diff options
Diffstat (limited to 'drivers')
25 files changed, 824 insertions, 1911 deletions
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c index af7cb2bfd67..01f042f6f1c 100644 --- a/drivers/block/swim3.c +++ b/drivers/block/swim3.c @@ -1083,23 +1083,33 @@ static int swim3_add_device(struct device_node *swim) { struct device_node *mediabay; struct floppy_state *fs = &floppy_states[floppy_count]; + struct resource res_reg, res_dma; - if (swim->n_addrs < 2) - { - printk(KERN_INFO "swim3: expecting 2 addrs (n_addrs:%d, n_intrs:%d)\n", - swim->n_addrs, swim->n_intrs); + if (of_address_to_resource(swim, 0, &res_reg) || + of_address_to_resource(swim, 1, &res_dma)) { + printk(KERN_ERR "swim3: Can't get addresses\n"); return -EINVAL; } - - if (swim->n_intrs < 2) - { - printk(KERN_INFO "swim3: expecting 2 intrs (n_addrs:%d, n_intrs:%d)\n", - swim->n_addrs, swim->n_intrs); + if (request_mem_region(res_reg.start, res_reg.end - res_reg.start + 1, + " (reg)") == NULL) { + printk(KERN_ERR "swim3: Can't request register space\n"); + return -EINVAL; + } + if (request_mem_region(res_dma.start, res_dma.end - res_dma.start + 1, + " (dma)") == NULL) { + release_mem_region(res_reg.start, + res_reg.end - res_reg.start + 1); + printk(KERN_ERR "swim3: Can't request DMA space\n"); return -EINVAL; } - if (!request_OF_resource(swim, 0, NULL)) { - printk(KERN_INFO "swim3: can't request IO resource !\n"); + if (swim->n_intrs < 2) { + printk(KERN_INFO "swim3: expecting 2 intrs (n_intrs:%d)\n", + swim->n_intrs); + release_mem_region(res_reg.start, + res_reg.end - res_reg.start + 1); + release_mem_region(res_dma.start, + res_dma.end - res_dma.start + 1); return -EINVAL; } @@ -1110,10 +1120,8 @@ static int swim3_add_device(struct device_node *swim) memset(fs, 0, sizeof(*fs)); spin_lock_init(&fs->lock); fs->state = idle; - fs->swim3 = (struct swim3 __iomem *) - ioremap(swim->addrs[0].address, 0x200); - fs->dma = (struct dbdma_regs __iomem *) - ioremap(swim->addrs[1].address, 0x200); + fs->swim3 = (struct swim3 __iomem *)ioremap(res_reg.start, 0x200); + fs->dma = (struct dbdma_regs __iomem *)ioremap(res_dma.start, 0x200); fs->swim3_intr = swim->intrs[0].line; fs->dma_intr = swim->intrs[1].line; fs->cur_cyl = -1; diff --git a/drivers/char/watchdog/mpc8xx_wdt.c b/drivers/char/watchdog/mpc8xx_wdt.c index 56d62ba7c6c..b2fc71e2085 100644 --- a/drivers/char/watchdog/mpc8xx_wdt.c +++ b/drivers/char/watchdog/mpc8xx_wdt.c @@ -18,6 +18,7 @@ #include <linux/watchdog.h> #include <asm/8xx_immap.h> #include <asm/uaccess.h> +#include <asm/io.h> #include <syslib/m8xx_wdt.h> static unsigned long wdt_opened; @@ -25,18 +26,26 @@ static int wdt_status; static void mpc8xx_wdt_handler_disable(void) { - volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; + volatile uint __iomem *piscr; + piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr; - imap->im_sit.sit_piscr &= ~(PISCR_PIE | PISCR_PTE); + if (!m8xx_has_internal_rtc) + m8xx_wdt_stop_timer(); + else + out_be32(piscr, in_be32(piscr) & ~(PISCR_PIE | PISCR_PTE)); printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler deactivated\n"); } static void mpc8xx_wdt_handler_enable(void) { - volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; + volatile uint __iomem *piscr; + piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr; - imap->im_sit.sit_piscr |= PISCR_PIE | PISCR_PTE; + if (!m8xx_has_internal_rtc) + m8xx_wdt_install_timer(); + else + out_be32(piscr, in_be32(piscr) | PISCR_PIE | PISCR_PTE); printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler activated\n"); } @@ -68,9 +77,6 @@ static int mpc8xx_wdt_release(struct inode *inode, struct file *file) static ssize_t mpc8xx_wdt_write(struct file *file, const char *data, size_t len, loff_t * ppos) { - if (ppos != &file->f_pos) - return -ESPIPE; - if (len) m8xx_wdt_reset(); diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 4010fe92e72..08d5b8fed2d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -236,27 +236,17 @@ config I2C_IXP2000 This support is also available as a module. If so, the module will be called i2c-ixp2000. -config I2C_KEYWEST - tristate "Powermac Keywest I2C interface" +config I2C_POWERMAC + tristate "Powermac I2C interface" depends on I2C && PPC_PMAC + default y help - This supports the use of the I2C interface in the combo-I/O - chip on recent Apple machines. Say Y if you have such a machine. - - This support is also available as a module. If so, the module - will be called i2c-keywest. - -config I2C_PMAC_SMU - tristate "Powermac SMU I2C interface" - depends on I2C && PMAC_SMU - help - This supports the use of the I2C interface in the SMU - chip on recent Apple machines like the iMac G5. It is used - among others by the thermal control driver for those machines. - Say Y if you have such a machine. + This exposes the various PowerMac i2c interfaces to the linux i2c + layer and to userland. It is used by various drivers on the powemac + platform, thus should generally be enabled. This support is also available as a module. If so, the module - will be called i2c-pmac-smu. + will be called i2c-powermac. config I2C_MPC tristate "MPC107/824x/85xx/52xx" diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index f1df00f66c6..b44831dff68 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -19,8 +19,7 @@ obj-$(CONFIG_I2C_ISA) += i2c-isa.o obj-$(CONFIG_I2C_ITE) += i2c-ite.o obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o -obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest.o -obj-$(CONFIG_I2C_PMAC_SMU) += i2c-pmac-smu.o +obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c deleted file mode 100644 index d61f748278f..00000000000 --- a/drivers/i2c/busses/i2c-keywest.c +++ /dev/null @@ -1,751 +0,0 @@ -/* - i2c Support for Apple Keywest I2C Bus Controller - - Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org> - - Original work by - - Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Changes: - - 2001/12/13 BenH New implementation - 2001/12/15 BenH Add support for "byte" and "quick" - transfers. Add i2c_xfer routine. - 2003/09/21 BenH Rework state machine with Paulus help - 2004/01/21 BenH Merge in Greg KH changes, polled mode is back - 2004/02/05 BenH Merge 64 bits fixes from the g5 ppc64 tree - - My understanding of the various modes supported by keywest are: - - - Dumb mode : not implemented, probably direct tweaking of lines - - Standard mode : simple i2c transaction of type - S Addr R/W A Data A Data ... T - - Standard sub mode : combined 8 bit subaddr write with data read - S Addr R/W A SubAddr A Data A Data ... T - - Combined mode : Subaddress and Data sequences appended with no stop - S Addr R/W A SubAddr S Addr R/W A Data A Data ... T - - Currently, this driver uses only Standard mode for i2c xfer, and - smbus byte & quick transfers ; and uses StandardSub mode for - other smbus transfers instead of combined as we need that for the - sound driver to be happy -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/types.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/timer.h> -#include <linux/spinlock.h> -#include <linux/completion.h> -#include <linux/interrupt.h> - -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/machdep.h> -#include <asm/pmac_feature.h> -#include <asm/pmac_low_i2c.h> - -#include "i2c-keywest.h" - -#undef POLLED_MODE - -/* Some debug macros */ -#define WRONG_STATE(name) do {\ - pr_debug("KW: wrong state. Got %s, state: %s (isr: %02x)\n", \ - name, __kw_state_names[iface->state], isr); \ - } while(0) - -#ifdef DEBUG -static const char *__kw_state_names[] = { - "state_idle", - "state_addr", - "state_read", - "state_write", - "state_stop", - "state_dead" -}; -#endif /* DEBUG */ - -MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); -MODULE_DESCRIPTION("I2C driver for Apple's Keywest"); -MODULE_LICENSE("GPL"); - -#ifdef POLLED_MODE -/* Don't schedule, the g5 fan controller is too - * timing sensitive - */ -static u8 -wait_interrupt(struct keywest_iface* iface) -{ - int i; - u8 isr; - - for (i = 0; i < 200000; i++) { - isr = read_reg(reg_isr) & KW_I2C_IRQ_MASK; - if (isr != 0) - return isr; - udelay(10); - } - return isr; -} -#endif /* POLLED_MODE */ - -static void -do_stop(struct keywest_iface* iface, int result) -{ - write_reg(reg_control, KW_I2C_CTL_STOP); - iface->state = state_stop; - iface->result = result; -} - -/* Main state machine for standard & standard sub mode */ -static void -handle_interrupt(struct keywest_iface *iface, u8 isr) -{ - int ack; - - if (isr == 0) { - if (iface->state != state_stop) { - pr_debug("KW: Timeout !\n"); - do_stop(iface, -EIO); - } - if (iface->state == state_stop) { - ack = read_reg(reg_status); - if (!(ack & KW_I2C_STAT_BUSY)) { - iface->state = state_idle; - write_reg(reg_ier, 0x00); -#ifndef POLLED_MODE - complete(&iface->complete); -#endif /* POLLED_MODE */ - } - } - return; - } - - if (isr & KW_I2C_IRQ_ADDR) { - ack = read_reg(reg_status); - if (iface->state != state_addr) { - write_reg(reg_isr, KW_I2C_IRQ_ADDR); - WRONG_STATE("KW_I2C_IRQ_ADDR"); - do_stop(iface, -EIO); - return; - } - if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { - iface->state = state_stop; - iface->result = -ENODEV; - pr_debug("KW: NAK on address\n"); - } else { - /* Handle rw "quick" mode */ - if (iface->datalen == 0) { - do_stop(iface, 0); - } else if (iface->read_write == I2C_SMBUS_READ) { - iface->state = state_read; - if (iface->datalen > 1) - write_reg(reg_control, KW_I2C_CTL_AAK); - } else { - iface->state = state_write; - write_reg(reg_data, *(iface->data++)); - iface->datalen--; - } - } - write_reg(reg_isr, KW_I2C_IRQ_ADDR); - } - - if (isr & KW_I2C_IRQ_DATA) { - if (iface->state == state_read) { - *(iface->data++) = read_reg(reg_data); - write_reg(reg_isr, KW_I2C_IRQ_DATA); - iface->datalen--; - if (iface->datalen == 0) - iface->state = state_stop; - else if (iface->datalen == 1) - write_reg(reg_control, 0); - } else if (iface->state == state_write) { - /* Check ack status */ - ack = read_reg(reg_status); - if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { - pr_debug("KW: nack on data write (%x): %x\n", - iface->data[-1], ack); - do_stop(iface, -EIO); - } else if (iface->datalen) { - write_reg(reg_data, *(iface->data++)); - iface->datalen--; - } else { - write_reg(reg_control, KW_I2C_CTL_STOP); - iface->state = state_stop; - iface->result = 0; - } - write_reg(reg_isr, KW_I2C_IRQ_DATA); - } else { - write_reg(reg_isr, KW_I2C_IRQ_DATA); - WRONG_STATE("KW_I2C_IRQ_DATA"); - if (iface->state != state_stop) - do_stop(iface, -EIO); - } - } - - if (isr & KW_I2C_IRQ_STOP) { - write_reg(reg_isr, KW_I2C_IRQ_STOP); - if (iface->state != state_stop) { - WRONG_STATE("KW_I2C_IRQ_STOP"); - iface->result = -EIO; - } - iface->state = state_idle; - write_reg(reg_ier, 0x00); -#ifndef POLLED_MODE - complete(&iface->complete); -#endif /* POLLED_MODE */ - } - - if (isr & KW_I2C_IRQ_START) - write_reg(reg_isr, KW_I2C_IRQ_START); -} - -#ifndef POLLED_MODE - -/* Interrupt handler */ -static irqreturn_t -keywest_irq(int irq, void *dev_id, struct pt_regs *regs) -{ - struct keywest_iface *iface = (struct keywest_iface *)dev_id; - unsigned long flags; - - spin_lock_irqsave(&iface->lock, flags); - del_timer(&iface->timeout_timer); - handle_interrupt(iface, read_reg(reg_isr)); - if (iface->state != state_idle) { - iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; - add_timer(&iface->timeout_timer); - } - spin_unlock_irqrestore(&iface->lock, flags); - return IRQ_HANDLED; -} - -static void -keywest_timeout(unsigned long data) -{ - struct keywest_iface *iface = (struct keywest_iface *)data; - unsigned long flags; - - pr_debug("timeout !\n"); - spin_lock_irqsave(&iface->lock, flags); - handle_interrupt(iface, read_reg(reg_isr)); - if (iface->state != state_idle) { - iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; - add_timer(&iface->timeout_timer); - } - spin_unlock_irqrestore(&iface->lock, flags); -} - -#endif /* POLLED_MODE */ - -/* - * SMBUS-type transfer entrypoint - */ -static s32 -keywest_smbus_xfer( struct i2c_adapter* adap, - u16 addr, - unsigned short flags, - char read_write, - u8 command, - int size, - union i2c_smbus_data* data) -{ - struct keywest_chan* chan = i2c_get_adapdata(adap); - struct keywest_iface* iface = chan->iface; - int len; - u8* buffer; - u16 cur_word; - int rc = 0; - - if (iface->state == state_dead) - return -ENXIO; - - /* Prepare datas & select mode */ - iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK; - switch (size) { - case I2C_SMBUS_QUICK: - len = 0; - buffer = NULL; - iface->cur_mode |= KW_I2C_MODE_STANDARD; - break; - case I2C_SMBUS_BYTE: - len = 1; - buffer = &data->byte; - iface->cur_mode |= KW_I2C_MODE_STANDARD; - break; - case I2C_SMBUS_BYTE_DATA: - len = 1; - buffer = &data->byte; - iface->cur_mode |= KW_I2C_MODE_STANDARDSUB; - break; - case I2C_SMBUS_WORD_DATA: - len = 2; - cur_word = cpu_to_le16(data->word); - buffer = (u8 *)&cur_word; - iface->cur_mode |= KW_I2C_MODE_STANDARDSUB; - break; - case I2C_SMBUS_BLOCK_DATA: - len = data->block[0]; - buffer = &data->block[1]; - iface->cur_mode |= KW_I2C_MODE_STANDARDSUB; - break; - default: - return -1; - } - - /* Turn a standardsub read into a combined mode access */ - if (read_write == I2C_SMBUS_READ - && (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB) { - iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK; - iface->cur_mode |= KW_I2C_MODE_COMBINED; - } - - /* Original driver had this limitation */ - if (len > 32) - len = 32; - - if (pmac_low_i2c_lock(iface->node)) - return -ENXIO; - - pr_debug("chan: %d, addr: 0x%x, transfer len: %d, read: %d\n", - chan->chan_no, addr, len, read_write == I2C_SMBUS_READ); - - iface->data = buffer; - iface->datalen = len; - iface->state = state_addr; - iface->result = 0; - iface->read_write = read_write; - - /* Setup channel & clear pending irqs */ - write_reg(reg_isr, read_reg(reg_isr)); - write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4)); - write_reg(reg_status, 0); - - /* Set up address and r/w bit */ - write_reg(reg_addr, - (addr << 1) | ((read_write == I2C_SMBUS_READ) ? 0x01 : 0x00)); - - /* Set up the sub address */ - if ((iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB - || (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED) - write_reg(reg_subaddr, command); - -#ifndef POLLED_MODE - /* Arm timeout */ - iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; - add_timer(&iface->timeout_timer); -#endif - - /* Start sending address & enable interrupt*/ - write_reg(reg_control, KW_I2C_CTL_XADDR); - write_reg(reg_ier, KW_I2C_IRQ_MASK); - -#ifdef POLLED_MODE - pr_debug("using polled mode...\n"); - /* State machine, to turn into an interrupt handler */ - while(iface->state != state_idle) { - unsigned long flags; - - u8 isr = wait_interrupt(iface); - spin_lock_irqsave(&iface->lock, flags); - handle_interrupt(iface, isr); - spin_unlock_irqrestore(&iface->lock, flags); - } -#else /* POLLED_MODE */ - pr_debug("using interrupt mode...\n"); - wait_for_completion(&iface->complete); -#endif /* POLLED_MODE */ - - rc = iface->result; - pr_debug("transfer done, result: %d\n", rc); - - if (rc == 0 && size == I2C_SMBUS_WORD_DATA && read_write == I2C_SMBUS_READ) - data->word = le16_to_cpu(cur_word); - - /* Release sem */ - pmac_low_i2c_unlock(iface->node); - - return rc; -} - -/* - * Generic i2c master transfer entrypoint - */ -static int -keywest_xfer( struct i2c_adapter *adap, - struct i2c_msg *msgs, - int num) -{ - struct keywest_chan* chan = i2c_get_adapdata(adap); - struct keywest_iface* iface = chan->iface; - struct i2c_msg *pmsg; - int i, completed; - int rc = 0; - - if (iface->state == state_dead) - return -ENXIO; - - if (pmac_low_i2c_lock(iface->node)) - return -ENXIO; - - /* Set adapter to standard mode */ - iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK; - iface->cur_mode |= KW_I2C_MODE_STANDARD; - - completed = 0; - for (i = 0; rc >= 0 && i < num;) { - u8 addr; - - pmsg = &msgs[i++]; - addr = pmsg->addr; - if (pmsg->flags & I2C_M_TEN) { - printk(KERN_ERR "i2c-keywest: 10 bits addr not supported !\n"); - rc = -EINVAL; - break; - } - pr_debug("xfer: chan: %d, doing %s %d bytes to 0x%02x - %d of %d messages\n", - chan->chan_no, - pmsg->flags & I2C_M_RD ? "read" : "write", - pmsg->len, addr, i, num); - - /* Setup channel & clear pending irqs */ - write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4)); - write_reg(reg_isr, read_reg(reg_isr)); - write_reg(reg_status, 0); - - iface->data = pmsg->buf; - iface->datalen = pmsg->len; - iface->state = state_addr; - iface->result = 0; - if (pmsg->flags & I2C_M_RD) - iface->read_write = I2C_SMBUS_READ; - else - iface->read_write = I2C_SMBUS_WRITE; - - /* Set up address and r/w bit */ - if (pmsg->flags & I2C_M_REV_DIR_ADDR) - addr ^= 1; - write_reg(reg_addr, - (addr << 1) | - ((iface->read_write == I2C_SMBUS_READ) ? 0x01 : 0x00)); - -#ifndef POLLED_MODE - /* Arm timeout */ - iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; - add_timer(&iface->timeout_timer); -#endif - - /* Start sending address & enable interrupt*/ - write_reg(reg_ier, KW_I2C_IRQ_MASK); - write_reg(reg_control, KW_I2C_CTL_XADDR); - -#ifdef POLLED_MODE - pr_debug("using polled mode...\n"); - /* State machine, to turn into an interrupt handler */ - while(iface->state != state_idle) { - u8 isr = wait_interrupt(iface); - handle_interrupt(iface, isr); - } -#else /* POLLED_MODE */ - pr_debug("using interrupt mode...\n"); - wait_for_completion(&iface->complete); -#endif /* POLLED_MODE */ - - rc = iface->result; - if (rc == 0) - completed++; - pr_debug("transfer done, result: %d\n", rc); - } - - /* Release sem */ - pmac_low_i2c_unlock(iface->node); - - return completed; -} - -static u32 -keywest_func(struct i2c_adapter * adapter) -{ - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA; -} - -/* For now, we only handle combined mode (smbus) */ -static struct i2c_algorithm keywest_algorithm = { - .smbus_xfer = keywest_smbus_xfer, - .master_xfer = keywest_xfer, - .functionality = keywest_func, -}; - - -static int -create_iface(struct device_node *np, struct device *dev) -{ - unsigned long steps; - unsigned bsteps, tsize, i, nchan, addroffset; - struct keywest_iface* iface; - u32 *psteps, *prate; - int rc; - - if (np->n_intrs < 1 || np->n_addrs < 1) { - printk(KERN_ERR "%s: Missing interrupt or address !\n", - np->full_name); - return -ENODEV; - } - if (pmac_low_i2c_lock(np)) - return -ENODEV; - - psteps = (u32 *)get_property(np, "AAPL,address-step", NULL); - steps = psteps ? (*psteps) : 0x10; - - /* Hrm... maybe we can be smarter here */ - for (bsteps = 0; (steps & 0x01) == 0; bsteps++) - steps >>= 1; - - if (np->parent->name[0] == 'u') { - nchan = 2; - addroffset = 3; - } else { - addroffset = 0; - nchan = 1; - } - - tsize = sizeof(struct keywest_iface) + - (sizeof(struct keywest_chan) + 4) * nchan; - iface = kzalloc(tsize, GFP_KERNEL); - if (iface == NULL) { - printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n"); - pmac_low_i2c_unlock(np); - return -ENOMEM; - } - spin_lock_init(&iface->lock); - init_completion(&iface->complete); - iface->node = of_node_get(np); - iface->bsteps = bsteps; - iface->chan_count = nchan; - iface->state = state_idle; - iface->irq = np->intrs[0].line; - iface->channels = (struct keywest_chan *) - (((unsigned long)(iface + 1) + 3UL) & ~3UL); - iface->base = ioremap(np->addrs[0].address + addroffset, - np->addrs[0].size); - if (!iface->base) { - printk(KERN_ERR "i2c-keywest: can't map inteface !\n"); - kfree(iface); - pmac_low_i2c_unlock(np); - return -ENOMEM; - } - -#ifndef POLLED_MODE - init_timer(&iface->timeout_timer); - iface->timeout_timer.function = keywest_timeout; - iface->timeout_timer.data = (unsigned long)iface; -#endif - - /* Select interface rate */ - iface->cur_mode = KW_I2C_MODE_100KHZ; - prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL); - if (prate) switch(*prate) { - case 100: - iface->cur_mode = KW_I2C_MODE_100KHZ; - break; - case 50: - iface->cur_mode = KW_I2C_MODE_50KHZ; - break; - case 25: - iface->cur_mode = KW_I2C_MODE_25KHZ; - break; - default: - printk(KERN_WARNING "i2c-keywest: unknown rate %ldKhz, using 100KHz\n", - (long)*prate); - } - - /* Select standard mode by default */ - iface->cur_mode |= KW_I2C_MODE_STANDARD; - - /* Write mode */ - write_reg(reg_mode, iface->cur_mode); - - /* Switch interrupts off & clear them*/ - write_reg(reg_ier, 0x00); - write_reg(reg_isr, KW_I2C_IRQ_MASK); - -#ifndef POLLED_MODE - /* Request chip interrupt */ - rc = request_irq(iface->irq, keywest_irq, SA_INTERRUPT, "keywest i2c", iface); - if (rc) { - printk(KERN_ERR "i2c-keywest: can't get IRQ %d !\n", iface->irq); - iounmap(iface->base); - kfree(iface); - pmac_low_i2c_unlock(np); - return -ENODEV; - } -#endif /* POLLED_MODE */ - - pmac_low_i2c_unlock(np); - dev_set_drvdata(dev, iface); - - for (i=0; i<nchan; i++) { - struct keywest_chan* chan = &iface->channels[i]; - - sprintf(chan->adapter.name, "%s %d", np->parent->name, i); - chan->iface = iface; - chan->chan_no = i; - chan->adapter.algo = &keywest_algorithm; - chan->adapter.algo_data = NULL; - chan->adapter.client_register = NULL; - chan->adapter.client_unregister = NULL; - i2c_set_adapdata(&chan->adapter, chan); - chan->adapter.dev.parent = dev; - - rc = i2c_add_adapter(&chan->adapter); - if (rc) { - printk("i2c-keywest.c: Adapter %s registration failed\n", - chan->adapter.name); - i2c_set_adapdata(&chan->adapter, NULL); - } - } - - printk(KERN_INFO "Found KeyWest i2c on \"%s\", %d channel%s, stepping: %d bits\n", - np->parent->name, nchan, nchan > 1 ? "s" : "", bsteps); - - return 0; -} - -static int -dispose_iface(struct device *dev) -{ - struct keywest_iface *iface = dev_get_drvdata(dev); - int i, rc; - - /* Make sure we stop all activity */ - if (pmac_low_i2c_lock(iface->node)) - return -ENODEV; - -#ifndef POLLED_MODE - spin_lock_irq(&iface->lock); - while (iface->state != state_idle) { - spin_unlock_irq(&iface->lock); - msleep(100); - spin_lock_irq(&iface->lock); - } -#endif /* POLLED_MODE */ - iface->state = state_dead; -#ifndef POLLED_MODE - spin_unlock_irq(&iface->lock); - free_irq(iface->irq, iface); -#endif /* POLLED_MODE */ - - pmac_low_i2c_unlock(iface->node); - - /* Release all channels */ - for (i=0; i<iface->chan_count; i++) { - struct keywest_chan* chan = &iface->channels[i]; - if (i2c_get_adapdata(&chan->adapter) == NULL) - continue; - rc = i2c_del_adapter(&chan->adapter); - i2c_set_adapdata(&chan->adapter, NULL); - /* We aren't that prepared to deal with this... */ - if (rc) - printk("i2c-keywest.c: i2c_del_adapter failed, that's bad !\n"); - } - iounmap(iface->base); - dev_set_drvdata(dev, NULL); - of_node_put(iface->node); - kfree(iface); - - return 0; -} - -static int -create_iface_macio(struct macio_dev* dev, const struct of_device_id *match) -{ - return create_iface(dev->ofdev.node, &dev->ofdev.dev); -} - -static int -dispose_iface_macio(struct macio_dev* dev) -{ - return dispose_iface(&dev->ofdev.dev); -} - -static int -create_iface_of_platform(struct of_device* dev, const struct of_device_id *match) -{ - return create_iface(dev->node, &dev->dev); -} - -static int -dispose_iface_of_platform(struct of_device* dev) -{ - return dispose_iface(&dev->dev); -} - -static struct of_device_id i2c_keywest_match[] = -{ - { - .type = "i2c", - .compatible = "keywest" - }, - {}, -}; - -static struct macio_driver i2c_keywest_macio_driver = -{ - .owner = THIS_MODULE, - .name = "i2c-keywest", - .match_table = i2c_keywest_match, - .probe = create_iface_macio, - .remove = dispose_iface_macio -}; - -static struct of_platform_driver i2c_keywest_of_platform_driver = -{ - .owner = THIS_MODULE, - .name = "i2c-keywest", - .match_table = i2c_keywest_match, - .probe = create_iface_of_platform, - .remove = dispose_iface_of_platform -}; - -static int __init -i2c_keywest_init(void) -{ - of_register_driver(&i2c_keywest_of_platform_driver); - macio_register_driver(&i2c_keywest_macio_driver); - - return 0; -} - -static void __exit -i2c_keywest_cleanup(void) -{ - of_unregister_driver(&i2c_keywest_of_platform_driver); - macio_unregister_driver(&i2c_keywest_macio_driver); -} - -module_init(i2c_keywest_init); -module_exit(i2c_keywest_cleanup); diff --git a/drivers/i2c/busses/i2c-keywest.h b/drivers/i2c/busses/i2c-keywest.h deleted file mode 100644 index c5022e1ca6f..00000000000 --- a/drivers/i2c/busses/i2c-keywest.h +++ /dev/null @@ -1,108 +0,0 @@ -#ifndef __I2C_KEYWEST_H__ -#define __I2C_KEYWEST_H__ - -/* The Tumbler audio equalizer can be really slow sometimes */ -#define POLL_TIMEOUT (2*HZ) - -/* Register indices */ -typedef enum { - reg_mode = 0, - reg_control, - reg_status, - reg_isr, - reg_ier, - reg_addr, - reg_subaddr, - reg_data -} reg_t; - - -/* Mode register */ -#define KW_I2C_MODE_100KHZ 0x00 -#define KW_I2C_MODE_50KHZ 0x01 -#define KW_I2C_MODE_25KHZ 0x02 -#define KW_I2C_MODE_DUMB 0x00 -#define KW_I2C_MODE_STANDARD 0x04 -#define KW_I2C_MODE_STANDARDSUB 0x08 -#define KW_I2C_MODE_COMBINED 0x0C -#define KW_I2C_MODE_MODE_MASK 0x0C -#define KW_I2C_MODE_CHAN_MASK 0xF0 - -/* Control register */ -#define KW_I2C_CTL_AAK 0x01 -#define KW_I2C_CTL_XADDR 0x02 -#define KW_I2C_CTL_STOP 0x04 -#define KW_I2C_CTL_START 0x08 - -/* Status register */ -#define KW_I2C_STAT_BUSY 0x01 -#define KW_I2C_STAT_LAST_AAK 0x02 -#define KW_I2C_STAT_LAST_RW 0x04 -#define KW_I2C_STAT_SDA 0x08 -#define KW_I2C_STAT_SCL 0x10 - -/* IER & ISR registers */ -#define KW_I2C_IRQ_DATA 0x01 -#define KW_I2C_IRQ_ADDR 0x02 -#define KW_I2C_IRQ_STOP 0x04 -#define KW_I2C_IRQ_START 0x08 -#define KW_I2C_IRQ_MASK 0x0F - -/* Physical interface */ -struct keywest_iface -{ - struct device_node *node; - void __iomem * base; - unsigned bsteps; - int irq; - spinlock_t lock; - struct keywest_chan *channels; - unsigned chan_count; - u8 cur_mode; - char read_write; - u8 *data; - unsigned datalen; - int state; - int result; - struct timer_list timeout_timer; - struct completion complete; -}; - -enum { - state_idle, - state_addr, - state_read, - state_write, - state_stop, - state_dead -}; - -/* Channel on an interface */ -struct keywest_chan -{ - struct i2c_adapter adapter; - struct keywest_iface* iface; - unsigned chan_no; -}; - -/* Register access */ - -static inline u8 __read_reg(struct keywest_iface *iface, reg_t reg) -{ - return in_8(iface->base - + (((unsigned)reg) << iface->bsteps)); -} - -static inline void __write_reg(struct keywest_iface *iface, reg_t reg, u8 val) -{ - out_8(iface->base - + (((unsigned)reg) << iface->bsteps), val); - (void)__read_reg(iface, reg_subaddr); -} - -#define write_reg(reg, val) __write_reg(iface, reg, val) -#define read_reg(reg) __read_reg(iface, reg) - - - -#endif /* __I2C_KEYWEST_H__ */ diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c deleted file mode 100644 index bfefe7f7a53..00000000000 --- a/drivers/i2c/busses/i2c-pmac-smu.c +++ /dev/null @@ -1,315 +0,0 @@ -/* - i2c Support for Apple SMU Controller - - Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp. - <benh@kernel.crashing.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -*/ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/completion.h> -#include <linux/device.h> -#include <asm/prom.h> -#include <asm/of_device.h> -#include <asm/smu.h> - -static int probe; - -MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); -MODULE_DESCRIPTION("I2C driver for Apple's SMU"); -MODULE_LICENSE("GPL"); -module_param(probe, bool, 0); - - -/* Physical interface */ -struct smu_iface -{ - struct i2c_adapter adapter; - struct completion complete; - u32 busid; -}; - -static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc) -{ - struct smu_iface *iface = misc; - complete(&iface->complete); -} - -/* - * SMBUS-type transfer entrypoint - */ -static s32 smu_smbus_xfer( struct i2c_adapter* adap, - u16 addr, - unsigned short flags, - char read_write, - u8 command, - int size, - union i2c_smbus_data* data) -{ - struct smu_iface *iface = i2c_get_adapdata(adap); - struct smu_i2c_cmd cmd; - int rc = 0; - int read = (read_write == I2C_SMBUS_READ); - - cmd.info.bus = iface->busid; - cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00); - - /* Prepare datas & select mode */ - switch (size) { - case I2C_SMBUS_QUICK: - cmd.info.type = SMU_I2C_TRANSFER_SIMPLE; - cmd.info.datalen = 0; - break; - case I2C_SMBUS_BYTE: - cmd.info.type = SMU_I2C_TRANSFER_SIMPLE; - cmd.info.datalen = 1; - if (!read) - cmd.info.data[0] = data->byte; - break; - case I2C_SMBUS_BYTE_DATA: - cmd.info.type = SMU_I2C_TRANSFER_STDSUB; - cmd.info.datalen = 1; - cmd.info.sublen = 1; - cmd.info.subaddr[0] = command; - cmd.info.subaddr[1] = 0; - cmd.info.subaddr[2] = 0; - if (!read) - cmd.info.data[0] = data->byte; - break; - case I2C_SMBUS_WORD_DATA: - cmd.info.type = SMU_I2C_TRANSFER_STDSUB; - cmd.info.datalen = 2; - cmd.info.sublen = 1; - cmd.info.subaddr[0] = command; - cmd.info.subaddr[1] = 0; - cmd.info.subaddr[2] = 0; - if (!read) { - cmd.info.data[0] = data->byte & 0xff; - cmd.info.data[1] = (data->byte >> 8) & 0xff; - } - break; - /* Note that these are broken vs. the expected smbus API where - * on reads, the lenght is actually returned from the function, - * but I think the current API makes no sense and I don't want - * any driver that I haven't verified for correctness to go - * anywhere near a pmac i2c bus anyway ... - */ - case I2C_SMBUS_BLOCK_DATA: - cmd.info.type = SMU_I2C_TRANSFER_STDSUB; - cmd.info.datalen = data->block[0] + 1; - if (cmd.info.datalen > 6) - return -EINVAL; - if (!read) - memcpy(cmd.info.data, data->block, cmd.info.datalen); - cmd.info.sublen = 1; - cmd.info.subaddr[0] = command; - cmd.info.subaddr[1] = 0; - cmd.info.subaddr[2] = 0; - break; - case I2C_SMBUS_I2C_BLOCK_DATA: - cmd.info.type = SMU_I2C_TRANSFER_STDSUB; - cmd.info.datalen = data->block[0]; - if (cmd.info.datalen > 7) - return -EINVAL; - if (!read) - memcpy(cmd.info.data, &data->block[1], - cmd.info.datalen); - cmd.info.sublen = 1; - cmd.info.subaddr[0] = command; - cmd.info.subaddr[1] = 0; - cmd.info.subaddr[2] = 0; - break; - - default: - return -EINVAL; - } - - /* Turn a standardsub read into a combined mode access */ - if (read_write == I2C_SMBUS_READ && - cmd.info.type == SMU_I2C_TRANSFER_STDSUB) - cmd.info.type = SMU_I2C_TRANSFER_COMBINED; - - /* Finish filling command and submit it */ - cmd.done = smu_i2c_done; - cmd.misc = iface; - rc = smu_queue_i2c(&cmd); - if (rc < 0) - return rc; - wait_for_completion(&iface->complete); - rc = cmd.status; - - if (!read || rc < 0) - return rc; - - switch (size) { - case I2C_SMBUS_BYTE: - case I2C_SMBUS_BYTE_DATA: - data->byte = cmd.info.data[0]; - break; - case I2C_SMBUS_WORD_DATA: - data->word = ((u16)cmd.info.data[1]) << 8; - data->word |= cmd.info.data[0]; - break; - /* Note that these are broken vs. the expected smbus API where - * on reads, the lenght is actually returned from the function, - * but I think the current API makes no sense and I don't want - * any driver that I haven't verified for correctness to go - * anywhere near a pmac i2c bus anyway ... - */ - case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_I2C_BLOCK_DATA: - memcpy(&data->block[0], cmd.info.data, cmd.info.datalen); - break; - } - - return rc; -} - -static u32 -smu_smbus_func(struct i2c_adapter * adapter) -{ - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA; -} - -/* For now, we only handle combined mode (smbus) */ -static struct i2c_algorithm smu_algorithm = { - .smbus_xfer = smu_smbus_xfer, - .functionality = smu_smbus_func, -}; - -static int create_iface(struct device_node *np, struct device *dev) -{ - struct smu_iface* iface; - u32 *reg, busid; - int rc; - - reg = (u32 *)get_property(np, "reg", NULL); - if (reg == NULL) { - printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n"); - return -ENXIO; - } - busid = *reg; - - iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL); - if (iface == NULL) { - printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n"); - return -ENOMEM; - } - init_completion(&iface->complete); - iface->busid = busid; - - dev_set_drvdata(dev, iface); - - sprintf(iface->adapter.name, "smu-i2c-%02x", busid); - iface->adapter.algo = &smu_algorithm; - iface->adapter.algo_data = NULL; - iface->adapter.client_register = NULL; - iface->adapter.client_unregister = NULL; - i2c_set_adapdata(&iface->adapter, iface); - iface->adapter.dev.parent = dev; - - rc = i2c_add_adapter(&iface->adapter); - if (rc) { - printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration " - "failed\n", iface->adapter.name); - i2c_set_adapdata(&iface->adapter, NULL); - } - - if (probe) { - unsigned char addr; - printk("Probe: "); - for (addr = 0x00; addr <= 0x7f; addr++) { - if (i2c_smbus_xfer(&iface->adapter,addr, - 0,0,0,I2C_SMBUS_QUICK,NULL) >= 0) - printk("%02x ", addr); - } - printk("\n"); - } - - printk(KERN_INFO "SMU i2c bus %x registered\n", busid); - - return 0; -} - -static int dispose_iface(struct device *dev) -{ - struct smu_iface *iface = dev_get_drvdata(dev); - int rc; - - rc = i2c_del_adapter(&iface->adapter); - i2c_set_adapdata(&iface->adapter, NULL); - /* We aren't that prepared to deal with this... */ - if (rc) - printk("i2c-pmac-smu.c: Failed to remove bus %s !\n", - iface->adapter.name); - dev_set_drvdata(dev, NULL); - kfree(iface); - - return 0; -} - - -static int create_iface_of_platform(struct of_device* dev, - const struct of_device_id *match) -{ - return create_iface(dev->node, &dev->dev); -} - - -static int dispose_iface_of_platform(struct of_device* dev) -{ - return dispose_iface(&dev->dev); -} - - -static struct of_device_id i2c_smu_match[] = -{ - { - .compatible = "smu-i2c", - }, - {}, -}; -static struct of_platform_driver i2c_smu_of_platform_driver = -{ - .name = "i2c-smu", - .match_table = i2c_smu_match, - .probe = create_iface_of_platform, - .remove = dispose_iface_of_platform -}; - - -static int __init i2c_pmac_smu_init(void) -{ - of_register_driver(&i2c_smu_of_platform_driver); - return 0; -} - - -static void __exit i2c_pmac_smu_cleanup(void) -{ - of_unregister_driver(&i2c_smu_of_platform_driver); -} - -module_init(i2c_pmac_smu_init); -module_exit(i2c_pmac_smu_cleanup); diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c new file mode 100644 index 00000000000..df786eb5529 --- /dev/null +++ b/drivers/i2c/busses/i2c-powermac.c @@ -0,0 +1,290 @@ +/* + i2c Support for Apple SMU Controller + + Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp. + <benh@kernel.crashing.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <asm/prom.h> +#include <asm/pmac_low_i2c.h> + +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_DESCRIPTION("I2C driver for Apple PowerMac"); +MODULE_LICENSE("GPL"); + +/* + * SMBUS-type transfer entrypoint + */ +static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap, + u16 addr, + unsigned short flags, + char read_write, + u8 command, + int size, + union i2c_smbus_data* data) +{ + struct pmac_i2c_bus *bus = i2c_get_adapdata(adap); + int rc = 0; + int read = (read_write == I2C_SMBUS_READ); + int addrdir = (addr << 1) | read; + u8 local[2]; + + rc = pmac_i2c_open(bus, 0); + if (rc) + return rc; + + switch (size) { + case I2C_SMBUS_QUICK: + rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std); + if (rc) + goto bail; + rc = pmac_i2c_xfer(bus, addrdir, 0, 0, NULL, 0); + break; + case I2C_SMBUS_BYTE: + rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std); + if (rc) + goto bail; + rc = pmac_i2c_xfer(bus, addrdir, 0, 0, &data->byte, 1); + break; + case I2C_SMBUS_BYTE_DATA: + rc = pmac_i2c_setmode(bus, read ? + pmac_i2c_mode_combined : + pmac_i2c_mode_stdsub); + if (rc) + goto bail; + rc = pmac_i2c_xfer(bus, addrdir, 1, command, &data->byte, 1); + break; + case I2C_SMBUS_WORD_DATA: + rc = pmac_i2c_setmode(bus, read ? + pmac_i2c_mode_combined : + pmac_i2c_mode_stdsub); + if (rc) + goto bail; + if (!read) { + local[0] = data->word & 0xff; + local[1] = (data->word >> 8) & 0xff; + } + rc = pmac_i2c_xfer(bus, addrdir, 1, command, local, 2); + if (rc == 0 && read) { + data->word = ((u16)local[1]) << 8; + data->word |= local[0]; + } + break; + + /* Note that these are broken vs. the expected smbus API where + * on reads, the lenght is actually returned from the function, + * but I think the current API makes no sense and I don't want + * any driver that I haven't verified for correctness to go + * anywhere near a pmac i2c bus anyway ... + * + * I'm also not completely sure what kind of phases to do between + * the actual command and the data (what I am _supposed_ to do that + * is). For now, I assume writes are a single stream and reads have + * a repeat start/addr phase (but not stop in between) + */ + case I2C_SMBUS_BLOCK_DATA: + rc = pmac_i2c_setmode(bus, read ? + pmac_i2c_mode_combined : + pmac_i2c_mode_stdsub); + if (rc) + goto bail; + rc = pmac_i2c_xfer(bus, addrdir, 1, command, data->block, + data->block[0] + 1); + + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + rc = pmac_i2c_setmode(bus, read ? + pmac_i2c_mode_combined : + pmac_i2c_mode_stdsub); + if (rc) + goto bail; + rc = pmac_i2c_xfer(bus, addrdir, 1, command, + read ? data->block : &data->block[1], + data->block[0]); + break; + + default: + rc = -EINVAL; + } + bail: + pmac_i2c_close(bus); + return rc; +} + +/* + * Generic i2c master transfer entrypoint. This driver only support single + * messages (for "lame i2c" transfers). Anything else should use the smbus + * entry point + */ +static int i2c_powermac_master_xfer( struct i2c_adapter *adap, + struct i2c_msg *msgs, + int num) +{ + struct pmac_i2c_bus *bus = i2c_get_adapdata(adap); + int rc = 0; + int read; + int addrdir; + + if (num != 1) + return -EINVAL; + if (msgs->flags & I2C_M_TEN) + return -EINVAL; + read = (msgs->flags & I2C_M_RD) != 0; + addrdir = (msgs->addr << 1) | read; + if (msgs->flags & I2C_M_REV_DIR_ADDR) + addrdir ^= 1; + + rc = pmac_i2c_open(bus, 0); + if (rc) + return rc; + rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std); + if (rc) + goto bail; + rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len); + bail: + pmac_i2c_close(bus); + return rc < 0 ? rc : msgs->len; +} + +static u32 i2c_powermac_func(struct i2c_adapter * adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_I2C; +} + +/* For now, we only handle smbus */ +static struct i2c_algorithm i2c_powermac_algorithm = { + .smbus_xfer = i2c_powermac_smbus_xfer, + .master_xfer = i2c_powermac_master_xfer, + .functionality = i2c_powermac_func, +}; + + +static int i2c_powermac_remove(struct device *dev) +{ + struct i2c_adapter *adapter = dev_get_drvdata(dev); + struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter); + int rc; + + rc = i2c_del_adapter(adapter); + pmac_i2c_detach_adapter(bus, adapter); + i2c_set_adapdata(adapter, NULL); + /* We aren't that prepared to deal with this... */ + if (rc) + printk("i2c-powermac.c: Failed to remove bus %s !\n", + adapter->name); + dev_set_drvdata(dev, NULL); + kfree(adapter); + + return 0; +} + + +static int i2c_powermac_probe(struct device *dev) +{ + struct pmac_i2c_bus *bus = dev->platform_data; + struct device_node *parent = NULL; + struct i2c_adapter *adapter; + char name[32], *basename; + int rc; + + if (bus == NULL) + return -EINVAL; + + /* Ok, now we need to make up a name for the interface that will + * match what we used to do in the past, that is basically the + * controller's parent device node for keywest. PMU didn't have a + * naming convention and SMU has a different one + */ + switch(pmac_i2c_get_type(bus)) { + case pmac_i2c_bus_keywest: + parent = of_get_parent(pmac_i2c_get_controller(bus)); + if (parent == NULL) + return -EINVAL; + basename = parent->name; + break; + case pmac_i2c_bus_pmu: + basename = "pmu"; + break; + case pmac_i2c_bus_smu: + /* This is not what we used to do but I'm fixing drivers at + * the same time as this change + */ + basename = "smu"; + break; + default: + return -EINVAL; + } + snprintf(name, 32, "%s %d", basename, pmac_i2c_get_channel(bus)); + of_node_put(parent); + + adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); + if (adapter == NULL) { + printk(KERN_ERR "i2c-powermac: can't allocate inteface !\n"); + return -ENOMEM; + } + dev_set_drvdata(dev, adapter); + strcpy(adapter->name, name); + adapter->algo = &i2c_powermac_algorithm; + i2c_set_adapdata(adapter, bus); + adapter->dev.parent = dev; + pmac_i2c_attach_adapter(bus, adapter); + rc = i2c_add_adapter(adapter); + if (rc) { + printk(KERN_ERR "i2c-powermac: Adapter %s registration " + "failed\n", name); + i2c_set_adapdata(adapter, NULL); + pmac_i2c_detach_adapter(bus, adapter); + } + + printk(KERN_INFO "PowerMac i2c bus %s registered\n", name); + return rc; +} + + +static struct device_driver i2c_powermac_driver = { + .name = "i2c-powermac", + .bus = &platform_bus_type, + .probe = i2c_powermac_probe, + .remove = i2c_powermac_remove, +}; + +static int __init i2c_powermac_init(void) +{ + driver_register(&i2c_powermac_driver); + return 0; +} + + +static void __exit i2c_powermac_cleanup(void) +{ + driver_unregister(&i2c_powermac_driver); +} + +module_init(i2c_powermac_init); +module_exit(i2c_powermac_cleanup); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 16b28357885..5013b1285e2 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1271,7 +1271,7 @@ static int pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) { struct device_node *np = pmif->node; - int *bidp, i; + int *bidp; pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; @@ -1430,7 +1430,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) pmif = &pmac_ide[i]; hwif = &ide_hwifs[i]; - if (mdev->ofdev.node->n_addrs == 0) { + if (macio_resource_count(mdev) == 0) { printk(KERN_WARNING "ide%d: no address for %s\n", i, mdev->ofdev.node->full_name); return -ENXIO; @@ -1686,7 +1686,7 @@ pmac_ide_probe(void) #else macio_register_driver(&pmac_ide_macio_driver); pci_register_driver(&pmac_ide_pci_driver); -#endif +#endif } #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index a0ea44c3e8b..7d4a0ac28c0 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -149,14 +149,14 @@ config MAC_EMUMOUSEBTN config THERM_WINDTUNNEL tristate "Support for thermal management on Windtunnel G4s" - depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64 + depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 help This driver provides some thermostat and fan control for the desktop G4 "Windtunnel" config THERM_ADT746X tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" - depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64 + depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 help This driver provides some thermostat and fan control for the iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty @@ -164,7 +164,7 @@ config THERM_ADT746X config THERM_PM72 tristate "Support for thermal management on PowerMac G5" - depends on I2C && I2C_KEYWEST && PPC_PMAC64 + depends on I2C && I2C_POWERMAC && PPC_PMAC64 help This driver provides thermostat and fan control for the desktop G5 machines. @@ -175,14 +175,14 @@ config WINDFARM config WINDFARM_PM81 tristate "Support for thermal management on iMac G5" depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU - select I2C_PMAC_SMU + select I2C_POWERMAC help This driver provides thermal control for the iMacG5 config WINDFARM_PM91 tristate "Support for thermal management on PowerMac9,1" depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU - select I2C_PMAC_SMU + select I2C_POWERMAC help This driver provides thermal control for the PowerMac9,1 which is the recent (SMU based) single CPU desktop G5 diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index 228e1852a83..2a545ceb523 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -3,6 +3,13 @@ * a MacIO ASIC. Interface to new driver model mostly * stolen from the PCI version. * + * Copyright (C) 2005 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * * TODO: * * - Don't probe below media bay by default, but instead provide @@ -218,12 +225,14 @@ postcore_initcall(macio_bus_driver_init); /** - * macio_release_dev - free a macio device structure when all users of it are finished. + * macio_release_dev - free a macio device structure when all users of it are + * finished. * @dev: device that's been disconnected * - * Will be called only by the device core when all users of this macio device are - * done. This currently means never as we don't hot remove any macio device yet, - * though that will happen with mediabay based devices in a later implementation. + * Will be called only by the device core when all users of this macio device + * are done. This currently means never as we don't hot remove any macio + * device yet, though that will happen with mediabay based devices in a later + * implementation. */ static void macio_release_dev(struct device *dev) { @@ -242,49 +251,114 @@ static void macio_release_dev(struct device *dev) * If this routine returns non-null, then the resource is completely * skipped. */ -static int macio_resource_quirks(struct device_node *np, struct resource *res, int index) +static int macio_resource_quirks(struct device_node *np, struct resource *res, + int index) { if (res->flags & IORESOURCE_MEM) { /* Grand Central has too large resource 0 on some machines */ - if (index == 0 && !strcmp(np->name, "gc")) { - np->addrs[0].size = 0x20000; + if (index == 0 && !strcmp(np->name, "gc")) res->end = res->start + 0x1ffff; - } + /* Airport has bogus resource 2 */ if (index >= 2 && !strcmp(np->name, "radio")) return 1; + +#ifndef CONFIG_PPC64 /* DBDMAs may have bogus sizes */ - if ((res->start & 0x0001f000) == 0x00008000) { - np->addrs[index].size = 0x100; + if ((res->start & 0x0001f000) == 0x00008000) res->end = res->start + 0xff; - } - /* ESCC parent eats child resources. We could have added a level of hierarchy, - * but I don't really feel the need for it */ +#endif /* CONFIG_PPC64 */ + + /* ESCC parent eats child resources. We could have added a + * level of hierarchy, but I don't really feel the need + * for it + */ if (!strcmp(np->name, "escc")) return 1; + /* ESCC has bogus resources >= 3 */ - if (index >= 3 && !(strcmp(np->name, "ch-a") && strcmp(np->name, "ch-b"))) + if (index >= 3 && !(strcmp(np->name, "ch-a") && + strcmp(np->name, "ch-b"))) return 1; + /* Media bay has too many resources, keep only first one */ if (index > 0 && !strcmp(np->name, "media-bay")) return 1; + /* Some older IDE resources have bogus sizes */ if (!(strcmp(np->name, "IDE") && strcmp(np->name, "ATA") && strcmp(np->type, "ide") && strcmp(np->type, "ata"))) { - if (index == 0 && np->addrs[0].size > 0x1000) { - np->addrs[0].size = 0x1000; + if (index == 0 && (res->end - res->start) > 0xfff) res->end = res->start + 0xfff; - } - if (index == 1 && np->addrs[1].size > 0x100) { - np->addrs[1].size = 0x100; + if (index == 1 && (res->end - res->start) > 0xff) res->end = res->start + 0xff; - } } } return 0; } +static void macio_setup_interrupts(struct macio_dev *dev) +{ + struct device_node *np = dev->ofdev.node; + int i,j; + + /* For now, we use pre-parsed entries in the device-tree for + * interrupt routing and addresses, but we should change that + * to dynamically parsed entries and so get rid of most of the + * clutter in struct device_node + */ + for (i = j = 0; i < np->n_intrs; i++) { + struct resource *res = &dev->interrupt[j]; + + if (j >= MACIO_DEV_COUNT_IRQS) + break; + res->start = np->intrs[i].line; + res->flags = IORESOURCE_IO; + if (np->intrs[j].sense) + res->flags |= IORESOURCE_IRQ_LOWLEVEL; + else + res->flags |= IORESOURCE_IRQ_HIGHEDGE; + res->name = dev->ofdev.dev.bus_id; + if (macio_resource_quirks(np, res, i)) + memset(res, 0, sizeof(struct resource)); + else + j++; + } + dev->n_interrupts = j; +} + +static void macio_setup_resources(struct macio_dev *dev, + struct resource *parent_res) +{ + struct device_node *np = dev->ofdev.node; + struct resource r; + int index; + + for (index = 0; of_address_to_resource(np, index, &r) == 0; index++) { + struct resource *res = &dev->resource[index]; + if (index >= MACIO_DEV_COUNT_RESOURCES) + break; + *res = r; + res->name = dev->ofdev.dev.bus_id; + + if (macio_resource_quirks(np, res, index)) { + memset(res, 0, sizeof(struct resource)); + continue; + } + /* Currently, we consider failure as harmless, this may + * change in the future, once I've found all the device + * tree bugs in older machines & worked around them + */ + if (insert_resource(parent_res, res)) { + printk(KERN_WARNING "Can't request resource " + "%d for MacIO device %s\n", + index, dev->ofdev.dev.bus_id); + } + } + dev->n_resources = index; +} + /** * macio_add_one_device - Add one device from OF node to the device tree * @chip: pointer to the macio_chip holding the device @@ -294,12 +368,13 @@ static int macio_resource_quirks(struct device_node *np, struct resource *res, i * When media-bay is changed to hotswap drivers, this function will * be exposed to the bay driver some way... */ -static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct device *parent, - struct device_node *np, struct macio_dev *in_bay, +static struct macio_dev * macio_add_one_device(struct macio_chip *chip, + struct device *parent, + struct device_node *np, + struct macio_dev *in_bay, struct resource *parent_res) { struct macio_dev *dev; - int i, j; u32 *reg; if (np == NULL) @@ -326,7 +401,8 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d /* MacIO itself has a different reg, we use it's PCI base */ if (np == chip->of_node) { - sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s", chip->lbus.index, + sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s", + chip->lbus.index, #ifdef CONFIG_PCI pci_resource_start(chip->lbus.pdev, 0), #else @@ -335,57 +411,16 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d MAX_NODE_NAME_SIZE, np->name); } else { reg = (u32 *)get_property(np, "reg", NULL); - sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s", chip->lbus.index, + sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s", + chip->lbus.index, reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name); } - /* For now, we use pre-parsed entries in the device-tree for - * interrupt routing and addresses, but we should change that - * to dynamically parsed entries and so get rid of most of the - * clutter in struct device_node - */ - for (i = j = 0; i < np->n_intrs; i++) { - struct resource *res = &dev->interrupt[j]; - - if (j >= MACIO_DEV_COUNT_IRQS) - break; - res->start = np->intrs[i].line; - res->flags = IORESOURCE_IO; - if (np->intrs[j].sense) - res->flags |= IORESOURCE_IRQ_LOWLEVEL; - else - res->flags |= IORESOURCE_IRQ_HIGHEDGE; - res->name = dev->ofdev.dev.bus_id; - if (macio_resource_quirks(np, res, i)) - memset(res, 0, sizeof(struct resource)); - else - j++; - } - dev->n_interrupts = j; - for (i = j = 0; i < np->n_addrs; i++) { - struct resource *res = &dev->resource[j]; - - if (j >= MACIO_DEV_COUNT_RESOURCES) - break; - res->start = np->addrs[i].address; - res->end = np->addrs[i].address + np->addrs[i].size - 1; - res->flags = IORESOURCE_MEM; - res->name = dev->ofdev.dev.bus_id; - if (macio_resource_quirks(np, res, i)) - memset(res, 0, sizeof(struct resource)); - else { - j++; - /* Currently, we consider failure as harmless, this may - * change in the future, once I've found all the device - * tree bugs in older machines & worked around them - */ - if (insert_resource(parent_res, res)) - printk(KERN_WARNING "Can't request resource %d for MacIO" - " device %s\n", i, dev->ofdev.dev.bus_id); - } - } - dev->n_resources = j; + /* Setup interrupts & resources */ + macio_setup_interrupts(dev); + macio_setup_resources(dev, parent_res); + /* Register with core */ if (of_device_register(&dev->ofdev) != 0) { printk(KERN_DEBUG"macio: device registration error for %s!\n", dev->ofdev.dev.bus_id); @@ -442,36 +477,42 @@ static void macio_pci_add_devices(struct macio_chip *chip) /* First scan 1st level */ for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) { - if (!macio_skip_device(np)) { - of_node_get(np); - mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL, root_res); - if (mdev == NULL) - of_node_put(np); - else if (strncmp(np->name, "media-bay", 9) == 0) - mbdev = mdev; - else if (strncmp(np->name, "escc", 4) == 0) - sdev = mdev; - } + if (macio_skip_device(np)) + continue; + of_node_get(np); + mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL, + root_res); + if (mdev == NULL) + of_node_put(np); + else if (strncmp(np->name, "media-bay", 9) == 0) + mbdev = mdev; + else if (strncmp(np->name, "escc", 4) == 0) + sdev = mdev; } /* Add media bay devices if any */ if (mbdev) - for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np)) != NULL;) - if (!macio_skip_device(np)) { - of_node_get(np); - if (macio_add_one_device(chip, &mbdev->ofdev.dev, np, mbdev, - root_res) == NULL) - of_node_put(np); - } + for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np)) + != NULL;) { + if (macio_skip_device(np)) + continue; + of_node_get(np); + if (macio_add_one_device(chip, &mbdev->ofdev.dev, np, + mbdev, root_res) == NULL) + of_node_put(np); + } + /* Add serial ports if any */ if (sdev) { - for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np)) != NULL;) - if (!macio_skip_device(np)) { - of_node_get(np); - if (macio_add_one_device(chip, &sdev->ofdev.dev, np, NULL, - root_res) == NULL) - of_node_put(np); - } + for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np)) + != NULL;) { + if (macio_skip_device(np)) + continue; + of_node_get(np); + if (macio_add_one_device(chip, &sdev->ofdev.dev, np, + NULL, root_res) == NULL) + of_node_put(np); + } } } @@ -519,7 +560,8 @@ void macio_unregister_driver(struct macio_driver *drv) * Returns 0 on success, or %EBUSY on error. A warning * message is also printed on failure. */ -int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name) +int macio_request_resource(struct macio_dev *dev, int resource_no, + const char *name) { if (macio_resource_len(dev, resource_no) == 0) return 0; @@ -606,20 +648,20 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi if (ent->vendor != PCI_VENDOR_ID_APPLE) return -ENODEV; - /* Note regarding refcounting: We assume pci_device_to_OF_node() is ported - * to new OF APIs and returns a node with refcount incremented. This isn't - * the case today, but on the other hand ppc32 doesn't do refcounting. This - * will have to be fixed when going to ppc64. --BenH. + /* Note regarding refcounting: We assume pci_device_to_OF_node() is + * ported to new OF APIs and returns a node with refcount incremented. */ np = pci_device_to_OF_node(pdev); if (np == NULL) return -ENODEV; - /* This assumption is wrong, fix that here for now until I fix the arch */ + /* The above assumption is wrong !!! + * fix that here for now until I fix the arch code + */ of_node_get(np); - /* We also assume that pmac_feature will have done a get() on nodes stored - * in the macio chips array + /* We also assume that pmac_feature will have done a get() on nodes + * stored in the macio chips array */ chip = macio_find(np, macio_unknown); of_node_put(np); @@ -639,9 +681,9 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi /* * HACK ALERT: The WallStreet PowerBook and some OHare based machines - * have 2 macio ASICs. I must probe the "main" one first or IDE ordering - * will be incorrect. So I put on "hold" the second one since it seem to - * appear first on PCI + * have 2 macio ASICs. I must probe the "main" one first or IDE + * ordering will be incorrect. So I put on "hold" the second one since + * it seem to appear first on PCI */ if (chip->type == macio_gatwick || chip->type == macio_ohareII) if (macio_chips[0].lbus.pdev == NULL) { diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index b856bb67169..8dbf2852bae 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -647,6 +647,7 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de struct media_bay_info* bay; u32 __iomem *regbase; struct device_node *ofnode; + unsigned long base; int i; ofnode = mdev->ofdev.node; @@ -656,10 +657,11 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de if (macio_request_resources(mdev, "media-bay")) return -EBUSY; /* Media bay registers are located at the beginning of the - * mac-io chip, we get the parent address for now (hrm...) + * mac-io chip, for now, we trick and align down the first + * resource passed in */ - regbase = (u32 __iomem *) - ioremap(ofnode->parent->addrs[0].address, 0x100); + base = macio_resource_start(mdev, 0) & 0xffff0000u; + regbase = (u32 __iomem *)ioremap(base, 0x100); if (regbase == NULL) { macio_release_resources(mdev); return -ENOMEM; diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index e8378274d71..db2ae71d07e 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -53,7 +53,7 @@ #undef DEBUG_SMU #ifdef DEBUG_SMU -#define DPRINTK(fmt, args...) do { udbg_printf(KERN_DEBUG fmt , ##args); } while (0) +#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0) #else #define DPRINTK(fmt, args...) do { } while (0) #endif @@ -94,6 +94,8 @@ struct smu_device { static struct smu_device *smu; static DECLARE_MUTEX(smu_part_access); +static void smu_i2c_retry(unsigned long data); + /* * SMU driver low level stuff */ @@ -469,7 +471,6 @@ int __init smu_init (void) smu->of_node = np; smu->db_irq = NO_IRQ; smu->msg_irq = NO_IRQ; - init_timer(&smu->i2c_timer); /* smu_cmdbuf_abs is in the low 2G of RAM, can be converted to a * 32 bits value safely @@ -544,6 +545,10 @@ static int smu_late_init(void) if (!smu) return 0; + init_timer(&smu->i2c_timer); + smu->i2c_timer.function = smu_i2c_retry; + smu->i2c_timer.data = (unsigned long)smu; + /* * Try to request the interrupts */ @@ -570,7 +575,10 @@ static int smu_late_init(void) return 0; } -arch_initcall(smu_late_init); +/* This has to be before arch_initcall as the low i2c stuff relies on the + * above having been done before we reach arch_initcalls + */ +core_initcall(smu_late_init); /* * sysfs visibility @@ -580,20 +588,10 @@ static void smu_expose_childs(void *unused) { struct device_node *np; - for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) { - if (device_is_compatible(np, "smu-i2c")) { - char name[32]; - u32 *reg = (u32 *)get_property(np, "reg", NULL); - - if (reg == NULL) - continue; - sprintf(name, "smu-i2c-%02x", *reg); - of_platform_device_create(np, name, &smu->of_dev->dev); - } + for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) if (device_is_compatible(np, "smu-sensors")) - of_platform_device_create(np, "smu-sensors", &smu->of_dev->dev); - } - + of_platform_device_create(np, "smu-sensors", + &smu->of_dev->dev); } static DECLARE_WORK(smu_expose_childs_work, smu_expose_childs, NULL); @@ -712,13 +710,13 @@ static void smu_i2c_complete_command(struct smu_i2c_cmd *cmd, int fail) static void smu_i2c_retry(unsigned long data) { - struct smu_i2c_cmd *cmd = (struct smu_i2c_cmd *)data; + struct smu_i2c_cmd *cmd = smu->cmd_i2c_cur; DPRINTK("SMU: i2c failure, requeuing...\n"); /* requeue command simply by resetting reply_len */ cmd->pdata[0] = 0xff; - cmd->scmd.reply_len = 0x10; + cmd->scmd.reply_len = sizeof(cmd->pdata); smu_queue_cmd(&cmd->scmd); } @@ -747,10 +745,8 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc) */ if (fail && --cmd->retries > 0) { DPRINTK("SMU: i2c failure, starting timer...\n"); - smu->i2c_timer.function = smu_i2c_retry; - smu->i2c_timer.data = (unsigned long)cmd; - smu->i2c_timer.expires = jiffies + msecs_to_jiffies(5); - add_timer(&smu->i2c_timer); + BUG_ON(cmd != smu->cmd_i2c_cur); + mod_timer(&smu->i2c_timer, jiffies + msecs_to_jiffies(5)); return; } @@ -764,7 +760,7 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc) /* Ok, initial command complete, now poll status */ scmd->reply_buf = cmd->pdata; - scmd->reply_len = 0x10; + scmd->reply_len = sizeof(cmd->pdata); scmd->data_buf = cmd->pdata; scmd->data_len = 1; cmd->pdata[0] = 0; @@ -786,7 +782,7 @@ int smu_queue_i2c(struct smu_i2c_cmd *cmd) cmd->scmd.done = smu_i2c_low_completion; cmd->scmd.misc = cmd; cmd->scmd.reply_buf = cmd->pdata; - cmd->scmd.reply_len = 0x10; + cmd->scmd.reply_len = sizeof(cmd->pdata); cmd->scmd.data_buf = (u8 *)(char *)&cmd->info; cmd->scmd.status = 1; cmd->stage = 0; @@ -909,10 +905,13 @@ static struct smu_sdbp_header *smu_create_sdb_partition(int id) struct property *prop; /* First query the partition info */ + DPRINTK("SMU: Query partition infos ... (irq=%d)\n", smu->db_irq); smu_queue_simple(&cmd, SMU_CMD_PARTITION_COMMAND, 2, smu_done_complete, &comp, SMU_CMD_PARTITION_LATEST, id); wait_for_completion(&comp); + DPRINTK("SMU: done, status: %d, reply_len: %d\n", + cmd.cmd.status, cmd.cmd.reply_len); /* Partition doesn't exist (or other error) */ if (cmd.cmd.status != 0 || cmd.cmd.reply_len != 6) @@ -975,6 +974,8 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size, sprintf(pname, "sdb-partition-%02x", id); + DPRINTK("smu_get_sdb_partition(%02x)\n", id); + if (interruptible) { int rc; rc = down_interruptible(&smu_part_access); @@ -986,6 +987,7 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size, part = (struct smu_sdbp_header *)get_property(smu->of_node, pname, size); if (part == NULL) { + DPRINTK("trying to extract from SMU ...\n"); part = smu_create_sdb_partition(id); if (part != NULL && size) *size = part->len << 2; diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c index d843a6c9c6d..2d9d7915040 100644 --- a/drivers/macintosh/via-cuda.c +++ b/drivers/macintosh/via-cuda.c @@ -127,39 +127,34 @@ struct adb_driver via_cuda_driver = { #endif /* CONFIG_ADB */ #ifdef CONFIG_PPC -int __init -find_via_cuda(void) +int __init find_via_cuda(void) { - int err; struct adb_request req; + phys_addr_t taddr; + u32 *reg; + int err; if (vias != 0) return 1; - vias = find_devices("via-cuda"); + vias = of_find_node_by_name(NULL, "via-cuda"); if (vias == 0) return 0; - if (vias->next != 0) - printk(KERN_WARNING "Warning: only using 1st via-cuda\n"); - -#if 0 - { int i; - - printk("find_via_cuda: node = %p, addrs =", vias->node); - for (i = 0; i < vias->n_addrs; ++i) - printk(" %x(%x)", vias->addrs[i].address, vias->addrs[i].size); - printk(", intrs ="); - for (i = 0; i < vias->n_intrs; ++i) - printk(" %x", vias->intrs[i].line); - printk("\n"); } -#endif - if (vias->n_addrs != 1 || vias->n_intrs != 1) { - printk(KERN_ERR "via-cuda: expecting 1 address (%d) and 1 interrupt (%d)\n", - vias->n_addrs, vias->n_intrs); - if (vias->n_addrs < 1 || vias->n_intrs < 1) - return 0; + reg = (u32 *)get_property(vias, "reg", NULL); + if (reg == NULL) { + printk(KERN_ERR "via-cuda: No \"reg\" property !\n"); + goto fail; + } + taddr = of_translate_address(vias, reg); + if (taddr == 0) { + printk(KERN_ERR "via-cuda: Can't translate address !\n"); + goto fail; + } + via = ioremap(taddr, 0x2000); + if (via == NULL) { + printk(KERN_ERR "via-cuda: Can't map address !\n"); + goto fail; } - via = ioremap(vias->addrs->address, 0x2000); cuda_state = idle; sys_ctrler = SYS_CTRLER_CUDA; @@ -185,6 +180,11 @@ find_via_cuda(void) cuda_poll(); return 1; + + fail: + of_node_put(vias); + vias = NULL; + return 0; } #endif /* CONFIG_PPC */ @@ -193,10 +193,6 @@ static int __init via_cuda_start(void) if (via == NULL) return -ENODEV; -#ifdef CONFIG_PPC - request_OF_resource(vias, 0, NULL); -#endif - if (request_irq(CUDA_IRQ, cuda_interrupt, 0, "ADB", cuda_interrupt)) { printk(KERN_ERR "cuda_init: can't get irq %d\n", CUDA_IRQ); return -EAGAIN; diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 56404350856..6eb93e45fcd 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -55,6 +55,8 @@ #include <asm/sections.h> #include <asm/irq.h> #include <asm/pmac_feature.h> +#include <asm/pmac_pfunc.h> +#include <asm/pmac_low_i2c.h> #include <asm/uaccess.h> #include <asm/mmu_context.h> #include <asm/cputable.h> @@ -147,6 +149,7 @@ static struct device_node *vias; static int pmu_kind = PMU_UNKNOWN; static int pmu_fully_inited = 0; static int pmu_has_adb; +static struct device_node *gpio_node; static unsigned char __iomem *gpio_reg = NULL; static int gpio_irq = -1; static int gpio_irq_enabled = -1; @@ -157,8 +160,8 @@ static int pmu_version; static int drop_interrupts; #if defined(CONFIG_PM) && defined(CONFIG_PPC32) static int option_lid_wakeup = 1; -static int sleep_in_progress; #endif /* CONFIG_PM && CONFIG_PPC32 */ +static int sleep_in_progress; static unsigned long async_req_locks; static unsigned int pmu_irq_stats[11]; @@ -196,7 +199,6 @@ static int pmu_adb_reset_bus(void); #endif /* CONFIG_ADB */ static int init_pmu(void); -static int pmu_queue_request(struct adb_request *req); static void pmu_start(void); static irqreturn_t via_pmu_interrupt(int irq, void *arg, struct pt_regs *regs); static irqreturn_t gpio1_interrupt(int irq, void *arg, struct pt_regs *regs); @@ -295,22 +297,26 @@ static struct backlight_controller pmu_backlight_controller = { }; #endif /* CONFIG_PMAC_BACKLIGHT */ -int -find_via_pmu(void) +int __init find_via_pmu(void) { + u64 taddr; + u32 *reg; + if (via != 0) return 1; - vias = find_devices("via-pmu"); - if (vias == 0) + vias = of_find_node_by_name(NULL, "via-pmu"); + if (vias == NULL) return 0; - if (vias->next != 0) - printk(KERN_WARNING "Warning: only using 1st via-pmu\n"); - if (vias->n_addrs < 1 || vias->n_intrs < 1) { - printk(KERN_ERR "via-pmu: %d addresses, %d interrupts!\n", - vias->n_addrs, vias->n_intrs); - if (vias->n_addrs < 1 || vias->n_intrs < 1) - return 0; + reg = (u32 *)get_property(vias, "reg", NULL); + if (reg == NULL) { + printk(KERN_ERR "via-pmu: No \"reg\" property !\n"); + goto fail; + } + taddr = of_translate_address(vias, reg); + if (taddr == OF_BAD_ADDR) { + printk(KERN_ERR "via-pmu: Can't translate address !\n"); + goto fail; } spin_lock_init(&pmu_lock); @@ -331,7 +337,8 @@ find_via_pmu(void) pmu_kind = PMU_HEATHROW_BASED; else if (device_is_compatible(vias->parent, "Keylargo") || device_is_compatible(vias->parent, "K2-Keylargo")) { - struct device_node *gpio, *gpiop; + struct device_node *gpiop; + u64 gaddr = OF_BAD_ADDR; pmu_kind = PMU_KEYLARGO_BASED; pmu_has_adb = (find_type_devices("adb") != NULL); @@ -341,19 +348,24 @@ find_via_pmu(void) PMU_INT_TICK | PMU_INT_ENVIRONMENT; - gpiop = find_devices("gpio"); - if (gpiop && gpiop->n_addrs) { - gpio_reg = ioremap(gpiop->addrs->address, 0x10); - gpio = find_devices("extint-gpio1"); - if (gpio == NULL) - gpio = find_devices("pmu-interrupt"); - if (gpio && gpio->parent == gpiop && gpio->n_intrs) - gpio_irq = gpio->intrs[0].line; + gpiop = of_find_node_by_name(NULL, "gpio"); + if (gpiop) { + reg = (u32 *)get_property(gpiop, "reg", NULL); + if (reg) + gaddr = of_translate_address(gpiop, reg); + if (gaddr != OF_BAD_ADDR) + gpio_reg = ioremap(gaddr, 0x10); } + if (gpio_reg == NULL) + printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n"); } else pmu_kind = PMU_UNKNOWN; - via = ioremap(vias->addrs->address, 0x2000); + via = ioremap(taddr, 0x2000); + if (via == NULL) { + printk(KERN_ERR "via-pmu: Can't map address !\n"); + goto fail; + } out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */ out_8(&via[IFR], 0x7f); /* clear IFR */ @@ -365,23 +377,25 @@ find_via_pmu(void) return 0; } - printk(KERN_INFO "PMU driver %d initialized for %s, firmware: %02x\n", + printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n", PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version); sys_ctrler = SYS_CTRLER_PMU; return 1; + fail: + of_node_put(vias); + vias = NULL; + return 0; } #ifdef CONFIG_ADB -static int -pmu_probe(void) +static int pmu_probe(void) { return vias == NULL? -ENODEV: 0; } -static int __init -pmu_init(void) +static int __init pmu_init(void) { if (vias == NULL) return -ENODEV; @@ -405,7 +419,7 @@ static int __init via_pmu_start(void) bright_req_2.complete = 1; batt_req.complete = 1; -#if defined(CONFIG_PPC32) && !defined(CONFIG_PPC_MERGE) +#ifndef CONFIG_PPC_MERGE if (pmu_kind == PMU_KEYLARGO_BASED) openpic_set_irq_priority(vias->intrs[0].line, OPENPIC_PRIORITY_DEFAULT + 1); @@ -418,10 +432,22 @@ static int __init via_pmu_start(void) return -EAGAIN; } - if (pmu_kind == PMU_KEYLARGO_BASED && gpio_irq != -1) { - if (request_irq(gpio_irq, gpio1_interrupt, 0, "GPIO1 ADB", (void *)0)) - printk(KERN_ERR "pmu: can't get irq %d (GPIO1)\n", gpio_irq); - gpio_irq_enabled = 1; + if (pmu_kind == PMU_KEYLARGO_BASED) { + gpio_node = of_find_node_by_name(NULL, "extint-gpio1"); + if (gpio_node == NULL) + gpio_node = of_find_node_by_name(NULL, + "pmu-interrupt"); + if (gpio_node && gpio_node->n_intrs > 0) + gpio_irq = gpio_node->intrs[0].line; + + if (gpio_irq != -1) { + if (request_irq(gpio_irq, gpio1_interrupt, 0, + "GPIO1 ADB", (void *)0)) + printk(KERN_ERR "pmu: can't get irq %d" + " (GPIO1)\n", gpio_irq); + else + gpio_irq_enabled = 1; + } } /* Enable interrupts */ @@ -454,9 +480,6 @@ static int __init via_pmu_dev_init(void) if (vias == NULL) return -ENODEV; -#ifndef CONFIG_PPC64 - request_OF_resource(vias, 0, NULL); -#endif #ifdef CONFIG_PMAC_BACKLIGHT /* Enable backlight */ register_backlight_controller(&pmu_backlight_controller, NULL, "pmu"); @@ -1371,7 +1394,6 @@ next: } pmu_done(req); } else { -#if defined(CONFIG_XMON) && !defined(CONFIG_PPC64) if (len == 4 && data[1] == 0x2c) { extern int xmon_wants_key, xmon_adb_keycode; if (xmon_wants_key) { @@ -1379,7 +1401,6 @@ next: return; } } -#endif /* defined(CONFIG_XMON) && !defined(CONFIG_PPC64) */ #ifdef CONFIG_ADB /* * XXX On the [23]400 the PMU gives us an up @@ -1782,258 +1803,6 @@ pmu_present(void) return via != 0; } -struct pmu_i2c_hdr { - u8 bus; - u8 mode; - u8 bus2; - u8 address; - u8 sub_addr; - u8 comb_addr; - u8 count; -}; - -int -pmu_i2c_combined_read(int bus, int addr, int subaddr, u8* data, int len) -{ - struct adb_request req; - struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1]; - int retry; - int rc; - - for (retry=0; retry<16; retry++) { - memset(&req, 0, sizeof(req)); - - hdr->bus = bus; - hdr->address = addr & 0xfe; - hdr->mode = PMU_I2C_MODE_COMBINED; - hdr->bus2 = 0; - hdr->sub_addr = subaddr; - hdr->comb_addr = addr | 1; - hdr->count = len; - - req.nbytes = sizeof(struct pmu_i2c_hdr) + 1; - req.reply_expected = 0; - req.reply_len = 0; - req.data[0] = PMU_I2C_CMD; - req.reply[0] = 0xff; - rc = pmu_queue_request(&req); - if (rc) - return rc; - while(!req.complete) - pmu_poll(); - if (req.reply[0] == PMU_I2C_STATUS_OK) - break; - mdelay(15); - } - if (req.reply[0] != PMU_I2C_STATUS_OK) - return -1; - - for (retry=0; retry<16; retry++) { - memset(&req, 0, sizeof(req)); - - mdelay(15); - - hdr->bus = PMU_I2C_BUS_STATUS; - req.reply[0] = 0xff; - - req.nbytes = 2; - req.reply_expected = 0; - req.reply_len = 0; - req.data[0] = PMU_I2C_CMD; - rc = pmu_queue_request(&req); - if (rc) - return rc; - while(!req.complete) - pmu_poll(); - if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) { - memcpy(data, &req.reply[1], req.reply_len - 1); - return req.reply_len - 1; - } - } - return -1; -} - -int -pmu_i2c_stdsub_write(int bus, int addr, int subaddr, u8* data, int len) -{ - struct adb_request req; - struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1]; - int retry; - int rc; - - for (retry=0; retry<16; retry++) { - memset(&req, 0, sizeof(req)); - - hdr->bus = bus; - hdr->address = addr & 0xfe; - hdr->mode = PMU_I2C_MODE_STDSUB; - hdr->bus2 = 0; - hdr->sub_addr = subaddr; - hdr->comb_addr = addr & 0xfe; - hdr->count = len; - - req.data[0] = PMU_I2C_CMD; - memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len); - req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1; - req.reply_expected = 0; - req.reply_len = 0; - req.reply[0] = 0xff; - rc = pmu_queue_request(&req); - if (rc) - return rc; - while(!req.complete) - pmu_poll(); - if (req.reply[0] == PMU_I2C_STATUS_OK) - break; - mdelay(15); - } - if (req.reply[0] != PMU_I2C_STATUS_OK) - return -1; - - for (retry=0; retry<16; retry++) { - memset(&req, 0, sizeof(req)); - - mdelay(15); - - hdr->bus = PMU_I2C_BUS_STATUS; - req.reply[0] = 0xff; - - req.nbytes = 2; - req.reply_expected = 0; - req.reply_len = 0; - req.data[0] = PMU_I2C_CMD; - rc = pmu_queue_request(&req); - if (rc) - return rc; - while(!req.complete) - pmu_poll(); - if (req.reply[0] == PMU_I2C_STATUS_OK) - return len; - } - return -1; -} - -int -pmu_i2c_simple_read(int bus, int addr, u8* data, int len) -{ - struct adb_request req; - struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1]; - int retry; - int rc; - - for (retry=0; retry<16; retry++) { - memset(&req, 0, sizeof(req)); - - hdr->bus = bus; - hdr->address = addr | 1; - hdr->mode = PMU_I2C_MODE_SIMPLE; - hdr->bus2 = 0; - hdr->sub_addr = 0; - hdr->comb_addr = 0; - hdr->count = len; - - req.data[0] = PMU_I2C_CMD; - req.nbytes = sizeof(struct pmu_i2c_hdr) + 1; - req.reply_expected = 0; - req.reply_len = 0; - req.reply[0] = 0xff; - rc = pmu_queue_request(&req); - if (rc) - return rc; - while(!req.complete) - pmu_poll(); - if (req.reply[0] == PMU_I2C_STATUS_OK) - break; - mdelay(15); - } - if (req.reply[0] != PMU_I2C_STATUS_OK) - return -1; - - for (retry=0; retry<16; retry++) { - memset(&req, 0, sizeof(req)); - - mdelay(15); - - hdr->bus = PMU_I2C_BUS_STATUS; - req.reply[0] = 0xff; - - req.nbytes = 2; - req.reply_expected = 0; - req.reply_len = 0; - req.data[0] = PMU_I2C_CMD; - rc = pmu_queue_request(&req); - if (rc) - return rc; - while(!req.complete) - pmu_poll(); - if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) { - memcpy(data, &req.reply[1], req.reply_len - 1); - return req.reply_len - 1; - } - } - return -1; -} - -int -pmu_i2c_simple_write(int bus, int addr, u8* data, int len) -{ - struct adb_request req; - struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1]; - int retry; - int rc; - - for (retry=0; retry<16; retry++) { - memset(&req, 0, sizeof(req)); - - hdr->bus = bus; - hdr->address = addr & 0xfe; - hdr->mode = PMU_I2C_MODE_SIMPLE; - hdr->bus2 = 0; - hdr->sub_addr = 0; - hdr->comb_addr = 0; - hdr->count = len; - - req.data[0] = PMU_I2C_CMD; - memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len); - req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1; - req.reply_expected = 0; - req.reply_len = 0; - req.reply[0] = 0xff; - rc = pmu_queue_request(&req); - if (rc) - return rc; - while(!req.complete) - pmu_poll(); - if (req.reply[0] == PMU_I2C_STATUS_OK) - break; - mdelay(15); - } - if (req.reply[0] != PMU_I2C_STATUS_OK) - return -1; - - for (retry=0; retry<16; retry++) { - memset(&req, 0, sizeof(req)); - - mdelay(15); - - hdr->bus = PMU_I2C_BUS_STATUS; - req.reply[0] = 0xff; - - req.nbytes = 2; - req.reply_expected = 0; - req.reply_len = 0; - req.data[0] = PMU_I2C_CMD; - rc = pmu_queue_request(&req); - if (rc) - return rc; - while(!req.complete) - pmu_poll(); - if (req.reply[0] == PMU_I2C_STATUS_OK) - return len; - } - return -1; -} - #ifdef CONFIG_PM static LIST_HEAD(sleep_notifiers); @@ -2338,8 +2107,9 @@ pmac_suspend_devices(void) return -EBUSY; } - /* Disable clock spreading on some machines */ - pmac_tweak_clock_spreading(0); + /* Call platform functions marked "on sleep" */ + pmac_pfunc_i2c_suspend(); + pmac_pfunc_base_suspend(); /* Stop preemption */ preempt_disable(); @@ -2411,8 +2181,9 @@ pmac_wakeup_devices(void) mdelay(10); preempt_enable(); - /* Re-enable clock spreading on some machines */ - pmac_tweak_clock_spreading(1); + /* Call platform functions marked "on wake" */ + pmac_pfunc_base_resume(); + pmac_pfunc_i2c_resume(); /* Resume devices */ device_resume(); @@ -3130,16 +2901,13 @@ static int __init init_pmu_sysfs(void) subsys_initcall(init_pmu_sysfs); EXPORT_SYMBOL(pmu_request); +EXPORT_SYMBOL(pmu_queue_request); EXPORT_SYMBOL(pmu_poll); EXPORT_SYMBOL(pmu_poll_adb); EXPORT_SYMBOL(pmu_wait_complete); EXPORT_SYMBOL(pmu_suspend); EXPORT_SYMBOL(pmu_resume); EXPORT_SYMBOL(pmu_unlock); -EXPORT_SYMBOL(pmu_i2c_combined_read); -EXPORT_SYMBOL(pmu_i2c_stdsub_write); -EXPORT_SYMBOL(pmu_i2c_simple_read); -EXPORT_SYMBOL(pmu_i2c_simple_write); #if defined(CONFIG_PM) && defined(CONFIG_PPC32) EXPORT_SYMBOL(pmu_enable_irled); EXPORT_SYMBOL(pmu_battery_count); diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c index 57460e46c89..906d3ecae6e 100644 --- a/drivers/macintosh/windfarm_lm75_sensor.c +++ b/drivers/macintosh/windfarm_lm75_sensor.c @@ -21,6 +21,7 @@ #include <asm/io.h> #include <asm/system.h> #include <asm/sections.h> +#include <asm/pmac_low_i2c.h> #include "windfarm.h" @@ -157,53 +158,21 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter, static int wf_lm75_attach(struct i2c_adapter *adapter) { - u8 bus_id; - struct device_node *smu, *bus, *dev; - - /* We currently only deal with LM75's hanging off the SMU - * i2c busses. If we extend that driver to other/older - * machines, we should split this function into SMU-i2c, - * keywest-i2c, PMU-i2c, ... - */ + struct device_node *busnode, *dev; + struct pmac_i2c_bus *bus; DBG("wf_lm75: adapter %s detected\n", adapter->name); - if (strncmp(adapter->name, "smu-i2c-", 8) != 0) - return 0; - smu = of_find_node_by_type(NULL, "smu"); - if (smu == NULL) - return 0; - - /* Look for the bus in the device-tree */ - bus_id = (u8)simple_strtoul(adapter->name + 8, NULL, 16); - - DBG("wf_lm75: bus ID is %x\n", bus_id); - - /* Look for sensors subdir */ - for (bus = NULL; - (bus = of_get_next_child(smu, bus)) != NULL;) { - u32 *reg; - - if (strcmp(bus->name, "i2c")) - continue; - reg = (u32 *)get_property(bus, "reg", NULL); - if (reg == NULL) - continue; - if (bus_id == *reg) - break; - } - of_node_put(smu); - if (bus == NULL) { - printk(KERN_WARNING "windfarm: SMU i2c bus 0x%x not found" - " in device-tree !\n", bus_id); - return 0; - } + bus = pmac_i2c_adapter_to_bus(adapter); + if (bus == NULL) + return -ENODEV; + busnode = pmac_i2c_get_bus_node(bus); DBG("wf_lm75: bus found, looking for device...\n"); /* Now look for lm75(s) in there */ for (dev = NULL; - (dev = of_get_next_child(bus, dev)) != NULL;) { + (dev = of_get_next_child(busnode, dev)) != NULL;) { const char *loc = get_property(dev, "hwsensor-location", NULL); u32 *reg = (u32 *)get_property(dev, "reg", NULL); @@ -217,9 +186,6 @@ static int wf_lm75_attach(struct i2c_adapter *adapter) else if (device_is_compatible(dev, "ds1775")) wf_lm75_create(adapter, *reg, 1, loc); } - - of_node_put(bus); - return 0; } diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c index 932dcf0366e..311a4122bd7 100644 --- a/drivers/scsi/mac53c94.c +++ b/drivers/scsi/mac53c94.c @@ -432,11 +432,12 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat struct Scsi_Host *host; void *dma_cmd_space; unsigned char *clkprop; - int proplen; + int proplen, rc = -ENODEV; if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) { - printk(KERN_ERR "mac53c94: expected 2 addrs and intrs (got %d/%d)\n", - node->n_addrs, node->n_intrs); + printk(KERN_ERR "mac53c94: expected 2 addrs and intrs" + " (got %d/%d)\n", + macio_resource_count(mdev), macio_irq_count(mdev)); return -ENODEV; } @@ -448,6 +449,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat host = scsi_host_alloc(&mac53c94_template, sizeof(struct fsc_state)); if (host == NULL) { printk(KERN_ERR "mac53c94: couldn't register host"); + rc = -ENOMEM; goto out_release; } @@ -486,6 +488,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat if (dma_cmd_space == 0) { printk(KERN_ERR "mac53c94: couldn't allocate dma " "command space for %s\n", node->full_name); + rc = -ENOMEM; goto out_free; } state->dma_cmds = (struct dbdma_cmd *)DBDMA_ALIGN(dma_cmd_space); @@ -495,18 +498,21 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat mac53c94_init(state); - if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94", state)) { + if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94",state)) { printk(KERN_ERR "mac53C94: can't get irq %d for %s\n", state->intr, node->full_name); goto out_free_dma; } - /* XXX FIXME: handle failure */ - scsi_add_host(host, &mdev->ofdev.dev); - scsi_scan_host(host); + rc = scsi_add_host(host, &mdev->ofdev.dev); + if (rc != 0) + goto out_release_irq; + scsi_scan_host(host); return 0; + out_release_irq: + free_irq(state->intr, state); out_free_dma: kfree(state->dma_cmd_space); out_free: @@ -518,7 +524,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat out_release: macio_release_resources(mdev); - return -ENODEV; + return rc; } static int mac53c94_remove(struct macio_dev *mdev) diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c index bdccf73cf9f..d6d2125f904 100644 --- a/drivers/scsi/mesh.c +++ b/drivers/scsi/mesh.c @@ -1869,7 +1869,8 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match) if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) { printk(KERN_ERR "mesh: expected 2 addrs and 2 intrs" - " (got %d,%d)\n", mesh->n_addrs, mesh->n_intrs); + " (got %d,%d)\n", macio_resource_count(mdev), + macio_irq_count(mdev)); return -ENODEV; } diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 987d22b53c2..16af5626c24 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -608,7 +608,7 @@ static int cpm_uart_tx_pump(struct uart_port *port) p = cpm2cpu_addr(bdp->cbd_bufaddr); - *p++ = xmit->buf[xmit->tail]; + *p++ = port->x_char; bdp->cbd_datlen = 1; bdp->cbd_sc |= BD_SC_READY; /* Get next BD. */ diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 5ddd8ab1f10..ea24129eb6b 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -1431,11 +1431,14 @@ static int __init pmz_init_port(struct uart_pmac_port *uap) char name[1]; } *slots; int len; + struct resource r_ports, r_rxdma, r_txdma; /* * Request & map chip registers */ - uap->port.mapbase = np->addrs[0].address; + if (of_address_to_resource(np, 0, &r_ports)) + return -ENODEV; + uap->port.mapbase = r_ports.start; uap->port.membase = ioremap(uap->port.mapbase, 0x1000); uap->control_reg = uap->port.membase; @@ -1445,16 +1448,20 @@ static int __init pmz_init_port(struct uart_pmac_port *uap) * Request & map DBDMA registers */ #ifdef HAS_DBDMA - if (np->n_addrs >= 3 && np->n_intrs >= 3) + if (of_address_to_resource(np, 1, &r_txdma) == 0 && + of_address_to_resource(np, 2, &r_rxdma) == 0) uap->flags |= PMACZILOG_FLAG_HAS_DMA; +#else + memset(&r_txdma, 0, sizeof(struct resource)); + memset(&r_rxdma, 0, sizeof(struct resource)); #endif if (ZS_HAS_DMA(uap)) { - uap->tx_dma_regs = ioremap(np->addrs[np->n_addrs - 2].address, 0x1000); + uap->tx_dma_regs = ioremap(r_txdma.start, 0x100); if (uap->tx_dma_regs == NULL) { uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; goto no_dma; } - uap->rx_dma_regs = ioremap(np->addrs[np->n_addrs - 1].address, 0x1000); + uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100); if (uap->rx_dma_regs == NULL) { iounmap(uap->tx_dma_regs); uap->tx_dma_regs = NULL; diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c index 403d17377f8..03798e9c882 100644 --- a/drivers/video/controlfb.c +++ b/drivers/video/controlfb.c @@ -133,12 +133,6 @@ static int controlfb_mmap(struct fb_info *info, struct file *file, static int controlfb_set_par (struct fb_info *info); static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info); -/* - * inititialization - */ -int control_init(void); -void control_setup(char *); - /******************** Prototypes for internal functions **********************/ static void set_control_clock(unsigned char *params); @@ -550,9 +544,46 @@ static void control_set_hardware(struct fb_info_control *p, struct fb_par_contro /* - * Called from fbmem.c for probing & initializing + * Parse user speficied options (`video=controlfb:') */ -int __init control_init(void) +static void __init control_setup(char *options) +{ + char *this_opt; + + if (!options || !*options) + return; + + while ((this_opt = strsep(&options, ",")) != NULL) { + if (!strncmp(this_opt, "vmode:", 6)) { + int vmode = simple_strtoul(this_opt+6, NULL, 0); + if (vmode > 0 && vmode <= VMODE_MAX && + control_mac_modes[vmode - 1].m[1] >= 0) + default_vmode = vmode; + } else if (!strncmp(this_opt, "cmode:", 6)) { + int depth = simple_strtoul(this_opt+6, NULL, 0); + switch (depth) { + case CMODE_8: + case CMODE_16: + case CMODE_32: + default_cmode = depth; + break; + case 8: + default_cmode = CMODE_8; + break; + case 15: + case 16: + default_cmode = CMODE_16; + break; + case 24: + case 32: + default_cmode = CMODE_32; + break; + } + } + } +} + +static int __init control_init(void) { struct device_node *dp; char *option = NULL; @@ -651,15 +682,16 @@ static void __init find_vram_size(struct fb_info_control *p) static int __init control_of_init(struct device_node *dp) { struct fb_info_control *p; - unsigned long addr; - int i; + struct resource fb_res, reg_res; if (control_fb) { printk(KERN_ERR "controlfb: only one control is supported\n"); return -ENXIO; } - if(dp->n_addrs != 2) { - printk(KERN_ERR "expecting 2 address for control (got %d)", dp->n_addrs); + + if (of_pci_address_to_resource(dp, 2, &fb_res) || + of_pci_address_to_resource(dp, 1, ®_res)) { + printk(KERN_ERR "can't get 2 addresses for control\n"); return -ENXIO; } p = kmalloc(sizeof(*p), GFP_KERNEL); @@ -669,18 +701,12 @@ static int __init control_of_init(struct device_node *dp) memset(p, 0, sizeof(*p)); /* Map in frame buffer and registers */ - for (i = 0; i < dp->n_addrs; ++i) { - addr = dp->addrs[i].address; - if (dp->addrs[i].size >= 0x800000) { - p->fb_orig_base = addr; - p->fb_orig_size = dp->addrs[i].size; - /* use the big-endian aperture (??) */ - p->frame_buffer_phys = addr + 0x800000; - } else { - p->control_regs_phys = addr; - p->control_regs_size = dp->addrs[i].size; - } - } + p->fb_orig_base = fb_res.start; + p->fb_orig_size = fb_res.end - fb_res.start + 1; + /* use the big-endian aperture (??) */ + p->frame_buffer_phys = fb_res.start + 0x800000; + p->control_regs_phys = reg_res.start; + p->control_regs_size = reg_res.end - reg_res.start + 1; if (!p->fb_orig_base || !request_mem_region(p->fb_orig_base,p->fb_orig_size,"controlfb")) { @@ -1059,43 +1085,3 @@ static void control_cleanup(void) } -/* - * Parse user speficied options (`video=controlfb:') - */ -void __init control_setup(char *options) -{ - char *this_opt; - - if (!options || !*options) - return; - - while ((this_opt = strsep(&options, ",")) != NULL) { - if (!strncmp(this_opt, "vmode:", 6)) { - int vmode = simple_strtoul(this_opt+6, NULL, 0); - if (vmode > 0 && vmode <= VMODE_MAX && - control_mac_modes[vmode - 1].m[1] >= 0) - default_vmode = vmode; - } else if (!strncmp(this_opt, "cmode:", 6)) { - int depth = simple_strtoul(this_opt+6, NULL, 0); - switch (depth) { - case CMODE_8: - case CMODE_16: - case CMODE_32: - default_cmode = depth; - break; - case 8: - default_cmode = CMODE_8; - break; - case 15: - case 16: - default_cmode = CMODE_16; - break; - case 24: - case 32: - default_cmode = CMODE_32; - break; - } - } - } -} - diff --git a/drivers/video/offb.c b/drivers/video/offb.c index 00d87f5bb7b..ad1434e3f22 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -223,6 +223,7 @@ static int offb_blank(int blank, struct fb_info *info) int __init offb_init(void) { struct device_node *dp = NULL, *boot_disp = NULL; + #if defined(CONFIG_BOOTX_TEXT) && defined(CONFIG_PPC32) struct device_node *macos_display = NULL; #endif @@ -234,60 +235,54 @@ int __init offb_init(void) if (boot_infos != 0) { unsigned long addr = (unsigned long) boot_infos->dispDeviceBase; + u32 *addrp; + u64 daddr, dsize; + unsigned int flags; + /* find the device node corresponding to the macos display */ while ((dp = of_find_node_by_type(dp, "display"))) { int i; - /* - * Grrr... It looks like the MacOS ATI driver - * munges the assigned-addresses property (but - * the AAPL,address value is OK). - */ - if (strncmp(dp->name, "ATY,", 4) == 0 - && dp->n_addrs == 1) { - unsigned int *ap = - (unsigned int *) get_property(dp, - "AAPL,address", - NULL); - if (ap != NULL) { - dp->addrs[0].address = *ap; - dp->addrs[0].size = 0x01000000; - } - } /* - * The LTPro on the Lombard powerbook has no addresses - * on the display nodes, they are on their parent. + * Look for an AAPL,address property first. */ - if (dp->n_addrs == 0 - && device_is_compatible(dp, "ATY,264LTPro")) { - int na; - unsigned int *ap = (unsigned int *) - get_property(dp, "AAPL,address", &na); - if (ap != 0) - for (na /= sizeof(unsigned int); - na > 0; --na, ++ap) - if (*ap <= addr - && addr < - *ap + 0x1000000) - goto foundit; + unsigned int na; + unsigned int *ap = + (unsigned int *)get_property(dp, "AAPL,address", + &na); + if (ap != 0) { + for (na /= sizeof(unsigned int); na > 0; + --na, ++ap) + if (*ap <= addr && + addr < *ap + 0x1000000) { + macos_display = dp; + goto foundit; + } } /* * See if the display address is in one of the address * ranges for this display. */ - for (i = 0; i < dp->n_addrs; ++i) { - if (dp->addrs[i].address <= addr - && addr < - dp->addrs[i].address + - dp->addrs[i].size) + i = 0; + for (;;) { + addrp = of_get_address(dp, i++, &dsize, &flags); + if (addrp == NULL) break; + if (!(flags & IORESOURCE_MEM)) + continue; + daddr = of_translate_address(dp, addrp); + if (daddr == OF_BAD_ADDR) + continue; + if (daddr <= addr && addr < (daddr + dsize)) { + macos_display = dp; + goto foundit; + } } - if (i < dp->n_addrs) { - foundit: + foundit: + if (macos_display) { printk(KERN_INFO "MacOS display is %s\n", dp->full_name); - macos_display = dp; break; } } @@ -326,8 +321,10 @@ static void __init offb_init_nodriver(struct device_node *dp) int *pp, i; unsigned int len; int width = 640, height = 480, depth = 8, pitch; - unsigned int rsize, *up; - unsigned long address = 0; + unsigned int flags, rsize, *up; + u64 address = OF_BAD_ADDR; + u32 *addrp; + u64 asize; if ((pp = (int *) get_property(dp, "depth", &len)) != NULL && len == sizeof(int)) @@ -363,7 +360,7 @@ static void __init offb_init_nodriver(struct device_node *dp) break; } if (pdev) { - for (i = 0; i < 6 && address == 0; i++) { + for (i = 0; i < 6 && address == OF_BAD_ADDR; i++) { if ((pci_resource_flags(pdev, i) & IORESOURCE_MEM) && (pci_resource_len(pdev, i) >= rsize)) @@ -374,27 +371,33 @@ static void __init offb_init_nodriver(struct device_node *dp) } #endif /* CONFIG_PCI */ - if (address == 0 && - (up = (unsigned *) get_property(dp, "address", &len)) != NULL && - len == sizeof(unsigned)) - address = (u_long) * up; - if (address == 0) { - for (i = 0; i < dp->n_addrs; ++i) - if (dp->addrs[i].size >= - pitch * height * depth / 8) - break; - if (i >= dp->n_addrs) { + /* This one is dodgy, we may drop it ... */ + if (address == OF_BAD_ADDR && + (up = (unsigned *) get_property(dp, "address", &len)) != NULL && + len == sizeof(unsigned int)) + address = (u64) * up; + + if (address == OF_BAD_ADDR) { + for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags)) + != NULL; i++) { + if (!(flags & IORESOURCE_MEM)) + continue; + if (asize >= pitch * height * depth / 8) + break; + } + if (addrp == NULL) { printk(KERN_ERR "no framebuffer address found for %s\n", dp->full_name); return; } - - address = (u_long) dp->addrs[i].address; - -#ifdef CONFIG_PPC64 - address += ((struct pci_dn *)dp->data)->phb->pci_mem_offset; -#endif + address = of_translate_address(dp, addrp); + if (address == OF_BAD_ADDR) { + printk(KERN_ERR + "can't translate framebuffer address for %s\n", + dp->full_name); + return; + } /* kludge for valkyrie */ if (strcmp(dp->name, "valkyrie") == 0) @@ -459,7 +462,9 @@ static void __init offb_init_fb(const char *name, const char *full_name, par->cmap_type = cmap_unknown; if (depth == 8) { - /* XXX kludge for ati */ + + /* Palette hacks disabled for now */ +#if 0 if (dp && !strncmp(name, "ATY,Rage128", 11)) { unsigned long regbase = dp->addrs[2].address; par->cmap_adr = ioremap(regbase, 0x1FFF); @@ -490,6 +495,7 @@ static void __init offb_init_fb(const char *name, const char *full_name, par->cmap_adr = ioremap(regbase + 0x6000, 0x1000); par->cmap_type = cmap_gxt2000; } +#endif fix->visual = par->cmap_adr ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_STATIC_PSEUDOCOLOR; } else diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c index ca4082ae5a1..335e3746555 100644 --- a/drivers/video/platinumfb.c +++ b/drivers/video/platinumfb.c @@ -69,6 +69,8 @@ struct fb_info_platinum { unsigned long total_vram; int clktype; int dactype; + + struct resource rsrc_fb, rsrc_reg; }; /* @@ -97,9 +99,6 @@ static int platinum_var_to_par(struct fb_var_screeninfo *var, * Interface used by the world */ -int platinumfb_init(void); -int platinumfb_setup(char*); - static struct fb_ops platinumfb_ops = { .owner = THIS_MODULE, .fb_check_var = platinumfb_check_var, @@ -138,13 +137,15 @@ static int platinumfb_set_par (struct fb_info *info) init = platinum_reg_init[pinfo->vmode-1]; - if (pinfo->vmode == 13 && pinfo->cmode > 0) - offset = 0x10; + if ((pinfo->vmode == VMODE_832_624_75) && (pinfo->cmode > CMODE_8)) + offset = 0x10; + info->screen_base = pinfo->frame_buffer + init->fb_offset + offset; info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset; info->fix.visual = (pinfo->cmode == CMODE_8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR; - info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode) + offset; + info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode) + + offset; printk("line_length: %x\n", info->fix.line_length); return 0; } @@ -221,7 +222,9 @@ static int platinumfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, static inline int platinum_vram_reqd(int video_mode, int color_mode) { return vmode_attrs[video_mode-1].vres * - (vmode_attrs[video_mode-1].hres * (1<<color_mode) + 0x20) +0x1000; + (vmode_attrs[video_mode-1].hres * (1<<color_mode) + + ((video_mode == VMODE_832_624_75) && + (color_mode > CMODE_8)) ? 0x10 : 0x20) + 0x1000; } #define STORE_D2(a, d) { \ @@ -481,7 +484,7 @@ static int platinum_var_to_par(struct fb_var_screeninfo *var, /* * Parse user speficied options (`video=platinumfb:') */ -int __init platinumfb_setup(char *options) +static int __init platinumfb_setup(char *options) { char *this_opt; @@ -522,19 +525,15 @@ int __init platinumfb_setup(char *options) #define invalidate_cache(addr) #endif -static int __devinit platinumfb_probe(struct of_device* odev, const struct of_device_id *match) +static int __devinit platinumfb_probe(struct of_device* odev, + const struct of_device_id *match) { struct device_node *dp = odev->node; struct fb_info *info; struct fb_info_platinum *pinfo; - unsigned long addr, size; volatile __u8 *fbuffer; - int i, bank0, bank1, bank2, bank3, rc; + int bank0, bank1, bank2, bank3, rc; - if (dp->n_addrs != 2) { - printk(KERN_ERR "expecting 2 address for platinum (got %d)", dp->n_addrs); - return -ENXIO; - } printk(KERN_INFO "platinumfb: Found Apple Platinum video hardware\n"); info = framebuffer_alloc(sizeof(*pinfo), &odev->dev); @@ -542,26 +541,39 @@ static int __devinit platinumfb_probe(struct of_device* odev, const struct of_de return -ENOMEM; pinfo = info->par; - /* Map in frame buffer and registers */ - for (i = 0; i < dp->n_addrs; ++i) { - addr = dp->addrs[i].address; - size = dp->addrs[i].size; - /* Let's assume we can request either all or nothing */ - if (!request_mem_region(addr, size, "platinumfb")) { - framebuffer_release(info); - return -ENXIO; - } - if (size >= 0x400000) { - /* frame buffer - map only 4MB */ - pinfo->frame_buffer_phys = addr; - pinfo->frame_buffer = __ioremap(addr, 0x400000, _PAGE_WRITETHRU); - pinfo->base_frame_buffer = pinfo->frame_buffer; - } else { - /* registers */ - pinfo->platinum_regs_phys = addr; - pinfo->platinum_regs = ioremap(addr, size); - } + if (of_address_to_resource(dp, 0, &pinfo->rsrc_reg) || + of_address_to_resource(dp, 1, &pinfo->rsrc_fb)) { + printk(KERN_ERR "platinumfb: Can't get resources\n"); + framebuffer_release(info); + return -ENXIO; } + if (!request_mem_region(pinfo->rsrc_reg.start, + pinfo->rsrc_reg.start - + pinfo->rsrc_reg.end + 1, + "platinumfb registers")) { + framebuffer_release(info); + return -ENXIO; + } + if (!request_mem_region(pinfo->rsrc_fb.start, + pinfo->rsrc_fb.start + - pinfo->rsrc_fb.end + 1, + "platinumfb framebuffer")) { + release_mem_region(pinfo->rsrc_reg.start, + pinfo->rsrc_reg.end - + pinfo->rsrc_reg.start + 1); + framebuffer_release(info); + return -ENXIO; + } + + /* frame buffer - map only 4MB */ + pinfo->frame_buffer_phys = pinfo->rsrc_fb.start; + pinfo->frame_buffer = __ioremap(pinfo->rsrc_fb.start, 0x400000, + _PAGE_WRITETHRU); + pinfo->base_frame_buffer = pinfo->frame_buffer; + + /* registers */ + pinfo->platinum_regs_phys = pinfo->rsrc_reg.start; + pinfo->platinum_regs = ioremap(pinfo->rsrc_reg.start, 0x1000); pinfo->cmap_regs_phys = 0xf301b000; /* XXX not in prom? */ request_mem_region(pinfo->cmap_regs_phys, 0x1000, "platinumfb cmap"); @@ -624,18 +636,16 @@ static int __devexit platinumfb_remove(struct of_device* odev) { struct fb_info *info = dev_get_drvdata(&odev->dev); struct fb_info_platinum *pinfo = info->par; - struct device_node *dp = odev->node; - unsigned long addr, size; - int i; unregister_framebuffer (info); /* Unmap frame buffer and registers */ - for (i = 0; i < dp->n_addrs; ++i) { - addr = dp->addrs[i].address; - size = dp->addrs[i].size; - release_mem_region(addr, size); - } + release_mem_region(pinfo->rsrc_fb.start, + pinfo->rsrc_fb.end - + pinfo->rsrc_fb.start + 1); + release_mem_region(pinfo->rsrc_reg.start, + pinfo->rsrc_reg.end - + pinfo->rsrc_reg.start + 1); iounmap(pinfo->frame_buffer); iounmap(pinfo->platinum_regs); release_mem_region(pinfo->cmap_regs_phys, 0x1000); @@ -662,7 +672,7 @@ static struct of_platform_driver platinum_driver = .remove = platinumfb_remove, }; -int __init platinumfb_init(void) +static int __init platinumfb_init(void) { #ifndef MODULE char *option = NULL; @@ -676,7 +686,7 @@ int __init platinumfb_init(void) return 0; } -void __exit platinumfb_exit(void) +static void __exit platinumfb_exit(void) { of_unregister_driver(&platinum_driver); } diff --git a/drivers/video/platinumfb.h b/drivers/video/platinumfb.h index 2834fc1c344..f6bd77cafd1 100644 --- a/drivers/video/platinumfb.h +++ b/drivers/video/platinumfb.h @@ -158,7 +158,9 @@ static struct platinum_regvals platinum_reg_init_14 = { /* 832x624, 75Hz (13) */ static struct platinum_regvals platinum_reg_init_13 = { 0x70, - { 864, 1680, 3360 }, /* MacOS does 1680 instead of 1696 to fit 16bpp in 1MB */ + { 864, 1680, 3344 }, /* MacOS does 1680 instead of 1696 to fit 16bpp in 1MB, + * and we use 3344 instead of 3360 to fit in 2Mb + */ { 0xff0, 4, 0, 0, 0, 0, 0x299, 0, 0, 0x21e, 0x120, 0x10, 0x23f, 0x1f, 0x25, 0x37, 0x8a, 0x22a, 0x23e, 0x536, 0x534, 4, 9, 0x52, diff --git a/drivers/video/valkyriefb.c b/drivers/video/valkyriefb.c index ce97ec8eae9..2bdeb4baa95 100644 --- a/drivers/video/valkyriefb.c +++ b/drivers/video/valkyriefb.c @@ -342,19 +342,19 @@ int __init valkyriefb_init(void) #else /* ppc (!CONFIG_MAC) */ { struct device_node *dp; + struct resource r; - dp = find_devices("valkyrie"); + dp = of_find_node_by_name(NULL, "valkyrie"); if (dp == 0) return 0; - if (dp->n_addrs != 1) { - printk(KERN_ERR "expecting 1 address for valkyrie (got %d)\n", - dp->n_addrs); + if (of_address_to_resource(dp, 0, &r)) { + printk(KERN_ERR "can't find address for valkyrie\n"); return 0; } - frame_buffer_phys = dp->addrs[0].address; - cmap_regs_phys = dp->addrs[0].address+0x304000; + frame_buffer_phys = r.start; + cmap_regs_phys = r.start + 0x304000; flags = _PAGE_WRITETHRU; } #endif /* ppc (!CONFIG_MAC) */ |