diff options
Diffstat (limited to 'drivers')
45 files changed, 4688 insertions, 387 deletions
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index ea0b3863ad0..eab2cf7a026 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -172,6 +172,7 @@ config CRYPTO_DEV_MV_CESA config CRYPTO_DEV_NIAGARA2 tristate "Niagara2 Stream Processing Unit driver" + select CRYPTO_DES select CRYPTO_ALGAPI depends on SPARC64 help @@ -243,4 +244,12 @@ config CRYPTO_DEV_OMAP_SHAM OMAP processors have SHA1/MD5 hw accelerator. Select this if you want to use the OMAP module for SHA1/MD5 algorithms. +config CRYPTO_DEV_OMAP_AES + tristate "Support for OMAP AES hw engine" + depends on ARCH_OMAP2 || ARCH_OMAP3 + select CRYPTO_AES + help + OMAP processors have AES module accelerator. Select this if you + want to use the OMAP module for AES algorithms. + endif # CRYPTO_HW diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile index 6dbbe00c452..256697330a4 100644 --- a/drivers/crypto/Makefile +++ b/drivers/crypto/Makefile @@ -2,11 +2,12 @@ obj-$(CONFIG_CRYPTO_DEV_PADLOCK_AES) += padlock-aes.o obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o obj-$(CONFIG_CRYPTO_DEV_NIAGARA2) += n2_crypto.o -n2_crypto-objs := n2_core.o n2_asm.o +n2_crypto-y := n2_core.o n2_asm.o obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o obj-$(CONFIG_CRYPTO_DEV_MV_CESA) += mv_cesa.o obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/ obj-$(CONFIG_CRYPTO_DEV_OMAP_SHAM) += omap-sham.o +obj-$(CONFIG_CRYPTO_DEV_OMAP_AES) += omap-aes.o diff --git a/drivers/crypto/amcc/Makefile b/drivers/crypto/amcc/Makefile index aa376e8d5ed..5c0c62b65d6 100644 --- a/drivers/crypto/amcc/Makefile +++ b/drivers/crypto/amcc/Makefile @@ -1,2 +1,2 @@ obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += crypto4xx.o -crypto4xx-objs := crypto4xx_core.o crypto4xx_alg.o crypto4xx_sa.o +crypto4xx-y := crypto4xx_core.o crypto4xx_alg.o crypto4xx_sa.o diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index e449ac5627a..0eac3da566b 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -2700,8 +2700,7 @@ static void __devexit hifn_remove(struct pci_dev *pdev) dev = pci_get_drvdata(pdev); if (dev) { - cancel_delayed_work(&dev->work); - flush_scheduled_work(); + cancel_delayed_work_sync(&dev->work); hifn_unregister_rng(dev); hifn_unregister_alg(dev); diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c new file mode 100644 index 00000000000..799ca517c12 --- /dev/null +++ b/drivers/crypto/omap-aes.c @@ -0,0 +1,948 @@ +/* + * Cryptographic API. + * + * Support for OMAP AES HW acceleration. + * + * Copyright (c) 2010 Nokia Corporation + * Author: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/scatterlist.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/crypto.h> +#include <linux/interrupt.h> +#include <crypto/scatterwalk.h> +#include <crypto/aes.h> + +#include <plat/cpu.h> +#include <plat/dma.h> + +/* OMAP TRM gives bitfields as start:end, where start is the higher bit + number. For example 7:0 */ +#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) +#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) + +#define AES_REG_KEY(x) (0x1C - ((x ^ 0x01) * 0x04)) +#define AES_REG_IV(x) (0x20 + ((x) * 0x04)) + +#define AES_REG_CTRL 0x30 +#define AES_REG_CTRL_CTR_WIDTH (1 << 7) +#define AES_REG_CTRL_CTR (1 << 6) +#define AES_REG_CTRL_CBC (1 << 5) +#define AES_REG_CTRL_KEY_SIZE (3 << 3) +#define AES_REG_CTRL_DIRECTION (1 << 2) +#define AES_REG_CTRL_INPUT_READY (1 << 1) +#define AES_REG_CTRL_OUTPUT_READY (1 << 0) + +#define AES_REG_DATA 0x34 +#define AES_REG_DATA_N(x) (0x34 + ((x) * 0x04)) + +#define AES_REG_REV 0x44 +#define AES_REG_REV_MAJOR 0xF0 +#define AES_REG_REV_MINOR 0x0F + +#define AES_REG_MASK 0x48 +#define AES_REG_MASK_SIDLE (1 << 6) +#define AES_REG_MASK_START (1 << 5) +#define AES_REG_MASK_DMA_OUT_EN (1 << 3) +#define AES_REG_MASK_DMA_IN_EN (1 << 2) +#define AES_REG_MASK_SOFTRESET (1 << 1) +#define AES_REG_AUTOIDLE (1 << 0) + +#define AES_REG_SYSSTATUS 0x4C +#define AES_REG_SYSSTATUS_RESETDONE (1 << 0) + +#define DEFAULT_TIMEOUT (5*HZ) + +#define FLAGS_MODE_MASK 0x000f +#define FLAGS_ENCRYPT BIT(0) +#define FLAGS_CBC BIT(1) +#define FLAGS_GIV BIT(2) + +#define FLAGS_NEW_KEY BIT(4) +#define FLAGS_NEW_IV BIT(5) +#define FLAGS_INIT BIT(6) +#define FLAGS_FAST BIT(7) +#define FLAGS_BUSY 8 + +struct omap_aes_ctx { + struct omap_aes_dev *dd; + + int keylen; + u32 key[AES_KEYSIZE_256 / sizeof(u32)]; + unsigned long flags; +}; + +struct omap_aes_reqctx { + unsigned long mode; +}; + +#define OMAP_AES_QUEUE_LENGTH 1 +#define OMAP_AES_CACHE_SIZE 0 + +struct omap_aes_dev { + struct list_head list; + unsigned long phys_base; + void __iomem *io_base; + struct clk *iclk; + struct omap_aes_ctx *ctx; + struct device *dev; + unsigned long flags; + + u32 *iv; + u32 ctrl; + + spinlock_t lock; + struct crypto_queue queue; + + struct tasklet_struct task; + + struct ablkcipher_request *req; + size_t total; + struct scatterlist *in_sg; + size_t in_offset; + struct scatterlist *out_sg; + size_t out_offset; + + size_t buflen; + void *buf_in; + size_t dma_size; + int dma_in; + int dma_lch_in; + dma_addr_t dma_addr_in; + void *buf_out; + int dma_out; + int dma_lch_out; + dma_addr_t dma_addr_out; +}; + +/* keep registered devices data here */ +static LIST_HEAD(dev_list); +static DEFINE_SPINLOCK(list_lock); + +static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset) +{ + return __raw_readl(dd->io_base + offset); +} + +static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset, + u32 value) +{ + __raw_writel(value, dd->io_base + offset); +} + +static inline void omap_aes_write_mask(struct omap_aes_dev *dd, u32 offset, + u32 value, u32 mask) +{ + u32 val; + + val = omap_aes_read(dd, offset); + val &= ~mask; + val |= value; + omap_aes_write(dd, offset, val); +} + +static void omap_aes_write_n(struct omap_aes_dev *dd, u32 offset, + u32 *value, int count) +{ + for (; count--; value++, offset += 4) + omap_aes_write(dd, offset, *value); +} + +static int omap_aes_wait(struct omap_aes_dev *dd, u32 offset, u32 bit) +{ + unsigned long timeout = jiffies + DEFAULT_TIMEOUT; + + while (!(omap_aes_read(dd, offset) & bit)) { + if (time_is_before_jiffies(timeout)) { + dev_err(dd->dev, "omap-aes timeout\n"); + return -ETIMEDOUT; + } + } + return 0; +} + +static int omap_aes_hw_init(struct omap_aes_dev *dd) +{ + int err = 0; + + clk_enable(dd->iclk); + if (!(dd->flags & FLAGS_INIT)) { + /* is it necessary to reset before every operation? */ + omap_aes_write_mask(dd, AES_REG_MASK, AES_REG_MASK_SOFTRESET, + AES_REG_MASK_SOFTRESET); + /* + * prevent OCP bus error (SRESP) in case an access to the module + * is performed while the module is coming out of soft reset + */ + __asm__ __volatile__("nop"); + __asm__ __volatile__("nop"); + + err = omap_aes_wait(dd, AES_REG_SYSSTATUS, + AES_REG_SYSSTATUS_RESETDONE); + if (!err) + dd->flags |= FLAGS_INIT; + } + + return err; +} + +static void omap_aes_hw_cleanup(struct omap_aes_dev *dd) +{ + clk_disable(dd->iclk); +} + +static void omap_aes_write_ctrl(struct omap_aes_dev *dd) +{ + unsigned int key32; + int i; + u32 val, mask; + + val = FLD_VAL(((dd->ctx->keylen >> 3) - 1), 4, 3); + if (dd->flags & FLAGS_CBC) + val |= AES_REG_CTRL_CBC; + if (dd->flags & FLAGS_ENCRYPT) + val |= AES_REG_CTRL_DIRECTION; + + if (dd->ctrl == val && !(dd->flags & FLAGS_NEW_IV) && + !(dd->ctx->flags & FLAGS_NEW_KEY)) + goto out; + + /* only need to write control registers for new settings */ + + dd->ctrl = val; + + val = 0; + if (dd->dma_lch_out >= 0) + val |= AES_REG_MASK_DMA_OUT_EN; + if (dd->dma_lch_in >= 0) + val |= AES_REG_MASK_DMA_IN_EN; + + mask = AES_REG_MASK_DMA_IN_EN | AES_REG_MASK_DMA_OUT_EN; + + omap_aes_write_mask(dd, AES_REG_MASK, val, mask); + + pr_debug("Set key\n"); + key32 = dd->ctx->keylen / sizeof(u32); + /* set a key */ + for (i = 0; i < key32; i++) { + omap_aes_write(dd, AES_REG_KEY(i), + __le32_to_cpu(dd->ctx->key[i])); + } + dd->ctx->flags &= ~FLAGS_NEW_KEY; + + if (dd->flags & FLAGS_NEW_IV) { + pr_debug("Set IV\n"); + omap_aes_write_n(dd, AES_REG_IV(0), dd->iv, 4); + dd->flags &= ~FLAGS_NEW_IV; + } + + mask = AES_REG_CTRL_CBC | AES_REG_CTRL_DIRECTION | + AES_REG_CTRL_KEY_SIZE; + + omap_aes_write_mask(dd, AES_REG_CTRL, dd->ctrl, mask); + +out: + /* start DMA or disable idle mode */ + omap_aes_write_mask(dd, AES_REG_MASK, AES_REG_MASK_START, + AES_REG_MASK_START); +} + +static struct omap_aes_dev *omap_aes_find_dev(struct omap_aes_ctx *ctx) +{ + struct omap_aes_dev *dd = NULL, *tmp; + + spin_lock_bh(&list_lock); + if (!ctx->dd) { + list_for_each_entry(tmp, &dev_list, list) { + /* FIXME: take fist available aes core */ + dd = tmp; + break; + } + ctx->dd = dd; + } else { + /* already found before */ + dd = ctx->dd; + } + spin_unlock_bh(&list_lock); + + return dd; +} + +static void omap_aes_dma_callback(int lch, u16 ch_status, void *data) +{ + struct omap_aes_dev *dd = data; + + if (lch == dd->dma_lch_out) + tasklet_schedule(&dd->task); +} + +static int omap_aes_dma_init(struct omap_aes_dev *dd) +{ + int err = -ENOMEM; + + dd->dma_lch_out = -1; + dd->dma_lch_in = -1; + + dd->buf_in = (void *)__get_free_pages(GFP_KERNEL, OMAP_AES_CACHE_SIZE); + dd->buf_out = (void *)__get_free_pages(GFP_KERNEL, OMAP_AES_CACHE_SIZE); + dd->buflen = PAGE_SIZE << OMAP_AES_CACHE_SIZE; + dd->buflen &= ~(AES_BLOCK_SIZE - 1); + + if (!dd->buf_in || !dd->buf_out) { + dev_err(dd->dev, "unable to alloc pages.\n"); + goto err_alloc; + } + + /* MAP here */ + dd->dma_addr_in = dma_map_single(dd->dev, dd->buf_in, dd->buflen, + DMA_TO_DEVICE); + if (dma_mapping_error(dd->dev, dd->dma_addr_in)) { + dev_err(dd->dev, "dma %d bytes error\n", dd->buflen); + err = -EINVAL; + goto err_map_in; + } + + dd->dma_addr_out = dma_map_single(dd->dev, dd->buf_out, dd->buflen, + DMA_FROM_DEVICE); + if (dma_mapping_error(dd->dev, dd->dma_addr_out)) { + dev_err(dd->dev, "dma %d bytes error\n", dd->buflen); + err = -EINVAL; + goto err_map_out; + } + + err = omap_request_dma(dd->dma_in, "omap-aes-rx", + omap_aes_dma_callback, dd, &dd->dma_lch_in); + if (err) { + dev_err(dd->dev, "Unable to request DMA channel\n"); + goto err_dma_in; + } + err = omap_request_dma(dd->dma_out, "omap-aes-tx", + omap_aes_dma_callback, dd, &dd->dma_lch_out); + if (err) { + dev_err(dd->dev, "Unable to request DMA channel\n"); + goto err_dma_out; + } + + omap_set_dma_dest_params(dd->dma_lch_in, 0, OMAP_DMA_AMODE_CONSTANT, + dd->phys_base + AES_REG_DATA, 0, 4); + + omap_set_dma_dest_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4); + omap_set_dma_src_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4); + + omap_set_dma_src_params(dd->dma_lch_out, 0, OMAP_DMA_AMODE_CONSTANT, + dd->phys_base + AES_REG_DATA, 0, 4); + + omap_set_dma_src_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4); + omap_set_dma_dest_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4); + + return 0; + +err_dma_out: + omap_free_dma(dd->dma_lch_in); +err_dma_in: + dma_unmap_single(dd->dev, dd->dma_addr_out, dd->buflen, + DMA_FROM_DEVICE); +err_map_out: + dma_unmap_single(dd->dev, dd->dma_addr_in, dd->buflen, DMA_TO_DEVICE); +err_map_in: + free_pages((unsigned long)dd->buf_out, OMAP_AES_CACHE_SIZE); + free_pages((unsigned long)dd->buf_in, OMAP_AES_CACHE_SIZE); +err_alloc: + if (err) + pr_err("error: %d\n", err); + return err; +} + +static void omap_aes_dma_cleanup(struct omap_aes_dev *dd) +{ + omap_free_dma(dd->dma_lch_out); + omap_free_dma(dd->dma_lch_in); + dma_unmap_single(dd->dev, dd->dma_addr_out, dd->buflen, + DMA_FROM_DEVICE); + dma_unmap_single(dd->dev, dd->dma_addr_in, dd->buflen, DMA_TO_DEVICE); + free_pages((unsigned long)dd->buf_out, OMAP_AES_CACHE_SIZE); + free_pages((unsigned long)dd->buf_in, OMAP_AES_CACHE_SIZE); +} + +static void sg_copy_buf(void *buf, struct scatterlist *sg, + unsigned int start, unsigned int nbytes, int out) +{ + struct scatter_walk walk; + + if (!nbytes) + return; + + scatterwalk_start(&walk, sg); + scatterwalk_advance(&walk, start); + scatterwalk_copychunks(buf, &walk, nbytes, out); + scatterwalk_done(&walk, out, 0); +} + +static int sg_copy(struct scatterlist **sg, size_t *offset, void *buf, + size_t buflen, size_t total, int out) +{ + unsigned int count, off = 0; + + while (buflen && total) { + count = min((*sg)->length - *offset, total); + count = min(count, buflen); + + if (!count) + return off; + + sg_copy_buf(buf + off, *sg, *offset, count, out); + + off += count; + buflen -= count; + *offset += count; + total -= count; + + if (*offset == (*sg)->length) { + *sg = sg_next(*sg); + if (*sg) + *offset = 0; + else + total = 0; + } + } + + return off; +} + +static int omap_aes_crypt_dma(struct crypto_tfm *tfm, dma_addr_t dma_addr_in, + dma_addr_t dma_addr_out, int length) +{ + struct omap_aes_ctx *ctx = crypto_tfm_ctx(tfm); + struct omap_aes_dev *dd = ctx->dd; + int len32; + + pr_debug("len: %d\n", length); + + dd->dma_size = length; + + if (!(dd->flags & FLAGS_FAST)) + dma_sync_single_for_device(dd->dev, dma_addr_in, length, + DMA_TO_DEVICE); + + len32 = DIV_ROUND_UP(length, sizeof(u32)); + + /* IN */ + omap_set_dma_transfer_params(dd->dma_lch_in, OMAP_DMA_DATA_TYPE_S32, + len32, 1, OMAP_DMA_SYNC_PACKET, dd->dma_in, + OMAP_DMA_DST_SYNC); + + omap_set_dma_src_params(dd->dma_lch_in, 0, OMAP_DMA_AMODE_POST_INC, + dma_addr_in, 0, 0); + + /* OUT */ + omap_set_dma_transfer_params(dd->dma_lch_out, OMAP_DMA_DATA_TYPE_S32, + len32, 1, OMAP_DMA_SYNC_PACKET, + dd->dma_out, OMAP_DMA_SRC_SYNC); + + omap_set_dma_dest_params(dd->dma_lch_out, 0, OMAP_DMA_AMODE_POST_INC, + dma_addr_out, 0, 0); + + omap_start_dma(dd->dma_lch_in); + omap_start_dma(dd->dma_lch_out); + + omap_aes_write_ctrl(dd); + + return 0; +} + +static int omap_aes_crypt_dma_start(struct omap_aes_dev *dd) +{ + struct crypto_tfm *tfm = crypto_ablkcipher_tfm( + crypto_ablkcipher_reqtfm(dd->req)); + int err, fast = 0, in, out; + size_t count; + dma_addr_t addr_in, addr_out; + + pr_debug("total: %d\n", dd->total); + + if (sg_is_last(dd->in_sg) && sg_is_last(dd->out_sg)) { + /* check for alignment */ + in = IS_ALIGNED((u32)dd->in_sg->offset, sizeof(u32)); + out = IS_ALIGNED((u32)dd->out_sg->offset, sizeof(u32)); + + fast = in && out; + } + + if (fast) { + count = min(dd->total, sg_dma_len(dd->in_sg)); + count = min(count, sg_dma_len(dd->out_sg)); + + if (count != dd->total) + return -EINVAL; + + pr_debug("fast\n"); + + err = dma_map_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE); + if (!err) { + dev_err(dd->dev, "dma_map_sg() error\n"); + return -EINVAL; + } + + err = dma_map_sg(dd->dev, dd->out_sg, 1, DMA_FROM_DEVICE); + if (!err) { + dev_err(dd->dev, "dma_map_sg() error\n"); + dma_unmap_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE); + return -EINVAL; + } + + addr_in = sg_dma_address(dd->in_sg); + addr_out = sg_dma_address(dd->out_sg); + + dd->flags |= FLAGS_FAST; + + } else { + /* use cache buffers */ + count = sg_copy(&dd->in_sg, &dd->in_offset, dd->buf_in, + dd->buflen, dd->total, 0); + + addr_in = dd->dma_addr_in; + addr_out = dd->dma_addr_out; + + dd->flags &= ~FLAGS_FAST; + + } + + dd->total -= count; + + err = omap_aes_hw_init(dd); + + err = omap_aes_crypt_dma(tfm, addr_in, addr_out, count); + + return err; +} + +static void omap_aes_finish_req(struct omap_aes_dev *dd, int err) +{ + struct omap_aes_ctx *ctx; + + pr_debug("err: %d\n", err); + + ctx = crypto_ablkcipher_ctx(crypto_ablkcipher_reqtfm(dd->req)); + + if (!dd->total) + dd->req->base.complete(&dd->req->base, err); +} + +static int omap_aes_crypt_dma_stop(struct omap_aes_dev *dd) +{ + int err = 0; + size_t count; + + pr_debug("total: %d\n", dd->total); + + omap_aes_write_mask(dd, AES_REG_MASK, 0, AES_REG_MASK_START); + + omap_aes_hw_cleanup(dd); + + omap_stop_dma(dd->dma_lch_in); + omap_stop_dma(dd->dma_lch_out); + + if (dd->flags & FLAGS_FAST) { + dma_unmap_sg(dd->dev, dd->out_sg, 1, DMA_FROM_DEVICE); + dma_unmap_sg(dd->dev, dd->in_sg, 1, DMA_TO_DEVICE); + } else { + dma_sync_single_for_device(dd->dev, dd->dma_addr_out, + dd->dma_size, DMA_FROM_DEVICE); + + /* copy data */ + count = sg_copy(&dd->out_sg, &dd->out_offset, dd->buf_out, + dd->buflen, dd->dma_size, 1); + if (count != dd->dma_size) { + err = -EINVAL; + pr_err("not all data converted: %u\n", count); + } + } + + if (err || !dd->total) + omap_aes_finish_req(dd, err); + + return err; +} + +static int omap_aes_handle_req(struct omap_aes_dev *dd) +{ + struct crypto_async_request *async_req, *backlog; + struct omap_aes_ctx *ctx; + struct omap_aes_reqctx *rctx; + struct ablkcipher_request *req; + unsigned long flags; + + if (dd->total) + goto start; + + spin_lock_irqsave(&dd->lock, flags); + backlog = crypto_get_backlog(&dd->queue); + async_req = crypto_dequeue_request(&dd->queue); + if (!async_req) + clear_bit(FLAGS_BUSY, &dd->flags); + spin_unlock_irqrestore(&dd->lock, flags); + + if (!async_req) + return 0; + + if (backlog) + backlog->complete(backlog, -EINPROGRESS); + + req = ablkcipher_request_cast(async_req); + + pr_debug("get new req\n"); + + /* assign new request to device */ + dd->req = req; + dd->total = req->nbytes; + dd->in_offset = 0; + dd->in_sg = req->src; + dd->out_offset = 0; + dd->out_sg = req->dst; + + rctx = ablkcipher_request_ctx(req); + ctx = crypto_ablkcipher_ctx(crypto_ablkcipher_reqtfm(req)); + rctx->mode &= FLAGS_MODE_MASK; + dd->flags = (dd->flags & ~FLAGS_MODE_MASK) | rctx->mode; + + dd->iv = req->info; + if ((dd->flags & FLAGS_CBC) && dd->iv) + dd->flags |= FLAGS_NEW_IV; + else + dd->flags &= ~FLAGS_NEW_IV; + + ctx->dd = dd; + if (dd->ctx != ctx) { + /* assign new context to device */ + dd->ctx = ctx; + ctx->flags |= FLAGS_NEW_KEY; + } + + if (!IS_ALIGNED(req->nbytes, AES_BLOCK_SIZE)) + pr_err("request size is not exact amount of AES blocks\n"); + +start: + return omap_aes_crypt_dma_start(dd); +} + +static void omap_aes_task(unsigned long data) +{ + struct omap_aes_dev *dd = (struct omap_aes_dev *)data; + int err; + + pr_debug("enter\n"); + + err = omap_aes_crypt_dma_stop(dd); + + err = omap_aes_handle_req(dd); + + pr_debug("exit\n"); +} + +static int omap_aes_crypt(struct ablkcipher_request *req, unsigned long mode) +{ + struct omap_aes_ctx *ctx = crypto_ablkcipher_ctx( + crypto_ablkcipher_reqtfm(req)); + struct omap_aes_reqctx *rctx = ablkcipher_request_ctx(req); + struct omap_aes_dev *dd; + unsigned long flags; + int err; + + pr_debug("nbytes: %d, enc: %d, cbc: %d\n", req->nbytes, + !!(mode & FLAGS_ENCRYPT), + !!(mode & FLAGS_CBC)); + + dd = omap_aes_find_dev(ctx); + if (!dd) + return -ENODEV; + + rctx->mode = mode; + + spin_lock_irqsave(&dd->lock, flags); + err = ablkcipher_enqueue_request(&dd->queue, req); + spin_unlock_irqrestore(&dd->lock, flags); + + if (!test_and_set_bit(FLAGS_BUSY, &dd->flags)) + omap_aes_handle_req(dd); + + pr_debug("exit\n"); + + return err; +} + +/* ********************** ALG API ************************************ */ + +static int omap_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key, + unsigned int keylen) +{ + struct omap_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm); + + if (keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_192 && + keylen != AES_KEYSIZE_256) + return -EINVAL; + + pr_debug("enter, keylen: %d\n", keylen); + + memcpy(ctx->key, key, keylen); + ctx->keylen = keylen; + ctx->flags |= FLAGS_NEW_KEY; + + return 0; +} + +static int omap_aes_ecb_encrypt(struct ablkcipher_request *req) +{ + return omap_aes_crypt(req, FLAGS_ENCRYPT); +} + +static int omap_aes_ecb_decrypt(struct ablkcipher_request *req) +{ + return omap_aes_crypt(req, 0); +} + +static int omap_aes_cbc_encrypt(struct ablkcipher_request *req) +{ + return omap_aes_crypt(req, FLAGS_ENCRYPT | FLAGS_CBC); +} + +static int omap_aes_cbc_decrypt(struct ablkcipher_request *req) +{ + return omap_aes_crypt(req, FLAGS_CBC); +} + +static int omap_aes_cra_init(struct crypto_tfm *tfm) +{ + pr_debug("enter\n"); + + tfm->crt_ablkcipher.reqsize = sizeof(struct omap_aes_reqctx); + + return 0; +} + +static void omap_aes_cra_exit(struct crypto_tfm *tfm) +{ + pr_debug("enter\n"); +} + +/* ********************** ALGS ************************************ */ + +static struct crypto_alg algs[] = { +{ + .cra_name = "ecb(aes)", + .cra_driver_name = "ecb-aes-omap", + .cra_priority = 100, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct omap_aes_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = omap_aes_cra_init, + .cra_exit = omap_aes_cra_exit, + .cra_u.ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = omap_aes_setkey, + .encrypt = omap_aes_ecb_encrypt, + .decrypt = omap_aes_ecb_decrypt, + } +}, +{ + .cra_name = "cbc(aes)", + .cra_driver_name = "cbc-aes-omap", + .cra_priority = 100, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct omap_aes_ctx), + .cra_alignmask = 0, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = omap_aes_cra_init, + .cra_exit = omap_aes_cra_exit, + .cra_u.ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = omap_aes_setkey, + .encrypt = omap_aes_cbc_encrypt, + .decrypt = omap_aes_cbc_decrypt, + } +} +}; + +static int omap_aes_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct omap_aes_dev *dd; + struct resource *res; + int err = -ENOMEM, i, j; + u32 reg; + + dd = kzalloc(sizeof(struct omap_aes_dev), GFP_KERNEL); + if (dd == NULL) { + dev_err(dev, "unable to alloc data struct.\n"); + goto err_data; + } + dd->dev = dev; + platform_set_drvdata(pdev, dd); + + spin_lock_init(&dd->lock); + crypto_init_queue(&dd->queue, OMAP_AES_QUEUE_LENGTH); + + /* Get the base address */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "invalid resource type\n"); + err = -ENODEV; + goto err_res; + } + dd->phys_base = res->start; + + /* Get the DMA */ + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!res) + dev_info(dev, "no DMA info\n"); + else + dd->dma_out = res->start; + + /* Get the DMA */ + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (!res) + dev_info(dev, "no DMA info\n"); + else + dd->dma_in = res->start; + + /* Initializing the clock */ + dd->iclk = clk_get(dev, "ick"); + if (!dd->iclk) { + dev_err(dev, "clock intialization failed.\n"); + err = -ENODEV; + goto err_res; + } + + dd->io_base = ioremap(dd->phys_base, SZ_4K); + if (!dd->io_base) { + dev_err(dev, "can't ioremap\n"); + err = -ENOMEM; + goto err_io; + } + + clk_enable(dd->iclk); + reg = omap_aes_read(dd, AES_REG_REV); + dev_info(dev, "OMAP AES hw accel rev: %u.%u\n", + (reg & AES_REG_REV_MAJOR) >> 4, reg & AES_REG_REV_MINOR); + clk_disable(dd->iclk); + + tasklet_init(&dd->task, omap_aes_task, (unsigned long)dd); + + err = omap_aes_dma_init(dd); + if (err) + goto err_dma; + + INIT_LIST_HEAD(&dd->list); + spin_lock(&list_lock); + list_add_tail(&dd->list, &dev_list); + spin_unlock(&list_lock); + + for (i = 0; i < ARRAY_SIZE(algs); i++) { + pr_debug("i: %d\n", i); + INIT_LIST_HEAD(&algs[i].cra_list); + err = crypto_register_alg(&algs[i]); + if (err) + goto err_algs; + } + + pr_info("probe() done\n"); + + return 0; +err_algs: + for (j = 0; j < i; j++) + crypto_unregister_alg(&algs[j]); + omap_aes_dma_cleanup(dd); +err_dma: + tasklet_kill(&dd->task); + iounmap(dd->io_base); +err_io: + clk_put(dd->iclk); +err_res: + kfree(dd); + dd = NULL; +err_data: + dev_err(dev, "initialization failed.\n"); + return err; +} + +static int omap_aes_remove(struct platform_device *pdev) +{ + struct omap_aes_dev *dd = platform_get_drvdata(pdev); + int i; + + if (!dd) + return -ENODEV; + + spin_lock(&list_lock); + list_del(&dd->list); + spin_unlock(&list_lock); + + for (i = 0; i < ARRAY_SIZE(algs); i++) + crypto_unregister_alg(&algs[i]); + + tasklet_kill(&dd->task); + omap_aes_dma_cleanup(dd); + iounmap(dd->io_base); + clk_put(dd->iclk); + kfree(dd); + dd = NULL; + + return 0; +} + +static struct platform_driver omap_aes_driver = { + .probe = omap_aes_probe, + .remove = omap_aes_remove, + .driver = { + .name = "omap-aes", + .owner = THIS_MODULE, + }, +}; + +static int __init omap_aes_mod_init(void) +{ + pr_info("loading %s driver\n", "omap-aes"); + + if (!cpu_class_is_omap2() || omap_type() != OMAP2_DEVICE_TYPE_SEC) { + pr_err("Unsupported cpu\n"); + return -ENODEV; + } + + return platform_driver_register(&omap_aes_driver); +} + +static void __exit omap_aes_mod_exit(void) +{ + platform_driver_unregister(&omap_aes_driver); +} + +module_init(omap_aes_mod_init); +module_exit(omap_aes_mod_exit); + +MODULE_DESCRIPTION("OMAP AES hw acceleration support."); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Dmitry Kasatkin"); + diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c index 7d148567688..a081c7c7d03 100644 --- a/drivers/crypto/omap-sham.c +++ b/drivers/crypto/omap-sham.c @@ -311,7 +311,8 @@ static int omap_sham_xmit_dma(struct omap_sham_dev *dd, dma_addr_t dma_addr, len32 = DIV_ROUND_UP(length, sizeof(u32)); omap_set_dma_transfer_params(dd->dma_lch, OMAP_DMA_DATA_TYPE_S32, len32, - 1, OMAP_DMA_SYNC_PACKET, dd->dma, OMAP_DMA_DST_SYNC); + 1, OMAP_DMA_SYNC_PACKET, dd->dma, + OMAP_DMA_DST_SYNC_PREFETCH); omap_set_dma_src_params(dd->dma_lch, 0, OMAP_DMA_AMODE_POST_INC, dma_addr, 0, 0); @@ -1072,6 +1073,9 @@ static int omap_sham_dma_init(struct omap_sham_dev *dd) omap_set_dma_dest_burst_mode(dd->dma_lch, OMAP_DMA_DATA_BURST_16); + omap_set_dma_src_burst_mode(dd->dma_lch, + OMAP_DMA_DATA_BURST_4); + return 0; } diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index 4bcd825b573..b879c3f5d7c 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -161,7 +161,7 @@ struct talitos_private { static void to_talitos_ptr(struct talitos_ptr *talitos_ptr, dma_addr_t dma_addr) { talitos_ptr->ptr = cpu_to_be32(lower_32_bits(dma_addr)); - talitos_ptr->eptr = cpu_to_be32(upper_32_bits(dma_addr)); + talitos_ptr->eptr = upper_32_bits(dma_addr); } /* @@ -332,10 +332,9 @@ static int talitos_submit(struct device *dev, struct talitos_desc *desc, /* GO! */ wmb(); - out_be32(priv->reg + TALITOS_FF(ch), - cpu_to_be32(upper_32_bits(request->dma_desc))); + out_be32(priv->reg + TALITOS_FF(ch), upper_32_bits(request->dma_desc)); out_be32(priv->reg + TALITOS_FF_LO(ch), - cpu_to_be32(lower_32_bits(request->dma_desc))); + lower_32_bits(request->dma_desc)); spin_unlock_irqrestore(&priv->chan[ch].head_lock, flags); @@ -1751,14 +1750,14 @@ static int ahash_init_sha224_swinit(struct ahash_request *areq) ahash_init(areq); req_ctx->swinit = 1;/* prevent h/w initting context with sha256 values*/ - req_ctx->hw_context[0] = cpu_to_be32(SHA224_H0); - req_ctx->hw_context[1] = cpu_to_be32(SHA224_H1); - req_ctx->hw_context[2] = cpu_to_be32(SHA224_H2); - req_ctx->hw_context[3] = cpu_to_be32(SHA224_H3); - req_ctx->hw_context[4] = cpu_to_be32(SHA224_H4); - req_ctx->hw_context[5] = cpu_to_be32(SHA224_H5); - req_ctx->hw_context[6] = cpu_to_be32(SHA224_H6); - req_ctx->hw_context[7] = cpu_to_be32(SHA224_H7); + req_ctx->hw_context[0] = SHA224_H0; + req_ctx->hw_context[1] = SHA224_H1; + req_ctx->hw_context[2] = SHA224_H2; + req_ctx->hw_context[3] = SHA224_H3; + req_ctx->hw_context[4] = SHA224_H4; + req_ctx->hw_context[5] = SHA224_H5; + req_ctx->hw_context[6] = SHA224_H6; + req_ctx->hw_context[7] = SHA224_H7; /* init 64-bit count */ req_ctx->hw_context[8] = 0; @@ -2333,8 +2332,7 @@ static int talitos_remove(struct platform_device *ofdev) talitos_unregister_rng(dev); for (i = 0; i < priv->num_channels; i++) - if (priv->chan[i].fifo) - kfree(priv->chan[i].fifo); + kfree(priv->chan[i].fifo); kfree(priv->chan); @@ -2389,6 +2387,9 @@ static struct talitos_crypto_alg *talitos_alg_alloc(struct device *dev, DESC_HDR_MODE0_MDEU_SHA256; } break; + default: + dev_err(dev, "unknown algorithm type %d\n", t_alg->algt.type); + return ERR_PTR(-EINVAL); } alg->cra_module = THIS_MODULE; diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 6369ba7f96f..3052e2969ad 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -56,20 +56,20 @@ menu "Special HID drivers" depends on HID config HID_3M_PCT - tristate "3M PCT" + tristate "3M PCT touchscreen" depends on USB_HID ---help--- Support for 3M PCT touch screens. config HID_A4TECH - tristate "A4 tech" if EMBEDDED + tristate "A4 tech mice" if EMBEDDED depends on USB_HID default !EMBEDDED ---help--- Support for A4 tech X5 and WOP-35 / Trust 450L mice. config HID_ACRUX_FF - tristate "ACRUX force feedback support" + tristate "ACRUX force feedback" depends on USB_HID select INPUT_FF_MEMLESS ---help--- @@ -77,7 +77,7 @@ config HID_ACRUX_FF game controllers. config HID_APPLE - tristate "Apple" if EMBEDDED + tristate "Apple {i,Power,Mac}Books" if EMBEDDED depends on (USB_HID || BT_HIDP) default !EMBEDDED ---help--- @@ -88,7 +88,7 @@ config HID_APPLE MacBooks, MacBook Pros and Apple Aluminum. config HID_BELKIN - tristate "Belkin" if EMBEDDED + tristate "Belkin Flip KVM and Wireless keyboard" if EMBEDDED depends on USB_HID default !EMBEDDED ---help--- @@ -101,14 +101,14 @@ config HID_CANDO Support for Cando dual touch panel. config HID_CHERRY - tristate "Cherry" if EMBEDDED + tristate "Cherry Cymotion keyboard" if EMBEDDED depends on USB_HID default !EMBEDDED ---help--- Support for Cherry Cymotion keyboard. config HID_CHICONY - tristate "Chicony" if EMBEDDED + tristate "Chicony Tactical pad" if EMBEDDED depends on USB_HID default !EMBEDDED ---help--- @@ -130,20 +130,20 @@ config HID_PRODIKEYS and some additional multimedia keys. config HID_CYPRESS - tristate "Cypress" if EMBEDDED + tristate "Cypress mouse and barcode readers" if EMBEDDED depends on USB_HID default !EMBEDDED ---help--- Support for cypress mouse and barcode readers. config HID_DRAGONRISE - tristate "DragonRise Inc. support" + tristate "DragonRise Inc. game controller" depends on USB_HID ---help--- Say Y here if you have DragonRise Inc.game controllers. config DRAGONRISE_FF - bool "DragonRise Inc. force feedback support" + bool "DragonRise Inc. force feedback" depends on HID_DRAGONRISE select INPUT_FF_MEMLESS ---help--- @@ -157,46 +157,58 @@ config HID_EGALAX Support for the eGalax dual-touch panel. config HID_ELECOM - tristate "ELECOM" + tristate "ELECOM BM084 bluetooth mouse" depends on BT_HIDP ---help--- Support for the ELECOM BM084 (bluetooth mouse). config HID_EZKEY - tristate "Ezkey" if EMBEDDED + tristate "Ezkey BTC 8193 keyboard" if EMBEDDED depends on USB_HID default !EMBEDDED ---help--- Support for Ezkey BTC 8193 keyboard. config HID_KYE - tristate "Kye" if EMBEDDED + tristate "Kye/Genius Ergo Mouse" if EMBEDDED depends on USB_HID default !EMBEDDED ---help--- Support for Kye/Genius Ergo Mouse. +config HID_UCLOGIC + tristate "UC-Logic" + depends on USB_HID + ---help--- + Support for UC-Logic tablets. + +config HID_WALTOP + tristate "Waltop" + depends on USB_HID + ---help--- + Support for Waltop tablets. + config HID_GYRATION - tristate "Gyration" + tristate "Gyration remote control" depends on USB_HID ---help--- Support for Gyration remote control. config HID_TWINHAN - tristate "Twinhan" + tristate "Twinhan IR remote control" depends on USB_HID ---help--- Support for Twinhan IR remote control. config HID_KENSINGTON - tristate "Kensington" if EMBEDDED + tristate "Kensington Slimblade Trackball" if EMBEDDED depends on USB_HID default !EMBEDDED ---help--- Support for Kensington Slimblade Trackball. config HID_LOGITECH - tristate "Logitech" if EMBEDDED + tristate "Logitech devices" if EMBEDDED depends on USB_HID default !EMBEDDED ---help--- @@ -220,12 +232,12 @@ config LOGITECH_FF force feedback. config LOGIRUMBLEPAD2_FF - bool "Logitech Rumblepad 2 force feedback support" + bool "Logitech RumblePad/Rumblepad 2 force feedback support" depends on HID_LOGITECH select INPUT_FF_MEMLESS help Say Y here if you want to enable force feedback support for Logitech - Rumblepad 2 devices. + RumblePad and Rumblepad 2 devices. config LOGIG940_FF bool "Logitech Flight System G940 force feedback support" @@ -235,6 +247,14 @@ config LOGIG940_FF Say Y here if you want to enable force feedback support for Logitech Flight System G940 devices. +config LOGIWII_FF + bool "Logitech Speed Force Wireless force feedback support" + depends on HID_LOGITECH + select INPUT_FF_MEMLESS + help + Say Y here if you want to enable force feedback support for Logitech + Speed Force Wireless (Wii) devices. + config HID_MAGICMOUSE tristate "Apple MagicMouse multi-touch support" depends on BT_HIDP @@ -245,39 +265,39 @@ config HID_MAGICMOUSE Apple Wireless "Magic" Mouse. config HID_MICROSOFT - tristate "Microsoft" if EMBEDDED + tristate "Microsoft non-fully HID-compliant devices" if EMBEDDED depends on USB_HID default !EMBEDDED ---help--- Support for Microsoft devices that are not fully compliant with HID standard. config HID_MOSART - tristate "MosArt" + tristate "MosArt dual-touch panels" depends on USB_HID ---help--- Support for MosArt dual-touch panels. config HID_MONTEREY - tristate "Monterey" if EMBEDDED + tristate "Monterey Genius KB29E keyboard" if EMBEDDED depends on USB_HID default !EMBEDDED ---help--- Support for Monterey Genius KB29E. config HID_NTRIG - tristate "NTrig" + tristate "N-Trig touch screen" depends on USB_HID ---help--- Support for N-Trig touch screen. config HID_ORTEK - tristate "Ortek" + tristate "Ortek WKB-2000 wireless keyboard and mouse trackpad" depends on USB_HID ---help--- Support for Ortek WKB-2000 wireless keyboard + mouse trackpad. config HID_PANTHERLORD - tristate "Pantherlord support" + tristate "Pantherlord/GreenAsia game controller" depends on USB_HID ---help--- Say Y here if you have a PantherLord/GreenAsia based game controller @@ -292,7 +312,7 @@ config PANTHERLORD_FF or adapter and want to enable force feedback support for it. config HID_PETALYNX - tristate "Petalynx" + tristate "Petalynx Maxter remote control" depends on USB_HID ---help--- Support for Petalynx Maxter remote control. @@ -356,7 +376,7 @@ config HID_PICOLCD_LEDS Provide access to PicoLCD's GPO pins via leds class. config HID_QUANTA - tristate "Quanta Optical Touch" + tristate "Quanta Optical Touch panels" depends on USB_HID ---help--- Support for Quanta Optical Touch dual-touch panels. @@ -376,32 +396,39 @@ config HID_ROCCAT_KONE ---help--- Support for Roccat Kone mouse. +config HID_ROCCAT_PYRA + tristate "Roccat Pyra mouse support" + depends on USB_HID + select HID_ROCCAT + ---help--- + Support for Roccat Pyra mouse. + config HID_SAMSUNG - tristate "Samsung" + tristate "Samsung InfraRed remote control or keyboards" depends on USB_HID ---help--- Support for Samsung InfraRed remote control or keyboards. config HID_SONY - tristate "Sony" + tristate "Sony PS3 controller" depends on USB_HID ---help--- Support for Sony PS3 controller. config HID_STANTUM - tristate "Stantum" + tristate "Stantum multitouch panel" depends on USB_HID ---help--- Support for Stantum multitouch panel. config HID_SUNPLUS - tristate "Sunplus" + tristate "Sunplus wireless desktop" depends on USB_HID ---help--- Support for Sunplus wireless desktop. config HID_GREENASIA - tristate "GreenAsia (Product ID 0x12) support" + tristate "GreenAsia (Product ID 0x12) game controller support" depends on USB_HID ---help--- Say Y here if you have a GreenAsia (Product ID 0x12) based game diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 46f037f3df8..c335605b920 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -21,6 +21,9 @@ endif ifdef CONFIG_LOGIG940_FF hid-logitech-objs += hid-lg3ff.o endif +ifdef CONFIG_LOGIWII_FF + hid-logitech-objs += hid-lg4ff.o +endif obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o @@ -52,6 +55,7 @@ obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o obj-$(CONFIG_HID_ROCCAT_KONE) += hid-roccat-kone.o +obj-$(CONFIG_HID_ROCCAT_PYRA) += hid-roccat-pyra.o obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o obj-$(CONFIG_HID_SONY) += hid-sony.o @@ -61,9 +65,11 @@ obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o +obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o obj-$(CONFIG_HID_WACOM) += hid-wacom.o +obj-$(CONFIG_HID_WALTOP) += hid-waltop.o obj-$(CONFIG_USB_HID) += usbhid/ obj-$(CONFIG_USB_MOUSE) += usbhid/ diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c index 2a0d56b7a02..02d8cd3b1b1 100644 --- a/drivers/hid/hid-3m-pct.c +++ b/drivers/hid/hid-3m-pct.c @@ -2,6 +2,8 @@ * HID driver for 3M PCT multitouch panels * * Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr> + * Copyright (c) 2010 Henrik Rydberg <rydberg@euromail.se> + * Copyright (c) 2010 Canonical, Ltd. * */ @@ -24,15 +26,26 @@ MODULE_LICENSE("GPL"); #include "hid-ids.h" +#define MAX_SLOTS 60 +#define MAX_TRKID USHRT_MAX +#define MAX_EVENTS 360 + +/* estimated signal-to-noise ratios */ +#define SN_MOVE 2048 +#define SN_WIDTH 128 + struct mmm_finger { __s32 x, y, w, h; - __u8 rank; + __u16 id; + bool prev_touch; bool touch, valid; }; struct mmm_data { - struct mmm_finger f[10]; - __u8 curid, num; + struct mmm_finger f[MAX_SLOTS]; + __u16 id; + __u8 curid; + __u8 nexp, nreal; bool touch, valid; }; @@ -40,6 +53,10 @@ static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { + int f1 = field->logical_minimum; + int f2 = field->logical_maximum; + int df = f2 - f1; + switch (usage->hid & HID_USAGE_PAGE) { case HID_UP_BUTTON: @@ -50,18 +67,20 @@ static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi, case HID_GD_X: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_POSITION_X); + input_set_abs_params(hi->input, ABS_MT_POSITION_X, + f1, f2, df / SN_MOVE, 0); /* touchscreen emulation */ input_set_abs_params(hi->input, ABS_X, - field->logical_minimum, - field->logical_maximum, 0, 0); + f1, f2, df / SN_MOVE, 0); return 1; case HID_GD_Y: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_POSITION_Y); + input_set_abs_params(hi->input, ABS_MT_POSITION_Y, + f1, f2, df / SN_MOVE, 0); /* touchscreen emulation */ input_set_abs_params(hi->input, ABS_Y, - field->logical_minimum, - field->logical_maximum, 0, 0); + f1, f2, df / SN_MOVE, 0); return 1; } return 0; @@ -81,21 +100,31 @@ static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi, case HID_DG_TIPSWITCH: /* touchscreen emulation */ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); + input_set_capability(hi->input, EV_KEY, BTN_TOUCH); return 1; case HID_DG_WIDTH: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MAJOR); + input_set_abs_params(hi->input, ABS_MT_TOUCH_MAJOR, + f1, f2, df / SN_WIDTH, 0); return 1; case HID_DG_HEIGHT: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MINOR); + input_set_abs_params(hi->input, ABS_MT_TOUCH_MINOR, + f1, f2, df / SN_WIDTH, 0); input_set_abs_params(hi->input, ABS_MT_ORIENTATION, - 1, 1, 0, 0); + 0, 1, 0, 0); return 1; case HID_DG_CONTACTID: - field->logical_maximum = 59; + field->logical_maximum = MAX_TRKID; hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TRACKING_ID); + input_set_abs_params(hi->input, ABS_MT_TRACKING_ID, + 0, MAX_TRKID, 0, 0); + if (!hi->input->mt) + input_mt_create_slots(hi->input, MAX_SLOTS); + input_set_events_per_packet(hi->input, MAX_EVENTS); return 1; } /* let hid-input decide for the others */ @@ -113,10 +142,10 @@ static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) { + /* tell hid-input to skip setup of these event types */ if (usage->type == EV_KEY || usage->type == EV_ABS) - clear_bit(usage->code, *bit); - - return 0; + set_bit(usage->type, hi->input->evbit); + return -1; } /* @@ -126,70 +155,49 @@ static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi, static void mmm_filter_event(struct mmm_data *md, struct input_dev *input) { struct mmm_finger *oldest = 0; - bool pressed = false, released = false; int i; - - /* - * we need to iterate on all fingers to decide if we have a press - * or a release event in our touchscreen emulation. - */ - for (i = 0; i < 10; ++i) { + for (i = 0; i < MAX_SLOTS; ++i) { struct mmm_finger *f = &md->f[i]; if (!f->valid) { /* this finger is just placeholder data, ignore */ - } else if (f->touch) { + continue; + } + input_mt_slot(input, i); + if (f->touch) { /* this finger is on the screen */ int wide = (f->w > f->h); - input_event(input, EV_ABS, ABS_MT_TRACKING_ID, i); + /* divided by two to match visual scale of touch */ + int major = max(f->w, f->h) >> 1; + int minor = min(f->w, f->h) >> 1; + + if (!f->prev_touch) + f->id = md->id++; + input_event(input, EV_ABS, ABS_MT_TRACKING_ID, f->id); input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x); input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y); input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide); - input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, - wide ? f->w : f->h); - input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, - wide ? f->h : f->w); - input_mt_sync(input); - /* - * touchscreen emulation: maintain the age rank - * of this finger, decide if we have a press - */ - if (f->rank == 0) { - f->rank = ++(md->num); - if (f->rank == 1) - pressed = true; - } - if (f->rank == 1) + input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); + input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); + /* touchscreen emulation: pick the oldest contact */ + if (!oldest || ((f->id - oldest->id) & (SHRT_MAX + 1))) oldest = f; } else { /* this finger took off the screen */ - /* touchscreen emulation: maintain age rank of others */ - int j; - - for (j = 0; j < 10; ++j) { - struct mmm_finger *g = &md->f[j]; - if (g->rank > f->rank) { - g->rank--; - if (g->rank == 1) - oldest = g; - } - } - f->rank = 0; - --(md->num); - if (md->num == 0) - released = true; + input_event(input, EV_ABS, ABS_MT_TRACKING_ID, -1); } + f->prev_touch = f->touch; f->valid = 0; } /* touchscreen emulation */ if (oldest) { - if (pressed) - input_event(input, EV_KEY, BTN_TOUCH, 1); + input_event(input, EV_KEY, BTN_TOUCH, 1); input_event(input, EV_ABS, ABS_X, oldest->x); input_event(input, EV_ABS, ABS_Y, oldest->y); - } else if (released) { + } else { input_event(input, EV_KEY, BTN_TOUCH, 0); } + input_sync(input); } /* @@ -223,10 +231,12 @@ static int mmm_event(struct hid_device *hid, struct hid_field *field, md->f[md->curid].h = value; break; case HID_DG_CONTACTID: + value = clamp_val(value, 0, MAX_SLOTS - 1); if (md->valid) { md->curid = value; md->f[value].touch = md->touch; md->f[value].valid = 1; + md->nreal++; } break; case HID_GD_X: @@ -238,7 +248,12 @@ static int mmm_event(struct hid_device *hid, struct hid_field *field, md->f[md->curid].y = value; break; case HID_DG_CONTACTCOUNT: - mmm_filter_event(md, input); + if (value) + md->nexp = value; + if (md->nreal >= md->nexp) { + mmm_filter_event(md, input); + md->nreal = 0; + } break; } } @@ -255,6 +270,8 @@ static int mmm_probe(struct hid_device *hdev, const struct hid_device_id *id) int ret; struct mmm_data *md; + hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC; + md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL); if (!md) { dev_err(&hdev->dev, "cannot allocate 3M data\n"); diff --git a/drivers/hid/hid-a4tech.c b/drivers/hid/hid-a4tech.c index 3a2b223c1da..1666c1684e7 100644 --- a/drivers/hid/hid-a4tech.c +++ b/drivers/hid/hid-a4tech.c @@ -133,6 +133,8 @@ static const struct hid_device_id a4_devices[] = { .driver_data = A4_2WHEEL_MOUSE_HACK_7 }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D), .driver_data = A4_2WHEEL_MOUSE_HACK_B8 }, + { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_RP_649), + .driver_data = A4_2WHEEL_MOUSE_HACK_B8 }, { } }; MODULE_DEVICE_TABLE(hid, a4_devices); diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index bba05d0a898..eaeca564a8d 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -246,17 +246,18 @@ static int apple_event(struct hid_device *hdev, struct hid_field *field, /* * MacBook JIS keyboard has wrong logical maximum */ -static void apple_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *apple_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { struct apple_sc *asc = hid_get_drvdata(hdev); - if ((asc->quirks & APPLE_RDESC_JIS) && rsize >= 60 && + if ((asc->quirks & APPLE_RDESC_JIS) && *rsize >= 60 && rdesc[53] == 0x65 && rdesc[59] == 0x65) { dev_info(&hdev->dev, "fixing up MacBook JIS keyboard report " "descriptor\n"); rdesc[53] = rdesc[59] = 0xe7; } + return rdesc; } static void apple_setup_input(struct input_dev *input) diff --git a/drivers/hid/hid-cherry.c b/drivers/hid/hid-cherry.c index 24663a8717b..e880086c231 100644 --- a/drivers/hid/hid-cherry.c +++ b/drivers/hid/hid-cherry.c @@ -26,15 +26,16 @@ * Cherry Cymotion keyboard have an invalid HID report descriptor, * that needs fixing before we can parse it. */ -static void ch_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *ch_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { - if (rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) { + if (*rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) { dev_info(&hdev->dev, "fixing up Cherry Cymotion report " "descriptor\n"); rdesc[11] = rdesc[16] = 0xff; rdesc[12] = rdesc[17] = 0x03; } + return rdesc; } #define ch_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \ diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 3cb6632d451..7832b6e2478 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -388,12 +388,6 @@ static int hid_parser_local(struct hid_parser *parser, struct hid_item *item) __u32 data; unsigned n; - /* Local delimiter could have value 0, which allows size to be 0 */ - if (item->size == 0 && item->tag != HID_LOCAL_ITEM_TAG_DELIMITER) { - dbg_hid("item data expected for local item\n"); - return -1; - } - data = item_udata(item); switch (item->tag) { @@ -651,7 +645,7 @@ int hid_parse_report(struct hid_device *device, __u8 *start, }; if (device->driver->report_fixup) - device->driver->report_fixup(device, start, size); + start = device->driver->report_fixup(device, start, &size); device->rdesc = kmemdup(start, size, GFP_KERNEL); if (device->rdesc == NULL) @@ -1241,6 +1235,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, + { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_RP_649) }, #if defined(CONFIG_HID_ACRUX_FF) || defined(CONFIG_HID_ACRUX_FF_MODULE) { HID_USB_DEVICE(USB_VENDOR_ID_ACRUX, 0x0802) }, #endif @@ -1248,6 +1243,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICTRACKPAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) }, @@ -1327,6 +1323,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_EXTREME_3D) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD_CORD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D) }, @@ -1336,6 +1333,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) }, @@ -1371,12 +1369,15 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) }, + { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM, USB_DEVICE_ID_MTP_STM) }, + { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX, USB_DEVICE_ID_MTP_SITRONIX) }, { HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) }, @@ -1388,8 +1389,16 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) }, { HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, { HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) }, diff --git a/drivers/hid/hid-cypress.c b/drivers/hid/hid-cypress.c index 998b6f443d7..4cd0e234599 100644 --- a/drivers/hid/hid-cypress.c +++ b/drivers/hid/hid-cypress.c @@ -31,16 +31,16 @@ * Some USB barcode readers from cypress have usage min and usage max in * the wrong order */ -static void cp_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); unsigned int i; if (!(quirks & CP_RDESC_SWAPPED_MIN_MAX)) - return; + return rdesc; - for (i = 0; i < rsize - 4; i++) + for (i = 0; i < *rsize - 4; i++) if (rdesc[i] == 0x29 && rdesc[i + 2] == 0x19) { __u8 tmp; @@ -50,6 +50,7 @@ static void cp_report_fixup(struct hid_device *hdev, __u8 *rdesc, rdesc[i + 3] = rdesc[i + 1]; rdesc[i + 1] = tmp; } + return rdesc; } static int cp_input_mapped(struct hid_device *hdev, struct hid_input *hi, diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c index 61a3e572224..75c5e23d09d 100644 --- a/drivers/hid/hid-debug.c +++ b/drivers/hid/hid-debug.c @@ -570,6 +570,8 @@ void hid_debug_event(struct hid_device *hdev, char *buf) buf[i]; list->tail = (list->tail + i) % HID_DEBUG_BUFSIZE; } + + wake_up_interruptible(&hdev->debug_wait); } EXPORT_SYMBOL_GPL(hid_debug_event); diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c index 8ca7f65cf2f..54b017ad258 100644 --- a/drivers/hid/hid-egalax.c +++ b/drivers/hid/hid-egalax.c @@ -31,7 +31,7 @@ struct egalax_data { bool first; /* is this the first finger in the frame? */ bool valid; /* valid finger data, or just placeholder? */ bool activity; /* at least one active finger previously? */ - __u16 lastx, lasty; /* latest valid (x, y) in the frame */ + __u16 lastx, lasty, lastz; /* latest valid (x, y, z) in the frame */ }; static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi, @@ -79,6 +79,10 @@ static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi, case HID_DG_TIPPRESSURE: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_PRESSURE); + /* touchscreen emulation */ + input_set_abs_params(hi->input, ABS_PRESSURE, + field->logical_minimum, + field->logical_maximum, 0, 0); return 1; } return 0; @@ -109,8 +113,8 @@ static void egalax_filter_event(struct egalax_data *td, struct input_dev *input) if (td->valid) { /* emit multitouch events */ input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id); - input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x); - input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y); + input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x >> 3); + input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y >> 3); input_event(input, EV_ABS, ABS_MT_PRESSURE, td->z); input_mt_sync(input); @@ -121,6 +125,7 @@ static void egalax_filter_event(struct egalax_data *td, struct input_dev *input) */ td->lastx = td->x; td->lasty = td->y; + td->lastz = td->z; } /* @@ -129,8 +134,9 @@ static void egalax_filter_event(struct egalax_data *td, struct input_dev *input) * the oldest on the panel, the one we want for single touch */ if (!td->first && td->activity) { - input_event(input, EV_ABS, ABS_X, td->lastx); - input_event(input, EV_ABS, ABS_Y, td->lasty); + input_event(input, EV_ABS, ABS_X, td->lastx >> 3); + input_event(input, EV_ABS, ABS_Y, td->lasty >> 3); + input_event(input, EV_ABS, ABS_PRESSURE, td->lastz); } if (!td->valid) { diff --git a/drivers/hid/hid-elecom.c b/drivers/hid/hid-elecom.c index 7a40878f46b..6e31f305397 100644 --- a/drivers/hid/hid-elecom.c +++ b/drivers/hid/hid-elecom.c @@ -20,14 +20,15 @@ #include "hid-ids.h" -static void elecom_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *elecom_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { - if (rsize >= 48 && rdesc[46] == 0x05 && rdesc[47] == 0x0c) { + if (*rsize >= 48 && rdesc[46] == 0x05 && rdesc[47] == 0x0c) { dev_info(&hdev->dev, "Fixing up Elecom BM084 " "report descriptor.\n"); rdesc[47] = 0x00; } + return rdesc; } static const struct hid_device_id elecom_devices[] = { diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 855aa8e355f..3ee999d3300 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -25,6 +25,7 @@ #define USB_VENDOR_ID_A4TECH 0x09da #define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006 #define USB_DEVICE_ID_A4TECH_X5_005D 0x000a +#define USB_DEVICE_ID_A4TECH_RP_649 0x001a #define USB_VENDOR_ID_AASHIMA 0x06d6 #define USB_DEVICE_ID_AASHIMA_GAMEPAD 0x0025 @@ -63,6 +64,7 @@ #define USB_VENDOR_ID_APPLE 0x05ac #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304 #define USB_DEVICE_ID_APPLE_MAGICMOUSE 0x030d +#define USB_DEVICE_ID_APPLE_MAGICTRACKPAD 0x030e #define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e #define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f #define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214 @@ -142,6 +144,7 @@ #define USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE 0x0051 #define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff #define USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK 0x00d3 +#define USB_DEVICE_ID_CH_AXIS_295 0x001c #define USB_VENDOR_ID_CHERRY 0x046a #define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023 @@ -343,6 +346,7 @@ #define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101 #define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110 #define USB_DEVICE_ID_LOGITECH_HARMONY_LAST 0xc14f +#define USB_DEVICE_ID_LOGITECH_RUMBLEPAD_CORD 0xc20a #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD 0xc211 #define USB_DEVICE_ID_LOGITECH_EXTREME_3D 0xc215 #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2 0xc218 @@ -354,6 +358,7 @@ #define USB_DEVICE_ID_LOGITECH_WINGMAN_FFG 0xc293 #define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295 #define USB_DEVICE_ID_LOGITECH_G25_WHEEL 0xc299 +#define USB_DEVICE_ID_LOGITECH_WII_WHEEL 0xc29c #define USB_DEVICE_ID_LOGITECH_ELITE_KBD 0xc30a #define USB_DEVICE_ID_S510_RECEIVER 0xc50c #define USB_DEVICE_ID_S510_RECEIVER_2 0xc517 @@ -466,6 +471,8 @@ #define USB_VENDOR_ID_ROCCAT 0x1e7d #define USB_DEVICE_ID_ROCCAT_KONE 0x2ced +#define USB_DEVICE_ID_ROCCAT_PYRA_WIRED 0x2c24 +#define USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS 0x2cf6 #define USB_VENDOR_ID_SAITEK 0x06a3 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17 @@ -485,6 +492,12 @@ #define USB_VENDOR_ID_STANTUM 0x1f87 #define USB_DEVICE_ID_MTP 0x0002 +#define USB_VENDOR_ID_STANTUM_STM 0x0483 +#define USB_DEVICE_ID_MTP_STM 0x3261 + +#define USB_VENDOR_ID_STANTUM_SITRONIX 0x1403 +#define USB_DEVICE_ID_MTP_SITRONIX 0x5001 + #define USB_VENDOR_ID_SUN 0x0430 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab @@ -514,8 +527,10 @@ #define USB_VENDOR_ID_UCLOGIC 0x5543 #define USB_DEVICE_ID_UCLOGIC_TABLET_PF1209 0x0042 -#define USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U 0x0003 #define USB_DEVICE_ID_UCLOGIC_TABLET_KNA5 0x6001 +#define USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U 0x0003 +#define USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U 0x0004 +#define USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U 0x0005 #define USB_VENDOR_ID_VERNIER 0x08f7 #define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 @@ -527,6 +542,12 @@ #define USB_VENDOR_ID_WACOM 0x056a #define USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH 0x81 +#define USB_VENDOR_ID_WALTOP 0x172f +#define USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH 0x0032 +#define USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH 0x0034 +#define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH 0x0501 +#define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH 0x0500 + #define USB_VENDOR_ID_WISEGROUP 0x0925 #define USB_DEVICE_ID_SMARTJOY_PLUS 0x0005 #define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 6c03dcc5760..834ef47b76d 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -149,6 +149,83 @@ static int hidinput_setkeycode(struct input_dev *dev, } +/** + * hidinput_calc_abs_res - calculate an absolute axis resolution + * @field: the HID report field to calculate resolution for + * @code: axis code + * + * The formula is: + * (logical_maximum - logical_minimum) + * resolution = ---------------------------------------------------------- + * (physical_maximum - physical_minimum) * 10 ^ unit_exponent + * + * as seen in the HID specification v1.11 6.2.2.7 Global Items. + * + * Only exponent 1 length units are processed. Centimeters are converted to + * inches. Degrees are converted to radians. + */ +static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code) +{ + __s32 unit_exponent = field->unit_exponent; + __s32 logical_extents = field->logical_maximum - + field->logical_minimum; + __s32 physical_extents = field->physical_maximum - + field->physical_minimum; + __s32 prev; + + /* Check if the extents are sane */ + if (logical_extents <= 0 || physical_extents <= 0) + return 0; + + /* + * Verify and convert units. + * See HID specification v1.11 6.2.2.7 Global Items for unit decoding + */ + if (code == ABS_X || code == ABS_Y || code == ABS_Z) { + if (field->unit == 0x11) { /* If centimeters */ + /* Convert to inches */ + prev = logical_extents; + logical_extents *= 254; + if (logical_extents < prev) + return 0; + unit_exponent += 2; + } else if (field->unit != 0x13) { /* If not inches */ + return 0; + } + } else if (code == ABS_RX || code == ABS_RY || code == ABS_RZ) { + if (field->unit == 0x14) { /* If degrees */ + /* Convert to radians */ + prev = logical_extents; + logical_extents *= 573; + if (logical_extents < prev) + return 0; + unit_exponent += 1; + } else if (field->unit != 0x12) { /* If not radians */ + return 0; + } + } else { + return 0; + } + + /* Apply negative unit exponent */ + for (; unit_exponent < 0; unit_exponent++) { + prev = logical_extents; + logical_extents *= 10; + if (logical_extents < prev) + return 0; + } + /* Apply positive unit exponent */ + for (; unit_exponent > 0; unit_exponent--) { + prev = physical_extents; + physical_extents *= 10; + if (physical_extents < prev) + return 0; + } + + /* Calculate resolution */ + return logical_extents / physical_extents; +} + static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_field *field, struct hid_usage *usage) { @@ -336,6 +413,10 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel map_key_clear(BTN_STYLUS); break; + case 0x46: /* TabletPick */ + map_key_clear(BTN_STYLUS2); + break; + default: goto unknown; } break; @@ -537,6 +618,9 @@ mapped: input_set_abs_params(input, usage->code, a, b, (b - a) >> 8, (b - a) >> 4); else input_set_abs_params(input, usage->code, a, b, 0, 0); + input_abs_set_res(input, usage->code, + hidinput_calc_abs_res(field, usage->code)); + /* use a larger default input buffer for MT devices */ if (usage->code == ABS_MT_POSITION_X && input->hint_events_per_packet == 0) input_set_events_per_packet(input, 60); @@ -659,6 +743,9 @@ void hidinput_report_event(struct hid_device *hid, struct hid_report *report) { struct hid_input *hidinput; + if (hid->quirks & HID_QUIRK_NO_INPUT_SYNC) + return; + list_for_each_entry(hidinput, &hid->inputs, list) input_sync(hidinput->input); } diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c index f8871712b7b..817247ee006 100644 --- a/drivers/hid/hid-kye.c +++ b/drivers/hid/hid-kye.c @@ -23,10 +23,10 @@ * - report size 8 count 1 must be size 1 count 8 for button bitfield * - change the button usage range to 4-7 for the extra buttons */ -static void kye_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { - if (rsize >= 74 && + if (*rsize >= 74 && rdesc[61] == 0x05 && rdesc[62] == 0x08 && rdesc[63] == 0x19 && rdesc[64] == 0x08 && rdesc[65] == 0x29 && rdesc[66] == 0x0f && @@ -40,6 +40,7 @@ static void kye_report_fixup(struct hid_device *hdev, __u8 *rdesc, rdesc[72] = 0x01; rdesc[74] = 0x08; } + return rdesc; } static const struct hid_device_id kye_devices[] = { diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c index f6433d8050a..b629fba5a05 100644 --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -7,6 +7,7 @@ * Copyright (c) 2006-2007 Jiri Kosina * Copyright (c) 2007 Paul Walmsley * Copyright (c) 2008 Jiri Slaby + * Copyright (c) 2010 Hendrik Iben */ /* @@ -19,6 +20,9 @@ #include <linux/device.h> #include <linux/hid.h> #include <linux/module.h> +#include <linux/random.h> +#include <linux/sched.h> +#include <linux/wait.h> #include "hid-ids.h" #include "hid-lg.h" @@ -35,31 +39,43 @@ #define LG_FF2 0x400 #define LG_RDESC_REL_ABS 0x800 #define LG_FF3 0x1000 +#define LG_FF4 0x2000 /* * Certain Logitech keyboards send in report #3 keys which are far * above the logical maximum described in descriptor. This extends * the original value of 0x28c of logical maximum to 0x104d */ -static void lg_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *lg_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); - if ((quirks & LG_RDESC) && rsize >= 90 && rdesc[83] == 0x26 && + if ((quirks & LG_RDESC) && *rsize >= 90 && rdesc[83] == 0x26 && rdesc[84] == 0x8c && rdesc[85] == 0x02) { dev_info(&hdev->dev, "fixing up Logitech keyboard report " "descriptor\n"); rdesc[84] = rdesc[89] = 0x4d; rdesc[85] = rdesc[90] = 0x10; } - if ((quirks & LG_RDESC_REL_ABS) && rsize >= 50 && + if ((quirks & LG_RDESC_REL_ABS) && *rsize >= 50 && rdesc[32] == 0x81 && rdesc[33] == 0x06 && rdesc[49] == 0x81 && rdesc[50] == 0x06) { dev_info(&hdev->dev, "fixing up rel/abs in Logitech " "report descriptor\n"); rdesc[33] = rdesc[50] = 0x02; } + if ((quirks & LG_FF4) && *rsize >= 101 && + rdesc[41] == 0x95 && rdesc[42] == 0x0B && + rdesc[47] == 0x05 && rdesc[48] == 0x09) { + dev_info(&hdev->dev, "fixing up Logitech Speed Force Wireless " + "button descriptor\n"); + rdesc[41] = 0x05; + rdesc[42] = 0x09; + rdesc[47] = 0x95; + rdesc[48] = 0x0B; + } + return rdesc; } #define lg_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \ @@ -285,12 +301,33 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id) goto err_free; } + if (quirks & LG_FF4) { + unsigned char buf[] = { 0x00, 0xAF, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + + ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT); + + if (ret >= 0) { + /* insert a little delay of 10 jiffies ~ 40ms */ + wait_queue_head_t wait; + init_waitqueue_head (&wait); + wait_event_interruptible_timeout(wait, 0, 10); + + /* Select random Address */ + buf[1] = 0xB2; + get_random_bytes(&buf[2], 2); + + ret = hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT); + } + } + if (quirks & LG_FF) lgff_init(hdev); if (quirks & LG_FF2) lg2ff_init(hdev); if (quirks & LG_FF3) lg3ff_init(hdev); + if (quirks & LG_FF4) + lg4ff_init(hdev); return 0; err_free: @@ -325,6 +362,8 @@ static const struct hid_device_id lg_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL), .driver_data = LG_NOGET | LG_FF }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD_CORD), + .driver_data = LG_FF2 }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD), .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2), @@ -339,6 +378,8 @@ static const struct hid_device_id lg_devices[] = { .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL), .driver_data = LG_FF }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL), + .driver_data = LG_FF4 }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ), .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2), diff --git a/drivers/hid/hid-lg.h b/drivers/hid/hid-lg.h index ce2ac867262..b0100ba2ae0 100644 --- a/drivers/hid/hid-lg.h +++ b/drivers/hid/hid-lg.h @@ -19,4 +19,10 @@ int lg3ff_init(struct hid_device *hdev); static inline int lg3ff_init(struct hid_device *hdev) { return -1; } #endif +#ifdef CONFIG_LOGIWII_FF +int lg4ff_init(struct hid_device *hdev); +#else +static inline int lg4ff_init(struct hid_device *hdev) { return -1; } +#endif + #endif diff --git a/drivers/hid/hid-lg2ff.c b/drivers/hid/hid-lg2ff.c index d888f1e6794..4258253c36b 100644 --- a/drivers/hid/hid-lg2ff.c +++ b/drivers/hid/hid-lg2ff.c @@ -1,5 +1,5 @@ /* - * Force feedback support for Logitech Rumblepad 2 + * Force feedback support for Logitech RumblePad and Rumblepad 2 * * Copyright (c) 2008 Anssi Hannula <anssi.hannula@gmail.com> */ @@ -110,7 +110,7 @@ int lg2ff_init(struct hid_device *hid) usbhid_submit_report(hid, report, USB_DIR_OUT); - dev_info(&hid->dev, "Force feedback for Logitech Rumblepad 2 by " + dev_info(&hid->dev, "Force feedback for Logitech RumblePad/Rumblepad 2 by " "Anssi Hannula <anssi.hannula@gmail.com>\n"); return 0; diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c new file mode 100644 index 00000000000..7eef5a2ce94 --- /dev/null +++ b/drivers/hid/hid-lg4ff.c @@ -0,0 +1,136 @@ +/* + * Force feedback support for Logitech Speed Force Wireless + * + * http://wiibrew.org/wiki/Logitech_USB_steering_wheel + * + * Copyright (c) 2010 Simon Wood <simon@mungewell.org> + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#include <linux/input.h> +#include <linux/usb.h> +#include <linux/hid.h> + +#include "usbhid/usbhid.h" +#include "hid-lg.h" + +struct lg4ff_device { + struct hid_report *report; +}; + +static const signed short ff4_wheel_ac[] = { + FF_CONSTANT, + FF_AUTOCENTER, + -1 +}; + +static int hid_lg4ff_play(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct hid_device *hid = input_get_drvdata(dev); + struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; + struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + int x; + +#define CLAMP(x) if (x < 0) x = 0; if (x > 0xff) x = 0xff + + switch (effect->type) { + case FF_CONSTANT: + x = effect->u.ramp.start_level + 0x80; /* 0x80 is no force */ + CLAMP(x); + report->field[0]->value[0] = 0x11; /* Slot 1 */ + report->field[0]->value[1] = 0x10; + report->field[0]->value[2] = x; + report->field[0]->value[3] = 0x00; + report->field[0]->value[4] = 0x00; + report->field[0]->value[5] = 0x08; + report->field[0]->value[6] = 0x00; + dbg_hid("Autocenter, x=0x%02X\n", x); + + usbhid_submit_report(hid, report, USB_DIR_OUT); + break; + } + return 0; +} + +static void hid_lg4ff_set_autocenter(struct input_dev *dev, u16 magnitude) +{ + struct hid_device *hid = input_get_drvdata(dev); + struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; + struct hid_report *report = list_entry(report_list->next, struct hid_report, list); + __s32 *value = report->field[0]->value; + + *value++ = 0xfe; + *value++ = 0x0d; + *value++ = 0x07; + *value++ = 0x07; + *value++ = (magnitude >> 8) & 0xff; + *value++ = 0x00; + *value = 0x00; + + usbhid_submit_report(hid, report, USB_DIR_OUT); +} + + +int lg4ff_init(struct hid_device *hid) +{ + struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); + struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list; + struct input_dev *dev = hidinput->input; + struct hid_report *report; + struct hid_field *field; + const signed short *ff_bits = ff4_wheel_ac; + int error; + int i; + + /* Find the report to use */ + if (list_empty(report_list)) { + err_hid("No output report found"); + return -1; + } + + /* Check that the report looks ok */ + report = list_entry(report_list->next, struct hid_report, list); + if (!report) { + err_hid("NULL output report"); + return -1; + } + + field = report->field[0]; + if (!field) { + err_hid("NULL field"); + return -1; + } + + for (i = 0; ff_bits[i] >= 0; i++) + set_bit(ff_bits[i], dev->ffbit); + + error = input_ff_create_memless(dev, NULL, hid_lg4ff_play); + + if (error) + return error; + + if (test_bit(FF_AUTOCENTER, dev->ffbit)) + dev->ff->set_autocenter = hid_lg4ff_set_autocenter; + + dev_info(&hid->dev, "Force feedback for Logitech Speed Force Wireless by " + "Simon Wood <simon@mungewell.org>\n"); + return 0; +} + diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 319b0e57ee4..e6dc1517166 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -2,6 +2,7 @@ * Apple "Magic" Wireless Mouse driver * * Copyright (c) 2010 Michael Poole <mdpoole@troilus.org> + * Copyright (c) 2010 Chase Douglas <chase.douglas@canonical.com> */ /* @@ -53,7 +54,9 @@ static bool report_undeciphered; module_param(report_undeciphered, bool, 0644); MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state field using a MSC_RAW event"); -#define TOUCH_REPORT_ID 0x29 +#define TRACKPAD_REPORT_ID 0x28 +#define MOUSE_REPORT_ID 0x29 +#define DOUBLE_REPORT_ID 0xf7 /* These definitions are not precise, but they're close enough. (Bits * 0x03 seem to indicate the aspect ratio of the touch, bits 0x70 seem * to be some kind of bit mask -- 0x20 may be a near-field reading, @@ -67,15 +70,19 @@ MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state fie #define SCROLL_ACCEL_DEFAULT 7 +/* Single touch emulation should only begin when no touches are currently down. + * This is true when single_touch_id is equal to NO_TOUCHES. If multiple touches + * are down and the touch providing for single touch emulation is lifted, + * single_touch_id is equal to SINGLE_TOUCH_UP. While single touch emulation is + * occuring, single_touch_id corresponds with the tracking id of the touch used. + */ +#define NO_TOUCHES -1 +#define SINGLE_TOUCH_UP -2 + /** * struct magicmouse_sc - Tracks Magic Mouse-specific data. * @input: Input device through which we report events. * @quirks: Currently unused. - * @last_timestamp: Timestamp from most recent (18-bit) touch report - * (units of milliseconds over short windows, but seems to - * increase faster when there are no touches). - * @delta_time: 18-bit difference between the two most recent touch - * reports from the mouse. * @ntouches: Number of touches in most recent touch report. * @scroll_accel: Number of consecutive scroll motions. * @scroll_jiffies: Time of last scroll motion. @@ -86,8 +93,6 @@ struct magicmouse_sc { struct input_dev *input; unsigned long quirks; - int last_timestamp; - int delta_time; int ntouches; int scroll_accel; unsigned long scroll_jiffies; @@ -98,9 +103,9 @@ struct magicmouse_sc { short scroll_x; short scroll_y; u8 size; - u8 down; } touches[16]; int tracking_ids[16]; + int single_touch_id; }; static int magicmouse_firm_touch(struct magicmouse_sc *msc) @@ -166,18 +171,35 @@ static void magicmouse_emit_buttons(struct magicmouse_sc *msc, int state) static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tdata) { struct input_dev *input = msc->input; - __s32 x_y = tdata[0] << 8 | tdata[1] << 16 | tdata[2] << 24; - int misc = tdata[5] | tdata[6] << 8; - int id = (misc >> 6) & 15; - int x = x_y << 12 >> 20; - int y = -(x_y >> 20); - int down = (tdata[7] & TOUCH_STATE_MASK) != TOUCH_STATE_NONE; + int id, x, y, size, orientation, touch_major, touch_minor, state, down; + + if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) { + id = (tdata[6] << 2 | tdata[5] >> 6) & 0xf; + x = (tdata[1] << 28 | tdata[0] << 20) >> 20; + y = -((tdata[2] << 24 | tdata[1] << 16) >> 20); + size = tdata[5] & 0x3f; + orientation = (tdata[6] >> 2) - 32; + touch_major = tdata[3]; + touch_minor = tdata[4]; + state = tdata[7] & TOUCH_STATE_MASK; + down = state != TOUCH_STATE_NONE; + } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */ + id = (tdata[7] << 2 | tdata[6] >> 6) & 0xf; + x = (tdata[1] << 27 | tdata[0] << 19) >> 19; + y = -((tdata[3] << 30 | tdata[2] << 22 | tdata[1] << 14) >> 19); + size = tdata[6] & 0x3f; + orientation = (tdata[7] >> 2) - 32; + touch_major = tdata[4]; + touch_minor = tdata[5]; + state = tdata[8] & TOUCH_STATE_MASK; + down = state != TOUCH_STATE_NONE; + } /* Store tracking ID and other fields. */ msc->tracking_ids[raw_id] = id; msc->touches[id].x = x; msc->touches[id].y = y; - msc->touches[id].size = misc & 63; + msc->touches[id].size = size; /* If requested, emulate a scroll wheel by detecting small * vertical touch motions. @@ -188,7 +210,7 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda int step_y = msc->touches[id].scroll_y - y; /* Calculate and apply the scroll motion. */ - switch (tdata[7] & TOUCH_STATE_MASK) { + switch (state) { case TOUCH_STATE_START: msc->touches[id].scroll_x = x; msc->touches[id].scroll_y = y; @@ -222,21 +244,28 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda } } + if (down) { + msc->ntouches++; + if (msc->single_touch_id == NO_TOUCHES) + msc->single_touch_id = id; + } else if (msc->single_touch_id == id) + msc->single_touch_id = SINGLE_TOUCH_UP; + /* Generate the input events for this touch. */ if (report_touches && down) { - int orientation = (misc >> 10) - 32; - - msc->touches[id].down = 1; - input_report_abs(input, ABS_MT_TRACKING_ID, id); - input_report_abs(input, ABS_MT_TOUCH_MAJOR, tdata[3]); - input_report_abs(input, ABS_MT_TOUCH_MINOR, tdata[4]); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, touch_major << 2); + input_report_abs(input, ABS_MT_TOUCH_MINOR, touch_minor << 2); input_report_abs(input, ABS_MT_ORIENTATION, orientation); input_report_abs(input, ABS_MT_POSITION_X, x); input_report_abs(input, ABS_MT_POSITION_Y, y); - if (report_undeciphered) - input_event(input, EV_MSC, MSC_RAW, tdata[7]); + if (report_undeciphered) { + if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) + input_event(input, EV_MSC, MSC_RAW, tdata[7]); + else /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */ + input_event(input, EV_MSC, MSC_RAW, tdata[8]); + } input_mt_sync(input); } @@ -247,39 +276,43 @@ static int magicmouse_raw_event(struct hid_device *hdev, { struct magicmouse_sc *msc = hid_get_drvdata(hdev); struct input_dev *input = msc->input; - int x, y, ts, ii, clicks, last_up; + int x = 0, y = 0, ii, clicks = 0, npoints; switch (data[0]) { - case 0x10: - if (size != 6) + case TRACKPAD_REPORT_ID: + /* Expect four bytes of prefix, and N*9 bytes of touch data. */ + if (size < 4 || ((size - 4) % 9) != 0) return 0; - x = (__s16)(data[2] | data[3] << 8); - y = (__s16)(data[4] | data[5] << 8); + npoints = (size - 4) / 9; + msc->ntouches = 0; + for (ii = 0; ii < npoints; ii++) + magicmouse_emit_touch(msc, ii, data + ii * 9 + 4); + + /* We don't need an MT sync here because trackpad emits a + * BTN_TOUCH event in a new frame when all touches are released. + */ + if (msc->ntouches == 0) + msc->single_touch_id = NO_TOUCHES; + clicks = data[1]; + + /* The following bits provide a device specific timestamp. They + * are unused here. + * + * ts = data[1] >> 6 | data[2] << 2 | data[3] << 10; + */ break; - case TOUCH_REPORT_ID: + case MOUSE_REPORT_ID: /* Expect six bytes of prefix, and N*8 bytes of touch data. */ if (size < 6 || ((size - 6) % 8) != 0) return 0; - ts = data[3] >> 6 | data[4] << 2 | data[5] << 10; - msc->delta_time = (ts - msc->last_timestamp) & 0x3ffff; - msc->last_timestamp = ts; - msc->ntouches = (size - 6) / 8; - for (ii = 0; ii < msc->ntouches; ii++) + npoints = (size - 6) / 8; + msc->ntouches = 0; + for (ii = 0; ii < npoints; ii++) magicmouse_emit_touch(msc, ii, data + ii * 8 + 6); - if (report_touches) { - last_up = 1; - for (ii = 0; ii < ARRAY_SIZE(msc->touches); ii++) { - if (msc->touches[ii].down) { - last_up = 0; - msc->touches[ii].down = 0; - } - } - if (last_up) { - input_mt_sync(input); - } - } + if (report_touches && msc->ntouches == 0) + input_mt_sync(input); /* When emulating three-button mode, it is important * to have the current touch information before @@ -288,68 +321,72 @@ static int magicmouse_raw_event(struct hid_device *hdev, x = (int)(((data[3] & 0x0c) << 28) | (data[1] << 22)) >> 22; y = (int)(((data[3] & 0x30) << 26) | (data[2] << 22)) >> 22; clicks = data[3]; + + /* The following bits provide a device specific timestamp. They + * are unused here. + * + * ts = data[3] >> 6 | data[4] << 2 | data[5] << 10; + */ + break; + case DOUBLE_REPORT_ID: + /* Sometimes the trackpad sends two touch reports in one + * packet. + */ + magicmouse_raw_event(hdev, report, data + 2, data[1]); + magicmouse_raw_event(hdev, report, data + 2 + data[1], + size - 2 - data[1]); break; - case 0x20: /* Theoretically battery status (0-100), but I have - * never seen it -- maybe it is only upon request. - */ - case 0x60: /* Unknown, maybe laser on/off. */ - case 0x61: /* Laser reflection status change. - * data[1]: 0 = spotted, 1 = lost - */ default: return 0; } - magicmouse_emit_buttons(msc, clicks & 3); - input_report_rel(input, REL_X, x); - input_report_rel(input, REL_Y, y); + if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) { + magicmouse_emit_buttons(msc, clicks & 3); + input_report_rel(input, REL_X, x); + input_report_rel(input, REL_Y, y); + } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */ + input_report_key(input, BTN_MOUSE, clicks & 1); + input_report_key(input, BTN_TOUCH, msc->ntouches > 0); + input_report_key(input, BTN_TOOL_FINGER, msc->ntouches == 1); + input_report_key(input, BTN_TOOL_DOUBLETAP, msc->ntouches == 2); + input_report_key(input, BTN_TOOL_TRIPLETAP, msc->ntouches == 3); + input_report_key(input, BTN_TOOL_QUADTAP, msc->ntouches == 4); + if (msc->single_touch_id >= 0) { + input_report_abs(input, ABS_X, + msc->touches[msc->single_touch_id].x); + input_report_abs(input, ABS_Y, + msc->touches[msc->single_touch_id].y); + } + } + input_sync(input); return 1; } -static int magicmouse_input_open(struct input_dev *dev) -{ - struct hid_device *hid = input_get_drvdata(dev); - - return hid->ll_driver->open(hid); -} - -static void magicmouse_input_close(struct input_dev *dev) -{ - struct hid_device *hid = input_get_drvdata(dev); - - hid->ll_driver->close(hid); -} - static void magicmouse_setup_input(struct input_dev *input, struct hid_device *hdev) { - input_set_drvdata(input, hdev); - input->event = hdev->ll_driver->hidinput_input_event; - input->open = magicmouse_input_open; - input->close = magicmouse_input_close; - - input->name = hdev->name; - input->phys = hdev->phys; - input->uniq = hdev->uniq; - input->id.bustype = hdev->bus; - input->id.vendor = hdev->vendor; - input->id.product = hdev->product; - input->id.version = hdev->version; - input->dev.parent = hdev->dev.parent; - __set_bit(EV_KEY, input->evbit); - __set_bit(BTN_LEFT, input->keybit); - __set_bit(BTN_RIGHT, input->keybit); - if (emulate_3button) - __set_bit(BTN_MIDDLE, input->keybit); - __set_bit(BTN_TOOL_FINGER, input->keybit); - - __set_bit(EV_REL, input->evbit); - __set_bit(REL_X, input->relbit); - __set_bit(REL_Y, input->relbit); - if (emulate_scroll_wheel) { - __set_bit(REL_WHEEL, input->relbit); - __set_bit(REL_HWHEEL, input->relbit); + + if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) { + __set_bit(BTN_LEFT, input->keybit); + __set_bit(BTN_RIGHT, input->keybit); + if (emulate_3button) + __set_bit(BTN_MIDDLE, input->keybit); + + __set_bit(EV_REL, input->evbit); + __set_bit(REL_X, input->relbit); + __set_bit(REL_Y, input->relbit); + if (emulate_scroll_wheel) { + __set_bit(REL_WHEEL, input->relbit); + __set_bit(REL_HWHEEL, input->relbit); + } + } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */ + __set_bit(BTN_MOUSE, input->keybit); + __set_bit(BTN_TOOL_FINGER, input->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input->keybit); + __set_bit(BTN_TOOL_QUADTAP, input->keybit); + __set_bit(BTN_TOUCH, input->keybit); } if (report_touches) { @@ -359,16 +396,26 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0); input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0); input_set_abs_params(input, ABS_MT_ORIENTATION, -32, 31, 1, 0); - input_set_abs_params(input, ABS_MT_POSITION_X, -1100, 1358, - 4, 0); + /* Note: Touch Y position from the device is inverted relative * to how pointer motion is reported (and relative to how USB * HID recommends the coordinates work). This driver keeps * the origin at the same position, and just uses the additive * inverse of the reported Y. */ - input_set_abs_params(input, ABS_MT_POSITION_Y, -1589, 2047, - 4, 0); + if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) { + input_set_abs_params(input, ABS_MT_POSITION_X, -1100, + 1358, 4, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, -1589, + 2047, 4, 0); + } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */ + input_set_abs_params(input, ABS_X, -2909, 3167, 4, 0); + input_set_abs_params(input, ABS_Y, -2456, 2565, 4, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, -2909, + 3167, 4, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, -2456, + 2565, 4, 0); + } } if (report_undeciphered) { @@ -377,12 +424,22 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h } } +static int magicmouse_input_mapping(struct hid_device *hdev, + struct hid_input *hi, struct hid_field *field, + struct hid_usage *usage, unsigned long **bit, int *max) +{ + struct magicmouse_sc *msc = hid_get_drvdata(hdev); + + if (!msc->input) + msc->input = hi->input; + + return 0; +} + static int magicmouse_probe(struct hid_device *hdev, const struct hid_device_id *id) { - __u8 feature_1[] = { 0xd7, 0x01 }; - __u8 feature_2[] = { 0xf8, 0x01, 0x32 }; - struct input_dev *input; + __u8 feature[] = { 0xd7, 0x01 }; struct magicmouse_sc *msc; struct hid_report *report; int ret; @@ -398,6 +455,8 @@ static int magicmouse_probe(struct hid_device *hdev, msc->quirks = id->driver_data; hid_set_drvdata(hdev, msc); + msc->single_touch_id = NO_TOUCHES; + ret = hid_parse(hdev); if (ret) { dev_err(&hdev->dev, "magicmouse hid parse failed\n"); @@ -410,10 +469,22 @@ static int magicmouse_probe(struct hid_device *hdev, goto err_free; } - /* we are handling the input ourselves */ - hidinput_disconnect(hdev); + /* We do this after hid-input is done parsing reports so that + * hid-input uses the most natural button and axis IDs. + */ + if (msc->input) + magicmouse_setup_input(msc->input, hdev); + + if (id->product == USB_DEVICE_ID_APPLE_MAGICMOUSE) + report = hid_register_report(hdev, HID_INPUT_REPORT, + MOUSE_REPORT_ID); + else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */ + report = hid_register_report(hdev, HID_INPUT_REPORT, + TRACKPAD_REPORT_ID); + report = hid_register_report(hdev, HID_INPUT_REPORT, + DOUBLE_REPORT_ID); + } - report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID); if (!report) { dev_err(&hdev->dev, "unable to register touch report\n"); ret = -ENOMEM; @@ -421,39 +492,15 @@ static int magicmouse_probe(struct hid_device *hdev, } report->size = 6; - ret = hdev->hid_output_raw_report(hdev, feature_1, sizeof(feature_1), + ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature), HID_FEATURE_REPORT); - if (ret != sizeof(feature_1)) { - dev_err(&hdev->dev, "unable to request touch data (1:%d)\n", - ret); - goto err_stop_hw; - } - ret = hdev->hid_output_raw_report(hdev, feature_2, - sizeof(feature_2), HID_FEATURE_REPORT); - if (ret != sizeof(feature_2)) { - dev_err(&hdev->dev, "unable to request touch data (2:%d)\n", + if (ret != sizeof(feature)) { + dev_err(&hdev->dev, "unable to request touch data (%d)\n", ret); goto err_stop_hw; } - input = input_allocate_device(); - if (!input) { - dev_err(&hdev->dev, "can't alloc input device\n"); - ret = -ENOMEM; - goto err_stop_hw; - } - magicmouse_setup_input(input, hdev); - - ret = input_register_device(input); - if (ret) { - dev_err(&hdev->dev, "input device registration failed\n"); - goto err_input; - } - msc->input = input; - return 0; -err_input: - input_free_device(input); err_stop_hw: hid_hw_stop(hdev); err_free: @@ -466,13 +513,14 @@ static void magicmouse_remove(struct hid_device *hdev) struct magicmouse_sc *msc = hid_get_drvdata(hdev); hid_hw_stop(hdev); - input_unregister_device(msc->input); kfree(msc); } static const struct hid_device_id magic_mice[] = { - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE), - .driver_data = 0 }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, + USB_DEVICE_ID_APPLE_MAGICMOUSE), .driver_data = 0 }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, + USB_DEVICE_ID_APPLE_MAGICTRACKPAD), .driver_data = 0 }, { } }; MODULE_DEVICE_TABLE(hid, magic_mice); @@ -483,6 +531,7 @@ static struct hid_driver magicmouse_driver = { .probe = magicmouse_probe, .remove = magicmouse_remove, .raw_event = magicmouse_raw_event, + .input_mapping = magicmouse_input_mapping, }; static int __init magicmouse_init(void) diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index 359cc447c6c..dc618c33d0a 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -33,18 +33,19 @@ * Microsoft Wireless Desktop Receiver (Model 1028) has * 'Usage Min/Max' where it ought to have 'Physical Min/Max' */ -static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); - if ((quirks & MS_RDESC) && rsize == 571 && rdesc[557] == 0x19 && + if ((quirks & MS_RDESC) && *rsize == 571 && rdesc[557] == 0x19 && rdesc[559] == 0x29) { dev_info(&hdev->dev, "fixing up Microsoft Wireless Receiver " "Model 1028 report descriptor\n"); rdesc[557] = 0x35; rdesc[559] = 0x45; } + return rdesc; } #define ms_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \ diff --git a/drivers/hid/hid-monterey.c b/drivers/hid/hid-monterey.c index 2cd05aa244b..c95c31e2d86 100644 --- a/drivers/hid/hid-monterey.c +++ b/drivers/hid/hid-monterey.c @@ -22,14 +22,15 @@ #include "hid-ids.h" -static void mr_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *mr_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { - if (rsize >= 30 && rdesc[29] == 0x05 && rdesc[30] == 0x09) { + if (*rsize >= 30 && rdesc[29] == 0x05 && rdesc[30] == 0x09) { dev_info(&hdev->dev, "fixing up button/consumer in HID report " "descriptor\n"); rdesc[30] = 0x0c; } + return rdesc; } #define mr_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \ diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c index fb69b8c4953..69169efa1e1 100644 --- a/drivers/hid/hid-ntrig.c +++ b/drivers/hid/hid-ntrig.c @@ -90,6 +90,55 @@ struct ntrig_data { }; +/* + * This function converts the 4 byte raw firmware code into + * a string containing 5 comma separated numbers. + */ +static int ntrig_version_string(unsigned char *raw, char *buf) +{ + __u8 a = (raw[1] & 0x0e) >> 1; + __u8 b = (raw[0] & 0x3c) >> 2; + __u8 c = ((raw[0] & 0x03) << 3) | ((raw[3] & 0xe0) >> 5); + __u8 d = ((raw[3] & 0x07) << 3) | ((raw[2] & 0xe0) >> 5); + __u8 e = raw[2] & 0x07; + + /* + * As yet unmapped bits: + * 0b11000000 0b11110001 0b00011000 0b00011000 + */ + + return sprintf(buf, "%u.%u.%u.%u.%u", a, b, c, d, e); +} + +static void ntrig_report_version(struct hid_device *hdev) +{ + int ret; + char buf[20]; + struct usb_device *usb_dev = hid_to_usb_dev(hdev); + unsigned char *data = kmalloc(8, GFP_KERNEL); + + if (!data) + goto err_free; + + ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | + USB_DIR_IN, + 0x30c, 1, data, 8, + USB_CTRL_SET_TIMEOUT); + + if (ret == 8) { + ret = ntrig_version_string(&data[2], buf); + + dev_info(&hdev->dev, + "Firmware version: %s (%02x%02x %02x%02x)\n", + buf, data[2], data[3], data[4], data[5]); + } + +err_free: + kfree(data); +} + static ssize_t show_phys_width(struct device *dev, struct device_attribute *attr, char *buf) @@ -377,8 +426,8 @@ static struct attribute_group ntrig_attribute_group = { */ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) { struct ntrig_data *nd = hid_get_drvdata(hdev); @@ -448,13 +497,13 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi, /* width/height mapped on TouchMajor/TouchMinor/Orientation */ case HID_DG_WIDTH: hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_TOUCH_MAJOR); + EV_ABS, ABS_MT_TOUCH_MAJOR); return 1; case HID_DG_HEIGHT: hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_TOUCH_MINOR); + EV_ABS, ABS_MT_TOUCH_MINOR); input_set_abs_params(hi->input, ABS_MT_ORIENTATION, - 0, 1, 0, 0); + 0, 1, 0, 0); return 1; } return 0; @@ -468,8 +517,8 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi, } static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) { /* No special mappings needed for the pen and single touch */ if (field->physical) @@ -489,7 +538,7 @@ static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi, * and call input_mt_sync after each point if necessary */ static int ntrig_event (struct hid_device *hid, struct hid_field *field, - struct hid_usage *usage, __s32 value) + struct hid_usage *usage, __s32 value) { struct input_dev *input = field->hidinput->input; struct ntrig_data *nd = hid_get_drvdata(hid); @@ -848,6 +897,8 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id) if (report) usbhid_submit_report(hdev, report, USB_DIR_OUT); + ntrig_report_version(hdev); + ret = sysfs_create_group(&hdev->dev.kobj, &ntrig_attribute_group); @@ -860,7 +911,7 @@ err_free: static void ntrig_remove(struct hid_device *hdev) { sysfs_remove_group(&hdev->dev.kobj, - &ntrig_attribute_group); + &ntrig_attribute_group); hid_hw_stop(hdev); kfree(hid_get_drvdata(hdev)); } diff --git a/drivers/hid/hid-ortek.c b/drivers/hid/hid-ortek.c index aa9a960f73a..2e79716dca3 100644 --- a/drivers/hid/hid-ortek.c +++ b/drivers/hid/hid-ortek.c @@ -19,14 +19,15 @@ #include "hid-ids.h" -static void ortek_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *ortek_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { - if (rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x01) { + if (*rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x01) { dev_info(&hdev->dev, "Fixing up Ortek WKB-2000 " "report descriptor.\n"); rdesc[55] = 0x92; } + return rdesc; } static const struct hid_device_id ortek_devices[] = { diff --git a/drivers/hid/hid-petalynx.c b/drivers/hid/hid-petalynx.c index 500fbd0652d..308d6ae48a3 100644 --- a/drivers/hid/hid-petalynx.c +++ b/drivers/hid/hid-petalynx.c @@ -23,10 +23,10 @@ #include "hid-ids.h" /* Petalynx Maxter Remote has maximum for consumer page set too low */ -static void pl_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *pl_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { - if (rsize >= 60 && rdesc[39] == 0x2a && rdesc[40] == 0xf5 && + if (*rsize >= 60 && rdesc[39] == 0x2a && rdesc[40] == 0xf5 && rdesc[41] == 0x00 && rdesc[59] == 0x26 && rdesc[60] == 0xf9 && rdesc[61] == 0x00) { dev_info(&hdev->dev, "fixing up Petalynx Maxter Remote report " @@ -34,6 +34,7 @@ static void pl_report_fixup(struct hid_device *hdev, __u8 *rdesc, rdesc[60] = 0xfa; rdesc[40] = 0xfa; } + return rdesc; } #define pl_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \ diff --git a/drivers/hid/hid-prodikeys.c b/drivers/hid/hid-prodikeys.c index 845f428b809..48eab84f53b 100644 --- a/drivers/hid/hid-prodikeys.c +++ b/drivers/hid/hid-prodikeys.c @@ -740,10 +740,10 @@ int pcmidi_snd_terminate(struct pcmidi_snd *pm) /* * PC-MIDI report descriptor for report id is wrong. */ -static void pk_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *pk_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { - if (rsize == 178 && + if (*rsize == 178 && rdesc[111] == 0x06 && rdesc[112] == 0x00 && rdesc[113] == 0xff) { dev_info(&hdev->dev, "fixing up pc-midi keyboard report " @@ -751,6 +751,7 @@ static void pk_report_fixup(struct hid_device *hdev, __u8 *rdesc, rdesc[144] = 0x18; /* report 4: was 0x10 report count */ } + return rdesc; } static int pk_input_mapping(struct hid_device *hdev, struct hid_input *hi, diff --git a/drivers/hid/hid-roccat-pyra.c b/drivers/hid/hid-roccat-pyra.c new file mode 100644 index 00000000000..9bf23047892 --- /dev/null +++ b/drivers/hid/hid-roccat-pyra.c @@ -0,0 +1,968 @@ +/* + * Roccat Pyra driver for Linux + * + * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +/* + * Roccat Pyra is a mobile gamer mouse which comes in wired and wireless + * variant. Wireless variant is not tested. + * Userland tools can be found at http://sourceforge.net/projects/roccat + */ + +#include <linux/device.h> +#include <linux/input.h> +#include <linux/hid.h> +#include <linux/usb.h> +#include <linux/module.h> +#include <linux/slab.h> +#include "hid-ids.h" +#include "hid-roccat.h" +#include "hid-roccat-pyra.h" + +static void profile_activated(struct pyra_device *pyra, + unsigned int new_profile) +{ + pyra->actual_profile = new_profile; + pyra->actual_cpi = pyra->profile_settings[pyra->actual_profile].y_cpi; +} + +static int pyra_send_control(struct usb_device *usb_dev, int value, + enum pyra_control_requests request) +{ + int len; + struct pyra_control control; + + if ((request == PYRA_CONTROL_REQUEST_PROFILE_SETTINGS || + request == PYRA_CONTROL_REQUEST_PROFILE_BUTTONS) && + (value < 0 || value > 4)) + return -EINVAL; + + control.command = PYRA_COMMAND_CONTROL; + control.value = value; + control.request = request; + + len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_CONFIGURATION, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, + PYRA_USB_COMMAND_CONTROL, 0, (char *)&control, + sizeof(struct pyra_control), + USB_CTRL_SET_TIMEOUT); + + if (len != sizeof(struct pyra_control)) + return len; + + return 0; +} + +static int pyra_receive_control_status(struct usb_device *usb_dev) +{ + int len; + struct pyra_control control; + + do { + msleep(10); + + len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | + USB_DIR_IN, + PYRA_USB_COMMAND_CONTROL, 0, (char *)&control, + sizeof(struct pyra_control), + USB_CTRL_SET_TIMEOUT); + + /* requested too early, try again */ + } while (len == -EPROTO); + + if (len == sizeof(struct pyra_control) && + control.command == PYRA_COMMAND_CONTROL && + control.request == PYRA_CONTROL_REQUEST_STATUS && + control.value == 1) + return 0; + else { + dev_err(&usb_dev->dev, "receive control status: " + "unknown response 0x%x 0x%x\n", + control.request, control.value); + return -EINVAL; + } +} + +static int pyra_get_profile_settings(struct usb_device *usb_dev, + struct pyra_profile_settings *buf, int number) +{ + int retval; + + retval = pyra_send_control(usb_dev, number, + PYRA_CONTROL_REQUEST_PROFILE_SETTINGS); + + if (retval) + return retval; + + retval = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + PYRA_USB_COMMAND_PROFILE_SETTINGS, 0, (char *)buf, + sizeof(struct pyra_profile_settings), + USB_CTRL_SET_TIMEOUT); + + if (retval != sizeof(struct pyra_profile_settings)) + return retval; + + return 0; +} + +static int pyra_get_profile_buttons(struct usb_device *usb_dev, + struct pyra_profile_buttons *buf, int number) +{ + int retval; + + retval = pyra_send_control(usb_dev, number, + PYRA_CONTROL_REQUEST_PROFILE_BUTTONS); + + if (retval) + return retval; + + retval = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + PYRA_USB_COMMAND_PROFILE_BUTTONS, 0, (char *)buf, + sizeof(struct pyra_profile_buttons), + USB_CTRL_SET_TIMEOUT); + + if (retval != sizeof(struct pyra_profile_buttons)) + return retval; + + return 0; +} + +static int pyra_get_settings(struct usb_device *usb_dev, + struct pyra_settings *buf) +{ + int len; + len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + PYRA_USB_COMMAND_SETTINGS, 0, buf, + sizeof(struct pyra_settings), USB_CTRL_SET_TIMEOUT); + if (len != sizeof(struct pyra_settings)) + return -EIO; + return 0; +} + +static int pyra_get_info(struct usb_device *usb_dev, struct pyra_info *buf) +{ + int len; + len = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_CLEAR_FEATURE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + PYRA_USB_COMMAND_INFO, 0, buf, + sizeof(struct pyra_info), USB_CTRL_SET_TIMEOUT); + if (len != sizeof(struct pyra_info)) + return -EIO; + return 0; +} + +static int pyra_set_profile_settings(struct usb_device *usb_dev, + struct pyra_profile_settings const *settings) +{ + int len; + len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_CONFIGURATION, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, + PYRA_USB_COMMAND_PROFILE_SETTINGS, 0, (char *)settings, + sizeof(struct pyra_profile_settings), + USB_CTRL_SET_TIMEOUT); + if (len != sizeof(struct pyra_profile_settings)) + return -EIO; + if (pyra_receive_control_status(usb_dev)) + return -EIO; + return 0; +} + +static int pyra_set_profile_buttons(struct usb_device *usb_dev, + struct pyra_profile_buttons const *buttons) +{ + int len; + len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_CONFIGURATION, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, + PYRA_USB_COMMAND_PROFILE_BUTTONS, 0, (char *)buttons, + sizeof(struct pyra_profile_buttons), + USB_CTRL_SET_TIMEOUT); + if (len != sizeof(struct pyra_profile_buttons)) + return -EIO; + if (pyra_receive_control_status(usb_dev)) + return -EIO; + return 0; +} + +static int pyra_set_settings(struct usb_device *usb_dev, + struct pyra_settings const *settings) +{ + int len; + len = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_CONFIGURATION, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, + PYRA_USB_COMMAND_SETTINGS, 0, (char *)settings, + sizeof(struct pyra_settings), USB_CTRL_SET_TIMEOUT); + if (len != sizeof(struct pyra_settings)) + return -EIO; + if (pyra_receive_control_status(usb_dev)) + return -EIO; + return 0; +} + +static ssize_t pyra_sysfs_read_profilex_settings(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count, int number) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev)); + + if (off >= sizeof(struct pyra_profile_settings)) + return 0; + + if (off + count > sizeof(struct pyra_profile_settings)) + count = sizeof(struct pyra_profile_settings) - off; + + mutex_lock(&pyra->pyra_lock); + memcpy(buf, ((char const *)&pyra->profile_settings[number]) + off, + count); + mutex_unlock(&pyra->pyra_lock); + + return count; +} + +static ssize_t pyra_sysfs_read_profile1_settings(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + return pyra_sysfs_read_profilex_settings(fp, kobj, + attr, buf, off, count, 0); +} + +static ssize_t pyra_sysfs_read_profile2_settings(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + return pyra_sysfs_read_profilex_settings(fp, kobj, + attr, buf, off, count, 1); +} + +static ssize_t pyra_sysfs_read_profile3_settings(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + return pyra_sysfs_read_profilex_settings(fp, kobj, + attr, buf, off, count, 2); +} + +static ssize_t pyra_sysfs_read_profile4_settings(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + return pyra_sysfs_read_profilex_settings(fp, kobj, + attr, buf, off, count, 3); +} + +static ssize_t pyra_sysfs_read_profile5_settings(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + return pyra_sysfs_read_profilex_settings(fp, kobj, + attr, buf, off, count, 4); +} + +static ssize_t pyra_sysfs_read_profilex_buttons(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count, int number) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev)); + + if (off >= sizeof(struct pyra_profile_buttons)) + return 0; + + if (off + count > sizeof(struct pyra_profile_buttons)) + count = sizeof(struct pyra_profile_buttons) - off; + + mutex_lock(&pyra->pyra_lock); + memcpy(buf, ((char const *)&pyra->profile_buttons[number]) + off, + count); + mutex_unlock(&pyra->pyra_lock); + + return count; +} + +static ssize_t pyra_sysfs_read_profile1_buttons(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + return pyra_sysfs_read_profilex_buttons(fp, kobj, + attr, buf, off, count, 0); +} + +static ssize_t pyra_sysfs_read_profile2_buttons(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + return pyra_sysfs_read_profilex_buttons(fp, kobj, + attr, buf, off, count, 1); +} + +static ssize_t pyra_sysfs_read_profile3_buttons(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + return pyra_sysfs_read_profilex_buttons(fp, kobj, + attr, buf, off, count, 2); +} + +static ssize_t pyra_sysfs_read_profile4_buttons(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + return pyra_sysfs_read_profilex_buttons(fp, kobj, + attr, buf, off, count, 3); +} + +static ssize_t pyra_sysfs_read_profile5_buttons(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + return pyra_sysfs_read_profilex_buttons(fp, kobj, + attr, buf, off, count, 4); +} + +static ssize_t pyra_sysfs_write_profile_settings(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev)); + struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev)); + int retval = 0; + int difference; + int profile_number; + struct pyra_profile_settings *profile_settings; + + if (off != 0 || count != sizeof(struct pyra_profile_settings)) + return -EINVAL; + + profile_number = ((struct pyra_profile_settings const *)buf)->number; + profile_settings = &pyra->profile_settings[profile_number]; + + mutex_lock(&pyra->pyra_lock); + difference = memcmp(buf, profile_settings, + sizeof(struct pyra_profile_settings)); + if (difference) { + retval = pyra_set_profile_settings(usb_dev, + (struct pyra_profile_settings const *)buf); + if (!retval) + memcpy(profile_settings, buf, + sizeof(struct pyra_profile_settings)); + } + mutex_unlock(&pyra->pyra_lock); + + if (retval) + return retval; + + return sizeof(struct pyra_profile_settings); +} + +static ssize_t pyra_sysfs_write_profile_buttons(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev)); + struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev)); + int retval = 0; + int difference; + int profile_number; + struct pyra_profile_buttons *profile_buttons; + + if (off != 0 || count != sizeof(struct pyra_profile_buttons)) + return -EINVAL; + + profile_number = ((struct pyra_profile_buttons const *)buf)->number; + profile_buttons = &pyra->profile_buttons[profile_number]; + + mutex_lock(&pyra->pyra_lock); + difference = memcmp(buf, profile_buttons, + sizeof(struct pyra_profile_buttons)); + if (difference) { + retval = pyra_set_profile_buttons(usb_dev, + (struct pyra_profile_buttons const *)buf); + if (!retval) + memcpy(profile_buttons, buf, + sizeof(struct pyra_profile_buttons)); + } + mutex_unlock(&pyra->pyra_lock); + + if (retval) + return retval; + + return sizeof(struct pyra_profile_buttons); +} + +static ssize_t pyra_sysfs_read_settings(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev)); + + if (off >= sizeof(struct pyra_settings)) + return 0; + + if (off + count > sizeof(struct pyra_settings)) + count = sizeof(struct pyra_settings) - off; + + mutex_lock(&pyra->pyra_lock); + memcpy(buf, ((char const *)&pyra->settings) + off, count); + mutex_unlock(&pyra->pyra_lock); + + return count; +} + +static ssize_t pyra_sysfs_write_settings(struct file *fp, + struct kobject *kobj, struct bin_attribute *attr, char *buf, + loff_t off, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev)); + struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev)); + int retval = 0; + int difference; + + if (off != 0 || count != sizeof(struct pyra_settings)) + return -EINVAL; + + mutex_lock(&pyra->pyra_lock); + difference = memcmp(buf, &pyra->settings, sizeof(struct pyra_settings)); + if (difference) { + retval = pyra_set_settings(usb_dev, + (struct pyra_settings const *)buf); + if (!retval) + memcpy(&pyra->settings, buf, + sizeof(struct pyra_settings)); + } + mutex_unlock(&pyra->pyra_lock); + + if (retval) + return retval; + + profile_activated(pyra, pyra->settings.startup_profile); + + return sizeof(struct pyra_settings); +} + + +static ssize_t pyra_sysfs_show_actual_cpi(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev)); + return snprintf(buf, PAGE_SIZE, "%d\n", pyra->actual_cpi); +} + +static ssize_t pyra_sysfs_show_actual_profile(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev)); + return snprintf(buf, PAGE_SIZE, "%d\n", pyra->actual_profile); +} + +static ssize_t pyra_sysfs_show_firmware_version(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev)); + return snprintf(buf, PAGE_SIZE, "%d\n", pyra->firmware_version); +} + +static ssize_t pyra_sysfs_show_startup_profile(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pyra_device *pyra = hid_get_drvdata(dev_get_drvdata(dev)); + return snprintf(buf, PAGE_SIZE, "%d\n", pyra->settings.startup_profile); +} + +static DEVICE_ATTR(actual_cpi, 0440, pyra_sysfs_show_actual_cpi, NULL); + +static DEVICE_ATTR(actual_profile, 0440, pyra_sysfs_show_actual_profile, NULL); + +static DEVICE_ATTR(firmware_version, 0440, + pyra_sysfs_show_firmware_version, NULL); + +static DEVICE_ATTR(startup_profile, 0440, + pyra_sysfs_show_startup_profile, NULL); + +static struct attribute *pyra_attributes[] = { + &dev_attr_actual_cpi.attr, + &dev_attr_actual_profile.attr, + &dev_attr_firmware_version.attr, + &dev_attr_startup_profile.attr, + NULL +}; + +static struct attribute_group pyra_attribute_group = { + .attrs = pyra_attributes +}; + +static struct bin_attribute pyra_profile_settings_attr = { + .attr = { .name = "profile_settings", .mode = 0220 }, + .size = sizeof(struct pyra_profile_settings), + .write = pyra_sysfs_write_profile_settings +}; + +static struct bin_attribute pyra_profile1_settings_attr = { + .attr = { .name = "profile1_settings", .mode = 0440 }, + .size = sizeof(struct pyra_profile_settings), + .read = pyra_sysfs_read_profile1_settings +}; + +static struct bin_attribute pyra_profile2_settings_attr = { + .attr = { .name = "profile2_settings", .mode = 0440 }, + .size = sizeof(struct pyra_profile_settings), + .read = pyra_sysfs_read_profile2_settings +}; + +static struct bin_attribute pyra_profile3_settings_attr = { + .attr = { .name = "profile3_settings", .mode = 0440 }, + .size = sizeof(struct pyra_profile_settings), + .read = pyra_sysfs_read_profile3_settings +}; + +static struct bin_attribute pyra_profile4_settings_attr = { + .attr = { .name = "profile4_settings", .mode = 0440 }, + .size = sizeof(struct pyra_profile_settings), + .read = pyra_sysfs_read_profile4_settings +}; + +static struct bin_attribute pyra_profile5_settings_attr = { + .attr = { .name = "profile5_settings", .mode = 0440 }, + .size = sizeof(struct pyra_profile_settings), + .read = pyra_sysfs_read_profile5_settings +}; + +static struct bin_attribute pyra_profile_buttons_attr = { + .attr = { .name = "profile_buttons", .mode = 0220 }, + .size = sizeof(struct pyra_profile_buttons), + .write = pyra_sysfs_write_profile_buttons +}; + +static struct bin_attribute pyra_profile1_buttons_attr = { + .attr = { .name = "profile1_buttons", .mode = 0440 }, + .size = sizeof(struct pyra_profile_buttons), + .read = pyra_sysfs_read_profile1_buttons +}; + +static struct bin_attribute pyra_profile2_buttons_attr = { + .attr = { .name = "profile2_buttons", .mode = 0440 }, + .size = sizeof(struct pyra_profile_buttons), + .read = pyra_sysfs_read_profile2_buttons +}; + +static struct bin_attribute pyra_profile3_buttons_attr = { + .attr = { .name = "profile3_buttons", .mode = 0440 }, + .size = sizeof(struct pyra_profile_buttons), + .read = pyra_sysfs_read_profile3_buttons +}; + +static struct bin_attribute pyra_profile4_buttons_attr = { + .attr = { .name = "profile4_buttons", .mode = 0440 }, + .size = sizeof(struct pyra_profile_buttons), + .read = pyra_sysfs_read_profile4_buttons +}; + +static struct bin_attribute pyra_profile5_buttons_attr = { + .attr = { .name = "profile5_buttons", .mode = 0440 }, + .size = sizeof(struct pyra_profile_buttons), + .read = pyra_sysfs_read_profile5_buttons +}; + +static struct bin_attribute pyra_settings_attr = { + .attr = { .name = "settings", .mode = 0660 }, + .size = sizeof(struct pyra_settings), + .read = pyra_sysfs_read_settings, + .write = pyra_sysfs_write_settings +}; + +static int pyra_create_sysfs_attributes(struct usb_interface *intf) +{ + int retval; + + retval = sysfs_create_group(&intf->dev.kobj, &pyra_attribute_group); + if (retval) + goto exit_1; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile_settings_attr); + if (retval) + goto exit_2; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile1_settings_attr); + if (retval) + goto exit_3; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile2_settings_attr); + if (retval) + goto exit_4; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile3_settings_attr); + if (retval) + goto exit_5; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile4_settings_attr); + if (retval) + goto exit_6; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile5_settings_attr); + if (retval) + goto exit_7; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile_buttons_attr); + if (retval) + goto exit_8; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile1_buttons_attr); + if (retval) + goto exit_9; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile2_buttons_attr); + if (retval) + goto exit_10; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile3_buttons_attr); + if (retval) + goto exit_11; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile4_buttons_attr); + if (retval) + goto exit_12; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_profile5_buttons_attr); + if (retval) + goto exit_13; + + retval = sysfs_create_bin_file(&intf->dev.kobj, + &pyra_settings_attr); + if (retval) + goto exit_14; + + return 0; + +exit_14: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile5_buttons_attr); +exit_13: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile4_buttons_attr); +exit_12: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile3_buttons_attr); +exit_11: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile2_buttons_attr); +exit_10: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile1_buttons_attr); +exit_9: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile_buttons_attr); +exit_8: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile5_settings_attr); +exit_7: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile4_settings_attr); +exit_6: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile3_settings_attr); +exit_5: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile2_settings_attr); +exit_4: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile1_settings_attr); +exit_3: + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile_settings_attr); +exit_2: + sysfs_remove_group(&intf->dev.kobj, &pyra_attribute_group); +exit_1: + return retval; +} + +static void pyra_remove_sysfs_attributes(struct usb_interface *intf) +{ + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_settings_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile5_buttons_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile4_buttons_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile3_buttons_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile2_buttons_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile1_buttons_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile_buttons_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile5_settings_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile4_settings_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile3_settings_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile2_settings_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile1_settings_attr); + sysfs_remove_bin_file(&intf->dev.kobj, &pyra_profile_settings_attr); + sysfs_remove_group(&intf->dev.kobj, &pyra_attribute_group); +} + +static int pyra_init_pyra_device_struct(struct usb_device *usb_dev, + struct pyra_device *pyra) +{ + struct pyra_info *info; + int retval, i; + + mutex_init(&pyra->pyra_lock); + + info = kmalloc(sizeof(struct pyra_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + retval = pyra_get_info(usb_dev, info); + if (retval) { + kfree(info); + return retval; + } + pyra->firmware_version = info->firmware_version; + kfree(info); + + retval = pyra_get_settings(usb_dev, &pyra->settings); + if (retval) + return retval; + + for (i = 0; i < 5; ++i) { + retval = pyra_get_profile_settings(usb_dev, + &pyra->profile_settings[i], i); + if (retval) + return retval; + + retval = pyra_get_profile_buttons(usb_dev, + &pyra->profile_buttons[i], i); + if (retval) + return retval; + } + + profile_activated(pyra, pyra->settings.startup_profile); + + return 0; +} + +static int pyra_init_specials(struct hid_device *hdev) +{ + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + struct usb_device *usb_dev = interface_to_usbdev(intf); + struct pyra_device *pyra; + int retval; + + if (intf->cur_altsetting->desc.bInterfaceProtocol + == USB_INTERFACE_PROTOCOL_MOUSE) { + + pyra = kzalloc(sizeof(*pyra), GFP_KERNEL); + if (!pyra) { + dev_err(&hdev->dev, "can't alloc device descriptor\n"); + return -ENOMEM; + } + hid_set_drvdata(hdev, pyra); + + retval = pyra_init_pyra_device_struct(usb_dev, pyra); + if (retval) { + dev_err(&hdev->dev, + "couldn't init struct pyra_device\n"); + goto exit_free; + } + + retval = roccat_connect(hdev); + if (retval < 0) { + dev_err(&hdev->dev, "couldn't init char dev\n"); + } else { + pyra->chrdev_minor = retval; + pyra->roccat_claimed = 1; + } + + retval = pyra_create_sysfs_attributes(intf); + if (retval) { + dev_err(&hdev->dev, "cannot create sysfs files\n"); + goto exit_free; + } + } else { + hid_set_drvdata(hdev, NULL); + } + + return 0; +exit_free: + kfree(pyra); + return retval; +} + +static void pyra_remove_specials(struct hid_device *hdev) +{ + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + struct pyra_device *pyra; + + if (intf->cur_altsetting->desc.bInterfaceProtocol + == USB_INTERFACE_PROTOCOL_MOUSE) { + pyra_remove_sysfs_attributes(intf); + pyra = hid_get_drvdata(hdev); + if (pyra->roccat_claimed) + roccat_disconnect(pyra->chrdev_minor); + kfree(hid_get_drvdata(hdev)); + } +} + +static int pyra_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int retval; + + retval = hid_parse(hdev); + if (retval) { + dev_err(&hdev->dev, "parse failed\n"); + goto exit; + } + + retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (retval) { + dev_err(&hdev->dev, "hw start failed\n"); + goto exit; + } + + retval = pyra_init_specials(hdev); + if (retval) { + dev_err(&hdev->dev, "couldn't install mouse\n"); + goto exit_stop; + } + return 0; + +exit_stop: + hid_hw_stop(hdev); +exit: + return retval; +} + +static void pyra_remove(struct hid_device *hdev) +{ + pyra_remove_specials(hdev); + hid_hw_stop(hdev); +} + +static void pyra_keep_values_up_to_date(struct pyra_device *pyra, + u8 const *data) +{ + struct pyra_mouse_event_button const *button_event; + + switch (data[0]) { + case PYRA_MOUSE_REPORT_NUMBER_BUTTON: + button_event = (struct pyra_mouse_event_button const *)data; + switch (button_event->type) { + case PYRA_MOUSE_EVENT_BUTTON_TYPE_PROFILE_2: + profile_activated(pyra, button_event->data1 - 1); + break; + case PYRA_MOUSE_EVENT_BUTTON_TYPE_CPI: + pyra->actual_cpi = button_event->data1; + break; + } + break; + } +} + +static void pyra_report_to_chrdev(struct pyra_device const *pyra, + u8 const *data) +{ + struct pyra_roccat_report roccat_report; + struct pyra_mouse_event_button const *button_event; + + if (data[0] != PYRA_MOUSE_REPORT_NUMBER_BUTTON) + return; + + button_event = (struct pyra_mouse_event_button const *)data; + + switch (button_event->type) { + case PYRA_MOUSE_EVENT_BUTTON_TYPE_PROFILE_2: + case PYRA_MOUSE_EVENT_BUTTON_TYPE_CPI: + roccat_report.type = button_event->type; + roccat_report.value = button_event->data1; + roccat_report.key = 0; + roccat_report_event(pyra->chrdev_minor, + (uint8_t const *)&roccat_report, + sizeof(struct pyra_roccat_report)); + break; + case PYRA_MOUSE_EVENT_BUTTON_TYPE_MACRO: + case PYRA_MOUSE_EVENT_BUTTON_TYPE_SHORTCUT: + case PYRA_MOUSE_EVENT_BUTTON_TYPE_QUICKLAUNCH: + if (button_event->data2 == PYRA_MOUSE_EVENT_BUTTON_PRESS) { + roccat_report.type = button_event->type; + roccat_report.key = button_event->data1; + /* + * pyra reports profile numbers with range 1-5. + * Keeping this behaviour. + */ + roccat_report.value = pyra->actual_profile + 1; + roccat_report_event(pyra->chrdev_minor, + (uint8_t const *)&roccat_report, + sizeof(struct pyra_roccat_report)); + } + break; + } +} + +static int pyra_raw_event(struct hid_device *hdev, struct hid_report *report, + u8 *data, int size) +{ + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + struct pyra_device *pyra = hid_get_drvdata(hdev); + + if (intf->cur_altsetting->desc.bInterfaceProtocol + != USB_INTERFACE_PROTOCOL_MOUSE) + return 0; + + pyra_keep_values_up_to_date(pyra, data); + + if (pyra->roccat_claimed) + pyra_report_to_chrdev(pyra, data); + + return 0; +} + +static const struct hid_device_id pyra_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, + USB_DEVICE_ID_ROCCAT_PYRA_WIRED) }, + /* TODO add USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS after testing */ + { } +}; + +MODULE_DEVICE_TABLE(hid, pyra_devices); + +static struct hid_driver pyra_driver = { + .name = "pyra", + .id_table = pyra_devices, + .probe = pyra_probe, + .remove = pyra_remove, + .raw_event = pyra_raw_event +}; + +static int __init pyra_init(void) +{ + return hid_register_driver(&pyra_driver); +} + +static void __exit pyra_exit(void) +{ + hid_unregister_driver(&pyra_driver); +} + +module_init(pyra_init); +module_exit(pyra_exit); + +MODULE_AUTHOR("Stefan Achatz"); +MODULE_DESCRIPTION("USB Roccat Pyra driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hid/hid-roccat-pyra.h b/drivers/hid/hid-roccat-pyra.h new file mode 100644 index 00000000000..22f80a8f26f --- /dev/null +++ b/drivers/hid/hid-roccat-pyra.h @@ -0,0 +1,186 @@ +#ifndef __HID_ROCCAT_PYRA_H +#define __HID_ROCCAT_PYRA_H + +/* + * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net> + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/types.h> + +#pragma pack(push) +#pragma pack(1) + +struct pyra_b { + uint8_t command; /* PYRA_COMMAND_B */ + uint8_t size; /* always 3 */ + uint8_t unknown; /* 1 */ +}; + +struct pyra_control { + uint8_t command; /* PYRA_COMMAND_CONTROL */ + /* + * value is profile number for request_settings and request_buttons + * 1 if status ok for request_status + */ + uint8_t value; /* Range 0-4 */ + uint8_t request; +}; + +enum pyra_control_requests { + PYRA_CONTROL_REQUEST_STATUS = 0x00, + PYRA_CONTROL_REQUEST_PROFILE_SETTINGS = 0x10, + PYRA_CONTROL_REQUEST_PROFILE_BUTTONS = 0x20 +}; + +struct pyra_settings { + uint8_t command; /* PYRA_COMMAND_SETTINGS */ + uint8_t size; /* always 3 */ + uint8_t startup_profile; /* Range 0-4! */ +}; + +struct pyra_profile_settings { + uint8_t command; /* PYRA_COMMAND_PROFILE_SETTINGS */ + uint8_t size; /* always 0xd */ + uint8_t number; /* Range 0-4 */ + uint8_t xysync; + uint8_t x_sensitivity; /* 0x1-0xa */ + uint8_t y_sensitivity; + uint8_t x_cpi; /* unused */ + uint8_t y_cpi; /* this value is for x and y */ + uint8_t lightswitch; /* 0 = off, 1 = on */ + uint8_t light_effect; + uint8_t handedness; + uint16_t checksum; /* byte sum */ +}; + +struct pyra_profile_buttons { + uint8_t command; /* PYRA_COMMAND_PROFILE_BUTTONS */ + uint8_t size; /* always 0x13 */ + uint8_t number; /* Range 0-4 */ + uint8_t buttons[14]; + uint16_t checksum; /* byte sum */ +}; + +struct pyra_info { + uint8_t command; /* PYRA_COMMAND_INFO */ + uint8_t size; /* always 6 */ + uint8_t firmware_version; + uint8_t unknown1; /* always 0 */ + uint8_t unknown2; /* always 1 */ + uint8_t unknown3; /* always 0 */ +}; + +enum pyra_commands { + PYRA_COMMAND_CONTROL = 0x4, + PYRA_COMMAND_SETTINGS = 0x5, + PYRA_COMMAND_PROFILE_SETTINGS = 0x6, + PYRA_COMMAND_PROFILE_BUTTONS = 0x7, + PYRA_COMMAND_INFO = 0x9, + PYRA_COMMAND_B = 0xb +}; + +enum pyra_usb_commands { + PYRA_USB_COMMAND_CONTROL = 0x304, + PYRA_USB_COMMAND_SETTINGS = 0x305, + PYRA_USB_COMMAND_PROFILE_SETTINGS = 0x306, + PYRA_USB_COMMAND_PROFILE_BUTTONS = 0x307, + PYRA_USB_COMMAND_INFO = 0x309, + PYRA_USB_COMMAND_B = 0x30b /* writes 3 bytes */ +}; + +enum pyra_mouse_report_numbers { + PYRA_MOUSE_REPORT_NUMBER_HID = 1, + PYRA_MOUSE_REPORT_NUMBER_AUDIO = 2, + PYRA_MOUSE_REPORT_NUMBER_BUTTON = 3, +}; + +struct pyra_mouse_event_button { + uint8_t report_number; /* always 3 */ + uint8_t unknown; /* always 0 */ + uint8_t type; + uint8_t data1; + uint8_t data2; +}; + +struct pyra_mouse_event_audio { + uint8_t report_number; /* always 2 */ + uint8_t type; + uint8_t unused; /* always 0 */ +}; + +/* hid audio controls */ +enum pyra_mouse_event_audio_types { + PYRA_MOUSE_EVENT_AUDIO_TYPE_MUTE = 0xe2, + PYRA_MOUSE_EVENT_AUDIO_TYPE_VOLUME_UP = 0xe9, + PYRA_MOUSE_EVENT_AUDIO_TYPE_VOLUME_DOWN = 0xea, +}; + +enum pyra_mouse_event_button_types { + /* + * Mouse sends tilt events on report_number 1 and 3 + * Tilt events are sent repeatedly with 0.94s between first and second + * event and 0.22s on subsequent + */ + PYRA_MOUSE_EVENT_BUTTON_TYPE_TILT = 0x10, + + /* + * These are sent sequentially + * data1 contains new profile number in range 1-5 + */ + PYRA_MOUSE_EVENT_BUTTON_TYPE_PROFILE_1 = 0x20, + PYRA_MOUSE_EVENT_BUTTON_TYPE_PROFILE_2 = 0x30, + + /* + * data1 = button_number (rmp index) + * data2 = pressed/released + */ + PYRA_MOUSE_EVENT_BUTTON_TYPE_MACRO = 0x40, + PYRA_MOUSE_EVENT_BUTTON_TYPE_SHORTCUT = 0x50, + + /* + * data1 = button_number (rmp index) + */ + PYRA_MOUSE_EVENT_BUTTON_TYPE_QUICKLAUNCH = 0x60, + + /* data1 = new cpi */ + PYRA_MOUSE_EVENT_BUTTON_TYPE_CPI = 0xb0, + + /* data1 and data2 = new sensitivity */ + PYRA_MOUSE_EVENT_BUTTON_TYPE_SENSITIVITY = 0xc0, + + PYRA_MOUSE_EVENT_BUTTON_TYPE_MULTIMEDIA = 0xf0, +}; + +enum { + PYRA_MOUSE_EVENT_BUTTON_PRESS = 0, + PYRA_MOUSE_EVENT_BUTTON_RELEASE = 1, +}; + +struct pyra_roccat_report { + uint8_t type; + uint8_t value; + uint8_t key; +}; + +#pragma pack(pop) + +struct pyra_device { + int actual_profile; + int actual_cpi; + int firmware_version; + int roccat_claimed; + int chrdev_minor; + struct mutex pyra_lock; + struct pyra_settings settings; + struct pyra_profile_settings profile_settings[5]; + struct pyra_profile_buttons profile_buttons[5]; +}; + +#endif diff --git a/drivers/hid/hid-samsung.c b/drivers/hid/hid-samsung.c index bda0fd60c98..35894444e00 100644 --- a/drivers/hid/hid-samsung.c +++ b/drivers/hid/hid-samsung.c @@ -61,10 +61,10 @@ static inline void samsung_irda_dev_trace(struct hid_device *hdev, "descriptor\n", rsize); } -static void samsung_irda_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *samsung_irda_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { - if (rsize == 184 && rdesc[175] == 0x25 && rdesc[176] == 0x40 && + if (*rsize == 184 && rdesc[175] == 0x25 && rdesc[176] == 0x40 && rdesc[177] == 0x75 && rdesc[178] == 0x30 && rdesc[179] == 0x95 && rdesc[180] == 0x01 && rdesc[182] == 0x40) { @@ -74,24 +74,25 @@ static void samsung_irda_report_fixup(struct hid_device *hdev, __u8 *rdesc, rdesc[180] = 0x06; rdesc[182] = 0x42; } else - if (rsize == 203 && rdesc[192] == 0x15 && rdesc[193] == 0x0 && + if (*rsize == 203 && rdesc[192] == 0x15 && rdesc[193] == 0x0 && rdesc[194] == 0x25 && rdesc[195] == 0x12) { samsung_irda_dev_trace(hdev, 203); rdesc[193] = 0x1; rdesc[195] = 0xf; } else - if (rsize == 135 && rdesc[124] == 0x15 && rdesc[125] == 0x0 && + if (*rsize == 135 && rdesc[124] == 0x15 && rdesc[125] == 0x0 && rdesc[126] == 0x25 && rdesc[127] == 0x11) { samsung_irda_dev_trace(hdev, 135); rdesc[125] = 0x1; rdesc[127] = 0xe; } else - if (rsize == 171 && rdesc[160] == 0x15 && rdesc[161] == 0x0 && + if (*rsize == 171 && rdesc[160] == 0x15 && rdesc[161] == 0x0 && rdesc[162] == 0x25 && rdesc[163] == 0x01) { samsung_irda_dev_trace(hdev, 171); rdesc[161] = 0x1; rdesc[163] = 0x3; } + return rdesc; } #define samsung_kbd_mouse_map_key_clear(c) \ @@ -130,11 +131,12 @@ static int samsung_kbd_mouse_input_mapping(struct hid_device *hdev, return 1; } -static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { if (USB_DEVICE_ID_SAMSUNG_IR_REMOTE == hdev->product) - samsung_irda_report_fixup(hdev, rdesc, rsize); + rdesc = samsung_irda_report_fixup(hdev, rdesc, rsize); + return rdesc; } static int samsung_input_mapping(struct hid_device *hdev, struct hid_input *hi, diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 402d5574b57..677bb3da10e 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -24,24 +24,46 @@ #include "hid-ids.h" -#define VAIO_RDESC_CONSTANT 0x0001 +#define VAIO_RDESC_CONSTANT (1 << 0) +#define SIXAXIS_CONTROLLER_USB (1 << 1) +#define SIXAXIS_CONTROLLER_BT (1 << 2) struct sony_sc { unsigned long quirks; }; /* Sony Vaio VGX has wrongly mouse pointer declared as constant */ -static void sony_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { struct sony_sc *sc = hid_get_drvdata(hdev); if ((sc->quirks & VAIO_RDESC_CONSTANT) && - rsize >= 56 && rdesc[54] == 0x81 && rdesc[55] == 0x07) { + *rsize >= 56 && rdesc[54] == 0x81 && rdesc[55] == 0x07) { dev_info(&hdev->dev, "Fixing up Sony Vaio VGX report " "descriptor\n"); rdesc[55] = 0x06; } + return rdesc; +} + +static int sixaxis_usb_output_raw_report(struct hid_device *hid, __u8 *buf, + size_t count, unsigned char report_type) +{ + struct usb_interface *intf = to_usb_interface(hid->dev.parent); + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_host_interface *interface = intf->cur_altsetting; + int report_id = buf[0]; + int ret; + + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + HID_REQ_SET_REPORT, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + ((report_type + 1) << 8) | report_id, + interface->desc.bInterfaceNumber, buf, count, + USB_CTRL_SET_TIMEOUT); + + return ret; } /* @@ -49,7 +71,7 @@ static void sony_report_fixup(struct hid_device *hdev, __u8 *rdesc, * to "operational". Without this, the ps3 controller will not report any * events. */ -static int sony_set_operational_usb(struct hid_device *hdev) +static int sixaxis_set_operational_usb(struct hid_device *hdev) { struct usb_interface *intf = to_usb_interface(hdev->dev.parent); struct usb_device *dev = interface_to_usbdev(intf); @@ -74,7 +96,7 @@ static int sony_set_operational_usb(struct hid_device *hdev) return ret; } -static int sony_set_operational_bt(struct hid_device *hdev) +static int sixaxis_set_operational_bt(struct hid_device *hdev) { unsigned char buf[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 }; return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT); @@ -108,16 +130,14 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) goto err_free; } - switch (hdev->bus) { - case BUS_USB: - ret = sony_set_operational_usb(hdev); - break; - case BUS_BLUETOOTH: - ret = sony_set_operational_bt(hdev); - break; - default: - ret = 0; + if (sc->quirks & SIXAXIS_CONTROLLER_USB) { + hdev->hid_output_raw_report = sixaxis_usb_output_raw_report; + ret = sixaxis_set_operational_usb(hdev); } + else if (sc->quirks & SIXAXIS_CONTROLLER_BT) + ret = sixaxis_set_operational_bt(hdev); + else + ret = 0; if (ret < 0) goto err_stop; @@ -137,8 +157,10 @@ static void sony_remove(struct hid_device *hdev) } static const struct hid_device_id sony_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER), + .driver_data = SIXAXIS_CONTROLLER_USB }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER), + .driver_data = SIXAXIS_CONTROLLER_BT }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE), .driver_data = VAIO_RDESC_CONSTANT }, { } diff --git a/drivers/hid/hid-stantum.c b/drivers/hid/hid-stantum.c index 90df886c5e0..3171be28c3d 100644 --- a/drivers/hid/hid-stantum.c +++ b/drivers/hid/hid-stantum.c @@ -249,6 +249,8 @@ static void stantum_remove(struct hid_device *hdev) static const struct hid_device_id stantum_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) }, + { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM, USB_DEVICE_ID_MTP_STM) }, + { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX, USB_DEVICE_ID_MTP_SITRONIX) }, { } }; MODULE_DEVICE_TABLE(hid, stantum_devices); diff --git a/drivers/hid/hid-sunplus.c b/drivers/hid/hid-sunplus.c index 438107d9f1b..164ed568f6c 100644 --- a/drivers/hid/hid-sunplus.c +++ b/drivers/hid/hid-sunplus.c @@ -22,16 +22,17 @@ #include "hid-ids.h" -static void sp_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *sp_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { - if (rsize >= 107 && rdesc[104] == 0x26 && rdesc[105] == 0x80 && + if (*rsize >= 107 && rdesc[104] == 0x26 && rdesc[105] == 0x80 && rdesc[106] == 0x03) { dev_info(&hdev->dev, "fixing up Sunplus Wireless Desktop " "report descriptor\n"); rdesc[105] = rdesc[110] = 0x03; rdesc[106] = rdesc[111] = 0x21; } + return rdesc; } #define sp_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \ diff --git a/drivers/hid/hid-uclogic.c b/drivers/hid/hid-uclogic.c new file mode 100644 index 00000000000..05fdc85a76e --- /dev/null +++ b/drivers/hid/hid-uclogic.c @@ -0,0 +1,623 @@ +/* + * HID driver for UC-Logic devices not fully compliant with HID standard + * + * Copyright (c) 2010 Nikolai Kondrashov + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> + +#include "hid-ids.h" + +/* + * The original descriptors of WPXXXXU tablets have three report IDs, of + * which only two are used (8 and 9), and the remaining (7) seems to have + * the originally intended pen description which was abandoned for some + * reason. From this unused description it is possible to extract the + * actual physical extents and resolution. All the models use the same + * descriptor with different extents for the unused report ID. + * + * Here it is: + * + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Pen), ; Pen (02h, application collection) + * Collection (Application), + * Report ID (7), + * Usage (Stylus), ; Stylus (20h, logical collection) + * Collection (Physical), + * Usage (Tip Switch), ; Tip switch (42h, momentary control) + * Usage (Barrel Switch), ; Barrel switch (44h, momentary control) + * Usage (Eraser), ; Eraser (45h, momentary control) + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (3), + * Input (Variable), + * Report Count (3), + * Input (Constant, Variable), + * Usage (In Range), ; In range (32h, momentary control) + * Report Count (1), + * Input (Variable), + * Report Count (1), + * Input (Constant, Variable), + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (X), ; X (30h, dynamic value) + * Report Size (16), + * Report Count (1), + * Push, + * Unit Exponent (13), + * Unit (Inch^3), + * Physical Minimum (0), + * Physical Maximum (Xpm), + * Logical Maximum (Xlm), + * Input (Variable), + * Usage (Y), ; Y (31h, dynamic value) + * Physical Maximum (Ypm), + * Logical Maximum (Ylm), + * Input (Variable), + * Pop, + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) + * Logical Maximum (1023), + * Input (Variable), + * Report Size (16), + * End Collection, + * End Collection, + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (Mouse), ; Mouse (02h, application collection) + * Collection (Application), + * Report ID (8), + * Usage (Pointer), ; Pointer (01h, physical collection) + * Collection (Physical), + * Usage Page (Button), ; Button (09h) + * Usage Minimum (01h), + * Usage Maximum (03h), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Count (3), + * Report Size (1), + * Input (Variable), + * Report Count (5), + * Input (Constant), + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (X), ; X (30h, dynamic value) + * Usage (Y), ; Y (31h, dynamic value) + * Usage (Wheel), ; Wheel (38h, dynamic value) + * Usage (00h), + * Logical Minimum (-127), + * Logical Maximum (127), + * Report Size (8), + * Report Count (4), + * Input (Variable, Relative), + * End Collection, + * End Collection, + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (Mouse), ; Mouse (02h, application collection) + * Collection (Application), + * Report ID (9), + * Usage (Pointer), ; Pointer (01h, physical collection) + * Collection (Physical), + * Usage Page (Button), ; Button (09h) + * Usage Minimum (01h), + * Usage Maximum (03h), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Count (3), + * Report Size (1), + * Input (Variable), + * Report Count (5), + * Input (Constant), + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (X), ; X (30h, dynamic value) + * Usage (Y), ; Y (31h, dynamic value) + * Logical Minimum (0), + * Logical Maximum (32767), + * Physical Minimum (0), + * Physical Maximum (32767), + * Report Count (2), + * Report Size (16), + * Input (Variable), + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) + * Logical Maximum (1023), + * Report Count (1), + * Report Size (16), + * Input (Variable), + * End Collection, + * End Collection + * + * Here are the extents values for the WPXXXXU models: + * + * Xpm Xlm Ypm Ylm + * WP4030U 4000 8000 3000 6000 + * WP5540U 5500 11000 4000 8000 + * WP8060U 8000 16000 6000 12000 + * + * This suggests that all of them have 2000 LPI resolution, as advertised. + */ + +/* Size of the original descriptor of WPXXXXU tablets */ +#define WPXXXXU_RDESC_ORIG_SIZE 212 + +/* + * Fixed WP4030U report descriptor. + * Although the hardware might actually support it, the mouse description + * has been removed, since there seems to be no devices having one and it + * wouldn't make much sense because of the working area size. + */ +static __u8 wp4030u_rdesc_fixed[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x09, /* Report ID (9), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x05, /* Report Count (5), */ + 0x81, 0x01, /* Input (Constant), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0xA0, 0x0F, /* Physical Maximum (4000), */ + 0x26, 0xFF, 0x7F, /* Logical Maximum (32767), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0xB8, 0x0B, /* Physical Maximum (3000), */ + 0x26, 0xFF, 0x7F, /* Logical Maximum (32767), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +/* Fixed WP5540U report descriptor */ +static __u8 wp5540u_rdesc_fixed[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x09, /* Report ID (9), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x05, /* Report Count (5), */ + 0x81, 0x01, /* Input (Constant), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x7C, 0x15, /* Physical Maximum (5500), */ + 0x26, 0xFF, 0x7F, /* Logical Maximum (32767), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0xA0, 0x0F, /* Physical Maximum (4000), */ + 0x26, 0xFF, 0x7F, /* Logical Maximum (32767), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0, /* End Collection, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x02, /* Usage (Mouse), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x08, /* Report ID (8), */ + 0x09, 0x01, /* Usage (Pointer), */ + 0xA0, /* Collection (Physical), */ + 0x75, 0x01, /* Report Size (1), */ + 0x05, 0x09, /* Usage Page (Button), */ + 0x19, 0x01, /* Usage Minimum (01h), */ + 0x29, 0x03, /* Usage Maximum (03h), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x05, /* Report Count (5), */ + 0x81, 0x01, /* Input (Constant), */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x75, 0x08, /* Report Size (8), */ + 0x09, 0x30, /* Usage (X), */ + 0x09, 0x31, /* Usage (Y), */ + 0x15, 0x81, /* Logical Minimum (-127), */ + 0x25, 0x7F, /* Logical Maximum (127), */ + 0x95, 0x02, /* Report Count (2), */ + 0x81, 0x06, /* Input (Variable, Relative), */ + 0x09, 0x38, /* Usage (Wheel), */ + 0x15, 0xFF, /* Logical Minimum (-1), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x06, /* Input (Variable, Relative), */ + 0x81, 0x01, /* Input (Constant), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +/* Fixed WP8060U report descriptor */ +static __u8 wp8060u_rdesc_fixed[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x09, /* Report ID (9), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x05, /* Report Count (5), */ + 0x81, 0x01, /* Input (Constant), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x40, 0x1F, /* Physical Maximum (8000), */ + 0x26, 0xFF, 0x7F, /* Logical Maximum (32767), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x70, 0x17, /* Physical Maximum (6000), */ + 0x26, 0xFF, 0x7F, /* Logical Maximum (32767), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0, /* End Collection, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x02, /* Usage (Mouse), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x08, /* Report ID (8), */ + 0x09, 0x01, /* Usage (Pointer), */ + 0xA0, /* Collection (Physical), */ + 0x75, 0x01, /* Report Size (1), */ + 0x05, 0x09, /* Usage Page (Button), */ + 0x19, 0x01, /* Usage Minimum (01h), */ + 0x29, 0x03, /* Usage Maximum (03h), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x05, /* Report Count (5), */ + 0x81, 0x01, /* Input (Constant), */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x75, 0x08, /* Report Size (8), */ + 0x09, 0x30, /* Usage (X), */ + 0x09, 0x31, /* Usage (Y), */ + 0x15, 0x81, /* Logical Minimum (-127), */ + 0x25, 0x7F, /* Logical Maximum (127), */ + 0x95, 0x02, /* Report Count (2), */ + 0x81, 0x06, /* Input (Variable, Relative), */ + 0x09, 0x38, /* Usage (Wheel), */ + 0x15, 0xFF, /* Logical Minimum (-1), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x06, /* Input (Variable, Relative), */ + 0x81, 0x01, /* Input (Constant), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +/* + * Original PF1209 report descriptor. + * + * The descriptor is similar to WPXXXXU descriptors, with an addition of a + * feature report (ID 4) of unknown purpose. + * + * Although the advertised resolution is 4000 LPI the unused report ID + * (taken from WPXXXXU, it seems) states 2000 LPI, but it is probably + * incorrect and is a result of blind copying without understanding. Anyway + * the real logical extents are always scaled to 0..32767, which IMHO spoils + * the precision. + * + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Pen), ; Pen (02h, application collection) + * Collection (Application), + * Report ID (7), + * Usage (Stylus), ; Stylus (20h, logical collection) + * Collection (Physical), + * Usage (Tip Switch), ; Tip switch (42h, momentary control) + * Usage (Barrel Switch), ; Barrel switch (44h, momentary control) + * Usage (Eraser), ; Eraser (45h, momentary control) + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (3), + * Input (Variable), + * Report Count (3), + * Input (Constant, Variable), + * Usage (In Range), ; In range (32h, momentary control) + * Report Count (1), + * Input (Variable), + * Report Count (1), + * Input (Constant, Variable), + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (X), ; X (30h, dynamic value) + * Report Size (16), + * Report Count (1), + * Push, + * Unit Exponent (13), + * Unit (Inch^3), + * Physical Minimum (0), + * Physical Maximum (12000), + * Logical Maximum (24000), + * Input (Variable), + * Usage (Y), ; Y (31h, dynamic value) + * Physical Maximum (9000), + * Logical Maximum (18000), + * Input (Variable), + * Pop, + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) + * Logical Maximum (1023), + * Input (Variable), + * Report Size (16), + * End Collection, + * End Collection, + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (Mouse), ; Mouse (02h, application collection) + * Collection (Application), + * Report ID (8), + * Usage (Pointer), ; Pointer (01h, physical collection) + * Collection (Physical), + * Usage Page (Button), ; Button (09h) + * Usage Minimum (01h), + * Usage Maximum (03h), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Count (3), + * Report Size (1), + * Input (Variable), + * Report Count (5), + * Input (Constant), + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (X), ; X (30h, dynamic value) + * Usage (Y), ; Y (31h, dynamic value) + * Usage (Wheel), ; Wheel (38h, dynamic value) + * Usage (00h), + * Logical Minimum (-127), + * Logical Maximum (127), + * Report Size (8), + * Report Count (4), + * Input (Variable, Relative), + * End Collection, + * End Collection, + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (Mouse), ; Mouse (02h, application collection) + * Collection (Application), + * Report ID (9), + * Usage (Pointer), ; Pointer (01h, physical collection) + * Collection (Physical), + * Usage Page (Button), ; Button (09h) + * Usage Minimum (01h), + * Usage Maximum (03h), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Count (3), + * Report Size (1), + * Input (Variable), + * Report Count (5), + * Input (Constant), + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (X), ; X (30h, dynamic value) + * Usage (Y), ; Y (31h, dynamic value) + * Logical Minimum (0), + * Logical Maximum (32767), + * Physical Minimum (0), + * Physical Maximum (32767), + * Report Count (2), + * Report Size (16), + * Input (Variable), + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) + * Logical Maximum (1023), + * Report Count (1), + * Report Size (16), + * Input (Variable), + * End Collection, + * End Collection, + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (00h), + * Collection (Application), + * Report ID (4), + * Logical Minimum (0), + * Logical Maximum (255), + * Usage (00h), + * Report Size (8), + * Report Count (3), + * Feature (Variable), + * End Collection + */ + +/* Size of the original descriptor of PF1209 tablet */ +#define PF1209_RDESC_ORIG_SIZE 234 + +/* + * Fixed PF1209 report descriptor + * + * The descriptor is fixed similarly to WP5540U and WP8060U, plus the + * feature report is removed, because its purpose is unknown and it is of no + * use to the generic HID driver anyway for now. + */ +static __u8 pf1209_rdesc_fixed[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x09, /* Report ID (9), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x05, /* Report Count (5), */ + 0x81, 0x01, /* Input (Constant), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0xE0, 0x2E, /* Physical Maximum (12000), */ + 0x26, 0xFF, 0x7F, /* Logical Maximum (32767), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x28, 0x23, /* Physical Maximum (9000), */ + 0x26, 0xFF, 0x7F, /* Logical Maximum (32767), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0, /* End Collection, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x02, /* Usage (Mouse), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x08, /* Report ID (8), */ + 0x09, 0x01, /* Usage (Pointer), */ + 0xA0, /* Collection (Physical), */ + 0x75, 0x01, /* Report Size (1), */ + 0x05, 0x09, /* Usage Page (Button), */ + 0x19, 0x01, /* Usage Minimum (01h), */ + 0x29, 0x03, /* Usage Maximum (03h), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x05, /* Report Count (5), */ + 0x81, 0x01, /* Input (Constant), */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x75, 0x08, /* Report Size (8), */ + 0x09, 0x30, /* Usage (X), */ + 0x09, 0x31, /* Usage (Y), */ + 0x15, 0x81, /* Logical Minimum (-127), */ + 0x25, 0x7F, /* Logical Maximum (127), */ + 0x95, 0x02, /* Report Count (2), */ + 0x81, 0x06, /* Input (Variable, Relative), */ + 0x09, 0x38, /* Usage (Wheel), */ + 0x15, 0xFF, /* Logical Minimum (-1), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x06, /* Input (Variable, Relative), */ + 0x81, 0x01, /* Input (Constant), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) +{ + switch (hdev->product) { + case USB_DEVICE_ID_UCLOGIC_TABLET_PF1209: + if (*rsize == PF1209_RDESC_ORIG_SIZE) { + rdesc = pf1209_rdesc_fixed; + *rsize = sizeof(pf1209_rdesc_fixed); + } + break; + case USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U: + if (*rsize == WPXXXXU_RDESC_ORIG_SIZE) { + rdesc = wp4030u_rdesc_fixed; + *rsize = sizeof(wp4030u_rdesc_fixed); + } + break; + case USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U: + if (*rsize == WPXXXXU_RDESC_ORIG_SIZE) { + rdesc = wp5540u_rdesc_fixed; + *rsize = sizeof(wp5540u_rdesc_fixed); + } + break; + case USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U: + if (*rsize == WPXXXXU_RDESC_ORIG_SIZE) { + rdesc = wp8060u_rdesc_fixed; + *rsize = sizeof(wp8060u_rdesc_fixed); + } + break; + } + + return rdesc; +} + +static const struct hid_device_id uclogic_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, + USB_DEVICE_ID_UCLOGIC_TABLET_PF1209) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, + USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, + USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U) }, + { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, + USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) }, + { } +}; +MODULE_DEVICE_TABLE(hid, uclogic_devices); + +static struct hid_driver uclogic_driver = { + .name = "uclogic", + .id_table = uclogic_devices, + .report_fixup = uclogic_report_fixup, +}; + +static int __init uclogic_init(void) +{ + return hid_register_driver(&uclogic_driver); +} + +static void __exit uclogic_exit(void) +{ + hid_unregister_driver(&uclogic_driver); +} + +module_init(uclogic_init); +module_exit(uclogic_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/hid/hid-waltop.c b/drivers/hid/hid-waltop.c new file mode 100644 index 00000000000..b3a4163f2e6 --- /dev/null +++ b/drivers/hid/hid-waltop.c @@ -0,0 +1,1099 @@ +/* + * HID driver for Waltop devices not fully compliant with HID standard + * + * Copyright (c) 2010 Nikolai Kondrashov + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> + +#include "hid-ids.h" + +/* + * There exists an official driver on the manufacturer's website, which + * wasn't submitted to the kernel, for some reason. The official driver + * doesn't seem to support extra features of some tablets, like wheels. + * + * It shows that the feature report ID 2 could be used to control any waltop + * tablet input mode, switching it between "default", "tablet" and "ink". + * + * This driver only uses "default" mode for all the supported tablets. This + * mode tries to be HID-compatible (not very successfully), but cripples the + * resolution of some tablets. + * + * The "tablet" mode uses some proprietary, yet decipherable protocol, which + * represents the correct resolution, but is possibly HID-incompatible (i.e. + * indescribable by a report descriptor). + * + * The purpose of the "ink" mode is unknown. + * + * The feature reports needed for switching to each mode are these: + * + * 02 16 00 default + * 02 16 01 tablet + * 02 16 02 ink + */ + +/* + * Original Slim Tablet 5.8 inch report descriptor. + * + * All the reports except the report with ID 16 (the stylus) are unused, + * possibly because the tablet is not configured to, or because they were + * just copied from a more capable model. The full purpose of features + * described for report ID 2 is unknown. + * + * The stylus buttons are described as three bit fields, whereas actually + * it's an "array", i.e. they're reported as button numbers (1, 2 and 3). + * The "eraser" field is not used. There is also a "push" without a "pop" in + * the stylus description. + * + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (Mouse), ; Mouse (02h, application collection) + * Collection (Application), + * Report ID (1), + * Usage (Pointer), ; Pointer (01h, physical collection) + * Collection (Physical), + * Usage Page (Button), ; Button (09h) + * Usage Minimum (01h), + * Usage Maximum (05h), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (5), + * Input (Variable), + * Report Size (3), + * Report Count (1), + * Input (Constant, Variable), + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (X), ; X (30h, dynamic value) + * Usage (Y), ; Y (31h, dynamic value) + * Usage (Wheel), ; Wheel (38h, dynamic value) + * Logical Minimum (-127), + * Logical Maximum (127), + * Report Size (8), + * Report Count (3), + * Input (Variable, Relative), + * End Collection, + * End Collection, + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Pen), ; Pen (02h, application collection) + * Collection (Application), + * Report ID (2), + * Usage (Stylus), ; Stylus (20h, logical collection) + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (7), + * Input (Variable), + * Usage (Azimuth), ; Azimuth (3Fh, dynamic value) + * Usage (Altitude), ; Altitude (40h, dynamic value) + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (2), + * Feature (Variable), + * End Collection, + * Report ID (5), + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Stylus), ; Stylus (20h, logical collection) + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (7), + * Input (Variable), + * End Collection, + * Report ID (10), + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Stylus), ; Stylus (20h, logical collection) + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (3), + * Input (Variable), + * End Collection, + * Report ID (16), + * Usage (Stylus), ; Stylus (20h, logical collection) + * Collection (Physical), + * Usage (Tip Switch), ; Tip switch (42h, momentary control) + * Usage (Barrel Switch), ; Barrel switch (44h, momentary control) + * Usage (Invert), ; Invert (3Ch, momentary control) + * Usage (Eraser), ; Eraser (45h, momentary control) + * Usage (In Range), ; In range (32h, momentary control) + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (5), + * Input (Variable), + * Report Count (3), + * Input (Constant, Variable), + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (X), ; X (30h, dynamic value) + * Report Size (16), + * Report Count (1), + * Push, + * Unit Exponent (13), + * Unit (Inch^3), + * Logical Minimum (0), + * Logical Maximum (10000), + * Physical Minimum (0), + * Physical Maximum (10000), + * Input (Variable), + * Usage (Y), ; Y (31h, dynamic value) + * Logical Maximum (6000), + * Physical Maximum (6000), + * Input (Variable), + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) + * Logical Minimum (0), + * Logical Maximum (1023), + * Physical Minimum (0), + * Physical Maximum (1023), + * Input (Variable), + * End Collection, + * End Collection + */ + +/* Size of the original report descriptor of Slim Tablet 5.8 inch */ +#define SLIM_TABLET_5_8_INCH_RDESC_ORIG_SIZE 222 + +/* + * Fixed Slim Tablet 5.8 inch descriptor. + * + * All the reports except the stylus report (ID 16) were removed as unused. + * The stylus buttons description was fixed. + */ +static __u8 slim_tablet_5_8_inch_rdesc_fixed[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x10, /* Report ID (16), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x15, 0x01, /* Logical Minimum (1), */ + 0x25, 0x03, /* Logical Maximum (3), */ + 0x75, 0x04, /* Report Size (4), */ + 0x95, 0x01, /* Report Count (1), */ + 0x80, /* Input, */ + 0x09, 0x32, /* Usage (In Range), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x75, 0x01, /* Report Size (1), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x88, 0x13, /* Physical Maximum (5000), */ + 0x26, 0x10, 0x27, /* Logical Maximum (10000), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0xB8, 0x0B, /* Physical Maximum (3000), */ + 0x26, 0x70, 0x17, /* Logical Maximum (6000), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +/* + * Original Slim Tablet 12.1 inch report descriptor. + * + * The descriptor is similar to the Slim Tablet 5.8 inch descriptor with the + * addition of a keyboard report, seemingly unused. It may have get here + * from a Media Tablet - probably an unimplemented feature. + * + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (Mouse), ; Mouse (02h, application collection) + * Collection (Application), + * Report ID (1), + * Usage (Pointer), ; Pointer (01h, physical collection) + * Collection (Physical), + * Usage Page (Button), ; Button (09h) + * Usage Minimum (01h), + * Usage Maximum (05h), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (5), + * Input (Variable), + * Report Size (3), + * Report Count (1), + * Input (Constant, Variable), + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (X), ; X (30h, dynamic value) + * Usage (Y), ; Y (31h, dynamic value) + * Usage (Wheel), ; Wheel (38h, dynamic value) + * Logical Minimum (-127), + * Logical Maximum (127), + * Report Size (8), + * Report Count (3), + * Input (Variable, Relative), + * End Collection, + * End Collection, + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Pen), ; Pen (02h, application collection) + * Collection (Application), + * Report ID (2), + * Usage (Stylus), ; Stylus (20h, logical collection) + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (7), + * Input (Variable), + * Usage (Azimuth), ; Azimuth (3Fh, dynamic value) + * Usage (Altitude), ; Altitude (40h, dynamic value) + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (2), + * Feature (Variable), + * End Collection, + * Report ID (5), + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Stylus), ; Stylus (20h, logical collection) + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (7), + * Input (Variable), + * End Collection, + * Report ID (10), + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Stylus), ; Stylus (20h, logical collection) + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (3), + * Input (Variable), + * End Collection, + * Report ID (16), + * Usage (Stylus), ; Stylus (20h, logical collection) + * Collection (Physical), + * Usage (Tip Switch), ; Tip switch (42h, momentary control) + * Usage (Barrel Switch), ; Barrel switch (44h, momentary control) + * Usage (Invert), ; Invert (3Ch, momentary control) + * Usage (Eraser), ; Eraser (45h, momentary control) + * Usage (In Range), ; In range (32h, momentary control) + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (5), + * Input (Variable), + * Report Count (3), + * Input (Constant, Variable), + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (X), ; X (30h, dynamic value) + * Report Size (16), + * Report Count (1), + * Push, + * Unit Exponent (13), + * Unit (Inch^3), + * Logical Minimum (0), + * Logical Maximum (20000), + * Physical Minimum (0), + * Physical Maximum (20000), + * Input (Variable), + * Usage (Y), ; Y (31h, dynamic value) + * Logical Maximum (12500), + * Physical Maximum (12500), + * Input (Variable), + * Usage Page (Digitizer), ; Digitizer (0Dh) + * Usage (Tip Pressure), ; Tip pressure (30h, dynamic value) + * Logical Minimum (0), + * Logical Maximum (1023), + * Physical Minimum (0), + * Physical Maximum (1023), + * Input (Variable), + * End Collection, + * End Collection, + * Usage Page (Desktop), ; Generic desktop controls (01h) + * Usage (Keyboard), ; Keyboard (06h, application collection) + * Collection (Application), + * Report ID (13), + * Usage Page (Keyboard), ; Keyboard/keypad (07h) + * Usage Minimum (KB Leftcontrol), ; Keyboard left control + * ; (E0h, dynamic value) + * Usage Maximum (KB Right GUI), ; Keyboard right GUI (E7h, dynamic value) + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (8), + * Input (Variable), + * Report Size (8), + * Report Count (1), + * Input (Constant), + * Usage Page (Keyboard), ; Keyboard/keypad (07h) + * Usage Minimum (None), ; No event (00h, selector) + * Usage Maximum (KB Application), ; Keyboard Application (65h, selector) + * Logical Minimum (0), + * Logical Maximum (101), + * Report Size (8), + * Report Count (5), + * Input, + * End Collection + */ + +/* Size of the original report descriptor of Slim Tablet 12.1 inch */ +#define SLIM_TABLET_12_1_INCH_RDESC_ORIG_SIZE 269 + +/* + * Fixed Slim Tablet 12.1 inch descriptor. + * + * All the reports except the stylus report (ID 16) were removed as unused. + * The stylus buttons description was fixed. + */ +static __u8 slim_tablet_12_1_inch_rdesc_fixed[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x10, /* Report ID (16), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x15, 0x01, /* Logical Minimum (1), */ + 0x25, 0x03, /* Logical Maximum (3), */ + 0x75, 0x04, /* Report Size (4), */ + 0x95, 0x01, /* Report Count (1), */ + 0x80, /* Input, */ + 0x09, 0x32, /* Usage (In Range), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x75, 0x01, /* Report Size (1), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x10, 0x27, /* Physical Maximum (10000), */ + 0x26, 0x20, 0x4E, /* Logical Maximum (20000), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x6A, 0x18, /* Physical Maximum (6250), */ + 0x26, 0xD4, 0x30, /* Logical Maximum (12500), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0 /* End Collection */ +}; + +/* + * Original Media Tablet 10.6 inch report descriptor. + * + * There are at least two versions of this model in the wild. They are + * represented by Genius G-Pen M609 (older version) and Genius G-Pen M609X + * (newer version). + * + * Both versions have the usual pen with two barrel buttons and two + * identical wheels with center buttons in the top corners of the tablet + * base. They also have buttons on the top, between the wheels, for + * selecting the wheels' functions and wide/standard mode. In the wide mode + * the whole working surface is sensed, in the standard mode a narrower area + * is sensed, but the logical report extents remain the same. These modes + * correspond roughly to 16:9 and 4:3 aspect ratios respectively. + * + * The older version has three wheel function buttons ("scroll", "zoom" and + * "volume") and two separate buttons for wide and standard mode. The newer + * version has four wheel function buttons (plus "brush") and only one + * button is used for selecting wide/standard mode. So, the total number of + * buttons remains the same, but one of the mode buttons is repurposed as a + * wheels' function button in the newer version. + * + * The wheel functions are: + * scroll - the wheels act as scroll wheels, the center buttons switch + * between vertical and horizontal scrolling; + * zoom - the wheels zoom in/out, the buttons supposedly reset to 100%; + * volume - the wheels control the sound volume, the buttons mute; + * brush - the wheels are supposed to control brush width in a graphics + * editor, the buttons do nothing. + * + * Below is the newer version's report descriptor. It may very well be that + * the older version's descriptor is different and thus it won't be + * supported. + * + * The mouse report (ID 1) only uses the wheel field for reporting the tablet + * wheels' scroll mode. The keyboard report (ID 13) is used to report the + * wheels' zoom and brush control functions as key presses. The report ID 12 + * is used to report the wheels' volume control functions. The stylus report + * (ID 16) has the same problems as the Slim Tablet 5.8 inch report has. + * + * The rest of the reports are unused, at least in the default configuration. + * The purpose of the features is unknown. + * + * Usage Page (Desktop), + * Usage (Mouse), + * Collection (Application), + * Report ID (1), + * Usage (Pointer), + * Collection (Physical), + * Usage Page (Button), + * Usage Minimum (01h), + * Usage Maximum (05h), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (5), + * Input (Variable), + * Report Size (3), + * Report Count (1), + * Input (Constant, Variable), + * Usage Page (Desktop), + * Usage (X), + * Usage (Y), + * Usage (Wheel), + * Logical Minimum (-127), + * Logical Maximum (127), + * Report Size (8), + * Report Count (3), + * Input (Variable, Relative), + * End Collection, + * End Collection, + * Usage Page (Digitizer), + * Usage (Pen), + * Collection (Application), + * Report ID (2), + * Usage (Stylus), + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (7), + * Input (Variable), + * Usage (Azimuth), + * Usage (Altitude), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (2), + * Feature (Variable), + * End Collection, + * Report ID (5), + * Usage Page (Digitizer), + * Usage (Stylus), + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (7), + * Input (Variable), + * End Collection, + * Report ID (10), + * Usage Page (Digitizer), + * Usage (Stylus), + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (7), + * Input (Variable), + * End Collection, + * Report ID (16), + * Usage (Stylus), + * Collection (Physical), + * Usage (Tip Switch), + * Usage (Barrel Switch), + * Usage (Invert), + * Usage (Eraser), + * Usage (In Range), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (5), + * Input (Variable), + * Report Count (3), + * Input (Constant, Variable), + * Usage Page (Desktop), + * Usage (X), + * Report Size (16), + * Report Count (1), + * Push, + * Unit Exponent (13), + * Unit (Inch^3), + * Logical Minimum (0), + * Logical Maximum (18000), + * Physical Minimum (0), + * Physical Maximum (18000), + * Input (Variable), + * Usage (Y), + * Logical Maximum (11000), + * Physical Maximum (11000), + * Input (Variable), + * Usage Page (Digitizer), + * Usage (Tip Pressure), + * Logical Minimum (0), + * Logical Maximum (1023), + * Physical Minimum (0), + * Physical Maximum (1023), + * Input (Variable), + * End Collection, + * End Collection, + * Usage Page (Desktop), + * Usage (Keyboard), + * Collection (Application), + * Report ID (13), + * Usage Page (Keyboard), + * Usage Minimum (KB Leftcontrol), + * Usage Maximum (KB Right GUI), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (8), + * Input (Variable), + * Report Size (8), + * Report Count (1), + * Input (Constant), + * Usage Page (Keyboard), + * Usage Minimum (None), + * Usage Maximum (KB Application), + * Logical Minimum (0), + * Logical Maximum (101), + * Report Size (8), + * Report Count (5), + * Input, + * End Collection, + * Usage Page (Consumer), + * Usage (Consumer Control), + * Collection (Application), + * Report ID (12), + * Usage (Volume Inc), + * Usage (Volume Dec), + * Usage (Mute), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (3), + * Input (Variable, Relative), + * Report Size (5), + * Report Count (1), + * Input (Constant, Variable, Relative), + * End Collection + */ + +/* Size of the original report descriptor of Media Tablet 10.6 inch */ +#define MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE 300 + +/* + * Fixed Media Tablet 10.6 inch descriptor. + * + * The descriptions of reports unused in the default configuration are + * removed. The stylus report (ID 16) is fixed similarly to Slim Tablet 5.8 + * inch. The unused mouse report (ID 1) fields are replaced with constant + * padding. + * + * The keyboard report (ID 13) is hacked to instead have an "array" field + * reporting consumer page controls, and all the unused bits are masked out + * with constant padding. The "brush" wheels' function is represented as "Scan + * Previous/Next Track" controls due to the lack of brush controls in the + * usage tables specification. + */ +static __u8 media_tablet_10_6_inch_rdesc_fixed[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x10, /* Report ID (16), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x15, 0x01, /* Logical Minimum (1), */ + 0x25, 0x03, /* Logical Maximum (3), */ + 0x75, 0x04, /* Report Size (4), */ + 0x95, 0x01, /* Report Count (1), */ + 0x80, /* Input, */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0x32, /* Usage (In Range), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0x28, 0x23, /* Physical Maximum (9000), */ + 0x26, 0x50, 0x46, /* Logical Maximum (18000), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x7C, 0x15, /* Physical Maximum (5500), */ + 0x26, 0xF8, 0x2A, /* Logical Maximum (11000), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0, /* End Collection, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x02, /* Usage (Mouse), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x01, /* Report ID (1), */ + 0x09, 0x01, /* Usage (Pointer), */ + 0xA0, /* Collection (Physical), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x95, 0x02, /* Report Count (2), */ + 0x15, 0xFF, /* Logical Minimum (-1), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x09, 0x38, /* Usage (Wheel), */ + 0x0B, 0x38, 0x02, /* Usage (Consumer AC Pan), */ + 0x0C, 0x00, + 0x81, 0x06, /* Input (Variable, Relative), */ + 0x95, 0x02, /* Report Count (2), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0xC0, /* End Collection, */ + 0xC0, /* End Collection, */ + 0x05, 0x0C, /* Usage Page (Consumer), */ + 0x09, 0x01, /* Usage (Consumer Control), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x0D, /* Report ID (13), */ + 0x95, 0x01, /* Report Count (1), */ + 0x75, 0x10, /* Report Size (16), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x0A, 0x2F, 0x02, /* Usage (AC Zoom), */ + 0x0A, 0x2E, 0x02, /* Usage (AC Zoom Out), */ + 0x0A, 0x2D, 0x02, /* Usage (AC Zoom In), */ + 0x09, 0xB6, /* Usage (Scan Previous Track), */ + 0x09, 0xB5, /* Usage (Scan Next Track), */ + 0x08, /* Usage (00h), */ + 0x08, /* Usage (00h), */ + 0x08, /* Usage (00h), */ + 0x08, /* Usage (00h), */ + 0x08, /* Usage (00h), */ + 0x0A, 0x2E, 0x02, /* Usage (AC Zoom Out), */ + 0x0A, 0x2D, 0x02, /* Usage (AC Zoom In), */ + 0x15, 0x0C, /* Logical Minimum (12), */ + 0x25, 0x17, /* Logical Maximum (23), */ + 0x75, 0x05, /* Report Size (5), */ + 0x80, /* Input, */ + 0x75, 0x03, /* Report Size (3), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x75, 0x20, /* Report Size (32), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0xC0, /* End Collection, */ + 0x09, 0x01, /* Usage (Consumer Control), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x0C, /* Report ID (12), */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0xE9, /* Usage (Volume Inc), */ + 0x09, 0xEA, /* Usage (Volume Dec), */ + 0x09, 0xE2, /* Usage (Mute), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x06, /* Input (Variable, Relative), */ + 0x95, 0x35, /* Report Count (53), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0xC0 /* End Collection */ +}; + +/* + * Original Media Tablet 14.1 inch report descriptor. + * + * There are at least two versions of this model in the wild. They are + * represented by Genius G-Pen M712 (older version) and Genius G-Pen M712X + * (newer version). The hardware difference between these versions is the same + * as between older and newer versions of Media Tablet 10.6 inch. The report + * descriptors are identical for both versions. + * + * The function, behavior and report descriptor of this tablet is similar to + * that of Media Tablet 10.6 inch. However, there is one more field (with + * Consumer AC Pan usage) in the mouse description. Then the tablet X and Y + * logical extents both get scaled to 0..16383 range (a hardware limit?), + * which kind of defeats the advertised 4000 LPI resolution, considering the + * physical extents of 12x7.25 inches. Plus, reports 5, 10 and 255 are used + * sometimes (while moving the pen) with unknown purpose. Also, the key codes + * generated for zoom in/out are different. + * + * Usage Page (Desktop), + * Usage (Mouse), + * Collection (Application), + * Report ID (1), + * Usage (Pointer), + * Collection (Physical), + * Usage Page (Button), + * Usage Minimum (01h), + * Usage Maximum (05h), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (5), + * Input (Variable), + * Report Size (3), + * Report Count (1), + * Input (Constant, Variable), + * Usage Page (Desktop), + * Usage (X), + * Usage (Y), + * Usage (Wheel), + * Logical Minimum (-127), + * Logical Maximum (127), + * Report Size (8), + * Report Count (3), + * Input (Variable, Relative), + * Usage Page (Consumer), + * Logical Minimum (-127), + * Logical Maximum (127), + * Report Size (8), + * Report Count (1), + * Usage (AC Pan), + * Input (Variable, Relative), + * End Collection, + * End Collection, + * Usage Page (Digitizer), + * Usage (Pen), + * Collection (Application), + * Report ID (2), + * Usage (Stylus), + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (7), + * Input (Variable), + * Usage (Azimuth), + * Usage (Altitude), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (2), + * Feature (Variable), + * End Collection, + * Report ID (5), + * Usage Page (Digitizer), + * Usage (Stylus), + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (7), + * Input (Variable), + * End Collection, + * Report ID (10), + * Usage Page (Digitizer), + * Usage (Stylus), + * Collection (Physical), + * Usage (00h), + * Logical Minimum (0), + * Logical Maximum (255), + * Report Size (8), + * Report Count (7), + * Input (Variable), + * End Collection, + * Report ID (16), + * Usage (Stylus), + * Collection (Physical), + * Usage (Tip Switch), + * Usage (Barrel Switch), + * Usage (Invert), + * Usage (Eraser), + * Usage (In Range), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (5), + * Input (Variable), + * Report Count (3), + * Input (Constant, Variable), + * Usage Page (Desktop), + * Usage (X), + * Report Size (16), + * Report Count (1), + * Push, + * Unit Exponent (13), + * Unit (Inch^3), + * Logical Minimum (0), + * Logical Maximum (16383), + * Physical Minimum (0), + * Physical Maximum (16383), + * Input (Variable), + * Usage (Y), + * Input (Variable), + * Usage Page (Digitizer), + * Usage (Tip Pressure), + * Logical Minimum (0), + * Logical Maximum (1023), + * Physical Minimum (0), + * Physical Maximum (1023), + * Input (Variable), + * End Collection, + * End Collection, + * Usage Page (Desktop), + * Usage (Keyboard), + * Collection (Application), + * Report ID (13), + * Usage Page (Keyboard), + * Usage Minimum (KB Leftcontrol), + * Usage Maximum (KB Right GUI), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (8), + * Input (Variable), + * Report Size (8), + * Report Count (1), + * Input (Constant), + * Usage Page (Keyboard), + * Usage Minimum (None), + * Usage Maximum (KB Application), + * Logical Minimum (0), + * Logical Maximum (101), + * Report Size (8), + * Report Count (5), + * Input, + * End Collection, + * Usage Page (Consumer), + * Usage (Consumer Control), + * Collection (Application), + * Report ID (12), + * Usage (Volume Inc), + * Usage (Volume Dec), + * Usage (Mute), + * Logical Minimum (0), + * Logical Maximum (1), + * Report Size (1), + * Report Count (3), + * Input (Variable, Relative), + * Report Size (5), + * Report Count (1), + * Input (Constant, Variable, Relative), + * End Collection + */ + +/* Size of the original report descriptor of Media Tablet 14.1 inch */ +#define MEDIA_TABLET_14_1_INCH_RDESC_ORIG_SIZE 309 + +/* + * Fixed Media Tablet 14.1 inch descriptor. + * It is fixed similarly to the Media Tablet 10.6 inch descriptor. + */ +static __u8 media_tablet_14_1_inch_rdesc_fixed[] = { + 0x05, 0x0D, /* Usage Page (Digitizer), */ + 0x09, 0x02, /* Usage (Pen), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x10, /* Report ID (16), */ + 0x09, 0x20, /* Usage (Stylus), */ + 0xA0, /* Collection (Physical), */ + 0x09, 0x42, /* Usage (Tip Switch), */ + 0x09, 0x44, /* Usage (Barrel Switch), */ + 0x09, 0x46, /* Usage (Tablet Pick), */ + 0x15, 0x01, /* Logical Minimum (1), */ + 0x25, 0x03, /* Logical Maximum (3), */ + 0x75, 0x04, /* Report Size (4), */ + 0x95, 0x01, /* Report Count (1), */ + 0x80, /* Input, */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0x32, /* Usage (In Range), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x01, /* Report Count (1), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x75, 0x10, /* Report Size (16), */ + 0x95, 0x01, /* Report Count (1), */ + 0x14, /* Logical Minimum (0), */ + 0xA4, /* Push, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x65, 0x13, /* Unit (Inch), */ + 0x55, 0xFD, /* Unit Exponent (-3), */ + 0x34, /* Physical Minimum (0), */ + 0x09, 0x30, /* Usage (X), */ + 0x46, 0xE0, 0x2E, /* Physical Maximum (12000), */ + 0x26, 0xFF, 0x3F, /* Logical Maximum (16383), */ + 0x81, 0x02, /* Input (Variable), */ + 0x09, 0x31, /* Usage (Y), */ + 0x46, 0x52, 0x1C, /* Physical Maximum (7250), */ + 0x26, 0xFF, 0x3F, /* Logical Maximum (16383), */ + 0x81, 0x02, /* Input (Variable), */ + 0xB4, /* Pop, */ + 0x09, 0x30, /* Usage (Tip Pressure), */ + 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ + 0x81, 0x02, /* Input (Variable), */ + 0xC0, /* End Collection, */ + 0xC0, /* End Collection, */ + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x02, /* Usage (Mouse), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x01, /* Report ID (1), */ + 0x09, 0x01, /* Usage (Pointer), */ + 0xA0, /* Collection (Physical), */ + 0x75, 0x08, /* Report Size (8), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x95, 0x02, /* Report Count (2), */ + 0x15, 0xFF, /* Logical Minimum (-1), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x09, 0x38, /* Usage (Wheel), */ + 0x0B, 0x38, 0x02, /* Usage (Consumer AC Pan), */ + 0x0C, 0x00, + 0x81, 0x06, /* Input (Variable, Relative), */ + 0xC0, /* End Collection, */ + 0xC0, /* End Collection, */ + 0x05, 0x0C, /* Usage Page (Consumer), */ + 0x09, 0x01, /* Usage (Consumer Control), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x0D, /* Report ID (13), */ + 0x95, 0x01, /* Report Count (1), */ + 0x75, 0x10, /* Report Size (16), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x0A, 0x2F, 0x02, /* Usage (AC Zoom), */ + 0x0A, 0x2E, 0x02, /* Usage (AC Zoom Out), */ + 0x0A, 0x2D, 0x02, /* Usage (AC Zoom In), */ + 0x09, 0xB6, /* Usage (Scan Previous Track), */ + 0x09, 0xB5, /* Usage (Scan Next Track), */ + 0x08, /* Usage (00h), */ + 0x08, /* Usage (00h), */ + 0x08, /* Usage (00h), */ + 0x08, /* Usage (00h), */ + 0x08, /* Usage (00h), */ + 0x0A, 0x2E, 0x02, /* Usage (AC Zoom Out), */ + 0x0A, 0x2D, 0x02, /* Usage (AC Zoom In), */ + 0x15, 0x0C, /* Logical Minimum (12), */ + 0x25, 0x17, /* Logical Maximum (23), */ + 0x75, 0x05, /* Report Size (5), */ + 0x80, /* Input, */ + 0x75, 0x03, /* Report Size (3), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0x75, 0x20, /* Report Size (32), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0xC0, /* End Collection, */ + 0x09, 0x01, /* Usage (Consumer Control), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x0C, /* Report ID (12), */ + 0x75, 0x01, /* Report Size (1), */ + 0x09, 0xE9, /* Usage (Volume Inc), */ + 0x09, 0xEA, /* Usage (Volume Dec), */ + 0x09, 0xE2, /* Usage (Mute), */ + 0x14, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x95, 0x03, /* Report Count (3), */ + 0x81, 0x06, /* Input (Variable, Relative), */ + 0x75, 0x05, /* Report Size (5), */ + 0x81, 0x03, /* Input (Constant, Variable), */ + 0xC0 /* End Collection */ +}; + +static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) +{ + switch (hdev->product) { + case USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH: + if (*rsize == SLIM_TABLET_5_8_INCH_RDESC_ORIG_SIZE) { + rdesc = slim_tablet_5_8_inch_rdesc_fixed; + *rsize = sizeof(slim_tablet_5_8_inch_rdesc_fixed); + } + break; + case USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH: + if (*rsize == SLIM_TABLET_12_1_INCH_RDESC_ORIG_SIZE) { + rdesc = slim_tablet_12_1_inch_rdesc_fixed; + *rsize = sizeof(slim_tablet_12_1_inch_rdesc_fixed); + } + break; + case USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH: + if (*rsize == MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE) { + rdesc = media_tablet_10_6_inch_rdesc_fixed; + *rsize = sizeof(media_tablet_10_6_inch_rdesc_fixed); + } + break; + case USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH: + if (*rsize == MEDIA_TABLET_14_1_INCH_RDESC_ORIG_SIZE) { + rdesc = media_tablet_14_1_inch_rdesc_fixed; + *rsize = sizeof(media_tablet_14_1_inch_rdesc_fixed); + } + break; + } + return rdesc; +} + +static const struct hid_device_id waltop_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, + USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, + USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, + USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, + USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) }, + { } +}; +MODULE_DEVICE_TABLE(hid, waltop_devices); + +static struct hid_driver waltop_driver = { + .name = "waltop", + .id_table = waltop_devices, + .report_fixup = waltop_report_fixup, +}; + +static int __init waltop_init(void) +{ + return hid_register_driver(&waltop_driver); +} + +static void __exit waltop_exit(void) +{ + hid_unregister_driver(&waltop_driver); +} + +module_init(waltop_init); +module_exit(waltop_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/hid/hid-zydacron.c b/drivers/hid/hid-zydacron.c index 9e8d35a203e..aac1f927314 100644 --- a/drivers/hid/hid-zydacron.c +++ b/drivers/hid/hid-zydacron.c @@ -27,10 +27,10 @@ struct zc_device { * Zydacron remote control has an invalid HID report descriptor, * that needs fixing before we can parse it. */ -static void zc_report_fixup(struct hid_device *hdev, __u8 *rdesc, - unsigned int rsize) +static __u8 *zc_report_fixup(struct hid_device *hdev, __u8 *rdesc, + unsigned int *rsize) { - if (rsize >= 253 && + if (*rsize >= 253 && rdesc[0x96] == 0xbc && rdesc[0x97] == 0xff && rdesc[0xca] == 0xbc && rdesc[0xcb] == 0xff && rdesc[0xe1] == 0xbc && rdesc[0xe2] == 0xff) { @@ -40,6 +40,7 @@ static void zc_report_fixup(struct hid_device *hdev, __u8 *rdesc, rdesc[0x96] = rdesc[0xca] = rdesc[0xe1] = 0x0c; rdesc[0x97] = rdesc[0xcb] = rdesc[0xe2] = 0x00; } + return rdesc; } #define zc_map_key_clear(c) \ diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 925992f549f..8a4b32dca9f 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -218,9 +218,13 @@ static int hidraw_release(struct inode * inode, struct file * file) unsigned int minor = iminor(inode); struct hidraw *dev; struct hidraw_list *list = file->private_data; + int ret; - if (!hidraw_table[minor]) - return -ENODEV; + mutex_lock(&minors_lock); + if (!hidraw_table[minor]) { + ret = -ENODEV; + goto unlock; + } list_del(&list->node); dev = hidraw_table[minor]; @@ -233,10 +237,12 @@ static int hidraw_release(struct inode * inode, struct file * file) kfree(list->hidraw); } } - kfree(list); + ret = 0; +unlock: + mutex_unlock(&minors_lock); - return 0; + return ret; } static long hidraw_ioctl(struct file *file, unsigned int cmd, diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 599041a7f67..5489eab3a6b 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -807,9 +807,10 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co struct usb_host_interface *interface = intf->cur_altsetting; int ret; - if (usbhid->urbout) { + if (usbhid->urbout && report_type != HID_FEATURE_REPORT) { int actual_length; int skipped_report_id = 0; + if (buf[0] == 0x0) { /* Don't send the Report ID */ buf++; @@ -1469,9 +1470,6 @@ static int __init hid_init(void) retval = usbhid_quirks_init(quirks_param); if (retval) goto usbhid_quirks_init_fail; - retval = hiddev_init(); - if (retval) - goto hiddev_init_fail; retval = usb_register(&hid_driver); if (retval) goto usb_register_fail; @@ -1479,8 +1477,6 @@ static int __init hid_init(void) return 0; usb_register_fail: - hiddev_exit(); -hiddev_init_fail: usbhid_quirks_exit(); usbhid_quirks_init_fail: hid_unregister_driver(&hid_usb_driver); @@ -1493,7 +1489,6 @@ no_queue: static void __exit hid_exit(void) { usb_deregister(&hid_driver); - hiddev_exit(); usbhid_quirks_exit(); hid_unregister_driver(&hid_usb_driver); destroy_workqueue(resumption_waker); diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index f0260c699ad..2c185477eeb 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -34,7 +34,6 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_DWAV, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER, HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET }, - { USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_MOJO, USB_DEVICE_ID_RETRO_ADAPTER, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, @@ -63,6 +62,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET }, { USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET }, { USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET }, @@ -72,6 +72,10 @@ static const struct hid_blacklist { { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_QUAD_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index dfcb27613ec..fedd88df9a1 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -67,8 +67,6 @@ struct hiddev_list { struct mutex thread_lock; }; -static struct usb_driver hiddev_driver; - /* * Find a report, given the report's type and ID. The ID can be specified * indirectly by REPORT_ID_FIRST (which returns the first report of the given @@ -926,41 +924,3 @@ void hiddev_disconnect(struct hid_device *hid) kfree(hiddev); } } - -/* Currently this driver is a USB driver. It's not a conventional one in - * the sense that it doesn't probe at the USB level. Instead it waits to - * be connected by HID through the hiddev_connect / hiddev_disconnect - * routines. The reason to register as a USB device is to gain part of the - * minor number space from the USB major. - * - * In theory, should the HID code be generalized to more than one physical - * medium (say, IEEE 1384), this driver will probably need to register its - * own major number, and in doing so, no longer need to register with USB. - * At that point the probe routine and hiddev_driver struct below will no - * longer be useful. - */ - - -/* We never attach in this manner, and rely on HID to connect us. This - * is why there is no disconnect routine defined in the usb_driver either. - */ -static int hiddev_usbd_probe(struct usb_interface *intf, - const struct usb_device_id *hiddev_info) -{ - return -ENODEV; -} - -static /* const */ struct usb_driver hiddev_driver = { - .name = "hiddev", - .probe = hiddev_usbd_probe, -}; - -int __init hiddev_init(void) -{ - return usb_register(&hiddev_driver); -} - -void hiddev_exit(void) -{ - usb_deregister(&hiddev_driver); -} |