diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wan/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/scsi/aic7xxx/aic79xx_osm.c | 8 | ||||
| -rw-r--r-- | drivers/scsi/aic7xxx/aic7xxx_osm.c | 8 | ||||
| -rw-r--r-- | drivers/staging/asus_oled/README | 2 | ||||
| -rw-r--r-- | drivers/tty/isicom.c | 2 | ||||
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 3 | ||||
| -rw-r--r-- | drivers/usb/storage/Kconfig | 2 |
7 files changed, 15 insertions, 14 deletions
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 423eb26386c..d70ede7a7f9 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -290,8 +290,8 @@ config FARSYNC Frame Relay or X.25/LAPB. If you want the module to be automatically loaded when the interface - is referenced then you should add "alias hdlcX farsync" to - /etc/modprobe.conf for each interface, where X is 0, 1, 2, ..., or + is referenced then you should add "alias hdlcX farsync" to a file + in /etc/modprobe.d/ for each interface, where X is 0, 1, 2, ..., or simply use "alias hdlc* farsync" to indicate all of them. To compile this driver as a module, choose M here: the diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 7d48700257a..9328121804b 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -341,10 +341,10 @@ MODULE_PARM_DESC(aic79xx, " (0/256ms,1/128ms,2/64ms,3/32ms)\n" " slowcrc Turn on the SLOWCRC bit (Rev B only)\n" "\n" -" Sample /etc/modprobe.conf line:\n" -" Enable verbose logging\n" -" Set tag depth on Controller 2/Target 2 to 10 tags\n" -" Shorten the selection timeout to 128ms\n" +" Sample modprobe configuration file:\n" +" # Enable verbose logging\n" +" # Set tag depth on Controller 2/Target 2 to 10 tags\n" +" # Shorten the selection timeout to 128ms\n" "\n" " options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n" ); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index c6251bb4f43..5a477cdc780 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -360,10 +360,10 @@ MODULE_PARM_DESC(aic7xxx, " seltime:<int> Selection Timeout\n" " (0/256ms,1/128ms,2/64ms,3/32ms)\n" "\n" -" Sample /etc/modprobe.conf line:\n" -" Toggle EISA/VLB probing\n" -" Set tag depth on Controller 1/Target 1 to 10 tags\n" -" Shorten the selection timeout to 128ms\n" +" Sample modprobe configuration file:\n" +" # Toggle EISA/VLB probing\n" +" # Set tag depth on Controller 1/Target 1 to 10 tags\n" +" # Shorten the selection timeout to 128ms\n" "\n" " options aic7xxx 'aic7xxx=probe_eisa_vl.tag_info:{{}.{.10}}.seltime:1'\n" ); diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README index 0d82a6d5fa5..2d721232467 100644 --- a/drivers/staging/asus_oled/README +++ b/drivers/staging/asus_oled/README @@ -52,7 +52,7 @@ Configuration There is only one option: start_off. You can use it by: 'modprobe asus_oled start_off=1', or by adding this - line to /etc/modprobe.conf: + line to /etc/modprobe.d/asus_oled.conf: options asus_oled start_off=1 With this option provided, asus_oled driver will switch off the display diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c index 794ecb40017..e1235accab7 100644 --- a/drivers/tty/isicom.c +++ b/drivers/tty/isicom.c @@ -102,7 +102,7 @@ * You can find the original tools for this direct from Multitech * ftp://ftp.multitech.com/ISI-Cards/ * - * Having installed the cards the module options (/etc/modprobe.conf) + * Having installed the cards the module options (/etc/modprobe.d/) * * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4 * diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7c229d30468..ff8605b4b4b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1724,7 +1724,8 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv) /* * Module parameter to control latency timer for NDI FTDI-based USB devices. - * If this value is not set in modprobe.conf.local its value will be set to 1ms. + * If this value is not set in /etc/modprobe.d/ its value will be set + * to 1ms. */ static int ndi_latency_timer = 1; diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index fe2d803a634..7691c866637 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -222,7 +222,7 @@ config USB_LIBUSUAL for usb-storage and ub drivers, and allows to switch binding of these devices without rebuilding modules. - Typical syntax of /etc/modprobe.conf is: + Typical syntax of /etc/modprobe.d/*conf is: options libusual bias="ub" |