diff options
Diffstat (limited to 'drivers')
106 files changed, 1336 insertions, 1038 deletions
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 5ff17306612..6ae5e440436 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -415,7 +415,6 @@ static int acpi_pci_root_add(struct acpi_device *device, struct acpi_pci_root *root; struct acpi_pci_driver *driver; u32 flags, base_flags; - bool is_osc_granted = false; root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL); if (!root) @@ -476,6 +475,30 @@ static int acpi_pci_root_add(struct acpi_device *device, flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT; acpi_pci_osc_support(root, flags); + /* + * TBD: Need PCI interface for enumeration/configuration of roots. + */ + + mutex_lock(&acpi_pci_root_lock); + list_add_tail(&root->node, &acpi_pci_roots); + mutex_unlock(&acpi_pci_root_lock); + + /* + * Scan the Root Bridge + * -------------------- + * Must do this prior to any attempt to bind the root device, as the + * PCI namespace does not get created until this call is made (and + * thus the root bridge's pci_dev does not exist). + */ + root->bus = pci_acpi_scan_root(root); + if (!root->bus) { + printk(KERN_ERR PREFIX + "Bus %04x:%02x not present in PCI namespace\n", + root->segment, (unsigned int)root->secondary.start); + result = -ENODEV; + goto out_del_root; + } + /* Indicate support for various _OSC capabilities. */ if (pci_ext_cfg_avail()) flags |= OSC_EXT_PCI_CONFIG_SUPPORT; @@ -494,6 +517,7 @@ static int acpi_pci_root_add(struct acpi_device *device, flags = base_flags; } } + if (!pcie_ports_disabled && (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) { flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL @@ -514,54 +538,28 @@ static int acpi_pci_root_add(struct acpi_device *device, status = acpi_pci_osc_control_set(device->handle, &flags, OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); if (ACPI_SUCCESS(status)) { - is_osc_granted = true; dev_info(&device->dev, "ACPI _OSC control (0x%02x) granted\n", flags); + if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) { + /* + * We have ASPM control, but the FADT indicates + * that it's unsupported. Clear it. + */ + pcie_clear_aspm(root->bus); + } } else { - is_osc_granted = false; dev_info(&device->dev, "ACPI _OSC request failed (%s), " "returned control mask: 0x%02x\n", acpi_format_exception(status), flags); + pr_info("ACPI _OSC control for PCIe not granted, " + "disabling ASPM\n"); + pcie_no_aspm(); } } else { dev_info(&device->dev, - "Unable to request _OSC control " - "(_OSC support mask: 0x%02x)\n", flags); - } - - /* - * TBD: Need PCI interface for enumeration/configuration of roots. - */ - - mutex_lock(&acpi_pci_root_lock); - list_add_tail(&root->node, &acpi_pci_roots); - mutex_unlock(&acpi_pci_root_lock); - - /* - * Scan the Root Bridge - * -------------------- - * Must do this prior to any attempt to bind the root device, as the - * PCI namespace does not get created until this call is made (and - * thus the root bridge's pci_dev does not exist). - */ - root->bus = pci_acpi_scan_root(root); - if (!root->bus) { - printk(KERN_ERR PREFIX - "Bus %04x:%02x not present in PCI namespace\n", - root->segment, (unsigned int)root->secondary.start); - result = -ENODEV; - goto out_del_root; - } - - /* ASPM setting */ - if (is_osc_granted) { - if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) - pcie_clear_aspm(root->bus); - } else { - pr_info("ACPI _OSC control for PCIe not granted, " - "disabling ASPM\n"); - pcie_no_aspm(); + "Unable to request _OSC control " + "(_OSC support mask: 0x%02x)\n", flags); } pci_acpi_add_bus_pm_notifier(device, root->bus); diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index ffdd32d2260..2f48123d74c 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -150,6 +150,7 @@ enum piix_controller_ids { tolapai_sata, piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ ich8_sata_snb, + ich8_2port_sata_snb, }; struct piix_map_db { @@ -304,7 +305,7 @@ static const struct pci_device_id piix_pci_tbl[] = { /* SATA Controller IDE (Lynx Point) */ { 0x8086, 0x8c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Lynx Point) */ - { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb }, /* SATA Controller IDE (Lynx Point) */ { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (Lynx Point-LP) */ @@ -439,6 +440,7 @@ static const struct piix_map_db *piix_map_db_table[] = { [ich8m_apple_sata] = &ich8m_apple_map_db, [tolapai_sata] = &tolapai_map_db, [ich8_sata_snb] = &ich8_map_db, + [ich8_2port_sata_snb] = &ich8_2port_map_db, }; static struct pci_bits piix_enable_bits[] = { @@ -1242,6 +1244,16 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, + + [ich8_2port_sata_snb] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR + | PIIX_FLAG_PIO16, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, }; #define AHCI_PCI_BAR 5 diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 497adea1f0d..63c743baf92 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2329,7 +2329,7 @@ int ata_dev_configure(struct ata_device *dev) * from SATA Settings page of Identify Device Data Log. */ if (ata_id_has_devslp(dev->id)) { - u8 sata_setting[ATA_SECT_SIZE]; + u8 *sata_setting = ap->sector_buf; int i, j; dev->flags |= ATA_DFLAG_DEVSLP; @@ -2439,6 +2439,9 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); + if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48) + dev->max_sectors = ATA_MAX_SECTORS_LBA48; + if (ap->ops->dev_config) ap->ops->dev_config(dev); @@ -4100,6 +4103,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Weird ATAPI devices */ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA }, + { "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, /* Devices we expect to fail diagnostics */ diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 318b4135818..ff44787e5a4 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -532,8 +532,8 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) struct scsi_sense_hdr sshdr; scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sshdr); - if (sshdr.sense_key == 0 && - sshdr.asc == 0 && sshdr.ascq == 0) + if (sshdr.sense_key == RECOVERED_ERROR && + sshdr.asc == 0 && sshdr.ascq == 0x1d) cmd_result &= ~SAM_STAT_CHECK_CONDITION; } @@ -618,8 +618,8 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) struct scsi_sense_hdr sshdr; scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sshdr); - if (sshdr.sense_key == 0 && - sshdr.asc == 0 && sshdr.ascq == 0) + if (sshdr.sense_key == RECOVERED_ERROR && + sshdr.asc == 0 && sshdr.ascq == 0x1d) cmd_result &= ~SAM_STAT_CHECK_CONDITION; } diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index d34adef1e63..58cfb323242 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -943,7 +943,8 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg, unsigned int ival; int val_bytes = map->format.val_bytes; for (i = 0; i < val_len / val_bytes; i++) { - ival = map->format.parse_val(val + (i * val_bytes)); + memcpy(map->work_buf, val + (i * val_bytes), val_bytes); + ival = map->format.parse_val(map->work_buf); ret = regcache_write(map, reg + (i * map->reg_stride), ival); if (ret) { diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 2c127f9c3f3..dfe758382ea 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1051,29 +1051,12 @@ static int loop_clr_fd(struct loop_device *lo) lo->lo_state = Lo_unbound; /* This is safe: open() is still holding a reference. */ module_put(THIS_MODULE); + if (lo->lo_flags & LO_FLAGS_PARTSCAN && bdev) + ioctl |