diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/scsi/dpt_i2o.c | 132 | ||||
| -rw-r--r-- | drivers/scsi/dpti.h | 9 |
2 files changed, 68 insertions, 73 deletions
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 502732ac270..6b2197b0e96 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -173,20 +173,20 @@ static struct pci_device_id dptids[] = { }; MODULE_DEVICE_TABLE(pci,dptids); -static void adpt_exit(void); - -static int adpt_detect(void) +static int adpt_detect(struct scsi_host_template* sht) { struct pci_dev *pDev = NULL; adpt_hba* pHba; + adpt_init(); + PINFO("Detecting Adaptec I2O RAID controllers...\n"); /* search for all Adatpec I2O RAID cards */ while ((pDev = pci_get_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) { if(pDev->device == PCI_DPT_DEVICE_ID || pDev->device == PCI_DPT_RAPTOR_DEVICE_ID){ - if(adpt_install_hba(pDev) ){ + if(adpt_install_hba(sht, pDev) ){ PERROR("Could not Init an I2O RAID device\n"); PERROR("Will not try to detect others.\n"); return hba_count-1; @@ -248,33 +248,34 @@ rebuild_sys_tab: } for (pHba = hba_chain; pHba; pHba = pHba->next) { - if (adpt_scsi_register(pHba) < 0) { + if( adpt_scsi_register(pHba,sht) < 0){ adpt_i2o_delete_hba(pHba); continue; } pHba->initialized = TRUE; pHba->state &= ~DPTI_STATE_RESET; - scsi_scan_host(pHba->host); } // Register our control device node // nodes will need to be created in /dev to access this // the nodes can not be created from within the driver if (hba_count && register_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER, &adpt_fops)) { - adpt_exit(); + adpt_i2o_sys_shutdown(); return 0; } return hba_count; } -static int adpt_release(adpt_hba *pHba) +/* + * scsi_unregister will be called AFTER we return. + */ +static int adpt_release(struct Scsi_Host *host) { - struct Scsi_Host *shost = pHba->host; - scsi_remove_host(shost); + adpt_hba* pHba = (adpt_hba*) host->hostdata[0]; // adpt_i2o_quiesce_hba(pHba); adpt_i2o_delete_hba(pHba); - scsi_host_put(shost); + scsi_unregister(host); return 0; } @@ -881,7 +882,7 @@ static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p) #endif -static int adpt_install_hba(struct pci_dev* pDev) +static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev) { adpt_hba* pHba = NULL; @@ -1030,6 +1031,8 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) mutex_lock(&adpt_configuration_lock); + // scsi_unregister calls our adpt_release which + // does a quiese if(pHba->host){ free_irq(pHba->host->irq, pHba); } @@ -1081,6 +1084,17 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) } +static int adpt_init(void) +{ + printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n"); +#ifdef REBOOT_NOTIFIER + register_reboot_notifier(&adpt_reboot_notifier); +#endif + + return 0; +} + + static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun) { struct adpt_device* d; @@ -2166,6 +2180,37 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d } +static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht) +{ + struct Scsi_Host *host = NULL; + + host = scsi_register(sht, sizeof(adpt_hba*)); + if (host == NULL) { + printk ("%s: scsi_register returned NULL\n",pHba->name); + return -1; + } + host->hostdata[0] = (unsigned long)pHba; + pHba->host = host; + + host->irq = pHba->pDev->irq; + /* no IO ports, so don't have to set host->io_port and + * host->n_io_port + */ + host->io_port = 0; + host->n_io_port = 0; + /* see comments in scsi_host.h */ + host->max_id = 16; + host->max_lun = 256; + host->max_channel = pHba->top_scsi_channel + 1; + host->cmd_per_lun = 1; + host->unique_id = (uint) pHba; + host->sg_tablesize = pHba->sg_tablesize; + host->can_queue = pHba->post_fifo_size; + + return 0; +} + + static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) { adpt_hba* pHba; @@ -3284,10 +3329,12 @@ static static void adpt_delay(int millisec) #endif -static struct scsi_host_template adpt_template = { +static struct scsi_host_template driver_template = { .name = "dpt_i2o", .proc_name = "dpt_i2o", .proc_info = adpt_proc_info, + .detect = adpt_detect, + .release = adpt_release, .info = adpt_info, .queuecommand = adpt_queue, .eh_abort_handler = adpt_abort, @@ -3301,62 +3348,5 @@ static struct scsi_host_template adpt_template = { .cmd_per_lun = 1, .use_clustering = ENABLE_CLUSTERING, }; - -static s32 adpt_scsi_register(adpt_hba* pHba) -{ - struct Scsi_Host *host; - - host = scsi_host_alloc(&adpt_template, sizeof(adpt_hba*)); - if (host == NULL) { - printk ("%s: scsi_host_alloc returned NULL\n",pHba->name); - return -1; - } - host->hostdata[0] = (unsigned long)pHba; - pHba->host = host; - - host->irq = pHba->pDev->irq; - /* no IO ports, so don't have to set host->io_port and - * host->n_io_port - */ - host->io_port = 0; - host->n_io_port = 0; - /* see comments in scsi_host.h */ - host->max_id = 16; - host->max_lun = 256; - host->max_channel = pHba->top_scsi_channel + 1; - host->cmd_per_lun = 1; - host->unique_id = (uint) pHba; - host->sg_tablesize = pHba->sg_tablesize; - host->can_queue = pHba->post_fifo_size; - - if (scsi_add_host(host, &pHba->pDev->dev)) { - scsi_host_put(host); - return -1; - } - - return 0; -} - -static int __init adpt_init(void) -{ - int count; - - printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n"); -#ifdef REBOOT_NOTIFIER - register_reboot_notifier(&adpt_reboot_notifier); -#endif - - count = adpt_detect(); - - return count > 0 ? 0 : -ENODEV; -} - -static void __exit adpt_exit(void) -{ - while (hba_chain) - adpt_release(hba_chain); -} - -module_init(adpt_init); -module_exit(adpt_exit); +#include "scsi_module.c" MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h index 0892f6c7031..fd79068c586 100644 --- a/drivers/scsi/dpti.h +++ b/drivers/scsi/dpti.h @@ -28,9 +28,11 @@ * SCSI interface function Prototypes */ +static int adpt_detect(struct scsi_host_template * sht); static int adpt_queue(struct scsi_cmnd * cmd, void (*cmdcomplete) (struct scsi_cmnd *)); static int adpt_abort(struct scsi_cmnd * cmd); static int adpt_reset(struct scsi_cmnd* cmd); +static int adpt_release(struct Scsi_Host *host); static int adpt_slave_configure(struct scsi_device *); static const char *adpt_info(struct Scsi_Host *pSHost); @@ -47,6 +49,8 @@ static int adpt_device_reset(struct scsi_cmnd* cmd); #define DPT_DRIVER_NAME "Adaptec I2O RAID" +#ifndef HOSTS_C + #include "dpt/sys_info.h" #include <linux/wait.h> #include "dpt/dpti_i2o.h" @@ -285,7 +289,7 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba); static s32 adpt_i2o_hrt_get(adpt_hba* pHba); static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice); static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd); -static s32 adpt_scsi_register(adpt_hba* pHba); +static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht); static s32 adpt_hba_reset(adpt_hba* pHba); static s32 adpt_i2o_reset_hba(adpt_hba* pHba); static s32 adpt_rescan(adpt_hba* pHba); @@ -295,7 +299,7 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba); static void adpt_inquiry(adpt_hba* pHba); static void adpt_fail_posted_scbs(adpt_hba* pHba); static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun); -static int adpt_install_hba(struct pci_dev* pDev) ; +static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev) ; static int adpt_i2o_online_hba(adpt_hba* pHba); static void adpt_i2o_post_wait_complete(u32, int); static int adpt_i2o_systab_send(adpt_hba* pHba); @@ -339,4 +343,5 @@ static void adpt_i386_info(sysInfo_S* si); #define FW_DEBUG_BLED_OFFSET 8 #define FW_DEBUG_FLAGS_NO_HEADERS_B 0x01 +#endif /* !HOSTS_C */ #endif /* _DPT_H */ |