diff options
Diffstat (limited to 'drivers')
53 files changed, 425 insertions, 99 deletions
diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c index 74e9cd81b5b..61f0146e215 100644 --- a/drivers/char/ds1620.c +++ b/drivers/char/ds1620.c @@ -43,52 +43,51 @@ static const char *fan_state[] = { "off", "on", "on (hardwired)" }; * chance that the WaveArtist driver could touch these bits to * enable or disable the speaker. */ -extern spinlock_t gpio_lock; extern unsigned int system_rev; static inline void netwinder_ds1620_set_clk(int clk) { - gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0); + nw_gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0); } static inline void netwinder_ds1620_set_data(int dat) { - gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0); + nw_gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0); } static inline int netwinder_ds1620_get_data(void) { - return gpio_read() & GPIO_DATA; + return nw_gpio_read() & GPIO_DATA; } static inline void netwinder_ds1620_set_data_dir(int dir) { - gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0); + nw_gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0); } static inline void netwinder_ds1620_reset(void) { - cpld_modify(CPLD_DS_ENABLE, 0); - cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE); + nw_cpld_modify(CPLD_DS_ENABLE, 0); + nw_cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE); } static inline void netwinder_lock(unsigned long *flags) { - spin_lock_irqsave(&gpio_lock, *flags); + spin_lock_irqsave(&nw_gpio_lock, *flags); } static inline void netwinder_unlock(unsigned long *flags) { - spin_unlock_irqrestore(&gpio_lock, *flags); + spin_unlock_irqrestore(&nw_gpio_lock, *flags); } static inline void netwinder_set_fan(int i) { unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); - gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0); + spin_unlock_irqrestore(&nw_gpio_lock, flags); } static inline int netwinder_get_fan(void) @@ -96,7 +95,7 @@ static inline int netwinder_get_fan(void) if ((system_rev & 0xf000) == 0x4000) return FAN_ALWAYS_ON; - return (gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF; + return (nw_gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF; } /* diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index 006be92ee3f..8c7df5ba088 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -58,8 +58,6 @@ static volatile unsigned char *FLASH_BASE; static int gbFlashSize = KFLASH_SIZE; static DEFINE_MUTEX(nwflash_mutex); -extern spinlock_t gpio_lock; - static int get_flash_id(void) { volatile unsigned int c1, c2; @@ -616,9 +614,9 @@ static void kick_open(void) * we want to write a bit pattern XXX1 to Xilinx to enable * the write gate, which will be open for about the next 2ms. */ - spin_lock_irqsave(&gpio_lock, flags); - cpld_modify(1, 1); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE); + spin_unlock_irqrestore(&nw_gpio_lock, flags); /* * let the ISA bus to catch on... diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 906f9b9d715..587f5b2380d 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1016,7 +1016,7 @@ static int i2c_pxa_probe(struct platform_device *dev) snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u", i2c->adap.nr); - i2c->clk = clk_get(&dev->dev, "I2CCLK"); + i2c->clk = clk_get(&dev->dev, NULL); if (IS_ERR(i2c->clk)) { ret = PTR_ERR(i2c->clk); goto eclk; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 1fac4e23313..fdebd930408 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -40,8 +40,8 @@ #include <asm/io.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c/regs-iic.h> -#include <asm/plat-s3c/iic.h> +#include <plat/regs-iic.h> +#include <plat/iic.h> /* i2c controller state */ diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e6857e01d1b..1a00bb7db87 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -724,7 +724,7 @@ config BLK_DEV_IDE_TX4939 config IDE_ARM tristate "ARM IDE support" - depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) + depends on ARM && (ARCH_RPC || ARCH_SHARK) default y config BLK_DEV_IDE_ICSIDE diff --git a/drivers/ide/ide_arm.c b/drivers/ide/ide_arm.c index f728f2927b5..bdcac94d7c1 100644 --- a/drivers/ide/ide_arm.c +++ b/drivers/ide/ide_arm.c @@ -15,15 +15,8 @@ #define DRV_NAME "ide_arm" -#ifdef CONFIG_ARCH_CLPS7500 -# include <mach/hardware.h> -# -# define IDE_ARM_IO (ISASLOT_IO + 0x1f0) -# define IDE_ARM_IRQ IRQ_ISA_14 -#else -# define IDE_ARM_IO 0x1f0 -# define IDE_ARM_IRQ IRQ_HARDDISK -#endif +#define IDE_ARM_IO 0x1f0 +#define IDE_ARM_IRQ IRQ_HARDDISK static int __init ide_arm_init(void) { diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 6d30c6d334c..0d2fc64a5e1 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -475,7 +475,7 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) goto failed_free_mem; } - keypad->clk = clk_get(&pdev->dev, "KBDCLK"); + keypad->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(keypad->clk)) { dev_err(&pdev->dev, "failed to get keypad clock\n"); error = PTR_ERR(keypad->clk); diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 27d70d326ff..da3c3a5d268 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -79,7 +79,7 @@ config SERIO_PARKBD config SERIO_RPCKBD tristate "Acorn RiscPC keyboard controller" - depends on ARCH_ACORN || ARCH_CLPS7500 + depends on ARCH_ACORN default y help Say Y here if you have the Acorn RiscPC and want to use an AT diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index ba648750a8d..1d11e2be9ef 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -31,7 +31,7 @@ #include <linux/interrupt.h> #include <linux/wm97xx.h> #include <linux/io.h> -#include <mach/pxa-regs.h> +#include <mach/regs-ac97.h> #define VERSION "0.13" diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index eb6be580292..70a77625107 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -39,6 +39,8 @@ #include <mach/pxa-regs.h> #include <mach/camera.h> +#include "pxa_camera.h" + #define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) #define PXA_CAM_DRV_NAME "pxa27x-camera" @@ -1071,7 +1073,7 @@ static int pxa_camera_probe(struct platform_device *pdev) goto exit; } - pcdev->clk = clk_get(&pdev->dev, "CAMCLK"); + pcdev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(pcdev->clk)) { err = PTR_ERR(pcdev->clk); goto exit_kfree; diff --git a/drivers/media/video/pxa_camera.h b/drivers/media/video/pxa_camera.h new file mode 100644 index 00000000000..89cbfc9a35c --- /dev/null +++ b/drivers/media/video/pxa_camera.h @@ -0,0 +1,95 @@ +/* Camera Interface */ +#define CICR0 __REG(0x50000000) +#define CICR1 __REG(0x50000004) +#define CICR2 __REG(0x50000008) +#define CICR3 __REG(0x5000000C) +#define CICR4 __REG(0x50000010) +#define CISR __REG(0x50000014) +#define CIFR __REG(0x50000018) +#define CITOR __REG(0x5000001C) +#define CIBR0 __REG(0x50000028) +#define CIBR1 __REG(0x50000030) +#define CIBR2 __REG(0x50000038) + +#define CICR0_DMAEN (1 << 31) /* DMA request enable */ +#define CICR0_PAR_EN (1 << 30) /* Parity enable */ +#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ +#define CICR0_ENB (1 << 28) /* Camera interface enable */ +#define CICR0_DIS (1 << 27) /* Camera interface disable */ +#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ +#define CICR0_TOM (1 << 9) /* Time-out mask */ +#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ +#define CICR0_FEM (1 << 7) /* FIFO-empty mask */ +#define CICR0_EOLM (1 << 6) /* End-of-line mask */ +#define CICR0_PERRM (1 << 5) /* Parity-error mask */ +#define CICR0_QDM (1 << 4) /* Quick-disable mask */ +#define CICR0_CDM (1 << 3) /* Disable-done mask */ +#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ +#define CICR0_EOFM (1 << 1) /* End-of-frame mask */ +#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ + +#define CICR1_TBIT (1 << 31) /* Transparency bit */ +#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */ +#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */ +#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ +#define CICR1_RGB_F (1 << 11) /* RGB format */ +#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ +#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ +#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ +#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ +#define CICR1_DW (0x7 << 0) /* Data width mask */ + +#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock + wait count mask */ +#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock + wait count mask */ +#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ +#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock + wait count mask */ +#define CICR2_FSW (0x7 << 0) /* Frame stabilization + wait count mask */ + +#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock + wait count mask */ +#define CICR3_EFW (0xff << 16) /* End-of-frame line clock + wait count mask */ +#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ +#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock + wait count mask */ +#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */ + +#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ +#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ +#define CICR4_PCP (1 << 22) /* Pixel clock polarity */ +#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ +#define CICR4_VSP (1 << 20) /* Vertical sync polarity */ +#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ +#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ +#define CICR4_DIV (0xff << 0) /* Clock divisor mask */ + +#define CISR_FTO (1 << 15) /* FIFO time-out */ +#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ +#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ +#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ +#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ +#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ +#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ +#define CISR_EOL (1 << 8) /* End of line */ +#define CISR_PAR_ERR (1 << 7) /* Parity error */ +#define CISR_CQD (1 << 6) /* Camera interface quick disable */ +#define CISR_CDD (1 << 5) /* Camera interface disable done */ +#define CISR_SOF (1 << 4) /* Start of frame */ +#define CISR_EOF (1 << 3) /* End of frame */ +#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ +#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ +#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ + +#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ +#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ +#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ +#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ +#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ +#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ +#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ +#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ + diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index e4c0db4dc7b..9e485459f63 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -474,9 +474,9 @@ static __init int asic3_gpio_probe(struct platform_device *pdev, u16 dir_reg[ASIC3_NUM_GPIO_BANKS]; int i; - memzero(alt_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); - memzero(out_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); - memzero(dir_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); /* Enable all GPIOs */ asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff); diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index b4ed57e0272..6063dc2b52e 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -18,7 +18,7 @@ #include <linux/slab.h> #include <linux/string.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <asm/system.h> #include "mcp.h" diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 28380b20bc7..62b32dabf62 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -20,7 +20,7 @@ #include <linux/slab.h> #include <linux/platform_device.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/system.h> diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c index 61aeaf79640..86fed4870f9 100644 --- a/drivers/mfd/ucb1x00-assabet.c +++ b/drivers/mfd/ucb1x00-assabet.c @@ -15,7 +15,7 @@ #include <linux/proc_fs.h> #include <linux/device.h> -#include <asm/dma.h> +#include <mach/dma.h> #include "ucb1x00.h" diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index a316f1b7593..6860c924f36 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -25,7 +25,7 @@ #include <linux/device.h> #include <linux/mutex.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/hardware.h> #include "ucb1x00.h" diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index 44762ca86a8..61b7d3eb9a2 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -31,7 +31,7 @@ #include <linux/slab.h> #include <linux/kthread.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/collie.h> #include <asm/mach-types.h> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2fadf323c69..1bcbdd6763a 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -500,7 +500,7 @@ static int mmci_probe(struct amba_device *dev, void *id) } host = mmc_priv(mmc); - host->clk = clk_get(&dev->dev, "MCLK"); + host->clk = clk_get(&dev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); host->clk = NULL; diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index ebfaa996093..f88cc740635 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -26,11 +26,12 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/mmc/host.h> +#include <linux/io.h> -#include <asm/dma.h> -#include <asm/io.h> #include <asm/sizes.h> +#include <mach/dma.h> +#include <mach/hardware.h> #include <mach/pxa-regs.h> #include <mach/mmc.h> @@ -533,7 +534,7 @@ static int pxamci_probe(struct platform_device *pdev) host->pdata = pdev->dev.platform_data; host->clkrt = CLKRT_OFF; - host->clk = clk_get(&pdev->dev, "MMCCLK"); + host->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); host->clk = NULL; diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 3b2085b5776..fcc98a4cce3 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -25,7 +25,7 @@ #include <mach/regs-sdi.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/mci.h> +#include <plat/mci.h> #include "s3cmci.h" diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c index 3aa018c092f..42969fe051b 100644 --- a/drivers/mtd/maps/dc21285.c +++ b/drivers/mtd/maps/dc21285.c @@ -32,16 +32,15 @@ static struct mtd_info *dc21285_mtd; */ static void nw_en_write(void) { - extern spinlock_t gpio_lock; unsigned long flags; /* * we want to write a bit pattern XXX1 to Xilinx to enable * the write gate, which will be open for about the next 2ms. */ - spin_lock_irqsave(&gpio_lock, flags); - cpld_modify(1, 1); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE); + spin_unlock_irqrestore(&nw_gpio_lock, flags); /* * let the ISA bus to catch on... diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c index dcdb1f17577..3ea1de9be72 100644 --- a/drivers/mtd/maps/ixp2000.c +++ b/drivers/mtd/maps/ixp2000.c @@ -170,7 +170,7 @@ static int ixp2000_flash_probe(struct platform_device *dev) err = -ENOMEM; goto Error; } - memzero(info, sizeof(struct ixp2000_flash_info)); + memset(info, 0, sizeof(struct ixp2000_flash_info)); platform_set_drvdata(dev, info); diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index 9c7a5fbd4e5..16555cbeaea 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -201,7 +201,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev) err = -ENOMEM; goto Error; } - memzero(info, sizeof(struct ixp4xx_flash_info)); + memset(info, 0, sizeof(struct ixp4xx_flash_info)); platform_set_drvdata(dev, info); diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 15f0a26730a..fc414449561 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -20,8 +20,8 @@ #include <linux/mtd/partitions.h> #include <linux/io.h> #include <linux/irq.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/pxa-regs.h> #include <mach/pxa3xx_nand.h> @@ -1080,7 +1080,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) this = &info->nand_chip; mtd->priv = info; - info->clk = clk_get(&pdev->dev, "NANDCLK"); + info->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(info->clk)) { dev_err(&pdev->dev, "failed to get nand clock\n"); ret = PTR_ERR(info->clk); diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 556139ed1fd..8e375d5fe23 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -45,8 +45,8 @@ #include <asm/io.h> -#include <asm/plat-s3c/regs-nand.h> -#include <asm/plat-s3c/nand.h> +#include <plat/regs-nand.h> +#include <plat/nand.h> #ifdef CONFIG_MTD_NAND_S3C2410_HWECC static int hardware_ecc = 1; @@ -818,7 +818,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, goto exit_error; } - memzero(info, sizeof(*info)); + memset(info, 0, sizeof(*info)); platform_set_drvdata(pdev, info); spin_lock_init(&info->controller.lock); @@ -883,7 +883,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, goto exit_error; } - memzero(info->mtds, size); + memset(info->mtds, 0, size); /* initialise all possible chips */ diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 7107620f615..0b729f7d91f 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -170,11 +170,7 @@ static char version[] __initdata = /* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps them to system IRQ numbers. This mapping is card specific and is set to the configuration of the Cirrus Eval board for this chip. */ -#ifdef CONFIG_ARCH_CLPS7500 -static unsigned int netcard_portlist[] __used __initdata = - { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; -static unsigned int cs8900_irq_map[] = {12,0,0,0}; -#elif defined(CONFIG_SH_HICOSH4) +#if defined(CONFIG_SH_HICOSH4) static unsigned int netcard_portlist[] __used __initdata = { 0x0300, 0}; static unsigned int cs8900_irq_map[] = {1,0,0,0}; diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index c5b02b66f75..0e081292f4f 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -22,9 +22,53 @@ #include <net/irda/wrapper.h> #include <net/irda/irda_device.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/irda.h> +#include <mach/hardware.h> #include <mach/pxa-regs.h> +#include <mach/regs-uart.h> + +#define FICP __REG(0x40800000) /* Start of FICP area */ +#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ +#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ +#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ +#define ICDR __REG(0x4080000c) /* ICP Data Register */ +#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ +#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ + +#define ICCR0_AME (1 << 7) /* Address match enable */ +#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ +#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ +#define ICCR0_RXE (1 << 4) /* Receive enable */ +#define ICCR0_TXE (1 << 3) /* Transmit enable */ +#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ +#define ICCR0_LBM (1 << 1) /* Loopback mode */ +#define ICCR0_ITR (1 << 0) /* IrDA transmission */ + +#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ +#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ +#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ +#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ +#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ +#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ + +#ifdef CONFIG_PXA27x +#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ +#endif +#define ICSR0_FRE (1 << 5) /* Framing error */ +#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */ +#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */ +#define ICSR0_RAB (1 << 2) /* Receiver abort */ +#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */ +#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */ + +#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */ +#define ICSR1_CRE (1 << 5) /* CRC error */ +#define ICSR1_EOF (1 << 4) /* End of frame */ +#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */ +#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */ +#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */ +#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */ #define IrSR_RXPL_NEG_IS_ZERO (1<<4) #define IrSR_RXPL_POS_IS_ZERO 0x0 diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index a95188948de..0813b5295f5 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -36,7 +36,7 @@ #include <net/irda/irda_device.h> #include <asm/irq.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/hardware.h> #include <asm/mach/irda.h> diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h index cc7d85bdfb3..870b4c33f10 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/smc911x.h @@ -200,6 +200,9 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg, #ifdef SMC_USE_PXA_DMA + +#include <mach/dma.h> + /* * Define the request and free functions * These are unfortunately architecture specific as no generic allocation diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index a07cc9351c6..37e2cb4f4f8 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -527,7 +527,8 @@ struct smc_local { * as RX which can overrun memory and lose packets. */ #include <linux/dma-mapping.h> -#include <asm/dma.h> +#include <mach/dma.h> +#include <mach/hardware.h> #include <mach/pxa-regs.h> #ifdef SMC_insl diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 222904411a1..27647354398 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -217,7 +217,7 @@ config PCMCIA_PXA2XX depends on ARM && ARCH_PXA && PCMCIA depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ - || ARCH_VIPER) + || ARCH_VIPER || ARCH_PXA_ESERIES) help Say Y here to include support for the PXA2xx PCMCIA controller diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 238629ad7f7..bbac4632722 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -72,5 +72,6 @@ pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o +pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o $(pxa2xx-obj-y) diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c new file mode 100644 index 00000000000..f663a011bf4 --- /dev/null +++ b/drivers/pcmcia/pxa2xx_e740.c @@ -0,0 +1,176 @@ +/* + * Toshiba e740 PCMCIA specific routines. + * + * (c) 2004 Ian Molton <spyro@f2s.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <mach/hardware.h> +#include <mach/pxa-regs.h> +#include <mach/eseries-gpio.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include "soc_common.h" + +static struct pcmcia_irqs cd_irqs[] = { + { + .sock = 0, + .irq = IRQ_GPIO(GPIO_E740_PCMCIA_CD0), + .str = "CF card detect" + }, + { + .sock = 1, + .irq = IRQ_GPIO(GPIO_E740_PCMCIA_CD1), + .str = "Wifi switch" + }, +}; + +static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + skt->irq = skt->nr == 0 ? IRQ_GPIO(GPIO_E740_PCMCIA_RDY0) : + IRQ_GPIO(GPIO_E740_PCMCIA_RDY1); + + return soc_pcmcia_request_irqs(skt, &cd_irqs[skt->nr], 1); +} + +/* + * Release all resources. + */ +static void e740_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_free_irqs(skt, &cd_irqs[skt->nr], 1); +} + +static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + if (skt->nr == 0) { + state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD0) ? 0 : 1; + state->ready = gpio_get_value(GPIO_E740_PCMCIA_RDY0) ? 1 : 0; + } else { + state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD1) ? 0 : 1; + state->ready = gpio_get_value(GPIO_E740_PCMCIA_RDY1) ? 1 : 0; + } + + state->vs_3v = 1; + state->bvd1 = 1; + state->bvd2 = 1; + state->wrprot = 0; + state->vs_Xv = 0; +} + +static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + if (state->flags & SS_RESET) { + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_RST0, 1); + else + gpio_set_value(GPIO_E740_PCMCIA_RST1, 1); + } else { + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_RST0, 0); + else + gpio_set_value(GPIO_E740_PCMCIA_RST1, 0); + } + + switch (state->Vcc) { + case 0: /* Socket off */ + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0); + else + gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1); + break; + case 50: + case 33: /* socket on */ + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1); + else + gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0); + break; + default: + printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc); + } + + return 0; +} + +/* + * Enable card status IRQs on (re-)initialisation. This can + * be called at initialisation, power management event, or + * pcmcia event. + */ +static void e740_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_enable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs)); +} + +/* + * Disable card status IRQs on suspend. + */ +static void e740_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_disable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs)); +} + +static struct pcmcia_low_level e740_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = e740_pcmcia_hw_init, + .hw_shutdown = e740_pcmcia_hw_shutdown, + .socket_state = e740_pcmcia_socket_state, + .configure_socket = e740_pcmcia_configure_socket, + .socket_init = e740_pcmcia_socket_init, + .socket_suspend = e740_pcmcia_socket_suspend, + .nr = 2, +}; + +static struct platform_device *e740_pcmcia_device; + +static int __init e740_pcmcia_init(void) +{ + int ret; + + if (!machine_is_e740()) + return -ENODEV; + + e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!e740_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops, + sizeof(e740_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(e740_pcmcia_device); + + if (ret) + platform_device_put(e740_pcmcia_device); + + return ret; +} + +static void __exit e740_pcmcia_exit(void) +{ + platform_device_unregister(e740_pcmcia_device); +} + +module_init(e740_pcmcia_init); +module_exit(e740_pcmcia_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_DESCRIPTION("e740 PCMCIA platform support"); diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 2133f37906f..d5e4e637dde 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -21,6 +21,7 @@ #include <mach/board.h> #include <mach/at91_rtt.h> +#include <mach/cpu.h> /* diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index f59277bbeda..7a568beba3f 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -26,7 +26,7 @@ #include <asm/uaccess.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/plat-s3c/regs-rtc.h> +#include <plat/regs-rtc.h> /* I have yet to find an S3C implementation with more than one * of these rtc blocks in */ diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 71562689116..e3a5ad5ef1d 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -692,7 +692,7 @@ static int pl010_probe(struct amba_device *dev, void *id) goto free; } - uap->clk = clk_get(&dev->dev, "UARTCLK"); + uap->clk = clk_get(&dev->dev, NULL); if (IS_ERR(uap->clk)) { ret = PTR_ERR(uap->clk); goto unmap; diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index b7180046f8d..8b2b9700f3e 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -756,7 +756,7 @@ static int pl011_probe(struct amba_device *dev, void *id) goto free; } - uap->clk = clk_get(&dev->dev, "UARTCLK"); + uap->clk = clk_get(&dev->dev, NULL); if (IS_ERR(uap->clk)) { ret = PTR_ERR(uap->clk); goto unmap; diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index abc00be5543..f6e3b86bb0b 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -48,6 +48,7 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <mach/pxa-regs.h> +#include <mach/regs-uart.h> struct uart_pxa_port { @@ -766,7 +767,7 @@ static int serial_pxa_probe(struct platform_device *dev) if (!sport) return -ENOMEM; - sport->clk = clk_get(&dev->dev, "UARTCLK"); + sport->clk = clk_get(&dev->dev, NULL); if (IS_ERR(sport->clk)) { ret = PTR_ERR(sport->clk); goto err_free; diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c index 61dc8b3daa2..a7bf024a828 100644 --- a/drivers/serial/serial_lh7a40x.c +++ b/drivers/serial/serial_lh7a40x.c @@ -41,9 +41,10 @@ #include <linux/tty_flip.h> #include <linux/serial_core.h> #include <linux/serial.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/irq.h> +#include <mach/hardware.h> #define DEV_MAJOR 204 #define DEV_MINOR 16 diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index cf12f2d84be..6104f461a3c 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -32,8 +32,8 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/delay.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/hardware.h> #include <mach/pxa-regs.h> #include <mach/regs-ssp.h> diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index c252cbac00f..256d18395a2 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -28,7 +28,7 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/regs-spi.h> +#include <plat/regs-spi.h> #include <mach/spi.h> struct s3c24xx_spi { diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 2dbc0db0b46..8c5026be79d 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -2145,7 +2145,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) if (irq < 0) return -ENODEV; - dev->clk = clk_get(&pdev->dev, "UDCCLK"); + dev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) { retval = PTR_ERR(dev->clk); goto err_clk; diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index caa37c95802..944e4ff641d 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -2226,7 +2226,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) udc->dev = &pdev->dev; udc->mach = pdev->dev.platform_data; - udc->clk = clk_get(&pdev->dev, "UDCCLK"); + udc->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(udc->clk)) { retval = PTR_ERR(udc->clk); goto err_clk; diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 00ba06b4475..8d8d6516598 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -53,8 +53,8 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/regs-udc.h> -#include <asm/plat-s3c24xx/udc.h> +#include <plat/regs-udc.h> +#include <plat/udc.h> #include "s3c2410_udc.h" diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 5416cf96900..9d487908012 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -33,8 +33,9 @@ /* * Implement Orion USB controller specification guidelines */ -static void orion_usb_setup(struct usb_hcd *hcd) +static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) { + /* The below GLs are according to the Orion Errata document */ /* * Clear interrupt cause and mask */ @@ -258,9 +259,19 @@ static int __init ehci_orion_drv_probe(struct platform_device *pdev) ehci_orion_conf_mbus_windows(hcd, pd->dram); /* - * setup Orion USB controller + * setup Orion USB controller. */ - orion_usb_setup(hcd); + switch (pd->phy_version) { + case EHCI_PHY_NA: /* dont change USB phy settings */ + break; + case EHCI_PHY_ORION: + orion_usb_phy_v1_setup(hcd); + break; + case EHCI_PHY_DD: + case EHCI_PHY_KW: + default: + printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n"); + } err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED); if (err) diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index e294d430733..e44dc2cbca2 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -296,7 +296,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device return -ENXIO; } - usb_clk = clk_get(&pdev->dev, "USBCLK"); + usb_clk = clk_get(&pdev->dev, NULL); if (IS_ERR(usb_clk)) return PTR_ERR(usb_clk); diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 3f3ce13fef4..23730184907 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -362,7 +362,7 @@ endchoice config FB_ACORN bool "Acorn VIDC support" - depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) + depends on (FB = y) && ARM && ARCH_ACORN select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index a7a1c891bfa..2ac52fd8cc1 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -343,14 +343,14 @@ static int clcdfb_register(struct clcd_fb *fb) { int ret; - fb->clk = clk_get(&fb->dev->dev, "CLCDCLK"); + fb->clk = clk_get(&fb->dev->dev, NULL); if (IS_ERR(fb->clk)) { ret = PTR_ERR(fb->clk); goto out; } fb->fb.fix.mmio_start = fb->dev->res.start; - fb->fb.fix.mmio_len = SZ_4K; + fb->fb.fix.mmio_len = 4096; fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len); if (!fb->regs) { diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index cc59c52e110..afe7a65c560 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -69,9 +69,6 @@ #define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP | LCCR3_VSP |\ LCCR3_PCD | LCCR3_BPP) -static void (*pxafb_backlight_power)(int); -static void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); - static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *); static void set_ctrlr_state(struct pxafb_info *fbi, u_int state); @@ -814,6 +811,7 @@ static int pxafb_smart_init(struct pxafb_info *fbi) __func__); return PTR_ERR(fbi->smart_thread); } + return 0; } #else @@ -976,16 +974,16 @@ static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on) { pr_debug("pxafb: backlight o%s\n", on ? "n" : "ff"); - if (pxafb_backlight_power) - pxafb_backlight_power(on); + if (fbi->backlight_power) + fbi->backlight_power(on); } static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on) { pr_debug("pxafb: LCD power o%s\n", on ? "n" : "ff"); - if (pxafb_lcd_power) - pxafb_lcd_power(on, &fbi->fb.var); + if (fbi->lcd_power) + fbi->lcd_power(on, &fbi->fb.var); } static void pxafb_setup_gpio(struct pxafb_info *fbi) @@ -1429,7 +1427,7 @@ static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev) memset(fbi, 0, sizeof(struct pxafb_info)); fbi->dev = dev; - fbi->clk = clk_get(dev, "LCDCLK"); + fbi->clk = clk_get(dev, NULL); if (IS_ERR(fbi->clk)) { kfree(fbi); return NULL; @@ -1748,8 +1746,7 @@ static int __devinit pxafb_probe(struct platform_device *dev) ret = -EINVAL; goto failed; } - pxafb_backlight_power = inf->pxafb_backlight_power; - pxafb_lcd_power = inf->pxafb_lcd_power; + fbi = pxafb_init_fbinfo(&dev->dev); if (!fbi) { /* only reason for pxafb_init_fbinfo to fail is kmalloc */ @@ -1758,6 +1755,9 @@ static int __devinit pxafb_probe(struct platform_device *dev) goto failed; } + fbi->backlight_power = inf->pxafb_backlight_power; + fbi->lcd_power = inf->pxafb_lcd_power; + r = platform_get_resource(dev, IORESOURCE_MEM, 0); if (r == NULL) { dev_err(&dev->dev, "no I/O memory resource defined\n"); diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h index 31541b86f13..d8eb93fa03a 100644 --- a/drivers/video/pxafb.h +++ b/drivers/video/pxafb.h @@ -124,6 +124,9 @@ struct pxafb_info { struct notifier_block freq_transition; struct notifier_block freq_policy; #endif + + void (*lcd_power)(int, struct fb_var_screeninfo *); + void (*backlight_power)(int); }; #define TO_INF(ptr,member) container_of(ptr,struct pxafb_info,member) diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index c052bd4c0b0..076f946fa0f 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -114,7 +114,7 @@ * - convert dma address types to dma_addr_t * - remove unused 'montype' stuff * - remove redundant zero inits of init_var after the initial - * memzero. + * memset. * - remove allow_modeset (acornfb idea does not belong here) * * 2001/05/28: <rmk@arm.linux.org.uk> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index f7f6ce82a5e..e31925ee834 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -42,7 +42,7 @@ #undef S3C_VA_WATCHDOG #define S3C_VA_WATCHDOG (0) -#include <asm/plat-s3c/regs-watchdog.h> +#include <plat/regs-watchdog.h> #define PFX "s3c2410-wdt: " diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index ed01e4c2bef..d6fbb465721 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -27,6 +27,7 @@ #include <linux/init.h> #include <linux/bitops.h> #include <linux/uaccess.h> +#include <linux/timex.h> #ifdef CONFIG_ARCH_PXA #include <mach/pxa-regs.h> |