diff options
Diffstat (limited to 'drivers')
70 files changed, 190 insertions, 199 deletions
diff --git a/drivers/acorn/block/mfmhd.c b/drivers/acorn/block/mfmhd.c index 3dd6b7bb5d3..1bace29f4b6 100644 --- a/drivers/acorn/block/mfmhd.c +++ b/drivers/acorn/block/mfmhd.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/drivers/block/mfmhd.c + * linux/drivers/acorn/block/mfmhd.c * * Copyright (C) 1995, 1996 Russell King, Dave Alan Gilbert (gilbertd@cs.man.ac.uk) * diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 56c5ba87462..0f9d4be7ed7 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -253,7 +253,7 @@ config ACPI_CUSTOM_DSDT depends on !STANDALONE default n help - Thist option is to load a custom ACPI DSDT + This option is to load a custom ACPI DSDT If you don't know what that is, say N. config ACPI_CUSTOM_DSDT_FILE @@ -310,7 +310,7 @@ config X86_PM_TIMER The Power Management Timer is available on all ACPI-capable, in most cases even if ACPI is unusable or blacklisted. - This timing source is not affected by powermanagement features + This timing source is not affected by power management features like aggressive processor idling, throttling, frequency and/or voltage scaling, unlike the commonly used Time Stamp Counter (TSC) timing source. @@ -345,7 +345,7 @@ config ACPI_HOTPLUG_MEMORY Enabling this driver assumes that your platform hardware and firmware have support for hot-plugging physical memory. If your system does not support physically adding or ripping out - memory DIMMs at some platfrom defined granularity (individually + memory DIMMs at some platform defined granularity (individually or as a bank) at runtime, then you need not enable this driver. If one selects "m," this driver can be loaded using the following diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 422e31d5f8e..17dc22282e1 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -207,8 +207,7 @@ config BLK_DEV_UMEM module will be called umem. The umem driver has not yet been allocated a MAJOR number, so - one is chosen dynamically. Use "devfs" or look in /proc/devices - for the device number + one is chosen dynamically. config BLK_DEV_UBD bool "Virtual block device" @@ -407,7 +406,7 @@ config BLK_DEV_RAM_BLOCKSIZE depends on BLK_DEV_RAM default "1024" help - The default value is 1024 kilobytes. PAGE_SIZE is a much more + The default value is 1024 bytes. PAGE_SIZE is a much more efficient choice however. The default is kept to ensure initrd setups function - apparently needed by the rd_load_image routine that supposes the filesystem in the image uses a 1024 blocksize. diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index b38c84a7a8e..2a0c50d84fc 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -1,4 +1,4 @@ -/* linux/drivers/cdrom/cdrom.c. +/* linux/drivers/cdrom/cdrom.c Copyright (c) 1996, 1997 David A. van Leeuwen. Copyright (c) 1997, 1998 Erik Andersen <andersee@debian.org> Copyright (c) 1998, 1999 Jens Axboe <axboe@image.dk> diff --git a/drivers/char/hw_random/ixp4xx-rng.c b/drivers/char/hw_random/ixp4xx-rng.c index ef71022423c..3cf4d641a51 100644 --- a/drivers/char/hw_random/ixp4xx-rng.c +++ b/drivers/char/hw_random/ixp4xx-rng.c @@ -1,5 +1,5 @@ /* - * drivers/char/rng/ixp4xx-rng.c + * drivers/char/hw_random/ixp4xx-rng.c * * RNG driver for Intel IXP4xx family of NPUs * diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index a01d796d1ee..e13dd1892bf 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -1,5 +1,5 @@ /* - * driver/char/hw_random/omap-rng.c + * drivers/char/hw_random/omap-rng.c * * RNG driver for TI OMAP CPU family * diff --git a/drivers/char/mwave/README b/drivers/char/mwave/README index 70f8d19fb79..480251fc78e 100644 --- a/drivers/char/mwave/README +++ b/drivers/char/mwave/README @@ -41,10 +41,7 @@ Example to enable the 3780i DSP using ttyS1 resources: Accessing the driver -------------------- -You must also create a node for the driver. Without devfs: +You must also create a node for the driver: mkdir -p /dev/modems mknod --mode=660 /dev/modems/mwave c 10 219 -With devfs: - mkdir -p /dev/modems - ln -s ../misc/mwave /dev/modems/mwave diff --git a/drivers/char/watchdog/ixp2000_wdt.c b/drivers/char/watchdog/ixp2000_wdt.c index c91d9a660ec..fd955dbd588 100644 --- a/drivers/char/watchdog/ixp2000_wdt.c +++ b/drivers/char/watchdog/ixp2000_wdt.c @@ -1,5 +1,5 @@ /* - * drivers/watchdog/ixp2000_wdt.c + * drivers/char/watchdog/ixp2000_wdt.c * * Watchdog driver for Intel IXP2000 network processors * diff --git a/drivers/char/watchdog/ixp4xx_wdt.c b/drivers/char/watchdog/ixp4xx_wdt.c index db477f71238..5864bb865cf 100644 --- a/drivers/char/watchdog/ixp4xx_wdt.c +++ b/drivers/char/watchdog/ixp4xx_wdt.c @@ -1,5 +1,5 @@ /* - * drivers/watchdog/ixp4xx_wdt.c + * drivers/char/watchdog/ixp4xx_wdt.c * * Watchdog driver for Intel IXP4xx network processors * diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 731c3d5da0d..88f462122a3 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -64,7 +64,7 @@ config DELL_RBU help Say m if you want to have the option of updating the BIOS for your DELL system. Note you need a Dell OpenManage or Dell Update package (DUP) - supporting application to comunicate with the BIOS regarding the new + supporting application to communicate with the BIOS regarding the new image for the image update to take effect. See <file:Documentation/dell_rbu.txt> for more details on the driver. diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index b4502ed6579..5c261e1f92b 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -1,5 +1,5 @@ /* - * linux/arch/i386/kernel/edd.c + * linux/drivers/firmware/edd.c * Copyright (C) 2002, 2003, 2004 Dell Inc. * by Matt Domsch <Matt_Domsch@dell.com> * disk signature by Matt Domsch, Andrew Wilks, and Sandeep K. Shandilya diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 0d9667921f6..510816c16da 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -333,10 +333,10 @@ config I2C_PARPORT_LIGHT This driver is a light version of i2c-parport. It doesn't depend on the parport driver, and uses direct I/O access instead. This - might be prefered on embedded systems where wasting memory for + might be preferred on embedded systems where wasting memory for the clean but heavy parport handling is not an option. The drawback is a reduced portability and the impossibility to - dasiy-chain other parallel port devices. + daisy-chain other parallel port devices. Don't say Y here if you said Y or M to i2c-parport. Saying M to both is possible but both modules should not be loaded at the same diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 5bccb5d6831..80d4ba1bdfe 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -1,5 +1,5 @@ /* - * drivers/i2c/i2c-ibm_iic.c + * drivers/i2c/busses/i2c-ibm_iic.c * * Support for the IIC peripheral on IBM PPC 4xx * diff --git a/drivers/i2c/busses/i2c-ibm_iic.h b/drivers/i2c/busses/i2c-ibm_iic.h index 2b3219d00e9..59d7b437f7f 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.h +++ b/drivers/i2c/busses/i2c-ibm_iic.h @@ -1,5 +1,5 @@ /* - * drivers/i2c/i2c-ibm_iic.h + * drivers/i2c/busses/i2c-ibm_iic.h * * Support for the IIC peripheral on IBM PPC 4xx * diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index ab573254a8a..1ce01fb0ac0 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -1,5 +1,5 @@ /* - * drivers/i2c/i2c-adap-ixp4xx.c + * drivers/i2c/busses/i2c-ixp4xx.c * * Intel's IXP4xx XScale NPU chipsets (IXP420, 421, 422, 425) do not have * an on board I2C controller but provide 16 GPIO pins that are often diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index 8b65a5cf825..8ddbae4fafe 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -1,4 +1,4 @@ -/* linux/drivers/i2c/scx200_i2c.c +/* linux/drivers/i2c/busses/scx200_i2c.c Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index 15955996a1f..608ca871744 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -1,5 +1,5 @@ /* - * drivers/ide/ide-h8300.c + * drivers/ide/h8300/ide-h8300.c * H8/300 generic IDE interface */ diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 31ad79f52df..91c5344a945 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/ide-pmac.c + * linux/drivers/ide/ppc/pmac.c * * Support for IDE interfaces on PowerMacs. * These IDE interfaces are memory-mapped and have a DBDMA channel diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig index 2769e505f05..672b92ef9f2 100644 --- a/drivers/ieee1394/Kconfig +++ b/drivers/ieee1394/Kconfig @@ -140,7 +140,7 @@ config IEEE1394_SBP2_PHYS_DMA help This builds sbp2 for use with non-OHCI host adapters which do not support physical DMA or for when ohci1394 is run with phys_dma=0. - Physical DMA is data movement without assistence of the drivers' + Physical DMA is data movement without assistance of the drivers' interrupt handlers. This option includes the interrupt handlers that are required in absence of this hardware feature. diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig index d74653d7de1..c75322d820d 100644 --- a/drivers/infiniband/ulp/ipoib/Kconfig +++ b/drivers/infiniband/ulp/ipoib/Kconfig @@ -26,7 +26,7 @@ config INFINIBAND_IPOIB_DEBUG_DATA bool "IP-over-InfiniBand data path debugging" depends on INFINIBAND_IPOIB_DEBUG ---help--- - This option compiles debugging code into the the data path + This option compiles debugging code into the data path of the IPoIB driver. The output can be turned on via the data_debug_level module parameter; however, even with output turned off, this debugging code will have some performance diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 67519ef0ef9..271263443c3 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -32,7 +32,7 @@ config JOYSTICK_ANALOG module will be called analog. config JOYSTICK_A3D - tristate "Assasin 3D and MadCatz Panther devices" + tristate "Assassin 3D and MadCatz Panther devices" select GAMEPORT help Say Y here if you have an FPGaming or MadCatz controller using the diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index c62e00c79de..679bde34d24 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -177,7 +177,7 @@ config KEYBOARD_HIL_OLD However, it has been thoroughly tested and is stable. If you want full HIL support including support for multiple - keyboards, mices and tablets, you have to enable the + keyboards, mice, and tablets, you have to enable the "HP System Device Controller i8042 Support" in the input/serio submenu. diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 98acf170252..8cdbfeca590 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -115,9 +115,9 @@ config HP_SDC depends on GSC && SERIO default y ---help--- - This option enables supports for the the "System Device + This option enables support for the "System Device Controller", an i8042 carrying microcode to manage a - few miscellanous devices on some Hewlett Packard systems. + few miscellaneous devices on some Hewlett Packard systems. The SDC itself contains a 10ms resolution timer/clock capable of delivering interrupts on a periodic and one-shot basis. The SDC may also be connected to a battery-backed real-time diff --git a/drivers/isdn/hardware/eicon/Kconfig b/drivers/isdn/hardware/eicon/Kconfig index 51e66bc6420..01d4afd9d84 100644 --- a/drivers/isdn/hardware/eicon/Kconfig +++ b/drivers/isdn/hardware/eicon/Kconfig @@ -47,7 +47,7 @@ config ISDN_DIVAS_MAINT tristate "DIVA Maint driver support" depends on ISDN_DIVAS && m help - Enable Divas Maintainance driver. + Enable Divas Maintenance driver. endmenu diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig index 6dfc94122dd..eb57a988e04 100644 --- a/drivers/isdn/hisax/Kconfig +++ b/drivers/isdn/hisax/Kconfig @@ -321,7 +321,7 @@ config HISAX_HFC_PCI help This enables HiSax support for the HFC-S PCI 2BDS0 based cards. - For more informations see under + For more information see under <file:Documentation/isdn/README.hfc-pci>. config HISAX_W6692 diff --git a/drivers/isdn/hisax/amd7930_fn.h b/drivers/isdn/hisax/amd7930_fn.h index e039c3a0f2a..1f4d80c5e5a 100644 --- a/drivers/isdn/hisax/amd7930_fn.h +++ b/drivers/isdn/hisax/amd7930_fn.h @@ -1,4 +1,4 @@ -/* 2001/10/02 +/* drivers/isdn/hisax/amd7930_fn.h * * gerdes_amd7930.h Header-file included by * gerdes_amd7930.c diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index d424b445202..aecbbe2e89a 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -125,7 +125,7 @@ EXPORT_SYMBOL_GPL(led_classdev_register); /** * led_classdev_unregister - unregisters a object of led_properties class. - * @led_cdev: the led device to unreigister + * @led_cdev: the led device to unregister * * Unregisters a previously registered via led_classdev_register object. */ diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c index 3b87951aa55..6f2d449ba98 100644 --- a/drivers/leds/leds-locomo.c +++ b/drivers/leds/leds-locomo.c @@ -1,5 +1,5 @@ /* - * linux/drivers/leds/locomo.c + * linux/drivers/leds/leds-locomo.c * * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu> * diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index d5d649f5ccd..7f8477d3a66 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -186,7 +186,7 @@ config THERM_ADT746X depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 help This driver provides some thermostat and fan control for the - iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty + iBook G4, and the ATI based aluminium PowerBooks, allowing slightly better fan behaviour by default, and some manual control. config THERM_PM72 diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index efd51e01c06..b7fb367808d 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -1,5 +1,5 @@ /* - * drivers/input/adbhid.c + * drivers/macintosh/adbhid.c * * ADB HID driver for Power Macintosh computers. * diff --git a/drivers/md/md.c b/drivers/md/md.c index 38a0a5741d5..cb8281605be 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4438,8 +4438,7 @@ static int md_release(struct inode *inode, struct file * file) { mddev_t *mddev = inode->i_bdev->bd_disk->private_data; - if (!mddev) - BUG(); + BUG_ON(!mddev); mddev_put(mddev); return 0; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 37e4ff661b6..e14f4578072 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1105,7 +1105,7 @@ static void compute_parity6(struct stripe_head *sh, int method) if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) wake_up(&conf->wait_for_overlap); - if (sh->dev[i].written) BUG(); + BUG_ON(sh->dev[i].written); sh->dev[i].written = chosen; } break; diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig index b5cdd57ec6f..3d778c5aba6 100644 --- a/ |