diff options
Diffstat (limited to 'drivers/uwb/i1480/i1480u-wlp/lc.c')
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/lc.c | 424 |
1 files changed, 0 insertions, 424 deletions
diff --git a/drivers/uwb/i1480/i1480u-wlp/lc.c b/drivers/uwb/i1480/i1480u-wlp/lc.c deleted file mode 100644 index def778cf221..00000000000 --- a/drivers/uwb/i1480/i1480u-wlp/lc.c +++ /dev/null @@ -1,424 +0,0 @@ -/* - * WUSB Wire Adapter: WLP interface - * Driver for the Linux Network stack. - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - * - * This implements a very simple network driver for the WLP USB - * device that is associated to a UWB (Ultra Wide Band) host. - * - * This is seen as an interface of a composite device. Once the UWB - * host has an association to another WLP capable device, the - * networking interface (aka WLP) can start to send packets back and - * forth. - * - * Limitations: - * - * - Hand cranked; can't ifup the interface until there is an association - * - * - BW allocation very simplistic [see i1480u_mas_set() and callees]. - * - * - * ROADMAP: - * - * ENTRY POINTS (driver model): - * - * i1480u_driver_{exit,init}(): initialization of the driver. - * - * i1480u_probe(): called by the driver code when a device - * matching 'i1480u_id_table' is connected. - * - * This allocs a netdev instance, inits with - * i1480u_add(), then registers_netdev(). - * i1480u_init() - * i1480u_add() - * - * i1480u_disconnect(): device has been disconnected/module - * is being removed. - * i1480u_rm() - */ -#include <linux/gfp.h> -#include <linux/if_arp.h> -#include <linux/etherdevice.h> - -#include "i1480u-wlp.h" - - - -static inline -void i1480u_init(struct i1480u *i1480u) -{ - /* nothing so far... doesn't it suck? */ - spin_lock_init(&i1480u->lock); - INIT_LIST_HEAD(&i1480u->tx_list); - spin_lock_init(&i1480u->tx_list_lock); - wlp_options_init(&i1480u->options); - edc_init(&i1480u->tx_errors); - edc_init(&i1480u->rx_errors); -#ifdef i1480u_FLOW_CONTROL - edc_init(&i1480u->notif_edc); -#endif - stats_init(&i1480u->lqe_stats); - stats_init(&i1480u->rssi_stats); - wlp_init(&i1480u->wlp); -} - -/** - * Fill WLP device information structure - * - * The structure will contain a few character arrays, each ending with a - * null terminated string. Each string has to fit (excluding terminating - * character) into a specified range obtained from the WLP substack. - * - * It is still not clear exactly how this device information should be - * obtained. Until we find out we use the USB device descriptor as backup, some - * information elements have intuitive mappings, other not. - */ -static -void i1480u_fill_device_info(struct wlp *wlp, struct wlp_device_info *dev_info) -{ - struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); - struct usb_device *usb_dev = i1480u->usb_dev; - /* Treat device name and model name the same */ - if (usb_dev->descriptor.iProduct) { - usb_string(usb_dev, usb_dev->descriptor.iProduct, - dev_info->name, sizeof(dev_info->name)); - usb_string(usb_dev, usb_dev->descriptor.iProduct, - dev_info->model_name, sizeof(dev_info->model_name)); - } - if (usb_dev->descriptor.iManufacturer) - usb_string(usb_dev, usb_dev->descriptor.iManufacturer, - dev_info->manufacturer, - sizeof(dev_info->manufacturer)); - scnprintf(dev_info->model_nr, sizeof(dev_info->model_nr), "%04x", - __le16_to_cpu(usb_dev->descriptor.bcdDevice)); - if (usb_dev->descriptor.iSerialNumber) - usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, - dev_info->serial, sizeof(dev_info->serial)); - /* FIXME: where should we obtain category? */ - dev_info->prim_dev_type.category = cpu_to_le16(WLP_DEV_CAT_OTHER); - /* FIXME: Complete OUI and OUIsubdiv attributes */ -} - -#ifdef i1480u_FLOW_CONTROL -/** - * Callback for the notification endpoint - * - * This mostly controls the xon/xoff protocol. In case of hard error, - * we stop the queue. If not, we always retry. - */ -static -void i1480u_notif_cb(struct urb *urb, struct pt_regs *regs) -{ - struct i1480u *i1480u = urb->context; - struct usb_interface *usb_iface = i1480u->usb_iface; - struct device *dev = &usb_iface->dev; - int result; - - switch (urb->status) { - case 0: /* Got valid data, do xon/xoff */ - switch (i1480u->notif_buffer[0]) { - case 'N': - dev_err(dev, "XOFF STOPPING queue at %lu\n", jiffies); - netif_stop_queue(i1480u->net_dev); - break; - case 'A': - dev_err(dev, "XON STARTING queue at %lu\n", jiffies); - netif_start_queue(i1480u->net_dev); - break; - default: - dev_err(dev, "NEP: unknown data 0x%02hhx\n", - i1480u->notif_buffer[0]); - } - break; - case -ECONNRESET: /* Controlled situation ... */ - case -ENOENT: /* we killed the URB... */ - dev_err(dev, "NEP: URB reset/noent %d\n", urb->status); - goto error; - case -ESHUTDOWN: /* going away! */ - dev_err(dev, "NEP: URB down %d\n", urb->status); - goto error; - default: /* Retry unless it gets ugly */ - if (edc_inc(&i1480u->notif_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "NEP: URB max acceptable errors " - "exceeded; resetting device\n"); - goto error_reset; - } - dev_err(dev, "NEP: URB error %d\n", urb->status); - break; - } - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "NEP: Can't resubmit URB: %d; resetting device\n", - result); - goto error_reset; - } - return; - -error_reset: - wlp_reset_all(&i1480-wlp); -error: - netif_stop_queue(i1480u->net_dev); - return; -} -#endif - -static const struct net_device_ops i1480u_netdev_ops = { - .ndo_open = i1480u_open, - .ndo_stop = i1480u_stop, - .ndo_start_xmit = i1480u_hard_start_xmit, - .ndo_tx_timeout = i1480u_tx_timeout, - .ndo_set_config = i1480u_set_config, - .ndo_change_mtu = i1480u_change_mtu, -}; - -static -int i1480u_add(struct i1480u *i1480u, struct usb_interface *iface) -{ - int result = -ENODEV; - struct wlp *wlp = &i1480u->wlp; - struct usb_device *usb_dev = interface_to_usbdev(iface); - struct net_device *net_dev = i1480u->net_dev; - struct uwb_rc *rc; - struct uwb_dev *uwb_dev; -#ifdef i1480u_FLOW_CONTROL - struct usb_endpoint_descriptor *epd; -#endif - - i1480u->usb_dev = usb_get_dev(usb_dev); - i1480u->usb_iface = iface; - rc = uwb_rc_get_by_grandpa(&i1480u->usb_dev->dev); - if (rc == NULL) { - dev_err(&iface->dev, "Cannot get associated UWB Radio " - "Controller\n"); - goto out; - } - wlp->xmit_frame = i1480u_xmit_frame; - wlp->fill_device_info = i1480u_fill_device_info; - wlp->stop_queue = i1480u_stop_queue; - wlp->start_queue = i1480u_start_queue; - result = wlp_setup(wlp, rc, net_dev); - if (result < 0) { - dev_err(&iface->dev, "Cannot setup WLP\n"); - goto error_wlp_setup; - } - result = 0; - ether_setup(net_dev); /* make it an etherdevice */ - uwb_dev = &rc->uwb_dev; - /* FIXME: hookup address change notifications? */ - - memcpy(net_dev->dev_addr, uwb_dev->mac_addr.data, - sizeof(net_dev->dev_addr)); - - net_dev->hard_header_len = sizeof(struct untd_hdr_cmp) - + sizeof(struct wlp_tx_hdr) - + WLP_DATA_HLEN - + ETH_HLEN; - net_dev->mtu = 3500; - net_dev->tx_queue_len = 20; /* FIXME: maybe use 1000? */ - -/* net_dev->flags &= ~IFF_BROADCAST; FIXME: BUG in firmware */ - /* FIXME: multicast disabled */ - net_dev->flags &= ~IFF_MULTICAST; - net_dev->features &= ~NETIF_F_SG; - net_dev->features &= ~NETIF_F_FRAGLIST; - /* All NETIF_F_*_CSUM disabled */ - net_dev->features |= NETIF_F_HIGHDMA; - net_dev->watchdog_timeo = 5*HZ; /* FIXME: a better default? */ - - net_dev->netdev_ops = &i1480u_netdev_ops; - -#ifdef i1480u_FLOW_CONTROL - /* Notification endpoint setup (submitted when we open the device) */ - i1480u->notif_urb = usb_alloc_urb(0, GFP_KERNEL); - if (i1480u->notif_urb == NULL) { - dev_err(&iface->dev, "Unable to allocate notification URB\n"); - result = -ENOMEM; - goto error_urb_alloc; - } - epd = &iface->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb(i1480u->notif_urb, usb_dev, - usb_rcvintpipe(usb_dev, epd->bEndpointAddress), - i1480u->notif_buffer, sizeof(i1480u->notif_buffer), - i1480u_notif_cb, i1480u, epd->bInterval); - -#endif - - i1480u->tx_inflight.max = i1480u_TX_INFLIGHT_MAX; - i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD; - i1480u->tx_inflight.restart_ts = jiffies; - usb_set_intfdata(iface, i1480u); - return result; - -#ifdef i1480u_FLOW_CONTROL -error_urb_alloc: -#endif - wlp_remove(wlp); -error_wlp_setup: - uwb_rc_put(rc); -out: - usb_put_dev(i1480u->usb_dev); - return result; -} - -static void i1480u_rm(struct i1480u *i1480u) -{ - struct uwb_rc *rc = i1480u->wlp.rc; - usb_set_intfdata(i1480u->usb_iface, NULL); -#ifdef i1480u_FLOW_CONTROL - usb_kill_urb(i1480u->notif_urb); - usb_free_urb(i1480u->notif_urb); -#endif - wlp_remove(&i1480u->wlp); - uwb_rc_put(rc); - usb_put_dev(i1480u->usb_dev); -} - -/** Just setup @net_dev's i1480u private data */ -static void i1480u_netdev_setup(struct net_device *net_dev) -{ - struct i1480u *i1480u = netdev_priv(net_dev); - /* Initialize @i1480u */ - memset(i1480u, 0, sizeof(*i1480u)); - i1480u_init(i1480u); -} - -/** - * Probe a i1480u interface and register it - * - * @iface: USB interface to link to - * @id: USB class/subclass/protocol id - * @returns: 0 if ok, < 0 errno code on error. - * - * Does basic housekeeping stuff and then allocs a netdev with space - * for the i1480u data. Initializes, registers in i1480u, registers in - * netdev, ready to go. - */ -static int i1480u_probe(struct usb_interface *iface, - const struct usb_device_id *id) -{ - int result; - struct net_device *net_dev; - struct device *dev = &iface->dev; - struct i1480u *i1480u; - - /* Allocate instance [calls i1480u_netdev_setup() on it] */ - result = -ENOMEM; - net_dev = alloc_netdev(sizeof(*i1480u), "wlp%d", i1480u_netdev_setup); - if (net_dev == NULL) { - dev_err(dev, "no memory for network device instance\n"); - goto error_alloc_netdev; - } - SET_NETDEV_DEV(net_dev, dev); - i1480u = netdev_priv(net_dev); - i1480u->net_dev = net_dev; - result = i1480u_add(i1480u, iface); /* Now setup all the wlp stuff */ - if (result < 0) { - dev_err(dev, "cannot add i1480u device: %d\n", result); - goto error_i1480u_add; - } - result = register_netdev(net_dev); /* Okey dokey, bring it up */ - if (result < 0) { - dev_err(dev, "cannot register network device: %d\n", result); - goto error_register_netdev; - } - i1480u_sysfs_setup(i1480u); - if (result < 0) - goto error_sysfs_init; - return 0; - -error_sysfs_init: - unregister_netdev(net_dev); -error_register_netdev: - i1480u_rm(i1480u); -error_i1480u_add: - free_netdev(net_dev); -error_alloc_netdev: - return result; -} - - -/** - * Disconect a i1480u from the system. - * - * i1480u_stop() has been called before, so al the rx and tx contexts - * have been taken down already. Make sure the queue is stopped, - * unregister netdev and i1480u, free and kill. - */ -static void i1480u_disconnect(struct usb_interface *iface) -{ - struct i1480u *i1480u; - struct net_device *net_dev; - - i1480u = usb_get_intfdata(iface); - net_dev = i1480u->net_dev; - netif_stop_queue(net_dev); -#ifdef i1480u_FLOW_CONTROL - usb_kill_urb(i1480u->notif_urb); -#endif - i1480u_sysfs_release(i1480u); - unregister_netdev(net_dev); - i1480u_rm(i1480u); - free_netdev(net_dev); -} - -static struct usb_device_id i1480u_id_table[] = { - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE \ - | USB_DEVICE_ID_MATCH_DEV_INFO \ - | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x8086, - .idProduct = 0x0c3b, - .bDeviceClass = 0xef, - .bDeviceSubClass = 0x02, - .bDeviceProtocol = 0x02, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - }, - {}, -}; -MODULE_DEVICE_TABLE(usb, i1480u_id_table); - -static struct usb_driver i1480u_driver = { - .name = KBUILD_MODNAME, - .probe = i1480u_probe, - .disconnect = i1480u_disconnect, - .id_table = i1480u_id_table, -}; - -static int __init i1480u_driver_init(void) -{ - return usb_register(&i1480u_driver); -} -module_init(i1480u_driver_init); - - -static void __exit i1480u_driver_exit(void) -{ - usb_deregister(&i1480u_driver); -} -module_exit(i1480u_driver_exit); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("i1480 Wireless UWB Link WLP networking for USB"); -MODULE_LICENSE("GPL"); |