diff options
Diffstat (limited to 'drivers')
21 files changed, 969 insertions, 111 deletions
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index b6da9c3873f..aa20ce8cc66 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -1096,8 +1096,19 @@ static int xc2028_set_params(struct dvb_frontend *fe, } /* All S-code tables need a 200kHz shift */ - if (priv->ctrl.demod) + if (priv->ctrl.demod) { demod = priv->ctrl.demod + 200; + /* + * The DTV7 S-code table needs a 700 kHz shift. + * Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this + * + * DTV7 is only used in Australia. Germany or Italy may also + * use this firmware after initialization, but a tune to a UHF + * channel should then cause DTV78 to be used. + */ + if (type & DTV7) + demod += 500; + } return generic_set_freq(fe, p->frequency, T_DIGITAL_TV, type, 0, demod); diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 68eb4493f99..d8d4214fd65 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -1,5 +1,6 @@ config TTPCI_EEPROM tristate + depends on I2C default n config DVB_AV7110 diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 640421ceb24..46d21632961 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -1200,7 +1200,7 @@ static int si470x_fops_release(struct file *file) video_unregister_device(radio->videodev); kfree(radio->buffer); kfree(radio); - goto done; + goto unlock; } /* stop rds reception */ @@ -1213,9 +1213,8 @@ static int si470x_fops_release(struct file *file) retval = si470x_stop(radio); usb_autopm_put_interface(radio->intf); } - +unlock: mutex_unlock(&radio->disconnect_lock); - done: return retval; } diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 061e147f6f2..84b6fc15519 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -312,6 +312,14 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + config VIDEO_TCM825X tristate "TCM825x camera sensor support" depends on I2C && VIDEO_V4L2 diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 7fb3add1b38..9f2e3214a48 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index c92a25036f0..36f2d76006f 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -198,11 +198,14 @@ static const struct cx18_card_pci_info cx18_pci_mpc718[] = { static const struct cx18_card cx18_card_mpc718 = { .type = CX18_CARD_YUAN_MPC718, - .name = "Yuan MPC718", - .comment = "Analog video capture works; some audio line in may not.\n", + .name = "Yuan MPC718 MiniPCI DVB-T/Analog", + .comment = "Experimenters needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_418_AV, - .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL, + .hw_muxer = CX18_HW_GPIO_MUX, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | + CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, @@ -211,27 +214,34 @@ static const struct cx18_card cx18_card_mpc718 = { { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, - { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, - { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 0 }, - { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL1, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 }, }, - .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 }, .tuners = { /* XC3028 tuner */ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, + /* FIXME - the FM radio is just a guess and driver doesn't use SIF */ + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, .ddr = { - /* Probably Samsung K4D263238G-VC33 memory */ - .chip_config = 0x003, - .refresh = 0x30c, - .timing1 = 0x23230b73, - .timing2 = 0x08, + /* Hynix HY5DU283222B DDR RAM */ + .chip_config = 0x303, + .refresh = 0x3bd, + .timing1 = 0x36320966, + .timing2 = 0x1f, .tune_lane = 0, .initial_emrs = 2, }, + .gpio_init.initial_value = 0x1, + .gpio_init.direction = 0x3, + /* FIXME - these GPIO's are just guesses */ + .gpio_audio_input = { .mask = 0x3, + .tuner = 0x1, + .linein = 0x3, + .radio = 0x1 }, .xceive_pin = 0, .pci_list = cx18_pci_mpc718, .i2c = &cx18_i2c_std, diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index 6ea3fe623ef..51a0c33b25b 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -30,6 +30,10 @@ #include "s5h1409.h" #include "mxl5005s.h" #include "zl10353.h" + +#include <linux/firmware.h> +#include "mt352.h" +#include "mt352_priv.h" #include "tuner-xc2028.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -38,6 +42,11 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define CX18_CLOCK_ENABLE2 0xc71024 #define CX18_DMUX_CLK_MASK 0x0080 +/* + * CX18_CARD_HVR_1600_ESMT + * CX18_CARD_HVR_1600_SAMSUNG + */ + static struct mxl5005s_config hauppauge_hvr1600_tuner = { .i2c_address = 0xC6 >> 1, .if_freq = IF_FREQ_5380000HZ, @@ -65,6 +74,9 @@ static struct s5h1409_config hauppauge_hvr1600_config = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +/* + * CX18_CARD_LEADTEK_DVR3100H + */ /* Information/confirmation of proper config values provided by Terry Wu */ static struct zl10353_config leadtek_dvr3100h_demod = { .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ @@ -74,6 +86,121 @@ static struct zl10353_config leadtek_dvr3100h_demod = { .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ }; +/* + * CX18_CARD_YUAN_MPC718 + */ +/* + * Due to + * + * 1. an absence of information on how to prgram the MT352 + * 2. the Linux mt352 module pushing MT352 initialzation off onto us here + * + * We have to use an init sequence that *you* must extract from the Windows + * driver (yuanrap.sys) and which we load as a firmware. + * + * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual + * with chip programming details, then I can remove this annoyance. + */ +static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream, + const struct firmware **fw) +{ + struct cx18 *cx = stream->cx; + const char *fn = "dvb-cx18-mpc718-mt352.fw"; + int ret; + + ret = request_firmware(fw, fn, &cx->pci_dev->dev); + if (ret) + CX18_ERR("Unable to open firmware file %s\n", fn); + else { + size_t sz = (*fw)->size; + if (sz < 2 || sz > 64 || (sz % 2) != 0) { + CX18_ERR("Firmware %s has a bad size: %lu bytes\n", + fn, (unsigned long) sz); + ret = -EILSEQ; + release_firmware(*fw); + *fw = NULL; + } + } + + if (ret) { + CX18_ERR("The MPC718 board variant with the MT352 DVB-T" + "demodualtor will not work without it\n"); + CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware " + "mpc718' if you need the firmware\n"); + } + return ret; +} + +static int yuan_mpc718_mt352_init(struct dvb_frontend *fe) +{ + struct cx18_dvb *dvb = container_of(fe->dvb, + struct cx18_dvb, dvb_adapter); + struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb); + const struct firmware *fw = NULL; + int ret; + int i; + u8 buf[3]; + + ret = yuan_mpc718_mt352_reqfw(stream, &fw); + if (ret) + return ret; + + /* Loop through all the register-value pairs in the firmware file */ + for (i = 0; i < fw->size; i += 2) { + buf[0] = fw->data[i]; + /* Intercept a few registers we want to set ourselves */ + switch (buf[0]) { + case TRL_NOMINAL_RATE_0: + /* Set our custom OFDM bandwidth in the case below */ + break; + case TRL_NOMINAL_RATE_1: + /* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */ + /* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */ + /* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */ + buf[1] = 0x72; + buf[2] = 0x49; + mt352_write(fe, buf, 3); + break; + case INPUT_FREQ_0: + /* Set our custom IF in the case below */ + break; + case INPUT_FREQ_1: + /* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */ + buf[1] = 0x31; + buf[2] = 0xc0; + mt352_write(fe, buf, 3); + break; + default: + /* Pass through the register-value pair from the fw */ + buf[1] = fw->data[i+1]; + mt352_write(fe, buf, 2); + break; + } + } + + buf[0] = (u8) TUNER_GO; + buf[1] = 0x01; /* Go */ + mt352_write(fe, buf, 2); + release_firmware(fw); + return 0; +} + +static struct mt352_config yuan_mpc718_mt352_demod = { + .demod_address = 0x1e >> 1, + .adc_clock = 20480, /* 20.480 MHz */ + .if2 = 4560, /* 4.560 MHz */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .demod_init = yuan_mpc718_mt352_init, +}; + +static struct zl10353_config yuan_mpc718_zl10353_demod = { + .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ + .if2 = 45600, /* 4.560 MHz IF from the XC3028 */ + .parallel_ts = 1, /* Not a serial TS */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ +}; + static int dvb_register(struct cx18_stream *stream); /* Kernel DVB framework calls this when the feed needs to start. @@ -113,6 +240,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) break; case CX18_CARD_LEADTEK_DVR3100H: + case CX18_CARD_YUAN_MPC718: default: /* Assumption - Parallel transport - Signalling * undefined or default. @@ -326,6 +454,38 @@ static int dvb_register(struct cx18_stream *stream) fe->ops.tuner_ops.set_config(fe, &ctrl); } break; + case CX18_CARD_YUAN_MPC718: + /* + * TODO + * Apparently, these cards also could instead have a + * DiBcom demod supported by one of the db7000 drivers + */ + dvb->fe = dvb_attach(mt352_attach, + &yuan_mpc718_mt352_demod, + &cx->i2c_adap[1]); + if (dvb->fe == NULL) + dvb->fe = dvb_attach(zl10353_attach, + &yuan_mpc718_zl10353_demod, + &cx->i2c_adap[1]); + if (dvb->fe != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &cx->i2c_adap[1], + .i2c_addr = 0xc2 >> 1, + .ctrl = NULL, + }; + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + .type = XC2028_AUTO, + }; + + fe = dvb_attach(xc2028_attach, dvb->fe, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctrl); + } + break; default: /* No Digital Tv Support */ break; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 48a975134ac..86ac529e62b 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -463,6 +463,30 @@ static struct xc5000_config mygica_x8506_xc5000_config = { .if_khz = 5380, }; +static int cx23885_dvb_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *param) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1275: + switch (param->u.vsb.modulation) { + case VSB_8: + cx23885_gpio_clear(dev, GPIO_5); + break; + case QAM_64: + case QAM_256: + default: + cx23885_gpio_set(dev, GPIO_5); + break; + } + break; + } + return (port->set_frontend_save) ? + port->set_frontend_save(fe, param) : -ENODEV; +} + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -502,6 +526,12 @@ static int dvb_register(struct cx23885_tsport *port) 0x60, &dev->i2c_bus[1].i2c_adap, &hauppauge_hvr127x_config); } + + /* FIXME: temporary hack */ + /* define bridge override to set_frontend */ + port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend; + fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend; + break; case CX23885_BOARD_HAUPPAUGE_HVR1255: i2c_bus = &dev->i2c_bus[0]; diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 1a2ac518a3f..214a55e943b 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -288,6 +288,10 @@ struct cx23885_tsport { /* Allow a single tsport to have multiple frontends */ u32 num_frontends; void *port_priv; + + /* FIXME: temporary hack */ + int (*set_frontend_save) (struct dvb_frontend *, + struct dvb_frontend_parameters *); }; struct cx23885_dev { diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 16a5af30e9d..6524b493e03 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -8,6 +8,8 @@ config VIDEO_EM28XX select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO + ---help--- This is a video4linux driver for Empia 28xx based TV cards. diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index c43fdb9bc88..ebd24a25fb8 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -58,6 +58,8 @@ static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); +#define MT9V011_VERSION 0x8243 + /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */ static unsigned long em28xx_devused; @@ -191,6 +193,13 @@ static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { {EM28XX_R08_GPIO, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; + +static struct em28xx_reg_seq silvercrest_reg_seq[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0x01, 0xf7, 10}, + { -1, -1, -1, -1}, +}; + /* * Board definitions */ @@ -438,6 +447,18 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_VIDEO, } }, }, + [EM2820_BOARD_SILVERCREST_WEBCAM] = { + .name = "Silvercrest Webcam 1.3mpix", + .tuner_type = TUNER_ABSENT, + .is_27xx = 1, + .decoder = EM28XX_MT9V011, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, + } }, + }, [EM2821_BOARD_SUPERCOMP_USB_2] = { .name = "Supercomp USB 2.0 TV", .valid = EM28XX_BOARD_NOT_VALIDATED, @@ -826,7 +847,7 @@ struct em28xx_board em28xx_boards[] = { .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, - .dvb_gpio = default_analog, + .dvb_gpio = default_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, @@ -1639,6 +1660,11 @@ static unsigned short tvp5150_addrs[] = { I2C_CLIENT_END }; +static unsigned short mt9v011_addrs[] = { + 0xba >> 1, + I2C_CLIENT_END +}; + static unsigned short msp3400_addrs[] = { 0x80 >> 1, 0x88 >> 1, @@ -1678,6 +1704,46 @@ static inline void em28xx_set_model(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ; } +/* HINT method: webcam I2C chips + * + * This method work for webcams with Micron sensors + */ +static int em28xx_hint_sensor(struct em28xx *dev) +{ + int rc; + char *sensor_name; + unsigned char cmd; + __be16 version_be; + u16 version; + + if (dev->model != EM2820_BOARD_UNKNOWN) + return 0; + + dev->i2c_client.addr = 0xba >> 1; + cmd = 0; + i2c_master_send(&dev->i2c_client, &cmd, 1); + rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2); + if (rc != 2) + return -EINVAL; + + version = be16_to_cpu(version_be); + + switch (version) { + case MT9V011_VERSION: + dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + sensor_name = "mt9v011"; + break; + default: + printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version)); + return -EINVAL; + } + + em28xx_errdev("Sensor is %s, assuming that webcam is %s\n", + sensor_name, em28xx_boards[dev->model].name); + + return 0; +} + /* Since em28xx_pre_card_setup() requires a proper dev->model, * this won't work for boards with generic PCI IDs */ @@ -1706,7 +1772,10 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_info("chip ID is em2750\n"); break; case CHIP_ID_EM2820: - em28xx_info("chip ID is em2820\n"); + if (dev->board.is_27xx) + em28xx_info("chip is em2710\n"); + else + em28xx_info("chip ID is em2820\n"); break; case CHIP_ID_EM2840: em28xx_info("chip ID is em2840\n"); @@ -2158,6 +2227,10 @@ void em28xx_card_setup(struct em28xx *dev) before probing the i2c bus. */ em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; + case EM2820_BOARD_SILVERCREST_WEBCAM: + /* FIXME: need to document the registers bellow */ + em28xx_write_reg(dev, 0x0d, 0x42); + em28xx_write_reg(dev, 0x13, 0x08); } if (dev->board.has_snapshot_button) @@ -2189,6 +2262,10 @@ void em28xx_card_setup(struct em28xx *dev) v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvp5150", "tvp5150", tvp5150_addrs); + if (dev->board.decoder == EM28XX_MT9V011) + v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "mt9v011", "mt9v011", mt9v011_addrs); + if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvaudio", "tvaudio", dev->board.tvaudio_addr); @@ -2333,6 +2410,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } + em28xx_hint_sensor(dev); + /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); @@ -2573,6 +2652,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, retval = em28xx_init_dev(&dev, udev, interface, nr); if (retval) { em28xx_devused &= ~(1<<dev->devno); + mutex_unlock(&dev->lock); kfree(dev); goto err; } diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index c8d7ce8fbd3..079ab4d563a 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -648,17 +648,28 @@ int em28xx_capture_start(struct em28xx *dev, int start) int em28xx_set_outfmt(struct em28xx *dev) { int ret; + int vinmode, vinctl, outfmt; + + outfmt = dev->format->reg; + + if (dev->board.is_27xx) { + vinmode = 0x0d; + vinctl = 0x00; + } else { + vinmode = 0x10; + vinctl = 0x11; + } ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT, - dev->format->reg | 0x20, 0x3f); + outfmt | 0x20, 0xff); if (ret < 0) - return ret; + return ret; - ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10); + ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode); if (ret < 0) return ret; - return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11); + return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl); } static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, @@ -695,13 +706,19 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v) { u8 mode; /* the em2800 scaler only supports scaling down to 50% */ - if (dev->board.is_em2800) + + if (dev->board.is_27xx) { + /* FIXME: Don't use the scaler yet */ + mode = 0; + } else if (dev->board.is_em2800) { mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00); - else { + } else { u8 buf[2]; + buf[0] = h; buf[1] = h >> 8; em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2); + buf[0] = v; buf[1] = v >> 8; em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2); @@ -720,8 +737,11 @@ int em28xx_resolution_set(struct em28xx *dev) height = norm_maxh(dev) >> 1; em28xx_set_outfmt(dev); + + em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2); em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2); + return em28xx_scaler_set(dev, dev->hscale, dev->vscale); } diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index e7b47c8da8f..3da97c32b8f 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -243,6 +243,14 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, + .parallel_ts = 1, + .if2 = 45600, +}; + #ifdef EM28XX_DRX397XD_SUPPORT /* [TODO] djh - not sure yet what the device config needs to contain */ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { @@ -433,7 +441,6 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: - case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_KWORLD_DVB_310U: case EM2880_BOARD_EMPIRE_DUAL_TV: dvb->frontend = dvb_attach(zl10353_attach, @@ -444,6 +451,25 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2880_BOARD_TERRATEC_HYBRID_XS: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_terratec_xs_zl10353_xc3028, + &dev->i2c_adap); + if (dvb->frontend == NULL) { + /* This board could have either a zl10353 or a mt352. + If the chip id isn't for zl10353, try mt352 */ + + /* FIXME: make support for mt352 work */ + printk(KERN_ERR "version of this board with mt352 not " + "currently supported\n"); + result = -EINVAL; + goto out_free; + } + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; case EM2883_BOARD_KWORLD_HYBRID_330U: case EM2882_BOARD_EVGA_INDTUBE: dvb->frontend = dvb_attach(s5h1409_attach, diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 2c86fcf089f..27e33a287df 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -483,7 +483,7 @@ static char *i2c_devs[128] = { [0xa0 >> 1] = "eeprom", [0xb0 >> 1] = "tda9874", [0xb8 >> 1] = "tvp5150a", - [0xba >> 1] = "tvp5150a", + [0xba >> 1] = "webcam sensor or tvp5150a", [0xc0 >> 1] = "tuner (analog)", [0xc2 >> 1] = "tuner (analog)", [0xc4 >> 1] = "tuner (analog)", diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 8fe1beecfff..14316c91217 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -90,10 +90,35 @@ MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); /* supported video standards */ static struct em28xx_fmt format[] = { { - .name = "16bpp YUY2, 4:2:2, packed", + .name = "16 bpp YUY2, 4:2:2, packed", .fourcc = V4L2_PIX_FMT_YUYV, .depth = 16, .reg = EM28XX_OUTFMT_YUV422_Y0UY1V, + }, { + .name = "16 bpp RGB 565, LE", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = 16, + .reg = EM28XX_OUTFMT_RGB_16_656, + }, { + .name = "8 bpp Bayer BGBG..GRGR", + .fourcc = V4L2_PIX_FMT_SBGGR8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_BGBG, + }, { + .name = "8 bpp Bayer GRGR..BGBG", + .fourcc = V4L2_PIX_FMT_SGRBG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GRGR, + }, { + .name = "8 bpp Bayer GBGB..RGRG", + .fourcc = V4L2_PIX_FMT_SGBRG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GBGB, + }, { + .name = "12 bpp YUV411", + .fourcc = V4L2_PIX_FMT_YUV411P, + .depth = 12, + .reg = EM28XX_OUTFMT_YUV411, }, }; @@ -701,7 +726,11 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return -EINVAL; } - if (dev->board.is_em2800) { + if (dev->board.is_27xx) { + /* FIXME: This is the only supported fmt */ + width = 640; + height = 480; + } else if (dev->board.is_em2800) { /* the em2800 can only scale down to 50% */ height = height > (3 * maxh / 4) ? maxh : maxh / 2; width = width > (3 * maxw / 4) ? maxw : maxw / 2; @@ -733,13 +762,40 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } +static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc, + unsigned width, unsigned height) +{ + struct em28xx_fmt *fmt; + + /* FIXME: This is the only supported fmt */ + if (dev->board.is_27xx) { + width = 640; + height = 480; + } + + fmt = format_by_fourcc(fourcc); + if (!fmt) + return -EINVAL; + + dev->format = fmt; + dev->width = width; + dev->height = height; + + /* set new image size */ + get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); + + em28xx_set_alternate(dev); + em28xx_resolution_set(dev); + + return 0; +} + static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; int rc; - struct em28xx_fmt *fmt; rc = check_dev(dev); if (rc < 0) @@ -749,12 +805,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, vidioc_try_fmt_vid_cap(file, priv, f); - fmt = format_by_fourcc(f->fmt.pix.pixelformat); - if (!fmt) { - rc = -EINVAL; - goto out; - } - if (videobuf_queue_is_busy(&fh->vb_vidq)) { em28xx_errdev("%s queue busy\n", __func__); rc = -EBUSY; @@ -767,16 +817,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, goto out; } - /* set new image size */ - dev->width = f->fmt.pix.width; - dev->height = f->fmt.pix.height; - dev->format = fmt; - get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); - - em28xx_set_alternate(dev); - em28xx_resolution_set(dev); - - rc = 0; + rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat, + f->fmt.pix.width, f->fmt.pix.height); out: mutex_unlock(&dev->lock); @@ -1616,11 +1658,6 @@ static int em28xx_v4l2_open(struct file *filp) filp->private_data = fh; if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); - dev->hscale = 0; - dev->vscale = 0; - em28xx_set_mode(dev, EM28XX_ANALOG_MODE); em28xx_set_alternate(dev); em28xx_resolution_set(dev); @@ -1962,15 +1999,14 @@ int em28xx_register_analog_devices(struct em28xx *dev) /* set default norm */ dev->norm = em28xx_video_template.current_norm; - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); dev->interlaced = EM28XX_INTERLACED_DEFAULT; - dev->hscale = 0; - dev->vscale = 0; dev->ctl_input = 0; /* Analog specific initialization */ dev->format = &format[0]; + em28xx_set_video_format(dev, format[0].fourcc, + norm_maxw(dev), norm_maxh(dev)); + video_mux(dev, dev->ctl_input); /* Audio defaults */ diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 813ce45c2f9..d90fef46376 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -107,6 +107,7 @@ #define EM2860_BOARD_TERRATEC_AV350 68 #define EM2882_BOARD_KWORLD_ATSC_315U 69 #define EM2882_BOARD_EVGA_INDTUBE 70 +#define EM2820_BOARD_SILVERCREST_WEBCAM 71 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -360,6 +361,7 @@ enum em28xx_decoder { EM28XX_NODECODER, EM28XX_TVP5150, EM28XX_SAA711X, + EM28XX_MT9V011, }; enum em28xx_adecoder { @@ -388,6 +390,7 @@ struct em28xx_board { unsigned int max_range_640_480:1; unsigned int has_dvb:1; unsigned int has_snapshot_button:1; + unsigned int is_27xx:1; unsigned int valid:1; unsigned char xclk, i2c_speed; diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h index 9df7137fe67..992ce530f13 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.h +++ b/drivers/media/video/gspca/stv06xx/stv06xx.h @@ -36,10 +36,6 @@ #define STV_ISOC_ENDPOINT_ADDR 0x81 -#ifndef V4L2_PIX_FMT_SGRBG8 -#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') -#endif - #define STV_REG23 0x0423 /* Control registers of the STV0600 ASIC */ diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c new file mode 100644 index 00000000000..1fe8fc9183a --- /dev/null +++ b/drivers/media/video/mt9v011.c @@ -0,0 +1,431 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include <linux/i2c.h> +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <media/v4l2-device.h> +#include "mt9v011.h" +#include <media/v4l2-i2c-drv.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_LICENSE("GPL"); + + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +/* supported controls */ +static struct v4l2_queryctrl mt9v011_qctrl[] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = (1 << 10) - 1, + .step = 1, + .default_value = 0x0020, + .flags = 0, + }, { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, +}; + +struct mt9v011 { + struct v4l2_subdev sd; + unsigned width, height; + + u16 global_gain, red_bal, blue_bal; +}; + +static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9v011, sd); +} + +static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + __be16 buffer; + int rc, val; + + rc = i2c_master_send(c, &addr, 1); + if (rc != 1) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 1)\n", rc); + + msleep(10); + + rc = i2c_master_recv(c, (char *)&buffer, 2); + if (rc != 2) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 2)\n", rc); + + val = be16_to_cpu(buffer); + + v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val); + + return val; +} + +static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr, + u16 value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[3]; + int rc; + + buffer[0] = addr; + buffer[1] = value >> 8; + buffer[2] = value & 0xff; + + v4l2_dbg(2, debug, sd, + "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value); + rc = i2c_master_send(c, buffer, 3); + if (rc != 3) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 3)\n", rc); +} + + +struct i2c_reg_value { + unsigned char reg; + u16 value; +}; + +/* + * Values used at the original driver + * Some values are marked as Reserved at the datasheet + */ +static const struct i2c_reg_value mt9v011_init_default[] = { + { R0D_MT9V011_RESET, 0x0001 }, + { R0D_MT9V011_RESET, 0x0000 }, + + { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, + { R09_MT9V011_SHUTTER_WIDTH, 0x1fc }, + + { R0A_MT9V011_CLK_SPEED, 0x0000 }, + { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, + { R20_MT9V011_READ_MODE, 0x1000 }, + + { R07_MT9V011_OUT_CTRL, 0x000a }, /* chip enable */ +}; + +static void set_balance(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + u16 green1_gain, green2_gain, blue_gain, red_gain; + + green1_gain = core->global_gain; + green2_gain = core->global_gain; + + blue_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + red_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain); + mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green1_gain); + mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain); + mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); +} + +static void set_res(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned vstart, hstart; + + /* + * The mt9v011 doesn't have scaling. So, in order to select the desired + * resolution, we're cropping at the middle of the sensor. + * hblank and vblank should be adjusted, in order to warrant that + * we'll preserve the line timings for 30 fps, no matter what resolution + * is selected. + * NOTE: datasheet says that width (and height) should be filled with + * width-1. However, this doesn't work, since one pixel per line will + * be missing. + */ + + hstart = 14 + (640 - core->width) / 2; + mt9v011_write(sd, R02_MT9V011_COLSTART, hstart); + mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); + mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); + + vstart = 8 + (640 - core->height) / 2; + mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); + mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); + mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); +}; + +static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++) + mt9v011_write(sd, mt9v011_init_default[i].reg, + mt9v011_init_default[i].value); + + set_balance(sd); + set_res(sd); + + return 0; +}; + +static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + + v4l2_dbg(1, debug, sd, "g_ctrl called\n"); + + switch (ctrl->id) { + case V4L2_CID_GAIN: + ctrl->value = core->global_gain; + return 0; + case V4L2_CID_RED_BALANCE: + ctrl->value = core->red_bal; + return 0; + case V4L2_CID_BLUE_BALANCE: + ctrl->value = core->blue_bal; + return 0; + } + return -EINVAL; +} + +static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + u8 i, n; + n = ARRAY_SIZE(mt9v011_qctrl); + + for (i = 0; i < n; i++) { + if (ctrl->id != mt9v011_qctrl[i].id) + continue; + if (ctrl->value < mt9v011_qctrl[i].minimum || + ctrl->value > mt9v011_qctrl[i].maximum) + return -ERANGE; + v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n", + ctrl->id, ctrl->value); + break; + } + + switch (ctrl->id) { + case V4L2_CID_GAIN: + core->global_gain = ctrl->value; + break; + case V4L2_CID_RED_BALANCE: + core->red_bal = ctrl->value; + break; + case V4L2_CID_BLUE_BALANCE: + core->blue_bal = ctrl->value; + break; + default: + return -EINVAL; + } + + set_balance(sd); + + return 0; +} + +static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt) +{ + if (fmt->index > 0) + return -EINVAL; + + fmt->flags = 0; + strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG"); + fmt->pixelformat = V4L2_PIX_FMT_SGRBG8; + + return 0; +} + +static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8) + return -EINVAL; + + v4l_bound_align_image(&pix->width, 48, 639, 1, + &pix->height, 32, 480, 1, 0); + + return 0; +} + +static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + struct mt9v011 *core = to_mt9v011(sd); + int rc; + + rc = mt9v011_try_fmt(sd, fmt); + if (rc < 0) + return -EINVAL; + + core->width = pix->width; + core->height = pix->height; + + set_res(sd); + + return 0; +} + + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9v011_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + reg->val = mt9v011_read(sd, reg->reg & 0xff); + reg->size = 2; + + return 0; +} + +static int mt9v011_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff); + + return 0; +} +#endif + +static int mt9v011_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011, + MT9V011_VERSION); +} + +static const struct v4l2_subdev_core_ops mt9v011_core_ops = { + .g_ctrl = mt9v011_g_ctrl, + .s_ctrl = mt9v011_s_ctrl, + .reset = mt9v011_reset, + .g_chip_ident = mt9v011_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9v011_g_register, + .s_register = mt9v011_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9v011_video_ops = { + .enum_fmt = mt9v011_enum_fmt, + .try_fmt = mt9v011_try_fmt, + .s_fmt = mt9v011_s_fmt, +}; + +static const struct v4l2_subdev_ops mt9v011_ops = { + .core = &mt9v011_core_ops, + .video = &mt9v011_video_ops, +}; + + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ + +static int mt9v011_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + u16 version; + struct mt9v011 *core; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL); + if (!core) + return -ENOMEM; + + sd = &core->sd; + v4l2_i2c_subdev_init(sd, c, &mt9v011_ops); + + /* Check if the sensor is really a MT9V011 */ + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + if (version != MT9V011_VERSION) { + v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n", + version); + kfree(core); + return -EINVAL; + } + + core->global_gain = 0x0024; + core->width = 640; + core->height = 480; + + v4l_info(c, "chip found @ 0x%02x (%s)\n", + c->addr << 1, c->adapter->name); + + return 0; +} + +static int mt9v011_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + + v4l2_dbg(1, debug, sd, + "mt9v011.c: removing mt9v011 adapter on address 0x%x\n", + c->addr << 1); + + v4l2_device_unregister_subdev(sd); + kfree(to_mt9v011(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id mt9v011_id[] = { + { "mt9v011", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v011_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "mt9v011", + .probe = mt9v011_probe, + .remove = mt9v011_remove, + .id_table = mt9v011_id, +}; diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h new file mode 100644 index 00000000000..9e443ee3055 --- /dev/null +++ b/drivers/media/video/mt9v011.h @@ -0,0 +1,35 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#ifndef MT9V011_H_ +#define MT9V011_H_ + +#define R00_MT9V011_CHIP_VERSION 0x00 +#define R01_MT9V011_ROWSTART 0x01 +#define R02_MT9V011_COLSTART 0x02 +#define R03_MT9V011_HEIGHT 0x03 +#define R04_MT9V011_WIDTH 0x04 +#define R05_MT9V011_HBLANK 0x05 +#define R06_MT9V011_VBLANK 0x06 +#define R07_MT9V011_OUT_CTRL 0x07 +#define R09_MT9V011_SHUTTER_WIDTH 0x09 +#define R0A_MT9V011_CLK_SPEED 0x0a +#define R0B_MT9V011_RESTART 0x0b +#define R0C_MT9V011_SHUTTER_DELAY 0x0c +#define R0D_MT9V011_RESET 0x0d +#define R1E_MT9V011_DIGITAL_ZOOM 0x1e +#define R20_MT9V011_READ_MODE 0x20 +#define R2B_MT9V011_GREEN_1_GAIN 0x2b +#define R2C_MT9V011_BLUE_GAIN 0x2c +#define R2D_MT9V011_RED_GAIN 0x2d +#define R2E_MT9V011_GREEN_2_GAIN 0x2e +#define R35_MT9V011_GLOBAL_GAIN 0x35 +#define RF1_MT9V011_CHIP_ENABLE 0xf1 + +#define MT9V011_VERSION 0x8243 + +#endif diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 16f595d4337..9f5ae816785 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -237,11 +237,11 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd) return -ENOMEM; icd->num_user_formats = fmts; - fmts = 0; dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts); /* Second pass - actually fill data formats */ + fmts = 0; for (i = 0; i < icd->num_formats; i++) if (!ici->ops->get_formats) { icd->user_formats[i].host_fmt = icd->formats + i; @@ -877,8 +877,11 @@ static int soc_camera_probe(struct device *dev) (unsigned short)~0; ret = soc_camera_init_user_formats(icd); - if (ret < 0) + if (ret < 0) { + if (icd->ops->remove) + icd->ops->remove(icd); goto eiufmt; + } icd->height = DEFAULT_HEIGHT; icd->width = DEFAULT_WIDTH; @@ -902,8 +905,10 @@ static int soc_camera_remove(struct device *dev) { struct soc_camera_device *icd = to_soc_camera_dev(dev); + mutex_lock(&icd->video_lock); if (icd->ops->remove) icd->ops->remove(icd); + mutex_unlock(&icd->video_lock); soc_camera_free_user_formats(icd); @@ -1145,6 +1150,7 @@ evidallocd: } EXPORT_SYMBOL(soc_camera_video_start); +/* Called from client .remove() methods with .video_lock held */ void soc_camera_video_stop(struct soc_camera_device *icd) { struct video_device *vdev = icd->vdev; @@ -1154,10 +1160,8 @@ void soc_camera_video_stop(struct soc_camera_device *icd) if (!icd->dev.parent || !vdev) return; - mutex_lock(&icd->video_lock); video_unregister_device(vdev); icd->vdev = NULL; - mutex_unlock(&icd->video_lock); } EXPORT_SYMBOL(soc_camera_video_stop); diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index cd726685846..7705fc6baf0 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -343,6 +343,53 @@ static struct bar_std bars[] = { #define TO_U(r, g, b) \ (((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128) +/* precalculate color bar values to speed up rendering */ +static void precalculate_bars(struct vivi_fh *fh) +{ + struct vivi_dev *dev = fh->dev; + unsigned char r, g, b; + int k, is_yuv; + + fh->input = dev->input; + + for (k = 0; k < 8; k++) { + r = bars[fh->input].bar[k][0]; + g = bars[fh->input].bar[k][1]; + b = bars[fh->input].bar[k][2]; + is_yuv = 0; + + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + is_yuv = 1; + break; + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_RGB565X: + r >>= 3; + g >>= 2; + b >>= 3; + break; + case V4L2_PIX_FMT_RGB555: + case V4L2_PIX_FMT_RGB555X: + r >>= 3; + g >>= 3; + b >>= 3; + break; + } + + if (is_yuv) { + fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ + fh->bars[k][1] = TO_U(r, g, b); /* Cb */ + fh->bars[k][2] = TO_V(r, g, b); /* Cr */ + } else { + fh->bars[k][0] = r; + fh->bars[k][1] = g; + fh->bars[k][2] = b; + } + } + +} + #define TSTAMP_MIN_Y 24 #define TSTAMP_MAX_Y (TSTAMP_MIN_Y + 15) #define TSTAMP_INPUT_X 10 @@ -755,6 +802,8 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, buf->vb.height = fh->height; buf->vb.field = field; + precalculate_bars(fh); + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { rc = videobuf_iolock(vq, &buf->vb, NULL); if (rc < 0) @@ -893,53 +942,6 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } -/* precalculate color bar values to speed up rendering */ -static void precalculate_bars(struct vivi_fh *fh) -{ - struct vivi_dev *dev = fh->dev; - unsigned char r, g, b; - int k, is_yuv; - - fh->input = dev->input; - - for (k = 0; k < 8; k++) { - r = bars[fh->input].bar[k][0]; - g = bars[fh->input].bar[k][1]; - b = bars[fh->input].bar[k][2]; - is_yuv = 0; - - switch (fh->fmt->fourcc) { - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: - is_yuv = 1; - break; - case V4L2_PIX_FMT_RGB565: - case V4L2_PIX_FMT_RGB565X: - r >>= 3; - g >>= 2; - b >>= 3; - break; - case V4L2_PIX_FMT_RGB555: - case V4L2_PIX_FMT_RGB555X: - r >>= 3; - g >>= 3; - b >>= 3; - break; - } - - if (is_yuv) { - fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ - fh->bars[k][1] = TO_U(r, g, b); /* Cb */ - fh->bars[k][2] = TO_V(r, g, b); /* Cr */ - } else { - fh->bars[k][0] = r; - fh->bars[k][1] = g; - fh->bars[k][2] = b; - } - } - -} - /*FIXME: This seems to be generic enough to be at videodev2 */ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) @@ -965,8 +967,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, fh->vb_vidq.field = f->fmt.pix.field; fh->type = f->type; - precalculate_bars(fh); - ret = 0; out: mutex_unlock(&q->vb_lock); @@ -1357,6 +1357,7 @@ static int __init vivi_create_instance(int inst) goto unreg_dev; *vfd = vivi_template; + vfd->debug = debug; ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); if (ret < 0) |