diff options
Diffstat (limited to 'drivers')
97 files changed, 5547 insertions, 4594 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index e7da9fa724e..050323fd79e 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -80,6 +80,8 @@ source "drivers/rtc/Kconfig" source "drivers/dma/Kconfig" +source "drivers/auxdisplay/Kconfig" + source "drivers/kvm/Kconfig" endmenu diff --git a/drivers/Makefile b/drivers/Makefile index f28dcb4ec8b..3a718f51350 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_ATA) += ata/ obj-$(CONFIG_FUSION) += message/ obj-$(CONFIG_IEEE1394) += ieee1394/ obj-y += cdrom/ +obj-y += auxdisplay/ obj-$(CONFIG_MTD) += mtd/ obj-$(CONFIG_SPI) += spi/ obj-$(CONFIG_PCCARD) += pcmcia/ diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c index 5aab7bd473a..8fccf018f16 100644 --- a/drivers/atm/eni.c +++ b/drivers/atm/eni.c @@ -912,7 +912,6 @@ static int start_rx(struct atm_dev *dev) free_page((unsigned long) eni_dev->free_list); return -ENOMEM; } - memset(eni_dev->rx_map,0,PAGE_SIZE); eni_dev->rx_mult = DEFAULT_RX_MULT; eni_dev->fast = eni_dev->last_fast = NULL; eni_dev->slow = eni_dev->last_slow = NULL; diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig new file mode 100644 index 00000000000..0300e7f54cc --- /dev/null +++ b/drivers/auxdisplay/Kconfig @@ -0,0 +1,109 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# +# Auxiliary display drivers configuration. +# + +menu "Auxiliary Display support" + +config KS0108 + tristate "KS0108 LCD Controller" + depends on PARPORT_PC + default n + ---help--- + If you have a LCD controlled by one or more KS0108 + controllers, say Y. You will need also another more specific + driver for your LCD. + + Depends on Parallel Port support. If you say Y at + parport, you will be able to compile this as a module (M) + and built-in as well (Y). + + To compile this as a module, choose M here: + the module will be called ks0108. + + If unsure, say N. + +config KS0108_PORT + hex "Parallel port where the LCD is connected" + depends on KS0108 + default 0x378 + ---help--- + The address of the parallel port where the LCD is connected. + + The first standard parallel port address is 0x378. + The second standard parallel port address is 0x278. + The third standard parallel port address is 0x3BC. + + You can specify a different address if you need. + + If you don't know what I'm talking about, load the parport module, + and execute "dmesg" or "cat /proc/ioports". You can see there how + many parallel ports are present and which address each one has. + + Usually you only need to use 0x378. + + If you compile this as a module, you can still override this + using the module parameters. + +config KS0108_DELAY + int "Delay between each control writing (microseconds)" + depends on KS0108 + default "2" + ---help--- + Amount of time the ks0108 should wait between each control write + to the parallel port. + + If your driver seems to miss random writings, increment this. + + If you don't know what I'm talking about, ignore it. + + If you compile this as a module, you can still override this + value using the module parameters. + +config CFAG12864B + tristate "CFAG12864B LCD" + depends on X86 + depends on FB + depends on KS0108 + default n + ---help--- + If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series, + say Y. You also need the ks0108 LCD Controller driver. + + For help about how to wire your LCD to the parallel port, + check Documentation/auxdisplay/cfag12864b + + Depends on the x86 arch and the framebuffer support. + + The LCD framebuffer driver can be attached to a console. + It will work fine. However, you can't attach it to the fbdev driver + of the xorg server. + + To compile this as a module, choose M here: + the modules will be called cfag12864b and cfag12864bfb. + + If unsure, say N. + +config CFAG12864B_RATE + int "Refresh rate (hertz)" + depends on CFAG12864B + default "20" + ---help--- + Refresh rate of the LCD. + + As the LCD is not memory mapped, the driver has to make the work by + software. This means you should be careful setting this value higher. + If your CPUs are really slow or you feel the system is slowed down, + decrease the value. + + Be careful modifying this value to a very high value: + You can freeze the computer, or the LCD maybe can't draw as fast as you + are requesting. + + If you don't know what I'm talking about, ignore it. + + If you compile this as a module, you can still override this + value using the module parameters. +endmenu diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile new file mode 100644 index 00000000000..8a8936a468b --- /dev/null +++ b/drivers/auxdisplay/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the kernel auxiliary displays device drivers. +# + +obj-$(CONFIG_KS0108) += ks0108.o +obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c new file mode 100644 index 00000000000..889583dfc1a --- /dev/null +++ b/drivers/auxdisplay/cfag12864b.c @@ -0,0 +1,383 @@ +/* + * Filename: cfag12864b.c + * Version: 0.1.0 + * Description: cfag12864b LCD driver + * License: GPLv2 + * Depends: ks0108 + * + * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com> + * Date: 2006-10-31 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/cdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <linux/vmalloc.h> +#include <linux/workqueue.h> +#include <linux/ks0108.h> +#include <linux/cfag12864b.h> + + +#define CFAG12864B_NAME "cfag12864b" + +/* + * Module Parameters + */ + +static unsigned int cfag12864b_rate = CONFIG_CFAG12864B_RATE; +module_param(cfag12864b_rate, uint, S_IRUGO); +MODULE_PARM_DESC(cfag12864b_rate, + "Refresh rate (hertzs)"); + +unsigned int cfag12864b_getrate(void) +{ + return cfag12864b_rate; +} + +/* + * cfag12864b Commands + * + * E = Enable signal + * Everytime E switch from low to high, + * cfag12864b/ks0108 reads the command/data. + * + * CS1 = First ks0108controller. + * If high, the first ks0108 controller receives commands/data. + * + * CS2 = Second ks0108 controller + * If high, the second ks0108 controller receives commands/data. + * + * DI = Data/Instruction + * If low, cfag12864b will expect commands. + * If high, cfag12864b will expect data. + * + */ + +#define bit(n) (((unsigned char)1)<<(n)) + +#define CFAG12864B_BIT_E (0) +#define CFAG12864B_BIT_CS1 (2) +#define CFAG12864B_BIT_CS2 (1) +#define CFAG12864B_BIT_DI (3) + +static unsigned char cfag12864b_state; + +static void cfag12864b_set(void) +{ + ks0108_writecontrol(cfag12864b_state); +} + +static void cfag12864b_setbit(unsigned char state, unsigned char n) +{ + if (state) + cfag12864b_state |= bit(n); + else + cfag12864b_state &= ~bit(n); +} + +static void cfag12864b_e(unsigned char state) +{ + cfag12864b_setbit(state, CFAG12864B_BIT_E); + cfag12864b_set(); +} + +static void cfag12864b_cs1(unsigned char state) +{ + cfag12864b_setbit(state, CFAG12864B_BIT_CS1); |