diff options
Diffstat (limited to 'drivers/usb')
52 files changed, 1182 insertions, 928 deletions
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 6303970e93c..24ee8be359f 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -130,7 +130,7 @@ MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:H struct usblp { struct usb_device *dev; /* USB device */ - struct semaphore sem; /* locks this struct, especially "dev" */ + struct mutex mut; /* locks this struct, especially "dev" */ char *writebuf; /* write transfer_buffer */ char *readbuf; /* read transfer_buffer */ char *statusbuf; /* status transfer_buffer */ @@ -465,7 +465,7 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) int twoints[2]; int retval = 0; - down (&usblp->sem); + mutex_lock (&usblp->mut); if (!usblp->present) { retval = -ENODEV; goto done; @@ -644,14 +644,14 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } done: - up (&usblp->sem); + mutex_unlock (&usblp->mut); return retval; } static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) { struct usblp *usblp = file->private_data; - int timeout, rv, err = 0, transfer_length = 0; + int timeout, intr, rv, err = 0, transfer_length = 0; size_t writecount = 0; while (writecount < count) { @@ -668,14 +668,16 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t if (rv < 0) return writecount ? writecount : -EINTR; } - down (&usblp->sem); + intr = mutex_lock_interruptible (&usblp->mut); + if (intr) + return writecount ? writecount : -EINTR; if (!usblp->present) { - up (&usblp->sem); + mutex_unlock (&usblp->mut); return -ENODEV; } if (usblp->sleeping) { - up (&usblp->sem); + mutex_unlock (&usblp->mut); return writecount ? writecount : -ENODEV; } @@ -687,10 +689,10 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t err = usblp->writeurb->status; } else err = usblp_check_status(usblp, err); - up (&usblp->sem); + mutex_unlock (&usblp->mut); /* if the fault was due to disconnect, let khubd's - * call to usblp_disconnect() grab usblp->sem ... + * call to usblp_disconnect() grab usblp->mut ... */ schedule (); continue; @@ -702,7 +704,7 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t */ writecount += transfer_length; if (writecount == count) { - up(&usblp->sem); + mutex_unlock(&usblp->mut); break; } @@ -714,7 +716,7 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t if (copy_from_user(usblp->writeurb->transfer_buffer, buffer + writecount, transfer_length)) { - up(&usblp->sem); + mutex_unlock(&usblp->mut); return writecount ? writecount : -EFAULT; } @@ -727,10 +729,10 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count = -EIO; else count = writecount ? writecount : -ENOMEM; - up (&usblp->sem); + mutex_unlock (&usblp->mut); break; } - up (&usblp->sem); + mutex_unlock (&usblp->mut); } return count; @@ -739,12 +741,14 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { struct usblp *usblp = file->private_data; - int rv; + int rv, intr; if (!usblp->bidir) return -EINVAL; - down (&usblp->sem); + intr = mutex_lock_interruptible (&usblp->mut); + if (intr) + return -EINTR; if (!usblp->present) { count = -ENODEV; goto done; @@ -757,9 +761,9 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, count = -EAGAIN; goto done; } - up(&usblp->sem); + mutex_unlock(&usblp->mut); rv = wait_event_interruptible(usblp->wait, usblp->rcomplete || !usblp->present); - down(&usblp->sem); + mutex_lock(&usblp->mut); if (rv < 0) { count = -EINTR; goto done; @@ -807,7 +811,7 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, } done: - up (&usblp->sem); + mutex_unlock (&usblp->mut); return count; } @@ -886,7 +890,7 @@ static int usblp_probe(struct usb_interface *intf, goto abort; } usblp->dev = dev; - init_MUTEX (&usblp->sem); + mutex_init (&usblp->mut); init_waitqueue_head(&usblp->wait); usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; usblp->intf = intf; @@ -1178,7 +1182,7 @@ static void usblp_disconnect(struct usb_interface *intf) device_remove_file(&intf->dev, &dev_attr_ieee1284_id); mutex_lock (&usblp_mutex); - down (&usblp->sem); + mutex_lock (&usblp->mut); usblp->present = 0; usb_set_intfdata (intf, NULL); @@ -1187,7 +1191,7 @@ static void usblp_disconnect(struct usb_interface *intf) usblp->writebuf, usblp->writeurb->transfer_dma); usb_buffer_free (usblp->dev, USBLP_BUF_SIZE, usblp->readbuf, usblp->readurb->transfer_dma); - up (&usblp->sem); + mutex_unlock (&usblp->mut); if (!usblp->used) usblp_cleanup (usblp); @@ -1200,11 +1204,11 @@ static int usblp_suspend (struct usb_interface *intf, pm_message_t message) /* this races against normal access and open */ mutex_lock (&usblp_mutex); - down (&usblp->sem); + mutex_lock (&usblp->mut); /* we take no more IO */ usblp->sleeping = 1; usblp_unlink_urbs(usblp); - up (&usblp->sem); + mutex_unlock (&usblp->mut); mutex_unlock (&usblp_mutex); return 0; @@ -1216,12 +1220,12 @@ static int usblp_resume (struct usb_interface *intf) int r; mutex_lock (&usblp_mutex); - down (&usblp->sem); + mutex_lock (&usblp->mut); usblp->sleeping = 0; r = handle_bidir (usblp); - up (&usblp->sem); + mutex_unlock (&usblp->mut); mutex_unlock (&usblp_mutex); return r; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 3ed4cb2d56d..4b3a6ab29bd 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -962,7 +962,11 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, kfree(dr); return -EFAULT; } - snoop(&ps->dev->dev, "control urb\n"); + snoop(&ps->dev->dev, "control urb: bRequest=%02x " + "bRrequestType=%02x wValue=%04x " + "wIndex=%04x wLength=%04x\n", + dr->bRequest, dr->bRequestType, dr->wValue, + dr->wIndex, dr->wLength); break; case USBDEVFS_URB_TYPE_BULK: diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 3e0abbb49fe..812c733ba8c 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -43,14 +43,16 @@ #include <linux/usb_gadget.h> #include <asm/byteorder.h> +#include <asm/hardware.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/system.h> #include <asm/mach-types.h> -#include <asm/arch/hardware.h> #include <asm/arch/gpio.h> #include <asm/arch/board.h> +#include <asm/arch/cpu.h> +#include <asm/arch/at91sam9261_matrix.h> #include "at91_udc.h" @@ -78,27 +80,11 @@ static const char driver_name [] = "at91_udc"; static const char ep0name[] = "ep0"; -/*-------------------------------------------------------------------------*/ -/* - * Read from a UDP register. - */ -static inline unsigned long at91_udp_read(unsigned int reg) -{ - void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP; - - return __raw_readl(udp_base + reg); -} - -/* - * Write to a UDP register. - */ -static inline void at91_udp_write(unsigned int reg, unsigned long value) -{ - void __iomem *udp_base = (void __iomem *)AT91_VA_BASE_UDP; - - __raw_writel(value, udp_base + reg); -} +#define at91_udp_read(dev, reg) \ + __raw_readl((dev)->udp_baseaddr + (reg)) +#define at91_udp_write(dev, reg, val) \ + __raw_writel((val), (dev)->udp_baseaddr + (reg)) /*-------------------------------------------------------------------------*/ @@ -210,13 +196,13 @@ static int proc_udc_show(struct seq_file *s, void *unused) return 0; } - tmp = at91_udp_read(AT91_UDP_FRM_NUM); + tmp = at91_udp_read(udc, AT91_UDP_FRM_NUM); seq_printf(s, "frame %05x:%s%s frame=%d\n", tmp, (tmp & AT91_UDP_FRM_OK) ? " ok" : "", (tmp & AT91_UDP_FRM_ERR) ? " err" : "", (tmp & AT91_UDP_NUM)); - tmp = at91_udp_read(AT91_UDP_GLB_STAT); + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT); seq_printf(s, "glbstate %02x:%s" FOURBITS "\n", tmp, (tmp & AT91_UDP_RMWUPE) ? " rmwupe" : "", (tmp & AT91_UDP_RSMINPR) ? " rsminpr" : "", @@ -224,13 +210,13 @@ static int proc_udc_show(struct seq_file *s, void *unused) (tmp & AT91_UDP_CONFG) ? " confg" : "", (tmp & AT91_UDP_FADDEN) ? " fadden" : ""); - tmp = at91_udp_read(AT91_UDP_FADDR); + tmp = at91_udp_read(udc, AT91_UDP_FADDR); seq_printf(s, "faddr %03x:%s fadd=%d\n", tmp, (tmp & AT91_UDP_FEN) ? " fen" : "", (tmp & AT91_UDP_FADD)); - proc_irq_show(s, "imr ", at91_udp_read(AT91_UDP_IMR)); - proc_irq_show(s, "isr ", at91_udp_read(AT91_UDP_ISR)); + proc_irq_show(s, "imr ", at91_udp_read(udc, AT91_UDP_IMR)); + proc_irq_show(s, "isr ", at91_udp_read(udc, AT91_UDP_ISR)); if (udc->enabled && udc->vbus) { proc_ep_show(s, &udc->ep[0]); @@ -286,6 +272,7 @@ static inline void remove_debug_file(struct at91_udc *udc) {} static void done(struct at91_ep *ep, struct at91_request *req, int status) { unsigned stopped = ep->stopped; + struct at91_udc *udc = ep->udc; list_del_init(&req->queue); if (req->req.status == -EINPROGRESS) @@ -301,7 +288,7 @@ static void done(struct at91_ep *ep, struct at91_request *req, int status) /* ep0 is always ready; other endpoints need a non-empty queue */ if (list_empty(&ep->queue) && ep->int_mask != (1 << 0)) - at91_udp_write(AT91_UDP_IDR, ep->int_mask); + at91_udp_write(udc, AT91_UDP_IDR, ep->int_mask); } /*-------------------------------------------------------------------------*/ @@ -554,8 +541,8 @@ ok: * reset/init endpoint fifo. NOTE: leaves fifo_bank alone, * since endpoint resets don't reset hw pingpong state. */ - at91_udp_write(AT91_UDP_RST_EP, ep->int_mask); - at91_udp_write(AT91_UDP_RST_EP, 0); + at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask); + at91_udp_write(dev, AT91_UDP_RST_EP, 0); local_irq_restore(flags); return 0; @@ -564,6 +551,7 @@ ok: static int at91_ep_disable (struct usb_ep * _ep) { struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); + struct at91_udc *udc = ep->udc; unsigned long flags; if (ep == &ep->udc->ep[0]) @@ -579,8 +567,8 @@ static int at91_ep_disable (struct usb_ep * _ep) /* reset fifos and endpoint */ if (ep->udc->clocked) { - at91_udp_write(AT91_UDP_RST_EP, ep->int_mask); - at91_udp_write(AT91_UDP_RST_EP, 0); + at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask); + at91_udp_write(udc, AT91_UDP_RST_EP, 0); __raw_writel(0, ep->creg); } @@ -695,10 +683,10 @@ static int at91_ep_queue(struct usb_ep *_ep, * reconfigures the endpoints. */ if (dev->wait_for_config_ack) { - tmp = at91_udp_read(AT91_UDP_GLB_STAT); + tmp = at91_udp_read(dev, AT91_UDP_GLB_STAT); tmp ^= AT91_UDP_CONFG; VDBG("toggle config\n"); - at91_udp_write(AT91_UDP_GLB_STAT, tmp); + at91_udp_write(dev, AT91_UDP_GLB_STAT, tmp); } if (req->req.length == 0) { ep0_in_status: @@ -727,7 +715,7 @@ ep0_in_status: if (req && !status) { list_add_tail (&req->queue, &ep->queue); - at91_udp_write(AT91_UDP_IER, ep->int_mask); + at91_udp_write(dev, AT91_UDP_IER, ep->int_mask); } done: local_irq_restore(flags); @@ -758,6 +746,7 @@ static int at91_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) static int at91_ep_set_halt(struct usb_ep *_ep, int value) { struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); + struct at91_udc *udc = ep->udc; u32 __iomem *creg; u32 csr; unsigned long flags; @@ -785,8 +774,8 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value) csr |= AT91_UDP_FORCESTALL; VDBG("halt %s\n", ep->ep.name); } else { - at91_udp_write(AT91_UDP_RST_EP, ep->int_mask); - at91_udp_write(AT91_UDP_RST_EP, 0); + at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask); + at91_udp_write(udc, AT91_UDP_RST_EP, 0); csr &= ~AT91_UDP_FORCESTALL; } __raw_writel(csr, creg); @@ -813,9 +802,11 @@ static struct usb_ep_ops at91_ep_ops = { static int at91_get_frame(struct usb_gadget *gadget) { + struct at91_udc *udc = to_udc(gadget); + if (!to_udc(gadget)->clocked) return -EINVAL; - return at91_udp_read(AT91_UDP_FRM_NUM) & AT91_UDP_NUM; + return at91_udp_read(udc, AT91_UDP_FRM_NUM) & AT91_UDP_NUM; } static int at91_wakeup(struct usb_gadget *gadget) @@ -833,11 +824,11 @@ static int at91_wakeup(struct usb_gadget *gadget) /* NOTE: some "early versions" handle ESR differently ... */ - glbstate = at91_udp_read(AT91_UDP_GLB_STAT); + glbstate = at91_udp_read(udc, AT91_UDP_GLB_STAT); if (!(glbstate & AT91_UDP_ESR)) goto done; glbstate |= AT91_UDP_ESR; - at91_udp_write(AT91_UDP_GLB_STAT, glbstate); + at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate); done: local_irq_restore(flags); @@ -861,6 +852,7 @@ static void udc_reinit(struct at91_udc *udc) ep->stopped = 0; ep->fifo_bank = 0; ep->ep.maxpacket = ep->maxpacket; + ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i); // initialiser une queue par endpoint INIT_LIST_HEAD(&ep->queue); } @@ -915,14 +907,41 @@ static void pullup(struct at91_udc *udc, int is_on) if (!udc->enabled || !udc->vbus) is_on = 0; DBG("%sactive\n", is_on ? "" : "in"); + if (is_on) { clk_on(udc); - at91_udp_write(AT91_UDP_TXVC, 0); - at91_set_gpio_value(udc->board.pullup_pin, 1); - } else { + at91_udp_write(udc, AT91_UDP_TXVC, 0); + if (cpu_is_at91rm9200()) + at91_set_gpio_value(udc->board.pullup_pin, 1); + else if (cpu_is_at91sam9260()) { + u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC); + + txvc |= AT91_UDP_TXVC_PUON; + at91_udp_write(udc, AT91_UDP_TXVC, txvc); + } else if (cpu_is_at91sam9261()) { + u32 usbpucr; + + usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR); + usbpucr |= AT91_MATRIX_USBPUCR_PUON; + at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr); + } + } else { stop_activity(udc); - at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); - at91_set_gpio_value(udc->board.pullup_pin, 0); + at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); + if (cpu_is_at91rm9200()) + at91_set_gpio_value(udc->board.pullup_pin, 0); + else if (cpu_is_at91sam9260()) { + u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC); + + txvc &= ~AT91_UDP_TXVC_PUON; + at91_udp_write(udc, AT91_UDP_TXVC, txvc); + } else if (cpu_is_at91sam9261()) { + u32 usbpucr; + + usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR); + usbpucr &= ~AT91_MATRIX_USBPUCR_PUON; + at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr); + } clk_off(udc); } } @@ -936,7 +955,10 @@ static int at91_vbus_session(struct usb_gadget *gadget, int is_active) // VDBG("vbus %s\n", is_active ? "on" : "off"); local_irq_save(flags); udc->vbus = (is_active != 0); - pullup(udc, is_active); + if (udc->driver) + pullup(udc, is_active); + else + pullup(udc, 0); local_irq_restore(flags); return 0; } @@ -1086,7 +1108,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8) | USB_REQ_SET_CONFIGURATION: - tmp = at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_CONFG; + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_CONFG; if (pkt.r.wValue) udc->wait_for_config_ack = (tmp == 0); else @@ -1103,7 +1125,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) case ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8) | USB_REQ_GET_STATUS: tmp = (udc->selfpowered << USB_DEVICE_SELF_POWERED); - if (at91_udp_read(AT91_UDP_GLB_STAT) & AT91_UDP_ESR) + if (at91_udp_read(udc, AT91_UDP_GLB_STAT) & AT91_UDP_ESR) tmp |= (1 << USB_DEVICE_REMOTE_WAKEUP); PACKET("get device status\n"); __raw_writeb(tmp, dreg); @@ -1114,17 +1136,17 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) | USB_REQ_SET_FEATURE: if (w_value != USB_DEVICE_REMOTE_WAKEUP) goto stall; - tmp = at91_udp_read(AT91_UDP_GLB_STAT); + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT); tmp |= AT91_UDP_ESR; - at91_udp_write(AT91_UDP_GLB_STAT, tmp); + at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp); goto succeed; case ((USB_TYPE_STANDARD|USB_RECIP_DEVICE) << 8) | USB_REQ_CLEAR_FEATURE: if (w_value != USB_DEVICE_REMOTE_WAKEUP) goto stall; - tmp = at91_udp_read(AT91_UDP_GLB_STAT); + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT); tmp &= ~AT91_UDP_ESR; - at91_udp_write(AT91_UDP_GLB_STAT, tmp); + at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp); goto succeed; /* @@ -1206,8 +1228,8 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) } else if (ep->is_in) goto stall; - at91_udp_write(AT91_UDP_RST_EP, ep->int_mask); - at91_udp_write(AT91_UDP_RST_EP, 0); + at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask); + at91_udp_write(udc, AT91_UDP_RST_EP, 0); tmp = __raw_readl(ep->creg); tmp |= CLR_FX; tmp &= ~(SET_FX | AT91_UDP_FORCESTALL); @@ -1222,7 +1244,10 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) #undef w_length /* pass request up to the gadget driver */ - status = udc->driver->setup(&udc->gadget, &pkt.r); + if (udc->driver) + status = udc->driver->setup(&udc->gadget, &pkt.r); + else + status = -ENODEV; if (status < 0) { stall: VDBG("req %02x.%02x protocol STALL; stat %d\n", @@ -1300,13 +1325,13 @@ static void handle_ep0(struct at91_udc *udc) if (udc->wait_for_addr_ack) { u32 tmp; - at91_udp_write(AT91_UDP_FADDR, + at91_udp_write(udc, AT91_UDP_FADDR, AT91_UDP_FEN | udc->addr); - tmp = at91_udp_read(AT91_UDP_GLB_STAT); + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT); tmp &= ~AT91_UDP_FADDEN; if (udc->addr) tmp |= AT91_UDP_FADDEN; - at91_udp_write(AT91_UDP_GLB_STAT, tmp); + at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp); udc->wait_for_addr_ack = 0; VDBG("address %d\n", udc->addr); @@ -1374,28 +1399,28 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) while (rescans--) { u32 status; - status = at91_udp_read(AT91_UDP_ISR) - & at91_udp_read(AT91_UDP_IMR); + status = at91_udp_read(udc, AT91_UDP_ISR) + & at91_udp_read(udc, AT91_UDP_IMR); if (!status) break; /* USB reset irq: not maskable */ if (status & AT91_UDP_ENDBUSRES) { - at91_udp_write(AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS); - at91_udp_write(AT91_UDP_IER, MINIMUS_INTERRUPTUS); + at91_udp_write(udc, AT91_UDP_IDR, ~MINIMUS_INTERRUPTUS); + at91_udp_write(udc, AT91_UDP_IER, MINIMUS_INTERRUPTUS); /* Atmel code clears this irq twice */ - at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES); - at91_udp_write(AT91_UDP_ICR, AT91_UDP_ENDBUSRES); + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES); + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_ENDBUSRES); VDBG("end bus reset\n"); udc->addr = 0; stop_activity(udc); /* enable ep0 */ - at91_udp_write(AT91_UDP_CSR(0), + at91_udp_write(udc, AT91_UDP_CSR(0), AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL); udc->gadget.speed = USB_SPEED_FULL; udc->suspended = 0; - at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0)); + at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_EP(0)); /* * NOTE: this driver keeps clocks off unless the @@ -1406,9 +1431,9 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) /* host initiated suspend (3+ms bus idle) */ } else if (status & AT91_UDP_RXSUSP) { - at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXSUSP); - at91_udp_write(AT91_UDP_IER, AT91_UDP_RXRSM); - at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXSUSP); + at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXSUSP); + at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXRSM); + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXSUSP); // VDBG("bus suspend\n"); if (udc->suspended) continue; @@ -1425,9 +1450,9 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) /* host initiated resume */ } else if (status & AT91_UDP_RXRSM) { - at91_udp_write(AT91_UDP_IDR, AT91_UDP_RXRSM); - at91_udp_write(AT91_UDP_IER, AT91_UDP_RXSUSP); - at91_udp_write(AT91_UDP_ICR, AT91_UDP_RXRSM); + at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM); + at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXSUSP); + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM); // VDBG("bus resume\n"); if (!udc->suspended) continue; @@ -1485,8 +1510,6 @@ static struct at91_udc controller = { }, .udc = &controller, .maxpacket = 8, - .creg = (void __iomem *)(AT91_VA_BASE_UDP - + AT91_UDP_CSR(0)), .int_mask = 1 << 0, }, .ep[1] = { @@ -1497,8 +1520,6 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 64, - .creg = (void __iomem *)(AT91_VA_BASE_UDP - + AT91_UDP_CSR(1)), .int_mask = 1 << 1, }, .ep[2] = { @@ -1509,8 +1530,6 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 64, - .creg = (void __iomem *)(AT91_VA_BASE_UDP - + AT91_UDP_CSR(2)), .int_mask = 1 << 2, }, .ep[3] = { @@ -1521,8 +1540,6 @@ static struct at91_udc controller = { }, .udc = &controller, .maxpacket = 8, - .creg = (void __iomem *)(AT91_VA_BASE_UDP - + AT91_UDP_CSR(3)), .int_mask = 1 << 3, }, .ep[4] = { @@ -1533,8 +1550,6 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 256, - .creg = (void __iomem *)(AT91_VA_BASE_UDP - + AT91_UDP_CSR(4)), .int_mask = 1 << 4, }, .ep[5] = { @@ -1545,8 +1560,6 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 256, - .creg = (void __iomem *)(AT91_VA_BASE_UDP - + AT91_UDP_CSR(5)), .int_mask = 1 << 5, }, /* ep6 and ep7 are also reserved (custom silicon might use them) */ @@ -1572,9 +1585,8 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver) int retval; if (!driver - || driver->speed != USB_SPEED_FULL + || driver->speed < USB_SPEED_FULL || !driver->bind - || !driver->unbind || !driver->setup) { DBG("bad parameter.\n"); return -EINVAL; @@ -1595,6 +1607,10 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver) if (retval) { DBG("driver->bind() returned %d\n", retval); udc->driver = NULL; + udc->gadget.dev.driver = NULL; + udc->gadget.dev.driver_data = NULL; + udc->enabled = 0; + udc->selfpowered = 0; return retval; } @@ -1611,12 +1627,12 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) { struct at91_udc *udc = &controller; - if (!driver || driver != udc->driver) + if (!driver || driver != udc->driver || !driver->unbind) return -EINVAL; local_irq_disable(); udc->enabled = 0; - at91_udp_write(AT91_UDP_IDR, ~0); + at91_udp_write(udc, AT91_UDP_IDR, ~0); pullup(udc, 0); local_irq_enable(); @@ -1641,6 +1657,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct at91_udc *udc; int retval; + struct resource *res; if (!dev->platform_data) { /* small (so we copy it) but critical! */ @@ -1658,7 +1675,13 @@ static int __devinit at91udc_probe(struct platform_device *pdev) return -ENODEV; } - if (!request_mem_region(AT91RM9200_BASE_UDP, SZ_16K, driver_name)) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + if (!request_mem_region(res->start, + res->end - res->start + 1, + driver_name)) { DBG("someone's using UDC memory\n"); return -EBUSY; } @@ -1668,15 +1691,23 @@ static int __devinit at91udc_probe(struct platform_device *pdev) udc->gadget.dev.parent = dev; udc->board = *(struct at91_udc_data *) dev->platform_data; udc->pdev = pdev; - udc_reinit(udc); udc->enabled = 0; + udc->udp_baseaddr = ioremap(res->start, res->end - res->start + 1); + if (!udc->udp_baseaddr) { + release_mem_region(res->start, res->end - res->start + 1); + return -ENOMEM; + } + + udc_reinit(udc); + /* get interface and function clocks */ udc->iclk = clk_get(dev, "udc_clk"); udc->fclk = clk_get(dev, "udpck"); if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk)) { DBG("clocks missing\n"); - return -ENODEV; + retval = -ENODEV; + goto fail0; } retval = device_register(&udc->gadget.dev); @@ -1685,8 +1716,10 @@ static int __devinit at91udc_probe(struct platform_device *pdev) /* don't do anything until we have both gadget driver and VBUS */ clk_enable(udc->iclk); - at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); - at91_udp_write(AT91_UDP_IDR, 0xffffffff); + at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); + at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff); + /* Clear all pending interrupts - UDP may be used by bootloader. */ + at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff); clk_disable(udc->iclk); /* request UDC and maybe VBUS irqs */ @@ -1698,6 +1731,11 @@ static int __devinit at91udc_probe(struct platform_device *pdev) goto fail1; } if (udc->board.vbus_pin > 0) { + /* + * Get the initial state of VBUS - we cannot expect + * a pending interrupt. + */ + udc->vbus = at91_get_gpio_value(udc->board.vbus_pin); if (request_irq(udc->board.vbus_pin, at91_vbus_irq, IRQF_DISABLED, driver_name, udc)) { DBG("request vbus irq %d failed\n", @@ -1720,7 +1758,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) fail1: device_unregister(&udc->gadget.dev); fail0: - release_mem_region(AT91RM9200_BASE_UDP, SZ_16K); + release_mem_region(res->start, res->end - res->start + 1); DBG("%s probe failed, %d\n", driver_name, retval); return retval; } @@ -1728,13 +1766,14 @@ fail0: static int __devexit at91udc_remove(struct platform_device *pdev) { struct at91_udc *udc = platform_get_drvdata(pdev); + struct resource *res; DBG("remove\n"); - pullup(udc, 0); + if (udc->driver) + return -EBUSY; - if (udc->driver != 0) - usb_gadget_unregister_driver(udc->driver); + pullup(udc, 0); device_init_wakeup(&pdev->dev, 0); remove_debug_file(udc); @@ -1742,7 +1781,10 @@ static int __devexit at91udc_remove(struct platform_device *pdev) free_irq(udc->board.vbus_pin, udc); free_irq(udc->udp_irq, udc); device_unregister(&udc->gadget.dev); - release_mem_region(AT91RM9200_BASE_UDP, SZ_16K); + + iounmap(udc->udp_baseaddr); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res->end - res->start + 1); clk_put(udc->iclk); clk_put(udc->fclk); diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index 882af42e86c..677089baa59 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -51,10 +51,10 @@ #define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */ #define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */ #define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */ -#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */ +#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */ #define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */ #define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */ -#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */ +#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */ #define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */ #define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */ @@ -84,7 +84,7 @@ #define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */ #define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */ - +#define AT91_UDP_TXVC_PUON (1 << 9) /* PullUp On [AT91SAM9260 only] */ /*-------------------------------------------------------------------------*/ @@ -141,6 +141,7 @@ struct at91_udc { struct clk *iclk, *fclk; struct platform_device *pdev; struct proc_dir_entry *pde; + void __iomem *udp_baseaddr; int udp_irq; }; diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index f1f32d7be5f..3c2bc075ef4 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -779,7 +779,7 @@ usb_gadget_register_driver (struct usb_gadget_driver *driver) return -EINVAL; if (dum->driver) return -EBUSY; - if (!driver->bind || !driver->unbind || !driver->setup + if (!driver->bind || !driver->setup || driver->speed == USB_SPEED_UNKNOWN) return -EINVAL; @@ -837,7 +837,8 @@ usb_gadget_register_driver (struct usb_gadget_driver *driver) err_bind_driver: driver_unregister (&driver->driver); err_register: - driver->unbind (&dum->gadget); + if (driver->unbind) + driver->unbind (&dum->gadget); spin_lock_irq (&dum->lock); dum->pullup = 0; set_link_state (dum); @@ -857,7 +858,7 @@ usb_gadget_unregister_driver (struct usb_gadget_driver *driver) if (!dum) return -ENODEV; - if (!driver || driver != dum->driver) + if (!driver || driver != dum->driver || !driver->unbind) return -EINVAL; dev_dbg (udc_dev(dum), "unregister gadget driver '%s'\n", diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index a265e262a2e..72f2ae96fbf 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -4100,7 +4100,7 @@ static struct usb_gadget_driver fsg_driver = { #endif .function = (char *) longname, .bind = fsg_bind, - .unbind = __exit_p(fsg_unbind), + .unbind = fsg_unbind, .disconnect = fsg_disconnect, .setup = fsg_setup, .suspend = fsg_suspend, diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 31351826f2b..f1a679656c9 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -123,7 +123,7 @@ struct gmidi_device { struct usb_request *req; /* for control responses */ u8 config; struct usb_ep *in_ep, *out_ep; - struct snd_card *card; + struct snd_card *card; struct snd_rawmidi *rmidi; struct snd_rawmidi_substream *in_substream; struct snd_rawmidi_substream *out_substream; @@ -490,7 +490,7 @@ static void gmidi_complete(struct usb_ep *ep, struct usb_request *req) int status = req->status; switch (status) { - case 0: /* normal completion */ + case 0: /* normal completion */ if (ep == dev->out_ep) { /* we received stuff. req is queued again, below */ @@ -505,7 +505,7 @@ static void gmidi_complete(struct usb_ep *ep, struct usb_request *req) break; /* this endpoint is normally active while we're configured */ - case -ECONNABORTED: /* hardware forced ep reset */ + case -ECONNABORTED: /* hardware forced ep reset */ case -ECONNRESET: /* request dequeued */ case -ESHUTDOWN: /* disconnect from host */ VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status, @@ -656,7 +656,7 @@ gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags) case USB_SPEED_LOW: speed = "low"; break; case USB_SPEED_FULL: speed = "full"; break; case USB_SPEED_HIGH: speed = "high"; break; - default: speed = "?"; break; + default: speed = "?"; break; } dev->config = number; @@ -1308,7 +1308,7 @@ static struct usb_gadget_driver gmidi_driver = { .speed = USB_SPEED_FULL, .function = (char *)longname, .bind = gmidi_bind, - .unbind = __exit_p(gmidi_unbind), + .unbind = gmidi_unbind, .setup = gmidi_setup, .disconnect = gmidi_disconnect, @@ -1316,7 +1316,7 @@ static struct usb_gadget_driver gmidi_driver = { .suspend = gmidi_suspend, .resume = gmidi_resume, - .driver = { + .driver = { .name = (char *)shortname, .owner = THIS_MODULE, }, diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 805a9826842..d0ef1d6b3fa 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -1432,7 +1432,6 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind - || !driver->unbind || !driver->disconnect || !driver->setup) return -EINVAL; @@ -1495,7 +1494,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) if (!dev) return -ENODEV; - if (!driver || driver != dev->driver) + if (!driver || driver != dev->driver || !driver->unbind) return -EINVAL; spin_lock_irqsave(&dev->lock, flags); @@ -1808,13 +1807,8 @@ static void goku_remove(struct pci_dev *pdev) struct goku_udc *dev = pci_get_drvdata(pdev); DBG(dev, "%s\n", __FUNCTION__); - /* start with the driver above us */ - if (dev->driver) { - /* should have been done already by driver model core */ - WARN(dev, "pci remove, driver '%s' is still registered\n", - dev->driver->driver.name); - usb_gadget_unregister_driver(dev->driver); - } + + BUG_ON(dev->driver); #ifdef CONFIG_USB_GADGET_DEBUG_FILES remove_proc_entry(proc_node_name, NULL); diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index 4a991564a03..a0a73c08a34 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -422,9 +422,10 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) DEBUG("%s: %s\n", __FUNCTION__, driver->driver.name); if (!driver - || driver->speed != USB_SPEED_FULL - || !driver->bind - || !driver->unbind || !driver->disconnect || !driver->setup) + || driver->speed != USB_SPEED_FULL + || !driver->bind + || !driver->disconnect + || !driver->setup) return -EINVAL; if (!dev) return -ENODEV; @@ -471,7 +472,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) if (!dev) return -ENODEV; - if (!driver || driver != dev->driver) + if (!driver || driver != dev->driver || !driver->unbind) return -EINVAL; spin_lock_irqsave(&dev->lock, flags); @@ -2125,9 +2126,11 @@ static int lh7a40x_udc_remove(struct platform_device *pdev) DEBUG("%s: %p\n", __FUNCTION__, pdev); + if (dev->driver) + return -EBUSY; + udc_disable(dev); remove_proc_files(); - usb_gadget_unregister_driver(dev->driver); free_irq(IRQ_USBINTR, dev); diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 3024c679e38..569eb8ccf23 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -2020,7 +2020,6 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver) if (!driver || driver->speed != USB_SPEED_HIGH || !driver->bind - || !driver->unbind || !driver->setup) return -EINVAL; if (!dev) @@ -2107,7 +2106,7 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) if (!dev) return -ENODEV; - if (!driver || driver != dev->driver) + if (!driver || driver != dev->driver || !driver->unbind) return -EINVAL; spin_lock_irqsave (&dev->lock, flags); @@ -2803,13 +2802,7 @@ static void net2280_remove (struct pci_dev *pdev) { struct net2280 *dev = pci_get_drvdata (pdev); - /* start with the driver above us */ - if (dev->driver) { - /* should have been done already by driver model core */ - WARN (dev, "pci remove, driver '%s' is still registered\n", - dev->driver->driver.name); - usb_gadget_unregister_driver (dev->driver); - } + BUG_ON(dev->driver); /* then clean up the resources we allocated during probe() */ net2280_led_shutdown (dev); diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 030d87c28c2..15d77c30793 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -2043,7 +2043,6 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver) // FIXME if otg, check: driver->is_otg || driver->speed < USB_SPEED_FULL || !driver->bind - || !driver->unbind || !driver->setup) return -EINVAL; @@ -2087,9 +2086,11 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver) status = otg_set_peripheral(udc->transceiver, &udc->gadget); if (status < 0) { ERR("can't bind to transceiver\n"); - driver->unbind (&udc->gadget); - udc->gadget.dev.driver = NULL; - udc->driver = NULL; + if (driver->unbind) { + driver->unbind (&udc->gadget); + udc->gadget.dev.driver = NULL; + udc->driver = NULL; + } goto done; } } else { @@ -2117,7 +2118,7 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) if (!udc) return -ENODEV; - if (!driver || driver != udc->driver) + if (!driver || driver != udc->driver || !driver->unbind) return -EINVAL; if (machine_is_omap_innovator() || machine_is_omap_osk()) @@ -2870,6 +2871,8 @@ static int __exit omap_udc_remove(struct platform_device *pdev) if (!udc) return -ENODEV; + if (udc->driver) + return -EBUSY; udc->done = &done; diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 1ed506e9598..b78de969466 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -1623,7 +1623,6 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind - || !driver->unbind || !driver->disconnect || !driver->setup) return -EINVAL; @@ -1694,7 +1693,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) if (!dev) return -ENODEV; - if (!driver || driver != dev->driver) + if (!driver || driver != dev->driver || !driver->unbind) return -EINVAL; local_irq_disable(); @@ -2638,9 +2637,11 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) { struct pxa2xx_udc *dev = platform_get_drvdata(pdev); + if (dev->driver) + return -EBUSY; + udc_disable(dev); remove_proc_files(); - usb_gadget_unregister_driver(dev->driver); if (dev->got_irq) { free_irq(IRQ_USB, dev); diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 2d12bf9f19d..f8a3ec64635 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -296,7 +296,7 @@ static struct usb_gadget_driver gs_gadget_driver = { #endif /* CONFIG_USB_GADGET_DUALSPEED */ .function = GS_LONG_NAME, .bind = gs_bind, - .unbind = __exit_p(gs_unbind), + .unbind = gs_unbind, .setup = gs_setup, .disconnect = gs_disconnect, .driver = { diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index b466581beb4..cc405512fa1 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -187,7 +187,6 @@ ohci_at91_start (struct usb_hcd *hcd) { struct at91_usbh_data *board = hcd->self.controller->platform_data; struct ohci_hcd *ohci = hcd_to_ohci (hcd); - struct usb_device *root = hcd->self.root_hub; int ret; if ((ret = ohci_init(ohci)) < 0) @@ -221,7 +220,7 @@ static const struct hc_driver ohci_at91_hc_driver = { */ .start = ohci_at91_start, .stop = ohci_stop, - .shutdown = ohci_shutdown, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 24e23c5783d..e70b2430e2a 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -269,7 +269,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { */ .start = ohci_au1xxx_start, .stop = ohci_stop, - .shutdown = ohci_shutdown, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -336,7 +336,7 @@ static int ohci_hcd_au1xxx_drv_resume(struct platform_device *dev) static struct platform_driver ohci_hcd_au1xxx_driver = { .probe = ohci_hcd_au1xxx_drv_probe, .remove = ohci_hcd_au1xxx_drv_remove, - .shutdown = usb_hcd_platform_shutdown, + .shutdown = usb_hcd_platform_shutdown, /*.suspend = ohci_hcd_au1xxx_drv_suspend, */ /*.resume = ohci_hcd_au1xxx_drv_resume, */ .driver = { diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 0f47a57dac2..273d5ddb72b 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -16,7 +16,7 @@ case PIPE_CONTROL: temp = "ctrl"; break; \ case PIPE_BULK: temp = "bulk"; break; \ case PIPE_INTERRUPT: temp = "intr"; break; \ - default: temp = "isoc"; break; \ + default: temp = "isoc"; break; \ }; temp;}) #define pipestring(pipe) edstring(usb_pipetype(pipe)) @@ -205,13 +205,13 @@ ohci_dump_status (struct ohci_hcd *controller, char **next, unsigned *size) (temp & RH_PS_PSSC) ? " PSSC" : "", \ (temp & RH_PS_PESC) ? " PESC" : "", \ (temp & RH_PS_CSC) ? " CSC" : "", \ - \ + \ (temp & RH_PS_LSDA) ? " LSDA" : "", \ (temp & RH_PS_PPS) ? " PPS" : "", \ (temp & RH_PS_PRS) ? " PRS" : "", \ (temp & RH_PS_POCI) ? " POCI" : "", \ (temp & RH_PS_PSS) ? " PSS" : "", \ - \ + \ (temp & RH_PS_PES) ? " PES" : "", \ (temp & RH_PS_CCS) ? " CCS" : "" \ ); @@ -563,7 +563,7 @@ show_periodic (struct class_device *class_dev, char *buf) (info & ED_SKIP) ? " K" : "", (ed->hwHeadP & cpu_to_hc32(ohci, ED_H)) ? - " H" : ""); + " H" : ""); size -= temp; next += temp; diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index 1bf5e7a4e73..43ae696b2ec 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -204,7 +204,7 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev) static struct platform_driver ohci_hcd_ep93xx_driver = { .probe = ohci_hcd_ep93xx_drv_probe, .remove = ohci_hcd_ep93xx_drv_remove, - .shutdown = usb_hcd_platform_shutdown, + .shutdown = usb_hcd_platform_shutdown, #ifdef CONFIG_PM .suspend = ohci_hcd_ep93xx_drv_suspend, .resume = ohci_hcd_ep93xx_drv_resume, diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b28a9b60206..c1c1d871aba 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -3,77 +3,21 @@ * * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net> - * + * * [ Initialisation is based on Linus' ] * [ uhci code and gregs ohci fragments ] * [ (C) Copyright 1999 Linus Torvalds ] * [ (C) Copyright 1999 Gregory P. Smith] - * - * + * + * * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller * interfaces (though some non-x86 Intel chips use it). It supports * smarter hardware than UHCI. A download link for the spec available * through the http://www.usb.org website. * - * History: - * - * 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer) - * 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net) - * 2003/02/24 show registers in sysfs (Kevin Brosius) - * - * 2002/09/03 get rid of ed hashtables, rework periodic scheduling and - * bandwidth accounting; if debugging, show schedules in driverfs - * 2002/07/19 fixes to management of ED and schedule state. - * 2002/06/09 SA-1111 support (Christopher Hoover) - * 2002/06/01 remember frame when HC won't see EDs any more; use that info - * to fix urb unlink races caused by interrupt latency assumptions; - * minor ED field and function naming updates - * 2002/01/18 package as a patch for 2.5.3; this should match the - * 2.4.17 kernel modulo some bugs being fixed. - * - * 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes - * from post-2.4.5 patches. - * 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning - * 2001/09/07 match PCI PM changes, errnos from Linus' tree - * 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify; - * pbook pci quirks gone (please fix pbook pci sw!) (db) - * - * 2001/04/08 Identify version on module load (gb) - * 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam); - pci_map_single (db) - * 2001/03/21 td and dev/ed allocation uses new pci_pool API (db) - * 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam) - * - * 2000/09/26 fixed races in removing the private portion of the urb - * 2000/09/07 disable bulk and control lists when unlinking the last - * endpoint descriptor in order to avoid unrecoverable errors on - * the Lucent chips. (rwc@sgi) - * 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some - * urb unlink probs, indentation fixes - * 2000/08/11 various oops fixes mostly affecting iso and cleanup from - * device unplugs. - * 2000/06/28 use PCI hotplug framework, for better power management - * and for Cardbus support (David Brownell) - * 2000/earlier: fixes for NEC/Lucent chips; suspend/resume handling - * when the controller loses power; handle UE; cleanup; ... - * - * v5.2 1999/12/07 URB 3rd preview, - * v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi) - * v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume - * i386: HUB, Keyboard, Mouse, Printer - * - * v4.3 1999/10/27 multiple HCs, bulk_request - * v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes - * v4.1 1999/08/27 Randy Dunlap's - ISO API first impl. - * v4.0 1999/08/18 - * v3.0 1999/06/25 - * v2.1 1999/05/09 code clean up - * v2.0 1999/05/04 - * v1.0 1999/04/27 initial release - * * This file is licenced under the GPL. */ - + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/pci.h> @@ -89,7 +33,7 @@ #include <linux/list.h> #include <linux/usb.h> #include <linux/usb/otg.h> -#include <linux/dma-mapping.h> +#include <linux/dma-mapping.h> #include <linux/dmapool.h> #include <linux/reboot.h> @@ -183,11 +127,11 @@ static int ohci_urb_enqueue ( int i, size = 0; unsigned long flags; int retval = 0; - + #ifdef OHCI_VERBOSE_DEBUG urb_print (urb, "SUB", usb_pipein (pipe)); #endif - + /* every endpoint has a ed, locate and maybe (re)initialize it */ if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval))) return -ENOMEM; @@ -232,7 +176,7 @@ static int ohci_urb_enqueue ( memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *)); INIT_LIST_HEAD (&urb_priv->pending); urb_priv->length = size; - urb_priv->ed = ed; + urb_priv->ed = ed; /* allocate the TDs (deferring hash chain updates) */ for (i = 0; i < size; i++) { @@ -242,7 +186,7 @@ static int ohci_urb_enqueue ( urb_free_priv (ohci, urb_priv); return -ENOMEM; } - } + } spin_lock_irqsave (&ohci->lock, flags); @@ -313,13 +257,13 @@ static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); unsigned long flags; - + #ifdef OHCI_VERBOSE_DEBUG urb_print (urb, "UNLINK", 1); -#endif +#endif spin_lock_irqsave (&ohci->lock, flags); - if (HC_IS_RUNNING(hcd->state)) { + if (HC_IS_RUNNING(hcd->state)) { urb_priv_t *urb_priv; /* Unless an IRQ completed the unlink while it was being @@ -512,11 +456,11 @@ static int ohci_init (struct ohci_hcd *ohci) /* Start an OHCI controller, set the BUS operational * resets USB and controller - * enable interrupts + * enable interrupts */ static int ohci_run (struct ohci_hcd *ohci) { - u32 mask, temp; + u32 mask, temp; int first = ohci->fminterval == 0; struct usb_hcd *hcd = ohci_to_hcd(ohci); @@ -534,7 +478,7 @@ static int ohci_run (struct ohci_hcd *ohci) /* also: power/overcurrent flags in roothub.a */ } - /* Reset USB nearly "by the book". RemoteWakeupConnected was + /* Reset USB nearly "by the book". RemoteWakeupConnected was * saved if boot firmware (BIOS/SMM/...) told us it's connected, * or if bus glue did the same (e.g. for PCI add-in cards with * PCI PM support). @@ -765,9 +709,9 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) dl_done_list (ohci); spin_unlock (&ohci->lock); if (HC_IS_RUNNING(hcd->state)) - ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable); + ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable); } - + /* could track INTR_SO to reduce available PCI/... bandwidth */ /* handle any pending URB/ED unlinks, leaving INTR_SF enabled @@ -778,12 +722,12 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) finish_unlinks (ohci, ohci_frame_no(ohci)); if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list && HC_IS_RUNNING(hcd->state)) - ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable); + ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable); spin_unlock (&ohci->lock); if (HC_IS_RUNNING(hcd->state)) { ohci_writel (ohci, ints, ®s->intrstatus); - ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable); + ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable); // flush those writes (void) ohci_readl (ohci, &ohci->regs->control); } @@ -794,7 +738,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) /*-------------------------------------------------------------------------*/ static void ohci_stop (struct usb_hcd *hcd) -{ +{ struct ohci_hcd *ohci = hcd_to_ohci (hcd); ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n", @@ -812,8 +756,8 @@ static void ohci_stop (struct usb_hcd *hcd) remove_debug_files (ohci); ohci_mem_cleanup (ohci); if (ohci->hcca) { - dma_free_coherent (hcd->self.controller, - sizeof *ohci->hcca, + dma_free_coherent (hcd->self.controller, + sizeof *ohci->hcca, ohci->hcca, ohci->hcca_dma); ohci->hcca = NULL; ohci->hcca_dma = 0; @@ -836,7 +780,7 @@ static int ohci_restart (struct ohci_hcd *ohci) * recycle any "live" eds/tds (and urbs) right away. * later, khubd disconnect processing will recycle the other state, * (either as disconnect/reconnect, or maybe someday as a reset). - */ + */ spin_lock_irq(&ohci->lock); disable (ohci); usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub); @@ -875,11 +819,11 @@ static int ohci_restart (struct ohci_hcd *ohci) /* empty the interrupt branches */ for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0; for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0; - + /* no EDs to remove */ ohci->ed_rm_list = NULL; - /* empty control and bulk lists */ + /* empty control and bulk lists */ ohci->ed_controltail = NULL; ohci->ed_bulktail = NULL; @@ -941,6 +885,10 @@ MODULE_LICENSE ("GPL"); #include "ohci-au1xxx.c" #endif +#ifdef CONFIG_PNX8550 +#include "ohci-pnx8550.c" +#endif + #ifdef CONFIG_USB_OHCI_HCD_PPC_SOC #include "ohci-ppc-soc.c" #endif diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 2441642cb7b..216c9c9d4d6 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -1,9 +1,9 @@ /* * OHCI HCD (Host Controller Driver) for USB. - * + * * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net> - * + * * This file is licenced under GPL */ @@ -23,13 +23,13 @@ (temp & RH_PS_PSSC) ? " PSSC" : "", \ (temp & RH_PS_PESC) ? " PESC" : "", \ (temp & RH_PS_CSC) ? " CSC" : "", \ - \ + \ (temp & RH_PS_LSDA) ? " LSDA" : "", \ (temp & RH_PS_PPS) ? " PPS" : "", \ (temp & RH_PS_PRS) ? " PRS" : "", \ (temp & RH_PS_POCI) ? " POCI" : "", \ (temp & RH_PS_PSS) ? " PSS" : "", \ - \ + \ (temp & RH_PS_PES) ? " PES" : "", \ (temp & RH_PS_CCS) ? " CCS" : "" \ ); @@ -484,7 +484,7 @@ ohci_hub_descriptor ( temp = 0; if (rh & RH_A_NPS) /* no power switching? */ temp |= 0x0002; - if (rh & RH_A_PSM) /* per-port power switching? */ + if (rh & RH_A_PSM) /* per-port power switching? */ temp |= 0x0001; if (rh & RH_A_NOCP) /* no overcurrent reporting? */ temp |= 0x0010; @@ -555,7 +555,7 @@ static void start_hnp(struct ohci_hcd *ohci); #define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0) /* called from some task, normally khubd */ -static inline void root_port_reset (struct ohci_hcd *ohci, unsigned port) +static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port) { __hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port]; u32 temp; @@ -570,10 +570,13 @@ static inline void root_port_reset (struct ohci_hcd *ohci, unsigned port) /* spin until any current reset finishes */ for (;;) { temp = ohci_readl (ohci, portstat); + /* handle e.g. CardBus eject */ + if (temp == ~(u32)0) + return -ESHUTDOWN; if (!(temp & RH_PS_PRS)) break; udelay (500); - } + } if (!(temp & RH_PS_CCS)) break; @@ -586,6 +589,8 @@ static inline void root_port_reset (struct ohci_hcd *ohci, unsigned port) now = ohci_readl(ohci, &ohci->regs->fmnumber); } while (tick_before(now, reset_done)); /* caller synchronizes using PRSC */ + + return 0; } static int ohci_hub_control ( @@ -702,7 +707,7 @@ static int ohci_hub_control ( &ohci->regs->roothub.portstatus [wIndex]); break; case USB_PORT_FEAT_RESET: - root_port_reset (ohci, wIndex); + retval = root_port_reset (ohci, wIndex); break; default: goto error; diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index e121d97ed91..e9807cf73a2 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -38,7 +38,7 @@ static void lh7a404_start_hc(struct platform_device *dev) CSC_PWRCNT |= CSC_PWRCNT_USBH_EN; /* Enable clock */ udelay(1000); USBH_CMDSTATUS = OHCI_HCR; - + printk(KERN_DEBUG __FILE__ ": Clock to USB host has been enabled \n"); } @@ -89,7 +89,7 @@ int usb_hcd_lh7a404_probe (const struct hc_driver *driver, retval = -EBUSY; goto err1; } - + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { pr_debug("ioremap failed"); @@ -174,7 +174,7 @@ static const struct hc_driver ohci_lh7a404_hc_driver = { */ .start = ohci_lh7a404_start, .stop = ohci_stop, - .shutdown = ohci_shutdown, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -242,7 +242,7 @@ static int ohci_hcd_lh7a404_drv_resume(struct platform_device *dev) static struct platform_driver ohci_hcd_lh7a404_driver = { .probe = ohci_hcd_lh7a404_drv_probe, .remove = ohci_hcd_lh7a404_drv_remove, - .shutdown = usb_hcd_platform_shutdown, + .shutdown = usb_hcd_platform_shutdown, /*.suspend = ohci_hcd_lh7a404_drv_suspend, */ /*.resume = ohci_hcd_lh7a404_drv_resume, */ .driver = { diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c index d976614eebd..2f20d3dc895 100644 --- a/drivers/usb/host/ohci-mem.c +++ b/drivers/usb/host/ohci-mem.c @@ -1,24 +1,24 @@ /* * OHCI HCD (Host Controller Driver) for USB. - * + * * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> - * + * * This file is licenced under the GPL. */ /*-------------------------------------------------------------------------*/ /* - * There's basically three types of memory: + * OHCI deals with three types of memory: * - data used only by the HCD ... kmalloc is fine * - async and periodic schedules, shared by HC and HCD ... these * need to use dma_pool or dma_alloc_coherent * - driver buffers, read/written by HC ... the hcd glue or the * device driver provides us with dma addresses * - * There's also PCI "register" data, which is memory mapped. - * No memory seen by this driver is pagable. + * There's also "register" data, which is memory mapped. + * No memory seen by this driver (or any HCD) may be paged out. */ /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 9c02177de50..27be1f93688 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -447,7 +447,7 @@ static const struct hc_driver ohci_omap_hc_driver = { .reset = ohci_omap_init, .start = ohci_omap_start, .stop = ohci_omap_stop, - .shutdown = ohci_shutdown, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -533,7 +533,7 @@ static int ohci_omap_resume(struct platform_device *dev) static struct platform_driver ohci_hcd_omap_driver = { .probe = ohci_hcd_omap_drv_probe, .remove = ohci_hcd_omap_drv_remove, - .shutdown = usb_hcd_platform_shutdown, + .shutdown = usb_hcd_platform_shutdown, #ifdef CONFIG_PM .suspend = ohci_omap_suspend, .resume = ohci_omap_resume, diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 87441855278..596e0b41e60 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -3,17 +3,17 @@ * * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> - * + * * [ Initialisation is based on Linus' ] * [ uhci code and gregs ohci fragments ] * [ (C) Copyright 1999 Linus Torvalds ] * [ (C) Copyright 1999 Gregory P. Smith] - * + * * PCI Bus Glue * * This file is licenced under the GPL. */ - + #ifndef CONFIG_PCI #error "This file is PCI bus glue. CONFIG_PCI must be defined." #endif @@ -83,7 +83,7 @@ ohci_pci_start (struct usb_hcd *hcd) pci_dev_put(b); } - /* Check for Compaq's ZFMicro chipset, which needs short + /* Check for Compaq's ZFMicro chipset, which needs short * delays before control or bulk queues get re-activated * in finish_unlinks() */ @@ -238,8 +238,8 @@ static struct pci_driver ohci_pci_driver = { .shutdown = usb_hcd_pci_shutdown, }; - -static int __init ohci_hcd_pci_init (void) + +static int __init ohci_hcd_pci_init (void) { printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name); if (usb_disabled()) @@ -253,8 +253,8 @@ module_init (ohci_hcd_pci_init); /*-------------------------------------------------------------------------*/ -static void __exit ohci_hcd_pci_cleanup (void) -{ +static void __exit ohci_hcd_pci_cleanup (void) +{ pci_unregister_driver (&ohci_pci_driver); } module_exit (ohci_hcd_pci_cleanup); diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c index 7f26f9bdbaf..3a8cbfb6905 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-pnx4008.c @@ -4,7 +4,7 @@ * driver for Philips PNX4008 USB Host * * Authors: Dmitry Chigirev <source@mvista.com> - * Vitaly Wool <vitalywool@gmail.com> + * Vitaly Wool <vitalywool@gmail.com> * * register initialization is based on code examples provided by Philips * Copyright (c) 2005 Koninklijke Philips Electronics N.V. @@ -29,7 +29,7 @@ #include <asm/arch/irqs.h> #include <asm/arch/gpio.h> -#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64) +#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64) /* USB_CTRL bit defines */ #define USB_SLAVE_HCLK_EN (1 << 24) diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c new file mode 100644 index 00000000000..6922b91b170 --- /dev/null +++ b/drivers/usb/host/ohci-pnx8550.c @@ -0,0 +1,258 @@ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> + * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> + * (C) Copyright 2002 Hewlett-Packard Company + * (C) Copyright 2005 Embedded Alley Solutions, Inc. + * + * Bus Glue for PNX8550 + * + * Written by Christopher Hoover <ch@hpl.hp.com> + * Based on fragments of previous driver by Russell King et al. + * + * Modified for LH7A404 from ohci-sa1111.c + * by Durgesh Pattamatta <pattamattad@sharpsec.com> + * + * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c + * by Vitaly Wool <vitalywool@gmail.com> + * + * This file is licenced under the GPL. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <asm/mach-pnx8550/usb.h> +#include <asm/mach-pnx8550/int.h> +#include <asm/mach-pnx8550/pci.h> + +#ifndef CONFIG_PNX8550 +#error "This file is PNX8550 bus glue. CONFIG_PNX8550 must be defined." +#endif + +extern int usb_disabled(void); + +/*-------------------------------------------------------------------------*/ + +static void pnx8550_start_hc(struct platform_device *dev) +{ + /* + * Set register CLK48CTL to enable and 48MHz + */ + outl(0x00000003, PCI_BASE | 0x0004770c); + + /* + * Set register CLK12CTL to enable and 48MHz + */ + outl(0x00000003, PCI_BASE | 0x00047710); + + udelay(100); +} + +static void pnx8550_stop_hc(struct platform_device *dev) +{ + udelay(10); +} + + +/*-------------------------------------------------------------------------*/ + +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ + + +/** + * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + * + */ +int usb_hcd_pnx8550_probe (const struct hc_driver *driver, + struct platform_device *dev) +{ + int retval; + struct usb_hcd *hcd; + + if (dev->resource[0].flags != IORESOURCE_MEM || + dev->resource[1].flags != IORESOURCE_IRQ) { + dev_err (&dev->dev,"invalid resource type\n"); + return -ENOMEM; + } + + hcd = usb_create_hcd (driver, &dev->dev, "pnx8550"); + if (!hcd) + return -ENOMEM; + hcd->rsrc_start = dev->resource[0].start; + hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] " + "failed\n", hcd->rsrc_start, hcd->rsrc_len); + retval = -EBUSY; + goto err1; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n", + hcd->rsrc_start, hcd->rsrc_len); + retval = -ENOMEM; + goto err2; + } + + pnx8550_start_hc(dev); + + ohci_hcd_init(hcd_to_ohci(hcd)); + + retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT); + if (retval == 0) + return retval; + + pnx8550_stop_hc(dev); + iounmap(hcd->regs); + err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + err1: + usb_put_hcd(hcd); + return retval; +} + + +/* may be called without controller electrically present */ +/* may be called with controller, bus, and devices active */ + +/** + * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + * + */ +void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev) +{ + usb_remove_hcd(hcd); + pnx8550_stop_hc(dev); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +/*-------------------------------------------------------------------------*/ + +static int __devinit +ohci_pnx8550_start (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + int ret; + + ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci); + + if ((ret = ohci_init(ohci)) < 0) + return ret; + + if ((ret = ohci_run (ohci)) < 0) { + err ("can't start %s", hcd->self.bus_name); + ohci_stop (hcd); + return ret; + } + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static const struct hc_driver ohci_pnx8550_hc_driver = { + .description = hcd_name, + .product_desc = "PNX8550 OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .start = ohci_pnx8550_start, + .stop = ohci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +/*-------------------------------------------------------------------------*/ + +static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev) +{ + int ret; + + if (usb_disabled()) + return -ENODEV; + + ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev); + return ret; +} + +static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_hcd_pnx8550_remove(hcd, pdev); + return 0; +} + +MODULE_ALIAS("pnx8550-ohci"); + +static struct platform_driver ohci_hcd_pnx8550_driver = { + .driver = { + .name = "pnx8550-ohci", + }, + .probe = ohci_hcd_pnx8550_drv_probe, + .remove = ohci_hcd_pnx8550_drv_remove, +}; + +static int __init ohci_hcd_pnx8550_init (void) +{ + pr_debug (DRIVER_INFO " (pnx8550)"); + pr_debug ("block sizes: ed %d td %d\n", + sizeof (struct ed), sizeof (struct td)); + + return platform_driver_register(&ohci_hcd_pnx8550_driver); +} + +static void __exit ohci_hcd_pnx8550_cleanup (void) +{ + platform_driver_unregister(&ohci_hcd_pnx8550_driver); +} + +module_init (ohci_hcd_pnx8550_init); +module_exit (ohci_hcd_pnx8550_cleanup); diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index d9d1ae236bd..e1a7eb81731 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -5,7 +5,7 @@ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> * (C) Copyright 2002 Hewlett-Packard Company * (C) Copyright 2003-2005 MontaVista Software Inc. - * + * * Bus Glue for PPC On-Chip OHCI driver * Tested on Freescale MPC5200 and IBM STB04xxx * @@ -85,7 +85,7 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver, err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: - usb_put_hcd(hcd); + usb_put_hcd(hcd); return retval; } @@ -148,7 +148,7 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = { */ .start = ohci_ppc_soc_start, .stop = ohci_stop, - .shutdown = ohci_shutdown, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -197,7 +197,7 @@ static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev) static struct platform_driver ohci_hcd_ppc_soc_driver = { .probe = ohci_hcd_ppc_soc_drv_probe, .remove = ohci_hcd_ppc_soc_drv_remove, - .shutdown = usb_hcd_platform_shutdown, + .shutdown = usb_hcd_platform_shutdown, #ifdef CONFIG_PM /*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/ /*.resume = ohci_hcd_ppc_soc_drv_resume,*/ diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index e176b04d7ae..3bbea844a9e 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -47,7 +47,7 @@ static int pxa27x_ohci_select_pmm( int mode ) switch ( mode ) { case PMM_NPS_MODE: UHCRHDA |= RH_A_NPS; - break; + break; case PMM_GLOBAL_MODE: UHCRHDA &= ~(RH_A_NPS & RH_A_PSM); break; @@ -60,7 +60,7 @@ static int pxa27x_ohci_select_pmm( int mode ) break; default: printk( KERN_ERR - "Invalid mode %d, set to non-power switch mode.\n", + "Invalid mode %d, set to non-power switch mode.\n", mode ); UHCRHDA |= RH_A_NPS; @@ -270,7 +270,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { */ .start = ohci_pxa27x_start, .stop = ohci_stop, - .shutdown = ohci_shutdown, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -359,9 +359,9 @@ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) static struct platform_driver ohci_hcd_pxa27x_driver = { .probe = ohci_hcd_pxa27x_drv_probe, .remove = ohci_hcd_pxa27x_drv_remove, - .shutdown = usb_hcd_platform_shutdown, + .shutdown = usb_hcd_platform_shutdown, #ifdef CONFIG_PM - .suspend = ohci_hcd_pxa27x_drv_suspend, + .suspend = ohci_hcd_pxa27x_drv_suspend, .resume = ohci_hcd_pxa27x_drv_resume, #endif .driver = { diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index fe1fe2f97cb..830a3fe8615 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -1,9 +1,9 @@ /* * OHCI HCD (Host Controller Driver) for USB. - * + * * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> - * + * * This file is licenced under the GPL. */ @@ -89,7 +89,7 @@ __acquires(ohci->lock) /*-------------------------------------------------------------------------* * ED handling functions - *-------------------------------------------------------------------------*/ + *-------------------------------------------------------------------------*/ /* search for the right schedule branch to use for a periodic ed. * does some load balancing; returns the branch, or negative errno. @@ -107,7 +107,6 @@ static int balance (struct ohci_hcd *ohci, int interval, int load) */ for (i = 0; i < interval ; i++) { if (branch < 0 || ohci->load [branch] > ohci->load [i]) { -#if 1 /* CONFIG_USB_BANDWIDTH */ int j; /* usb 1.1 says 90% of one frame */ @@ -117,8 +116,7 @@ static int balance (struct ohci_hcd *ohci, int interval, int load) } if (j < NUM_INTS) continue; -#endif - branch = i; + branch = i; } } return branch; @@ -171,7 +169,7 @@ static void periodic_link (struct ohci_hcd *ohci, struct ed *ed) /* link an ed into one of the HC chains */ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed) -{ +{ int branch; if (ohci_to_hcd(ohci)->state == HC_STATE_QUIESCING) @@ -248,7 +246,7 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed) } ed->branch = branch; periodic_link (ohci, ed); - } + } /* the HC may not see the schedule updates yet, but if it does * then they'll be properly ordered. @@ -277,7 +275,7 @@ static void periodic_unlink (struct ohci_hcd *ohci, struct ed *ed) *prev = ed->ed_next; } ohci->load [i] -= ed->load; - } + } ohci_to_hcd(ohci)->self.bandwidth_allocated -= ed->load / ed->interval; ohci_vdbg (ohci, "unlink %sed %p branch %d [%dus.], interval %d\n", @@ -285,7 +283,7 @@ static void periodic_unlink (struct ohci_hcd *ohci, struct ed *ed) ed, ed->branch, ed->load, ed->interval); } -/* unlink an ed from one of the HC chains. +/* unlink an ed from one of the HC chains. * just the link to the ed is unlinked. * the link from the ed still points to another operational ed or 0 * so the HC can eventually finish the processing of the unlinked ed @@ -307,7 +305,7 @@ static void periodic_unlink (struct ohci_hcd *ohci, struct ed *ed) * When finish_unlinks() runs later, after SOF interrupt, it will often * complete one or more URB unlinks before making that state change. */ -static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed) +static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed) { ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP); wmb (); @@ -397,7 +395,7 @@ static struct ed *ed_get ( unsigned int pipe, int interval ) { - struct ed *ed; + struct ed *ed; unsigned long flags; spin_lock_irqsave (&ohci->lock, flags); @@ -413,9 +411,9 @@ static struct ed *ed_get ( goto done; } - /* dummy td; end of td list for ed */ + /* dummy td; end of td list for ed */ td = td_alloc (ohci, GFP_ATOMIC); - if (!td) { + if (!td) { /* out of memory */ ed_free (ohci, ed); ed = NULL; @@ -462,7 +460,7 @@ static struct ed *ed_get ( done: spin_unlock_irqrestore (&ohci->lock, flags); - return ed; + return ed; } /*-------------------------------------------------------------------------*/ @@ -474,7 +472,7 @@ done: * and that ed->state is ED_OPER */ static void start_ed_unlink (struct ohci_hcd *ohci, struct ed *ed) -{ +{ ed->hwINFO |= cpu_to_hc32 (ohci, ED_DEQUEUE); ed_deschedule (ohci, ed); @@ -541,7 +539,7 @@ td_fill (struct ohci_hcd *ohci, u32 info, td->ed = urb_priv->ed; td->next_dl_td = NULL; td->index = index; - td->urb = urb; + td->urb = urb; td->data_dma = data; if (!len) data = 0; @@ -553,8 +551,8 @@ td_fill (struct ohci_hcd *ohci, u32 info, (data & 0x0FFF) | 0xE000); td->ed->last_iso = info & 0xffff; } else { - td->hwCBP = cpu_to_hc32 (ohci, data); - } + td->hwCBP = cpu_to_hc32 (ohci, data); + } if (data) td->hwBE = cpu_to_hc32 (ohci, data + len - 1); else @@ -597,7 +595,7 @@ static void td_submit_urb ( * use the device toggle bits for resetting, and rely on the fact * that resetting toggle is meaningless if the endpoint is active. */ - if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) { + if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) { usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out, 1); urb_priv->ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_C); @@ -721,16 +719,16 @@ static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td) list_del (&td->td_list); /* ISO ... drivers see per-TD length/status */ - if (tdINFO & TD_ISO) { - u16 tdPSW = ohci_hwPSW (ohci, td, 0); + if (tdINFO & TD_ISO) { + u16 tdPSW = ohci_hwPSW (ohci, td, 0); int dlen = 0; /* NOTE: assumes FC in tdINFO == 0, and that * only the first of 0..MAXPSW psws is used. */ - cc = (tdPSW >> 12) & 0xF; - if (tdINFO & TD_CC) /* hc didn't touch? */ + cc = (tdPSW >> 12) & 0xF; + if (tdINFO & TD_CC) /* hc didn't touch? */ return; if (usb_pipeout (urb->pipe)) @@ -758,7 +756,7 @@ static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td) int type = usb_pipetype (urb->pipe); u32 tdBE = hc32_to_cpup (ohci, &td->hwBE); - cc = TD_CC_GET (tdINFO); + cc = TD_CC_GET (tdINFO); /* update packet status if needed (short is normally ok) */ if (cc == TD_DATAUNDERRUN @@ -787,7 +785,7 @@ static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td) urb, td, 1 + td->index, cc, urb->actual_length, urb->transfer_buffer_length); - } + } } /*-------------------------------------------------------------------------*/ @@ -795,7 +793,7 @@ static void td_done (struct ohci_hcd *ohci, struct urb *urb, struct td *td) static inline struct td * ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev) { - struct urb *urb = td->urb; + struct urb *urb = td->urb; struct ed *ed = td->ed; struct list_head *tmp = td->td_list.next; __hc32 toggle = ed->hwHeadP & cpu_to_hc32 (ohci, ED_C); @@ -805,7 +803,7 @@ ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev) */ ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP); wmb (); - ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H); + ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H); /* put any later tds from this urb onto the donelist, after 'td', * order won't matter here: no errors, and nothing was transferred. @@ -833,7 +831,7 @@ ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev) info &= ~cpu_to_hc32 (ohci, TD_CC); next->hwINFO = info; - next->next_dl_td = rev; + next->next_dl_td = rev; rev = next; ed->hwHeadP = next->hwNextTD | toggle; @@ -881,8 +879,8 @@ static struct td *dl_reverse_done_list (struct ohci_hcd *ohci) /* get TD from hc's singly linked list, and * prepend to ours. ed->td_list changes later. */ - while (td_dma) { - int cc; + while (td_dma) { + int cc; td = dma_to_td (ohci, td_dma); if (!td) { @@ -901,10 +899,10 @@ static struct td *dl_reverse_done_list (struct ohci_hcd *ohci) && (td->ed->hwHeadP & cpu_to_hc32 (ohci, ED_H))) td_rev = ed_halted (ohci, td, cc, td_rev); - td->next_dl_td = td_rev; + td->next_dl_td = td_rev; td_rev = td; td_dma = hc32_to_cpup (ohci, &td->hwNextTD); - } + } return td_rev; } @@ -1013,9 +1011,9 @@ rescan_this: if (modified) goto rescan_all; - } + } - /* maybe reenable control and bulk lists */ + /* maybe reenable control and bulk lists */ if (HC_IS_RUNNING(ohci_to_hcd(ohci)->state) && ohci_to_hcd(ohci)->state != HC_STATE_QUIESCING && !ohci->ed_rm_list) { @@ -1041,20 +1039,20 @@ rescan_this: &ohci->regs->ed_bulkcurrent); } } - + /* CLE/BLE to enable, CLF/BLF to (maybe) kickstart */ if (control) { ohci->hc_control |= control; if (ohci->flags & OHCI_QUIRK_ZFMICRO) mdelay(1); - ohci_writel (ohci, ohci->hc_control, - &ohci->regs->control); - } + ohci_writel (ohci, ohci->hc_control, + &ohci->regs->control); + } if (command) { if (ohci->flags & OHCI_QUIRK_ZFMICRO) mdelay(1); - ohci_writel (ohci, command, &ohci->regs->cmdstatus); - } + ohci_writel (ohci, command, &ohci->regs->cmdstatus); + } } } @@ -1074,19 +1072,19 @@ dl_done_list (struct ohci_hcd *ohci) { struct td *td = dl_reverse_done_list (ohci); - while (td) { + while (td) { struct td *td_next = td->next_dl_td; struct urb *urb = td->urb; urb_priv_t *urb_priv = urb->hcpriv; struct ed *ed = td->ed; /* update URB's length and status from TD */ - td_done (ohci, urb, td); - urb_priv->td_cnt++; + td_done (ohci, urb, td); + urb_priv->td_cnt++; /* If all this urb's TDs are done, call complete() */ - if (urb_priv->td_cnt == urb_priv->length) - finish_urb (ohci, urb); + if (urb_priv->td_cnt == urb_priv->length) + finish_urb (ohci, urb); /* clean schedule: unlink EDs that are no longer busy */ if (list_empty (&ed->td_list)) { @@ -1094,25 +1092,26 @@ dl_done_list (struct ohci_hcd *ohci) start_ed_unlink (ohci, ed); /* ... reenabling halted EDs only after fault cleanup */ - } else if ((ed->hwINFO & cpu_to_hc32 (ohci, ED_SKIP | ED_DEQUEUE)) + } else if ((ed->hwINFO & cpu_to_hc32 (ohci, + ED_SKIP | ED_DEQUEUE)) == cpu_to_hc32 (ohci, ED_SKIP)) { td = list_entry (ed->td_list.next, struct td, td_list); - if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) { + if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) { ed->hwINFO &= ~cpu_to_hc32 (ohci, ED_SKIP); /* ... hc may need waking-up */ switch (ed->type) { case PIPE_CONTROL: ohci_writel (ohci, OHCI_CLF, - &ohci->regs->cmdstatus); + &ohci->regs->cmdstatus); break; case PIPE_BULK: ohci_writel (ohci, OHCI_BLF, - &ohci->regs->cmdstatus); + &ohci->regs->cmdstatus); break; } } } - td = td_next; - } + td = td_next; + } } diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 59e436424d4..b350d45033e 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -447,7 +447,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { */ .start = ohci_s3c2410_start, .stop = ohci_stop, - .shutdown = ohci_shutdown, + .shutdown = ohci_shutdown, /* * managing i/o requests and associated device resources @@ -492,7 +492,7 @@ static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev) static struct platform_driver ohci_hcd_s3c2410_driver = { .probe = ohci_hcd_s3c2410_drv_probe, .remove = ohci_hcd_s3c2410_drv_remove, - .shutdown = usb_hcd_platform_shutdown, + .shutdown = usb_hcd_platform_shutdown, /*.suspend = ohci_hcd_s3c2410_drv_suspend, */ /*.resume = ohci_hcd_s3c2410_drv_resume, */ .driver = { diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 71371de32ad..fe0090e3367 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -4,7 +4,7 @@ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> * (C) Copyright 2002 Hewlett-Packard Company - * + * * SA1111 Bus Glue * * Written by Christopher Hoover <ch@hpl.hp.com> @@ -12,7 +12,7 @@ * * This file is licenced under the GPL. */ - + #include <asm/hardware.h> #include <asm/mach-types.h> #include <asm/arch/assabet.h> @@ -31,7 +31,7 @@ static void sa1111_start_hc(struct sa1111_dev *dev) { unsigned int usb_rst = 0; - printk(KERN_DEBUG __FILE__ + printk(KERN_DEBUG __FILE__ ": starting SA-1111 OHCI USB Controller\n"); #ifdef CONFIG_SA1100_BADGE4 @@ -65,7 +65,7 @@ static void sa1111_start_hc(struct sa1111_dev *dev) static void sa1111_stop_hc(struct sa1111_dev *dev) { unsigned int usb_rst; - printk(KERN_DEBUG __FILE__ + printk(KERN_DEBUG __FILE__ ": stopping SA-1111 OHCI USB Controller\n"); /* diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index a2f42a2f47c..405257f3e85 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -1,9 +1,9 @@ /* * OHCI HCD (Host Controller Driver) for USB. - * + * * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> - * + * * This file is licenced under the GPL. */ @@ -14,7 +14,7 @@ */ typedef __u32 __bitwise __hc32; typedef __u16 __bitwise __hc16; - + /* * OHCI Endpoint Descriptor (ED) ... holds TD queue * See OHCI spec, section 4.2 @@ -24,7 +24,7 @@ typedef __u16 __bitwise __hc16; */ struct ed { /* first fields are hardware-specified */ - __hc32 hwINFO; /* endpoint config bitmap */ + __hc32 hwINFO; /* endpoint config bitmap */ /* info bits defined by hcd */ #define ED_DEQUEUE (1 << 27) /* info bits defined by the hardware */ @@ -52,11 +52,11 @@ struct ed { * usually: OPER --> UNLINK --> (IDLE | OPER) --> ... */ u8 state; /* ED_{IDLE,UNLINK,OPER} */ -#define ED_IDLE 0x00 /* NOT linked to HC */ -#define ED_UNLINK 0x01 /* being unlinked from hc */ +#define ED_IDLE 0x00 /* NOT linked to HC */ +#define ED_UNLINK 0x01 /* being unlinked from hc */ #define ED_OPER 0x02 /* IS linked to hc */ - u8 type; /* PIPE_{BULK,...} */ + u8 type; /* PIPE_{BULK,...} */ /* periodic scheduling params (for intr and iso) */ u8 branch; @@ -70,7 +70,7 @@ struct ed { #define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */ - + /* * OHCI Transfer Descriptor (TD) ... one per transfer segment * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt) @@ -107,22 +107,22 @@ struct td { /* (no hwINFO #defines yet for iso tds) */ - __hc32 hwCBP; /* Current Buffer Pointer (or 0) */ - __hc32 hwNextTD; /* Next TD Pointer */ - __hc32 hwBE; /* Memory Buffer End Pointer */ + __hc32 hwCBP; /* Current Buffer Pointer (or 0) */ + __hc32 hwNextTD; /* Next TD Pointer */ + __hc32 hwBE; /* Memory Buffer End Pointer */ /* PSW is only for ISO. Only 1 PSW entry is used, but on * big-endian PPC hardware that's the second entry. */ #define MAXPSW 2 - __hc16 hwPSW [MAXPSW]; + __hc16 hwPSW [MAXPSW]; /* rest are purely for the driver's use */ - __u8 index; - struct ed *ed; - struct td *td_hash; /* dma-->td hashtable */ - struct td *next_dl_td; - struct urb *urb; + __u8 index; + struct ed *ed; + struct td *td_hash; /* dma-->td hashtable */ + struct td *next_dl_td; + struct urb *urb; dma_addr_t td_dma; /* addr of this TD */ dma_addr_t data_dma; /* addr of data it points to */ @@ -152,8 +152,8 @@ struct td { #define TD_NOTACCESSED 0x0F -/* map OHCI TD status codes (CC) to errno values */ -static const int cc_to_error [16] = { +/* map OHCI TD status codes (CC) to errno values */ +static const int cc_to_error [16] = { /* No Error */ 0, /* CRC Error */ -EILSEQ, /* Bit Stuff */ -EPROTO, @@ -169,7 +169,7 @@ static const int cc_to_error [16] = { /* BufferOver */ -ECOMM, /* BuffUnder */ -ENOSR, /* (for HCD) */ -EALREADY, - /* (for HCD) */ -EALREADY + /* (for HCD) */ -EALREADY }; @@ -182,7 +182,7 @@ struct ohci_hcca { #define NUM_INTS 32 __hc32 int_table [NUM_INTS]; /* periodic schedule */ - /* + /* * OHCI defines u16 frame_no, followed by u16 zero pad. * Since some processors can't do 16 bit bus accesses, * portable access must be a 32 bits wide. @@ -262,10 +262,10 @@ struct ohci_regs { * HcCommandStatus (cmdstatus) register masks */ #define OHCI_HCR (1 << 0) /* host controller reset */ -#define OHCI_CLF (1 << 1) /* control list filled */ -#define OHCI_BLF (1 << 2) /* bulk list filled */ -#define OHCI_OCR (1 << 3) /* ownership change request */ -#define OHCI_SOC (3 << 16) /* scheduling overrun count */ +#define OHCI_CLF (1 << 1) /* control list filled */ +#define OHCI_BLF (1 << 2) /* bulk list filled */ +#define OHCI_OCR (1 << 3) /* ownership change request */ +#define OHCI_SOC (3 << 16) /* scheduling overrun count */ /* * masks used with interrupt registers: @@ -285,20 +285,20 @@ struct ohci_regs { /* OHCI ROOT HUB REGISTER MASKS */ - + /* roothub.portstatus [i] bits */ -#define RH_PS_CCS 0x00000001 /* current connect status */ -#define RH_PS_PES 0x00000002 /* port enable status*/ -#define RH_PS_PSS 0x00000004 /* port suspend status */ -#define RH_PS_POCI 0x00000008 /* port over current indicator */ -#define RH_PS_PRS 0x00000010 /* port reset status */ -#define RH_PS_PPS 0x00000100 /* port power status */ -#define RH_PS_LSDA 0x00000200 /* low speed device attached */ -#define RH_PS_CSC 0x00010000 /* connect status change */ -#define RH_PS_PESC 0x00020000 /* port enable status change */ -#define RH_PS_PSSC 0x00040000 /* port suspend status change */ -#define RH_PS_OCIC 0x00080000 /* over current indicator change */ -#define RH_PS_PRSC 0x00100000 /* port reset status change */ +#define RH_PS_CCS 0x00000001 /* current connect status */ +#define RH_PS_PES 0x00000002 /* port enable status*/ +#define RH_PS_PSS 0x00000004 /* port suspend status */ +#define RH_PS_POCI 0x00000008 /* port over current indicator */ +#define RH_PS_PRS 0x00000010 /* port reset status */ +#define RH_PS_PPS 0x00000100 /* port power status */ +#define RH_PS_LSDA 0x00000200 /* low speed device attached */ +#define RH_PS_CSC 0x00010000 /* connect status change */ +#define RH_PS_PESC 0x00020000 /* port enable status change */ +#define RH_PS_PSSC 0x00040000 /* port suspend status change */ +#define RH_PS_OCIC 0x00080000 /* over current indicator change */ +#define RH_PS_PRSC 0x00100000 /* port reset status change */ /* roothub.status bits */ #define RH_HS_LPS 0x00000001 /* local power status */ @@ -333,7 +333,7 @@ typedef struct urb_priv { } urb_priv_t; #define TD_HASH_SIZE 64 /* power'o'two */ -// sizeof (struct td) ~= 64 == 2^6 ... +// sizeof (struct td) ~= 64 == 2^6 ... #define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE) @@ -364,11 +364,11 @@ struct ohci_hcd { struct ed *ed_bulktail; /* last in bulk list */ struct ed *ed_controltail; /* last in ctrl list */ - struct ed *periodic [NUM_INTS]; /* shadow int_table */ + struct ed *periodic [NUM_INTS]; /* shadow int_table */ /* * OTG controllers and transceivers need software interaction; - * other external transceivers should be software-transparent + * other external transceivers should be software-transparent */ struct otg_transceiver *transceiver; @@ -385,7 +385,7 @@ struct ohci_hcd { */ int num_ports; int load [NUM_INTS]; - u32 hc_control; /* copy of hc control reg */ + u32 hc_control; /* copy of hc control reg */ unsigned long next_statechange; /* suspend/resume */ u32 fminterval; /* saved register */ unsigned autostop:1; /* rh auto stopping/stopped */ @@ -598,11 +598,11 @@ static inline void disable (struct ohci_hcd *ohci) } #define FI 0x2edf /* 12000 bits per frame (-1) */ -#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7)) +#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7)) #define FIT (1 << 31) #define LSTHRESH 0x628 /* lowspeed bit threshold */ -static void periodic_reinit (struct ohci_hcd *ohci) +static inline void periodic_reinit (struct ohci_hcd *ohci) { u32 fi = ohci->fminterval & 0x03fff; u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT; @@ -626,11 +626,11 @@ static void periodic_reinit (struct ohci_hcd *ohci) temp = ohci_readl (hc, &hc->regs->roothub.register); \ temp; }) -static u32 roothub_a (struct ohci_hcd *hc) +static inline u32 roothub_a (struct ohci_hcd *hc) { return read_roothub (hc, a, 0xfc0fe000); } static inline u32 roothub_b (struct ohci_hcd *hc) { return ohci_readl (hc, &hc->regs->roothub.b); } static inline u32 roothub_status (struct ohci_hcd *hc) { return ohci_readl (hc, &hc->regs->roothub.status); } -static u32 roothub_portstatus (struct ohci_hcd *hc, int i) +static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i) { return read_roothub (hc, portstatus [i], 0xffe0fce0); } diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index a9d7119e317..a7fa0d75567 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -40,6 +40,7 @@ #include <linux/moduleparam.h> #include <linux/delay.h> #include <linux/ioport.h> +#include <linux/pci_ids.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/smp_lock.h> @@ -210,15 +211,16 @@ struct u132 { * these cannot be inlines because we need the structure offset!! * Does anyone have a better way????? */ +#define ftdi_read_pcimem(pdev, member, data) usb_ftdi_elan_read_pcimem(pdev, \ + offsetof(struct ohci_regs, member), 0, data); +#define ftdi_write_pcimem(pdev, member, data) usb_ftdi_elan_write_pcimem(pdev, \ + offsetof(struct ohci_regs, member), 0, data); #define u132_read_pcimem(u132, member, data) \ usb_ftdi_elan_read_pcimem(u132->platform_dev, offsetof(struct \ ohci_regs, member), 0, data); #define u132_write_pcimem(u132, member, data) \ usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \ ohci_regs, member), 0, data); -#define u132_write_pcimem_byte(u132, member, data) \ - usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \ - ohci_regs, member), 0x0e, data); static inline struct u132 *udev_to_u132(struct u132_udev *udev) { u8 udev_number = udev->udev_number; @@ -1574,59 +1576,12 @@ static char *hcfs2string(int state) return "?"; } -static int u132_usb_reset(struct u132 *u132) -{ - int retval; - retval = u132_read_pcimem(u132, control, &u132->hc_control); - if (retval) - return retval; - u132->hc_control &= OHCI_CTRL_RWC; - retval = u132_write_pcimem(u132, control, u132->hc_control); - if (retval) - return retval; - return 0; -} - static int u132_init(struct u132 *u132) { int retval; u32 control; u132_disable(u132); - u132->next_statechange = - jiffies; /* SMM owns the HC? not for long! */ { - u32 control; - retval = u132_read_pcimem(u132, control, &control); - if (retval) - return retval; - if (control & OHCI_CTRL_IR) { - u32 temp = 50; - retval = u132_write_pcimem(u132, intrenable, - OHCI_INTR_OC); - if (retval) - return retval; - retval = u132_write_pcimem_byte(u132, cmdstatus, - OHCI_OCR); - if (retval) - return retval; - check:{ - retval = u132_read_pcimem(u132, control, - &control); - if (retval) - return retval; - } - if (control & OHCI_CTRL_IR) { - msleep(10); - if (--temp == 0) { - dev_err(&u132->platform_dev->dev, "USB " - "HC takeover failed!(BIOS/SMM b" - "ug) control=%08X\n", control); - return -EBUSY; - } - goto check; - } - u132_usb_reset(u132); - } - } + u132->next_statechange = jiffies; retval = u132_write_pcimem(u132, intrdisable, OHCI_INTR_MIE); if (retval) return retval; @@ -1725,7 +1680,7 @@ static int u132_run(struct u132 *u132) retry:retval = u132_read_pcimem(u132, cmdstatus, &status); if (retval) return retval; - retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_HCR); + retval = u132_write_pcimem(u132, cmdstatus, OHCI_HCR); if (retval) return retval; extra:{ @@ -1782,7 +1737,7 @@ static int u132_run(struct u132 *u132) retval = u132_write_pcimem(u132, control, u132->hc_control); if (retval) return retval; - retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_BLF); + retval = u132_write_pcimem(u132, cmdstatus, OHCI_BLF); if (retval) return retval; retval = u132_read_pcimem(u132, cmdstatus, &cmdstatus); @@ -1839,8 +1794,8 @@ static void u132_hcd_stop(struct usb_hcd *hcd) { struct u132 *u132 = hcd_to_u132(hcd); if (u132->going > 1) { - dev_err(&u132->platform_dev->dev, "device has been removed %d\n" - , u132->going); + dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p) has b" + "een removed %d\n", u132, hcd, u132->going); } else if (u132->going > 0) { dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov" "ed\n", hcd); @@ -2545,8 +2500,9 @@ static void u132_endpoint_disable(struct usb_hcd *hcd, { struct u132 *u132 = hcd_to_u132(hcd); if (u132->going > 2) { - dev_err(&u132->platform_dev->dev, "device has been removed %d\n" - , u132->going); + dev_err(&u132->platform_dev->dev, "u132 device %p(hcd=%p hep=%p" + ") has been removed %d\n", u132, hcd, hep, + u132->going); } else { struct u132_endp *endp = hep->hcpriv; if (endp) @@ -2790,7 +2746,6 @@ static int u132_hub_status_data(struct usb_hcd *hcd, char *buf) } else if (u132->going > 0) { dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov" "ed\n", hcd); - dump_stack(); return -ESHUTDOWN; } else { int i, changed = 0, length = 1; @@ -3034,12 +2989,15 @@ static int __devexit u132_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); if (hcd) { struct u132 *u132 = hcd_to_u132(hcd); - dump_stack(); if (u132->going++ > 1) { + dev_err(&u132->platform_dev->dev, "already being remove" + "d\n"); return -ENODEV; } else { int rings = MAX_U132_RINGS; int endps = MAX_U132_ENDPS; + dev_err(&u132->platform_dev->dev, "removing device u132" + ".%d\n", u132->sequence_num); msleep(100); down(&u132->sw_lock); u132_monitor_cancel_work(u132); @@ -3121,10 +3079,24 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev) static int __devinit u132_probe(struct platform_device *pdev) { struct usb_hcd *hcd; + int retval; + u32 control; + u32 rh_a = -1; + u32 num_ports; msleep(100); if (u132_exiting > 0) { return -ENODEV; - } /* refuse to confuse usbcore */ + } + retval = ftdi_write_pcimem(pdev, intrdisable, OHCI_INTR_MIE); + if (retval) + return retval; + retval = ftdi_read_pcimem(pdev, control, &control); + if (retval) + return retval; + retval = ftdi_read_pcimem(pdev, roothub.a, &rh_a); + if (retval) + return retval; + num_ports = rh_a & RH_A_NDP; /* refuse to confuse usbcore */ if (pdev->dev.dma_mask) { return -EINVAL; } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index e87692c31be..acd101caeee 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -60,6 +60,11 @@ Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \ Alan Stern" #define DRIVER_DESC "USB Universal Host Controller Interface driver" +/* for flakey hardware, ignore overcurrent indicators */ +static int ignore_oc; +module_param(ignore_oc, bool, S_IRUGO); +MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications"); + /* * debug = 0, no debugging messages * debug = 1, dump failed URBs except for stalls @@ -169,6 +174,11 @@ static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci) { int port; + /* If we have to ignore overcurrent events then almost by definition + * we can't depend on resume-detect interrupts. */ + if (ignore_oc) + return 1; + switch (to_pci_dev(uhci_dev(uhci))->vendor) { default: break; @@ -921,7 +931,8 @@ static int __init uhci_hcd_init(void) { int retval = -ENOMEM; - printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "\n"); + printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "%s\n", + ignore_oc ? ", overcurrent ignored" : ""); if (usb_disabled()) return -ENODEV; diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index f8347f1a10b..bacc25c53ba 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -52,10 +52,20 @@ static int any_ports_active(struct uhci_hcd *uhci) static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf) { int port; + int mask = RWC_BITS; + + /* Some boards (both VIA and Intel apparently) report bogus + * overcurrent indications, causing massive log spam unless + * we completely ignore them. This doesn't seem to be a problem + * with the chipset so much as with the way it is connected on + * the motherboard; if the overcurrent input is left to float + * then it may constantly register false positives. */ + if (ignore_oc) + mask &= ~USBPORTSC_OCC; *buf = 0; for (port = 0; port < uhci->rh_numports; ++port) { - if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & RWC_BITS) || + if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & mask) || test_bit(port, &uhci->port_c_suspend)) *buf |= (1 << (port + 1)); } @@ -263,7 +273,7 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, wPortChange |= USB_PORT_STAT_C_CONNECTION; if (status & USBPORTSC_PEC) wPortChange |= USB_PORT_STAT_C_ENABLE; - if (status & USBPORTSC_OCC) + if ((status & USBPORTSC_OCC) && !ignore_oc) wPortChange |= USB_PORT_STAT_C_OVERCURRENT; if (test_bit(port, &uhci->port_c_suspend)) { diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c index e7cc20ab815..12b42746ded 100644 --- a/drivers/usb/input/wacom_sys.c +++ b/drivers/usb/input/wacom_sys.c @@ -159,13 +159,13 @@ void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3); - input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0); + input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); } void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); - input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); } void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) diff --git a/drivers/usb/input/wacom_wac.c b/drivers/usb/input/wacom_wac.c index 92726fe8937..4142e36730f 100644 --- a/drivers/usb/input/wacom_wac.c +++ b/drivers/usb/input/wacom_wac.c @@ -209,13 +209,15 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04); } - } - - if (data[1] & 0x10) wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ + } else wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ - wacom_report_key(wcombo, wacom->tool[0], data[1] & 0x10); + + if (data[1] & 0x10) /* only report prox-in when in area */ + wacom_report_key(wcombo, wacom->tool[0], 1); + if (!(data[1] & 0x90)) /* report prox-out when physically out */ + wacom_report_key(wcombo, wacom->tool[0], 0); wacom_input_sync(wcombo); /* send pad data */ @@ -405,7 +407,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40)) return 0; - if (wacom->features->type >= INTUOS3) { + if (wacom->features->type >= INTUOS3S) { wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1)); wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1)); wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f)); @@ -423,7 +425,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) if (data[1] & 0x02) { /* Rotation packet */ - if (wacom->features->type >= INTUOS3) { + if (wacom->features->type >= INTUOS3S) { /* I3 marker pen rotation reported as wheel * due to valuator limitation */ @@ -547,11 +549,11 @@ static struct wacom_features wacom_features[] = { { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 63, GRAPHIRE }, { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 63, WACOM_G4 }, { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 }, - { "Wacom Volito", 8, 5104, 3712, 511, 0, GRAPHIRE }, - { "Wacom PenStation2", 8, 3250, 2320, 255, 0, GRAPHIRE }, - { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 0, GRAPHIRE }, - { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 0, GRAPHIRE }, - { "Wacom PenPartner2", 8, 3250, 2320, 255, 0, GRAPHIRE }, + { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE }, + { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE }, + { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE }, + { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE }, + { "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE }, { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 63, INTUOS }, { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 63, INTUOS }, { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 63, INTUOS }, @@ -580,7 +582,7 @@ static struct wacom_features wacom_features[] = { { "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 63, INTUOS3L }, { "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 63, INTUOS3L }, { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 63, INTUOS3 }, - { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 15, INTUOS3S }, + { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 63, INTUOS3S }, { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 63, INTUOS }, { } diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index 6c7f3efb1d4..b5332e679c4 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -1376,7 +1376,7 @@ static int auerchar_open (struct inode *inode, struct file *file) } /* we have access to the device. Now lets allocate memory */ - ccp = (pauerchar_t) kmalloc(sizeof(auerchar_t), GFP_KERNEL); + ccp = kzalloc(sizeof(auerchar_t), GFP_KERNEL); if (ccp == NULL) { err ("out of memory"); ret = -ENOMEM; @@ -1384,7 +1384,6 @@ static int auerchar_open (struct inode *inode, struct file *file) } /* Initialize device descriptor */ - memset( ccp, 0, sizeof(auerchar_t)); init_MUTEX( &ccp->mutex); init_MUTEX( &ccp->readmutex); auerbuf_init (&ccp->bufctl); @@ -1912,14 +1911,13 @@ static int auerswald_probe (struct usb_interface *intf, return -ENODEV; /* allocate memory for our device and initialize it */ - cp = kmalloc (sizeof(auerswald_t), GFP_KERNEL); + cp = kzalloc (sizeof(auerswald_t), GFP_KERNEL); if (cp == NULL) { err ("out of memory"); goto pfail; } /* Initialize device descriptor */ - memset (cp, 0, sizeof(auerswald_t)); init_MUTEX (&cp->mutex); cp->usbdev = usbdev; auerchain_init (&cp->controlchain); diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 18b1925032a..41c0161abdb 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -40,6 +40,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/ioctl.h> +#include <linux/pci_ids.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/kref.h> @@ -51,6 +52,10 @@ MODULE_AUTHOR("Tony Olech"); MODULE_DESCRIPTION("FTDI ELAN driver"); MODULE_LICENSE("GPL"); #define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444) +static int distrust_firmware = 1; +module_param(distrust_firmware, bool, 0); +MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren" + "t setup"); extern struct platform_driver u132_platform_driver; static struct workqueue_struct *status_queue; static struct workqueue_struct *command_queue; @@ -66,7 +71,9 @@ static struct list_head ftdi_static_list; * end of the global variables protected by ftdi_module_lock */ #include "usb_u132.h" -#define TD_DEVNOTRESP 5 +#include <asm/io.h> +#include "../core/hcd.h" +#include "../host/ohci.h" /* Define these values to match your devices*/ #define USB_FTDI_ELAN_VENDOR_ID 0x0403 #define USB_FTDI_ELAN_PRODUCT_ID 0xd6ea @@ -551,7 +558,7 @@ static void ftdi_elan_status_work(struct work_struct *work) } else { dev_err(&ftdi->udev->dev, "initialized failed - trying " "again in 10 seconds\n"); - work_delay_in_msec = 10 *1000; + work_delay_in_msec = 1 *1000; } } else if (ftdi->registered == 0) { work_delay_in_msec = 10; @@ -2288,82 +2295,288 @@ static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi) } } -static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi) + +#define ftdi_read_pcimem(ftdi, member, data) ftdi_elan_read_pcimem(ftdi, \ + offsetof(struct ohci_regs, member), 0, data); +#define ftdi_write_pcimem(ftdi, member, data) ftdi_elan_write_pcimem(ftdi, \ + offsetof(struct ohci_regs, member), 0, data); +#define OHCI_QUIRK_AMD756 0x01 +#define OHCI_QUIRK_SUPERIO 0x02 +#define OHCI_QUIRK_INITRESET 0x04 +#define OHCI_BIG_ENDIAN 0x08 +#define OHCI_QUIRK_ZFMICRO 0x10 +#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR +#define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \ + OHCI_INTR_WDH) +static int ftdi_elan_check_controller(struct usb_ftdi *ftdi, int quirk) +{ + int devices = 0; + int retval; + u32 hc_control; + int num_ports; + u32 control; + u32 rh_a = -1; + u32 status; + u32 fminterval; + u32 hc_fminterval; + u32 periodicstart; + u32 cmdstatus; + u32 roothub_a; + int mask = OHCI_INTR_INIT; + int sleep_time = 0; + int reset_timeout = 30; /* ... allow extra time */ + int temp; + retval = ftdi_write_pcimem(ftdi, intrdisable, OHCI_INTR_MIE); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, roothub.a, &rh_a); + if (retval) + return retval; + num_ports = rh_a & RH_A_NDP; + retval = ftdi_read_pcimem(ftdi, fminterval, &hc_fminterval); + if (retval) + return retval; + hc_fminterval &= 0x3fff; + if (hc_fminterval != FI) { + } + hc_fminterval |= FSMP(hc_fminterval) << 16; + retval = ftdi_read_pcimem(ftdi, control, &hc_control); + if (retval) + return retval; + switch (hc_control & OHCI_CTRL_HCFS) { + case OHCI_USB_OPER: + sleep_time = 0; + break; + case OHCI_USB_SUSPEND: + case OHCI_USB_RESUME: + hc_control &= OHCI_CTRL_RWC; + hc_control |= OHCI_USB_RESUME; + sleep_time = 10; + break; + default: + hc_control &= OHCI_CTRL_RWC; + hc_control |= OHCI_USB_RESET; + sleep_time = 50; + break; + } + retval = ftdi_write_pcimem(ftdi, control, hc_control); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; + msleep(sleep_time); + retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a); + if (retval) + return retval; + if (!(roothub_a & RH_A_NPS)) { /* power down each port */ + for (temp = 0; temp < num_ports; temp++) { + retval = ftdi_write_pcimem(ftdi, + roothub.portstatus[temp], RH_PS_LSDA); + if (retval) + return retval; + } + } + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; + retry:retval = ftdi_read_pcimem(ftdi, cmdstatus, &status); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_HCR); + if (retval) + return retval; + extra:{ + retval = ftdi_read_pcimem(ftdi, cmdstatus, &status); + if (retval) + return retval; + if (0 != (status & OHCI_HCR)) { + if (--reset_timeout == 0) { + dev_err(&ftdi->udev->dev, "USB HC reset timed o" + "ut!\n"); + return -ENODEV; + } else { + msleep(5); + goto extra; + } + } + } + if (quirk & OHCI_QUIRK_INITRESET) { + retval = ftdi_write_pcimem(ftdi, control, hc_control); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; + } + retval = ftdi_write_pcimem(ftdi, ed_controlhead, 0x00000000); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, ed_bulkhead, 0x11000000); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, hcca, 0x00000000); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, fminterval, + ((fminterval & FIT) ^ FIT) | hc_fminterval); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, periodicstart, + ((9 *hc_fminterval) / 10) & 0x3fff); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, fminterval, &fminterval); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, periodicstart, &periodicstart); + if (retval) + return retval; + if (0 == (fminterval & 0x3fff0000) || 0 == periodicstart) { + if (!(quirk & OHCI_QUIRK_INITRESET)) { + quirk |= OHCI_QUIRK_INITRESET; + goto retry; + } else + dev_err(&ftdi->udev->dev, "init err(%08x %04x)\n", + fminterval, periodicstart); + } /* start controller operations */ + hc_control &= OHCI_CTRL_RWC; + hc_control |= OHCI_CONTROL_INIT | OHCI_CTRL_BLE | OHCI_USB_OPER; + retval = ftdi_write_pcimem(ftdi, control, hc_control); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, cmdstatus, OHCI_BLF); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, cmdstatus, &cmdstatus); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_DRWE); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, intrstatus, mask); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, intrdisable, + OHCI_INTR_MIE | OHCI_INTR_OC | OHCI_INTR_RHSC | OHCI_INTR_FNO | + OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_SF | OHCI_INTR_WDH | + OHCI_INTR_SO); + if (retval) + return retval; /* handle root hub init quirks ... */ + retval = ftdi_read_pcimem(ftdi, roothub.a, &roothub_a); + if (retval) + return retval; + roothub_a &= ~(RH_A_PSM | RH_A_OCPM); + if (quirk & OHCI_QUIRK_SUPERIO) { + roothub_a |= RH_A_NOCP; + roothub_a &= ~(RH_A_POTPGT | RH_A_NPS); + retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a); + if (retval) + return retval; + } else if ((quirk & OHCI_QUIRK_AMD756) || distrust_firmware) { + roothub_a |= RH_A_NPS; + retval = ftdi_write_pcimem(ftdi, roothub.a, roothub_a); + if (retval) + return retval; + } + retval = ftdi_write_pcimem(ftdi, roothub.status, RH_HS_LPSC); + if (retval) + return retval; + retval = ftdi_write_pcimem(ftdi, roothub.b, + (roothub_a & RH_A_NPS) ? 0 : RH_B_PPCM); + if (retval) + return retval; + retval = ftdi_read_pcimem(ftdi, control, &control); + if (retval) + return retval; + mdelay((roothub_a >> 23) & 0x1fe); + for (temp = 0; temp < num_ports; temp++) { + u32 portstatus; + retval = ftdi_read_pcimem(ftdi, roothub.portstatus[temp], + &portstatus); + if (retval) + return retval; + if (1 & portstatus) + devices += 1; + } + return devices; +} + +static int ftdi_elan_setup_controller(struct usb_ftdi *ftdi, int fn) { u32 latence_timer; - u32 controlreg; int UxxxStatus; u32 pcidata; int reg = 0; - int foundOHCI = 0; - u8 fn; - int activePCIfn = 0; - u32 pciVID = 0; - u32 pciPID = 0; - UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); - if (UxxxStatus) - return UxxxStatus; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L); - if (UxxxStatus) - return UxxxStatus; - msleep(750); - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100); + int activePCIfn = fn << 8; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800); if (UxxxStatus) return UxxxStatus; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500); + reg = 16; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, + 0xFFFFFFFF); if (UxxxStatus) return UxxxStatus; - UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); if (UxxxStatus) return UxxxStatus; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000); + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, + 0xF0000000); if (UxxxStatus) return UxxxStatus; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000); + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); if (UxxxStatus) return UxxxStatus; - msleep(250); - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000); + reg = 12; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &latence_timer); if (UxxxStatus) return UxxxStatus; - UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + latence_timer &= 0xFFFF00FF; + latence_timer |= 0x00001600; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, + latence_timer); if (UxxxStatus) return UxxxStatus; - UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800); + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); if (UxxxStatus) return UxxxStatus; - UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + reg = 4; + UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, + 0x06); if (UxxxStatus) return UxxxStatus; - UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); if (UxxxStatus) return UxxxStatus; - msleep(1000); - for (fn = 0; (fn < 4) && (!foundOHCI); fn++) { - activePCIfn = fn << 8; - ftdi->function = fn + 1; - UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, - &pcidata); + for (reg = 0; reg <= 0x54; reg += 4) { + UxxxStatus = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); if (UxxxStatus) return UxxxStatus; - pciVID = pcidata & 0xFFFF; - pciPID = (pcidata >> 16) & 0xFFFF; - if ((pciVID == 0x1045) && (pciPID == 0xc861)) { - foundOHCI = 1; - } else if ((pciVID == 0x1033) && (pciPID == 0x0035)) { - foundOHCI = 1; - } else if ((pciVID == 0x10b9) && (pciPID == 0x5237)) { - foundOHCI = 1; - } else if ((pciVID == 0x11c1) && (pciPID == 0x5802)) { - foundOHCI = 1; - } else if ((pciVID == 0x11AB) && (pciPID == 0x1FA6)) { - } - } - if (foundOHCI == 0) { - return -ENXIO; } - ftdi->platform_data.vendor = pciVID; - ftdi->platform_data.device = pciPID; + return 0; +} + +static int ftdi_elan_close_controller(struct usb_ftdi *ftdi, int fn) +{ + u32 latence_timer; + int UxxxStatus; + u32 pcidata; + int reg = 0; + int activePCIfn = fn << 8; UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800); if (UxxxStatus) return UxxxStatus; @@ -2377,7 +2590,7 @@ static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi) if (UxxxStatus) return UxxxStatus; UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0, - 0xF0000000); + 0x00000000); if (UxxxStatus) return UxxxStatus; UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, @@ -2401,7 +2614,7 @@ static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi) return UxxxStatus; reg = 4; UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00, - 0x06); + 0x00); if (UxxxStatus) return UxxxStatus; UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, @@ -2411,159 +2624,139 @@ static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi) return 0; } +static int ftdi_elan_found_controller(struct usb_ftdi *ftdi, int fn, int quirk) +{ + int result; + int UxxxStatus; + UxxxStatus = ftdi_elan_setup_controller(ftdi, fn); + if (UxxxStatus) + return UxxxStatus; + result = ftdi_elan_check_controller(ftdi, quirk); + UxxxStatus = ftdi_elan_close_controller(ftdi, fn); + if (UxxxStatus) + return UxxxStatus; + return result; +} + +static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi) +{ + u32 controlreg; + u8 sensebits; + int UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L); + if (UxxxStatus) + return UxxxStatus; + msleep(750); + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000); + if (UxxxStatus) + return UxxxStatus; + msleep(250); + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg); + if (UxxxStatus) + return UxxxStatus; + msleep(1000); + sensebits = (controlreg >> 16) & 0x000F; + if (0x0D == sensebits) + return 0; + else + return - ENXIO; +} + static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi) { + int UxxxStatus; u32 pcidata; - int U132Status; - int reg; - int reset_repeat = 0; - do_reset:reg = 8; - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x01); - if (U132Status) - return U132Status; - reset_check:{ - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - if (pcidata & 1) { - msleep(500); - if (reset_repeat++ > 100) { - reset_repeat = 0; - goto do_reset; - } else - goto reset_check; + int reg = 0; + u8 fn; + int activePCIfn = 0; + int max_devices = 0; + int controllers = 0; + int unrecognized = 0; + ftdi->function = 0; + for (fn = 0; (fn < 4); fn++) { + u32 pciVID = 0; + u32 pciPID = 0; + int devices = 0; + activePCIfn = fn << 8; + UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0, + &pcidata); + if (UxxxStatus) + return UxxxStatus; + pciVID = pcidata & 0xFFFF; + pciPID = (pcidata >> 16) & 0xFFFF; + if ((pciVID == PCI_VENDOR_ID_OPTI) && (pciPID == 0xc861)) { + devices = ftdi_elan_found_controller(ftdi, fn, 0); + controllers += 1; + } else if ((pciVID == PCI_VENDOR_ID_NEC) && (pciPID == 0x0035)) + { + devices = ftdi_elan_found_controller(ftdi, fn, 0); + controllers += 1; + } else if ((pciVID == PCI_VENDOR_ID_AL) && (pciPID == 0x5237)) { + devices = ftdi_elan_found_controller(ftdi, fn, 0); + controllers += 1; + } else if ((pciVID == PCI_VENDOR_ID_ATT) && (pciPID == 0x5802)) + { + devices = ftdi_elan_found_controller(ftdi, fn, 0); + controllers += 1; + } else if (pciVID == PCI_VENDOR_ID_AMD && pciPID == 0x740c) { + devices = ftdi_elan_found_controller(ftdi, fn, + OHCI_QUIRK_AMD756); + controllers += 1; + } else if (pciVID == PCI_VENDOR_ID_COMPAQ && pciPID == 0xa0f8) { + devices = ftdi_elan_found_controller(ftdi, fn, + OHCI_QUIRK_ZFMICRO); + controllers += 1; + } else if (0 == pcidata) { + } else + unrecognized += 1; + if (devices > max_devices) { + max_devices = devices; + ftdi->function = fn + 1; + ftdi->platform_data.vendor = pciVID; + ftdi->platform_data.device = pciPID; } } - goto dump_regs; - msleep(500); - reg = 0x28; - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x11000000); - if (U132Status) - return U132Status; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 0x40; - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf); - if (U132Status) - return U132Status; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 0x34; - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf2edf); - if (U132Status) - return U132Status; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 4; - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0xA0); - if (U132Status) - return U132Status; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - msleep(250); - reg = 8; - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x04); - if (U132Status) - return U132Status; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 0x28; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 8; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 0x48; - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x00001200); - if (U132Status) - return U132Status; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 0x54; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 0x58; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 0x34; - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x28002edf); - if (U132Status) - return U132Status; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - msleep(100); - reg = 0x50; - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10000); - if (U132Status) - return U132Status; - reg = 0x54; - power_check:U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - if (!(pcidata & 1)) { - msleep(500); - goto power_check; - } - msleep(3000); - reg = 0x54; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 0x58; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 0x54; - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02); - if (U132Status) - return U132Status; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 0x54; - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10); - if (U132Status) - return U132Status; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - msleep(750); - reg = 0x54; - if (0) { - U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02); - if (U132Status) - return U132Status; - } - if (0) { - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - } - reg = 0x54; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - reg = 0x58; - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; - dump_regs:for (reg = 0; reg <= 0x54; reg += 4) { - U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata); - if (U132Status) - return U132Status; + if (ftdi->function > 0) { + UxxxStatus = ftdi_elan_setup_controller(ftdi, + ftdi->function - 1); + if (UxxxStatus) + return UxxxStatus; + return 0; + } else if (controllers > 0) { + return -ENXIO; + } else if (unrecognized > 0) { + return -ENXIO; + } else { + ftdi->enumerated = 0; + return -ENXIO; } - return 0; } @@ -2688,6 +2881,7 @@ static void ftdi_elan_disconnect(struct usb_interface *interface) platform_device_unregister(&ftdi->platform_dev); ftdi->synchronized = 0; ftdi->enumerated = 0; + ftdi->initialized = 0; ftdi->registered = 0; } flush_workqueue(status_queue); diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c index 7163f05c5b2..0d9de2f7393 100644 --- a/drivers/usb/misc/phidgetservo.c +++ b/drivers/usb/misc/phidgetservo.c @@ -282,6 +282,7 @@ servo_probe(struct usb_interface *interface, const struct usb_device_id *id) dev->dev = NULL; goto out; } + dev_set_drvdata(dev->dev, dev); servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1; diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c index 33cd91d11ec..67e2fc20eee 100644 --- a/drivers/usb/misc/trancevibrator.c +++ b/drivers/usb/misc/trancevibrator.c @@ -120,8 +120,8 @@ static void tv_disconnect(struct usb_interface *interface) struct trancevibrator *dev; dev = usb_get_intfdata (interface); - usb_set_intfdata(interface, NULL); device_remove_file(&interface->dev, &dev_attr_speed); + usb_set_intfdata(interface, NULL); usb_put_dev(dev->udev); kfree(dev); } diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c index a3242be2195..a6f0f4d934d 100644 --- a/drivers/usb/net/gl620a.c +++ b/drivers/usb/net/gl620a.c @@ -79,160 +79,6 @@ struct gl_header { struct gl_packet packets; }; -#ifdef GENELINK_ACK - -// FIXME: this code is incomplete, not debugged; it doesn't -// handle interrupts correctly; it should use the generic -// status IRQ code (which didn't exist back in 2001). - -struct gl_priv { - struct urb *irq_urb; - char irq_buf [INTERRUPT_BUFSIZE]; -}; - -static inline int gl_control_write(struct usbnet *dev, u8 request, u16 value) -{ - int retval; - - retval = usb_control_msg(dev->udev, - usb_sndctrlpipe(dev->udev, 0), - request, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - value, - 0, // index - 0, // data buffer - 0, // size - USB_CTRL_SET_TIMEOUT); - return retval; -} - -static void gl_interrupt_complete(struct urb *urb) -{ - int status = urb->status; - - switch (status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __FUNCTION__, status); - return; - default: - dbg("%s - nonzero urb status received: %d", - __FUNCTION__, urb->status); - } - - status = usb_submit_urb(urb, GFP_ATOMIC); - if (status) - err("%s - usb_submit_urb failed with result %d", - __FUNCTION__, status); -} - -static int gl_interrupt_read(struct usbnet *dev) -{ - struct gl_priv *priv = dev->priv_data; - int retval; - - // issue usb interrupt read - if (priv && priv->irq_urb) { - // submit urb - if ((retval = usb_submit_urb(priv->irq_urb, GFP_KERNEL)) != 0) - dbg("gl_interrupt_read: submit fail - %X...", retval); - else - dbg("gl_interrupt_read: submit success..."); - } - - return 0; -} - -// check whether another side is connected -static int genelink_check_connect(struct usbnet *dev) -{ - int retval; - - dbg("genelink_check_connect..."); - - // detect whether another side is connected - if ((retval = gl_control_write(dev, GENELINK_CONNECT_WRITE, 0)) != 0) { - dbg("%s: genelink_check_connect write fail - %X", - dev->net->name, retval); - return retval; - } - - // usb interrupt read to ack another side - if ((retval = gl_interrupt_read(dev)) != 0) { - dbg("%s: genelink_check_connect read fail - %X", - dev->net->name, retval); - return retval; - } - - dbg("%s: genelink_check_connect read success", dev->net->name); - return 0; -} - -// allocate and initialize the private data for genelink -static int genelink_init(struct usbnet *dev) -{ - struct gl_priv *priv; - - // allocate the private data structure - if ((priv = kmalloc(sizeof *priv, GFP_KERNEL)) == 0) { - dbg("%s: cannot allocate private data per device", - dev->net->name); - return -ENOMEM; - } - - // allocate irq urb - if ((priv->irq_urb = usb_alloc_urb(0, GFP_KERNEL)) == 0) { - dbg("%s: cannot allocate private irq urb per device", - dev->net->name); - kfree(priv); - return -ENOMEM; - } - - // fill irq urb - usb_fill_int_urb(priv->irq_urb, dev->udev, - usb_rcvintpipe(dev->udev, GENELINK_INTERRUPT_PIPE), - priv->irq_buf, INTERRUPT_BUFSIZE, - gl_interrupt_complete, 0, - GENELINK_INTERRUPT_INTERVAL); - - // set private data pointer - dev->priv_data = priv; - - return 0; -} - -// release the private data -static int genelink_free(struct usbnet *dev) -{ - struct gl_priv *priv = dev->priv_data; - - if (!priv) - return 0; - -// FIXME: can't cancel here; it's synchronous, and -// should have happened earlier in any case (interrupt -// handling needs to be generic) - - // cancel irq urb first - usb_kill_urb(priv->irq_urb); - - // free irq urb - usb_free_urb(priv->irq_urb); - - // free the private data structure - kfree(priv); - - return 0; -} - -#endif - static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb) { struct gl_header *header; diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index c54235f73cb..e0eecda78ec 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -124,10 +124,11 @@ #define RX_URB_FAIL 3 /* Define these values to match your device */ -#define VENDOR_ID_REALTEK 0x0bda +#define VENDOR_ID_REALTEK 0x0bda #define VENDOR_ID_MELCO 0x0411 -#define VENDOR_ID_MICRONET 0x3980 +#define VENDOR_ID_MICRONET 0x3980 #define VENDOR_ID_LONGSHINE 0x07b8 +#define VENDOR_ID_OQO 0x1557 #define VENDOR_ID_ZYXEL 0x0586 #define PRODUCT_ID_RTL8150 0x8150 @@ -144,6 +145,7 @@ static struct usb_device_id rtl8150_table[] = { {USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)}, {USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)}, {USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)}, + {USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)}, {USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)}, {} }; diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 96c73726d74..f2ca76a9cba 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -19,8 +19,11 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */ { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */ + { USB_DEVICE(0x1410, 0x1130) }, /* Novatel Wireless S720 CDMA/EV-DO */ + { USB_DEVICE(0x1410, 0x2110) }, /* Novatel Wireless U720 CDMA/EV-DO */ { USB_DEVICE(0x1410, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */ { USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */ + { USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless HSDPA 5500 */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 2f9b7ac3266..7ebaffd6ed8 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -69,6 +69,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { } /* Terminating Entry */ }; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 45cdf9bc43b..6bc1f404e18 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -962,21 +962,6 @@ static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsi cypress_set_termios(port, &priv->tmp_termios); return (0); break; - /* these are called when setting baud rate from gpsd */ - case TCGETS: - if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) { - return -EFAULT; - } - return (0); - break; - case TCSETS: - if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) { - return -EFAULT; - } - /* here we need to call cypress_set_termios to invoke the new settings */ - cypress_set_termios(port, &priv->tmp_termios); - return (0); - break; /* This code comes from drivers/char/serial.c and ftdi_sio.c */ case TIOCMIWAIT: while (priv != NULL) { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 41b0ad2d56a..6986e756f7c 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -452,6 +452,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) }, { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) }, { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) }, { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index bae117d359a..40dd394de58 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -312,8 +312,9 @@ /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ /* unit for PIC16's/PIC18's */ -#define FTDI_CCSICDU20_0_PID 0xF9D0 -#define FTDI_CCSICDU40_1_PID 0xF9D1 +#define FTDI_CCSICDU20_0_PID 0xF9D0 +#define FTDI_CCSICDU40_1_PID 0xF9D1 +#define FTDI_CCSMACHX_2_PID 0xF9D2 /* Inside Accesso contactless reader (http://www.insidefr.com) */ #define INSIDE_ACCESSO 0xFAD0 diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index 77b977206a8..d3be9214c7c 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -14,6 +14,9 @@ #include <linux/module.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <asm/uaccess.h> + +static int debug; static struct usb_device_id id_table [] = { { USB_DEVICE(0x1404, 0xcddc) }, @@ -21,6 +24,26 @@ static struct usb_device_id id_table [] = { }; MODULE_DEVICE_TABLE(usb, id_table); +static int funsoft_ioctl(struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct termios t; + + dbg("%s - port %d, cmd 0x%04x", __FUNCTION__, port->number, cmd); + + if (cmd == TCSETSF) { + if (user_termios_to_kernel_termios(&t, (void __user *)arg)) + return -EFAULT; + + dbg("%s - iflag:%x oflag:%x cflag:%x lflag:%x", __FUNCTION__, + t.c_iflag, t.c_oflag, t.c_cflag, t.c_lflag); + + if (!(t.c_lflag & ICANON)) + return -EINVAL; + } + return -ENOIOCTLCMD; +} + static struct usb_driver funsoft_driver = { .name = "funsoft", .probe = usb_serial_probe, @@ -39,6 +62,7 @@ static struct usb_serial_driver funsoft_device = { .num_bulk_in = NUM_DONT_CARE, .num_bulk_out = NUM_DONT_CARE, .num_ports = 1, + .ioctl = funsoft_ioctl, }; static int __init funsoft_init(void) @@ -63,3 +87,6 @@ static void __exit funsoft_exit(void) module_init(funsoft_init); module_exit(funsoft_exit); MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 73d755df484..5c4b06a99ac 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -87,10 +87,6 @@ static int klsi_105_write_room (struct usb_serial_port *port); static void klsi_105_read_bulk_callback (struct urb *urb); static void klsi_105_set_termios (struct usb_serial_port *port, struct ktermios *old); -static int klsi_105_ioctl (struct usb_serial_port *port, - struct file * file, - unsigned int cmd, - unsigned long arg); static void klsi_105_throttle (struct usb_serial_port *port); static void klsi_105_unthrottle (struct usb_serial_port *port); /* @@ -140,7 +136,6 @@ static struct usb_serial_driver kl5kusb105d_device = { .chars_in_buffer = klsi_105_chars_in_buffer, .write_room = klsi_105_write_room, .read_bulk_callback =klsi_105_read_bulk_callback, - .ioctl = klsi_105_ioctl, .set_termios = klsi_105_set_termios, /*.break_ctl = klsi_105_break_ctl,*/ .tiocmget = klsi_105_tiocmget, @@ -899,69 +894,6 @@ static int klsi_105_tiocmset (struct usb_serial_port *port, struct file *file, */ return retval; } - -static int klsi_105_ioctl (struct usb_serial_port *port, struct file * file, - unsigned int cmd, unsigned long arg) -{ - struct klsi_105_private *priv = usb_get_serial_port_data(port); - void __user *user_arg = (void __user *)arg; - - dbg("%scmd=0x%x", __FUNCTION__, cmd); - - /* Based on code from acm.c and others */ - switch (cmd) { - case TIOCMIWAIT: - /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/ - /* TODO */ - dbg("%s - TIOCMIWAIT not handled", __FUNCTION__); - return -ENOIOCTLCMD; - case TIOCGICOUNT: - /* return count of modemline transitions */ - /* TODO */ - dbg("%s - TIOCGICOUNT not handled", __FUNCTION__); - return -ENOIOCTLCMD; - case TCGETS: - /* return current info to caller */ - dbg("%s - TCGETS data faked/incomplete", __FUNCTION__); - - if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct termios))) - return -EFAULT; - - if (kernel_termios_to_user_termios((struct termios __user *)arg, - &priv->termios)) - return -EFAULT; - return 0; - case TCSETS: - /* set port termios to the one given by the user */ - dbg("%s - TCSETS not handled", __FUNCTION__); - - if (!access_ok(VERIFY_READ, user_arg, sizeof(struct termios))) - return -EFAULT; - - if (user_termios_to_kernel_termios(&priv->termios, - (struct termios __user *)arg)) - return -EFAULT; - klsi_105_set_termios(port, &priv->termios); - return 0; - case TCSETSW: { - /* set port termios and try to wait for completion of last - * write operation */ - /* We guess here. If there are not too many write urbs - * outstanding, we lie. */ - /* what is the right way to wait here? schedule() ? */ - /* - while (klsi_105_chars_in_buffer(port) > (NUM_URBS / 4 ) * URB_TRANSFER_BUFFER_SIZE) - schedule(); - */ - return -ENOIOCTLCMD; - } - default: - dbg("%s: arg not supported - 0x%04x", __FUNCTION__,cmd); - return(-ENOIOCTLCMD); - break; - } - return 0; -} /* klsi_105_ioctl */ static void klsi_105_throttle (struct usb_serial_port *port) { diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 8cc728a49e4..83f661403ba 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2460,12 +2460,6 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, tty_ldisc_deref(ld); return 0; - case TCGETS: - if (kernel_termios_to_user_termios - ((struct termios __user *)argp, tty->termios)) - return -EFAULT; - return 0; - case TIOCSERGETLSR: dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number); return mos7840_get_lsr_info(mos7840_port, argp); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 0ae4098718c..819266b7e2f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -79,6 +79,7 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_PRODUCT_COBRA 0x6500 #define OPTION_PRODUCT_COBRA2 0x6600 #define HUAWEI_PRODUCT_E600 0x1001 +#define HUAWEI_PRODUCT_E220 0x1003 #define AUDIOVOX_PRODUCT_AIRCARD 0x0112 #define NOVATELWIRELESS_PRODUCT_U740 0x1400 #define ANYDATA_PRODUCT_ID 0x6501 @@ -90,6 +91,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, @@ -103,6 +105,7 @@ static struct usb_device_id option_ids1[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index db8b26012c7..5fe7ff441a0 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -153,6 +153,13 @@ UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), +/* Reported by <honkkis@gmail.com> */ +UNUSUAL_DEV( 0x0421, 0x0433, 0x0100, 0x0100, + "Nokia", + "E70", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + /* Reported by Jon Hart <Jon.Hart@web.de> */ UNUSUAL_DEV( 0x0421, 0x0434, 0x0100, 0x0100, "Nokia", @@ -1328,6 +1335,15 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* This prevents the kernel from detecting the virtual cd-drive with the + * Windows drivers. <johann.wilhelm@student.tugraz.at> +*/ +UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0xffff, + "HUAWEI", + "E220 USB-UMTS Install", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE), + /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */ UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001, "Minolta", |