1 files changed, 133 insertions, 0 deletions
diff --git a/drivers/video/fbdev/omap/lcd_osk.c b/drivers/video/fbdev/omap/lcd_osk.c
new file mode 100644
index 00000000000..7fbe04bce0e
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_osk.c
@@ -0,0 +1,133 @@
+/*
+ * LCD panel support for the TI OMAP OSK board
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ * Adapted for OSK by <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/mux.h>
+
+#include "omapfb.h"
+
+static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
+{
+	/* gpio2 was allocated in board init */
+	return 0;
+}
+
+static void osk_panel_cleanup(struct lcd_panel *panel)
+{
+}
+
+static int osk_panel_enable(struct lcd_panel *panel)
+{
+	/* configure PWL pin */
+	omap_cfg_reg(PWL);
+
+	/* Enable PWL unit */
+	omap_writeb(0x01, OMAP_PWL_CLK_ENABLE);
+
+	/* Set PWL level */
+	omap_writeb(0xFF, OMAP_PWL_ENABLE);
+
+	/* set GPIO2 high (lcd power enabled) */
+	gpio_set_value(2, 1);
+
+	return 0;
+}
+
+static void osk_panel_disable(struct lcd_panel *panel)
+{
+	/* Set PWL level to zero */
+	omap_writeb(0x00, OMAP_PWL_ENABLE);
+
+	/* Disable PWL unit */
+	omap_writeb(0x00, OMAP_PWL_CLK_ENABLE);
+
+	/* set GPIO2 low */
+	gpio_set_value(2, 0);
+}
+
+static unsigned long osk_panel_get_caps(struct lcd_panel *panel)
+{
+	return 0;
+}
+
+struct lcd_panel osk_panel = {
+	.name		= "osk",
+	.config		= OMAP_LCDC_PANEL_TFT,
+
+	.bpp		= 16,
+	.data_lines	= 16,
+	.x_res		= 240,
+	.y_res		= 320,
+	.pixel_clock	= 12500,
+	.hsw		= 40,
+	.hfp		= 40,
+	.hbp		= 72,
+	.vsw		= 1,
+	.vfp		= 1,
+	.vbp		= 0,
+	.pcd		= 12,
+
+	.init		= osk_panel_init,
+	.cleanup	= osk_panel_cleanup,
+	.enable		= osk_panel_enable,
+	.disable	= osk_panel_disable,
+	.get_caps	= osk_panel_get_caps,
+};
+
+static int osk_panel_probe(struct platform_device *pdev)
+{
+	omapfb_register_panel(&osk_panel);
+	return 0;
+}
+
+static int osk_panel_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int osk_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	return 0;
+}
+
+static int osk_panel_resume(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver osk_panel_driver = {
+	.probe		= osk_panel_probe,
+	.remove		= osk_panel_remove,
+	.suspend	= osk_panel_suspend,
+	.resume		= osk_panel_resume,
+	.driver		= {
+		.name	= "lcd_osk",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(osk_panel_driver);