELF_TEXT; - else - var.accel_flags |= FB_ACCELF_TEXT; - if (var.yres == var.yres_virtual) { - u32 videoram = (info->fix.smem_len - (PAGE_SIZE << 2)); - var.yres_virtual = ((videoram * 8) / var.bits_per_pixel) / var.xres_virtual; - if (var.yres_virtual < var.yres) - var.yres_virtual = var.yres; - } - } -#endif - aty_disable_irq(par); + if (par->open) + return 0; + +#ifdef __sparc__ + was_mmaped = par->mmaped; + + par->mmaped = 0; + + if (was_mmaped) { + struct fb_var_screeninfo var; + + /* + * Now reset the default display config, we have + * no idea what the program(s) which mmap'd the + * chip did to the configuration, nor whether it + * restored it correctly. + */ + var = default_var; + if (noaccel) + var.accel_flags &= ~FB_ACCELF_TEXT; + else + var.accel_flags |= FB_ACCELF_TEXT; + if (var.yres == var.yres_virtual) { + u32 videoram = (info->fix.smem_len - (PAGE_SIZE << 2)); + var.yres_virtual = + ((videoram * 8) / var.bits_per_pixel) / + var.xres_virtual; + if (var.yres_virtual < var.yres) + var.yres_virtual = var.yres; } } - return (0); +#endif + aty_disable_irq(par); + + return 0; } - /* - * Pan or Wrap the Display - * - * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag - */ +/* + * Pan or Wrap the Display + * + * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag + */ -static int atyfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) +static int atyfb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info) { struct atyfb_par *par = (struct atyfb_par *) info->par; u32 xres, yres, xoffset, yoffset; @@ -1690,7 +1745,8 @@ static int atyfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info yres >>= 1; xoffset = (var->xoffset + 7) & ~7; yoffset = var->yoffset; - if (xoffset + xres > par->crtc.vxres || yoffset + yres > par->crtc.vyres) + if (xoffset + xres > par->crtc.vxres || + yoffset + yres > par->crtc.vyres) return -EINVAL; info->var.xoffset = xoffset; info->var.yoffset = yoffset; @@ -1727,10 +1783,10 @@ static int aty_waitforvblank(struct atyfb_par *par, u32 crtc) return ret; count = vbl->count; - ret = wait_event_interruptible_timeout(vbl->wait, count != vbl->count, HZ/10); - if (ret < 0) { + ret = wait_event_interruptible_timeout(vbl->wait, + count != vbl->count, HZ/10); + if (ret < 0) return ret; - } if (ret == 0) { aty_enable_irq(par, 1); return -ETIMEDOUT; @@ -1784,7 +1840,8 @@ static int atyfb_ioctl(struct fb_info *info, u_int cmd, u_long arg) fbtyp.fb_depth = info->var.bits_per_pixel; fbtyp.fb_cmsize = info->cmap.len; fbtyp.fb_size = info->fix.smem_len; - if (copy_to_user((struct fbtype __user *) arg, &fbtyp, sizeof(fbtyp))) + if (copy_to_user((struct fbtype __user *) arg, &fbtyp, + sizeof(fbtyp))) return -EFAULT; break; #endif /* __sparc__ */ @@ -1804,7 +1861,7 @@ static int atyfb_ioctl(struct fb_info *info, u_int cmd, u_long arg) case ATYIO_CLKR: if (M64_HAS(INTEGRATED)) { struct atyclk clk; - union aty_pll *pll = &(par->pll); + union aty_pll *pll = &par->pll; u32 dsp_config = pll->ct.dsp_config; u32 dsp_on_off = pll->ct.dsp_on_off; clk.ref_clk_per = par->ref_clk_per; @@ -1829,8 +1886,9 @@ static int atyfb_ioctl(struct fb_info *info, u_int cmd, u_long arg) case ATYIO_CLKW: if (M64_HAS(INTEGRATED)) { struct atyclk clk; - union aty_pll *pll = &(par->pll); - if (copy_from_user(&clk, (struct atyclk __user *) arg, sizeof(clk))) + union aty_pll *pll = &par->pll; + if (copy_from_user(&clk, (struct atyclk __user *) arg, + sizeof(clk))) return -EFAULT; par->ref_clk_per = clk.ref_clk_per; pll->ct.pll_ref_div = clk.pll_ref_div; @@ -1841,8 +1899,10 @@ static int atyfb_ioctl(struct fb_info *info, u_int cmd, u_long arg) pll->ct.vclk_fb_div = clk.vclk_fb_div; pll->ct.vclk_post_div_real = clk.vclk_post_div; pll->ct.dsp_config = (clk.dsp_xclks_per_row & 0x3fff) | - ((clk.dsp_loop_latency & 0xf)<<16)| ((clk.dsp_precision & 7)<<20); - pll->ct.dsp_on_off = (clk.dsp_off & 0x7ff) | ((clk.dsp_on & 0x7ff)<<16); + ((clk.dsp_loop_latency & 0xf) << 16) | + ((clk.dsp_precision & 7) << 20); + pll->ct.dsp_on_off = (clk.dsp_off & 0x7ff) | + ((clk.dsp_on & 0x7ff) << 16); /*aty_calc_pll_ct(info, &pll->ct);*/ aty_set_pll_ct(info, pll); } else @@ -1913,8 +1973,7 @@ static int atyfb_mmap(struct fb_info *info, struct vm_area_struct *vma) continue; map_size = par->mmap_map[i].size - (offset - start); - map_offset = - par->mmap_map[i].poff + (offset - start); + map_offset = par->mmap_map[i].poff + (offset - start); break; } if (!map_size) { @@ -1924,8 +1983,7 @@ static int atyfb_mmap(struct fb_info *info, struct vm_area_struct *vma) if (page + map_size > size) map_size = size - page; - pgprot_val(vma->vm_page_prot) &= - ~(par->mmap_map[i].prot_mask); + pgprot_val(vma->vm_page_prot) &= ~(par->mmap_map[i].prot_mask); pgprot_val(vma->vm_page_prot) |= par->mmap_map[i].prot_flag; if (remap_pfn_range(vma, vma->vm_start + page, @@ -2029,7 +2087,8 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) par->asleep = 1; par->lock_blank = 1; - /* Because we may change PCI D state ourselves, we need to + /* + * Because we may change PCI D state ourselves, we need to * first save the config space content so the core can * restore it properly on resume. */ @@ -2080,7 +2139,8 @@ static int atyfb_pci_resume(struct pci_dev *pdev) acquire_console_sem(); - /* PCI state will have been restored by the core, so + /* + * PCI state will have been restored by the core, so * we should be in D0 now with our config space fully * restored */ @@ -2192,8 +2252,8 @@ static void aty_bl_init(struct atyfb_par *par) info->bl_dev = bd; fb_bl_default_curve(info, 0, - 0x3F * FB_BACKLIGHT_MAX / MAX_LEVEL, - 0xFF * FB_BACKLIGHT_MAX / MAX_LEVEL); + 0x3F * FB_BACKLIGHT_MAX / MAX_LEVEL, + 0xFF * FB_BACKLIGHT_MAX / MAX_LEVEL); bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1; bd->props.brightness = bd->props.max_brightness; @@ -2236,16 +2296,16 @@ static void __devinit aty_calc_mem_refresh(struct atyfb_par *par, int xclk) size = ARRAY_SIZE(ragepro_tbl); } - for (i=0; i < size; i++) { + for (i = 0; i < size; i++) { if (xclk < refresh_tbl[i]) - break; + break; } par->mem_refresh_rate = i; } - /* - * Initialisation - */ +/* + * Initialisation + */ static struct fb_info *fb_list = NULL; @@ -2375,8 +2435,10 @@ static int __devinit aty_init(struct fb_info *info) } #endif #ifdef CONFIG_PPC_PMAC - /* The Apple iBook1 uses non-standard memory frequencies. We detect it - * and set the frequency manually. */ + /* + * The Apple iBook1 uses non-standard memory frequencies. + * We detect it and set the frequency manually. + */ if (machine_is_compatible("PowerBook2,1")) { par->pll_limits.mclk = 70; par->pll_limits.xclk = 53; @@ -2421,13 +2483,14 @@ static int __devinit aty_init(struct fb_info *info) /* save previous video mode */ aty_get_crtc(par, &par->saved_crtc); - if(par->pll_ops->get_pll) + if (par->pll_ops->get_pll) par->pll_ops->get_pll(info, &par->saved_pll); par->mem_cntl = aty_ld_le32(MEM_CNTL, par); gtb_memsize = M64_HAS(GTB_DSP); if (gtb_memsize) - switch (par->mem_cntl & 0xF) { /* 0xF used instead of MEM_SIZE_ALIAS */ + /* 0xF used instead of MEM_SIZE_ALIAS */ + switch (par->mem_cntl & 0xF) { case MEM_SIZE_512K: info->fix.smem_len = 0x80000; break; @@ -2496,8 +2559,8 @@ static int __devinit aty_init(struct fb_info *info) } /* - * Reg Block 0 (CT-compatible block) is at mmio_start - * Reg Block 1 (multimedia extensions) is at mmio_start - 0x400 + * Reg Block 0 (CT-compatible block) is at mmio_start + * Reg Block 1 (multimedia extensions) is at mmio_start - 0x400 */ if (M64_HAS(GX)) { info->fix.mmio_len = 0x400; @@ -2516,84 +2579,98 @@ static int __devinit aty_init(struct fb_info *info) } PRINTKI("%d%c %s, %s MHz XTAL, %d MHz PLL, %d Mhz MCLK, %d MHz XCLK\n", - info->fix.smem_len == 0x80000 ? 512 : (info->fix.smem_len >> 20), - info->fix.smem_len == 0x80000 ? 'K' : 'M', ramname, xtal, par->pll_limits.pll_max, - par->pll_limits.mclk, par->pll_limits.xclk); + info->fix.smem_len == 0x80000 ? 512 : (info->fix.smem_len>>20), + info->fix.smem_len == 0x80000 ? 'K' : 'M', ramname, xtal, + par->pll_limits.pll_max, par->pll_limits.mclk, + par->pll_limits.xclk); #if defined(DEBUG) && defined(CONFIG_FB_ATY_CT) if (M64_HAS(INTEGRATED)) { int i; - printk("debug atyfb: BUS_CNTL DAC_CNTL MEM_CNTL EXT_MEM_CNTL CRTC_GEN_CNTL " - "DSP_CONFIG DSP_ON_OFF CLOCK_CNTL\n" - "debug atyfb: %08x %08x %08x %08x %08x %08x %08x %08x\n" + printk("debug atyfb: BUS_CNTL DAC_CNTL MEM_CNTL " + "EXT_MEM_CNTL CRTC_GEN_CNTL DSP_CONFIG " + "DSP_ON_OFF CLOCK_CNTL\n" + "debug atyfb: %08x %08x %08x " + "%08x %08x %08x " + "%08x %08x\n" "debug atyfb: PLL", - aty_ld_le32(BUS_CNTL, par), aty_ld_le32(DAC_CNTL, par), - aty_ld_le32(MEM_CNTL, par), aty_ld_le32(EXT_MEM_CNTL, par), - aty_ld_le32(CRTC_GEN_CNTL, par), aty_ld_le32(DSP_CONFIG, par), - aty_ld_le32(DSP_ON_OFF, par), aty_ld_le32(CLOCK_CNTL, par)); + aty_ld_le32(BUS_CNTL, par), + aty_ld_le32(DAC_CNTL, par), + aty_ld_le32(MEM_CNTL, par), + aty_ld_le32(EXT_MEM_CNTL, par), + aty_ld_le32(CRTC_GEN_CNTL, par), + aty_ld_le32(DSP_CONFIG, par), + aty_ld_le32(DSP_ON_OFF, par), + aty_ld_le32(CLOCK_CNTL, par)); for (i = 0; i < 40; i++) printk(" %02x", aty_ld_pll_ct(i, par)); printk("\n"); } #endif - if(par->pll_ops->init_pll) + if (par->pll_ops->init_pll) par->pll_ops->init_pll(info, &par->pll); if (par->pll_ops->resume_pll) par->pll_ops->resume_pll(info, &par->pll); /* - * Last page of 8 MB (4 MB on ISA) aperture is MMIO, - * unless the auxiliary register aperture is used. + * Last page of 8 MB (4 MB on ISA) aperture is MMIO, + * unless the auxiliary register aperture is used. */ - if (!par->aux_start && - (info->fix.smem_len == 0x800000 || (par->bus_type == ISA && info->fix.smem_len == 0x400000))) + (info->fix.smem_len == 0x800000 || + (par->bus_type == ISA && info->fix.smem_len == 0x400000))) info->fix.smem_len -= GUI_RESERVE; /* - * Disable register access through the linear aperture - * if the auxiliary aperture is used so we can access - * the full 8 MB of video RAM on 8 MB boards. + * Disable register access through the linear aperture + * if the auxiliary aperture is used so we can access + * the full 8 MB of video RAM on 8 MB boards. */ if (par->aux_start) - aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par); + aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | + BUS_APER_REG_DIS, par); #ifdef CONFIG_MTRR par->mtrr_aper = -1; par->mtrr_reg = -1; if (!nomtrr) { /* Cover the whole resource. */ - par->mtrr_aper = mtrr_add(par->res_start, par->res_size, MTRR_TYPE_WRCOMB, 1); - if (par->mtrr_aper >= 0 && !par->aux_start) { + par->mtrr_aper = mtrr_add(par->res_start, par->res_size, + MTRR_TYPE_WRCOMB, 1); + if (par->mtrr_aper >= 0 && !par->aux_start) { /* Make a hole for mmio. */ - par->mtrr_reg = mtrr_add(par->res_start + 0x800000 - GUI_RESERVE, - GUI_RESERVE, MTRR_TYPE_UNCACHABLE, 1); + par->mtrr_reg = mtrr_add(par->res_start + 0x800000 - + GUI_RESERVE, GUI_RESERVE, + MTRR_TYPE_UNCACHABLE, 1); if (par->mtrr_reg < 0) { mtrr_del(par->mtrr_aper, 0, 0); par->mtrr_aper = -1; } - } + } } #endif info->fbops = &atyfb_ops; info->pseudo_palette = par->pseudo_palette; info->flags = FBINFO_DEFAULT | - FBINFO_HWACCEL_IMAGEBLIT | - FBINFO_HWACCEL_FILLRECT | - FBINFO_HWACCEL_COPYAREA | - FBINFO_HWACCEL_YPAN; + FBINFO_HWACCEL_IMAGEBLIT | + FBINFO_HWACCEL_FILLRECT | + FBINFO_HWACCEL_COPYAREA | + FBINFO_HWACCEL_YPAN; #ifdef CONFIG_PMAC_BACKLIGHT if (M64_HAS(G3_PB_1_1) && machine_is_compatible("PowerBook1,1")) { - /* these bits let the 101 powerbook wake up from sleep -- paulus */ - aty_st_lcd(POWER_MANAGEMENT, aty_ld_lcd(POWER_MANAGEMENT, par) - | (USE_F32KHZ | TRISTATE_MEM_EN), par); + /* + * these bits let the 101 powerbook + * wake up from sleep -- paulus + */ + aty_st_lcd(POWER_MANAGEMENT, aty_ld_lcd(POWER_MANAGEMENT, par) | + USE_F32KHZ | TRISTATE_MEM_EN, par); } else #endif if (M64_HAS(MOBIL_BUS) && backlight) { #ifdef CONFIG_FB_ATY_BACKLIGHT - aty_bl_init (par); + aty_bl_init(par); #endif } @@ -2601,8 +2678,8 @@ static int __devinit aty_init(struct fb_info *info) #ifdef CONFIG_PPC if (machine_is(powermac)) { /* - * FIXME: The NVRAM stuff should be put in a Mac-specific file, as it - * applies to all Mac video cards + * FIXME: The NVRAM stuff should be put in a Mac-specific file, + * as it applies to all Mac video cards */ if (mode) { if (mac_find_mode(&var, info, mode, 8)) @@ -2615,8 +2692,7 @@ static int __devinit aty_init(struct fb_info *info) default_vmode = VMODE_1024_768_60; else if (machine_is_compatible("iMac")) default_vmode = VMODE_1024_768_75; - else if (machine_is_compatible - ("PowerBook2,1")) + else if (machine_is_compatible("PowerBook2,1")) /* iBook with 800x600 LCD */ default_vmode = VMODE_800_600_60; else @@ -2630,7 +2706,7 @@ static int __devinit aty_init(struct fb_info *info) if (default_cmode < CMODE_8 || default_cmode > CMODE_32) default_cmode = CMODE_8; if (!mac_vmode_to_var(default_vmode, default_cmode, - &var)) + &var)) has_var = 1; } } @@ -2702,12 +2778,12 @@ aty_init_exit: #ifdef CONFIG_MTRR if (par->mtrr_reg >= 0) { - mtrr_del(par->mtrr_reg, 0, 0); - par->mtrr_reg = -1; + mtrr_del(par->mtrr_reg, 0, 0); + par->mtrr_reg = -1; } if (par->mtrr_aper >= 0) { - mtrr_del(par->mtrr_aper, 0, 0); - par->mtrr_aper = -1; + mtrr_del(par->mtrr_aper, 0, 0); + par->mtrr_aper = -1; } #endif return ret; @@ -2735,18 +2811,18 @@ static int __devinit store_video_par(char *video_str, unsigned char m64_num) phys_size[m64_num] = size; phys_guiregbase[m64_num] = guiregbase; PRINTKI("stored them all: $%08lX $%08lX $%08lX \n", vmembase, size, - guiregbase); + guiregbase); return 0; - mach64_invalid: + mach64_invalid: phys_vmembase[m64_num] = 0; return -1; } #endif /* CONFIG_ATARI */ - /* - * Blank the display. - */ +/* + * Blank the display. + */ static int atyfb_blank(int blank, struct fb_info *info) { @@ -2768,20 +2844,20 @@ static int atyfb_blank(int blank, struct fb_info *info) gen_cntl = aty_ld_le32(CRTC_GEN_CNTL, par); gen_cntl &= ~0x400004c; switch (blank) { - case FB_BLANK_UNBLANK: - break; - case FB_BLANK_NORMAL: - gen_cntl |= 0x4000040; - break; - case FB_BLANK_VSYNC_SUSPEND: - gen_cntl |= 0x4000048; - break; - case FB_BLANK_HSYNC_SUSPEND: - gen_cntl |= 0x4000044; - break; - case FB_BLANK_POWERDOWN: - gen_cntl |= 0x400004c; - break; + case FB_BLANK_UNBLANK: + break; + case FB_BLANK_NORMAL: + gen_cntl |= 0x4000040; + break; + case FB_BLANK_VSYNC_SUSPEND: + gen_cntl |= 0x4000048; + break; + case FB_BLANK_HSYNC_SUSPEND: + gen_cntl |= 0x4000044; + break; + case FB_BLANK_POWERDOWN: + gen_cntl |= 0x400004c; + break; } aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par); @@ -2806,15 +2882,15 @@ static void aty_st_pal(u_int regno, u_int red, u_int green, u_int blue, aty_st_8(DAC_DATA, blue, par); } - /* - * Set a single color register. The values supplied are already - * rounded down to the hardware's capabilities (according to the - * entries in the var structure). Return != 0 for invalid regno. - * !! 4 & 8 = PSEUDO, > 8 = DIRECTCOLOR - */ +/* + * Set a single color register. The values supplied are already + * rounded down to the hardware's capabilities (according to the + * entries in the var structure). Return != 0 for invalid regno. + * !! 4 & 8 = PSEUDO, > 8 = DIRECTCOLOR + */ static int atyfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, - u_int transp, struct fb_info *info) + u_int transp, struct fb_info *info) { struct atyfb_par *par = (struct atyfb_par *) info->par; int i, depth; @@ -2868,16 +2944,15 @@ static int atyfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, if (depth == 16) { if (regno < 32) aty_st_pal(regno << 3, red, - par->palette[regno<<1].green, + par->palette[regno << 1].green, blue, par); - red = par->palette[regno>>1].red; - blue = par->palette[regno>>1].blue; + red = par->palette[regno >> 1].red; + blue = par->palette[regno >> 1].blue; regno <<= 2; } else if (depth == 15) { regno <<= 3; - for(i = 0; i < 8; i++) { - aty_st_pal(regno + i, red, green, blue, par); - } + for (i = 0; i < 8; i++) + aty_st_pal(regno + i, red, green, blue, par); } } aty_st_pal(regno, red, green, blue, par); @@ -2890,7 +2965,8 @@ static int atyfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, #ifdef __sparc__ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev, - struct fb_info *info, unsigned long addr) + struct fb_info *info, + unsigned long addr) { struct atyfb_par *par = info->par; struct device_node *dp; @@ -2978,7 +3054,8 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev, j++; } - if((ret = correct_chipset(par))) + ret = correct_chipset(par); + if (ret) return ret; if (IS_XL(pdev->device)) { @@ -3108,28 +3185,28 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) u32 driv_inf_tab, sig; u16 lcd_ofs; - /* To support an LCD panel, we should know it's dimensions and + /* + * To support an LCD panel, we should know it's dimensions and * it's desired pixel clock. * There are two ways to do it: * - Check the startup video mode and calculate the panel * size from it. This is unreliable. * - Read it from the driver information table in the video BIOS. - */ + */ /* Address of driver information table is at offset 0x78. */ driv_inf_tab = bios_base + *((u16 *)(bios_base+0x78)); /* Check for the driver information table signature. */ - sig = (*(u32 *)driv_inf_tab); + sig = *(u32 *)driv_inf_tab; if ((sig == 0x54504c24) || /* Rage LT pro */ - (sig == 0x544d5224) || /* Rage mobility */ - (sig == 0x54435824) || /* Rage XC */ - (sig == 0x544c5824)) { /* Rage XL */ + (sig == 0x544d5224) || /* Rage mobility */ + (sig == 0x54435824) || /* Rage XC */ + (sig == 0x544c5824)) { /* Rage XL */ PRINTKI("BIOS contains driver information table.\n"); - lcd_ofs = (*(u16 *)(driv_inf_tab + 10)); + lcd_ofs = *(u16 *)(driv_inf_tab + 10); par->lcd_table = 0; - if (lcd_ofs != 0) { + if (lcd_ofs != 0) par->lcd_table = bios_base + lcd_ofs; - } } if (par->lcd_table != 0) { @@ -3144,14 +3221,16 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) u16 width, height, panel_type, refresh_rates; u16 *lcdmodeptr; u32 format; - u8 lcd_refresh_rates[16] = {50,56,60,67,70,72,75,76,85,90,100,120,140,150,160,200}; - /* The most important information is the panel size at + u8 lcd_refresh_rates[16] = { 50, 56, 60, 67, 70, 72, 75, 76, 85, + 90, 100, 120, 140, 150, 160, 200 }; + /* + * The most important information is the panel size at * offset 25 and 27, but there's some other nice information * which we print to the screen. */ id = *(u8 *)par->lcd_table; - strncpy(model,(char *)par->lcd_table+1,24); - model[23]=0; + strncpy(model, (char *)par->lcd_table+1, 24); + model[23] = 0; width = par->lcd_width = *(u16 *)(par->lcd_table+25); height = par->lcd_height = *(u16 *)(par->lcd_table+27); @@ -3164,7 +3243,7 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) txtdual = "dual (split) "; else txtdual = ""; - tech = (panel_type>>2) & 63; + tech = (panel_type >> 2) & 63; switch (tech) { case 0: txtmonitor = "passive matrix"; @@ -3224,22 +3303,24 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) } } PRINTKI("%s%s %s monitor detected: %s\n", - txtdual ,txtcolour, txtmonitor, model); + txtdual, txtcolour, txtmonitor, model); PRINTKI(" id=%d, %dx%d pixels, %s\n", id, width, height, txtformat); refresh_rates_buf[0] = 0; refresh_rates = *(u16 *)(par->lcd_table+62); m = 1; f = 0; - for (i=0;i<16;i++) { + for (i = 0; i < 16; i++) { if (refresh_rates & m) { if (f == 0) { - sprintf(strbuf, "%d", lcd_refresh_rates[i]); + sprintf(strbuf, "%d", + lcd_refresh_rates[i]); f++; } else { - sprintf(strbuf, ",%d", lcd_refresh_rates[i]); + sprintf(strbuf, ",%d", + lcd_refresh_rates[i]); } - strcat(refresh_rates_buf,strbuf); + strcat(refresh_rates_buf, strbuf); } m = m << 1; } @@ -3247,7 +3328,8 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) PRINTKI(" supports refresh rates [%s], default %d Hz\n", refresh_rates_buf, lcd_refresh_rates[default_refresh_rate]); par->lcd_refreshrate = lcd_refresh_rates[default_refresh_rate]; - /* We now need to determine the crtc parameters for the + /* + * We now need to determine the crtc parameters for the * LCD monitor. This is tricky, because they are not stored * individually in the BIOS. Instead, the BIOS contains a * table of display modes that work for this monitor. @@ -3382,7 +3464,9 @@ static int __devinit init_from_bios(struct atyfb_par *par) } #endif /* __i386__ */ -static int __devinit atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *info, unsigned long addr) +static int __devinit atyfb_setup_generic(struct pci_dev *pdev, + struct fb_info *info, + unsigned long addr) { struct atyfb_par *par = info->par; u16 tmp; @@ -3429,10 +3513,12 @@ static int __devinit atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *i goto atyfb_setup_generic_fail; } - if((ret = correct_chipset(par))) + ret = correct_chipset(par); + if (ret) goto atyfb_setup_generic_fail; #ifdef __i386__ - if((ret = init_from_bios(par))) + ret = init_from_bios(par); + if (ret) goto atyfb_setup_generic_fail; #endif if (!(aty_ld_le32(CRTC_GEN_CNTL, par) & CRTC_EXT_DISP_EN)) @@ -3457,7 +3543,8 @@ atyfb_setup_generic_fail: #endif /* !__sparc__ */ -static int __devinit atyfb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +static int __devinit atyfb_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { unsigned long addr, res_start, res_size; struct fb_info *info; @@ -3482,10 +3569,10 @@ static int __devinit atyfb_pci_probe(struct pci_dev *pdev, const struct pci_devi /* Reserve space */ res_start = rp->start; res_size = rp->end - rp->start + 1; - if (!request_mem_region (res_start, res_size, "atyfb")) + if (!request_mem_region(res_start, res_size, "atyfb")) return -EBUSY; - /* Allocate framebuffer */ + /* Allocate framebuffer */ info = framebuffer_alloc(sizeof(struct atyfb_par), &pdev->dev); if (!info) { PRINTKE("atyfb_pci_probe() can't alloc fb_info\n"); @@ -3573,7 +3660,8 @@ static int __init atyfb_atari_probe(void) for (m64_num = 0; m64_num < mach64_count; m64_num++) { if (!phys_vmembase[m64_num] || !phys_size[m64_num] || !phys_guiregbase[m64_num]) { - PRINTKI("phys_*[%d] parameters not set => returning early. \n", m64_num); + PRINTKI("phys_*[%d] parameters not set => " + "returning early. \n", m64_num); continue; } @@ -3589,8 +3677,8 @@ static int __init atyfb_atari_probe(void) par->irq = (unsigned int) -1; /* something invalid */ /* - * Map the video memory (physical address given) to somewhere in the - * kernel address space. + * Map the video memory (physical address given) + * to somewhere in the kernel address space. */ info->screen_base = ioremap(phys_vmembase[m64_num], phys_size[m64_num]); info->fix.smem_start = (unsigned long)info->screen_base; /* Fake! */ @@ -3661,12 +3749,12 @@ static void __devexit atyfb_remove(struct fb_info *info) #ifdef CONFIG_MTRR if (par->mtrr_reg >= 0) { - mtrr_del(par->mtrr_reg, 0, 0); - par->mtrr_reg = -1; + mtrr_del(par->mtrr_reg, 0, 0); + par->mtrr_reg = -1; } if (par->mtrr_aper >= 0) { - mtrr_del(par->mtrr_aper, 0, 0); - par->mtrr_aper = -1; + mtrr_del(par->mtrr_aper, 0, 0); + par->mtrr_aper = -1; } #endif #ifndef __sparc__ @@ -3900,29 +3988,29 @@ static const struct dmi_system_id atyfb_reboot_ids[] = { static int __init atyfb_init(void) { - int err1 = 1, err2 = 1; + int err1 = 1, err2 = 1; #ifndef MODULE - char *option = NULL; + char *option = NULL; - if (fb_get_options("atyfb", &option)) - return -ENODEV; - atyfb_setup(option); + if (fb_get_options("atyfb", &option)) + return -ENODEV; + atyfb_setup(option); #endif #ifdef CONFIG_PCI - err1 = pci_register_driver(&atyfb_driver); + err1 = pci_register_driver(&atyfb_driver); #endif #ifdef CONFIG_ATARI - err2 = atyfb_atari_probe(); + err2 = atyfb_atari_probe(); #endif - if (err1 && err2) - return -ENODEV; + if (err1 && err2) + return -ENODEV; - if (dmi_check_system(atyfb_reboot_ids)) - register_reboot_notifier(&atyfb_reboot_notifier); + if (dmi_check_system(atyfb_reboot_ids)) + register_reboot_notifier(&atyfb_reboot_notifier); - return 0; + return 0; } static void __exit atyfb_exit(void) @@ -3951,8 +4039,7 @@ MODULE_PARM_DESC(mclk, "int: override memory clock"); module_param(xclk, int, 0); MODULE_PARM_DESC(xclk, "int: override accelerated engine clock"); module_param(comp_sync, int, 0); -MODULE_PARM_DESC(comp_sync, - "Set composite sync signal to low (0) or high (1)"); +MODULE_PARM_DESC(comp_sync, "Set composite sync signal to low (0) or high (1)"); module_param(mode, charp, 0); MODULE_PARM_DESC(mode, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" "); #ifdef CONFIG_MTRR |