diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/amba/bus.c | 348 | ||||
-rw-r--r-- | drivers/char/hw_random/nomadik-rng.c | 2 | ||||
-rw-r--r-- | drivers/dma/amba-pl08x.c | 2 | ||||
-rw-r--r-- | drivers/dma/pl330.c | 2 | ||||
-rw-r--r-- | drivers/gpio/pl061.c | 2 | ||||
-rw-r--r-- | drivers/input/serio/ambakmi.c | 3 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.c | 348 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.h | 15 | ||||
-rw-r--r-- | drivers/rtc/rtc-pl030.c | 2 | ||||
-rw-r--r-- | drivers/rtc/rtc-pl031.c | 2 | ||||
-rw-r--r-- | drivers/spi/amba-pl022.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/amba-pl010.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/amba-pl011.c | 513 | ||||
-rw-r--r-- | drivers/video/Kconfig | 18 | ||||
-rw-r--r-- | drivers/video/amba-clcd.c | 2 | ||||
-rw-r--r-- | drivers/video/cyber2000fb.c | 263 | ||||
-rw-r--r-- | drivers/video/cyber2000fb.h | 16 | ||||
-rw-r--r-- | drivers/watchdog/sp805_wdt.c | 2 |
18 files changed, 1358 insertions, 186 deletions
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index e7df019d29d..6d2bb2524b6 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -13,16 +13,17 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/io.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/amba/bus.h> #include <asm/irq.h> #include <asm/sizes.h> -#define to_amba_device(d) container_of(d, struct amba_device, dev) #define to_amba_driver(d) container_of(d, struct amba_driver, drv) -static struct amba_id * -amba_lookup(struct amba_id *table, struct amba_device *dev) +static const struct amba_id * +amba_lookup(const struct amba_id *table, struct amba_device *dev) { int ret = 0; @@ -57,26 +58,6 @@ static int amba_uevent(struct device *dev, struct kobj_uevent_env *env) #define amba_uevent NULL #endif -static int amba_suspend(struct device *dev, pm_message_t state) -{ - struct amba_driver *drv = to_amba_driver(dev->driver); - int ret = 0; - - if (dev->driver && drv->suspend) - ret = drv->suspend(to_amba_device(dev), state); - return ret; -} - -static int amba_resume(struct device *dev) -{ - struct amba_driver *drv = to_amba_driver(dev->driver); - int ret = 0; - - if (dev->driver && drv->resume) - ret = drv->resume(to_amba_device(dev)); - return ret; -} - #define amba_attr_func(name,fmt,arg...) \ static ssize_t name##_show(struct device *_dev, \ struct device_attribute *attr, char *buf) \ @@ -102,17 +83,330 @@ static struct device_attribute amba_dev_attrs[] = { __ATTR_NULL, }; +#ifdef CONFIG_PM_SLEEP + +static int amba_legacy_suspend(struct device *dev, pm_message_t mesg) +{ + struct amba_driver *adrv = to_amba_driver(dev->driver); + struct amba_device *adev = to_amba_device(dev); + int ret = 0; + + if (dev->driver && adrv->suspend) + ret = adrv->suspend(adev, mesg); + + return ret; +} + +static int amba_legacy_resume(struct device *dev) +{ + struct amba_driver *adrv = to_amba_driver(dev->driver); + struct amba_device *adev = to_amba_device(dev); + int ret = 0; + + if (dev->driver && adrv->resume) + ret = adrv->resume(adev); + + return ret; +} + +static int amba_pm_prepare(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm && drv->pm->prepare) + ret = drv->pm->prepare(dev); + + return ret; +} + +static void amba_pm_complete(struct device *dev) +{ + struct device_driver *drv = dev->driver; + + if (drv && drv->pm && drv->pm->complete) + drv->pm->complete(dev); +} + +#else /* !CONFIG_PM_SLEEP */ + +#define amba_pm_prepare NULL +#define amba_pm_complete NULL + +#endif /* !CONFIG_PM_SLEEP */ + +#ifdef CONFIG_SUSPEND + +static int amba_pm_suspend(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->suspend) + ret = drv->pm->suspend(dev); + } else { + ret = amba_legacy_suspend(dev, PMSG_SUSPEND); + } + + return ret; +} + +static int amba_pm_suspend_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->suspend_noirq) + ret = drv->pm->suspend_noirq(dev); + } + + return ret; +} + +static int amba_pm_resume(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->resume) + ret = drv->pm->resume(dev); + } else { + ret = amba_legacy_resume(dev); + } + + return ret; +} + +static int amba_pm_resume_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->resume_noirq) + ret = drv->pm->resume_noirq(dev); + } + + return ret; +} + +#else /* !CONFIG_SUSPEND */ + +#define amba_pm_suspend NULL +#define amba_pm_resume NULL +#define amba_pm_suspend_noirq NULL +#define amba_pm_resume_noirq NULL + +#endif /* !CONFIG_SUSPEND */ + +#ifdef CONFIG_HIBERNATION + +static int amba_pm_freeze(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->freeze) + ret = drv->pm->freeze(dev); + } else { + ret = amba_legacy_suspend(dev, PMSG_FREEZE); + } + + return ret; +} + +static int amba_pm_freeze_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->freeze_noirq) + ret = drv->pm->freeze_noirq(dev); + } + + return ret; +} + +static int amba_pm_thaw(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->thaw) + ret = drv->pm->thaw(dev); + } else { + ret = amba_legacy_resume(dev); + } + + return ret; +} + +static int amba_pm_thaw_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->thaw_noirq) + ret = drv->pm->thaw_noirq(dev); + } + + return ret; +} + +static int amba_pm_poweroff(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->poweroff) + ret = drv->pm->poweroff(dev); + } else { + ret = amba_legacy_suspend(dev, PMSG_HIBERNATE); + } + + return ret; +} + +static int amba_pm_poweroff_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->poweroff_noirq) + ret = drv->pm->poweroff_noirq(dev); + } + + return ret; +} + +static int amba_pm_restore(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->restore) + ret = drv->pm->restore(dev); + } else { + ret = amba_legacy_resume(dev); + } + + return ret; +} + +static int amba_pm_restore_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->restore_noirq) + ret = drv->pm->restore_noirq(dev); + } + + return ret; +} + +#else /* !CONFIG_HIBERNATION */ + +#define amba_pm_freeze NULL +#define amba_pm_thaw NULL +#define amba_pm_poweroff NULL +#define amba_pm_restore NULL +#define amba_pm_freeze_noirq NULL +#define amba_pm_thaw_noirq NULL +#define amba_pm_poweroff_noirq NULL +#define amba_pm_restore_noirq NULL + +#endif /* !CONFIG_HIBERNATION */ + +#ifdef CONFIG_PM + +static const struct dev_pm_ops amba_pm = { + .prepare = amba_pm_prepare, + .complete = amba_pm_complete, + .suspend = amba_pm_suspend, + .resume = amba_pm_resume, + .freeze = amba_pm_freeze, + .thaw = amba_pm_thaw, + .poweroff = amba_pm_poweroff, + .restore = amba_pm_restore, + .suspend_noirq = amba_pm_suspend_noirq, + .resume_noirq = amba_pm_resume_noirq, + .freeze_noirq = amba_pm_freeze_noirq, + .thaw_noirq = amba_pm_thaw_noirq, + .poweroff_noirq = amba_pm_poweroff_noirq, + .restore_noirq = amba_pm_restore_noirq, + SET_RUNTIME_PM_OPS( + pm_generic_runtime_suspend, + pm_generic_runtime_resume, + pm_generic_runtime_idle + ) +}; + +#define AMBA_PM (&amba_pm) + +#else /* !CONFIG_PM */ + +#define AMBA_PM NULL + +#endif /* !CONFIG_PM */ + /* * Primecells are part of the Advanced Microcontroller Bus Architecture, * so we call the bus "amba". */ -static struct bus_type amba_bustype = { +struct bus_type amba_bustype = { .name = "amba", .dev_attrs = amba_dev_attrs, .match = amba_match, .uevent = amba_uevent, - .suspend = amba_suspend, - .resume = amba_resume, + .pm = AMBA_PM, }; static int __init amba_init(void) @@ -188,7 +482,7 @@ static int amba_probe(struct device *dev) { struct amba_device *pcdev = to_amba_device(dev); struct amba_driver *pcdrv = to_amba_driver(dev->driver); - struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev); + const struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev); int ret; do { diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c index a348c7e9aa0..dd1d143eb8e 100644 --- a/drivers/char/hw_random/nomadik-rng.c +++ b/drivers/char/hw_random/nomadik-rng.c @@ -39,7 +39,7 @@ static struct hwrng nmk_rng = { .read = nmk_rng_read, }; -static int nmk_rng_probe(struct amba_device *dev, struct amba_id *id) +static int nmk_rng_probe(struct amba_device *dev, const struct amba_id *id) { void __iomem *base; int ret; diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 07bca4970e5..e6d7228b147 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1845,7 +1845,7 @@ static inline void init_pl08x_debugfs(struct pl08x_driver_data *pl08x) } #endif -static int pl08x_probe(struct amba_device *adev, struct amba_id *id) +static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) { struct pl08x_driver_data *pl08x; const struct vendor_data *vd = id->data; diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 7c50f6dfd3f..6abe1ec1f2c 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -657,7 +657,7 @@ static irqreturn_t pl330_irq_handler(int irq, void *data) } static int __devinit -pl330_probe(struct amba_device *adev, struct amba_id *id) +pl330_probe(struct amba_device *adev, const struct amba_id *id) { struct dma_pl330_platdata *pdat; struct dma_pl330_dmac *pdmac; diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c index 2975d22daff..838ddbdf90c 100644 --- a/drivers/gpio/pl061.c +++ b/drivers/gpio/pl061.c @@ -232,7 +232,7 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) desc->irq_data.chip->irq_unmask(&desc->irq_data); } -static int pl061_probe(struct amba_device *dev, struct amba_id *id) +static int pl061_probe(struct amba_device *dev, const struct amba_id *id) { struct pl061_platform_data *pdata; struct pl061_gpio *chip; diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index 92563a681d6..12abc50508e 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -107,7 +107,8 @@ static void amba_kmi_close(struct serio *io) clk_disable(kmi->clk); } -static int __devinit amba_kmi_probe(struct amba_device *dev, struct amba_id *id) +static int __devinit amba_kmi_probe(struct amba_device *dev, + const struct amba_id *id) { struct amba_kmi_port *kmi; struct serio *io; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2d6de3e03e2..5bbb87d1025 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -2,7 +2,7 @@ * linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * Copyright (C) 2010 ST-Ericsson AB. + * Copyright (C) 2010 ST-Ericsson SA * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -25,8 +25,10 @@ #include <linux/clk.h> #include <linux/scatterlist.h> #include <linux/gpio.h> -#include <linux/amba/mmci.h> #include <linux/regulator/consumer.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/amba/mmci.h> #include <asm/div64.h> #include <asm/io.h> @@ -142,9 +144,6 @@ mmci_request_end(struct mmci_host *host, struct mmc_request *mrq) host->mrq = NULL; host->cmd = NULL; - if (mrq->data) - mrq->data->bytes_xfered = host->data_xfered; - /* * Need to drop the host lock here; mmc_request_done may call * back into the driver... @@ -189,6 +188,248 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); } +/* + * All the DMA operation mode stuff goes inside this ifdef. + * This assumes that you have a generic DMA device interface, + * no custom DMA interfaces are supported. + */ +#ifdef CONFIG_DMA_ENGINE +static void __devinit mmci_dma_setup(struct mmci_host *host) +{ + struct mmci_platform_data *plat = host->plat; + const char *rxname, *txname; + dma_cap_mask_t mask; + + if (!plat || !plat->dma_filter) { + dev_info(mmc_dev(host->mmc), "no DMA platform data\n"); + return; + } + + /* Try to acquire a generic DMA engine slave channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* + * If only an RX channel is specified, the driver will + * attempt to use it bidirectionally, however if it is + * is specified but cannot be located, DMA will be disabled. + */ + if (plat->dma_rx_param) { + host->dma_rx_channel = dma_request_channel(mask, + plat->dma_filter, + plat->dma_rx_param); + /* E.g if no DMA hardware is present */ + if (!host->dma_rx_channel) + dev_err(mmc_dev(host->mmc), "no RX DMA channel\n"); + } + + if (plat->dma_tx_param) { + host->dma_tx_channel = dma_request_channel(mask, + plat->dma_filter, + plat->dma_tx_param); + if (!host->dma_tx_channel) + dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n"); + } else { + host->dma_tx_channel = host->dma_rx_channel; + } + + if (host->dma_rx_channel) + rxname = dma_chan_name(host->dma_rx_channel); + else + rxname = "none"; + + if (host->dma_tx_channel) + txname = dma_chan_name(host->dma_tx_channel); + else + txname = "none"; + + dev_info(mmc_dev(host->mmc), "DMA channels RX %s, TX %s\n", + rxname, txname); + + /* + * Limit the maximum segment size in any SG entry according to + * the parameters of the DMA engine device. + */ + if (host->dma_tx_channel) { + struct device *dev = host->dma_tx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } + if (host->dma_rx_channel) { + struct device *dev = host->dma_rx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } +} + +/* + * This is used in __devinit or __devexit so inline it + * so it can be discarded. + */ +static inline void mmci_dma_release(struct mmci_host *host) +{ + struct mmci_platform_data *plat = host->plat; + + if (host->dma_rx_channel) + dma_release_channel(host->dma_rx_channel); + if (host->dma_tx_channel && plat->dma_tx_param) + dma_release_channel(host->dma_tx_channel); + host->dma_rx_channel = host->dma_tx_channel = NULL; +} + +static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data) +{ + struct dma_chan *chan = host->dma_current; + enum dma_data_direction dir; + u32 status; + int i; + + /* Wait up to 1ms for the DMA to complete */ + for (i = 0; ; i++) { + status = readl(host->base + MMCISTATUS); + if (!(status & MCI_RXDATAAVLBLMASK) || i >= 100) + break; + udelay(10); + } + + /* + * Check to see whether we still have some data left in the FIFO - + * this catches DMA controllers which are unable to monitor the + * DMALBREQ and DMALSREQ signals while allowing us to DMA to non- + * contiguous buffers. On TX, we'll get a FIFO underrun error. + */ + if (status & MCI_RXDATAAVLBLMASK) { + dmaengine_terminate_all(chan); + if (!data->error) + data->error = -EIO; + } + + if (data->flags & MMC_DATA_WRITE) { + dir = DMA_TO_DEVICE; + } else { + dir = DMA_FROM_DEVICE; + } + + dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir); + + /* + * Use of DMA with scatter-gather is impossible. + * Give up with DMA and switch back to PIO mode. + */ + if (status & MCI_RXDATAAVLBLMASK) { + dev_err(mmc_dev(host->mmc), "buggy DMA detected. Taking evasive action.\n"); + mmci_dma_release(host); + } +} + +static void mmci_dma_data_error(struct mmci_host *host) +{ + dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n"); + dmaengine_terminate_all(host->dma_current); +} + +static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) +{ + struct variant_data *variant = host->variant; + struct dma_slave_config conf = { + .src_addr = host->phybase + MMCIFIFO, + .dst_addr = host->phybase + MMCIFIFO, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_maxburst = variant->fifohalfsize >> 2, /* # of words */ + .dst_maxburst = variant->fifohalfsize >> 2, /* # of words */ + }; + struct mmc_data *data = host->data; + struct dma_chan *chan; + struct dma_device *device; + struct dma_async_tx_descriptor *desc; + int nr_sg; + + host->dma_current = NULL; + + if (data->flags & MMC_DATA_READ) { + conf.direction = DMA_FROM_DEVICE; + chan = host->dma_rx_channel; + } else { + conf.direction = DMA_TO_DEVICE; + chan = host->dma_tx_channel; + } + + /* If there's no DMA channel, fall back to PIO */ + if (!chan) + return -EINVAL; + + /* If less than or equal to the fifo size, don't bother with DMA */ + if (host->size <= variant->fifosize) + return -EINVAL; + + device = chan->device; + nr_sg = dma_map_sg(device->dev, data->sg, data->sg_len, conf.direction); + if (nr_sg == 0) + return -EINVAL; + + dmaengine_slave_config(chan, &conf); + desc = device->device_prep_slave_sg(chan, data->sg, nr_sg, + conf.direction, DMA_CTRL_ACK); + if (!desc) + goto unmap_exit; + + /* Okay, go for it. */ + host->dma_current = chan; + + dev_vdbg(mmc_dev(host->mmc), + "Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n", + data->sg_len, data->blksz, data->blocks, data->flags); + dmaengine_submit(desc); + dma_async_issue_pending(chan); + + datactrl |= MCI_DPSM_DMAENABLE; + + /* Trigger the DMA transfer */ + writel(datactrl, host->base + MMCIDATACTRL); + + /* + * Let the MMCI say when the data is ended and it's time + * to fire next DMA request. When that happens, MMCI will + * call mmci_data_end() + */ + writel(readl(host->base + MMCIMASK0) | MCI_DATAENDMASK, + host->base + MMCIMASK0); + return 0; + +unmap_exit: + dmaengine_terminate_all(chan); + dma_unmap_sg(device->dev, data->sg, data->sg_len, conf.direction); + return -ENOMEM; +} +#else +/* Blank functions if the DMA engine is not available */ +static inline void mmci_dma_setup(struct mmci_host *host) +{ +} + +static inline void mmci_dma_release(struct mmci_host *host) +{ +} + +static inline void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data) +{ +} + +static inline void mmci_dma_data_error(struct mmci_host *host) +{ +} + +static inline int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) +{ + return -ENOSYS; +} +#endif + static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) { struct variant_data *variant = host->variant; @@ -202,9 +443,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) host->data = data; host->size = data->blksz * data->blocks; - host->data_xfered = 0; - - mmci_init_sg(host, data); + data->bytes_xfered = 0; clks = (unsigned long long)data->timeout_ns * host->cclk; do_div(clks, 1000000000UL); @@ -219,15 +458,29 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) BUG_ON(1 << blksz_bits != data->blksz); datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; - if (data->flags & MMC_DATA_READ) { + + if (data->flags & MMC_DATA_READ) datactrl |= MCI_DPSM_DIRECTION; + + /* + * Attempt to use DMA operation mode, if this + * should fail, fall back to PIO mode + */ + if (!mmci_dma_start_data(host, datactrl)) + return; + + /* IRQ mode, map the SG list for CPU reading/writing */ + mmci_init_sg(host, data); + + if (data->flags & MMC_DATA_READ) { irqmask = MCI_RXFIFOHALFFULLMASK; /* - * If we have less than a FIFOSIZE of bytes to transfer, - * trigger a PIO interrupt as soon as any data is available. + * If we have less than the fifo 'half-full' threshold to + * transfer, trigger a PIO interrupt as soon as any data + * is available. */ - if (host->size < variant->fifosize) + if (host->size < variant->fifohalfsize) irqmask |= MCI_RXDATAAVLBLMASK; } else { /* @@ -283,49 +536,51 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { u32 remain, success; - /* Calculate how far we are into the transfer */ + /* Terminate the DMA transfer */ + if (dma_inprogress(host)) + mmci_dma_data_error(host); + + /* + * Calculate how far we are into the transfer. Note that + * the data counter gives the number of bytes transferred + * on the MMC bus, not on the host side. On reads, this + * can be as much as a FIFO-worth of data ahead. This + * matters for FIFO overruns only. + */ remain = readl(host->base + MMCIDATACNT); success = data->blksz * data->blocks - remain; - dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); + dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n", + status, success); if (status & MCI_DATACRCFAIL) { /* Last block was not successful */ - host->data_xfered = round_down(success - 1, data->blksz); + success -= 1; data->error = -EILSEQ; } else if (status & MCI_DATATIMEOUT) { - host->data_xfered = round_down(success, data->blksz); data->error = -ETIMEDOUT; - } else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) { - host->data_xfered = round_down(success, data->blksz); + } else if (status & MCI_TXUNDERRUN) { + data->error = -EIO; + } else if (status & MCI_RXOVERRUN) { + if (success > host->variant->fifosize) + success -= host->variant->fifosize; + else + success = 0; data->error = -EIO; } - - /* - * We hit an error condition. Ensure that any data - * partially written to a page is properly coherent. - */ - if (data->flags & MMC_DATA_READ) { - struct sg_mapping_iter *sg_miter = &host->sg_miter; - unsigned long flags; - - local_irq_save(flags); - if (sg_miter_next(sg_miter)) { - flush_dcache_page(sg_miter->page); - sg_miter_stop(sg_miter); - } - local_irq_restore(flags); - } + data->bytes_xfered = round_down(success, data->blksz); } if (status & MCI_DATABLOCKEND) dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n"); if (status & MCI_DATAEND || data->error) { + if (dma_inprogress(host)) + mmci_dma_unmap(host, data); mmci_stop_data(host); if (!data->error) /* The error clause is handled above, success! */ - host->data_xfered += data->blksz * data->blocks; + data->bytes_xfered = data->blksz * data->blocks; if (!data->stop) { mmci_request_end(host, data->mrq); @@ -498,9 +753,6 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) if (remain) break; - if (status & MCI_RXACTIVE) - flush_dcache_page(sg_miter->page); - status = readl(base + MMCISTATUS); } while (1); @@ -509,10 +761,10 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) local_irq_restore(flags); /* - * If we're nearing the end of the read, switch to - * "any data available" mode. + * If we have less than the fifo 'half-full' threshold to transfer, + * trigger a PIO interrupt as soon as any data is available. */ - if (status & MCI_RXACTIVE && host->size < variant->fifosize) + if (status & MCI_RXACTIVE && host->size < variant->fifohalfsize) mmci_set_mask1(host, MCI_RXDATAAVLBLMASK); /* @@ -713,7 +965,8 @@ static const struct mmc_host_ops mmci_ops = { .get_cd = mmci_get_cd, }; -static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) +static int __devinit mmci_probe(struct amba_device *dev, + const struct amba_id *id) { struct mmci_platform_data *plat = dev->dev.platform_data; struct variant_data *variant = id->data; @@ -776,6 +1029,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n", host->mclk); } + host->phybase = dev->res.start; host->base = ioremap(dev->res.start, resource_size(&dev->res)); if (!host->base) { ret = -ENOMEM; @@ -903,9 +1157,12 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) amba_set_drvdata(dev, mmc); - dev_info(&dev->dev, "%s: PL%03x rev%u at 0x%08llx irq %d,%d\n", - mmc_hostname(mmc), amba_part(dev), amba_rev(dev), - (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]); + dev_info(&dev->dev, "%s: PL%03x manf %x rev%u at 0x%08llx irq %d,%d (pio)\n", + mmc_hostname(mmc), amba_part(dev), amba_manf(dev), + amba_rev(dev), (unsigned long long)dev->res.start, + dev->irq[0], dev->irq[1]); + + mmci_dma_setup(host); mmc_add_host(mmc); @@ -952,6 +1209,7 @@ static int __devexit mmci_remove(struct amba_device *dev) writel(0, host->base + MMCICOMMAND); writel(0, host->base + MMCIDATACTRL); + mmci_dma_release(host); free_irq(dev->irq[0], host); if (!host->singleirq) free_irq(dev->irq[1], host); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index c1df7b82d36..ec9a7bc6d0d 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -148,8 +148,10 @@ struct clk; struct variant_data; +struct dma_chan; struct mmci_host { + phys_addr_t phybase; void __iomem *base; struct mmc_request *mrq; struct mmc_command *cmd; @@ -161,8 +163,6 @@ struct mmci_host { int gpio_cd_irq; bool singleirq; - unsigned int data_xfered; - spinlock_t lock; unsigned int mclk; @@ -181,5 +181,16 @@ struct mmci_host { struct sg_mapping_iter sg_miter; unsigned int size; struct regulator *vcc; + +#ifdef CONFIG_DMA_ENGINE + /* DMA stuff */ + struct dma_chan *dma_current; + struct dma_chan *dma_rx_channel; + struct dma_chan *dma_tx_channel; + +#define dma_inprogress(host) ((host)->dma_current) +#else +#define dma_inprogress(host) (0) +#endif }; diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c index d554368c9f5..1d28d4451da 100644 --- a/drivers/rtc/rtc-pl030.c +++ b/drivers/rtc/rtc-pl030.c @@ -97,7 +97,7 @@ static const struct rtc_class_ops pl030_ops = { .set_alarm = pl030_set_alarm, }; -static int pl030_probe(struct amba_device *dev, struct amba_id *id) +static int pl030_probe(struct amba_device *dev, const struct amba_id *id) { struct pl030_rtc *rtc; int ret; diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index d829ea63c4f..ff1b84bd9bb 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -307,7 +307,7 @@ static int pl031_remove(struct amba_device *adev) return 0; } -static int pl031_probe(struct amba_device *adev, struct amba_id *id) +static int pl031_probe(struct amba_device *adev, const struct amba_id *id) { int ret; struct pl031_local *ldata; diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 71a1219a995..95e58c70a2c 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -2021,7 +2021,7 @@ static void pl022_cleanup(struct spi_device *spi) static int __devinit -pl022_probe(struct amba_device *adev, struct amba_id *id) +pl022_prob |