diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/edac/i82860_edac.c | 299 | ||||
| -rw-r--r-- | drivers/edac/i82875p_edac.c | 532 |
2 files changed, 831 insertions, 0 deletions
diff --git a/drivers/edac/i82860_edac.c b/drivers/edac/i82860_edac.c new file mode 100644 index 00000000000..bfb7ae02e37 --- /dev/null +++ b/drivers/edac/i82860_edac.c @@ -0,0 +1,299 @@ +/* + * Intel 82860 Memory Controller kernel module + * (C) 2005 Red Hat (http://www.redhat.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Ben Woodard <woodard@redhat.com> + * shamelessly copied from and based upon the edac_i82875 driver + * by Thayne Harbaugh of Linux Networx. (http://lnxi.com) + */ + + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include "edac_mc.h" + + +#ifndef PCI_DEVICE_ID_INTEL_82860_0 +#define PCI_DEVICE_ID_INTEL_82860_0 0x2531 +#endif /* PCI_DEVICE_ID_INTEL_82860_0 */ + +#define I82860_MCHCFG 0x50 +#define I82860_GBA 0x60 +#define I82860_GBA_MASK 0x7FF +#define I82860_GBA_SHIFT 24 +#define I82860_ERRSTS 0xC8 +#define I82860_EAP 0xE4 +#define I82860_DERRCTL_STS 0xE2 + +enum i82860_chips { + I82860 = 0, +}; + +struct i82860_dev_info { + const char *ctl_name; +}; + +struct i82860_error_info { + u16 errsts; + u32 eap; + u16 derrsyn; + u16 errsts2; +}; + +static const struct i82860_dev_info i82860_devs[] = { + [I82860] = { + .ctl_name = "i82860"}, +}; + +static struct pci_dev *mci_pdev = NULL; /* init dev: in case that AGP code + has already registered driver */ + +static int i82860_registered = 1; + +static void i82860_get_error_info (struct mem_ctl_info *mci, + struct i82860_error_info *info) +{ + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(mci->pdev, I82860_ERRSTS, &info->errsts); + pci_read_config_dword(mci->pdev, I82860_EAP, &info->eap); + pci_read_config_word(mci->pdev, I82860_DERRCTL_STS, &info->derrsyn); + pci_read_config_word(mci->pdev, I82860_ERRSTS, &info->errsts2); + + pci_write_bits16(mci->pdev, I82860_ERRSTS, 0x0003, 0x0003); + + /* + * If the error is the same for both reads then the first set of reads + * is valid. If there is a change then there is a CE no info and the + * second set of reads is valid and should be UE info. + */ + if (!(info->errsts2 & 0x0003)) + return; + if ((info->errsts ^ info->errsts2) & 0x0003) { + pci_read_config_dword(mci->pdev, I82860_EAP, &info->eap); + pci_read_config_word(mci->pdev, I82860_DERRCTL_STS, + &info->derrsyn); + } +} + +static int i82860_process_error_info (struct mem_ctl_info *mci, + struct i82860_error_info *info, int handle_errors) +{ + int row; + + if (!(info->errsts2 & 0x0003)) + return 0; + + if (!handle_errors) + return 1; + + if ((info->errsts ^ info->errsts2) & 0x0003) { + edac_mc_handle_ce_no_info(mci, "UE overwrote CE"); + info->errsts = info->errsts2; + } + + info->eap >>= PAGE_SHIFT; + row = edac_mc_find_csrow_by_page(mci, info->eap); + + if (info->errsts & 0x0002) + edac_mc_handle_ue(mci, info->eap, 0, row, "i82860 UE"); + else + edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row, + 0, "i82860 UE"); + + return 1; +} + +static void i82860_check(struct mem_ctl_info *mci) +{ + struct i82860_error_info info; + + debugf1("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__); + i82860_get_error_info(mci, &info); + i82860_process_error_info(mci, &info, 1); +} + +static int i82860_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc = -ENODEV; + int index; + struct mem_ctl_info *mci = NULL; + unsigned long last_cumul_size; + + u16 mchcfg_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */ + + /* RDRAM has channels but these don't map onto the abstractions that + edac uses. + The device groups from the GRA registers seem to map reasonably + well onto the notion of a chip select row. + There are 16 GRA registers and since the name is associated with + the channel and the GRA registers map to physical devices so we are + going to make 1 channel for group. + */ + mci = edac_mc_alloc(0, 16, 1); + if (!mci) + return -ENOMEM; + + debugf3("MC: " __FILE__ ": %s(): init mci\n", __func__); + + mci->pdev = pdev; + mci->mtype_cap = MEM_FLAG_DDR; + + + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + /* I"m not sure about this but I think that all RDRAM is SECDED */ + mci->edac_cap = EDAC_FLAG_SECDED; + /* adjust FLAGS */ + + mci->mod_name = BS_MOD_STR; + mci->mod_ver = "$Revision: 1.1.2.6 $"; + mci->ctl_name = i82860_devs[dev_idx].ctl_name; + mci->edac_check = i82860_check; + mci->ctl_page_to_phys = NULL; + + pci_read_config_word(mci->pdev, I82860_MCHCFG, &mchcfg_ddim); + mchcfg_ddim = mchcfg_ddim & 0x180; + + /* + * The group row boundary (GRA) reg values are boundary address + * for each DRAM row with a granularity of 16MB. GRA regs are + * cumulative; therefore GRA15 will contain the total memory contained + * in all eight rows. + */ + for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) { + u16 value; + u32 cumul_size; + struct csrow_info *csrow = &mci->csrows[index]; + + pci_read_config_word(mci->pdev, I82860_GBA + index * 2, + &value); + + cumul_size = (value & I82860_GBA_MASK) << + (I82860_GBA_SHIFT - PAGE_SHIFT); + debugf3("MC: " __FILE__ ": %s(): (%d) cumul_size 0x%x\n", + __func__, index, cumul_size); + if (cumul_size == last_cumul_size) + continue; /* not populated */ + + csrow->first_page = last_cumul_size; + csrow->last_page = cumul_size - 1; + csrow->nr_pages = cumul_size - last_cumul_size; + last_cumul_size = cumul_size; + csrow->grain = 1 << 12; /* I82860_EAP has 4KiB reolution */ + csrow->mtype = MEM_RMBS; + csrow->dtype = DEV_UNKNOWN; + csrow->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE; + } + + /* clear counters */ + pci_write_bits16(mci->pdev, I82860_ERRSTS, 0x0003, 0x0003); + + if (edac_mc_add_mc(mci)) { + debugf3("MC: " __FILE__ + ": %s(): failed edac_mc_add_mc()\n", + __func__); + edac_mc_free(mci); + } else { + /* get this far and it's successful */ + debugf3("MC: " __FILE__ ": %s(): success\n", __func__); + rc = 0; + } + return rc; +} + +/* returns count (>= 0), or negative on error */ +static int __devinit i82860_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc; + + debugf0("MC: " __FILE__ ": %s()\n", __func__); + + printk(KERN_INFO "i82860 init one\n"); + if(pci_enable_device(pdev) < 0) + return -EIO; + rc = i82860_probe1(pdev, ent->driver_data); + if(rc == 0) + mci_pdev = pci_dev_get(pdev); + return rc; +} + +static void __devexit i82860_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + debugf0(__FILE__ ": %s()\n", __func__); + + mci = edac_mc_find_mci_by_pdev(pdev); + if ((mci != NULL) && (edac_mc_del_mc(mci) == 0)) + edac_mc_free(mci); +} + +static const struct pci_device_id i82860_pci_tbl[] __devinitdata = { + {PCI_VEND_DEV(INTEL, 82860_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + I82860}, + {0,} /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i82860_pci_tbl); + +static struct pci_driver i82860_driver = { + .name = BS_MOD_STR, + .probe = i82860_init_one, + .remove = __devexit_p(i82860_remove_one), + .id_table = i82860_pci_tbl, +}; + +int __init i82860_init(void) +{ + int pci_rc; + + debugf3("MC: " __FILE__ ": %s()\n", __func__); + if ((pci_rc = pci_register_driver(&i82860_driver)) < 0) + return pci_rc; + + if (!mci_pdev) { + i82860_registered = 0; + mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82860_0, NULL); + if (mci_pdev == NULL) { + debugf0("860 pci_get_device fail\n"); + return -ENODEV; + } + pci_rc = i82860_init_one(mci_pdev, i82860_pci_tbl); + if (pci_rc < 0) { + debugf0("860 init fail\n"); + pci_dev_put(mci_pdev); + return -ENODEV; + } + } + return 0; +} + +static void __exit i82860_exit(void) +{ + debugf3("MC: " __FILE__ ": %s()\n", __func__); + + pci_unregister_driver(&i82860_driver); + if (!i82860_registered) { + i82860_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + } +} + +module_init(i82860_init); +module_exit(i82860_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR + ("Red Hat Inc. (http://www.redhat.com.com) Ben Woodard <woodard@redhat.com>"); +MODULE_DESCRIPTION("ECC support for Intel 82860 memory hub controllers"); diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c new file mode 100644 index 00000000000..79d14dfbcbd --- /dev/null +++ b/drivers/edac/i82875p_edac.c @@ -0,0 +1,532 @@ +/* + * Intel D82875P Memory Controller kernel module + * (C) 2003 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Thayne Harbaugh + * Contributors: + * Wang Zhenyu at intel.com + * + * $Id: edac_i82875p.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $ + * + * Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com + */ + + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/pci.h> +#include <linux/pci_ids.h> + +#include <linux/slab.h> + +#include "edac_mc.h" + + +#ifndef PCI_DEVICE_ID_INTEL_82875_0 +#define PCI_DEVICE_ID_INTEL_82875_0 0x2578 +#endif /* PCI_DEVICE_ID_INTEL_82875_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_82875_6 +#define PCI_DEVICE_ID_INTEL_82875_6 0x257e +#endif /* PCI_DEVICE_ID_INTEL_82875_6 */ + + +/* four csrows in dual channel, eight in single channel */ +#define I82875P_NR_CSROWS(nr_chans) (8/(nr_chans)) + + +/* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */ +#define I82875P_EAP 0x58 /* Error Address Pointer (32b) + * + * 31:12 block address + * 11:0 reserved + */ + +#define I82875P_DERRSYN 0x5c /* DRAM Error Syndrome (8b) + * + * 7:0 DRAM ECC Syndrome + */ + +#define I82875P_DES 0x5d /* DRAM Error Status (8b) + * + * 7:1 reserved + * 0 Error channel 0/1 + */ + +#define I82875P_ERRSTS 0xc8 /* Error Status Register (16b) + * + * 15:10 reserved + * 9 non-DRAM lock error (ndlock) + * 8 Sftwr Generated SMI + * 7 ECC UE + * 6 reserved + * 5 MCH detects unimplemented cycle + * 4 AGP access outside GA + * 3 Invalid AGP access + * 2 Invalid GA translation table + * 1 Unsupported AGP command + * 0 ECC CE + */ + +#define I82875P_ERRCMD 0xca /* Error Command (16b) + * + * 15:10 reserved + * 9 SERR on non-DRAM lock + * 8 SERR on ECC UE + * 7 SERR on ECC CE + * 6 target abort on high exception + * 5 detect unimplemented cyc + * 4 AGP access outside of GA + * 3 SERR on invalid AGP access + * 2 invalid translation table + * 1 SERR on unsupported AGP command + * 0 reserved + */ + + +/* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */ +#define I82875P_PCICMD6 0x04 /* PCI Command Register (16b) + * + * 15:10 reserved + * 9 fast back-to-back - ro 0 + * 8 SERR enable - ro 0 + * 7 addr/data stepping - ro 0 + * 6 parity err enable - ro 0 + * 5 VGA palette snoop - ro 0 + * 4 mem wr & invalidate - ro 0 + * 3 special cycle - ro 0 + * 2 bus master - ro 0 + * 1 mem access dev6 - 0(dis),1(en) + * 0 IO access dev3 - 0(dis),1(en) + */ + +#define I82875P_BAR6 0x10 /* Mem Delays Base ADDR Reg (32b) + * + * 31:12 mem base addr [31:12] + * 11:4 address mask - ro 0 + * 3 prefetchable - ro 0(non),1(pre) + * 2:1 mem type - ro 0 + * 0 mem space - ro 0 + */ + +/* Intel 82875p MMIO register space - device 0 function 0 - MMR space */ + +#define I82875P_DRB_SHIFT 26 /* 64MiB grain */ +#define I82875P_DRB 0x00 /* DRAM Row Boundary (8b x 8) + * + * 7 reserved + * 6:0 64MiB row boundary addr + */ + +#define I82875P_DRA 0x10 /* DRAM Row Attribute (4b x 8) + * + * 7 reserved + * 6:4 row attr row 1 + * 3 reserved + * 2:0 row attr row 0 + * + * 000 = 4KiB + * 001 = 8KiB + * 010 = 16KiB + * 011 = 32KiB + */ + +#define I82875P_DRC 0x68 /* DRAM Controller Mode (32b) + * + * 31:30 reserved + * 29 init complete + * 28:23 reserved + * 22:21 nr chan 00=1,01=2 + * 20 reserved + * 19:18 Data Integ Mode 00=none,01=ecc + * 17:11 reserved + * 10:8 refresh mode + * 7 reserved + * 6:4 mode select + * 3:2 reserved + * 1:0 DRAM type 01=DDR + */ + + +enum i82875p_chips { + I82875P = 0, +}; + + +struct i82875p_pvt { + struct pci_dev *ovrfl_pdev; + void *ovrfl_window; +}; + + +struct i82875p_dev_info { + const char *ctl_name; +}; + + +struct i82875p_error_info { + u16 errsts; + u32 eap; + u8 des; + u8 derrsyn; + u16 errsts2; +}; + + +static const struct i82875p_dev_info i82875p_devs[] = { + [I82875P] = { + .ctl_name = "i82875p"}, +}; + +static struct pci_dev *mci_pdev = NULL; /* init dev: in case that AGP code + has already registered driver */ +static int i82875p_registered = 1; + +static void i82875p_get_error_info (struct mem_ctl_info *mci, + struct i82875p_error_info *info) +{ + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts); + pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap); + pci_read_config_byte(mci->pdev, I82875P_DES, &info->des); + pci_read_config_byte(mci->pdev, I82875P_DERRSYN, &info->derrsyn); + pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts2); + + pci_write_bits16(mci->pdev, I82875P_ERRSTS, 0x0081, 0x0081); + + /* + * If the error is the same then we can for both reads then + * the first set of reads is valid. If there is a change then + * there is a CE no info and the second set of reads is valid + * and should be UE info. + */ + if (!(info->errsts2 & 0x0081)) + return; + if ((info->errsts ^ info->errsts2) & 0x0081) { + pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap); + pci_read_config_byte(mci->pdev, I82875P_DES, &info->des); + pci_read_config_byte(mci->pdev, I82875P_DERRSYN, + &info->derrsyn); + } +} + +static int i82875p_process_error_info (struct mem_ctl_info *mci, + struct i82875p_error_info *info, int handle_errors) +{ + int row, multi_chan; + + multi_chan = mci->csrows[0].nr_channels - 1; + + if (!(info->errsts2 & 0x0081)) + return 0; + + if (!handle_errors) + return 1; + + if ((info->errsts ^ info->errsts2) & 0x0081) { + edac_mc_handle_ce_no_info(mci, "UE overwrote CE"); + info->errsts = info->errsts2; + } + + info->eap >>= PAGE_SHIFT; + row = edac_mc_find_csrow_by_page(mci, info->eap); + + if (info->errsts & 0x0080) + edac_mc_handle_ue(mci, info->eap, 0, row, "i82875p UE"); + else + edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row, + multi_chan ? (info->des & 0x1) : 0, + "i82875p CE"); + + return 1; +} + + +static void i82875p_check(struct mem_ctl_info *mci) +{ + struct i82875p_error_info info; + + debugf1("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__); + i82875p_get_error_info(mci, &info); + i82875p_process_error_info(mci, &info, 1); +} + + +#ifdef CONFIG_PROC_FS +extern int pci_proc_attach_device(struct pci_dev *); +#endif + +static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc = -ENODEV; + int index; + struct mem_ctl_info *mci = NULL; + struct i82875p_pvt *pvt = NULL; + unsigned long last_cumul_size; + struct pci_dev *ovrfl_pdev; + void __iomem *ovrfl_window = NULL; + + u32 drc; + u32 drc_chan; /* Number of channels 0=1chan,1=2chan */ + u32 nr_chans; + u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */ + + debugf0("MC: " __FILE__ ": %s()\n", __func__); + + ovrfl_pdev = pci_find_device(PCI_VEND_DEV(INTEL, 82875_6), NULL); + + if (!ovrfl_pdev) { + /* + * Intel tells BIOS developers to hide device 6 which + * configures the overflow device access containing + * the DRBs - this is where we expose device 6. + * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm + */ + pci_write_bits8(pdev, 0xf4, 0x2, 0x2); + ovrfl_pdev = + pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0)); + if (!ovrfl_pdev) + goto fail; + } +#ifdef CONFIG_PROC_FS + if (!ovrfl_pdev->procent && pci_proc_attach_device(ovrfl_pdev)) { + printk(KERN_ERR "MC: " __FILE__ + ": %s(): Failed to attach overflow device\n", + __func__); + goto fail; + } +#endif /* CONFIG_PROC_FS */ + if (pci_enable_device(ovrfl_pdev)) { + printk(KERN_ERR "MC: " __FILE__ + ": %s(): Failed to enable overflow device\n", + __func__); + goto fail; + } + + if (pci_request_regions(ovrfl_pdev, pci_name(ovrfl_pdev))) { +#ifdef CORRECT_BIOS + goto fail; +#endif + } + /* cache is irrelevant for PCI bus reads/writes */ + ovrfl_window = ioremap_nocache(pci_resource_start(ovrfl_pdev, 0), + pci_resource_len(ovrfl_pdev, 0)); + + if (!ovrfl_window) { + printk(KERN_ERR "MC: " __FILE__ + ": %s(): Failed to ioremap bar6\n", __func__); + goto fail; + } + + /* need to find out the number of channels */ + drc = readl(ovrfl_window + I82875P_DRC); + drc_chan = ((drc >> 21) & 0x1); + nr_chans = drc_chan + 1; + drc_ddim = (drc >> 18) & 0x1; + + mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans), + nr_chans); + + if (!mci) { + rc = -ENOMEM; + goto fail; + } + + debugf3("MC: " __FILE__ ": %s(): init mci\n", __func__); + + mci->pdev = pdev; + mci->mtype_cap = MEM_FLAG_DDR; + + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_UNKNOWN; + /* adjust FLAGS */ + + mci->mod_name = BS_MOD_STR; + mci->mod_ver = "$Revision: 1.5.2.11 $"; + mci->ctl_name = i82875p_devs[dev_idx].ctl_name; + mci->edac_check = i82875p_check; + mci->ctl_page_to_phys = NULL; + + debugf3("MC: " __FILE__ ": %s(): init pvt\n", __func__); + + pvt = (struct i82875p_pvt *) mci->pvt_info; + pvt->ovrfl_pdev = ovrfl_pdev; + pvt->ovrfl_window = ovrfl_window; + + /* + * The dram row boundary (DRB) reg values are boundary address + * for each DRAM row with a granularity of 32 or 64MB (single/dual + * channel operation). DRB regs are cumulative; therefore DRB7 will + * contain the total memory contained in all eight rows. + */ + for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) { + u8 value; + u32 cumul_size; + struct csrow_info *csrow = &mci->csrows[index]; + + value = readb(ovrfl_window + I82875P_DRB + index); + cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT); + debugf3("MC: " __FILE__ ": %s(): (%d) cumul_size 0x%x\n", + __func__, index, cumul_size); + if (cumul_size == last_cumul_size) + continue; /* not populated */ + + csrow->first_page = last_cumul_size; + csrow->last_page = cumul_size - 1; + csrow->nr_pages = cumul_size - last_cumul_size; + last_cumul_size = cumul_size; + csrow->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */ + csrow->mtype = MEM_DDR; + csrow->dtype = DEV_UNKNOWN; + csrow->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE; + } + + /* clear counters */ + pci_write_bits16(mci->pdev, I82875P_ERRSTS, 0x0081, 0x0081); + + if (edac_mc_add_mc(mci)) { + debugf3("MC: " __FILE__ + ": %s(): failed edac_mc_add_mc()\n", __func__); + goto fail; + } + + /* get this far and it's successful */ + debugf3("MC: " __FILE__ ": %s(): success\n", __func__); + return 0; + + fail: + if (mci) + edac_mc_free(mci); + + if (ovrfl_window) + iounmap(ovrfl_window); + + if (ovrfl_pdev) { + pci_release_regions(ovrfl_pdev); + pci_disable_device(ovrfl_pdev); + } + + /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */ + return rc; +} + + +/* returns count (>= 0), or negative on error */ +static int __devinit i82875p_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc; + + debugf0("MC: " __FILE__ ": %s()\n", __func__); + + printk(KERN_INFO "i82875p init one\n"); + if(pci_enable_device(pdev) < 0) + return -EIO; + rc = i82875p_probe1(pdev, ent->driver_data); + if (mci_pdev == NULL) + mci_pdev = pci_dev_get(pdev); + return rc; +} + + +static void __devexit i82875p_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct i82875p_pvt *pvt = NULL; + + debugf0(__FILE__ ": %s()\n", __func__); + + if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL) + return; + + pvt = (struct i82875p_pvt *) mci->pvt_info; + if (pvt->ovrfl_window) + iounmap(pvt->ovrfl_window); + + if (pvt->ovrfl_pdev) { +#ifdef CORRECT_BIOS + pci_release_regions(pvt->ovrfl_pdev); +#endif /*CORRECT_BIOS */ + pci_disable_device(pvt->ovrfl_pdev); + pci_dev_put(pvt->ovrfl_pdev); + } + + if (edac_mc_del_mc(mci)) + return; + + edac_mc_free(mci); +} + + +static const struct pci_device_id i82875p_pci_tbl[] __devinitdata = { + {PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + I82875P}, + {0,} /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl); + + +static struct pci_driver i82875p_driver = { + .name = BS_MOD_STR, + .probe = i82875p_init_one, + .remove = __devexit_p(i82875p_remove_one), + .id_table = i82875p_pci_tbl, +}; + + +int __init i82875p_init(void) +{ + int pci_rc; + + debugf3("MC: " __FILE__ ": %s()\n", __func__); + pci_rc = pci_register_driver(&i82875p_driver); + if (pci_rc < 0) + return pci_rc; + if (mci_pdev == NULL) { + i82875p_registered = 0; + mci_pdev = + pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82875_0, NULL); + if (!mci_pdev) { + debugf0("875p pci_get_device fail\n"); + return -ENODEV; + } + pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl); + if (pci_rc < 0) { + debugf0("875p init fail\n"); + pci_dev_put(mci_pdev); + return -ENODEV; + } + } + return 0; +} + + +static void __exit i82875p_exit(void) +{ + debugf3("MC: " __FILE__ ": %s()\n", __func__); + + pci_unregister_driver(&i82875p_driver); + if (!i82875p_registered) { + i82875p_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + } +} + + +module_init(i82875p_init); +module_exit(i82875p_exit); + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh"); +MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers"); |