diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/tty/serial/8250/8250.c | 11 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250.h | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 38 |
3 files changed, 50 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index d085e3a8ec0..f9320437a64 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -300,6 +300,12 @@ static const struct serial8250_config uart_config[] = { UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00, .flags = UART_CAP_FIFO, }, + [PORT_BRCM_TRUMANAGE] = { + .name = "TruManage", + .fifo_size = 1, + .tx_loadsz = 1024, + .flags = UART_CAP_HFIFO, + }, [PORT_8250_CIR] = { .name = "CIR port" } @@ -1490,6 +1496,11 @@ void serial8250_tx_chars(struct uart_8250_port *up) port->icount.tx++; if (uart_circ_empty(xmit)) break; + if (up->capabilities & UART_CAP_HFIFO) { + if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) != + BOTH_EMPTY) + break; + } } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 3b4ea84898c..12caa1292b7 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -40,6 +40,7 @@ struct serial8250_config { #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ #define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ +#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 8a2c3d93418..a27a98e1b06 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1085,6 +1085,18 @@ pci_omegapci_setup(struct serial_private *priv, return setup_port(priv, port, 2, idx * 8, 0); } +static int +pci_brcm_trumanage_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_8250_port *port, int idx) +{ + int ret = pci_default_setup(priv, board, port, idx); + + port->port.type = PORT_BRCM_TRUMANAGE; + port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + return ret; +} + static int skip_tx_en_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) @@ -1304,6 +1316,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020 #define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021 #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 +#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ @@ -1954,6 +1967,17 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .setup = pci_xr17v35x_setup, }, /* + * Broadcom TruManage (NetXtreme) + */ + { + .vendor = PCI_VENDOR_ID_BROADCOM, + .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_brcm_trumanage_setup, + }, + + /* * Default "match everything" terminator entry */ { @@ -2148,6 +2172,7 @@ enum pci_board_num_t { pbn_ce4100_1_115200, pbn_omegapci, pbn_NETMOS9900_2s_115200, + pbn_brcm_trumanage, }; /* @@ -2892,6 +2917,12 @@ static struct pciserial_board pci_boards[] = { .num_ports = 2, .base_baud = 115200, }, + [pbn_brcm_trumanage] = { + .flags = FL_BASE0, + .num_ports = 1, + .reg_shift = 2, + .base_baud = 115200, + }, }; static const struct pci_device_id blacklist[] = { @@ -4471,6 +4502,13 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_omegapci }, /* + * Broadcom TruManage + */ + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_brcm_trumanage }, + + /* * AgeStar as-prs2-009 */ { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375, |