aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/class/cdc-acm.c1
-rw-r--r--drivers/usb/core/hub.c2
-rw-r--r--drivers/usb/core/quirks.c7
-rw-r--r--drivers/usb/gadget/s3c2410_udc.c4
-rw-r--r--drivers/usb/host/xhci-mem.c26
-rw-r--r--drivers/usb/host/xhci-ring.c11
-rw-r--r--drivers/usb/host/xhci.c2
-rw-r--r--drivers/usb/host/xhci.h2
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c5
-rw-r--r--drivers/usb/musb/tusb6010.c13
-rw-r--r--drivers/usb/serial/ftdi_sio.c9
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h15
-rw-r--r--drivers/usb/serial/option.c4
-rw-r--r--drivers/usb/serial/qcserial.c2
-rw-r--r--drivers/usb/serial/sierra.c1
-rw-r--r--drivers/usb/storage/transport.c4
16 files changed, 84 insertions, 24 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 61d75507d5d..162c95a088e 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1596,6 +1596,7 @@ static const struct usb_device_id acm_ids[] = {
{ NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
+ { NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 83e7bbbe97f..70cccc75a36 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1982,6 +1982,8 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
(portstatus & USB_PORT_STAT_ENABLE)) {
if (hub_is_wusb(hub))
udev->speed = USB_SPEED_WIRELESS;
+ else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+ udev->speed = USB_SPEED_SUPER;
else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
udev->speed = USB_SPEED_HIGH;
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f22d03df8b1..db99c084df9 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -41,6 +41,10 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Philips PSC805 audio device */
{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Artisman Watchdog Dongle */
+ { USB_DEVICE(0x04b4, 0x0526), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -64,6 +68,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
+ /* Broadcom BCM92035DGROM BT dongle */
+ { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index e724a051bfd..ea2b3c7ebee 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -735,6 +735,10 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
else
dev->ep0state = EP0_OUT_DATA_PHASE;
+ if (!dev->driver)
+ return;
+
+ /* deliver the request to the gadget driver */
ret = dev->driver->setup(&dev->gadget, crq);
if (ret < 0) {
if (dev->req_config) {
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fd9e03afd91..2eb658d2639 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -835,6 +835,27 @@ fail:
return 0;
}
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+ struct usb_device *udev)
+{
+ struct xhci_virt_device *virt_dev;
+ struct xhci_ep_ctx *ep0_ctx;
+ struct xhci_ring *ep_ring;
+
+ virt_dev = xhci->devs[udev->slot_id];
+ ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
+ ep_ring = virt_dev->eps[0].ring;
+ /*
+ * FIXME we don't keep track of the dequeue pointer very well after a
+ * Set TR dequeue pointer, so we're setting the dequeue pointer of the
+ * host to our enqueue pointer. This should only be called after a
+ * configured device has reset, so all control transfers should have
+ * been completed or cancelled before the reset.
+ */
+ ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
+ ep0_ctx->deq |= ep_ring->cycle_state;
+}
+
/* Setup an xHCI virtual device for a Set Address command */
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
{
@@ -1002,7 +1023,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
return EP_INTERVAL(interval);
}
-/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
+/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
* High speed endpoint descriptors can define "the number of additional
* transaction opportunities per microframe", but that goes in the Max Burst
* endpoint context field.
@@ -1010,7 +1031,8 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
- if (udev->speed != USB_SPEED_SUPER)
+ if (udev->speed != USB_SPEED_SUPER ||
+ !usb_endpoint_xfer_isoc(&ep->desc))
return 0;
return ep->ss_ep_comp.bmAttributes;
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 94e6934edb0..bfc99a93945 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2380,16 +2380,19 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
u32 field3, u32 field4, bool command_must_succeed)
{
int reserved_trbs = xhci->cmd_ring_reserved_trbs;
+ int ret;
+
if (!command_must_succeed)
reserved_trbs++;
- if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) {
- if (!in_interrupt())
- xhci_err(xhci, "ERR: No room for command on command ring\n");
+ ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
+ reserved_trbs, GFP_ATOMIC);
+ if (ret < 0) {
+ xhci_err(xhci, "ERR: No room for command on command ring\n");
if (command_must_succeed)
xhci_err(xhci, "ERR: Reserved TRB counting for "
"unfailable commands failed.\n");
- return -ENOMEM;
+ return ret;
}
queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
field4 | xhci->cmd_ring->cycle_state);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 27345cd04da..3998f72cd0c 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2134,6 +2134,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
/* If this is a Set Address to an unconfigured device, setup ep 0 */
if (!udev->config)
xhci_setup_addressable_virt_dev(xhci, udev);
+ else
+ xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
/* Otherwise, assume the core has the device configured how it wants */
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8b4b7d39f79..6c7e3430ec9 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1292,6 +1292,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+ struct usb_device *udev);
unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 30d930386b6..d25814c172b 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2436,7 +2436,8 @@ sisusb_open(struct inode *inode, struct file *file)
}
if (!sisusb->devinit) {
- if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) {
+ if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH ||
+ sisusb->sisusb_dev->speed == USB_SPEED_SUPER) {
if (sisusb_init_gfxdevice(sisusb, 0)) {
mutex_unlock(&sisusb->lock);
dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n");
@@ -3166,7 +3167,7 @@ static int sisusb_probe(struct usb_interface *intf,
sisusb->present = 1;
- if (dev->speed == USB_SPEED_HIGH) {
+ if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) {
int initscreen = 1;
#ifdef INCL_SISUSB_CON
if (sisusb_first_vc > 0 &&
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 05c077f8f9a..3c48e77a0aa 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -29,19 +29,6 @@ static void tusb_source_power(struct musb *musb, int is_on);
#define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf)
#define TUSB_REV_MINOR(reg_val) (reg_val & 0xf)
-#ifdef CONFIG_PM
-/* REVISIT: These should be only needed if somebody implements off idle */
-void musb_platform_save_context(struct musb *musb,
- struct musb_context_registers *musb_context)
-{
-}
-
-void musb_platform_restore_context(struct musb *musb,
- struct musb_context_registers *musb_context)
-{
-}
-#endif
-
/*
* Checks the revision. We need to use the DMA register as 3.0 does not
* have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index da7e334b040..e298dc4baed 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -691,6 +691,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
@@ -737,6 +738,14 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index bbc159a1df4..d01946db8fa 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -696,6 +696,12 @@
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
/*
+ * RT Systems programming cables for various ham radios
+ */
+#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
+#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
+
+/*
* Bayer Ascensia Contour blood glucose meter USB-converter cable.
* http://winglucofacts.com/cables/
*/
@@ -1017,3 +1023,12 @@
#define MJSG_SR_RADIO_PID 0x9379
#define MJSG_XM_RADIO_PID 0x937A
#define MJSG_HD_RADIO_PID 0x937C
+
+/*
+ * Xverve Signalyzer tools (http://www.signalyzer.com/)
+ */
+#define XVERVE_SIGNALYZER_ST_PID 0xBCA0
+#define XVERVE_SIGNALYZER_SLITE_PID 0xBCA1
+#define XVERVE_SIGNALYZER_SH2_PID 0xBCA2
+#define XVERVE_SIGNALYZER_SH4_PID 0xBCA4
+
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e280ad8e12f..5cd30e4345c 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -206,6 +206,7 @@ static void option_instat_callback(struct urb *urb);
#define AMOI_PRODUCT_H01 0x0800
#define AMOI_PRODUCT_H01A 0x7002
#define AMOI_PRODUCT_H02 0x0802
+#define AMOI_PRODUCT_SKYPEPHONE_S2 0x0407
#define DELL_VENDOR_ID 0x413C
@@ -302,6 +303,7 @@ static void option_instat_callback(struct urb *urb);
#define QISDA_PRODUCT_H21_4512 0x4512
#define QISDA_PRODUCT_H21_4523 0x4523
#define QISDA_PRODUCT_H20_4515 0x4515
+#define QISDA_PRODUCT_H20_4518 0x4518
#define QISDA_PRODUCT_H20_4519 0x4519
/* TLAYTECH PRODUCTS */
@@ -516,6 +518,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) },
+ { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) },
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
@@ -852,6 +855,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 93d72eb8caf..cde67cacb2c 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -51,6 +51,8 @@ static const struct usb_device_id id_table[] = {
{USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */
{USB_DEVICE(0x413c, 0x8185)}, /* Dell Gobi 2000 QDL device (N0218, VU936) */
{USB_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
+ {USB_DEVICE(0x05c6, 0x9208)}, /* Generic Gobi 2000 QDL device */
+ {USB_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
{USB_DEVICE(0x05c6, 0x9224)}, /* Sony Gobi 2000 QDL device (N0279, VU730) */
{USB_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
{USB_DEVICE(0x05c6, 0x9244)}, /* Samsung Gobi 2000 QDL device (VL176) */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ef0bdb08d78..d47b56e9e8c 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -245,6 +245,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
+ { USB_DEVICE(0x1199, 0x0301) }, /* Sierra Wireless USB Dongle 250U */
/* Sierra Wireless C597 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
/* Sierra Wireless T598 */
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 44716427c51..64ec073e89d 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -139,9 +139,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
/* fill the common fields in the URB */
us->current_urb->context = &urb_done;
- us->current_urb->actual_length = 0;
- us->current_urb->error_count = 0;
- us->current_urb->status = 0;
+ us->current_urb->transfer_flags = 0;
/* we assume that if transfer_buffer isn't us->iobuf then it
* hasn't been mapped for DMA. Yes, this is clunky, but it's
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-22 01:25:05 +0000