diff options
Diffstat (limited to 'drivers/usb')
62 files changed, 111 insertions, 111 deletions
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index b268e9fccb4..e71521ce301 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1283,7 +1283,7 @@ static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate) /* in bulk mode the modem have problem with high rate * changing internal timing could improve things, but the - * value is misterious. + * value is mysterious. * ADI930 don't support it (-EPIPE error). */ @@ -1743,7 +1743,7 @@ static int uea_send_cmvs_e1(struct uea_softc *sc) goto out; } } else { - /* This realy should not happen */ + /* This really should not happen */ uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver); goto out; } @@ -1798,7 +1798,7 @@ static int uea_send_cmvs_e4(struct uea_softc *sc) goto out; } } else { - /* This realy should not happen */ + /* This really should not happen */ uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver); goto out; } @@ -1829,7 +1829,7 @@ static int uea_start_reset(struct uea_softc *sc) /* mask interrupt */ sc->booting = 1; - /* We need to set this here because, a ack timeout could have occured, + /* We need to set this here because, a ack timeout could have occurred, * but before we start the reboot, the ack occurs and set this to 1. * So we will failed to wait Ready CMV. */ diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c index b6d49234e52..62050f7a4f9 100644 --- a/drivers/usb/c67x00/c67x00-drv.c +++ b/drivers/usb/c67x00/c67x00-drv.c @@ -27,7 +27,7 @@ * the link between the common hardware parts and the subdrivers (e.g. * interrupt handling). * - * The c67x00 has 2 SIE's (serial interface engine) wich can be configured + * The c67x00 has 2 SIE's (serial interface engine) which can be configured * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG). * * Depending on the platform configuration, the SIE's are created and diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h index 74e44621e31..e3d493d4d61 100644 --- a/drivers/usb/c67x00/c67x00-hcd.h +++ b/drivers/usb/c67x00/c67x00-hcd.h @@ -34,7 +34,7 @@ /* * The following parameters depend on the CPU speed, bus speed, ... * These can be tuned for specific use cases, e.g. if isochronous transfers - * are very important, bandwith can be sacrificed to guarantee that the + * are very important, bandwidth can be sacrificed to guarantee that the * 1ms deadline will be met. * If bulk transfers are important, the MAX_FRAME_BW can be increased, * but some (or many) isochronous deadlines might not be met. diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c index f6b3c253f3f..a03fbc15fa9 100644 --- a/drivers/usb/c67x00/c67x00-sched.c +++ b/drivers/usb/c67x00/c67x00-sched.c @@ -907,7 +907,7 @@ static inline int c67x00_end_of_data(struct c67x00_td *td) /* Remove all td's from the list which come * after last_td and are meant for the same pipe. - * This is used when a short packet has occured */ + * This is used when a short packet has occurred */ static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00, struct c67x00_td *last_td) { diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 5eeb570b9a6..b4ea54dbf32 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -52,7 +52,7 @@ */ /* - * The only reason to have several buffers is to accomodate assumptions + * The only reason to have several buffers is to accommodate assumptions * in line disciplines. They ask for empty space amount, receive our URB size, * and proceed to issue several 1-character writes, assuming they will fit. * The very first write takes a complete URB. Fortunately, this only happens diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 6a54634ab82..385acb895ab 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -483,7 +483,7 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, } done += n_characters; - /* Terminate if end-of-message bit recieved from device */ + /* Terminate if end-of-message bit received from device */ if ((buffer[8] & 0x01) && (actual >= n_characters + 12)) remaining = 0; else diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 02b4dbfa488..8eed05d2383 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -700,7 +700,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) /* The USB 2.0 spec says 256 ms. This is close enough and won't * exceed that limit if HZ is 100. The math is more clunky than * maybe expected, this is to make sure that all timers for USB devices - * fire at the same time to give the CPU a break inbetween */ + * fire at the same time to give the CPU a break in between */ if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) : (length == 0 && hcd->status_urb != NULL)) mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 564eaa5525d..8fb754916c6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1649,7 +1649,7 @@ void usb_disconnect(struct usb_device **pdev) /* mark the device as inactive, so any further urb submissions for * this device (and any of its children) will fail immediately. - * this quiesces everyting except pending urbs. + * this quiesces everything except pending urbs. */ usb_set_device_state(udev, USB_STATE_NOTATTACHED); dev_info(&udev->dev, "USB disconnect, device number %d\n", diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 0bc06e2bcfc..a6a350f5827 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -648,7 +648,7 @@ static int ehci_reset_port(int port) if (!(portsc & PORT_CONNECT)) return -ENOTCONN; - /* bomb out completely if something weird happend */ + /* bomb out completely if something weird happened */ if ((portsc & PORT_CSC)) return -EINVAL; diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index f8dd7269d79..6e42aab7580 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -278,7 +278,7 @@ static int udc_enable_dev_setup_interrupts(struct udc *dev) return 0; } -/* Calculates fifo start of endpoint based on preceeding endpoints */ +/* Calculates fifo start of endpoint based on preceding endpoints */ static int udc_set_txfifo_addr(struct udc_ep *ep) { struct udc *dev; @@ -2137,7 +2137,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix) if (use_dma) { /* BNA event ? */ if (tmp & AMD_BIT(UDC_EPSTS_BNA)) { - DBG(dev, "BNA ep%dout occured - DESPTR = %x \n", + DBG(dev, "BNA ep%dout occurred - DESPTR = %x \n", ep->num, readl(&ep->regs->desptr)); /* clear BNA */ writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts); @@ -2151,7 +2151,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix) } /* HE event ? */ if (tmp & AMD_BIT(UDC_EPSTS_HE)) { - dev_err(&dev->pdev->dev, "HE ep%dout occured\n", ep->num); + dev_err(&dev->pdev->dev, "HE ep%dout occurred\n", ep->num); /* clear HE */ writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts); @@ -2354,7 +2354,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix) /* BNA ? */ if (epsts & AMD_BIT(UDC_EPSTS_BNA)) { dev_err(&dev->pdev->dev, - "BNA ep%din occured - DESPTR = %08lx \n", + "BNA ep%din occurred - DESPTR = %08lx \n", ep->num, (unsigned long) readl(&ep->regs->desptr)); @@ -2367,7 +2367,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix) /* HE event ? */ if (epsts & AMD_BIT(UDC_EPSTS_HE)) { dev_err(&dev->pdev->dev, - "HE ep%dn occured - DESPTR = %08lx \n", + "HE ep%dn occurred - DESPTR = %08lx \n", ep->num, (unsigned long) readl(&ep->regs->desptr)); /* clear HE */ @@ -2384,7 +2384,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix) req = list_entry(ep->queue.next, struct udc_request, queue); /* - * length bytes transfered + * length bytes transferred * check dma done of last desc. in PPBDU mode */ if (use_dma_ppb_du) { @@ -2784,7 +2784,7 @@ static irqreturn_t udc_control_in_isr(struct udc *dev) /* write fifo */ udc_txfifo_write(ep, &req->req); - /* lengh bytes transfered */ + /* lengh bytes transferred */ len = req->req.length - req->req.actual; if (len > ep->ep.maxpacket) len = ep->ep.maxpacket; diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h index 4bbabbbfc93..1d1c7543468 100644 --- a/drivers/usb/gadget/amd5536udc.h +++ b/drivers/usb/gadget/amd5536udc.h @@ -584,7 +584,7 @@ union udc_setup_data { * SET and GET bitfields in u32 values * via constants for mask/offset: * <bit_field_stub_name> is the text between - * UDC_ and _MASK|_OFS of appropiate + * UDC_ and _MASK|_OFS of appropriate * constant * * set bitfield value in u32 u32Val diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index bb8ddf0469f..9b7cdb16f26 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -826,7 +826,7 @@ done: return status; } -/* reinit == restore inital software state */ +/* reinit == restore initial software state */ static void udc_reinit(struct at91_udc *udc) { u32 i; diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index c2251c40a20..82314ed2250 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -42,7 +42,7 @@ static struct usb_composite_driver *composite; static int (*composite_gadget_bind)(struct usb_composite_dev *cdev); -/* Some systems will need runtime overrides for the product identifers +/* Some systems will need runtime overrides for the product identifiers * published in the device descriptor, either numbers or strings or both. * String parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ @@ -205,14 +205,14 @@ int usb_function_activate(struct usb_function *function) * usb_interface_id() is called from usb_function.bind() callbacks to * allocate new interface IDs. The function driver will then store that * ID in interface, association, CDC union, and other descriptors. It - * will also handle any control requests targetted at that interface, + * will also handle any control requests targeted at that interface, * particularly changing its altsetting via set_alt(). There may * also be class-specific or vendor-specific requests to handle. * * All interface identifier should be allocated using this routine, to * ensure that for example different functions don't wrongly assign * different meanings to the same identifier. Note that since interface - * identifers are configuration-specific, functions used in more than + * identifiers are configuration-specific, functions used in more than * one configuration (or more than once in a given configuration) need * multiple versions of the relevant descriptors. * diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index 00975ed903d..9abecfddb27 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -742,7 +742,7 @@ int __init control_selector_init(struct f_audio *audio) } /** - * audio_bind_config - add USB audio fucntion to a configuration + * audio_bind_config - add USB audio function to a configuration * @c: the configuration to supcard the USB audio function * Context: single threaded during gadget setup * diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c index 130eee678c8..86902a60bcd 100644 --- a/drivers/usb/gadget/f_ncm.c +++ b/drivers/usb/gadget/f_ncm.c @@ -111,7 +111,7 @@ static inline unsigned ncm_bitrate(struct usb_gadget *g) #define NTB_OUT_SIZE 16384 /* - * skbs of size less than that will not be alligned + * skbs of size less than that will not be aligned * to NCM's dwNtbInMaxSize to save bus bandwidth */ diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h index bea5b827beb..e35e24fd64b 100644 --- a/drivers/usb/gadget/fsl_qe_udc.h +++ b/drivers/usb/gadget/fsl_qe_udc.h @@ -208,14 +208,14 @@ struct qe_frame{ /* Frame status field */ /* Receive side */ #define FRAME_OK 0x00000000 /* Frame tranmitted or received OK */ -#define FRAME_ERROR 0x80000000 /* Error occured on frame */ +#define FRAME_ERROR 0x80000000 /* Error occurred on frame */ #define START_FRAME_LOST 0x40000000 /* START_FRAME_LOST */ #define END_FRAME_LOST 0x20000000 /* END_FRAME_LOST */ #define RX_ER_NONOCT 0x10000000 /* Rx Non Octet Aligned Packet */ #define RX_ER_BITSTUFF 0x08000000 /* Frame Aborted --Received packet with bit stuff error */ #define RX_ER_CRC 0x04000000 /* Received packet with CRC error */ -#define RX_ER_OVERUN 0x02000000 /* Over-run occured on reception */ +#define RX_ER_OVERUN 0x02000000 /* Over-run occurred on reception */ #define RX_ER_PID 0x01000000 /* Wrong PID received */ /* Tranmit side */ #define TX_ER_NAK 0x00800000 /* Received NAK handshake */ @@ -379,7 +379,7 @@ struct qe_udc { #define T_LSP 0x01000000 /* Low-speed transaction */ #define T_PID 0x00c00000 /* packet id */ #define T_NAK 0x00100000 /* No ack. */ -#define T_STAL 0x00080000 /* Stall recieved */ +#define T_STAL 0x00080000 /* Stall received */ #define T_TO 0x00040000 /* time out */ #define T_UN 0x00020000 /* underrun */ diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 912cb8e63fe..07499c1cdcc 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -464,7 +464,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, max = le16_to_cpu(desc->wMaxPacketSize); - /* Disable automatic zlp generation. Driver is reponsible to indicate + /* Disable automatic zlp generation. Driver is responsible to indicate * explicitly through req->req.zero. This is needed to enable multi-td * request. */ zlt = 1; @@ -648,7 +648,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) | EP_QUEUE_HEAD_STATUS_HALT)); dQH->size_ioc_int_sts &= temp; - /* Ensure that updates to the QH will occure before priming. */ + /* Ensure that updates to the QH will occur before priming. */ wmb(); /* Prime endpoint by writing 1 to ENDPTPRIME */ @@ -1459,7 +1459,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe, status = -EILSEQ; break; } else - ERR("Unknown error has occured (0x%x)!\n", + ERR("Unknown error has occurred (0x%x)!\n", errors); } else if (le32_to_cpu(curr_td->size_ioc_sts) diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index 20aeceed48c..e88cce5c2c0 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -15,7 +15,7 @@ struct usb_dr_device { u8 res1[256]; u16 caplength; /* Capability Register Length */ u16 hciversion; /* Host Controller Interface Version */ - u32 hcsparams; /* Host Controller Structual Parameters */ + u32 hcsparams; /* Host Controller Structural Parameters */ u32 hccparams; /* Host Controller Capability Parameters */ u8 res2[20]; u32 dciversion; /* Device Controller Interface Version */ @@ -52,7 +52,7 @@ struct usb_dr_host { u8 res1[256]; u16 caplength; /* Capability Register Length */ u16 hciversion; /* Host Controller Interface Version */ - u32 hcsparams; /* Host Controller Structual Parameters */ + u32 hcsparams; /* Host Controller Structural Parameters */ u32 hccparams; /* Host Controller Capability Parameters */ u8 res2[20]; u32 dciversion; /* Device Controller Interface Version */ diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 0ab7e141d49..47b86b99d44 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -67,7 +67,7 @@ MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter."); module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter."); -/* Some systems will want different product identifers published in the +/* Some systems will want different product identifiers published in the * device descriptor, either numbers or strings or both. These string * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index 1eca8b47ce3..9cee88a43a7 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -642,7 +642,7 @@ static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req) dqh->dtd_status &= dtd_status; dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status); - /* ensure that updates to the dQH will occure before priming */ + /* ensure that updates to the dQH will occur before priming */ wmb(); /* write 1 to endptprime register to PRIME endpoint */ diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index d5468a7f38e..b62b2640deb 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -325,7 +325,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req) /* * Ensure that updates to the QH will - * occure before priming. + * occur before priming. */ wmb(); @@ -338,7 +338,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req) & EP_QUEUE_HEAD_NEXT_POINTER_MASK;; dqh->size_ioc_int_sts = 0; - /* Ensure that updates to the QH will occure before priming. */ + /* Ensure that updates to the QH will occur before priming. */ wmb(); /* Prime the Endpoint */ @@ -1845,7 +1845,7 @@ static irqreturn_t mv_udc_irq(int irq, void *dev) return IRQ_NONE; } - /* Clear all the interrupts occured */ + /* Clear all the interrupts occurred */ writel(status, &udc->op_regs->usbsts); if (status & USBSTS_ERR) diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index d09155b25d7..24696f7fa6a 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -117,7 +117,7 @@ module_param (fifo_mode, ushort, 0644); /* enable_suspend -- When enabled, the driver will respond to * USB suspend requests by powering down the NET2280. Otherwise, - * USB suspend requests will be ignored. This is acceptible for + * USB suspend requests will be ignored. This is acceptable for * self-powered devices */ static int enable_suspend = 0; diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c index b5364f9d7cd..55ca63ad350 100644 --- a/drivers/usb/gadget/nokia.c +++ b/drivers/usb/gadget/nokia.c @@ -203,7 +203,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev) goto err_usb; } - /* finaly register the configuration */ + /* finally register the configuration */ status = usb_add_config(cdev, &nokia_config_500ma_driver, nokia_bind_config); if (status < 0) diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 12ff6cffedc..c3f2bd42bd5 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -126,7 +126,7 @@ static struct printer_dev usb_printer_gadget; #define |