diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mfd/asic3.c | 114 |
1 files changed, 113 insertions, 1 deletions
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index a90658e8630..63a2a663210 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -27,6 +27,7 @@ #include <linux/mfd/asic3.h> #include <linux/mfd/core.h> #include <linux/mfd/ds1wm.h> +#include <linux/mfd/tmio.h> enum { ASIC3_CLOCK_SPI, @@ -684,11 +685,106 @@ static struct mfd_cell asic3_cell_ds1wm = { .resources = ds1wm_resources, }; +static struct tmio_mmc_data asic3_mmc_data = { + .hclk = 24576000, +}; + +static struct resource asic3_mmc_resources[] = { + { + .start = ASIC3_SD_CTRL_BASE, + .end = ASIC3_SD_CTRL_BASE + 0x3ff, + .flags = IORESOURCE_MEM, + }, + { + .start = ASIC3_SD_CONFIG_BASE, + .end = ASIC3_SD_CONFIG_BASE + 0x1ff, + .flags = IORESOURCE_MEM, + }, + { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +static int asic3_mmc_enable(struct platform_device *pdev) +{ + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); + + /* Not sure if it must be done bit by bit, but leaving as-is */ + asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), + ASIC3_SDHWCTRL_LEVCD, 1); + asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), + ASIC3_SDHWCTRL_LEVWP, 1); + asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), + ASIC3_SDHWCTRL_SUSPEND, 0); + asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), + ASIC3_SDHWCTRL_PCLR, 0); + + asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]); + /* CLK32 used for card detection and for interruption detection + * when HCLK is stopped. + */ + asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]); + msleep(1); + + /* HCLK 24.576 MHz, BCLK 12.288 MHz: */ + asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), + CLOCK_SEL_CX | CLOCK_SEL_SD_HCLK_SEL); + + asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]); + asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]); + msleep(1); + + asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT), + ASIC3_EXTCF_SD_MEM_ENABLE, 1); + + /* Enable SD card slot 3.3V power supply */ + asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), + ASIC3_SDHWCTRL_SDPWR, 1); + + return 0; +} + +static int asic3_mmc_disable(struct platform_device *pdev) +{ + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); + + /* Put in suspend mode */ + asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), + ASIC3_SDHWCTRL_SUSPEND, 1); + + /* Disable clocks */ + asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]); + asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]); + asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]); + asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]); + return 0; +} + +static struct mfd_cell asic3_cell_mmc = { + .name = "tmio-mmc", + .enable = asic3_mmc_enable, + .disable = asic3_mmc_disable, + .driver_data = &asic3_mmc_data, + .num_resources = ARRAY_SIZE(asic3_mmc_resources), + .resources = asic3_mmc_resources, +}; + static int __init asic3_mfd_probe(struct platform_device *pdev, struct resource *mem) { struct asic3 *asic = platform_get_drvdata(pdev); - int ret; + struct resource *mem_sdio; + int irq, ret; + + mem_sdio = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!mem_sdio) + dev_dbg(asic->dev, "no SDIO MEM resource\n"); + + irq = platform_get_irq(pdev, 1); + if (irq < 0) + dev_dbg(asic->dev, "no SDIO IRQ resource\n"); /* DS1WM */ asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT), @@ -700,9 +796,25 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, asic3_cell_ds1wm.platform_data = &asic3_cell_ds1wm; asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm); + /* MMC */ + asic3_mmc_resources[0].start >>= asic->bus_shift; + asic3_mmc_resources[0].end >>= asic->bus_shift; + asic3_mmc_resources[1].start >>= asic->bus_shift; + asic3_mmc_resources[1].end >>= asic->bus_shift; + + asic3_cell_mmc.platform_data = &asic3_cell_mmc; + asic3_cell_mmc.data_size = sizeof(asic3_cell_mmc); + ret = mfd_add_devices(&pdev->dev, pdev->id, &asic3_cell_ds1wm, 1, mem, asic->irq_base); + if (ret < 0) + goto out; + + if (mem_sdio && (irq >= 0)) + ret = mfd_add_devices(&pdev->dev, pdev->id, + &asic3_cell_mmc, 1, mem_sdio, irq); + out: return ret; } |