aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/e1000/e1000_main.c162
1 files changed, 92 insertions, 70 deletions
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 13e34d26e5d..d61af662448 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -787,6 +787,70 @@ static const struct net_device_ops e1000_netdev_ops = {
};
/**
+ * e1000_init_hw_struct - initialize members of hw struct
+ * @adapter: board private struct
+ * @hw: structure used by e1000_hw.c
+ *
+ * Factors out initialization of the e1000_hw struct to its own function
+ * that can be called very early at init (just after struct allocation).
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ * Returns negative error codes if MAC type setup fails.
+ */
+static int e1000_init_hw_struct(struct e1000_adapter *adapter,
+ struct e1000_hw *hw)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* PCI config space info */
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_id = pdev->subsystem_device;
+ hw->revision_id = pdev->revision;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+ hw->max_frame_size = adapter->netdev->mtu +
+ ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
+
+ /* identify the MAC */
+ if (e1000_set_mac_type(hw)) {
+ DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
+ return -EIO;
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->phy_init_script = 1;
+ break;
+ }
+
+ e1000_set_media_type(hw);
+ e1000_get_bus_info(hw);
+
+ hw->wait_autoneg_complete = false;
+ hw->tbi_compatibility_en = true;
+ hw->adaptive_ifs = true;
+
+ /* Copper options */
+
+ if (hw->media_type == e1000_media_type_copper) {
+ hw->mdix = AUTO_ALL_MODES;
+ hw->disable_polarity_correction = false;
+ hw->master_slave = E1000_MASTER_SLAVE;
+ }
+
+ return 0;
+}
+
+/**
* e1000_probe - Device Initialization Routine
* @pdev: PCI device information struct
* @ent: entry in e1000_pci_tbl
@@ -823,22 +887,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (err)
return err;
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
- !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
- pci_using_dac = 1;
- } else {
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (err) {
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (err) {
- E1000_ERR("No usable DMA configuration, "
- "aborting\n");
- goto err_dma;
- }
- }
- pci_using_dac = 0;
- }
-
err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
if (err)
goto err_pci_reg;
@@ -882,6 +930,32 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
}
+ /* make ready for any if (hw->...) below */
+ err = e1000_init_hw_struct(adapter, hw);
+ if (err)
+ goto err_sw_init;
+
+ /*
+ * there is a workaround being applied below that limits
+ * 64-bit DMA addresses to 64-bit hardware. There are some
+ * 32-bit adapters that Tx hang when given 64-bit DMA addresses
+ */
+ pci_using_dac = 0;
+ if ((hw->bus_type == e1000_bus_type_pcix) &&
+ !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+ /*
+ * according to DMA-API-HOWTO, coherent calls will always
+ * succeed if the set call did
+ */
+ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+ pci_using_dac = 1;
+ } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
+ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ } else {
+ pr_err("No usable DMA config, aborting\n");
+ goto err_dma;
+ }
+
netdev->netdev_ops = &e1000_netdev_ops;
e1000_set_ethtool_ops(netdev);
netdev->watchdog_timeo = 5 * HZ;
@@ -956,8 +1030,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (!is_valid_ether_addr(netdev->perm_addr))
DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
- e1000_get_bus_info(hw);
-
init_timer(&adapter->tx_fifo_stall_timer);
adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
@@ -1070,6 +1142,7 @@ err_eeprom:
iounmap(hw->flash_address);
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
+err_dma:
err_sw_init:
iounmap(hw->hw_addr);
err_ioremap:
@@ -1077,7 +1150,6 @@ err_ioremap:
err_alloc_etherdev:
pci_release_selected_regions(pdev, bars);
err_pci_reg:
-err_dma:
pci_disable_device(pdev);
return err;
}
@@ -1129,62 +1201,12 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
* @adapter: board private structure to initialize
*
* e1000_sw_init initializes the Adapter private data structure.
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
+ * e1000_init_hw_struct MUST be called before this function
**/
static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
-
- /* PCI config space info */
-
- hw->vendor_id = pdev->vendor;
- hw->device_id = pdev->device;
- hw->subsystem_vendor_id = pdev->subsystem_vendor;
- hw->subsystem_id = pdev->subsystem_device;
- hw->revision_id = pdev->revision;
-
- pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
-
adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
- hw->max_frame_size = netdev->mtu +
- ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
- hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
-
- /* identify the MAC */
-
- if (e1000_set_mac_type(hw)) {
- DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
- return -EIO;
- }
-
- switch (hw->mac_type) {
- default:
- break;
- case e1000_82541:
- case e1000_82547:
- case e1000_82541_rev_2:
- case e1000_82547_rev_2:
- hw->phy_init_script = 1;
- break;
- }
-
- e1000_set_media_type(hw);
-
- hw->wait_autoneg_complete = false;
- hw->tbi_compatibility_en = true;
- hw->adaptive_ifs = true;
-
- /* Copper options */
-
- if (hw->media_type == e1000_media_type_copper) {
- hw->mdix = AUTO_ALL_MODES;
- hw->disable_polarity_correction = false;
- hw->master_slave = E1000_MASTER_SLAVE;
- }
adapter->num_tx_queues = 1;
adapter->num_rx_queues = 1;
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-25 22:03:49 +0000