diff options
Diffstat (limited to 'drivers')
40 files changed, 1012 insertions, 1699 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 714a6ca30ad..cd5fcc67e95 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -735,6 +735,7 @@ config P54_PCI config ATH5K tristate "Atheros 5xxx wireless cards support" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL + depends on BROKEN ---help--- This module adds support for wireless adapters based on Atheros 5xxx chipset. diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index 79796186713..7d4218206c4 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -48,6 +48,32 @@ static struct pci_device_id adm8211_pci_id_table[] __devinitdata = { { 0 } }; +static struct ieee80211_rate adm8211_rates[] = { + { .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 220, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, /* XX ?? */ +}; + +static const struct ieee80211_channel adm8211_channels[] = { + { .center_freq = 2412}, + { .center_freq = 2417}, + { .center_freq = 2422}, + { .center_freq = 2427}, + { .center_freq = 2432}, + { .center_freq = 2437}, + { .center_freq = 2442}, + { .center_freq = 2447}, + { .center_freq = 2452}, + { .center_freq = 2457}, + { .center_freq = 2462}, + { .center_freq = 2467}, + { .center_freq = 2472}, + { .center_freq = 2484}, +}; + + static void adm8211_eeprom_register_read(struct eeprom_93cx6 *eeprom) { struct adm8211_priv *priv = eeprom->data; @@ -155,17 +181,17 @@ static int adm8211_read_eeprom(struct ieee80211_hw *dev) printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n", pci_name(priv->pdev), (int)chan_range.min, (int)chan_range.max); - priv->modes[0].num_channels = chan_range.max - chan_range.min + 1; - priv->modes[0].channels = priv->channels; + BUILD_BUG_ON(sizeof(priv->channels) != sizeof(adm8211_channels)); - memcpy(priv->channels, adm8211_channels, sizeof(adm8211_channels)); + memcpy(priv->channels, adm8211_channels, sizeof(priv->channels)); + priv->band.channels = priv->channels; + priv->band.n_channels = ARRAY_SIZE(adm8211_channels); + priv->band.bitrates = adm8211_rates; + priv->band.n_bitrates = ARRAY_SIZE(adm8211_rates); for (i = 1; i <= ARRAY_SIZE(adm8211_channels); i++) - if (i >= chan_range.min && i <= chan_range.max) - priv->channels[i - 1].flag = - IEEE80211_CHAN_W_SCAN | - IEEE80211_CHAN_W_ACTIVE_SCAN | - IEEE80211_CHAN_W_IBSS; + if (i < chan_range.min || i > chan_range.max) + priv->channels[i - 1].flags |= IEEE80211_CHAN_DISABLED; switch (priv->eeprom->specific_bbptype) { case ADM8211_BBP_RFMD3000: @@ -347,7 +373,6 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev) unsigned int pktlen; struct sk_buff *skb, *newskb; unsigned int limit = priv->rx_ring_size; - static const u8 rate_tbl[] = {10, 20, 55, 110, 220}; u8 rssi, rate; while (!(priv->rx_ring[entry].status & cpu_to_le32(RDES0_STATUS_OWN))) { @@ -425,12 +450,10 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev) else rx_status.ssi = 100 - rssi; - if (rate <= 4) - rx_status.rate = rate_tbl[rate]; + rx_status.rate_idx = rate; - rx_status.channel = priv->channel; - rx_status.freq = adm8211_channels[priv->channel - 1].freq; - rx_status.phymode = MODE_IEEE80211B; + rx_status.freq = adm8211_channels[priv->channel - 1].center_freq; + rx_status.band = IEEE80211_BAND_2GHZ; ieee80211_rx_irqsafe(dev, skb, &rx_status); } @@ -1054,7 +1077,7 @@ static int adm8211_set_rate(struct ieee80211_hw *dev) if (priv->pdev->revision != ADM8211_REV_BA) { rate_buf[0] = ARRAY_SIZE(adm8211_rates); for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++) - rate_buf[i + 1] = (adm8211_rates[i].rate / 5) | 0x80; + rate_buf[i + 1] = (adm8211_rates[i].bitrate / 5) | 0x80; } else { /* workaround for rev BA specific bug */ rate_buf[0] = 0x04; @@ -1303,9 +1326,10 @@ static int adm8211_set_ssid(struct ieee80211_hw *dev, u8 *ssid, size_t ssid_len) static int adm8211_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) { struct adm8211_priv *priv = dev->priv; + int channel = ieee80211_frequency_to_channel(conf->channel->center_freq); - if (conf->channel != priv->channel) { - priv->channel = conf->channel; + if (channel != priv->channel) { + priv->channel = channel; adm8211_rf_set_channel(dev, priv->channel); } @@ -1680,10 +1704,10 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb, if (control->tx_rate < 0) { short_preamble = 1; - plcp_signal = -control->tx_rate; + plcp_signal = -control->tx_rate->bitrate; } else { short_preamble = 0; - plcp_signal = control->tx_rate; + plcp_signal = control->tx_rate->bitrate; } hdr = (struct ieee80211_hdr *)skb->data; @@ -1880,18 +1904,11 @@ static int __devinit adm8211_probe(struct pci_dev *pdev, SET_IEEE80211_PERM_ADDR(dev, perm_addr); dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr); - dev->flags = IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED; - /* IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */ + /* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */ dev->channel_change_time = 1000; dev->max_rssi = 100; /* FIXME: find better value */ - priv->modes[0].mode = MODE_IEEE80211B; - /* channel info filled in by adm8211_read_eeprom */ - memcpy(priv->rates, adm8211_rates, sizeof(adm8211_rates)); - priv->modes[0].num_rates = ARRAY_SIZE(adm8211_rates); - priv->modes[0].rates = priv->rates; - dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */ priv->retry_limit = 3; @@ -1917,14 +1934,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev, goto err_free_desc; } - priv->channel = priv->modes[0].channels[0].chan; - - err = ieee80211_register_hwmode(dev, &priv->modes[0]); - if (err) { - printk(KERN_ERR "%s (adm8211): Can't register hwmode\n", - pci_name(pdev)); - goto err_free_desc; - } + priv->channel = 1; err = ieee80211_register_hw(dev); if (err) { diff --git a/drivers/net/wireless/adm8211.h b/drivers/net/wireless/adm8211.h index ef326fed42e..8d7c564b3b0 100644 --- a/drivers/net/wireless/adm8211.h +++ b/drivers/net/wireless/adm8211.h @@ -534,61 +534,6 @@ struct adm8211_eeprom { u8 cis_data[0]; /* 0x80, 384 bytes */ } __attribute__ ((packed)); -static const struct ieee80211_rate adm8211_rates[] = { - { .rate = 10, - .val = 10, - .val2 = -10, - .flags = IEEE80211_RATE_CCK_2 }, - { .rate = 20, - .val = 20, - .val2 = -20, - .flags = IEEE80211_RATE_CCK_2 }, - { .rate = 55, - .val = 55, - .val2 = -55, - .flags = IEEE80211_RATE_CCK_2 }, - { .rate = 110, - .val = 110, - .val2 = -110, - .flags = IEEE80211_RATE_CCK_2 } -}; - -struct ieee80211_chan_range { - u8 min; - u8 max; -}; - -static const struct ieee80211_channel adm8211_channels[] = { - { .chan = 1, - .freq = 2412}, - { .chan = 2, - .freq = 2417}, - { .chan = 3, - .freq = 2422}, - { .chan = 4, - .freq = 2427}, - { .chan = 5, - .freq = 2432}, - { .chan = 6, - .freq = 2437}, - { .chan = 7, - .freq = 2442}, - { .chan = 8, - .freq = 2447}, - { .chan = 9, - .freq = 2452}, - { .chan = 10, - .freq = 2457}, - { .chan = 11, - .freq = 2462}, - { .chan = 12, - .freq = 2467}, - { .chan = 13, - .freq = 2472}, - { .chan = 14, - .freq = 2484}, -}; - struct adm8211_priv { struct pci_dev *pdev; spinlock_t lock; @@ -603,9 +548,8 @@ struct adm8211_priv { unsigned int cur_tx, dirty_tx, cur_rx; struct ieee80211_low_level_stats stats; - struct ieee80211_hw_mode modes[1]; - struct ieee80211_channel channels[ARRAY_SIZE(adm8211_channels)]; - struct ieee80211_rate rates[ARRAY_SIZE(adm8211_rates)]; + struct ieee80211_supported_band band; + struct ieee80211_channel channels[14]; int mode; int channel; @@ -643,6 +587,11 @@ struct adm8211_priv { } transceiver_type; }; +struct ieee80211_chan_range { + u8 min; + u8 max; +}; + static const struct ieee80211_chan_range cranges[] = { {1, 11}, /* FCC */ {1, 11}, /* IC */ diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index f13346ba9dd..3e40323cd43 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -468,10 +468,6 @@ struct b43_phy { u8 possible_phymodes; /* GMODE bit enabled? */ bool gmode; - /* Possible ieee80211 subsystem hwmodes for this PHY. - * Which mode is selected, depends on thr GMODE enabled bit */ -#define B43_MAX_PHYHWMODES 2 - struct ieee80211_hw_mode hwmodes[B43_MAX_PHYHWMODES]; /* Analog Type */ u8 analog; @@ -727,7 +723,6 @@ struct b43_wldev { bool bad_frames_preempt; /* Use "Bad Frames Preemption" (default off) */ bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */ - bool short_preamble; /* TRUE, if short preamble is enabled. */ bool short_slot; /* TRUE, if short slot timing is enabled. */ bool radio_hw_enable; /* saved state of radio hardware enabled state */ bool suspend_in_progress; /* TRUE, if we are in a suspend/resume cycle */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 51dfce16178..017a041d07d 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -96,25 +96,29 @@ MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl); * data in there. This data is the same for all devices, so we don't * get concurrency issues */ #define RATETAB_ENT(_rateid, _flags) \ - { \ - .rate = B43_RATE_TO_BASE100KBPS(_rateid), \ - .val = (_rateid), \ - .val2 = (_rateid), \ - .flags = (_flags), \ + { \ + .bitrate = B43_RATE_TO_BASE100KBPS(_rateid), \ + .hw_value = (_rateid), \ + .flags = (_flags), \ } + +/* + * NOTE: When changing this, sync with xmit.c's + * b43_plcp_get_bitrate_idx_* functions! + */ static struct ieee80211_rate __b43_ratetable[] = { - RATETAB_ENT(B43_CCK_RATE_1MB, IEEE80211_RATE_CCK), - RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_CCK_2), - RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_CCK_2), - RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_CCK_2), - RATETAB_ENT(B43_OFDM_RATE_6MB, IEEE80211_RATE_OFDM), - RATETAB_ENT(B43_OFDM_RATE_9MB, IEEE80211_RATE_OFDM), - RATETAB_ENT(B43_OFDM_RATE_12MB, IEEE80211_RATE_OFDM), - RATETAB_ENT(B43_OFDM_RATE_18MB, IEEE80211_RATE_OFDM), - RATETAB_ENT(B43_OFDM_RATE_24MB, IEEE80211_RATE_OFDM), - RATETAB_ENT(B43_OFDM_RATE_36MB, IEEE80211_RATE_OFDM), - RATETAB_ENT(B43_OFDM_RATE_48MB, IEEE80211_RATE_OFDM), - RATETAB_ENT(B43_OFDM_RATE_54MB, IEEE80211_RATE_OFDM), + RATETAB_ENT(B43_CCK_RATE_1MB, 0), + RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE), + RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE), + RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE), + RATETAB_ENT(B43_OFDM_RATE_6MB, 0), + RATETAB_ENT(B43_OFDM_RATE_9MB, 0), + RATETAB_ENT(B43_OFDM_RATE_12MB, 0), + RATETAB_ENT(B43_OFDM_RATE_18MB, 0), + RATETAB_ENT(B43_OFDM_RATE_24MB, 0), + RATETAB_ENT(B43_OFDM_RATE_36MB, 0), + RATETAB_ENT(B43_OFDM_RATE_48MB, 0), + RATETAB_ENT(B43_OFDM_RATE_54MB, 0), }; #define b43_a_ratetable (__b43_ratetable + 4) @@ -126,14 +130,8 @@ static struct ieee80211_rate __b43_ratetable[] = { #define CHANTAB_ENT(_chanid, _freq) \ { \ - .chan = (_chanid), \ - .freq = (_freq), \ - .val = (_chanid), \ - .flag = IEEE80211_CHAN_W_SCAN | \ - IEEE80211_CHAN_W_ACTIVE_SCAN | \ - IEEE80211_CHAN_W_IBSS, \ - .power_level = 0xFF, \ - .antenna_max = 0xFF, \ + .center_freq = (_freq), \ + .hw_value = (_chanid), \ } static struct ieee80211_channel b43_2ghz_chantable[] = { CHANTAB_ENT(1, 2412), @@ -151,9 +149,8 @@ static struct ieee80211_channel b43_2ghz_chantable[] = { CHANTAB_ENT(13, 2472), CHANTAB_ENT(14, 2484), }; -#define b43_2ghz_chantable_size ARRAY_SIZE(b43_2ghz_chantable) -#if 0 +#ifdef NOTYET static struct ieee80211_channel b43_5ghz_chantable[] = { CHANTAB_ENT(36, 5180), CHANTAB_ENT(40, 5200), @@ -169,9 +166,22 @@ static struct ieee80211_channel b43_5ghz_chantable[] = { CHANTAB_ENT(161, 5805), CHANTAB_ENT(165, 5825), }; -#define b43_5ghz_chantable_size ARRAY_SIZE(b43_5ghz_chantable) + +static struct ieee80211_supported_band b43_band_5GHz = { + .channels = b43_5ghz_chantable, + .n_channels = ARRAY_SIZE(b43_5ghz_chantable), + .bitrates = b43_a_ratetable, + .n_bitrates = b43_a_ratetable_size, +}; #endif +static struct ieee80211_supported_band b43_band_2GHz = { + .channels = b43_2ghz_chantable, + .n_channels = ARRAY_SIZE(b43_2ghz_chantable), + .bitrates = b43_g_ratetable, + .n_bitrates = b43_g_ratetable_size, +}; + static void b43_wireless_core_exit(struct b43_wldev *dev); static int b43_wireless_core_init(struct b43_wldev *dev); static void b43_wireless_core_stop(struct b43_wldev *dev); @@ -1222,17 +1232,18 @@ static void b43_write_beacon_template(struct b43_wldev *dev, } static void b43_write_probe_resp_plcp(struct b43_wldev *dev, - u16 shm_offset, u16 size, u8 rate) + u16 shm_offset, u16 size, + struct ieee80211_rate *rate) { struct b43_plcp_hdr4 plcp; u32 tmp; __le16 dur; plcp.data = 0; - b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate); + b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value); dur = ieee80211_generic_frame_duration(dev->wl->hw, dev->wl->vif, size, - B43_RATE_TO_BASE100KBPS(rate)); + rate); /* Write PLCP in two parts and timing for packet transfer */ tmp = le32_to_cpu(plcp.data); b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF); @@ -1247,7 +1258,8 @@ static void b43_write_probe_resp_plcp(struct b43_wldev *dev, * 3) Stripping TIM */ static const u8 * b43_generate_probe_resp(struct b43_wldev *dev, - u16 *dest_size, u8 rate) + u16 *dest_size, + struct ieee80211_rate *rate) { const u8 *src_data; u8 *dest_data; @@ -1292,7 +1304,7 @@ static const u8 * b43_generate_probe_resp(struct b43_wldev *dev, IEEE80211_STYPE_PROBE_RESP); dur = ieee80211_generic_frame_duration(dev->wl->hw, dev->wl->vif, *dest_size, - B43_RATE_TO_BASE100KBPS(rate)); + rate); hdr->duration_id = dur; return dest_data; @@ -1300,7 +1312,8 @@ static const u8 * b43_generate_probe_resp(struct b43_wldev *dev, static void b43_write_probe_resp_template(struct b43_wldev *dev, u16 ram_offset, - u16 shm_size_offset, u8 rate) + u16 shm_size_offset, + struct ieee80211_rate *rate) { const u8 *probe_resp_data; u16 size; @@ -1313,14 +1326,15 @@ static void b43_write_probe_resp_template(struct b43_wldev *dev, /* Looks like PLCP headers plus packet timings are stored for * all possible basic rates */ - b43_write_probe_resp_plcp(dev, 0x31A, size, B43_CCK_RATE_1MB); - b43_write_probe_resp_plcp(dev, 0x32C, size, B43_CCK_RATE_2MB); - b43_write_probe_resp_plcp(dev, 0x33E, size, B43_CCK_RATE_5MB); - b43_write_probe_resp_plcp(dev, 0x350, size, B43_CCK_RATE_11MB); + b43_write_probe_resp_plcp(dev, 0x31A, size, &b43_b_ratetable[0]); + b43_write_probe_resp_plcp(dev, 0x32C, size, &b43_b_ratetable[1]); + b43_write_probe_resp_plcp(dev, 0x33E, size, &b43_b_ratetable[2]); + b43_write_probe_resp_plcp(dev, 0x350, size, &b43_b_ratetable[3]); size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6)); b43_write_template_common(dev, probe_resp_data, - size, ram_offset, shm_size_offset, rate); + size, ram_offset, shm_size_offset, + rate->hw_value); kfree(probe_resp_data); } @@ -1388,7 +1402,7 @@ static void handle_irq_beacon(struct b43_wldev *dev) b43_write_beacon_template(dev, 0x68, 0x18, B43_CCK_RATE_1MB); b43_write_probe_resp_template(dev, 0x268, 0x4A, - B43_CCK_RATE_11MB); + &__b43_ratetable[3]); wl->beacon0_uploaded = 1; } cmd |= B43_MACCMD_BEACON0_VALID; @@ -2830,14 +2844,11 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) mutex_lock(&wl->mutex); /* Switch the PHY mode (if necessary). */ - switch (conf->phymode) { - case MODE_IEEE80211A: + switch (conf->channel->band) { + case IEEE80211_BAND_5GHZ: new_phymode = B43_PHYMODE_A; break; - case MODE_IEEE80211B: - new_phymode = B43_PHYMODE_B; - break; - case MODE_IEEE80211G: + case IEEE80211_BAND_2GHZ: new_phymode = B43_PHYMODE_G; break; default: @@ -2863,8 +2874,8 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) /* Switch to the requested channel. * The firmware takes care of races with the TX handler. */ - if (conf->channel_val != phy->channel) - b43_radio_selectchannel(dev, conf->channel_val, 0); + if (conf->channel->hw_value != phy->channel) + b43_radio_selectchannel(dev, conf->channel->hw_value, 0); /* Enable/Disable ShortSlot timing. */ if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) != @@ -3810,9 +3821,7 @@ static int b43_setup_modes(struct b43_wldev *dev, bool have_2ghz_phy, bool have_5ghz_phy) { struct ieee80211_hw *hw = dev->wl->hw; - struct ieee80211_hw_mode *mode; struct b43_phy *phy = &dev->phy; - int err; /* XXX: This function will go away soon, when mac80211 * band stuff is rewritten. So this is just a hack. @@ -3821,15 +3830,7 @@ static int b43_setup_modes(struct b43_wldev *dev, * This assumption is OK, as any B, N or A PHY will already * have died a horrible sanity check death earlier. */ - mode = &phy->hwmodes[0]; - mode->mode = MODE_IEEE80211G; - mode->num_channels = b43_2ghz_chantable_size; - mode->channels = b43_2ghz_chantable; - mode->num_rates = b43_g_ratetable_size; - mode->rates = b43_g_ratetable; - err = ieee80211_register_hwmode(hw, mode); - if (err) - return err; + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &b43_band_2GHz; phy->possible_phymodes |= B43_PHYMODE_G; return 0; diff --git a/drivers/net/wireless/b43/sysfs.c b/drivers/net/wireless/b43/sysfs.c index f4faff6a7d6..275095b8cbe 100644 --- a/drivers/net/wireless/b43/sysfs.c +++ b/drivers/net/wireless/b43/sysfs.c @@ -47,29 +47,6 @@ static int get_integer(const char *buf, size_t count) return ret; } -static int get_boolean(const char *buf, size_t count) -{ - if (count != 0) { - if (buf[0] == '1') - return 1; - if (buf[0] == '0') - return 0; - if (count >= 4 && memcmp(buf, "true", 4) == 0) - return 1; - if (count >= 5 && memcmp(buf, "false", 5) == 0) - return 0; - if (count >= 3 && memcmp(buf, "yes", 3) == 0) - return 1; - if (count >= 2 && memcmp(buf, "no", 2) == 0) - return 0; - if (count >= 2 && memcmp(buf, "on", 2) == 0) - return 1; - if (count >= 3 && memcmp(buf, "off", 3) == 0) - return 0; - } - return -EINVAL; -} - static ssize_t b43_attr_interfmode_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -155,82 +132,18 @@ static ssize_t b43_attr_interfmode_store(struct device *dev, static DEVICE_ATTR(interference, 0644, b43_attr_interfmode_show, b43_attr_interfmode_store); -static ssize_t b43_attr_preamble_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct b43_wldev *wldev = dev_to_b43_wldev(dev); - ssize_t count; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - mutex_lock(&wldev->wl->mutex); - - if (wldev->short_preamble) - count = - snprintf(buf, PAGE_SIZE, "1 (Short Preamble enabled)\n"); - else - count = - snprintf(buf, PAGE_SIZE, "0 (Short Preamble disabled)\n"); - - mutex_unlock(&wldev->wl->mutex); - - return count; -} - -static ssize_t b43_attr_preamble_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct b43_wldev *wldev = dev_to_b43_wldev(dev); - unsigned long flags; - int value; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - value = get_boolean(buf, count); - if (value < 0) - return value; - mutex_lock(&wldev->wl->mutex); - spin_lock_irqsave(&wldev->wl->irq_lock, flags); - - wldev->short_preamble = !!value; - - spin_unlock_irqrestore(&wldev->wl->irq_lock, flags); - mutex_unlock(&wldev->wl->mutex); - - return count; -} - -static DEVICE_ATTR(shortpreamble, 0644, - b43_attr_preamble_show, b43_attr_preamble_store); - int b43_sysfs_register(struct b43_wldev *wldev) { struct device *dev = wldev->dev->dev; - int err; B43_WARN_ON(b43_status(wldev) != B43_STAT_INITIALIZED); - err = device_create_file(dev, &dev_attr_interference); - if (err) - goto out; - err = device_create_file(dev, &dev_attr_shortpreamble); - if (err) - goto err_remove_interfmode; - - out: - return err; - err_remove_interfmode: - device_remove_file(dev, &dev_attr_interference); - goto out; + return device_create_file(dev, &dev_attr_interference); } void b43_sysfs_unregister(struct b43_wldev *wldev) { struct device *dev = wldev->dev->dev; - device_remove_file(dev, &dev_attr_shortpreamble); device_remove_file(dev, &dev_attr_interference); } diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 7caa26eb410..4014b6c8272 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -32,46 +32,48 @@ #include "dma.h" -/* Extract the bitrate out of a CCK PLCP header. */ -static u8 b43_plcp_get_bitrate_cck(struct b43_plcp_hdr6 *plcp) +/* Extract the bitrate index out of a CCK PLCP header. */ +static int b43_plcp_get_bitrate_idx_cck(struct b43_plcp_hdr6 *plcp) { switch (plcp->raw[0]) { case 0x0A: - return B43_CCK_RATE_1MB; + return 0; case 0x14: - return B43_CCK_RATE_2MB; + return 1; case 0x37: - return B43_CCK_RATE_5MB; + return 2; case 0x6E: - return B43_CCK_RATE_11MB; + return 3; } B43_WARN_ON(1); - return 0; + return -1; } -/* Extract the bitrate out of an OFDM PLCP header. */ -static u8 b43_plcp_get_bitrate_ofdm(struct b43_plcp_hdr6 *plcp) +/* Extract the bitrate index out of an OFDM PLCP header. */ +static u8 b43_plcp_get_bitrate_idx_ofdm(struct b43_plcp_hdr6 *plcp, bool aphy) { + int base = aphy ? 0 : 4; + switch (plcp->raw[0] & 0xF) { case 0xB: - return B43_OFDM_RATE_6MB; + return base + 0; case 0xF: - return B43_OFDM_RATE_9MB; + return base + 1; case 0xA: - return B43_OFDM_RATE_12MB; + return base + 2; case 0xE: - return B43_OFDM_RATE_18MB; + return base + 3; case 0x9: - return B43_OFDM_RATE_24MB; + return base + 4; case 0xD: - return B43_OFDM_RATE_36MB; + return base + 5; case 0x8: - return B43_OFDM_RATE_48MB; + return base + 6; case 0xC: - return B43_OFDM_RATE_54MB; + return base + 7; } B43_WARN_ON(1); - return 0; + return -1; } u8 b43_plcp_get_ratecode_cck(const u8 bitrate) @@ -191,6 +193,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, (const struct ieee80211_hdr *)fragment_data; int use_encryption = (!(txctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)); u16 fctl = le16_to_cpu(wlhdr->frame_control); + struct ieee80211_rate *fbrate; u8 rate, rate_fb; int rate_ofdm, rate_fb_ofdm; unsigned int plcp_fragment_len; @@ -200,9 +203,11 @@ int b43_generate_txhdr(struct b43_wldev *dev, memset(txhdr, 0, sizeof(*txhdr)); - rate = txctl->tx_rate; + WARN_ON(!txctl->tx_rate); + rate = txctl->tx_rate ? txctl->tx_rate->hw_value : B43_CCK_RATE_1MB; rate_ofdm = b43_is_ofdm_rate(rate); - rate_fb = (txctl->alt_retry_rate == -1) ? rate : txctl->alt_retry_rate; + fbrate = txctl->alt_retry_rate ? : txctl->tx_rate; + rate_fb = fbrate->hw_value; rate_fb_ofdm = b43_is_ofdm_rate(rate_fb); if (rate_ofdm) @@ -221,11 +226,10 @@ int b43_generate_txhdr(struct b43_wldev *dev, * use the original dur_id field. */ txhdr->dur_fb = wlhdr->duration_id; } else { - int fbrate_base100kbps = B43_RATE_TO_BASE100KBPS(rate_fb); txhdr->dur_fb = ieee80211_generic_frame_duration(dev->wl->hw, txctl->vif, fragment_len, - fbrate_base100kbps); + fbrate); } plcp_fragment_len = fragment_len + FCS_LEN; @@ -287,7 +291,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, phy_ctl |= B43_TXH_PHY_ENC_OFDM; else phy_ctl |= B43_TXH_PHY_ENC_CCK; - if (dev->short_preamble) + if (txctl->flags & IEEE80211_TXCTL_SHORT_PREAMBLE) phy_ctl |= B43_TXH_PHY_SHORTPRMBL; switch (b43_ieee80211_antenna_sanitize(dev, txctl->antenna_sel_tx)) { @@ -332,7 +336,8 @@ int b43_generate_txhdr(struct b43_wldev *dev, int rts_rate_ofdm, rts_rate_fb_ofdm; struct b43_plcp_hdr6 *plcp; - rts_rate = txctl->rts_cts_rate; + WARN_ON(!txctl->rts_cts_rate);< |