diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/hwmon/Kconfig | 21 | ||||
-rw-r--r-- | drivers/hwmon/Makefile | 2 | ||||
-rw-r--r-- | drivers/hwmon/hwmon-vid.c | 42 | ||||
-rw-r--r-- | drivers/hwmon/it87.c | 29 | ||||
-rw-r--r-- | drivers/hwmon/lm78.c | 305 | ||||
-rw-r--r-- | drivers/hwmon/max1111.c | 27 | ||||
-rw-r--r-- | drivers/hwmon/sch5627.c | 334 | ||||
-rw-r--r-- | drivers/hwmon/sch5636.c | 539 | ||||
-rw-r--r-- | drivers/hwmon/sch56xx-common.c | 340 | ||||
-rw-r--r-- | drivers/hwmon/sch56xx-common.h | 24 | ||||
-rw-r--r-- | drivers/hwmon/sht15.c | 2 | ||||
-rw-r--r-- | drivers/hwmon/via-cputemp.c | 44 |
12 files changed, 1243 insertions, 466 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 5f888f7e7dc..0598cd22edf 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1041,8 +1041,13 @@ config SENSORS_SMSC47B397 This driver can also be built as a module. If so, the module will be called smsc47b397. +config SENSORS_SCH56XX_COMMON + tristate + default n + config SENSORS_SCH5627 tristate "SMSC SCH5627" + select SENSORS_SCH56XX_COMMON help If you say yes here you get support for the hardware monitoring features of the SMSC SCH5627 Super-I/O chip. @@ -1050,6 +1055,21 @@ config SENSORS_SCH5627 This driver can also be built as a module. If so, the module will be called sch5627. +config SENSORS_SCH5636 + tristate "SMSC SCH5636" + select SENSORS_SCH56XX_COMMON + help + SMSC SCH5636 Super I/O chips include an embedded microcontroller for + hardware monitoring solutions, allowing motherboard manufacturers to + create their own custom hwmon solution based upon the SCH5636. + + Currently this driver only supports the Fujitsu Theseus SCH5636 based + hwmon solution. Say yes here if you want support for the Fujitsu + Theseus' hardware monitoring features. + + This driver can also be built as a module. If so, the module + will be called sch5636. + config SENSORS_ADS1015 tristate "Texas Instruments ADS1015" depends on I2C @@ -1142,6 +1162,7 @@ config SENSORS_TWL4030_MADC config SENSORS_VIA_CPUTEMP tristate "VIA CPU temperature sensor" depends on X86 + select HWMON_VID help If you say yes here you get support for the temperature sensor inside your CPU. Supported are all known variants of diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 28061cfa0cd..d7995a1d078 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -95,7 +95,9 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o +obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o +obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SHT21) += sht21.o obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index c8195a077da..932da8a5aaf 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -140,7 +140,11 @@ int vid_from_reg(int val, u8 vrm) return(val & 0x10 ? 975 - (val & 0xF) * 25 : 1750 - val * 50); case 13: + case 131: val &= 0x3f; + /* Exception for Eden ULV 500 MHz */ + if (vrm == 131 && val == 0x3f) + val++; return(1708 - val * 16); case 14: /* Intel Core */ /* compute in uV, round to mV */ @@ -205,11 +209,45 @@ static struct vrm_model vrm_models[] = { {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nehemiah */ {X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M, Eden-N */ {X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0}, /* No information */ - {X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13}, /* C7, Esther */ + {X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13}, /* C7-M, C7, Eden (Esther) */ + {X86_VENDOR_CENTAUR, 0x6, 0xD, ANY, 134}, /* C7-D, C7-M, C7, Eden (Esther) */ {X86_VENDOR_UNKNOWN, ANY, ANY, ANY, 0} /* stop here */ }; +/* + * Special case for VIA model D: there are two different possible + * VID tables, so we have to figure out first, which one must be + * used. This resolves temporary drm value 134 to 14 (Intel Core + * 7-bit VID), 13 (Pentium M 6-bit VID) or 131 (Pentium M 6-bit VID + * + quirk for Eden ULV 500 MHz). + * Note: something similar might be needed for model A, I'm not sure. + */ +static u8 get_via_model_d_vrm(void) +{ + unsigned int vid, brand, dummy; + static const char *brands[4] = { + "C7-M", "C7", "Eden", "C7-D" + }; + + rdmsr(0x198, dummy, vid); + vid &= 0xff; + + rdmsr(0x1154, brand, dummy); + brand = ((brand >> 4) ^ (brand >> 2)) & 0x03; + + if (vid > 0x3f) { + pr_info("Using %d-bit VID table for VIA %s CPU\n", + 7, brands[brand]); + return 14; + } else { + pr_info("Using %d-bit VID table for VIA %s CPU\n", + 6, brands[brand]); + /* Enable quirk for Eden */ + return brand == 2 ? 131 : 13; + } +} + static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor) { int i = 0; @@ -247,6 +285,8 @@ u8 vid_which_vrm(void) eff_model += ((eax & 0x000F0000)>>16)<<4; } vrm_ret = find_vrm(eff_family, eff_model, eff_stepping, c->x86_vendor); + if (vrm_ret == 134) + vrm_ret = get_via_model_d_vrm(); if (vrm_ret == 0) pr_info("Unknown VRM version of your x86 CPU\n"); return vrm_ret; diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 5f524775043..d912649fac5 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -1172,6 +1172,32 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); } + +static ssize_t clear_intrusion(struct device *dev, struct device_attribute + *attr, const char *buf, size_t count) +{ + struct it87_data *data = dev_get_drvdata(dev); + long val; + int config; + + if (strict_strtol(buf, 10, &val) < 0 || val != 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + config = it87_read_value(data, IT87_REG_CONFIG); + if (config < 0) { + count = config; + } else { + config |= 1 << 5; + it87_write_value(data, IT87_REG_CONFIG, config); + /* Invalidate cache to force re-read */ + data->valid = 0; + } + mutex_unlock(&data->update_lock); + + return count; +} + static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8); static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9); static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10); @@ -1188,6 +1214,8 @@ static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6); static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16); static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17); static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18); +static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR, + show_alarm, clear_intrusion, 4); static ssize_t show_beep(struct device *dev, struct device_attribute *attr, char *buf) @@ -1350,6 +1378,7 @@ static struct attribute *it87_attributes[] = { &sensor_dev_attr_temp3_alarm.dev_attr.attr, &dev_attr_alarms.attr, + &sensor_dev_attr_intrusion0_alarm.dev_attr.attr, &dev_attr_name.attr, NULL }; diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index 4cb24eafe31..6df0b468171 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -2,7 +2,7 @@ lm78.c - Part of lm_sensors, Linux kernel modules for hardware monitoring Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - Copyright (c) 2007 Jean Delvare <khali@linux-fr.org> + Copyright (c) 2007, 2011 Jean Delvare <khali@linux-fr.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -26,23 +26,21 @@ #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/i2c.h> -#include <linux/platform_device.h> -#include <linux/ioport.h> #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/io.h> -/* ISA device, if found */ -static struct platform_device *pdev; +#ifdef CONFIG_ISA +#include <linux/platform_device.h> +#include <linux/ioport.h> +#include <linux/io.h> +#endif /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned short isa_address = 0x290; - enum chips { lm78, lm79 }; /* Many LM78 constants specified below */ @@ -143,50 +141,12 @@ struct lm78_data { }; -static int lm78_i2c_detect(struct i2c_client *client, - struct i2c_board_info *info); -static int lm78_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id); -static int lm78_i2c_remove(struct i2c_client *client); - -static int __devinit lm78_isa_probe(struct platform_device *pdev); -static int __devexit lm78_isa_remove(struct platform_device *pdev); - static int lm78_read_value(struct lm78_data *data, u8 reg); static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value); static struct lm78_data *lm78_update_device(struct device *dev); static void lm78_init_device(struct lm78_data *data); -static const struct i2c_device_id lm78_i2c_id[] = { - { "lm78", lm78 }, - { "lm79", lm79 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, lm78_i2c_id); - -static struct i2c_driver lm78_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "lm78", - }, - .probe = lm78_i2c_probe, - .remove = lm78_i2c_remove, - .id_table = lm78_i2c_id, - .detect = lm78_i2c_detect, - .address_list = normal_i2c, -}; - -static struct platform_driver lm78_isa_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "lm78", - }, - .probe = lm78_isa_probe, - .remove = __devexit_p(lm78_isa_remove), -}; - - /* 7 Voltages */ static ssize_t show_in(struct device *dev, struct device_attribute *da, char *buf) @@ -514,6 +474,16 @@ static const struct attribute_group lm78_group = { .attrs = lm78_attributes, }; +/* + * ISA related code + */ +#ifdef CONFIG_ISA + +/* ISA device, if found */ +static struct platform_device *pdev; + +static unsigned short isa_address = 0x290; + /* I2C devices get this name attribute automatically, but for ISA devices we must create it by ourselves. */ static ssize_t show_name(struct device *dev, struct device_attribute @@ -525,6 +495,11 @@ static ssize_t show_name(struct device *dev, struct device_attribute } static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); +static struct lm78_data *lm78_data_if_isa(void) +{ + return pdev ? platform_get_drvdata(pdev) : NULL; +} + /* Returns 1 if the I2C chip appears to be an alias of the ISA chip */ static int lm78_alias_detect(struct i2c_client *client, u8 chipid) { @@ -558,12 +533,24 @@ static int lm78_alias_detect(struct i2c_client *client, u8 chipid) return 1; } +#else /* !CONFIG_ISA */ + +static int lm78_alias_detect(struct i2c_client *client, u8 chipid) +{ + return 0; +} + +static struct lm78_data *lm78_data_if_isa(void) +{ + return NULL; +} +#endif /* CONFIG_ISA */ static int lm78_i2c_detect(struct i2c_client *client, struct i2c_board_info *info) { int i; - struct lm78_data *isa = pdev ? platform_get_drvdata(pdev) : NULL; + struct lm78_data *isa = lm78_data_if_isa(); const char *client_name; struct i2c_adapter *adapter = client->adapter; int address = client->addr; @@ -663,76 +650,24 @@ static int lm78_i2c_remove(struct i2c_client *client) return 0; } -static int __devinit lm78_isa_probe(struct platform_device *pdev) -{ - int err; - struct lm78_data *data; - struct resource *res; - - /* Reserve the ISA region */ - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!request_region(res->start + LM78_ADDR_REG_OFFSET, 2, "lm78")) { - err = -EBUSY; - goto exit; - } - - if (!(data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit_release_region; - } - mutex_init(&data->lock); - data->isa_addr = res->start; - platform_set_drvdata(pdev, data); - - if (lm78_read_value(data, LM78_REG_CHIPID) & 0x80) { - data->type = lm79; - data->name = "lm79"; - } else { - data->type = lm78; - data->name = "lm78"; - } - - /* Initialize the LM78 chip */ - lm78_init_device(data); - - /* Register sysfs hooks */ - if ((err = sysfs_create_group(&pdev->dev.kobj, &lm78_group)) - || (err = device_create_file(&pdev->dev, &dev_attr_name))) - goto exit_remove_files; - - data->hwmon_dev = hwmon_device_register(&pdev->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove_files; - } - - return 0; - - exit_remove_files: - sysfs_remove_group(&pdev->dev.kobj, &lm78_group); - device_remove_file(&pdev->dev, &dev_attr_name); - kfree(data); - exit_release_region: - release_region(res->start + LM78_ADDR_REG_OFFSET, 2); - exit: - return err; -} - -static int __devexit lm78_isa_remove(struct platform_device *pdev) -{ - struct lm78_data *data = platform_get_drvdata(pdev); - struct resource *res; - - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&pdev->dev.kobj, &lm78_group); - device_remove_file(&pdev->dev, &dev_attr_name); - kfree(data); - - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - release_region(res->start + LM78_ADDR_REG_OFFSET, 2); +static const struct i2c_device_id lm78_i2c_id[] = { + { "lm78", lm78 }, + { "lm79", lm79 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm78_i2c_id); - return 0; -} +static struct i2c_driver lm78_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "lm78", + }, + .probe = lm78_i2c_probe, + .remove = lm78_i2c_remove, + .id_table = lm78_i2c_id, + .detect = lm78_i2c_detect, + .address_list = normal_i2c, +}; /* The SMBus locks itself, but ISA access must be locked explicitly! We don't want to lock the whole ISA bus, so we lock each client @@ -743,6 +678,7 @@ static int lm78_read_value(struct lm78_data *data, u8 reg) { struct i2c_client *client = data->client; +#ifdef CONFIG_ISA if (!client) { /* ISA device */ int res; mutex_lock(&data->lock); @@ -751,6 +687,7 @@ static int lm78_read_value(struct lm78_data *data, u8 reg) mutex_unlock(&data->lock); return res; } else +#endif return i2c_smbus_read_byte_data(client, reg); } @@ -765,6 +702,7 @@ static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value) { struct i2c_client *client = data->client; +#ifdef CONFIG_ISA if (!client) { /* ISA device */ mutex_lock(&data->lock); outb_p(reg, data->isa_addr + LM78_ADDR_REG_OFFSET); @@ -772,6 +710,7 @@ static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value) mutex_unlock(&data->lock); return 0; } else +#endif return i2c_smbus_write_byte_data(client, reg, value); } @@ -849,6 +788,88 @@ static struct lm78_data *lm78_update_device(struct device *dev) return data; } +#ifdef CONFIG_ISA +static int __devinit lm78_isa_probe(struct platform_device *pdev) +{ + int err; + struct lm78_data *data; + struct resource *res; + + /* Reserve the ISA region */ + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!request_region(res->start + LM78_ADDR_REG_OFFSET, 2, "lm78")) { + err = -EBUSY; + goto exit; + } + + data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit_release_region; + } + mutex_init(&data->lock); + data->isa_addr = res->start; + platform_set_drvdata(pdev, data); + + if (lm78_read_value(data, LM78_REG_CHIPID) & 0x80) { + data->type = lm79; + data->name = "lm79"; + } else { + data->type = lm78; + data->name = "lm78"; + } + + /* Initialize the LM78 chip */ + lm78_init_device(data); + + /* Register sysfs hooks */ + if ((err = sysfs_create_group(&pdev->dev.kobj, &lm78_group)) + || (err = device_create_file(&pdev->dev, &dev_attr_name))) + goto exit_remove_files; + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove_files; + } + + return 0; + + exit_remove_files: + sysfs_remove_group(&pdev->dev.kobj, &lm78_group); + device_remove_file(&pdev->dev, &dev_attr_name); + kfree(data); + exit_release_region: + release_region(res->start + LM78_ADDR_REG_OFFSET, 2); + exit: + return err; +} + +static int __devexit lm78_isa_remove(struct platform_device *pdev) +{ + struct lm78_data *data = platform_get_drvdata(pdev); + struct resource *res; + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&pdev->dev.kobj, &lm78_group); + device_remove_file(&pdev->dev, &dev_attr_name); + kfree(data); + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + release_region(res->start + LM78_ADDR_REG_OFFSET, 2); + + return 0; +} + +static struct platform_driver lm78_isa_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "lm78", + }, + .probe = lm78_isa_probe, + .remove = __devexit_p(lm78_isa_remove), +}; + /* return 1 if a supported chip is found, 0 otherwise */ static int __init lm78_isa_found(unsigned short address) { @@ -969,12 +990,10 @@ static int __init lm78_isa_device_add(unsigned short address) return err; } -static int __init sm_lm78_init(void) +static int __init lm78_isa_register(void) { int res; - /* We register the ISA device first, so that we can skip the - * registration of an I2C interface to the same device. */ if (lm78_isa_found(isa_address)) { res = platform_driver_register(&lm78_isa_driver); if (res) @@ -986,32 +1005,62 @@ static int __init sm_lm78_init(void) goto exit_unreg_isa_driver; } - res = i2c_add_driver(&lm78_driver); - if (res) - goto exit_unreg_isa_device; - return 0; - exit_unreg_isa_device: - platform_device_unregister(pdev); exit_unreg_isa_driver: platform_driver_unregister(&lm78_isa_driver); exit: return res; } -static void __exit sm_lm78_exit(void) +static void lm78_isa_unregister(void) { if (pdev) { platform_device_unregister(pdev); platform_driver_unregister(&lm78_isa_driver); } - i2c_del_driver(&lm78_driver); } +#else /* !CONFIG_ISA */ +static int __init lm78_isa_register(void) +{ + return 0; +} + +static void lm78_isa_unregister(void) +{ +} +#endif /* CONFIG_ISA */ +static int __init sm_lm78_init(void) +{ + int res; + + /* We register the ISA device first, so that we can skip the + * registration of an I2C interface to the same device. */ + res = lm78_isa_register(); + if (res) + goto exit; + + res = i2c_add_driver(&lm78_driver); + if (res) + goto exit_unreg_isa_device; + + return 0; + + exit_unreg_isa_device: + lm78_isa_unregister(); + exit: + return res; +} + +static void __exit sm_lm78_exit(void) +{ + lm78_isa_unregister(); + i2c_del_driver(&lm78_driver); +} -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); +MODULE_AUTHOR("Frodo Looijaard, Jean Delvare <khali@linux-fr.org>"); MODULE_DESCRIPTION("LM78/LM79 driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c index 14335bbc9bd..c97b78ef911 100644 --- a/drivers/hwmon/max1111.c +++ b/drivers/hwmon/max1111.c @@ -38,8 +38,8 @@ struct max1111_data { struct device *hwmon_dev; struct spi_message msg; struct spi_transfer xfer[2]; - uint8_t *tx_buf; - uint8_t *rx_buf; + uint8_t tx_buf[MAX1111_TX_BUF_SIZE]; + uint8_t rx_buf[MAX1111_RX_BUF_SIZE]; struct mutex drvdata_lock; /* protect msg, xfer and buffers from multiple access */ }; @@ -131,33 +131,23 @@ static const struct attribute_group max1111_attr_group = { .attrs = max1111_attributes, }; -static int setup_transfer(struct max1111_data *data) +static int __devinit setup_transfer(struct max1111_data *data) { struct spi_message *m; struct spi_transfer *x; - data->tx_buf = kmalloc(MAX1111_TX_BUF_SIZE, GFP_KERNEL); - if (!data->tx_buf) - return -ENOMEM; - - data->rx_buf = kmalloc(MAX1111_RX_BUF_SIZE, GFP_KERNEL); - if (!data->rx_buf) { - kfree(data->tx_buf); - return -ENOMEM; - } - m = &data->msg; x = &data->xfer[0]; spi_message_init(m); x->tx_buf = &data->tx_buf[0]; - x->len = 1; + x->len = MAX1111_TX_BUF_SIZE; spi_message_add_tail(x, m); x++; x->rx_buf = &data->rx_buf[0]; - x->len = 2; + x->len = MAX1111_RX_BUF_SIZE; spi_message_add_tail(x, m); return 0; @@ -192,7 +182,7 @@ static int __devinit max1111_probe(struct spi_device *spi) err = sysfs_create_group(&spi->dev.kobj, &max1111_attr_group); if (err) { dev_err(&spi->dev, "failed to create attribute group\n"); - goto err_free_all; + goto err_free_data; } data->hwmon_dev = hwmon_device_register(&spi->dev); @@ -209,9 +199,6 @@ static int __devinit max1111_probe(struct spi_device *spi) err_remove: sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group); -err_free_all: - kfree(data->rx_buf); - kfree(data->tx_buf); err_free_data: kfree(data); return err; @@ -224,8 +211,6 @@ static int __devexit max1111_remove(struct spi_device *spi) hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group); mutex_destroy(&data->drvdata_lock); - kfree(data->rx_buf); - kfree(data->tx_buf); kfree(data); return 0; } diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index 3494a4cce41..e3b5c6039c2 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -28,33 +28,15 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/io.h> -#include <linux/acpi.h> -#include <linux/delay.h> +#include "sch56xx-common.h" #define DRVNAME "sch5627" #define DEVNAME DRVNAME /* We only support one model */ -#define SIO_SCH5627_EM_LD 0x0C /* Embedded Microcontroller LD */ -#define SIO_UNLOCK_KEY 0x55 /* Key to enable Super-I/O */ -#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ - -#define SIO_REG_LDSEL 0x07 /* Logical device select */ -#define SIO_REG_DEVID 0x20 /* Device ID */ -#define SIO_REG_ENABLE 0x30 /* Logical device enable */ -#define SIO_REG_ADDR 0x66 /* Logical device address (2 bytes) */ - -#define SIO_SCH5627_ID 0xC6 /* Chipset ID */ - -#define REGION_LENGTH 9 - #define SCH5627_HWMON_ID 0xa5 #define SCH5627_COMPANY_ID 0x5c #define SCH5627_PRIMARY_ID 0xa0 -#define SCH5627_CMD_READ 0x02 -#define SCH5627_CMD_WRITE 0x03 - #define SCH5627_REG_BUILD_CODE 0x39 #define SCH5627_REG_BUILD_ID 0x3a #define SCH5627_REG_HWMON_ID 0x3c @@ -111,182 +93,6 @@ struct sch5627_data { u16 in[SCH5627_NO_IN]; }; -static struct platform_device *sch5627_pdev; - -/* Super I/O functions */ -static inline int superio_inb(int base, int reg) -{ - outb(reg, base); - return inb(base + 1); -} - -static inline int superio_enter(int base) -{ - /* Don't step on other drivers' I/O space by accident */ - if (!request_muxed_region(base, 2, DRVNAME)) { - pr_err("I/O address 0x%04x already in use\n", base); - return -EBUSY; - } - - outb(SIO_UNLOCK_KEY, base); - - return 0; -} - -static inline void superio_select(int base, int ld) -{ - outb(SIO_REG_LDSEL, base); - outb(ld, base + 1); -} - -static inline void superio_exit(int base) -{ - outb(SIO_LOCK_KEY, base); - release_region(base, 2); -} - -static int sch5627_send_cmd(struct sch5627_data *data, u8 cmd, u16 reg, u8 v) -{ - u8 val; - int i; - /* - * According to SMSC for the commands we use the maximum time for - * the EM to respond is 15 ms, but testing shows in practice it - * responds within 15-32 reads, so we first busy poll, and if - * that fails sleep a bit and try again until we are way past - * the 15 ms maximum response time. - */ - const int max_busy_polls = 64; - const int max_lazy_polls = 32; - - /* (Optional) Write-Clear the EC to Host Mailbox Register */ - val = inb(data->addr + 1); - outb(val, data->addr + 1); - - /* Set Mailbox Address Pointer to first location in Region 1 */ - outb(0x00, data->addr + 2); - outb(0x80, data->addr + 3); - - /* Write Request Packet Header */ - outb(cmd, data->addr + 4); /* VREG Access Type read:0x02 write:0x03 */ - outb(0x01, data->addr + 5); /* # of Entries: 1 Byte (8-bit) */ - outb(0x04, data->addr + 2); /* Mailbox AP to first data entry loc. */ - - /* Write Value field */ - if (cmd == SCH5627_CMD_WRITE) - outb(v, data->addr + 4); - - /* Write Address field */ - outb(reg & 0xff, data->addr + 6); - outb(reg >> 8, data->addr + 7); - - /* Execute the Random Access Command */ - outb(0x01, data->addr); /* Write 01h to the Host-to-EC register */ - - /* EM Interface Polling "Algorithm" */ - for (i = 0; i < max_busy_polls + max_lazy_polls; i++) { - if (i >= max_busy_polls) - msleep(1); - /* Read Interrupt source Register */ - val = inb(data->addr + 8); - /* Write Clear the interrupt source bits */ - if (val) - outb(val, data->addr + 8); - /* Command Completed ? */ - if (val & 0x01) - break; - } - if (i == max_busy_polls + max_lazy_polls) { - pr_err("Max retries exceeded reading virtual " - "register 0x%04hx (%d)\n", reg, 1); - return -EIO; - } - - /* - * According to SMSC we may need to retry this, but sofar I've always - * seen this succeed in 1 try. - */ - for (i = 0; i < max_busy_polls; i++) { - /* Read EC-to-Host Register */ - val = inb(data->addr + 1); - /* Command Completed ? */ - if (val == 0x01) - break; - - if (i == 0) - pr_warn("EC reports: 0x%02x reading virtual register " - "0x%04hx\n", (unsigned int)val, reg); - } - if (i == max_busy_polls) { - pr_err("Max retries exceeded reading virtual " - "register 0x%04hx (%d)\n", reg, 2); - return -EIO; - } - - /* - * According to the SMSC app note we should now do: - * - * Set Mailbox Address Pointer to first location in Region 1 * - * outb(0x00, data->addr + 2); - * outb(0x80, data->addr + 3); - * - * But if we do that things don't work, so let's not. - */ - - /* Read Value field */ - if (cmd == SCH5627_CMD_READ) - return inb(data->addr + 4); - - return 0; -} - -static int sch5627_read_virtual_reg(struct sch5627_data *data, u16 reg) -{ - return sch5627_send_cmd(data, SCH5627_CMD_READ, reg, 0); -} - -static int sch5627_write_virtual_reg(struct sch5627_data *data, - u16 reg, u8 val) -{ - return sch5627_send_cmd(data, SCH5627_CMD_WRITE, reg, val); -} - -static int sch5627_read_virtual_reg16(struct sch5627_data *data, u16 reg) -{ - int lsb, msb; - - /* Read LSB first, this will cause the matching MSB to be latched */ - lsb = sch5627_read_virtual_reg(data, reg); - if (lsb < 0) - return lsb; - - msb = sch5627_read_virtual_reg(data, reg + 1); - if (msb < 0) - return msb; - - return lsb | (msb << 8); -} - -static int sch5627_read_virtual_reg12(struct sch5627_data *data, u16 msb_reg, - u16 lsn_reg, int high_nibble) -{ - int msb, lsn; - - /* Read MSB first, this will cause the matching LSN to be latched */ - msb = sch5627_read_virtual_reg(data, msb_reg); - if (msb < 0) - return msb; - - lsn = sch5627_read_virtual_reg(data, lsn_reg); - if (lsn < 0) - return lsn; - - if (high_nibble) - return (msb << 4) | (lsn >> 4); - else - return (msb << 4) | (lsn & 0x0f); -} - static struct sch5627_data *sch5627_update_device(struct device *dev) { struct sch5627_data *data = dev_get_drvdata(dev); @@ -297,7 +103,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev) /* Trigger a Vbat voltage measurement every 5 minutes */ if (time_after(jiffies, data->last_battery + 300 * HZ)) { - sch5627_write_virtual_reg(data, SCH5627_REG_CTRL, + sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL, data->control | 0x10); data->last_battery = jiffies; } @@ -305,7 +111,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev) /* Cache the values for 1 second */ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { for (i = 0; i < SCH5627_NO_TEMPS; i++) { - val = sch5627_read_virtual_reg12(data, + val = sch56xx_read_virtual_reg12(data->addr, SCH5627_REG_TEMP_MSB[i], SCH5627_REG_TEMP_LSN[i], SCH5627_REG_TEMP_HIGH_NIBBLE[i]); @@ -317,7 +123,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev) } for (i = 0; i < SCH5627_NO_FANS; i++) { - val = sch5627_read_virtual_reg16(data, + val = sch56xx_read_virtual_reg16(data->addr, SCH5627_REG_FAN[i]); if (unlikely(val < 0)) { ret = ERR_PTR(val); @@ -327,7 +133,7 @@ static struct sch5627_data *sch5627_update_device(struct device *dev) } for (i = 0; i < SCH5627_NO_IN; i++) { - val = sch5627_read_virtual_reg12(data, + val = sch56xx_read_virtual_reg12(data->addr, SCH5627_REG_IN_MSB[i], SCH5627_REG_IN_LSN[i], SCH5627_REG_IN_HIGH_NIBBLE[i]); @@ -355,18 +161,21 @@ static int __devinit sch5627_read_limits(struct sch5627_data *data) * Note what SMSC calls ABS, is what lm_sensors calls max * (aka high), and HIGH is what lm_sensors calls crit. */ - val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_ABS[i]); + val = sch56xx_read_virtual_reg(data->addr, + SCH5627_REG_TEMP_ABS[i]); if (val < 0) return val; data->temp_max[i] = val; - val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_HIGH[i]); + val = sch56xx_read_virtual_reg(data->addr, + SCH5627_REG_TEMP_HIGH[i]); if (val < 0) return val; data->temp_crit[i] = val; } for (i = 0; i < SCH5627_NO_FANS; i++) { - val = sch5627_read_virtual_reg16(data, SCH5627_REG_FAN_MIN[i]); + val = sch56xx_read_virtual_reg16(data->addr, + SCH5627_REG_FAN_MIN[i]); if (val < 0) return val; data->fan_min[i] = val; @@ -667,7 +476,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev) mutex_init(&data->update_lock); platform_set_drvdata(pdev, data); - val = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_ID); + val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID); if (val < 0) { err = val; goto error; @@ -679,7 +488,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev) goto error; } - val = sch5627_read_virtual_reg(data, SCH5627_REG_COMPANY_ID); + val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID); if (val < 0) { err = val; goto error; @@ -691,7 +500,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev) goto error; } - val = sch5627_read_virtual_reg(data, SCH5627_REG_PRIMARY_ID); + val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID); if (val < 0) { err = val; goto error; @@ -703,25 +512,28 @@ static int __devinit sch5627_probe(struct platform_device *pdev) goto error; } - build_code = sch5627_read_virtual_reg(data, SCH5627_REG_BUILD_CODE); + build_code = sch56xx_read_virtual_reg(data->addr, + SCH5627_REG_BUILD_CODE); if (build_code < 0) { err = build_code; goto error; } - build_id = sch5627_read_virtual_reg16(data, SCH5627_REG_BUILD_ID); + build_id = sch56xx_read_virtual_reg16(data->addr, + SCH5627_REG_BUILD_ID); if (build_id < 0) { err = build_id; goto error; } - hwmon_rev = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_REV); + hwmon_rev = sch56xx_read_virtual_reg(data->addr, + SCH5627_REG_HWMON_REV); if (hwmon_rev < 0) { err = hwmon_rev; goto error; } - val = sch5627_read_virtual_reg(data, SCH5627_REG_CTRL); + val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL); if (val < 0) { err = val; goto error; @@ -734,7 +546,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev) } /* Trigger a Vbat voltage measurement, so that we get a valid reading the first time we read Vbat */ - sch5627_write_virtual_reg(data, SCH5627_REG_CTRL, + sch56xx_write_virtual_reg(data->addr, SCH5627_REG_CTRL, data->control | 0x10); data->last_battery = jiffies; @@ -746,6 +558,7 @@ static int __devinit sch5627_probe(struct platform_device *pdev) if (err) goto error; + pr_info("found %s chip at %#hx\n", DEVNAME, data->addr); pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n", build_code, build_id, hwmon_rev); @@ -768,85 +581,6 @@ error: return err; } -static int __init sch5627_find(int sioaddr, unsigned short *address) -{ - u8 devid; - int err = superio_enter(sioaddr); - if (err) - return err; - - devid = superio_inb(sioaddr, SIO_REG_DEVID); - if (devid != SIO_SCH5627_ID) { - pr_debug("Unsupported device id: 0x%02x\n", - (unsigned int)devid); - err = -ENODEV; - goto exit; - } - - superio_select(sioaddr, SIO_SCH5627_EM_LD); - - if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) { - pr_warn("Device not activated\n"); - err = -ENODEV; - goto exit; - } - - /* - * Warning the order of the low / high byte is the other way around - * as on most other superio devices!! - */ - *address = superio_inb(sioaddr, SIO_REG_ADDR) | - superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8; - if (*address == 0) { - pr_warn("Base address not set\n"); - err = -ENODEV; - goto exit; - } - - pr_info("Found %s chip at %#hx\n", DEVNAME, *address); -exit: - superio_exit(sioaddr); - return err; -} - -static int __init sch5627_device_add(unsigned short address) -{ - struct resource res = { - .start = address, - .end = address + REGION_LENGTH - 1, - .flags = IORESOURCE_IO, - }; - int err; - - sch5627_pdev = platform_device_alloc(DRVNAME, address); - if (!sch5627_pdev) - return -ENOMEM; - - res.name = sch5627_pdev->name; - err = acpi_check_resource_conflict(&res); - if (err) - goto exit_device_put; - - err = platform_device_add_resources(sch5627_pdev, &res, 1); - if (err) { - pr_err("Device resource addition failed\n"); - goto exit_device_put; - } - - err = platform_device_add(sch5627_pdev); - if (err) { - pr_err("Device addition failed\n"); - goto exit_device_put; - } - - return 0; - -exit_device_put: - platform_device_put(sch5627_pdev); - - return err; -} - static struct platform_driver sch5627_driver = { .driver = { .owner = THIS_MODULE, @@ -858,31 +592,11 @@ static struct platform_driver sch5627_driver = { static int __init sch5627_init(void) { - int err = -ENODEV; - unsigned short address; - - if (sch5627_find(0x4e, &address) && sch5627_find(0x2e, &address)) - goto exit; - - err = platform_driver_register(&sch5627_driver); - if (err) - goto exit; - - err = sch5627_device_add(address); - if (err) - goto exit_driver; - - return 0; - -exit_driver: - platform_driver_unregister(&sch5627_driver); -exit: - return err; + return platform_driver_register(&sch5627_driver); } static void __exit sch5627_exit(void) { - platform_device_unregister(sch5627_pdev); platform_driver_unregister(&sch5627_driver); } diff --git a/drivers/hwmon/sch5636.c b/drivers/hwmon/sch5636.c new file mode 100644 index 00000000000..244407aa79f --- /dev/null +++ b/drivers/hwmon/sch5636.c @@ -0,0 +1,539 @@ +/*************************************************************************** + * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include "sch56xx-common.h" + +#define DRVNAME "sch5636" +#define DEVNAME "theseus" /* We only support one model for now */ + +#define SCH5636_REG_FUJITSU_ID 0x780 +#define SCH5636_REG_FUJITSU_REV 0x783 + +#define SCH5636_NO_INS 5 +#define SCH5636_NO_TEMPS 16 +#define SCH5636_NO_FANS 8 + +static const u16 SCH5636_REG_IN_VAL[SCH5636_NO_INS] = { + 0x22, 0x23, 0x24, 0x25, 0x189 }; +static const u16 SCH5636_REG_IN_FACTORS[SCH5636_NO_INS] = { + 4400, 1500, 4000, 4400, 16000 }; +static const char * const SCH5636_IN_LABELS[SCH5636_NO_INS] = { + "3.3V", "VREF", "VBAT", "3.3AUX", "12V" }; + +static const u16 SCH5636_REG_TEMP_VAL[SCH5636_NO_TEMPS] = { + 0x2B, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x180, 0x181, + 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C }; +#define SCH5636_REG_TEMP_CTRL(i) (0x790 + (i)) +#define SCH5636_TEMP_WORKING 0x01 +#define SCH5636_TEMP_ALARM 0x02 +#define SCH5636_TEMP_DEACTIVATED 0x80 + +static const u16 SCH5636_REG_FAN_VAL[SCH5636_NO_FANS] = { + 0x2C, 0x2E, 0x30, 0x32, 0x62, 0x64, 0x66, 0x68 }; +#define SCH5636_REG_FAN_CTRL(i) (0x880 + (i)) +/* FAULT in datasheet, but acts as an alarm */ +#define SCH5636_FAN_ALARM 0x04 +#define SCH5636_FAN_NOT_PRESENT 0x08 +#define SCH5636_FAN_DEACTIVATED 0x80 + + +struct sch5636_data { + unsigned short addr; + struct device *hwmon_dev; + + struct mutex update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + u8 in[SCH5636_NO_INS]; + u8 temp_val[SCH5636_NO_TEMPS]; + u8 temp_ctrl[SCH5636_NO_TEMPS]; + u16 fan_val[SCH5636_NO_FANS]; + u8 fan_ctrl[SCH5636_NO_FANS]; +}; + +static struct sch5636_data *sch5636_update_device(struct device *dev) +{ + struct sch5636_data *data = dev_get_drvdata(dev); + struct sch5636_data *ret = data; + int i, val; + + mutex_lock(&data->update_lock); + + /* Cache the values for 1 second */ + if (data->valid && !time_after(jiffies, data->last_updated + HZ)) + goto abort; + + for (i = 0; i < SCH5636_NO_INS; i++) { + val = sch56xx_read_virtual_reg(data->addr, + SCH5636_REG_IN_VAL[i]); + if (unlikely(val < 0)) { + ret = ERR_PTR(val); + goto abort; + } + data->in[i] = val; + } + + for (i = 0; i < SCH5636_NO_TEMPS; i++) { + if (data->temp_ctrl[i] & SCH5636_TEMP_DEACTIVATED) + continue; + + val = sch56xx_read_virtual_reg(data->addr, + SCH5636_REG_TEMP_VAL[i]); + if (unlikely(val < 0)) { + ret = ERR_PTR(val); + goto abort; + } + data->temp_val[i] = val; + + val = sch56xx_read_virtual_reg(data->addr, + SCH5636_REG_TEMP_CTRL(i)); + if (unlikely(val < 0)) { + ret = ERR_PTR(val); + goto abort; + } + data->temp_ctrl[i] = val; + /* Alarms need to be explicitly write-cleared */ + if (val & SCH5636_TEMP_ALARM) { + sch56xx_write_virtual_reg(data->addr, + SCH5636_REG_TEMP_CTRL(i), val); + } + } + + for (i = 0; i < SCH5636_NO_FANS; i++) { + if (data->fan_ctrl[i] & SCH5636_FAN_DEACTIVATED) + continue; + + val = sch56xx_read_virtual_reg16(data->addr, + SCH5636_REG_FAN_VAL[i]); + if (unlikely(val < 0)) { + ret = ERR_PTR(val); + goto abort; + } + data->fan_val[i] = val; + + val = sch56xx_read_virtual_reg(data->addr, + SCH5636_REG_FAN_CTRL(i)); + if (unlikely(val < 0)) { + ret = ERR_PTR(val); + goto abort; + } + data->fan_ctrl[i] = val; + /* Alarms need to be explicitly write-cleared */ + if (val & SCH5636_FAN_ALARM) { + sch56xx_write_virtual_reg(data->addr, + SCH5636_REG_FAN_CTRL(i), val); + } + } + + data->last_updated = jiffies; + data->valid = 1; +abort: + mutex_unlock(&data->update_lock); + return ret; +} + +static int reg_to_rpm(u16 reg) +{ + if (reg == 0) + return -EIO; + if (reg == 0xffff) + return 0; + + return 5400540 / reg; +} + +static ssize_t show_name(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", DEVNAME); +} + +static ssize_t show_in_value(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5636_data *data = sch5636_update_device(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = DIV_ROUND_CLOSEST( + data->in[attr->index] * SCH5636_REG_IN_FACTORS[attr->index], + 255); + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_in_label(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return snprintf(buf, PAGE_SIZE, "%s\n", + SCH5636_IN_LABELS[attr->index]); +} + +static ssize_t show_temp_value(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5636_data *data = sch5636_update_device(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = (data->temp_val[attr->index] - 64) * 1000; + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_temp_fault(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5636_data *data = sch5636_update_device(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = (data->temp_ctrl[attr->index] & SCH5636_TEMP_WORKING) ? 0 : 1; + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_temp_alarm(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5636_data *data = sch5636_update_device(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = (data->temp_ctrl[attr->index] & SCH5636_TEMP_ALARM) ? 1 : 0; + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_fan_value(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5636_data *data = sch5636_update_device(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = reg_to_rpm(data->fan_val[attr->index]); + if (val < 0) + return val; + + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_fan_fault(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5636_data *data = sch5636_update_device(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = (data->fan_ctrl[attr->index] & SCH5636_FAN_NOT_PRESENT) ? 1 : 0; + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_fan_alarm(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5636_data *data = sch5636_update_device(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = (data->fan_ctrl[attr->index] & SCH5636_FAN_ALARM) ? 1 : 0; + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static struct sensor_device_attribute sch5636_attr[] = { + SENSOR_ATTR(name, 0444, show_name, NULL, 0), + SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0), + SENSOR_ATTR(in0_label, 0444, show_in_label, NULL, 0), + SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1), + SENSOR_ATTR(in1_label, 0444, show_in_label, NULL, 1), + SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2), + SENSOR_ATTR(in2_label, 0444, show_in_label, NULL, 2), + SENSOR_ATTR(in3_input, 0444, show_in_value, NULL, 3), + SENSOR_ATTR(in3_label, 0444, show_in_label, NULL, 3), + SENSOR_ATTR(in4_input, 0444, show_in_value, NULL, 4), + SENSOR_ATTR(in4_label, 0444, show_in_label, NULL, 4), +}; + +static struct sensor_device_attribute sch5636_temp_attr[] = { + SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0), + SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0), + SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0), + SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1), + SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1), + SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1), + SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2), + SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2), + SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2), + SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3), + SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3), + SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3), + SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4), + SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4), + SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4), + SENSOR_ATTR(temp6_input, 0444, show_temp_value, NULL, 5), + SENSOR_ATTR(temp6_fault, 0444, show_temp_fault, NULL, 5), + SENSOR_ATTR(temp6_alarm, 0444, show_temp_alarm, NULL, 5), + SENSOR_ATTR(temp7_input, 0444, show_temp_value, NULL, 6), + SENSOR_ATTR(temp7_fault, 0444, show_temp_fault, NULL, 6), + SENSOR_ATTR(temp7_alarm, 0444, show_temp_alarm, NULL, 6), + SENSOR_ATTR(temp8_input, 0444, show_temp_value, NULL, 7), + SENSOR_ATTR(temp8_fault, 0444, show_temp_fault, NULL, 7), + SENSOR_ATTR(temp8_alarm, 0444, show_temp_alarm, NULL, 7), + SENSOR_ATTR(temp9_input, 0444, show_temp_value, NULL, 8), + SENSOR_ATTR(temp9_fault, 0444, show_temp_fault, NULL, 8), + SENSOR_ATTR(temp9_alarm, 0444, show_temp_alarm, NULL, 8), + SENSOR_ATTR(temp10_input, 0444, show_temp_value, NULL, 9), + SENSOR_ATTR(temp10_fault, 0444, show_temp_fault, NULL, 9), + SENSOR_ATTR(temp10_alarm, 0444, show_temp_alarm, NULL, 9), + SENSOR_ATTR(temp11_input, 0444, show_temp_value, NULL, 10), + SENSOR_ATTR(temp11_fault, 0444, show_temp_fault, NULL, 10), + SENSOR_ATTR(temp11_alarm, 0444, show_temp_alarm, NULL, 10), + SENSOR_ATTR(temp12_input, 0444, show_temp_value, NULL, 11), + SENSOR_ATTR(temp12_fault, 0444, show_temp_fault, NULL, 11), + SENSOR_ATTR(temp12_alarm, 0444, show_temp_alarm, NULL, 11), + SENSOR_ATTR(temp13_input, 0444, show_temp_value, NULL, 12), + SENSOR_ATTR(temp13_fault, 0444, show_temp_fault, NULL, 12), + SENSOR_ATTR(temp13_alarm, 0444, show_temp_alarm, NULL, 12), + SENSOR_ATTR(temp14_input, 0444, show_temp_value, NULL, 13), + SENSOR_ATTR(temp14_fault, 0444, show_temp_fault, NULL, 13), + SENSOR_ATTR(temp14_alarm, 0444, show_temp_alarm, NULL, 13), + SENSOR_ATTR(temp15_input, 0444, show_temp_value, NULL, 14), + SENSOR_ATTR(temp15_fault, 0444, show_temp_fault, NULL, 14), + SENSOR_ATTR(temp15_alarm, 0444, show_temp_alarm, NULL, 14), + SENSOR_ATTR(temp16_input, 0444, show_temp_value, NULL, 15), + SENSOR_ATTR(temp16_fault, 0444, show_temp_fault, NULL, 15), + SENSOR_ATTR(temp16_alarm, 0444, show_temp_alarm, NULL, 15), +}; + +static struct sensor_device_attribute sch5636_fan_attr[] = { + SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0), + SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0), + SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0), + SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1), + SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1), + SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1), + SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2), + SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2), + SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2), + SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3), + SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3), + SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3), + SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4), + SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4), + SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4), + SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5), + SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5), + SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5), + SENSOR_ATTR(fan7_input, 0444, show_fan_value, NULL, 6), + SENSOR_ATTR(fan7_fault, 0444, show_fan_fault, NULL, 6), + SENSOR_ATTR(fan7_alarm, 0444, show_fan_alarm, NULL, 6), + SENSOR_ATTR(fan8_input, 0444, show_fan_value, NULL, 7), + SENSOR_ATTR(fan8_fault, 0444, show_fan_fault, NULL, 7), + SENSOR_ATTR(fan8_alarm, 0444, show_fan_alarm, NULL, 7), +}; + +static int sch5636_remove(struct platform_device *pdev) +{ + struct sch5636_data *data = platform_get_drvdata(pdev); + int i; + + if (data->hwmon_dev) + hwmon_device_unregister(data->hwmon_dev); + + for (i = 0; i < ARRAY_SIZE(sch5636_attr); i++) + device_remove_file(&pdev->dev, &sch5636_attr[i].dev_attr); + + for (i = 0; i < SCH5636_NO_TEMPS * 3; i++) + device_remove_file(&pdev->dev, + &sch5636_temp_attr[i].dev_attr); + + for (i = 0; i < SCH5636_NO_FANS * 3; i++) + device_remove_file(&pdev->dev, + &sch5636_fan_attr[i].dev_attr); + + platform_set_drvdata(pdev, NULL); + kfree(data); + + return 0; +} + +static int __devinit sch5636_probe(struct platform_device *pdev) +{ + struct sch5636_data *data; + int i, err, val, revision[2]; + char id[4]; + + data = kzalloc(sizeof(struct sch5636_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; + mutex_init(&data->update_lock); + platform_set_drvdata(pdev, data); + + for (i = 0; i < 3; i++) { + val = sch56xx_read_virtual_reg(data->addr, + SCH5636_REG_FUJITSU_ID + i); + if (val < 0) { + pr_err("Could not read Fujitsu id byte at %#x\n", + SCH5636_REG_FUJITSU_ID + i); + err = val; + goto error; + } + id[i] = val; + } + id[i] = '\0'; + + if (strcmp(id, "THS")) { + pr_err("Unknown Fujitsu id: %02x%02x%02x\n", + id[0], id[1], id[2]); + err = -ENODEV; + goto error; + } + + for (i = 0; i < 2; i++) { + val = sch56xx_read_virtual_reg(data->addr, + SCH5636_REG_FUJITSU_REV + i); + if (val < 0) { + err = val; + goto error; + } + revision[i] = val; + } + pr_info("Found %s chip at %#hx, revison: %d.%02d\n", DEVNAME, + data->addr, revision[0], revision[1]); + + /* Read all temp + fan ctrl registers to determine which are active */ + for (i = 0; i < SCH5636_NO_TEMPS; i++) { + val = sch56xx_read_virtual_reg(data->addr, + SCH5636_REG_TEMP_CTRL(i)); + if (unlikely(val < 0)) { + err = val; + goto error; + } + data->temp_ctrl[i] = val; + } + + for (i = 0; i < SCH5636_NO_FANS; i++) { + val = sch56xx_read_virtual_reg(data->addr, + SCH5636_REG_FAN_CTRL(i)); + if (unlikely(val < 0)) { + err = val; + goto error; + } + data->fan_ctrl[i] = val; + } + + for (i = 0; i < ARRAY_SIZE(sch5636_attr); i++) { + err = device_create_file(&pdev->dev, + &sch5636_attr[i].dev_attr); + if (err) + goto error; + } + + for (i = 0; i < (SCH5636_NO_TEMPS * 3); i++) { + if (data->temp_ctrl[i/3] & SCH5636_TEMP_DEACTIVATED) + continue; + + err = device_create_file(&pdev->dev, + &sch5636_temp_attr[i].dev_attr); + if (err) + goto error; + } + + for (i = 0; i < (SCH5636_NO_FANS * 3); i++) { + if (data->fan_ctrl[i/3] & SCH5636_FAN_DEACTIVATED) + continue; + + err = device_create_file(&pdev->dev, + &sch5636_fan_attr[i].dev_attr); + if (err) + goto error; + } + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + data->hwmon_dev = NULL; + goto error; + } + + return 0; + +error: + sch5636_remove(pdev); + return err; +} + +static struct platform_driver sch5636_driver = { + .driver = { + .owner = THIS_MODULE, + .name = DRVNAME, + }, + .probe = sch5636_probe, + .remove = sch5636_remove, +}; + +static int __init sch5636_init(void) +{ + return platform_driver_register(&sch5636_driver); +} + +static void __exit sch5636_exit(void) +{ + platform_driver_unregister(&sch5636_driver); +} + +MODULE_DESCRIPTION("SMSC SCH5636 Hardware Monitoring Driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL"); + +module_init(sch5636_init); +module_exit(sch5636_exit); diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c new file mode 100644 index 00000000000..fac32ee0b10 --- /dev/null +++ b/drivers/hwmon/sch56xx-common.c @@ -0,0 +1,340 @@ +/*************************************************************************** + * Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/acpi.h> +#include <linux/delay.h> +#include "sch56xx-common.h" + +#define SIO_SCH56XX_LD_EM 0x0C /* Embedded uController Logical Dev */ +#define SIO_UNLOCK_KEY 0x55 /* Key to enable Super-I/O */ +#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ + +#define SIO_REG_LDSEL 0x07 /* Logical device select */ +#define SIO_REG_DEVID 0x20 /* Device ID */ +#define SIO_REG_ENABLE 0x30 /* Logical device enable */ +#define SIO_REG_ADDR 0x66 /* Logical device address (2 bytes) */ + +#define SIO_SCH5627_ID 0xC6 /* Chipset ID */ +#define SIO_SCH5636_ID 0xC7 /* Chipset ID */ + +#define REGION_LENGTH 9 + +#define SCH56XX_CMD_READ 0x02 +#define SCH56XX_CMD_WRITE 0x03 + +static struct platform_device *sch56xx_pdev; + +/* Super I/O functions */ +static inline int superio_inb(int base, int reg) +{ + outb(reg, base); + return inb(base + 1); +} + +static inline int superio_enter(int base) +{ + /* Don't step on other drivers' I/O space by accident */ + if (!request_muxed_region(base, 2, "sch56xx")) { + pr_err("I/O address 0x%04x already in use\n", base); + return -EBUSY; + } + + outb(SIO_UNLOCK_KEY, base); + + return 0; +} + +static inline void superio_select(int base, int ld) +{ + outb(SIO_REG_LDSEL, base); + outb(ld, base + 1); +} + +static inline void superio_exit(int base) +{ + outb(SIO_LOCK_KEY, base); + release_region(base, 2); +} + +static int sch56xx_send_cmd(u16 addr, u8 cmd, u16 reg, u8 v) +{ + u8 val; + int i; + /* + * According to SMSC for the commands we use the maximum time for + * the EM to respond is 15 ms, but testing shows in practice it + * responds within 15-32 reads, so we first busy poll, and if + * that fails sleep a bit and try again until we are way past + * the 15 ms maximum response time. + */ + const int max_busy_polls = 64; + const int max_lazy_polls = 32; + + /* (Optional) Write-Clear the EC to Host Mailbox Register */ + val = inb(addr + 1); + outb(val, addr + 1); + + /* Set Mailbox Address Pointer to first location in Region 1 */ + outb(0x00, addr + 2); + outb(0x80, addr + 3); + + /* Write Request Packet Header */ + outb(cmd, addr + 4); /* VREG Access Type read:0x02 write:0x03 */ + outb(0x01, addr + 5); /* # of Entries: 1 Byte (8-bit) */ + outb(0x04, addr + 2); /* Mailbox AP to first data entry loc. */ + + /* Write Value field */ + if (cmd == SCH56XX_CMD_WRITE) + outb(v, addr + 4); + + /* Write Address field */ + outb(reg & 0xff, addr + 6); + outb(reg >> 8, addr + 7); + + /* Execute the Random Access Command */ + outb(0x01, addr); /* Write 01h to the Host-to-EC register */ + + /* EM Interface Polling "Algorithm" */ + for (i = 0; i < max_busy_polls + max_lazy_polls; i++) { + if (i >= max_busy_polls) + msleep(1); + /* Read Interrupt source Register */ + val = inb(addr + 8); + /* Write Clear the interrupt source bits */ + if (val) + outb(val, addr + 8); + /* Command Completed ? */ + if (val & 0x01) + break; + } + if (i == max_busy_polls + max_lazy_polls) { + pr_err("Max retries exceeded reading virtual " + "register 0x%04hx (%d)\n", reg, 1); + return -EIO; + } + + /* + * According to SMSC we may need to retry this, but sofar I've always + * seen this succeed in 1 try. + */ + for (i = 0; i < max_busy_polls; i++) { + /* Read EC-to-Host Register */ + val = inb(addr + 1); + /* Command Completed ? */ + if (val == 0x01) + break; + + if (i == 0) + pr_warn("EC reports: 0x%02x reading virtual register " + "0x%04hx\n", (unsigned int)val, reg); + } + if (i == max_busy_polls) { + pr_err("Max retries exceeded reading virtual " + "register 0x%04hx (%d)\n", reg, 2); + return -EIO; + } + + /* + * According to the SMSC app note we should now do: + * + * Set Mailbox Address Pointer to first location in Region 1 * + * outb(0x00, addr + 2); + * outb(0x80, addr + 3); + * + * But if we do that things don't work, so let's not. + */ + + /* Read Value field */ + if (cmd == SCH56XX_CMD_READ) + return inb(addr + 4); + + return 0; +} + +int sch56xx_read_virtual_reg(u16 addr, u16 reg) +{ + return sch56xx_send_cmd(addr, SCH56XX_CMD_READ, reg, 0); +} +EXPORT_SYMBOL(sch56xx_read_virtual_reg); + +int sch56xx_write_virtual_reg(u16 addr, u16 reg, u8 val) +{ + return sch56xx_send_cmd(addr, SCH56XX_CMD_WRITE, reg, val); +} +EXPORT_SYMBOL(sch56xx_write_virtual_reg); + +int sch56xx_read_virtual_reg16(u16 addr, u16 reg) +{ + int lsb, msb; + + /* Read LSB first, this will cause the matching MSB to be latched */ + lsb = sch56xx_read_virtual_reg(addr, reg); + if (lsb < 0) + return lsb; + + msb = sch56xx_read_virtual_reg(addr, reg + 1); + if (msb < 0) + return msb; + + return lsb | (msb << 8); +} +EXPORT_SYMBOL(sch56xx_read_virtual_reg16); + +int sch56xx_read_virtual_reg12(u16 addr, u16 msb_reg, u16 lsn_reg, + int high_nibble) +{ + int msb, lsn; + + /* Read MSB first, this will cause the matching LSN to be latched */ + msb = sch56xx_read_virtual_reg(addr, msb_reg); + if (msb < 0) + return msb; + + lsn = sch56xx_read_virtual_reg(addr, lsn_reg); + if (lsn < 0) + return lsn; + + if (high_nibble) + return (msb << 4) | (lsn >> 4); + else + return (msb << 4) | (lsn & 0x0f); +} +EXPORT_SYMBOL(sch56xx_read_virtual_reg12); + +static int __init sch56xx_find(int sioaddr, unsigned short *address, + const char **name) +{ + u8 devid; + int err; + + err = superio_enter(sioaddr); + if (err) + return err; + + devid = superio_inb(sioaddr, SIO_REG_DEVID); + switch (devid) { + case SIO_SCH5627_ID: + *name = "sch5627"; + break; + case SIO_SCH5636_ID: + *name = "sch5636"; + break; + default: + pr_debug("Unsupported device id: 0x%02x\n", + (unsigned int)devid); + err = -ENODEV; + goto exit; + } + + superio_select(sioaddr, SIO_SCH56XX_LD_EM); + + if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) { + pr_warn("Device not activated\n"); + err = -ENODEV; + goto exit; + } + + /* + * Warning the order of the low / high byte is the other way around + * as on most other superio devices!! + */ + *address = superio_inb(sioaddr, SIO_REG_ADDR) | + superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8; + if (*address == 0) { + pr_warn("Base address not set\n"); + err = -ENODEV; + goto exit; + } + +exit: + superio_exit(sioaddr); + return err; +} + +static int __init sch56xx_device_add(unsigned short address, const char *name) +{ + struct resource res = { + .start = address, + .end = address + REGION_LENGTH - 1, + .flags = IORESOURCE_IO, + }; + int err; + + sch56xx_pdev = platform_device_alloc(name, address); + if (!sch56xx_pdev) + return -ENOMEM; + + res.name = sch56xx_pdev->name; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit_device_put; + + err = platform_device_add_resources(sch56xx_pdev, &res, 1); + if (err) { + pr_err("Device resource addition failed\n"); + goto exit_device_put; + } + + err = platform_device_add(sch56xx_pdev); + if (err) { + pr_err("Device addition failed\n"); + goto exit_device_put; + } + + return 0; + +exit_device_put: + platform_device_put(sch56xx_pdev); + + return err; +} + +static int __init sch56xx_init(void) +{ + int err; + unsigned short address; + const char *name; + + err = sch56xx_find(0x4e, &address, &name); + if (err) + err = sch56xx_find(0x2e, &address, &name); + if (err) + return err; + + return sch56xx_device_add(address, name); +} + +static void __exit sch56xx_exit(void) +{ + platform_device_unregister(sch56xx_pdev); +} + +MODULE_DESCRIPTION("SMSC SCH56xx Hardware Monitoring Common Code"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL"); + +module_init(sch56xx_init); +module_exit(sch56xx_exit); diff --git a/drivers/hwmon/sch56xx-common.h b/drivers/hwmon/sch56xx-common.h new file mode 100644 index 00000000000..d5eaf3b9ebf --- /dev/null +++ b/drivers/hwmon/sch56xx-common.h @@ -0,0 +1,24 @@ +/*************************************************************************** + * Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +int sch56xx_read_virtual_reg(u16 addr, u16 reg); +int sch56xx_write_virtual_reg(u16 addr, u16 reg, u8 val); +int sch56xx_read_virtual_reg16(u16 addr, u16 reg); +int sch56xx_read_virtual_reg12(u16 addr, u16 msb_reg, u16 lsn_reg, + int high_nibble); diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index cf4330b352e..7d231cf5d2c 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -671,7 +671,7 @@ static ssize_t sht15_show_status(struct device *dev, * @buf: sysfs buffer to read the new heater state from. * @count: length of the data. * - * Will be called on read access to heater_enable sysfs attribute. + * Will be called on write access to heater_enable sysfs attribute. * Returns number of bytes actually decoded, negative errno on error. */ static ssize_t sht15_store_heater(struct device *dev, diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c index 0d18de424c6..8eac67d769f 100644 --- a/drivers/hwmon/via-cputemp.c +++ b/drivers/hwmon/via-cputemp.c @@ -27,6 +27,7 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/hwmon.h> +#include <linux/hwmon-vid.h> #include <linux/sysfs.h> #include <linux/hwmon-sysfs.h> #include <linux/err.h> @@ -48,8 +49,10 @@ enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME }; struct via_cputemp_data { struct device *hwmon_dev; const char *name; + u8 vrm; u32 id; - u32 msr; + u32 msr_temp; + u32 msr_vid; }; /* @@ -77,13 +80,27 @@ static ssize_t show_temp(struct device *dev, u32 eax, edx; int err; - err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx); + err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx); if (err) return -EAGAIN; return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000); } +static ssize_t show_cpu_vid(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct via_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr_vid, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%d\n", vid_from_reg(~edx & 0x7f, data->vrm)); +} + static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, SHOW_TEMP); static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL); @@ -100,6 +117,9 @@ static const struct attribute_group via_cputemp_group = { .attrs = via_cputemp_attributes, }; +/* Optional attributes */ +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_cpu_vid, NULL); + static int __devinit via_cputemp_probe(struct platform_device *pdev) { struct via_cputemp_data *data; @@ -122,11 +142,12 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev) /* C7 A */ case 0xD: /* C7 D */ - data->msr = 0x1169; + data->msr_temp = 0x1169; + data->msr_vid = 0x198; break; case 0xF: /* Nano */ - data->msr = 0x1423; + data->msr_temp = 0x1423; break; default: err = -ENODEV; @@ -134,7 +155,7 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev) } /* test if we can access the TEMPERATURE MSR */ - err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx); + err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx); if (err) { dev_err(&pdev->dev, "Unable to access TEMPERATURE MSR, giving up\n"); @@ -147,6 +168,15 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev) if (err) goto exit_free; + if (data->msr_vid) + data->vrm = vid_which_vrm(); + + if (data->vrm) { + err = device_create_file(&pdev->dev, &dev_attr_cpu0_vid); + if (err) + goto exit_remove; + } + data->hwmon_dev = hwmon_device_register(&pdev->dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); @@ -158,6 +188,8 @@ static int __devinit via_cputemp_probe(struct platform_device *pdev) return 0; exit_remove: + if (data->vrm) + device_remove_file(&pdev->dev, &dev_attr_cpu0_vid); sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group); exit_free: platform_set_drvdata(pdev, NULL); @@ -171,6 +203,8 @@ static int __devexit via_cputemp_remove(struct platform_device *pdev) struct via_cputemp_data *data = platform_get_drvdata(pdev); hwmon_device_unregister(data->hwmon_dev); + if (data->vrm) + device_remove_file(&pdev->dev, &dev_attr_cpu0_vid); sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group); platform_set_drvdata(pdev, NULL); kfree(data); |