diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/staging/comedi/Kconfig | 78 | ||||
| -rw-r--r-- | drivers/staging/comedi/drivers/Makefile | 4 |
2 files changed, 59 insertions, 23 deletions
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 8ce307e64b5..7ac097e2576 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -100,15 +100,6 @@ menuconfig COMEDI_ISA_DRIVERS if COMEDI_ISA_DRIVERS && ISA -config COMEDI_8255 - tristate "Generic 8255 support" - default N - ---help--- - Enable generic 8255 support. - - To compile this driver as a module, choose M here: the module will be - called 8255. - config COMEDI_ACL7225B tristate "ADlink NuDAQ ACL-7225b and compatibles support" default N @@ -130,6 +121,7 @@ config COMEDI_PCL711 config COMEDI_PCL724 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO" + select COMEDI_8255 default N ---help--- Enable support for Advantech PCL-724, PCL-722, PCL-731 and @@ -198,6 +190,7 @@ config COMEDI_PCL818 config COMEDI_PCM3724 tristate "Advantech PCM-3724 PC/104 card support" + select COMEDI_8255 default N ---help--- Enable support for Advantech PCM-3724 PC/104 cards. @@ -232,18 +225,9 @@ config COMEDI_RTI802 To compile this driver as a module, choose M here: the module will be called rti802. -config COMEDI_DAS08 - tristate "DAS-08 compatible ISA, PC/104 and PCMCIA card support" - default N - ---help--- - Enable support for Keithley Metrabyte/ComputerBoards DAS08 - and compatible ISA and PC/104 cards - - To compile this driver as a module, choose M here: the module will be - called das08. - config COMEDI_DAS16M1 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support" + select COMEDI_8255 select COMEDI_FC default N ---help--- @@ -254,6 +238,7 @@ config COMEDI_DAS16M1 config COMEDI_DAS16 tristate "DAS-16 compatible ISA and PC/104 card support" + select COMEDI_8255 select COMEDI_FC default N ---help--- @@ -385,6 +370,7 @@ config COMEDI_FL512 config COMEDI_AIO_AIO12_8 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support" + select COMEDI_8255 default N ---help--- Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board @@ -466,6 +452,7 @@ config COMEDI_NI_ATMIO config COMEDI_NI_ATMIO16D tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support" depends on ISAPNP && COMEDI_NI_COMMON + select COMEDI_8255 default N ---help--- Enable support for National Instruments AT-MIO16/AT-MIO16D cards. @@ -667,6 +654,7 @@ config COMEDI_ADDI_APCI_3XXX config COMEDI_ADL_PCI6208 tristate "ADLink PCI-6208A support" + select COMEDI_8255 default N ---help--- Enable support for ADLink PCI-6208A cards @@ -751,6 +739,7 @@ config COMEDI_ADV_PCI1723 config COMEDI_ADV_PCI_DIO tristate "Advantech PCI DIO card support" + select COMEDI_8255 default N ---help--- Enable support for Advantech PCI DIO cards @@ -762,6 +751,7 @@ config COMEDI_ADV_PCI_DIO config COMEDI_AMPLC_DIO200 tristate "Amplicon PC272E and PCI272 DIO board support" + select COMEDI_8255 default N ---help--- Enable support for Amplicon PC272E and PCI272 DIO boards @@ -771,6 +761,7 @@ config COMEDI_AMPLC_DIO200 config COMEDI_AMPLC_PC236 tristate "Amplicon PC36AT and PCI236 DIO board support" + select COMEDI_8255 default N ---help--- Enable support for Amplicon PC36AT and PCI236 DIO boards @@ -799,6 +790,7 @@ config COMEDI_AMPLC_PCI224 config COMEDI_AMPLC_PCI230 tristate "Amplicon PCI230 and PCI260 support" + select COMEDI_8255 default N ---help--- Enable support for Amplicon PCI230 and PCI260 Multifunction I/O @@ -869,6 +861,7 @@ config COMEDI_II_PCI20KC config COMEDI_DAQBOARD2000 tristate "IOtech DAQboard/2000 support" + select COMEDI_8255 default N ---help--- Enable support for the IOtech DAQboard/2000 @@ -896,6 +889,7 @@ config COMEDI_KE_COUNTER config COMEDI_CB_PCIDAS64 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support" + select COMEDI_8255 select COMEDI_FC default N ---help--- @@ -907,6 +901,7 @@ config COMEDI_CB_PCIDAS64 config COMEDI_CB_PCIDAS tristate "MeasurementComputing PCI-DAS support" + select COMEDI_8255 select COMEDI_FC default N ---help--- @@ -920,6 +915,7 @@ config COMEDI_CB_PCIDAS config COMEDI_CB_PCIDDA tristate "MeasurementComputing PCI-DDA series support" + select COMEDI_8255 default N ---help--- Enable support for ComputerBoards/MeasurementComputing PCI-DDA @@ -931,6 +927,7 @@ config COMEDI_CB_PCIDDA config COMEDI_CB_PCIDIO tristate "MeasurementComputing PCI-DIO series support" + select COMEDI_8255 default N ---help--- Enable support for ComputerBoards/MeasurementComputing PCI-DIO series @@ -941,6 +938,7 @@ config COMEDI_CB_PCIDIO config COMEDI_CB_PCIMDAS tristate "MeasurementComputing PCIM-DAS1602/16 support" + select COMEDI_8255 default N ---help--- Enable support for ComputerBoards/MeasurementComputing PCI Migration @@ -951,6 +949,7 @@ config COMEDI_CB_PCIMDAS config COMEDI_CB_PCIMDDA tristate "MeasurementComputing PCIM-DDA06-16 support" + select COMEDI_8255 default N ---help--- Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16 @@ -1026,6 +1025,7 @@ config COMEDI_NI_670X config COMEDI_NI_PCIDIO tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support" depends on COMEDI_MITE + select COMEDI_8255 default N ---help--- Enable support for National Instruments PCI-DIO-32HS, PXI-6533, @@ -1058,6 +1058,7 @@ config COMEDI_NI_PCIMIO config COMEDI_RTD520 tristate "Real Time Devices PCI4520/DM7520 support" + select COMEDI_8255 default N ---help--- Enable support for Real Time Devices PCI4520/DM7520 @@ -1097,7 +1098,7 @@ endif # COMEDI_PCI_DRIVERS menuconfig COMEDI_PCMCIA_DRIVERS tristate "Comedi PCMCIA drivers" - depends on COMEDI && PCMCIA && PCCARD + depends on COMEDI && (PCMCIA || PCCARD) default N ---help--- Enable comedi PCMCIA and PCCARD drivers to be built @@ -1142,6 +1143,7 @@ config COMEDI_NI_DAQ_700_CS config COMEDI_NI_DAQ_DIO24_CS tristate "NI DAQ-Card DIO-24 PCMCIA support" depends on COMEDI_NI_COMMON + select COMEDI_8255 default N ---help--- Enable support for the National Instruments PCMCIA DAQ-Card DIO-24 @@ -1162,8 +1164,8 @@ config COMEDI_NI_LABPC_CS config COMEDI_NI_MIO_CS tristate "NI DAQCard E series PCMCIA support" depends on COMEDI_NI_TIO && COMEDI_NI_COMMON - default N select COMEDI_FC + default N ---help--- Enable support for the National Instruments PCMCIA DAQCard E series DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E @@ -1265,6 +1267,7 @@ config COMEDI_MITE config COMEDI_NI_TIO tristate "NI general purpose counter support" + select COMEDI_8255 select COMEDI_MITE default N ---help--- @@ -1278,6 +1281,7 @@ config COMEDI_NI_TIO config COMEDI_NI_LABPC tristate "NI Lab-PC and compatibles ISA and PCI support" + select COMEDI_8255 select COMEDI_FC default N ---help--- @@ -1291,8 +1295,40 @@ config COMEDI_NI_LABPC endif # COMEDI_NI_COMMON +config COMEDI_8255 + tristate "Generic 8255 support" + depends on COMEDI + default N + ---help--- + Enable generic 8255 support. + + You should enable compilation this driver if you plan to use a board + that has an 8255 chip. For multifunction boards, the main driver will + configure the 8255 subdevice automatically. + + Note that most PCI 8255 boards do NOT work with this driver, and + need a separate driver as a wrapper. + + To compile this driver as a module, choose M here: the module will be + called 8255. + +config COMEDI_DAS08 + tristate "DAS-08 compatible support" + depends on COMEDI + select COMEDI_8255 + default N + ---help--- + Enable support for DAS08 and compatible ISA, PC/104 and PCI cards. + + Note that PCMCIA DAS08 cards are not directly supported by this + driver, and need a separate driver as a wrapper. + + To compile this driver as a module, choose M here: the module will be + called das08. + config COMEDI_FC tristate "Comedi shared functions for low-level driver support" + depends on COMEDI default N ---help--- Enable support for shared functions for low-level drivers. diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile index 5ccf246e252..354fb7d2984 100644 --- a/drivers/staging/comedi/drivers/Makefile +++ b/drivers/staging/comedi/drivers/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_COMEDI_SERIAL2002) += serial2002.o obj-$(CONFIG_COMEDI_SKEL) += skel.o # Comedi ISA drivers -obj-$(CONFIG_COMEDI_8255) += 8255.o obj-$(CONFIG_COMEDI_ACL7225B) += acl7225b.o obj-$(CONFIG_COMEDI_PCL711) += pcl711.o obj-$(CONFIG_COMEDI_PCL724) += pcl724.o @@ -26,7 +25,6 @@ obj-$(CONFIG_COMEDI_PCM3724) += pcm3724.o obj-$(CONFIG_COMEDI_PCM3730) += pcm3730.o obj-$(CONFIG_COMEDI_RTI800) += rti800.o obj-$(CONFIG_COMEDI_RTI802) += rti802.o -obj-$(CONFIG_COMEDI_DAS08) += das08.o obj-$(CONFIG_COMEDI_DAS16M1) += das16m1.o obj-$(CONFIG_COMEDI_DAS16) += das16.o obj-$(CONFIG_COMEDI_DAS800) += das800.o @@ -135,4 +133,6 @@ obj-$(CONFIG_COMEDI_NI_TIO) += ni_tio.o obj-$(CONFIG_COMEDI_NI_TIO) += ni_tiocmd.o obj-$(CONFIG_COMEDI_NI_LABPC) += ni_labpc.o +obj-$(CONFIG_COMEDI_8255) += 8255.o +obj-$(CONFIG_COMEDI_DAS08) += das08.o obj-$(CONFIG_COMEDI_FC) += comedi_fc.o |