diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/video/s1d13xxxfb.c | 341 |
1 files changed, 308 insertions, 33 deletions
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c index 0726aecf3b7..0deb0a8867b 100644 --- a/drivers/video/s1d13xxxfb.c +++ b/drivers/video/s1d13xxxfb.c @@ -2,6 +2,7 @@ * * (c) 2004 Simtec Electronics * (c) 2005 Thibaut VARENE <varenet@parisc-linux.org> + * (c) 2009 Kristoffer Ericson <kristoffer.ericson@gmail.com> * * Driver for Epson S1D13xxx series framebuffer chips * @@ -10,18 +11,10 @@ * linux/drivers/video/epson1355fb.c * linux/drivers/video/epson/s1d13xxxfb.c (2.4 driver by Epson) * - * Note, currently only tested on S1D13806 with 16bit CRT. - * As such, this driver might still contain some hardcoded bits relating to - * S1D13806. - * Making it work on other S1D13XXX chips should merely be a matter of adding - * a few switch()s, some missing glue here and there maybe, and split header - * files. - * * TODO: - handle dual screen display (CRT and LCD at the same time). * - check_var(), mode change, etc. - * - PM untested. - * - Accelerated interfaces. - * - Probably not SMP safe :) + * - probably not SMP safe :) + * - support all bitblt operations on all cards * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for @@ -31,19 +24,24 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/delay.h> - #include <linux/types.h> #include <linux/errno.h> #include <linux/mm.h> #include <linux/mman.h> #include <linux/fb.h> +#include <linux/spinlock_types.h> +#include <linux/spinlock.h> #include <asm/io.h> #include <video/s1d13xxxfb.h> -#define PFX "s1d13xxxfb: " +#define PFX "s1d13xxxfb: " +#define BLIT "s1d13xxxfb_bitblt: " +/* + * set this to enable debugging on general functions + */ #if 0 #define dbg(fmt, args...) do { printk(KERN_INFO fmt, ## args); } while(0) #else @@ -51,7 +49,21 @@ #endif /* - * List of card production ids + * set this to enable debugging on 2D acceleration + */ +#if 0 +#define dbg_blit(fmt, args...) do { printk(KERN_INFO BLIT fmt, ## args); } while (0) +#else +#define dbg_blit(fmt, args...) do { } while (0) +#endif + +/* + * we make sure only one bitblt operation is running + */ +static DEFINE_SPINLOCK(s1d13xxxfb_bitblt_lock); + +/* + * list of card production ids */ static const int s1d13xxxfb_prod_ids[] = { S1D13505_PROD_ID, @@ -69,7 +81,7 @@ static const char *s1d13xxxfb_prod_names[] = { }; /* - * Here we define the default struct fb_fix_screeninfo + * here we define the default struct fb_fix_screeninfo */ static struct fb_fix_screeninfo __devinitdata s1d13xxxfb_fix = { .id = S1D_FBID, @@ -145,8 +157,10 @@ crt_enable(struct s1d13xxxfb_par *par, int enable) s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode); } -/* framebuffer control routines */ +/************************************************************* + framebuffer control functions + *************************************************************/ static inline void s1d13xxxfb_setup_pseudocolour(struct fb_info *info) { @@ -242,13 +256,13 @@ s1d13xxxfb_set_par(struct fb_info *info) } /** - * s1d13xxxfb_setcolreg - sets a color register. - * @regno: Which register in the CLUT we are programming - * @red: The red value which can be up to 16 bits wide + * s1d13xxxfb_setcolreg - sets a color register. + * @regno: Which register in the CLUT we are programming + * @red: The red value which can be up to 16 bits wide * @green: The green value which can be up to 16 bits wide * @blue: The blue value which can be up to 16 bits wide. * @transp: If supported the alpha value which can be up to 16 bits wide. - * @info: frame buffer info structure + * @info: frame buffer info structure * * Returns negative errno on error, or zero on success. */ @@ -351,15 +365,15 @@ s1d13xxxfb_blank(int blank_mode, struct fb_info *info) } /** - * s1d13xxxfb_pan_display - Pans the display. - * @var: frame buffer variable screen structure - * @info: frame buffer structure that represents a single frame buffer + * s1d13xxxfb_pan_display - Pans the display. + * @var: frame buffer variable screen structure + * @info: frame buffer structure that represents a single frame buffer * * Pan (or wrap, depending on the `vmode' field) the display using the - * `yoffset' field of the `var' structure (`xoffset' not yet supported). - * If the values don't fit, return -EINVAL. + * `yoffset' field of the `var' structure (`xoffset' not yet supported). + * If the values don't fit, return -EINVAL. * - * Returns negative errno on error, or zero on success. + * Returns negative errno on error, or zero on success. */ static int s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) @@ -390,8 +404,259 @@ s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) return 0; } -/* framebuffer information structures */ +/************************************************************ + functions to handle bitblt acceleration + ************************************************************/ + +/** + * bltbit_wait_bitset - waits for change in register value + * @info : framebuffer structure + * @bit : value expected in register + * @timeout : ... + * + * waits until value changes INTO bit + */ +static u8 +bltbit_wait_bitset(struct fb_info *info, u8 bit, int timeout) +{ + while (!(s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit)) { + udelay(10); + if (!--timeout) { + dbg_blit("wait_bitset timeout\n"); + break; + } + } + + return timeout; +} + +/** + * bltbit_wait_bitclear - waits for change in register value + * @info : frambuffer structure + * @bit : value currently in register + * @timeout : ... + * + * waits until value changes FROM bit + * + */ +static u8 +bltbit_wait_bitclear(struct fb_info *info, u8 bit, int timeout) +{ + while (s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit) { + udelay(10); + if (!--timeout) { + dbg_blit("wait_bitclear timeout\n"); + break; + } + } + + return timeout; +} + +/** + * bltbit_fifo_status - checks the current status of the fifo + * @info : framebuffer structure + * + * returns number of free words in buffer + */ +static u8 +bltbit_fifo_status(struct fb_info *info) +{ + u8 status; + status = s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0); + + /* its empty so room for 16 words */ + if (status & BBLT_FIFO_EMPTY) + return 16; + + /* its full so we dont want to add */ + if (status & BBLT_FIFO_FULL) + return 0; + + /* its atleast half full but we can add one atleast */ + if (status & BBLT_FIFO_NOT_FULL) + return 1; + + return 0; +} + +/* + * s1d13xxxfb_bitblt_copyarea - accelerated copyarea function + * @info : framebuffer structure + * @area : fb_copyarea structure + * + * supports (atleast) S1D13506 + * + */ +static void +s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area) +{ + u32 dst, src; + u32 stride; + u16 reverse = 0; + u16 sx = area->sx, sy = area->sy; + u16 dx = area->dx, dy = area->dy; + u16 width = area->width, height = area->height; + u16 bpp; + + spin_lock(&s1d13xxxfb_bitblt_lock); + + /* bytes per xres line */ + bpp = (info->var.bits_per_pixel >> 3); + stride = bpp * info->var.xres; + + /* reverse, calculate the last pixel in rectangle */ + if ((dy > sy) || ((dy == sy) && (dx >= sx))) { + dst = (((dy + height - 1) * stride) + (bpp * (dx + width - 1))); + src = (((sy + height - 1) * stride) + (bpp * (sx + width - 1))); + reverse = 1; + /* not reverse, calculate the first pixel in rectangle */ + } else { /* (y * xres) + (bpp * x) */ + dst = (dy * stride) + (bpp * dx); + src = (sy * stride) + (bpp * sx); + } + + /* set source adress */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff)); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff); + + /* set destination adress */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff)); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff); + + /* program height and width */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, (width & 0xff) - 1); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (width >> 8)); + + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, (height & 0xff) - 1); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (height >> 8)); + + /* negative direction ROP */ + if (reverse == 1) { + dbg_blit("(copyarea) negative rop\n"); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x03); + } else /* positive direction ROP */ { + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x02); + dbg_blit("(copyarea) positive rop\n"); + } + + /* set for rectangel mode and not linear */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0); + + /* setup the bpp 1 = 16bpp, 0 = 8bpp*/ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (bpp >> 1)); + + /* set words per xres */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (stride >> 1) & 0xff); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (stride >> 9)); + + dbg_blit("(copyarea) dx=%d, dy=%d\n", dx, dy); + dbg_blit("(copyarea) sx=%d, sy=%d\n", sx, sy); + dbg_blit("(copyarea) width=%d, height=%d\n", width - 1, height - 1); + dbg_blit("(copyarea) stride=%d\n", stride); + dbg_blit("(copyarea) bpp=%d=0x0%d, mem_offset1=%d, mem_offset2=%d\n", bpp, (bpp >> 1), + (stride >> 1) & 0xff, stride >> 9); + + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CC_EXP, 0x0c); + + /* initialize the engine */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80); + + /* wait to complete */ + bltbit_wait_bitclear(info, 0x80, 8000); + + spin_unlock(&s1d13xxxfb_bitblt_lock); +} + +/** + * + * s1d13xxxfb_bitblt_solidfill - accelerated solidfill function + * @info : framebuffer structure + * @rect : fb_fillrect structure + * + * supports (atleast 13506) + * + **/ +static void +s1d13xxxfb_bitblt_solidfill(struct fb_info *info, const struct fb_fillrect *rect) +{ + u32 screen_stride, dest; + u32 fg; + u16 bpp = (info->var.bits_per_pixel >> 3); + + /* grab spinlock */ + spin_lock(&s1d13xxxfb_bitblt_lock); + + /* bytes per x width */ + screen_stride = (bpp * info->var.xres); + + /* bytes to starting point */ + dest = ((rect->dy * screen_stride) + (bpp * rect->dx)); + + dbg_blit("(solidfill) dx=%d, dy=%d, stride=%d, dest=%d\n" + "(solidfill) : rect_width=%d, rect_height=%d\n", + rect->dx, rect->dy, screen_stride, dest, + rect->width - 1, rect->height - 1); + + dbg_blit("(solidfill) : xres=%d, yres=%d, bpp=%d\n", + info->var.xres, info->var.yres, + info->var.bits_per_pixel); + dbg_blit("(solidfill) : rop=%d\n", rect->rop); + + /* We split the destination into the three registers */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dest & 0x00ff)); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, ((dest >> 8) & 0x00ff)); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, ((dest >> 16) & 0x00ff)); + + /* give information regarding rectangel width */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, ((rect->width) & 0x00ff) - 1); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (rect->width >> 8)); + + /* give information regarding rectangel height */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, ((rect->height) & 0x00ff) - 1); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (rect->height >> 8)); + + if (info->fix.visual == FB_VISUAL_TRUECOLOR || + info->fix.visual == FB_VISUAL_DIRECTCOLOR) { + fg = ((u32 *)info->pseudo_palette)[rect->color]; + dbg_blit("(solidfill) truecolor/directcolor\n"); + dbg_blit("(solidfill) pseudo_palette[%d] = %d\n", rect->color, fg); + } else { + fg = rect->color; + dbg_blit("(solidfill) color = %d\n", rect->color); + } + + /* set foreground color */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC0, (fg & 0xff)); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC1, (fg >> 8) & 0xff); + + /* set rectangual region of memory (rectangle and not linear) */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0); + + /* set operation mode SOLID_FILL */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, BBLT_SOLID_FILL); + + /* set bits per pixel (1 = 16bpp, 0 = 8bpp) */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (info->var.bits_per_pixel >> 4)); + + /* set the memory offset for the bblt in word sizes */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (screen_stride >> 1) & 0x00ff); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (screen_stride >> 9)); + + /* and away we go.... */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80); + + /* wait until its done */ + bltbit_wait_bitclear(info, 0x80, 8000); + + /* let others play */ + spin_unlock(&s1d13xxxfb_bitblt_lock); +} + +/* framebuffer information structures */ static struct fb_ops s1d13xxxfb_fbops = { .owner = THIS_MODULE, .fb_set_par = s1d13xxxfb_set_par, @@ -400,7 +665,7 @@ static struct fb_ops s1d13xxxfb_fbops = { .fb_pan_display = s1d13xxxfb_pan_display, - /* to be replaced by any acceleration we can */ + /* gets replaced at chip detection time */ .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, @@ -412,9 +677,9 @@ static int s1d13xxxfb_width_tab[2][4] __devinitdata = { }; /** - * s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to + * s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to * hardware setup. - * @info: frame buffer structure + * @info: frame buffer structure * * We setup the framebuffer structures according to the current * hardware setup. On some machines, the BIOS will have filled @@ -569,7 +834,6 @@ s1d13xxxfb_probe(struct platform_device *pdev) if (pdata && pdata->platform_init_video) pdata->platform_init_video(); - if (pdev->num_resources != 2) { dev_err(&pdev->dev, "invalid num_resources: %i\n", pdev->num_resources); @@ -655,16 +919,27 @@ s1d13xxxfb_probe(struct platform_device *pdev) info->fix = s1d13xxxfb_fix; info->fix.mmio_start = pdev->resource[1].start; - info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start +1; + info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start + 1; info->fix.smem_start = pdev->resource[0].start; - info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start +1; + info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start + 1; printk(KERN_INFO PFX "regs mapped at 0x%p, fb %d KiB mapped at 0x%p\n", default_par->regs, info->fix.smem_len / 1024, info->screen_base); info->par = default_par; - info->fbops = &s1d13xxxfb_fbops; info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; + info->fbops = &s1d13xxxfb_fbops; + + switch(prod_id) { + case S1D13506_PROD_ID: /* activate acceleration */ + s1d13xxxfb_fbops.fb_fillrect = s1d13xxxfb_bitblt_solidfill; + s1d13xxxfb_fbops.fb_copyarea = s1d13xxxfb_bitblt_copyarea; + info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN | + FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA; + break; + default: + break; + } /* perform "manual" chip initialization, if needed */ if (pdata && pdata->initregs) |