diff options
Diffstat (limited to 'drivers/video')
121 files changed, 23059 insertions, 374 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6b89eb55ed3..5a5c303a637 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -614,6 +614,21 @@ config FB_BFIN_T350MCQB This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK. +config FB_BFIN_LQ035Q1 + tristate "SHARP LQ035Q1DH02 TFT LCD" + depends on FB && BLACKFIN && SPI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select BFIN_GPTIMERS + help + This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on + the Blackfin Landscape LCD EZ-Extender Card. + This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI + It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK. + + To compile this driver as a module, choose M here: the + module will be called bfin-lq035q1-fb. config FB_STI tristate "HP STI frame buffer device support" @@ -2066,6 +2081,7 @@ config XEN_FBDEV_FRONTEND select FB_SYS_IMAGEBLIT select FB_SYS_FOPS select FB_DEFERRED_IO + select XEN_XENBUS_FRONTEND default y help This driver implements the front-end of the Xen virtual @@ -2130,7 +2146,7 @@ config FB_PRE_INIT_FB the bootloader. config FB_MSM - tristate + tristate "MSM Framebuffer support" depends on FB && ARCH_MSM select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -2164,6 +2180,7 @@ config FB_BROADSHEET a bridge adapter. source "drivers/video/omap/Kconfig" +source "drivers/video/omap2/Kconfig" source "drivers/video/backlight/Kconfig" source "drivers/video/display/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 80232e12488..4ecb30c4f3f 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -124,6 +124,7 @@ obj-$(CONFIG_FB_SM501) += sm501fb.o obj-$(CONFIG_FB_XILINX) += xilinxfb.o obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o obj-$(CONFIG_FB_OMAP) += omap/ +obj-y += omap2/ obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o obj-$(CONFIG_FB_CARMINE) += carminefb.o obj-$(CONFIG_FB_MB862XX) += mb862xx/ @@ -136,6 +137,7 @@ obj-$(CONFIG_FB_EFI) += efifb.o obj-$(CONFIG_FB_VGA16) += vga16fb.o obj-$(CONFIG_FB_OF) += offb.o obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o +obj-$(CONFIG_FB_BFIN_LQ035Q1) += bfin-lq035q1-fb.o obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o obj-$(CONFIG_FB_MX3) += mx3fb.o obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c index ad05da5ba3c..86d95c228ad 100644 --- a/drivers/video/backlight/adp5520_bl.c +++ b/drivers/video/backlight/adp5520_bl.c @@ -15,7 +15,7 @@ struct adp5520_bl { struct device *master; - struct adp5520_backlight_platfrom_data *pdata; + struct adp5520_backlight_platform_data *pdata; struct mutex lock; unsigned long cached_daylight_max; int id; @@ -31,29 +31,30 @@ static int adp5520_bl_set(struct backlight_device *bl, int brightness) if (data->pdata->en_ambl_sens) { if ((brightness > 0) && (brightness < ADP5020_MAX_BRIGHTNESS)) { /* Disable Ambient Light auto adjust */ - ret |= adp5520_clr_bits(master, BL_CONTROL, - BL_AUTO_ADJ); - ret |= adp5520_write(master, DAYLIGHT_MAX, brightness); + ret |= adp5520_clr_bits(master, ADP5520_BL_CONTROL, + ADP5520_BL_AUTO_ADJ); + ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, + brightness); } else { /* * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust * restore daylight l3 sysfs brightness */ - ret |= adp5520_write(master, DAYLIGHT_MAX, + ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, data->cached_daylight_max); - ret |= adp5520_set_bits(master, BL_CONTROL, - BL_AUTO_ADJ); + ret |= adp5520_set_bits(master, ADP5520_BL_CONTROL, + ADP5520_BL_AUTO_ADJ); } } else { - ret |= adp5520_write(master, DAYLIGHT_MAX, brightness); + ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, brightness); } if (data->current_brightness && brightness == 0) ret |= adp5520_set_bits(master, - MODE_STATUS, DIM_EN); + ADP5520_MODE_STATUS, ADP5520_DIM_EN); else if (data->current_brightness == 0 && brightness) ret |= adp5520_clr_bits(master, - MODE_STATUS, DIM_EN); + ADP5520_MODE_STATUS, ADP5520_DIM_EN); if (!ret) data->current_brightness = brightness; @@ -79,12 +80,12 @@ static int adp5520_bl_get_brightness(struct backlight_device *bl) int error; uint8_t reg_val; - error = adp5520_read(data->master, BL_VALUE, ®_val); + error = adp5520_read(data->master, ADP5520_BL_VALUE, ®_val); retu |