diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/cpufreq/Kconfig.arm | 7 | ||||
| -rw-r--r-- | drivers/cpufreq/Makefile | 1 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos-cpufreq.c | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos5250-cpufreq.c | 347 |
4 files changed, 357 insertions, 0 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 9b99a9672a5..2e3351526ff 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -48,6 +48,7 @@ config ARM_EXYNOS_CPUFREQ depends on ARCH_EXYNOS select ARM_EXYNOS4210_CPUFREQ if CPU_EXYNOS4210 select ARM_EXYNOS4X12_CPUFREQ if (SOC_EXYNOS4212 || SOC_EXYNOS4412) + select ARM_EXYNOS5250_CPUFREQ if SOC_EXYNOS5250 default y help This adds the CPUFreq driver common part for Samsung @@ -67,3 +68,9 @@ config ARM_EXYNOS4X12_CPUFREQ help This adds the CPUFreq driver for Samsung EXYNOS4X12 SoC (EXYNOS4212 or EXYNOS4412). + +config ARM_EXYNOS5250_CPUFREQ + bool "Samsung EXYNOS5250" + help + This adds the CPUFreq driver for Samsung EXYNOS5250 + SoC. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index f37bbccbc87..3cbbcd09c65 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o +obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o obj-$(CONFIG_ARCH_OMAP2PLUS) += omap-cpufreq.o ################################################################################## diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index 2c63b68d5b2..b243a7ee01f 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -256,6 +256,8 @@ static int __init exynos_cpufreq_init(void) ret = exynos4210_cpufreq_init(exynos_info); else if (soc_is_exynos4212() || soc_is_exynos4412()) ret = exynos4x12_cpufreq_init(exynos_info); + else if (soc_is_exynos5250()) + ret = exynos5250_cpufreq_init(exynos_info); else pr_err("%s: CPU type not found\n", __func__); diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c new file mode 100644 index 00000000000..a88331644eb --- /dev/null +++ b/drivers/cpufreq/exynos5250-cpufreq.c @@ -0,0 +1,347 @@ +/* + * Copyright (c) 2010-20122Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS5250 - CPU frequency scaling support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/cpufreq.h> + +#define CPUFREQ_LEVEL_END (L15 + 1) + +static int max_support_idx; +static int min_support_idx = (CPUFREQ_LEVEL_END - 1); +static struct clk *cpu_clk; +static struct clk *moutcore; +static struct clk *mout_mpll; +static struct clk *mout_apll; + +struct cpufreq_clkdiv { + unsigned int index; + unsigned int clkdiv; + unsigned int clkdiv1; +}; + +static unsigned int exynos5250_volt_table[CPUFREQ_LEVEL_END]; + +static struct cpufreq_frequency_table exynos5250_freq_table[] = { + {L0, 1700 * 1000}, + {L1, 1600 * 1000}, + {L2, 1500 * 1000}, + {L3, 1400 * 1000}, + {L4, 1300 * 1000}, + {L5, 1200 * 1000}, + {L6, 1100 * 1000}, + {L7, 1000 * 1000}, + {L8, 900 * 1000}, + {L9, 800 * 1000}, + {L10, 700 * 1000}, + {L11, 600 * 1000}, + {L12, 500 * 1000}, + {L13, 400 * 1000}, + {L14, 300 * 1000}, + {L15, 200 * 1000}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct cpufreq_clkdiv exynos5250_clkdiv_table[CPUFREQ_LEVEL_END]; + +static unsigned int clkdiv_cpu0_5250[CPUFREQ_LEVEL_END][8] = { + /* + * Clock divider value for following + * { ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 } + */ + { 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1700 MHz - N/A */ + { 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1600 MHz - N/A */ + { 0, 3, 7, 7, 5, 1, 3, 0 }, /* 1500 MHz - N/A */ + { 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1400 MHz */ + { 0, 3, 7, 7, 6, 1, 3, 0 }, /* 1300 MHz */ + { 0, 3, 7, 7, 5, 1, 3, 0 }, /* 1200 MHz */ + { 0, 2, 7, 7, 5, 1, 2, 0 }, /* 1100 MHz */ + { 0, 2, 7, 7, 4, 1, 2, 0 }, /* 1000 MHz */ + { 0, 2, 7, 7, 4, 1, 2, 0 }, /* 900 MHz */ + { 0, 2, 7, 7, 3, 1, 1, 0 }, /* 800 MHz */ + { 0, 1, 7, 7, 3, 1, 1, 0 }, /* 700 MHz */ + { 0, 1, 7, 7, 2, 1, 1, 0 }, /* 600 MHz */ + { 0, 1, 7, 7, 2, 1, 1, 0 }, /* 500 MHz */ + { 0, 1, 7, 7, 1, 1, 1, 0 }, /* 400 MHz */ + { 0, 1, 7, 7, 1, 1, 1, 0 }, /* 300 MHz */ + { 0, 1, 7, 7, 1, 1, 1, 0 }, /* 200 MHz */ +}; + +static unsigned int clkdiv_cpu1_5250[CPUFREQ_LEVEL_END][2] = { + /* Clock divider value for following + * { COPY, HPM } + */ + { 0, 2 }, /* 1700 MHz - N/A */ + { 0, 2 }, /* 1600 MHz - N/A */ + { 0, 2 }, /* 1500 MHz - N/A */ + { 0, 2 }, /* 1400 MHz */ + { 0, 2 }, /* 1300 MHz */ + { 0, 2 }, /* 1200 MHz */ + { 0, 2 }, /* 1100 MHz */ + { 0, 2 }, /* 1000 MHz */ + { 0, 2 }, /* 900 MHz */ + { 0, 2 }, /* 800 MHz */ + { 0, 2 }, /* 700 MHz */ + { 0, 2 }, /* 600 MHz */ + { 0, 2 }, /* 500 MHz */ + { 0, 2 }, /* 400 MHz */ + { 0, 2 }, /* 300 MHz */ + { 0, 2 }, /* 200 MHz */ +}; + +static unsigned int exynos5_apll_pms_table[CPUFREQ_LEVEL_END] = { + (0), /* 1700 MHz - N/A */ + (0), /* 1600 MHz - N/A */ + (0), /* 1500 MHz - N/A */ + (0), /* 1400 MHz */ + ((325 << 16) | (6 << 8) | 0), /* 1300 MHz */ + ((200 << 16) | (4 << 8) | 0), /* 1200 MHz */ + ((275 << 16) | (6 << 8) | 0), /* 1100 MHz */ + ((125 << 16) | (3 << 8) | 0), /* 1000 MHz */ + ((150 << 16) | (4 << 8) | 0), /* 900 MHz */ + ((100 << 16) | (3 << 8) | 0), /* 800 MHz */ + ((175 << 16) | (3 << 8) | 1), /* 700 MHz */ + ((200 << 16) | (4 << 8) | 1), /* 600 MHz */ + ((125 << 16) | (3 << 8) | 1), /* 500 MHz */ + ((100 << 16) | (3 << 8) | 1), /* 400 MHz */ + ((200 << 16) | (4 << 8) | 2), /* 300 MHz */ + ((100 << 16) | (3 << 8) | 2), /* 200 MHz */ +}; + +/* ASV group voltage table */ +static const unsigned int asv_voltage_5250[CPUFREQ_LEVEL_END] = { + 0, 0, 0, 0, 0, 0, 0, /* 1700 MHz ~ 1100 MHz Not supported */ + 1175000, 1125000, 1075000, 1050000, 1000000, + 950000, 925000, 925000, 900000 +}; + +static void set_clkdiv(unsigned int div_index) +{ + unsigned int tmp; + + /* Change Divider - CPU0 */ + + tmp = exynos5250_clkdiv_table[div_index].clkdiv; + + __raw_writel(tmp, EXYNOS5_CLKDIV_CPU0); + + while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111) + cpu_relax(); + + /* Change Divider - CPU1 */ + tmp = exynos5250_clkdiv_table[div_index].clkdiv1; + + __raw_writel(tmp, EXYNOS5_CLKDIV_CPU1); + + while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11) + cpu_relax(); +} + +static void set_apll(unsigned int new_index, + unsigned int old_index) +{ + unsigned int tmp, pdiv; + + /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ + clk_set_parent(moutcore, mout_mpll); + + do { + cpu_relax(); + tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16); + tmp &= 0x7; + } while (tmp != 0x2); + + /* 2. Set APLL Lock time */ + pdiv = ((exynos5_apll_pms_table[new_index] >> 8) & 0x3f); + + __raw_writel((pdiv * 250), EXYNOS5_APLL_LOCK); + + /* 3. Change PLL PMS values */ + tmp = __raw_readl(EXYNOS5_APLL_CON0); + tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0)); + tmp |= exynos5_apll_pms_table[new_index]; + __raw_writel(tmp, EXYNOS5_APLL_CON0); + + /* 4. wait_lock_time */ + do { + cpu_relax(); + tmp = __raw_readl(EXYNOS5_APLL_CON0); + } while (!(tmp & (0x1 << 29))); + + /* 5. MUX_CORE_SEL = APLL */ + clk_set_parent(moutcore, mout_apll); + + do { + cpu_relax(); + tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU); + tmp &= (0x7 << 16); + } while (tmp != (0x1 << 16)); + +} + +bool exynos5250_pms_change(unsigned int old_index, unsigned int new_index) +{ + unsigned int old_pm = (exynos5_apll_pms_table[old_index] >> 8); + unsigned int new_pm = (exynos5_apll_pms_table[new_index] >> 8); + + return (old_pm == new_pm) ? 0 : 1; +} + +static void exynos5250_set_frequency(unsigned int old_index, + unsigned int new_index) +{ + unsigned int tmp; + + if (old_index > new_index) { + if (!exynos5250_pms_change(old_index, new_index)) { + /* 1. Change the system clock divider values */ + set_clkdiv(new_index); + /* 2. Change just s value in apll m,p,s value */ + tmp = __raw_readl(EXYNOS5_APLL_CON0); + tmp &= ~(0x7 << 0); + tmp |= (exynos5_apll_pms_table[new_index] & 0x7); + __raw_writel(tmp, EXYNOS5_APLL_CON0); + + } else { + /* Clock Configuration Procedure */ + /* 1. Change the system clock divider values */ + set_clkdiv(new_index); + /* 2. Change the apll m,p,s value */ + set_apll(new_index, old_index); + } + } else if (old_index < new_index) { + if (!exynos5250_pms_change(old_index, new_index)) { + /* 1. Change just s value in apll m,p,s value */ + tmp = __raw_readl(EXYNOS5_APLL_CON0); + tmp &= ~(0x7 << 0); + tmp |= (exynos5_apll_pms_table[new_index] & 0x7); + __raw_writel(tmp, EXYNOS5_APLL_CON0); + /* 2. Change the system clock divider values */ + set_clkdiv(new_index); + } else { + /* Clock Configuration Procedure */ + /* 1. Change the apll m,p,s value */ + set_apll(new_index, old_index); + /* 2. Change the system clock divider values */ + set_clkdiv(new_index); + } + } +} + +static void __init set_volt_table(void) +{ + unsigned int i; + + exynos5250_freq_table[L0].frequency = CPUFREQ_ENTRY_INVALID; + exynos5250_freq_table[L1].frequency = CPUFREQ_ENTRY_INVALID; + exynos5250_freq_table[L2].frequency = CPUFREQ_ENTRY_INVALID; + exynos5250_freq_table[L3].frequency = CPUFREQ_ENTRY_INVALID; + exynos5250_freq_table[L4].frequency = CPUFREQ_ENTRY_INVALID; + exynos5250_freq_table[L5].frequency = CPUFREQ_ENTRY_INVALID; + exynos5250_freq_table[L6].frequency = CPUFREQ_ENTRY_INVALID; + + max_support_idx = L7; + + for (i = 0 ; i < CPUFREQ_LEVEL_END ; i++) + exynos5250_volt_table[i] = asv_voltage_5250[i]; +} + +int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) +{ + int i; + unsigned int tmp; + unsigned long rate; + + set_volt_table(); + + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + moutcore = clk_get(NULL, "mout_cpu"); + if (IS_ERR(moutcore)) + goto err_moutcore; + + mout_mpll = clk_get(NULL, "mout_mpll"); + if (IS_ERR(mout_mpll)) + goto err_mout_mpll; + + rate = clk_get_rate(mout_mpll) / 1000; + + mout_apll = clk_get(NULL, "mout_apll"); + if (IS_ERR(mout_apll)) + goto err_mout_apll; + + for (i = L0; i < CPUFREQ_LEVEL_END; i++) { + + exynos5250_clkdiv_table[i].index = i; + + tmp = __raw_readl(EXYNOS5_CLKDIV_CPU0); + + tmp &= ~((0x7 << 0) | (0x7 << 4) | (0x7 << 8) | + (0x7 << 12) | (0x7 << 16) | (0x7 << 20) | + (0x7 << 24) | (0x7 << 28)); + + tmp |= ((clkdiv_cpu0_5250[i][0] << 0) | + (clkdiv_cpu0_5250[i][1] << 4) | + (clkdiv_cpu0_5250[i][2] << 8) | + (clkdiv_cpu0_5250[i][3] << 12) | + (clkdiv_cpu0_5250[i][4] << 16) | + (clkdiv_cpu0_5250[i][5] << 20) | + (clkdiv_cpu0_5250[i][6] << 24) | + (clkdiv_cpu0_5250[i][7] << 28)); + + exynos5250_clkdiv_table[i].clkdiv = tmp; + + tmp = __raw_readl(EXYNOS5_CLKDIV_CPU1); + + tmp &= ~((0x7 << 0) | (0x7 << 4)); + + tmp |= ((clkdiv_cpu1_5250[i][0] << 0) | + (clkdiv_cpu1_5250[i][1] << 4)); + + exynos5250_clkdiv_table[i].clkdiv1 = tmp; + } + + info->mpll_freq_khz = rate; + /* 1000Mhz */ + info->pm_lock_idx = L7; + /* 800Mhz */ + info->pll_safe_idx = L9; + info->max_support_idx = max_support_idx; + info->min_support_idx = min_support_idx; + info->cpu_clk = cpu_clk; + info->volt_table = exynos5250_volt_table; + info->freq_table = exynos5250_freq_table; + info->set_freq = exynos5250_set_frequency; + info->need_apll_change = exynos5250_pms_change; + + return 0; + +err_mout_apll: + clk_put(mout_mpll); +err_mout_mpll: + clk_put(moutcore); +err_moutcore: + clk_put(cpu_clk); + + pr_err("%s: failed initialization\n", __func__); + return -EINVAL; +} +EXPORT_SYMBOL(exynos5250_cpufreq_init); |