diff options
Diffstat (limited to 'drivers/video/omap2/displays/panel-picodlp.h')
| -rw-r--r-- | drivers/video/omap2/displays/panel-picodlp.h | 288 |
1 files changed, 288 insertions, 0 deletions
diff --git a/drivers/video/omap2/displays/panel-picodlp.h b/drivers/video/omap2/displays/panel-picodlp.h new file mode 100644 index 00000000000..a34b431a726 --- /dev/null +++ b/drivers/video/omap2/displays/panel-picodlp.h @@ -0,0 +1,288 @@ +/* + * Header file required by picodlp panel driver + * + * Copyright (C) 2009-2011 Texas Instruments + * Author: Mythri P K <mythripk@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef __OMAP2_DISPLAY_PANEL_PICODLP_H +#define __OMAP2_DISPLAY_PANEL_PICODLP_H + +/* Commands used for configuring picodlp panel */ + +#define MAIN_STATUS 0x03 +#define PBC_CONTROL 0x08 +#define INPUT_SOURCE 0x0B +#define INPUT_RESOLUTION 0x0C +#define DATA_FORMAT 0x0D +#define IMG_ROTATION 0x0E +#define LONG_FLIP 0x0F +#define SHORT_FLIP 0x10 +#define TEST_PAT_SELECT 0x11 +#define R_DRIVE_CURRENT 0x12 +#define G_DRIVE_CURRENT 0x13 +#define B_DRIVE_CURRENT 0x14 +#define READ_REG_SELECT 0x15 +#define RGB_DRIVER_ENABLE 0x16 + +#define CPU_IF_MODE 0x18 +#define FRAME_RATE 0x19 +#define CPU_IF_SYNC_METHOD 0x1A +#define CPU_IF_SOF 0x1B +#define CPU_IF_EOF 0x1C +#define CPU_IF_SLEEP 0x1D + +#define SEQUENCE_MODE 0x1E +#define SOFT_RESET 0x1F +#define FRONT_END_RESET 0x21 +#define AUTO_PWR_ENABLE 0x22 + +#define VSYNC_LINE_DELAY 0x23 +#define CPU_PI_HORIZ_START 0x24 +#define CPU_PI_VERT_START 0x25 +#define CPU_PI_HORIZ_WIDTH 0x26 +#define CPU_PI_VERT_HEIGHT 0x27 + +#define PIXEL_MASK_CROP 0x28 +#define CROP_FIRST_LINE 0x29 +#define CROP_LAST_LINE 0x2A +#define CROP_FIRST_PIXEL 0x2B +#define CROP_LAST_PIXEL 0x2C +#define DMD_PARK_TRIGGER 0x2D + +#define MISC_REG 0x30 + +/* AGC registers */ +#define AGC_CTRL 0x50 +#define AGC_CLIPPED_PIXS 0x55 +#define AGC_BRIGHT_PIXS 0x56 +#define AGC_BG_PIXS 0x57 +#define AGC_SAFETY_MARGIN 0x17 + +/* Color Coordinate Adjustment registers */ +#define CCA_ENABLE 0x5E +#define CCA_C1A 0x5F +#define CCA_C1B 0x60 +#define CCA_C1C 0x61 +#define CCA_C2A 0x62 +#define CCA_C2B 0x63 +#define CCA_C2C 0x64 +#define CCA_C3A 0x65 +#define CCA_C3B 0x66 +#define CCA_C3C 0x67 +#define CCA_C7A 0x71 +#define CCA_C7B 0x72 +#define CCA_C7C 0x73 + +/** + * DLP Pico Processor 2600 comes with flash + * We can do DMA operations from flash for accessing Look Up Tables + */ +#define DMA_STATUS 0x100 +#define FLASH_ADDR_BYTES 0x74 +#define FLASH_DUMMY_BYTES 0x75 +#define FLASH_WRITE_BYTES 0x76 +#define FLASH_READ_BYTES 0x77 +#define FLASH_OPCODE 0x78 +#define FLASH_START_ADDR 0x79 +#define FLASH_DUMMY2 0x7A +#define FLASH_WRITE_DATA 0x7B + +#define TEMPORAL_DITH_DISABLE 0x7E +#define SEQ_CONTROL 0x82 +#define SEQ_VECTOR 0x83 + +/* DMD is Digital Micromirror Device */ +#define DMD_BLOCK_COUNT 0x84 +#define DMD_VCC_CONTROL 0x86 +#define DMD_PARK_PULSE_COUNT 0x87 +#define DMD_PARK_PULSE_WIDTH 0x88 +#define DMD_PARK_DELAY 0x89 +#define DMD_SHADOW_ENABLE 0x8E +#define SEQ_STATUS 0x8F +#define FLASH_CLOCK_CONTROL 0x98 +#define DMD_PARK 0x2D + +#define SDRAM_BIST_ENABLE 0x46 +#define DDR_DRIVER_STRENGTH 0x9A +#define SDC_ENABLE 0x9D +#define SDC_BUFF_SWAP_DISABLE 0xA3 +#define CURTAIN_CONTROL 0xA6 +#define DDR_BUS_SWAP_ENABLE 0xA7 +#define DMD_TRC_ENABLE 0xA8 +#define DMD_BUS_SWAP_ENABLE 0xA9 + +#define ACTGEN_ENABLE 0xAE +#define ACTGEN_CONTROL 0xAF +#define ACTGEN_HORIZ_BP 0xB0 +#define ACTGEN_VERT_BP 0xB1 + +/* Look Up Table access */ +#define CMT_SPLASH_LUT_START_ADDR 0xFA +#define CMT_SPLASH_LUT_DEST_SELECT 0xFB +#define CMT_SPLASH_LUT_DATA 0xFC +#define SEQ_RESET_LUT_START_ADDR 0xFD +#define SEQ_RESET_LUT_DEST_SELECT 0xFE +#define SEQ_RESET_LUT_DATA 0xFF + +/* Input source definitions */ +#define PARALLEL_RGB 0 +#define INT_TEST_PATTERN 1 +#define SPLASH_SCREEN 2 +#define CPU_INTF 3 +#define BT656 4 + +/* Standard input resolution definitions */ +#define QWVGA_LANDSCAPE 3 /* (427h*240v) */ +#define WVGA_864_LANDSCAPE 21 /* (864h*480v) */ +#define WVGA_DMD_OPTICAL_TEST 35 /* (608h*684v) */ + +/* Standard data format definitions */ +#define RGB565 0 +#define RGB666 1 +#define RGB888 2 + +/* Test Pattern definitions */ +#define TPG_CHECKERBOARD 0 +#define TPG_BLACK 1 +#define TPG_WHITE 2 +#define TPG_RED 3 +#define TPG_BLUE 4 +#define TPG_GREEN 5 +#define TPG_VLINES_BLACK 6 +#define TPG_HLINES_BLACK 7 +#define TPG_VLINES_ALT 8 +#define TPG_HLINES_ALT 9 +#define TPG_DIAG_LINES 10 +#define TPG_GREYRAMP_VERT 11 +#define TPG_GREYRAMP_HORIZ 12 +#define TPG_ANSI_CHECKERBOARD 13 + +/* sequence mode definitions */ +#define SEQ_FREE_RUN 0 +#define SEQ_LOCK 1 + +/* curtain color definitions */ +#define CURTAIN_BLACK 0 +#define CURTAIN_RED 1 +#define CURTAIN_GREEN 2 +#define CURTAIN_BLUE 3 +#define CURTAIN_YELLOW 4 +#define CURTAIN_MAGENTA 5 +#define CURTAIN_CYAN 6 +#define CURTAIN_WHITE 7 + +/* LUT definitions */ +#define CMT_LUT_NONE 0 +#define CMT_LUT_GREEN 1 +#define CMT_LUT_RED 2 +#define CMT_LUT_BLUE 3 +#define CMT_LUT_ALL 4 +#define SPLASH_LUT 5 + +#define SEQ_LUT_NONE 0 +#define SEQ_DRC_LUT_0 1 +#define SEQ_DRC_LUT_1 2 +#define SEQ_DRC_LUT_2 3 +#define SEQ_DRC_LUT_3 4 +#define SEQ_SEQ_LUT 5 +#define SEQ_DRC_LUT_ALL 6 +#define WPC_PROGRAM_LUT 7 + +#define BITSTREAM_START_ADDR 0x00000000 +#define BITSTREAM_SIZE 0x00040000 + +#define WPC_FW_0_START_ADDR 0x00040000 +#define WPC_FW_0_SIZE 0x00000ce8 + +#define SEQUENCE_0_START_ADDR 0x00044000 +#define SEQUENCE_0_SIZE 0x00001000 + +#define SEQUENCE_1_START_ADDR 0x00045000 +#define SEQUENCE_1_SIZE 0x00000d10 + +#define SEQUENCE_2_START_ADDR 0x00046000 +#define SEQUENCE_2_SIZE 0x00000d10 + +#define SEQUENCE_3_START_ADDR 0x00047000 +#define SEQUENCE_3_SIZE 0x00000d10 + +#define SEQUENCE_4_START_ADDR 0x00048000 +#define SEQUENCE_4_SIZE 0x00000d10 + +#define SEQUENCE_5_START_ADDR 0x00049000 +#define SEQUENCE_5_SIZE 0x00000d10 + +#define SEQUENCE_6_START_ADDR 0x0004a000 +#define SEQUENCE_6_SIZE 0x00000d10 + +#define CMT_LUT_0_START_ADDR 0x0004b200 +#define CMT_LUT_0_SIZE 0x00000600 + +#define CMT_LUT_1_START_ADDR 0x0004b800 +#define CMT_LUT_1_SIZE 0x00000600 + +#define CMT_LUT_2_START_ADDR 0x0004be00 +#define CMT_LUT_2_SIZE 0x00000600 + +#define CMT_LUT_3_START_ADDR 0x0004c400 +#define CMT_LUT_3_SIZE 0x00000600 + +#define CMT_LUT_4_START_ADDR 0x0004ca00 +#define CMT_LUT_4_SIZE 0x00000600 + +#define CMT_LUT_5_START_ADDR 0x0004d000 +#define CMT_LUT_5_SIZE 0x00000600 + +#define CMT_LUT_6_START_ADDR 0x0004d600 +#define CMT_LUT_6_SIZE 0x00000600 + +#define DRC_TABLE_0_START_ADDR 0x0004dc00 +#define DRC_TABLE_0_SIZE 0x00000100 + +#define SPLASH_0_START_ADDR 0x0004dd00 +#define SPLASH_0_SIZE 0x00032280 + +#define SEQUENCE_7_START_ADDR 0x00080000 +#define SEQUENCE_7_SIZE 0x00000d10 + +#define SEQUENCE_8_START_ADDR 0x00081800 +#define SEQUENCE_8_SIZE 0x00000d10 + +#define SEQUENCE_9_START_ADDR 0x00083000 +#define SEQUENCE_9_SIZE 0x00000d10 + +#define CMT_LUT_7_START_ADDR 0x0008e000 +#define CMT_LUT_7_SIZE 0x00000600 + +#define CMT_LUT_8_START_ADDR 0x0008e800 +#define CMT_LUT_8_SIZE 0x00000600 + +#define CMT_LUT_9_START_ADDR 0x0008f000 +#define CMT_LUT_9_SIZE 0x00000600 + +#define SPLASH_1_START_ADDR 0x0009a000 +#define SPLASH_1_SIZE 0x00032280 + +#define SPLASH_2_START_ADDR 0x000cd000 +#define SPLASH_2_SIZE 0x00032280 + +#define SPLASH_3_START_ADDR 0x00100000 +#define SPLASH_3_SIZE 0x00032280 + +#define OPT_SPLASH_0_START_ADDR 0x00134000 +#define OPT_SPLASH_0_SIZE 0x000cb100 + +#endif |