diff options
Diffstat (limited to 'drivers')
46 files changed, 3680 insertions, 949 deletions
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c index f5002015d82..a22ffa5bff9 100644 --- a/drivers/cpufreq/db8500-cpufreq.c +++ b/drivers/cpufreq/db8500-cpufreq.c @@ -22,11 +22,11 @@ static struct cpufreq_frequency_table freq_table[] = { }, [1] = { .index = 1, - .frequency = 300000, + .frequency = 400000, }, [2] = { .index = 2, - .frequency = 600000, + .frequency = 800000, }, [3] = { /* Used for MAX_OPP, if available */ @@ -113,12 +113,9 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table)); - if (!prcmu_is_u8400()) { - freq_table[1].frequency = 400000; - freq_table[2].frequency = 800000; - if (prcmu_has_arm_maxopp()) - freq_table[3].frequency = 1000000; - } + if (prcmu_has_arm_maxopp()) + freq_table[3].frequency = 1000000; + pr_info("db8500-cpufreq : Available frequencies:\n"); for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) pr_info(" %d Mhz\n", freq_table[i].frequency/1000); diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c index 87a68a896ab..094c5c4fd7f 100644 --- a/drivers/gpio/gpio-stmpe.c +++ b/drivers/gpio/gpio-stmpe.c @@ -307,13 +307,11 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev) struct stmpe_gpio_platform_data *pdata; struct stmpe_gpio *stmpe_gpio; int ret; - int irq; + int irq = 0; pdata = stmpe->pdata->gpio; irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL); if (!stmpe_gpio) @@ -330,21 +328,28 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev) stmpe_gpio->chip.dev = &pdev->dev; stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1; - stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0); + if (irq >= 0) + stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0); + else + dev_info(&pdev->dev, + "device configured in no-irq mode; " + "irqs are not available\n"); ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO); if (ret) goto out_free; - ret = stmpe_gpio_irq_init(stmpe_gpio); - if (ret) - goto out_disable; + if (irq >= 0) { + ret = stmpe_gpio_irq_init(stmpe_gpio); + if (ret) + goto out_disable; - ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq, IRQF_ONESHOT, - "stmpe-gpio", stmpe_gpio); - if (ret) { - dev_err(&pdev->dev, "unable to get irq: %d\n", ret); - goto out_removeirq; + ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq, + IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio); + if (ret) { + dev_err(&pdev->dev, "unable to get irq: %d\n", ret); + goto out_removeirq; + } } ret = gpiochip_add(&stmpe_gpio->chip); @@ -361,9 +366,11 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev) return 0; out_freeirq: - free_irq(irq, stmpe_gpio); + if (irq >= 0) + free_irq(irq, stmpe_gpio); out_removeirq: - stmpe_gpio_irq_remove(stmpe_gpio); + if (irq >= 0) + stmpe_gpio_irq_remove(stmpe_gpio); out_disable: stmpe_disable(stmpe, STMPE_BLOCK_GPIO); out_free: @@ -391,8 +398,10 @@ static int __devexit stmpe_gpio_remove(struct platform_device *pdev) stmpe_disable(stmpe, STMPE_BLOCK_GPIO); - free_irq(irq, stmpe_gpio); - stmpe_gpio_irq_remove(stmpe_gpio); + if (irq >= 0) { + free_irq(irq, stmpe_gpio); + stmpe_gpio_irq_remove(stmpe_gpio); + } platform_set_drvdata(pdev, NULL); kfree(stmpe_gpio); diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index b8b4f228757..94256fe7bf3 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -32,6 +32,8 @@ #include <linux/irq.h> #include <linux/gpio.h> #include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/irqdomain.h> #include <linux/i2c/twl.h> @@ -256,7 +258,8 @@ static int twl_request(struct gpio_chip *chip, unsigned offset) * and vMMC2 power supplies based on card presence. */ pdata = chip->dev->platform_data; - value |= pdata->mmc_cd & 0x03; + if (pdata) + value |= pdata->mmc_cd & 0x03; status = gpio_twl4030_write(REG_GPIO_CTRL, value); } @@ -395,59 +398,70 @@ static int gpio_twl4030_remove(struct platform_device *pdev); static int __devinit gpio_twl4030_probe(struct platform_device *pdev) { struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; - int ret; + struct device_node *node = pdev->dev.of_node; + int ret, irq_base; /* maybe setup IRQs */ - if (pdata->irq_base) { - if (is_module()) { - dev_err(&pdev->dev, - "can't dispatch IRQs from modules\n"); - goto no_irqs; - } - ret = twl4030_sih_setup(TWL4030_MODULE_GPIO); - if (ret < 0) - return ret; - WARN_ON(ret != pdata->irq_base); - twl4030_gpio_irq_base = ret; + if (is_module()) { + dev_err(&pdev->dev, "can't dispatch IRQs from modules\n"); + goto no_irqs; + } + + irq_base = irq_alloc_descs(-1, 0, TWL4030_GPIO_MAX, 0); + if (irq_base < 0) { + dev_err(&pdev->dev, "Failed to alloc irq_descs\n"); + return irq_base; } + irq_domain_add_legacy(node, TWL4030_GPIO_MAX, irq_base, 0, + &irq_domain_simple_ops, NULL); + + ret = twl4030_sih_setup(&pdev->dev, TWL4030_MODULE_GPIO, irq_base); + if (ret < 0) + return ret; + + twl4030_gpio_irq_base = irq_base; + no_irqs: - /* - * NOTE: boards may waste power if they don't set pullups - * and pulldowns correctly ... default for non-ULPI pins is - * pulldown, and some other pins may have external pullups - * or pulldowns. Careful! - */ - ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); - if (ret) - dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", - pdata->pullups, pdata->pulldowns, - ret); - - ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); - if (ret) - dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", - pdata->debounce, pdata->mmc_cd, - ret); - - twl_gpiochip.base = pdata->gpio_base; + twl_gpiochip.base = -1; twl_gpiochip.ngpio = TWL4030_GPIO_MAX; twl_gpiochip.dev = &pdev->dev; - /* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, - * is (still) clear if use_leds is set. - */ - if (pdata->use_leds) - twl_gpiochip.ngpio += 2; + if (pdata) { + twl_gpiochip.base = pdata->gpio_base; + + /* + * NOTE: boards may waste power if they don't set pullups + * and pulldowns correctly ... default for non-ULPI pins is + * pulldown, and some other pins may have external pullups + * or pulldowns. Careful! + */ + ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); + if (ret) + dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", + pdata->pullups, pdata->pulldowns, + ret); + + ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); + if (ret) + dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", + pdata->debounce, pdata->mmc_cd, + ret); + + /* + * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, + * is (still) clear if use_leds is set. + */ + if (pdata->use_leds) + twl_gpiochip.ngpio += 2; + } ret = gpiochip_add(&twl_gpiochip); if (ret < 0) { - dev_err(&pdev->dev, - "could not register gpiochip, %d\n", - ret); + dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret); twl_gpiochip.ngpio = 0; gpio_twl4030_remove(pdev); - } else if (pdata->setup) { + } else if (pdata && pdata->setup) { int status; status = pdata->setup(&pdev->dev, @@ -465,7 +479,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev) struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; int status; - if (pdata->teardown) { + if (pdata && pdata->teardown) { status = pdata->teardown(&pdev->dev, pdata->gpio_base, TWL4030_GPIO_MAX); if (status) { @@ -486,12 +500,21 @@ static int gpio_twl4030_remove(struct platform_device *pdev) return -EIO; } +static const struct of_device_id twl_gpio_match[] = { + { .compatible = "ti,twl4030-gpio", }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl_gpio_match); + /* Note: this hardware lives inside an I2C-based multi-function device. */ MODULE_ALIAS("platform:twl4030_gpio"); static struct platform_driver gpio_twl4030_driver = { - .driver.name = "twl4030_gpio", - .driver.owner = THIS_MODULE, + .driver = { + .name = "twl4030_gpio", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl_gpio_match), + }, .probe = gpio_twl4030_probe, .remove = gpio_twl4030_remove, }; diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c index 6c6b240a782..ce86c5e3c2c 100644 --- a/drivers/hwmon/mc13783-adc.c +++ b/drivers/hwmon/mc13783-adc.c @@ -59,7 +59,7 @@ static int mc13783_adc_read(struct device *dev, ret = mc13xxx_adc_do_conversion(priv->mc13xxx, MC13XXX_ADC_MODE_MULT_CHAN, - channel, sample); + channel, 0, 0, sample); if (ret) return ret; diff --git a/drivers/input/misc/88pm860x_onkey.c b/drivers/input/misc/88pm860x_onkey.c index f2e0cbc5ab6..f9ce1835e4d 100644 --- a/drivers/input/misc/88pm860x_onkey.c +++ b/drivers/input/misc/88pm860x_onkey.c @@ -105,6 +105,8 @@ static int __devinit pm860x_onkey_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, info); + device_init_wakeup(&pdev->dev, 1); + return 0; out_irq: @@ -129,10 +131,34 @@ static int __devexit pm860x_onkey_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int pm860x_onkey_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag |= 1 << PM8607_IRQ_ONKEY; + return 0; +} +static int pm860x_onkey_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag &= ~(1 << PM8607_IRQ_ONKEY); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_onkey_pm_ops, pm860x_onkey_suspend, pm860x_onkey_resume); + static struct platform_driver pm860x_onkey_driver = { .driver = { .name = "88pm860x-onkey", .owner = THIS_MODULE, + .pm = &pm860x_onkey_pm_ops, }, .probe = pm860x_onkey_probe, .remove = __devexit_p(pm860x_onkey_remove), diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c index ede02743eac..48dc5b0d26f 100644 --- a/drivers/input/touchscreen/mc13783_ts.c +++ b/drivers/input/touchscreen/mc13783_ts.c @@ -39,6 +39,7 @@ struct mc13783_ts_priv { struct delayed_work work; struct workqueue_struct *workq; unsigned int sample[4]; + struct mc13xxx_ts_platform_data *touch; }; static irqreturn_t mc13783_ts_handler(int irq, void *data) @@ -125,7 +126,9 @@ static void mc13783_ts_work(struct work_struct *work) unsigned int channel = 12; if (mc13xxx_adc_do_conversion(priv->mc13xxx, - mode, channel, priv->sample) == 0) + mode, channel, + priv->touch->ato, priv->touch->atox, + priv->sample) == 0) mc13783_ts_report_sample(priv); } @@ -179,6 +182,12 @@ static int __init mc13783_ts_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&priv->work, mc13783_ts_work); priv->mc13xxx = dev_get_drvdata(pdev->dev.parent); priv->idev = idev; + priv->touch = dev_get_platdata(&pdev->dev); + if (!priv->touch) { + dev_err(&pdev->dev, "missing platform data\n"); + ret = -ENODEV; + goto err_free_mem; + } /* * We need separate workqueue because mc13783_adc_do_conversion diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c index 4ca00624bd1..5b61aaf7ac0 100644 --- a/drivers/leds/leds-88pm860x.c +++ b/drivers/leds/leds-88pm860x.c @@ -114,6 +114,27 @@ static inline int __blink_ctl_mask(int port) return ret; } +static int led_power_set(struct pm860x_chip *chip, int port, int on) +{ + int ret = -EINVAL; + + switch (port) { + case PM8606_LED1_RED: + case PM8606_LED1_GREEN: + case PM8606_LED1_BLUE: + ret = on ? pm8606_osc_enable(chip, RGB1_ENABLE) : + pm8606_osc_disable(chip, RGB1_ENABLE); + break; + case PM8606_LED2_RED: + case PM8606_LED2_GREEN: + case PM8606_LED2_BLUE: + ret = on ? pm8606_osc_enable(chip, RGB2_ENABLE) : + pm8606_osc_disable(chip, RGB2_ENABLE); + break; + } + return ret; +} + static void pm860x_led_work(struct work_struct *work) { @@ -126,6 +147,7 @@ static void pm860x_led_work(struct work_struct *work) chip = led->chip; mutex_lock(&led->lock); if ((led->current_brightness == 0) && led->brightness) { + led_power_set(chip, led->port, 1); if (led->iset) { pm860x_set_bits(led->i2c, __led_off(led->port), LED_CURRENT_MASK, led->iset); @@ -149,6 +171,7 @@ static void pm860x_led_work(struct work_struct *work) LED_CURRENT_MASK, 0); mask = __blink_ctl_mask(led->port); pm860x_set_bits(led->i2c, PM8606_WLED3B, mask, 0); + led_power_set(chip, led->port, 0); } } led->current_brightness = led->brightness; diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index 17dfe9bb6d2..87bd5ba38d5 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -503,6 +503,101 @@ static void device_irq_exit(struct pm860x_chip *chip) free_irq(chip->core_irq, chip); } +int pm8606_osc_enable(struct pm860x_chip *chip, unsigned short client) +{ + int ret = -EIO; + struct i2c_client *i2c = (chip->id == CHIP_PM8606) ? + chip->client : chip->companion; + + dev_dbg(chip->dev, "%s(B): client=0x%x\n", __func__, client); + dev_dbg(chip->dev, "%s(B): vote=0x%x status=%d\n", + __func__, chip->osc_vote, + chip->osc_status); + + mutex_lock(&chip->osc_lock); + /* Update voting status */ + chip->osc_vote |= client; + /* If reference group is off - turn on*/ + if (chip->osc_status != PM8606_REF_GP_OSC_ON) { + chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN; + /* Enable Reference group Vsys */ + if (pm860x_set_bits(i2c, PM8606_VSYS, + PM8606_VSYS_EN, PM8606_VSYS_EN)) + goto out; + + /*Enable Internal Oscillator */ + if (pm860x_set_bits(i2c, PM8606_MISC, + PM8606_MISC_OSC_EN, PM8606_MISC_OSC_EN)) + goto out; + /* Update status (only if writes succeed) */ + chip->osc_status = PM8606_REF_GP_OSC_ON; + } + mutex_unlock(&chip->osc_lock); + + dev_dbg(chip->dev, "%s(A): vote=0x%x status=%d ret=%d\n", + __func__, chip->osc_vote, + chip->osc_status, ret); + return 0; +out: + mutex_unlock(&chip->osc_lock); + return ret; +} +EXPORT_SYMBOL(pm8606_osc_enable); + +int pm8606_osc_disable(struct pm860x_chip *chip, unsigned short client) +{ + int ret = -EIO; + struct i2c_client *i2c = (chip->id == CHIP_PM8606) ? + chip->client : chip->companion; + + dev_dbg(chip->dev, "%s(B): client=0x%x\n", __func__, client); + dev_dbg(chip->dev, "%s(B): vote=0x%x status=%d\n", + __func__, chip->osc_vote, + chip->osc_status); + + mutex_lock(&chip->osc_lock); + /*Update voting status */ + chip->osc_vote &= ~(client); + /* If reference group is off and this is the last client to release + * - turn off */ + if ((chip->osc_status != PM8606_REF_GP_OSC_OFF) && + (chip->osc_vote == REF_GP_NO_CLIENTS)) { + chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN; + /* Disable Reference group Vsys */ + if (pm860x_set_bits(i2c, PM8606_VSYS, PM8606_VSYS_EN, 0)) + goto out; + /* Disable Internal Oscillator */ + if (pm860x_set_bits(i2c, PM8606_MISC, PM8606_MISC_OSC_EN, 0)) + goto out; + chip->osc_status = PM8606_REF_GP_OSC_OFF; + } + mutex_unlock(&chip->osc_lock); + + dev_dbg(chip->dev, "%s(A): vote=0x%x status=%d ret=%d\n", + __func__, chip->osc_vote, + chip->osc_status, ret); + return 0; +out: + mutex_unlock(&chip->osc_lock); + return ret; +} +EXPORT_SYMBOL(pm8606_osc_disable); + +static void __devinit device_osc_init(struct i2c_client *i2c) +{ + struct pm860x_chip *chip = i2c_get_clientdata(i2c); + + mutex_init(&chip->osc_lock); + /* init portofino reference group voting and status */ + /* Disable Reference group Vsys */ + pm860x_set_bits(i2c, PM8606_VSYS, PM8606_VSYS_EN, 0); + /* Disable Internal Oscillator */ + pm860x_set_bits(i2c, PM8606_MISC, PM8606_MISC_OSC_EN, 0); + + chip->osc_vote = REF_GP_NO_CLIENTS; + chip->osc_status = PM8606_REF_GP_OSC_OFF; +} + static void __devinit device_bk_init(struct pm860x_chip *chip, struct pm860x_platform_data *pdata) { @@ -767,6 +862,15 @@ out: return; } +static void __devinit device_8606_init(struct pm860x_chip *chip, + struct i2c_client *i2c, + struct pm860x_platform_data *pdata) +{ + device_osc_init(i2c); + device_bk_init(chip, pdata); + device_led_init(chip, pdata); +} + int __devinit pm860x_device_init(struct pm860x_chip *chip, struct pm860x_platform_data *pdata) { @@ -774,8 +878,7 @@ int __devinit pm860x_device_init(struct pm860x_chip *chip, switch (chip->id) { case CHIP_PM8606: - device_bk_init(chip, pdata); - device_led_init(chip, pdata); + device_8606_init(chip, chip->client, pdata); break; case CHIP_PM8607: device_8607_init(chip, chip->client, pdata); @@ -785,8 +888,7 @@ int __devinit pm860x_device_init(struct pm860x_chip *chip, if (chip->companion) { switch (chip->id) { case CHIP_PM8607: - device_bk_init(chip, pdata); - device_led_init(chip, pdata); + device_8606_init(chip, chip->companion, pdata); break; case CHIP_PM8606: device_8607_init(chip, chip->companion, pdata); diff --git a/drivers/mfd/88pm860x-i2c.c b/drivers/mfd/88pm860x-i2c.c index f93dd9571c3..b2cfdc45856 100644 --- a/drivers/mfd/88pm860x-i2c.c +++ b/drivers/mfd/88pm860x-i2c.c @@ -334,10 +334,35 @@ static int __devexit pm860x_remove(struct i2c_client *client) return 0; } +#ifdef CONFIG_PM_SLEEP +static int pm860x_suspend(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct pm860x_chip *chip = i2c_get_clientdata(client); + + if (device_may_wakeup(dev) && chip->wakeup_flag) + enable_irq_wake(chip->core_irq); + return 0; +} + +static int pm860x_resume(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct pm860x_chip *chip = i2c_get_clientdata(client); + + if (device_may_wakeup(dev) && chip->wakeup_flag) + disable_irq_wake(chip->core_irq); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_pm_ops, pm860x_suspend, pm860x_resume); + static struct i2c_driver pm860x_driver = { .driver = { .name = "88PM860x", .owner = THIS_MODULE, + .pm = &pm860x_pm_ops, }, .probe = pm860x_probe, .remove = __devexit_p(pm860x_remove), diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 243e0c663c3..29f463cc09c 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -143,6 +143,21 @@ config TPS6507X This driver can also be built as a module. If so, the module will be called tps6507x. +config MFD_TPS65217 + tristate "TPS65217 Power Management / White LED chips" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the TPS65217 series of + Power Management / White LED chips. + These include voltage regulators, lithium ion/polymer battery + charger, wled and other features that are often used in portable + devices. + + This driver can also be built as a module. If so, the module + will be called tps65217. + config MFD_TPS6586X bool "TPS6586x Power Management chips" depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS @@ -162,6 +177,7 @@ config MFD_TPS65910 depends on I2C=y && GPIOLIB select MFD_CORE select GPIO_TPS65910 + select REGMAP_I2C help if you say yes here you get support for the TPS65910 series of Power Management chips. @@ -171,7 +187,7 @@ config MFD_TPS65912 depends on GPIOLIB config MFD_TPS65912_I2C - bool "TPS95612 Power Management chip with I2C" + bool "TPS65912 Power Management chip with I2C" select MFD_CORE select MFD_TPS65912 depends on I2C=y && GPIOLIB @@ -400,7 +416,7 @@ config MFD_MAX8997 depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE help - Say yes here to support for Maxim Semiconductor MAX8998/8966. + Say yes here to support for Maxim Semiconductor MAX8997/8966. This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, MUIC controls on chip. This driver provides common support for accessing the device; @@ -812,6 +828,18 @@ config MFD_PM8XXX_IRQ config TPS65911_COMPARATOR tristate +config MFD_TPS65090 + bool "TPS65090 Power Management chips" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the TPS65090 series of + Power Management chips. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config MFD_AAT2870_CORE bool "Support for the AnalogicTech AAT2870" select MFD_CORE @@ -831,6 +859,28 @@ config MFD_INTEL_MSIC Passage) chip. This chip embeds audio, battery, GPIO, etc. devices used in Intel Medfield platforms. +config MFD_RC5T583 + bool "Ricoh RC5T583 Power Management system device" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + Select this option to get support for the RICOH583 Power + Management system device. + This driver provides common support for accessing the device + through i2c interface. The device supports multiple sub-devices + like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. + Additional drivers must be enabled in order to use the + different functionality of the device. + +config MFD_ANATOP + bool "Support for Freescale i.MX on-chip ANATOP controller" + depends on SOC_IMX6Q + help + Select this option to enable Freescale i.MX on-chip ANATOP + MFD controller. This controller embeds regulator and + thermal devices for Freescale i.MX platforms. + endmenu endif diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index b953bab934f..05fa538c5ef 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_MFD_WM8994) += wm8994-core.o wm8994-irq.o wm8994-regmap.o obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_TPS6507X) += tps6507x.o +obj-$(CONFIG_MFD_TPS65217) += tps65217.o obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o tps65912-objs := tps65912-core.o tps65912-irq.o obj-$(CONFIG_MFD_TPS65912) += tps65912.o @@ -109,6 +110,9 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o +obj-$(CONFIG_MFD_TPS65090) += tps65090.o obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o +obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_S5M_CORE) += s5m-core.o s5m-irq.o +obj-$(CONFIG_MFD_ANATOP) += anatop-mfd.o diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index d295941c9a3..1f08704f7ae 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -32,6 +32,7 @@ #define AB8500_IT_SOURCE6_REG 0x05 #define AB8500_IT_SOURCE7_REG 0x06 #define AB8500_IT_SOURCE8_REG 0x07 +#define AB9540_IT_SOURCE13_REG 0x0C #define AB8500_IT_SOURCE19_REG 0x12 #define AB8500_IT_SOURCE20_REG 0x13 #define AB8500_IT_SOURCE21_REG 0x14 @@ -53,6 +54,7 @@ #define AB8500_IT_LATCH9_REG 0x28 #define AB8500_IT_LATCH10_REG 0x29 #define AB8500_IT_LATCH12_REG 0x2B +#define AB9540_IT_LATCH13_REG 0x2C #define AB8500_IT_LATCH19_REG 0x32 #define AB8500_IT_LATCH20_REG 0x33 #define AB8500_IT_LATCH21_REG 0x34 @@ -90,21 +92,39 @@ #define AB8500_IT_MASK24_REG 0x57 #define AB8500_REV_REG 0x80 +#define AB8500_IC_NAME_REG 0x82 #define AB8500_SWITCH_OFF_STATUS 0x00 #define AB8500_TURN_ON_STATUS 0x00 +#define AB9540_MODEM_CTRL2_REG 0x23 +#define AB9540_MODEM_CTRL2_SWDBBRSTN_BIT BIT(2) + /* * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt - * numbers are indexed into this array with (num / 8). + * numbers are indexed into this array with (num / 8). The interupts are + * defined in linux/mfd/ab8500.h * * This is one off from the register names, i.e. AB8500_IT_MASK1_REG is at * offset 0. */ +/* AB8500 support */ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, }; +/* AB9540 support */ +static const int ab9540_irq_regoffset[AB9540_NUM_IRQ_REGS] = { + 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24, +}; + +static const char ab8500_version_str[][7] = { + [AB8500_VERSION_AB8500] = "AB8500", + [AB8500_VERSION_AB8505] = "AB8505", + [AB8500_VERSION_AB9540] = "AB9540", + [AB8500_VERSION_AB8540] = "AB8540", +}; + static int ab8500_get_chip_id(struct device *dev) { struct ab8500 *ab8500; @@ -127,9 +147,7 @@ static int set_register_interruptible(struct ab8500 *ab8500, u8 bank, dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data); - ret = mutex_lock_interruptible(&ab8500->lock); - if (ret) - return ret; + mutex_lock(&ab8500->lock); ret = ab8500->write(ab8500, addr, data); if (ret < 0) @@ -156,9 +174,7 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank, * bank on higher 8 bits and reg in lower */ u16 addr = ((u16)bank) << 8 | reg; - ret = mutex_lock_interruptible(&ab8500->lock); - if (ret) - return ret; + mutex_lock(&ab8500->lock); ret = ab8500->read(ab8500, addr); if (ret < 0) @@ -185,31 +201,38 @@ static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank, u8 reg, u8 bitmask, u8 bitvalues) { int ret; - u8 data; /* put the u8 bank and u8 reg together into a an u16. * bank on higher 8 bits and reg in lower */ u16 addr = ((u16)bank) << 8 | reg; - ret = mutex_lock_interruptible(&ab8500->lock); - if (ret) - return ret; + mutex_lock(&ab8500->lock); - ret = ab8500->read(ab8500, addr); - if (ret < 0) { - dev_err(ab8500->dev, "failed to read reg %#x: %d\n", - addr, ret); - goto out; - } + if (ab8500->write_masked == NULL) { + u8 data; - data = (u8)ret; - data = (~bitmask & data) | (bitmask & bitvalues); + ret = ab8500->read(ab8500, addr); + if (ret < 0) { + dev_err(ab8500->dev, "failed to read reg %#x: %d\n", + addr, ret); + goto out; + } - ret = ab8500->write(ab8500, addr, data); - if (ret < 0) - dev_err(ab8500->dev, "failed to write reg %#x: %d\n", - addr, ret); + data = (u8)ret; + data = (~bitmask & data) | (bitmask & bitvalues); + + ret = ab8500->write(ab8500, addr, data); + if (ret < 0) + dev_err(ab8500->dev, "failed to write reg %#x: %d\n", + addr, ret); - dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr, data); + dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr, + data); + goto out; + } + ret = ab8500->write_masked(ab8500, addr, bitmask, bitvalues); + if (ret < 0) + dev_err(ab8500->dev, "failed to modify reg %#x: %d\n", addr, + ret); out: mutex_unlock(&ab8500->lock); return ret; @@ -248,7 +271,7 @@ static void ab8500_irq_sync_unlock(struct irq_data *data) struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data); int i; - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { + for (i = 0; i < ab8500->mask_size; i++) { u8 old = ab8500->oldmask[i]; u8 new = ab8500->mask[i]; int reg; @@ -256,14 +279,17 @@ static void ab8500_irq_sync_unlock(struct irq_data *data) if (new == old) continue; - /* Interrupt register 12 doesn't exist prior to version 2.0 */ - if (ab8500_irq_regoffset[i] == 11 && - ab8500->chip_id < AB8500_CUT2P0) + /* + * Interrupt register 12 doesn't exist prior to AB8500 version + * 2.0 + */ + if (ab8500->irq_reg_offset[i] == 11 && + is_ab8500_1p1_or_earlier(ab8500)) continue; ab8500->oldmask[i] = new; - reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i]; + reg = AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i]; set_register_interruptible(ab8500, AB8500_INTERRUPT, reg, new); } @@ -306,13 +332,16 @@ static irqreturn_t ab8500_irq(int irq, void *dev) dev_vdbg(ab8500->dev, "interrupt\n"); - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { - int regoffset = ab8500_irq_regoffset[i]; + for (i = 0; i < ab8500->mask_size; i++) { + int regoffset = ab8500->irq_reg_offset[i]; int status; u8 value; - /* Interrupt register 12 doesn't exist prior to version 2.0 */ - if (regoffset == 11 && ab8500->chip_id < AB8500_CUT2P0) + /* + * Interrupt register 12 doesn't exist prior to AB8500 version + * 2.0 + */ + if (regoffset == 11 && is_ab8500_1p1_or_earlier(ab8500)) continue; status = get_register_interruptible(ab8500, AB8500_INTERRUPT, @@ -336,8 +365,16 @@ static int ab8500_irq_init(struct ab8500 *ab8500) { int base = ab8500->irq_base; int irq; + int num_irqs; + + if (is_ab9540(ab8500)) + num_irqs = AB9540_NR_IRQS; + else if (is_ab8505(ab8500)) + num_irqs = AB8505_NR_IRQS; + else + num_irqs = AB8500_NR_IRQS; - for (irq = base; irq < base + AB8500_NR_IRQS; irq++) { + for (irq = base; irq < base + num_irqs; irq++) { irq_set_chip_data(irq, ab8500); irq_set_chip_and_handler(irq, &ab8500_irq_chip, handle_simple_irq); @@ -356,8 +393,16 @@ static void ab8500_irq_remove(struct ab8500 *ab8500) { int base = ab8500->irq_base; int irq; + int num_irqs; - for (irq = base; irq < base + AB8500_NR_IRQS; irq++) { + if (is_ab9540(ab8500)) + num_irqs = AB9540_NR_IRQS; + else if (is_ab8505(ab8500)) + num_irqs = AB8505_NR_IRQS; + else + num_irqs = AB8500_NR_IRQS; + + for (irq = base; irq < base + num_irqs; irq++) { #ifdef CONFIG_ARM set_irq_flags(irq, 0); #endif @@ -366,6 +411,7 @@ static void ab8500_irq_remove(struct ab8500 *ab8500) } } +/* AB8500 GPIO Resources */ static struct resource __devinitdata ab8500_gpio_resources[] = { { .name = "GPIO_INT6", @@ -375,6 +421,28 @@ static struct resource __devinitdata ab8500_gpio_resources[] = { } }; +/* AB9540 GPIO Resources */ +static struct resource __devinitdata ab9540_gpio_resources[] = { + { + .name = "GPIO_INT6", + .start = AB8500_INT_GPIO6R, + .end = AB8500_INT_GPIO41F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "GPIO_INT14", + .start = AB9540_INT_GPIO50R, + .end = AB9540_INT_GPIO54R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "GPIO_INT15", + .start = AB9540_INT_GPIO50F, + .end = AB9540_INT_GPIO54F, + .flags = IORESOURCE_IRQ, + } +}; + static struct resource __devinitdata ab8500_gpadc_resources[] = { { .name = "HW_CONV_END", @@ -491,12 +559,6 @@ static struct resource __devinitdata ab8500_charger_resources[] = { .flags = IORESOURCE_IRQ, }, { - .name = "USB_CHARGE_DET_DONE", - .start = AB8500_INT_USB_CHG_DET_DONE, - .end = AB8500_INT_USB_CHG_DET_DONE, - .flags = IORESOURCE_IRQ, - }, - { .name = "VBUS_OVV", .start = AB8500_INT_VBUS_OVV, .end = AB8500_INT_VBUS_OVV, @@ -534,14 +596,8 @@ static struct resource __devinitdata ab8500_charger_resources[] = { }, { .name = "USB_CHARGER_NOT_OKR", - .start = AB8500_INT_USB_CHARGER_NOT_OK, - .end = AB8500_INT_USB_CHARGER_NOT_OK, - .flags = IORESOURCE_IRQ, - }, - { - .name = "USB_CHARGER_NOT_OKF", - .start = AB8500_INT_USB_CHARGER_NOT_OKF, - .end = AB8500_INT_USB_CHARGER_NOT_OKF, + .start = AB8500_INT_USB_CHARGER_NOT_OKR, + .end = AB8500_INT_USB_CHARGER_NOT_OKR, .flags = IORESOURCE_IRQ, }, { @@ -616,6 +672,12 @@ static struct resource __devinitdata ab8500_fg_resources[] = { .end = AB8500_INT_CC_INT_CALIB, .flags = IORESOURCE_IRQ, }, + { + .name = "CCEOC", + .start = AB8500_INT_CCEOC, + .end = AB8500_INT_CCEOC, + .flags = IORESOURCE_IRQ, + }, }; static struct resource __devinitdata ab8500_chargalg_resources[] = {}; @@ -630,8 +692,8 @@ static struct resource __devinitdata ab8500_debug_resources[] = { }, { .name = "IRQ_LAST", - .start = AB8500_INT_USB_CHARGER_NOT_OKF, - .end = AB8500_INT_USB_CHARGER_NOT_OKF, + .start = AB8500_INT_XTAL32K_KO, + .end = AB8500_INT_XTAL32K_KO, .flags = IORESOURCE_IRQ, }, }; @@ -691,7 +753,7 @@ static struct resource __devinitdata ab8500_temp_resources[] = { }, }; -static struct mfd_cell __devinitdata ab8500_devs[] = { +static struct mfd_cell __devinitdata abx500_common_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", @@ -706,11 +768,6 @@ static struct mfd_cell __devinitdata ab8500_devs[] = { .name = "ab8500-regulator", }, { - .name = "ab8500-gpio", - .num_resources = ARRAY_SIZE(ab8500_gpio_resources), - .resources = ab8500_gpio_resources, - }, - { .name = "ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), .resources = ab8500_gpadc_resources, @@ -748,11 +805,7 @@ static struct mfd_cell __devinitdata ab8500_devs[] = { { .name = "ab8500-codec", }, - { - .name = "ab8500-usb", - .num_resources = ARRAY_SIZE(ab8500_usb_resources), - .resources = ab8500_usb_resources, - }, + { .name = "ab8500-poweron-key", .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), @@ -781,6 +834,32 @@ static struct mfd_cell __devinitdata ab8500_devs[] = { }, }; +static struct mfd_cell __devinitdata ab8500_devs[] = { + { + .name = "ab8500-gpio", + .num_resources = ARRAY_SIZE(ab8500_gpio_resources), + .resources = ab8500_gpio_resources, + }, + { + .name = "ab8500-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, + }, +}; + +static struct mfd_cell __devinitdata ab9540_devs[] = { + { + .name = "ab8500-gpio", + .num_resources = ARRAY_SIZE(ab9540_gpio_resources), + .resources = ab9540_gpio_resources, + }, + { + .name = "ab9540-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, + }, +}; + static ssize_t show_chip_id(struct device *dev, struct device_attribute *attr, char *buf) { @@ -842,9 +921,64 @@ static ssize_t show_turn_on_status(struct device *dev, return sprintf(buf, "%#x\n", value); } +static ssize_t show_ab9540_dbbrstn(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ab8500 *ab8500; + int ret; + u8 value; + + ab8500 = dev_get_drvdata(dev); + + ret = get_register_interruptible(ab8500, AB8500_REGU_CTRL2, + AB9540_MODEM_CTRL2_REG, &value); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", + (value & AB9540_MODEM_CTRL2_SWDBBRSTN_BIT) ? 1 : 0); +} + +static ssize_t store_ab9540_dbbrstn(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct ab8500 *ab8500; + int ret = count; + int err; + u8 bitvalues; + + ab8500 = dev_get_drvdata(dev); + + if (count > 0) { + switch (buf[0]) { + case '0': + bitvalues = 0; + break; + case '1': + bitvalues = AB9540_MODEM_CTRL2_SWDBBRSTN_BIT; + break; + default: + goto exit; + } + + err = mask_and_set_register_interruptible(ab8500, + AB8500_REGU_CTRL2, AB9540_MODEM_CTRL2_REG, + AB9540_MODEM_CTRL2_SWDBBRSTN_BIT, bitvalues); + if (err) + dev_info(ab8500->dev, + "Failed to set DBBRSTN %c, err %#x\n", + buf[0], err); + } + +exit: + return ret; +} + static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL); static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL); static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL); +static DEVICE_ATTR(dbbrstn, S_IRUGO | S_IWUSR, + show_ab9540_dbbrstn, store_ab9540_dbbrstn); static struct attribute *ab8500_sysfs_entries[] = { &dev_attr_chip_id.attr, @@ -853,11 +987,23 @@ static struct attribute *ab8500_sysfs_entries[] = { NULL, }; +static struct attribute *ab9540_sysfs_entries[] = { + &dev_attr_chip_id.attr, + &dev_attr_switch_off_status.attr, + &dev_attr_turn_on_status.attr, + &dev_attr_dbbrstn.attr, + NULL, +}; + static struct attribute_group ab8500_attr_group = { .attrs = ab8500_sysfs_entries, }; -int __devinit ab8500_init(struct ab8500 *ab8500) +static struct attribute_group ab9540_attr_group = { + .attrs = ab9540_sysfs_entries, +}; + +int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version) { struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev); int ret; @@ -870,25 +1016,45 @@ int __devinit ab8500_init(struct ab8500 *ab8500) mutex_init(&ab8500->lock); mutex_init(&ab8500->irq_lock); + if (version != AB8500_VERSION_UNDEFINED) + ab8500->version = version; + else { + ret = get_register_interruptible(ab8500, AB8500_MISC, + AB8500_IC_NAME_REG, &value); + if (ret < 0) + return ret; + + ab8500->version = value; + } + ret = get_register_interruptible(ab8500, AB8500_MISC, AB8500_REV_REG, &value); if (ret < 0) return ret; - switch (value) { - case AB8500_CUT1P0: - case AB8500_CUT1P1: - case AB8500_CUT2P0: - case AB8500_CUT3P0: - case AB8500_CUT3P3: - dev_info(ab8500->dev, "detected chip, revision: %#x\n", value); - break; - default: - dev_err(ab8500->dev, "unknown chip, revision: %#x\n", value); - return -EINVAL; - } ab8500->chip_id = value; + dev_info(ab8500->dev, "detected chip, %s rev. %1x.%1x\n", + ab8500_version_str[ab8500->version], + ab8500->chip_id >> 4, + ab8500->chip_id & 0x0F); + + /* Configure AB8500 or AB9540 IRQ */ + if (is_ab9540(ab8500) || is_ab8505(ab8500)) { + ab8500->mask_size = AB9540_NUM_IRQ_REGS; + ab8500->irq_reg_offset = ab9540_irq_regoffset; + } else { + ab8500->mask_size = AB8500_NUM_IRQ_REGS; + ab8500->irq_reg_offset = ab8500_irq_regoffset; + } + ab8500->mask = kzalloc(ab8500->mask_size, GFP_KERNEL); + if (!ab8500->mask) + return -ENOMEM; + ab8500->oldmask = kzalloc(ab8500->mask_size, GFP_KERNEL); + if (!ab8500->oldmask) { + ret = -ENOMEM; + goto out_freemask; + } /* * ab8500 has switched off due to (SWITCH_OFF_STATUS): * 0x01 Swoff bit programming @@ -911,30 +1077,33 @@ int __devinit ab8500_init(struct ab8500 *ab8500) plat->init(ab8500); /* Clear and mask all interrupts */ - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { - /* Interrupt register 12 doesn't exist prior to version 2.0 */ - if (ab8500_irq_regoffset[i] == 11 && - ab8500->chip_id < AB8500_CUT2P0) + for (i = 0; i < ab8500->mask_size; i++) { + /* + * Interrupt register 12 doesn't exist prior to AB8500 version + * 2.0 + */ + if (ab8500->irq_reg_offset[i] == 11 && + is_ab8500_1p1_or_earlier(ab8500)) continue; get_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_LATCH1_REG + ab8500_irq_regoffset[i], + AB8500_IT_LATCH1_REG + ab8500->irq_reg_offset[i], &value); set_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i], 0xff); + AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i], 0xff); } ret = abx500_register_ops(ab8500->dev, &ab8500_ops); if (ret) - return ret; + goto out_freeoldmask; - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) + for (i = 0; i < ab8500->mask_size; i++) ab8500->mask[i] = ab8500->oldmask[i] = 0xff; if (ab8500->irq_base) { ret = ab8500_irq_init(ab8500); if (ret) - return ret; + goto out_freeoldmask; ret = request_threaded_irq(ab8500->irq, NULL, ab8500_irq, IRQF_ONESHOT | IRQF_NO_SUSPEND, @@ -943,17 +1112,34 @@ int __devinit ab8500_init(struct ab8500 *ab8500) goto out_removeirq; } - ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs, - ARRAY_SIZE(ab8500_devs), NULL, + ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs, + ARRAY_SIZE(abx500_common_devs), NULL, ab8500->irq_base); + if (ret) goto out_freeirq; - ret = sysfs_create_group(&ab8500->dev->kobj, &ab8500_attr_group); + if (is_ab9540(ab8500)) + ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, + ARRAY_SIZE(ab9540_devs), NULL, + ab8500->irq_base); + else + ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs, + ARRAY_SIZE(ab9540_devs), NULL, + ab8500->irq_base); if (ret) - dev_err(ab8500->dev, "error creating sysfs entries\n"); + goto out_freeirq; - return ret; + if (is_ab9540(ab8500)) + ret = sysfs_create_group(&ab8500->dev->kobj, + &ab9540_attr_group); + else + ret = sysfs_create_group(&ab8500->dev->kobj, + &ab8500_attr_group); + if (ret) + dev_err(ab8500->dev, "error creating sysfs entries\n"); + else + return ret; out_freeirq: if (ab8500->irq_base) @@ -961,18 +1147,27 @@ out_freeirq: out_removeirq: if (ab8500->irq_base) ab8500_irq_remove(ab8500); +out_freeoldmask: + kfree(ab8500->oldmask); +out_freemask: + kfree(ab8500->mask); return ret; } int __devexit ab8500_exit(struct ab8500 *ab8500) { - sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group); + if (is_ab9540(ab8500)) + sysfs_remove_group(&ab8500->dev->kobj, &ab9540_attr_group); + else + sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group); mfd_remove_devices(ab8500->dev); if (ab8500->irq_base) { free_irq(ab8500->irq, ab8500); ab8500_irq_remove(ab8500); } + kfree(ab8500->oldmask); + kfree(ab8500->mask); return 0; } diff --git a/drivers/mfd/ab8500-i2c.c b/drivers/mfd/ab8500-i2c.c index 087fecd71ce..b83045f102b 100644 --- a/drivers/mfd/ab8500-i2c.c +++ b/drivers/mfd/ab8500-i2c.c @@ -11,7 +11,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/mfd/abx500/ab8500.h> -#include <linux/mfd/db8500-prcmu.h> +#include <linux/mfd/dbx500-prcmu.h> static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data) { @@ -23,6 +23,18 @@ static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data) return ret; } +static int ab8500_i2c_write_masked(struct ab8500 *ab8500, u16 addr, u8 mask, + u8 data) +{ + int ret; + + ret = prcmu_abb_write_masked((u8)(addr >> 8), (u8)(addr & 0xFF), &data, + &mask, 1); + if (ret < 0) + dev_err(ab8500->dev, "prcmu i2c error %d\n", ret); + return ret; +} + static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr) { int ret; @@ -38,6 +50,7 @@ static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr) static int __devinit ab8500_i2c_probe(struct platform_device *plf) { + const struct platform_device_id *platid = platform_get_device_id(plf); struct ab8500 *ab8500; struct resource *resource; int ret; @@ -58,13 +71,15 @@ static int __devinit ab8500_i2c_probe(struct platform_device *plf) ab8500->read = ab8500_i2c_read; ab8500->write = ab8500_i2c_write; + ab8500->write_masked = ab8500_i2c_write_masked; platform_set_drvdata(plf, ab8500); - ret = ab8500_init(ab8500); + ret = ab8500_init(ab8500, platid->driver_data); if (ret) kfree(ab8500); + return ret; } @@ -78,13 +93,22 @@ static int __devexit ab8500_i2c_remove(struct platform_device *plf) return 0; } +static const struct platform_device_id ab8500_id[] = { + { "ab8500-i2c", AB8500_VERSION_AB8500 }, + { "ab8505-i2c", AB8500_VERSION_AB8505 }, + { "ab9540-i2c", AB8500_VERSION_AB9540 }, + { "ab8540-i2c", AB8500_VERSION_AB8540 }, + { } +}; + static struct platform_driver ab8500_i2c_driver = { .driver = { .name = "ab8500-i2c", .owner = THIS_MODULE, }, .probe = ab8500_i2c_probe, - .remove = __devexit_p(ab8500_i2c_remove) + .remove = __devexit_p(ab8500_i2c_remove), + .id_table = ab8500_id, }; static int __init ab8500_i2c_init(void) diff --git a/drivers/mfd/anatop-mfd.c b/drivers/mfd/anatop-mfd.c new file mode 100644 index 00000000000..2af42480635 --- /dev/null +++ b/drivers/mfd/anatop-mfd.c @@ -0,0 +1,137 @@ +/* + * Anatop MFD driver + * + * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> + * Copyright (C) 2012 Linaro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/mfd/anatop.h> + +u32 anatop_get_bits(struct anatop *adata, u32 addr, int bit_shift, + int bit_width) +{ + u32 val, mask; + + if (bit_width == 32) + mask = ~0; + else + mask = (1 << bit_width) - 1; + + val = readl(adata->ioreg + addr); + val = (val >> bit_shift) & mask; + + return val; +} +EXPORT_SYMBOL_GPL(anatop_get_bits); + +void anatop_set_bits(struct anatop *adata, u32 addr, int bit_shift, + int bit_width, u32 data) +{ + u32 val, mask; + + if (bit_width == 32) + mask = ~0; + else + mask = (1 << bit_width) - 1; + + spin_lock(&adata->reglock); + val = readl(adata->ioreg + addr) & ~(mask << bit_shift); + writel((data << bit_shift) | val, adata->ioreg + addr); + spin_unlock(&adata->reglock); +} +EXPORT_SYMBOL_GPL(anatop_set_bits); + +static const struct of_device_id of_anatop_match[] = { + { .compatible = "fsl,imx6q-anatop", }, + { }, +}; + +static int __devinit of_anatop_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + void *ioreg; + struct anatop *drvdata; + + ioreg = of_iomap(np, 0); + if (!ioreg) + return -EADDRNOTAVAIL; + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + drvdata->ioreg = ioreg; + spin_lock_init(&drvdata->reglock); + platform_set_drvdata(pdev, drvdata); + of_platform_populate(np, of_anatop_match, NULL, dev); + + return 0; +} + +static int __devexit of_anatop_remove(struct platform_device *pdev) +{ + struct anatop *drvdata; + drvdata = platform_get_drvdata(pdev); + iounmap(drvdata->ioreg); + + return 0; +} + +static struct platform_driver anatop_of_driver = { + .driver = { + .name = "anatop-mfd", + .owner = THIS_MODULE, + .of_match_table = of_anatop_match, + }, + .probe = of_anatop_probe, + .remove = of_anatop_remove, +}; + +static int __init anatop_init(void) +{ + return platform_driver_register(&anatop_of_driver); +} +postcore_initcall(anatop_init); + +static void __exit anatop_exit(void) +{ + platform_driver_unregister(&anatop_of_driver); +} +module_exit(anatop_exit); + +MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>"); +MODULE_DESCRIPTION("ANATOP MFD driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index b85bbd7f0d1..1895cf9fab8 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -525,6 +525,11 @@ static void asic3_gpio_set(struct gpio_chip *chip, return; } +static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return (offset < ASIC3_NUM_GPIOS) ? IRQ_BOARD_START + offset : -ENXIO; +} + static __init int asic3_gpio_probe(struct platform_device *pdev, u16 *gpio_config, int num) { @@ -976,6 +981,7 @@ static int __init asic3_probe(struct platform_device *pdev) asic->gpio.set = asic3_gpio_set; asic->gpio.direction_input = asic3_gpio_direction_input; asic->gpio.direction_output = asic3_gpio_direction_output; + asic->gpio.to_irq = asic3_gpio_to_irq; ret = asic3_gpio_probe(pdev, pdata->gpio_config, diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c index 5ddde2a9176..7ff313fe9fb 100644 --- a/drivers/mfd/da9052-core.c +++ b/drivers/mfd/da9052-core.c @@ -16,7 +16,6 @@ #include <linux/input.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/mutex.h> #include <linux/mfd/core.h> #include <linux/slab.h> #include <linux/module.h> @@ -647,8 +646,6 @@ int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id) struct irq_desc *desc; int ret; - mutex_init(&da9052->io_lock); - if (pdata && pdata->init != NULL) pdata->init(da9052); diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c index 44b97c70a61..36b88e39549 100644 --- a/drivers/mfd/da9052-i2c.c +++ b/drivers/mfd/da9052-i2c.c @@ -74,24 +74,27 @@ static int __devinit da9052_i2c_probe(struct i2c_client *client, ret = da9052_i2c_enable_multiwrite(da9052); if (ret < 0) - goto err; + goto err_regmap; ret = da9052_device_init(da9052, id->driver_data); if (ret != 0) - goto err; + goto err_regmap; return 0; +err_regmap: + regmap_exit(da9052->regmap); err: kfree(da9052); return ret; } -static int da9052_i2c_remove(struct i2c_client *client) +static int __devexit da9052_i2c_remove(struct i2c_client *client) { struct da9052 *da9052 = i2c_get_clientdata(client); da9052_device_exit(da9052); + regmap_exit(da9052->regmap); kfree(da9052); return 0; @@ -107,7 +110,7 @@ static struct i2c_device_id da9052_i2c_id[] = { static struct i2c_driver da9052_i2c_driver = { .probe = da9052_i2c_probe, - .remove = da9052_i2c_remove, + .remove = __devexit_p(da9052_i2c_remove), .id_table = da9052_i2c_id, .driver = { .name = "da9052", diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c index cdbc7cad326..6faf149e8d9 100644 --- a/drivers/mfd/da9052-spi.c +++ b/drivers/mfd/da9052-spi.c @@ -21,7 +21,7 @@ #include <linux/mfd/da9052/da9052.h> -static int da9052_spi_probe(struct spi_device *spi) +static int __devinit da9052_spi_probe(struct spi_device *spi) { int ret; const struct spi_device_id *id = spi_get_device_id(spi); @@ -52,20 +52,23 @@ static int da9052_spi_probe(struct spi_device *spi) ret = da9052_device_init(da9052, id->driver_data); if (ret != 0) - goto err; + goto err_regmap; return 0; +err_regmap: + regmap_exit(da9052->regmap); err: kfree(da9052); return ret; } -static int da9052_spi_remove(struct spi_device *spi) +static int __devexit da9052_spi_remove(struct spi_device *spi) { struct da9052 *da9052 = dev_get_drvdata(&spi->dev); da9052_device_exit(da9052); + regmap_exit(da9052->regmap); kfree(da9052); return 0; diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index af8e0efedbe..ebc1e865822 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -30,6 +30,7 @@ #include <linux/mfd/dbx500-prcmu.h> #include <linux/regulator/db8500-prcmu.h> #include <linux/regulator/machine.h> +#include <asm/hardware/gic.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/db8500-regs.h> @@ -39,11 +40,6 @@ /* Offset for the firmware version within the TCPM */ #define PRCMU_FW_VERSION_OFFSET 0xA4 -/* PRCMU project numbers, defined by PRCMU FW */ -#define PRCMU_PROJECT_ID_8500V1_0 1 -#define PRCMU_PROJECT_ID_8500V2_0 2 -#define PRCMU_PROJECT_ID_8400V2_0 3 - /* Index of different voltages to be used when accessing AVSData */ #define PRCM_AVS_BASE 0x2FC #define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0) @@ -137,6 +133,8 @@ #define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0) #define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1) #define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4) +#define PLL_SOC0_OFF 0x1 +#define PLL_SOC0_ON 0x2 #define PLL_SOC1_OFF 0x4 #define PLL_SOC1_ON 0x8 @@ -266,6 +264,11 @@ #define WAKEUP_BIT_GPIO7 BIT(30) #define WAKEUP_BIT_GPIO8 BIT(31) +static struct { + bool valid; + struct prcmu_fw_version version; +} fw_info; + /* * This vector maps irq numbers to the bits in the bit field used in * communication with the PRCMU firmware. @@ -341,11 +344,13 @@ static struct { * mb1_transfer - state needed for mailbox 1 communication. * @lock: The transaction lock. * @work: The transaction completion structure. + * @ape_opp: The current APE OPP. * @ack: Reply ("acknowledge") data. */ static struct { struct mutex lock; struct completion work; + u8 ape_opp; struct { u8 header; u8 arm_opp; @@ -413,79 +418,102 @@ static struct { static atomic_t ac_wake_req_state = ATOMIC_INIT(0); /* Spinlocks */ +static DEFINE_SPINLOCK(prcmu_lock); static DEFINE_SPINLOCK(clkout_lock); -static DEFINE_SPINLOCK(gpiocr_lock); /* Global var to runtime determine TCDM base for v2 or v1 */ static __iomem void *tcdm_base; struct clk_mgt { - unsigned int offset; + void __iomem *reg; u32 pllsw; + int branch; + bool clk38div; +}; + +enum { + PLL_RAW, + PLL_FIX, + PLL_DIV }; static DEFINE_SPINLOCK(clk_mgt_lock); -#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 } +#define CLK_MGT_ENTRY(_name, _branch, _clk38div)[PRCMU_##_name] = \ + { (PRCM_##_name##_MGT), 0 , _branch, _clk38div} struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { - CLK_MGT_ENTRY(SGACLK), - CLK_MGT_ENTRY(UARTCLK), - CLK_MGT_ENTRY(MSP02CLK), - CLK_MGT_ENTRY(MSP1CLK), - CLK_MGT_ENTRY(I2CCLK), - CLK_MGT_ENTRY(SDMMCCLK), - CLK_MGT_ENTRY(SLIMCLK), - CLK_MGT_ENTRY(PER1CLK), - CLK_MGT_ENTRY(PER2CLK), - CLK_MGT_ENTRY(PER3CLK), - CLK_MGT_ENTRY(PER5CLK), - CLK_MGT_ENTRY(PER6CLK), - CLK_MGT_ENTRY(PER7CLK), - CLK_MGT_ENTRY(LCDCLK), - CLK_MGT_ENTRY(BMLCLK), - CLK_MGT_ENTRY(HSITXCLK), - CLK_MGT_ENTRY(HSIRXCLK), - CLK_MGT_ENTRY(HDMICLK), - CLK_MGT_ENTRY(APEATCLK), - CLK_MGT_ENTRY(APETRACECLK), - CLK_MGT_ENTRY(MCDECLK), - CLK_MGT_ENTRY(IPI2CCLK), - CLK_MGT_ENTRY(DSIALTCLK), - CLK_MGT_ENTRY(DMACLK), - CLK_MGT_ENTRY(B2R2CLK), - CLK_MGT_ENTRY(TVCLK), - CLK_MGT_ENTRY(SSPCLK), - CLK_MGT_ENTRY(RNGCLK), - CLK_MGT_ENTRY(UICCCLK), + CLK_MGT_ENTRY(SGACLK, PLL_DIV, false), + CLK_MGT_ENTRY(UARTCLK, PLL_FIX, true), + CLK_MGT_ENTRY(MSP02CLK, PLL_FIX, true), + CLK_MGT_ENTRY(MSP1CLK, PLL_FIX, true), + CLK_MGT_ENTRY(I2CCLK, PLL_FIX, true), + CLK_MGT_ENTRY(SDMMCCLK, PLL_DIV, true), + CLK_MGT_ENTRY(SLIMCLK, PLL_FIX, true), + CLK_MGT_ENTRY(PER1CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER2CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER3CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER5CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true), + CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true), + CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true), + CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true), + CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true), + CLK_MGT_ENTRY(HDMICLK, PLL_FIX, false), + CLK_MGT_ENTRY(APEATCLK, PLL_DIV, true), + CLK_MGT_ENTRY(APETRACECLK, PLL_DIV, true), + CLK_MGT_ENTRY(MCDECLK, PLL_DIV, true), + CLK_MGT_ENTRY(IPI2CCLK, PLL_FIX, true), + CLK_MGT_ENTRY(DSIALTCLK, PLL_FIX, false), + CLK_MGT_ENTRY(DMACLK, PLL_DIV, true), + CLK_MGT_ENTRY(B2R2CLK, PLL_DIV, true), + CLK_MGT_ENTRY(TVCLK, PLL_FIX, true), + CLK_MGT_ENTRY(SSPCLK, PLL_FIX, true), + CLK_MGT_ENTRY(RNGCLK, PLL_FIX, true), + CLK_MGT_ENTRY(UICCCLK, PLL_FIX, false), +}; + +struct dsiclk { + u32 divsel_mask; + u32 divsel_shift; + u32 divsel; +}; + +static struct dsiclk dsiclk[2] = { + { + .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK, + .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT, + .divsel = PRCM_DSI_PLLOUT_SEL_PHI, + }, + { + .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK, + .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT, + .divsel = PRCM_DSI_PLLOUT_SEL_PHI, + } }; -static struct regulator *hwacc_regulator[NUM_HW_ACC]; -static struct regulator *hwacc_ret_regulator[NUM_HW_ACC]; - -static bool hwacc_enabled[NUM_HW_ACC]; -static bool hwacc_ret_enabled[NUM_HW_ACC]; - -static const char *hwacc_regulator_name[NUM_HW_ACC] = { - [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp", - [HW_ACC_SVAPIPE] = "hwacc-sva-pipe", - [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp", - [HW_ACC_SIAPIPE] = "hwacc-sia-pipe", - [HW_ACC_SGA] = "hwacc-sga", - [HW_ACC_B2R2] = "hwacc-b2r2", - [HW_ACC_MCDE] = "hwacc-mcde", - [HW_ACC_ESRAM1] = "hwacc-esram1", - [HW_ACC_ESRAM2] = "hwacc-esram2", - [HW_ACC_ESRAM3] = "hwacc-esram3", - [HW_ACC_ESRAM4] = "hwacc-esram4", +struct dsiescclk { + u32 en; + u32 div_mask; + u32 div_shift; }; -static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { - [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp-ret", - [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp-ret", - [HW_ACC_ESRAM1] = "hwacc-esram1-ret", - [HW_ACC_ESRAM2] = "hwacc-esram2-ret", - [HW_ACC_ESRAM3] = "hwacc-esram3-ret", - [HW_ACC_ESRAM4] = "hwacc-esram4-ret", +static struct dsiescclk dsiescclk[3] = { + { + .en = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN, + .div_mask = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK, + .div_shift = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT, + }, + { + .en = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN, + .div_mask = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK, + .div_shift = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT, + }, + { + .en = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN, + .div_mask = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK, + .div_shift = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT, + } }; /* @@ -503,9 +531,6 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { /* PLLDIV=12, PLLSW=4 (PLLDDR) */ #define PRCMU_DSI_CLOCK_SETTING 0x0000008C -/* PLLDIV=8, PLLSW=4 (PLLDDR) */ -#define PRCMU_DSI_CLOCK_SETTING_U8400 0x00000088 - /* DPI 50000000 Hz */ #define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \ (16 << PRCMU_CLK_PLL_DIV_SHIFT)) @@ -514,9 +539,6 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { /* D=101, N=1, R=4, SELDIV2=0 */ #define PRCMU_PLLDSI_FREQ_SETTING 0x00040165 -/* D=70, N=1, R=3, SELDIV2=0 */ -#define PRCMU_PLLDSI_FREQ_SETTING_U8400 0x00030146 - #define PRCMU_ENABLE_PLLDSI 0x00000001 #define PRCMU_DISABLE_PLLDSI 0x00000000 #define PRCMU_RELEASE_RESET_DSS 0x0000400C @@ -528,30 +550,17 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { #define PRCMU_PLLDSI_LOCKP_LOCKED 0x3 -static struct { - u8 project_number; - u8 api_version; - u8 func_version; - u8 errata; -} prcmu_version; - - int db8500_prcmu_enable_dsipll(void) { int i; - unsigned int plldsifreq; /* Clear DSIPLL_RESETN */ writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR); /* Unclamp DSIPLL in/out */ writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR); - if (prcmu_is_u8400()) - plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400; - else - plldsifreq = PRCMU_PLLDSI_FREQ_SETTING; /* Set DSI PLL FREQ */ - writel(plldsifreq, PRCM_PLLDSI_FREQ); + writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ); writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL); /* Enable Escape clocks */ writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV); @@ -583,12 +592,6 @@ int db8500_prcmu_disable_dsipll(void) int db8500_prcmu_set_display_clocks(void) { unsigned long flags; - unsigned int dsiclk; - - if (prcmu_is_u8400()) - dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400; - else - dsiclk = PRCMU_DSI_CLOCK_SETTING; spin_lock_irqsave(&clk_mgt_lock, flags); @@ -596,7 +599,7 @@ int db8500_prcmu_set_display_clocks(void) while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) cpu_relax(); - writel(dsiclk, PRCM_HDMICLK_MGT); + writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT); writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT); writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT); @@ -608,43 +611,41 @@ int db8500_prcmu_set_display_clocks(void) return 0; } -/** - * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1. - */ -void prcmu_enable_spi2(void) +u32 db8500_prcmu_read(unsigned int reg) +{ + return readl(_PRCMU_BASE + reg); +} + +void db8500_prcmu_write(unsigned int reg, u32 value) { - u32 reg; unsigned long flags; - spin_lock_irqsave(&gpiocr_lock, flags); - reg = readl(PRCM_GPIOCR); - writel(reg | PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR); - spin_unlock_irqrestore(&gpiocr_lock, flags); + spin_lock_irqsave(&prcmu_lock, flags); + writel(value, (_PRCMU_BASE + reg)); + spin_unlock_irqrestore(&prcmu_lock, flags); } -/** - * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1. - */ -void prcmu_disable_spi2(void) +void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value) { - u32 reg; + u32 val; unsigned long flags; - spin_lock_irqsave(&gpiocr_lock, flags); - reg = readl(PRCM_GPIOCR); - writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR); - spin_unlock_irqrestore(&gpiocr_lock, flags); + spin_lock_irqsave(&prcmu_lock, flags); + val = readl(_PRCMU_BASE + reg); + val = ((val & ~mask) | (value & mask)); + writel(val, (_PRCMU_BASE + reg)); + spin_unlock_irqrestore(&prcmu_lock, flags); } -bool prcmu_has_arm_maxopp(void) +struct prcmu_fw_version *prcmu_get_fw_version(void) { - return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) & - PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK; + return fw_info.valid ? &fw_info.version : NULL; } -bool prcmu_is_u8400(void) +bool prcmu_has_arm_maxopp(void) { - return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0; + return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) & + PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK; } /** @@ -787,6 +788,124 @@ int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) return 0; } +u8 db8500_prcmu_get_power_state_result(void) +{ + return readb(tcdm_base + PRCM_ACK_MB0_AP_PWRSTTR_STATUS); +} + +/* This function decouple the gic from the prcmu */ +int db8500_prcmu_gic_decouple(void) +{ + u32 val = readl(PRCM_A9_MASK_REQ); + + /* Set bit 0 register value to 1 */ + writel(val | PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, + PRCM_A9_MASK_REQ); + + /* Make sure the register is updated */ + readl(PRCM_A9_MASK_REQ); + + /* Wait a few cycles for the gic mask completion */ + udelay(1); + + return 0; +} + +/* This function recouple the gic with the prcmu */ +int db8500_prcmu_gic_recouple(void) +{ + u32 val = readl(PRCM_A9_MASK_REQ); + + /* Set bit 0 register value to 0 */ + writel(val & ~PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, PRCM_A9_MASK_REQ); + + return 0; +} + +#define PRCMU_GIC_NUMBER_REGS 5 + +/* + * This function checks if there are pending irq on the gic. It only + * makes sense if the gic has been decoupled before with the + * db8500_prcmu_gic_decouple function. Disabling an interrupt only + * disables the forwarding of the interrupt to any CPU interface. It + * does not prevent the interrupt from changing state, for example + * becoming pending, or active and pending if it is already + * active. Hence, we have to check the interrupt is pending *and* is + * active. + */ +bool db8500_prcmu_gic_pending_irq(void) +{ + u32 pr; /* Pending register */ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* 5 registers. STI & PPI not skipped */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) { + + pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4); + er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); + + if (pr & er) + return true; /* There is a pending interrupt */ + } + + return false; +} + +/* + * This function checks if there are pending interrupt on the + * prcmu which has been delegated to monitor the irqs with the + * db8500_prcmu_copy_gic_settings function. + */ +bool db8500_prcmu_pending_irq(void) +{ + u32 it, im; + int i; + + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + it = readl(PRCM_ARMITVAL31TO0 + i * 4); + im = readl(PRCM_ARMITMSK31TO0 + i * 4); + if (it & im) + return true; /* There is a pending interrupt */ + } + + return false; +} + +/* + * This function checks if the specified cpu is in in WFI. It's usage + * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple + * function. Of course passing smp_processor_id() to this function will + * always return false... + */ +bool db8500_prcmu_is_cpu_in_wfi(int cpu) +{ + return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : + PRCM_ARM_WFI_STANDBY_WFI0; +} + +/* + * This function copies the gic SPI settings to the prcmu in order to + * monitor them and abort/finish the retention/off sequence or state. + */ +int db8500_prcmu_copy_gic_settings(void) +{ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* We skip the STI and PPI */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + er = readl_relaxed(dist_base + + GIC_DIST_ENABLE_SET + (i + 1) * 4); + writel(er, PRCM_ARMITMSK31TO0 + i * 4); + } + + return 0; +} + /* This function should only be called while mb0_transfer.lock is held. */ static void config_wakeups(void) { @@ -909,23 +1028,23 @@ int db8500_prcmu_get_arm_opp(void) } /** - * prcmu_get_ddr_opp - get the current DDR OPP + * db8500_prcmu_get_ddr_opp - get the current DDR OPP * * Returns: the current DDR OPP */ -int prcmu_get_ddr_opp(void) +int db8500_prcmu_get_ddr_opp(void) { return readb(PRCM_DDR_SUBSYS_APE_MINBW); } /** - * set_ddr_opp - set the appropriate DDR OPP + * db8500_set_ddr_opp - set the appropriate DDR OPP * @opp: The new DDR operating point to which transition is to be made * Returns: 0 on success, non-zero on failure * * This function sets the operating point of the DDR. */ -int prcmu_set_ddr_opp(u8 opp) +int db8500_prcmu_set_ddr_opp(u8 opp) { if (opp < DDR_100_OPP || opp > DDR_25_OPP) return -EINVAL; @@ -935,25 +1054,82 @@ int prcmu_set_ddr_opp(u8 opp) return 0; } + +/* Divide the frequency of certain clocks by 2 for APE_50_PARTLY_25_OPP. */ +static void request_even_slower_clocks(bool enable) +{ + void __iomem *clock_reg[] = { + PRCM_ACLK_MGT, + PRCM_DMACLK_MGT + }; + unsigned long flags; + unsigned int i; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + for (i = 0; i < ARRAY_SIZE(clock_reg); i++) { + u32 val; + u32 div; + + val = readl(clock_reg[i]); + div = (val & PRCM_CLK_MGT_CLKPLLDIV_MASK); + if (enable) { + if ((div <= 1) || (div > 15)) { + pr_err("prcmu: Bad clock divider %d in %s\n", + div, __func__); + goto unlock_and_return; + } + div <<= 1; + } else { + if (div <= 2) + goto unlock_and_return; + div >>= 1; + } + val = ((val & ~PRCM_CLK_MGT_CLKPLLDIV_MASK) | + (div & PRCM_CLK_MGT_CLKPLLDIV_MASK)); + writel(val, clock_reg[i]); + } + +unlock_and_return: + /* Release the HW semaphore. */ + writel(0, PRCM_SEM); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); +} + /** - * set_ape_opp - set the appropriate APE OPP + * db8500_set_ape_opp - set the appropriate APE OPP * @opp: The new APE operating point to which transition is to be made * Returns: 0 on success, non-zero on failure * * This function sets the operating point of the APE. */ -int prcmu_set_ape_opp(u8 opp) +int db8500_prcmu_set_ape_opp(u8 opp) { int r = 0; + if (opp == mb1_transfer.ape_opp) + return 0; + mutex_lock(&mb1_transfer.lock); + if (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP) + request_even_slower_clocks(false); + + if ((opp != APE_100_OPP) && (mb1_transfer.ape_opp != APE_100_OPP)) + goto skip_message; + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) cpu_relax(); writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP)); - writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP)); + writeb(((opp == APE_50_PARTLY_25_OPP) ? APE_50_OPP : opp), + (tcdm_base + PRCM_REQ_MB1_APE_OPP)); writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); wait_for_completion(&mb1_transfer.work); @@ -962,17 +1138,24 @@ int prcmu_set_ape_opp(u8 opp) (mb1_transfer.ack.ape_opp != opp)) r = -EIO; +skip_message: + if ((!r && (opp == APE_50_PARTLY_25_OPP)) || + (r && (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP))) + request_even_slower_clocks(true); + if (!r) + mb1_transfer.ape_opp = opp; + mutex_unlock(&mb1_transfer.lock); return r; } /** - * prcmu_get_ape_opp - get the current APE OPP + * db8500_prcmu_get_ape_opp - get the current APE OPP * * Returns: the current APE OPP */ -int prcmu_get_ape_opp(void) +int db8500_prcmu_get_ape_opp(void) { return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP); } @@ -1056,7 +1239,9 @@ static int request_pll(u8 clock, bool enable) { int r = 0; - if (clock == PRCMU_PLLSOC1) + if (clock == PRCMU_PLLSOC0) + clock = (enable ? PLL_SOC0_ON : PLL_SOC0_OFF); + else if (clock == PRCMU_PLLSOC1) clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF); else return -EINVAL; @@ -1081,132 +1266,6 @@ static int request_pll(u8 clock, bool enable) } /** - * prcmu_set_hwacc - set the power state of a h/w accelerator - * @hwacc_dev: The hardware accelerator (enum hw_acc_dev). - * @state: The new power state (enum hw_acc_state). - * - * This function sets the power state of a hardware accelerator. - * This function should not be called from interrupt context. - * - * NOTE! Deprecated, to be removed when all users switched over to use the - * regulator framework API. - */ -int prcmu_set_hwacc(u16 hwacc_dev, u8 state) -{ - int r = 0; - bool ram_retention = false; - bool enable, enable_ret; - - /* check argument */ - BUG_ON(hwacc_dev >= NUM_HW_ACC); - - /* get state of switches */ - enable = hwacc_enabled[hwacc_dev]; - enable_ret = hwacc_ret_enabled[hwacc_dev]; - - /* set flag if retention is possible */ - switch (hwacc_dev) { - case HW_ACC_SVAMMDSP: - case HW_ACC_SIAMMDSP: - case HW_ACC_ESRAM1: - case HW_ACC_ESRAM2: - case HW_ACC_ESRAM3: - case HW_ACC_ESRAM4: - ram_retention = true; - break; - } - - /* check argument */ - BUG_ON(state > HW_ON); - BUG_ON(state == HW_OFF_RAMRET && !ram_retention); - - /* modify enable flags */ - switch (state) { - case HW_OFF: - enable_ret = false; - enable = false; - break; - case HW_ON: - enable = true; - break; - case HW_OFF_RAMRET: - enable_ret = true; - enable = false; - break; - } - - /* get regulator (lazy) */ - if (hwacc_regulator[hwacc_dev] == NULL) { - hwacc_regulator[hwacc_dev] = regulator_get(NULL, - hwacc_regulator_name[hwacc_dev]); - if (IS_ERR(hwacc_regulator[hwacc_dev])) { - pr_err("prcmu: failed to get supply %s\n", - hwacc_regulator_name[hwacc_dev]); - r = PTR_ERR(hwacc_regulator[hwacc_dev]); - goto out; - } - } - - if (ram_retention) { - if (hwacc_ret_regulator[hwacc_dev] == NULL) { - hwacc_ret_regulator[hwacc_dev] = regulator_get(NULL, - hwacc_ret_regulator_name[hwacc_dev]); - if (IS_ERR(hwacc_ret_regulator[hwacc_dev])) { - pr_err("prcmu: failed to get supply %s\n", - hwacc_ret_regulator_name[hwacc_dev]); - r = PTR_ERR(hwacc_ret_regulator[hwacc_dev]); - goto out; - } - } - } - - /* set regulators */ - if (ram_retention) { - if (enable_ret && !hwacc_ret_enabled[hwacc_dev]) { - r = regulator_enable(hwacc_ret_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: ret enable failed\n"); - goto out; - } - hwacc_ret_enabled[hwacc_dev] = true; - } - } - - if (enable && !hwacc_enabled[hwacc_dev]) { - r = regulator_enable(hwacc_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: enable failed\n"); - goto out; - } - hwacc_enabled[hwacc_dev] = true; - } - - if (!enable && hwacc_enabled[hwacc_dev]) { - r = regulator_disable(hwacc_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: disable failed\n"); - goto out; - } - hwacc_enabled[hwacc_dev] = false; - } - - if (ram_retention) { - if (!enable_ret && hwacc_ret_enabled[hwacc_dev]) { - r = regulator_disable(hwacc_ret_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: ret disable failed\n"); - goto out; - } - hwacc_ret_enabled[hwacc_dev] = false; - } - } - -out: - return r; -} -EXPORT_SYMBOL(prcmu_set_hwacc); - -/** * db8500_prcmu_set_epod - set the state of a EPOD (power domain) * @epod_id: The EPOD to set * @epod_state: The new EPOD state @@ -1375,7 +1434,7 @@ static int request_timclk(bool enable) return 0; } -static int request_reg_clock(u8 clock, bool enable) +static int request_clock(u8 clock, bool enable) { u32 val; unsigned long flags; @@ -1386,14 +1445,14 @@ static int request_reg_clock(u8 clock, bool enable) while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) cpu_relax(); - val = readl(_PRCMU_BASE + clk_mgt[clock].offset); + val = readl(clk_mgt[clock].reg); if (enable) { val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw); } else { clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK); val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK); } - writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); + writel(val, clk_mgt[clock].reg); /* Release the HW semaphore. */ writel(0, PRCM_SEM); @@ -1413,7 +1472,7 @@ static int request_sga_clock(u8 clock, bool enable) writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS); } - ret = request_reg_clock(clock, enable); + ret = request_clock(clock, enable); if (!ret && !enable) { val = readl(PRCM_CGATING_BYPASS); @@ -1423,6 +1482,78 @@ static int request_sga_clock(u8 clock, bool enable) return ret; } +static inline bool plldsi_locked(void) +{ + return (readl(PRCM_PLLDSI_LOCKP) & + (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 | + PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3)) == + (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 | + PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3); +} + +static int request_plldsi(bool enable) +{ + int r = 0; + u32 val; + + writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP | + PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), (enable ? + PRCM_MMIP_LS_CLAMP_CLR : PRCM_MMIP_LS_CLAMP_SET)); + + val = readl(PRCM_PLLDSI_ENABLE); + if (enable) + val |= PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE; + else + val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE; + writel(val, PRCM_PLLDSI_ENABLE); + + if (enable) { + unsigned int i; + bool locked = plldsi_locked(); + + for (i = 10; !locked && (i > 0); --i) { + udelay(100); + locked = plldsi_locked(); + } + if (locked) { + writel(PRCM_APE_RESETN_DSIPLL_RESETN, + PRCM_APE_RESETN_SET); + } else { + writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP | + PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), + PRCM_MMIP_LS_CLAMP_SET); + val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE; + writel(val, PRCM_PLLDSI_ENABLE); + r = -EAGAIN; + } + } else { + writel(PRCM_APE_RESETN_DSIPLL_RESETN, PRCM_APE_RESETN_CLR); + } + return r; +} + +static int request_dsiclk(u8 n, bool enable) +{ + u32 val; + + val = readl(PRCM_DSI_PLLOUT_SEL); + val &= ~dsiclk[n].divsel_mask; + val |= ((enable ? dsiclk[n].divsel : PRCM_DSI_PLLOUT_SEL_OFF) << + dsiclk[n].divsel_shift); + writel(val, PRCM_DSI_PLLOUT_SEL); + return 0; +} + +static int request_dsiescclk(u8 n, bool enable) +{ + u32 val; + + val = readl(PRCM_DSITVCLK_DIV); + enable ? (val |= dsiescclk[n].en) : (val &= ~dsiescclk[n].en); + writel(val, PRCM_DSITVCLK_DIV); + return 0; +} + /** * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled. * @clock: The clock for which the request is made. @@ -1433,21 +1564,435 @@ static int request_sga_clock(u8 clock, bool enable) */ int db8500_prcmu_request_clock(u8 clock, bool enable) { - switch(clock) { - case PRCMU_SGACLK: + if (clock == PRCMU_SGACLK) return request_sga_clock(clock, enable); - case PRCMU_TIMCLK: + else if (clock < PRCMU_NUM_REG_CLOCKS) + return request_clock(clock, enable); + else if (clock == PRCMU_TIMCLK) return request_timclk(enable); - case PRCMU_SYSCLK: + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + return request_dsiclk((clock - PRCMU_DSI0CLK), enable); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + return request_dsiescclk((clock - PRCMU_DSI0ESCCLK), enable); + else if (clock == PRCMU_PLLDSI) + return request_plldsi(enable); + else if (clock == PRCMU_SYSCLK) return request_sysclk(enable); - case PRCMU_PLLSOC1: + else if ((clock == PRCMU_PLLSOC0) || (clock == PRCMU_PLLSOC1)) return request_pll(clock, enable); + else + return -EINVAL; +} + +static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate, + int branch) +{ + u64 rate; + u32 val; + u32 d; + u32 div = 1; + + val = readl(reg); + + rate = src_rate; + rate *= ((val & PRCM_PLL_FREQ_D_MASK) >> PRCM_PLL_FREQ_D_SHIFT); + + d = ((val & PRCM_PLL_FREQ_N_MASK) >> PRCM_PLL_FREQ_N_SHIFT); + if (d > 1) + div *= d; + + d = ((val & PRCM_PLL_FREQ_R_MASK) >> PRCM_PLL_FREQ_R_SHIFT); + if (d > 1) + div *= d; + + if (val & PRCM_PLL_FREQ_SELDIV2) + div *= 2; + + if ((branch == PLL_FIX) || ((branch == PLL_DIV) && + (val & PRCM_PLL_FREQ_DIV2EN) && + ((reg == PRCM_PLLSOC0_FREQ) || + (reg == PRCM_PLLDDR_FREQ)))) + div *= 2; + + (void)do_div(rate, div); + + return (unsigned long)rate; +} + +#define ROOT_CLOCK_RATE 38400000 + +static unsigned long clock_rate(u8 clock) +{ + u32 val; + u32 pllsw; + unsigned long rate = ROOT_CLOCK_RATE; + + val = readl(clk_mgt[clock].reg); + + if (val & PRCM_CLK_MGT_CLK38) { + if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV)) + rate /= 2; + return rate; + } + + val |= clk_mgt[clock].pllsw; + pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK); + + if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC0) + rate = pll_rate(PRCM_PLLSOC0_FREQ, rate, clk_mgt[clock].branch); + else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC1) + rate = pll_rate(PRCM_PLLSOC1_FREQ, rate, clk_mgt[clock].branch); + else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_DDR) + rate = pll_rate(PRCM_PLLDDR_FREQ, rate, clk_mgt[clock].branch); + else + return 0; + + if ((clock == PRCMU_SGACLK) && + (val & PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN)) { + u64 r = (rate * 10); + + (void)do_div(r, 25); + return (unsigned long)r; + } + val &= PRCM_CLK_MGT_CLKPLLDIV_MASK; + if (val) + return rate / val; + else + return 0; +} + +static unsigned long dsiclk_rate(u8 n) +{ + u32 divsel; + u32 div = 1; + + divsel = readl(PRCM_DSI_PLLOUT_SEL); + divsel = ((divsel & dsiclk[n].divsel_mask) >> dsiclk[n].divsel_shift); + + if (divsel == PRCM_DSI_PLLOUT_SEL_OFF) + divsel = dsiclk[n].divsel; + + switch (divsel) { + case PRCM_DSI_PLLOUT_SEL_PHI_4: + div *= 2; + case PRCM_DSI_PLLOUT_SEL_PHI_2: + div *= 2; + case PRCM_DSI_PLLOUT_SEL_PHI: + return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK), + PLL_RAW) / div; default: - break; + return 0; + } +} + +static unsigned long dsiescclk_rate(u8 n) +{ + u32 div; + + div = readl(PRCM_DSITVCLK_DIV); + div = ((div & dsiescclk[n].div_mask) >> (dsiescclk[n].div_shift)); + return clock_rate(PRCMU_TVCLK) / max((u32)1, div); +} + +unsigned long prcmu_clock_rate(u8 clock) +{ + if (clock < PRCMU_NUM_REG_CLOCKS) + return clock_rate(clock); + else if (clock == PRCMU_TIMCLK) + return ROOT_CLOCK_RATE / 16; + else if (clock == PRCMU_SYSCLK) + return ROOT_CLOCK_RATE; + else if (clock == PRCMU_PLLSOC0) + return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW); + else if (clock == PRCMU_PLLSOC1) + return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW); + else if (clock == PRCMU_PLLDDR) + return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW); + else if (clock == PRCMU_PLLDSI) + return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK), + PLL_RAW); + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + return dsiclk_rate(clock - PRCMU_DSI0CLK); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + return dsiescclk_rate(clock - PRCMU_DSI0ESCCLK); + else + return 0; +} + +static unsigned long clock_source_rate(u32 clk_mgt_val, int branch) +{ + if (clk_mgt_val & PRCM_CLK_MGT_CLK38) + return ROOT_CLOCK_RATE; + clk_mgt_val &= PRCM_CLK_MGT_CLKPLLSW_MASK; + if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC0) + return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, branch); + else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC1) + return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, branch); + else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_DDR) + return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, branch); + else + return 0; +} + +static u32 clock_divider(unsigned long src_rate, unsigned long rate) +{ + u32 div; + + div = (src_rate / rate); + if (div == 0) + return 1; + if (rate < (src_rate / div)) + div++; + return div; +} + +static long round_clock_rate(u8 clock, unsigned long rate) +{ + u32 val; + u32 div; + unsigned long src_rate; + long rounded_rate; + + val = readl(clk_mgt[clock].reg); + src_rate = clock_source_rate((val | clk_mgt[clock].pllsw), + clk_mgt[clock].branch); + div = clock_divider(src_rate, rate); + if (val & PRCM_CLK_MGT_CLK38) { + if (clk_mgt[clock].clk38div) { + if (div > 2) + div = 2; + } else { + div = 1; + } + } else if ((clock == PRCMU_SGACLK) && (div == 3)) { + u64 r = (src_rate * 10); + + (void)do_div(r, 25); + if (r <= rate) + return (unsigned long)r; + } + rounded_rate = (src_rate / min(div, (u32)31)); + + return rounded_rate; +} + +#define MIN_PLL_VCO_RATE 600000000ULL +#define MAX_PLL_VCO_RATE 1680640000ULL + +static long round_plldsi_rate(unsigned long rate) +{ + long rounded_rate = 0; + unsigned long src_rate; + unsigned long rem; + u32 r; + + src_rate = clock_rate(PRCMU_HDMICLK); + rem = rate; + + for (r = 7; (rem > 0) && (r > 0); r--) { + u64 d; + + d = (r * rate); + (void)do_div(d, src_rate); + if (d < 6) + d = 6; + else if (d > 255) + d = 255; + d *= src_rate; + if (((2 * d) < (r * MIN_PLL_VCO_RATE)) || + ((r * MAX_PLL_VCO_RATE) < (2 * d))) + continue; + (void)do_div(d, r); + if (rate < d) { + if (rounded_rate == 0) + rounded_rate = (long)d; + break; + } + if ((rate - d) < rem) { + rem = (rate - d); + rounded_rate = (long)d; + } + } + return rounded_rate; +} + +static long round_dsiclk_rate(unsigned long rate) +{ + u32 div; + unsigned long src_rate; + long rounded_rate; + + src_rate = pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK), + PLL_RAW); + div = clock_divider(src_rate, rate); + rounded_rate = (src_rate / ((div > 2) ? 4 : div)); + + return rounded_rate; +} + +static long round_dsiescclk_rate(unsigned long rate) +{ + u32 div; + unsigned long src_rate; + long rounded_rate; + + src_rate = clock_rate(PRCMU_TVCLK); + div = clock_divider(src_rate, rate); + rounded_rate = (src_rate / min(div, (u32)255)); + + return rounded_rate; +} + +long prcmu_round_clock_rate(u8 clock, unsigned long rate) +{ + if (clock < PRCMU_NUM_REG_CLOCKS) + return round_clock_rate(clock, rate); + else if (clock == PRCMU_PLLDSI) + return round_plldsi_rate(rate); + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + return round_dsiclk_rate(rate); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + return round_dsiescclk_rate(rate); + else + return (long)prcmu_clock_rate(clock); +} + +static void set_clock_rate(u8 clock, unsigned long rate) +{ + u32 val; + u32 div; + unsigned long src_rate; + unsigned long flags; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + val = readl(clk_mgt[clock].reg); + src_rate = clock_source_rate((val | clk_mgt[clock].pllsw), + clk_mgt[clock].branch); + div = clock_divider(src_rate, rate); + if (val & PRCM_CLK_MGT_CLK38) { + if (clk_mgt[clock].clk38div) { + if (div > 1) + val |= PRCM_CLK_MGT_CLK38DIV; + else + val &= ~PRCM_CLK_MGT_CLK38DIV; + } + } else if (clock == PRCMU_SGACLK) { + val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK | + PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN); + if (div == 3) { + u64 r = (src_rate * 10); + + (void)do_div(r, 25); + if (r <= rate) { + val |= PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN; + div = 0; + } + } + val |= min(div, (u32)31); + } else { + val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK; + val |= min(div, (u32)31); + } + writel(val, clk_mgt[clock].reg); + + /* Release the HW semaphore. */ + writel(0, PRCM_SEM); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); +} + +static int set_plldsi_rate(unsigned long rate) +{ + unsigned long src_rate; + unsigned long rem; + u32 pll_freq = 0; + u32 r; + + src_rate = clock_rate(PRCMU_HDMICLK); + rem = rate; + + for (r = 7; (rem > 0) && (r > 0); r--) { + u64 d; + u64 hwrate; + + d = (r * rate); + (void)do_div(d, src_rate); + if (d < 6) + d = 6; + else if (d > 255) + d = 255; + hwrate = (d * src_rate); + if (((2 * hwrate) < (r * MIN_PLL_VCO_RATE)) || + ((r * MAX_PLL_VCO_RATE) < (2 * hwrate))) + continue; + (void)do_div(hwrate, r); + if (rate < hwrate) { + if (pll_freq == 0) + pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) | + (r << PRCM_PLL_FREQ_R_SHIFT)); + break; + } + if ((rate - hwrate) < rem) { + rem = (rate - hwrate); + pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) | + (r << PRCM_PLL_FREQ_R_SHIFT)); + } } + if (pll_freq == 0) + return -EINVAL; + + pll_freq |= (1 << PRCM_PLL_FREQ_N_SHIFT); + writel(pll_freq, PRCM_PLLDSI_FREQ); + + return 0; +} + +static void set_dsiclk_rate(u8 n, unsigned long rate) +{ + u32 val; + u32 div; + + div = clock_divider(pll_rate(PRCM_PLLDSI_FREQ, + clock_rate(PRCMU_HDMICLK), PLL_RAW), rate); + + dsiclk[n].divsel = (div == 1) ? PRCM_DSI_PLLOUT_SEL_PHI : + (div == 2) ? PRCM_DSI_PLLOUT_SEL_PHI_2 : + /* else */ PRCM_DSI_PLLOUT_SEL_PHI_4; + + val = readl(PRCM_DSI_PLLOUT_SEL); + val &= ~dsiclk[n].divsel_mask; + val |= (dsiclk[n].divsel << dsiclk[n].divsel_shift); + writel(val, PRCM_DSI_PLLOUT_SEL); +} + +static void set_dsiescclk_rate(u8 n, unsigned long rate) +{ + u32 val; + u32 div; + + div = clock_divider(clock_rate(PRCMU_TVCLK), rate); + val = readl(PRCM_DSITVCLK_DIV); + val &= ~dsiescclk[n].div_mask; + val |= (min(div, (u32)255) << dsiescclk[n].div_shift); + writel(val, PRCM_DSITVCLK_DIV); +} + +int prcmu_set_clock_rate(u8 clock, unsigned long rate) +{ if (clock < PRCMU_NUM_REG_CLOCKS) - return request_reg_clock(clock, enable); - return -EINVAL; + set_clock_rate(clock, rate); + else if (clock == PRCMU_PLLDSI) + return set_plldsi_rate(rate); + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + set_dsiclk_rate((clock - PRCMU_DSI0CLK), rate); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + set_dsiescclk_rate((clock - PRCMU_DSI0ESCCLK), rate); + return 0; } int db8500_prcmu_config_esram0_deep_sleep(u8 state) @@ -1476,7 +2021,7 @@ int db8500_prcmu_config_esram0_deep_sleep(u8 state) return 0; } -int prcmu_config_hotdog(u8 threshold) +int db8500_prcmu_config_hotdog(u8 threshold) { mutex_lock(&mb4_transfer.lock); @@ -1494,7 +2039,7 @@ int prcmu_config_hotdog(u8 threshold) return 0; } -int prcmu_config_hotmon(u8 low, u8 high) +int db8500_prcmu_config_hotmon(u8 low, u8 high) { mutex_lock(&mb4_transfer.lock); @@ -1533,7 +2078,7 @@ static int config_hot_period(u16 val) return 0; } -int prcmu_start_temp_sense(u16 cycles32k) +int db8500_prcmu_start_temp_sense(u16 cycles32k) { if (cycles32k == 0xFFFF) return -EINVAL; @@ -1541,7 +2086,7 @@ int prcmu_start_temp_sense(u16 cycles32k) return config_hot_period(cycles32k); } -int prcmu_stop_temp_sense(void) +int db8500_prcmu_stop_temp_sense(void) { return config_hot_period(0xFFFF); } @@ -1570,7 +2115,7 @@ static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3) } -int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off) { BUG_ON(num == 0 || num > 0xf); return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0, @@ -1578,17 +2123,17 @@ int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) A9WDOG_AUTO_OFF_DIS); } -int prcmu_enable_a9wdog(u8 id) +int db8500_prcmu_enable_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0); } -int prcmu_disable_a9wdog(u8 id) +int db8500_prcmu_disable_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0); } -int prcmu_kick_a9wdog(u8 id) +int db8500_prcmu_kick_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0); } @@ -1596,16 +2141,8 @@ int prcmu_kick_a9wdog(u8 id) /* * timeout is 28 bit, in ms. */ -#define MAX_WATCHDOG_TIMEOUT 131000 -int prcmu_load_a9wdog(u8 id, u32 timeout) +int db8500_prcmu_load_a9wdog(u8 id, u32 timeout) { - if (timeout > MAX_WATCHDOG_TIMEOUT) - /* - * Due to calculation bug in prcmu fw, timeouts - * can't be bigger than 131 seconds. - */ - return -EINVAL; - return prcmu_a9wdog(MB4H_A9WDOG_LOAD, (id & A9WDOG_ID_MASK) | /* @@ -1619,41 +2156,6 @@ int prcmu_load_a9wdog(u8 id, u32 timeout) } /** - * prcmu_set_clock_divider() - Configure the clock divider. - * @clock: The clock for which the request is made. - * @divider: The clock divider. (< 32) - * - * This function should only be used by the clock implementation. - * Do not use it from any other place! - */ -int prcmu_set_clock_divider(u8 clock, u8 divider) -{ - u32 val; - unsigned long flags; - - if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider)) - return -EINVAL; - - spin_lock_irqsave(&clk_mgt_lock, flags); - - /* Grab the HW semaphore. */ - while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) - cpu_relax(); - - val = readl(_PRCMU_BASE + clk_mgt[clock].offset); - val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK); - val |= (u32)divider; - writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); - - /* Release the HW semaphore. */ - writel(0, PRCM_SEM); - - spin_unlock_irqrestore(&clk_mgt_lock, flags); - - return 0; -} - -/** * prcmu_abb_read() - Read register value(s) from the ABB. * @slave: The I2C slave address. * @reg: The (start) register address. @@ -1675,6 +2177,7 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); + writeb(0, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5)); writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); @@ -1700,16 +2203,19 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) } /** - * prcmu_abb_write() - Write register value(s) to the ABB. + * prcmu_abb_write_masked() - Write masked register value(s) to the ABB. * @slave: The I2C slave address. * @reg: The (start) register address. * @value: The value(s) to write. + * @mask: The mask(s) to use. * @size: The number of registers to write. * - * Reads register value(s) from the ABB. + * Writes masked register value(s) to the ABB. + * For each @value, only the bits set to 1 in the corresponding @mask + * will be written. The other bits are not changed. * @size has to be 1 for the current firmware version. */ -int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size) { int r; @@ -1721,6 +2227,7 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); + writeb(~*mask, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5)); writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); @@ -1743,6 +2250,23 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) } /** + * prcmu_abb_write() - Write register value(s) to the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The value(s) to write. + * @size: The number of registers to write. + * + * Writes register value(s) to the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + u8 mask = ~0; + + return prcmu_abb_write_masked(slave, reg, value, &mask, size); +} + +/** * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem */ void prcmu_ac_wake_req(void) @@ -1850,9 +2374,9 @@ u16 db8500_prcmu_get_reset_code(void) } /** - * prcmu_reset_modem - ask the PRCMU to reset modem + * db8500_prcmu_reset_modem - ask the PRCMU to reset modem */ -void prcmu_modem_reset(void) +void db8500_prcmu_modem_reset(void) { mutex_lock(&mb1_transfer.lock); @@ -2099,6 +2623,26 @@ static struct irq_chip prcmu_irq_chip = { .irq_unmask = prcmu_irq_unmask, }; +static char *fw_project_name(u8 project) +{ + switch (project) { + case PRCMU_FW_PROJECT_U8500: + return "U8500"; + case PRCMU_FW_PROJECT_U8500_C2: + return "U8500 C2"; + case PRCMU_FW_PROJECT_U9500: + return "U9500"; + case PRCMU_FW_PROJECT_U9500_C2: + return "U9500 C2"; + case PRCMU_FW_PROJECT_U8520: + return "U8520"; + case PRCMU_FW_PROJECT_U8420: + return "U8420"; + default: + return "Unknown"; + } +} + void __init db8500_prcmu_early_init(void) { unsigned int i; @@ -2108,11 +2652,13 @@ void __init db8500_prcmu_early_init(void) if (tcpm_base != NULL) { u32 version; version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET); - prcmu_version.project_number = version & 0xFF; - prcmu_version.api_version = (version >> 8) & 0xFF; - prcmu_version.func_version = (version >> 16) & 0xFF; - prcmu_version.errata = (version >> 24) & 0xFF; - pr_info("PRCMU firmware version %d.%d.%d\n", + fw_info.version.project = version & 0xFF; + fw_info.version.api_version = (version >> 8) & 0xFF; + fw_info.version.func_version = (version >> 16) & 0xFF; + fw_info.version.errata = (version >> 24) & 0xFF; + fw_info.valid = true; + pr_info("PRCMU firmware: %s, version %d.%d.%d\n", + fw_project_name(fw_info.version.project), (version >> 8) & 0xFF, (version >> 16) & 0xFF, (version >> 24) & 0xFF); iounmap(tcpm_base); @@ -2130,6 +2676,7 @@ void __init db8500_prcmu_early_init(void) init_completion(&mb0_transfer.ac_wake_work); mutex_init(&mb1_transfer.lock); init_completion(&mb1_transfer.work); + mb1_transfer.ape_opp = APE_NO_CHANGE; mutex_init(&mb2_transfer.lock); init_completion(&mb2_transfer.work); spin_lock_init(&mb2_transfer.auto_pm_lock); @@ -2154,7 +2701,7 @@ void __init db8500_prcmu_early_init(void) } } -static void __init db8500_prcmu_init_clkforce(void) +static void __init init_prcm_registers(void) { u32 val; @@ -2186,19 +2733,17 @@ static struct regulator_consumer_supply db8500_vape_consumers[] = { REGULATOR_SUPPLY("vcore", "uart1"), REGULATOR_SUPPLY("vcore", "uart2"), REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"), + REGULATOR_SUPPLY("v-hsi", "ste_hsi.0"), }; static struct regulator_consumer_supply db8500_vsmps2_consumers[] = { - /* CG2900 and CW1200 power to off-chip peripherals */ - REGULATOR_SUPPLY("gbf_1v8", "cg2900-uart.0"), - REGULATOR_SUPPLY("wlan_1v8", "cw1200.0"), REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"), /* AV8100 regulator */ REGULATOR_SUPPLY("hdmi_1v8", "0-0070"), }; static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = { - REGULATOR_SUPPLY("vsupply", "b2r2.0"), + REGULATOR_SUPPLY("vsupply", "b2r2_bus"), REGULATOR_SUPPLY("vsupply", "mcde"), }; @@ -2235,6 +2780,7 @@ static struct regulator_consumer_supply db8500_esram12_consumers[] = { static struct regulator_consumer_supply db8500_esram34_consumers[] = { REGULATOR_SUPPLY("v-esram34", "mcde"), REGULATOR_SUPPLY("esram34", "cm_control"), + REGULATOR_SUPPLY("lcla_esram", "dma40.0"), }; static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { @@ -2291,7 +2837,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { }, }, [DB8500_REGULATOR_SWITCH_SVAMMDSP] = { - .supply_regulator = "db8500-vape", + /* dependency to u8500-vape is handled outside regulator framework */ .constraints = { .name = "db8500-sva-mmdsp", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2307,7 +2853,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { }, }, [DB8500_REGULATOR_SWITCH_SVAPIPE] = { - .supply_regulator = "db8500-vape", + /* dependency to u8500-vape is handled outside regulator framework */ .constraints = { .name = "db8500-sva-pipe", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2316,7 +2862,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers), }, [DB8500_REGULATOR_SWITCH_SIAMMDSP] = { - .supply_regulator = "db8500-vape", + /* dependency to u8500-vape is handled outside regulator framework */ .constraints = { .name = "db8500-sia-mmdsp", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2331,7 +2877,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { }, }, [DB8500_REGULATOR_SWITCH_SIAPIPE] = { - .supply_regulator = "db8500-vape", + /* dependency to u8500-vape is handled outside regulator framework */ .constraints = { .name = "db8500-sia-pipe", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2359,7 +2905,10 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers), }, [DB8500_REGULATOR_SWITCH_ESRAM12] = { - .supply_regulator = "db8500-vape", + /* + * esram12 is set in retention and supplied by Vsafe when Vape is off, + * no need to hold Vape + */ .constraints = { .name = "db8500-esram12", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2374,7 +2923,10 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { }, }, [DB8500_REGULATOR_SWITCH_ESRAM34] = { - .supply_regulator = "db8500-vape", + /* + * esram34 is set in retention and supplied by Vsafe when Vape is off, + * no need to hold Vape + */ .constraints = { .name = "db8500-esram34", .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -2412,7 +2964,7 @@ static int __init db8500_prcmu_probe(struct platform_device *pdev) if (ux500_is_svp()) return -ENODEV; - db8500_prcmu_init_clkforce(); + init_prcm_registers(); /* Clean up the mailbox interrupts after pre-kernel code. */ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR); diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h index ec22e9f15d3..3a0bf91d778 100644 --- a/drivers/mfd/dbx500-prcmu-regs.h +++ b/drivers/mfd/dbx500-prcmu-regs.h @@ -17,41 +17,41 @@ #define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end)) -#define PRCM_SVACLK_MGT_OFF 0x008 -#define PRCM_SIACLK_MGT_OFF 0x00C -#define PRCM_SGACLK_MGT_OFF 0x014 -#define PRCM_UARTCLK_MGT_OFF 0x018 -#define PRCM_MSP02CLK_MGT_OFF 0x01C -#define PRCM_I2CCLK_MGT_OFF 0x020 -#define PRCM_SDMMCCLK_MGT_OFF 0x024 -#define PRCM_SLIMCLK_MGT_OFF 0x028 -#define PRCM_PER1CLK_MGT_OFF 0x02C -#define PRCM_PER2CLK_MGT_OFF 0x030 -#define PRCM_PER3CLK_MGT_OFF 0x034 -#define PRCM_PER5CLK_MGT_OFF 0x038 -#define PRCM_PER6CLK_MGT_OFF 0x03C -#define PRCM_PER7CLK_MGT_OFF 0x040 -#define PRCM_PWMCLK_MGT_OFF 0x044 /* for DB5500 */ -#define PRCM_IRDACLK_MGT_OFF 0x048 /* for DB5500 */ -#define PRCM_IRRCCLK_MGT_OFF 0x04C /* for DB5500 */ -#define PRCM_LCDCLK_MGT_OFF 0x044 -#define PRCM_BMLCLK_MGT_OFF 0x04C -#define PRCM_HSITXCLK_MGT_OFF 0x050 -#define PRCM_HSIRXCLK_MGT_OFF 0x054 -#define PRCM_HDMICLK_MGT_OFF 0x058 -#define PRCM_APEATCLK_MGT_OFF 0x05C -#define PRCM_APETRACECLK_MGT_OFF 0x060 -#define PRCM_MCDECLK_MGT_OFF 0x064 -#define PRCM_IPI2CCLK_MGT_OFF 0x068 -#define PRCM_DSIALTCLK_MGT_OFF 0x06C -#define PRCM_DMACLK_MGT_OFF 0x074 -#define PRCM_B2R2CLK_MGT_OFF 0x078 -#define PRCM_TVCLK_MGT_OFF 0x07C -#define PRCM_UNIPROCLK_MGT_OFF 0x278 -#define PRCM_SSPCLK_MGT_OFF 0x280 -#define PRCM_RNGCLK_MGT_OFF 0x284 -#define PRCM_UICCCLK_MGT_OFF 0x27C -#define PRCM_MSP1CLK_MGT_OFF 0x288 +#define PRCM_CLK_MGT(_offset) (void __iomem *)(IO_ADDRESS(U8500_PRCMU_BASE) \ + + _offset) +#define PRCM_ACLK_MGT PRCM_CLK_MGT(0x004) +#define PRCM_SVACLK_MGT PRCM_CLK_MGT(0x008) +#define PRCM_SIACLK_MGT PRCM_CLK_MGT(0x00C) +#define PRCM_SGACLK_MGT PRCM_CLK_MGT(0x014) +#define PRCM_UARTCLK_MGT PRCM_CLK_MGT(0x018) +#define PRCM_MSP02CLK_MGT PRCM_CLK_MGT(0x01C) +#define PRCM_I2CCLK_MGT PRCM_CLK_MGT(0x020) +#define PRCM_SDMMCCLK_MGT PRCM_CLK_MGT(0x024) +#define PRCM_SLIMCLK_MGT PRCM_CLK_MGT(0x028) +#define PRCM_PER1CLK_MGT PRCM_CLK_MGT(0x02C) +#define PRCM_PER2CLK_MGT PRCM_CLK_MGT(0x030) +#define PRCM_PER3CLK_MGT PRCM_CLK_MGT(0x034) +#define PRCM_PER5CLK_MGT PRCM_CLK_MGT(0x038) +#define PRCM_PER6CLK_MGT PRCM_CLK_MGT(0x03C) +#define PRCM_PER7CLK_MGT PRCM_CLK_MGT(0x040) +#define PRCM_LCDCLK_MGT PRCM_CLK_MGT(0x044) +#define PRCM_BMLCLK_MGT PRCM_CLK_MGT(0x04C) +#define PRCM_HSITXCLK_MGT PRCM_CLK_MGT(0x050) +#define PRCM_HSIRXCLK_MGT PRCM_CLK_MGT(0x054) +#define PRCM_HDMICLK_MGT PRCM_CLK_MGT(0x058) +#define PRCM_APEATCLK_MGT PRCM_CLK_MGT(0x05C) +#define PRCM_APETRACECLK_MGT PRCM_CLK_MGT(0x060) +#define PRCM_MCDECLK_MGT PRCM_CLK_MGT(0x064) +#define PRCM_IPI2CCLK_MGT PRCM_CLK_MGT(0x068) +#define PRCM_DSIALTCLK_MGT PRCM_CLK_MGT(0x06C) +#define PRCM_DMACLK_MGT PRCM_CLK_MGT(0x074) +#define PRCM_B2R2CLK_MGT PRCM_CLK_MGT(0x078) +#define PRCM_TVCLK_MGT PRCM_CLK_MGT(0x07C) +#define PRCM_UNIPROCLK_MGT PRCM_CLK_MGT(0x278) +#define PRCM_SSPCLK_MGT PRCM_CLK_MGT(0x280) +#define PRCM_RNGCLK_MGT PRCM_CLK_MGT(0x284) +#define PRCM_UICCCLK_MGT PRCM_CLK_MGT(0x27C) +#define PRCM_MSP1CLK_MGT PRCM_CLK_MGT(0x288) #define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) #define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE 0x3f @@ -79,6 +79,8 @@ /* ARM WFI Standby signal register */ #define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) +#define PRCM_ARM_WFI_STANDBY_WFI0 0x08 +#define PRCM_ARM_WFI_STANDBY_WFI1 0x10 #define PRCM_IOCR (_PRCMU_BASE + 0x310) #define PRCM_IOCR_IOFORCE 0x1 @@ -131,20 +133,58 @@ #define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) #define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) +#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP BIT(11) +#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI BIT(22) + /* PRCMU clock/PLL/reset registers */ +#define PRCM_PLLSOC0_FREQ (_PRCMU_BASE + 0x080) +#define PRCM_PLLSOC1_FREQ (_PRCMU_BASE + 0x084) +#define PRCM_PLLDDR_FREQ (_PRCMU_BASE + 0x08C) +#define PRCM_PLL_FREQ_D_SHIFT 0 +#define PRCM_PLL_FREQ_D_MASK BITS(0, 7) +#define PRCM_PLL_FREQ_N_SHIFT 8 +#define PRCM_PLL_FREQ_N_MASK BITS(8, 13) +#define PRCM_PLL_FREQ_R_SHIFT 16 +#define PRCM_PLL_FREQ_R_MASK BITS(16, 18) +#define PRCM_PLL_FREQ_SELDIV2 BIT(24) +#define PRCM_PLL_FREQ_DIV2EN BIT(25) + #define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) #define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) #define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508) -#define PRCM_LCDCLK_MGT (_PRCMU_BASE + PRCM_LCDCLK_MGT_OFF) -#define PRCM_MCDECLK_MGT (_PRCMU_BASE + PRCM_MCDECLK_MGT_OFF) -#define PRCM_HDMICLK_MGT (_PRCMU_BASE + PRCM_HDMICLK_MGT_OFF) -#define PRCM_TVCLK_MGT (_PRCMU_BASE + PRCM_TVCLK_MGT_OFF) #define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) #define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) #define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508) #define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) #define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) +#define PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE BIT(0) + +#define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 BIT(0) +#define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3 BIT(1) + +#define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT 0 +#define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK BITS(0, 2) +#define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT 8 +#define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK BITS(8, 10) + +#define PRCM_DSI_PLLOUT_SEL_OFF 0 +#define PRCM_DSI_PLLOUT_SEL_PHI 1 +#define PRCM_DSI_PLLOUT_SEL_PHI_2 2 +#define PRCM_DSI_PLLOUT_SEL_PHI_4 3 + +#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT 0 +#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK BITS(0, 7) +#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT 8 +#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK BITS(8, 15) +#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT 16 +#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK BITS(16, 23) +#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN BIT(24) +#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN BIT(25) +#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN BIT(26) + +#define PRCM_APE_RESETN_DSIPLL_RESETN BIT(14) + #define PRCM_CLKOCR (_PRCMU_BASE + 0x1CC) #define PRCM_CLKOCR_CLKOUT0_REF_CLK (1 << 0) #define PRCM_CLKOCR_CLKOUT0_MASK BITS(0, 13) @@ -183,9 +223,15 @@ #define PRCM_CLKOCR_CLKOSEL1_MASK BITS(22, 24) #define PRCM_CLKOCR_CLK1TYPE BIT(28) -#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4) -#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7) -#define PRCM_CLK_MGT_CLKEN BIT(8) +#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4) +#define PRCM_CLK_MGT_CLKPLLSW_SOC0 BIT(5) +#define PRCM_CLK_MGT_CLKPLLSW_SOC1 BIT(6) +#define PRCM_CLK_MGT_CLKPLLSW_DDR BIT(7) +#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7) +#define PRCM_CLK_MGT_CLKEN BIT(8) +#define PRCM_CLK_MGT_CLK38 BIT(9) +#define PRCM_CLK_MGT_CLK38DIV BIT(11) +#define PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN BIT(12) /* GPIOCR register */ #define PRCM_GPIOCR_SPI2_SELECT BIT(23) diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index 7122386b4e3..9fd4f63c45c 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -560,6 +560,8 @@ EXPORT_SYMBOL(mc13xxx_get_flags); #define MC13XXX_ADC1_CHAN0_SHIFT 5 #define MC13XXX_ADC1_CHAN1_SHIFT 8 +#define MC13783_ADC1_ATO_SHIFT 11 +#define MC13783_ADC1_ATOX (1 << 19) struct mc13xxx_adcdone_data { struct mc13xxx *mc13xxx; @@ -580,7 +582,8 @@ static irqreturn_t mc13xxx_handler_adcdone(int irq, void *data) #define MC13XXX_ADC_WORKING (1 << 0) int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode, - unsigned int channel, unsigned int *sample) + unsigned int channel, u8 ato, bool atox, + unsigned int *sample) { u32 adc0, adc1, old_adc0; int i, ret; @@ -631,6 +634,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode, return -EINVAL; } + adc1 |= ato << MC13783_ADC1_ATO_SHIFT; + if (atox) + adc1 |= MC13783_ADC1_ATOX; dev_dbg(&mc13xxx->spidev->dev, "%s: request irq\n", __func__); mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE, mc13xxx_handler_adcdone, __func__, &adcdone_data); @@ -813,7 +819,8 @@ err_revision: mc13xxx_add_subdevice(mc13xxx, "%s-rtc"); if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN) - mc13xxx_add_subdevice(mc13xxx, "%s-ts"); + mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts", + &pdata->touch, sizeof(pdata->touch)); if (pdata) { mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator", diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 411f523d487..ffc3d48676a 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -162,7 +162,7 @@ int mfd_add_devices(struct device *parent, int id, atomic_t *cnts; /* initialize reference counting for all cells */ - cnts = kcalloc(sizeof(*cnts), n_devs, GFP_KERNEL); + cnts = kcalloc(n_devs, sizeof(*cnts), GFP_KERNEL); if (!cnts) return -ENOMEM; diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 68ac2c55d5a..95a2e546a48 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -170,7 +170,7 @@ struct usbhs_hcd_omap { /*-------------------------------------------------------------------------*/ const char usbhs_driver_name[] = USBHS_DRIVER_NAME; -static u64 usbhs_dmamask = ~(u32)0; +static u64 usbhs_dmamask = DMA_BIT_MASK(32); /*-------------------------------------------------------------------------*/ @@ -223,7 +223,7 @@ static struct platform_device *omap_usbhs_alloc_child(const char *name, } child->dev.dma_mask = &usbhs_dmamask; - child->dev.coherent_dma_mask = 0xffffffff; + dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32)); child->dev.parent = dev; ret = platform_device_add(child); @@ -799,14 +799,13 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) platform_set_drvdata(pdev, omap); + omap_usbhs_init(dev); ret = omap_usbhs_alloc_children(pdev); if (ret) { dev_err(dev, "omap_usbhs_alloc_children failed\n"); goto err_alloc; } - omap_usbhs_init(dev); - goto end_probe; err_alloc: diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index ff1a7e741ec..189c2f07b83 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -46,13 +46,7 @@ EXPORT_SYMBOL_GPL(pcf50633_read_block); int pcf50633_write_block(struct pcf50633 *pcf , u8 reg, int nr_regs, u8 *data) { - int ret; - - ret = regmap_raw_write(pcf->regmap, reg, data, nr_regs); - if (ret != 0) - return ret; - - return nr_regs; + return regmap_raw_write(pcf->regmap, reg, data, nr_regs); } EXPORT_SYMBOL_GPL(pcf50633_write_block); diff --git a/drivers/mfd/pcf50633-gpio.c b/drivers/mfd/pcf50633-gpio.c index 9ab19a8f669..d02ddf2ebd6 100644 --- a/drivers/mfd/pcf50633-gpio.c +++ b/drivers/mfd/pcf50633-gpio.c @@ -19,32 +19,7 @@ #include <linux/mfd/pcf50633/core.h> #include <linux/mfd/pcf50633/gpio.h> - -enum pcf50633_regulator_id { - PCF50633_REGULATOR_AUTO, - PCF50633_REGULATOR_DOWN1, - PCF50633_REGULATOR_DOWN2, - PCF50633_REGULATOR_LDO1, - PCF50633_REGULATOR_LDO2, - PCF50633_REGULATOR_LDO3, - PCF50633_REGULATOR_LDO4, - PCF50633_REGULATOR_LDO5, - PCF50633_REGULATOR_LDO6, - PCF50633_REGULATOR_HCLDO, - PCF50633_REGULATOR_MEMLDO, -}; - -#define PCF50633_REG_AUTOOUT 0x1a -#define PCF50633_REG_DOWN1OUT 0x1e -#define PCF50633_REG_DOWN2OUT 0x22 -#define PCF50633_REG_MEMLDOOUT 0x26 -#define PCF50633_REG_LDO1OUT 0x2d -#define PCF50633_REG_LDO2OUT 0x2f -#define PCF50633_REG_LDO3OUT 0x31 -#define PCF50633_REG_LDO4OUT 0x33 -#define PCF50633_REG_LDO5OUT 0x35 -#define PCF50633_REG_LDO6OUT 0x37 -#define PCF50633_REG_HCLDOOUT 0x39 +#include <linux/mfd/pcf50633/pmic.h> static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = { [PCF50633_REGULATOR_AUTO] = PCF50633_REG_AUTOOUT, diff --git a/drivers/mfd/pcf50633-irq.c b/drivers/mfd/pcf50633-irq.c index 048a3b903b0..498286cbb53 100644 --- a/drivers/mfd/pcf50633-irq.c +++ b/drivers/mfd/pcf50633-irq.c @@ -19,12 +19,7 @@ #include <linux/slab.h> #include <linux/mfd/pcf50633/core.h> - -/* Two MBCS registers used during cold start */ -#define PCF50633_REG_MBCS1 0x4b -#define PCF50633_REG_MBCS2 0x4c -#define PCF50633_MBCS1_USBPRES 0x01 -#define PCF50633_MBCS1_ADAPTPRES 0x01 +#include <linux/mfd/pcf50633/mbc.h> int pcf50633_register_irq(struct pcf50633 *pcf, int irq, void (*handler) (int, void *), void *data) diff --git a/drivers/mfd/rc5t583-irq.c b/drivers/mfd/rc5t583-irq.c new file mode 100644 index 00000000000..fa6f80fad5f --- /dev/null +++ b/drivers/mfd/rc5t583-irq.c @@ -0,0 +1,408 @@ +/* + * Interrupt driver for RICOH583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan <ldewangan@nvidia.com> + * + * based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mfd/rc5t583.h> + +enum int_type { + SYS_INT = 0x1, + DCDC_INT = 0x2, + RTC_INT = 0x4, + ADC_INT = 0x8, + GPIO_INT = 0x10, +}; + +static int gpedge_add[] = { + RC5T583_GPIO_GPEDGE2, + RC5T583_GPIO_GPEDGE2 +}; + +static int irq_en_add[] = { + RC5T583_INT_EN_SYS1, + RC5T583_INT_EN_SYS2, + RC5T583_INT_EN_DCDC, + RC5T583_INT_EN_RTC, + RC5T583_INT_EN_ADC1, + RC5T583_INT_EN_ADC2, + RC5T583_INT_EN_ADC3, + RC5T583_GPIO_EN_INT +}; + +static int irq_mon_add[] = { + RC5T583_INT_MON_SYS1, + RC5T583_INT_MON_SYS2, + RC5T583_INT_MON_DCDC, + RC5T583_INT_MON_RTC, + RC5T583_INT_IR_ADCL, + RC5T583_INT_IR_ADCH, + RC5T583_INT_IR_ADCEND, + RC5T583_INT_IR_GPIOF, + RC5T583_INT_IR_GPIOR +}; + +static int irq_clr_add[] = { + RC5T583_INT_IR_SYS1, + RC5T583_INT_IR_SYS2, + RC5T583_INT_IR_DCDC, + RC5T583_INT_IR_RTC, + RC5T583_INT_IR_ADCL, + RC5T583_INT_IR_ADCH, + RC5T583_INT_IR_ADCEND, + RC5T583_INT_IR_GPIOF, + RC5T583_INT_IR_GPIOR +}; + +static int main_int_type[] = { + SYS_INT, + SYS_INT, + DCDC_INT, + RTC_INT, + ADC_INT, + ADC_INT, + ADC_INT, + GPIO_INT, + GPIO_INT, +}; + +struct rc5t583_irq_data { + u8 int_type; + u8 master_bit; + u8 int_en_bit; + u8 mask_reg_index; + int grp_index; +}; + +#define RC5T583_IRQ(_int_type, _master_bit, _grp_index, \ + _int_bit, _mask_ind) \ + { \ + .int_type = _int_type, \ + .master_bit = _master_bit, \ + .grp_index = _grp_index, \ + .int_en_bit = _int_bit, \ + .mask_reg_index = _mask_ind, \ + } + +static const struct rc5t583_irq_data rc5t583_irqs[RC5T583_MAX_IRQS] = { + [RC5T583_IRQ_ONKEY] = RC5T583_IRQ(SYS_INT, 0, 0, 0, 0), + [RC5T583_IRQ_ACOK] = RC5T583_IRQ(SYS_INT, 0, 1, 1, 0), + [RC5T583_IRQ_LIDOPEN] = RC5T583_IRQ(SYS_INT, 0, 2, 2, 0), + [RC5T583_IRQ_PREOT] = RC5T583_IRQ(SYS_INT, 0, 3, 3, 0), + [RC5T583_IRQ_CLKSTP] = RC5T583_IRQ(SYS_INT, 0, 4, 4, 0), + [RC5T583_IRQ_ONKEY_OFF] = RC5T583_IRQ(SYS_INT, 0, 5, 5, 0), + [RC5T583_IRQ_WD] = RC5T583_IRQ(SYS_INT, 0, 7, 7, 0), + [RC5T583_IRQ_EN_PWRREQ1] = RC5T583_IRQ(SYS_INT, 0, 8, 0, 1), + [RC5T583_IRQ_EN_PWRREQ2] = RC5T583_IRQ(SYS_INT, 0, 9, 1, 1), + [RC5T583_IRQ_PRE_VINDET] = RC5T583_IRQ(SYS_INT, 0, 10, 2, 1), + + [RC5T583_IRQ_DC0LIM] = RC5T583_IRQ(DCDC_INT, 1, 0, 0, 2), + [RC5T583_IRQ_DC1LIM] = RC5T583_IRQ(DCDC_INT, 1, 1, 1, 2), + [RC5T583_IRQ_DC2LIM] = RC5T583_IRQ(DCDC_INT, 1, 2, 2, 2), + [RC5T583_IRQ_DC3LIM] = RC5T583_IRQ(DCDC_INT, 1, 3, 3, 2), + + [RC5T583_IRQ_CTC] = RC5T583_IRQ(RTC_INT, 2, 0, 0, 3), + [RC5T583_IRQ_YALE] = RC5T583_IRQ(RTC_INT, 2, 5, 5, 3), + [RC5T583_IRQ_DALE] = RC5T583_IRQ(RTC_INT, 2, 6, 6, 3), + [RC5T583_IRQ_WALE] = RC5T583_IRQ(RTC_INT, 2, 7, 7, 3), + + [RC5T583_IRQ_AIN1L] = RC5T583_IRQ(ADC_INT, 3, 0, 0, 4), + [RC5T583_IRQ_AIN2L] = RC5T583_IRQ(ADC_INT, 3, 1, 1, 4), + [RC5T583_IRQ_AIN3L] = RC5T583_IRQ(ADC_INT, 3, 2, 2, 4), + [RC5T583_IRQ_VBATL] = RC5T583_IRQ(ADC_INT, 3, 3, 3, 4), + [RC5T583_IRQ_VIN3L] = RC5T583_IRQ(ADC_INT, 3, 4, 4, 4), + [RC5T583_IRQ_VIN8L] = RC5T583_IRQ(ADC_INT, 3, 5, 5, 4), + [RC5T583_IRQ_AIN1H] = RC5T583_IRQ(ADC_INT, 3, 6, 0, 5), + [RC5T583_IRQ_AIN2H] = RC5T583_IRQ(ADC_INT, 3, 7, 1, 5), + [RC5T583_IRQ_AIN3H] = RC5T583_IRQ(ADC_INT, 3, 8, 2, 5), + [RC5T583_IRQ_VBATH] = RC5T583_IRQ(ADC_INT, 3, 9, 3, 5), + [RC5T583_IRQ_VIN3H] = RC5T583_IRQ(ADC_INT, 3, 10, 4, 5), + [RC5T583_IRQ_VIN8H] = RC5T583_IRQ(ADC_INT, 3, 11, 5, 5), + [RC5T583_IRQ_ADCEND] = RC5T583_IRQ(ADC_INT, 3, 12, 0, 6), + + [RC5T583_IRQ_GPIO0] = RC5T583_IRQ(GPIO_INT, 4, 0, 0, 7), + [RC5T583_IRQ_GPIO1] = RC5T583_IRQ(GPIO_INT, 4, 1, 1, 7), + [RC5T583_IRQ_GPIO2] = RC5T583_IRQ(GPIO_INT, 4, 2, 2, 7), + [RC5T583_IRQ_GPIO3] = RC5T583_IRQ(GPIO_INT, 4, 3, 3, 7), + [RC5T583_IRQ_GPIO4] = RC5T583_IRQ(GPIO_INT, 4, 4, 4, 7), + [RC5T583_IRQ_GPIO5] = RC5T583_IRQ(GPIO_INT, 4, 5, 5, 7), + [RC5T583_IRQ_GPIO6] = RC5T583_IRQ(GPIO_INT, 4, 6, 6, 7), + [RC5T583_IRQ_GPIO7] = RC5T583_IRQ(GPIO_INT, 4, 7, 7, 7), +}; + +static void rc5t583_irq_lock(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + mutex_lock(&rc5t583->irq_lock); +} + +static void rc5t583_irq_unmask(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + + rc5t583->group_irq_en[data->grp_index] |= 1 << data->grp_index; + rc5t583->intc_inten_reg |= 1 << data->master_bit; + rc5t583->irq_en_reg[data->mask_reg_index] |= 1 << data->int_en_bit; +} + +static void rc5t583_irq_mask(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + + rc5t583->group_irq_en[data->grp_index] &= ~(1 << data->grp_index); + if (!rc5t583->group_irq_en[data->grp_index]) + rc5t583->intc_inten_reg &= ~(1 << data->master_bit); + + rc5t583->irq_en_reg[data->mask_reg_index] &= ~(1 << data->int_en_bit); +} + +static int rc5t583_irq_set_type(struct irq_data *irq_data, unsigned int type) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + int val = 0; + int gpedge_index; + int gpedge_bit_pos; + + /* Supporting only trigger level inetrrupt */ + if ((data->int_type & GPIO_INT) && (type & IRQ_TYPE_EDGE_BOTH)) { + gpedge_index = data->int_en_bit / 4; + gpedge_bit_pos = data->int_en_bit % 4; + + if (type & IRQ_TYPE_EDGE_FALLING) + val |= 0x2; + + if (type & IRQ_TYPE_EDGE_RISING) + val |= 0x1; + + rc5t583->gpedge_reg[gpedge_index] &= ~(3 << gpedge_bit_pos); + rc5t583->gpedge_reg[gpedge_index] |= (val << gpedge_bit_pos); + rc5t583_irq_unmask(irq_data); + return 0; + } + return -EINVAL; +} + +static void rc5t583_irq_sync_unlock(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(rc5t583->gpedge_reg); i++) { + ret = rc5t583_write(rc5t583->dev, gpedge_add[i], + rc5t583->gpedge_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + gpedge_add[i], ret); + } + + for (i = 0; i < ARRAY_SIZE(rc5t583->irq_en_reg); i++) { + ret = rc5t583_write(rc5t583->dev, irq_en_add[i], + rc5t583->irq_en_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_en_add[i], ret); + } + + ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN, + rc5t583->intc_inten_reg); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + RC5T583_INTC_INTEN, ret); + + mutex_unlock(&rc5t583->irq_lock); +} +#ifdef CONFIG_PM_SLEEP +static int rc5t583_irq_set_wake(struct irq_data *irq_data, unsigned int on) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + return irq_set_irq_wake(rc5t583->chip_irq, on); +} +#else +#define rc5t583_irq_set_wake NULL +#endif + +static irqreturn_t rc5t583_irq(int irq, void *data) +{ + struct rc5t583 *rc5t583 = data; + uint8_t int_sts[RC5T583_MAX_INTERRUPT_MASK_REGS]; + uint8_t master_int; + int i; + int ret; + unsigned int rtc_int_sts = 0; + + /* Clear the status */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) + int_sts[i] = 0; + + ret = rc5t583_read(rc5t583->dev, RC5T583_INTC_INTMON, &master_int); + if (ret < 0) { + dev_err(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + RC5T583_INTC_INTMON, ret); + return IRQ_HANDLED; + } + + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; ++i) { + if (!(master_int & main_int_type[i])) + continue; + + ret = rc5t583_read(rc5t583->dev, irq_mon_add[i], &int_sts[i]); + if (ret < 0) { + dev_warn(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + irq_mon_add[i], ret); + int_sts[i] = 0; + continue; + } + + if (main_int_type[i] & RTC_INT) { + rtc_int_sts = 0; + if (int_sts[i] & 0x1) + rtc_int_sts |= BIT(6); + if (int_sts[i] & 0x2) + rtc_int_sts |= BIT(7); + if (int_sts[i] & 0x4) + rtc_int_sts |= BIT(0); + if (int_sts[i] & 0x8) + rtc_int_sts |= BIT(5); + } + + ret = rc5t583_write(rc5t583->dev, irq_clr_add[i], + ~int_sts[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + irq_clr_add[i], ret); + + if (main_int_type[i] & RTC_INT) + int_sts[i] = rtc_int_sts; + } + + /* Merge gpio interrupts for rising and falling case*/ + int_sts[7] |= int_sts[8]; + + /* Call interrupt handler if enabled */ + for (i = 0; i < RC5T583_MAX_IRQS; ++i) { + const struct rc5t583_irq_data *data = &rc5t583_irqs[i]; + if ((int_sts[data->mask_reg_index] & (1 << data->int_en_bit)) && + (rc5t583->group_irq_en[data->master_bit] & + (1 << data->grp_index))) + handle_nested_irq(rc5t583->irq_base + i); + } + + return IRQ_HANDLED; +} + +static struct irq_chip rc5t583_irq_chip = { + .name = "rc5t583-irq", + .irq_mask = rc5t583_irq_mask, + .irq_unmask = rc5t583_irq_unmask, + .irq_bus_lock = rc5t583_irq_lock, + .irq_bus_sync_unlock = rc5t583_irq_sync_unlock, + .irq_set_type = rc5t583_irq_set_type, + .irq_set_wake = rc5t583_irq_set_wake, +}; + +int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base) +{ + int i, ret; + + if (!irq_base) { + dev_warn(rc5t583->dev, "No interrupt support on IRQ base\n"); + return -EINVAL; + } + + mutex_init(&rc5t583->irq_lock); + + /* Initailize all int register to 0 */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) { + ret = rc5t583_write(rc5t583->dev, irq_en_add[i], + rc5t583->irq_en_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_en_add[i], ret); + } + + for (i = 0; i < RC5T583_MAX_GPEDGE_REG; i++) { + ret = rc5t583_write(rc5t583->dev, gpedge_add[i], + rc5t583->gpedge_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + gpedge_add[i], ret); + } + + ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + RC5T583_INTC_INTEN, ret); + + /* Clear all interrupts in case they woke up active. */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) { + ret = rc5t583_write(rc5t583->dev, irq_clr_add[i], 0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_clr_add[i], ret); + } + + rc5t583->irq_base = irq_base; + rc5t583->chip_irq = irq; + + for (i = 0; i < RC5T583_MAX_IRQS; i++) { + int __irq = i + rc5t583->irq_base; + irq_set_chip_data(__irq, rc5t583); + irq_set_chip_and_handler(__irq, &rc5t583_irq_chip, + handle_simple_irq); + irq_set_nested_thread(__irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(__irq, IRQF_VALID); +#endif + } + + ret = request_threaded_irq(irq, NULL, rc5t583_irq, IRQF_ONESHOT, + "rc5t583", rc5t583); + if (ret < 0) + dev_err(rc5t583->dev, + "Error in registering interrupt error: %d\n", ret); + return ret; +} + +int rc5t583_irq_exit(struct rc5t583 *rc5t583) +{ + if (rc5t583->chip_irq) + free_irq(rc5t583->chip_irq, rc5t583); + return 0; +} diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c new file mode 100644 index 00000000000..99ef944c621 --- /dev/null +++ b/drivers/mfd/rc5t583.c @@ -0,0 +1,386 @@ +/* + * Core driver access RC5T583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan <ldewangan@nvidia.com> + * + * Based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/rc5t583.h> +#include <linux/regmap.h> + +#define RICOH_ONOFFSEL_REG 0x10 +#define RICOH_SWCTL_REG 0x5E + +struct deepsleep_control_data { + u8 reg_add; + u8 ds_pos_bit; +}; + +#define DEEPSLEEP_INIT(_id, _reg, _pos) \ + { \ + .reg_add = RC5T583_##_reg, \ + .ds_pos_bit = _pos, \ + } + +static struct deepsleep_control_data deepsleep_data[] = { + DEEPSLEEP_INIT(DC0, SLPSEQ1, 0), + DEEPSLEEP_INIT(DC1, SLPSEQ1, 4), + DEEPSLEEP_INIT(DC2, SLPSEQ2, 0), + DEEPSLEEP_INIT(DC3, SLPSEQ2, 4), + DEEPSLEEP_INIT(LDO0, SLPSEQ3, 0), + DEEPSLEEP_INIT(LDO1, SLPSEQ3, 4), + DEEPSLEEP_INIT(LDO2, SLPSEQ4, 0), + DEEPSLEEP_INIT(LDO3, SLPSEQ4, 4), + DEEPSLEEP_INIT(LDO4, SLPSEQ5, 0), + DEEPSLEEP_INIT(LDO5, SLPSEQ5, 4), + DEEPSLEEP_INIT(LDO6, SLPSEQ6, 0), + DEEPSLEEP_INIT(LDO7, SLPSEQ6, 4), + DEEPSLEEP_INIT(LDO8, SLPSEQ7, 0), + DEEPSLEEP_INIT(LDO9, SLPSEQ7, 4), + DEEPSLEEP_INIT(PSO0, SLPSEQ8, 0), + DEEPSLEEP_INIT(PSO1, SLPSEQ8, 4), + DEEPSLEEP_INIT(PSO2, SLPSEQ9, 0), + DEEPSLEEP_INIT(PSO3, SLPSEQ9, 4), + DEEPSLEEP_INIT(PSO4, SLPSEQ10, 0), + DEEPSLEEP_INIT(PSO5, SLPSEQ10, 4), + DEEPSLEEP_INIT(PSO6, SLPSEQ11, 0), + DEEPSLEEP_INIT(PSO7, SLPSEQ11, 4), +}; + +#define EXT_PWR_REQ \ + (RC5T583_EXT_PWRREQ1_CONTROL | RC5T583_EXT_PWRREQ2_CONTROL) + +static struct mfd_cell rc5t583_subdevs[] = { + {.name = "rc5t583-regulator",}, + {.name = "rc5t583-rtc", }, + {.name = "rc5t583-key", } +}; + +int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_write(rc5t583->regmap, reg, val); +} + +int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + unsigned int ival; + int ret; + ret = regmap_read(rc5t583->regmap, reg, &ival); + if (!ret) + *val = (uint8_t)ival; + return ret; +} + +int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask); +} + +int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0); +} + +int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, mask, val); +} + +static int __rc5t583_set_ext_pwrreq1_control(struct device *dev, + int id, int ext_pwr, int slots) +{ + int ret; + uint8_t sleepseq_val; + unsigned int en_bit; + unsigned int slot_bit; + + if (id == RC5T583_DS_DC0) { + dev_err(dev, "PWRREQ1 is invalid control for rail %d\n", id); + return -EINVAL; + } + + en_bit = deepsleep_data[id].ds_pos_bit; + slot_bit = en_bit + 1; + ret = rc5t583_read(dev, deepsleep_data[id].reg_add, &sleepseq_val); + if (ret < 0) { + dev_err(dev, "Error in reading reg 0x%x\n", + deepsleep_data[id].reg_add); + return ret; + } + + sleepseq_val &= ~(0xF << en_bit); + sleepseq_val |= BIT(en_bit); + sleepseq_val |= ((slots & 0x7) << slot_bit); + ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(1)); + if (ret < 0) { + dev_err(dev, "Error in updating the 0x%02x register\n", + RICOH_ONOFFSEL_REG); + return ret; + } + + ret = rc5t583_write(dev, deepsleep_data[id].reg_add, sleepseq_val); + if (ret < 0) { + dev_err(dev, "Error in writing reg 0x%x\n", + deepsleep_data[id].reg_add); + return ret; + } + + if (id == RC5T583_DS_LDO4) { + ret = rc5t583_write(dev, RICOH_SWCTL_REG, 0x1); + if (ret < 0) + dev_err(dev, "Error in writing reg 0x%x\n", + RICOH_SWCTL_REG); + } + return ret; +} + +static int __rc5t583_set_ext_pwrreq2_control(struct device *dev, + int id, int ext_pwr) +{ + int ret; + + if (id != RC5T583_DS_DC0) { + dev_err(dev, "PWRREQ2 is invalid control for rail %d\n", id); + return -EINVAL; + } + + ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(2)); + if (ret < 0) + dev_err(dev, "Error in updating the ONOFFSEL 0x10 register\n"); + return ret; +} + +int rc5t583_ext_power_req_config(struct device *dev, int ds_id, + int ext_pwr_req, int deepsleep_slot_nr) +{ + if ((ext_pwr_req & EXT_PWR_REQ) == EXT_PWR_REQ) + return -EINVAL; + + if (ext_pwr_req & RC5T583_EXT_PWRREQ1_CONTROL) + return __rc5t583_set_ext_pwrreq1_control(dev, ds_id, + ext_pwr_req, deepsleep_slot_nr); + + if (ext_pwr_req & RC5T583_EXT_PWRREQ2_CONTROL) + return __rc5t583_set_ext_pwrreq2_control(dev, + ds_id, ext_pwr_req); + return 0; +} + +static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583, + struct rc5t583_platform_data *pdata) +{ + int ret; + int i; + uint8_t on_off_val = 0; + + /* Clear ONOFFSEL register */ + if (pdata->enable_shutdown) + on_off_val = 0x1; + + ret = rc5t583_write(rc5t583->dev, RICOH_ONOFFSEL_REG, on_off_val); + if (ret < 0) + dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n", + RICOH_ONOFFSEL_REG, ret); + + ret = rc5t583_write(rc5t583->dev, RICOH_SWCTL_REG, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n", + RICOH_SWCTL_REG, ret); + + /* Clear sleep sequence register */ + for (i = RC5T583_SLPSEQ1; i <= RC5T583_SLPSEQ11; ++i) { + ret = rc5t583_write(rc5t583->dev, i, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + i, ret); + } + return 0; +} + +static bool volatile_reg(struct device *dev, unsigned int reg) +{ + /* Enable caching in interrupt registers */ + switch (reg) { + case RC5T583_INT_EN_SYS1: + case RC5T583_INT_EN_SYS2: + case RC5T583_INT_EN_DCDC: + case RC5T583_INT_EN_RTC: + case RC5T583_INT_EN_ADC1: + case RC5T583_INT_EN_ADC2: + case RC5T583_INT_EN_ADC3: + case RC5T583_GPIO_GPEDGE1: + case RC5T583_GPIO_GPEDGE2: + case RC5T583_GPIO_EN_INT: + return false; + + case RC5T583_GPIO_MON_IOIN: + /* This is gpio input register */ + return true; + + default: + /* Enable caching in gpio registers */ + if ((reg >= RC5T583_GPIO_IOSEL) && + (reg <= RC5T583_GPIO_GPOFUNC)) + return false; + + /* Enable caching in sleep seq registers */ + if ((reg >= RC5T583_SLPSEQ1) && (reg <= RC5T583_SLPSEQ11)) + return false; + + /* Enable caching of regulator registers */ + if ((reg >= RC5T583_REG_DC0CTL) && (reg <= RC5T583_REG_SR3CTL)) + return false; + if ((reg >= RC5T583_REG_LDOEN1) && + (reg <= RC5T583_REG_LDO9DAC_DS)) + return false; + + break; + } + + return true; +} + +static const struct regmap_config rc5t583_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = volatile_reg, + .max_register = RC5T583_MAX_REGS, + .num_reg_defaults_raw = RC5T583_MAX_REGS, + .cache_type = REGCACHE_RBTREE, +}; + +static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct rc5t583 *rc5t583; + struct rc5t583_platform_data *pdata = i2c->dev.platform_data; + int ret; + bool irq_init_success = false; + + if (!pdata) { + dev_err(&i2c->dev, "Err: Platform data not found\n"); + return -EINVAL; + } + + rc5t583 = devm_kzalloc(&i2c->dev, sizeof(struct rc5t583), GFP_KERNEL); + if (!rc5t583) { + dev_err(&i2c->dev, "Memory allocation failed\n"); + return -ENOMEM; + } + + rc5t583->dev = &i2c->dev; + i2c_set_clientdata(i2c, rc5t583); + + rc5t583->regmap = regmap_init_i2c(i2c, &rc5t583_regmap_config); + if (IS_ERR(rc5t583->regmap)) { + ret = PTR_ERR(rc5t583->regmap); + dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret); + return ret; + } + + ret = rc5t583_clear_ext_power_req(rc5t583, pdata); + if (ret < 0) + goto err_irq_init; + + if (i2c->irq) { + ret = rc5t583_irq_init(rc5t583, i2c->irq, pdata->irq_base); + /* Still continue with waring if irq init fails */ + if (ret) + dev_warn(&i2c->dev, "IRQ init failed: %d\n", ret); + else + irq_init_success = true; + } + + ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs, + ARRAY_SIZE(rc5t583_subdevs), NULL, 0); + if (ret) { + dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret); + goto err_add_devs; + } + + return 0; + +err_add_devs: + if (irq_init_success) + rc5t583_irq_exit(rc5t583); +err_irq_init: + regmap_exit(rc5t583->regmap); + return ret; +} + +static int __devexit rc5t583_i2c_remove(struct i2c_client *i2c) +{ + struct rc5t583 *rc5t583 = i2c_get_clientdata(i2c); + + mfd_remove_devices(rc5t583->dev); + rc5t583_irq_exit(rc5t583); + regmap_exit(rc5t583->regmap); + return 0; +} + +static const struct i2c_device_id rc5t583_i2c_id[] = { + {.name = "rc5t583", .driver_data = 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, rc5t583_i2c_id); + +static struct i2c_driver rc5t583_i2c_driver = { + .driver = { + .name = "rc5t583", + .owner = THIS_MODULE, + }, + .probe = rc5t583_i2c_probe, + .remove = __devexit_p(rc5t583_i2c_remove), + .id_table = rc5t583_i2c_id, +}; + +static int __init rc5t583_i2c_init(void) +{ + return i2c_add_driver(&rc5t583_i2c_driver); +} +subsys_initcall(rc5t583_i2c_init); + +static void __exit rc5t583_i2c_exit(void) +{ + i2c_del_driver(&rc5t583_i2c_driver); +} + +module_exit(rc5t583_i2c_exit); + +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_DESCRIPTION("RICOH RC5T583 power management system device driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/s5m-core.c b/drivers/mfd/s5m-core.c index caadabeed8e..48949d998d1 100644 --- a/drivers/mfd/s5m-core.c +++ b/drivers/mfd/s5m-core.c @@ -26,7 +26,27 @@ #include <linux/mfd/s5m87xx/s5m-rtc.h> #include <linux/regmap.h> -static struct mfd_cell s5m87xx_devs[] = { +static struct mfd_cell s5m8751_devs[] = { + { + .name = "s5m8751-pmic", + }, { + .name = "s5m-charger", + }, { + .name = "s5m8751-codec", + }, +}; + +static struct mfd_cell s5m8763_devs[] = { + { + .name = "s5m8763-pmic", + }, { + .name = "s5m-rtc", + }, { + .name = "s5m-charger", + }, +}; + +static struct mfd_cell s5m8767_devs[] = { { .name = "s5m8767-pmic", }, { @@ -42,7 +62,7 @@ EXPORT_SYMBOL_GPL(s5m_reg_read); int s5m_bulk_read(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf) { - return regmap_bulk_read(s5m87xx->regmap, reg, buf, count);; + return regmap_bulk_read(s5m87xx->regmap, reg, buf, count); } EXPORT_SYMBOL_GPL(s5m_bulk_read); @@ -54,7 +74,7 @@ EXPORT_SYMBOL_GPL(s5m_reg_write); int s5m_bulk_write(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf) { - return regmap_raw_write(s5m87xx->regmap, reg, buf, count * sizeof(u16)); + return regmap_raw_write(s5m87xx->regmap, reg, buf, count); } EXPORT_SYMBOL_GPL(s5m_bulk_write); @@ -74,10 +94,10 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c, { struct s5m_platform_data *pdata = i2c->dev.platform_data; struct s5m87xx_dev *s5m87xx; - int ret = 0; - int error; + int ret; - s5m87xx = kzalloc(sizeof(struct s5m87xx_dev), GFP_KERNEL); + s5m87xx = devm_kzalloc(&i2c->dev, sizeof(struct s5m87xx_dev), + GFP_KERNEL); if (s5m87xx == NULL) return -ENOMEM; @@ -96,9 +116,9 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c, s5m87xx->regmap = regmap_init_i2c(i2c, &s5m_regmap_config); if (IS_ERR(s5m87xx->regmap)) { - error = PTR_ERR(s5m87xx->regmap); + ret = PTR_ERR(s5m87xx->regmap); dev_err(&i2c->dev, "Failed to allocate register map: %d\n", - error); + ret); goto err; } @@ -112,9 +132,23 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c, pm_runtime_set_active(s5m87xx->dev); - ret = mfd_add_devices(s5m87xx->dev, -1, - s5m87xx_devs, ARRAY_SIZE(s5m87xx_devs), - NULL, 0); + switch (s5m87xx->device_type) { + case S5M8751X: + ret = mfd_add_devices(s5m87xx->dev, -1, s5m8751_devs, + ARRAY_SIZE(s5m8751_devs), NULL, 0); + break; + case S5M8763X: + ret = mfd_add_devices(s5m87xx->dev, -1, s5m8763_devs, + ARRAY_SIZE(s5m8763_devs), NULL, 0); + break; + case S5M8767X: + ret = mfd_add_devices(s5m87xx->dev, -1, s5m8767_devs, + ARRAY_SIZE(s5m8767_devs), NULL, 0); + break; + default: + /* If this happens the probe function is problem */ + BUG(); + } if (ret < 0) goto err; @@ -126,7 +160,6 @@ err: s5m_irq_exit(s5m87xx); i2c_unregister_device(s5m87xx->rtc); regmap_exit(s5m87xx->regmap); - kfree(s5m87xx); return ret; } @@ -138,7 +171,6 @@ static int s5m87xx_i2c_remove(struct i2c_client *i2c) s5m_irq_exit(s5m87xx); i2c_unregister_device(s5m87xx->rtc); regmap_exit(s5m87xx->regmap); - kfree(s5m87xx); return 0; } diff --git a/drivers/mfd/s5m-irq.c b/drivers/mfd/s5m-irq.c index de76dfb6f0a..0236676085c 100644 --- a/drivers/mfd/s5m-irq.c +++ b/drivers/mfd/s5m-irq.c @@ -342,7 +342,10 @@ int s5m_irq_resume(struct s5m87xx_dev *s5m87xx) s5m8767_irq_thread(s5m87xx->irq_base, s5m87xx); break; default: - break; + dev_err(s5m87xx->dev, + "Unknown device type %d\n", + s5m87xx->device_type); + return -EINVAL; } } @@ -444,7 +447,9 @@ int s5m_irq_init(struct s5m87xx_dev *s5m87xx) } break; default: - break; + dev_err(s5m87xx->dev, + "Unknown device type %d\n", s5m87xx->device_type); + return -EINVAL; } if (!s5m87xx->ono) @@ -467,12 +472,15 @@ int s5m_irq_init(struct s5m87xx_dev *s5m87xx) IRQF_ONESHOT, "s5m87xx-ono", s5m87xx); break; default: + ret = -EINVAL; break; } - if (ret) + if (ret) { dev_err(s5m87xx->dev, "Failed to request IRQ %d: %d\n", s5m87xx->ono, ret); + return ret; + } return 0; } diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index f4d86117f44..d927dd49acb 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -387,14 +387,6 @@ int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to) EXPORT_SYMBOL_GPL(sm501_unit_power); - -/* Perform a rounded division. */ -static long sm501fb_round_div(long num, long denom) -{ - /* n / d + 1 / 2 = (2n + d) / 2d */ - return (2 * num + denom) / (2 * denom); -} - /* clock value structure. */ struct sm501_clock { unsigned long mclk; @@ -428,7 +420,7 @@ static int sm501_calc_clock(unsigned long freq, /* try all 8 shift values.*/ for (shift = 0; shift < 8; shift++) { /* Calculate difference to requested clock */ - diff = sm501fb_round_div(mclk, divider << shift) - freq; + diff = DIV_ROUND_CLOSEST(mclk, divider << shift) - freq; if (diff < 0) diff = -diff; diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index e07947e56b2..2dd8d49cb30 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -298,6 +298,11 @@ static struct mfd_cell stmpe_gpio_cell = { .num_resources = ARRAY_SIZE(stmpe_gpio_resources), }; +static struct mfd_cell stmpe_gpio_cell_noirq = { + .name = "stmpe-gpio", + /* gpio cell resources consist of an irq only so no resources here */ +}; + /* * Keypad (1601, 2401, 2403) */ @@ -346,6 +351,13 @@ static struct stmpe_variant_block stmpe801_blocks[] = { }, }; +static struct stmpe_variant_block stmpe801_blocks_noirq[] = { + { + .cell = &stmpe_gpio_cell_noirq, + .block = STMPE_BLOCK_GPIO, + }, +}; + static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks, bool enable) { @@ -367,6 +379,17 @@ static struct stmpe_variant_info stmpe801 = { .enable = stmpe801_enable, }; +static struct stmpe_variant_info stmpe801_noirq = { + .name = "stmpe801", + .id_val = STMPE801_ID, + .id_mask = 0xffff, + .num_gpios = 8, + .regs = stmpe801_regs, + .blocks = stmpe801_blocks_noirq, + .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq), + .enable = stmpe801_enable, +}; + /* * Touchscreen (STMPE811 or STMPE610) */ @@ -712,7 +735,7 @@ static struct stmpe_variant_info stmpe2403 = { .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */ }; -static struct stmpe_variant_info *stmpe_variant_info[] = { +static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = { [STMPE610] = &stmpe610, [STMPE801] = &stmpe801, [STMPE811] = &stmpe811, @@ -721,6 +744,16 @@ static struct stmpe_variant_info *stmpe_variant_info[] = { [STMPE2403] = &stmpe2403, }; +/* + * These devices can be connected in a 'no-irq' configuration - the irq pin + * is not used and the device cannot interrupt the CPU. Here we only list + * devices which support this configuration - the driver will fail probing + * for any devices not listed here which are configured in this way. + */ +static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = { + [STMPE801] = &stmpe801_noirq, +}; + static irqreturn_t stmpe_irq(int irq, void *data) { struct stmpe *stmpe = data; @@ -864,7 +897,7 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe) unsigned int irq_trigger = stmpe->pdata->irq_trigger; int autosleep_timeout = stmpe->pdata->autosleep_timeout; struct stmpe_variant_info *variant = stmpe->variant; - u8 icr; + u8 icr = 0; unsigned int id; u8 data[2]; int ret; @@ -887,31 +920,33 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe) if (ret) return ret; - if (id == STMPE801_ID) - icr = STMPE801_REG_SYS_CTRL_INT_EN; - else - icr = STMPE_ICR_LSB_GIM; - - /* STMPE801 doesn't support Edge interrupts */ - if (id != STMPE801_ID) { - if (irq_trigger == IRQF_TRIGGER_FALLING || - irq_trigger == IRQF_TRIGGER_RISING) - icr |= STMPE_ICR_LSB_EDGE; - } - - if (irq_trigger == IRQF_TRIGGER_RISING || - irq_trigger == IRQF_TRIGGER_HIGH) { + if (stmpe->irq >= 0) { if (id == STMPE801_ID) - icr |= STMPE801_REG_SYS_CTRL_INT_HI; + icr = STMPE801_REG_SYS_CTRL_INT_EN; else - icr |= STMPE_ICR_LSB_HIGH; - } + icr = STMPE_ICR_LSB_GIM; - if (stmpe->pdata->irq_invert_polarity) { - if (id == STMPE801_ID) - icr ^= STMPE801_REG_SYS_CTRL_INT_HI; - else - icr ^= STMPE_ICR_LSB_HIGH; + /* STMPE801 doesn't support Edge interrupts */ + if (id != STMPE801_ID) { + if (irq_trigger == IRQF_TRIGGER_FALLING || + irq_trigger == IRQF_TRIGGER_RISING) + icr |= STMPE_ICR_LSB_EDGE; + } + + if (irq_trigger == IRQF_TRIGGER_RISING || + irq_trigger == IRQF_TRIGGER_HIGH) { + if (id == STMPE801_ID) + icr |= STMPE801_REG_SYS_CTRL_INT_HI; + else + icr |= STMPE_ICR_LSB_HIGH; + } + + if (stmpe->pdata->irq_invert_polarity) { + if (id == STMPE801_ID) + icr ^= STMPE801_REG_SYS_CTRL_INT_HI; + else + icr ^= STMPE_ICR_LSB_HIGH; + } } if (stmpe->pdata->autosleep) { @@ -1001,19 +1036,38 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum) stmpe->irq = ci->irq; } + if (stmpe->irq < 0) { + /* use alternate variant info for no-irq mode, if supported */ + dev_info(stmpe->dev, + "%s configured in no-irq mode by platform data\n", + stmpe->variant->name); + if (!stmpe_noirq_variant_info[stmpe->partnum]) { + dev_err(stmpe->dev, + "%s does not support no-irq mode!\n", + stmpe->variant->name); + ret = -ENODEV; + goto free_gpio; + } + stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum]; + } + ret = stmpe_chip_init(stmpe); if (ret) goto free_gpio; - ret = stmpe_irq_init(stmpe); - if (ret) - goto free_gpio; + if (stmpe->irq >= 0) { + ret = stmpe_irq_init(stmpe); + if (ret) + goto free_gpio; - ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq, - pdata->irq_trigger | IRQF_ONESHOT, "stmpe", stmpe); - if (ret) { - dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret); - goto out_removeirq; + ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq, + pdata->irq_trigger | IRQF_ONESHOT, + "stmpe", stmpe); + if (ret) { + dev_err(stmpe->dev, "failed to request IRQ: %d\n", + ret); + goto out_removeirq; + } } ret = stmpe_devices_init(stmpe); @@ -1026,9 +1080,11 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum) out_removedevs: mfd_remove_devices(stmpe->dev); - free_irq(stmpe->irq, stmpe); + if (stmpe->irq >= 0) + free_irq(stmpe->irq, stmpe); out_removeirq: - stmpe_irq_remove(stmpe); + if (stmpe->irq >= 0) + stmpe_irq_remove(stmpe); free_gpio: if (pdata->irq_over_gpio) gpio_free(pdata->irq_gpio); @@ -1041,8 +1097,10 @@ int stmpe_remove(struct stmpe *stmpe) { mfd_remove_devices(stmpe->dev); - free_irq(stmpe->irq, stmpe); - stmpe_irq_remove(stmpe); + if (stmpe->irq >= 0) { + free_irq(stmpe->irq, stmpe); + stmpe_irq_remove(stmpe); + } if (stmpe->pdata->irq_over_gpio) gpio_free(stmpe->pdata->irq_gpio); @@ -1057,7 +1115,7 @@ static int stmpe_suspend(struct device *dev) { struct stmpe *stmpe = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) + if (stmpe->irq >= 0 && device_may_wakeup(dev)) enable_irq_wake(stmpe->irq); return 0; @@ -1067,7 +1125,7 @@ static int stmpe_resume(struct device *dev) { struct stmpe *stmpe = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) + if (stmpe->irq >= 0 && device_may_wakeup(dev)) disable_irq_wake(stmpe->irq); return 0; diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c new file mode 100644 index 00000000000..a66d4df5129 --- /dev/null +++ b/drivers/mfd/tps65090.c @@ -0,0 +1,387 @@ +/* + * Core driver for TI TPS65090 PMIC family + * + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/tps65090.h> +#include <linux/regmap.h> +#include <linux/err.h> + +#define NUM_INT_REG 2 +#define TOTAL_NUM_REG 0x18 + +/* interrupt status registers */ +#define TPS65090_INT_STS 0x0 +#define TPS65090_INT_STS2 0x1 + +/* interrupt mask registers */ +#define TPS65090_INT_MSK 0x2 +#define TPS65090_INT_MSK2 0x3 + +struct tps65090_irq_data { + u8 mask_reg; + u8 mask_pos; +}; + +#define TPS65090_IRQ(_reg, _mask_pos) \ + { \ + .mask_reg = (_reg), \ + .mask_pos = (_mask_pos), \ + } + +static const struct tps65090_irq_data tps65090_irqs[] = { + [0] = TPS65090_IRQ(0, 0), + [1] = TPS65090_IRQ(0, 1), + [2] = TPS65090_IRQ(0, 2), + [3] = TPS65090_IRQ(0, 3), + [4] = TPS65090_IRQ(0, 4), + [5] = TPS65090_IRQ(0, 5), + [6] = TPS65090_IRQ(0, 6), + [7] = TPS65090_IRQ(0, 7), + [8] = TPS65090_IRQ(1, 0), + [9] = TPS65090_IRQ(1, 1), + [10] = TPS65090_IRQ(1, 2), + [11] = TPS65090_IRQ(1, 3), + [12] = TPS65090_IRQ(1, 4), + [13] = TPS65090_IRQ(1, 5), + [14] = TPS65090_IRQ(1, 6), + [15] = TPS65090_IRQ(1, 7), +}; + +static struct mfd_cell tps65090s[] = { + { + .name = "tps65910-pmic", + }, + { + .name = "tps65910-regulator", + }, +}; + +struct tps65090 { + struct mutex lock; + struct device *dev; + struct i2c_client *client; + struct regmap *rmap; + struct irq_chip irq_chip; + struct mutex irq_lock; + int irq_base; + unsigned int id; +}; + +int tps65090_write(struct device *dev, int reg, uint8_t val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + return regmap_write(tps->rmap, reg, val); +} +EXPORT_SYMBOL_GPL(tps65090_write); + +int tps65090_read(struct device *dev, int reg, uint8_t *val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + unsigned int temp_val; + int ret; + ret = regmap_read(tps->rmap, reg, &temp_val); + if (!ret) + *val = temp_val; + return ret; +} +EXPORT_SYMBOL_GPL(tps65090_read); + +int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), ~0u); +} +EXPORT_SYMBOL_GPL(tps65090_set_bits); + +int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), 0u); +} +EXPORT_SYMBOL_GPL(tps65090_clr_bits); + +static void tps65090_irq_lock(struct irq_data *data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(data); + + mutex_lock(&tps65090->irq_lock); +} + +static void tps65090_irq_mask(struct irq_data *irq_data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->hwirq; + const struct tps65090_irq_data *data = &tps65090_irqs[__irq]; + + tps65090_set_bits(tps65090->dev, (TPS65090_INT_MSK + data->mask_reg), + data->mask_pos); +} + +static void tps65090_irq_unmask(struct irq_data *irq_data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - tps65090->irq_base; + const struct tps65090_irq_data *data = &tps65090_irqs[__irq]; + + tps65090_clr_bits(tps65090->dev, (TPS65090_INT_MSK + data->mask_reg), + data->mask_pos); +} + +static void tps65090_irq_sync_unlock(struct irq_data *data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(data); + + mutex_unlock(&tps65090->irq_lock); +} + +static irqreturn_t tps65090_irq(int irq, void *data) +{ + struct tps65090 *tps65090 = data; + int ret = 0; + u8 status, mask; + unsigned long int acks = 0; + int i; + + for (i = 0; i < NUM_INT_REG; i++) { + ret = tps65090_read(tps65090->dev, TPS65090_INT_MSK + i, &mask); + if (ret < 0) { + dev_err(tps65090->dev, + "failed to read mask reg [addr:%d]\n", + TPS65090_INT_MSK + i); + return IRQ_NONE; + } + ret = tps65090_read(tps65090->dev, TPS65090_INT_STS + i, + &status); + if (ret < 0) { + dev_err(tps65090->dev, + "failed to read status reg [addr:%d]\n", + TPS65090_INT_STS + i); + return IRQ_NONE; + } + if (status) { + /* Ack only those interrupts which are not masked */ + status &= (~mask); + ret = tps65090_write(tps65090->dev, + TPS65090_INT_STS + i, status); + if (ret < 0) { + dev_err(tps65090->dev, + "failed to write interrupt status\n"); + return IRQ_NONE; + } + acks |= (status << (i * 8)); + } + } + + for_each_set_bit(i, &acks, ARRAY_SIZE(tps65090_irqs)) + handle_nested_irq(tps65090->irq_base + i); + return acks ? IRQ_HANDLED : IRQ_NONE; +} + +static int __devinit tps65090_irq_init(struct tps65090 *tps65090, int irq, + int irq_base) +{ + int i, ret; + + if (!irq_base) { + dev_err(tps65090->dev, "IRQ base not set\n"); + return -EINVAL; + } + + mutex_init(&tps65090->irq_lock); + + for (i = 0; i < NUM_INT_REG; i++) + tps65090_write(tps65090->dev, TPS65090_INT_MSK + i, 0xFF); + + for (i = 0; i < NUM_INT_REG; i++) + tps65090_write(tps65090->dev, TPS65090_INT_STS + i, 0xff); + + tps65090->irq_base = irq_base; + tps65090->irq_chip.name = "tps65090"; + tps65090->irq_chip.irq_mask = tps65090_irq_mask; + tps65090->irq_chip.irq_unmask = tps65090_irq_unmask; + tps65090->irq_chip.irq_bus_lock = tps65090_irq_lock; + tps65090->irq_chip.irq_bus_sync_unlock = tps65090_irq_sync_unlock; + + for (i = 0; i < ARRAY_SIZE(tps65090_irqs); i++) { + int __irq = i + tps65090->irq_base; + irq_set_chip_data(__irq, tps65090); + irq_set_chip_and_handler(__irq, &tps65090->irq_chip, + handle_simple_irq); + irq_set_nested_thread(__irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(__irq, IRQF_VALID); +#endif + } + + ret = request_threaded_irq(irq, NULL, tps65090_irq, IRQF_ONESHOT, + "tps65090", tps65090); + if (!ret) { + device_init_wakeup(tps65090->dev, 1); + enable_irq_wake(irq); + } + + return ret; +} + +static bool is_volatile_reg(struct device *dev, unsigned int reg) +{ + if ((reg == TPS65090_INT_STS) || (reg == TPS65090_INT_STS)) + return true; + else + return false; +} + +static const struct regmap_config tps65090_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TOTAL_NUM_REG, + .num_reg_defaults_raw = TOTAL_NUM_REG, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = is_volatile_reg, +}; + +static int __devinit tps65090_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tps65090_platform_data *pdata = client->dev.platform_data; + struct tps65090 *tps65090; + int ret; + + if (!pdata) { + dev_err(&client->dev, "tps65090 requires platform data\n"); + return -EINVAL; + } + + tps65090 = devm_kzalloc(&client->dev, sizeof(struct tps65090), + GFP_KERNEL); + if (tps65090 == NULL) + return -ENOMEM; + + tps65090->client = client; + tps65090->dev = &client->dev; + i2c_set_clientdata(client, tps65090); + + mutex_init(&tps65090->lock); + + if (client->irq) { + ret = tps65090_irq_init(tps65090, client->irq, pdata->irq_base); + if (ret) { + dev_err(&client->dev, "IRQ init failed with err: %d\n", + ret); + goto err_exit; + } + } + + tps65090->rmap = regmap_init_i2c(tps65090->client, + &tps65090_regmap_config); + if (IS_ERR(tps65090->rmap)) { + dev_err(&client->dev, "regmap_init failed with err: %ld\n", + PTR_ERR(tps65090->rmap)); + goto err_irq_exit; + }; + + ret = mfd_add_devices(tps65090->dev, -1, tps65090s, + ARRAY_SIZE(tps65090s), NULL, 0); + if (ret) { + dev_err(&client->dev, "add mfd devices failed with err: %d\n", + ret); + goto err_regmap_exit; + } + + return 0; + +err_regmap_exit: + regmap_exit(tps65090->rmap); + +err_irq_exit: + if (client->irq) + free_irq(client->irq, tps65090); +err_exit: + return ret; +} + +static int __devexit tps65090_i2c_remove(struct i2c_client *client) +{ + struct tps65090 *tps65090 = i2c_get_clientdata(client); + + mfd_remove_devices(tps65090->dev); + regmap_exit(tps65090->rmap); + if (client->irq) + free_irq(client->irq, tps65090); + + return 0; +} + +#ifdef CONFIG_PM +static int tps65090_i2c_suspend(struct i2c_client *client, pm_message_t state) +{ + if (client->irq) + disable_irq(client->irq); + return 0; +} + +static int tps65090_i2c_resume(struct i2c_client *client) +{ + if (client->irq) + enable_irq(client->irq); + return 0; +} +#endif + +static const struct i2c_device_id tps65090_id_table[] = { + { "tps65090", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, tps65090_id_table); + +static struct i2c_driver tps65090_driver = { + .driver = { + .name = "tps65090", + .owner = THIS_MODULE, + }, + .probe = tps65090_i2c_probe, + .remove = __devexit_p(tps65090_i2c_remove), +#ifdef CONFIG_PM + .suspend = tps65090_i2c_suspend, + .resume = tps65090_i2c_resume, +#endif + .id_table = tps65090_id_table, +}; + +static int __init tps65090_init(void) +{ + return i2c_add_driver(&tps65090_driver); +} +subsys_initcall(tps65090_init); + +static void __exit tps65090_exit(void) +{ + i2c_del_driver(&tps65090_driver); +} +module_exit(tps65090_exit); + +MODULE_DESCRIPTION("TPS65090 core driver"); +MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c new file mode 100644 index 00000000000..f7d854e4cc6 --- /dev/null +++ b/drivers/mfd/tps65217.c @@ -0,0 +1,242 @@ +/* + * tps65217.c + * + * TPS65217 chip family multi-function driver + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/regmap.h> +#include <linux/err.h> + +#include <linux/mfd/core.h> +#include <linux/mfd/tps65217.h> + +/** + * tps65217_reg_read: Read a single tps65217 register. + * + * @tps: Device to read from. + * @reg: Register to read. + * @val: Contians the value + */ +int tps65217_reg_read(struct tps65217 *tps, unsigned int reg, + unsigned int *val) +{ + return regmap_read(tps->regmap, reg, val); +} +EXPORT_SYMBOL_GPL(tps65217_reg_read); + +/** + * tps65217_reg_write: Write a single tps65217 register. + * + * @tps65217: Device to write to. + * @reg: Register to write to. + * @val: Value to write. + * @level: Password protected level + */ +int tps65217_reg_write(struct tps65217 *tps, unsigned int reg, + unsigned int val, unsigned int level) +{ + int ret; + unsigned int xor_reg_val; + + switch (level) { + case TPS65217_PROTECT_NONE: + return regmap_write(tps->regmap, reg, val); + case TPS65217_PROTECT_L1: + xor_reg_val = reg ^ TPS65217_PASSWORD_REGS_UNLOCK; + ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD, + xor_reg_val); + if (ret < 0) + return ret; + + return regmap_write(tps->regmap, reg, val); + case TPS65217_PROTECT_L2: + xor_reg_val = reg ^ TPS65217_PASSWORD_REGS_UNLOCK; + ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD, + xor_reg_val); + if (ret < 0) + return ret; + ret = regmap_write(tps->regmap, reg, val); + if (ret < 0) + return ret; + ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD, + xor_reg_val); + if (ret < 0) + return ret; + return regmap_write(tps->regmap, reg, val); + default: + return -EINVAL; + } +} +EXPORT_SYMBOL_GPL(tps65217_reg_write); + +/** + * tps65217_update_bits: Modify bits w.r.t mask, val and level. + * + * @tps65217: Device to write to. + * @reg: Register to read-write to. + * @mask: Mask. + * @val: Value to write. + * @level: Password protected level + */ +int tps65217_update_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level) +{ + int ret; + unsigned int data; + + ret = tps65217_reg_read(tps, reg, &data); + if (ret) { + dev_err(tps->dev, "Read from reg 0x%x failed\n", reg); + return ret; + } + + data &= ~mask; + data |= val & mask; + + ret = tps65217_reg_write(tps, reg, data, level); + if (ret) + dev_err(tps->dev, "Write for reg 0x%x failed\n", reg); + + return ret; +} + +int tps65217_set_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level) +{ + return tps65217_update_bits(tps, reg, mask, val, level); +} +EXPORT_SYMBOL_GPL(tps65217_set_bits); + +int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int level) +{ + return tps65217_update_bits(tps, reg, mask, 0, level); +} +EXPORT_SYMBOL_GPL(tps65217_clear_bits); + +static struct regmap_config tps65217_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int __devinit tps65217_probe(struct i2c_client *client, + const struct i2c_device_id *ids) +{ + struct tps65217 *tps; + struct tps65217_board *pdata = client->dev.platform_data; + int i, ret; + unsigned int version; + + tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); + if (!tps) + return -ENOMEM; + + tps->pdata = pdata; + tps->regmap = regmap_init_i2c(client, &tps65217_regmap_config); + if (IS_ERR(tps->regmap)) { + ret = PTR_ERR(tps->regmap); + dev_err(tps->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + i2c_set_clientdata(client, tps); + tps->dev = &client->dev; + + ret = tps65217_reg_read(tps, TPS65217_REG_CHIPID, &version); + if (ret < 0) { + dev_err(tps->dev, "Failed to read revision" + " register: %d\n", ret); + goto err_regmap; + } + + dev_info(tps->dev, "TPS65217 ID %#x version 1.%d\n", + (version & TPS65217_CHIPID_CHIP_MASK) >> 4, + version & TPS65217_CHIPID_REV_MASK); + + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) { + struct platform_device *pdev; + + pdev = platform_device_alloc("tps65217-pmic", i); + if (!pdev) { + dev_err(tps->dev, "Cannot create regulator %d\n", i); + continue; + } + + pdev->dev.parent = tps->dev; + platform_device_add_data(pdev, &pdata->tps65217_init_data[i], + sizeof(pdata->tps65217_init_data[i])); + tps->regulator_pdev[i] = pdev; + + platform_device_add(pdev); + } + + return 0; + +err_regmap: + regmap_exit(tps->regmap); + + return ret; +} + +static int __devexit tps65217_remove(struct i2c_client *client) +{ + struct tps65217 *tps = i2c_get_clientdata(client); + int i; + + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) + platform_device_unregister(tps->regulator_pdev[i]); + + regmap_exit(tps->regmap); + + return 0; +} + +static const struct i2c_device_id tps65217_id_table[] = { + {"tps65217", 0xF0}, + {/* end of list */} +}; +MODULE_DEVICE_TABLE(i2c, tps65217_id_table); + +static struct i2c_driver tps65217_driver = { + .driver = { + .name = "tps65217", + }, + .id_table = tps65217_id_table, + .probe = tps65217_probe, + .remove = __devexit_p(tps65217_remove), +}; + +static int __init tps65217_init(void) +{ + return i2c_add_driver(&tps65217_driver); +} +subsys_initcall(tps65217_init); + +static void __exit tps65217_exit(void) +{ + i2c_del_driver(&tps65217_driver); +} +module_exit(tps65217_exit); + +MODULE_AUTHOR("AnilKumar Ch <anilkumar@ti.com>"); +MODULE_DESCRIPTION("TPS65217 chip family multi-function driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/tps65910-irq.c b/drivers/mfd/tps65910-irq.c index 95c0d7978be..c9ed5c00a62 100644 --- a/drivers/mfd/tps65910-irq.c +++ b/drivers/mfd/tps65910-irq.c @@ -145,12 +145,23 @@ static void tps65910_irq_disable(struct irq_data *data) tps65910->irq_mask |= ( 1 << irq_to_tps65910_irq(tps65910, data->irq)); } +#ifdef CONFIG_PM_SLEEP +static int tps65910_irq_set_wake(struct irq_data *data, unsigned int enable) +{ + struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data); + return irq_set_irq_wake(tps65910->chip_irq, enable); +} +#else +#define tps65910_irq_set_wake NULL +#endif + static struct irq_chip tps65910_irq_chip = { .name = "tps65910", .irq_bus_lock = tps65910_irq_lock, .irq_bus_sync_unlock = tps65910_irq_sync_unlock, .irq_disable = tps65910_irq_disable, .irq_enable = tps65910_irq_enable, + .irq_set_wake = tps65910_irq_set_wake, }; int tps65910_irq_init(struct tps65910 *tps65910, int irq, diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 4392f6bca15..bf2b25ebf2c 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -16,10 +16,12 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> +#include <linux/err.h> #include <linux/slab.h> #include <linux/i2c.h> #include <linux/gpio.h> #include <linux/mfd/core.h> +#include <linux/regmap.h> #include <linux/mfd/tps65910.h> static struct mfd_cell tps65910s[] = { @@ -38,99 +40,56 @@ static struct mfd_cell tps65910s[] = { static int tps65910_i2c_read(struct tps65910 *tps65910, u8 reg, int bytes, void *dest) { - struct i2c_client *i2c = tps65910->i2c_client; - struct i2c_msg xfer[2]; - int ret; - - /* Write register */ - xfer[0].addr = i2c->addr; - xfer[0].flags = 0; - xfer[0].len = 1; - xfer[0].buf = ® - - /* Read data */ - xfer[1].addr = i2c->addr; - xfer[1].flags = I2C_M_RD; - xfer[1].len = bytes; - xfer[1].buf = dest; - - ret = i2c_transfer(i2c->adapter, xfer, 2); - if (ret == 2) - ret = 0; - else if (ret >= 0) - ret = -EIO; - - return ret; + return regmap_bulk_read(tps65910->regmap, reg, dest, bytes); } static int tps65910_i2c_write(struct tps65910 *tps65910, u8 reg, - int bytes, void *src) + int bytes, void *src) { - struct i2c_client *i2c = tps65910->i2c_client; - /* we add 1 byte for device register */ - u8 msg[TPS65910_MAX_REGISTER + 1]; - int ret; - - if (bytes > TPS65910_MAX_REGISTER) - return -EINVAL; - - msg[0] = reg; - memcpy(&msg[1], src, bytes); - - ret = i2c_master_send(i2c, msg, bytes + 1); - if (ret < 0) - return ret; - if (ret != bytes + 1) - return -EIO; - return 0; + return regmap_bulk_write(tps65910->regmap, reg, src, bytes); } int tps65910_set_bits(struct tps65910 *tps65910, u8 reg, u8 mask) { - u8 data; - int err; - - mutex_lock(&tps65910->io_mutex); - err = tps65910_i2c_read(tps65910, reg, 1, &data); - if (err) { - dev_err(tps65910->dev, "read from reg %x failed\n", reg); - goto out; - } - - data |= mask; - err = tps65910_i2c_write(tps65910, reg, 1, &data); - if (err) - dev_err(tps65910->dev, "write to reg %x failed\n", reg); - -out: - mutex_unlock(&tps65910->io_mutex); - return err; + return regmap_update_bits(tps65910->regmap, reg, mask, mask); } EXPORT_SYMBOL_GPL(tps65910_set_bits); int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask) { - u8 data; - int err; - - mutex_lock(&tps65910->io_mutex); - err = tps65910_i2c_read(tps65910, reg, 1, &data); - if (err) { - dev_err(tps65910->dev, "read from reg %x failed\n", reg); - goto out; - } - - data &= ~mask; - err = tps65910_i2c_write(tps65910, reg, 1, &data); - if (err) - dev_err(tps65910->dev, "write to reg %x failed\n", reg); - -out: - mutex_unlock(&tps65910->io_mutex); - return err; + return regmap_update_bits(tps65910->regmap, reg, mask, 0); } EXPORT_SYMBOL_GPL(tps65910_clear_bits); +static bool is_volatile_reg(struct device *dev, unsigned int reg) +{ + struct tps65910 *tps65910 = dev_get_drvdata(dev); + + /* + * Caching all regulator registers. + * All regualator register address range is same for + * TPS65910 and TPS65911 + */ + if ((reg >= TPS65910_VIO) && (reg <= TPS65910_VDAC)) { + /* Check for non-existing register */ + if (tps65910_chip_id(tps65910) == TPS65910) + if ((reg == TPS65911_VDDCTRL_OP) || + (reg == TPS65911_VDDCTRL_SR)) + return true; + return false; + } + return true; +} + +static const struct regmap_config tps65910_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = is_volatile_reg, + .max_register = TPS65910_MAX_REGISTER, + .num_reg_defaults_raw = TPS65910_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, +}; + static int tps65910_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -161,6 +120,13 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, tps65910->write = tps65910_i2c_write; mutex_init(&tps65910->io_mutex); + tps65910->regmap = regmap_init_i2c(i2c, &tps65910_regmap_config); + if (IS_ERR(tps65910->regmap)) { + ret = PTR_ERR(tps65910->regmap); + dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret); + goto regmap_err; + } + ret = mfd_add_devices(tps65910->dev, -1, tps65910s, ARRAY_SIZE(tps65910s), NULL, 0); @@ -178,6 +144,8 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, return ret; err: + regmap_exit(tps65910->regmap); +regmap_err: kfree(tps65910); kfree(init_data); return ret; @@ -189,6 +157,7 @@ static int tps65910_i2c_remove(struct i2c_client *i2c) tps65910_irq_exit(tps65910); mfd_remove_devices(tps65910->dev); + regmap_exit(tps65910->regmap); kfree(tps65910); return 0; diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 806680d1bbb..7c2267e71f8 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -46,9 +46,7 @@ #include <linux/i2c.h> #include <linux/i2c/twl.h> -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -#include <plat/cpu.h> -#endif +#include "twl-core.h" /* * The TWL4030 "Triton 2" is one of a family of a multi-function "Power @@ -116,8 +114,8 @@ #define twl_has_watchdog() false #endif -#if defined(CONFIG_MFD_TWL4030_AUDIO) || defined(CONFIG_MFD_TWL4030_AUDIO_MODULE) ||\ - defined(CONFIG_TWL6040_CORE) || defined(CONFIG_TWL6040_CORE_MODULE) +#if defined(CONFIG_MFD_TWL4030_AUDIO) || \ + defined(CONFIG_MFD_TWL4030_AUDIO_MODULE) #define twl_has_codec() true #else #define twl_has_codec() false @@ -147,12 +145,10 @@ #define SUB_CHIP_ID1 1 #define SUB_CHIP_ID2 2 #define SUB_CHIP_ID3 3 +#define SUB_CHIP_ID_INVAL 0xff #define TWL_MODULE_LAST TWL4030_MODULE_LAST -#define TWL4030_NR_IRQS 34 /* core:8, power:8, gpio: 18 */ -#define TWL6030_NR_IRQS 20 - /* Base Address defns for twl4030_map[] */ /* subchip/slave 0 - USB ID */ @@ -314,7 +310,7 @@ static struct twl_mapping twl6030_map[] = { * so they continue to match the order in this table. */ { SUB_CHIP_ID1, TWL6030_BASEADD_USB }, - { SUB_CHIP_ID3, TWL6030_BASEADD_AUDIO }, + { SUB_CHIP_ID_INVAL, TWL6030_BASEADD_AUDIO }, { SUB_CHIP_ID2, TWL6030_BASEADD_DIEID }, { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, { SUB_CHIP_ID1, TWL6030_BASEADD_PIH }, @@ -376,6 +372,11 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) return -EPERM; } sid = twl_map[mod_no].sid; + if (unlikely(sid == SUB_CHIP_ID_INVAL)) { + pr_err("%s: module %d is not part of the pmic\n", + DRIVER_NAME, mod_no); + return -EINVAL; + } twl = &twl_modules[sid]; mutex_lock(&twl->xfer_lock); @@ -433,6 +434,11 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) return -EPERM; } sid = twl_map[mod_no].sid; + if (unlikely(sid == SUB_CHIP_ID_INVAL)) { + pr_err("%s: module %d is not part of the pmic\n", + DRIVER_NAME, mod_no); + return -EINVAL; + } twl = &twl_modules[sid]; mutex_lock(&twl->xfer_lock); @@ -663,7 +669,8 @@ add_regulator(int num, struct regulator_init_data *pdata, */ static int -add_children(struct twl4030_platform_data *pdata, unsigned long features) +add_children(struct twl4030_platform_data *pdata, unsigned irq_base, + unsigned long features) { struct device *child; unsigned sub_chip_id; @@ -671,7 +678,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) if (twl_has_gpio() && pdata->gpio) { child = add_child(SUB_CHIP_ID1, "twl4030_gpio", pdata->gpio, sizeof(*pdata->gpio), - false, pdata->irq_base + GPIO_INTR_OFFSET, 0); + false, irq_base + GPIO_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -679,7 +686,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) if (twl_has_keypad() && pdata->keypad) { child = add_child(SUB_CHIP_ID2, "twl4030_keypad", pdata->keypad, sizeof(*pdata->keypad), - true, pdata->irq_base + KEYPAD_INTR_OFFSET, 0); + true, irq_base + KEYPAD_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -687,7 +694,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) if (twl_has_madc() && pdata->madc) { child = add_child(2, "twl4030_madc", pdata->madc, sizeof(*pdata->madc), - true, pdata->irq_base + MADC_INTR_OFFSET, 0); + true, irq_base + MADC_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -703,7 +710,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) sub_chip_id = twl_map[TWL_MODULE_RTC].sid; child = add_child(sub_chip_id, "twl_rtc", NULL, 0, - true, pdata->irq_base + RTC_INTR_OFFSET, 0); + true, irq_base + RTC_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -756,8 +763,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) pdata->usb, sizeof(*pdata->usb), true, /* irq0 = USB_PRES, irq1 = USB */ - pdata->irq_base + USB_PRES_INTR_OFFSET, - pdata->irq_base + USB_INTR_OFFSET); + irq_base + USB_PRES_INTR_OFFSET, + irq_base + USB_INTR_OFFSET); if (IS_ERR(child)) return PTR_ERR(child); @@ -805,8 +812,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) pdata->usb, sizeof(*pdata->usb), true, /* irq1 = VBUS_PRES, irq0 = USB ID */ - pdata->irq_base + USBOTG_INTR_OFFSET, - pdata->irq_base + USB_PRES_INTR_OFFSET); + irq_base + USBOTG_INTR_OFFSET, + irq_base + USB_PRES_INTR_OFFSET); if (IS_ERR(child)) return PTR_ERR(child); @@ -833,7 +840,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) if (twl_has_pwrbutton() && twl_class_is_4030()) { child = add_child(1, "twl4030_pwrbutton", - NULL, 0, true, pdata->irq_base + 8 + 0, 0); + NULL, 0, true, irq_base + 8 + 0, 0); if (IS_ERR(child)) return PTR_ERR(child); } @@ -847,15 +854,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) return PTR_ERR(child); } - if (twl_has_codec() && pdata->audio && twl_class_is_6030()) { - sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid; - child = add_child(sub_chip_id, "twl6040", - pdata->audio, sizeof(*pdata->audio), - false, 0, 0); - if (IS_ERR(child)) - return PTR_ERR(child); - } - /* twl4030 regulators */ if (twl_has_regulator() && twl_class_is_4030()) { child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1, @@ -1092,8 +1090,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) child = add_child(3, "twl4030_bci", pdata->bci, sizeof(*pdata->bci), false, /* irq0 = CHG_PRES, irq1 = BCI */ - pdata->irq_base + BCI_PRES_INTR_OFFSET, - pdata->irq_base + BCI_INTR_OFFSET); + irq_base + BCI_PRES_INTR_OFFSET, + irq_base + BCI_INTR_OFFSET); if (IS_ERR(child)) return PTR_ERR(child); } @@ -1193,26 +1191,24 @@ static void clocks_init(struct device *dev, /*----------------------------------------------------------------------*/ -int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); -int twl4030_exit_irq(void); -int twl4030_init_chip_irq(const char *chip); -int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); -int twl6030_exit_irq(void); static int twl_remove(struct i2c_client *client) { - unsigned i; + unsigned i, num_slaves; int status; - if (twl_class_is_4030()) + if (twl_class_is_4030()) { status = twl4030_exit_irq(); - else + num_slaves = TWL_NUM_SLAVES; + } else { status = twl6030_exit_irq(); + num_slaves = TWL_NUM_SLAVES - 1; + } if (status < 0) return status; - for (i = 0; i < TWL_NUM_SLAVES; i++) { + for (i = 0; i < num_slaves; i++) { struct twl_client *twl = &twl_modules[i]; if (twl->client && twl->client != client) @@ -1223,20 +1219,15 @@ static int twl_remove(struct i2c_client *client) return 0; } -/* NOTE: this driver only handles a single twl4030/tps659x0 chip */ +/* NOTE: This driver only handles a single twl4030/tps659x0 chip */ static int __devinit twl_probe(struct i2c_client *client, const struct i2c_device_id *id) { - int status; - unsigned i; struct twl4030_platform_data *pdata = client->dev.platform_data; struct device_node *node = client->dev.of_node; - u8 temp; - int ret = 0; - int nr_irqs = TWL4030_NR_IRQS; - - if ((id->driver_data) & TWL6030_CLASS) - nr_irqs = TWL6030_NR_IRQS; + int irq_base = 0; + int status; + unsigned i, num_slaves; if (node && !pdata) { /* @@ -1255,17 +1246,6 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) return -EINVAL; } - status = irq_alloc_descs(-1, pdata->irq_base, nr_irqs, 0); - if (IS_ERR_VALUE(status)) { - dev_err(&client->dev, "Fail to allocate IRQ descs\n"); - return status; - } - - pdata->irq_base = status; - pdata->irq_end = pdata->irq_base + nr_irqs; - irq_domain_add_legacy(node, nr_irqs, pdata->irq_base, 0, - &irq_domain_simple_ops, NULL); - if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { dev_dbg(&client->dev, "can't talk I2C?\n"); return -EIO; @@ -1276,13 +1256,23 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) return -EBUSY; } - for (i = 0; i < TWL_NUM_SLAVES; i++) { - struct twl_client *twl = &twl_modules[i]; + if ((id->driver_data) & TWL6030_CLASS) { + twl_id = TWL6030_CLASS_ID; + twl_map = &twl6030_map[0]; + num_slaves = TWL_NUM_SLAVES - 1; + } else { + twl_id = TWL4030_CLASS_ID; + twl_map = &twl4030_map[0]; + num_slaves = TWL_NUM_SLAVES; + } + + for (i = 0; i < num_slaves; i++) { + struct twl_client *twl = &twl_modules[i]; twl->address = client->addr + i; - if (i == 0) + if (i == 0) { twl->client = client; - else { + } else { twl->client = i2c_new_dummy(client->adapter, twl->address); if (!twl->client) { @@ -1294,22 +1284,16 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) } mutex_init(&twl->xfer_lock); } + inuse = true; - if ((id->driver_data) & TWL6030_CLASS) { - twl_id = TWL6030_CLASS_ID; - twl_map = &twl6030_map[0]; - } else { - twl_id = TWL4030_CLASS_ID; - twl_map = &twl4030_map[0]; - } /* setup clock framework */ clocks_init(&client->dev, pdata->clock); /* read TWL IDCODE Register */ if (twl_id == TWL4030_CLASS_ID) { - ret = twl_read_idcode_register(); - WARN(ret < 0, "Error: reading twl_idcode register value\n"); + status = twl_read_idcode_register(); + WARN(status < 0, "Error: reading twl_idcode register value\n"); } /* load power event scripts */ @@ -1317,31 +1301,31 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) twl4030_power_init(pdata->power); /* Maybe init the T2 Interrupt subsystem */ - if (client->irq - && pdata->irq_base - && pdata->irq_end > pdata->irq_base) { + if (client->irq) { if (twl_class_is_4030()) { twl4030_init_chip_irq(id->name); - status = twl4030_init_irq(client->irq, pdata->irq_base, - pdata->irq_end); + irq_base = twl4030_init_irq(&client->dev, client->irq); } else { - status = twl6030_init_irq(client->irq, pdata->irq_base, - pdata->irq_end); + irq_base = twl6030_init_irq(&client->dev, client->irq); } - if (status < 0) + if (irq_base < 0) { + status = irq_base; goto fail; + } } - /* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface. + /* + * Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface. * Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0, * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0. */ - if (twl_class_is_4030()) { + u8 temp; + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1); temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \ - I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU); + I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU); twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1); } @@ -1349,11 +1333,12 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) if (node) status = of_platform_populate(node, NULL, NULL, &client->dev); if (status) - status = add_children(pdata, id->driver_data); + status = add_children(pdata, irq_base, id->driver_data); fail: if (status < 0) twl_remove(client); + return status; } diff --git a/drivers/mfd/twl-core.h b/drivers/mfd/twl-core.h index 8c50a556e98..6ff99dce714 100644 --- a/drivers/mfd/twl-core.h +++ b/drivers/mfd/twl-core.h @@ -1,9 +1,9 @@ #ifndef __TWL_CORE_H__ #define __TWL_CORE_H__ -extern int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); +extern int twl6030_init_irq(struct device *dev, int irq_num); extern int twl6030_exit_irq(void); -extern int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); +extern int twl4030_init_irq(struct device *dev, int irq_num); extern int twl4030_exit_irq(void); extern int twl4030_init_chip_irq(const char *chip); diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index b69bb517b10..5d656e81435 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -28,10 +28,12 @@ */ #include <linux/init.h> +#include <linux/export.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/slab.h> - +#include <linux/of.h> +#include <linux/irqdomain.h> #include <linux/i2c/twl.h> #include "twl-core.h" @@ -53,13 +55,14 @@ * base + 8 .. base + 15 SIH for PWR_INT * base + 16 .. base + 33 SIH for GPIO */ +#define TWL4030_CORE_NR_IRQS 8 +#define TWL4030_PWR_NR_IRQS 8 /* PIH register offsets */ #define REG_PIH_ISR_P1 0x01 #define REG_PIH_ISR_P2 0x02 #define REG_PIH_SIR 0x03 /* for testing */ - /* Linux could (eventually) use either IRQ line */ static int irq_line; @@ -111,7 +114,8 @@ static int nr_sih_modules; #define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT -/* Order in this table matches order in PIH_ISR. That is, +/* + * Order in this table matches order in PIH_ISR. That is, * BIT(n) in PIH_ISR is sih_modules[n]. */ /* sih_modules_twl4030 is used both in twl4030 and twl5030 */ @@ -288,7 +292,6 @@ static unsigned twl4030_irq_base; */ static irqreturn_t handle_twl4030_pih(int irq, void *devid) { - int module_irq; irqreturn_t ret; u8 pih_isr; @@ -299,16 +302,18 @@ static irqreturn_t handle_twl4030_pih(int irq, void *devid) return IRQ_NONE; } - /* these handlers deal with the relevant SIH irq status */ - for (module_irq = twl4030_irq_base; - pih_isr; - pih_isr >>= 1, module_irq++) { - if (pih_isr & 0x1) - handle_nested_irq(module_irq); + while (pih_isr) { + unsigned long pending = __ffs(pih_isr); + unsigned int irq; + + pih_isr &= ~BIT(pending); + irq = pending + twl4030_irq_base; + handle_nested_irq(irq); } return IRQ_HANDLED; } + /*----------------------------------------------------------------------*/ /* @@ -337,7 +342,6 @@ static int twl4030_init_sih_modules(unsigned line) memset(buf, 0xff, sizeof buf); sih = sih_modules; for (i = 0; i < nr_sih_modules; i++, sih++) { - /* skip USB -- it's funky */ if (!sih->bytes_ixr) continue; @@ -352,7 +356,8 @@ static int twl4030_init_sih_modules(unsigned line) pr_err("twl4030: err %d initializing %s %s\n", status, sih->name, "IMR"); - /* Maybe disable "exclusive" mode; buffer second pending irq; + /* + * Maybe disable "exclusive" mode; buffer second pending irq; * set Clear-On-Read (COR) bit. * * NOTE that sometimes COR polarity is documented as being @@ -382,7 +387,8 @@ static int twl4030_init_sih_modules(unsigned line) if (sih->irq_lines <= line) continue; - /* Clear pending interrupt status. Either the read was + /* + * Clear pending interrupt status. Either the read was * enough, or we need to write those bits. Repeat, in * case an IRQ is pending (PENDDIS=0) ... that's not * uncommon with PWR_INT.PWRON. @@ -398,7 +404,8 @@ static int twl4030_init_sih_modules(unsigned line) status = twl_i2c_write(sih->module, buf, sih->mask[line].isr_offset, sih->bytes_ixr); - /* else COR=1 means read sufficed. + /* + * else COR=1 means read sufficed. * (for most SIH modules...) */ } @@ -410,7 +417,8 @@ static int twl4030_init_sih_modules(unsigned line) static inline void activate_irq(int irq) { #ifdef CONFIG_ARM - /* ARM requires an extra step to clear IRQ_NOREQUEST, which it + /* + * ARM requires an extra step to clear IRQ_NOREQUEST, which it * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. */ set_irq_flags(irq, IRQF_VALID); @@ -620,33 +628,24 @@ static irqreturn_t handle_twl4030_sih(int irq, void *data) return IRQ_HANDLED; } -static unsigned twl4030_irq_next; - -/* returns the first IRQ used by this SIH bank, - * or negative errno - */ -int twl4030_sih_setup(int module) +/* returns the first IRQ used by this SIH bank, or negative errno */ +int twl4030_sih_setup(struct device *dev, int module, int irq_base) { int sih_mod; const struct sih *sih = NULL; struct sih_agent *agent; int i, irq; int status = -EINVAL; - unsigned irq_base = twl4030_irq_next; /* only support modules with standard clear-on-read for now */ - for (sih_mod = 0, sih = sih_modules; - sih_mod < nr_sih_modules; + for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules; sih_mod++, sih++) { if (sih->module == module && sih->set_cor) { - if (!WARN((irq_base + sih->bits) > NR_IRQS, - "irq %d for %s too big\n", - irq_base + sih->bits, - sih->name)) - status = 0; + status = 0; break; } } + if (status < 0) return status; @@ -654,8 +653,6 @@ int twl4030_sih_setup(int module) if (!agent) return -ENOMEM; - status = 0; - agent->irq_base = irq_base; agent->sih = sih; agent->imr = ~0; @@ -671,8 +668,6 @@ int twl4030_sih_setup(int module) activate_irq(irq); } - twl4030_irq_next += i; - /* replace generic PIH handler (handle_simple_irq) */ irq = sih_mod + twl4030_irq_base; irq_set_handler_data(irq, agent); @@ -680,26 +675,43 @@ int twl4030_sih_setup(int module) status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0, agent->irq_name ?: sih->name, NULL); - pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name, - irq, irq_base, twl4030_irq_next - 1); + dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name, + irq, irq_base, irq_base + i - 1); return status < 0 ? status : irq_base; } /* FIXME need a call to reverse twl4030_sih_setup() ... */ - /*----------------------------------------------------------------------*/ /* FIXME pass in which interrupt line we'll use ... */ #define twl_irq_line 0 -int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) +int twl4030_init_irq(struct device *dev, int irq_num) { static struct irq_chip twl4030_irq_chip; + int status, i; + int irq_base, irq_end, nr_irqs; + struct device_node *node = dev->of_node; - int status; - int i; + /* + * TWL core and pwr interrupts must be contiguous because + * the hwirqs numbers are defined contiguously from 1 to 15. + * Create only one domain for both. + */ + nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS; + + irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); + if (IS_ERR_VALUE(irq_base)) { + dev_err(dev, "Fail to allocate IRQ descs\n"); + return irq_base; + } + + irq_domain_add_legacy(node, nr_irqs, irq_base, 0, + &irq_domain_simple_ops, NULL); + + irq_end = irq_base + TWL4030_CORE_NR_IRQS; /* * Mask and clear all TWL4030 interrupts since initially we do @@ -711,7 +723,8 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) twl4030_irq_base = irq_base; - /* install an irq handler for each of the SIH modules; + /* + * Install an irq handler for each of the SIH modules; * clone dummy irq_chip since PIH can't *do* anything */ twl4030_irq_chip = dummy_irq_chip; @@ -725,14 +738,14 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) irq_set_nested_thread(i, 1); activate_irq(i); } - twl4030_irq_next = i; - pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH", - irq_num, irq_base, twl4030_irq_next - 1); + + dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", "PIH", + irq_num, irq_base, irq_end); /* ... and the PWR_INT module ... */ - status = twl4030_sih_setup(TWL4030_MODULE_INT); + status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end); if (status < 0) { - pr_err("twl4030: sih_setup PWR INT --> %d\n", status); + dev_err(dev, "sih_setup PWR INT --> %d\n", status); goto fail; } @@ -741,11 +754,11 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) IRQF_ONESHOT, "TWL4030-PIH", NULL); if (status < 0) { - pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status); + dev_err(dev, "could not claim irq%d: %d\n", irq_num, status); goto fail_rqirq; } - return status; + return irq_base; fail_rqirq: /* clean up twl4030_sih_setup */ fail: diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c index c6b456ad734..b76902f1e44 100644 --- a/drivers/mfd/twl6030-irq.c +++ b/drivers/mfd/twl6030-irq.c @@ -39,6 +39,8 @@ #include <linux/i2c/twl.h> #include <linux/platform_device.h> #include <linux/suspend.h> +#include <linux/of.h> +#include <linux/irqdomain.h> #include "twl-core.h" @@ -51,8 +53,8 @@ * * We set up IRQs starting at a platform-specified base. An interrupt map table, * specifies mapping between interrupt number and the associated module. - * */ +#define TWL6030_NR_IRQS 20 static int twl6030_interrupt_mapping[24] = { PWR_INTR_OFFSET, /* Bit 0 PWRON */ @@ -185,8 +187,17 @@ static int twl6030_irq_thread(void *data) } local_irq_enable(); } - ret = twl_i2c_write(TWL_MODULE_PIH, sts.bytes, - REG_INT_STS_A, 3); /* clear INT_STS_A */ + + /* + * NOTE: + * Simulation confirms that documentation is wrong w.r.t the + * interrupt status clear operation. A single *byte* write to + * any one of STS_A to STS_C register results in all three + * STS registers being reset. Since it does not matter which + * value is written, all three registers are cleared on a + * single byte write, so we just use 0x0 to clear. + */ + ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A); if (ret) pr_warning("twl6030: I2C error in clearing PIH ISR\n"); @@ -227,7 +238,7 @@ static inline void activate_irq(int irq) #endif } -int twl6030_irq_set_wake(struct irq_data *d, unsigned int on) +static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on) { if (on) atomic_inc(&twl6030_wakeirqs); @@ -237,11 +248,6 @@ int twl6030_irq_set_wake(struct irq_data *d, unsigned int on) return 0; } -/*----------------------------------------------------------------------*/ - -static unsigned twl6030_irq_next; - -/*----------------------------------------------------------------------*/ int twl6030_interrupt_unmask(u8 bit_mask, u8 offset) { int ret; @@ -311,7 +317,8 @@ int twl6030_mmc_card_detect_config(void) ret); return ret; } - return 0; + + return twl6030_irq_base + MMCDETECT_INTR_OFFSET; } EXPORT_SYMBOL(twl6030_mmc_card_detect_config); @@ -340,29 +347,44 @@ int twl6030_mmc_card_detect(struct device *dev, int slot) } EXPORT_SYMBOL(twl6030_mmc_card_detect); -int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) +int twl6030_init_irq(struct device *dev, int irq_num) { - - int status = 0; - int i; + struct device_node *node = dev->of_node; + int nr_irqs, irq_base, irq_end; struct task_struct *task; - int ret; - u8 mask[4]; + static struct irq_chip twl6030_irq_chip; + int status = 0; + int i; + u8 mask[4]; + + nr_irqs = TWL6030_NR_IRQS; + + irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); + if (IS_ERR_VALUE(irq_base)) { + dev_err(dev, "Fail to allocate IRQ descs\n"); + return irq_base; + } + + irq_domain_add_legacy(node, nr_irqs, irq_base, 0, + &irq_domain_simple_ops, NULL); + + irq_end = irq_base + nr_irqs; - static struct irq_chip twl6030_irq_chip; mask[1] = 0xFF; mask[2] = 0xFF; mask[3] = 0xFF; - ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], - REG_INT_MSK_LINE_A, 3); /* MASK ALL INT LINES */ - ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], - REG_INT_MSK_STS_A, 3); /* MASK ALL INT STS */ - ret = twl_i2c_write(TWL_MODULE_PIH, &mask[0], - REG_INT_STS_A, 3); /* clear INT_STS_A,B,C */ + + /* mask all int lines */ + twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3); + /* mask all int sts */ + twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3); + /* clear INT_STS_A,B,C */ + twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3); twl6030_irq_base = irq_base; - /* install an irq handler for each of the modules; + /* + * install an irq handler for each of the modules; * clone dummy irq_chip since PIH can't *do* anything */ twl6030_irq_chip = dummy_irq_chip; @@ -377,30 +399,29 @@ int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) activate_irq(i); } - twl6030_irq_next = i; - pr_info("twl6030: %s (irq %d) chaining IRQs %d..%d\n", "PIH", - irq_num, irq_base, twl6030_irq_next - 1); + dev_info(dev, "PIH (irq %d) chaining IRQs %d..%d\n", + irq_num, irq_base, irq_end); /* install an irq handler to demultiplex the TWL6030 interrupt */ init_completion(&irq_event); - status = request_irq(irq_num, handle_twl6030_pih, 0, - "TWL6030-PIH", &irq_event); + status = request_irq(irq_num, handle_twl6030_pih, 0, "TWL6030-PIH", + &irq_event); if (status < 0) { - pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status); + dev_err(dev, "could not claim irq %d: %d\n", irq_num, status); goto fail_irq; } task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq"); if (IS_ERR(task)) { - pr_err("twl6030: could not create irq %d thread!\n", irq_num); + dev_err(dev, "could not create irq %d thread!\n", irq_num); status = PTR_ERR(task); goto fail_kthread; } twl_irq = irq_num; register_pm_notifier(&twl6030_irq_pm_notifier_block); - return status; + return irq_base; fail_kthread: free_irq(irq_num, &irq_event); @@ -408,6 +429,7 @@ fail_kthread: fail_irq: for (i = irq_base; i < irq_end; i++) irq_set_chip_and_handler(i, NULL, NULL); + return status; } diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c index 745c8794566..4bceee98f0a 100644 --- a/drivers/mfd/wm831x-spi.c +++ b/drivers/mfd/wm831x-spi.c @@ -89,7 +89,7 @@ static const struct spi_device_id wm831x_spi_ids[] = { { "wm8326", WM8326 }, { }, }; -MODULE_DEVICE_TABLE(spi, wm831x_spi_id); +MODULE_DEVICE_TABLE(spi, wm831x_spi_ids); static struct spi_driver wm831x_spi_driver = { .driver = { diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c index 237764ae5f9..1189a17f0f2 100644 --- a/drivers/mfd/wm8400-core.c +++ b/drivers/mfd/wm8400-core.c @@ -271,8 +271,7 @@ static int wm8400_init(struct wm8400 *wm8400, return -EIO; } if (i != reg_data[WM8400_RESET_ID].default_val) { - dev_err(wm8400->dev, "Device is not a WM8400, ID is %x\n", - reg); + dev_err(wm8400->dev, "Device is not a WM8400, ID is %x\n", i); return -ENODEV; } diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 98733d408fe..9d7ca1e978f 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -639,7 +639,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq) } pm_runtime_enable(wm8994->dev); - pm_runtime_resume(wm8994->dev); + pm_runtime_idle(wm8994->dev); return 0; diff --git a/drivers/mfd/wm8994-regmap.c b/drivers/mfd/wm8994-regmap.c index 7605b609545..bfd25af6ecb 100644 --- a/drivers/mfd/wm8994-regmap.c +++ b/drivers/mfd/wm8994-regmap.c @@ -20,7 +20,6 @@ #include "wm8994.h" static struct reg_default wm1811_defaults[] = { - { 0x0000, 0x1811 }, /* R0 - Software Reset */ { 0x0001, 0x0000 }, /* R1 - Power Management (1) */ { 0x0002, 0x6000 }, /* R2 - Power Management (2) */ { 0x0003, 0x0000 }, /* R3 - Power Management (3) */ @@ -61,7 +60,7 @@ static struct reg_default wm1811_defaults[] = { { 0x0036, 0x0000 }, /* R54 - Speaker Mixer */ { 0x0037, 0x0000 }, /* R55 - Additional Control */ { 0x0038, 0x0000 }, /* R56 - AntiPOP (1) */ - { 0x0039, 0x0180 }, /* R57 - AntiPOP (2) */ + { 0x0039, 0x0000 }, /* R57 - AntiPOP (2) */ { 0x003B, 0x000D }, /* R59 - LDO 1 */ { 0x003C, 0x0003 }, /* R60 - LDO 2 */ { 0x003D, 0x0039 }, /* R61 - MICBIAS1 */ @@ -69,16 +68,12 @@ static struct reg_default wm1811_defaults[] = { { 0x004C, 0x1F25 }, /* R76 - Charge Pump (1) */ { 0x004D, 0xAB19 }, /* R77 - Charge Pump (2) */ { 0x0051, 0x0004 }, /* R81 - Class W (1) */ - { 0x0054, 0x0000 }, /* R84 - DC Servo (1) */ { 0x0055, 0x054A }, /* R85 - DC Servo (2) */ - { 0x0058, 0x0000 }, /* R88 - DC Servo Readback */ { 0x0059, 0x0000 }, /* R89 - DC Servo (4) */ { 0x0060, 0x0000 }, /* R96 - Analogue HP (1) */ { 0x00C5, 0x0000 }, /* R197 - Class D Test (5) */ { 0x00D0, 0x7600 }, /* R208 - Mic Detect 1 */ { 0x00D1, 0x007F }, /* R209 - Mic Detect 2 */ - { 0x00D2, 0x0000 }, /* R210 - Mic Detect 3 */ - { 0x0100, 0x0100 }, /* R256 - Chip Revision */ { 0x0101, 0x8004 }, /* R257 - Control Interface */ { 0x0200, 0x0000 }, /* R512 - AIF1 Clocking (1) */ { 0x0201, 0x0000 }, /* R513 - AIF1 Clocking (2) */ @@ -88,7 +83,6 @@ static struct reg_default wm1811_defaults[] = { { 0x0209, 0x0000 }, /* R521 - Clocking (2) */ { 0x0210, 0x0083 }, /* R528 - AIF1 Rate */ { 0x0211, 0x0083 }, /* R529 - AIF2 Rate */ - { 0x0212, 0x0000 }, /* R530 - Rate Status */ { 0x0220, 0x0000 }, /* R544 - FLL1 Control (1) */ { 0x0221, 0x0000 }, /* R545 - FLL1 Control (2) */ { 0x0222, 0x0000 }, /* R546 - FLL1 Control (3) */ @@ -218,8 +212,6 @@ static struct reg_default wm1811_defaults[] = { { 0x070A, 0xA101 }, /* R1802 - GPIO 11 */ { 0x0720, 0x0000 }, /* R1824 - Pull Control (1) */ { 0x0721, 0x0156 }, /* R1825 - Pull Control (2) */ - { 0x0730, 0x0000 }, /* R1840 - Interrupt Status 1 */ - { 0x0731, 0x0000 }, /* R1841 - Interrupt Status 2 */ { 0x0732, 0x0000 }, /* R1842 - Interrupt Raw Status 2 */ { 0x0738, 0x07FF }, /* R1848 - Interrupt Status 1 Mask */ { 0x0739, 0xDFEF }, /* R1849 - Interrupt Status 2 Mask */ @@ -228,7 +220,6 @@ static struct reg_default wm1811_defaults[] = { }; static struct reg_default wm8994_defaults[] = { - { 0x0000, 0x8994 }, /* R0 - Software Reset */ { 0x0001, 0x0000 }, /* R1 - Power Management (1) */ { 0x0002, 0x6000 }, /* R2 - Power Management (2) */ { 0x0003, 0x0000 }, /* R3 - Power Management (3) */ @@ -275,12 +266,9 @@ static struct reg_default wm8994_defaults[] = { { 0x003C, 0x0003 }, /* R60 - LDO 2 */ { 0x004C, 0x1F25 }, /* R76 - Charge Pump (1) */ { 0x0051, 0x0004 }, /* R81 - Class W (1) */ - { 0x0054, 0x0000 }, /* R84 - DC Servo (1) */ { 0x0055, 0x054A }, /* R85 - DC Servo (2) */ { 0x0057, 0x0000 }, /* R87 - DC Servo (4) */ - { 0x0058, 0x0000 }, /* R88 - DC Servo Readback */ { 0x0060, 0x0000 }, /* R96 - Analogue HP (1) */ - { 0x0100, 0x0003 }, /* R256 - Chip Revision */ { 0x0101, 0x8004 }, /* R257 - Control Interface */ { 0x0110, 0x0000 }, /* R272 - Write Sequencer Ctrl (1) */ { 0x0111, 0x0000 }, /* R273 - Write Sequencer Ctrl (2) */ @@ -292,7 +280,6 @@ static struct reg_default wm8994_defaults[] = { { 0x0209, 0x0000 }, /* R521 - Clocking (2) */ { 0x0210, 0x0083 }, /* R528 - AIF1 Rate */ { 0x0211, 0x0083 }, /* R529 - AIF2 Rate */ - { 0x0212, 0x0000 }, /* R530 - Rate Status */ { 0x0220, 0x0000 }, /* R544 - FLL1 Control (1) */ { 0x0221, 0x0000 }, /* R545 - FLL1 Control (2) */ { 0x0222, 0x0000 }, /* R546 - FLL1 Control (3) */ @@ -445,9 +432,6 @@ static struct reg_default wm8994_defaults[] = { { 0x070A, 0xA101 }, /* R1802 - GPIO 11 */ { 0x0720, 0x0000 }, /* R1824 - Pull Control (1) */ { 0x0721, 0x0156 }, /* R1825 - Pull Control (2) */ - { 0x0730, 0x0000 }, /* R1840 - Interrupt Status 1 */ - { 0x0731, 0x0000 }, /* R1841 - Interrupt Status 2 */ - { 0x0732, 0x0000 }, /* R1842 - Interrupt Raw Status 2 */ { 0x0738, 0x07FF }, /* R1848 - Interrupt Status 1 Mask */ { 0x0739, 0xFFFF }, /* R1849 - Interrupt Status 2 Mask */ { 0x0740, 0x0000 }, /* R1856 - Interrupt Control */ @@ -455,7 +439,6 @@ static struct reg_default wm8994_defaults[] = { }; static struct reg_default wm8958_defaults[] = { - { 0x0000, 0x8958 }, /* R0 - Software Reset */ { 0x0001, 0x0000 }, /* R1 - Power Management (1) */ { 0x0002, 0x6000 }, /* R2 - Power Management (2) */ { 0x0003, 0x0000 }, /* R3 - Power Management (3) */ @@ -970,6 +953,7 @@ static bool wm8994_readable_register(struct device *dev, unsigned int reg) { switch (reg) { case WM8994_DC_SERVO_READBACK: + case WM8994_MICBIAS: case WM8994_WRITE_SEQUENCER_CTRL_1: case WM8994_WRITE_SEQUENCER_CTRL_2: case WM8994_AIF1_ADC2_LEFT_VOLUME: diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c index f04761e6622..afee0e8ae71 100644 --- a/drivers/rtc/rtc-88pm860x.c +++ b/drivers/rtc/rtc-88pm860x.c @@ -376,6 +376,9 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&info->calib_work, calibrate_vrtc_work); schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL); #endif /* VRTC_CALIBRATION */ + + device_init_wakeup(&pdev->dev, 1); + return 0; out_rtc: free_irq(info->irq, info); @@ -401,10 +404,34 @@ static int __devexit pm860x_rtc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int pm860x_rtc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag |= 1 << PM8607_IRQ_RTC; + return 0; +} +static int pm860x_rtc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag &= ~(1 << PM8607_IRQ_RTC); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_rtc_pm_ops, pm860x_rtc_suspend, pm860x_rtc_resume); + static struct platform_driver pm860x_rtc_driver = { .driver = { .name = "88pm860x-rtc", .owner = THIS_MODULE, + .pm = &pm860x_rtc_pm_ops, }, .probe = pm860x_rtc_probe, .remove = __devexit_p(pm860x_rtc_remove), diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c index 915943af3f2..f49181c7311 100644 --- a/drivers/video/backlight/88pm860x_bl.c +++ b/drivers/video/backlight/88pm860x_bl.c @@ -67,6 +67,28 @@ static inline int wled_idc(int port) return ret; } +static int backlight_power_set(struct pm860x_chip *chip, int port, + int on) +{ + int ret = -EINVAL; + + switch (port) { + case PM8606_BACKLIGHT1: + ret = on ? pm8606_osc_enable(chip, WLED1_DUTY) : + pm8606_osc_disable(chip, WLED1_DUTY); + break; + case PM8606_BACKLIGHT2: + ret = on ? pm8606_osc_enable(chip, WLED2_DUTY) : + pm8606_osc_disable(chip, WLED2_DUTY); + break; + case PM8606_BACKLIGHT3: + ret = on ? pm8606_osc_enable(chip, WLED3_DUTY) : + pm8606_osc_disable(chip, WLED3_DUTY); + break; + } + return ret; +} + static int pm860x_backlight_set(struct backlight_device *bl, int brightness) { struct pm860x_backlight_data *data = bl_get_data(bl); @@ -79,6 +101,9 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness) else value = brightness; + if (brightness) + backlight_power_set(chip, data->port, 1); + ret = pm860x_reg_write(data->i2c, wled_a(data->port), value); if (ret < 0) goto out; @@ -115,6 +140,9 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness) if (ret < 0) goto out; + if (brightness == 0) + backlight_power_set(chip, data->port, 0); + dev_dbg(chip->dev, "set brightness %d\n", value); data->current_brightness = value; return 0; @@ -170,7 +198,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev) struct backlight_device *bl; struct resource *res; struct backlight_properties props; - unsigned char value; char name[MFD_NAME_SIZE]; int ret; @@ -217,26 +244,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev) platform_set_drvdata(pdev, bl); - /* Enable reference VSYS */ - ret = pm860x_reg_read(data->i2c, PM8606_VSYS); - if (ret < 0) - goto out; - if ((ret & PM8606_VSYS_EN) == 0) { - value = ret | PM8606_VSYS_EN; - ret = pm860x_reg_write(data->i2c, PM8606_VSYS, value); - if (ret < 0) - goto out; - } - /* Enable reference OSC */ - ret = pm860x_reg_read(data->i2c, PM8606_MISC); - if (ret < 0) - goto out; - if ((ret & PM8606_MISC_OSC_EN) == 0) { - value = ret | PM8606_MISC_OSC_EN; - ret = pm860x_reg_write(data->i2c, PM8606_MISC, value); - if (ret < 0) - goto out; - } /* read current backlight */ ret = pm860x_backlight_get_brightness(bl); if (ret < 0) |