diff options
Diffstat (limited to 'drivers/w1')
-rw-r--r-- | drivers/w1/masters/ds1wm.c | 52 | ||||
-rw-r--r-- | drivers/w1/masters/ds2482.c | 51 | ||||
-rw-r--r-- | drivers/w1/masters/mxc_w1.c | 49 | ||||
-rw-r--r-- | drivers/w1/masters/w1-gpio.c | 2 | ||||
-rw-r--r-- | drivers/w1/slaves/w1_therm.c | 36 |
5 files changed, 90 insertions, 100 deletions
diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c index 7c294f4dc0e..96cab6ac2b4 100644 --- a/drivers/w1/masters/ds1wm.c +++ b/drivers/w1/masters/ds1wm.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/interrupt.h> +#include <linux/io.h> #include <linux/irq.h> #include <linux/pm.h> #include <linux/platform_device.h> @@ -459,43 +460,34 @@ static int ds1wm_probe(struct platform_device *pdev) if (!pdev) return -ENODEV; - ds1wm_data = kzalloc(sizeof(*ds1wm_data), GFP_KERNEL); + ds1wm_data = devm_kzalloc(&pdev->dev, sizeof(*ds1wm_data), GFP_KERNEL); if (!ds1wm_data) return -ENOMEM; platform_set_drvdata(pdev, ds1wm_data); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENXIO; - goto err0; - } - ds1wm_data->map = ioremap(res->start, resource_size(res)); - if (!ds1wm_data->map) { - ret = -ENOMEM; - goto err0; - } + if (!res) + return -ENXIO; + ds1wm_data->map = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!ds1wm_data->map) + return -ENOMEM; /* calculate bus shift from mem resource */ ds1wm_data->bus_shift = resource_size(res) >> 3; ds1wm_data->pdev = pdev; ds1wm_data->cell = mfd_get_cell(pdev); - if (!ds1wm_data->cell) { - ret = -ENODEV; - goto err1; - } + if (!ds1wm_data->cell) + return -ENODEV; plat = pdev->dev.platform_data; - if (!plat) { - ret = -ENODEV; - goto err1; - } + if (!plat) + return -ENODEV; res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - ret = -ENXIO; - goto err1; - } + if (!res) + return -ENXIO; ds1wm_data->irq = res->start; ds1wm_data->int_en_reg_none = (plat->active_high ? DS1WM_INTEN_IAS : 0); ds1wm_data->reset_recover_delay = plat->reset_recover_delay; @@ -505,10 +497,10 @@ static int ds1wm_probe(struct platform_device *pdev) if (res->flags & IORESOURCE_IRQ_LOWEDGE) irq_set_irq_type(ds1wm_data->irq, IRQ_TYPE_EDGE_FALLING); - ret = request_irq(ds1wm_data->irq, ds1wm_isr, + ret = devm_request_irq(&pdev->dev, ds1wm_data->irq, ds1wm_isr, IRQF_DISABLED | IRQF_SHARED, "ds1wm", ds1wm_data); if (ret) - goto err1; + return ret; ds1wm_up(ds1wm_data); @@ -516,17 +508,12 @@ static int ds1wm_probe(struct platform_device *pdev) ret = w1_add_master_device(&ds1wm_master); if (ret) - goto err2; + goto err; return 0; -err2: +err: ds1wm_down(ds1wm_data); - free_irq(ds1wm_data->irq, ds1wm_data); -err1: - iounmap(ds1wm_data->map); -err0: - kfree(ds1wm_data); return ret; } @@ -560,9 +547,6 @@ static int ds1wm_remove(struct platform_device *pdev) w1_remove_master_device(&ds1wm_master); ds1wm_down(ds1wm_data); - free_irq(ds1wm_data->irq, ds1wm_data); - iounmap(ds1wm_data->map); - kfree(ds1wm_data); return 0; } diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c index 6429b9e9fb8..e033491fe30 100644 --- a/drivers/w1/masters/ds2482.c +++ b/drivers/w1/masters/ds2482.c @@ -51,10 +51,10 @@ * The top 4 bits always read 0. * To write, the top nibble must be the 1's compl. of the low nibble. */ -#define DS2482_REG_CFG_1WS 0x08 -#define DS2482_REG_CFG_SPU 0x04 -#define DS2482_REG_CFG_PPM 0x02 -#define DS2482_REG_CFG_APU 0x01 +#define DS2482_REG_CFG_1WS 0x08 /* 1-wire speed */ +#define DS2482_REG_CFG_SPU 0x04 /* strong pull-up */ +#define DS2482_REG_CFG_PPM 0x02 /* presence pulse masking */ +#define DS2482_REG_CFG_APU 0x01 /* active pull-up */ /** @@ -132,6 +132,17 @@ struct ds2482_data { /** + * Helper to calculate values for configuration register + * @param conf the raw config value + * @return the value w/ complements that can be written to register + */ +static inline u8 ds2482_calculate_config(u8 conf) +{ + return conf | ((~conf & 0x0f) << 4); +} + + +/** * Sets the read pointer. * @param pdev The ds2482 client pointer * @param read_ptr see DS2482_PTR_CODE_xxx above @@ -399,7 +410,7 @@ static u8 ds2482_w1_reset_bus(void *data) /* If the chip did reset since detect, re-config it */ if (err & DS2482_REG_STS_RST) ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, - 0xF0); + ds2482_calculate_config(0x00)); } mutex_unlock(&pdev->access_lock); @@ -407,6 +418,32 @@ static u8 ds2482_w1_reset_bus(void *data) return retval; } +static u8 ds2482_w1_set_pullup(void *data, int delay) +{ + struct ds2482_w1_chan *pchan = data; + struct ds2482_data *pdev = pchan->pdev; + u8 retval = 1; + + /* if delay is non-zero activate the pullup, + * the strong pullup will be automatically deactivated + * by the master, so do not explicitly deactive it + */ + if (delay) { + /* both waits are crucial, otherwise devices might not be + * powered long enough, causing e.g. a w1_therm sensor to + * provide wrong conversion results + */ + ds2482_wait_1wire_idle(pdev); + /* note: it seems like both SPU and APU have to be set! */ + retval = ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, + ds2482_calculate_config(DS2482_REG_CFG_SPU | + DS2482_REG_CFG_APU)); + ds2482_wait_1wire_idle(pdev); + } + + return retval; +} + static int ds2482_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -452,7 +489,8 @@ static int ds2482_probe(struct i2c_client *client, data->w1_count = 8; /* Set all config items to 0 (off) */ - ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, 0xF0); + ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, + ds2482_calculate_config(0x00)); mutex_init(&data->access_lock); @@ -468,6 +506,7 @@ static int ds2482_probe(struct i2c_client *client, data->w1_ch[idx].w1_bm.touch_bit = ds2482_w1_touch_bit; data->w1_ch[idx].w1_bm.triplet = ds2482_w1_triplet; data->w1_ch[idx].w1_bm.reset_bus = ds2482_w1_reset_bus; + data->w1_ch[idx].w1_bm.set_pullup = ds2482_w1_set_pullup; err = w1_add_master_device(&data->w1_ch[idx].w1_bm); if (err) { diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c index 708a25fc996..372c8c0d54a 100644 --- a/drivers/w1/masters/mxc_w1.c +++ b/drivers/w1/masters/mxc_w1.c @@ -109,34 +109,21 @@ static int mxc_w1_probe(struct platform_device *pdev) struct resource *res; int err = 0; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - mdev = kzalloc(sizeof(struct mxc_w1_device), GFP_KERNEL); + mdev = devm_kzalloc(&pdev->dev, sizeof(struct mxc_w1_device), + GFP_KERNEL); if (!mdev) return -ENOMEM; - mdev->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(mdev->clk)) { - err = PTR_ERR(mdev->clk); - goto failed_clk; - } + mdev->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(mdev->clk)) + return PTR_ERR(mdev->clk); mdev->clkdiv = (clk_get_rate(mdev->clk) / 1000000) - 1; - res = request_mem_region(res->start, resource_size(res), - "mxc_w1"); - if (!res) { - err = -EBUSY; - goto failed_req; - } - - mdev->regs = ioremap(res->start, resource_size(res)); - if (!mdev->regs) { - dev_err(&pdev->dev, "Cannot map mxc_w1 registers\n"); - goto failed_ioremap; - } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mdev->regs = devm_request_and_ioremap(&pdev->dev, res); + if (!mdev->regs) + return -EBUSY; clk_prepare_enable(mdev->clk); __raw_writeb(mdev->clkdiv, mdev->regs + MXC_W1_TIME_DIVIDER); @@ -148,20 +135,10 @@ static int mxc_w1_probe(struct platform_device *pdev) err = w1_add_master_device(&mdev->bus_master); if (err) - goto failed_add; + return err; platform_set_drvdata(pdev, mdev); return 0; - -failed_add: - iounmap(mdev->regs); -failed_ioremap: - release_mem_region(res->start, resource_size(res)); -failed_req: - clk_put(mdev->clk); -failed_clk: - kfree(mdev); - return err; } /* @@ -170,16 +147,10 @@ failed_clk: static int mxc_w1_remove(struct platform_device *pdev) { struct mxc_w1_device *mdev = platform_get_drvdata(pdev); - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); w1_remove_master_device(&mdev->bus_master); - iounmap(mdev->regs); - release_mem_region(res->start, resource_size(res)); clk_disable_unprepare(mdev->clk); - clk_put(mdev->clk); platform_set_drvdata(pdev, NULL); diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c index 85b363a5bd0..d39dfa4cc23 100644 --- a/drivers/w1/masters/w1-gpio.c +++ b/drivers/w1/masters/w1-gpio.c @@ -72,7 +72,7 @@ static int w1_gpio_probe_dt(struct platform_device *pdev) return 0; } -static int __init w1_gpio_probe(struct platform_device *pdev) +static int w1_gpio_probe(struct platform_device *pdev) { struct w1_bus_master *master; struct w1_gpio_platform_data *pdata; diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index 92d08e7fcba..c1a702f8c80 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -41,14 +41,18 @@ MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, temperature famil * If it was disabled a parasite powered device might not get the require * current to do a temperature conversion. If it is enabled parasite powered * devices have a better chance of getting the current required. + * In case the parasite power-detection is not working (seems to be the case + * for some DS18S20) the strong pullup can also be forced, regardless of the + * power state of the devices. + * + * Summary of options: + * - strong_pullup = 0 Disable strong pullup completely + * - strong_pullup = 1 Enable automatic strong pullup detection + * - strong_pullup = 2 Force strong pullup */ static int w1_strong_pullup = 1; module_param_named(strong_pullup, w1_strong_pullup, int, 0); -static u8 bad_roms[][9] = { - {0xaa, 0x00, 0x4b, 0x46, 0xff, 0xff, 0x0c, 0x10, 0x87}, - {} - }; static ssize_t w1_therm_read(struct device *device, struct device_attribute *attr, char *buf); @@ -168,16 +172,6 @@ static inline int w1_convert_temp(u8 rom[9], u8 fid) return 0; } -static int w1_therm_check_rom(u8 rom[9]) -{ - int i; - - for (i=0; i<sizeof(bad_roms)/9; ++i) - if (!memcmp(bad_roms[i], rom, 9)) - return 1; - - return 0; -} static ssize_t w1_therm_read(struct device *device, struct device_attribute *attr, char *buf) @@ -194,10 +188,11 @@ static ssize_t w1_therm_read(struct device *device, memset(rom, 0, sizeof(rom)); - verdict = 0; - crc = 0; - while (max_trying--) { + + verdict = 0; + crc = 0; + if (!w1_reset_select_slave(sl)) { int count = 0; unsigned int tm = 750; @@ -210,7 +205,8 @@ static ssize_t w1_therm_read(struct device *device, continue; /* 750ms strong pullup (or delay) after the convert */ - if (!external_power && w1_strong_pullup) + if (w1_strong_pullup == 2 || + (!external_power && w1_strong_pullup)) w1_next_pullup(dev, tm); w1_write_8(dev, W1_CONVERT_TEMP); @@ -249,7 +245,7 @@ static ssize_t w1_therm_read(struct device *device, } } - if (!w1_therm_check_rom(rom)) + if (verdict) break; } @@ -260,7 +256,7 @@ static ssize_t w1_therm_read(struct device *device, if (verdict) memcpy(sl->rom, rom, sizeof(sl->rom)); else - dev_warn(device, "18S20 doesn't respond to CONVERT_TEMP.\n"); + dev_warn(device, "Read failed CRC check\n"); for (i = 0; i < 9; ++i) c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ", sl->rom[i]); |