diff options
Diffstat (limited to 'drivers')
55 files changed, 150 insertions, 152 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index c7219663f2b..f031b873233 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -3,6 +3,7 @@ # menu "Serial ATA (prod) and Parallel ATA (experimental) drivers" + depends on HAS_IOMEM config ATA tristate "ATA device support" diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index 0300e7f54cc..2e18a63ead3 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -6,6 +6,7 @@ # menu "Auxiliary Display support" + depends on PARPORT config KS0108 tristate "KS0108 LCD Controller" diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 17ee97f3a99..b4c8319138b 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -444,8 +444,6 @@ config CDROM_PKTCDVD_WCACHE this option is dangerous unless the CD-RW media is known good, as we don't do deferred write error handling yet. -source "drivers/s390/block/Kconfig" - config ATA_OVER_ETH tristate "ATA over Ethernet support" depends on NET @@ -453,6 +451,8 @@ config ATA_OVER_ETH This driver provides Support for ATA over Ethernet block devices like the Coraid EtherDrive (R) Storage Blade. +source "drivers/s390/block/Kconfig" + endmenu endif diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 2df42fdcdc9..abcafac6473 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -6,6 +6,7 @@ menu "Character devices" config VT bool "Virtual terminal" if EMBEDDED + depends on !S390 select INPUT default y if !VIOCONS ---help--- @@ -81,6 +82,7 @@ config VT_HW_CONSOLE_BINDING config SERIAL_NONSTANDARD bool "Non-standard serial port support" + depends on HAS_IOMEM ---help--- Say Y here if you have any non-standard serial boards -- boards which aren't supported using the standard "dumb" serial driver. @@ -765,7 +767,7 @@ config NVRAM config RTC tristate "Enhanced Real Time Clock Support" - depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH + depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH && !S390 ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you @@ -813,7 +815,7 @@ config SGI_IP27_RTC config GEN_RTC tristate "Generic /dev/rtc emulation" - depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV + depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV && !S390 ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you @@ -858,6 +860,7 @@ config COBALT_LCD config DTLK tristate "Double Talk PC internal speech card support" + depends on ISA help This driver is for the DoubleTalk PC, a speech synthesizer manufactured by RC Systems (<http://www.rcsys.com/>). It is also @@ -1043,7 +1046,7 @@ config HPET_MMAP config HANGCHECK_TIMER tristate "Hangcheck timer" - depends on X86 || IA64 || PPC64 + depends on X86 || IA64 || PPC64 || S390 help The hangcheck-timer module detects when the system has gone out to lunch past a certain margin. It can reboot the system @@ -1078,5 +1081,7 @@ config DEVPORT depends on ISA || PCI default y +source "drivers/s390/char/Kconfig" + endmenu diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig index a6dcb291815..b894f67fdf1 100644 --- a/drivers/char/ipmi/Kconfig +++ b/drivers/char/ipmi/Kconfig @@ -3,6 +3,8 @@ # menu "IPMI" + depends on HAS_IOMEM + config IPMI_HANDLER tristate 'IPMI top-level message handler' help diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index 11089be0691..dc4e1ff7f56 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -3,6 +3,7 @@ # menu "TPM devices" + depends on HAS_IOMEM config TCG_TPM tristate "TPM Hardware Support" diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index f4c634504d1..e678a33ea67 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -56,4 +56,26 @@ config CRYPTO_DEV_GEODE To compile this driver as a module, choose M here: the module will be called geode-aes. +config ZCRYPT + tristate "Support for PCI-attached cryptographic adapters" + depends on S390 + select ZCRYPT_MONOLITHIC if ZCRYPT="y" + default "m" + help + Select this option if you want to use a PCI-attached cryptographic + adapter like: + + PCI Cryptographic Accelerator (PCICA) + + PCI Cryptographic Coprocessor (PCICC) + + PCI-X Cryptographic Coprocessor (PCIXCC) + + Crypto Express2 Coprocessor (CEX2C) + + Crypto Express2 Accelerator (CEX2A) + +config ZCRYPT_MONOLITHIC + bool "Monolithic zcrypt module" + depends on ZCRYPT="m" + help + Select this option if you want to have a single module z90crypt.ko + that contains all parts of the crypto device driver (ap bus, + request router and all the card drivers). + endmenu diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 30d021d1a07..72be6c63edf 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -3,6 +3,7 @@ # menu "DMA Engine support" + depends on !S390 config DMA_ENGINE bool "Support for DMA engines" diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 4f0898400c6..807c402df04 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -7,6 +7,7 @@ # menu 'EDAC - error detection and reporting (RAS) (EXPERIMENTAL)' + depends on HAS_IOMEM config EDAC tristate "EDAC core system error reporting (EXPERIMENTAL)" diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 3ba3a5221c4..4d1cb5b855d 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -4,6 +4,7 @@ menuconfig HWMON tristate "Hardware Monitoring support" + depends on HAS_IOMEM default y help Hardware monitoring devices let you monitor the hardware health diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 434a61b415a..96867347bcb 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -4,6 +4,7 @@ menuconfig I2C tristate "I2C support" + depends on HAS_IOMEM ---help--- I2C (pronounce: I-square-C) is a slow serial bus protocol used in many micro controller applications and developed by Philips. SMBus, diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 1d06b415ede..9040809d2c2 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -7,6 +7,7 @@ if BLOCK menu "ATA/ATAPI/MFM/RLL support" + depends on HAS_IOMEM config IDE tristate "ATA/ATAPI/MFM/RLL support" diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig index 61d7809a5a2..f21426ad2fa 100644 --- a/drivers/ieee1394/Kconfig +++ b/drivers/ieee1394/Kconfig @@ -1,4 +1,5 @@ menu "IEEE 1394 (FireWire) support" + depends on PCI || BROKEN config IEEE1394 tristate "IEEE 1394 (FireWire) support" diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig index 37deaae4919..994decc7bcf 100644 --- a/drivers/infiniband/Kconfig +++ b/drivers/infiniband/Kconfig @@ -1,4 +1,5 @@ menu "InfiniBand support" + depends on HAS_IOMEM config INFINIBAND depends on PCI || BROKEN diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 0e9b69535ad..f814fb3a469 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -3,6 +3,7 @@ # menu "Input device support" + depends on !S390 config INPUT tristate "Generic input layer (needed for keyboard, mouse, ...)" if EMBEDDED diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig index c90afeea54a..d42fe89cddf 100644 --- a/drivers/isdn/Kconfig +++ b/drivers/isdn/Kconfig @@ -3,6 +3,7 @@ # menu "ISDN subsystem" + depends on !S390 config ISDN tristate "ISDN support" diff --git a/drivers/kvm/Kconfig b/drivers/kvm/Kconfig index 703cc88d1ef..e8e37d82647 100644 --- a/drivers/kvm/Kconfig +++ b/drivers/kvm/Kconfig @@ -2,6 +2,7 @@ # KVM configuration # menu "Virtualization" + depends on X86 config KVM tristate "Kernel-based Virtual Machine (KVM) support" diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 80acd08f0e9..87d2046f866 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -1,5 +1,6 @@ menu "LED devices" + depends on HAS_IOMEM config NEW_LEDS bool "LED Support" diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 91d25798ae4..3a80e0cc736 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -3,6 +3,7 @@ # menu "Multimedia devices" + depends on HAS_IOMEM config VIDEO_DEV tristate "Video For Linux" diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig index 71037f91c22..c88cc75ab49 100644 --- a/drivers/message/fusion/Kconfig +++ b/drivers/message/fusion/Kconfig @@ -1,5 +1,6 @@ menu "Fusion MPT device support" + depends on PCI config FUSION bool diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig index 6443392bfff..f4ac21e5771 100644 --- a/drivers/message/i2o/Kconfig +++ b/drivers/message/i2o/Kconfig @@ -1,5 +1,6 @@ menu "I2O device support" + depends on PCI config I2O tristate "I2O support" diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ab6e985275b..a20a51efe11 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -3,6 +3,7 @@ # menu "Multifunction device drivers" + depends on HAS_IOMEM config MFD_SM501 tristate "Support for Silicon Motion SM501" diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 45b7d53b949..c0b41e8bcd9 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -4,6 +4,7 @@ menuconfig MMC tristate "MMC/SD card support" + depends on HAS_IOMEM help MMC is the "multi-media card" bus protocol. diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index c1b47db29bd..fbec8cd55e3 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -2,6 +2,7 @@ menuconfig MTD tristate "Memory Technology Device (MTD) support" + depends on HAS_IOMEM help Memory Technology Devices are flash, RAM and similar chips, often used for solid state file systems on embedded devices. This option diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index f994f129f3d..c0d3101eb6a 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -3,6 +3,7 @@ # menu "PHY device support" + depends on !S390 config PHYLIB tristate "PHY Device support and infrastructure" diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index e273347dc60..e3f5bb0fe60 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -3,6 +3,7 @@ # menu "Wireless LAN" + depends on !S390 config WLAN_PRE80211 bool "Wireless LAN (pre-802.11)" diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 36c6a1bfe55..f46c69e4ed8 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -6,6 +6,7 @@ # menu "Parallel port support" + depends on HAS_IOMEM config PARPORT tristate "Parallel port support" diff --git a/drivers/pnp/Kconfig b/drivers/pnp/Kconfig index c5143201419..1959cef8e9d 100644 --- a/drivers/pnp/Kconfig +++ b/drivers/pnp/Kconfig @@ -3,6 +3,7 @@ # menu "Plug and Play support" + depends on HAS_IOMEM config PNP bool "Plug and Play support" diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 76422eded36..1759baad439 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -3,6 +3,7 @@ # menu "Real Time Clock" + depends on !S390 config RTC_LIB tristate diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig index b250c535450..e879b212cf4 100644 --- a/drivers/s390/block/Kconfig +++ b/drivers/s390/block/Kconfig @@ -1,11 +1,9 @@ -if S390 && BLOCK - comment "S/390 block device drivers" - depends on S390 + depends on S390 && BLOCK config BLK_DEV_XPRAM tristate "XPRAM disk support" - depends on S390 + depends on S390 && BLOCK help Select this option if you want to use your expanded storage on S/390 or zSeries as a disk. This is useful as a _fast_ swap device if you @@ -15,12 +13,13 @@ config BLK_DEV_XPRAM config DCSSBLK tristate "DCSSBLK support" + depends on S390 && BLOCK help Support for dcss block device config DASD tristate "Support for DASD devices" - depends on CCW + depends on CCW && BLOCK help Enable this option if you want to access DASDs directly utilizing S/390s channel subsystem commands. This is necessary for running @@ -62,5 +61,3 @@ config DASD_EER This driver provides a character device interface to the DASD extended error reporting. This is only needed if you want to use applications written for the EER facility. - -endif diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 977521013fe..bfeca57098f 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -2174,9 +2174,10 @@ dasd_generic_notify(struct ccw_device *cdev, int event) return ret; } -struct dasd_ccw_req * dasd_generic_build_rdc(struct dasd_device *device, - void *rdc_buffer, - int rdc_buffer_size, char *magic) +static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device, + void *rdc_buffer, + int rdc_buffer_size, + char *magic) { struct dasd_ccw_req *cqr; struct ccw1 *ccw; @@ -2219,6 +2220,7 @@ int dasd_generic_read_dev_chars(struct dasd_device *device, char *magic, dasd_sfree_request(cqr, cqr->device); return ret; } +EXPORT_SYMBOL_GPL(dasd_generic_read_dev_chars); static int __init dasd_init(void) diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index e810e4a44ed..eccac1c3b71 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -50,6 +50,7 @@ struct dasd_diag_private { struct dasd_diag_rw_io iob; struct dasd_diag_init_io iib; blocknum_t pt_block; + struct ccw_dev_id dev_id; }; struct dasd_diag_req { @@ -102,7 +103,7 @@ mdsk_init_io(struct dasd_device *device, unsigned int blocksize, iib = &private->iib; memset(iib, 0, sizeof (struct dasd_diag_init_io)); - iib->dev_nr = _ccw_device_get_device_number(device->cdev); + iib->dev_nr = private->dev_id.devno; iib->block_size = blocksize; iib->offset = offset; iib->flaga = DASD_DIAG_FLAGA_DEFAULT; @@ -127,7 +128,7 @@ mdsk_term_io(struct dasd_device * device) private = (struct dasd_diag_private *) device->private; iib = &private->iib; memset(iib, 0, sizeof (struct dasd_diag_init_io)); - iib->dev_nr = _ccw_device_get_device_number(device->cdev); + iib->dev_nr = private->dev_id.devno; rc = dia250(iib, TERM_BIO); return rc; } @@ -166,7 +167,7 @@ dasd_start_diag(struct dasd_ccw_req * cqr) private = (struct dasd_diag_private *) device->private; dreq = (struct dasd_diag_req *) cqr->data; - private->iob.dev_nr = _ccw_device_get_device_number(device->cdev); + private->iob.dev_nr = private->dev_id.devno; private->iob.key = 0; private->iob.flags = DASD_DIAG_RWFLAG_ASYNC; private->iob.block_count = dreq->block_count; @@ -323,11 +324,12 @@ dasd_diag_check_device(struct dasd_device *device) "memory allocation failed for private data"); return -ENOMEM; } + ccw_device_get_id(device->cdev, &private->dev_id); device->private = (void *) private; } /* Read Device Characteristics */ rdc_data = (void *) &(private->rdc_data); - rdc_data->dev_nr = _ccw_device_get_device_number(device->cdev); + rdc_data->dev_nr = private->dev_id.devno; rdc_data->rdc_len = sizeof (struct dasd_diag_characteristics); rc = diag210((struct diag210 *) rdc_data); diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index c9583fbc2a7..418b4e63a4f 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -450,9 +450,9 @@ dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid) return 0; } -struct dasd_ccw_req * dasd_eckd_build_rcd_lpm(struct dasd_device *device, - void *rcd_buffer, - struct ciw *ciw, __u8 lpm) +static struct dasd_ccw_req *dasd_eckd_build_rcd_lpm(struct dasd_device *device, + void *rcd_buffer, + struct ciw *ciw, __u8 lpm) { struct dasd_ccw_req *cqr; struct ccw1 *ccw; diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index 758cfb54286..672eb0a3dd0 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -255,6 +255,7 @@ dasd_ioctl_information(struct dasd_device *device, unsigned long flags; int rc; struct ccw_device *cdev; + struct ccw_dev_id dev_id; if (!device->discipline->fill_info) return -EINVAL; @@ -270,8 +271,9 @@ dasd_ioctl_information(struct dasd_device *device, } cdev = device->cdev; + ccw_device_get_id(cdev, &dev_id); - dasd_info->devno = _ccw_device_get_device_number(device->cdev); + dasd_info->devno = dev_id.devno; dasd_info->schid = _ccw_device_get_subchannel_number(device->cdev); dasd_info->cu_type = cdev->id.cu_type; dasd_info->cu_model = cdev->id.cu_model; diff --git a/drivers/s390/Kconfig b/drivers/s390/char/Kconfig index 165af398fde..66102a18432 100644 --- a/drivers/s390/Kconfig +++ b/drivers/s390/char/Kconfig @@ -1,69 +1,9 @@ -config CCW - bool - default y - -source "drivers/block/Kconfig" - -source "drivers/md/Kconfig" - - -menu "Character device drivers" - -config UNIX98_PTYS - bool "Unix98 PTY support" - ---help--- - A pseudo terminal (PTY) is a software device consisting of two - halves: a master and a slave. The slave device behaves identical to - a physical terminal; the master device is used by a process to - read data from and write data to the slave, thereby emulating a - terminal. Typical programs for the master side are telnet servers - and xterms. - - Linux has traditionally used the BSD-like names /dev/ptyxx for - masters and /dev/ttyxx for slaves of pseudo terminals. This scheme - has a number of problems. The GNU C library glibc 2.1 and later, - however, supports the Unix98 naming standard: in order to acquire a - pseudo terminal, a process opens /dev/ptmx; the number of the pseudo - terminal is then made available to the process and the pseudo - terminal slave can be accessed as /dev/pts/<numbe |