diff options
Diffstat (limited to 'drivers/usb')
187 files changed, 7613 insertions, 5782 deletions
diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h index 5651231a743..f3eecd967a8 100644 --- a/drivers/usb/atm/usbatm.h +++ b/drivers/usb/atm/usbatm.h @@ -34,6 +34,7 @@ #include <linux/stringify.h> #include <linux/usb.h> #include <linux/mutex.h> +#include <linux/ratelimit.h> /* #define VERBOSE_DEBUG @@ -59,13 +60,12 @@ atm_printk(KERN_INFO, instance , format , ## arg) #define atm_warn(instance, format, arg...) \ atm_printk(KERN_WARNING, instance , format , ## arg) -#define atm_dbg(instance, format, arg...) \ - dynamic_pr_debug("ATM dev %d: " format , \ - (instance)->atm_dev->number , ## arg) -#define atm_rldbg(instance, format, arg...) \ - if (printk_ratelimit()) \ - atm_dbg(instance , format , ## arg) - +#define atm_dbg(instance, format, ...) \ + pr_debug("ATM dev %d: " format, \ + (instance)->atm_dev->number, ##__VA_ARGS__) +#define atm_rldbg(instance, format, ...) \ + pr_debug_ratelimited("ATM dev %d: " format, \ + (instance)->atm_dev->number, ##__VA_ARGS__) /* flags, set by mini-driver in bind() */ diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c index aa491627a45..892cc96466e 100644 --- a/drivers/usb/c67x00/c67x00-sched.c +++ b/drivers/usb/c67x00/c67x00-sched.c @@ -344,7 +344,7 @@ void c67x00_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) /* it could happen that we reinitialize this completion, while * somebody was waiting for that completion. The timeout and * while loop handle such cases, but this might be improved */ - INIT_COMPLETION(c67x00->endpoint_disable); + reinit_completion(&c67x00->endpoint_disable); c67x00_sched_kick(c67x00); wait_for_completion_timeout(&c67x00->endpoint_disable, 1 * HZ); diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 4a851e15e58..77b47d82c9a 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -1,6 +1,6 @@ config USB_CHIPIDEA tristate "ChipIdea Highspeed Dual Role Controller" - depends on (USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET) + depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. Currently, only the diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h index 464584c6cca..a8571316568 100644 --- a/drivers/usb/chipidea/bits.h +++ b/drivers/usb/chipidea/bits.h @@ -48,6 +48,7 @@ #define PORTSC_SUSP BIT(7) #define PORTSC_HSP BIT(9) #define PORTSC_PTC (0x0FUL << 16) +#define PORTSC_PHCD(d) ((d) ? BIT(22) : BIT(23)) /* PTS and PTW for non lpm version only */ #define PORTSC_PTS(d) \ (u32)((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0)) diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 74d998d9b45..bb5d976e5b8 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -108,23 +108,16 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) } data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0); - if (!IS_ERR(data->phy)) { - ret = usb_phy_init(data->phy); - if (ret) { - dev_err(&pdev->dev, "unable to init phy: %d\n", ret); - goto err_clk; - } - } else if (PTR_ERR(data->phy) == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; + if (IS_ERR(data->phy)) { + ret = PTR_ERR(data->phy); goto err_clk; } pdata.phy = data->phy; - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + goto err_clk; if (data->usbmisc_data) { ret = imx_usbmisc_init(data->usbmisc_data); @@ -175,10 +168,6 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); ci_hdrc_remove_device(data->ci_pdev); - - if (data->phy) - usb_phy_shutdown(data->phy); - clk_disable_unprepare(data->clk); return 0; diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c index 042320a6c6c..d514332ac08 100644 --- a/drivers/usb/chipidea/ci_hdrc_pci.c +++ b/drivers/usb/chipidea/ci_hdrc_pci.c @@ -129,7 +129,12 @@ static DEFINE_PCI_DEVICE_TABLE(ci_hdrc_pci_id_table) = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), .driver_data = (kernel_ulong_t)&penwell_pci_platdata, }, - { 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ } + { + /* Intel Clovertrail */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), + .driver_data = (kernel_ulong_t)&penwell_pci_platdata, + }, + { 0 } /* end: all zeroes */ }; MODULE_DEVICE_TABLE(pci, ci_hdrc_pci_id_table); diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 94626409559..5d8981c5235 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -172,6 +172,27 @@ u8 hw_port_test_get(struct ci_hdrc *ci) return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC); } +/* The PHY enters/leaves low power mode */ +static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable) +{ + enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC; + bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm))); + + if (enable && !lpm) { + hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), + PORTSC_PHCD(ci->hw_bank.lpm)); + } else if (!enable && lpm) { + hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), + 0); + /* + * The controller needs at least 1ms to reflect + * PHY's status, the PHY also needs some time (less + * than 1ms) to leave low power mode. + */ + usleep_range(1500, 2000); + } +} + static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) { u32 reg; @@ -199,6 +220,8 @@ static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) if (ci->hw_ep_max > ENDPT_MAX) return -ENODEV; + ci_hdrc_enter_lpm(ci, false); + /* Disable all interrupts bits */ hw_write(ci, OP_USBINTR, 0xffffffff, 0); @@ -369,16 +392,28 @@ static irqreturn_t ci_irq(int irq, void *data) static int ci_get_platdata(struct device *dev, struct ci_hdrc_platform_data *platdata) { - /* Get the vbus regulator */ - platdata->reg_vbus = devm_regulator_get(dev, "vbus"); - if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) { - return -EPROBE_DEFER; - } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) { - platdata->reg_vbus = NULL; /* no vbus regualator is needed */ - } else if (IS_ERR(platdata->reg_vbus)) { - dev_err(dev, "Getting regulator error: %ld\n", - PTR_ERR(platdata->reg_vbus)); - return PTR_ERR(platdata->reg_vbus); + if (!platdata->phy_mode) + platdata->phy_mode = of_usb_get_phy_mode(dev->of_node); + + if (!platdata->dr_mode) + platdata->dr_mode = of_usb_get_dr_mode(dev->of_node); + + if (platdata->dr_mode == USB_DR_MODE_UNKNOWN) + platdata->dr_mode = USB_DR_MODE_OTG; + + if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) { + /* Get the vbus regulator */ + platdata->reg_vbus = devm_regulator_get(dev, "vbus"); + if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) { + /* no vbus regualator is needed */ + platdata->reg_vbus = NULL; + } else if (IS_ERR(platdata->reg_vbus)) { + dev_err(dev, "Getting regulator error: %ld\n", + PTR_ERR(platdata->reg_vbus)); + return PTR_ERR(platdata->reg_vbus); + } } return 0; @@ -465,6 +500,33 @@ static void ci_get_otg_capable(struct ci_hdrc *ci) } } +static int ci_usb_phy_init(struct ci_hdrc *ci) +{ + if (ci->platdata->phy) { + ci->transceiver = ci->platdata->phy; + return usb_phy_init(ci->transceiver); + } else { + ci->global_phy = true; + ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR(ci->transceiver)) + ci->transceiver = NULL; + + return 0; + } +} + +static void ci_usb_phy_destroy(struct ci_hdrc *ci) +{ + if (!ci->transceiver) + return; + + otg_set_peripheral(ci->transceiver->otg, NULL); + if (ci->global_phy) + usb_put_phy(ci->transceiver); + else + usb_phy_shutdown(ci->transceiver); +} + static int ci_hdrc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -473,7 +535,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) void __iomem *base; int ret; enum usb_dr_mode dr_mode; - struct device_node *of_node = dev->of_node ?: dev->parent->of_node; if (!dev->platform_data) { dev_err(dev, "platform data missing\n"); @@ -493,10 +554,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) ci->dev = dev; ci->platdata = dev->platform_data; - if (ci->platdata->phy) - ci->transceiver = ci->platdata->phy; - else - ci->global_phy = true; ret = hw_device_init(ci, base); if (ret < 0) { @@ -504,27 +561,25 @@ static int ci_hdrc_probe(struct platform_device *pdev) return -ENODEV; } + ret = ci_usb_phy_init(ci); + if (ret) { + dev_err(dev, "unable to init phy: %d\n", ret); + return ret; + } + ci->hw_bank.phys = res->start; ci->irq = platform_get_irq(pdev, 0); if (ci->irq < 0) { dev_err(dev, "missing IRQ\n"); - return -ENODEV; + ret = -ENODEV; + goto destroy_phy; } ci_get_otg_capable(ci); - if (!ci->platdata->phy_mode) - ci->platdata->phy_mode = of_usb_get_phy_mode(of_node); - hw_phymode_configure(ci); - if (!ci->platdata->dr_mode) - ci->platdata->dr_mode = of_usb_get_dr_mode(of_node); - - if (ci->platdata->dr_mode == USB_DR_MODE_UNKNOWN) - ci->platdata->dr_mode = USB_DR_MODE_OTG; - dr_mode = ci->platdata->dr_mode; /* initialize role(s) before the interrupt is requested */ if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { @@ -537,11 +592,23 @@ static int ci_hdrc_probe(struct platform_device *pdev) ret = ci_hdrc_gadget_init(ci); if (ret) dev_info(dev, "doesn't support gadget\n"); + if (!ret && ci->transceiver) { + ret = otg_set_peripheral(ci->transceiver->otg, + &ci->gadget); + /* + * If we implement all USB functions using chipidea drivers, + * it doesn't need to call above API, meanwhile, if we only + * use gadget function, calling above API is useless. + */ + if (ret && ret != -ENOTSUPP) + goto destroy_phy; + } } if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) { dev_err(dev, "no supported roles\n"); - return -ENODEV; + ret = -ENODEV; + goto destroy_phy; } if (ci->is_otg) { @@ -594,6 +661,8 @@ static int ci_hdrc_probe(struct platform_device *pdev) free_irq(ci->irq, ci); stop: ci_role_destroy(ci); +destroy_phy: + ci_usb_phy_destroy(ci); return ret; } @@ -605,6 +674,9 @@ static int ci_hdrc_remove(struct platform_device *pdev) dbg_remove_files(ci); free_irq(ci->irq, ci); ci_role_destroy(ci); + ci_hdrc_enter_lpm(ci, true); + ci_usb_phy_destroy(ci); + kfree(ci->hw_bank.regmap); return 0; } diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 6f96795dd20..59e6020ea75 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -100,16 +100,18 @@ static void host_stop(struct ci_hdrc *ci) { struct usb_hcd *hcd = ci->hcd; - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - if (ci->platdata->reg_vbus) - regulator_disable(ci->platdata->reg_vbus); + if (hcd) { + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + if (ci->platdata->reg_vbus) + regulator_disable(ci->platdata->reg_vbus); + } } void ci_hdrc_host_destroy(struct ci_hdrc *ci) { - if (ci->role == CI_ROLE_HOST) + if (ci->role == CI_ROLE_HOST && ci->hcd) host_stop(ci); } diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 6b4c2f2eb94..b34c81969cb 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -20,7 +20,6 @@ #include <linux/pm_runtime.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -#include <linux/usb/otg.h> #include <linux/usb/chipidea.h> #include "ci.h" @@ -686,9 +685,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) usb_ep_fifo_flush(&ci->ep0out->ep); usb_ep_fifo_flush(&ci->ep0in->ep); - if (ci->driver) - ci->driver->disconnect(gadget); - /* make sure to disable all endpoints */ gadget_for_each_ep(ep, gadget) { usb_ep_disable(ep); @@ -718,6 +714,11 @@ __acquires(ci->lock) int retval; spin_unlock(&ci->lock); + if (ci->gadget.speed != USB_SPEED_UNKNOWN) { + if (ci->driver) + ci->driver->disconnect(&ci->gadget); + } + retval = _gadget_stop_activity(&ci->gadget); if (retval) goto done; @@ -1461,6 +1462,8 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active) hw_device_state(ci, ci->ep0out->qh.dma); dev_dbg(ci->dev, "Connected to host\n"); } else { + if (ci->driver) + ci->driver->disconnect(&ci->gadget); hw_device_state(ci, 0); if (ci->platdata->notify_event) ci->platdata->notify_event(ci, @@ -1600,6 +1603,8 @@ static void destroy_eps(struct ci_hdrc *ci) for (i = 0; i < ci->hw_ep_max; i++) { struct ci_hw_ep *hwep = &ci->ci_hw_ep[i]; + if (hwep->pending_td) + free_pending_td(hwep); dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma); } } @@ -1631,23 +1636,22 @@ static int ci_udc_start(struct usb_gadget *gadget, retval = usb_ep_enable(&ci->ep0in->ep); if (retval) return retval; - spin_lock_irqsave(&ci->lock, flags); ci->driver = driver; pm_runtime_get_sync(&ci->gadget.dev); if (ci->vbus_active) { + spin_lock_irqsave(&ci->lock, flags); hw_device_reset(ci, USBMODE_CM_DC); } else { pm_runtime_put_sync(&ci->gadget.dev); - goto done; + return retval; } retval = hw_device_state(ci, ci->ep0out->qh.dma); + spin_unlock_irqrestore(&ci->lock, flags); if (retval) pm_runtime_put_sync(&ci->gadget.dev); - done: - spin_unlock_irqrestore(&ci->lock, flags); return retval; } @@ -1667,13 +1671,13 @@ static int ci_udc_stop(struct usb_gadget *gadget, if (ci->platdata->notify_event) ci->platdata->notify_event(ci, CI_HDRC_CONTROLLER_STOPPED_EVENT); - ci->driver = NULL; spin_unlock_irqrestore(&ci->lock, flags); _gadget_stop_activity(&ci->gadget); spin_lock_irqsave(&ci->lock, flags); pm_runtime_put(&ci->gadget.dev); } + ci->driver = NULL; spin_unlock_irqrestore(&ci->lock, flags); return 0; @@ -1784,34 +1788,9 @@ static int udc_start(struct ci_hdrc *ci) ci->gadget.ep0 = &ci->ep0in->ep; - if (ci->global_phy) { - ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); - if (IS_ERR(ci->transceiver)) - ci->transceiver = NULL; - } - - if (ci->platdata->flags & CI_HDRC_REQUIRE_TRANSCEIVER) { - if (ci->transceiver == NULL) { - retval = -ENODEV; - goto destroy_eps; - } - } - - if (ci->transceiver) { - retval = otg_set_peripheral(ci->transceiver->otg, - &ci->gadget); - /* - * If we implement all USB functions using chipidea drivers, - * it doesn't need to call above API, meanwhile, if we only - * use gadget function, calling above API is useless. - */ - if (retval && retval != -ENOTSUPP) - goto put_transceiver; - } - retval = usb_add_gadget_udc(dev, &ci->gadget); if (retval) - goto remove_trans; + goto destroy_eps; pm_runtime_no_callbacks(&ci->gadget.dev); pm_runtime_enable(&ci->gadget.dev); @@ -1821,17 +1800,6 @@ static int udc_start(struct ci_hdrc *ci) return retval; -remove_trans: - if (ci->transceiver) { - otg_set_peripheral(ci->transceiver->otg, NULL); - if (ci->global_phy) - usb_put_phy(ci->transceiver); - } - - dev_err(dev, "error = %i\n", retval); -put_transceiver: - if (ci->transceiver && ci->global_phy) - usb_put_phy(ci->transceiver); destroy_eps: destroy_eps(ci); free_pools: diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index d3318a0df8e..4d387596f3f 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -101,6 +101,7 @@ struct wdm_device { struct work_struct rxwork; int werr; int rerr; + int resp_count; struct list_head device_list; int (*manage_power)(struct usb_interface *, int); @@ -253,6 +254,10 @@ static void wdm_int_callback(struct urb *urb) "NOTIFY_NETWORK_CONNECTION %s network", dr->wValue ? "connected to" : "disconnected from"); goto exit; + case USB_CDC_NOTIFY_SPEED_CHANGE: + dev_dbg(&desc->intf->dev, "SPEED_CHANGE received (len %u)", + urb->actual_length); + goto exit; default: clear_bit(WDM_POLL_RUNNING, &desc->flags); dev_err(&desc->intf->dev, @@ -262,9 +267,9 @@ static void wdm_int_callback(struct urb *urb) } spin_lock(&desc->iuspin); - clear_bit(WDM_READ, &desc->flags); responding = test_and_set_bit(WDM_RESPONDING, &desc->flags); - if (!responding && !test_bit(WDM_DISCONNECTING, &desc->flags) + if (!desc->resp_count++ && !responding + && !test_bit(WDM_DISCONNECTING, &desc->flags) && !test_bit(WDM_SUSPENDING, &desc->flags)) { rv = usb_submit_urb(desc->response, GFP_ATOMIC); dev_dbg(&desc->intf->dev, "%s: usb_submit_urb %d", @@ -521,10 +526,36 @@ retry: desc->length -= cntr; /* in case we had outstanding data */ - if (!desc->length) + if (!desc->length) { clear_bit(WDM_READ, &desc->flags); - spin_unlock_irq(&desc->iuspin); + if (--desc->resp_count) { + set_bit(WDM_RESPONDING, &desc->flags); + spin_unlock_irq(&desc->iuspin); + + rv = usb_submit_urb(desc->response, GFP_KERNEL); + if (rv) { + dev_err(&desc->intf->dev, + "%s: usb_submit_urb failed with result %d\n", + __func__, rv); + spin_lock_irq(&desc->iuspin); + clear_bit(WDM_RESPONDING, &desc->flags); + spin_unlock_irq(&desc->iuspin); + + if (rv == -ENOMEM) { + rv = schedule_work(&desc->rxwork); + if (rv) + dev_err(&desc->intf->dev, "Cannot schedule work\n"); + } else { + spin_lock_irq(&desc->iuspin); + desc->resp_count = 0; + spin_unlock_irq(&desc->iuspin); + } + } + } else + spin_unlock_irq(&desc->iuspin); + } else + spin_unlock_irq(&desc->iuspin); rv = cntr; @@ -635,6 +666,9 @@ static int wdm_release(struct inode *inode, struct file *file) if (!test_bit(WDM_DISCONNECTING, &desc->flags)) { dev_dbg(&desc->intf->dev, "wdm_release: cleanup"); kill_urbs(desc); + spin_lock_irq(&desc->iuspin); + desc->resp_count = 0; + spin_unlock_irq(&desc->iuspin); desc->manage_power(desc->intf, 0); } else { /* must avoid dev_printk here as desc->intf is invalid */ diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 737e3c19967..967152a63bd 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -742,6 +742,22 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, if ((index & ~USB_DIR_IN) == 0) return 0; ret = findintfep(ps->dev, index); + if (ret < 0) { + /* + * Some not fully compliant Win apps seem to get + * index wrong and have the endpoint number here + * rather than the endpoint address (with the + * correct direction). Win does let this through, + * so we'll not reject it here but leave it to + * the device to not break KVM. But we warn. + */ + ret = findintfep(ps->dev, index ^ 0x80); + if (ret >= 0) + dev_info(&ps->dev->dev, + "%s: process %i (%s) requesting ep %02x but needs %02x\n", + __func__, task_pid_nr(current), + current->comm, index, index ^ 0x80); + } if (ret >= 0) ret = checkintf(ps, ret); break; @@ -898,10 +914,8 @@ static int proc_control(struct dev_state *ps, void __user *arg) snoop(&dev->dev, "control urb: bRequestType=%02x " "bRequest=%02x wValue=%04x " "wIndex=%04x wLength=%04x\n", - ctrl.bRequestType, ctrl.bRequest, - __le16_to_cpup(&ctrl.wValue), - __le16_to_cpup(&ctrl.wIndex), - __le16_to_cpup(&ctrl.wLength)); + ctrl.bRequestType, ctrl.bRequest, ctrl.wValue, + ctrl.wIndex, ctrl.wLength); if (ctrl.bRequestType & 0x80) { if (ctrl.wLength && !access_ok(VERIFY_WRITE, ctrl.data, ctrl.wLength)) { @@ -1620,32 +1634,32 @@ static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg) static int proc_control_compat(struct dev_state *ps, struct usbdevfs_ctrltransfer32 __user *p32) { - struct usbdevfs_ctrltransfer __user *p; - __u32 udata; - p = compat_alloc_user_space(sizeof(*p)); - if (copy_in_user(p, p32, (sizeof(*p32) - sizeof(compat_caddr_t))) || - get_user(udata, &p32->data) || + struct usbdevfs_ctrltransfer __user *p; + __u32 udata; + p = compat_alloc_user_space(sizeof(*p)); + if (copy_in_user(p, p32, (sizeof(*p32) - sizeof(compat_caddr_t))) || + get_user(udata, &p32->data) || put_user(compat_ptr(udata), &p->data)) return -EFAULT; - return proc_control(ps, p); + return proc_control(ps, p); } static int proc_bulk_compat(struct dev_state *ps, struct usbdevfs_bulktransfer32 __user *p32) { - struct usbdevfs_bulktransfer __user *p; - compat_uint_t n; - compat_caddr_t addr; + struct usbdevfs_bulktransfer __user *p; + compat_uint_t n; + compat_caddr_t addr; - p = compat_alloc_user_space(sizeof(*p)); + p = compat_alloc_user_space(sizeof(*p)); - if (get_user(n, &p32->ep) || put_user(n, &p->ep) || - get_user(n, &p32->len) || put_user(n, &p->len) || - get_user(n, &p32->timeout) || put_user(n, &p->timeout) || - get_user(addr, &p32->data) || put_user(compat_ptr(addr), &p->data)) - return -EFAULT; + if (get_user(n, &p32->ep) || put_user(n, &p->ep) || + get_user(n, &p32->len) || put_user(n, &p->len) || + get_user(n, &p32->timeout) || put_user(n, &p->timeout) || + get_user(addr, &p32->data) || put_user(compat_ptr(addr), &p->data)) + return -EFAULT; - return proc_bulk(ps, p); + return proc_bulk(ps, p); } static int proc_disconnectsignal_compat(struct dev_state *ps, void __user *arg) { diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index f7841d44fed..47aade2a5e7 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1179,8 +1179,8 @@ static int usb_resume_interface(struct usb_device *udev, "reset_resume", status); } else { intf->needs_binding = 1; - dev_warn(&intf->dev, "no %s for driver %s?\n", - "reset_resume", driver->name); + dev_dbg(&intf->dev, "no reset_resume for driver %s?\n", + driver->name); } } else { status = driver->resume(intf); @@ -1790,6 +1790,9 @@ int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) struct usb_hcd *hcd = bus_to_hcd(udev->bus); int ret = -EPERM; + if (enable && !udev->usb2_hw_lpm_allowed) + return 0; + if (hcd->driver->set_usb2_hw_lpm) { ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable); if (!ret) diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index 7421888087a..ea337a718cc 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -8,7 +8,7 @@ * (C) Copyright Deti Fliegl 1999 (new USB architecture) * (C) Copyright Randy Dunlap 2000 * (C) Copyright David Brownell 2000-2001 (kernel hotplug, usb_device_id, - more docs, etc) + * more docs, etc) * (C) Copyright Yggdrasil Computing, Inc. 2000 * (usb_device_id matching changes by Adam J. Richter) * (C) Copyright Greg Kroah-Hartman 2002-2003 @@ -27,29 +27,21 @@ static const struct file_operations *usb_minors[MAX_USB_MINORS]; static DECLARE_RWSEM(minor_rwsem); -static int usb_open(struct inode * inode, struct file * file) +static int usb_open(struct inode *inode, struct file *file) { - int minor = iminor(inode); - const struct file_operations *c; int err = -ENODEV; - const struct file_operations *old_fops, *new_fops = NULL; + const struct file_operations *new_fops; down_read(&minor_rwsem); - c = usb_minors[minor]; + new_fops = fops_get(usb_minors[iminor(inode)]); - if (!c || !(new_fops = fops_get(c))) + if (!new_fops) goto done; - old_fops = file->f_op; - file->f_op = new_fops; + replace_fops(file, new_fops); /* Curiouser and curiouser... NULL ->open() as "no device" ? */ if (file->f_op->open) - err = file->f_op->open(inode,file); - if (err) { - fops_put(file->f_op); - file->f_op = fops_get(old_fops); - } - fops_put(old_fops); + err = file->f_op->open(inode, file); done: up_read(&minor_rwsem); return err; @@ -166,7 +158,7 @@ int usb_register_dev(struct usb_interface *intf, char *temp; #ifdef CONFIG_USB_DYNAMIC_MINORS - /* + /* * We don't care what the device tries to start at, we want to start * at zero to pack the devices into the smallest available space with * no holes in the minor range. diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index b9d3c43e385..dfe9d0f2297 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -215,6 +215,9 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) goto disable_pci; } + hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) && + driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0; + if (driver->flags & HCD_MEMORY) { /* EHCI, OHCI */ hcd->rsrc_start = pci_resource_start(dev, 0); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index d6a8d23f047..6bffb8c87bc 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -6,7 +6,7 @@ * (C) Copyright Deti Fliegl 1999 * (C) Copyright Randy Dunlap 2000 * (C) Copyright David Brownell 2000-2002 - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -40,6 +40,7 @@ #include <linux/platform_device.h> #include <linux/workqueue.h> #include <linux/pm_runtime.h> +#include <linux/types.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -92,10 +93,7 @@ EXPORT_SYMBOL_GPL (usb_bus_list); /* used when allocating bus numbers */ #define USB_MAXBUS 64 -struct usb_busmap { - unsigned long busmap [USB_MAXBUS / (8*sizeof (unsigned long))]; -}; -static struct usb_busmap busmap; +static DECLARE_BITMAP(busmap, USB_MAXBUS); /* used when updating list of hcds */ DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */ @@ -171,7 +169,7 @@ static const u8 usb25_rh_dev_descriptor[18] = { }; /* usb 2.0 root hub device descriptor */ -static const u8 usb2_rh_dev_descriptor [18] = { +static const u8 usb2_rh_dev_descriptor[18] = { 0x12, /* __u8 bLength; */ 0x01, /* __u8 bDescriptorType; Device */ 0x00, 0x02, /* __le16 bcdUSB; v2.0 */ @@ -194,7 +192,7 @@ static const u8 usb2_rh_dev_descriptor [18] = { /* no usb 2.0 root hub "device qualifier" descriptor: one speed only */ /* usb 1.1 root hub device descriptor */ -static const u8 usb11_rh_dev_descriptor [18] = { +static const u8 usb11_rh_dev_descriptor[18] = { 0x12, /* __u8 bLength; */ 0x01, /* __u8 bDescriptorType; Device */ 0x10, 0x01, /* __le16 bcdUSB; v1.1 */ @@ -219,7 +217,7 @@ static const u8 usb11_rh_dev_descriptor [18] = { /* Configuration descriptors for our root hubs */ -static const u8 fs_rh_config_descriptor [] = { +static const u8 fs_rh_config_descriptor[] = { /* one configuration */ 0x09, /* __u8 bLength; */ @@ -228,13 +226,13 @@ static const u8 fs_rh_config_descriptor [] = { 0x01, /* __u8 bNumInterfaces; (1) */ 0x01, /* __u8 bConfigurationValue; */ 0x00, /* __u8 iConfiguration; */ - 0xc0, /* __u8 bmAttributes; + 0xc0, /* __u8 bmAttributes; Bit 7: must be set, 6: Self-powered, 5: Remote wakeup, 4..0: resvd */ 0x00, /* __u8 MaxPower; */ - + /* USB 1.1: * USB 2.0, single TT organization (mandatory): * one interface, protocol 0 @@ -256,17 +254,17 @@ static const u8 fs_rh_config_descriptor [] = { 0x00, /* __u8 if_bInterfaceSubClass; */ 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */ 0x00, /* __u8 if_iInterface; */ - + /* one endpoint (status change endpoint) */ 0x07, /* __u8 ep_bLength; */ 0x05, /* __u8 ep_bDescriptorType; Endpoint */ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */ }; -static const u8 hs_rh_config_descriptor [] = { +static const u8 hs_rh_config_descriptor[] = { /* one configuration */ 0x09, /* __u8 bLength; */ @@ -275,13 +273,13 @@ static const u8 hs_rh_config_descriptor [] = { 0x01, /* __u8 bNumInterfaces; (1) */ 0x01, /* __u8 bConfigurationValue; */ 0x00, /* __u8 iConfiguration; */ - 0xc0, /* __u8 bmAttributes; + 0xc0, /* __u8 bmAttributes; Bit 7: must be set, 6: Self-powered, 5: Remote wakeup, 4..0: resvd */ 0x00, /* __u8 MaxPower; */ - + /* USB 1.1: * USB 2.0, single TT organization (mandatory): * one interface, protocol 0 @@ -303,12 +301,12 @@ static const u8 hs_rh_config_descriptor [] = { 0x00, /* __u8 if_bInterfaceSubClass; */ 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */ 0x00, /* __u8 if_iInterface; */ - + /* one endpoint (status change endpoint) */ 0x07, /* __u8 ep_bLength; */ 0x05, /* __u8 ep_bDescriptorType; Endpoint */ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) * see hub.c:hub_configure() for details. */ (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, @@ -428,7 +426,7 @@ rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len) char const *s; static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04}; - // language ids + /* language ids */ switch (id) { case 0: /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */ @@ -464,7 +462,7 @@ rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len) static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) { struct usb_ctrlrequest *cmd; - u16 typeReq, wValue, wIndex, wLength; + u16 typeReq, wValue, wIndex, wLength; u8 *ubuf = urb->transfer_buffer; unsigned len = 0; int status; @@ -526,10 +524,10 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) */ case DeviceRequest | USB_REQ_GET_STATUS: - tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev) + tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev) << USB_DEVICE_REMOTE_WAKEUP) | (1 << USB_DEVICE_SELF_POWERED); - tbuf [1] = 0; + tbuf[1] = 0; len = 2; break; case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: @@ -546,7 +544,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) goto error; break; case DeviceRequest | USB_REQ_GET_CONFIGURATION: - tbuf [0] = 1; + tbuf[0] = 1; len = 1; /* FALLTHROUGH */ case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: @@ -609,13 +607,13 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) } break; case DeviceRequest | USB_REQ_GET_INTERFACE: - tbuf [0] = 0; + tbuf[0] = 0; len = 1; /* FALLTHROUGH */ case DeviceOutRequest | USB_REQ_SET_INTERFACE: break; case DeviceOutRequest | USB_REQ_SET_ADDRESS: - // wValue == urb->dev->devaddr + /* wValue == urb->dev->devaddr */ dev_dbg (hcd->self.controller, "root hub device address %d\n", wValue); break; @@ -625,9 +623,9 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) /* ENDPOINT REQUESTS */ case EndpointRequest | USB_REQ_GET_STATUS: - // ENDPOINT_HALT flag - tbuf [0] = 0; - tbuf [1] = 0; + /* ENDPOINT_HALT flag */ + tbuf[0] = 0; + tbuf[1] = 0; len = 2; /* FALLTHROUGH */ case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: @@ -683,7 +681,7 @@ error: if (urb->transfer_buffer_length < len) len = urb->transfer_buffer_length; urb->actual_length = len; - // always USB_DIR_IN, toward host + /* always USB_DIR_IN, toward host */ memcpy (ubuf, bufp, len); /* report whether RH hardware supports remote wakeup */ @@ -877,11 +875,11 @@ static ssize_t authorized_default_store(struct device *dev, usb_hcd = bus_to_hcd(usb_bus); result = sscanf(buf, "%u\n", &val); if (result == 1) { - usb_hcd->authorized_default = val? 1 : 0; + usb_hcd->authorized_default = val ? 1 : 0; result = size; - } - else + } else { result = -EINVAL; + } return result; } static DEVICE_ATTR_RW(authorized_default); @@ -941,12 +939,12 @@ static int usb_register_bus(struct usb_bus *bus) int busnum; mutex_lock(&usb_bus_list_lock); - busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1); + busnum = find_next_zero_bit(busmap, USB_MAXBUS, 1); if (busnum >= USB_MAXBUS) { printk (KERN_ERR "%s: too many buses\n", usbcore_name); goto error_find_busnum; } - set_bit (busnum, busmap.busmap); + set_bit(busnum, busmap); bus->busnum = busnum; /* Add it to the local list of buses */ @@ -987,7 +985,7 @@ static void usb_deregister_bus (struct usb_bus *bus) usb_notify_remove_bus(bus); - clear_bit (bus->busnum, busmap.busmap); + clear_bit(bus->busnum, busmap); } /** @@ -1033,6 +1031,7 @@ static int register_root_hub(struct usb_hcd *hcd) dev_name(&usb_dev->dev), retval); return retval; } + usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev); } retval = usb_new_device (usb_dev); @@ -1120,21 +1119,21 @@ long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount) case USB_SPEED_LOW: /* INTR only */ if (is_input) { tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp); + return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp; } else { tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp); + return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp; } case USB_SPEED_FULL: /* ISOC or INTR */ if (isoc) { tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp); + return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp; } else { tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (9107L + BW_HOST_DELAY + tmp); + return 9107L + BW_HOST_DELAY + tmp; } case USB_SPEED_HIGH: /* ISOC or INTR */ - // FIXME adjust for input vs output + /* FIXME adjust for input vs output */ if (isoc) tmp = HS_NSECS_ISO (bytecount); else @@ -1651,6 +1650,7 @@ int usb_hcd_unlink_urb (struct urb *urb, int status) static void __usb_hcd_giveback_urb(struct urb *urb) { struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus); + struct usb_anchor *anchor = urb->anchor; int status = urb->unlinked; unsigned long flags; @@ -1662,6 +1662,7 @@ static void __usb_hcd_giveback_urb(struct urb *urb) unmap_urb_for_dma(hcd, urb); usbmon_urb_complete(&hcd->self, urb, status); + usb_anchor_suspend_wakeups(anchor); usb_unanchor_urb(urb); /* pass ownership to the completion handler */ @@ -1681,6 +1682,7 @@ static void __usb_hcd_giveback_urb(struct urb *urb) urb->complete(urb); local_irq_restore(flags); + usb_anchor_resume_wakeups(anchor); atomic_dec(&urb->use_count); if (unlikely(atomic_read(&urb->reject))) wake_up(&usb_kill_urb_queue); @@ -1703,7 +1705,9 @@ static void usb_giveback_urb_bh(unsigned long param) urb = list_entry(local_list.next, struct urb, urb_list); list_del_init(&urb->urb_list); + bh->completing_ep = urb->ep; __usb_hcd_giveback_urb(urb); + bh->completing_ep = NULL; } /* check if there are new URBs to giveback */ @@ -1812,7 +1816,7 @@ rescan: case USB_ENDPOINT_XFER_INT: s = "-intr"; break; default: - s = "-iso"; break; + s = "-iso"; break; }; s; })); @@ -2073,8 +2077,11 @@ EXPORT_SYMBOL_GPL(usb_alloc_streams); * * Reverts a group of bulk endpoints back to not using stream IDs. * Can fail if we are given bad arguments, or HCD is broken. + * + * Return: On success, the number of allocated streams. On failure, a negative + * error code. */ -void usb_free_streams(struct usb_interface *interface, +int usb_free_streams(struct usb_interface *interface, struct usb_host_endpoint **eps, unsigned int num_eps, gfp_t mem_flags) { @@ -2085,14 +2092,14 @@ void usb_free_streams(struct usb_interface *interface, dev = interface_to_usbdev(interface); hcd = bus_to_hcd(dev->bus); if (dev->speed != USB_SPEED_SUPER) - return; + return -EINVAL; /* Streams only apply to bulk endpoints. */ for (i = 0; i < num_eps; i++) if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc)) - return; + return -EINVAL; - hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags); + return hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags); } EXPORT_SYMBOL_GPL(usb_free_streams); @@ -2245,7 +2252,7 @@ static void hcd_resume_work(struct work_struct *work) } /** - * usb_hcd_resume_root_hub - called by HCD to resume its root hub + * usb_hcd_resume_root_hub - called by HCD to resume its root hub * @hcd: host controller for this root hub * * The USB host controller calls this function when its root hub is @@ -2324,15 +2331,8 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum); irqreturn_t usb_hcd_irq (int irq, void *__hcd) { struct usb_hcd *hcd = __hcd; - unsigned long flags; irqreturn_t rc; - /* IRQF_DISABLED doesn't work correctly with shared IRQs - * when the first handler doesn't use it. So let's just - * assume it's never used. - */ - local_irq_save(flags); - if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) rc = IRQ_NONE; else if (hcd->driver->irq(hcd) == IRQ_NONE) @@ -2340,7 +2340,6 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) else rc = IRQ_HANDLED; - local_irq_restore(flags); return rc; } EXPORT_SYMBOL_GPL(usb_hcd_irq); @@ -2547,13 +2546,6 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd, if (hcd->driver->irq) { - /* IRQF_DISABLED doesn't work as advertised when used together - * with IRQF_SHARED. As usb_hcd_irq() will always disable - * interrupts we can remove it here. - */ - if (irqflags & IRQF_SHARED) - irqflags &= ~IRQF_DISABLED; - snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); retval = request_irq(irqnum, &usb_hcd_irq, irqflags, @@ -2600,7 +2592,7 @@ int usb_add_hcd(struct usb_hcd *hcd, /* Keep old behaviour if authorized_default is not in [0, 1]. */ if (authorized_default < 0 || authorized_default > 1) - hcd->authorized_default = hcd->wireless? 0 : 1; + hcd->authorized_default = hcd->wireless ? 0 : 1; else hcd->authorized_default = authorized_default; set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -2743,7 +2735,7 @@ err_allocate_root_hub: err_register_bus: hcd_buffer_destroy(hcd); return retval; -} +} EXPORT_SYMBOL_GPL(usb_add_hcd); /** @@ -2818,7 +2810,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) EXPORT_SYMBOL_GPL(usb_remove_hcd); void -usb_hcd_platform_shutdown(struct platform_device* dev) +usb_hcd_platform_shutdown(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); @@ -2840,7 +2832,7 @@ struct usb_mon_operations *mon_ops; * Notice that the code is minimally error-proof. Because usbmon needs * symbols from usbcore, usbcore gets referenced and cannot be unloaded first. */ - + int usb_mon_register (struct usb_mon_operations *ops) { diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index dde4c83516a..06cec635e70 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -120,7 +120,7 @@ static inline char *portspeed(struct usb_hub *hub, int portstatus) if (hub_is_superspeed(hub->hdev)) return "5.0 Gb/s"; if (portstatus & USB_PORT_STAT_HIGH_SPEED) - return "480 Mb/s"; + return "480 Mb/s"; else if (portstatus & USB_PORT_STAT_LOW_SPEED) return "1.5 Mb/s"; else @@ -135,7 +135,7 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev) return usb_get_intfdata(hdev->actconfig->interface[0]); } -static int usb_device_supports_lpm(struct usb_device *udev) +int usb_device_supports_lpm(struct usb_device *udev) { /* USB 2.1 (and greater) devices indicate LPM support through * their USB 2.0 Extended Capabilities BOS descriptor. @@ -156,6 +156,11 @@ static int usb_device_supports_lpm(struct usb_device *udev) "Power management will be impacted.\n"); return 0; } + + /* udev is root hub */ + if (!udev->parent) + return 1; + if (udev->parent->lpm_capable) return 1; @@ -310,9 +315,9 @@ static void usb_set_lpm_parameters(struct usb_device *udev) return; udev_u1_del = udev->bos->ss_cap->bU1devExitLat; - udev_u2_del = udev->bos->ss_cap->bU2DevExitLat; + udev_u2_del = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat); hub_u1_del = udev->parent->bos->ss_cap->bU1devExitLat; - hub_u2_del = udev->parent->bos->ss_cap->bU2DevExitLat; + hub_u2_del = le16_to_cpu(udev->parent->bos->ss_cap->bU2DevExitLat); usb_set_lpm_mel(udev, &udev->u1_params, udev_u1_del, hub, &udev->parent->u1_params, hub_u1_del); @@ -433,7 +438,7 @@ static void set_port_led( case HUB_LED_OFF: s = "off"; break; case HUB_LED_AUTO: s = "auto"; break; default: s = "??"; break; - }; s; }), + } s; }), status); } @@ -857,7 +862,7 @@ static int hub_hub_status(struct usb_hub *hub, "%s failed (err = %d)\n", __func__, ret); } else { *status = le16_to_cpu(hub->status->hub.wHubStatus); - *change = le16_to_cpu(hub->status->hub.wHubChange); + *change = le16_to_cpu(hub->status->hub.wHubChange); ret = 0; } mutex_unlock(&hub->status_mutex); @@ -956,7 +961,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) */ set_bit(port1, hub->change_bits); - kick_khubd(hub); + kick_khubd(hub); } /** @@ -1107,16 +1112,13 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* * USB3 protocol ports will automatically transition * to Enabled state when detect an USB3.0 device attach. - * Do not disable USB3 protocol ports. + * Do not disable USB3 protocol ports, just pretend + * power was lost */ - if (!hub_is_superspeed(hdev)) { + portstatus &= ~USB_PORT_STAT_ENABLE; + if (!hub_is_superspeed(hdev)) usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); - portstatus &= ~USB_PORT_STAT_ENABLE; - } else { - /* Pretend that power was lost for USB3 devs */ - portstatus &= ~USB_PORT_STAT_ENABLE; - } } /* Clear status-change flags; we'll debounce later */ @@ -1130,6 +1132,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_ENABLE); } + if (portchange & USB_PORT_STAT_C_RESET) { + need_debounce_delay = true; + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_RESET); + } if ((portchange & USB_PORT_STAT_C_BH_RESET) && hub_is_superspeed(hub->hdev)) { need_debounce_delay = true; @@ -1361,7 +1368,7 @@ static int hub_configure(struct usb_hub *hub, if ((wHubCharacteristics & HUB_CHAR_COMPOUND) && !(hub_is_superspeed(hdev))) { int i; - char portstr [USB_MAXCHILDREN + 1]; + char portstr[USB_MAXCHILDREN + 1]; for (i = 0; i < hdev->maxchild; i++) portstr[i] = hub->descriptor->u.hs.DeviceRemovable @@ -1429,32 +1436,32 @@ static int hub_configure(struct usb_hub *hub, /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */ switch (wHubCharacteristics & HUB_CHAR_TTTT) { - case HUB_TTTT_8_BITS: - if (hdev->descriptor.bDeviceProtocol != 0) { - hub->tt.think_time = 666; - dev_dbg(hub_dev, "TT requires at most %d " - "FS bit times (%d ns)\n", - 8, hub->tt.think_time); - } - break; - case HUB_TTTT_16_BITS: - hub->tt.think_time = 666 * 2; + case HUB_TTTT_8_BITS: + if (hdev->descriptor.bDeviceProtocol != 0) { + hub->tt.think_time = 666; dev_dbg(hub_dev, "TT requires at most %d " "FS bit times (%d ns)\n", - 16, hub->tt.think_time); - break; - case HUB_TTTT_24_BITS: - hub->tt.think_time = 666 * 3; - dev_dbg(hub_dev, "TT requires at most %d " - "FS bit times (%d ns)\n", - 24, hub->tt.think_time); - break; - case HUB_TTTT_32_BITS: - hub->tt.think_time = 666 * 4; - dev_dbg(hub_dev, "TT requires at most %d " - "FS bit times (%d ns)\n", - 32, hub->tt.think_time); - break; + 8, hub->tt.think_time); + } + break; + case HUB_TTTT_16_BITS: + hub->tt.think_time = 666 * 2; + dev_dbg(hub_dev, "TT requires at most %d " + "FS bit times (%d ns)\n", + 16, hub->tt.think_time); + break; + case HUB_TTTT_24_BITS: + hub->tt.think_time = 666 * 3; + dev_dbg(hub_dev, "TT requires at most %d " + "FS bit times (%d ns)\n", + 24, hub->tt.think_time); + break; + case HUB_TTTT_32_BITS: + hub->tt.think_time = 666 * 4; + dev_dbg(hub_dev, "TT requires at most %d " + "FS bit times (%d ns)\n", + 32, hub->tt.think_time); + break; } /* probe() zeroes hub->indicator[] */ @@ -1560,7 +1567,7 @@ static int hub_configure(struct usb_hub *hub, /* maybe cycle the hub leds */ if (hub->has_indicators && blinkenlights) - hub->indicator [0] = INDICATOR_CYCLE; + hub->indicator[0] = INDICATOR_CYCLE; for (i = 0; i < hdev->maxchild; i++) { ret = usb_hub_create_port_device(hub, i + 1); @@ -1978,7 +1985,7 @@ static void choose_devnum(struct usb_device *udev) if (devnum >= 128) devnum = find_next_zero_bit(bus->devmap.devicemap, 128, 1); - bus->devnum_next = ( devnum >= 127 ? 1 : devnum + 1); + bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1); } if (devnum < 128) { set_bit(devnum, bus->devmap.devicemap); @@ -2018,8 +2025,8 @@ static void hub_free_dev(struct usb_device *udev) * Something got disconnected. Get rid of it and all of its children. * * If *pdev is a normal device then the parent hub must already be locked. - * If *pdev is a root hub then this routine will acquire the - * usb_bus_list_lock on behalf of the caller. + * If *pdev is a root hub then the caller must hold the usb_bus_list_lock, + * which protects the set of root hubs as well as the list of buses. * * Only hub drivers (including virtual root hub drivers for host * controllers) should ever call this. @@ -2232,8 +2239,7 @@ static int usb_enumerate_device(struct usb_device *udev) udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL); udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL); udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL); - } - else { + } else { /* read the standard strings and cache them if present */ udev->product = usb_cache_string(udev, udev->descriptor.iProduct); udev->manufacturer = usb_cache_string(udev, @@ -2489,7 +2495,7 @@ error_device_descriptor: usb_autosuspend_device(usb_dev); error_autoresume: out_authorized: - usb_unlock_device(usb_dev); // complements locktree + usb_unlock_device(usb_dev); /* complements locktree */ return result; } @@ -3108,8 +3114,8 @@ static int finish_port_resume(struct usb_device *udev) retry_reset_resume: status = usb_reset_and_verify_device(udev); - /* 10.5.4.5 says be sure devices in the tree are still there. - * For now let's assume the device didn't go crazy on resume, + /* 10.5.4.5 says be sure devices in the tree are still there. + * For now let's assume the device didn't go crazy on resume, * and device drivers will know about any resume quirks. */ if (status == 0) { @@ -3211,7 +3217,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) if (status == 0 && !port_is_suspended(hub, portstatus)) goto SuspendCleared; - // dev_dbg(hub->intfdev, "resume port %d\n", port1); + /* dev_dbg(hub->intfdev, "resume port %d\n", port1); */ set_bit(port1, hub->busy_bits); @@ -3426,6 +3432,9 @@ static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state) unsigned long long u2_pel; int ret; + if (udev->state != USB_STATE_CONFIGURED) + return 0; + /* Convert SEL and PEL stored in ns to us */ u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000); u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000); @@ -3852,7 +3861,7 @@ EXPORT_SYMBOL_GPL(usb_enable_ltm); * Between connect detection and reset signaling there must be a delay * of 100ms at least for debounce and power-settling. The corresponding * timer shall restart whenever the downstream port detects a disconnect. - * + * * Apparently there are some bluetooth and irda-dongles and a number of * low-speed devices for which this debounce period may last over a second. * Not covered by the spec - but easy to deal with. @@ -3946,6 +3955,32 @@ static int hub_set_address(struct usb_device *udev, int devnum) return retval; } +/* + * There are reports of USB 3.0 devices that say they support USB 2.0 Link PM + * when they're plugged into a USB 2.0 port, but they don't work when LPM is + * enabled. + * + * Only enable USB 2.0 Link PM if the port is internal (hardwired), or the + * device says it supports the new USB 2.0 Link PM errata by setting the BESL + * support bit in the BOS descriptor. + */ +static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev) +{ + int connect_type; + + if (!udev->usb2_hw_lpm_capable) + return; + + connect_type = usb_get_hub_port_connect_type(udev->parent, + udev->portnum); + + if ((udev->bos->ext_cap->bmAttributes & USB_BESL_SUPPORT) || + connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { + udev->usb2_hw_lpm_allowed = 1; + usb_set_usb2_hardware_lpm(udev, 1); + } +} + /* Reset device, (re)assign address, get device descriptor. * Device connection must be stable, no more debouncing needed. * Returns device in USB_STATE_ADDRESS, except on error. @@ -4052,7 +4087,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, udev->tt = &hub->tt; udev->ttport = port1; } - + /* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way? * Because device hardware and firmware is sometimes buggy in * this area, and this is how Linux has done it for ages. @@ -4127,11 +4162,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, #undef GET_DESCRIPTOR_BUFSIZE } - /* - * If device is WUSB, we already assigned an - * unauthorized address in the Connect Ack sequence; - * authorization will assign the final address. - */ + /* + * If device is WUSB, we already assigned an + * unauthorized address in the Connect Ack sequence; + * authorization will assign the final address. + */ if (udev->wusb == 0) { for (j = 0; j < SET_ADDRESS_TRIES; ++j) { retval = hub_set_address(udev, devnum); @@ -4160,7 +4195,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, msleep(10); if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3)) break; - } + } retval = usb_get_device_descriptor(udev, 8); if (retval < 8) { @@ -4216,7 +4251,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i); usb_ep0_reinit(udev); } - + retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE); if (retval < (signed)sizeof(udev->descriptor)) { if (retval != -ENODEV) @@ -4239,6 +4274,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, /* notify HCD that we have a device connected and addressed */ if (hcd->driver->update_device) hcd->driver->update_device(hcd, udev); + hub_set_initial_usb2_lpm_policy(udev); fail: if (retval) { hub_port_disable(hub, port1, 0); @@ -4313,7 +4349,7 @@ hub_power_remaining (struct usb_hub *hub) } if (remaining < 0) { dev_warn(hub->intfdev, "%dmA over power budget!\n", - - remaining); + -remaining); remaining = 0; } return remaining; @@ -4424,7 +4460,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); if (portstatus & USB_PORT_STAT_ENABLE) - goto done; + goto done; return; } if (hub_is_superspeed(hub->hdev)) @@ -4447,7 +4483,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } usb_set_device_state(udev, USB_STATE_POWERED); - udev->bus_mA = hub->mA_per_port; + udev->bus_mA = hub->mA_per_port; udev->level = hdev->level + 1; udev->wusb = hub_is_wusb(hub); @@ -4501,7 +4537,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, goto loop_disable; } } - + /* check for devices running slower than they could */ if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200 && udev->speed == USB_SPEED_FULL @@ -4561,7 +4597,7 @@ loop: dev_err(hub_dev, "unable to enumerate USB device on port %d\n", port1); } - + done: hub_port_disable(hub, port1, 1); if (hcd->driver->relinquish_port && !hub->hdev->parent) @@ -4726,7 +4762,7 @@ static void hub_events(void) * EM interference sometimes causes badly * shielded USB devices to be shutdown by * the hub, this hack enables them again. - * Works at least with mouse driver. + * Works at least with mouse driver. */ if (!(portstatus & USB_PORT_STAT_ENABLE) && !connect_change @@ -4838,7 +4874,7 @@ static void hub_events(void) dev_dbg(hub_dev, "over-current change\n"); clear_hub_feature(hdev, C_HUB_OVER_CURRENT); msleep(500); /* Cool down */ - hub_power_on(hub, true); + hub_power_on(hub, true); hub_hub_status(hub, &status, &unused); if (status & HUB_STATUS_OVERCURRENT) dev_err(hub_dev, "over-current " @@ -4858,7 +4894,7 @@ static void hub_events(void) usb_unlock_device(hdev); kref_put(&hub->kref, hub_release); - } /* end while (1) */ + } /* end while (1) */ } static int hub_thread(void *__unused) @@ -4883,7 +4919,7 @@ static int hub_thread(void *__unused) static const struct usb_device_id hub_id_table[] = { { .match_flags = USB_DEVICE_ID_MATCH_VENDOR - | USB_DEVICE_ID_MATCH_INT_CLASS, + | USB_DEVICE_ID_MATCH_INT_CLASS, .idVendor = USB_VENDOR_GENESYS_LOGIC, .bInterfaceClass = USB_CLASS_HUB, .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND}, @@ -5083,6 +5119,12 @@ static int usb_reset_and_verify_device(struct usb_device *udev) } parent_hub = usb_hub_to_struct_hub(parent_hdev); + /* Disable USB2 hardware LPM. + * It will be re-enabled by the enumeration process. + */ + if (udev->usb2_hw_lpm_enabled == 1) + usb_set_usb2_hardware_lpm(udev, 0); + bos = udev->bos; udev->bos = NULL; @@ -5117,13 +5159,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev) if (ret < 0) goto re_enumerate; - + /* Device might have changed firmware (DFU or similar) */ if (descriptors_changed(udev, &descriptor, bos)) { dev_info(&udev->dev, "device firmware changed\n"); udev->descriptor = descriptor; /* for disconnect() calls */ goto re_enumerate; - } + } /* Restore the device's previous configuration */ if (!udev->actconfig) @@ -5148,7 +5190,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) udev->actconfig->desc.bConfigurationValue, ret); mutex_unlock(hcd->bandwidth_mutex); goto re_enumerate; - } + } mutex_unlock(hcd->bandwidth_mutex); usb_set_device_state(udev, USB_STATE_CONFIGURED); @@ -5190,12 +5232,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev) done: /* Now that the alt settings are re-installed, enable LTM and LPM. */ + usb_set_usb2_hardware_lpm(udev, 1); usb_unlocked_enable_lpm(udev); usb_enable_ltm(udev); usb_release_bos_descriptor(udev); udev->bos = bos; return 0; - + re_enumerate: /* LPM state doesn't matter when we're about to destroy the device. */ hub_port_logical_disconnect(parent_hub, port1); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 82927e1ed27..bb315970e47 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1182,8 +1182,12 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) put_device(&dev->actconfig->interface[i]->dev); dev->actconfig->interface[i] = NULL; } + + if (dev->usb2_hw_lpm_enabled == 1) + usb_set_usb2_hardware_lpm(dev, 0); usb_unlocked_disable_lpm(dev); usb_disable_ltm(dev); + dev->actconfig = NULL; if (dev->state == USB_STATE_CONFIGURED) usb_set_device_state(dev, USB_STATE_ADDRESS); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 5b44cd47da5..12924dbfdc2 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -13,6 +13,7 @@ #include <linux/usb.h> #include <linux/usb/quirks.h> +#include <linux/usb/hcd.h> #include "usb.h" /* Lists of quirky USB devices, split in device quirks and interface quirks. @@ -97,6 +98,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Alcor Micro Corp. Hub */ { USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME }, + /* MicroTouch Systems touchscreen */ + { USB_DEVICE(0x0596, 0x051e), .driver_info = USB_QUIRK_RESET_RESUME }, + /* appletouch */ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -130,6 +134,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Broadcom BCM92035DGROM BT dongle */ { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME }, + /* MAYA44USB sound device */ + { USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, @@ -155,6 +162,21 @@ static const struct usb_device_id usb_interface_quirk_list[] = { { } /* terminating entry must be last */ }; +static const struct usb_device_id usb_amd_resume_quirk_list[] = { + /* Lenovo Mouse with Pixart controller */ + { USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Pixart Mouse */ + { USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME }, + + /* Logitech Optical Mouse M90/M100 */ + { USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME }, + + { } /* terminating entry must be last */ +}; + static bool usb_match_any_interface(struct usb_device *udev, const struct usb_device_id *id) { @@ -181,6 +203,18 @@ static bool usb_match_any_interface(struct usb_device *udev, return false; } +static int usb_amd_resume_quirk(struct usb_device *udev) +{ + struct usb_hcd *hcd; + + hcd = bus_to_hcd(udev->bus); + /* The device should be attached directly to root hub */ + if (udev->level == 1 && hcd->amd_resume_bug == 1) + return 1; + + return 0; +} + static u32 __usb_detect_quirks(struct usb_device *udev, const struct usb_device_id *id) { @@ -206,6 +240,15 @@ static u32 __usb_detect_quirks(struct usb_device *udev, void usb_detect_quirks(struct usb_device *udev) { udev->quirks = __usb_detect_quirks(udev, usb_quirk_list); + + /* + * Pixart-based mice would trigger remote wakeup issue on AMD + * Yangtze chipset, so set them as RESET_RESUME flag. + */ + if (usb_amd_resume_quirk(udev)) + udev->quirks |= __usb_detect_quirks(udev, + usb_amd_resume_quirk_list); + if (udev->quirks) dev_dbg(&udev->dev, "USB quirks for this device: %x\n", udev->quirks); diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 6d2c8edb1ff..52a97adf02a 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -23,14 +23,16 @@ static ssize_t field##_show(struct device *dev, \ { \ struct usb_device *udev; \ struct usb_host_config *actconfig; \ + ssize_t rc = 0; \ \ udev = to_usb_device(dev); \ + usb_lock_device(udev); \ actconfig = udev->actconfig; \ if (actconfig) \ - return sprintf(buf, format_string, \ + rc = sprintf(buf, format_string, \ actconfig->desc.field); \ - else \ - return 0; \ + usb_unlock_device(udev); \ + return rc; \ } \ #define usb_actconfig_attr(field, format_string) \ @@ -45,12 +47,15 @@ static ssize_t bMaxPower_show(struct device *dev, { struct usb_device *udev; struct usb_host_config *actconfig; + ssize_t rc = 0; udev = to_usb_device(dev); + usb_lock_device(udev); actconfig = udev->actconfig; - if (!actconfig) - return 0; - return sprintf(buf, "%dmA\n", usb_get_max_power(udev, actconfig)); + if (actconfig) + rc = sprintf(buf, "%dmA\n", usb_get_max_power(udev, actconfig)); + usb_unlock_device(udev); + return rc; } static DEVICE_ATTR_RO(bMaxPower); @@ -59,12 +64,15 @@ static ssize_t configuration_show(struct device *dev, { struct usb_device *udev; struct usb_host_config *actconfig; + ssize_t rc = 0; udev = to_usb_device(dev); + usb_lock_device(udev); actconfig = udev->actconfig; - if ((!actconfig) || (!actconfig->string)) - return 0; - return sprintf(buf, "%s\n", actconfig->string); + if (actconfig && actconfig->string) + rc = sprintf(buf, "%s\n", actconfig->string); + usb_unlock_device(udev); + return rc; } static DEVICE_ATTR_RO(configuration); @@ -390,7 +398,8 @@ static DEVICE_ATTR_RW(autosuspend); static const char on_string[] = "on"; static const char auto_string[] = "auto"; -static void warn_level(void) { +static void warn_level(void) +{ static int level_warned; if (!level_warned) { @@ -449,7 +458,7 @@ static ssize_t usb2_hardware_lpm_show(struct device *dev, struct usb_device *udev = to_usb_device(dev); const char *p; - if (udev->usb2_hw_lpm_enabled == 1) + if (udev->usb2_hw_lpm_allowed == 1) p = "enabled"; else p = "disabled"; @@ -469,8 +478,10 @@ static ssize_t usb2_hardware_lpm_store(struct device *dev, ret = strtobool(buf, &value); - if (!ret) + if (!ret) { + udev->usb2_hw_lpm_allowed = value; ret = usb_set_usb2_hardware_lpm(udev, value); + } usb_unlock_device(udev); @@ -644,7 +655,7 @@ static ssize_t authorized_store(struct device *dev, result = usb_deauthorize_device(usb_dev); else result = usb_authorize_device(usb_dev); - return result < 0? result : size; + return result < 0 ? result : size; } static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, S_IRUGO | S_IWUSR, authorized_show, authorized_store); @@ -764,6 +775,7 @@ read_descriptors(struct file *filp, struct kobject *kobj, * Following that are the raw descriptor entries for all the * configurations (config plus subsidiary descriptors). */ + usb_lock_device(udev); for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations && nleft > 0; ++cfgno) { if (cfgno < 0) { @@ -784,6 +796,7 @@ read_descriptors(struct file *filp, struct kobject *kobj, off -= srclen; } } + usb_unlock_device(udev); return count - nleft; } @@ -870,9 +883,7 @@ static ssize_t interface_show(struct device *dev, struct device_attribute *attr, char *string; intf = to_usb_interface(dev); - string = intf->cur_altsetting->string; - barrier(); /* The altsetting might change! */ - + string = ACCESS_ONCE(intf->cur_altsetting->string); if (!string) return 0; return sprintf(buf, "%s\n", string); @@ -888,7 +899,7 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, intf = to_usb_interface(dev); udev = interface_to_usbdev(intf); - alt = intf->cur_altsetting; + alt = ACCESS_ONCE(intf->cur_altsetting); return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X" "ic%02Xisc%02Xip%02Xin%02X\n", @@ -909,23 +920,14 @@ static ssize_t supports_autosuspend_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct usb_interface *intf; - struct usb_device *udev; - int ret; + int s; - intf = to_usb_interface(dev); - udev = interface_to_usbdev(intf); - - usb_lock_device(udev); + device_lock(dev); /* Devices will be autosuspended even when an interface isn't claimed */ - if (!intf->dev.driver || - to_usb_driver(intf->dev.driver)->supports_autosuspend) - ret = sprintf(buf, "%u\n", 1); - else - ret = sprintf(buf, "%u\n", 0); - usb_unlock_device(udev); + s = (!dev->driver || to_usb_driver(dev->driver)->supports_autosuspend); + device_unlock(dev); - return ret; + return sprintf(buf, "%u\n", s); } static DEVICE_ATTR_RO(supports_autosuspend); diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index c12bc790a6a..e62208356c8 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -138,13 +138,19 @@ void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor) } EXPORT_SYMBOL_GPL(usb_anchor_urb); +static int usb_anchor_check_wakeup(struct usb_anchor *anchor) +{ + return atomic_read(&anchor->suspend_wakeups) == 0 && + list_empty(&anchor->urb_list); +} + /* Callers must hold anchor->lock */ static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor) { urb->anchor = NULL; list_del(&urb->anchor_list); usb_put_urb(urb); - if (list_empty(&anchor->urb_list)) + if (usb_anchor_check_wakeup(anchor)) wake_up(&anchor->wait); } @@ -846,6 +852,39 @@ void usb_unlink_anchored_urbs(struct usb_anchor *anchor) EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs); /** + * usb_anchor_suspend_wakeups + * @anchor: the anchor you want to suspend wakeups on + * + * Call this to stop the last urb being unanchored from waking up any + * usb_wait_anchor_empty_timeout waiters. This is used in the hcd urb give- + * back path to delay waking up until after the completion handler has run. + */ +void usb_anchor_suspend_wakeups(struct usb_anchor *anchor) +{ + if (anchor) + atomic_inc(&anchor->suspend_wakeups); +} +EXPORT_SYMBOL_GPL(usb_anchor_suspend_wakeups); + +/** + * usb_anchor_resume_wakeups + * @anchor: the anchor you want to resume wakeups on + * + * Allow usb_wait_anchor_empty_timeout waiters to be woken up again, and + * wake up any current waiters if the anchor is empty. + */ +void usb_anchor_resume_wakeups(struct usb_anchor *anchor) +{ + if (!anchor) + return; + + atomic_dec(&anchor->suspend_wakeups); + if (usb_anchor_check_wakeup(anchor)) + wake_up(&anchor->wait); +} +EXPORT_SYMBOL_GPL(usb_anchor_resume_wakeups); + +/** * usb_wait_anchor_empty_timeout - wait for an anchor to be unused * @anchor: the anchor you want to become unused * @timeout: how long you are willing to wait in milliseconds @@ -858,7 +897,8 @@ EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs); int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor, unsigned int timeout) { - return wait_event_timeout(anchor->wait, list_empty(&anchor->urb_list), + return wait_event_timeout(anchor->wait, + usb_anchor_check_wakeup(anchor), msecs_to_jiffies(timeout)); } EXPORT_SYMBOL_GPL(usb_wait_anchor_empty_timeout); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 0a6ee2e70b2..4d1144990d4 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -497,7 +497,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, dev->authorized = 1; else { dev->authorized = usb_hcd->authorized_default; - dev->wusb = usb_bus_is_wusb(bus)? 1 : 0; + dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0; } return dev; } diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 823857767a1..c49383669cd 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -35,6 +35,7 @@ extern int usb_get_device_descriptor(struct usb_device *dev, unsigned int size); extern int usb_get_bos_descriptor(struct usb_device *dev); extern void usb_release_bos_descriptor(struct usb_device *dev); +extern int usb_device_supports_lpm(struct usb_device *udev); extern char *usb_cache_string(struct usb_device *udev, int index); extern int usb_set_configuration(struct usb_device *dev, int configuration); extern int usb_choose_configuration(struct usb_device *udev); diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index f969ea266ac..70fc43027a5 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -1,7 +1,6 @@ config USB_DWC3 tristate "DesignWare USB3 DRD Core Support" - depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA - depends on EXTCON + depends on (USB || USB_GADGET) && HAS_DMA select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD help Say Y or M here if your system has a Dual Role SuperSpeed diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 474162e9d01..74f9cf02da0 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -584,7 +584,7 @@ static int dwc3_remove(struct platform_device *pdev) usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); - pm_runtime_put(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); dwc3_debugfs_exit(dwc); @@ -691,7 +691,6 @@ static int dwc3_resume(struct device *dev) usb_phy_init(dwc->usb3_phy); usb_phy_init(dwc->usb2_phy); - msleep(100); spin_lock_irqsave(&dwc->lock, flags); diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 2f2e88a3a11..8b20c70d91e 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -119,10 +119,9 @@ static int dwc3_exynos_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we move to full device tree support this will vanish off. */ - if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - if (!dev->coherent_dma_mask) - dev->coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) + goto err1; platform_set_drvdata(pdev, exynos); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 9b138129e85..31443aeedcd 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -28,6 +28,8 @@ /* FIXME define these in <linux/pci_ids.h> */ #define PCI_VENDOR_ID_SYNOPSYS 0x16c3 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd +#define PCI_DEVICE_ID_INTEL_BYT 0x0f37 +#define PCI_DEVICE_ID_INTEL_MRFLD 0x119e struct dwc3_pci { struct device *dev; @@ -163,7 +165,6 @@ static int dwc3_pci_probe(struct pci_dev *pci, return 0; err3: - pci_set_drvdata(pci, NULL); platform_device_put(dwc3); err1: pci_disable_device(pci); @@ -178,7 +179,6 @@ static void dwc3_pci_remove(struct pci_dev *pci) platform_device_unregister(glue->dwc3); platform_device_unregister(glue->usb2_phy); platform_device_unregister(glue->usb3_phy); - pci_set_drvdata(pci, NULL); pci_disable_device(pci); } @@ -187,6 +187,8 @@ static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = { PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), }, { } /* Terminating Entry */ }; MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 7fa93f4bc50..95f7649c71a 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -352,7 +352,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, break; default: return -EINVAL; - }; + } response_pkt = (__le16 *) dwc->setup_buf; *response_pkt = cpu_to_le16(usb_status); @@ -470,7 +470,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, default: return -EINVAL; - }; + } return 0; } @@ -709,7 +709,7 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) dev_vdbg(dwc->dev, "Forwarding to gadget driver\n"); ret = dwc3_ep0_delegate_req(dwc, ctrl); break; - }; + } return ret; } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index f168eaebdef..5452c0fce36 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2611,15 +2611,13 @@ int dwc3_gadget_init(struct dwc3 *dwc) ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget); if (ret) { dev_err(dwc->dev, "failed to register udc\n"); - goto err5; + goto err4; } return 0; -err5: - dwc3_gadget_free_endpoints(dwc); - err4: + dwc3_gadget_free_endpoints(dwc); dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE, dwc->ep0_bounce, dwc->ep0_bounce_addr); diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 5e29ddeb4d3..8cfc3191be5 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -568,10 +568,6 @@ try_again: dbgp_printk("Could not find attached debug device\n"); goto err; } - if (ret < 0) { - dbgp_printk("Attached device is not a debug device\n"); - goto err; - } dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint; dbgp_endpoint_in = dbgp_desc.bDebugInEndpoint; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 30e2dd8a1f2..a91e6422f93 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -58,6 +58,20 @@ config USB_GADGET_DEBUG trying to track down. Never enable these messages for a production build. +config USB_GADGET_VERBOSE + bool "Verbose debugging Messages (DEVELOPMENT)" + depends on USB_GADGET_DEBUG + help + Many controller and gadget drivers will print verbose debugging + messages if you use this option to ask for those messages. + + Avoid enabling these messages, even if you're actively + debugging such a driver. Many drivers will emit so many + messages that the driver timings are affected, which will + either create new failure modes or remove the one you're + trying to track down. Never enable these messages for a + production build. + config USB_GADGET_DEBUG_FILES boolean "Debugging information files (DEVELOPMENT)" depends on PROC_FS @@ -313,7 +327,7 @@ config USB_S3C_HSUDC config USB_MV_UDC tristate "Marvell USB2.0 Device Controller" - depends on GENERIC_HARDIRQS && HAS_DMA + depends on HAS_DMA help Marvell Socs (including PXA and MMP series) include a high speed USB2.0 OTG controller, which can be configured as high speed or @@ -425,7 +439,7 @@ config USB_GOKU config USB_EG20T tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" - depends on PCI && GENERIC_HARDIRQS + depends on PCI help This is a USB device driver for EG20T PCH. EG20T PCH is the platform controller hub that is used in Intel's @@ -525,6 +539,9 @@ config USB_F_SUBSET config USB_F_RNDIS tristate +config USB_F_MASS_STORAGE + tristate + choice tristate "USB Gadget Drivers" default USB_ETH @@ -662,6 +679,16 @@ config USB_CONFIGFS_PHONET help The Phonet protocol implementation for USB device. +config USB_CONFIGFS_MASS_STORAGE + boolean "Mass storage" + depends on USB_CONFIGFS + select USB_F_MASS_STORAGE + help + The Mass Storage Gadget acts as a USB Mass Storage disk drive. + As its storage repository it can use a regular file or a block + device (in much the same way as the "loop" device driver), + specified as a module parameter or sysfs option. + config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" select USB_LIBCOMPOSITE @@ -878,6 +905,7 @@ config USB_MASS_STORAGE tristate "Mass Storage Gadget" depends on BLOCK select USB_LIBCOMPOSITE + select USB_F_MASS_STORAGE help The Mass Storage Gadget acts as a USB Mass Storage disk drive. As its storage repository it can use a regular file or a block @@ -1001,6 +1029,7 @@ config USB_G_ACM_MS select USB_LIBCOMPOSITE select USB_U_SERIAL select USB_F_ACM + select USB_F_MASS_STORAGE help This driver provides two functions in one configuration: a mass storage, and a CDC ACM (serial port) link. @@ -1015,8 +1044,8 @@ config USB_G_MULTI select USB_LIBCOMPOSITE select USB_U_SERIAL select USB_U_ETHER - select USB_U_RNDIS select USB_F_ACM + select USB_F_MASS_STORAGE help The Multifunction Composite Gadget provides Ethernet (RNDIS and/or CDC Ethernet), mass storage and ACM serial link @@ -1035,6 +1064,8 @@ config USB_G_MULTI config USB_G_MULTI_RNDIS bool "RNDIS + CDC Serial + Storage configuration" depends on USB_G_MULTI + select USB_U_RNDIS + select USB_F_RNDIS default y help This option enables a configuration with RNDIS, CDC Serial and @@ -1048,6 +1079,7 @@ config USB_G_MULTI_CDC bool "CDC Ethernet + CDC Serial + Storage configuration" depends on USB_G_MULTI default n + select USB_F_ECM help This option enables a configuration with CDC Ethernet (ECM), CDC Serial and Mass Storage functions available in the Multifunction diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 386db9daf1d..f1af39603d4 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -1,7 +1,8 @@ # # USB peripheral controller drivers # -ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG +ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG +ccflags-$(CONFIG_USB_GADGET_VERBOSE) += -DVERBOSE_DEBUG obj-$(CONFIG_USB_GADGET) += udc-core.o obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o @@ -60,6 +61,8 @@ usb_f_ecm_subset-y := f_subset.o obj-$(CONFIG_USB_F_SUBSET) += usb_f_ecm_subset.o usb_f_rndis-y := f_rndis.o obj-$(CONFIG_USB_F_RNDIS) += usb_f_rndis.o +usb_f_mass_storage-y := f_mass_storage.o storage_common.o +obj-$(CONFIG_USB_F_MASS_STORAGE)+= usb_f_mass_storage.o # # USB gadget drivers diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c index 4b947bb50f6..7bfa134fe0e 100644 --- a/drivers/usb/gadget/acm_ms.c +++ b/drivers/usb/gadget/acm_ms.c @@ -31,16 +31,7 @@ #define ACM_MS_VENDOR_NUM 0x1d6b /* Linux Foundation */ #define ACM_MS_PRODUCT_NUM 0x0106 /* Composite Gadget: ACM + MS*/ -/*-------------------------------------------------------------------------*/ - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "f_mass_storage.c" +#include "f_mass_storage.h" /*-------------------------------------------------------------------------*/ USB_GADGET_COMPOSITE_OPTIONS(); @@ -104,18 +95,35 @@ static struct usb_gadget_strings *dev_strings[] = { /****************************** Configurations ******************************/ static struct fsg_module_parameters fsg_mod_data = { .stall = 1 }; -FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data); +#ifdef CONFIG_USB_GADGET_DEBUG_FILES -static struct fsg_common fsg_common; +static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS; + +#else + +/* + * Number of buffers we will use. + * 2 is usually enough for good buffering pipeline + */ +#define fsg_num_buffers CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS + +#endif /* CONFIG_USB_DEBUG */ + +FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data); /*-------------------------------------------------------------------------*/ static struct usb_function *f_acm; static struct usb_function_instance *f_acm_inst; + +static struct usb_function_instance *fi_msg; +static struct usb_function *f_msg; + /* * We _always_ have both ACM and mass storage functions. */ static int __init acm_ms_do_config(struct usb_configuration *c) { + struct fsg_opts *opts; int status; if (gadget_is_otg(c->cdev->gadget)) { @@ -123,31 +131,37 @@ static int __init acm_ms_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - f_acm_inst = usb_get_function_instance("acm"); - if (IS_ERR(f_acm_inst)) - return PTR_ERR(f_acm_inst); + opts = fsg_opts_from_func_inst(fi_msg); f_acm = usb_get_function(f_acm_inst); - if (IS_ERR(f_acm)) { - status = PTR_ERR(f_acm); - goto err_func; + if (IS_ERR(f_acm)) + return PTR_ERR(f_acm); + + f_msg = usb_get_function(fi_msg); + if (IS_ERR(f_msg)) { + status = PTR_ERR(f_msg); + goto put_acm; } status = usb_add_function(c, f_acm); if (status < 0) - goto err_conf; + goto put_msg; - status = fsg_bind_config(c->cdev, c, &fsg_common); - if (status < 0) - goto err_fsg; + status = fsg_common_run_thread(opts->common); + if (status) + goto remove_acm; + + status = usb_add_function(c, f_msg); + if (status) + goto remove_acm; return 0; -err_fsg: +remove_acm: usb_remove_function(c, f_acm); -err_conf: +put_msg: + usb_put_function(f_msg); +put_acm: usb_put_function(f_acm); -err_func: - usb_put_function_instance(f_acm_inst); return status; } @@ -163,45 +177,82 @@ static struct usb_configuration acm_ms_config_driver = { static int __init acm_ms_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; + struct fsg_opts *opts; + struct fsg_config config; int status; - void *retp; - /* set up mass storage function */ - retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data); - if (IS_ERR(retp)) { - status = PTR_ERR(retp); - return PTR_ERR(retp); + f_acm_inst = usb_get_function_instance("acm"); + if (IS_ERR(f_acm_inst)) + return PTR_ERR(f_acm_inst); + + fi_msg = usb_get_function_instance("mass_storage"); + if (IS_ERR(fi_msg)) { + status = PTR_ERR(fi_msg); + goto fail_get_msg; } + /* set up mass storage function */ + fsg_config_from_params(&config, &fsg_mod_data, fsg_num_buffers); + opts = fsg_opts_from_func_inst(fi_msg); + + opts->no_configfs = true; + status = fsg_common_set_num_buffers(opts->common, fsg_num_buffers); + if (status) + goto fail; + + status = fsg_common_set_nluns(opts->common, config.nluns); + if (status) + goto fail_set_nluns; + + status = fsg_common_set_cdev(opts->common, cdev, config.can_stall); + if (status) + goto fail_set_cdev; + + fsg_common_set_sysfs(opts->common, true); + status = fsg_common_create_luns(opts->common, &config); + if (status) + goto fail_set_cdev; + + fsg_common_set_inquiry_string(opts->common, config.vendor_name, + config.product_name); /* * Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. */ status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) - goto fail1; + goto fail_string_ids; device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id; device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register our configuration */ status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config); if (status < 0) - goto fail1; + goto fail_string_ids; usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n", DRIVER_DESC); - fsg_common_put(&fsg_common); return 0; /* error recovery */ -fail1: - fsg_common_put(&fsg_common); +fail_string_ids: + fsg_common_remove_luns(opts->common); +fail_set_cdev: + fsg_common_free_luns(opts->common); +fail_set_nluns: + fsg_common_free_buffers(opts->common); +fail: + usb_put_function_instance(fi_msg); +fail_get_msg: + usb_put_function_instance(f_acm_inst); return status; } static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) { + usb_put_function(f_msg); + usb_put_function_instance(fi_msg); usb_put_function(f_acm); usb_put_function_instance(f_acm_inst); return 0; diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index a9a4346c83a..54a1e2954ce 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -3078,8 +3078,6 @@ static void udc_pci_remove(struct pci_dev *pdev) if (dev->active) pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - udc_remove(dev); } diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c index 5a5acf22c69..e126b6b248e 100644 --- a/drivers/usb/gadget/cdc2.c +++ b/drivers/usb/gadget/cdc2.c @@ -113,12 +113,6 @@ static int __init cdc_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - fi_ecm = usb_get_function_instance("ecm"); - if (IS_ERR(fi_ecm)) { - status = PTR_ERR(fi_ecm); - goto err_func_ecm; - } - f_ecm = usb_get_function(fi_ecm); if (IS_ERR(f_ecm)) { status = PTR_ERR(f_ecm); @@ -129,35 +123,24 @@ static int __init cdc_do_config(struct usb_configuration *c) if (status) goto err_add_ecm; - fi_serial = usb_get_function_instance("acm"); - if (IS_ERR(fi_serial)) { - status = PTR_ERR(fi_serial); - goto err_get_acm; - } - f_acm = usb_get_function(fi_serial); if (IS_ERR(f_acm)) { status = PTR_ERR(f_acm); - goto err_func_acm; + goto err_get_acm; } status = usb_add_function(c, f_acm); if (status) goto err_add_acm; - return 0; err_add_acm: usb_put_function(f_acm); -err_func_acm: - usb_put_function_instance(fi_serial); err_get_acm: usb_remove_function(c, f_ecm); err_add_ecm: usb_put_function(f_ecm); err_get_ecm: - usb_put_function_instance(fi_ecm); -err_func_ecm: return status; } diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index d4f0f330575..3e7ae707f69 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -354,7 +354,7 @@ static u8 encode_bMaxPower(enum usb_device_speed speed, return DIV_ROUND_UP(val, 8); default: return DIV_ROUND_UP(val, 2); - }; + } } static int config_buf(struct usb_configuration *config, diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 8f0d6141e5e..25885112fa3 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -557,7 +557,7 @@ static struct config_group *function_make( fi = usb_get_function_instance(func_name); if (IS_ERR(fi)) - return ERR_PTR(PTR_ERR(fi)); + return ERR_CAST(fi); ret = config_item_set_name(&fi->group.cg_item, name); if (ret) { @@ -991,6 +991,14 @@ static struct configfs_subsystem gadget_subsys = { .su_mutex = __MUTEX_INITIALIZER(gadget_subsys.su_mutex), }; +void unregister_gadget_item(struct config_item *item) +{ + struct gadget_info *gi = to_gadget_info(item); + + unregister_gadget(gi); +} +EXPORT_SYMBOL(unregister_gadget_item); + static int __init gadget_cfs_init(void) { int ret; diff --git a/drivers/usb/gadget/configfs.h b/drivers/usb/gadget/configfs.h new file mode 100644 index 00000000000..a7b564a913d --- /dev/null +++ b/drivers/usb/gadget/configfs.h @@ -0,0 +1,6 @@ +#ifndef USB__GADGET__CONFIGFS__H +#define USB__GADGET__CONFIGFS__H + +void unregister_gadget_item(struct config_item *item); + +#endif /* USB__GADGET__CONFIGFS__H */ diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 06ecd08fd57..8f4dae31092 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -544,7 +544,7 @@ static int dummy_enable(struct usb_ep *_ep, default: val = "ctrl"; break; - }; val; }), + } val; }), max, ep->stream_en ? "enabled" : "disabled"); /* at this point real hardware should be NAKing transfers @@ -923,8 +923,9 @@ static int dummy_udc_stop(struct usb_gadget *g, struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g); struct dummy *dum = dum_hcd->dum; - dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n", - driver->driver.name); + if (driver) + dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n", + driver->driver.name); dum->driver = NULL; @@ -1000,8 +1001,8 @@ static int dummy_udc_remove(struct platform_device *pdev) { struct dummy *dum = platform_get_drvdata(pdev); - usb_del_gadget_udc(&dum->gadget); device_remove_file(&dum->gadget.dev, &dev_attr_function); + usb_del_gadget_udc(&dum->gadget); return 0; } @@ -2270,7 +2271,7 @@ static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb) default: s = "?"; break; - }; s; }), + } s; }), ep, ep ? (usb_pipein(urb->pipe) ? "in" : "out") : "", ({ char *s; \ switch (usb_pipetype(urb->pipe)) { \ @@ -2286,7 +2287,7 @@ static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb) default: \ s = "-iso"; \ break; \ - }; s; }), + } s; }), urb->actual_length, urb->transfer_buffer_length); } diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index edab45da374..8d9e6f7e8f1 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -995,7 +995,7 @@ static void ecm_unbind(struct usb_configuration *c, struct usb_function *f) usb_ep_free_request(ecm->notify, ecm->notify_req); } -struct usb_function *ecm_alloc(struct usb_function_instance *fi) +static struct usb_function *ecm_alloc(struct usb_function_instance *fi) { struct f_ecm *ecm; struct f_ecm_opts *opts; diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index d00392d879d..d61c11d765d 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -624,7 +624,7 @@ static void eem_unbind(struct usb_configuration *c, struct usb_function *f) usb_free_all_descriptors(f); } -struct usb_function *eem_alloc(struct usb_function_instance *fi) +static struct usb_function *eem_alloc(struct usb_function_instance *fi) { struct f_eem *eem; struct f_eem_opts *opts; diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 1a66c5baa0d..774e8b89cdb 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -373,7 +373,7 @@ static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len) if (req->buf == NULL) req->buf = (void *)0xDEADBABE; - INIT_COMPLETION(ffs->ep0req_completion); + reinit_completion(&ffs->ep0req_completion); ret = usb_ep_queue(ffs->gadget->ep0, req, GFP_ATOMIC); if (unlikely(ret < 0)) @@ -1034,37 +1034,19 @@ struct ffs_sb_fill_data { struct ffs_file_perms perms; umode_t root_mode; const char *dev_name; - union { - /* set by ffs_fs_mount(), read by ffs_sb_fill() */ - void *private_data; - /* set by ffs_sb_fill(), read by ffs_fs_mount */ - struct ffs_data *ffs_data; - }; + struct ffs_data *ffs_data; }; static int ffs_sb_fill(struct super_block *sb, void *_data, int silent) { struct ffs_sb_fill_data *data = _data; struct inode *inode; - struct ffs_data *ffs; + struct ffs_data *ffs = data->ffs_data; ENTER(); - /* Initialise data */ - ffs = ffs_data_new(); - if (unlikely(!ffs)) - goto Enomem; - ffs->sb = sb; - ffs->dev_name = kstrdup(data->dev_name, GFP_KERNEL); - if (unlikely(!ffs->dev_name)) - goto Enomem; - ffs->file_perms = data->perms; - ffs->private_data = data->private_data; - - /* used by the caller of this function */ - data->ffs_data = ffs; - + data->ffs_data = NULL; sb->s_fs_info = ffs; sb->s_blocksize = PAGE_CACHE_SIZE; sb->s_blocksize_bits = PAGE_CACHE_SHIFT; @@ -1080,17 +1062,14 @@ static int ffs_sb_fill(struct super_block *sb, void *_data, int silent) &data->perms); sb->s_root = d_make_root(inode); if (unlikely(!sb->s_root)) - goto Enomem; + return -ENOMEM; /* EP0 file */ if (unlikely(!ffs_sb_create_file(sb, "ep0", ffs, &ffs_ep0_operations, NULL))) - goto Enomem; + return -ENOMEM; return 0; - -Enomem: - return -ENOMEM; } static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts) @@ -1193,6 +1172,7 @@ ffs_fs_mount(struct file_system_type *t, int flags, struct dentry *rv; int ret; void *ffs_dev; + struct ffs_data *ffs; ENTER(); @@ -1200,18 +1180,30 @@ ffs_fs_mount(struct file_system_type *t, int flags, if (unlikely(ret < 0)) return ERR_PTR(ret); + ffs = ffs_data_new(); + if (unlikely(!ffs)) + return ERR_PTR(-ENOMEM); + ffs->file_perms = data.perms; + + ffs->dev_name = kstrdup(dev_name, GFP_KERNEL); + if (unlikely(!ffs->dev_name)) { + ffs_data_put(ffs); + return ERR_PTR(-ENOMEM); + } + ffs_dev = functionfs_acquire_dev_callback(dev_name); - if (IS_ERR(ffs_dev)) - return ffs_dev; + if (IS_ERR(ffs_dev)) { + ffs_data_put(ffs); + return ERR_CAST(ffs_dev); + } + ffs->private_data = ffs_dev; + data.ffs_data = ffs; - data.dev_name = dev_name; - data.private_data = ffs_dev; rv = mount_nodev(t, flags, &data, ffs_sb_fill); - - /* data.ffs_data is set by ffs_sb_fill */ - if (IS_ERR(rv)) + if (IS_ERR(rv) && data.ffs_data) { functionfs_release_dev_callback(data.ffs_data); - + ffs_data_put(data.ffs_data); + } return rv; } @@ -2264,6 +2256,8 @@ static int ffs_func_bind(struct usb_configuration *c, data->raw_descs + ret, (sizeof data->raw_descs) - ret, __ffs_func_bind_do_descs, func); + if (unlikely(ret < 0)) + goto error; } /* diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 313b835eedf..a03ba2c8358 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -213,12 +213,14 @@ #include <linux/spinlock.h> #include <linux/string.h> #include <linux/freezer.h> +#include <linux/module.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb/composite.h> #include "gadget_chips.h" +#include "configfs.h" /*------------------------------------------------------------------------*/ @@ -228,26 +230,30 @@ static const char fsg_string_interface[] = "Mass Storage"; -#include "storage_common.c" +#include "storage_common.h" +#include "f_mass_storage.h" +/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ +static struct usb_string fsg_strings[] = { + {FSG_STRING_INTERFACE, fsg_string_interface}, + {} +}; + +static struct usb_gadget_strings fsg_stringtab = { + .language = 0x0409, /* en-us */ + .strings = fsg_strings, +}; + +static struct usb_gadget_strings *fsg_strings_array[] = { + &fsg_stringtab, + NULL, +}; /*-------------------------------------------------------------------------*/ struct fsg_dev; struct fsg_common; -/* FSF callback functions */ -struct fsg_operations { - /* - * Callback function to call when thread exits. If no - * callback is set or it returns value lower then zero MSF - * will force eject all LUNs it operates on (including those - * marked as non-removable or with prevent_medium_removal flag - * set). - */ - int (*thread_exits)(struct fsg_common *common); -}; - /* Data shared by all the FSG instances. */ struct fsg_common { struct usb_gadget *gadget; @@ -268,13 +274,14 @@ struct fsg_common { struct fsg_buffhd *next_buffhd_to_fill; struct fsg_buffhd *next_buffhd_to_drain; struct fsg_buffhd *buffhds; + unsigned int fsg_num_buffers; int cmnd_size; u8 cmnd[MAX_COMMAND_SIZE]; unsigned int nluns; unsigned int lun; - struct fsg_lun *luns; + struct fsg_lun **luns; struct fsg_lun *curlun; unsigned int bulk_out_maxpacket; @@ -294,6 +301,7 @@ struct fsg_common { unsigned int short_packet_received:1; unsigned int bad_lun_okay:1; unsigned int running:1; + unsigned int sysfs:1; int thread_wakeup_needed; struct completion thread_notifier; @@ -313,27 +321,6 @@ struct fsg_common { struct kref ref; }; -struct fsg_config { - unsigned nluns; - struct fsg_lun_config { - const char *filename; - char ro; - char removable; - char cdrom; - char nofua; - } luns[FSG_MAX_LUNS]; - - /* Callback functions. */ - const struct fsg_operations *ops; - /* Gadget's private data. */ - void *private_data; - - const char *vendor_name; /* 8 characters or less */ - const char *product_name; /* 16 characters or less */ - - char can_stall; -}; - struct fsg_dev { struct usb_function function; struct usb_gadget *gadget; /* Copy of cdev->gadget */ @@ -2172,7 +2159,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) common->data_dir = DATA_DIR_NONE; common->lun = cbw->Lun; if (common->lun < common->nluns) - common->curlun = &common->luns[common->lun]; + common->curlun = common->luns[common->lun]; else common->curlun = NULL; common->tag = cbw->Tag; @@ -2244,7 +2231,7 @@ reset: if (common->fsg) { fsg = common->fsg; - for (i = 0; i < fsg_num_buffers; ++i) { + for (i = 0; i < common->fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &common->buffhds[i]; if (bh->inreq) { @@ -2260,10 +2247,12 @@ reset: /* Disable the endpoints */ if (fsg->bulk_in_enabled) { usb_ep_disable(fsg->bulk_in); + fsg->bulk_in->driver_data = NULL; fsg->bulk_in_enabled = 0; } if (fsg->bulk_out_enabled) { usb_ep_disable(fsg->bulk_out); + fsg->bulk_out->driver_data = NULL; fsg->bulk_out_enabled = 0; } @@ -2301,7 +2290,7 @@ reset: clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); /* Allocate the requests */ - for (i = 0; i < fsg_num_buffers; ++i) { + for (i = 0; i < common->fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &common->buffhds[i]; rc = alloc_request(common, fsg->bulk_in, &bh->inreq); @@ -2318,7 +2307,9 @@ reset: common->running = 1; for (i = 0; i < common->nluns; ++i) - common->luns[i].unit_attention_data = SS_RESET_OCCURRED; + if (common->luns[i]) + common->luns[i]->unit_attention_data = + SS_RESET_OCCURRED; return rc; } @@ -2370,7 +2361,7 @@ static void handle_exception(struct fsg_common *common) /* Cancel all the pending transfers */ if (likely(common->fsg)) { - for (i = 0; i < fsg_num_buffers; ++i) { + for (i = 0; i < common->fsg_num_buffers; ++i) { bh = &common->buffhds[i]; if (bh->inreq_busy) usb_ep_dequeue(common->fsg->bulk_in, bh->inreq); @@ -2382,7 +2373,7 @@ static void handle_exception(struct fsg_common *common) /* Wait until everything is idle */ for (;;) { int num_active = 0; - for (i = 0; i < fsg_num_buffers; ++i) { + for (i = 0; i < common->fsg_num_buffers; ++i) { bh = &common->buffhds[i]; num_active += bh->inreq_busy + bh->outreq_busy; } @@ -2405,7 +2396,7 @@ static void handle_exception(struct fsg_common *common) */ spin_lock_irq(&common->lock); - for (i = 0; i < fsg_num_buffers; ++i) { + for (i = 0; i < common->fsg_num_buffers; ++i) { bh = &common->buffhds[i]; bh->state = BUF_STATE_EMPTY; } @@ -2418,7 +2409,9 @@ static void handle_exception(struct fsg_common *common) common->state = FSG_STATE_STATUS_PHASE; else { for (i = 0; i < common->nluns; ++i) { - curlun = &common->luns[i]; + curlun = common->luns[i]; + if (!curlun) + continue; curlun->prevent_medium_removal = 0; curlun->sense_data = SS_NO_SENSE; curlun->unit_attention_data = SS_NO_SENSE; @@ -2460,8 +2453,9 @@ static void handle_exception(struct fsg_common *common) * CONFIG_CHANGE cases. */ /* for (i = 0; i < common->nluns; ++i) */ - /* common->luns[i].unit_attention_data = */ - /* SS_RESET_OCCURRED; */ + /* if (common->luns[i]) */ + /* common->luns[i]->unit_attention_data = */ + /* SS_RESET_OCCURRED; */ break; case FSG_STATE_CONFIG_CHANGE: @@ -2557,12 +2551,13 @@ static int fsg_main_thread(void *common_) if (!common->ops || !common->ops->thread_exits || common->ops->thread_exits(common) < 0) { - struct fsg_lun *curlun = common->luns; + struct fsg_lun **curlun_it = common->luns; unsigned i = common->nluns; down_write(&common->filesem); - for (; i--; ++curlun) { - if (!fsg_lun_is_open(curlun)) + for (; i--; ++curlun_it) { + struct fsg_lun *curlun = *curlun_it; + if (!curlun || !fsg_lun_is_open(curlun)) continue; fsg_lun_close(curlun); @@ -2578,6 +2573,56 @@ static int fsg_main_thread(void *common_) /*************************** DEVICE ATTRIBUTES ***************************/ +static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + + return fsg_show_ro(curlun, buf); +} + +static ssize_t nofua_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + + return fsg_show_nofua(curlun, buf); +} + +static ssize_t file_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + struct rw_semaphore *filesem = dev_get_drvdata(dev); + + return fsg_show_file(curlun, filesem, buf); +} + +static ssize_t ro_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + struct rw_semaphore *filesem = dev_get_drvdata(dev); + + return fsg_store_ro(curlun, filesem, buf, count); +} + +static ssize_t nofua_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + + return fsg_store_nofua(curlun, buf, count); +} + +static ssize_t file_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + struct rw_semaphore *filesem = dev_get_drvdata(dev); + + return fsg_store_file(curlun, filesem, buf, count); +} + static DEVICE_ATTR_RW(ro); static DEVICE_ATTR_RW(nofua); static DEVICE_ATTR_RW(file); @@ -2595,221 +2640,422 @@ static void fsg_lun_release(struct device *dev) /* Nothing needs to be done */ } -static inline void fsg_common_get(struct fsg_common *common) +void fsg_common_get(struct fsg_common *common) { kref_get(&common->ref); } +EXPORT_SYMBOL_GPL(fsg_common_get); -static inline void fsg_common_put(struct fsg_common *common) +void fsg_common_put(struct fsg_common *common) { kref_put(&common->ref, fsg_common_release); } +EXPORT_SYMBOL_GPL(fsg_common_put); -static struct fsg_common *fsg_common_init(struct fsg_common *common, - struct usb_composite_dev *cdev, - struct fsg_config *cfg) +/* check if fsg_num_buffers is within a valid range */ +static inline int fsg_num_buffers_validate(unsigned int fsg_num_buffers) { - struct usb_gadget *gadget = cdev->gadget; - struct fsg_buffhd *bh; - struct fsg_lun *curlun; - struct fsg_lun_config *lcfg; - int nluns, i, rc; - char *pathbuf; - - rc = fsg_num_buffers_validate(); - if (rc != 0) - return ERR_PTR(rc); - - /* Find out how many LUNs there should be */ - nluns = cfg->nluns; - if (nluns < 1 || nluns > FSG_MAX_LUNS) { - dev_err(&gadget->dev, "invalid number of LUNs: %u\n", nluns); - return ERR_PTR(-EINVAL); - } + if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4) + return 0; + pr_err("fsg_num_buffers %u is out of range (%d to %d)\n", + fsg_num_buffers, 2, 4); + return -EINVAL; +} - /* Allocate? */ +static struct fsg_common *fsg_common_setup(struct fsg_common *common) +{ if (!common) { - common = kzalloc(sizeof *common, GFP_KERNEL); + common = kzalloc(sizeof(*common), GFP_KERNEL); if (!common) return ERR_PTR(-ENOMEM); common->free_storage_on_release = 1; } else { - memset(common, 0, sizeof *common); common->free_storage_on_release = 0; } + init_rwsem(&common->filesem); + spin_lock_init(&common->lock); + kref_init(&common->ref); + init_completion(&common->thread_notifier); + init_waitqueue_head(&common->fsg_wait); + common->state = FSG_STATE_TERMINATED; - common->buffhds = kcalloc(fsg_num_buffers, - sizeof *(common->buffhds), GFP_KERNEL); - if (!common->buffhds) { - if (common->free_storage_on_release) - kfree(common); - return ERR_PTR(-ENOMEM); + return common; +} + +void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs) +{ + common->sysfs = sysfs; +} +EXPORT_SYMBOL_GPL(fsg_common_set_sysfs); + +static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n) +{ + if (buffhds) { + struct fsg_buffhd *bh = buffhds; + while (n--) { + kfree(bh->buf); + ++bh; + } + kfree(buffhds); } +} - common->ops = cfg->ops; - common->private_data = cfg->private_data; +int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n) +{ + struct fsg_buffhd *bh, *buffhds; + int i, rc; - common->gadget = gadget; - common->ep0 = gadget->ep0; - common->ep0req = cdev->req; - common->cdev = cdev; + rc = fsg_num_buffers_validate(n); + if (rc != 0) + return rc; + + buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL); + if (!buffhds) + return -ENOMEM; - /* Maybe allocate device-global string IDs, and patch descriptors */ - if (fsg_strings[FSG_STRING_INTERFACE].id == 0) { - rc = usb_string_id(cdev); - if (unlikely(rc < 0)) + /* Data buffers cyclic list */ + bh = buffhds; + i = n; + goto buffhds_first_it; + do { + bh->next = bh + 1; + ++bh; +buffhds_first_it: + bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL); + if (unlikely(!bh->buf)) goto error_release; - fsg_strings[FSG_STRING_INTERFACE].id = rc; - fsg_intf_desc.iInterface = rc; - } + } while (--i); + bh->next = buffhds; + _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); + common->fsg_num_buffers = n; + common->buffhds = buffhds; + + return 0; + +error_release: /* - * Create the LUNs, open their backing files, and register the - * LUN devices in sysfs. + * "buf"s pointed to by heads after n - i are NULL + * so releasing them won't hurt */ - curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL); - if (unlikely(!curlun)) { - rc = -ENOMEM; - goto error_release; + _fsg_common_free_buffers(buffhds, n); + + return -ENOMEM; +} +EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers); + +static inline void fsg_common_remove_sysfs(struct fsg_lun *lun) +{ + device_remove_file(&lun->dev, &dev_attr_nofua); + /* + * device_remove_file() => + * + * here the attr (e.g. dev_attr_ro) is only used to be passed to: + * + * sysfs_remove_file() => + * + * here e.g. both dev_attr_ro_cdrom and dev_attr_ro are in + * the same namespace and + * from here only attr->name is passed to: + * + * sysfs_hash_and_remove() + * + * attr->name is the same for dev_attr_ro_cdrom and + * dev_attr_ro + * attr->name is the same for dev_attr_file and + * dev_attr_file_nonremovable + * + * so we don't differentiate between removing e.g. dev_attr_ro_cdrom + * and dev_attr_ro + */ + device_remove_file(&lun->dev, &dev_attr_ro); + device_remove_file(&lun->dev, &dev_attr_file); +} + +void fsg_common_remove_lun(struct fsg_lun *lun, bool sysfs) +{ + if (sysfs) { + fsg_common_remove_sysfs(lun); + device_unregister(&lun->dev); } - common->luns = curlun; + fsg_lun_close(lun); + kfree(lun); +} +EXPORT_SYMBOL_GPL(fsg_common_remove_lun); - init_rwsem(&common->filesem); +static void _fsg_common_remove_luns(struct fsg_common *common, int n) +{ + int i; - for (i = 0, lcfg = cfg->luns; i < nluns; ++i, ++curlun, ++lcfg) { - curlun->cdrom = !!lcfg->cdrom; - curlun->ro = lcfg->cdrom || lcfg->ro; - curlun->initially_ro = curlun->ro; - curlun->removable = lcfg->removable; - curlun->dev.release = fsg_lun_release; - curlun->dev.parent = &gadget->dev; - /* curlun->dev.driver = &fsg_driver.driver; XXX */ - dev_set_drvdata(&curlun->dev, &common->filesem); - dev_set_name(&curlun->dev, "lun%d", i); - - rc = device_register(&curlun->dev); - if (rc) { - INFO(common, "failed to register LUN%d: %d\n", i, rc); - common->nluns = i; - put_device(&curlun->dev); - goto error_release; + for (i = 0; i < n; ++i) + if (common->luns[i]) { + fsg_common_remove_lun(common->luns[i], common->sysfs); + common->luns[i] = NULL; } +} +EXPORT_SYMBOL_GPL(fsg_common_remove_luns); - rc = device_create_file(&curlun->dev, - curlun->cdrom - ? &dev_attr_ro_cdrom - : &dev_attr_ro); - if (rc) - goto error_luns; - rc = device_create_file(&curlun->dev, - curlun->removable - ? &dev_attr_file - : &dev_attr_file_nonremovable); - if (rc) - goto error_luns; - rc = device_create_file(&curlun->dev, &dev_attr_nofua); - if (rc) - goto error_luns; +void fsg_common_remove_luns(struct fsg_common *common) +{ + _fsg_common_remove_luns(common, common->nluns); +} - if (lcfg->filename) { - rc = fsg_lun_open(curlun, lcfg->filename); - if (rc) - goto error_luns; - } else if (!curlun->removable) { - ERROR(common, "no file given for LUN%d\n", i); - rc = -EINVAL; - goto error_luns; - } +void fsg_common_free_luns(struct fsg_common *common) +{ + fsg_common_remove_luns(common); + kfree(common->luns); + common->luns = NULL; +} +EXPORT_SYMBOL_GPL(fsg_common_free_luns); + +int fsg_common_set_nluns(struct fsg_common *common, int nluns) +{ + struct fsg_lun **curlun; + + /* Find out how many LUNs there should be */ + if (nluns < 1 || nluns > FSG_MAX_LUNS) { + pr_err("invalid number of LUNs: %u\n", nluns); + return -EINVAL; } + + curlun = kcalloc(nluns, sizeof(*curlun), GFP_KERNEL); + if (unlikely(!curlun)) + return -ENOMEM; + + if (common->luns) + fsg_common_free_luns(common); + + common->luns = curlun; common->nluns = nluns; - /* Data buffers cyclic list */ - bh = common->buffhds; - i = fsg_num_buffers; - goto buffhds_first_it; - do { - bh->next = bh + 1; - ++bh; -buffhds_first_it: - bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL); - if (unlikely(!bh->buf)) { - rc = -ENOMEM; - goto error_release; - } - } while (--i); - bh->next = common->buffhds; + pr_info("Number of LUNs=%d\n", common->nluns); - /* Prepare inquiryString */ - i = get_default_bcdDevice(); - snprintf(common->inquiry_string, sizeof common->inquiry_string, - "%-8s%-16s%04x", cfg->vendor_name ?: "Linux", - /* Assume product name dependent on the first LUN */ - cfg->product_name ?: (common->luns->cdrom - ? "File-CD Gadget" - : "File-Stor Gadget"), - i); + return 0; +} +EXPORT_SYMBOL_GPL(fsg_common_set_nluns); + +void fsg_common_set_ops(struct fsg_common *common, + const struct fsg_operations *ops) +{ + common->ops = ops; +} +EXPORT_SYMBOL_GPL(fsg_common_set_ops); + +void fsg_common_free_buffers(struct fsg_common *common) +{ + _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); + common->buffhds = NULL; +} +EXPORT_SYMBOL_GPL(fsg_common_free_buffers); + +int fsg_common_set_cdev(struct fsg_common *common, + struct usb_composite_dev *cdev, bool can_stall) +{ + struct usb_string *us; + + common->gadget = cdev->gadget; + common->ep0 = cdev->gadget->ep0; + common->ep0req = cdev->req; + common->cdev = cdev; + + us = usb_gstrings_attach(cdev, fsg_strings_array, + ARRAY_SIZE(fsg_strings)); + if (IS_ERR(us)) + return PTR_ERR(us); + + fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id; /* * Some peripheral controllers are known not to be able to * halt bulk endpoints correctly. If one of them is present, * disable stalls. */ - common->can_stall = cfg->can_stall && - !(gadget_is_at91(common->gadget)); + common->can_stall = can_stall && !(gadget_is_at91(common->gadget)); - spin_lock_init(&common->lock); - kref_init(&common->ref); + return 0; +} +EXPORT_SYMBOL_GPL(fsg_common_set_cdev); - /* Tell the thread to start working */ - common->thread_task = - kthread_create(fsg_main_thread, common, "file-storage"); - if (IS_ERR(common->thread_task)) { - rc = PTR_ERR(common->thread_task); - goto error_release; +static inline int fsg_common_add_sysfs(struct fsg_common *common, + struct fsg_lun *lun) +{ + int rc; + + rc = device_register(&lun->dev); + if (rc) { + put_device(&lun->dev); + return rc; } - init_completion(&common->thread_notifier); - init_waitqueue_head(&common->fsg_wait); - /* Information */ - INFO(common, FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n"); - INFO(common, "Number of LUNs=%d\n", common->nluns); + rc = device_create_file(&lun->dev, + lun->cdrom + ? &dev_attr_ro_cdrom + : &dev_attr_ro); + if (rc) + goto error; + rc = device_create_file(&lun->dev, + lun->removable + ? &dev_attr_file + : &dev_attr_file_nonremovable); + if (rc) + goto error; + rc = device_create_file(&lun->dev, &dev_attr_nofua); + if (rc) + goto error; + + return 0; + +error: + /* removing nonexistent files is a no-op */ + fsg_common_remove_sysfs(lun); + device_unregister(&lun->dev); + return rc; +} + +int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, + unsigned int id, const char *name, + const char **name_pfx) +{ + struct fsg_lun *lun; + char *pathbuf, *p; + int rc = -ENOMEM; + + if (!common->nluns || !common->luns) + return -ENODEV; + + if (common->luns[id]) + return -EBUSY; + + if (!cfg->filename && !cfg->removable) { + pr_err("no file given for LUN%d\n", id); + return -EINVAL; + } + + lun = kzalloc(sizeof(*lun), GFP_KERNEL); + if (!lun) + return -ENOMEM; + + lun->name_pfx = name_pfx; + + lun->cdrom = !!cfg->cdrom; + lun->ro = cfg->cdrom || cfg->ro; + lun->initially_ro = lun->ro; + lun->removable = !!cfg->removable; + + if (!common->sysfs) { + /* we DON'T own the name!*/ + lun->name = name; + } else { + lun->dev.release = fsg_lun_release; + lun->dev.parent = &common->gadget->dev; + dev_set_drvdata(&lun->dev, &common->filesem); + dev_set_name(&lun->dev, "%s", name); + lun->name = dev_name(&lun->dev); + + rc = fsg_common_add_sysfs(common, lun); + if (rc) { + pr_info("failed to register LUN%d: %d\n", id, rc); + goto error_sysfs; + } + } + + common->luns[id] = lun; + + if (cfg->filename) { + rc = fsg_lun_open(lun, cfg->filename); + if (rc) + goto error_lun; + } pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); - for (i = 0, nluns = common->nluns, curlun = common->luns; - i < nluns; - ++curlun, ++i) { - char *p = "(no medium)"; - if (fsg_lun_is_open(curlun)) { - p = "(error)"; - if (pathbuf) { - p = d_path(&curlun->filp->f_path, - pathbuf, PATH_MAX); - if (IS_ERR(p)) - p = "(error)"; - } + p = "(no medium)"; + if (fsg_lun_is_open(lun)) { + p = "(error)"; + if (pathbuf) { + p = d_path(&lun->filp->f_path, pathbuf, PATH_MAX); + if (IS_ERR(p)) + p = "(error)"; } - LINFO(curlun, "LUN: %s%s%sfile: %s\n", - curlun->removable ? "removable " : "", - curlun->ro ? "read only " : "", - curlun->cdrom ? "CD-ROM " : "", - p); } + pr_info("LUN: %s%s%sfile: %s\n", + lun->removable ? "removable " : "", + lun->ro ? "read only " : "", + lun->cdrom ? "CD-ROM " : "", + p); kfree(pathbuf); + return 0; + +error_lun: + if (common->sysfs) { + fsg_common_remove_sysfs(lun); + device_unregister(&lun->dev); + } + fsg_lun_close(lun); + common->luns[id] = NULL; +error_sysfs: + kfree(lun); + return rc; +} +EXPORT_SYMBOL_GPL(fsg_common_create_lun); + +int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg) +{ + char buf[8]; /* enough for 100000000 different numbers, decimal */ + int i, rc; + + for (i = 0; i < common->nluns; ++i) { + snprintf(buf, sizeof(buf), "lun%d", i); + rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL); + if (rc) + goto fail; + } + + pr_info("Number of LUNs=%d\n", common->nluns); + + return 0; + +fail: + _fsg_common_remove_luns(common, i); + return rc; +} +EXPORT_SYMBOL_GPL(fsg_common_create_luns); + +void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn, + const char *pn) +{ + int i; + + /* Prepare inquiryString */ + i = get_default_bcdDevice(); + snprintf(common->inquiry_string, sizeof(common->inquiry_string), + "%-8s%-16s%04x", vn ?: "Linux", + /* Assume product name dependent on the first LUN */ + pn ?: ((*common->luns)->cdrom + ? "File-CD Gadget" + : "File-Stor Gadget"), + i); +} +EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string); + +int fsg_common_run_thread(struct fsg_common *common) +{ + common->state = FSG_STATE_IDLE; + /* Tell the thread to start working */ + common->thread_task = + kthread_create(fsg_main_thread, common, "file-storage"); + if (IS_ERR(common->thread_task)) { + common->state = FSG_STATE_TERMINATED; + return PTR_ERR(common->thread_task); + } + DBG(common, "I/O thread pid: %d\n", task_pid_nr(common->thread_task)); wake_up_process(common->thread_task); - return common; - -error_luns: - common->nluns = i + 1; -error_release: - common->state = FSG_STATE_TERMINATED; /* The thread is dead */ - /* Call fsg_common_release() directly, ref might be not initialised. */ - fsg_common_release(&common->ref); - return ERR_PTR(rc); + return 0; } +EXPORT_SYMBOL_GPL(fsg_common_run_thread); static void fsg_common_release(struct kref *ref) { @@ -2822,36 +3068,26 @@ static void fsg_common_release(struct kref *ref) } if (likely(common->luns)) { - struct fsg_lun *lun = common->luns; + struct fsg_lun **lun_it = common->luns; unsigned i = common->nluns; /* In error recovery common->nluns may be zero. */ - for (; i; --i, ++lun) { - device_remove_file(&lun->dev, &dev_attr_nofua); - device_remove_file(&lun->dev, - lun->cdrom - ? &dev_attr_ro_cdrom - : &dev_attr_ro); - device_remove_file(&lun->dev, - lun->removable - ? &dev_attr_file - : &dev_attr_file_nonremovable); + for (; i; --i, ++lun_it) { + struct fsg_lun *lun = *lun_it; + if (!lun) + continue; + if (common->sysfs) + fsg_common_remove_sysfs(lun); fsg_lun_close(lun); - device_unregister(&lun->dev); + if (common->sysfs) + device_unregister(&lun->dev); + kfree(lun); } kfree(common->luns); } - { - struct fsg_buffhd *bh = common->buffhds; - unsigned i = fsg_num_buffers; - do { - kfree(bh->buf); - } while (++bh, --i); - } - - kfree(common->buffhds); + _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); if (common->free_storage_on_release) kfree(common); } @@ -2859,24 +3095,6 @@ static void fsg_common_release(struct kref *ref) /*-------------------------------------------------------------------------*/ -static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) -{ - struct fsg_dev *fsg = fsg_from_func(f); - struct fsg_common *common = fsg->common; - - DBG(fsg, "unbind\n"); - if (fsg->common->fsg == fsg) { - fsg->common->new_fsg = NULL; - raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); - /* FIXME: make interruptible or killable somehow? */ - wait_event(common->fsg_wait, common->fsg != fsg); - } - - fsg_common_put(common); - usb_free_all_descriptors(&fsg->function); - kfree(fsg); -} - static int fsg_bind(struct usb_configuration *c, struct usb_function *f) { struct fsg_dev *fsg = fsg_from_func(f); @@ -2885,6 +3103,19 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) struct usb_ep *ep; unsigned max_burst; int ret; + struct fsg_opts *opts; + + opts = fsg_opts_from_func_inst(f->fi); + if (!opts->no_configfs) { + ret = fsg_common_set_cdev(fsg->common, c->cdev, + fsg->common->can_stall); + if (ret) + return ret; + fsg_common_set_inquiry_string(fsg->common, 0, 0); + ret = fsg_common_run_thread(fsg->common); + if (ret) + return ret; + } fsg->gadget = gadget; @@ -2937,95 +3168,472 @@ autoconf_fail: return -ENOTSUPP; } -/****************************** ADD FUNCTION ******************************/ +/****************************** ALLOCATE FUNCTION *************************/ -static struct usb_gadget_strings *fsg_strings_array[] = { - &fsg_stringtab, +static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct fsg_dev *fsg = fsg_from_func(f); + struct fsg_common *common = fsg->common; + + DBG(fsg, "unbind\n"); + if (fsg->common->fsg == fsg) { + fsg->common->new_fsg = NULL; + raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + /* FIXME: make interruptible or killable somehow? */ + wait_event(common->fsg_wait, common->fsg != fsg); + } + + usb_free_all_descriptors(&fsg->function); +} + +static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item) +{ + return container_of(to_config_group(item), struct fsg_lun_opts, group); +} + +static inline struct fsg_opts *to_fsg_opts(struct config_item *item) +{ + return container_of(to_config_group(item), struct fsg_opts, + func_inst.group); +} + +CONFIGFS_ATTR_STRUCT(fsg_lun_opts); +CONFIGFS_ATTR_OPS(fsg_lun_opts); + +static void fsg_lun_attr_release(struct config_item *item) +{ + struct fsg_lun_opts *lun_opts; + + lun_opts = to_fsg_lun_opts(item); + kfree(lun_opts); +} + +static struct configfs_item_operations fsg_lun_item_ops = { + .release = fsg_lun_attr_release, + .show_attribute = fsg_lun_opts_attr_show, + .store_attribute = fsg_lun_opts_attr_store, +}; + +static ssize_t fsg_lun_opts_file_show(struct fsg_lun_opts *opts, char *page) +{ + struct fsg_opts *fsg_opts; + + fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); + + return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page); +} + +static ssize_t fsg_lun_opts_file_store(struct fsg_lun_opts *opts, + const char *page, size_t len) +{ + struct fsg_opts *fsg_opts; + + fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); + + return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len); +} + +static struct fsg_lun_opts_attribute fsg_lun_opts_file = + __CONFIGFS_ATTR(file, S_IRUGO | S_IWUSR, fsg_lun_opts_file_show, + fsg_lun_opts_file_store); + +static ssize_t fsg_lun_opts_ro_show(struct fsg_lun_opts *opts, char *page) +{ + return fsg_show_ro(opts->lun, page); +} + +static ssize_t fsg_lun_opts_ro_store(struct fsg_lun_opts *opts, + const char *page, size_t len) +{ + struct fsg_opts *fsg_opts; + + fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); + + return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len); +} + +static struct fsg_lun_opts_attribute fsg_lun_opts_ro = + __CONFIGFS_ATTR(ro, S_IRUGO | S_IWUSR, fsg_lun_opts_ro_show, + fsg_lun_opts_ro_store); + +static ssize_t fsg_lun_opts_removable_show(struct fsg_lun_opts *opts, + char *page) +{ + return fsg_show_removable(opts->lun, page); +} + +static ssize_t fsg_lun_opts_removable_store(struct fsg_lun_opts *opts, + const char *page, size_t len) +{ + return fsg_store_removable(opts->lun, page, len); +} + +static struct fsg_lun_opts_attribute fsg_lun_opts_removable = + __CONFIGFS_ATTR(removable, S_IRUGO | S_IWUSR, + fsg_lun_opts_removable_show, + fsg_lun_opts_removable_store); + +static ssize_t fsg_lun_opts_cdrom_show(struct fsg_lun_opts *opts, char *page) +{ + return fsg_show_cdrom(opts->lun, page); +} + +static ssize_t fsg_lun_opts_cdrom_store(struct fsg_lun_opts *opts, + const char *page, size_t len) +{ + struct fsg_opts *fsg_opts; + + fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); + + return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page, + len); +} + +static struct fsg_lun_opts_attribute fsg_lun_opts_cdrom = + __CONFIGFS_ATTR(cdrom, S_IRUGO | S_IWUSR, fsg_lun_opts_cdrom_show, + fsg_lun_opts_cdrom_store); + +static ssize_t fsg_lun_opts_nofua_show(struct fsg_lun_opts *opts, char *page) +{ + return fsg_show_nofua(opts->lun, page); +} + +static ssize_t fsg_lun_opts_nofua_store(struct fsg_lun_opts *opts, + const char *page, size_t len) +{ + return fsg_store_nofua(opts->lun, page, len); +} + +static struct fsg_lun_opts_attribute fsg_lun_opts_nofua = + __CONFIGFS_ATTR(nofua, S_IRUGO | S_IWUSR, fsg_lun_opts_nofua_show, + fsg_lun_opts_nofua_store); + +static struct configfs_attribute *fsg_lun_attrs[] = { + &fsg_lun_opts_file.attr, + &fsg_lun_opts_ro.attr, + &fsg_lun_opts_removable.attr, + &fsg_lun_opts_cdrom.attr, + &fsg_lun_opts_nofua.attr, NULL, }; -static int fsg_bind_config(struct usb_composite_dev *cdev, - struct usb_configuration *c, - struct fsg_common *common) +static struct config_item_type fsg_lun_type = { + .ct_item_ops = &fsg_lun_item_ops, + .ct_attrs = fsg_lun_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct config_group *fsg_lun_make(struct config_group *group, + const char *name) { - struct fsg_dev *fsg; + struct fsg_lun_opts *opts; + struct fsg_opts *fsg_opts; + struct fsg_lun_config config; + char *num_str; + u8 num; + int ret; + + num_str = strchr(name, '.'); + if (!num_str) { + pr_err("Unable to locate . in LUN.NUMBER\n"); + return ERR_PTR(-EINVAL); + } + num_str++; + + ret = kstrtou8(num_str, 0, &num); + if (ret) + return ERR_PTR(ret); + + fsg_opts = to_fsg_opts(&group->cg_item); + if (num >= FSG_MAX_LUNS) + return ERR_PTR(-ERANGE); + + mutex_lock(&fsg_opts->lock); + if (fsg_opts->refcnt || fsg_opts->common->luns[num]) { + ret = -EBUSY; + goto out; + } + + opts = kzalloc(sizeof(*opts), GFP_KERNEL); + if (!opts) { + ret = -ENOMEM; + goto out; + } + + memset(&config, 0, sizeof(config)); + config.removable = true; + + ret = fsg_common_create_lun(fsg_opts->common, &config, num, name, + (const char **)&group->cg_item.ci_name); + if (ret) { + kfree(opts); + goto out; + } + opts->lun = fsg_opts->common->luns[num]; + opts->lun_id = num; + mutex_unlock(&fsg_opts->lock); + + config_group_init_type_name(&opts->group, name, &fsg_lun_type); + + return &opts->group; +out: + mutex_unlock(&fsg_opts->lock); + return ERR_PTR(ret); +} + +static void fsg_lun_drop(struct config_group *group, struct config_item *item) +{ + struct fsg_lun_opts *lun_opts; + struct fsg_opts *fsg_opts; + + lun_opts = to_fsg_lun_opts(item); + fsg_opts = to_fsg_opts(&group->cg_item); + + mutex_lock(&fsg_opts->lock); + if (fsg_opts->refcnt) { + struct config_item *gadget; + + gadget = group->cg_item.ci_parent->ci_parent; + unregister_gadget_item(gadget); + } + + fsg_common_remove_lun(lun_opts->lun, fsg_opts->common->sysfs); + fsg_opts->common->luns[lun_opts->lun_id] = NULL; + lun_opts->lun_id = 0; + mutex_unlock(&fsg_opts->lock); + + config_item_put(item); +} + +CONFIGFS_ATTR_STRUCT(fsg_opts); +CONFIGFS_ATTR_OPS(fsg_opts); + +static void fsg_attr_release(struct config_item *item) +{ + struct fsg_opts *opts = to_fsg_opts(item); + + usb_put_function_instance(&opts->func_inst); +} + +static struct configfs_item_operations fsg_item_ops = { + .release = fsg_attr_release, + .show_attribute = fsg_opts_attr_show, + .store_attribute = fsg_opts_attr_store, +}; + +static ssize_t fsg_opts_stall_show(struct fsg_opts *opts, char *page) +{ + int result; + + mutex_lock(&opts->lock); + result = sprintf(page, "%d", opts->common->can_stall); + mutex_unlock(&opts->lock); + + return result; +} + +static ssize_t fsg_opts_stall_store(struct fsg_opts *opts, const char *page, + size_t len) +{ + int ret; + bool stall; + + mutex_lock(&opts->lock); + + if (opts->refcnt) { + mutex_unlock(&opts->lock); + return -EBUSY; + } + + ret = strtobool(page, &stall); + if (!ret) { + opts->common->can_stall = stall; + ret = len; + } + + mutex_unlock(&opts->lock); + + return ret; +} + +static struct fsg_opts_attribute fsg_opts_stall = + __CONFIGFS_ATTR(stall, S_IRUGO | S_IWUSR, fsg_opts_stall_show, + fsg_opts_stall_store); + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES +static ssize_t fsg_opts_num_buffers_show(struct fsg_opts *opts, char *page) +{ + int result; + + mutex_lock(&opts->lock); + result = sprintf(page, "%d", opts->common->fsg_num_buffers); + mutex_unlock(&opts->lock); + + return result; +} + +static ssize_t fsg_opts_num_buffers_store(struct fsg_opts *opts, + const char *page, size_t len) +{ + int ret; + u8 num; + + mutex_lock(&opts->lock); + if (opts->refcnt) { + ret = -EBUSY; + goto end; + } + ret = kstrtou8(page, 0, &num); + if (ret) + goto end; + + ret = fsg_num_buffers_validate(num); + if (ret) + goto end; + + fsg_common_set_num_buffers(opts->common, num); + ret = len; + +end: + mutex_unlock(&opts->lock); + return ret; +} + +static struct fsg_opts_attribute fsg_opts_num_buffers = + __CONFIGFS_ATTR(num_buffers, S_IRUGO | S_IWUSR, + fsg_opts_num_buffers_show, + fsg_opts_num_buffers_store); + +#endif + +static struct configfs_attribute *fsg_attrs[] = { + &fsg_opts_stall.attr, +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + &fsg_opts_num_buffers.attr, +#endif + NULL, +}; + +static struct configfs_group_operations fsg_group_ops = { + .make_group = fsg_lun_make, + .drop_item = fsg_lun_drop, +}; + +static struct config_item_type fsg_func_type = { + .ct_item_ops = &fsg_item_ops, + .ct_group_ops = &fsg_group_ops, + .ct_attrs = fsg_attrs, + .ct_owner = THIS_MODULE, +}; + +static void fsg_free_inst(struct usb_function_instance *fi) +{ + struct fsg_opts *opts; + + opts = fsg_opts_from_func_inst(fi); + fsg_common_put(opts->common); + kfree(opts); +} + +static struct usb_function_instance *fsg_alloc_inst(void) +{ + struct fsg_opts *opts; + struct fsg_lun_config config; int rc; - fsg = kzalloc(sizeof *fsg, GFP_KERNEL); + opts = kzalloc(sizeof(*opts), GFP_KERNEL); + if (!opts) + return ERR_PTR(-ENOMEM); + mutex_init(&opts->lock); + opts->func_inst.free_func_inst = fsg_free_inst; + opts->common = fsg_common_setup(opts->common); + if (IS_ERR(opts->common)) { + rc = PTR_ERR(opts->common); + goto release_opts; + } + rc = fsg_common_set_nluns(opts->common, FSG_MAX_LUNS); + if (rc) + goto release_opts; + + rc = fsg_common_set_num_buffers(opts->common, + CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS); + if (rc) + goto release_luns; + + pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n"); + + memset(&config, 0, sizeof(config)); + config.removable = true; + rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0", + (const char **)&opts->func_inst.group.cg_item.ci_name); + opts->lun0.lun = opts->common->luns[0]; + opts->lun0.lun_id = 0; + config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type); + opts->default_groups[0] = &opts->lun0.group; + opts->func_inst.group.default_groups = opts->default_groups; + + config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type); + + return &opts->func_inst; + +release_luns: + kfree(opts->common->luns); +release_opts: + kfree(opts); + return ERR_PTR(rc); +} + +static void fsg_free(struct usb_function *f) +{ + struct fsg_dev *fsg; + struct fsg_opts *opts; + + fsg = container_of(f, struct fsg_dev, function); + opts = container_of(f->fi, struct fsg_opts, func_inst); + + mutex_lock(&opts->lock); + opts->refcnt--; + mutex_unlock(&opts->lock); + + kfree(fsg); +} + +static struct usb_function *fsg_alloc(struct usb_function_instance *fi) +{ + struct fsg_opts *opts = fsg_opts_from_func_inst(fi); + struct fsg_common *common = opts->common; + struct fsg_dev *fsg; + + fsg = kzalloc(sizeof(*fsg), GFP_KERNEL); if (unlikely(!fsg)) - return -ENOMEM; + return ERR_PTR(-ENOMEM); - fsg->function.name = FSG_DRIVER_DESC; - fsg->function.strings = fsg_strings_array; - fsg->function.bind = fsg_bind; - fsg->function.unbind = fsg_unbind; - fsg->function.setup = fsg_setup; - fsg->function.set_alt = fsg_set_alt; - fsg->function.disable = fsg_disable; + mutex_lock(&opts->lock); + opts->refcnt++; + mutex_unlock(&opts->lock); + fsg->function.name = FSG_DRIVER_DESC; + fsg->function.bind = fsg_bind; + fsg->function.unbind = fsg_unbind; + fsg->function.setup = fsg_setup; + fsg->function.set_alt = fsg_set_alt; + fsg->function.disable = fsg_disable; + fsg->function.free_func = fsg_free; fsg->common = common; - /* - * Our caller holds a reference to common structure so we - * don't have to be worry about it being freed until we return - * from this function. So instead of incrementing counter now - * and decrement in error recovery we increment it only when - * call to usb_add_function() was successful. - */ - rc = usb_add_function(c, &fsg->function); - if (unlikely(rc)) - kfree(fsg); - else - fsg_common_get(fsg->common); - return rc; + return &fsg->function; } +DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michal Nazarewicz"); /************************* Module parameters *************************/ -struct fsg_module_parameters { - char *file[FSG_MAX_LUNS]; - bool ro[FSG_MAX_LUNS]; - bool removable[FSG_MAX_LUNS]; - bool cdrom[FSG_MAX_LUNS]; - bool nofua[FSG_MAX_LUNS]; - - unsigned int file_count, ro_count, removable_count, cdrom_count; - unsigned int nofua_count; - unsigned int luns; /* nluns */ - bool stall; /* can_stall */ -}; -#define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc) \ - module_param_array_named(prefix ## name, params.name, type, \ - &prefix ## params.name ## _count, \ - S_IRUGO); \ - MODULE_PARM_DESC(prefix ## name, desc) - -#define _FSG_MODULE_PARAM(prefix, params, name, type, desc) \ - module_param_named(prefix ## name, params.name, type, \ - S_IRUGO); \ - MODULE_PARM_DESC(prefix ## name, desc) - -#define FSG_MODULE_PARAMETERS(prefix, params) \ - _FSG_MODULE_PARAM_ARRAY(prefix, params, file, charp, \ - "names of backing files or devices"); \ - _FSG_MODULE_PARAM_ARRAY(prefix, params, ro, bool, \ - "true to force read-only"); \ - _FSG_MODULE_PARAM_ARRAY(prefix, params, removable, bool, \ - "true to simulate removable media"); \ - _FSG_MODULE_PARAM_ARRAY(prefix, params, cdrom, bool, \ - "true to simulate CD-ROM instead of disk"); \ - _FSG_MODULE_PARAM_ARRAY(prefix, params, nofua, bool, \ - "true to ignore SCSI WRITE(10,12) FUA bit"); \ - _FSG_MODULE_PARAM(prefix, params, luns, uint, \ - "number of LUNs"); \ - _FSG_MODULE_PARAM(prefix, params, stall, bool, \ - "false to prevent bulk stalls") - -static void -fsg_config_from_params(struct fsg_config *cfg, - const struct fsg_module_parameters *params) +void fsg_config_from_params(struct fsg_config *cfg, + const struct fsg_module_parameters *params, + unsigned int fsg_num_buffers) { struct fsg_lun_config *lun; unsigned i; @@ -3053,19 +3661,7 @@ fsg_config_from_params(struct fsg_config *cfg, /* Finalise */ cfg->can_stall = params->stall; + cfg->fsg_num_buffers = fsg_num_buffers; } +EXPORT_SYMBOL_GPL(fsg_config_from_params); -static inline struct fsg_common * -fsg_common_from_params(struct fsg_common *common, - struct usb_composite_dev *cdev, - const struct fsg_module_parameters *params) - __attribute__((unused)); -static inline struct fsg_common * -fsg_common_from_params(struct fsg_common *common, - struct usb_composite_dev *cdev, - const struct fsg_module_parameters *params) -{ - struct fsg_config cfg; - fsg_config_from_params(&cfg, params); - return fsg_common_init(common, cdev, &cfg); -} diff --git a/drivers/usb/gadget/f_mass_storage.h b/drivers/usb/gadget/f_mass_storage.h new file mode 100644 index 00000000000..b4866fcef30 --- /dev/null +++ b/drivers/usb/gadget/f_mass_storage.h @@ -0,0 +1,166 @@ +#ifndef USB_F_MASS_STORAGE_H +#define USB_F_MASS_STORAGE_H + +#include <linux/usb/composite.h> +#include "storage_common.h" + +struct fsg_module_parameters { + char *file[FSG_MAX_LUNS]; + bool ro[FSG_MAX_LUNS]; + bool removable[FSG_MAX_LUNS]; + bool cdrom[FSG_MAX_LUNS]; + bool nofua[FSG_MAX_LUNS]; + + unsigned int file_count, ro_count, removable_count, cdrom_count; + unsigned int nofua_count; + unsigned int luns; /* nluns */ + bool stall; /* can_stall */ +}; + +#define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc) \ + module_param_array_named(prefix ## name, params.name, type, \ + &prefix ## params.name ## _count, \ + S_IRUGO); \ + MODULE_PARM_DESC(prefix ## name, desc) + +#define _FSG_MODULE_PARAM(prefix, params, name, type, desc) \ + module_param_named(prefix ## name, params.name, type, \ + S_IRUGO); \ + MODULE_PARM_DESC(prefix ## name, desc) + +#define __FSG_MODULE_PARAMETERS(prefix, params) \ + _FSG_MODULE_PARAM_ARRAY(prefix, params, file, charp, \ + "names of backing files or devices"); \ + _FSG_MODULE_PARAM_ARRAY(prefix, params, ro, bool, \ + "true to force read-only"); \ + _FSG_MODULE_PARAM_ARRAY(prefix, params, removable, bool, \ + "true to simulate removable media"); \ + _FSG_MODULE_PARAM_ARRAY(prefix, params, cdrom, bool, \ + "true to simulate CD-ROM instead of disk"); \ + _FSG_MODULE_PARAM_ARRAY(prefix, params, nofua, bool, \ + "true to ignore SCSI WRITE(10,12) FUA bit"); \ + _FSG_MODULE_PARAM(prefix, params, luns, uint, \ + "number of LUNs"); \ + _FSG_MODULE_PARAM(prefix, params, stall, bool, \ + "false to prevent bulk stalls") + +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +#define FSG_MODULE_PARAMETERS(prefix, params) \ + __FSG_MODULE_PARAMETERS(prefix, params); \ + module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO);\ + MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers") +#else + +#define FSG_MODULE_PARAMETERS(prefix, params) \ + __FSG_MODULE_PARAMETERS(prefix, params) + +#endif + +struct fsg_common; + +/* FSF callback functions */ +struct fsg_operations { + /* + * Callback function to call when thread exits. If no + * callback is set or it returns value lower then zero MSF + * will force eject all LUNs it operates on (including those + * marked as non-removable or with prevent_medium_removal flag + * set). + */ + int (*thread_exits)(struct fsg_common *common); +}; + +struct fsg_lun_opts { + struct config_group group; + struct fsg_lun *lun; + int lun_id; +}; + +struct fsg_opts { + struct fsg_common *common; + struct usb_function_instance func_inst; + struct fsg_lun_opts lun0; + struct config_group *default_groups[2]; + bool no_configfs; /* for legacy gadgets */ + + /* + * Read/write access to configfs attributes is handled by configfs. + * + * This is to protect the data from concurrent access by read/write + * and create symlink/remove symlink. + */ + struct mutex lock; + int refcnt; +}; + +struct fsg_lun_config { + const char *filename; + char ro; + char removable; + char cdrom; + char nofua; +}; + +struct fsg_config { + unsigned nluns; + struct fsg_lun_config luns[FSG_MAX_LUNS]; + + /* Callback functions. */ + const struct fsg_operations *ops; + /* Gadget's private data. */ + void *private_data; + + const char *vendor_name; /* 8 characters or less */ + const char *product_name; /* 16 characters or less */ + + char can_stall; + unsigned int fsg_num_buffers; +}; + +static inline struct fsg_opts * +fsg_opts_from_func_inst(const struct usb_function_instance *fi) +{ + return container_of(fi, struct fsg_opts, func_inst); +} + +void fsg_common_get(struct fsg_common *common); + +void fsg_common_put(struct fsg_common *common); + +void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs); + +int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n); + +void fsg_common_free_buffers(struct fsg_common *common); + +int fsg_common_set_cdev(struct fsg_common *common, + struct usb_composite_dev *cdev, bool can_stall); + +void fsg_common_remove_lun(struct fsg_lun *lun, bool sysfs); + +void fsg_common_remove_luns(struct fsg_common *common); + +void fsg_common_free_luns(struct fsg_common *common); + +int fsg_common_set_nluns(struct fsg_common *common, int nluns); + +void fsg_common_set_ops(struct fsg_common *common, + const struct fsg_operations *ops); + +int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, + unsigned int id, const char *name, + const char **name_pfx); + +int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg); + +void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn, + const char *pn); + +int fsg_common_run_thread(struct fsg_common *common); + +void fsg_config_from_params(struct fsg_config *cfg, + const struct fsg_module_parameters *params, + unsigned int fsg_num_buffers); + +#endif /* USB_F_MASS_STORAGE_H */ diff --git a/drivers/usb/gadget/fotg210-udc.c b/drivers/usb/gadget/fotg210-udc.c index 32db2eee2d8..bbbfd194877 100644 --- a/drivers/usb/gadget/fotg210-udc.c +++ b/drivers/usb/gadget/fotg210-udc.c @@ -1214,6 +1214,6 @@ static struct platform_driver fotg210_driver = { module_platform_driver(fotg210_driver); -MODULE_AUTHOR("Yuan-Hsin Chen <yhchen@faraday-tech.com>"); +MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index f3bb363f1d4..807127d56fa 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -33,6 +33,7 @@ #include <linux/io.h> #include <linux/moduleparam.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/dma-mapping.h> #include <linux/usb/ch9.h> diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index f1dd6daabe2..b278abe5245 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -22,7 +22,7 @@ MODULE_DESCRIPTION("FUSB300 USB gadget driver"); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Yuan Hsin Chen <yhchen@faraday-tech.com>"); +MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>"); MODULE_ALIAS("platform:fusb300_udc"); #define DRIVER_VERSION "20 October 2010" diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index 5327c82472e..2344efe4f4c 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -76,7 +76,9 @@ struct gfs_ffs_obj { USB_GADGET_COMPOSITE_OPTIONS(); +#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS USB_ETHERNET_MODULE_PARAMETERS(); +#endif static struct usb_device_descriptor gfs_dev_desc = { .bLength = sizeof gfs_dev_desc, diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index c64deb9e3d6..f8276801571 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -1165,7 +1165,7 @@ static int udc_proc_read(struct seq_file *m, void *v) s = "invalid"; break; default: s = "?"; break; - }; s; }), + } s; }), (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0", (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "", (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "", @@ -1701,7 +1701,6 @@ static void goku_remove(struct pci_dev *pdev) if (dev->enabled) pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); dev->regs = NULL; INFO(dev, "unbind\n"); diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 465ef8e2cc9..b94c049ab0d 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -524,7 +524,7 @@ struct kiocb_priv { unsigned actual; }; -static int ep_aio_cancel(struct kiocb *iocb, struct io_event *e) +static int ep_aio_cancel(struct kiocb *iocb) { struct kiocb_priv *priv = iocb->private; struct ep_data *epdata; @@ -540,7 +540,6 @@ static int ep_aio_cancel(struct kiocb *iocb, struct io_event *e) // spin_unlock(&epdata->dev->lock); local_irq_enable(); - aio_put_req(iocb); return value; } @@ -709,11 +708,11 @@ ep_aio_read(struct kiocb *iocb, const struct iovec *iov, if (unlikely(usb_endpoint_dir_in(&epdata->desc))) return -EINVAL; - buf = kmalloc(iocb->ki_left, GFP_KERNEL); + buf = kmalloc(iocb->ki_nbytes, GFP_KERNEL); if (unlikely(!buf)) return -ENOMEM; - return ep_aio_rwtail(iocb, buf, iocb->ki_left, epdata, iov, nr_segs); + return ep_aio_rwtail(iocb, buf, iocb->ki_nbytes, epdata, iov, nr_segs); } static ssize_t @@ -728,7 +727,7 @@ ep_aio_write(struct kiocb *iocb, const struct iovec *iov, if (unlikely(!usb_endpoint_dir_in(&epdata->desc))) return -EINVAL; - buf = kmalloc(iocb->ki_left, GFP_KERNEL); + buf = kmalloc(iocb->ki_nbytes, GFP_KERNEL); if (unlikely(!buf)) return -ENOMEM; diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index 67128be1e1b..6a2a65aa005 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -3078,7 +3078,9 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) udc->isp1301_i2c_client->addr); pdev->dev.dma_mask = &lpc32xx_usbd_dmamask; - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + retval = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (retval) + goto resource_fail; udc->board = &lpc32xx_usbddata; diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c index 080e577773d..8e27a8c9644 100644 --- a/drivers/usb/gadget/mass_storage.c +++ b/drivers/usb/gadget/mass_storage.c @@ -37,16 +37,16 @@ #define DRIVER_DESC "Mass Storage Gadget" #define DRIVER_VERSION "2009/09/11" -/*-------------------------------------------------------------------------*/ - /* - * kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. + * Thanks to NetChip Technologies for donating this product ID. + * + * DO NOT REUSE THESE IDs with any other driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. */ -#include "f_mass_storage.c" +#define FSG_VENDOR_ID 0x0525 /* NetChip */ +#define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */ + +#include "f_mass_storage.h" /*-------------------------------------------------------------------------*/ USB_GADGET_COMPOSITE_OPTIONS(); @@ -97,11 +97,28 @@ static struct usb_gadget_strings *dev_strings[] = { NULL, }; +static struct usb_function_instance *fi_msg; +static struct usb_function *f_msg; + /****************************** Configurations ******************************/ static struct fsg_module_parameters mod_data = { .stall = 1 }; +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS; + +#else + +/* + * Number of buffers we will use. + * 2 is usually enough for good buffering pipeline + */ +#define fsg_num_buffers CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS + +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + FSG_MODULE_PARAMETERS(/* no prefix */, mod_data); static unsigned long msg_registered; @@ -115,13 +132,7 @@ static int msg_thread_exits(struct fsg_common *common) static int __init msg_do_config(struct usb_configuration *c) { - static const struct fsg_operations ops = { - .thread_exits = msg_thread_exits, - }; - static struct fsg_common common; - - struct fsg_common *retp; - struct fsg_config config; + struct fsg_opts *opts; int ret; if (gadget_is_otg(c->cdev->gadget)) { @@ -129,15 +140,24 @@ static int __init msg_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - fsg_config_from_params(&config, &mod_data); - config.ops = &ops; + opts = fsg_opts_from_func_inst(fi_msg); + + f_msg = usb_get_function(fi_msg); + if (IS_ERR(f_msg)) + return PTR_ERR(f_msg); + + ret = fsg_common_run_thread(opts->common); + if (ret) + goto put_func; + + ret = usb_add_function(c, f_msg); + if (ret) + goto put_func; - retp = fsg_common_init(&common, c->cdev, &config); - if (IS_ERR(retp)) - return PTR_ERR(retp); + return 0; - ret = fsg_bind_config(c->cdev, c, &common); - fsg_common_put(&common); +put_func: + usb_put_function(f_msg); return ret; } @@ -152,23 +172,79 @@ static struct usb_configuration msg_config_driver = { static int __init msg_bind(struct usb_composite_dev *cdev) { + static const struct fsg_operations ops = { + .thread_exits = msg_thread_exits, + }; + struct fsg_opts *opts; + struct fsg_config config; int status; + fi_msg = usb_get_function_instance("mass_storage"); + if (IS_ERR(fi_msg)) + return PTR_ERR(fi_msg); + + fsg_config_from_params(&config, &mod_data, fsg_num_buffers); + opts = fsg_opts_from_func_inst(fi_msg); + + opts->no_configfs = true; + status = fsg_common_set_num_buffers(opts->common, fsg_num_buffers); + if (status) + goto fail; + + status = fsg_common_set_nluns(opts->common, config.nluns); + if (status) + goto fail_set_nluns; + + fsg_common_set_ops(opts->common, &ops); + + status = fsg_common_set_cdev(opts->common, cdev, config.can_stall); + if (status) + goto fail_set_cdev; + + fsg_common_set_sysfs(opts->common, true); + status = fsg_common_create_luns(opts->common, &config); + if (status) + goto fail_set_cdev; + + fsg_common_set_inquiry_string(opts->common, config.vendor_name, + config.product_name); + status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) - return status; + goto fail_string_ids; msg_device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; status = usb_add_config(cdev, &msg_config_driver, msg_do_config); if (status < 0) - return status; + goto fail_string_ids; + usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&cdev->gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); set_bit(0, &msg_registered); return 0; + +fail_string_ids: + fsg_common_remove_luns(opts->common); +fail_set_cdev: + fsg_common_free_luns(opts->common); +fail_set_nluns: + fsg_common_free_buffers(opts->common); +fail: + usb_put_function_instance(fi_msg); + return status; } +static int msg_unbind(struct usb_composite_dev *cdev) +{ + if (!IS_ERR(f_msg)) + usb_put_function(f_msg); + + if (!IS_ERR(fi_msg)) + usb_put_function_instance(fi_msg); + + return 0; +} /****************************** Some noise ******************************/ @@ -179,6 +255,7 @@ static __refdata struct usb_composite_driver msg_driver = { .needs_serial = 1, .strings = dev_strings, .bind = msg_bind, + .unbind = msg_unbind, }; MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index 2a1ebefd8f9..4fdaa54a2a2 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/netdevice.h> #include "u_serial.h" #if defined USB_ETH_RNDIS @@ -32,22 +33,11 @@ MODULE_AUTHOR("Michal Nazarewicz"); MODULE_LICENSE("GPL"); -/***************************** All the files... *****************************/ +#include "f_mass_storage.h" -/* - * kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "f_mass_storage.c" - -#define USBF_ECM_INCLUDED -#include "f_ecm.c" +#include "u_ecm.h" #ifdef USB_ETH_RNDIS -# define USB_FRNDIS_INCLUDED -# include "f_rndis.c" +# include "u_rndis.h" # include "rndis.h" #endif #include "u_ether.h" @@ -132,22 +122,36 @@ static struct usb_gadget_strings *dev_strings[] = { /****************************** Configurations ******************************/ static struct fsg_module_parameters fsg_mod_data = { .stall = 1 }; -FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data); +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS; -static struct fsg_common fsg_common; +#else + +/* + * Number of buffers we will use. + * 2 is usually enough for good buffering pipeline + */ +#define fsg_num_buffers CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS -static u8 host_mac[ETH_ALEN]; +#endif /* CONFIG_USB_DEBUG */ + +FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data); static struct usb_function_instance *fi_acm; -static struct eth_dev *the_dev; +static struct usb_function_instance *fi_msg; /********** RNDIS **********/ #ifdef USB_ETH_RNDIS +static struct usb_function_instance *fi_rndis; static struct usb_function *f_acm_rndis; +static struct usb_function *f_rndis; +static struct usb_function *f_msg_rndis; static __init int rndis_do_config(struct usb_configuration *c) { + struct fsg_opts *fsg_opts; int ret; if (gadget_is_otg(c->cdev->gadget)) { @@ -155,31 +159,54 @@ static __init int rndis_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - ret = rndis_bind_config(c, host_mac, the_dev); + f_rndis = usb_get_function(fi_rndis); + if (IS_ERR(f_rndis)) + return PTR_ERR(f_rndis); + + ret = usb_add_function(c, f_rndis); if (ret < 0) - return ret; + goto err_func_rndis; f_acm_rndis = usb_get_function(fi_acm); - if (IS_ERR(f_acm_rndis)) - return PTR_ERR(f_acm_rndis); + if (IS_ERR(f_acm_rndis)) { + ret = PTR_ERR(f_acm_rndis); + goto err_func_acm; + } ret = usb_add_function(c, f_acm_rndis); if (ret) goto err_conf; - ret = fsg_bind_config(c->cdev, c, &fsg_common); - if (ret < 0) + f_msg_rndis = usb_get_function(fi_msg); + if (IS_ERR(f_msg_rndis)) { + ret = PTR_ERR(f_msg_rndis); goto err_fsg; + } + + fsg_opts = fsg_opts_from_func_inst(fi_msg); + ret = fsg_common_run_thread(fsg_opts->common); + if (ret) + goto err_run; + + ret = usb_add_function(c, f_msg_rndis); + if (ret) + goto err_run; return 0; +err_run: + usb_put_function(f_msg_rndis); err_fsg: usb_remove_function(c, f_acm_rndis); err_conf: usb_put_function(f_acm_rndis); +err_func_acm: + usb_remove_function(c, f_rndis); +err_func_rndis: + usb_put_function(f_rndis); return ret; } -static int rndis_config_register(struct usb_composite_dev *cdev) +static __ref int rndis_config_register(struct usb_composite_dev *cdev) { static struct usb_configuration config = { .bConfigurationValue = MULTI_RNDIS_CONFIG_NUM, @@ -194,7 +221,7 @@ static int rndis_config_register(struct usb_composite_dev *cdev) #else -static int rndis_config_register(struct usb_composite_dev *cdev) +static __ref int rndis_config_register(struct usb_composite_dev *cdev) { return 0; } @@ -205,10 +232,14 @@ static int rndis_config_register(struct usb_composite_dev *cdev) /********** CDC ECM **********/ #ifdef CONFIG_USB_G_MULTI_CDC +static struct usb_function_instance *fi_ecm; static struct usb_function *f_acm_multi; +static struct usb_function *f_ecm; +static struct usb_function *f_msg_multi; static __init int cdc_do_config(struct usb_configuration *c) { + struct fsg_opts *fsg_opts; int ret; if (gadget_is_otg(c->cdev->gadget)) { @@ -216,32 +247,55 @@ static __init int cdc_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - ret = ecm_bind_config(c, host_mac, the_dev); + f_ecm = usb_get_function(fi_ecm); + if (IS_ERR(f_ecm)) + return PTR_ERR(f_ecm); + + ret = usb_add_function(c, f_ecm); if (ret < 0) - return ret; + goto err_func_ecm; /* implicit port_num is zero */ f_acm_multi = usb_get_function(fi_acm); - if (IS_ERR(f_acm_multi)) - return PTR_ERR(f_acm_multi); + if (IS_ERR(f_acm_multi)) { + ret = PTR_ERR(f_acm_multi); + goto err_func_acm; + } ret = usb_add_function(c, f_acm_multi); if (ret) goto err_conf; - ret = fsg_bind_config(c->cdev, c, &fsg_common); - if (ret < 0) + f_msg_multi = usb_get_function(fi_msg); + if (IS_ERR(f_msg_multi)) { + ret = PTR_ERR(f_msg_multi); goto err_fsg; + } + + fsg_opts = fsg_opts_from_func_inst(fi_msg); + ret = fsg_common_run_thread(fsg_opts->common); + if (ret) + goto err_run; + + ret = usb_add_function(c, f_msg_multi); + if (ret) + goto err_run; return 0; +err_run: + usb_put_function(f_msg_multi); err_fsg: usb_remove_function(c, f_acm_multi); err_conf: usb_put_function(f_acm_multi); +err_func_acm: + usb_remove_function(c, f_ecm); +err_func_ecm: + usb_put_function(f_ecm); return ret; } -static int cdc_config_register(struct usb_composite_dev *cdev) +static __ref int cdc_config_register(struct usb_composite_dev *cdev) { static struct usb_configuration config = { .bConfigurationValue = MULTI_CDC_CONFIG_NUM, @@ -256,7 +310,7 @@ static int cdc_config_register(struct usb_composite_dev *cdev) #else -static int cdc_config_register(struct usb_composite_dev *cdev) +static __ref int cdc_config_register(struct usb_composite_dev *cdev) { return 0; } @@ -270,19 +324,67 @@ static int cdc_config_register(struct usb_composite_dev *cdev) static int __ref multi_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; +#ifdef CONFIG_USB_G_MULTI_CDC + struct f_ecm_opts *ecm_opts; +#endif +#ifdef USB_ETH_RNDIS + struct f_rndis_opts *rndis_opts; +#endif + struct fsg_opts *fsg_opts; + struct fsg_config config; int status; if (!can_support_ecm(cdev->gadget)) { dev_err(&gadget->dev, "controller '%s' not usable\n", - gadget->name); + gadget->name); return -EINVAL; } - /* set up network link layer */ - the_dev = gether_setup(cdev->gadget, dev_addr, host_addr, host_mac, - qmult); - if (IS_ERR(the_dev)) - return PTR_ERR(the_dev); +#ifdef CONFIG_USB_G_MULTI_CDC + fi_ecm = usb_get_function_instance("ecm"); + if (IS_ERR(fi_ecm)) + return PTR_ERR(fi_ecm); + + ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst); + + gether_set_qmult(ecm_opts->net, qmult); + if (!gether_set_host_addr(ecm_opts->net, host_addr)) + pr_info("using host ethernet address: %s", host_addr); + if (!gether_set_dev_addr(ecm_opts->net, dev_addr)) + pr_info("using self ethernet address: %s", dev_addr); +#endif + +#ifdef USB_ETH_RNDIS + fi_rndis = usb_get_function_instance("rndis"); + if (IS_ERR(fi_rndis)) { + status = PTR_ERR(fi_rndis); + goto fail; + } + + rndis_opts = container_of(fi_rndis, struct f_rndis_opts, func_inst); + + gether_set_qmult(rndis_opts->net, qmult); + if (!gether_set_host_addr(rndis_opts->net, host_addr)) + pr_info("using host ethernet address: %s", host_addr); + if (!gether_set_dev_addr(rndis_opts->net, dev_addr)) + pr_info("using self ethernet address: %s", dev_addr); +#endif + +#if (defined CONFIG_USB_G_MULTI_CDC && defined USB_ETH_RNDIS) + /* + * If both ecm and rndis are selected then: + * 1) rndis borrows the net interface from ecm + * 2) since the interface is shared it must not be bound + * twice - in ecm's _and_ rndis' binds, so do it here. + */ + gether_set_gadget(ecm_opts->net, cdev->gadget); + status = gether_register_netdev(ecm_opts->net); + if (status) + goto fail0; + + rndis_borrow_net(fi_rndis, ecm_opts->net); + ecm_opts->bound = true; +#endif /* set up serial link layer */ fi_acm = usb_get_function_instance("acm"); @@ -292,57 +394,102 @@ static int __ref multi_bind(struct usb_composite_dev *cdev) } /* set up mass storage function */ - { - void *retp; - retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data); - if (IS_ERR(retp)) { - status = PTR_ERR(retp); - goto fail1; - } + fi_msg = usb_get_function_instance("mass_storage"); + if (IS_ERR(fi_msg)) { + status = PTR_ERR(fi_msg); + goto fail1; } + fsg_config_from_params(&config, &fsg_mod_data, fsg_num_buffers); + fsg_opts = fsg_opts_from_func_inst(fi_msg); + + fsg_opts->no_configfs = true; + status = fsg_common_set_num_buffers(fsg_opts->common, fsg_num_buffers); + if (status) + goto fail2; + + status = fsg_common_set_nluns(fsg_opts->common, config.nluns); + if (status) + goto fail_set_nluns; + + status = fsg_common_set_cdev(fsg_opts->common, cdev, config.can_stall); + if (status) + goto fail_set_cdev; + + fsg_common_set_sysfs(fsg_opts->common, true); + status = fsg_common_create_luns(fsg_opts->common, &config); + if (status) + goto fail_set_cdev; + + fsg_common_set_inquiry_string(fsg_opts->common, config.vendor_name, + config.product_name); /* allocate string IDs */ status = usb_string_ids_tab(cdev, strings_dev); if (unlikely(status < 0)) - goto fail2; + goto fail_string_ids; device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id; /* register configurations */ status = rndis_config_register(cdev); if (unlikely(status < 0)) - goto fail2; + goto fail_string_ids; status = cdc_config_register(cdev); if (unlikely(status < 0)) - goto fail2; + goto fail_string_ids; usb_composite_overwrite_options(cdev, &coverwrite); /* we're done */ dev_info(&gadget->dev, DRIVER_DESC "\n"); - fsg_common_put(&fsg_common); return 0; /* error recovery */ +fail_string_ids: + fsg_common_remove_luns(fsg_opts->common); +fail_set_cdev: + fsg_common_free_luns(fsg_opts->common); +fail_set_nluns: + fsg_common_free_buffers(fsg_opts->common); fail2: - fsg_common_put(&fsg_common); + usb_put_function_instance(fi_msg); fail1: usb_put_function_instance(fi_acm); fail0: - gether_cleanup(the_dev); +#ifdef USB_ETH_RNDIS + usb_put_function_instance(fi_rndis); +fail: +#endif +#ifdef CONFIG_USB_G_MULTI_CDC + usb_put_function_instance(fi_ecm); +#endif return status; } static int __exit multi_unbind(struct usb_composite_dev *cdev) { #ifdef CONFIG_USB_G_MULTI_CDC + usb_put_function(f_msg_multi); +#endif +#ifdef USB_ETH_RNDIS + usb_put_function(f_msg_rndis); +#endif + usb_put_function_instance(fi_msg); +#ifdef CONFIG_USB_G_MULTI_CDC usb_put_function(f_acm_multi); #endif #ifdef USB_ETH_RNDIS usb_put_function(f_acm_rndis); #endif usb_put_function_instance(fi_acm); - gether_cleanup(the_dev); +#ifdef USB_ETH_RNDIS + usb_put_function(f_rndis); + usb_put_function_instance(fi_rndis); +#endif +#ifdef CONFIG_USB_G_MULTI_CDC + usb_put_function(f_ecm); + usb_put_function_instance(fi_ecm); +#endif return 0; } diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c index bbb6e98c438..234711eabea 100644 --- a/drivers/usb/gadget/mv_u3d_core.c +++ b/drivers/usb/gadget/mv_u3d_core.c @@ -310,6 +310,7 @@ static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req, */ trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma); if (!trb_hw) { + kfree(trb); dev_err(u3d->dev, "%s, dma_pool_alloc fail\n", __func__); return NULL; @@ -454,6 +455,7 @@ static int mv_u3d_req_to_trb(struct mv_u3d_req *req) trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC); if (!trb_hw) { + kfree(trb); dev_err(u3d->dev, "%s, trb_hw alloc fail\n", __func__); return -ENOMEM; @@ -645,6 +647,7 @@ static int mv_u3d_ep_disable(struct usb_ep *_ep) struct mv_u3d_ep *ep; struct mv_u3d_ep_context *ep_context; u32 epxcr, direction; + unsigned long flags; if (!_ep) return -EINVAL; @@ -661,7 +664,9 @@ static int mv_u3d_ep_disable(struct usb_ep *_ep) direction = mv_u3d_ep_dir(ep); /* nuke all pending requests (does flush) */ + spin_lock_irqsave(&u3d->lock, flags); mv_u3d_nuke(ep, -ESHUTDOWN); + spin_unlock_irqrestore(&u3d->lock, flags); /* Disable the endpoint for Rx or Tx and reset the endpoint type */ if (direction == MV_U3D_EP_DIR_OUT) { @@ -1933,7 +1938,7 @@ static int mv_u3d_probe(struct platform_device *dev) } u3d->irq = r->start; if (request_irq(u3d->irq, mv_u3d_irq, - IRQF_DISABLED | IRQF_SHARED, driver_name, u3d)) { + IRQF_SHARED, driver_name, u3d)) { u3d->irq = 0; dev_err(&dev->dev, "Request irq %d for u3d failed\n", u3d->irq); diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 0781bff7001..fc852177c08 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -129,7 +129,7 @@ static char *type_string (u8 bmAttributes) case USB_ENDPOINT_XFER_BULK: return "bulk"; case USB_ENDPOINT_XFER_ISOC: return "iso"; case USB_ENDPOINT_XFER_INT: return "intr"; - }; + } return "control"; } #endif @@ -1630,7 +1630,7 @@ static ssize_t queues_show(struct device *_dev, struct device_attribute *attr, val = "intr"; break; default: val = "iso"; break; - }; val; }), + } val; }), usb_endpoint_maxp (d) & 0x1fff, ep->dma ? "dma" : "pio", ep->fifo_size ); @@ -2680,7 +2680,6 @@ static void net2280_remove (struct pci_dev *pdev) if (dev->enabled) pci_disable_device (pdev); device_remove_file (&pdev->dev, &dev_attr_registers); - pci_set_drvdata (pdev, NULL); INFO (dev, "unbind\n"); } diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 24174e1d156..32d5e923750 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -3080,7 +3080,6 @@ static void pch_udc_remove(struct pci_dev *pdev) if (dev->active) pci_disable_device(pdev); kfree(dev); - pci_set_drvdata(pdev, NULL); } #ifdef CONFIG_PM diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index cc9207473db..0ac6064aa3b 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -2054,7 +2054,7 @@ static struct pxa25x_udc memory = { /* * probe - binds to the platform device */ -static int __init pxa25x_udc_probe(struct platform_device *pdev) +static int pxa25x_udc_probe(struct platform_device *pdev) { struct pxa25x_udc *dev = &memory; int retval, irq; @@ -2203,7 +2203,7 @@ static void pxa25x_udc_shutdown(struct platform_device *_dev) pullup_off(); } -static int __exit pxa25x_udc_remove(struct platform_device *pdev) +static int pxa25x_udc_remove(struct platform_device *pdev) { struct pxa25x_udc *dev = platform_get_drvdata(pdev); @@ -2294,7 +2294,8 @@ static int pxa25x_udc_resume(struct platform_device *dev) static struct platform_driver udc_driver = { .shutdown = pxa25x_udc_shutdown, - .remove = __exit_p(pxa25x_udc_remove), + .probe = pxa25x_udc_probe, + .remove = pxa25x_udc_remove, .suspend = pxa25x_udc_suspend, .resume = pxa25x_udc_resume, .driver = { @@ -2303,7 +2304,7 @@ static struct platform_driver udc_driver = { }, }; -module_platform_driver_probe(udc_driver, pxa25x_udc_probe); +module_platform_driver(udc_driver); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell"); diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 9575085ded8..a3ad732bc81 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -1068,7 +1068,7 @@ static int rndis_proc_show(struct seq_file *m, void *v) s = "RNDIS_INITIALIZED"; break; case RNDIS_DATA_INITIALIZED: s = "RNDIS_DATA_INITIALIZED"; break; - }; s; }), + } s; }), param->medium, (param->media_state) ? 0 : param->speed*100, (param->media_state) ? "disconnected" : "connected", diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index d69b36a99db..9875d9c0823 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -83,9 +83,12 @@ struct s3c_hsotg_req; * @dir_in: Set to true if this endpoint is of the IN direction, which * means that it is sending data to the Host. * @index: The index for the endpoint registers. + * @mc: Multi Count - number of transactions per microframe + * @interval - Interval for periodic endpoints * @name: The name array passed to the USB core. * @halted: Set if the endpoint has been halted. * @periodic: Set if this is a periodic ep, such as Interrupt + * @isochronous: Set if this is a isochronous ep * @sent_zlp: Set if we've sent a zero-length packet. * @total_data: The total number of data bytes done. * @fifo_size: The size of the FIFO (for periodic IN endpoints) @@ -121,9 +124,12 @@ struct s3c_hsotg_ep { unsigned char dir_in; unsigned char index; + unsigned char mc; + unsigned char interval; unsigned int halted:1; unsigned int periodic:1; + unsigned int isochronous:1; unsigned int sent_zlp:1; char name[10]; @@ -468,6 +474,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, void *data; int can_write; int pkt_round; + int max_transfer; to_write -= (buf_pos - hs_ep->last_load); @@ -535,15 +542,17 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, can_write *= 4; /* fifo size is in 32bit quantities. */ } - dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n", - __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket); + max_transfer = hs_ep->ep.maxpacket * hs_ep->mc; + + dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, max_transfer %d\n", + __func__, gnptxsts, can_write, to_write, max_transfer); /* * limit to 512 bytes of data, it seems at least on the non-periodic * FIFO, requests of >512 cause the endpoint to get stuck with a * fragment of the end of the transfer in it. */ - if (can_write > 512) + if (can_write > 512 && !periodic) can_write = 512; /* @@ -551,19 +560,21 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, * the transfer to return that it did not run out of fifo space * doing it. */ - if (to_write > hs_ep->ep.maxpacket) { - to_write = hs_ep->ep.maxpacket; + if (to_write > max_transfer) { + to_write = max_transfer; - s3c_hsotg_en_gsint(hsotg, - periodic ? GINTSTS_PTxFEmp : - GINTSTS_NPTxFEmp); + /* it's needed only when we do not use dedicated fifos */ + if (!hsotg->dedicated_fifos) + s3c_hsotg_en_gsint(hsotg, + periodic ? GINTSTS_PTxFEmp : + GINTSTS_NPTxFEmp); } /* see if we can write data */ if (to_write > can_write) { to_write = can_write; - pkt_round = to_write % hs_ep->ep.maxpacket; + pkt_round = to_write % max_transfer; /* * Round the write down to an @@ -581,9 +592,11 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, * is more room left. */ - s3c_hsotg_en_gsint(hsotg, - periodic ? GINTSTS_PTxFEmp : - GINTSTS_NPTxFEmp); + /* it's needed only when we do not use dedicated fifos */ + if (!hsotg->dedicated_fifos) + s3c_hsotg_en_gsint(hsotg, + periodic ? GINTSTS_PTxFEmp : + GINTSTS_NPTxFEmp); } dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n", @@ -727,8 +740,16 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, else packets = 1; /* send one packet if length is zero. */ + if (hs_ep->isochronous && length > (hs_ep->mc * hs_ep->ep.maxpacket)) { + dev_err(hsotg->dev, "req length > maxpacket*mc\n"); + return; + } + if (dir_in && index != 0) - epsize = DxEPTSIZ_MC(1); + if (hs_ep->isochronous) + epsize = DxEPTSIZ_MC(packets); + else + epsize = DxEPTSIZ_MC(1); else epsize = 0; @@ -820,6 +841,9 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, readl(hsotg->regs + epctrl_reg)); + + /* enable ep interrupts */ + s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1); } /** @@ -1091,6 +1115,7 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg, bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE); struct s3c_hsotg_ep *ep; int ret; + bool halted; dev_dbg(hsotg->dev, "%s: %s_FEATURE\n", __func__, set ? "SET" : "CLEAR"); @@ -1105,6 +1130,8 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg, switch (le16_to_cpu(ctrl->wValue)) { case USB_ENDPOINT_HALT: + halted = ep->halted; + s3c_hsotg_ep_sethalt(&ep->ep, set); ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0); @@ -1114,7 +1141,12 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg, return ret; } - if (!set) { + /* + * we have to complete all requests for ep if it was + * halted, and the halt was cleared by CLEAR_FEATURE + */ + + if (!set && halted) { /* * If we have request in progress, * then complete it @@ -1147,6 +1179,8 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg, return 1; } +static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg); + /** * s3c_hsotg_process_control - process a control request * @hsotg: The device state @@ -1246,11 +1280,15 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, * don't believe we need to anything more to get the EP * to reply with a STALL packet */ + + /* + * complete won't be called, so we enqueue + * setup request here + */ + s3c_hsotg_enqueue_setup(hsotg); } } -static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg); - /** * s3c_hsotg_complete_setup - completion of a setup transfer * @ep: The endpoint the request was on. @@ -1698,6 +1736,7 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep]; void __iomem *regs = hsotg->regs; u32 mpsval; + u32 mcval; u32 reg; if (ep == 0) { @@ -1705,15 +1744,19 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, mpsval = s3c_hsotg_ep0_mps(mps); if (mpsval > 3) goto bad_mps; + hs_ep->ep.maxpacket = mps; + hs_ep->mc = 1; } else { - if (mps >= DxEPCTL_MPS_LIMIT+1) + mpsval = mps & DxEPCTL_MPS_MASK; + if (mpsval > 1024) goto bad_mps; - - mpsval = mps; + mcval = ((mps >> 11) & 0x3) + 1; + hs_ep->mc = mcval; + if (mcval > 3) + goto bad_mps; + hs_ep->ep.maxpacket = mpsval; } - hs_ep->ep.maxpacket = mps; - /* * update both the in and out endpoint controldir_ registers, even * if one of the directions may not be in use. @@ -1782,8 +1825,16 @@ static int s3c_hsotg_trytx(struct s3c_hsotg *hsotg, { struct s3c_hsotg_req *hs_req = hs_ep->req; - if (!hs_ep->dir_in || !hs_req) + if (!hs_ep->dir_in || !hs_req) { + /** + * if request is not enqueued, we disable interrupts + * for endpoints, excepting ep0 + */ + if (hs_ep->index != 0) + s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, + hs_ep->dir_in, 0); return 0; + } if (hs_req->req.actual < hs_req->req.length) { dev_dbg(hsotg->dev, "trying to write more for ep%d\n", @@ -1887,8 +1938,10 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx); u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx); u32 ints; + u32 ctrl; ints = readl(hsotg->regs + epint_reg); + ctrl = readl(hsotg->regs + epctl_reg); /* Clear endpoint interrupts */ writel(ints, hsotg->regs + epint_reg); @@ -1897,6 +1950,14 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, __func__, idx, dir_in ? "in" : "out", ints); if (ints & DxEPINT_XferCompl) { + if (hs_ep->isochronous && hs_ep->interval == 1) { + if (ctrl & DxEPCTL_EOFrNum) + ctrl |= DxEPCTL_SetEvenFr; + else + ctrl |= DxEPCTL_SetOddFr; + writel(ctrl, hsotg->regs + epctl_reg); + } + dev_dbg(hsotg->dev, "%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n", __func__, readl(hsotg->regs + epctl_reg), @@ -1963,7 +2024,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, if (ints & DxEPINT_Back2BackSetup) dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__); - if (dir_in) { + if (dir_in && !hs_ep->isochronous) { /* not sure if this is important, but we'll clear it anyway */ if (ints & DIEPMSK_INTknTXFEmpMsk) { dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n", @@ -2092,12 +2153,14 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, } #define call_gadget(_hs, _entry) \ +do { \ if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \ (_hs)->driver && (_hs)->driver->_entry) { \ spin_unlock(&_hs->lock); \ (_hs)->driver->_entry(&(_hs)->gadget); \ spin_lock(&_hs->lock); \ - } + } \ +} while (0) /** * s3c_hsotg_disconnect - disconnect service @@ -2241,15 +2304,19 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg) GAHBCFG_HBstLen_Incr4, hsotg->regs + GAHBCFG); else - writel(GAHBCFG_GlblIntrEn, hsotg->regs + GAHBCFG); + writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NPTxFEmpLvl | + GAHBCFG_PTxFEmpLvl) : 0) | + GAHBCFG_GlblIntrEn, + hsotg->regs + GAHBCFG); /* - * Enabling INTknTXFEmpMsk here seems to be a big mistake, we end - * up being flooded with interrupts if the host is polling the - * endpoint to try and read data. + * If INTknTXFEmpMsk is enabled, it's important to disable ep interrupts + * when we have no data to transfer. Otherwise we get being flooded by + * interrupts. */ - writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty : 0) | + writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty | + DIEPMSK_INTknTXFEmpMsk : 0) | DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk | DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk | DIEPMSK_INTknEPMisMsk, @@ -2378,10 +2445,14 @@ irq_retry: if (gintsts & (GINTSTS_OEPInt | GINTSTS_IEPInt)) { u32 daint = readl(hsotg->regs + DAINT); - u32 daint_out = daint >> DAINT_OutEP_SHIFT; - u32 daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT); + u32 daintmsk = readl(hsotg->regs + DAINTMSK); + u32 daint_out, daint_in; int ep; + daint &= daintmsk; + daint_out = daint >> DAINT_OutEP_SHIFT; + daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT); + dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint); for (ep = 0; ep < 15 && daint_out; ep++, daint_out >>= 1) { @@ -2475,8 +2546,6 @@ irq_retry: if (gintsts & GINTSTS_ErlySusp) { dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n"); writel(GINTSTS_ErlySusp, hsotg->regs + GINTSTS); - - s3c_hsotg_disconnect(hsotg); } /* @@ -2579,16 +2648,25 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, epctrl |= DxEPCTL_SNAK; /* update the endpoint state */ - hs_ep->ep.maxpacket = mps; + s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps); /* default, set to non-periodic */ + hs_ep->isochronous = 0; hs_ep->periodic = 0; + hs_ep->halted = 0; + hs_ep->interval = desc->bInterval; + + if (hs_ep->interval > 1 && hs_ep->mc > 1) + dev_err(hsotg->dev, "MC > 1 when interval is not 1\n"); switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { case USB_ENDPOINT_XFER_ISOC: - dev_err(hsotg->dev, "no current ISOC support\n"); - ret = -EINVAL; - goto out; + epctrl |= DxEPCTL_EPType_Iso; + epctrl |= DxEPCTL_SetEvenFr; + hs_ep->isochronous = 1; + if (dir_in) + hs_ep->periodic = 1; + break; case USB_ENDPOINT_XFER_BULK: epctrl |= DxEPCTL_EPType_Bulk; @@ -2636,7 +2714,6 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, /* enable the endpoint interrupt */ s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1); -out: spin_unlock_irqrestore(&hsotg->lock, flags); return ret; } @@ -2778,6 +2855,8 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) writel(epctl, hs->regs + epreg); + hs_ep->halted = value; + return 0; } @@ -2905,7 +2984,7 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget, int ret; if (!hsotg) { - printk(KERN_ERR "%s: called with no device\n", __func__); + pr_err("%s: called with no device\n", __func__); return -ENODEV; } @@ -2962,9 +3041,6 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, if (!hsotg) return -ENODEV; - if (!driver || driver != hsotg->driver || !driver->unbind) - return -EINVAL; - /* all endpoints should be shutdown */ for (ep = 0; ep < hsotg->num_of_eps; ep++) s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); @@ -2972,15 +3048,15 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, spin_lock_irqsave(&hsotg->lock, flags); s3c_hsotg_phy_disable(hsotg); - regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); - hsotg->driver = NULL; + if (!driver) + hsotg->driver = NULL; + hsotg->gadget.speed = USB_SPEED_UNKNOWN; spin_unlock_irqrestore(&hsotg->lock, flags); - dev_info(hsotg->dev, "unregistered gadget driver '%s'\n", - driver->driver.name); + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); return 0; } @@ -3071,7 +3147,7 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg, hs_ep->parent = hsotg; hs_ep->ep.name = hs_ep->name; - hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT; + hs_ep->ep.maxpacket = epnum ? 1024 : EP0_MPS_LIMIT; hs_ep->ep.ops = &s3c_hsotg_ep_ops; /* @@ -3205,7 +3281,7 @@ static int state_show(struct seq_file *seq, void *v) readl(regs + GNPTXSTS), readl(regs + GRXSTSR)); - seq_printf(seq, "\nEndpoint status:\n"); + seq_puts(seq, "\nEndpoint status:\n"); for (idx = 0; idx < 15; idx++) { u32 in, out; @@ -3222,7 +3298,7 @@ static int state_show(struct seq_file *seq, void *v) seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x", in, out); - seq_printf(seq, "\n"); + seq_puts(seq, "\n"); } return 0; @@ -3256,7 +3332,7 @@ static int fifo_show(struct seq_file *seq, void *v) u32 val; int idx; - seq_printf(seq, "Non-periodic FIFOs:\n"); + seq_puts(seq, "Non-periodic FIFOs:\n"); seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ)); val = readl(regs + GNPTXFSIZ); @@ -3264,7 +3340,7 @@ static int fifo_show(struct seq_file *seq, void *v) val >> GNPTXFSIZ_NPTxFDep_SHIFT, val & GNPTXFSIZ_NPTxFStAddr_MASK); - seq_printf(seq, "\nPeriodic TXFIFOs:\n"); + seq_puts(seq, "\nPeriodic TXFIFOs:\n"); for (idx = 1; idx <= 15; idx++) { val = readl(regs + DPTXFSIZn(idx)); @@ -3335,7 +3411,7 @@ static int ep_show(struct seq_file *seq, void *v) readl(regs + DIEPTSIZ(index)), readl(regs + DOEPTSIZ(index))); - seq_printf(seq, "\n"); + seq_puts(seq, "\n"); seq_printf(seq, "mps %d\n", ep->ep.maxpacket); seq_printf(seq, "total_data=%ld\n", ep->total_data); @@ -3346,7 +3422,7 @@ static int ep_show(struct seq_file *seq, void *v) list_for_each_entry(req, &ep->queue, queue) { if (--show_limit < 0) { - seq_printf(seq, "not showing more requests...\n"); + seq_puts(seq, "not showing more requests...\n"); break; } diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index 08a1a3210a2..ec20a1f50c2 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -23,242 +23,17 @@ * The valid range of num_buffers is: num >= 2 && num <= 4. */ +#include <linux/module.h> +#include <linux/blkdev.h> +#include <linux/file.h> +#include <linux/fs.h> +#include <linux/usb/composite.h> -#include <linux/usb/storage.h> -#include <scsi/scsi.h> -#include <asm/unaligned.h> - - -/* - * Thanks to NetChip Technologies for donating this product ID. - * - * DO NOT REUSE THESE IDs with any other driver!! Ever!! - * Instead: allocate your own, using normal USB-IF procedures. - */ -#define FSG_VENDOR_ID 0x0525 /* NetChip */ -#define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */ - - -/*-------------------------------------------------------------------------*/ - - -#ifndef DEBUG -#undef VERBOSE_DEBUG -#undef DUMP_MSGS -#endif /* !DEBUG */ - -#ifdef VERBOSE_DEBUG -#define VLDBG LDBG -#else -#define VLDBG(lun, fmt, args...) do { } while (0) -#endif /* VERBOSE_DEBUG */ - -#define LDBG(lun, fmt, args...) dev_dbg (&(lun)->dev, fmt, ## args) -#define LERROR(lun, fmt, args...) dev_err (&(lun)->dev, fmt, ## args) -#define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args) -#define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args) - - -#ifdef DUMP_MSGS - -# define dump_msg(fsg, /* const char * */ label, \ - /* const u8 * */ buf, /* unsigned */ length) do { \ - if (length < 512) { \ - DBG(fsg, "%s, length %u:\n", label, length); \ - print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \ - 16, 1, buf, length, 0); \ - } \ -} while (0) - -# define dump_cdb(fsg) do { } while (0) - -#else - -# define dump_msg(fsg, /* const char * */ label, \ - /* const u8 * */ buf, /* unsigned */ length) do { } while (0) - -# ifdef VERBOSE_DEBUG - -# define dump_cdb(fsg) \ - print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, \ - 16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0) \ - -# else - -# define dump_cdb(fsg) do { } while (0) - -# endif /* VERBOSE_DEBUG */ - -#endif /* DUMP_MSGS */ - -/*-------------------------------------------------------------------------*/ - -/* Length of a SCSI Command Data Block */ -#define MAX_COMMAND_SIZE 16 - -/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */ -#define SS_NO_SENSE 0 -#define SS_COMMUNICATION_FAILURE 0x040800 -#define SS_INVALID_COMMAND 0x052000 -#define SS_INVALID_FIELD_IN_CDB 0x052400 -#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100 -#define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500 -#define SS_MEDIUM_NOT_PRESENT 0x023a00 -#define SS_MEDIUM_REMOVAL_PREVENTED 0x055302 -#define SS_NOT_READY_TO_READY_TRANSITION 0x062800 -#define SS_RESET_OCCURRED 0x062900 -#define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900 -#define SS_UNRECOVERED_READ_ERROR 0x031100 -#define SS_WRITE_ERROR 0x030c02 -#define SS_WRITE_PROTECTED 0x072700 - -#define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */ -#define ASC(x) ((u8) ((x) >> 8)) -#define ASCQ(x) ((u8) (x)) - - -/*-------------------------------------------------------------------------*/ - - -struct fsg_lun { - struct file *filp; - loff_t file_length; - loff_t num_sectors; - - unsigned int initially_ro:1; - unsigned int ro:1; - unsigned int removable:1; - unsigned int cdrom:1; - unsigned int prevent_medium_removal:1; - unsigned int registered:1; - unsigned int info_valid:1; - unsigned int nofua:1; - - u32 sense_data; - u32 sense_data_info; - u32 unit_attention_data; - - unsigned int blkbits; /* Bits of logical block size of bound block device */ - unsigned int blksize; /* logical block size of bound block device */ - struct device dev; -}; - -static inline bool fsg_lun_is_open(struct fsg_lun *curlun) -{ - return curlun->filp != NULL; -} - -static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev) -{ - return container_of(dev, struct fsg_lun, dev); -} - - -/* Big enough to hold our biggest descriptor */ -#define EP0_BUFSIZE 256 -#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ - -#ifdef CONFIG_USB_GADGET_DEBUG_FILES - -static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS; -module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO); -MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers"); - -#else - -/* - * Number of buffers we will use. - * 2 is usually enough for good buffering pipeline - */ -#define fsg_num_buffers CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS - -#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ - -/* check if fsg_num_buffers is within a valid range */ -static inline int fsg_num_buffers_validate(void) -{ - if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4) - return 0; - pr_err("fsg_num_buffers %u is out of range (%d to %d)\n", - fsg_num_buffers, 2 ,4); - return -EINVAL; -} - -/* Default size of buffer length. */ -#define FSG_BUFLEN ((u32)16384) - -/* Maximal number of LUNs supported in mass storage function */ -#define FSG_MAX_LUNS 8 - -enum fsg_buffer_state { - BUF_STATE_EMPTY = 0, - BUF_STATE_FULL, - BUF_STATE_BUSY -}; - -struct fsg_buffhd { - void *buf; - enum fsg_buffer_state state; - struct fsg_buffhd *next; - - /* - * The NetChip 2280 is faster, and handles some protocol faults - * better, if we don't submit any short bulk-out read requests. - * So we will record the intended request length here. - */ - unsigned int bulk_out_intended_length; - - struct usb_request *inreq; - int inreq_busy; - struct usb_request *outreq; - int outreq_busy; -}; - -enum fsg_state { - /* This one isn't used anywhere */ - FSG_STATE_COMMAND_PHASE = -10, - FSG_STATE_DATA_PHASE, - FSG_STATE_STATUS_PHASE, - - FSG_STATE_IDLE = 0, - FSG_STATE_ABORT_BULK_OUT, - FSG_STATE_RESET, - FSG_STATE_INTERFACE_CHANGE, - FSG_STATE_CONFIG_CHANGE, - FSG_STATE_DISCONNECT, - FSG_STATE_EXIT, - FSG_STATE_TERMINATED -}; - -enum data_direction { - DATA_DIR_UNKNOWN = 0, - DATA_DIR_FROM_HOST, - DATA_DIR_TO_HOST, - DATA_DIR_NONE -}; - - -/*-------------------------------------------------------------------------*/ - - -static inline u32 get_unaligned_be24(u8 *buf) -{ - return 0xffffff & (u32) get_unaligned_be32(buf - 1); -} - - -/*-------------------------------------------------------------------------*/ - - -enum { - FSG_STRING_INTERFACE -}; - +#include "storage_common.h" /* There is only one interface. */ -static struct usb_interface_descriptor -fsg_intf_desc = { +struct usb_interface_descriptor fsg_intf_desc = { .bLength = sizeof fsg_intf_desc, .bDescriptorType = USB_DT_INTERFACE, @@ -268,14 +43,14 @@ fsg_intf_desc = { .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */ .iInterface = FSG_STRING_INTERFACE, }; +EXPORT_SYMBOL(fsg_intf_desc); /* * Three full-speed endpoint descriptors: bulk-in, bulk-out, and * interrupt-in. */ -static struct usb_endpoint_descriptor -fsg_fs_bulk_in_desc = { +struct usb_endpoint_descriptor fsg_fs_bulk_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -283,9 +58,9 @@ fsg_fs_bulk_in_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, /* wMaxPacketSize set by autoconfiguration */ }; +EXPORT_SYMBOL(fsg_fs_bulk_in_desc); -static struct usb_endpoint_descriptor -fsg_fs_bulk_out_desc = { +struct usb_endpoint_descriptor fsg_fs_bulk_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -293,13 +68,15 @@ fsg_fs_bulk_out_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, /* wMaxPacketSize set by autoconfiguration */ }; +EXPORT_SYMBOL(fsg_fs_bulk_out_desc); -static struct usb_descriptor_header *fsg_fs_function[] = { +struct usb_descriptor_header *fsg_fs_function[] = { (struct usb_descriptor_header *) &fsg_intf_desc, (struct usb_descriptor_header *) &fsg_fs_bulk_in_desc, (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc, NULL, }; +EXPORT_SYMBOL(fsg_fs_function); /* @@ -310,8 +87,7 @@ static struct usb_descriptor_header *fsg_fs_function[] = { * and a "device qualifier" ... plus more construction options * for the configuration descriptor. */ -static struct usb_endpoint_descriptor -fsg_hs_bulk_in_desc = { +struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -319,9 +95,9 @@ fsg_hs_bulk_in_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512), }; +EXPORT_SYMBOL(fsg_hs_bulk_in_desc); -static struct usb_endpoint_descriptor -fsg_hs_bulk_out_desc = { +struct usb_endpoint_descriptor fsg_hs_bulk_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -330,17 +106,18 @@ fsg_hs_bulk_out_desc = { .wMaxPacketSize = cpu_to_le16(512), .bInterval = 1, /* NAK every 1 uframe */ }; +EXPORT_SYMBOL(fsg_hs_bulk_out_desc); -static struct usb_descriptor_header *fsg_hs_function[] = { +struct usb_descriptor_header *fsg_hs_function[] = { (struct usb_descriptor_header *) &fsg_intf_desc, (struct usb_descriptor_header *) &fsg_hs_bulk_in_desc, (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc, NULL, }; +EXPORT_SYMBOL(fsg_hs_function); -static struct usb_endpoint_descriptor -fsg_ss_bulk_in_desc = { +struct usb_endpoint_descriptor fsg_ss_bulk_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -348,16 +125,17 @@ fsg_ss_bulk_in_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; +EXPORT_SYMBOL(fsg_ss_bulk_in_desc); -static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { +struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { .bLength = sizeof(fsg_ss_bulk_in_comp_desc), .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, /*.bMaxBurst = DYNAMIC, */ }; +EXPORT_SYMBOL(fsg_ss_bulk_in_comp_desc); -static struct usb_endpoint_descriptor -fsg_ss_bulk_out_desc = { +struct usb_endpoint_descriptor fsg_ss_bulk_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -365,15 +143,17 @@ fsg_ss_bulk_out_desc = { .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; +EXPORT_SYMBOL(fsg_ss_bulk_out_desc); -static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { +struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { .bLength = sizeof(fsg_ss_bulk_in_comp_desc), .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, /*.bMaxBurst = DYNAMIC, */ }; +EXPORT_SYMBOL(fsg_ss_bulk_out_comp_desc); -static struct usb_descriptor_header *fsg_ss_function[] = { +struct usb_descriptor_header *fsg_ss_function[] = { (struct usb_descriptor_header *) &fsg_intf_desc, (struct usb_descriptor_header *) &fsg_ss_bulk_in_desc, (struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc, @@ -381,17 +161,7 @@ static struct usb_descriptor_header *fsg_ss_function[] = { (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc, NULL, }; - -/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ -static struct usb_string fsg_strings[] = { - {FSG_STRING_INTERFACE, fsg_string_interface}, - {} -}; - -static struct usb_gadget_strings fsg_stringtab = { - .language = 0x0409, /* en-us */ - .strings = fsg_strings, -}; +EXPORT_SYMBOL(fsg_ss_function); /*-------------------------------------------------------------------------*/ @@ -401,7 +171,7 @@ static struct usb_gadget_strings fsg_stringtab = { * the caller must own fsg->filesem for writing. */ -static void fsg_lun_close(struct fsg_lun *curlun) +void fsg_lun_close(struct fsg_lun *curlun) { if (curlun->filp) { LDBG(curlun, "close backing file\n"); @@ -409,9 +179,9 @@ static void fsg_lun_close(struct fsg_lun *curlun) curlun->filp = NULL; } } +EXPORT_SYMBOL(fsg_lun_close); - -static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) +int fsg_lun_open(struct fsg_lun *curlun, const char *filename) { int ro; struct file *filp = NULL; @@ -508,6 +278,7 @@ out: fput(filp); return rc; } +EXPORT_SYMBOL(fsg_lun_open); /*-------------------------------------------------------------------------*/ @@ -516,7 +287,7 @@ out: * Sync the file data, don't bother with the metadata. * This code was copied from fs/buffer.c:sys_fdatasync(). */ -static int fsg_lun_fsync_sub(struct fsg_lun *curlun) +int fsg_lun_fsync_sub(struct fsg_lun *curlun) { struct file *filp = curlun->filp; @@ -524,8 +295,9 @@ static int fsg_lun_fsync_sub(struct fsg_lun *curlun) return 0; return vfs_fsync(filp, 1); } +EXPORT_SYMBOL(fsg_lun_fsync_sub); -static void store_cdrom_address(u8 *dest, int msf, u32 addr) +void store_cdrom_address(u8 *dest, int msf, u32 addr) { if (msf) { /* Convert to Minutes-Seconds-Frames */ @@ -542,34 +314,28 @@ static void store_cdrom_address(u8 *dest, int msf, u32 addr) put_unaligned_be32(addr, dest); } } - +EXPORT_SYMBOL(store_cdrom_address); /*-------------------------------------------------------------------------*/ -static ssize_t ro_show(struct device *dev, struct device_attribute *attr, - char *buf) +ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf) { - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - return sprintf(buf, "%d\n", fsg_lun_is_open(curlun) ? curlun->ro : curlun->initially_ro); } +EXPORT_SYMBOL(fsg_show_ro); -static ssize_t nofua_show(struct device *dev, struct device_attribute *attr, - char *buf) +ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf) { - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - return sprintf(buf, "%u\n", curlun->nofua); } +EXPORT_SYMBOL(fsg_show_nofua); -static ssize_t file_show(struct device *dev, struct device_attribute *attr, - char *buf) +ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, + char *buf) { - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - struct rw_semaphore *filesem = dev_get_drvdata(dev); char *p; ssize_t rc; @@ -591,17 +357,44 @@ static ssize_t file_show(struct device *dev, struct device_attribute *attr, up_read(filesem); return rc; } +EXPORT_SYMBOL(fsg_show_file); +ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf) +{ + return sprintf(buf, "%u\n", curlun->cdrom); +} +EXPORT_SYMBOL(fsg_show_cdrom); -static ssize_t ro_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf) +{ + return sprintf(buf, "%u\n", curlun->removable); +} +EXPORT_SYMBOL(fsg_show_removable); + +/* + * The caller must hold fsg->filesem for reading when calling this function. + */ +static ssize_t _fsg_store_ro(struct fsg_lun *curlun, bool ro) +{ + if (fsg_lun_is_open(curlun)) { + LDBG(curlun, "read-only status change prevented\n"); + return -EBUSY; + } + + curlun->ro = ro; + curlun->initially_ro = ro; + LDBG(curlun, "read-only status set to %d\n", curlun->ro); + + return 0; +} + +ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem, + const char *buf, size_t count) { ssize_t rc; - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - struct rw_semaphore *filesem = dev_get_drvdata(dev); - unsigned ro; + bool ro; - rc = kstrtouint(buf, 2, &ro); + rc = strtobool(buf, &ro); if (rc) return rc; @@ -610,27 +403,21 @@ static ssize_t ro_store(struct device *dev, struct device_attribute *attr, * backing file is closed. */ down_read(filesem); - if (fsg_lun_is_open(curlun)) { - LDBG(curlun, "read-only status change prevented\n"); - rc = -EBUSY; - } else { - curlun->ro = ro; - curlun->initially_ro = ro; - LDBG(curlun, "read-only status set to %d\n", curlun->ro); + rc = _fsg_store_ro(curlun, ro); + if (!rc) rc = count; - } up_read(filesem); + return rc; } +EXPORT_SYMBOL(fsg_store_ro); -static ssize_t nofua_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count) { - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - unsigned nofua; + bool nofua; int ret; - ret = kstrtouint(buf, 2, &nofua); + ret = strtobool(buf, &nofua); if (ret) return ret; @@ -642,12 +429,11 @@ static ssize_t nofua_store(struct device *dev, struct device_attribute *attr, return count; } +EXPORT_SYMBOL(fsg_store_nofua); -static ssize_t file_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, + const char *buf, size_t count) { - struct fsg_lun *curlun = fsg_lun_from_dev(dev); - struct rw_semaphore *filesem = dev_get_drvdata(dev); int rc = 0; if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) { @@ -674,3 +460,45 @@ static ssize_t file_store(struct device *dev, struct device_attribute *attr, up_write(filesem); return (rc < 0 ? rc : count); } +EXPORT_SYMBOL(fsg_store_file); + +ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem, + const char *buf, size_t count) +{ + bool cdrom; + int ret; + + ret = strtobool(buf, &cdrom); + if (ret) + return ret; + + down_read(filesem); + ret = cdrom ? _fsg_store_ro(curlun, true) : 0; + + if (!ret) { + curlun->cdrom = cdrom; + ret = count; + } + up_read(filesem); + + return ret; +} +EXPORT_SYMBOL(fsg_store_cdrom); + +ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf, + size_t count) +{ + bool removable; + int ret; + + ret = strtobool(buf, &removable); + if (ret) + return ret; + + curlun->removable = removable; + + return count; +} +EXPORT_SYMBOL(fsg_store_removable); + +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/storage_common.h b/drivers/usb/gadget/storage_common.h new file mode 100644 index 00000000000..c74c2fdbd56 --- /dev/null +++ b/drivers/usb/gadget/storage_common.h @@ -0,0 +1,229 @@ +#ifndef USB_STORAGE_COMMON_H +#define USB_STORAGE_COMMON_H + +#include <linux/device.h> +#include <linux/usb/storage.h> +#include <scsi/scsi.h> +#include <asm/unaligned.h> + +#ifndef DEBUG +#undef VERBOSE_DEBUG +#undef DUMP_MSGS +#endif /* !DEBUG */ + +#ifdef VERBOSE_DEBUG +#define VLDBG LDBG +#else +#define VLDBG(lun, fmt, args...) do { } while (0) +#endif /* VERBOSE_DEBUG */ + +#define _LMSG(func, lun, fmt, args...) \ + do { \ + if ((lun)->name_pfx && *(lun)->name_pfx) \ + func("%s/%s: " fmt, *(lun)->name_pfx, \ + (lun)->name, ## args); \ + else \ + func("%s: " fmt, (lun)->name, ## args); \ + } while (0) + +#define LDBG(lun, fmt, args...) _LMSG(pr_debug, lun, fmt, ## args) +#define LERROR(lun, fmt, args...) _LMSG(pr_err, lun, fmt, ## args) +#define LWARN(lun, fmt, args...) _LMSG(pr_warn, lun, fmt, ## args) +#define LINFO(lun, fmt, args...) _LMSG(pr_info, lun, fmt, ## args) + + +#ifdef DUMP_MSGS + +# define dump_msg(fsg, /* const char * */ label, \ + /* const u8 * */ buf, /* unsigned */ length) \ +do { \ + if (length < 512) { \ + DBG(fsg, "%s, length %u:\n", label, length); \ + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \ + 16, 1, buf, length, 0); \ + } \ +} while (0) + +# define dump_cdb(fsg) do { } while (0) + +#else + +# define dump_msg(fsg, /* const char * */ label, \ + /* const u8 * */ buf, /* unsigned */ length) do { } while (0) + +# ifdef VERBOSE_DEBUG + +# define dump_cdb(fsg) \ + print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, \ + 16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0) \ + +# else + +# define dump_cdb(fsg) do { } while (0) + +# endif /* VERBOSE_DEBUG */ + +#endif /* DUMP_MSGS */ + +/* Length of a SCSI Command Data Block */ +#define MAX_COMMAND_SIZE 16 + +/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */ +#define SS_NO_SENSE 0 +#define SS_COMMUNICATION_FAILURE 0x040800 +#define SS_INVALID_COMMAND 0x052000 +#define SS_INVALID_FIELD_IN_CDB 0x052400 +#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100 +#define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500 +#define SS_MEDIUM_NOT_PRESENT 0x023a00 +#define SS_MEDIUM_REMOVAL_PREVENTED 0x055302 +#define SS_NOT_READY_TO_READY_TRANSITION 0x062800 +#define SS_RESET_OCCURRED 0x062900 +#define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900 +#define SS_UNRECOVERED_READ_ERROR 0x031100 +#define SS_WRITE_ERROR 0x030c02 +#define SS_WRITE_PROTECTED 0x072700 + +#define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */ +#define ASC(x) ((u8) ((x) >> 8)) +#define ASCQ(x) ((u8) (x)) + +struct fsg_lun { + struct file *filp; + loff_t file_length; + loff_t num_sectors; + + unsigned int initially_ro:1; + unsigned int ro:1; + unsigned int removable:1; + unsigned int cdrom:1; + unsigned int prevent_medium_removal:1; + unsigned int registered:1; + unsigned int info_valid:1; + unsigned int nofua:1; + + u32 sense_data; + u32 sense_data_info; + u32 unit_attention_data; + + unsigned int blkbits; /* Bits of logical block size + of bound block device */ + unsigned int blksize; /* logical block size of bound block device */ + struct device dev; + const char *name; /* "lun.name" */ + const char **name_pfx; /* "function.name" */ +}; + +static inline bool fsg_lun_is_open(struct fsg_lun *curlun) +{ + return curlun->filp != NULL; +} + +/* Big enough to hold our biggest descriptor */ +#define EP0_BUFSIZE 256 +#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ + +/* Default size of buffer length. */ +#define FSG_BUFLEN ((u32)16384) + +/* Maximal number of LUNs supported in mass storage function */ +#define FSG_MAX_LUNS 8 + +enum fsg_buffer_state { + BUF_STATE_EMPTY = 0, + BUF_STATE_FULL, + BUF_STATE_BUSY +}; + +struct fsg_buffhd { + void *buf; + enum fsg_buffer_state state; + struct fsg_buffhd *next; + + /* + * The NetChip 2280 is faster, and handles some protocol faults + * better, if we don't submit any short bulk-out read requests. + * So we will record the intended request length here. + */ + unsigned int bulk_out_intended_length; + + struct usb_request *inreq; + int inreq_busy; + struct usb_request *outreq; + int outreq_busy; +}; + +enum fsg_state { + /* This one isn't used anywhere */ + FSG_STATE_COMMAND_PHASE = -10, + FSG_STATE_DATA_PHASE, + FSG_STATE_STATUS_PHASE, + + FSG_STATE_IDLE = 0, + FSG_STATE_ABORT_BULK_OUT, + FSG_STATE_RESET, + FSG_STATE_INTERFACE_CHANGE, + FSG_STATE_CONFIG_CHANGE, + FSG_STATE_DISCONNECT, + FSG_STATE_EXIT, + FSG_STATE_TERMINATED +}; + +enum data_direction { + DATA_DIR_UNKNOWN = 0, + DATA_DIR_FROM_HOST, + DATA_DIR_TO_HOST, + DATA_DIR_NONE +}; + +static inline u32 get_unaligned_be24(u8 *buf) +{ + return 0xffffff & (u32) get_unaligned_be32(buf - 1); +} + +static inline struct fsg_lun *fsg_lun_from_dev(struct device *dev) +{ + return container_of(dev, struct fsg_lun, dev); +} + +enum { + FSG_STRING_INTERFACE +}; + +extern struct usb_interface_descriptor fsg_intf_desc; + +extern struct usb_endpoint_descriptor fsg_fs_bulk_in_desc; +extern struct usb_endpoint_descriptor fsg_fs_bulk_out_desc; +extern struct usb_descriptor_header *fsg_fs_function[]; + +extern struct usb_endpoint_descriptor fsg_hs_bulk_in_desc; +extern struct usb_endpoint_descriptor fsg_hs_bulk_out_desc; +extern struct usb_descriptor_header *fsg_hs_function[]; + +extern struct usb_endpoint_descriptor fsg_ss_bulk_in_desc; +extern struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc; +extern struct usb_endpoint_descriptor fsg_ss_bulk_out_desc; +extern struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc; +extern struct usb_descriptor_header *fsg_ss_function[]; + +void fsg_lun_close(struct fsg_lun *curlun); +int fsg_lun_open(struct fsg_lun *curlun, const char *filename); +int fsg_lun_fsync_sub(struct fsg_lun *curlun); +void store_cdrom_address(u8 *dest, int msf, u32 addr); +ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf); +ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf); +ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, + char *buf); +ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf); +ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf); +ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem, + const char *buf, size_t count); +ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count); +ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, + const char *buf, size_t count); +ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem, + const char *buf, size_t count); +ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf, + size_t count); + +#endif /* USB_STORAGE_COMMON_H */ diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c index 0ff33396eef..eccea1df702 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.c +++ b/drivers/usb/gadget/tcm_usb_gadget.c @@ -472,7 +472,7 @@ static int usbg_bot_setup(struct usb_function *f, bot_enqueue_cmd_cbw(fu); return 0; break; - }; + } return -ENOTSUPP; } @@ -617,7 +617,7 @@ static void uasp_status_data_cmpl(struct usb_ep *ep, struct usb_request *req) default: BUG(); - }; + } return; cleanup: diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 59891b1c48f..27768a7d986 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -356,7 +356,8 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); return 0; err1: - dev_err(&udc->dev, "failed to start %s: %d\n", + if (ret != -EISNAM) + dev_err(&udc->dev, "failed to start %s: %d\n", udc->driver->function, ret); udc->driver = NULL; udc->dev.driver = NULL; diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 0deb9d6cde2..0dd07ae1555 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -95,6 +95,18 @@ unsigned autoresume = DEFAULT_AUTORESUME; module_param(autoresume, uint, S_IRUGO); MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup"); +/* Maximum Autoresume time */ +unsigned max_autoresume; +module_param(max_autoresume, uint, S_IRUGO); +MODULE_PARM_DESC(max_autoresume, "maximum seconds before remote wakeup"); + +/* Interval between two remote wakeups */ +unsigned autoresume_interval_ms; +module_param(autoresume_interval_ms, uint, S_IRUGO); +MODULE_PARM_DESC(autoresume_interval_ms, + "milliseconds to increase successive wakeup delays"); + +static unsigned autoresume_step_ms; /*-------------------------------------------------------------------------*/ static struct usb_device_descriptor device_desc = { @@ -183,8 +195,16 @@ static void zero_suspend(struct usb_composite_dev *cdev) return; if (autoresume) { - mod_timer(&autoresume_timer, jiffies + (HZ * autoresume)); - DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume); + if (max_autoresume && + (autoresume_step_ms > max_autoresume * 1000)) + autoresume_step_ms = autoresume * 1000; + + mod_timer(&autoresume_timer, jiffies + + msecs_to_jiffies(autoresume_step_ms)); + DBG(cdev, "suspend, wakeup in %d milliseconds\n", + autoresume_step_ms); + + autoresume_step_ms += autoresume_interval_ms; } else DBG(cdev, "%s\n", __func__); } @@ -316,6 +336,7 @@ static int __init zero_bind(struct usb_composite_dev *cdev) if (autoresume) { sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + autoresume_step_ms = autoresume * 1000; } /* support OTG systems */ diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5be0326aae3..a9707da7da0 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -54,7 +54,7 @@ config USB_EHCI_HCD config USB_EHCI_ROOT_HUB_TT bool "Root Hub Transaction Translators" - depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST + depends on USB_EHCI_HCD ---help--- Some EHCI chips have vendor-specific extensions to integrate transaction translators, so that no OHCI or UHCI companion @@ -66,7 +66,7 @@ config USB_EHCI_ROOT_HUB_TT config USB_EHCI_TT_NEWSCHED bool "Improved Transaction Translator scheduling" - depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST + depends on USB_EHCI_HCD default y ---help--- This changes the periodic scheduling code to fill more of the low @@ -203,12 +203,11 @@ config USB_EHCI_SH Enables support for the on-chip EHCI controller on the SuperH. If you use the PCI EHCI controller, this option is not necessary. -config USB_EHCI_S5P +config USB_EHCI_EXYNOS tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" depends on PLAT_S5P || ARCH_EXYNOS help - Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's - on-chip EHCI controller. + Enable support for the Samsung Exynos SOC's on-chip EHCI controller. config USB_EHCI_MV bool "EHCI support for Marvell PXA/MMP USB controller" @@ -224,7 +223,7 @@ config USB_EHCI_MV on-chip EHCI USB controller" for those. config USB_W90X900_EHCI - bool "W90X900(W90P910) EHCI support" + tristate "W90X900(W90P910) EHCI support" depends on ARCH_W90X900 ---help--- Enables support for the W90X900 USB controller @@ -278,7 +277,6 @@ endif # USB_EHCI_HCD config USB_OXU210HP_HCD tristate "OXU210HP HCD support" - depends on GENERIC_HARDIRQS ---help--- The OXU210HP is an USB host/OTG/device controller. Enable this option if your board has this chip. If unsure, say N. @@ -368,14 +366,54 @@ config USB_OHCI_HCD if USB_OHCI_HCD config USB_OHCI_HCD_OMAP1 - bool "OHCI support for OMAP1/2 chips" + tristate "OHCI support for OMAP1/2 chips" depends on ARCH_OMAP1 default y ---help--- Enables support for the OHCI controller on OMAP1/2 chips. +config USB_OHCI_HCD_SPEAR + tristate "Support for ST SPEAr on-chip OHCI USB controller" + depends on USB_OHCI_HCD && PLAT_SPEAR + default y + ---help--- + Enables support for the on-chip OHCI controller on + ST SPEAr chips. + +config USB_OHCI_HCD_S3C2410 + tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" + depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) + default y + ---help--- + Enables support for the on-chip OHCI controller on + S3C24xx/S3C64xx chips. + +config USB_OHCI_HCD_LPC32XX + tristate "Support for LPC on-chip OHCI USB controller" + depends on USB_OHCI_HCD && ARCH_LPC32XX + default y + ---help--- + Enables support for the on-chip OHCI controller on + NXP chips. + +config USB_OHCI_HCD_PXA27X + tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller" + depends on USB_OHCI_HCD && (PXA27x || PXA3xx) + default y + ---help--- + Enables support for the on-chip OHCI controller on + PXA27x/PXA3xx chips. + +config USB_OHCI_HCD_AT91 + tristate "Support for Atmel on-chip OHCI USB controller" + depends on USB_OHCI_HCD && ARCH_AT91 + default y + ---help--- + Enables support for the on-chip OHCI controller on + Atmel chips. + config USB_OHCI_HCD_OMAP3 - bool "OHCI support for OMAP3 and later chips" + tristate "OHCI support for OMAP3 and later chips" depends on (ARCH_OMAP3 || ARCH_OMAP4) default y ---help--- @@ -455,8 +493,8 @@ config USB_OHCI_SH If you use the PCI OHCI controller, this option is not necessary. config USB_OHCI_EXYNOS - boolean "OHCI support for Samsung EXYNOS SoC Series" - depends on ARCH_EXYNOS + tristate "OHCI support for Samsung S5P/EXYNOS SoC Series" + depends on PLAT_S5P || ARCH_EXYNOS help Enable support for the Samsung Exynos SOC's on-chip OHCI controller. diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 50b0041c09a..01e879ef365 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -34,10 +34,11 @@ obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o obj-$(CONFIG_USB_EHCI_HCD_ORION) += ehci-orion.o obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci-spear.o -obj-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o +obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o +obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o @@ -46,6 +47,14 @@ obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_OHCI_HCD_PCI) += ohci-pci.o obj-$(CONFIG_USB_OHCI_HCD_PLATFORM) += ohci-platform.o +obj-$(CONFIG_USB_OHCI_EXYNOS) += ohci-exynos.o +obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o +obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o +obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o +obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o +obj-$(CONFIG_USB_OHCI_HCD_S3C2410) += ohci-s3c2410.o +obj-$(CONFIG_USB_OHCI_HCD_LPC32XX) += ohci-nxp.o +obj-$(CONFIG_USB_OHCI_HCD_PXA27X) += ohci-pxa27x.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_FHCI_HCD) += fhci.o diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c index df13d425e9c..205f4a33658 100644 --- a/drivers/usb/host/bcma-hcd.c +++ b/drivers/usb/host/bcma-hcd.c @@ -227,8 +227,7 @@ static int bcma_hcd_probe(struct bcma_device *dev) /* TODO: Probably need checks here; is the core connected? */ - if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || - dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) + if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32))) return -EOPNOTSUPP; usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL); diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 3b645ff46f7..284f8417eae 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -30,13 +30,17 @@ static const char hcd_name[] = "ehci-atmel"; static struct hc_driver __read_mostly ehci_atmel_hc_driver; /* interface and function clocks */ -static struct clk *iclk, *fclk; +static struct clk *iclk, *fclk, *uclk; static int clocked; /*-------------------------------------------------------------------------*/ static void atmel_start_clock(void) { + if (IS_ENABLED(CONFIG_COMMON_CLK)) { + clk_set_rate(uclk, 48000000); + clk_prepare_enable(uclk); + } clk_prepare_enable(iclk); clk_prepare_enable(fclk); clocked = 1; @@ -46,6 +50,8 @@ static void atmel_stop_clock(void) { clk_disable_unprepare(fclk); clk_disable_unprepare(iclk); + if (IS_ENABLED(CONFIG_COMMON_CLK)) + clk_disable_unprepare(uclk); clocked = 0; } @@ -90,10 +96,9 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (retval) + goto fail_create_hcd; hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { @@ -130,6 +135,14 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) retval = -ENOENT; goto fail_request_resource; } + if (IS_ENABLED(CONFIG_COMMON_CLK)) { + uclk = devm_clk_get(&pdev->dev, "usb_clk"); + if (IS_ERR(uclk)) { + dev_err(&pdev->dev, "failed to get uclk\n"); + retval = PTR_ERR(uclk); + goto fail_request_resource; + } + } ehci = hcd_to_ehci(hcd); /* registers start at offset 0x0 */ diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index aa5b603f393..4a9c2edbcb2 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -334,6 +334,7 @@ static inline void remove_debug_files (struct ehci_hcd *bus) { } /* troubleshooting help: expose state in debugfs */ static int debug_async_open(struct inode *, struct file *); +static int debug_bandwidth_open(struct inode *, struct file *); static int debug_periodic_open(struct inode *, struct file *); static int debug_registers_open(struct inode *, struct file *); @@ -347,6 +348,13 @@ static const struct file_operations debug_async_fops = { .release = debug_close, .llseek = default_llseek, }; +static const struct file_operations debug_bandwidth_fops = { + .owner = THIS_MODULE, + .open = debug_bandwidth_open, + .read = debug_output, + .release = debug_close, + .llseek = default_llseek, +}; static const struct file_operations debug_periodic_fops = { .owner = THIS_MODULE, .open = debug_periodic_open, @@ -379,7 +387,7 @@ struct debug_buffer { case QH_LOW_SPEED: tmp = 'l'; break; \ case QH_HIGH_SPEED: tmp = 'h'; break; \ default: tmp = '?'; break; \ - }; tmp; }) + } tmp; }) static inline char token_mark(struct ehci_hcd *ehci, __hc32 token) { @@ -525,6 +533,89 @@ static ssize_t fill_async_buffer(struct debug_buffer *buf) return strlen(buf->output_buf); } +static ssize_t fill_bandwidth_buffer(struct debug_buffer *buf) +{ + struct ehci_hcd *ehci; + struct ehci_tt *tt; + struct ehci_per_sched *ps; + unsigned temp, size; + char *next; + unsigned i; + u8 *bw; + u16 *bf; + u8 budget[EHCI_BANDWIDTH_SIZE]; + + ehci = hcd_to_ehci(bus_to_hcd(buf->bus)); + next = buf->output_buf; + size = buf->alloc_size; + + *next = 0; + + spin_lock_irq(&ehci->lock); + + /* Dump the HS bandwidth table */ + temp = scnprintf(next, size, + "HS bandwidth allocation (us per microframe)\n"); + size -= temp; + next += temp; + for (i = 0; i < EHCI_BANDWIDTH_SIZE; i += 8) { + bw = &ehci->bandwidth[i]; + temp = scnprintf(next, size, + "%2u: %4u%4u%4u%4u%4u%4u%4u%4u\n", + i, bw[0], bw[1], bw[2], bw[3], + bw[4], bw[5], bw[6], bw[7]); + size -= temp; + next += temp; + } + + /* Dump all the FS/LS tables */ + list_for_each_entry(tt, &ehci->tt_list, tt_list) { + temp = scnprintf(next, size, + "\nTT %s port %d FS/LS bandwidth allocation (us per frame)\n", + dev_name(&tt->usb_tt->hub->dev), + tt->tt_port + !!tt->usb_tt->multi); + size -= temp; + next += temp; + + bf = tt->bandwidth; + temp = scnprintf(next, size, + " %5u%5u%5u%5u%5u%5u%5u%5u\n", + bf[0], bf[1], bf[2], bf[3], + bf[4], bf[5], bf[6], bf[7]); + size -= temp; + next += temp; + + temp = scnprintf(next, size, + "FS/LS budget (us per microframe)\n"); + size -= temp; + next += temp; + compute_tt_budget(budget, tt); + for (i = 0; i < EHCI_BANDWIDTH_SIZE; i += 8) { + bw = &budget[i]; + temp = scnprintf(next, size, + "%2u: %4u%4u%4u%4u%4u%4u%4u%4u\n", + i, bw[0], bw[1], bw[2], bw[3], + bw[4], bw[5], bw[6], bw[7]); + size -= temp; + next += temp; + } + list_for_each_entry(ps, &tt->ps_list, ps_list) { + temp = scnprintf(next, size, + "%s ep %02x: %4u @ %2u.%u+%u mask %04x\n", + dev_name(&ps->udev->dev), + ps->ep->desc.bEndpointAddress, + ps->tt_usecs, + ps->bw_phase, ps->phase_uf, + ps->bw_period, ps->cs_mask); + size -= temp; + next += temp; + } + } + spin_unlock_irq(&ehci->lock); + + return next - buf->output_buf; +} + #define DBG_SCHED_LIMIT 64 static ssize_t fill_periodic_buffer(struct debug_buffer *buf) { @@ -571,7 +662,7 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) case Q_TYPE_QH: hw = p.qh->hw; temp = scnprintf (next, size, " qh%d-%04x/%p", - p.qh->period, + p.qh->ps.period, hc32_to_cpup(ehci, &hw->hw_info2) /* uframe masks */ @@ -618,7 +709,8 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) speed_char (scratch), scratch & 0x007f, (scratch >> 8) & 0x000f, type, - p.qh->usecs, p.qh->c_usecs, + p.qh->ps.usecs, + p.qh->ps.c_usecs, temp, 0x7ff & (scratch >> 16)); @@ -645,7 +737,7 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) case Q_TYPE_SITD: temp = scnprintf (next, size, " sitd%d-%04x/%p", - p.sitd->stream->interval, + p.sitd->stream->ps.period, hc32_to_cpup(ehci, &p.sitd->hw_uframe) & 0x0000ffff, p.sitd); @@ -918,6 +1010,7 @@ static int debug_close(struct inode *inode, struct file *file) return 0; } + static int debug_async_open(struct inode *inode, struct file *file) { file->private_data = alloc_buffer(inode->i_private, fill_async_buffer); @@ -925,6 +1018,14 @@ static int debug_async_open(struct inode *inode, struct file *file) return file->private_data ? 0 : -ENOMEM; } +static int debug_bandwidth_open(struct inode *inode, struct file *file) +{ + file->private_data = alloc_buffer(inode->i_private, + fill_bandwidth_buffer); + + return file->private_data ? 0 : -ENOMEM; +} + static int debug_periodic_open(struct inode *inode, struct file *file) { struct debug_buffer *buf; @@ -957,6 +1058,10 @@ static inline void create_debug_files (struct ehci_hcd *ehci) &debug_async_fops)) goto file_error; + if (!debugfs_create_file("bandwidth", S_IRUGO, ehci->debug_dir, bus, + &debug_bandwidth_fops)) + goto file_error; + if (!debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus, &debug_periodic_fops)) goto file_error; diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-exynos.c index 7c3de95c705..e97c198e052 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-exynos.c @@ -1,5 +1,5 @@ /* - * SAMSUNG S5P USB HOST EHCI Controller + * SAMSUNG EXYNOS USB HOST EHCI Controller * * Copyright (C) 2011 Samsung Electronics Co.Ltd * Author: Jingoo Han <jg1.han@samsung.com> @@ -20,7 +20,6 @@ #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/platform_device.h> -#include <linux/platform_data/usb-ehci-s5p.h> #include <linux/usb/phy.h> #include <linux/usb/samsung_usb_phy.h> #include <linux/usb.h> @@ -29,7 +28,7 @@ #include "ehci.h" -#define DRIVER_DESC "EHCI s5p driver" +#define DRIVER_DESC "EHCI EXYNOS driver" #define EHCI_INSNREG00(base) (base + 0x90) #define EHCI_INSNREG00_ENA_INCR16 (0x1 << 25) @@ -40,21 +39,18 @@ (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \ EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN) -static const char hcd_name[] = "ehci-s5p"; -static struct hc_driver __read_mostly s5p_ehci_hc_driver; +static const char hcd_name[] = "ehci-exynos"; +static struct hc_driver __read_mostly exynos_ehci_hc_driver; -struct s5p_ehci_hcd { +struct exynos_ehci_hcd { struct clk *clk; struct usb_phy *phy; struct usb_otg *otg; - struct s5p_ehci_platdata *pdata; }; -static struct s5p_ehci_platdata empty_platdata; +#define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv) -#define to_s5p_ehci(hcd) (struct s5p_ehci_hcd *)(hcd_to_ehci(hcd)->priv) - -static void s5p_setup_vbus_gpio(struct platform_device *pdev) +static void exynos_setup_vbus_gpio(struct platform_device *pdev) { struct device *dev = &pdev->dev; int err; @@ -73,10 +69,9 @@ static void s5p_setup_vbus_gpio(struct platform_device *pdev) dev_err(dev, "can't request ehci vbus gpio %d", gpio); } -static int s5p_ehci_probe(struct platform_device *pdev) +static int exynos_ehci_probe(struct platform_device *pdev) { - struct s5p_ehci_platdata *pdata = dev_get_platdata(&pdev->dev); - struct s5p_ehci_hcd *s5p_ehci; + struct exynos_ehci_hcd *exynos_ehci; struct usb_hcd *hcd; struct ehci_hcd *ehci; struct resource *res; @@ -89,53 +84,45 @@ static int s5p_ehci_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we move to full device tree support this will vanish off. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (err) + return err; - s5p_setup_vbus_gpio(pdev); + exynos_setup_vbus_gpio(pdev); - hcd = usb_create_hcd(&s5p_ehci_hc_driver, + hcd = usb_create_hcd(&exynos_ehci_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { dev_err(&pdev->dev, "Unable to create HCD\n"); return -ENOMEM; } - s5p_ehci = to_s5p_ehci(hcd); + exynos_ehci = to_exynos_ehci(hcd); if (of_device_is_compatible(pdev->dev.of_node, - "samsung,exynos5440-ehci")) { - s5p_ehci->pdata = &empty_platdata; + "samsung,exynos5440-ehci")) goto skip_phy; - } phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); if (IS_ERR(phy)) { - /* Fallback to pdata */ - if (!pdata) { - usb_put_hcd(hcd); - dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); - return -EPROBE_DEFER; - } else { - s5p_ehci->pdata = pdata; - } + usb_put_hcd(hcd); + dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); + return -EPROBE_DEFER; } else { - s5p_ehci->phy = phy; - s5p_ehci->otg = phy->otg; + exynos_ehci->phy = phy; + exynos_ehci->otg = phy->otg; } skip_phy: - s5p_ehci->clk = devm_clk_get(&pdev->dev, "usbhost"); + exynos_ehci->clk = devm_clk_get(&pdev->dev, "usbhost"); - if (IS_ERR(s5p_ehci->clk)) { + if (IS_ERR(exynos_ehci->clk)) { dev_err(&pdev->dev, "Failed to get usbhost clock\n"); - err = PTR_ERR(s5p_ehci->clk); + err = PTR_ERR(exynos_ehci->clk); goto fail_clk; } - err = clk_prepare_enable(s5p_ehci->clk); + err = clk_prepare_enable(exynos_ehci->clk); if (err) goto fail_clk; @@ -162,13 +149,11 @@ skip_phy: goto fail_io; } - if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); + if (exynos_ehci->otg) + exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (s5p_ehci->phy) - usb_phy_init(s5p_ehci->phy); - else if (s5p_ehci->pdata->phy_init) - s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); + if (exynos_ehci->phy) + usb_phy_init(exynos_ehci->phy); ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; @@ -187,33 +172,29 @@ skip_phy: return 0; fail_add_hcd: - if (s5p_ehci->phy) - usb_phy_shutdown(s5p_ehci->phy); - else if (s5p_ehci->pdata->phy_exit) - s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); + if (exynos_ehci->phy) + usb_phy_shutdown(exynos_ehci->phy); fail_io: - clk_disable_unprepare(s5p_ehci->clk); + clk_disable_unprepare(exynos_ehci->clk); fail_clk: usb_put_hcd(hcd); return err; } -static int s5p_ehci_remove(struct platform_device *pdev) +static int exynos_ehci_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd); + struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); usb_remove_hcd(hcd); - if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); + if (exynos_ehci->otg) + exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (s5p_ehci->phy) - usb_phy_shutdown(s5p_ehci->phy); - else if (s5p_ehci->pdata->phy_exit) - s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); + if (exynos_ehci->phy) + usb_phy_shutdown(exynos_ehci->phy); - clk_disable_unprepare(s5p_ehci->clk); + clk_disable_unprepare(exynos_ehci->clk); usb_put_hcd(hcd); @@ -221,45 +202,39 @@ static int s5p_ehci_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int s5p_ehci_suspend(struct device *dev) +static int exynos_ehci_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd); - struct platform_device *pdev = to_platform_device(dev); + struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); bool do_wakeup = device_may_wakeup(dev); int rc; rc = ehci_suspend(hcd, do_wakeup); - if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); + if (exynos_ehci->otg) + exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (s5p_ehci->phy) - usb_phy_shutdown(s5p_ehci->phy); - else if (s5p_ehci->pdata->phy_exit) - s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); + if (exynos_ehci->phy) + usb_phy_shutdown(exynos_ehci->phy); - clk_disable_unprepare(s5p_ehci->clk); + clk_disable_unprepare(exynos_ehci->clk); return rc; } -static int s5p_ehci_resume(struct device *dev) +static int exynos_ehci_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd); - struct platform_device *pdev = to_platform_device(dev); + struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); - clk_prepare_enable(s5p_ehci->clk); + clk_prepare_enable(exynos_ehci->clk); - if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); + if (exynos_ehci->otg) + exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (s5p_ehci->phy) - usb_phy_init(s5p_ehci->phy); - else if (s5p_ehci->pdata->phy_init) - s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); + if (exynos_ehci->phy) + usb_phy_init(exynos_ehci->phy); /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); @@ -268,13 +243,13 @@ static int s5p_ehci_resume(struct device *dev) return 0; } #else -#define s5p_ehci_suspend NULL -#define s5p_ehci_resume NULL +#define exynos_ehci_suspend NULL +#define exynos_ehci_resume NULL #endif -static const struct dev_pm_ops s5p_ehci_pm_ops = { - .suspend = s5p_ehci_suspend, - .resume = s5p_ehci_resume, +static const struct dev_pm_ops exynos_ehci_pm_ops = { + .suspend = exynos_ehci_suspend, + .resume = exynos_ehci_resume, }; #ifdef CONFIG_OF @@ -286,40 +261,40 @@ static const struct of_device_id exynos_ehci_match[] = { MODULE_DEVICE_TABLE(of, exynos_ehci_match); #endif -static struct platform_driver s5p_ehci_driver = { - .probe = s5p_ehci_probe, - .remove = s5p_ehci_remove, +static struct platform_driver exynos_ehci_driver = { + .probe = exynos_ehci_probe, + .remove = exynos_ehci_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { - .name = "s5p-ehci", + .name = "exynos-ehci", .owner = THIS_MODULE, - .pm = &s5p_ehci_pm_ops, + .pm = &exynos_ehci_pm_ops, .of_match_table = of_match_ptr(exynos_ehci_match), } }; -static const struct ehci_driver_overrides s5p_overrides __initdata = { - .extra_priv_size = sizeof(struct s5p_ehci_hcd), +static const struct ehci_driver_overrides exynos_overrides __initdata = { + .extra_priv_size = sizeof(struct exynos_ehci_hcd), }; -static int __init ehci_s5p_init(void) +static int __init ehci_exynos_init(void) { if (usb_disabled()) return -ENODEV; pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&s5p_ehci_hc_driver, &s5p_overrides); - return platform_driver_register(&s5p_ehci_driver); + ehci_init_driver(&exynos_ehci_hc_driver, &exynos_overrides); + return platform_driver_register(&exynos_ehci_driver); } -module_init(ehci_s5p_init); +module_init(ehci_exynos_init); -static void __exit ehci_s5p_cleanup(void) +static void __exit ehci_exynos_cleanup(void) { - platform_driver_unregister(&s5p_ehci_driver); + platform_driver_unregister(&exynos_ehci_driver); } -module_exit(ehci_s5p_cleanup); +module_exit(ehci_exynos_cleanup); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_ALIAS("platform:s5p-ehci"); +MODULE_ALIAS("platform:exynos-ehci"); MODULE_AUTHOR("Jingoo Han"); MODULE_AUTHOR("Joonyoung Shim"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 947b009009f..a06d5012201 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -57,7 +57,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, pr_debug("initializing FSL-SOC USB Controller\n"); /* Need platform data for setup */ - pdata = (struct fsl_usb2_platform_data *)dev_get_platdata(&pdev->dev); + pdata = dev_get_platdata(&pdev->dev); if (!pdata) { dev_err(&pdev->dev, "No platform data for %s.\n", dev_name(&pdev->dev)); @@ -130,7 +130,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, } /* Enable USB controller, 83xx or 8536 */ - if (pdata->have_sysif_regs) + if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4); /* Don't need to set host mode here. It will be done by tdi_reset() */ @@ -232,15 +232,9 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_ULPI: if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ + clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); setbits32(non_ehci + FSL_SOC_USB_CTRL, - ULPI_PHY_CLK_SEL); - /* - * Due to controller issue of PHY_CLK_VALID in ULPI - * mode, we set USB_CTRL_USB_EN before checking - * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work. - */ - clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, - UTMI_PHY_EN, USB_CTRL_USB_EN); + ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN); } portsc |= PORT_PTS_ULPI; break; @@ -270,8 +264,9 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, if (pdata->have_sysif_regs && pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) { /* check PHY_CLK_VALID to get phy clk valid */ - if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & - PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) { + if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & + PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0) || + in_be32(non_ehci + FSL_SOC_USB_PRICTRL))) { printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n"); return -EINVAL; } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 5d6022f30eb..e8ba4c44223 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -110,6 +110,9 @@ MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); #include "ehci.h" #include "pci-quirks.h" +static void compute_tt_budget(u8 budget_table[EHCI_BANDWIDTH_SIZE], + struct ehci_tt *tt); + /* * The MosChip MCS9990 controller updates its microframe counter * a little before the frame counter, and occasionally we will read @@ -484,6 +487,7 @@ static int ehci_init(struct usb_hcd *hcd) INIT_LIST_HEAD(&ehci->intr_qh_list); INIT_LIST_HEAD(&ehci->cached_itd_list); INIT_LIST_HEAD(&ehci->cached_sitd_list); + INIT_LIST_HEAD(&ehci->tt_list); if (HCC_PGM_FRAMELISTLEN(hcc_params)) { /* periodic schedule size can be smaller than default */ @@ -956,6 +960,7 @@ rescan: goto idle_timeout; /* BUG_ON(!list_empty(&stream->free_list)); */ + reserve_release_iso_bandwidth(ehci, stream, -1); kfree(stream); goto done; } @@ -982,6 +987,8 @@ idle_timeout: if (qh->clearing_tt) goto idle_timeout; if (list_empty (&qh->qtd_list)) { + if (qh->ps.bw_uperiod) + reserve_release_intr_bandwidth(ehci, qh, -1); qh_destroy(ehci, qh); break; } @@ -1022,7 +1029,6 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) * the toggle bit in the QH. */ if (qh) { - usb_settoggle(qh->dev, epnum, is_out, 0); if (!list_empty(&qh->qtd_list)) { WARN_ONCE(1, "clear_halt for a busy endpoint\n"); } else { @@ -1030,6 +1036,7 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) * while the QH is active. Unlink it now; * re-linking will call qh_refresh(). */ + usb_settoggle(qh->ps.udev, epnum, is_out, 0); qh->exception = 1; if (eptype == USB_ENDPOINT_XFER_BULK) start_unlink_async(ehci, qh); @@ -1048,6 +1055,19 @@ static int ehci_get_frame (struct usb_hcd *hcd) /*-------------------------------------------------------------------------*/ +/* Device addition and removal */ + +static void ehci_remove_device(struct usb_hcd *hcd, struct usb_device *udev) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + spin_lock_irq(&ehci->lock); + drop_tt(udev); + spin_unlock_irq(&ehci->lock); +} + +/*-------------------------------------------------------------------------*/ + #ifdef CONFIG_PM /* suspend/resume, section 4.3 */ @@ -1075,6 +1095,14 @@ int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup) clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); spin_unlock_irq(&ehci->lock); + synchronize_irq(hcd->irq); + + /* Check for race with a wakeup request */ + if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) { + ehci_resume(hcd, false); + return -EBUSY; + } + return 0; } EXPORT_SYMBOL_GPL(ehci_suspend); @@ -1191,6 +1219,11 @@ static const struct hc_driver ehci_hc_driver = { .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, + + /* + * device support + */ + .free_dev = ehci_remove_device, }; void ehci_init_driver(struct hc_driver *drv, @@ -1238,11 +1271,6 @@ MODULE_LICENSE ("GPL"); #define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver #endif -#ifdef CONFIG_USB_W90X900_EHCI -#include "ehci-w90x900.c" -#define PLATFORM_DRIVER ehci_hcd_w90x900_driver -#endif - #ifdef CONFIG_USB_OCTEON_EHCI #include "ehci-octeon.c" #define PLATFORM_DRIVER ehci_octeon_driver diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c index 52a77734a22..c0fb6a8ae6a 100644 --- a/drivers/usb/host/ehci-mem.c +++ b/drivers/usb/host/ehci-mem.c @@ -224,11 +224,11 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) hw->hw_next = EHCI_LIST_END(ehci); hw->hw_qtd_next = EHCI_LIST_END(ehci); hw->hw_alt_next = EHCI_LIST_END(ehci); - hw->hw_token &= ~QTD_STS_ACTIVE; ehci->dummy->hw = hw; for (i = 0; i < ehci->periodic_size; i++) - ehci->periodic[i] = ehci->dummy->qh_dma; + ehci->periodic[i] = cpu_to_hc32(ehci, + ehci->dummy->qh_dma); } else { for (i = 0; i < ehci->periodic_size; i++) ehci->periodic[i] = EHCI_LIST_END(ehci); diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 0f717dc688b..f341651d6f6 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -42,7 +42,6 @@ static const char hcd_name[] = "ehci-msm"; static struct hc_driver __read_mostly msm_hc_driver; -static struct usb_phy *phy; static int ehci_msm_reset(struct usb_hcd *hcd) { @@ -70,6 +69,7 @@ static int ehci_msm_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct resource *res; + struct usb_phy *phy; int ret; dev_dbg(&pdev->dev, "ehci_msm proble\n"); @@ -108,10 +108,14 @@ static int ehci_msm_probe(struct platform_device *pdev) * powering up VBUS, mapping of registers address space and power * management. */ - phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); + if (pdev->dev.of_node) + phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); + else + phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); + if (IS_ERR(phy)) { dev_err(&pdev->dev, "unable to find transceiver\n"); - ret = -ENODEV; + ret = -EPROBE_DEFER; goto put_hcd; } @@ -121,6 +125,7 @@ static int ehci_msm_probe(struct platform_device *pdev) goto put_hcd; } + hcd->phy = phy; device_init_wakeup(&pdev->dev, 1); /* * OTG device parent of HCD takes care of putting @@ -147,7 +152,7 @@ static int ehci_msm_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); - otg_set_host(phy->otg, NULL); + otg_set_host(hcd->phy->otg, NULL); /* FIXME: need to call usb_remove_hcd() here? */ @@ -186,12 +191,19 @@ static const struct dev_pm_ops ehci_msm_dev_pm_ops = { .resume = ehci_msm_pm_resume, }; +static struct of_device_id msm_ehci_dt_match[] = { + { .compatible = "qcom,ehci-host", }, + {} +}; +MODULE_DEVICE_TABLE(of, msm_ehci_dt_match); + static struct platform_driver ehci_msm_driver = { .probe = ehci_msm_probe, .remove = ehci_msm_remove, .driver = { .name = "msm_hsusb_host", .pm = &ehci_msm_dev_pm_ops, + .of_match_table = msm_ehci_dt_match, }, }; diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c index ab0397e4d8f..4c528b2c033 100644 --- a/drivers/usb/host/ehci-octeon.c +++ b/drivers/usb/host/ehci-octeon.c @@ -116,8 +116,10 @@ static int ehci_octeon_drv_probe(struct platform_device *pdev) * We can DMA from anywhere. But the descriptors must be in * the lower 4GB. */ - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdev->dev.dma_mask = &ehci_octeon_dma_mask; + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; hcd = usb_create_hcd(&ehci_octeon_hc_driver, &pdev->dev, "octeon"); if (!hcd) diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 78b01fa475b..6fa82d6b766 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -104,7 +104,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) struct resource *res; struct usb_hcd *hcd; void __iomem *regs; - int ret = -ENODEV; + int ret; int irq; int i; struct omap_hcd *omap; @@ -144,11 +144,11 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - if (!dev->coherent_dma_mask) - dev->coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + ret = -ENODEV; hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, dev_name(dev)); if (!hcd) { diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index d1dfb9db5b4..2ba76730e65 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -180,10 +180,9 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) * set. Since shared usb code relies on it, set it here for * now. Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (err) + goto err1; if (!request_mem_region(res->start, resource_size(res), ehci_orion_hc_driver.description)) { diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 6bd299e61f5..3e86bf4371b 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -58,8 +58,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - struct pci_dev *p_smbus; - u8 rev; u32 temp; int retval; @@ -175,22 +173,12 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* SB600 and old version of SB700 have a bug in EHCI controller, * which causes usb devices lose response in some cases. */ - if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) { - p_smbus = pci_get_device(PCI_VENDOR_ID_ATI, - PCI_DEVICE_ID_ATI_SBX00_SMBUS, - NULL); - if (!p_smbus) - break; - rev = p_smbus->revision; - if ((pdev->device == 0x4386) || (rev == 0x3a) - || (rev == 0x3b)) { - u8 tmp; - ehci_info(ehci, "applying AMD SB600/SB700 USB " - "freeze workaround\n"); - pci_read_config_byte(pdev, 0x53, &tmp); - pci_write_config_byte(pdev, 0x53, tmp | (1<<3)); - } - pci_dev_put(p_smbus); + if ((pdev->device == 0x4386 || pdev->device == 0x4396) && + usb_amd_hang_symptom_quirk()) { + u8 tmp; + ehci_info(ehci, "applying AMD SB600/SB700 USB freeze workaround\n"); + pci_read_config_byte(pdev, 0x53, &tmp); + pci_write_config_byte(pdev, 0x53, tmp | (1<<3)); } break; case PCI_VENDOR_ID_NETMOS: @@ -361,7 +349,7 @@ static struct pci_driver ehci_pci_driver = { .remove = usb_hcd_pci_remove, .shutdown = usb_hcd_pci_shutdown, -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM .driver = { .pm = &usb_hcd_pci_pm_ops }, diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index f6b790ca8cf..7f30b7168d5 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -78,7 +78,7 @@ static int ehci_platform_probe(struct platform_device *dev) struct resource *res_mem; struct usb_ehci_pdata *pdata; int irq; - int err = -ENOMEM; + int err; if (usb_disabled()) return -ENODEV; @@ -89,10 +89,10 @@ static int ehci_platform_probe(struct platform_device *dev) */ if (!dev_get_platdata(&dev->dev)) dev->dev.platform_data = &ehci_platform_defaults; - if (!dev->dev.dma_mask) - dev->dev.dma_mask = &dev->dev.coherent_dma_mask; - if (!dev->dev.coherent_dma_mask) - dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); + if (err) + return err; pdata = dev_get_platdata(&dev->dev); diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index 6cc5567bf9c..875d2fcc9e0 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -16,6 +16,8 @@ #include <linux/signal.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index e321804c347..db05bd8ee9d 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -105,9 +105,9 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd) is_out = qh->is_out; epnum = (hc32_to_cpup(ehci, &hw->hw_info1) >> 8) & 0x0f; - if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) { + if (unlikely(!usb_gettoggle(qh->ps.udev, epnum, is_out))) { hw->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE); - usb_settoggle (qh->dev, epnum, is_out, 1); + usb_settoggle(qh->ps.udev, epnum, is_out, 1); } } @@ -797,26 +797,35 @@ qh_make ( * For control/bulk requests, the HC or TT handles these. */ if (type == PIPE_INTERRUPT) { - qh->usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH, + unsigned tmp; + + qh->ps.usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH, is_input, 0, hb_mult(maxp) * max_packet(maxp))); - qh->start = NO_FRAME; + qh->ps.phase = NO_FRAME; if (urb->dev->speed == USB_SPEED_HIGH) { - qh->c_usecs = 0; + qh->ps.c_usecs = 0; qh->gap_uf = 0; - qh->period = urb->interval >> 3; - if (qh->period == 0 && urb->interval != 1) { + if (urb->interval > 1 && urb->interval < 8) { /* NOTE interval 2 or 4 uframes could work. * But interval 1 scheduling is simpler, and * includes high bandwidth. */ urb->interval = 1; - } else if (qh->period > ehci->periodic_size) { - qh->period = ehci->periodic_size; - urb->interval = qh->period << 3; + } else if (urb->interval > ehci->periodic_size << 3) { + urb->interval = ehci->periodic_size << 3; } + qh->ps.period = urb->interval >> 3; + + /* period for bandwidth allocation */ + tmp = min_t(unsigned, EHCI_BANDWIDTH_SIZE, + 1 << (urb->ep->desc.bInterval - 1)); + + /* Allow urb->interval to override */ + qh->ps.bw_uperiod = min_t(unsigned, tmp, urb->interval); + qh->ps.bw_period = qh->ps.bw_uperiod >> 3; } else { int think_time; @@ -826,27 +835,35 @@ qh_make ( /* FIXME this just approximates SPLIT/CSPLIT times */ if (is_input) { // SPLIT, gap, CSPLIT+DATA - qh->c_usecs = qh->usecs + HS_USECS (0); - qh->usecs = HS_USECS (1); + qh->ps.c_usecs = qh->ps.usecs + HS_USECS(0); + qh->ps.usecs = HS_USECS(1); } else { // SPLIT+DATA, gap, CSPLIT - qh->usecs += HS_USECS (1); - qh->c_usecs = HS_USECS (0); + qh->ps.usecs += HS_USECS(1); + qh->ps.c_usecs = HS_USECS(0); } think_time = tt ? tt->think_time : 0; - qh->tt_usecs = NS_TO_US (think_time + + qh->ps.tt_usecs = NS_TO_US(think_time + usb_calc_bus_time (urb->dev->speed, is_input, 0, max_packet (maxp))); - qh->period = urb->interval; - if (qh->period > ehci->periodic_size) { - qh->period = ehci->periodic_size; - urb->interval = qh->period; - } + if (urb->interval > ehci->periodic_size) + urb->interval = ehci->periodic_size; + qh->ps.period = urb->interval; + + /* period for bandwidth allocation */ + tmp = min_t(unsigned, EHCI_BANDWIDTH_FRAMES, + urb->ep->desc.bInterval); + tmp = rounddown_pow_of_two(tmp); + + /* Allow urb->interval to override */ + qh->ps.bw_period = min_t(unsigned, tmp, urb->interval); + qh->ps.bw_uperiod = qh->ps.bw_period << 3; } } /* support for tt scheduling, and access to toggles */ - qh->dev = urb->dev; + qh->ps.udev = urb->dev; + qh->ps.ep = urb->ep; /* using TT? */ switch (urb->dev->speed) { diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 85dd24ed97a..e113fd73aea 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -103,83 +103,210 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr) *hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p)); else - *hw_p = ehci->dummy->qh_dma; + *hw_p = cpu_to_hc32(ehci, ehci->dummy->qh_dma); } -/* how many of the uframe's 125 usecs are allocated? */ -static unsigned short -periodic_usecs (struct ehci_hcd *ehci, unsigned frame, unsigned uframe) +/*-------------------------------------------------------------------------*/ + +/* Bandwidth and TT management */ + +/* Find the TT data structure for this device; create it if necessary */ +static struct ehci_tt *find_tt(struct usb_device *udev) { - __hc32 *hw_p = &ehci->periodic [frame]; - union ehci_shadow *q = &ehci->pshadow [frame]; - unsigned usecs = 0; - struct ehci_qh_hw *hw; - - while (q->ptr) { - switch (hc32_to_cpu(ehci, Q_NEXT_TYPE(ehci, *hw_p))) { - case Q_TYPE_QH: - hw = q->qh->hw; - /* is it in the S-mask? */ - if (hw->hw_info2 & cpu_to_hc32(ehci, 1 << uframe)) - usecs += q->qh->usecs; - /* ... or C-mask? */ - if (hw->hw_info2 & cpu_to_hc32(ehci, - 1 << (8 + uframe))) - usecs += q->qh->c_usecs; - hw_p = &hw->hw_next; - q = &q->qh->qh_next; - break; - // case Q_TYPE_FSTN: - default: - /* for "save place" FSTNs, count the relevant INTR - * bandwidth from the previous frame - */ - if (q->fstn->hw_prev != EHCI_LIST_END(ehci)) { - ehci_dbg (ehci, "ignoring FSTN cost ...\n"); - } - hw_p = &q->fstn->hw_next; - q = &q->fstn->fstn_next; - break; - case Q_TYPE_ITD: - if (q->itd->hw_transaction[uframe]) - usecs += q->itd->stream->usecs; - hw_p = &q->itd->hw_next; - q = &q->itd->itd_next; - break; - case Q_TYPE_SITD: - /* is it in the S-mask? (count SPLIT, DATA) */ - if (q->sitd->hw_uframe & cpu_to_hc32(ehci, - 1 << uframe)) { - if (q->sitd->hw_fullspeed_ep & - cpu_to_hc32(ehci, 1<<31)) - usecs += q->sitd->stream->usecs; - else /* worst case for OUT start-split */ - usecs += HS_USECS_ISO (188); - } + struct usb_tt *utt = udev->tt; + struct ehci_tt *tt, **tt_index, **ptt; + unsigned port; + bool allocated_index = false; + + if (!utt) + return NULL; /* Not below a TT */ + + /* + * Find/create our data structure. + * For hubs with a single TT, we get it directly. + * For hubs with multiple TTs, there's an extra level of pointers. + */ + tt_index = NULL; + if (utt->multi) { + tt_index = utt->hcpriv; + if (!tt_index) { /* Create the index array */ + tt_index = kzalloc(utt->hub->maxchild * + sizeof(*tt_index), GFP_ATOMIC); + if (!tt_index) + return ERR_PTR(-ENOMEM); + utt->hcpriv = tt_index; + allocated_index = true; + } + port = udev->ttport - 1; + ptt = &tt_index[port]; + } else { + port = 0; + ptt = (struct ehci_tt **) &utt->hcpriv; + } + + tt = *ptt; + if (!tt) { /* Create the ehci_tt */ + struct ehci_hcd *ehci = + hcd_to_ehci(bus_to_hcd(udev->bus)); - /* ... C-mask? (count CSPLIT, DATA) */ - if (q->sitd->hw_uframe & - cpu_to_hc32(ehci, 1 << (8 + uframe))) { - /* worst case for IN complete-split */ - usecs += q->sitd->stream->c_usecs; + tt = kzalloc(sizeof(*tt), GFP_ATOMIC); + if (!tt) { + if (allocated_index) { + utt->hcpriv = NULL; + kfree(tt_index); } + return ERR_PTR(-ENOMEM); + } + list_add_tail(&tt->tt_list, &ehci->tt_list); + INIT_LIST_HEAD(&tt->ps_list); + tt->usb_tt = utt; + tt->tt_port = port; + *ptt = tt; + } - hw_p = &q->sitd->hw_next; - q = &q->sitd->sitd_next; - break; + return tt; +} + +/* Release the TT above udev, if it's not in use */ +static void drop_tt(struct usb_device *udev) +{ + struct usb_tt *utt = udev->tt; + struct ehci_tt *tt, **tt_index, **ptt; + int cnt, i; + + if (!utt || !utt->hcpriv) + return; /* Not below a TT, or never allocated */ + + cnt = 0; + if (utt->multi) { + tt_index = utt->hcpriv; + ptt = &tt_index[udev->ttport - 1]; + + /* How many entries are left in tt_index? */ + for (i = 0; i < utt->hub->maxchild; ++i) + cnt += !!tt_index[i]; + } else { + tt_index = NULL; + ptt = (struct ehci_tt **) &utt->hcpriv; + } + + tt = *ptt; + if (!tt || !list_empty(&tt->ps_list)) + return; /* never allocated, or still in use */ + + list_del(&tt->tt_list); + *ptt = NULL; + kfree(tt); + if (cnt == 1) { + utt->hcpriv = NULL; + kfree(tt_index); + } +} + +static void bandwidth_dbg(struct ehci_hcd *ehci, int sign, char *type, + struct ehci_per_sched *ps) +{ + dev_dbg(&ps->udev->dev, + "ep %02x: %s %s @ %u+%u (%u.%u+%u) [%u/%u us] mask %04x\n", + ps->ep->desc.bEndpointAddress, + (sign >= 0 ? "reserve" : "release"), type, + (ps->bw_phase << 3) + ps->phase_uf, ps->bw_uperiod, + ps->phase, ps->phase_uf, ps->period, + ps->usecs, ps->c_usecs, ps->cs_mask); +} + +static void reserve_release_intr_bandwidth(struct ehci_hcd *ehci, + struct ehci_qh *qh, int sign) +{ + unsigned start_uf; + unsigned i, j, m; + int usecs = qh->ps.usecs; + int c_usecs = qh->ps.c_usecs; + int tt_usecs = qh->ps.tt_usecs; + struct ehci_tt *tt; + + if (qh->ps.phase == NO_FRAME) /* Bandwidth wasn't reserved */ + return; + start_uf = qh->ps.bw_phase << 3; + + bandwidth_dbg(ehci, sign, "intr", &qh->ps); + + if (sign < 0) { /* Release bandwidth */ + usecs = -usecs; + c_usecs = -c_usecs; + tt_usecs = -tt_usecs; + } + + /* Entire transaction (high speed) or start-split (full/low speed) */ + for (i = start_uf + qh->ps.phase_uf; i < EHCI_BANDWIDTH_SIZE; + i += qh->ps.bw_uperiod) + ehci->bandwidth[i] += usecs; + + /* Complete-split (full/low speed) */ + if (qh->ps.c_usecs) { + /* NOTE: adjustments needed for FSTN */ + for (i = start_uf; i < EHCI_BANDWIDTH_SIZE; + i += qh->ps.bw_uperiod) { + for ((j = 2, m = 1 << (j+8)); j < 8; (++j, m <<= 1)) { + if (qh->ps.cs_mask & m) + ehci->bandwidth[i+j] += c_usecs; + } } } -#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG) - if (usecs > ehci->uframe_periodic_max) - ehci_err (ehci, "uframe %d sched overrun: %d usecs\n", - frame * 8 + uframe, usecs); -#endif - return usecs; + + /* FS/LS bus bandwidth */ + if (tt_usecs) { + tt = find_tt(qh->ps.udev); + if (sign > 0) + list_add_tail(&qh->ps.ps_list, &tt->ps_list); + else + list_del(&qh->ps.ps_list); + + for (i = start_uf >> 3; i < EHCI_BANDWIDTH_FRAMES; + i += qh->ps.bw_period) + tt->bandwidth[i] += tt_usecs; + } } /*-------------------------------------------------------------------------*/ -static int same_tt (struct usb_device *dev1, struct usb_device *dev2) +static void compute_tt_budget(u8 budget_table[EHCI_BANDWIDTH_SIZE], + struct ehci_tt *tt) +{ + struct ehci_per_sched *ps; + unsigned uframe, uf, x; + u8 *budget_line; + + if (!tt) + return; + memset(budget_table, 0, EHCI_BANDWIDTH_SIZE); + + /* Add up the contributions from all the endpoints using this TT */ + list_for_each_entry(ps, &tt->ps_list, ps_list) { + for (uframe = ps->bw_phase << 3; uframe < EHCI_BANDWIDTH_SIZE; + uframe += ps->bw_uperiod) { + budget_line = &budget_table[uframe]; + x = ps->tt_usecs; + + /* propagate the time forward */ + for (uf = ps->phase_uf; uf < 8; ++uf) { + x += budget_line[uf]; + + /* Each microframe lasts 125 us */ + if (x <= 125) { + budget_line[uf] = x; + break; + } else { + budget_line[uf] = 125; + x -= 125; + } + } + } + } +} + +static int __maybe_unused same_tt(struct usb_device *dev1, + struct usb_device *dev2) { if (!dev1->tt || !dev2->tt) return 0; @@ -227,68 +354,6 @@ static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8]) } } -/* How many of the tt's periodic downstream 1000 usecs are allocated? - * - * While this measures the bandwidth in terms of usecs/uframe, - * the low/fullspeed bus has no notion of uframes, so any particular - * low/fullspeed transfer can "carry over" from one uframe to the next, - * since the TT just performs downstream transfers in sequence. - * - * For example two separate 100 usec transfers can start in the same uframe, - * and the second one would "carry over" 75 usecs into the next uframe. - */ -static void -periodic_tt_usecs ( - struct ehci_hcd *ehci, - struct usb_device *dev, - unsigned frame, - unsigned short tt_usecs[8] -) -{ - __hc32 *hw_p = &ehci->periodic [frame]; - union ehci_shadow *q = &ehci->pshadow [frame]; - unsigned char uf; - - memset(tt_usecs, 0, 16); - - while (q->ptr) { - switch (hc32_to_cpu(ehci, Q_NEXT_TYPE(ehci, *hw_p))) { - case Q_TYPE_ITD: - hw_p = &q->itd->hw_next; - q = &q->itd->itd_next; - continue; - case Q_TYPE_QH: - if (same_tt(dev, q->qh->dev)) { - uf = tt_start_uframe(ehci, q->qh->hw->hw_info2); - tt_usecs[uf] += q->qh->tt_usecs; - } - hw_p = &q->qh->hw->hw_next; - q = &q->qh->qh_next; - continue; - case Q_TYPE_SITD: - if (same_tt(dev, q->sitd->urb->dev)) { - uf = tt_start_uframe(ehci, q->sitd->hw_uframe); - tt_usecs[uf] += q->sitd->stream->tt_usecs; - } - hw_p = &q->sitd->hw_next; - q = &q->sitd->sitd_next; - continue; - // case Q_TYPE_FSTN: - default: - ehci_dbg(ehci, "ignoring periodic frame %d FSTN\n", - frame); - hw_p = &q->fstn->hw_next; - q = &q->fstn->fstn_next; - } - } - - carryover_tt_bandwidth(tt_usecs); - - if (max_tt_usecs[7] < tt_usecs[7]) - ehci_err(ehci, "frame %d tt sched overrun: %d usecs\n", - frame, tt_usecs[7] - max_tt_usecs[7]); -} - /* * Return true if the device's tt's downstream bus is available for a * periodic transfer of the specified length (usecs), starting at the @@ -312,20 +377,29 @@ periodic_tt_usecs ( */ static int tt_available ( struct ehci_hcd *ehci, - unsigned period, - struct usb_device *dev, + struct ehci_per_sched *ps, + struct ehci_tt *tt, unsigned frame, - unsigned uframe, - u16 usecs + unsigned uframe ) { + unsigned period = ps->bw_period; + unsigned usecs = ps->tt_usecs; + if ((period == 0) || (uframe >= 7)) /* error */ return 0; - for (; frame < ehci->periodic_size; frame += period) { - unsigned short tt_usecs[8]; + for (frame &= period - 1; frame < EHCI_BANDWIDTH_FRAMES; + frame += period) { + unsigned i, uf; + unsigned short tt_usecs[8]; - periodic_tt_usecs (ehci, dev, frame, tt_usecs); + if (tt->bandwidth[frame] + usecs > 900) + return 0; + + uf = frame << 3; + for (i = 0; i < 8; (++i, ++uf)) + tt_usecs[i] = ehci->tt_budget[uf]; if (max_tt_usecs[uframe] <= tt_usecs[uframe]) return 0; @@ -337,7 +411,7 @@ static int tt_available ( */ if (125 < usecs) { int ufs = (usecs / 125); - int i; + for (i = uframe; i < (uframe + ufs) && i < 8; i++) if (0 < tt_usecs[i]) return 0; @@ -391,7 +465,7 @@ static int tt_no_collision ( continue; case Q_TYPE_QH: hw = here.qh->hw; - if (same_tt (dev, here.qh->dev)) { + if (same_tt(dev, here.qh->ps.udev)) { u32 mask; mask = hc32_to_cpu(ehci, @@ -471,19 +545,19 @@ static void disable_periodic(struct ehci_hcd *ehci) static void qh_link_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) { unsigned i; - unsigned period = qh->period; + unsigned period = qh->ps.period; - dev_dbg (&qh->dev->dev, + dev_dbg(&qh->ps.udev->dev, "link qh%d-%04x/%p start %d [%d/%d us]\n", period, hc32_to_cpup(ehci, &qh->hw->hw_info2) & (QH_CMASK | QH_SMASK), - qh, qh->start, qh->usecs, qh->c_usecs); + qh, qh->ps.phase, qh->ps.usecs, qh->ps.c_usecs); /* high bandwidth, or otherwise every microframe */ if (period == 0) period = 1; - for (i = qh->start; i < ehci->periodic_size; i += period) { + for (i = qh->ps.phase; i < ehci->periodic_size; i += period) { union ehci_shadow *prev = &ehci->pshadow[i]; __hc32 *hw_p = &ehci->periodic[i]; union ehci_shadow here = *prev; @@ -503,7 +577,7 @@ static void qh_link_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) * enables sharing interior tree nodes */ while (here.ptr && qh != here.qh) { - if (qh->period > here.qh->period) + if (qh->ps.period > here.qh->ps.period) break; prev = &here.qh->qh_next; hw_p = &here.qh->hw->hw_next; @@ -523,10 +597,10 @@ static void qh_link_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) qh->xacterrs = 0; qh->exception = 0; - /* update per-qh bandwidth for usbfs */ - ehci_to_hcd(ehci)->self.bandwidth_allocated += qh->period - ? ((qh->usecs + qh->c_usecs) / qh->period) - : (qh->usecs * 8); + /* update per-qh bandwidth for debugfs */ + ehci_to_hcd(ehci)->self.bandwidth_allocated += qh->ps.bw_period + ? ((qh->ps.usecs + qh->ps.c_usecs) / qh->ps.bw_period) + : (qh->ps.usecs * 8); list_add(&qh->intr_node, &ehci->intr_qh_list); @@ -556,22 +630,21 @@ static void qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) */ /* high bandwidth, or otherwise part of every microframe */ - if ((period = qh->period) == 0) - period = 1; + period = qh->ps.period ? : 1; - for (i = qh->start; i < ehci->periodic_size; i += period) + for (i = qh->ps.phase; i < ehci->periodic_size; i += period) periodic_unlink (ehci, i, qh); - /* update per-qh bandwidth for usbfs */ - ehci_to_hcd(ehci)->self.bandwidth_allocated -= qh->period - ? ((qh->usecs + qh->c_usecs) / qh->period) - : (qh->usecs * 8); + /* update per-qh bandwidth for debugfs */ + ehci_to_hcd(ehci)->self.bandwidth_allocated -= qh->ps.bw_period + ? ((qh->ps.usecs + qh->ps.c_usecs) / qh->ps.bw_period) + : (qh->ps.usecs * 8); - dev_dbg (&qh->dev->dev, + dev_dbg(&qh->ps.udev->dev, "unlink qh%d-%04x/%p start %d [%d/%d us]\n", - qh->period, + qh->ps.period, hc32_to_cpup(ehci, &qh->hw->hw_info2) & (QH_CMASK | QH_SMASK), - qh, qh->start, qh->usecs, qh->c_usecs); + qh, qh->ps.phase, qh->ps.usecs, qh->ps.c_usecs); /* qh->qh_next still "live" to HC */ qh->qh_state = QH_STATE_UNLINK; @@ -694,11 +767,9 @@ static int check_period ( struct ehci_hcd *ehci, unsigned frame, unsigned uframe, - unsigned period, + unsigned uperiod, unsigned usecs ) { - int claimed; - /* complete split running into next frame? * given FSTN support, we could sometimes check... */ @@ -708,25 +779,10 @@ static int check_period ( /* convert "usecs we need" to "max already claimed" */ usecs = ehci->uframe_periodic_max - usecs; - /* we "know" 2 and 4 uframe intervals were rejected; so - * for period 0, check _every_ microframe in the schedule. - */ - if (unlikely (period == 0)) { - do { - for (uframe = 0; uframe < 7; uframe++) { - claimed = periodic_usecs (ehci, frame, uframe); - if (claimed > usecs) - return 0; - } - } while ((frame += 1) < ehci->periodic_size); - - /* just check the specified uframe, at that period */ - } else { - do { - claimed = periodic_usecs (ehci, frame, uframe); - if (claimed > usecs) - return 0; - } while ((frame += period) < ehci->periodic_size); + for (uframe += frame << 3; uframe < EHCI_BANDWIDTH_SIZE; + uframe += uperiod) { + if (ehci->bandwidth[uframe] > usecs) + return 0; } // success! @@ -737,40 +793,40 @@ static int check_intr_schedule ( struct ehci_hcd *ehci, unsigned frame, unsigned uframe, - const struct ehci_qh *qh, - __hc32 *c_maskp + struct ehci_qh *qh, + unsigned *c_maskp, + struct ehci_tt *tt ) { int retval = -ENOSPC; u8 mask = 0; - if (qh->c_usecs && uframe >= 6) /* FSTN territory? */ + if (qh->ps.c_usecs && uframe >= 6) /* FSTN territory? */ goto done; - if (!check_period (ehci, frame, uframe, qh->period, qh->usecs)) + if (!check_period(ehci, frame, uframe, qh->ps.bw_uperiod, qh->ps.usecs)) goto done; - if (!qh->c_usecs) { + if (!qh->ps.c_usecs) { retval = 0; *c_maskp = 0; goto done; } #ifdef CONFIG_USB_EHCI_TT_NEWSCHED - if (tt_available (ehci, qh->period, qh->dev, frame, uframe, - qh->tt_usecs)) { + if (tt_available(ehci, &qh->ps, tt, frame, uframe)) { unsigned i; /* TODO : this may need FSTN for SSPLIT in uframe 5. */ - for (i=uframe+1; i<8 && i<uframe+4; i++) - if (!check_period (ehci, frame, i, - qh->period, qh->c_usecs)) + for (i = uframe+2; i < 8 && i <= uframe+4; i++) + if (!check_period(ehci, frame, i, + qh->ps.bw_uperiod, qh->ps.c_usecs)) goto done; else mask |= 1 << i; retval = 0; - *c_maskp = cpu_to_hc32(ehci, mask << 8); + *c_maskp = mask; } #else /* Make sure this tt's buffer is also available for CSPLITs. @@ -781,15 +837,15 @@ static int check_intr_schedule ( * one smart pass... */ mask = 0x03 << (uframe + qh->gap_uf); - *c_maskp = cpu_to_hc32(ehci, mask << 8); + *c_maskp = mask; mask |= 1 << uframe; - if (tt_no_collision (ehci, qh->period, qh->dev, frame, mask)) { - if (!check_period (ehci, frame, uframe + qh->gap_uf + 1, - qh->period, qh->c_usecs)) + if (tt_no_collision(ehci, qh->ps.bw_period, qh->ps.udev, frame, mask)) { + if (!check_period(ehci, frame, uframe + qh->gap_uf + 1, + qh->ps.bw_uperiod, qh->ps.c_usecs)) goto done; - if (!check_period (ehci, frame, uframe + qh->gap_uf, - qh->period, qh->c_usecs)) + if (!check_period(ehci, frame, uframe + qh->gap_uf, + qh->ps.bw_uperiod, qh->ps.c_usecs)) goto done; retval = 0; } @@ -803,62 +859,67 @@ done: */ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh) { - int status; + int status = 0; unsigned uframe; - __hc32 c_mask; - unsigned frame; /* 0..(qh->period - 1), or NO_FRAME */ + unsigned c_mask; struct ehci_qh_hw *hw = qh->hw; + struct ehci_tt *tt; hw->hw_next = EHCI_LIST_END(ehci); - frame = qh->start; /* reuse the previous schedule slots, if we can */ - if (frame < qh->period) { - uframe = ffs(hc32_to_cpup(ehci, &hw->hw_info2) & QH_SMASK); - status = check_intr_schedule (ehci, frame, --uframe, - qh, &c_mask); - } else { - uframe = 0; - c_mask = 0; - status = -ENOSPC; + if (qh->ps.phase != NO_FRAME) { + ehci_dbg(ehci, "reused qh %p schedule\n", qh); + return 0; + } + + uframe = 0; + c_mask = 0; + tt = find_tt(qh->ps.udev); + if (IS_ERR(tt)) { + status = PTR_ERR(tt); + goto done; } + compute_tt_budget(ehci->tt_budget, tt); /* else scan the schedule to find a group of slots such that all * uframes have enough periodic bandwidth available. */ - if (status) { - /* "normal" case, uframing flexible except with splits */ - if (qh->period) { - int i; - - for (i = qh->period; status && i > 0; --i) { - frame = ++ehci->random_frame % qh->period; - for (uframe = 0; uframe < 8; uframe++) { - status = check_intr_schedule (ehci, - frame, uframe, qh, - &c_mask); - if (status == 0) - break; - } + /* "normal" case, uframing flexible except with splits */ + if (qh->ps.bw_period) { + int i; + unsigned frame; + + for (i = qh->ps.bw_period; i > 0; --i) { + frame = ++ehci->random_frame & (qh->ps.bw_period - 1); + for (uframe = 0; uframe < 8; uframe++) { + status = check_intr_schedule(ehci, + frame, uframe, qh, &c_mask, tt); + if (status == 0) + goto got_it; } - - /* qh->period == 0 means every uframe */ - } else { - frame = 0; - status = check_intr_schedule (ehci, 0, 0, qh, &c_mask); } - if (status) - goto done; - qh->start = frame; - /* reset S-frame and (maybe) C-frame masks */ - hw->hw_info2 &= cpu_to_hc32(ehci, ~(QH_CMASK | QH_SMASK)); - hw->hw_info2 |= qh->period - ? cpu_to_hc32(ehci, 1 << uframe) - : cpu_to_hc32(ehci, QH_SMASK); - hw->hw_info2 |= c_mask; - } else - ehci_dbg (ehci, "reused qh %p schedule\n", qh); + /* qh->ps.bw_period == 0 means every uframe */ + } else { + status = check_intr_schedule(ehci, 0, 0, qh, &c_mask, tt); + } + if (status) + goto done; + + got_it: + qh->ps.phase = (qh->ps.period ? ehci->random_frame & + (qh->ps.period - 1) : 0); + qh->ps.bw_phase = qh->ps.phase & (qh->ps.bw_period - 1); + qh->ps.phase_uf = uframe; + qh->ps.cs_mask = qh->ps.period ? + (c_mask << 8) | (1 << uframe) : + QH_SMASK; + + /* reset S-frame and (maybe) C-frame masks */ + hw->hw_info2 &= cpu_to_hc32(ehci, ~(QH_CMASK | QH_SMASK)); + hw->hw_info2 |= cpu_to_hc32(ehci, qh->ps.cs_mask); + reserve_release_intr_bandwidth(ehci, qh, 1); done: return status; @@ -969,7 +1030,8 @@ iso_stream_alloc (gfp_t mem_flags) if (likely (stream != NULL)) { INIT_LIST_HEAD(&stream->td_list); INIT_LIST_HEAD(&stream->free_list); - stream->next_uframe = -1; + stream->next_uframe = NO_FRAME; + stream->ps.phase = NO_FRAME; } return stream; } @@ -978,25 +1040,24 @@ static void iso_stream_init ( struct ehci_hcd *ehci, struct ehci_iso_stream *stream, - struct usb_device *dev, - int pipe, - unsigned interval + struct urb *urb ) { static const u8 smask_out [] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f }; + struct usb_device *dev = urb->dev; u32 buf1; unsigned epnum, maxp; int is_input; - long bandwidth; + unsigned tmp; /* * this might be a "high bandwidth" highspeed endpoint, * as encoded in the ep descriptor's wMaxPacket field */ - epnum = usb_pipeendpoint (pipe); - is_input = usb_pipein (pipe) ? USB_DIR_IN : 0; - maxp = usb_maxpacket(dev, pipe, !is_input); + epnum = usb_pipeendpoint(urb->pipe); + is_input = usb_pipein(urb->pipe) ? USB_DIR_IN : 0; + maxp = usb_endpoint_maxp(&urb->ep->desc); if (is_input) { buf1 = (1 << 11); } else { @@ -1020,9 +1081,19 @@ iso_stream_init ( /* usbfs wants to report the average usecs per frame tied up * when transfers on this endpoint are scheduled ... */ - stream->usecs = HS_USECS_ISO (maxp); - bandwidth = stream->usecs * 8; - bandwidth /= interval; + stream->ps.usecs = HS_USECS_ISO(maxp); + + /* period for bandwidth allocation */ + tmp = min_t(unsigned, EHCI_BANDWIDTH_SIZE, + 1 << (urb->ep->desc.bInterval - 1)); + + /* Allow urb->interval to override */ + stream->ps.bw_uperiod = min_t(unsigned, tmp, urb->interval); + + stream->uperiod = urb->interval; + stream->ps.period = urb->interval >> 3; + stream->bandwidth = stream->ps.usecs * 8 / + stream->ps.bw_uperiod; } else { u32 addr; @@ -1036,36 +1107,46 @@ iso_stream_init ( addr |= dev->tt->hub->devnum << 16; addr |= epnum << 8; addr |= dev->devnum; - stream->usecs = HS_USECS_ISO (maxp); + stream->ps.usecs = HS_USECS_ISO(maxp); think_time = dev->tt ? dev->tt->think_time : 0; - stream->tt_usecs = NS_TO_US (think_time + usb_calc_bus_time ( + stream->ps.tt_usecs = NS_TO_US(think_time + usb_calc_bus_time( dev->speed, is_input, 1, maxp)); hs_transfers = max (1u, (maxp + 187) / 188); if (is_input) { u32 tmp; addr |= 1 << 31; - stream->c_usecs = stream->usecs; - stream->usecs = HS_USECS_ISO (1); - stream->raw_mask = 1; + stream->ps.c_usecs = stream->ps.usecs; + stream->ps.usecs = HS_USECS_ISO(1); + stream->ps.cs_mask = 1; /* c-mask as specified in USB 2.0 11.18.4 3.c */ tmp = (1 << (hs_transfers + 2)) - 1; - stream->raw_mask |= tmp << (8 + 2); + stream->ps.cs_mask |= tmp << (8 + 2); } else - stream->raw_mask = smask_out [hs_transfers - 1]; - bandwidth = stream->usecs + stream->c_usecs; - bandwidth /= interval << 3; + stream->ps.cs_mask = smask_out[hs_transfers - 1]; + + /* period for bandwidth allocation */ + tmp = min_t(unsigned, EHCI_BANDWIDTH_FRAMES, + 1 << (urb->ep->desc.bInterval - 1)); + + /* Allow urb->interval to override */ + stream->ps.bw_period = min_t(unsigned, tmp, urb->interval); + stream->ps.bw_uperiod = stream->ps.bw_period << 3; - /* stream->splits gets created from raw_mask later */ + stream->ps.period = urb->interval; + stream->uperiod = urb->interval << 3; + stream->bandwidth = (stream->ps.usecs + stream->ps.c_usecs) / + stream->ps.bw_period; + + /* stream->splits gets created from cs_mask later */ stream->address = cpu_to_hc32(ehci, addr); } - stream->bandwidth = bandwidth; - stream->udev = dev; + stream->ps.udev = dev; + stream->ps.ep = urb->ep; stream->bEndpointAddress = is_input | epnum; - stream->interval = interval; stream->maxp = maxp; } @@ -1090,9 +1171,7 @@ iso_stream_find (struct ehci_hcd *ehci, struct urb *urb) stream = iso_stream_alloc(GFP_ATOMIC); if (likely (stream != NULL)) { ep->hcpriv = stream; - stream->ep = ep; - iso_stream_init(ehci, stream, urb->dev, urb->pipe, - urb->interval); + iso_stream_init(ehci, stream, urb); } /* if dev->ep [epnum] is a QH, hw is set */ @@ -1137,7 +1216,7 @@ itd_sched_init( dma_addr_t dma = urb->transfer_dma; /* how many uframes are needed for these transfers */ - iso_sched->span = urb->number_of_packets * stream->interval; + iso_sched->span = urb->number_of_packets * stream->uperiod; /* figure out per-uframe itd fields that we'll need later * when we fit new itds into the schedule. @@ -1236,7 +1315,7 @@ itd_urb_transaction ( memset (itd, 0, sizeof *itd); itd->itd_dma = itd_dma; - itd->frame = 9999; /* an invalid value */ + itd->frame = NO_FRAME; list_add (&itd->itd_list, &sched->td_list); } spin_unlock_irqrestore (&ehci->lock, flags); @@ -1249,49 +1328,106 @@ itd_urb_transaction ( /*-------------------------------------------------------------------------*/ +static void reserve_release_iso_bandwidth(struct ehci_hcd *ehci, + struct ehci_iso_stream *stream, int sign) +{ + unsigned uframe; + unsigned i, j; + unsigned s_mask, c_mask, m; + int usecs = stream->ps.usecs; + int c_usecs = stream->ps.c_usecs; + int tt_usecs = stream->ps.tt_usecs; + struct ehci_tt *tt; + + if (stream->ps.phase == NO_FRAME) /* Bandwidth wasn't reserved */ + return; + uframe = stream->ps.bw_phase << 3; + + bandwidth_dbg(ehci, sign, "iso", &stream->ps); + + if (sign < 0) { /* Release bandwidth */ + usecs = -usecs; + c_usecs = -c_usecs; + tt_usecs = -tt_usecs; + } + + if (!stream->splits) { /* High speed */ + for (i = uframe + stream->ps.phase_uf; i < EHCI_BANDWIDTH_SIZE; + i += stream->ps.bw_uperiod) + ehci->bandwidth[i] += usecs; + + } else { /* Full speed */ + s_mask = stream->ps.cs_mask; + c_mask = s_mask >> 8; + + /* NOTE: adjustment needed for frame overflow */ + for (i = uframe; i < EHCI_BANDWIDTH_SIZE; + i += stream->ps.bw_uperiod) { + for ((j = stream->ps.phase_uf, m = 1 << j); j < 8; + (++j, m <<= 1)) { + if (s_mask & m) + ehci->bandwidth[i+j] += usecs; + else if (c_mask & m) + ehci->bandwidth[i+j] += c_usecs; + } + } + + tt = find_tt(stream->ps.udev); + if (sign > 0) + list_add_tail(&stream->ps.ps_list, &tt->ps_list); + else + list_del(&stream->ps.ps_list); + + for (i = uframe >> 3; i < EHCI_BANDWIDTH_FRAMES; + i += stream->ps.bw_period) + tt->bandwidth[i] += tt_usecs; + } +} + static inline int itd_slot_ok ( struct ehci_hcd *ehci, - u32 mod, - u32 uframe, - u8 usecs, - u32 period + struct ehci_iso_stream *stream, + unsigned uframe ) { - uframe %= period; - do { - /* can't commit more than uframe_periodic_max usec */ - if (periodic_usecs (ehci, uframe >> 3, uframe & 0x7) - > (ehci->uframe_periodic_max - usecs)) - return 0; + unsigned usecs; + + /* convert "usecs we need" to "max already claimed" */ + usecs = ehci->uframe_periodic_max - stream->ps.usecs; - /* we know urb->interval is 2^N uframes */ - uframe += period; - } while (uframe < mod); + for (uframe &= stream->ps.bw_uperiod - 1; uframe < EHCI_BANDWIDTH_SIZE; + uframe += stream->ps.bw_uperiod) { + if (ehci->bandwidth[uframe] > usecs) + return 0; + } return 1; } static inline int sitd_slot_ok ( struct ehci_hcd *ehci, - u32 mod, struct ehci_iso_stream *stream, - u32 uframe, + unsigned uframe, struct ehci_iso_sched *sched, - u32 period_uframes + struct ehci_tt *tt ) { - u32 mask, tmp; - u32 frame, uf; + unsigned mask, tmp; + unsigned frame, uf; + + mask = stream->ps.cs_mask << (uframe & 7); - mask = stream->raw_mask << (uframe & 7); + /* for OUT, don't wrap SSPLIT into H-microframe 7 */ + if (((stream->ps.cs_mask & 0xff) << (uframe & 7)) >= (1 << 7)) + return 0; /* for IN, don't wrap CSPLIT into the next frame */ if (mask & ~0xffff) return 0; /* check bandwidth */ - uframe %= period_uframes; + uframe &= stream->ps.bw_uperiod - 1; frame = uframe >> 3; #ifdef CONFIG_USB_EHCI_TT_NEWSCHED @@ -1299,54 +1435,48 @@ sitd_slot_ok ( * tt_available scheduling guarantees 10+% for control/bulk. */ uf = uframe & 7; - if (!tt_available(ehci, period_uframes >> 3, - stream->udev, frame, uf, stream->tt_usecs)) + if (!tt_available(ehci, &stream->ps, tt, frame, uf)) return 0; #else /* tt must be idle for start(s), any gap, and csplit. * assume scheduling slop leaves 10+% for control/bulk. */ - if (!tt_no_collision(ehci, period_uframes >> 3, - stream->udev, frame, mask)) + if (!tt_no_collision(ehci, stream->ps.bw_period, + stream->ps.udev, frame, mask)) return 0; #endif - /* this multi-pass logic is simple, but performance may - * suffer when the schedule data isn't cached. - */ do { - u32 max_used; - - frame = uframe >> 3; - uf = uframe & 7; + unsigned max_used; + unsigned i; /* check starts (OUT uses more than one) */ - max_used = ehci->uframe_periodic_max - stream->usecs; - for (tmp = stream->raw_mask & 0xff; tmp; tmp >>= 1, uf++) { - if (periodic_usecs (ehci, frame, uf) > max_used) + uf = uframe; + max_used = ehci->uframe_periodic_max - stream->ps.usecs; + for (tmp = stream->ps.cs_mask & 0xff; tmp; tmp >>= 1, uf++) { + if (ehci->bandwidth[uf] > max_used) return 0; } /* for IN, check CSPLIT */ - if (stream->c_usecs) { - uf = uframe & 7; - max_used = ehci->uframe_periodic_max - stream->c_usecs; - do { - tmp = 1 << uf; - tmp <<= 8; - if ((stream->raw_mask & tmp) == 0) + if (stream->ps.c_usecs) { + max_used = ehci->uframe_periodic_max - + stream->ps.c_usecs; + uf = uframe & ~7; + tmp = 1 << (2+8); + for (i = (uframe & 7) + 2; i < 8; (++i, tmp <<= 1)) { + if ((stream->ps.cs_mask & tmp) == 0) continue; - if (periodic_usecs (ehci, frame, uf) - > max_used) + if (ehci->bandwidth[uf+i] > max_used) return 0; - } while (++uf < 8); + } } - /* we know urb->interval is 2^N uframes */ - uframe += period_uframes; - } while (uframe < mod); + uframe += stream->ps.bw_uperiod; + } while (uframe < EHCI_BANDWIDTH_SIZE); - stream->splits = cpu_to_hc32(ehci, stream->raw_mask << (uframe & 7)); + stream->ps.cs_mask <<= uframe & 7; + stream->splits = cpu_to_hc32(ehci, stream->ps.cs_mask); return 1; } @@ -1361,8 +1491,6 @@ sitd_slot_ok ( * given EHCI_TUNE_FLS and the slop). Or, write a smarter scheduler! */ -#define SCHEDULING_DELAY 40 /* microframes */ - static int iso_stream_schedule ( struct ehci_hcd *ehci, @@ -1370,134 +1498,184 @@ iso_stream_schedule ( struct ehci_iso_stream *stream ) { - u32 now, base, next, start, period, span; - int status; + u32 now, base, next, start, period, span, now2; + u32 wrap = 0, skip = 0; + int status = 0; unsigned mod = ehci->periodic_size << 3; struct ehci_iso_sched *sched = urb->hcpriv; + bool empty = list_empty(&stream->td_list); + bool new_stream = false; - period = urb->interval; + period = stream->uperiod; span = sched->span; - if (!stream->highspeed) { - period <<= 3; + if (!stream->highspeed) span <<= 3; - } - now = ehci_read_frame_index(ehci) & (mod - 1); + /* Start a new isochronous stream? */ + if (unlikely(empty && !hcd_periodic_completion_in_progress( + ehci_to_hcd(ehci), urb->ep))) { - /* Typical case: reuse current schedule, stream is still active. - * Hopefully there are no gaps from the host falling behind - * (irq delays etc). If there are, the behavior depends on - * whether URB_ISO_ASAP is set. - */ - if (likely (!list_empty (&stream->td_list))) { + /* Schedule the endpoint */ + if (stream->ps.phase == NO_FRAME) { + int done = 0; + struct ehci_tt *tt = find_tt(stream->ps.udev); - /* Take the isochronous scheduling threshold into account */ - if (ehci->i_thresh) - next = now + ehci->i_thresh; /* uframe cache */ - else - next = (now + 2 + 7) & ~0x07; /* full frame cache */ - - /* - * Use ehci->last_iso_frame as the base. There can't be any - * TDs scheduled for earlier than that. - */ - base = ehci->last_iso_frame << 3; - next = (next - base) & (mod - 1); - start = (stream->next_uframe - base) & (mod - 1); - - /* Is the schedule already full? */ - if (unlikely(start < period)) { - ehci_dbg(ehci, "iso sched full %p (%u-%u < %u mod %u)\n", - urb, stream->next_uframe, base, - period, mod); - status = -ENOSPC; - goto fail; - } - - /* Behind the scheduling threshold? */ - if (unlikely(start < next)) { - unsigned now2 = (now - base) & (mod - 1); + if (IS_ERR(tt)) { + status = PTR_ERR(tt); + goto fail; + } + compute_tt_budget(ehci->tt_budget, tt); - /* USB_ISO_ASAP: Round up to the first available slot */ - if (urb->transfer_flags & URB_ISO_ASAP) - start += (next - start + period - 1) & -period; + start = ((-(++ehci->random_frame)) << 3) & (period - 1); - /* - * Not ASAP: Use the next slot in the stream, - * no matter what. + /* find a uframe slot with enough bandwidth. + * Early uframes are more precious because full-speed + * iso IN transfers can't use late uframes, + * and therefore they should be allocated last. */ - else if (start + span - period < now2) { - ehci_dbg(ehci, "iso underrun %p (%u+%u < %u)\n", - urb, start + base, - span - period, now2 + base); + next = start; + start += period; + do { + start--; + /* check schedule: enough space? */ + if (stream->highspeed) { + if (itd_slot_ok(ehci, stream, start)) + done = 1; + } else { + if ((start % 8) >= 6) + continue; + if (sitd_slot_ok(ehci, stream, start, + sched, tt)) + done = 1; + } + } while (start > next && !done); + + /* no room in the schedule */ + if (!done) { + ehci_dbg(ehci, "iso sched full %p", urb); + status = -ENOSPC; + goto fail; } + stream->ps.phase = (start >> 3) & + (stream->ps.period - 1); + stream->ps.bw_phase = stream->ps.phase & + (stream->ps.bw_period - 1); + stream->ps.phase_uf = start & 7; + reserve_release_iso_bandwidth(ehci, stream, 1); + } + + /* New stream is already scheduled; use the upcoming slot */ + else { + start = (stream->ps.phase << 3) + stream->ps.phase_uf; } - start += base; + stream->next_uframe = start; + new_stream = true; } - /* need to schedule; when's the next (u)frame we could start? - * this is bigger than ehci->i_thresh allows; scheduling itself - * isn't free, the delay should handle reasonably slow cpus. it - * can also help high bandwidth if the dma and irq loads don't - * jump until after the queue is primed. + now = ehci_read_frame_index(ehci) & (mod - 1); + + /* Take the isochronous scheduling threshold into account */ + if (ehci->i_thresh) + next = now + ehci->i_thresh; /* uframe cache */ + else + next = (now + 2 + 7) & ~0x07; /* full frame cache */ + + /* + * Use ehci->last_iso_frame as the base. There can't be any + * TDs scheduled for earlier than that. */ - else { - int done = 0; + base = ehci->last_iso_frame << 3; + next = (next - base) & (mod - 1); + start = (stream->next_uframe - base) & (mod - 1); - base = now & ~0x07; - start = base + SCHEDULING_DELAY; + if (unlikely(new_stream)) + goto do_ASAP; - /* find a uframe slot with enough bandwidth. - * Early uframes are more precious because full-speed - * iso IN transfers can't use late uframes, - * and therefore they should be allocated last. - */ - next = start; - start += period; - do { - start--; - /* check schedule: enough space? */ - if (stream->highspeed) { - if (itd_slot_ok(ehci, mod, start, - stream->usecs, period)) - done = 1; - } else { - if ((start % 8) >= 6) - continue; - if (sitd_slot_ok(ehci, mod, stream, - start, sched, period)) - done = 1; - } - } while (start > next && !done); + /* + * Typical case: reuse current schedule, stream may still be active. + * Hopefully there are no gaps from the host falling behind + * (irq delays etc). If there are, the behavior depends on + * whether URB_ISO_ASAP is set. + */ + now2 = (now - base) & (mod - 1); + + /* Is the schedule already full? */ + if (unlikely(!empty && start < period)) { + ehci_dbg(ehci, "iso sched full %p (%u-%u < %u mod %u)\n", + urb, stream->next_uframe, base, period, mod); + status = -ENOSPC; + goto fail; + } + + /* Is the next packet scheduled after the base time? */ + if (likely(!empty || start <= now2 + period)) { + + /* URB_ISO_ASAP: make sure that start >= next */ + if (unlikely(start < next && + (urb->transfer_flags & URB_ISO_ASAP))) + goto do_ASAP; + + /* Otherwise use start, if it's not in the past */ + if (likely(start >= now2)) + goto use_start; - /* no room in the schedule */ - if (!done) { - ehci_dbg(ehci, "iso sched full %p", urb); - status = -ENOSPC; - goto fail; + /* Otherwise we got an underrun while the queue was empty */ + } else { + if (urb->transfer_flags & URB_ISO_ASAP) + goto do_ASAP; + wrap = mod; + now2 += mod; + } + + /* How many uframes and packets do we need to skip? */ + skip = (now2 - start + period - 1) & -period; + if (skip >= span) { /* Entirely in the past? */ + ehci_dbg(ehci, "iso underrun %p (%u+%u < %u) [%u]\n", + urb, start + base, span - period, now2 + base, + base); + + /* Try to keep the last TD intact for scanning later */ + skip = span - period; + + /* Will it come before the current scan position? */ + if (empty) { + skip = span; /* Skip the entire URB */ + status = 1; /* and give it back immediately */ + iso_sched_free(stream, sched); + sched = NULL; } } + urb->error_count = skip / period; + if (sched) + sched->first_packet = urb->error_count; + goto use_start; + do_ASAP: + /* Use the first slot after "next" */ + start = next + ((start - next) & (period - 1)); + + use_start: /* Tried to schedule too far into the future? */ - if (unlikely(start - base + span - period >= mod)) { + if (unlikely(start + span - period >= mod + wrap)) { ehci_dbg(ehci, "request %p would overflow (%u+%u >= %u)\n", - urb, start - base, span - period, mod); + urb, start, span - period, mod + wrap); status = -EFBIG; goto fail; } - stream->next_uframe = start & (mod - 1); + start += base; + stream->next_uframe = (start + skip) & (mod - 1); /* report high speed start in uframes; full speed, in frames */ - urb->start_frame = stream->next_uframe; + urb->start_frame = start & (mod - 1); if (!stream->highspeed) urb->start_frame >>= 3; /* Make sure scan_isoc() sees these */ if (ehci->isoc_count == 0) ehci->last_iso_frame = now >> 3; - return 0; + return status; fail: iso_sched_free(stream, sched); @@ -1610,7 +1788,8 @@ static void itd_link_urb( ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++; /* fill iTDs uframe by uframe */ - for (packet = 0, itd = NULL; packet < urb->number_of_packets; ) { + for (packet = iso_sched->first_packet, itd = NULL; + packet < urb->number_of_packets;) { if (itd == NULL) { /* ASSERT: we have all necessary itds */ // BUG_ON (list_empty (&iso_sched->td_list)); @@ -1630,7 +1809,7 @@ static void itd_link_urb( itd_patch(ehci, itd, iso_sched, packet, uframe); - next_uframe += stream->interval; + next_uframe += stream->uperiod; next_uframe &= mod - 1; packet++; @@ -1770,9 +1949,9 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, ehci_dbg (ehci, "can't get iso stream\n"); return -ENOMEM; } - if (unlikely (urb->interval != stream->interval)) { + if (unlikely(urb->interval != stream->uperiod)) { ehci_dbg (ehci, "can't change iso interval %d --> %d\n", - stream->interval, urb->interval); + stream->uperiod, urb->interval); goto done; } @@ -1804,10 +1983,14 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, if (unlikely(status)) goto done_not_linked; status = iso_stream_schedule(ehci, urb, stream); - if (likely (status == 0)) + if (likely(status == 0)) { itd_link_urb (ehci, urb, ehci->periodic_size << 3, stream); - else + } else if (status > 0) { + status = 0; + ehci_urb_done(ehci, urb, 0); + } else { usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb); + } done_not_linked: spin_unlock_irqrestore (&ehci->lock, flags); done: @@ -1833,7 +2016,7 @@ sitd_sched_init( dma_addr_t dma = urb->transfer_dma; /* how many frames are needed for these transfers */ - iso_sched->span = urb->number_of_packets * stream->interval; + iso_sched->span = urb->number_of_packets * stream->ps.period; /* figure out per-frame sitd fields that we'll need later * when we fit new sitds into the schedule. @@ -1925,7 +2108,7 @@ sitd_urb_transaction ( memset (sitd, 0, sizeof *sitd); sitd->sitd_dma = sitd_dma; - sitd->frame = 9999; /* an invalid value */ + sitd->frame = NO_FRAME; list_add (&sitd->sitd_list, &iso_sched->td_list); } @@ -2008,7 +2191,7 @@ static void sitd_link_urb( ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++; /* fill sITDs frame by frame */ - for (packet = 0, sitd = NULL; + for (packet = sched->first_packet, sitd = NULL; packet < urb->number_of_packets; packet++) { @@ -2027,7 +2210,7 @@ static void sitd_link_urb( sitd_link(ehci, (next_uframe >> 3) & (ehci->periodic_size - 1), sitd); - next_uframe += stream->interval << 3; + next_uframe += stream->uperiod; } stream->next_uframe = next_uframe & (mod - 1); @@ -2146,9 +2329,9 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb, ehci_dbg (ehci, "can't get iso stream\n"); return -ENOMEM; } - if (urb->interval != stream->interval) { + if (urb->interval != stream->ps.period) { ehci_dbg (ehci, "can't change iso interval %d --> %d\n", - stream->interval, urb->interval); + stream->ps.period, urb->interval); goto done; } @@ -2178,10 +2361,14 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb, if (unlikely(status)) goto done_not_linked; status = iso_stream_schedule(ehci, urb, stream); - if (status == 0) + if (likely(status == 0)) { sitd_link_urb (ehci, urb, ehci->periodic_size << 3, stream); - else + } else if (status > 0) { + status = 0; + ehci_urb_done(ehci, urb, 0); + } else { usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb); + } done_not_linked: spin_unlock_irqrestore (&ehci->lock, flags); done: @@ -2259,7 +2446,8 @@ restart: q.itd->hw_next != EHCI_LIST_END(ehci)) *hw_p = q.itd->hw_next; else - *hw_p = ehci->dummy->qh_dma; + *hw_p = cpu_to_hc32(ehci, + ehci->dummy->qh_dma); type = Q_NEXT_TYPE(ehci, q.itd->hw_next); wmb(); modified = itd_complete (ehci, q.itd); @@ -2294,7 +2482,8 @@ restart: q.sitd->hw_next != EHCI_LIST_END(ehci)) *hw_p = q.sitd->hw_next; else - *hw_p = ehci->dummy->qh_dma; + *hw_p = cpu_to_hc32(ehci, + ehci->dummy->qh_dma); type = Q_NEXT_TYPE(ehci, q.sitd->hw_next); wmb(); modified = sitd_complete (ehci, q.sitd); diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 1cf0adba3fc..ee6f9ffaa0e 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -81,10 +81,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (retval) + goto fail; usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { diff --git a/drivers/usb/host/ehci-sysfs.c b/drivers/usb/host/ehci-sysfs.c index 14ced00ba22..f6459dfb6f5 100644 --- a/drivers/usb/host/ehci-sysfs.c +++ b/drivers/usb/host/ehci-sysfs.c @@ -97,8 +97,7 @@ static ssize_t store_uframe_periodic_max(struct device *dev, { struct ehci_hcd *ehci; unsigned uframe_periodic_max; - unsigned frame, uframe; - unsigned short allocated_max; + unsigned uframe; unsigned long flags; ssize_t ret; @@ -122,16 +121,14 @@ static ssize_t store_uframe_periodic_max(struct device *dev, /* * for request to decrease max periodic bandwidth, we have to check - * every microframe in the schedule to see whether the decrease is - * possible. + * to see whether the decrease is possible. */ if (uframe_periodic_max < ehci->uframe_periodic_max) { - allocated_max = 0; + u8 allocated_max = 0; - for (frame = 0; frame < ehci->periodic_size; ++frame) - for (uframe = 0; uframe < 7; ++uframe) - allocated_max = max(allocated_max, - periodic_usecs (ehci, frame, uframe)); + for (uframe = 0; uframe < EHCI_BANDWIDTH_SIZE; ++uframe) + allocated_max = max(allocated_max, + ehci->bandwidth[uframe]); if (allocated_max > uframe_periodic_max) { ehci_info(ehci, diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 78fa76da332..b9fd0396011 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -362,10 +362,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (err) + return err; hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev, dev_name(&pdev->dev)); @@ -388,7 +387,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) err = clk_prepare_enable(tegra->clk); if (err) - goto cleanup_clk_get; + goto cleanup_hcd_create; tegra_periph_reset_assert(tegra->clk); udelay(1); @@ -465,8 +464,6 @@ cleanup_phy: usb_phy_shutdown(hcd->phy); cleanup_clk_en: clk_disable_unprepare(tegra->clk); -cleanup_clk_get: - clk_put(tegra->clk); cleanup_hcd_create: usb_put_hcd(hcd); return err; diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c index 1c370dfbee0..cdad8438c02 100644 --- a/drivers/usb/host/ehci-w90x900.c +++ b/drivers/usb/host/ehci-w90x900.c @@ -11,13 +11,28 @@ * */ +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ehci.h" /* enable phy0 and phy1 for w90p910 */ #define ENPHY (0x01<<8) #define PHY0_CTR (0xA4) #define PHY1_CTR (0xA8) +#define DRIVER_DESC "EHCI w90x900 driver" + +static const char hcd_name[] = "ehci-w90x900 "; + +static struct hc_driver __read_mostly ehci_w90x900_hc_driver; + static int usb_w90x900_probe(const struct hc_driver *driver, struct platform_device *pdev) { @@ -90,8 +105,8 @@ err1: return retval; } -static -void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev) +static void usb_w90x900_remove(struct usb_hcd *hcd, + struct platform_device *pdev) { usb_remove_hcd(hcd); iounmap(hcd->regs); @@ -99,54 +114,6 @@ void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev) usb_put_hcd(hcd); } -static const struct hc_driver ehci_w90x900_hc_driver = { - .description = hcd_name, - .product_desc = "Nuvoton w90x900 EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_USB2|HCD_MEMORY|HCD_BH, - - /* - * basic lifecycle operations - */ - .reset = ehci_setup, - .start = ehci_run, - - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, -#endif - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - static int ehci_w90x900_probe(struct platform_device *pdev) { if (usb_disabled()) @@ -173,7 +140,25 @@ static struct platform_driver ehci_hcd_w90x900_driver = { }, }; +static int __init ehci_w90X900_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_w90x900_hc_driver, NULL); + return platform_driver_register(&ehci_hcd_w90x900_driver); +} +module_init(ehci_w90X900_init); + +static void __exit ehci_w90X900_cleanup(void) +{ + platform_driver_unregister(&ehci_hcd_w90x900_driver); +} +module_exit(ehci_w90X900_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); -MODULE_DESCRIPTION("w90p910 usb ehci driver!"); -MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:w90p910-ehci"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 291db7d09f2..e8f41c5e771 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -54,6 +54,28 @@ struct ehci_stats { unsigned long unlink; }; +/* + * Scheduling and budgeting information for periodic transfers, for both + * high-speed devices and full/low-speed devices lying behind a TT. + */ +struct ehci_per_sched { + struct usb_device *udev; /* access to the TT */ + struct usb_host_endpoint *ep; + struct list_head ps_list; /* node on ehci_tt's ps_list */ + u16 tt_usecs; /* time on the FS/LS bus */ + u16 cs_mask; /* C-mask and S-mask bytes */ + u16 period; /* actual period in frames */ + u16 phase; /* actual phase, frame part */ + u8 bw_phase; /* same, for bandwidth + reservation */ + u8 phase_uf; /* uframe part of the phase */ + u8 usecs, c_usecs; /* times on the HS bus */ + u8 bw_uperiod; /* period in microframes, for + bandwidth reservation */ + u8 bw_period; /* same, in frames */ +}; +#define NO_FRAME 29999 /* frame not assigned yet */ + /* ehci_hcd->lock guards shared data against other CPUs: * ehci_hcd: async, unlink, periodic (and shadow), ... * usb_host_endpoint: hcpriv @@ -230,6 +252,15 @@ struct ehci_hcd { /* one per controller */ struct dentry *debug_dir; #endif + /* bandwidth usage */ +#define EHCI_BANDWIDTH_SIZE 64 +#define EHCI_BANDWIDTH_FRAMES (EHCI_BANDWIDTH_SIZE >> 3) + u8 bandwidth[EHCI_BANDWIDTH_SIZE]; + /* us allocated per uframe */ + u8 tt_budget[EHCI_BANDWIDTH_SIZE]; + /* us budgeted per uframe */ + struct list_head tt_list; + /* platform-specific data -- must come last */ unsigned long priv[0] __aligned(sizeof(s64)); }; @@ -385,6 +416,7 @@ struct ehci_qh { struct list_head intr_node; /* list of intr QHs */ struct ehci_qtd *dummy; struct list_head unlink_node; + struct ehci_per_sched ps; /* scheduling info */ unsigned unlink_cycle; @@ -398,16 +430,8 @@ struct ehci_qh { u8 xacterrs; /* XactErr retry counter */ #define QH_XACTERR_MAX 32 /* XactErr retry limit */ - /* periodic schedule info */ - u8 usecs; /* intr bandwidth */ u8 gap_uf; /* uframes split/csplit gap */ - u8 c_usecs; /* ... split completion bw */ - u16 tt_usecs; /* tt downstream bandwidth */ - unsigned short period; /* polling interval */ - unsigned short start; /* where polling starts */ -#define NO_FRAME ((unsigned short)~0) /* pick new start */ - struct usb_device *dev; /* access to TT */ unsigned is_out:1; /* bulk or intr OUT */ unsigned clearing_tt:1; /* Clear-TT-Buf in progress */ unsigned dequeue_during_giveback:1; @@ -434,6 +458,7 @@ struct ehci_iso_packet { struct ehci_iso_sched { struct list_head td_list; unsigned span; + unsigned first_packet; struct ehci_iso_packet packet [0]; }; @@ -449,22 +474,17 @@ struct ehci_iso_stream { u8 highspeed; struct list_head td_list; /* queued itds/sitds */ struct list_head free_list; /* list of unused itds/sitds */ - struct usb_device *udev; - struct usb_host_endpoint *ep; /* output of (re)scheduling */ - int next_uframe; + struct ehci_per_sched ps; /* scheduling info */ + unsigned next_uframe; __hc32 splits; /* the rest is derived from the endpoint descriptor, - * trusting urb->interval == f(epdesc->bInterval) and * including the extra info for hw_bufp[0..2] */ - u8 usecs, c_usecs; - u16 interval; - u16 tt_usecs; + u16 uperiod; /* period in uframes */ u16 maxp; - u16 raw_mask; unsigned bandwidth; /* This is used to initialize iTD's hw_bufp fields */ @@ -579,6 +599,35 @@ struct ehci_fstn { /*-------------------------------------------------------------------------*/ +/* + * USB-2.0 Specification Sections 11.14 and 11.18 + * Scheduling and budgeting split transactions using TTs + * + * A hub can have a single TT for all its ports, or multiple TTs (one for each + * port). The bandwidth and budgeting information for the full/low-speed bus + * below each TT is self-contained and independent of the other TTs or the + * high-speed bus. + * + * "Bandwidth" refers to the number of microseconds on the FS/LS bus allocated + * to an interrupt or isochronous endpoint for each frame. "Budget" refers to + * the best-case estimate of the number of full-speed bytes allocated to an + * endpoint for each microframe within an allocated frame. + * + * Removal of an endpoint invalidates a TT's budget. Instead of trying to + * keep an up-to-date record, we recompute the budget when it is needed. + */ + +struct ehci_tt { + u16 bandwidth[EHCI_BANDWIDTH_FRAMES]; + + struct list_head tt_list; /* List of all ehci_tt's */ + struct list_head ps_list; /* Items using this TT */ + struct usb_tt *usb_tt; + int tt_port; /* TT port number */ +}; + +/*-------------------------------------------------------------------------*/ + /* Prepare the PORTSC wakeup flags during controller suspend/resume */ #define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup) \ diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 0b46542591f..0551c0af0fd 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -26,6 +26,8 @@ #include <linux/io.h> #include <linux/usb.h> #include <linux/usb/hcd.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/of_gpio.h> #include <linux/slab.h> diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index fce13bcc4a3..55486bd23cf 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -412,7 +412,7 @@ struct debug_buffer { tmp = 'h'; break; \ default: \ tmp = '?'; break; \ - }; tmp; }) + } tmp; }) static inline char token_mark(struct fotg210_hcd *fotg210, __hc32 token) { diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index cfbff716182..abd5050a489 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -24,7 +24,7 @@ struct fsl_usb2_dev_data { enum fsl_usb2_operating_modes op_mode; /* operating mode */ }; -struct fsl_usb2_dev_data dr_mode_data[] = { +static struct fsl_usb2_dev_data dr_mode_data[] = { { .dr_mode = "host", .drivers = { "fsl-ehci", NULL, NULL, }, @@ -42,7 +42,7 @@ struct fsl_usb2_dev_data dr_mode_data[] = { }, }; -struct fsl_usb2_dev_data *get_dr_mode_data(struct device_node *np) +static struct fsl_usb2_dev_data *get_dr_mode_data(struct device_node *np) { const unsigned char *prop; int i; @@ -75,7 +75,7 @@ static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type) return FSL_USB2_PHY_NONE; } -struct platform_device *fsl_usb2_device_register( +static struct platform_device *fsl_usb2_device_register( struct platform_device *ofdev, struct fsl_usb2_platform_data *pdata, const char *name, int id) @@ -260,6 +260,7 @@ int fsl_usb2_mpc5121_init(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); struct clk *clk; + int err; char clk_name[10]; int base, clk_num; @@ -272,13 +273,16 @@ int fsl_usb2_mpc5121_init(struct platform_device *pdev) return -ENODEV; snprintf(clk_name, sizeof(clk_name), "usb%d_clk", clk_num); - clk = clk_get(&pdev->dev, clk_name); + clk = devm_clk_get(pdev->dev.parent, clk_name); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clk\n"); return PTR_ERR(clk); } - - clk_enable(clk); + err = clk_prepare_enable(clk); + if (err) { + dev_err(&pdev->dev, "failed to enable clk\n"); + return err; + } pdata->clk = clk; if (pdata->phy_mode == FSL_USB2_PHY_UTMI_WIDE) { @@ -302,10 +306,8 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev) pdata->regs = NULL; - if (pdata->clk) { - clk_disable(pdata->clk); - clk_put(pdata->clk); - } + if (pdata->clk) + clk_disable_unprepare(pdata->clk); } static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = { diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c index 299253c826c..e1c6d850a7e 100644 --- a/drivers/usb/host/fusbh200-hcd.c +++ b/drivers/usb/host/fusbh200-hcd.c @@ -402,7 +402,7 @@ struct debug_buffer { case QH_LOW_SPEED: tmp = 'l'; break; \ case QH_HIGH_SPEED: tmp = 'h'; break; \ default: tmp = '?'; break; \ - }; tmp; }) + } tmp; }) static inline char token_mark(struct fusbh200_hcd *fusbh200, __hc32 token) { diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index 5b86ffb88f1..ada0a52797b 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -199,10 +199,14 @@ static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd) { struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; - dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, - usb_hcd, hwahc); - return -ENOSYS; + /* + * We cannot query the HWA for the WUSB time since that requires sending + * a synchronous URB and this function can be called in_interrupt. + * Instead, query the USB frame number for our parent and use that. + */ + return usb_get_current_frame_number(wa->usb_dev); } static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, @@ -566,14 +570,10 @@ found: goto error; } wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; - /* Make LE fields CPU order */ - wa_descr->bcdWAVersion = le16_to_cpu(wa_descr->bcdWAVersion); - wa_descr->wNumRPipes = le16_to_cpu(wa_descr->wNumRPipes); - wa_descr->wRPipeMaxBlock = le16_to_cpu(wa_descr->wRPipeMaxBlock); - if (wa_descr->bcdWAVersion > 0x0100) + if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100) dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", - wa_descr->bcdWAVersion & 0xff00 >> 8, - wa_descr->bcdWAVersion & 0x00ff); + le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00 >> 8, + le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff); result = 0; error: return result; @@ -679,7 +679,8 @@ static void hwahc_security_release(struct hwahc *hwahc) /* nothing to do here so far... */ } -static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface) +static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface, + kernel_ulong_t quirks) { int result; struct device *dev = &iface->dev; @@ -724,7 +725,7 @@ static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface) dev_err(dev, "Can't create WUSB HC structures: %d\n", result); goto error_wusbhc_create; } - result = wa_create(&hwahc->wa, iface); + result = wa_create(&hwahc->wa, iface, quirks); if (result < 0) goto error_wa_create; return 0; @@ -780,7 +781,7 @@ static int hwahc_probe(struct usb_interface *usb_iface, wusbhc = usb_hcd_to_wusbhc(usb_hcd); hwahc = container_of(wusbhc, struct hwahc, wusbhc); hwahc_init(hwahc); - result = hwahc_create(hwahc, usb_iface); + result = hwahc_create(hwahc, usb_iface, id->driver_info); if (result < 0) { dev_err(dev, "Cannot initialize internals: %d\n", result); goto error_hwahc_create; @@ -824,6 +825,12 @@ static void hwahc_disconnect(struct usb_interface *usb_iface) } static struct usb_device_id hwahc_id_table[] = { + /* Alereon 5310 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x02, 0x01), + .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC }, + /* Alereon 5611 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x02, 0x01), + .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC }, /* FIXME: use class labels for this */ { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, {}, diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 60a5de505ca..adb01d950a1 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -824,13 +824,13 @@ static int imx21_hc_urb_enqueue_isoc(struct usb_hcd *hcd, i = DIV_ROUND_UP(wrap_frame( cur_frame - urb->start_frame), urb->interval); - if (urb->transfer_flags & URB_ISO_ASAP) { + + /* Treat underruns as if URB_ISO_ASAP was set */ + if ((urb->transfer_flags & URB_ISO_ASAP) || + i >= urb->number_of_packets) { urb->start_frame = wrap_frame(urb->start_frame + i * urb->interval); i = 0; - } else if (i >= urb->number_of_packets) { - ret = -EXDEV; - goto alloc_dmem_failed; } } } diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 6f29abad681..935a2dd367a 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2108,7 +2108,7 @@ static int isp1362_show(struct seq_file *s, void *unused) default: s = "?"; break; - }; + } s;}), ep->maxpacket) ; list_for_each_entry(urb, &ep->hep->urb_list, urb_list) { seq_printf(s, " urb%p, %d/%d\n", urb, diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index caa3764a340..418444ebb1b 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -13,19 +13,24 @@ */ #include <linux/clk.h> -#include <linux/platform_device.h> +#include <linux/dma-mapping.h> #include <linux/of_platform.h> #include <linux/of_gpio.h> +#include <linux/platform_device.h> #include <linux/platform_data/atmel.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> #include <mach/hardware.h> #include <asm/gpio.h> #include <mach/cpu.h> -#ifndef CONFIG_ARCH_AT91 -#error "CONFIG_ARCH_AT91 must be defined." -#endif + +#include "ohci.h" #define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS) #define at91_for_each_port(index) \ @@ -33,7 +38,17 @@ /* interface, function and usb clocks; sometimes also an AHB clock */ static struct clk *iclk, *fclk, *uclk, *hclk; +/* interface and function clocks; sometimes also an AHB clock */ + +#define DRIVER_DESC "OHCI Atmel driver" + +static const char hcd_name[] = "ohci-atmel"; + +static struct hc_driver __read_mostly ohci_at91_hc_driver; static int clocked; +static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, + u16 wValue, u16 wIndex, char *buf, u16 wLength); +static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); extern int usb_disabled(void); @@ -117,6 +132,8 @@ static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); static int usb_hcd_at91_probe(const struct hc_driver *driver, struct platform_device *pdev) { + struct at91_usbh_data *board; + struct ohci_hcd *ohci; int retval; struct usb_hcd *hcd = NULL; @@ -177,8 +194,10 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, } } + board = hcd->self.controller->platform_data; + ohci = hcd_to_ohci(hcd); + ohci->num_ports = board->ports; at91_start_hc(pdev); - ohci_hcd_init(hcd_to_ohci(hcd)); retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED); if (retval == 0) @@ -238,36 +257,6 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd, } /*-------------------------------------------------------------------------*/ - -static int -ohci_at91_reset (struct usb_hcd *hcd) -{ - struct at91_usbh_data *board = dev_get_platdata(hcd->self.controller); - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - ohci->num_ports = board->ports; - return 0; -} - -static int -ohci_at91_start (struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - - if ((ret = ohci_run(ohci)) < 0) { - dev_err(hcd->self.controller, "can't start %s\n", - hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - return 0; -} - static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable) { if (!valid_port(port)) @@ -297,8 +286,8 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) */ static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf) { - struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller); - int length = ohci_hub_status_data(hcd, buf); + struct at91_usbh_data *pdata = hcd->self.controller->platform_data; + int length = orig_ohci_hub_status_data(hcd, buf); int port; at91_for_each_port(port) { @@ -376,7 +365,8 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; } - ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength); + ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, + buf, wLength); if (ret) goto out; @@ -430,51 +420,6 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /*-------------------------------------------------------------------------*/ -static const struct hc_driver ohci_at91_hc_driver = { - .description = hcd_name, - .product_desc = "AT91 OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .reset = ohci_at91_reset, - .start = ohci_at91_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_at91_hub_status_data, - .hub_control = ohci_at91_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ - static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) { struct platform_device *pdev = data; @@ -524,7 +469,7 @@ MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids); static int ohci_at91_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - int i, gpio; + int i, gpio, ret; enum of_gpio_flags flags; struct at91_usbh_data *pdata; u32 ports; @@ -536,10 +481,9 @@ static int ohci_at91_of_init(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -703,7 +647,11 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) * REVISIT: some boards will be able to turn VBUS off... */ if (at91_suspend_entering_slow_clock()) { - ohci_usb_reset (ohci); + ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); + ohci->hc_control &= OHCI_CTRL_RWC; + ohci_writel(ohci, ohci->hc_control, &ohci->regs->control); + ohci->rh_state = OHCI_RH_HALTED; + /* flush the writes */ (void) ohci_readl (ohci, &ohci->regs->control); at91_stop_clock(); @@ -730,8 +678,6 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) #define ohci_hcd_at91_drv_resume NULL #endif -MODULE_ALIAS("platform:at91_ohci"); - static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, .remove = ohci_hcd_at91_drv_remove, @@ -744,3 +690,40 @@ static struct platform_driver ohci_hcd_at91_driver = { .of_match_table = of_match_ptr(at91_ohci_dt_ids), }, }; + +static int __init ohci_at91_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ohci_init_driver(&ohci_at91_hc_driver, NULL); + + /* + * The Atmel HW has some unusual quirks, which require Atmel-specific + * workarounds. We override certain hc_driver functions here to + * achieve that. We explicitly do not enhance ohci_driver_overrides to + * allow this more easily, since this is an unusual case, and we don't + * want to encourage others to override these functions by making it + * too easy. + */ + + orig_ohci_hub_control = ohci_at91_hc_driver.hub_control; + orig_ohci_hub_status_data = ohci_at91_hc_driver.hub_status_data; + + ohci_at91_hc_driver.hub_status_data = ohci_at91_hub_status_data; + ohci_at91_hc_driver.hub_control = ohci_at91_hub_control; + + return platform_driver_register(&ohci_hcd_at91_driver); +} +module_init(ohci_at91_init); + +static void __exit ohci_at91_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_at91_driver); +} +module_exit(ohci_at91_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:at91_ohci"); diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 31b81f9eacd..3fca52ec02a 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -17,7 +17,7 @@ case PIPE_BULK: temp = "bulk"; break; \ case PIPE_INTERRUPT: temp = "intr"; break; \ default: temp = "isoc"; break; \ - }; temp;}) + } temp;}) #define pipestring(pipe) edstring(usb_pipetype(pipe)) /* debug| print the main components of an URB diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c deleted file mode 100644 index 84a20d5223b..00000000000 --- a/drivers/usb/host/ohci-ep93xx.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * OHCI HCD (Host Controller Driver) for USB. - * - * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> - * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> - * (C) Copyright 2002 Hewlett-Packard Company - * - * Bus Glue for ep93xx. - * - * Written by Christopher Hoover <ch@hpl.hp.com> - * Based on fragments of previous driver by Russell King et al. - * - * Modified for LH7A404 from ohci-sa1111.c - * by Durgesh Pattamatta <pattamattad@sharpsec.com> - * - * Modified for pxa27x from ohci-lh7a404.c - * by Nick Bane <nick@cecomputing.co.uk> 26-8-2004 - * - * Modified for ep93xx from ohci-pxa27x.c - * by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006 - * Based on an earlier driver by Ray Lehtiniemi - * - * This file is licenced under the GPL. - */ - -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/signal.h> -#include <linux/platform_device.h> - -static struct clk *usb_host_clock; - -static int ohci_ep93xx_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run(ohci)) < 0) { - dev_err(hcd->self.controller, "can't start %s\n", - hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - - return 0; -} - -static struct hc_driver ohci_ep93xx_hc_driver = { - .description = hcd_name, - .product_desc = "EP93xx OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - .start = ohci_ep93xx_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - .get_frame_number = ohci_get_frame, - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct resource *res; - int irq; - int ret; - - if (usb_disabled()) - return -ENODEV; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENXIO; - - hcd = usb_create_hcd(&ohci_ep93xx_hc_driver, &pdev->dev, "ep93xx"); - if (!hcd) - return -ENOMEM; - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - hcd->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hcd->regs)) { - ret = PTR_ERR(hcd->regs); - goto err_put_hcd; - } - - usb_host_clock = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(usb_host_clock)) { - ret = PTR_ERR(usb_host_clock); - goto err_put_hcd; - } - - clk_enable(usb_host_clock); - - ohci_hcd_init(hcd_to_ohci(hcd)); - - ret = usb_add_hcd(hcd, irq, 0); - if (ret) - goto err_clk_disable; - - return 0; - -err_clk_disable: - clk_disable(usb_host_clock); -err_put_hcd: - usb_put_hcd(hcd); - - return ret; -} - -static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - clk_disable(usb_host_clock); - usb_put_hcd(hcd); - - return 0; -} - -#ifdef CONFIG_PM -static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - - if (time_before(jiffies, ohci->next_statechange)) - msleep(5); - ohci->next_statechange = jiffies; - - clk_disable(usb_host_clock); - return 0; -} - -static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - - if (time_before(jiffies, ohci->next_statechange)) - msleep(5); - ohci->next_statechange = jiffies; - - clk_enable(usb_host_clock); - - ohci_resume(hcd, false); - return 0; -} -#endif - - -static struct platform_driver ohci_hcd_ep93xx_driver = { - .probe = ohci_hcd_ep93xx_drv_probe, - .remove = ohci_hcd_ep93xx_drv_remove, - .shutdown = usb_hcd_platform_shutdown, -#ifdef CONFIG_PM - .suspend = ohci_hcd_ep93xx_drv_suspend, - .resume = ohci_hcd_ep93xx_drv_resume, -#endif - .driver = { - .name = "ep93xx-ohci", - .owner = THIS_MODULE, - }, -}; - -MODULE_ALIAS("platform:ep93xx-ohci"); diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index dc6ee9adacf..91ec9b2cd37 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -12,98 +12,55 @@ */ #include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> -#include <linux/platform_data/usb-ohci-exynos.h> #include <linux/usb/phy.h> #include <linux/usb/samsung_usb_phy.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/usb/otg.h> + +#include "ohci.h" + +#define DRIVER_DESC "OHCI EXYNOS driver" + +static const char hcd_name[] = "ohci-exynos"; +static struct hc_driver __read_mostly exynos_ohci_hc_driver; + +#define to_exynos_ohci(hcd) (struct exynos_ohci_hcd *)(hcd_to_ohci(hcd)->priv) struct exynos_ohci_hcd { - struct device *dev; - struct usb_hcd *hcd; struct clk *clk; struct usb_phy *phy; struct usb_otg *otg; - struct exynos4_ohci_platdata *pdata; }; -static void exynos_ohci_phy_enable(struct exynos_ohci_hcd *exynos_ohci) +static void exynos_ohci_phy_enable(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(exynos_ohci->dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); if (exynos_ohci->phy) usb_phy_init(exynos_ohci->phy); - else if (exynos_ohci->pdata && exynos_ohci->pdata->phy_init) - exynos_ohci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); } -static void exynos_ohci_phy_disable(struct exynos_ohci_hcd *exynos_ohci) +static void exynos_ohci_phy_disable(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(exynos_ohci->dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); if (exynos_ohci->phy) usb_phy_shutdown(exynos_ohci->phy); - else if (exynos_ohci->pdata && exynos_ohci->pdata->phy_exit) - exynos_ohci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); -} - -static int ohci_exynos_reset(struct usb_hcd *hcd) -{ - return ohci_init(hcd_to_ohci(hcd)); -} - -static int ohci_exynos_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci); - - ret = ohci_run(ohci); - if (ret < 0) { - dev_err(hcd->self.controller, "can't start %s\n", - hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - - return 0; } -static const struct hc_driver exynos_ohci_hc_driver = { - .description = hcd_name, - .product_desc = "EXYNOS OHCI Host Controller", - .hcd_priv_size = sizeof(struct ohci_hcd), - - .irq = ohci_irq, - .flags = HCD_MEMORY|HCD_USB11, - - .reset = ohci_exynos_reset, - .start = ohci_exynos_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - .get_frame_number = ohci_get_frame, - - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - static int exynos_ohci_probe(struct platform_device *pdev) { - struct exynos4_ohci_platdata *pdata = dev_get_platdata(&pdev->dev); struct exynos_ohci_hcd *exynos_ohci; struct usb_hcd *hcd; - struct ohci_hcd *ohci; struct resource *res; struct usb_phy *phy; int irq; @@ -114,15 +71,18 @@ static int exynos_ohci_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we move to full device tree support this will vanish off. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - - exynos_ohci = devm_kzalloc(&pdev->dev, sizeof(struct exynos_ohci_hcd), - GFP_KERNEL); - if (!exynos_ohci) + err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (err) + return err; + + hcd = usb_create_hcd(&exynos_ohci_hc_driver, + &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + dev_err(&pdev->dev, "Unable to create HCD\n"); return -ENOMEM; + } + + exynos_ohci = to_exynos_ohci(hcd); if (of_device_is_compatible(pdev->dev.of_node, "samsung,exynos5440-ohci")) @@ -130,30 +90,15 @@ static int exynos_ohci_probe(struct platform_device *pdev) phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); if (IS_ERR(phy)) { - /* Fallback to pdata */ - if (!pdata) { - dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); - return -EPROBE_DEFER; - } else { - exynos_ohci->pdata = pdata; - } + usb_put_hcd(hcd); + dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); + return -EPROBE_DEFER; } else { exynos_ohci->phy = phy; exynos_ohci->otg = phy->otg; } skip_phy: - - exynos_ohci->dev = &pdev->dev; - - hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) { - dev_err(&pdev->dev, "Unable to create HCD\n"); - return -ENOMEM; - } - - exynos_ohci->hcd = hcd; exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost"); if (IS_ERR(exynos_ohci->clk)) { @@ -190,26 +135,21 @@ skip_phy: } if (exynos_ohci->otg) - exynos_ohci->otg->set_host(exynos_ohci->otg, - &exynos_ohci->hcd->self); + exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_enable(exynos_ohci); + platform_set_drvdata(pdev, hcd); - ohci = hcd_to_ohci(hcd); - ohci_hcd_init(ohci); + exynos_ohci_phy_enable(pdev); err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { dev_err(&pdev->dev, "Failed to add USB HCD\n"); goto fail_add_hcd; } - - platform_set_drvdata(pdev, exynos_ohci); - return 0; fail_add_hcd: - exynos_ohci_phy_disable(exynos_ohci); + exynos_ohci_phy_disable(pdev); fail_io: clk_disable_unprepare(exynos_ohci->clk); fail_clk: @@ -219,16 +159,15 @@ fail_clk: static int exynos_ohci_remove(struct platform_device *pdev) { - struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev); - struct usb_hcd *hcd = exynos_ohci->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); usb_remove_hcd(hcd); if (exynos_ohci->otg) - exynos_ohci->otg->set_host(exynos_ohci->otg, - &exynos_ohci->hcd->self); + exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_disable(exynos_ohci); + exynos_ohci_phy_disable(pdev); clk_disable_unprepare(exynos_ohci->clk); @@ -239,8 +178,7 @@ static int exynos_ohci_remove(struct platform_device *pdev) static void exynos_ohci_shutdown(struct platform_device *pdev) { - struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev); - struct usb_hcd *hcd = exynos_ohci->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); @@ -249,9 +187,10 @@ static void exynos_ohci_shutdown(struct platform_device *pdev) #ifdef CONFIG_PM static int exynos_ohci_suspend(struct device *dev) { - struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev); - struct usb_hcd *hcd = exynos_ohci->hcd; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct platform_device *pdev = to_platform_device(dev); unsigned long flags; int rc = 0; @@ -271,10 +210,9 @@ static int exynos_ohci_suspend(struct device *dev) clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); if (exynos_ohci->otg) - exynos_ohci->otg->set_host(exynos_ohci->otg, - &exynos_ohci->hcd->self); + exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_disable(exynos_ohci); + exynos_ohci_phy_disable(pdev); clk_disable_unprepare(exynos_ohci->clk); @@ -286,16 +224,16 @@ fail: static int exynos_ohci_resume(struct device *dev) { - struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev); - struct usb_hcd *hcd = exynos_ohci->hcd; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); + struct platform_device *pdev = to_platform_device(dev); clk_prepare_enable(exynos_ohci->clk); if (exynos_ohci->otg) - exynos_ohci->otg->set_host(exynos_ohci->otg, - &exynos_ohci->hcd->self); + exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_enable(exynos_ohci); + exynos_ohci_phy_enable(pdev); ohci_resume(hcd, false); @@ -306,6 +244,10 @@ static int exynos_ohci_resume(struct device *dev) #define exynos_ohci_resume NULL #endif +static const struct ohci_driver_overrides exynos_overrides __initconst = { + .extra_priv_size = sizeof(struct exynos_ohci_hcd), +}; + static const struct dev_pm_ops exynos_ohci_pm_ops = { .suspend = exynos_ohci_suspend, .resume = exynos_ohci_resume, @@ -331,6 +273,23 @@ static struct platform_driver exynos_ohci_driver = { .of_match_table = of_match_ptr(exynos_ohci_match), } }; +static int __init ohci_exynos_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ohci_init_driver(&exynos_ohci_hc_driver, &exynos_overrides); + return platform_driver_register(&exynos_ohci_driver); +} +module_init(ohci_exynos_init); + +static void __exit ohci_exynos_cleanup(void) +{ + platform_driver_unregister(&exynos_ohci_driver); +} +module_exit(ohci_exynos_cleanup); MODULE_ALIAS("platform:exynos-ohci"); MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 8f6b695af6a..8ada13f8dde 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -216,31 +216,26 @@ static int ohci_urb_enqueue ( frame &= ~(ed->interval - 1); frame |= ed->branch; urb->start_frame = frame; + ed->last_iso = frame + ed->interval * (size - 1); } } else if (ed->type == PIPE_ISOCHRONOUS) { u16 next = ohci_frame_no(ohci) + 1; u16 frame = ed->last_iso + ed->interval; + u16 length = ed->interval * (size - 1); /* Behind the scheduling threshold? */ if (unlikely(tick_before(frame, next))) { - /* USB_ISO_ASAP: Round up to the first available slot */ + /* URB_ISO_ASAP: Round up to the first available slot */ if (urb->transfer_flags & URB_ISO_ASAP) { frame += (next - frame + ed->interval - 1) & -ed->interval; /* - * Not ASAP: Use the next slot in the stream. If - * the entire URB falls before the threshold, fail. + * Not ASAP: Use the next slot in the stream, + * no matter what. */ } else { - if (tick_before(frame + ed->interval * - (urb->number_of_packets - 1), next)) { - retval = -EXDEV; - usb_hcd_unlink_urb_from_ep(hcd, urb); - goto fail; - } - /* * Some OHCI hardware doesn't handle late TDs * correctly. After retiring them it proceeds @@ -251,9 +246,16 @@ static int ohci_urb_enqueue ( urb_priv->td_cnt = DIV_ROUND_UP( (u16) (next - frame), ed->interval); + if (urb_priv->td_cnt >= urb_priv->length) { + ++urb_priv->td_cnt; /* Mark it */ + ohci_dbg(ohci, "iso underrun %p (%u+%u < %u)\n", + urb, frame, length, + next); + } } } urb->start_frame = frame; + ed->last_iso = frame + length; } /* fill the TDs and link them to the ed; and @@ -1159,10 +1161,12 @@ void ohci_init_driver(struct hc_driver *drv, /* Copy the generic table to drv and then apply the overrides */ *drv = ohci_hc_driver; - drv->product_desc = over->product_desc; - drv->hcd_priv_size += over->extra_priv_size; - if (over->reset) - drv->reset = over->reset; + if (over) { + drv->product_desc = over->product_desc; + drv->hcd_priv_size += over->extra_priv_size; + if (over->reset) + drv->reset = over->reset; + } } EXPORT_SYMBOL_GPL(ohci_init_driver); @@ -1177,46 +1181,6 @@ MODULE_LICENSE ("GPL"); #define SA1111_DRIVER ohci_hcd_sa1111_driver #endif -#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX) -#include "ohci-s3c2410.c" -#define S3C2410_PLATFORM_DRIVER ohci_hcd_s3c2410_driver -#endif - -#ifdef CONFIG_USB_OHCI_EXYNOS -#include "ohci-exynos.c" -#define EXYNOS_PLATFORM_DRIVER exynos_ohci_driver -#endif - -#ifdef CONFIG_USB_OHCI_HCD_OMAP1 -#include "ohci-omap.c" -#define OMAP1_PLATFORM_DRIVER ohci_hcd_omap_driver -#endif - -#ifdef CONFIG_USB_OHCI_HCD_OMAP3 -#include "ohci-omap3.c" -#define OMAP3_PLATFORM_DRIVER ohci_hcd_omap3_driver -#endif - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#include "ohci-pxa27x.c" -#define PLATFORM_DRIVER ohci_hcd_pxa27x_driver -#endif - -#ifdef CONFIG_ARCH_EP93XX -#include "ohci-ep93xx.c" -#define EP93XX_PLATFORM_DRIVER ohci_hcd_ep93xx_driver -#endif - -#ifdef CONFIG_ARCH_AT91 -#include "ohci-at91.c" -#define AT91_PLATFORM_DRIVER ohci_hcd_at91_driver -#endif - -#ifdef CONFIG_ARCH_LPC32XX -#include "ohci-nxp.c" -#define NXP_PLATFORM_DRIVER usb_hcd_nxp_driver -#endif - #ifdef CONFIG_ARCH_DAVINCI_DA8XX #include "ohci-da8xx.c" #define DAVINCI_PLATFORM_DRIVER ohci_hcd_da8xx_driver @@ -1227,11 +1191,6 @@ MODULE_LICENSE ("GPL"); #define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver #endif -#ifdef CONFIG_PLAT_SPEAR -#include "ohci-spear.c" -#define SPEAR_PLATFORM_DRIVER spear_ohci_hcd_driver -#endif - #ifdef CONFIG_PPC_PS3 #include "ohci-ps3.c" #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver @@ -1294,18 +1253,6 @@ static int __init ohci_hcd_mod_init(void) goto error_platform; #endif -#ifdef OMAP1_PLATFORM_DRIVER - retval = platform_driver_register(&OMAP1_PLATFORM_DRIVER); - if (retval < 0) - goto error_omap1_platform; -#endif - -#ifdef OMAP3_PLATFORM_DRIVER - retval = platform_driver_register(&OMAP3_PLATFORM_DRIVER); - if (retval < 0) - goto error_omap3_platform; -#endif - #ifdef OF_PLATFORM_DRIVER retval = platform_driver_register(&OF_PLATFORM_DRIVER); if (retval < 0) @@ -1330,79 +1277,19 @@ static int __init ohci_hcd_mod_init(void) goto error_tmio; #endif -#ifdef S3C2410_PLATFORM_DRIVER - retval = platform_driver_register(&S3C2410_PLATFORM_DRIVER); - if (retval < 0) - goto error_s3c2410; -#endif - -#ifdef EXYNOS_PLATFORM_DRIVER - retval = platform_driver_register(&EXYNOS_PLATFORM_DRIVER); - if (retval < 0) - goto error_exynos; -#endif - -#ifdef EP93XX_PLATFORM_DRIVER - retval = platform_driver_register(&EP93XX_PLATFORM_DRIVER); - if (retval < 0) - goto error_ep93xx; -#endif - -#ifdef AT91_PLATFORM_DRIVER - retval = platform_driver_register(&AT91_PLATFORM_DRIVER); - if (retval < 0) - goto error_at91; -#endif - -#ifdef NXP_PLATFORM_DRIVER - retval = platform_driver_register(&NXP_PLATFORM_DRIVER); - if (retval < 0) - goto error_nxp; -#endif - #ifdef DAVINCI_PLATFORM_DRIVER retval = platform_driver_register(&DAVINCI_PLATFORM_DRIVER); if (retval < 0) goto error_davinci; #endif -#ifdef SPEAR_PLATFORM_DRIVER - retval = platform_driver_register(&SPEAR_PLATFORM_DRIVER); - if (retval < 0) - goto error_spear; -#endif - return retval; /* Error path */ -#ifdef SPEAR_PLATFORM_DRIVER - platform_driver_unregister(&SPEAR_PLATFORM_DRIVER); - error_spear: -#endif #ifdef DAVINCI_PLATFORM_DRIVER platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER); error_davinci: #endif -#ifdef NXP_PLATFORM_DRIVER - platform_driver_unregister(&NXP_PLATFORM_DRIVER); - error_nxp: -#endif -#ifdef AT91_PLATFORM_DRIVER - platform_driver_unregister(&AT91_PLATFORM_DRIVER); - error_at91: -#endif -#ifdef EP93XX_PLATFORM_DRIVER - platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); - error_ep93xx: -#endif -#ifdef EXYNOS_PLATFORM_DRIVER - platform_driver_unregister(&EXYNOS_PLATFORM_DRIVER); - error_exynos: -#endif -#ifdef S3C2410_PLATFORM_DRIVER - platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); - error_s3c2410: -#endif #ifdef TMIO_OHCI_DRIVER platform_driver_unregister(&TMIO_OHCI_DRIVER); error_tmio: @@ -1419,14 +1306,6 @@ static int __init ohci_hcd_mod_init(void) platform_driver_unregister(&OF_PLATFORM_DRIVER); error_of_platform: #endif -#ifdef OMAP3_PLATFORM_DRIVER - platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); - error_omap3_platform: -#endif -#ifdef OMAP1_PLATFORM_DRIVER - platform_driver_unregister(&OMAP1_PLATFORM_DRIVER); - error_omap1_platform: -#endif #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); error_platform: @@ -1448,27 +1327,9 @@ module_init(ohci_hcd_mod_init); static void __exit ohci_hcd_mod_exit(void) { -#ifdef SPEAR_PLATFORM_DRIVER - platform_driver_unregister(&SPEAR_PLATFORM_DRIVER); -#endif #ifdef DAVINCI_PLATFORM_DRIVER platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER); #endif -#ifdef NXP_PLATFORM_DRIVER - platform_driver_unregister(&NXP_PLATFORM_DRIVER); -#endif -#ifdef AT91_PLATFORM_DRIVER - platform_driver_unregister(&AT91_PLATFORM_DRIVER); -#endif -#ifdef EP93XX_PLATFORM_DRIVER - platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); -#endif -#ifdef EXYNOS_PLATFORM_DRIVER - platform_driver_unregister(&EXYNOS_PLATFORM_DRIVER); -#endif -#ifdef S3C2410_PLATFORM_DRIVER - platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); -#endif #ifdef TMIO_OHCI_DRIVER platform_driver_unregister(&TMIO_OHCI_DRIVER); #endif @@ -1481,12 +1342,6 @@ static void __exit ohci_hcd_mod_exit(void) #ifdef OF_PLATFORM_DRIVER platform_driver_unregister(&OF_PLATFORM_DRIVER); #endif -#ifdef OMAP3_PLATFORM_DRIVER - platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); -#endif -#ifdef OMAP1_PLATFORM_DRIVER - platform_driver_unregister(&OMAP1_PLATFORM_DRIVER); -#endif #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); #endif diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 2347ab83f04..61705a760e7 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -212,10 +212,11 @@ __acquires(ohci->lock) /* Sometimes PCI D3 suspend trashes frame timings ... */ periodic_reinit (ohci); - /* the following code is executed with ohci->lock held and - * irqs disabled if and only if autostopped is true + /* + * The following code is executed with ohci->lock held and + * irqs disabled if and only if autostopped is true. This + * will cause sparse to warn about a "context imbalance". */ - skip_resume: /* interrupts might have been disabled */ ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable); @@ -531,7 +532,7 @@ ohci_hub_descriptor ( temp |= 0x0010; else if (rh & RH_A_OCPM) /* per-port overcurrent reporting? */ temp |= 0x0008; - desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp); + desc->wHubCharacteristics = cpu_to_le16(temp); /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ rh = roothub_b (ohci); diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index 7d7d507d54e..e99db8a6d55 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -19,10 +19,19 @@ * or implied. */ #include <linux/clk.h> -#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> #include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of.h> +#include <linux/platform_device.h> #include <linux/usb/isp1301.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ohci.h" + #include <mach/hardware.h> #include <asm/mach-types.h> @@ -57,6 +66,11 @@ #define start_int_umask(irq) #endif +#define DRIVER_DESC "OHCI NXP driver" + +static const char hcd_name[] = "ohci-nxp"; +static struct hc_driver __read_mostly ohci_nxp_hc_driver; + static struct i2c_client *isp1301_i2c_client; extern int usb_disabled(void); @@ -132,14 +146,14 @@ static inline void isp1301_vbus_off(void) OTG1_VBUS_DRV); } -static void nxp_start_hc(void) +static void ohci_nxp_start_hc(void) { unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN; __raw_writel(tmp, USB_OTG_STAT_CONTROL); isp1301_vbus_on(); } -static void nxp_stop_hc(void) +static void ohci_nxp_stop_hc(void) { unsigned long tmp; isp1301_vbus_off(); @@ -147,68 +161,9 @@ static void nxp_stop_hc(void) __raw_writel(tmp, USB_OTG_STAT_CONTROL); } -static int ohci_nxp_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run(ohci)) < 0) { - dev_err(hcd->self.controller, "can't start\n"); - ohci_stop(hcd); - return ret; - } - return 0; -} - -static const struct hc_driver ohci_nxp_hc_driver = { - .description = hcd_name, - .product_desc = "nxp OHCI", - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - .hcd_priv_size = sizeof(struct ohci_hcd), - /* - * basic lifecycle operations - */ - .start = ohci_nxp_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -static int usb_hcd_nxp_probe(struct platform_device *pdev) +static int ohci_hcd_nxp_probe(struct platform_device *pdev) { struct usb_hcd *hcd = 0; - struct ohci_hcd *ohci; const struct hc_driver *driver = &ohci_nxp_hc_driver; struct resource *res; int ret = 0, irq; @@ -226,8 +181,9 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) return -EPROBE_DEFER; } - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + goto fail_disable; dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name); if (usb_disabled()) { @@ -313,17 +269,15 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev) goto fail_resource; } - nxp_start_hc(); + ohci_nxp_start_hc(); platform_set_drvdata(pdev, hcd); - ohci = hcd_to_ohci(hcd); - ohci_hcd_init(ohci); dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq); ret = usb_add_hcd(hcd, irq, 0); if (ret == 0) return ret; - nxp_stop_hc(); + ohci_nxp_stop_hc(); fail_resource: usb_put_hcd(hcd); fail_hcd: @@ -345,12 +299,12 @@ fail_disable: return ret; } -static int usb_hcd_nxp_remove(struct platform_device *pdev) +static int ohci_hcd_nxp_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - nxp_stop_hc(); + ohci_nxp_stop_hc(); usb_put_hcd(hcd); clk_disable(usb_pll_clk); clk_put(usb_pll_clk); @@ -366,20 +320,40 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev) MODULE_ALIAS("platform:usb-ohci"); #ifdef CONFIG_OF -static const struct of_device_id usb_hcd_nxp_match[] = { +static const struct of_device_id ohci_hcd_nxp_match[] = { { .compatible = "nxp,ohci-nxp" }, {}, }; -MODULE_DEVICE_TABLE(of, usb_hcd_nxp_match); +MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match); #endif -static struct platform_driver usb_hcd_nxp_driver = { +static struct platform_driver ohci_hcd_nxp_driver = { .driver = { .name = "usb-ohci", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(usb_hcd_nxp_match), + .of_match_table = of_match_ptr(ohci_hcd_nxp_match), }, - .probe = usb_hcd_nxp_probe, - .remove = usb_hcd_nxp_remove, + .probe = ohci_hcd_nxp_probe, + .remove = ohci_hcd_nxp_remove, }; +static int __init ohci_nxp_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ohci_init_driver(&ohci_nxp_hc_driver, NULL); + return platform_driver_register(&ohci_hcd_nxp_driver); +} +module_init(ohci_nxp_init); + +static void __exit ohci_nxp_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_nxp_driver); +} +module_exit(ohci_nxp_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c index 342dc7e543b..6c16dcef15c 100644 --- a/drivers/usb/host/ohci-octeon.c +++ b/drivers/usb/host/ohci-octeon.c @@ -127,8 +127,9 @@ static int ohci_octeon_drv_probe(struct platform_device *pdev) } /* Ohci is a 32-bit device. */ - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; hcd = usb_create_hcd(&ohci_octeon_hc_driver, &pdev->dev, "octeon"); if (!hcd) diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 31d3a12eb48..f253214741b 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -14,12 +14,21 @@ * This file is licenced under the GPL. */ -#include <linux/signal.h> -#include <linux/jiffies.h> -#include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/usb/otg.h> +#include <linux/platform_device.h> +#include <linux/signal.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ohci.h" #include <asm/io.h> #include <asm/mach-types.h> @@ -42,10 +51,7 @@ #define OMAP1510_LB_MMU_RAM_H 0xfffec234 #define OMAP1510_LB_MMU_RAM_L 0xfffec238 - -#ifndef CONFIG_ARCH_OMAP -#error "This file is OMAP bus glue. CONFIG_OMAP must be defined." -#endif +#define DRIVER_DESC "OHCI OMAP driver" #ifdef CONFIG_TPS65010 #include <linux/i2c/tps65010.h> @@ -68,8 +74,9 @@ extern int ocpi_enable(void); static struct clk *usb_host_ck; static struct clk *usb_dc_ck; -static int host_enabled; -static int host_initialized; + +static const char hcd_name[] = "ohci-omap"; +static struct hc_driver __read_mostly ohci_omap_hc_driver; static void omap_ohci_clock_power(int on) { @@ -188,7 +195,7 @@ static void start_hnp(struct ohci_hcd *ohci) /*-------------------------------------------------------------------------*/ -static int ohci_omap_init(struct usb_hcd *hcd) +static int ohci_omap_reset(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); struct omap_usb_config *config = dev_get_platdata(hcd->self.controller); @@ -198,9 +205,9 @@ static int ohci_omap_init(struct usb_hcd *hcd) dev_dbg(hcd->self.controller, "starting USB Controller\n"); if (config->otg) { - ohci_to_hcd(ohci)->self.otg_port = config->otg; + hcd->self.otg_port = config->otg; /* default/minimum OTG power budget: 8 mA */ - ohci_to_hcd(ohci)->power_budget = 8; + hcd->power_budget = 8; } /* boards can use OTG transceivers in non-OTG modes */ @@ -238,9 +245,15 @@ static int ohci_omap_init(struct usb_hcd *hcd) omap_1510_local_bus_init(); } - if ((ret = ohci_init(ohci)) < 0) + ret = ohci_setup(hcd); + if (ret < 0) return ret; + if (config->otg || config->rwc) { + ohci->hc_control = OHCI_CTRL_RWC; + writel(OHCI_CTRL_RWC, &ohci->regs->control); + } + /* board-specific power switching and overcurrent support */ if (machine_is_omap_osk() || machine_is_omap_innovator()) { u32 rh = roothub_a (ohci); @@ -281,14 +294,6 @@ static int ohci_omap_init(struct usb_hcd *hcd) return 0; } -static void ohci_omap_stop(struct usb_hcd *hcd) -{ - dev_dbg(hcd->self.controller, "stopping USB Controller\n"); - ohci_stop(hcd); - omap_ohci_clock_power(0); -} - - /*-------------------------------------------------------------------------*/ /** @@ -304,7 +309,6 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver, { int retval, irq; struct usb_hcd *hcd = 0; - struct ohci_hcd *ohci; if (pdev->num_resources != 2) { printk(KERN_ERR "hcd probe: invalid num_resources: %i\n", @@ -354,12 +358,6 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver, goto err2; } - ohci = hcd_to_ohci(hcd); - ohci_hcd_init(ohci); - - host_initialized = 0; - host_enabled = 1; - irq = platform_get_irq(pdev, 0); if (irq < 0) { retval = -ENXIO; @@ -369,11 +367,6 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver, if (retval) goto err3; - host_initialized = 1; - - if (!host_enabled) - omap_ohci_clock_power(0); - return 0; err3: iounmap(hcd->regs); @@ -402,7 +395,9 @@ err0: static inline void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) { + dev_dbg(hcd->self.controller, "stopping USB Controller\n"); usb_remove_hcd(hcd); + omap_ohci_clock_power(0); if (!IS_ERR_OR_NULL(hcd->phy)) { (void) otg_set_host(hcd->phy->otg, 0); usb_put_phy(hcd->phy); @@ -418,76 +413,6 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static int -ohci_omap_start (struct usb_hcd *hcd) -{ - struct omap_usb_config *config; - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - - if (!host_enabled) - return 0; - config = dev_get_platdata(hcd->self.controller); - if (config->otg || config->rwc) { - ohci->hc_control = OHCI_CTRL_RWC; - writel(OHCI_CTRL_RWC, &ohci->regs->control); - } - - if ((ret = ohci_run (ohci)) < 0) { - dev_err(hcd->self.controller, "can't start\n"); - ohci_stop (hcd); - return ret; - } - return 0; -} - -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ohci_omap_hc_driver = { - .description = hcd_name, - .product_desc = "OMAP OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .reset = ohci_omap_init, - .start = ohci_omap_start, - .stop = ohci_omap_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ - static int ohci_hcd_omap_drv_probe(struct platform_device *dev) { return usb_hcd_omap_probe(&ohci_omap_hc_driver, dev); @@ -506,16 +431,23 @@ static int ohci_hcd_omap_drv_remove(struct platform_device *dev) #ifdef CONFIG_PM -static int ohci_omap_suspend(struct platform_device *dev, pm_message_t message) +static int ohci_omap_suspend(struct platform_device *pdev, pm_message_t message) { - struct ohci_hcd *ohci = hcd_to_ohci(platform_get_drvdata(dev)); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + bool do_wakeup = device_may_wakeup(&pdev->dev); + int ret; if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; + ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + omap_ohci_clock_power(0); - return 0; + return ret; } static int ohci_omap_resume(struct platform_device *dev) @@ -553,4 +485,29 @@ static struct platform_driver ohci_hcd_omap_driver = { }, }; +static const struct ohci_driver_overrides omap_overrides __initconst = { + .product_desc = "OMAP OHCI", + .reset = ohci_omap_reset +}; + +static int __init ohci_omap_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ohci_init_driver(&ohci_omap_hc_driver, &omap_overrides); + return platform_driver_register(&ohci_hcd_omap_driver); +} +module_init(ohci_omap_init); + +static void __exit ohci_omap_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_omap_driver); +} +module_exit(ohci_omap_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_ALIAS("platform:ohci"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index a09af26f69e..21457417a85 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -29,90 +29,22 @@ * - add kernel-doc */ +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/usb/otg.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> -#include <linux/of.h> -#include <linux/dma-mapping.h> - -/*-------------------------------------------------------------------------*/ - -static int ohci_omap3_init(struct usb_hcd *hcd) -{ - dev_dbg(hcd->self.controller, "starting OHCI controller\n"); - - return ohci_init(hcd_to_ohci(hcd)); -} - -/*-------------------------------------------------------------------------*/ - -static int ohci_omap3_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - /* - * RemoteWakeupConnected has to be set explicitly before - * calling ohci_run. The reset value of RWC is 0. - */ - ohci->hc_control = OHCI_CTRL_RWC; - writel(OHCI_CTRL_RWC, &ohci->regs->control); - - ret = ohci_run(ohci); - - if (ret < 0) { - dev_err(hcd->self.controller, "can't start\n"); - ohci_stop(hcd); - } - - return ret; -} - -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ohci_omap3_hc_driver = { - .description = hcd_name, - .product_desc = "OMAP3 OHCI Host Controller", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .reset = ohci_omap3_init, - .start = ohci_omap3_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, +#include <linux/usb.h> +#include <linux/usb/hcd.h> - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, +#include "ohci.h" - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; +#define DRIVER_DESC "OHCI OMAP3 driver" -/*-------------------------------------------------------------------------*/ +static const char hcd_name[] = "ohci-omap3"; +static struct hc_driver __read_mostly ohci_omap3_hc_driver; /* * configure so an HC device and id are always provided @@ -129,10 +61,11 @@ static const struct hc_driver ohci_omap3_hc_driver = { static int ohci_hcd_omap3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + struct ohci_hcd *ohci; struct usb_hcd *hcd = NULL; void __iomem *regs = NULL; struct resource *res; - int ret = -ENODEV; + int ret; int irq; if (usb_disabled()) @@ -166,11 +99,11 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - if (!dev->coherent_dma_mask) - dev->coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) + goto err_io; + ret = -ENODEV; hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev, dev_name(dev)); if (!hcd) { @@ -185,7 +118,12 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) pm_runtime_enable(dev); pm_runtime_get_sync(dev); - ohci_hcd_init(hcd_to_ohci(hcd)); + ohci = hcd_to_ohci(hcd); + /* + * RemoteWakeupConnected has to be set explicitly before + * calling ohci_run. The reset value of RWC is 0. + */ + ohci->hc_control = OHCI_CTRL_RWC; ret = usb_add_hcd(hcd, irq, 0); if (ret) { @@ -248,5 +186,25 @@ static struct platform_driver ohci_hcd_omap3_driver = { }, }; +static int __init ohci_omap3_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ohci_init_driver(&ohci_omap3_hc_driver, NULL); + return platform_driver_register(&ohci_hcd_omap3_driver); +} +module_init(ohci_omap3_init); + +static void __exit ohci_omap3_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_omap3_driver); +} +module_exit(ohci_omap3_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_ALIAS("platform:ohci-omap3"); MODULE_AUTHOR("Anand Gadiyar <gadiyar@ti.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index ec337c2bd5e..90879e9ccbe 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -150,28 +150,16 @@ static int ohci_quirk_nec(struct usb_hcd *hcd) static int ohci_quirk_amd700(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); - struct pci_dev *amd_smbus_dev; - u8 rev; if (usb_amd_find_chipset_info()) ohci->flags |= OHCI_QUIRK_AMD_PLL; - amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, - PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); - if (!amd_smbus_dev) - return 0; - - rev = amd_smbus_dev->revision; - /* SB800 needs pre-fetch fix */ - if ((rev >= 0x40) && (rev <= 0x4f)) { + if (usb_amd_prefetch_quirk()) { ohci->flags |= OHCI_QUIRK_AMD_PREFETCH; ohci_dbg(ohci, "enabled AMD prefetch quirk\n"); } - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - return 0; } @@ -323,3 +311,4 @@ module_exit(ohci_pci_cleanup); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); +MODULE_SOFTDEP("pre: ehci_pci"); diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index a4c6410f0ed..f351ff5b171 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -139,14 +139,21 @@ static int ohci_platform_remove(struct platform_device *dev) static int ohci_platform_suspend(struct device *dev) { - struct usb_ohci_pdata *pdata = dev_get_platdata(dev); + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct usb_ohci_pdata *pdata = dev->platform_data; struct platform_device *pdev = container_of(dev, struct platform_device, dev); + bool do_wakeup = device_may_wakeup(dev); + int ret; + + ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; if (pdata->power_suspend) pdata->power_suspend(pdev); - return 0; + return ret; } static int ohci_platform_resume(struct device *dev) diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 75f5a1e2f01..81f3eba215c 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -14,6 +14,8 @@ */ #include <linux/signal.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/prom.h> diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 93371a235e8..e89ac4d4b87 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -19,15 +19,26 @@ * This file is licenced under the GPL. */ -#include <linux/device.h> -#include <linux/signal.h> -#include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of_platform.h> #include <linux/of_gpio.h> -#include <mach/hardware.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/usb-pxa3xx-ulpi.h> +#include <linux/platform_device.h> +#include <linux/signal.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/usb/otg.h> + +#include <mach/hardware.h> + +#include "ohci.h" + +#define DRIVER_DESC "OHCI PXA27x/PXA3x driver" /* * UHC: USB Host Controller (OHCI-like) register definitions @@ -101,16 +112,16 @@ #define PXA_UHC_MAX_PORTNUM 3 -struct pxa27x_ohci { - /* must be 1st member here for hcd_to_ohci() to work */ - struct ohci_hcd ohci; +static const char hcd_name[] = "ohci-pxa27x"; - struct device *dev; +static struct hc_driver __read_mostly ohci_pxa27x_hc_driver; + +struct pxa27x_ohci { struct clk *clk; void __iomem *mmio_base; }; -#define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)hcd_to_ohci(hcd) +#define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)(hcd_to_ohci(hcd)->priv) /* PMM_NPS_MODE -- PMM Non-power switching mode @@ -122,10 +133,10 @@ struct pxa27x_ohci { PMM_PERPORT_MODE -- PMM per port switching mode Ports are powered individually. */ -static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *ohci, int mode) +static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *pxa_ohci, int mode) { - uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA); - uint32_t uhcrhdb = __raw_readl(ohci->mmio_base + UHCRHDB); + uint32_t uhcrhda = __raw_readl(pxa_ohci->mmio_base + UHCRHDA); + uint32_t uhcrhdb = __raw_readl(pxa_ohci->mmio_base + UHCRHDB); switch (mode) { case PMM_NPS_MODE: @@ -149,20 +160,18 @@ static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *ohci, int mode) uhcrhda |= RH_A_NPS; } - __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA); - __raw_writel(uhcrhdb, ohci->mmio_base + UHCRHDB); + __raw_writel(uhcrhda, pxa_ohci->mmio_base + UHCRHDA); + __raw_writel(uhcrhdb, pxa_ohci->mmio_base + UHCRHDB); return 0; } -extern int usb_disabled(void); - /*-------------------------------------------------------------------------*/ -static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci, +static inline void pxa27x_setup_hc(struct pxa27x_ohci *pxa_ohci, struct pxaohci_platform_data *inf) { - uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR); - uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA); + uint32_t uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR); + uint32_t uhcrhda = __raw_readl(pxa_ohci->mmio_base + UHCRHDA); if (inf->flags & ENABLE_PORT1) uhchr &= ~UHCHR_SSEP1; @@ -194,17 +203,17 @@ static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci, uhcrhda |= UHCRHDA_POTPGT(inf->power_on_delay / 2); } - __raw_writel(uhchr, ohci->mmio_base + UHCHR); - __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA); + __raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR); + __raw_writel(uhcrhda, pxa_ohci->mmio_base + UHCRHDA); } -static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci) +static inline void pxa27x_reset_hc(struct pxa27x_ohci *pxa_ohci) { - uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR); + uint32_t uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR); - __raw_writel(uhchr | UHCHR_FHR, ohci->mmio_base + UHCHR); + __raw_writel(uhchr | UHCHR_FHR, pxa_ohci->mmio_base + UHCHR); udelay(11); - __raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR); + __raw_writel(uhchr & ~UHCHR_FHR, pxa_ohci->mmio_base + UHCHR); } #ifdef CONFIG_PXA27x @@ -213,25 +222,26 @@ extern void pxa27x_clear_otgph(void); #define pxa27x_clear_otgph() do {} while (0) #endif -static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev) +static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev) { int retval = 0; struct pxaohci_platform_data *inf; uint32_t uhchr; + struct usb_hcd *hcd = dev_get_drvdata(dev); inf = dev_get_platdata(dev); - clk_prepare_enable(ohci->clk); + clk_prepare_enable(pxa_ohci->clk); - pxa27x_reset_hc(ohci); + pxa27x_reset_hc(pxa_ohci); - uhchr = __raw_readl(ohci->mmio_base + UHCHR) | UHCHR_FSBIR; - __raw_writel(uhchr, ohci->mmio_base + UHCHR); + uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR) | UHCHR_FSBIR; + __raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR); - while (__raw_readl(ohci->mmio_base + UHCHR) & UHCHR_FSBIR) + while (__raw_readl(pxa_ohci->mmio_base + UHCHR) & UHCHR_FSBIR) cpu_relax(); - pxa27x_setup_hc(ohci, inf); + pxa27x_setup_hc(pxa_ohci, inf); if (inf->init) retval = inf->init(dev); @@ -240,38 +250,39 @@ static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev) return retval; if (cpu_is_pxa3xx()) - pxa3xx_u2d_start_hc(&ohci_to_hcd(&ohci->ohci)->self); + pxa3xx_u2d_start_hc(&hcd->self); - uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE; - __raw_writel(uhchr, ohci->mmio_base + UHCHR); - __raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE); + uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR) & ~UHCHR_SSE; + __raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR); + __raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, pxa_ohci->mmio_base + UHCHIE); /* Clear any OTG Pin Hold */ pxa27x_clear_otgph(); return 0; } -static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev) +static void pxa27x_stop_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev) { struct pxaohci_platform_data *inf; + struct usb_hcd *hcd = dev_get_drvdata(dev); uint32_t uhccoms; inf = dev_get_platdata(dev); if (cpu_is_pxa3xx()) - pxa3xx_u2d_stop_hc(&ohci_to_hcd(&ohci->ohci)->self); + pxa3xx_u2d_stop_hc(&hcd->self); if (inf->exit) inf->exit(dev); - pxa27x_reset_hc(ohci); + pxa27x_reset_hc(pxa_ohci); /* Host Controller Reset */ - uhccoms = __raw_readl(ohci->mmio_base + UHCCOMS) | 0x01; - __raw_writel(uhccoms, ohci->mmio_base + UHCCOMS); + uhccoms = __raw_readl(pxa_ohci->mmio_base + UHCCOMS) | 0x01; + __raw_writel(uhccoms, pxa_ohci->mmio_base + UHCCOMS); udelay(10); - clk_disable_unprepare(ohci->clk); + clk_disable_unprepare(pxa_ohci->clk); } #ifdef CONFIG_OF @@ -287,6 +298,7 @@ static int ohci_pxa_of_init(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct pxaohci_platform_data *pdata; u32 tmp; + int ret; if (!np) return 0; @@ -295,10 +307,9 @@ static int ohci_pxa_of_init(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -356,7 +367,8 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device int retval, irq; struct usb_hcd *hcd; struct pxaohci_platform_data *inf; - struct pxa27x_ohci *ohci; + struct pxa27x_ohci *pxa_ohci; + struct ohci_hcd *ohci; struct resource *r; struct clk *usb_clk; @@ -409,29 +421,31 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device } /* initialize "struct pxa27x_ohci" */ - ohci = (struct pxa27x_ohci *)hcd_to_ohci(hcd); - ohci->dev = &pdev->dev; - ohci->clk = usb_clk; - ohci->mmio_base = (void __iomem *)hcd->regs; + pxa_ohci = to_pxa27x_ohci(hcd); + pxa_ohci->clk = usb_clk; + pxa_ohci->mmio_base = (void __iomem *)hcd->regs; - if ((retval = pxa27x_start_hc(ohci, &pdev->dev)) < 0) { + retval = pxa27x_start_hc(pxa_ohci, &pdev->dev); + if (retval < 0) { pr_debug("pxa27x_start_hc failed"); goto err3; } /* Select Power Management Mode */ - pxa27x_ohci_select_pmm(ohci, inf->port_mode); + pxa27x_ohci_select_pmm(pxa_ohci, inf->port_mode); if (inf->power_budget) hcd->power_budget = inf->power_budget; - ohci_hcd_init(hcd_to_ohci(hcd)); + /* The value of NDP in roothub_a is incorrect on this hardware */ + ohci = hcd_to_ohci(hcd); + ohci->num_ports = 3; retval = usb_add_hcd(hcd, irq, 0); if (retval == 0) return retval; - pxa27x_stop_hc(ohci, &pdev->dev); + pxa27x_stop_hc(pxa_ohci, &pdev->dev); err3: iounmap(hcd->regs); err2: @@ -459,88 +473,18 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device */ void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) { - struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); + struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd); usb_remove_hcd(hcd); - pxa27x_stop_hc(ohci, &pdev->dev); + pxa27x_stop_hc(pxa_ohci, &pdev->dev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + clk_put(pxa_ohci->clk); usb_put_hcd(hcd); - clk_put(ohci->clk); } /*-------------------------------------------------------------------------*/ -static int -ohci_pxa27x_start (struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - - ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci); - - /* The value of NDP in roothub_a is incorrect on this hardware */ - ohci->num_ports = 3; - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run (ohci)) < 0) { - dev_err(hcd->self.controller, "can't start %s", - hcd->self.bus_name); - ohci_stop (hcd); - return ret; - } - - return 0; -} - -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ohci_pxa27x_hc_driver = { - .description = hcd_name, - .product_desc = "PXA27x OHCI", - .hcd_priv_size = sizeof(struct pxa27x_ohci), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_pxa27x_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ - static int ohci_hcd_pxa27x_drv_probe(struct platform_device *pdev) { pr_debug ("In ohci_hcd_pxa27x_drv_probe"); @@ -563,32 +507,42 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) static int ohci_hcd_pxa27x_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); + struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + bool do_wakeup = device_may_wakeup(dev); + int ret; + - if (time_before(jiffies, ohci->ohci.next_statechange)) + if (time_before(jiffies, ohci->next_statechange)) msleep(5); - ohci->ohci.next_statechange = jiffies; + ohci->next_statechange = jiffies; - pxa27x_stop_hc(ohci, dev); - return 0; + ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + + pxa27x_stop_hc(pxa_ohci, dev); + return ret; } static int ohci_hcd_pxa27x_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); + struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd); struct pxaohci_platform_data *inf = dev_get_platdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); int status; - if (time_before(jiffies, ohci->ohci.next_statechange)) + if (time_before(jiffies, ohci->next_statechange)) msleep(5); - ohci->ohci.next_statechange = jiffies; + ohci->next_statechange = jiffies; - if ((status = pxa27x_start_hc(ohci, dev)) < 0) + status = pxa27x_start_hc(pxa_ohci, dev); + if (status < 0) return status; /* Select Power Management Mode */ - pxa27x_ohci_select_pmm(ohci, inf->port_mode); + pxa27x_ohci_select_pmm(pxa_ohci, inf->port_mode); ohci_resume(hcd, false); return 0; @@ -600,9 +554,6 @@ static const struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = { }; #endif -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:pxa27x-ohci"); - static struct platform_driver ohci_hcd_pxa27x_driver = { .probe = ohci_hcd_pxa27x_drv_probe, .remove = ohci_hcd_pxa27x_drv_remove, @@ -617,3 +568,27 @@ static struct platform_driver ohci_hcd_pxa27x_driver = { }, }; +static const struct ohci_driver_overrides pxa27x_overrides __initconst = { + .extra_priv_size = sizeof(struct pxa27x_ohci), +}; + +static int __init ohci_pxa27x_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ohci_init_driver(&ohci_pxa27x_hc_driver, &pxa27x_overrides); + return platform_driver_register(&ohci_hcd_pxa27x_driver); +} +module_init(ohci_pxa27x_init); + +static void __exit ohci_pxa27x_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_pxa27x_driver); +} +module_exit(ohci_pxa27x_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa27x-ohci"); diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index df4a6707322..e7f577e6362 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -41,9 +41,13 @@ finish_urb(struct ohci_hcd *ohci, struct urb *urb, int status) __releases(ohci->lock) __acquires(ohci->lock) { - struct device *dev = ohci_to_hcd(ohci)->self.controller; + struct device *dev = ohci_to_hcd(ohci)->self.controller; + struct usb_host_endpoint *ep = urb->ep; + struct urb_priv *urb_priv; + // ASSERT (urb->hcpriv != 0); + restart: urb_free_priv (ohci, urb->hcpriv); urb->hcpriv = NULL; if (likely(status == -EINPROGRESS)) @@ -80,6 +84,21 @@ __acquires(ohci->lock) ohci->hc_control &= ~(OHCI_CTRL_PLE|OHCI_CTRL_IE); ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); } + + /* + * An isochronous URB that is sumitted too late won't have any TDs + * (marked by the fact that the td_cnt value is larger than the + * actual number of TDs). If the next URB on this endpoint is like + * that, give it back now. + */ + if (!list_empty(&ep->urb_list)) { + urb = list_first_entry(&ep->urb_list, struct urb, urb_list); + urb_priv = urb->hcpriv; + if (urb_priv->td_cnt > urb_priv->length) { + status = 0; + goto restart; + } + } } @@ -546,7 +565,6 @@ td_fill (struct ohci_hcd *ohci, u32 info, td->hwCBP = cpu_to_hc32 (ohci, data & 0xFFFFF000); *ohci_hwPSWp(ohci, td, 0) = cpu_to_hc16 (ohci, (data & 0x0FFF) | 0xE000); - td->ed->last_iso = info & 0xffff; } else { td->hwCBP = cpu_to_hc32 (ohci, data); } @@ -996,7 +1014,7 @@ rescan_this: urb_priv->td_cnt++; /* if URB is done, clean up */ - if (urb_priv->td_cnt == urb_priv->length) { + if (urb_priv->td_cnt >= urb_priv->length) { modified = completed = 1; finish_urb(ohci, urb, 0); } @@ -1086,7 +1104,7 @@ static void takeback_td(struct ohci_hcd *ohci, struct td *td) urb_priv->td_cnt++; /* If all this urb's TDs are done, call complete() */ - if (urb_priv->td_cnt == urb_priv->length) + if (urb_priv->td_cnt >= urb_priv->length) finish_urb(ohci, urb, status); /* clean schedule: unlink EDs that are no longer busy */ diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 4919afa4125..f90101b9cdb 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -19,19 +19,36 @@ * This file is licenced under the GPL. */ -#include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> #include <linux/platform_data/usb-ohci-s3c2410.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ohci.h" + #define valid_port(idx) ((idx) == 1 || (idx) == 2) /* clock device associated with the hcd */ + +#define DRIVER_DESC "OHCI S3C2410 driver" + +static const char hcd_name[] = "ohci-s3c2410"; + static struct clk *clk; static struct clk *usb_clk; /* forward definitions */ +static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, + u16 wValue, u16 wIndex, char *buf, u16 wLength); +static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); + static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); /* conversion functions */ @@ -47,10 +64,10 @@ static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd) dev_dbg(&dev->dev, "s3c2410_start_hc:\n"); - clk_enable(usb_clk); + clk_prepare_enable(usb_clk); mdelay(2); /* let the bus clock stabilise */ - clk_enable(clk); + clk_prepare_enable(clk); if (info != NULL) { info->hcd = hcd; @@ -75,8 +92,8 @@ static void s3c2410_stop_hc(struct platform_device *dev) (info->enable_oc)(info, 0); } - clk_disable(clk); - clk_disable(usb_clk); + clk_disable_unprepare(clk); + clk_disable_unprepare(usb_clk); } /* ohci_s3c2410_hub_status_data @@ -93,7 +110,7 @@ ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf) int orig; int portno; - orig = ohci_hub_status_data(hcd, buf); + orig = orig_ohci_hub_status_data(hcd, buf); if (info == NULL) return orig; @@ -164,7 +181,7 @@ static int ohci_s3c2410_hub_control( * process the request straight away and exit */ if (info == NULL) { - ret = ohci_hub_control(hcd, typeReq, wValue, + ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); goto out; } @@ -214,7 +231,7 @@ static int ohci_s3c2410_hub_control( break; } - ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); + ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); if (ret) goto out; @@ -374,8 +391,6 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver, s3c2410_start_hc(dev, hcd); - ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, dev->resource[1].start, 0); if (retval != 0) goto err_ioremap; @@ -392,71 +407,7 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver, /*-------------------------------------------------------------------------*/ -static int -ohci_s3c2410_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - ret = ohci_init(ohci); - if (ret < 0) - return ret; - - ret = ohci_run(ohci); - if (ret < 0) { - dev_err(hcd->self.controller, "can't start %s\n", - hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - - return 0; -} - - -static const struct hc_driver ohci_s3c2410_hc_driver = { - .description = hcd_name, - .product_desc = "S3C24XX OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_s3c2410_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_s3c2410_hub_status_data, - .hub_control = ohci_s3c2410_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/* device driver */ +static struct hc_driver __read_mostly ohci_s3c2410_hc_driver; static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev) { @@ -533,4 +484,39 @@ static struct platform_driver ohci_hcd_s3c2410_driver = { }, }; +static int __init ohci_s3c2410_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ohci_init_driver(&ohci_s3c2410_hc_driver, NULL); + + /* + * The Samsung HW has some unusual quirks, which require + * Sumsung-specific workarounds. We override certain hc_driver + * functions here to achieve that. We explicitly do not enhance + * ohci_driver_overrides to allow this more easily, since this + * is an unusual case, and we don't want to encourage others to + * override these functions by making it too easy. + */ + + orig_ohci_hub_control = ohci_s3c2410_hc_driver.hub_control; + orig_ohci_hub_status_data = ohci_s3c2410_hc_driver.hub_status_data; + + ohci_s3c2410_hc_driver.hub_status_data = ohci_s3c2410_hub_status_data; + ohci_s3c2410_hc_driver.hub_control = ohci_s3c2410_hub_control; + + return platform_driver_register(&ohci_hcd_s3c2410_driver); +} +module_init(ohci_s3c2410_init); + +static void __exit ohci_s3c2410_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_s3c2410_driver); +} +module_exit(ohci_s3c2410_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:s3c2410-ohci"); diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 17b2a7dad77..aa9e127bbe7 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -185,6 +185,12 @@ static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev) if (usb_disabled()) return -ENODEV; + /* + * We don't call dma_set_mask_and_coherent() here because the + * DMA mask has already been appropraitely setup by the core + * SA-1111 bus code (which includes bug workarounds.) + */ + hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111"); if (!hcd) return -ENOMEM; diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index d479d5ddab8..2a5de5fecd8 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -216,14 +216,21 @@ static int ohci_hcd_sm501_drv_remove(struct platform_device *pdev) static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg) { struct device *dev = &pdev->dev; - struct ohci_hcd *ohci = hcd_to_ohci(platform_get_drvdata(pdev)); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + bool do_wakeup = device_may_wakeup(dev); + int ret; if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; + ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0); - return 0; + return ret; } static int ohci_sm501_resume(struct platform_device *pdev) diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index cc9dd9e4f05..6b02107d281 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -11,92 +11,37 @@ * warranty of any kind, whether express or implied. */ -#include <linux/signal.h> -#include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/signal.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ohci.h" +#define DRIVER_DESC "OHCI SPEAr driver" + +static const char hcd_name[] = "SPEAr-ohci"; struct spear_ohci { - struct ohci_hcd ohci; struct clk *clk; }; -#define to_spear_ohci(hcd) (struct spear_ohci *)hcd_to_ohci(hcd) - -static void spear_start_ohci(struct spear_ohci *ohci) -{ - clk_prepare_enable(ohci->clk); -} - -static void spear_stop_ohci(struct spear_ohci *ohci) -{ - clk_disable_unprepare(ohci->clk); -} - -static int ohci_spear_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - ret = ohci_init(ohci); - if (ret < 0) - return ret; - ohci->regs = hcd->regs; - - ret = ohci_run(ohci); - if (ret < 0) { - dev_err(hcd->self.controller, "can't start\n"); - ohci_stop(hcd); - return ret; - } +#define to_spear_ohci(hcd) (struct spear_ohci *)(hcd_to_ohci(hcd)->priv) - create_debug_files(ohci); - -#ifdef DEBUG - ohci_dump(ohci, 1); -#endif - return 0; -} - -static const struct hc_driver ohci_spear_hc_driver = { - .description = hcd_name, - .product_desc = "SPEAr OHCI", - .hcd_priv_size = sizeof(struct spear_ohci), - - /* generic hardware linkage */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* basic lifecycle operations */ - .start = ohci_spear_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - - /* managing i/o requests and associated device resources */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* scheduling support */ - .get_frame_number = ohci_get_frame, - - /* root hub support */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, - - .start_port_reset = ohci_start_port_reset, -}; +static struct hc_driver __read_mostly ohci_spear_hc_driver; static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) { const struct hc_driver *driver = &ohci_spear_hc_driver; + struct ohci_hcd *ohci; struct usb_hcd *hcd = NULL; struct clk *usbh_clk; - struct spear_ohci *ohci_p; + struct spear_ohci *sohci_p; struct resource *res; int retval, irq; @@ -111,10 +56,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (retval) + goto fail; usbh_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(usbh_clk)) { @@ -151,16 +95,18 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) goto err_put_hcd; } - ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd); - ohci_p->clk = usbh_clk; - spear_start_ohci(ohci_p); - ohci_hcd_init(hcd_to_ohci(hcd)); + sohci_p = to_spear_ohci(hcd); + sohci_p->clk = usbh_clk; + + clk_prepare_enable(sohci_p->clk); + + ohci = hcd_to_ohci(hcd); retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), 0); if (retval == 0) return retval; - spear_stop_ohci(ohci_p); + clk_disable_unprepare(sohci_p->clk); err_put_hcd: usb_put_hcd(hcd); fail: @@ -172,11 +118,11 @@ fail: static int spear_ohci_hcd_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct spear_ohci *ohci_p = to_spear_ohci(hcd); + struct spear_ohci *sohci_p = to_spear_ohci(hcd); usb_remove_hcd(hcd); - if (ohci_p->clk) - spear_stop_ohci(ohci_p); + if (sohci_p->clk) + clk_disable_unprepare(sohci_p->clk); usb_put_hcd(hcd); return 0; @@ -188,13 +134,14 @@ static int spear_ohci_hcd_drv_suspend(struct platform_device *dev, { struct usb_hcd *hcd = platform_get_drvdata(dev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); - struct spear_ohci *ohci_p = to_spear_ohci(hcd); + struct spear_ohci *sohci_p = to_spear_ohci(hcd); if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; - spear_stop_ohci(ohci_p); + clk_disable_unprepare(sohci_p->clk); + return 0; } @@ -202,13 +149,13 @@ static int spear_ohci_hcd_drv_resume(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); - struct spear_ohci *ohci_p = to_spear_ohci(hcd); + struct spear_ohci *sohci_p = to_spear_ohci(hcd); if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; - spear_start_ohci(ohci_p); + clk_prepare_enable(sohci_p->clk); ohci_resume(hcd, false); return 0; } @@ -234,4 +181,28 @@ static struct platform_driver spear_ohci_hcd_driver = { }, }; +static const struct ohci_driver_overrides spear_overrides __initconst = { + .extra_priv_size = sizeof(struct spear_ohci), +}; +static int __init ohci_spear_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ohci_init_driver(&ohci_spear_hc_driver, &spear_overrides); + return platform_driver_register(&spear_ohci_hcd_driver); +} +module_init(ohci_spear_init); + +static void __exit ohci_spear_cleanup(void) +{ + platform_driver_unregister(&spear_ohci_hcd_driver); +} +module_exit(ohci_spear_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Deepak Sikri"); +MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:spear-ohci"); diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 2c76ef1320e..dfbdd3aefe9 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -79,11 +79,30 @@ #define USB_INTEL_USB3_PSSEN 0xD8 #define USB_INTEL_USB3PRM 0xDC +/* + * amd_chipset_gen values represent AMD different chipset generations + */ +enum amd_chipset_gen { + NOT_AMD_CHIPSET = 0, + AMD_CHIPSET_SB600, + AMD_CHIPSET_SB700, + AMD_CHIPSET_SB800, + AMD_CHIPSET_HUDSON2, + AMD_CHIPSET_BOLTON, + AMD_CHIPSET_YANGTZE, + AMD_CHIPSET_UNKNOWN, +}; + +struct amd_chipset_type { + enum amd_chipset_gen gen; + u8 rev; +}; + static struct amd_chipset_info { struct pci_dev *nb_dev; struct pci_dev *smbus_dev; int nb_type; - int sb_type; + struct amd_chipset_type sb_type; int isoc_reqs; int probe_count; int probe_result; @@ -91,6 +110,51 @@ static struct amd_chipset_info { static DEFINE_SPINLOCK(amd_lock); +/* + * amd_chipset_sb_type_init - initialize amd chipset southbridge type + * + * AMD FCH/SB generation and revision is identified by SMBus controller + * vendor, device and revision IDs. + * + * Returns: 1 if it is an AMD chipset, 0 otherwise. + */ +static int amd_chipset_sb_type_init(struct amd_chipset_info *pinfo) +{ + u8 rev = 0; + pinfo->sb_type.gen = AMD_CHIPSET_UNKNOWN; + + pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, + PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); + if (pinfo->smbus_dev) { + rev = pinfo->smbus_dev->revision; + if (rev >= 0x10 && rev <= 0x1f) + pinfo->sb_type.gen = AMD_CHIPSET_SB600; + else if (rev >= 0x30 && rev <= 0x3f) + pinfo->sb_type.gen = AMD_CHIPSET_SB700; + else if (rev >= 0x40 && rev <= 0x4f) + pinfo->sb_type.gen = AMD_CHIPSET_SB800; + } else { + pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL); + + if (!pinfo->smbus_dev) { + pinfo->sb_type.gen = NOT_AMD_CHIPSET; + return 0; + } + + rev = pinfo->smbus_dev->revision; + if (rev >= 0x11 && rev <= 0x14) + pinfo->sb_type.gen = AMD_CHIPSET_HUDSON2; + else if (rev >= 0x15 && rev <= 0x18) + pinfo->sb_type.gen = AMD_CHIPSET_BOLTON; + else if (rev >= 0x39 && rev <= 0x3a) + pinfo->sb_type.gen = AMD_CHIPSET_YANGTZE; + } + + pinfo->sb_type.rev = rev; + return 1; +} + void sb800_prefetch(struct device *dev, int on) { u16 misc; @@ -106,7 +170,6 @@ EXPORT_SYMBOL_GPL(sb800_prefetch); int usb_amd_find_chipset_info(void) { - u8 rev = 0; unsigned long flags; struct amd_chipset_info info; int ret; @@ -122,27 +185,17 @@ int usb_amd_find_chipset_info(void) memset(&info, 0, sizeof(info)); spin_unlock_irqrestore(&amd_lock, flags); - info.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL); - if (info.smbus_dev) { - rev = info.smbus_dev->revision; - if (rev >= 0x40) - info.sb_type = 1; - else if (rev >= 0x30 && rev <= 0x3b) - info.sb_type = 3; - } else { - info.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, - 0x780b, NULL); - if (!info.smbus_dev) { - ret = 0; - goto commit; - } - - rev = info.smbus_dev->revision; - if (rev >= 0x11 && rev <= 0x18) - info.sb_type = 2; + if (!amd_chipset_sb_type_init(&info)) { + ret = 0; + goto commit; } - if (info.sb_type == 0) { + /* Below chipset generations needn't enable AMD PLL quirk */ + if (info.sb_type.gen == AMD_CHIPSET_UNKNOWN || + info.sb_type.gen == AMD_CHIPSET_SB600 || + info.sb_type.gen == AMD_CHIPSET_YANGTZE || + (info.sb_type.gen == AMD_CHIPSET_SB700 && + info.sb_type.rev > 0x3b)) { if (info.smbus_dev) { pci_dev_put(info.smbus_dev); info.smbus_dev = NULL; @@ -197,6 +250,39 @@ commit: } EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info); +int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev) +{ + /* Make sure amd chipset type has already been initialized */ + usb_amd_find_chipset_info(); + if (amd_chipset.sb_type.gen != AMD_CHIPSET_YANGTZE) + return 0; + + dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n"); + return 1; +} +EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk); + +bool usb_amd_hang_symptom_quirk(void) +{ + u8 rev; + + usb_amd_find_chipset_info(); + rev = amd_chipset.sb_type.rev; + /* SB600 and old version of SB700 have hang symptom bug */ + return amd_chipset.sb_type.gen == AMD_CHIPSET_SB600 || + (amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 && + rev >= 0x3a && rev <= 0x3b); +} +EXPORT_SYMBOL_GPL(usb_amd_hang_symptom_quirk); + +bool usb_amd_prefetch_quirk(void) +{ + usb_amd_find_chipset_info(); + /* SB800 needs pre-fetch fix */ + return amd_chipset.sb_type.gen == AMD_CHIPSET_SB800; +} +EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk); + /* * The hardware normally enables the A-link power management feature, which * lets the system lower the power consumption in idle states. @@ -229,7 +315,9 @@ static void usb_amd_quirk_pll(int disable) } } - if (amd_chipset.sb_type == 1 || amd_chipset.sb_type == 2) { + if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB800 || + amd_chipset.sb_type.gen == AMD_CHIPSET_HUDSON2 || + amd_chipset.sb_type.gen == AMD_CHIPSET_BOLTON) { outb_p(AB_REG_BAR_LOW, 0xcd6); addr_low = inb_p(0xcd7); outb_p(AB_REG_BAR_HIGH, 0xcd6); @@ -240,7 +328,8 @@ static void usb_amd_quirk_pll(int disable) outl_p(0x40, AB_DATA(addr)); outl_p(0x34, AB_INDX(addr)); val = inl_p(AB_DATA(addr)); - } else if (amd_chipset.sb_type == 3) { + } else if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 && + amd_chipset.sb_type.rev <= 0x3b) { pci_read_config_dword(amd_chipset.smbus_dev, AB_REG_BAR_SB700, &addr); outl(AX_INDXC, AB_INDX(addr)); @@ -353,7 +442,7 @@ void usb_amd_dev_put(void) amd_chipset.nb_dev = NULL; amd_chipset.smbus_dev = NULL; amd_chipset.nb_type = 0; - amd_chipset.sb_type = 0; + memset(&amd_chipset.sb_type, 0, sizeof(amd_chipset.sb_type)); amd_chipset.isoc_reqs = 0; amd_chipset.probe_result = 0; @@ -799,7 +888,7 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) * switchable ports. */ pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, - cpu_to_le32(ports_available)); + ports_available); pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, &ports_available); @@ -821,7 +910,7 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) * host. */ pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, - cpu_to_le32(ports_available)); + ports_available); pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, &ports_available); diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index ed6700d00fe..638e88f7a28 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -5,6 +5,8 @@ void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); int usb_amd_find_chipset_info(void); +bool usb_amd_hang_symptom_quirk(void); +bool usb_amd_prefetch_quirk(void); void usb_amd_dev_put(void); void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 5477bf5df21..79620c39217 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1413,7 +1413,7 @@ static int sl811h_show(struct seq_file *s, void *unused) case SL11H_CTL1MASK_SE0: s = " se0/reset"; break; case SL11H_CTL1MASK_K: s = " k/resume"; break; default: s = "j"; break; - }; s; }), + } s; }), (t & SL11H_CTL1MASK_LSPD) ? " lowspeed" : "", (t & SL11H_CTL1MASK_SUSPEND) ? " suspend" : ""); @@ -1446,7 +1446,7 @@ static int sl811h_show(struct seq_file *s, void *unused) case USB_PID_SETUP: s = "setup"; break; case USB_PID_ACK: s = "status"; break; default: s = "?"; break; - }; s;}), + } s;}), ep->maxpacket, ep->nak_count, ep->error_count); list_for_each_entry (urb, &ep->hep->urb_list, urb_list) { diff --git a/drivers/usb/host/ssb-hcd.c b/drivers/usb/host/ssb-hcd.c index 74af2c6287d..0196f766df7 100644 --- a/drivers/usb/host/ssb-hcd.c +++ b/drivers/usb/host/ssb-hcd.c @@ -163,8 +163,7 @@ static int ssb_hcd_probe(struct ssb_device *dev, /* TODO: Probably need checks here; is the core connected? */ - if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || - dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) + if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32))) return -EOPNOTSUPP; usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL); diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 45573754652..8e239cdd95d 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -310,14 +310,14 @@ static int uhci_show_status(struct uhci_hcd *uhci, char *buf, int len) unsigned short portsc1, portsc2; - usbcmd = uhci_readw(uhci, 0); - usbstat = uhci_readw(uhci, 2); - usbint = uhci_readw(uhci, 4); - usbfrnum = uhci_readw(uhci, 6); - flbaseadd = uhci_readl(uhci, 8); - sof = uhci_readb(uhci, 12); - portsc1 = uhci_readw(uhci, 16); - portsc2 = uhci_readw(uhci, 18); + usbcmd = uhci_readw(uhci, USBCMD); + usbstat = uhci_readw(uhci, USBSTS); + usbint = uhci_readw(uhci, USBINTR); + usbfrnum = uhci_readw(uhci, USBFRNUM); + flbaseadd = uhci_readl(uhci, USBFLBASEADD); + sof = uhci_readb(uhci, USBSOF); + portsc1 = uhci_readw(uhci, USBPORTSC1); + portsc2 = uhci_readw(uhci, USBPORTSC2); out += sprintf(out, " usbcmd = %04x %s%s%s%s%s%s%s%s\n", usbcmd, diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 9189bc984c9..93e17b12fb3 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -75,8 +75,6 @@ static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf) return !!*buf; } -#define OK(x) len = (x); break - #define CLR_RH_PORTSTAT(x) \ status = uhci_readw(uhci, port_addr); \ status &= ~(RWC_BITS|WZ_BITS); \ @@ -244,7 +242,7 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); - int status, lstatus, retval = 0, len = 0; + int status, lstatus, retval = 0; unsigned int port = wIndex - 1; unsigned long port_addr = USBPORTSC1 + 2 * port; u16 wPortChange, wPortStatus; @@ -258,7 +256,8 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case GetHubStatus: *(__le32 *)buf = cpu_to_le32(0); - OK(4); /* hub power */ + retval = 4; /* hub power */ + break; case GetPortStatus: if (port >= uhci->rh_numports) goto err; @@ -311,13 +310,14 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, *(__le16 *)buf = cpu_to_le16(wPortStatus); *(__le16 *)(buf + 2) = cpu_to_le16(wPortChange); - OK(4); + retval = 4; + break; case SetHubFeature: /* We don't implement these */ case ClearHubFeature: switch (wValue) { case C_HUB_OVER_CURRENT: case C_HUB_LOCAL_POWER: - OK(0); + break; default: goto err; } @@ -329,7 +329,7 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, switch (wValue) { case USB_PORT_FEAT_SUSPEND: SET_RH_PORTSTAT(USBPORTSC_SUSP); - OK(0); + break; case USB_PORT_FEAT_RESET: SET_RH_PORTSTAT(USBPORTSC_PR); @@ -338,10 +338,10 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* USB v2.0 7.1.7.5 */ uhci->ports_timeout = jiffies + msecs_to_jiffies(50); - OK(0); + break; case USB_PORT_FEAT_POWER: /* UHCI has no power switching */ - OK(0); + break; default: goto err; } @@ -356,10 +356,10 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* Disable terminates Resume signalling */ uhci_finish_suspend(uhci, port, port_addr); - OK(0); + break; case USB_PORT_FEAT_C_ENABLE: CLR_RH_PORTSTAT(USBPORTSC_PEC); - OK(0); + break; case USB_PORT_FEAT_SUSPEND: if (!(uhci_readw(uhci, port_addr) & USBPORTSC_SUSP)) { @@ -382,32 +382,32 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, uhci->ports_timeout = jiffies + msecs_to_jiffies(20); } - OK(0); + break; case USB_PORT_FEAT_C_SUSPEND: clear_bit(port, &uhci->port_c_suspend); - OK(0); + break; case USB_PORT_FEAT_POWER: /* UHCI has no power switching */ goto err; case USB_PORT_FEAT_C_CONNECTION: CLR_RH_PORTSTAT(USBPORTSC_CSC); - OK(0); + break; case USB_PORT_FEAT_C_OVER_CURRENT: CLR_RH_PORTSTAT(USBPORTSC_OCC); - OK(0); + break; case USB_PORT_FEAT_C_RESET: /* this driver won't report these */ - OK(0); + break; default: goto err; } break; case GetHubDescriptor: - len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength); - memcpy(buf, root_hub_hub_des, len); - if (len > 2) + retval = min_t(unsigned int, sizeof(root_hub_hub_des), wLength); + memcpy(buf, root_hub_hub_des, retval); + if (retval > 2) buf[2] = uhci->rh_numports; - OK(len); + break; default: err: retval = -EPIPE; diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c index c300bd2f7d1..4cd79888804 100644 --- a/drivers/usb/host/uhci-pci.c +++ b/drivers/usb/host/uhci-pci.c @@ -162,6 +162,8 @@ static void uhci_shutdown(struct pci_dev *pdev) #ifdef CONFIG_PM +static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated); + static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); @@ -174,12 +176,6 @@ static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) goto done_okay; /* Already suspended or dead */ - if (uhci->rh_state > UHCI_RH_SUSPENDED) { - dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n"); - rc = -EBUSY; - goto done; - }; - /* All PCI host controllers are required to disable IRQ generation * at the source, so we must turn off PIRQ. */ @@ -195,8 +191,15 @@ static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) done_okay: clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); -done: spin_unlock_irq(&uhci->lock); + + synchronize_irq(hcd->irq); + + /* Check for race with a wakeup request */ + if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) { + uhci_pci_resume(hcd, false); + rc = -EBUSY; + } return rc; } @@ -293,9 +296,11 @@ static struct pci_driver uhci_pci_driver = { .remove = usb_hcd_pci_remove, .shutdown = uhci_shutdown, -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM .driver = { .pm = &usb_hcd_pci_pm_ops }, #endif }; + +MODULE_SOFTDEP("pre: ehci_pci"); diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index d033a0ec7f0..3003fefaa96 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -75,10 +75,9 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we have dma capability bindings this can go away. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - if (!pdev->dev.coherent_dma_mask) - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev, pdev->name); @@ -105,8 +104,7 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev) uhci->regs = hcd->regs; - ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED | - IRQF_SHARED); + ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED); if (ret) goto err_uhci; diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 041c6ddb695..da6f56d996c 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1303,7 +1303,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, } /* Fell behind? */ - if (uhci_frame_before_eq(frame, next)) { + if (!uhci_frame_before_eq(next, frame)) { /* USB_ISO_ASAP: Round up to the first available slot */ if (urb->transfer_flags & URB_ISO_ASAP) @@ -1311,13 +1311,17 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, -qh->period; /* - * Not ASAP: Use the next slot in the stream. If - * the entire URB falls before the threshold, fail. + * Not ASAP: Use the next slot in the stream, + * no matter what. */ else if (!uhci_frame_before_eq(next, frame + (urb->number_of_packets - 1) * qh->period)) - return -EXDEV; + dev_dbg(uhci_dev(uhci), "iso underrun %p (%u+%u < %u)\n", + urb, frame, + (urb->number_of_packets - 1) * + qh->period, + next); } } diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index ecc88db804e..1b0888f8da9 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -134,7 +134,7 @@ static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, default: ret = asl_urb_enqueue(whc, urb, mem_flags); break; - }; + } return ret; } @@ -160,7 +160,7 @@ static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status) default: ret = asl_urb_dequeue(whc, urb, status); break; - }; + } return ret; } diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index fae697ed0b7..805f2348eeb 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -287,7 +287,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) xhci_queue_stop_endpoint(xhci, slot_id, i, suspend); } - cmd->command_trb = xhci->cmd_ring->enqueue; + cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list); xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend); xhci_ring_cmd_db(xhci); @@ -296,7 +296,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) /* Wait for last stop endpoint command to finish */ timeleft = wait_for_completion_interruptible_timeout( cmd->completion, - USB_CTRL_SET_TIMEOUT); + XHCI_CMD_DEFAULT_TIMEOUT); if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for stop endpoint command\n", timeleft == 0 ? "Timeout" : "Signal"); @@ -524,7 +524,8 @@ static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg) * the compliance mode timer is deleted. A port won't enter * compliance mode if it has previously entered U0. */ -void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex) +static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, + u16 wIndex) { u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1); bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); @@ -552,11 +553,15 @@ void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex) * - Mark a port as being done with device resume, * and ring the endpoint doorbells. * - Stop the Synopsys redriver Compliance Mode polling. + * - Drop and reacquire the xHCI lock, in order to wait for port resume. */ static u32 xhci_get_port_status(struct usb_hcd *hcd, struct xhci_bus_state *bus_state, __le32 __iomem **port_array, - u16 wIndex, u32 raw_port_status) + u16 wIndex, u32 raw_port_status, + unsigned long flags) + __releases(&xhci->lock) + __acquires(&xhci->lock) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 status = 0; @@ -591,21 +596,42 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, return 0xffffffff; if (time_after_eq(jiffies, bus_state->resume_done[wIndex])) { + int time_left; + xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); bus_state->resume_done[wIndex] = 0; clear_bit(wIndex, &bus_state->resuming_ports); + + set_bit(wIndex, &bus_state->rexit_ports); xhci_set_link_state(xhci, port_array, wIndex, XDEV_U0); - xhci_dbg(xhci, "set port %d resume\n", - wIndex + 1); - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - wIndex + 1); - if (!slot_id) { - xhci_dbg(xhci, "slot_id is zero\n"); - return 0xffffffff; + + spin_unlock_irqrestore(&xhci->lock, flags); + time_left = wait_for_completion_timeout( + &bus_state->rexit_done[wIndex], + msecs_to_jiffies( + XHCI_MAX_REXIT_TIMEOUT)); + spin_lock_irqsave(&xhci->lock, flags); + + if (time_left) { + slot_id = xhci_find_slot_id_by_port(hcd, + xhci, wIndex + 1); + if (!slot_id) { + xhci_dbg(xhci, "slot_id is zero\n"); + return 0xffffffff; + } + xhci_ring_device(xhci, slot_id); + } else { + int port_status = xhci_readl(xhci, + port_array[wIndex]); + xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", + XHCI_MAX_REXIT_TIMEOUT, + port_status); + status |= USB_PORT_STAT_SUSPEND; + clear_bit(wIndex, &bus_state->rexit_ports); } - xhci_ring_device(xhci, slot_id); + bus_state->port_c_suspend |= 1 << wIndex; bus_state->suspended_ports &= ~(1 << wIndex); } else { @@ -728,7 +754,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; } status = xhci_get_port_status(hcd, bus_state, port_array, - wIndex, temp); + wIndex, temp, flags); if (status == 0xffffffff) goto error; @@ -1132,18 +1158,6 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) xhci_writel(xhci, t2, port_array[port_index]); - - if (hcd->speed != HCD_USB3) { - /* enable remote wake up for USB 2.0 */ - __le32 __iomem *addr; - u32 tmp; - - /* Get the port power control register address. */ - addr = port_array[port_index] + PORTPMSC; - tmp = xhci_readl(xhci, addr); - tmp |= PORT_RWE; - xhci_writel(xhci, tmp, addr); - } } hcd->state = HC_STATE_SUSPENDED; bus_state->next_statechange = jiffies + msecs_to_jiffies(10); @@ -1222,20 +1236,6 @@ int xhci_bus_resume(struct usb_hcd *hcd) xhci_ring_device(xhci, slot_id); } else xhci_writel(xhci, temp, port_array[port_index]); - - if (hcd->speed != HCD_USB3) { - /* disable remote wake up for USB 2.0 */ - __le32 __iomem *addr; - u32 tmp; - - /* Add one to the port status register address to get - * the port power control register address. - */ - addr = port_array[port_index] + PORTPMSC; - tmp = xhci_readl(xhci, addr); - tmp &= ~PORT_RWE; - xhci_writel(xhci, tmp, addr); - } } (void) xhci_readl(xhci, &xhci->op_regs->command); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 53b972c2a09..49b8bd063fa 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1693,9 +1693,7 @@ void xhci_free_command(struct xhci_hcd *xhci, void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); - struct dev_info *dev_info, *next; struct xhci_cd *cur_cd, *next_cd; - unsigned long flags; int size; int i, j, num_ports; @@ -1756,13 +1754,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) scratchpad_free(xhci); - spin_lock_irqsave(&xhci->lock, flags); - list_for_each_entry_safe(dev_info, next, &xhci->lpm_failed_devs, list) { - list_del(&dev_info->list); - kfree(dev_info); - } - spin_unlock_irqrestore(&xhci->lock, flags); - if (!xhci->rh_bw) goto no_bw; @@ -2231,7 +2222,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) u32 page_size, temp; int i; - INIT_LIST_HEAD(&xhci->lpm_failed_devs); INIT_LIST_HEAD(&xhci->cancel_cmd_list); page_size = xhci_readl(xhci, &xhci->op_regs->page_size); @@ -2428,6 +2418,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) for (i = 0; i < USB_MAXCHILDREN; ++i) { xhci->bus_state[0].resume_done[i] = 0; xhci->bus_state[1].resume_done[i] = 0; + /* Only the USB 2.0 completions will ever be used. */ + init_completion(&xhci->bus_state[1].rexit_done[i]); } if (scratchpad_alloc(xhci, flags)) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c2d495057eb..b8dffd59eb2 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -35,6 +35,9 @@ #define PCI_VENDOR_ID_ETRON 0x1b6f #define PCI_DEVICE_ID_ASROCK_P67 0x7023 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 + static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -69,6 +72,14 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) "QUIRK: Fresco Logic xHC needs configure" " endpoint cmd after reset endpoint"); } + if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && + pdev->revision == 0x4) { + xhci->quirks |= XHCI_SLOW_SUSPEND; + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "QUIRK: Fresco Logic xHC revision %u" + "must be suspended extra slowly", + pdev->revision); + } /* Fresco Logic confirms: all revisions of this chip do not * support MSI, even though some of them claim to in their PCI * capabilities. @@ -110,6 +121,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_REBOOT; xhci->quirks |= XHCI_AVOID_BEI; } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) { + /* Workaround for occasional spurious wakeups from S5 (or + * any other sleep) on Haswell machines with LPT and LPT-LP + * with the new Intel BIOS + */ + xhci->quirks |= XHCI_SPURIOUS_WAKEUP; + } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { xhci->quirks |= XHCI_RESET_ON_RESUME; @@ -217,6 +237,11 @@ static void xhci_pci_remove(struct pci_dev *dev) usb_put_hcd(xhci->shared_hcd); } usb_hcd_pci_remove(dev); + + /* Workaround for spurious wakeups at shutdown with HSW */ + if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) + pci_set_power_state(dev, PCI_D3hot); + kfree(xhci); } @@ -351,7 +376,7 @@ static struct pci_driver xhci_pci_driver = { /* suspend and resume implemented later */ .shutdown = usb_hcd_pci_shutdown, -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM .driver = { .pm = &usb_hcd_pci_pm_ops }, diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 411da1fc7ae..1e2f3f49584 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -123,6 +123,16 @@ static int enqueue_is_link_trb(struct xhci_ring *ring) return TRB_TYPE_LINK_LE32(link->control); } +union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring) +{ + /* Enqueue pointer can be left pointing to the link TRB, + * we must handle that + */ + if (TRB_TYPE_LINK_LE32(ring->enqueue->link.control)) + return ring->enq_seg->next->trbs; + return ring->enqueue; +} + /* Updates trb to point to the next TRB in the ring, and updates seg if the next * TRB is in a new segment. This does not skip over link TRBs, and it does not * effect the ring dequeue or enqueue pointers. @@ -168,7 +178,7 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring) if (ring->type == TYPE_EVENT && last_trb_on_last_seg(xhci, ring, ring->deq_seg, ring->dequeue)) { - ring->cycle_state = (ring->cycle_state ? 0 : 1); + ring->cycle_state ^= 1; } ring->deq_seg = ring->deq_seg->next; ring->dequeue = ring->deq_seg->trbs; @@ -716,7 +726,7 @@ static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci, /* Must be called with xhci->lock held in interrupt context */ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, - struct xhci_td *cur_td, int status, char *adjective) + struct xhci_td *cur_td, int status) { struct usb_hcd *hcd; struct urb *urb; @@ -755,10 +765,9 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, * 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain * bit cleared) so that the HW will skip over them. */ -static void handle_stopped_endpoint(struct xhci_hcd *xhci, +static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, union xhci_trb *trb, struct xhci_event_cmd *event) { - unsigned int slot_id; unsigned int ep_index; struct xhci_virt_device *virt_dev; struct xhci_ring *ep_ring; @@ -769,10 +778,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, struct xhci_dequeue_state deq_state; - if (unlikely(TRB_TO_SUSPEND_PORT( - le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])))) { - slot_id = TRB_TO_SLOT_ID( - le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])); + if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) { virt_dev = xhci->devs[slot_id]; if (virt_dev) handle_cmd_in_cmd_wait_list(xhci, virt_dev, @@ -785,7 +791,6 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, } memset(&deq_state, 0, sizeof(deq_state)); - slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3])); ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3])); ep = &xhci->devs[slot_id]->eps[ep_index]; @@ -859,8 +864,12 @@ remove_finished_td: /* Otherwise ring the doorbell(s) to restart queued transfers */ ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } - ep->stopped_td = NULL; - ep->stopped_trb = NULL; + + /* Clear stopped_td and stopped_trb if endpoint is not halted */ + if (!(ep->ep_state & EP_HALTED)) { + ep->stopped_td = NULL; + ep->stopped_trb = NULL; + } /* * Drop the lock and complete the URBs in the cancelled TD list. @@ -877,7 +886,7 @@ remove_finished_td: /* Doesn't matter what we pass for status, since the core will * just overwrite it (because the URB has been unlinked). */ - xhci_giveback_urb_in_irq(xhci, cur_td, 0, "cancelled"); + xhci_giveback_urb_in_irq(xhci, cur_td, 0); /* Stop processing the cancelled list if the watchdog timer is * running. @@ -987,7 +996,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) if (!list_empty(&cur_td->cancelled_td_list)) list_del_init(&cur_td->cancelled_td_list); xhci_giveback_urb_in_irq(xhci, cur_td, - -ESHUTDOWN, "killed"); + -ESHUTDOWN); } while (!list_empty(&temp_ep->cancelled_td_list)) { cur_td = list_first_entry( @@ -996,7 +1005,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) cancelled_td_list); list_del_init(&cur_td->cancelled_td_list); xhci_giveback_urb_in_irq(xhci, cur_td, - -ESHUTDOWN, "killed"); + -ESHUTDOWN); } } } @@ -1063,11 +1072,9 @@ static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci, * endpoint doorbell to restart the ring, but only if there aren't more * cancellations pending. */ -static void handle_set_deq_completion(struct xhci_hcd *xhci, - struct xhci_event_cmd *event, - union xhci_trb *trb) +static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, + union xhci_trb *trb, u32 cmd_comp_code) { - unsigned int slot_id; unsigned int ep_index; unsigned int stream_id; struct xhci_ring *ep_ring; @@ -1075,7 +1082,6 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, struct xhci_ep_ctx *ep_ctx; struct xhci_slot_ctx *slot_ctx; - slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3])); ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3])); stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2])); dev = xhci->devs[slot_id]; @@ -1093,11 +1099,11 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx); - if (GET_COMP_CODE(le32_to_cpu(event->status)) != COMP_SUCCESS) { + if (cmd_comp_code != COMP_SUCCESS) { unsigned int ep_state; unsigned int slot_state; - switch (GET_COMP_CODE(le32_to_cpu(event->status))) { + switch (cmd_comp_code) { case COMP_TRB_ERR: xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because " "of stream ID configuration\n"); @@ -1120,7 +1126,7 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, default: xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown " "completion code of %u.\n", - GET_COMP_CODE(le32_to_cpu(event->status))); + cmd_comp_code); break; } /* OK what do we do now? The endpoint state is hosed, and we @@ -1157,21 +1163,17 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } -static void handle_reset_ep_completion(struct xhci_hcd *xhci, - struct xhci_event_cmd *event, - union xhci_trb *trb) +static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, + union xhci_trb *trb, u32 cmd_comp_code) { - int slot_id; unsigned int ep_index; - slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3])); ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3])); /* This command will only fail if the endpoint wasn't halted, * but we don't care. */ xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Ignoring reset ep completion code of %u", - GET_COMP_CODE(le32_to_cpu(event->status))); + "Ignoring reset ep completion code of %u", cmd_comp_code); /* HW with the reset endpoint quirk needs to have a configure endpoint * command complete before the endpoint can be used. Queue that here @@ -1372,21 +1374,149 @@ static int handle_stopped_cmd_ring(struct xhci_hcd *xhci, return cur_trb_is_good; } +static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id, + u32 cmd_comp_code) +{ + if (cmd_comp_code == COMP_SUCCESS) + xhci->slot_id = slot_id; + else + xhci->slot_id = 0; + complete(&xhci->addr_dev); +} + +static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id) +{ + struct xhci_virt_device *virt_dev; + + virt_dev = xhci->devs[slot_id]; + if (!virt_dev) + return; + if (xhci->quirks & XHCI_EP_LIMIT_QUIRK) + /* Delete default control endpoint resources */ + xhci_free_device_endpoint_resources(xhci, virt_dev, true); + xhci_free_virt_device(xhci, slot_id); +} + +static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, + struct xhci_event_cmd *event, u32 cmd_comp_code) +{ + struct xhci_virt_device *virt_dev; + struct xhci_input_control_ctx *ctrl_ctx; + unsigned int ep_index; + unsigned int ep_state; + u32 add_flags, drop_flags; + + virt_dev = xhci->devs[slot_id]; + if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) + return; + /* + * Configure endpoint commands can come from the USB core + * configuration or alt setting changes, or because the HW + * needed an extra configure endpoint command after a reset + * endpoint command or streams were being configured. + * If the command was for a halted endpoint, the xHCI driver + * is not waiting on the configure endpoint command. + */ + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + if (!ctrl_ctx) { + xhci_warn(xhci, "Could not get input context, bad type.\n"); + return; + } + + add_flags = le32_to_cpu(ctrl_ctx->add_flags); + drop_flags = le32_to_cpu(ctrl_ctx->drop_flags); + /* Input ctx add_flags are the endpoint index plus one */ + ep_index = xhci_last_valid_endpoint(add_flags) - 1; + + /* A usb_set_interface() call directly after clearing a halted + * condition may race on this quirky hardware. Not worth + * worrying about, since this is prototype hardware. Not sure + * if this will work for streams, but streams support was + * untested on this prototype. + */ + if (xhci->quirks & XHCI_RESET_EP_QUIRK && + ep_index != (unsigned int) -1 && + add_flags - SLOT_FLAG == drop_flags) { + ep_state = virt_dev->eps[ep_index].ep_state; + if (!(ep_state & EP_HALTED)) + goto bandwidth_change; + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "Completed config ep cmd - " + "last ep index = %d, state = %d", + ep_index, ep_state); + /* Clear internal halted state and restart ring(s) */ + virt_dev->eps[ep_index].ep_state &= ~EP_HALTED; + ring_doorbell_for_active_rings(xhci, slot_id, ep_index); + return; + } +bandwidth_change: + xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, + "Completed config ep cmd"); + virt_dev->cmd_status = cmd_comp_code; + complete(&virt_dev->cmd_completion); + return; +} + +static void xhci_handle_cmd_eval_ctx(struct xhci_hcd *xhci, int slot_id, + struct xhci_event_cmd *event, u32 cmd_comp_code) +{ + struct xhci_virt_device *virt_dev; + + virt_dev = xhci->devs[slot_id]; + if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) + return; + virt_dev->cmd_status = cmd_comp_code; + complete(&virt_dev->cmd_completion); +} + +static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id, + u32 cmd_comp_code) +{ + xhci->devs[slot_id]->cmd_status = cmd_comp_code; + complete(&xhci->addr_dev); +} + +static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id, + struct xhci_event_cmd *event) +{ + struct xhci_virt_device *virt_dev; + + xhci_dbg(xhci, "Completed reset device command.\n"); + virt_dev = xhci->devs[slot_id]; + if (virt_dev) + handle_cmd_in_cmd_wait_list(xhci, virt_dev, event); + else + xhci_warn(xhci, "Reset device command completion " + "for disabled slot %u\n", slot_id); +} + +static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci, + struct xhci_event_cmd *event) +{ + if (!(xhci->quirks & XHCI_NEC_HOST)) { + xhci->error_bitmask |= 1 << 6; + return; + } + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "NEC firmware version %2x.%02x", + NEC_FW_MAJOR(le32_to_cpu(event->status)), + NEC_FW_MINOR(le32_to_cpu(event->status))); +} + static void handle_cmd_completion(struct xhci_hcd *xhci, struct xhci_event_cmd *event) { int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags)); u64 cmd_dma; dma_addr_t cmd_dequeue_dma; - struct xhci_input_control_ctx *ctrl_ctx; - struct xhci_virt_device *virt_dev; - unsigned int ep_index; - struct xhci_ring *ep_ring; - unsigned int ep_state; + u32 cmd_comp_code; + union xhci_trb *cmd_trb; + u32 cmd_type; cmd_dma = le64_to_cpu(event->cmd_trb); + cmd_trb = xhci->cmd_ring->dequeue; cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, - xhci->cmd_ring->dequeue); + cmd_trb); /* Is the command ring deq ptr out of sync with the deq seg ptr? */ if (cmd_dequeue_dma == 0) { xhci->error_bitmask |= 1 << 4; @@ -1398,135 +1528,69 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, return; } - trace_xhci_cmd_completion(&xhci->cmd_ring->dequeue->generic, - (struct xhci_generic_trb *) event); + trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event); - if ((GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_ABORT) || - (GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_STOP)) { + cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status)); + if (cmd_comp_code == COMP_CMD_ABORT || cmd_comp_code == COMP_CMD_STOP) { /* If the return value is 0, we think the trb pointed by * command ring dequeue pointer is a good trb. The good * trb means we don't want to cancel the trb, but it have * been stopped by host. So we should handle it normally. * Otherwise, driver should invoke inc_deq() and return. */ - if (handle_stopped_cmd_ring(xhci, - GET_COMP_CODE(le32_to_cpu(event->status)))) { + if (handle_stopped_cmd_ring(xhci, cmd_comp_code)) { inc_deq(xhci, xhci->cmd_ring); return; } + /* There is no command to handle if we get a stop event when the + * command ring is empty, event->cmd_trb points to the next + * unset command + */ + if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue) + return; } - switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]) - & TRB_TYPE_BITMASK) { - case TRB_TYPE(TRB_ENABLE_SLOT): - if (GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_SUCCESS) - xhci->slot_id = slot_id; - else - xhci->slot_id = 0; - complete(&xhci->addr_dev); + cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3])); + switch (cmd_type) { + case TRB_ENABLE_SLOT: + xhci_handle_cmd_enable_slot(xhci, slot_id, cmd_comp_code); break; - case TRB_TYPE(TRB_DISABLE_SLOT): - if (xhci->devs[slot_id]) { - if (xhci->quirks & XHCI_EP_LIMIT_QUIRK) - /* Delete default control endpoint resources */ - xhci_free_device_endpoint_resources(xhci, - xhci->devs[slot_id], true); - xhci_free_virt_device(xhci, slot_id); - } + case TRB_DISABLE_SLOT: + xhci_handle_cmd_disable_slot(xhci, slot_id); break; - case TRB_TYPE(TRB_CONFIG_EP): - virt_dev = xhci->devs[slot_id]; - if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) - break; - /* - * Configure endpoint commands can come from the USB core - * configuration or alt setting changes, or because the HW - * needed an extra configure endpoint command after a reset - * endpoint command or streams were being configured. - * If the command was for a halted endpoint, the xHCI driver - * is not waiting on the configure endpoint command. - */ - ctrl_ctx = xhci_get_input_control_ctx(xhci, - virt_dev->in_ctx); - if (!ctrl_ctx) { - xhci_warn(xhci, "Could not get input context, bad type.\n"); - break; - } - /* Input ctx add_flags are the endpoint index plus one */ - ep_index = xhci_last_valid_endpoint(le32_to_cpu(ctrl_ctx->add_flags)) - 1; - /* A usb_set_interface() call directly after clearing a halted - * condition may race on this quirky hardware. Not worth - * worrying about, since this is prototype hardware. Not sure - * if this will work for streams, but streams support was - * untested on this prototype. - */ - if (xhci->quirks & XHCI_RESET_EP_QUIRK && - ep_index != (unsigned int) -1 && - le32_to_cpu(ctrl_ctx->add_flags) - SLOT_FLAG == - le32_to_cpu(ctrl_ctx->drop_flags)) { - ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; - ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state; - if (!(ep_state & EP_HALTED)) - goto bandwidth_change; - xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, - "Completed config ep cmd - " - "last ep index = %d, state = %d", - ep_index, ep_state); - /* Clear internal halted state and restart ring(s) */ - xhci->devs[slot_id]->eps[ep_index].ep_state &= - ~EP_HALTED; - ring_doorbell_for_active_rings(xhci, slot_id, ep_index); - break; - } -bandwidth_change: - xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, - "Completed config ep cmd"); - xhci->devs[slot_id]->cmd_status = - GET_COMP_CODE(le32_to_cpu(event->status)); - complete(&xhci->devs[slot_id]->cmd_completion); + case TRB_CONFIG_EP: + xhci_handle_cmd_config_ep(xhci, slot_id, event, cmd_comp_code); break; - case TRB_TYPE(TRB_EVAL_CONTEXT): - virt_dev = xhci->devs[slot_id]; - if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) - break; - xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(le32_to_cpu(event->status)); - complete(&xhci->devs[slot_id]->cmd_completion); + case TRB_EVAL_CONTEXT: + xhci_handle_cmd_eval_ctx(xhci, slot_id, event, cmd_comp_code); break; - case TRB_TYPE(TRB_ADDR_DEV): - xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(le32_to_cpu(event->status)); - complete(&xhci->addr_dev); + case TRB_ADDR_DEV: + xhci_handle_cmd_addr_dev(xhci, slot_id, cmd_comp_code); break; - case TRB_TYPE(TRB_STOP_RING): - handle_stopped_endpoint(xhci, xhci->cmd_ring->dequeue, event); + case TRB_STOP_RING: + WARN_ON(slot_id != TRB_TO_SLOT_ID( + le32_to_cpu(cmd_trb->generic.field[3]))); + xhci_handle_cmd_stop_ep(xhci, slot_id, cmd_trb, event); break; - case TRB_TYPE(TRB_SET_DEQ): - handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue); + case TRB_SET_DEQ: + WARN_ON(slot_id != TRB_TO_SLOT_ID( + le32_to_cpu(cmd_trb->generic.field[3]))); + xhci_handle_cmd_set_deq(xhci, slot_id, cmd_trb, cmd_comp_code); break; - case TRB_TYPE(TRB_CMD_NOOP): + case TRB_CMD_NOOP: break; - case TRB_TYPE(TRB_RESET_EP): - handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue); + case TRB_RESET_EP: + WARN_ON(slot_id != TRB_TO_SLOT_ID( + le32_to_cpu(cmd_trb->generic.field[3]))); + xhci_handle_cmd_reset_ep(xhci, slot_id, cmd_trb, cmd_comp_code); break; - case TRB_TYPE(TRB_RESET_DEV): - xhci_dbg(xhci, "Completed reset device command.\n"); - slot_id = TRB_TO_SLOT_ID( - le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])); - virt_dev = xhci->devs[slot_id]; - if (virt_dev) - handle_cmd_in_cmd_wait_list(xhci, virt_dev, event); - else - xhci_warn(xhci, "Reset device command completion " - "for disabled slot %u\n", slot_id); + case TRB_RESET_DEV: + WARN_ON(slot_id != TRB_TO_SLOT_ID( + le32_to_cpu(cmd_trb->generic.field[3]))); + xhci_handle_cmd_reset_dev(xhci, slot_id, event); break; - case TRB_TYPE(TRB_NEC_GET_FW): - if (!(xhci->quirks & XHCI_NEC_HOST)) { - xhci->error_bitmask |= 1 << 6; - break; - } - xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, - "NEC firmware version %2x.%02x", - NEC_FW_MAJOR(le32_to_cpu(event->status)), - NEC_FW_MINOR(le32_to_cpu(event->status))); + case TRB_NEC_GET_FW: + xhci_handle_cmd_nec_get_fw(xhci, event); break; default: /* Skip over unknown commands on the event ring */ @@ -1743,6 +1807,19 @@ static void handle_port_status(struct xhci_hcd *xhci, } } + /* + * Check to see if xhci-hub.c is waiting on RExit to U0 transition (or + * RExit to a disconnect state). If so, let the the driver know it's + * out of the RExit state. + */ + if (!DEV_SUPERSPEED(temp) && + test_and_clear_bit(faked_port_index, + &bus_state->rexit_ports)) { + complete(&bus_state->rexit_done[faked_port_index]); + bogus_port_status = true; + goto cleanup; + } + if (hcd->speed != HCD_USB3) xhci_test_and_clear_bit(xhci, port_array, faked_port_index, PORT_PLC); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 49b6edb84a7..4265b48856f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -730,6 +730,9 @@ void xhci_shutdown(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); + /* Workaround for spurious wakeups at shutdown with HSW */ + if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) + xhci_reset(xhci); spin_unlock_irq(&xhci->lock); xhci_cleanup_msix(xhci); @@ -737,6 +740,10 @@ void xhci_shutdown(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_shutdown completed - status = %x", xhci_readl(xhci, &xhci->op_regs->status)); + + /* Yet another workaround for spurious wakeups at shutdown with HSW */ + if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) + pci_set_power_state(to_pci_dev(hcd->self.controller), PCI_D3hot); } #ifdef CONFIG_PM @@ -839,6 +846,7 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) int xhci_suspend(struct xhci_hcd *xhci) { int rc = 0; + unsigned int delay = XHCI_MAX_HALT_USEC; struct usb_hcd *hcd = xhci_to_hcd(xhci); u32 command; @@ -861,8 +869,12 @@ int xhci_suspend(struct xhci_hcd *xhci) command = xhci_readl(xhci, &xhci->op_regs->command); command &= ~CMD_RUN; xhci_writel(xhci, command, &xhci->op_regs->command); + + /* Some chips from Fresco Logic need an extraordinary delay */ + delay *= (xhci->quirks & XHCI_SLOW_SUSPEND) ? 10 : 1; + if (xhci_handshake(xhci, &xhci->op_regs->status, - STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) { + STS_HALT, STS_HALT, delay)) { xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; @@ -2598,15 +2610,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, if (command) { cmd_completion = command->completion; cmd_status = &command->status; - command->command_trb = xhci->cmd_ring->enqueue; - - /* Enqueue pointer can be left pointing to the link TRB, - * we must handle that - */ - if (TRB_TYPE_LINK_LE32(command->command_trb->link.control)) - command->command_trb = - xhci->cmd_ring->enq_seg->next->trbs; - + command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); list_add_tail(&command->cmd_list, &virt_dev->cmd_list); } else { cmd_completion = &virt_dev->cmd_completion; @@ -2614,7 +2618,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, } init_completion(cmd_completion); - cmd_trb = xhci->cmd_ring->dequeue; + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); if (!ctx_change) ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma, udev->slot_id, must_succeed); @@ -3439,14 +3443,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) /* Attempt to submit the Reset Device command to the command ring */ spin_lock_irqsave(&xhci->lock, flags); - reset_device_cmd->command_trb = xhci->cmd_ring->enqueue; - - /* Enqueue pointer can be left pointing to the link TRB, - * we must handle that - */ - if (TRB_TYPE_LINK_LE32(reset_device_cmd->command_trb->link.control)) - reset_device_cmd->command_trb = - xhci->cmd_ring->enq_seg->next->trbs; + reset_device_cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); ret = xhci_queue_reset_device(xhci, slot_id); @@ -3462,7 +3459,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) /* Wait for the Reset Device command to finish */ timeleft = wait_for_completion_interruptible_timeout( reset_device_cmd->completion, - USB_CTRL_SET_TIMEOUT); + XHCI_CMD_DEFAULT_TIMEOUT); if (timeleft <= 0) { xhci_warn(xhci, "%s while waiting for reset device command\n", timeleft == 0 ? "Timeout" : "Signal"); @@ -3586,11 +3583,6 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); } - if (udev->usb2_hw_lpm_enabled) { - xhci_set_usb2_hardware_lpm(hcd, udev, 0); - udev->usb2_hw_lpm_enabled = 0; - } - spin_lock_irqsave(&xhci->lock, flags); /* Don't disable the slot if the host controller is dead. */ state = xhci_readl(xhci, &xhci->op_regs->status); @@ -3650,7 +3642,7 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) union xhci_trb *cmd_trb; spin_lock_irqsave(&xhci->lock, flags); - cmd_trb = xhci->cmd_ring->dequeue; + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0); if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); @@ -3724,9 +3716,6 @@ disable_slot: * the device). * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so * we should only issue and wait on one address command at the same time. - * - * We add one to the device address issued by the hardware because the USB core - * uses address 1 for the root hubs (even though they're not really devices). */ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) { @@ -3785,7 +3774,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) slot_ctx->dev_info >> 27); spin_lock_irqsave(&xhci->lock, flags); - cmd_trb = xhci->cmd_ring->dequeue; + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma, udev->slot_id); if (ret) { @@ -3871,16 +3860,13 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); trace_xhci_address_ctx(xhci, virt_dev->out_ctx, slot_ctx->dev_info >> 27); - /* Use kernel assigned address for devices; store xHC assigned - * address locally. */ - virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK) - + 1; /* Zero the input context control for later use */ ctrl_ctx->add_flags = 0; ctrl_ctx->drop_flags = 0; xhci_dbg_trace(xhci, trace_xhci_dbg_address, - "Internal device address = %d", virt_dev->address); + "Internal device address = %d", + le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK); return 0; } @@ -4028,133 +4014,6 @@ static int xhci_calculate_usb2_hw_lpm_params(struct usb_device *udev) return PORT_BESLD(besld) | PORT_L1_TIMEOUT(l1) | PORT_HIRDM(hirdm); } -static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd, - struct usb_device *udev) -{ - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct dev_info *dev_info; - __le32 __iomem **port_array; - __le32 __iomem *addr, *pm_addr; - u32 temp, dev_id; - unsigned int port_num; - unsigned long flags; - int hird; - int ret; - - if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support || - !udev->lpm_capable) - return -EINVAL; - - /* we only support lpm for non-hub device connected to root hub yet */ - if (!udev->parent || udev->parent->parent || - udev->descriptor.bDeviceClass == USB_CLASS_HUB) - return -EINVAL; - - spin_lock_irqsave(&xhci->lock, flags); - - /* Look for devices in lpm_failed_devs list */ - dev_id = le16_to_cpu(udev->descriptor.idVendor) << 16 | - le16_to_cpu(udev->descriptor.idProduct); - list_for_each_entry(dev_info, &xhci->lpm_failed_devs, list) { - if (dev_info->dev_id == dev_id) { - ret = -EINVAL; - goto finish; - } - } - - port_array = xhci->usb2_ports; - port_num = udev->portnum - 1; - - if (port_num > HCS_MAX_PORTS(xhci->hcs_params1)) { - xhci_dbg(xhci, "invalid port number %d\n", udev->portnum); - ret = -EINVAL; - goto finish; - } - - /* - * Test USB 2.0 software LPM. - * FIXME: some xHCI 1.0 hosts may implement a new register to set up - * hardware-controlled USB 2.0 LPM. See section 5.4.11 and 4.23.5.1.1.1 - * in the June 2011 errata release. - */ - xhci_dbg(xhci, "test port %d software LPM\n", port_num); - /* - * Set L1 Device Slot and HIRD/BESL. - * Check device's USB 2.0 extension descriptor to determine whether - * HIRD or BESL shoule be used. See USB2.0 LPM errata. - */ - pm_addr = port_array[port_num] + PORTPMSC; - hird = xhci_calculate_hird_besl(xhci, udev); - temp = PORT_L1DS(udev->slot_id) | PORT_HIRD(hird); - xhci_writel(xhci, temp, pm_addr); - - /* Set port link state to U2(L1) */ - addr = port_array[port_num]; - xhci_set_link_state(xhci, port_array, port_num, XDEV_U2); - - /* wait for ACK */ - spin_unlock_irqrestore(&xhci->lock, flags); - msleep(10); - spin_lock_irqsave(&xhci->lock, flags); - - /* Check L1 Status */ - ret = xhci_handshake(xhci, pm_addr, - PORT_L1S_MASK, PORT_L1S_SUCCESS, 125); - if (ret != -ETIMEDOUT) { - /* enter L1 successfully */ - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, "port %d entered L1 state, port status 0x%x\n", - port_num, temp); - ret = 0; - } else { - temp = xhci_readl(xhci, pm_addr); - xhci_dbg(xhci, "port %d software lpm failed, L1 status %d\n", - port_num, temp & PORT_L1S_MASK); - ret = -EINVAL; - } - - /* Resume the port */ - xhci_set_link_state(xhci, port_array, port_num, XDEV_U0); - - spin_unlock_irqrestore(&xhci->lock, flags); - msleep(10); - spin_lock_irqsave(&xhci->lock, flags); - - /* Clear PLC */ - xhci_test_and_clear_bit(xhci, port_array, port_num, PORT_PLC); - - /* Check PORTSC to make sure the device is in the right state */ - if (!ret) { - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, "resumed port %d status 0x%x\n", port_num, temp); - if (!(temp & PORT_CONNECT) || !(temp & PORT_PE) || - (temp & PORT_PLS_MASK) != XDEV_U0) { - xhci_dbg(xhci, "port L1 resume fail\n"); - ret = -EINVAL; - } - } - - if (ret) { - /* Insert dev to lpm_failed_devs list */ - xhci_warn(xhci, "device LPM test failed, may disconnect and " - "re-enumerate\n"); - dev_info = kzalloc(sizeof(struct dev_info), GFP_ATOMIC); - if (!dev_info) { - ret = -ENOMEM; - goto finish; - } - dev_info->dev_id = dev_id; - INIT_LIST_HEAD(&dev_info->list); - list_add(&dev_info->list, &xhci->lpm_failed_devs); - } else { - xhci_ring_device(xhci, udev->slot_id); - } - -finish: - spin_unlock_irqrestore(&xhci->lock, flags); - return ret; -} - int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, struct usb_device *udev, int enable) { @@ -4231,7 +4090,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, } pm_val &= ~PORT_HIRD_MASK; - pm_val |= PORT_HIRD(hird) | PORT_RWE; + pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id); xhci_writel(xhci, pm_val, pm_addr); pm_val = xhci_readl(xhci, pm_addr); pm_val |= PORT_HLE; @@ -4239,7 +4098,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, /* flush write */ xhci_readl(xhci, pm_addr); } else { - pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK); + pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK | PORT_L1DS_MASK); xhci_writel(xhci, pm_val, pm_addr); /* flush write */ xhci_readl(xhci, pm_addr); @@ -4282,24 +4141,26 @@ static int xhci_check_usb2_port_capability(struct xhci_hcd *xhci, int port, int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int ret; int portnum = udev->portnum - 1; - ret = xhci_usb2_software_lpm_test(hcd, udev); - if (!ret) { - xhci_dbg(xhci, "software LPM test succeed\n"); - if (xhci->hw_lpm_support == 1 && - xhci_check_usb2_port_capability(xhci, portnum, XHCI_HLC)) { - udev->usb2_hw_lpm_capable = 1; - udev->l1_params.timeout = XHCI_L1_TIMEOUT; - udev->l1_params.besl = XHCI_DEFAULT_BESL; - if (xhci_check_usb2_port_capability(xhci, portnum, - XHCI_BLC)) - udev->usb2_hw_lpm_besl_capable = 1; - ret = xhci_set_usb2_hardware_lpm(hcd, udev, 1); - if (!ret) - udev->usb2_hw_lpm_enabled = 1; - } + if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support || + !udev->lpm_capable) + return 0; + + /* we only support lpm for non-hub device connected to root hub yet */ + if (!udev->parent || udev->parent->parent || + udev->descriptor.bDeviceClass == USB_CLASS_HUB) + return 0; + + if (xhci->hw_lpm_support == 1 && + xhci_check_usb2_port_capability( + xhci, portnum, XHCI_HLC)) { + udev->usb2_hw_lpm_capable = 1; + udev->l1_params.timeout = XHCI_L1_TIMEOUT; + udev->l1_params.besl = XHCI_DEFAULT_BESL; + if (xhci_check_usb2_port_capability(xhci, portnum, + XHCI_BLC)) + udev->usb2_hw_lpm_besl_capable = 1; } return 0; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 46aa1489414..03c74b7965f 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -383,6 +383,7 @@ struct xhci_op_regs { #define PORT_RWE (1 << 3) #define PORT_HIRD(p) (((p) & 0xf) << 4) #define PORT_HIRD_MASK (0xf << 4) +#define PORT_L1DS_MASK (0xff << 8) #define PORT_L1DS(p) (((p) & 0xff) << 8) #define PORT_HLE (1 << 16) @@ -934,8 +935,6 @@ struct xhci_virt_device { /* Rings saved to ensure old alt settings can be re-instated */ struct xhci_ring **ring_cache; int num_rings_cached; - /* Store xHC assigned device address */ - int address; #define XHCI_MAX_RINGS_CACHED 31 struct xhci_virt_ep eps[31]; struct completion cmd_completion; @@ -1412,8 +1411,18 @@ struct xhci_bus_state { unsigned long resume_done[USB_MAXCHILDREN]; /* which ports have started to resume */ unsigned long resuming_ports; + /* Which ports are waiting on RExit to U0 transition. */ + unsigned long rexit_ports; + struct completion rexit_done[USB_MAXCHILDREN]; }; + +/* + * It can take up to 20 ms to transition from RExit to U0 on the + * Intel Lynx Point LP xHCI host. + */ +#define XHCI_MAX_REXIT_TIMEOUT (20 * 1000) + static inline unsigned int hcd_index(struct usb_hcd *hcd) { if (hcd->speed == HCD_USB3) @@ -1538,6 +1547,8 @@ struct xhci_hcd { #define XHCI_COMP_MODE_QUIRK (1 << 14) #define XHCI_AVOID_BEI (1 << 15) #define XHCI_PLAT (1 << 16) +#define XHCI_SLOW_SUSPEND (1 << 17) +#define XHCI_SPURIOUS_WAKEUP (1 << 18) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ @@ -1840,6 +1851,7 @@ int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, union xhci_trb *cmd_trb); void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); +union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring); /* xHCI roothub code */ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index e2b21c1d9c4..ba5f70f9288 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -246,6 +246,6 @@ config USB_EZUSB_FX2 config USB_HSIC_USB3503 tristate "USB3503 HSIC to USB20 Driver" depends on I2C - select REGMAP + select REGMAP_I2C help This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index aa28ac8c760..b4152820d65 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -120,7 +120,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf) struct usb_host_endpoint *e; e = alt->endpoint + ep; - switch (e->desc.bmAttributes) { + switch (usb_endpoint_type(&e->desc)) { case USB_ENDPOINT_XFER_BULK: break; case USB_ENDPOINT_XFER_ISOC: @@ -437,7 +437,7 @@ alloc_sglist(int nents, int max, int vary) if (max == 0) return NULL; - sg = kmalloc_array(nents, sizeof *sg, GFP_KERNEL); + sg = kmalloc_array(nents, sizeof(*sg), GFP_KERNEL); if (!sg) return NULL; sg_init_table(sg, nents); @@ -573,7 +573,7 @@ static int is_good_config(struct usbtest_dev *tdev, int len) { struct usb_config_descriptor *config; - if (len < sizeof *config) + if (len < sizeof(*config)) return 0; config = (struct usb_config_descriptor *) tdev->buf; @@ -606,6 +606,76 @@ static int is_good_config(struct usbtest_dev *tdev, int len) return 0; } +static int is_good_ext(struct usbtest_dev *tdev, u8 *buf) +{ + struct usb_ext_cap_descriptor *ext; + u32 attr; + + ext = (struct usb_ext_cap_descriptor *) buf; + + if (ext->bLength != USB_DT_USB_EXT_CAP_SIZE) { + ERROR(tdev, "bogus usb 2.0 extension descriptor length\n"); + return 0; + } + + attr = le32_to_cpu(ext->bmAttributes); + /* bits[1:4] is used and others are reserved */ + if (attr & ~0x1e) { /* reserved == 0 */ + ERROR(tdev, "reserved bits set\n"); + return 0; + } + + return 1; +} + +static int is_good_ss_cap(struct usbtest_dev *tdev, u8 *buf) +{ + struct usb_ss_cap_descriptor *ss; + + ss = (struct usb_ss_cap_descriptor *) buf; + + if (ss->bLength != USB_DT_USB_SS_CAP_SIZE) { + ERROR(tdev, "bogus superspeed device capability descriptor length\n"); + return 0; + } + + /* + * only bit[1] of bmAttributes is used for LTM and others are + * reserved + */ + if (ss->bmAttributes & ~0x02) { /* reserved == 0 */ + ERROR(tdev, "reserved bits set in bmAttributes\n"); + return 0; + } + + /* bits[0:3] of wSpeedSupported is used and others are reserved */ + if (le16_to_cpu(ss->wSpeedSupported) & ~0x0f) { /* reserved == 0 */ + ERROR(tdev, "reserved bits set in wSpeedSupported\n"); + return 0; + } + + return 1; +} + +static int is_good_con_id(struct usbtest_dev *tdev, u8 *buf) +{ + struct usb_ss_container_id_descriptor *con_id; + + con_id = (struct usb_ss_container_id_descriptor *) buf; + + if (con_id->bLength != USB_DT_USB_SS_CONTN_ID_SIZE) { + ERROR(tdev, "bogus container id descriptor length\n"); + return 0; + } + + if (con_id->bReserved) { /* reserved == 0 */ + ERROR(tdev, "reserved bits set\n"); + return 0; + } + + return 1; +} + /* sanity test for standard requests working with usb_control_mesg() and some * of the utility functions which use it. * @@ -683,12 +753,96 @@ static int ch9_postconfig(struct usbtest_dev *dev) /* there's always [9.4.3] a device descriptor [9.6.1] */ retval = usb_get_descriptor(udev, USB_DT_DEVICE, 0, - dev->buf, sizeof udev->descriptor); - if (retval != sizeof udev->descriptor) { + dev->buf, sizeof(udev->descriptor)); + if (retval != sizeof(udev->descriptor)) { dev_err(&iface->dev, "dev descriptor --> %d\n", retval); return (retval < 0) ? retval : -EDOM; } + /* + * there's always [9.4.3] a bos device descriptor [9.6.2] in USB + * 3.0 spec + */ + if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0300) { + struct usb_bos_descriptor *bos = NULL; + struct usb_dev_cap_header *header = NULL; + unsigned total, num, length; + u8 *buf; + + retval = usb_get_descriptor(udev, USB_DT_BOS, 0, dev->buf, + sizeof(*udev->bos->desc)); + if (retval != sizeof(*udev->bos->desc)) { + dev_err(&iface->dev, "bos descriptor --> %d\n", retval); + return (retval < 0) ? retval : -EDOM; + } + + bos = (struct usb_bos_descriptor *)dev->buf; + total = le16_to_cpu(bos->wTotalLength); + num = bos->bNumDeviceCaps; + + if (total > TBUF_SIZE) + total = TBUF_SIZE; + + /* + * get generic device-level capability descriptors [9.6.2] + * in USB 3.0 spec + */ + retval = usb_get_descriptor(udev, USB_DT_BOS, 0, dev->buf, + total); + if (retval != total) { + dev_err(&iface->dev, "bos descriptor set --> %d\n", + retval); + return (retval < 0) ? retval : -EDOM; + } + + length = sizeof(*udev->bos->desc); + buf = dev->buf; + for (i = 0; i < num; i++) { + buf += length; + if (buf + sizeof(struct usb_dev_cap_header) > + dev->buf + total) + break; + + header = (struct usb_dev_cap_header *)buf; + length = header->bLength; + + if (header->bDescriptorType != + USB_DT_DEVICE_CAPABILITY) { + dev_warn(&udev->dev, "not device capability descriptor, skip\n"); + continue; + } + + switch (header->bDevCapabilityType) { + case USB_CAP_TYPE_EXT: + if (buf + USB_DT_USB_EXT_CAP_SIZE > + dev->buf + total || + !is_good_ext(dev, buf)) { + dev_err(&iface->dev, "bogus usb 2.0 extension descriptor\n"); + return -EDOM; + } + break; + case USB_SS_CAP_TYPE: + if (buf + USB_DT_USB_SS_CAP_SIZE > + dev->buf + total || + !is_good_ss_cap(dev, buf)) { + dev_err(&iface->dev, "bogus superspeed device capability descriptor\n"); + return -EDOM; + } + break; + case CONTAINER_ID_TYPE: + if (buf + USB_DT_USB_SS_CONTN_ID_SIZE > + dev->buf + total || + !is_good_con_id(dev, buf)) { + dev_err(&iface->dev, "bogus container id descriptor\n"); + return -EDOM; + } + break; + default: + break; + } + } + } + /* there's always [9.4.3] at least one config descriptor [9.6.3] */ for (i = 0; i < udev->descriptor.bNumConfigurations; i++) { retval = usb_get_descriptor(udev, USB_DT_CONFIG, i, @@ -954,7 +1108,7 @@ test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param) * device, but some are chosen to trigger protocol stalls * or short reads. */ - memset(&req, 0, sizeof req); + memset(&req, 0, sizeof(req)); req.bRequest = USB_REQ_GET_DESCRIPTOR; req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE; @@ -1074,7 +1228,7 @@ test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param) if (!u) goto cleanup; - reqp = kmalloc(sizeof *reqp, GFP_KERNEL); + reqp = kmalloc(sizeof(*reqp), GFP_KERNEL); if (!reqp) goto cleanup; reqp->setup = req; @@ -1667,13 +1821,13 @@ test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param, if (param->sglen > 10) return -EDOM; - memset(&context, 0, sizeof context); + memset(&context, 0, sizeof(context)); context.count = param->iterations * param->sglen; context.dev = dev; init_completion(&context.done); spin_lock_init(&context.lock); - memset(urbs, 0, sizeof urbs); + memset(urbs, 0, sizeof(urbs)); udev = testdev_to_usbdev(dev); dev_info(&dev->intf->dev, "... iso period %d %sframes, wMaxPacket %04x\n", diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index c64ee09a7c0..57dfc0cedb0 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -71,11 +71,11 @@ config USB_MUSB_DA8XX config USB_MUSB_TUSB6010 tristate "TUSB6010" - depends on GENERIC_HARDIRQS config USB_MUSB_OMAP2PLUS tristate "OMAP2430 and onwards" depends on ARCH_OMAP2PLUS + select GENERIC_PHY config USB_MUSB_AM35X tristate "AM35x" @@ -91,7 +91,7 @@ config USB_MUSB_BLACKFIN depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523) config USB_MUSB_UX500 - tristate "U8500 and U5500" + tristate "Ux500 platforms" endchoice @@ -113,7 +113,7 @@ choice allow using DMA on multiplatform kernels. config USB_UX500_DMA - bool 'ST Ericsson U8500 and U5500' + bool 'ST Ericsson Ux500' depends on USB_MUSB_UX500 help Enable DMA transfers on UX500 platforms. diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 5c310c66421..ca45b39db5b 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -89,7 +89,6 @@ struct am35x_glue { struct clk *phy_clk; struct clk *clk; }; -#define glue_to_musb(g) platform_get_drvdata(g->musb) /* * am35x_musb_enable - enable interrupts @@ -452,14 +451,18 @@ static const struct musb_platform_ops am35x_ops = { .set_vbus = am35x_musb_set_vbus, }; -static u64 am35x_dmamask = DMA_BIT_MASK(32); +static const struct platform_device_info am35x_dev_info = { + .name = "musb-hdrc", + .id = PLATFORM_DEVID_AUTO, + .dma_mask = DMA_BIT_MASK(32), +}; static int am35x_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); struct platform_device *musb; struct am35x_glue *glue; - + struct platform_device_info pinfo; struct clk *phy_clk; struct clk *clk; @@ -471,12 +474,6 @@ static int am35x_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); - if (!musb) { - dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; - } - phy_clk = clk_get(&pdev->dev, "fck"); if (IS_ERR(phy_clk)) { dev_err(&pdev->dev, "failed to get PHY clock\n"); @@ -503,12 +500,7 @@ static int am35x_probe(struct platform_device *pdev) goto err6; } - musb->dev.parent = &pdev->dev; - musb->dev.dma_mask = &am35x_dmamask; - musb->dev.coherent_dma_mask = am35x_dmamask; - glue->dev = &pdev->dev; - glue->musb = musb; glue->phy_clk = phy_clk; glue->clk = clk; @@ -516,22 +508,17 @@ static int am35x_probe(struct platform_device *pdev) platform_set_drvdata(pdev, glue); - ret = platform_device_add_resources(musb, pdev->resource, - pdev->num_resources); - if (ret) { - dev_err(&pdev->dev, "failed to add resources\n"); - goto err7; - } - - ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); - if (ret) { - dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err7; - } - - ret = platform_device_add(musb); - if (ret) { - dev_err(&pdev->dev, "failed to register musb device\n"); + pinfo = am35x_dev_info; + pinfo.parent = &pdev->dev; + pinfo.res = pdev->resource; + pinfo.num_res = pdev->num_resources; + pinfo.data = pdata; + pinfo.size_data = sizeof(*pdata); + + glue->musb = musb = platform_device_register_full(&pinfo); + if (IS_ERR(musb)) { + ret = PTR_ERR(musb); + dev_err(&pdev->dev, "failed to register musb device: %d\n", ret); goto err7; } @@ -550,9 +537,6 @@ err4: clk_put(phy_clk); err3: - platform_device_put(musb); - -err1: kfree(glue); err0: @@ -615,23 +599,16 @@ static int am35x_resume(struct device *dev) return 0; } - -static struct dev_pm_ops am35x_pm_ops = { - .suspend = am35x_suspend, - .resume = am35x_resume, -}; - -#define DEV_PM_OPS &am35x_pm_ops -#else -#define DEV_PM_OPS NULL #endif +static SIMPLE_DEV_PM_OPS(am35x_pm_ops, am35x_suspend, am35x_resume); + static struct platform_driver am35x_driver = { .probe = am35x_probe, .remove = am35x_remove, .driver = { .name = "musb-am35x", - .pm = DEV_PM_OPS, + .pm = &am35x_pm_ops, }, }; diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 72e2056b608..d9692f78e22 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -561,23 +561,16 @@ static int bfin_resume(struct device *dev) return 0; } - -static struct dev_pm_ops bfin_pm_ops = { - .suspend = bfin_suspend, - .resume = bfin_resume, -}; - -#define DEV_PM_OPS &bfin_pm_ops -#else -#define DEV_PM_OPS NULL #endif +static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume); + static struct platform_driver bfin_driver = { .probe = bfin_probe, .remove = __exit_p(bfin_remove), .driver = { .name = "musb-blackfin", - .pm = DEV_PM_OPS, + .pm = &bfin_pm_ops, }, }; diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index d9ddf4122f3..2f2c1cb3642 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -472,7 +472,11 @@ static const struct musb_platform_ops da8xx_ops = { .set_vbus = da8xx_musb_set_vbus, }; -static u64 da8xx_dmamask = DMA_BIT_MASK(32); +static const struct platform_device_info da8xx_dev_info = { + .name = "musb-hdrc", + .id = PLATFORM_DEVID_AUTO, + .dma_mask = DMA_BIT_MASK(32), +}; static int da8xx_probe(struct platform_device *pdev) { @@ -480,7 +484,7 @@ static int da8xx_probe(struct platform_device *pdev) struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); struct platform_device *musb; struct da8xx_glue *glue; - + struct platform_device_info pinfo; struct clk *clk; int ret = -ENOMEM; @@ -491,12 +495,6 @@ static int da8xx_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); - if (!musb) { - dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; - } - clk = clk_get(&pdev->dev, "usb20"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); @@ -510,12 +508,7 @@ static int da8xx_probe(struct platform_device *pdev) goto err4; } - musb->dev.parent = &pdev->dev; - musb->dev.dma_mask = &da8xx_dmamask; - musb->dev.coherent_dma_mask = da8xx_dmamask; - glue->dev = &pdev->dev; - glue->musb = musb; glue->clk = clk; pdata->platform_ops = &da8xx_ops; @@ -535,22 +528,17 @@ static int da8xx_probe(struct platform_device *pdev) musb_resources[1].end = pdev->resource[1].end; musb_resources[1].flags = pdev->resource[1].flags; - ret = platform_device_add_resources(musb, musb_resources, - ARRAY_SIZE(musb_resources)); - if (ret) { - dev_err(&pdev->dev, "failed to add resources\n"); - goto err5; - } - - ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); - if (ret) { - dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err5; - } - - ret = platform_device_add(musb); - if (ret) { - dev_err(&pdev->dev, "failed to register musb device\n"); + pinfo = da8xx_dev_info; + pinfo.parent = &pdev->dev; + pinfo.res = musb_resources; + pinfo.num_res = ARRAY_SIZE(musb_resources); + pinfo.data = pdata; + pinfo.size_data = sizeof(*pdata); + + glue->musb = musb = platform_device_register_full(&pinfo); + if (IS_ERR(musb)) { + ret = PTR_ERR(musb); + dev_err(&pdev->dev, "failed to register musb device: %d\n", ret); goto err5; } @@ -563,9 +551,6 @@ err4: clk_put(clk); err3: - platform_device_put(musb); - -err1: kfree(glue); err0: diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index ed0834e2b72..1121fd741bf 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -505,14 +505,19 @@ static const struct musb_platform_ops davinci_ops = { .set_vbus = davinci_musb_set_vbus, }; -static u64 davinci_dmamask = DMA_BIT_MASK(32); +static const struct platform_device_info davinci_dev_info = { + .name = "musb-hdrc", + .id = PLATFORM_DEVID_AUTO, + .dma_mask = DMA_BIT_MASK(32), +}; static int davinci_probe(struct platform_device *pdev) { - struct resource musb_resources[2]; + struct resource musb_resources[3]; struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); struct platform_device *musb; struct davinci_glue *glue; + struct platform_device_info pinfo; struct clk *clk; int ret = -ENOMEM; @@ -523,12 +528,6 @@ static int davinci_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); - if (!musb) { - dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; - } - clk = clk_get(&pdev->dev, "usb"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); @@ -542,12 +541,7 @@ static int davinci_probe(struct platform_device *pdev) goto err4; } - musb->dev.parent = &pdev->dev; - musb->dev.dma_mask = &davinci_dmamask; - musb->dev.coherent_dma_mask = davinci_dmamask; - glue->dev = &pdev->dev; - glue->musb = musb; glue->clk = clk; pdata->platform_ops = &davinci_ops; @@ -567,22 +561,26 @@ static int davinci_probe(struct platform_device *pdev) musb_resources[1].end = pdev->resource[1].end; musb_resources[1].flags = pdev->resource[1].flags; - ret = platform_device_add_resources(musb, musb_resources, - ARRAY_SIZE(musb_resources)); - if (ret) { - dev_err(&pdev->dev, "failed to add resources\n"); - goto err5; - } - - ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); - if (ret) { - dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err5; - } - - ret = platform_device_add(musb); - if (ret) { - dev_err(&pdev->dev, "failed to register musb device\n"); + /* + * For DM6467 3 resources are passed. A placeholder for the 3rd + * resource is always there, so it's safe to always copy it... + */ + musb_resources[2].name = pdev->resource[2].name; + musb_resources[2].start = pdev->resource[2].start; + musb_resources[2].end = pdev->resource[2].end; + musb_resources[2].flags = pdev->resource[2].flags; + + pinfo = davinci_dev_info; + pinfo.parent = &pdev->dev; + pinfo.res = musb_resources; + pinfo.num_res = ARRAY_SIZE(musb_resources); + pinfo.data = pdata; + pinfo.size_data = sizeof(*pdata); + + glue->musb = musb = platform_device_register_full(&pinfo); + if (IS_ERR(musb)) { + ret = PTR_ERR(musb); + dev_err(&pdev->dev, "failed to register musb device: %d\n", ret); goto err5; } @@ -595,9 +593,6 @@ err4: clk_put(clk); err3: - platform_device_put(musb); - -err1: kfree(glue); err0: diff --git a/drivers/usb/musb/musb_am335x.c b/drivers/usb/musb/musb_am335x.c index 41ac5b5b57c..8be9b02c3cc 100644 --- a/drivers/usb/musb/musb_am335x.c +++ b/drivers/usb/musb/musb_am335x.c @@ -46,7 +46,7 @@ static struct platform_driver am335x_child_driver = { .remove = am335x_child_remove, .driver = { .name = "am335x-usb-childs", - .of_match_table = of_match_ptr(am335x_child_of_match), + .of_match_table = am335x_child_of_match, }, }; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 18e877ffe7b..0a43329569d 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -617,7 +617,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ default: s = "VALID"; break; - }; s; }), + } s; }), VBUSERR_RETRY_COUNT - musb->vbuserr_retry, musb->port1_status); @@ -922,6 +922,52 @@ static void musb_generic_disable(struct musb *musb) } /* + * Program the HDRC to start (enable interrupts, dma, etc.). + */ +void musb_start(struct musb *musb) +{ + void __iomem *regs = musb->mregs; + u8 devctl = musb_readb(regs, MUSB_DEVCTL); + + dev_dbg(musb->controller, "<== devctl %02x\n", devctl); + + /* Set INT enable registers, enable interrupts */ + musb->intrtxe = musb->epmask; + musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); + musb->intrrxe = musb->epmask & 0xfffe; + musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); + musb_writeb(regs, MUSB_INTRUSBE, 0xf7); + + musb_writeb(regs, MUSB_TESTMODE, 0); + + /* put into basic highspeed mode and start session */ + musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE + | MUSB_POWER_HSENAB + /* ENSUSPEND wedges tusb */ + /* | MUSB_POWER_ENSUSPEND */ + ); + + musb->is_active = 0; + devctl = musb_readb(regs, MUSB_DEVCTL); + devctl &= ~MUSB_DEVCTL_SESSION; + + /* session started after: + * (a) ID-grounded irq, host mode; + * (b) vbus present/connect IRQ, peripheral mode; + * (c) peripheral initiates, using SRP + */ + if (musb->port_mode != MUSB_PORT_MODE_HOST && + (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { + musb->is_active = 1; + } else { + devctl |= MUSB_DEVCTL_SESSION; + } + + musb_platform_enable(musb); + musb_writeb(regs, MUSB_DEVCTL, devctl); +} + +/* * Make the HDRC stop (disable interrupts, etc.); * reversible by musb_start * called on gadget driver unregister @@ -1763,8 +1809,7 @@ static void musb_free(struct musb *musb) disable_irq_wake(musb->nIrq); free_irq(musb->nIrq, musb); } - if (musb->dma_controller) - dma_controller_destroy(musb->dma_controller); + cancel_work_sync(&musb->irq_work); musb_host_free(musb); } @@ -1839,8 +1884,13 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_get_sync(musb->controller); - if (use_dma && dev->dma_mask) + if (use_dma && dev->dma_mask) { musb->dma_controller = dma_controller_create(musb, musb->mregs); + if (IS_ERR(musb->dma_controller)) { + status = PTR_ERR(musb->dma_controller); + goto fail2_5; + } + } /* be sure interrupts are disabled before connecting ISR */ musb_platform_disable(musb); @@ -1900,6 +1950,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (status < 0) goto fail3; status = musb_gadget_setup(musb); + if (status) + musb_host_cleanup(musb); break; default: dev_err(dev, "unsupported port mode %d\n", musb->port_mode); @@ -1926,10 +1978,12 @@ fail5: fail4: musb_gadget_cleanup(musb); + musb_host_cleanup(musb); fail3: if (musb->dma_controller) dma_controller_destroy(musb->dma_controller); +fail2_5: pm_runtime_put_sync(musb->controller); fail2: @@ -1986,6 +2040,9 @@ static int musb_remove(struct platform_device *pdev) musb_exit_debugfs(musb); musb_shutdown(pdev); + if (musb->dma_controller) + dma_controller_destroy(musb->dma_controller); + musb_free(musb); device_init_wakeup(dev, 0); return 0; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 65f3917b4fc..29f7cd7c796 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -46,6 +46,7 @@ #include <linux/usb.h> #include <linux/usb/otg.h> #include <linux/usb/musb.h> +#include <linux/phy/phy.h> struct musb; struct musb_hw_ep; @@ -341,6 +342,7 @@ struct musb { u16 int_tx; struct usb_phy *xceiv; + struct phy *phy; int nIrq; unsigned irq_wake:1; @@ -503,6 +505,7 @@ static inline void musb_configure_ep0(struct musb *musb) extern const char musb_driver_name[]; extern void musb_stop(struct musb *musb); +extern void musb_start(struct musb *musb); extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index ae959746f77..ff9d6de2b74 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -484,6 +484,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) if (ret) goto err; + ret = -EINVAL; if (port > MUSB_DMA_NUM_CHANNELS || !port) goto err; if (is_tx) @@ -503,6 +504,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) dc = dma_request_slave_channel(dev, str); if (!dc) { dev_err(dev, "Falied to request %s.\n", str); + ret = -EPROBE_DEFER; goto err; } cppi41_channel->dc = dc; @@ -510,7 +512,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) return 0; err: cppi41_release_all_dma_chans(controller); - return -EINVAL; + return ret; } void dma_controller_destroy(struct dma_controller *c) @@ -526,7 +528,7 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *base) { struct cppi41_dma_controller *controller; - int ret; + int ret = 0; if (!musb->controller->of_node) { dev_err(musb->controller, "Need DT for the DMA engine.\n"); @@ -553,5 +555,7 @@ struct dma_controller *dma_controller_create(struct musb *musb, plat_get_fail: kfree(controller); kzalloc_fail: + if (ret == -EPROBE_DEFER) + return ERR_PTR(ret); return NULL; } diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 4047cbb91ba..1901f6fe580 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -121,6 +121,43 @@ struct dsps_glue { unsigned long last_timer; /* last timer data for each instance */ }; +static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) +{ + struct device *dev = musb->controller; + struct dsps_glue *glue = dev_get_drvdata(dev->parent); + + if (timeout == 0) + timeout = jiffies + msecs_to_jiffies(3); + + /* Never idle if active, or when VBUS timeout is not set as host */ + if (musb->is_active || (musb->a_wait_bcon == 0 && + musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { + dev_dbg(musb->controller, "%s active, deleting timer\n", + usb_otg_state_string(musb->xceiv->state)); + del_timer(&glue->timer); + glue->last_timer = jiffies; + return; + } + if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE) + return; + + if (!musb->g.dev.driver) + return; + + if (time_after(glue->last_timer, timeout) && + timer_pending(&glue->timer)) { + dev_dbg(musb->controller, + "Longer idle timer already pending, ignoring...\n"); + return; + } + glue->last_timer = timeout; + + dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", + usb_otg_state_string(musb->xceiv->state), + jiffies_to_msecs(timeout - jiffies)); + mod_timer(&glue->timer, timeout); +} + /** * dsps_musb_enable - enable interrupts */ @@ -143,6 +180,7 @@ static void dsps_musb_enable(struct musb *musb) /* Force the DRVVBUS IRQ so we can start polling for ID change. */ dsps_writel(reg_base, wrp->coreintr_set, (1 << wrp->drvvbus) << wrp->usb_shift); + dsps_musb_try_idle(musb, 0); } /** @@ -171,6 +209,7 @@ static void otg_timer(unsigned long _musb) const struct dsps_musb_wrapper *wrp = glue->wrp; u8 devctl; unsigned long flags; + int skip_session = 0; /* * We poll because DSPS IP's won't expose several OTG-critical @@ -183,10 +222,12 @@ static void otg_timer(unsigned long _musb) spin_lock_irqsave(&musb->lock, flags); switch (musb->xceiv->state) { case OTG_STATE_A_WAIT_BCON: - devctl &= ~MUSB_DEVCTL_SESSION; - dsps_writeb(musb->mregs, MUSB_DEVCTL, devctl); + dsps_writeb(musb->mregs, MUSB_DEVCTL, 0); + skip_session = 1; + /* fall */ - devctl = dsps_readb(musb->mregs, MUSB_DEVCTL); + case OTG_STATE_A_IDLE: + case OTG_STATE_B_IDLE: if (devctl & MUSB_DEVCTL_BDEVICE) { musb->xceiv->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); @@ -194,60 +235,21 @@ static void otg_timer(unsigned long _musb) musb->xceiv->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); } + if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session) + dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); + mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); break; case OTG_STATE_A_WAIT_VFALL: musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; dsps_writel(musb->ctrl_base, wrp->coreintr_set, MUSB_INTR_VBUSERROR << wrp->usb_shift); break; - case OTG_STATE_B_IDLE: - devctl = dsps_readb(mregs, MUSB_DEVCTL); - if (devctl & MUSB_DEVCTL_BDEVICE) - mod_timer(&glue->timer, - jiffies + wrp->poll_seconds * HZ); - else - musb->xceiv->state = OTG_STATE_A_IDLE; - break; default: break; } spin_unlock_irqrestore(&musb->lock, flags); } -static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) -{ - struct device *dev = musb->controller; - struct dsps_glue *glue = dev_get_drvdata(dev->parent); - - if (timeout == 0) - timeout = jiffies + msecs_to_jiffies(3); - - /* Never idle if active, or when VBUS timeout is not set as host */ - if (musb->is_active || (musb->a_wait_bcon == 0 && - musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { - dev_dbg(musb->controller, "%s active, deleting timer\n", - usb_otg_state_string(musb->xceiv->state)); - del_timer(&glue->timer); - glue->last_timer = jiffies; - return; - } - if (musb->port_mode == MUSB_PORT_MODE_HOST) - return; - - if (time_after(glue->last_timer, timeout) && - timer_pending(&glue->timer)) { - dev_dbg(musb->controller, - "Longer idle timer already pending, ignoring...\n"); - return; - } - glue->last_timer = timeout; - - dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", - usb_otg_state_string(musb->xceiv->state), - jiffies_to_msecs(timeout - jiffies)); - mod_timer(&glue->timer, timeout); -} - static irqreturn_t dsps_interrupt(int irq, void *hci) { struct musb *musb = hci; @@ -443,7 +445,7 @@ static int get_musb_port_mode(struct device *dev) case USB_DR_MODE_OTG: default: return MUSB_PORT_MODE_DUAL_ROLE; - }; + } } static int dsps_create_musb_pdev(struct dsps_glue *glue, @@ -535,6 +537,9 @@ static int dsps_probe(struct platform_device *pdev) struct dsps_glue *glue; int ret; + if (!strcmp(pdev->name, "musb-hdrc")) + return -ENODEV; + match = of_match_node(musb_dsps_of_match, pdev->dev.of_node); if (!match) { dev_err(&pdev->dev, "fail to get matching of_match struct\n"); @@ -628,7 +633,7 @@ static struct platform_driver dsps_usbss_driver = { .remove = dsps_remove, .driver = { .name = "musb-dsps", - .of_match_table = of_match_ptr(musb_dsps_of_match), + .of_match_table = musb_dsps_of_match, }, }; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 9a08679d204..d2d3a173b31 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1121,7 +1121,7 @@ static int musb_gadget_enable(struct usb_ep *ep, case USB_ENDPOINT_XFER_BULK: s = "bulk"; break; case USB_ENDPOINT_XFER_INT: s = "int"; break; default: s = "iso"; break; - }; s; }), + } s; }), musb_ep->is_in ? "IN" : "OUT", musb_ep->dma ? "dma, " : "", musb_ep->packet_sz); @@ -1790,6 +1790,10 @@ int musb_gadget_setup(struct musb *musb) musb->g.max_speed = USB_SPEED_HIGH; musb->g.speed = USB_SPEED_UNKNOWN; + MUSB_DEV_MODE(musb); + musb->xceiv->otg->default_a = 0; + musb->xceiv->state = OTG_STATE_B_IDLE; + /* this "gadget" abstracts/virtualizes the controller */ musb->g.name = musb_driver_name; musb->g.is_otg = 1; @@ -1855,6 +1859,8 @@ static int musb_gadget_start(struct usb_gadget *g, musb->xceiv->state = OTG_STATE_B_IDLE; spin_unlock_irqrestore(&musb->lock, flags); + musb_start(musb); + /* REVISIT: funcall to other code, which also * handles power budgeting ... this way also * ensures HdrcStart is indirectly called. diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 9a2b8c85f19..6582a20bec0 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -253,7 +253,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_BULK: s = "-bulk"; break; case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break; default: s = "-intr"; break; - }; s; }), + } s; }), epnum, buf + offset, len); /* Configure endpoint */ diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index a523950c2b3..9af6bba5eac 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -44,52 +44,6 @@ #include "musb_core.h" -/* -* Program the HDRC to start (enable interrupts, dma, etc.). -*/ -static void musb_start(struct musb *musb) -{ - void __iomem *regs = musb->mregs; - u8 devctl = musb_readb(regs, MUSB_DEVCTL); - - dev_dbg(musb->controller, "<== devctl %02x\n", devctl); - - /* Set INT enable registers, enable interrupts */ - musb->intrtxe = musb->epmask; - musb_writew(regs, MUSB_INTRTXE, musb->intrtxe); - musb->intrrxe = musb->epmask & 0xfffe; - musb_writew(regs, MUSB_INTRRXE, musb->intrrxe); - musb_writeb(regs, MUSB_INTRUSBE, 0xf7); - - musb_writeb(regs, MUSB_TESTMODE, 0); - - /* put into basic highspeed mode and start session */ - musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE - | MUSB_POWER_HSENAB - /* ENSUSPEND wedges tusb */ - /* | MUSB_POWER_ENSUSPEND */ - ); - - musb->is_active = 0; - devctl = musb_readb(regs, MUSB_DEVCTL); - devctl &= ~MUSB_DEVCTL_SESSION; - - /* session started after: - * (a) ID-grounded irq, host mode; - * (b) vbus present/connect IRQ, peripheral mode; - * (c) peripheral initiates, using SRP - */ - if (musb->port_mode != MUSB_PORT_MODE_HOST && - (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { - musb->is_active = 1; - } else { - devctl |= MUSB_DEVCTL_SESSION; - } - - musb_platform_enable(musb); - musb_writeb(regs, MUSB_DEVCTL, devctl); -} - static void musb_port_suspend(struct musb *musb, bool do_suspend) { struct usb_otg *otg = musb->xceiv->otg; @@ -266,6 +220,23 @@ int musb_hub_status_data(struct usb_hcd *hcd, char *buf) return retval; } +static int musb_has_gadget(struct musb *musb) +{ + /* + * In host-only mode we start a connection right away. In OTG mode + * we have to wait until we loaded a gadget. We don't really need a + * gadget if we operate as a host but we should not start a session + * as a device without a gadget or else we explode. + */ +#ifdef CONFIG_USB_MUSB_HOST + return 1; +#else + if (musb->port_mode == MUSB_PORT_MODE_HOST) + return 1; + return musb->g.dev.driver != NULL; +#endif +} + int musb_hub_control( struct usb_hcd *hcd, u16 typeReq, @@ -408,7 +379,7 @@ int musb_hub_control( * initialization logic, e.g. for OTG, or change any * logic relating to VBUS power-up. */ - if (!hcd->self.is_b_host) + if (!hcd->self.is_b_host && musb_has_gadget(musb)) musb_start(musb); break; case USB_PORT_FEAT_RESET: diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 59d2245db1c..2a408cdaf7b 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -38,6 +38,7 @@ #include <linux/delay.h> #include <linux/usb/musb-omap.h> #include <linux/usb/omap_control_usb.h> +#include <linux/of_platform.h> #include "musb_core.h" #include "omap2430.h" @@ -305,6 +306,9 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) default: dev_dbg(dev, "ID float\n"); } + + atomic_notifier_call_chain(&musb->xceiv->notifier, + musb->xceiv->last_event, NULL); } @@ -348,11 +352,21 @@ static int omap2430_musb_init(struct musb *musb) * up through ULPI. TWL4030-family PMICs include one, * which needs a driver, drivers aren't always needed. */ - if (dev->parent->of_node) + if (dev->parent->of_node) { + musb->phy = devm_phy_get(dev->parent, "usb2-phy"); + + /* We can't totally remove musb->xceiv as of now because + * musb core uses xceiv.state and xceiv.otg. Once we have + * a separate state machine to handle otg, these can be moved + * out of xceiv and then we can start using the generic PHY + * framework + */ musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0); - else + } else { musb->xceiv = devm_usb_get_phy_dev(dev, 0); + musb->phy = devm_phy_get(dev, "usb"); + } if (IS_ERR(musb->xceiv)) { status = PTR_ERR(musb->xceiv); @@ -364,6 +378,10 @@ static int omap2430_musb_init(struct musb *musb) return -EPROBE_DEFER; } + if (IS_ERR(musb->phy)) { + pr_err("HS USB OTG: no PHY configured\n"); + return PTR_ERR(musb->phy); + } musb->isr = omap2430_musb_interrupt; status = pm_runtime_get_sync(dev); @@ -397,7 +415,7 @@ static int omap2430_musb_init(struct musb *musb) if (glue->status != OMAP_MUSB_UNKNOWN) omap_musb_set_mailbox(glue); - usb_phy_init(musb->xceiv); + phy_init(musb->phy); pm_runtime_put_noidle(musb->controller); return 0; @@ -460,6 +478,7 @@ static int omap2430_musb_exit(struct musb *musb) del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); + phy_exit(musb->phy); return 0; } @@ -509,8 +528,12 @@ static int omap2430_probe(struct platform_device *pdev) glue->dev = &pdev->dev; glue->musb = musb; glue->status = OMAP_MUSB_UNKNOWN; + glue->control_otghs = ERR_PTR(-ENODEV); if (np) { + struct device_node *control_node; + struct platform_device *control_pdev; + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { dev_err(&pdev->dev, @@ -539,22 +562,20 @@ static int omap2430_probe(struct platform_device *pdev) of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); of_property_read_u32(np, "power", (u32 *)&pdata->power); config->multipoint = of_property_read_bool(np, "multipoint"); - pdata->has_mailbox = of_property_read_bool(np, - "ti,has-mailbox"); pdata->board_data = data; pdata->config = config; - } - if (pdata->has_mailbox) { - glue->control_otghs = omap_get_control_dev(); - if (IS_ERR(glue->control_otghs)) { - dev_vdbg(&pdev->dev, "Failed to get control device\n"); - ret = PTR_ERR(glue->control_otghs); - goto err2; + control_node = of_parse_phandle(np, "ctrl-module", 0); + if (control_node) { + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + ret = -EINVAL; + goto err2; + } + glue->control_otghs = &control_pdev->dev; } - } else { - glue->control_otghs = ERR_PTR(-ENODEV); } pdata->platform_ops = &omap2430_ops; @@ -638,7 +659,7 @@ static int omap2430_runtime_suspend(struct device *dev) OTG_INTERFSEL); omap2430_low_level_exit(musb); - usb_phy_set_suspend(musb->xceiv, 1); + phy_power_off(musb->phy); } return 0; @@ -653,8 +674,7 @@ static int omap2430_runtime_resume(struct device *dev) omap2430_low_level_init(musb); musb_writel(musb->mregs, OTG_INTERFSEL, musb->context.otg_interfsel); - - usb_phy_set_suspend(musb->xceiv, 0); + phy_power_on(musb->phy); } return 0; diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index b3b3ed72388..4432314d70e 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -1152,7 +1152,11 @@ static const struct musb_platform_ops tusb_ops = { .set_vbus = tusb_musb_set_vbus, }; -static u64 tusb_dmamask = DMA_BIT_MASK(32); +static const struct platform_device_info tusb_dev_info = { + .name = "musb-hdrc", + .id = PLATFORM_DEVID_AUTO, + .dma_mask = DMA_BIT_MASK(32), +}; static int tusb_probe(struct platform_device *pdev) { @@ -1160,7 +1164,7 @@ static int tusb_probe(struct platform_device *pdev) struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); struct platform_device *musb; struct tusb6010_glue *glue; - + struct platform_device_info pinfo; int ret = -ENOMEM; glue = kzalloc(sizeof(*glue), GFP_KERNEL); @@ -1169,18 +1173,7 @@ static int tusb_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); - if (!musb) { - dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; - } - - musb->dev.parent = &pdev->dev; - musb->dev.dma_mask = &tusb_dmamask; - musb->dev.coherent_dma_mask = tusb_dmamask; - glue->dev = &pdev->dev; - glue->musb = musb; pdata->platform_ops = &tusb_ops; @@ -1204,31 +1197,23 @@ static int tusb_probe(struct platform_device *pdev) musb_resources[2].end = pdev->resource[2].end; musb_resources[2].flags = pdev->resource[2].flags; - ret = platform_device_add_resources(musb, musb_resources, - ARRAY_SIZE(musb_resources)); - if (ret) { - dev_err(&pdev->dev, "failed to add resources\n"); - goto err3; - } - - ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); - if (ret) { - dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err3; - } - - ret = platform_device_add(musb); - if (ret) { - dev_err(&pdev->dev, "failed to register musb device\n"); + pinfo = tusb_dev_info; + pinfo.parent = &pdev->dev; + pinfo.res = musb_resources; + pinfo.num_res = ARRAY_SIZE(musb_resources); + pinfo.data = pdata; + pinfo.size_data = sizeof(*pdata); + + glue->musb = musb = platform_device_register_full(&pinfo); + if (IS_ERR(musb)) { + ret = PTR_ERR(musb); + dev_err(&pdev->dev, "failed to register musb device: %d\n", ret); goto err3; } return 0; err3: - platform_device_put(musb); - -err1: kfree(glue); err0: diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 59256b12f74..122446bf166 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -259,7 +259,7 @@ static int ux500_probe(struct platform_device *pdev) goto err1; } - clk = clk_get(&pdev->dev, "usb"); + clk = clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clock\n"); ret = PTR_ERR(clk); @@ -376,17 +376,10 @@ static int ux500_resume(struct device *dev) return 0; } - -static const struct dev_pm_ops ux500_pm_ops = { - .suspend = ux500_suspend, - .resume = ux500_resume, -}; - -#define DEV_PM_OPS (&ux500_pm_ops) -#else -#define DEV_PM_OPS NULL #endif +static SIMPLE_DEV_PM_OPS(ux500_pm_ops, ux500_suspend, ux500_resume); + static const struct of_device_id ux500_match[] = { { .compatible = "stericsson,db8500-musb", }, {} @@ -397,7 +390,7 @@ static struct platform_driver ux500_driver = { .remove = ux500_remove, .driver = { .name = "musb-ux500", - .pm = DEV_PM_OPS, + .pm = &ux500_pm_ops, .of_match_table = ux500_match, }, }; diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index d5589f9c60a..08e2f39027e 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -66,17 +66,6 @@ config OMAP_CONTROL_USB power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an additional register to power on USB3 PHY. -config OMAP_USB2 - tristate "OMAP USB2 PHY Driver" - depends on ARCH_OMAP2PLUS - select OMAP_CONTROL_USB - select USB_PHY - help - Enable this to support the transceiver that is part of SOC. This - driver takes care of all the PHY functionality apart from comparator. - The USB OTG controller communicates with the comparator using this - driver. - config OMAP_USB3 tristate "OMAP USB3 PHY Driver" depends on ARCH_OMAP2PLUS || COMPILE_TEST @@ -93,6 +82,7 @@ config AM335X_CONTROL_USB config AM335X_PHY_USB tristate "AM335x USB PHY Driver" + depends on ARM || COMPILE_TEST select USB_PHY select AM335X_CONTROL_USB select NOP_USB_XCEIV @@ -123,16 +113,6 @@ config SAMSUNG_USB3PHY Enable this to support Samsung USB 3.0 (Super Speed) phy controller for samsung SoCs. -config TWL4030_USB - tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS - select USB_PHY - help - Enable this to support the USB OTG transceiver on TWL4030 - family chips (including the TWL5030 and TPS659x0 devices). - This transceiver supports high and full speed devices plus, - in host mode, low speed. - config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS @@ -214,6 +194,19 @@ config USB_RCAR_PHY To compile this driver as a module, choose M here: the module will be called phy-rcar-usb. +config USB_RCAR_GEN2_PHY + tristate "Renesas R-Car Gen2 USB PHY support" + depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST + select USB_PHY + help + Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver. + It is typically used to control internal USB PHY for USBHS, + and to configure shared USB channels 0 and 2. + This driver supports R8A7790 and R8A7791. + + To compile this driver as a module, choose M here: the + module will be called phy-rcar-gen2-usb. + config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 2135e85f46e..022c1da7fb7 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -15,12 +15,10 @@ obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o -obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o obj-$(CONFIG_SAMSUNG_USB2PHY) += phy-samsung-usb2.o obj-$(CONFIG_SAMSUNG_USB3PHY) += phy-samsung-usb3.o -obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o @@ -29,5 +27,6 @@ obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o +obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o obj-$(CONFIG_USB_ULPI) += phy-ulpi.o obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c index 22cf07d62e4..634f49acd20 100644 --- a/drivers/usb/phy/phy-am335x-control.c +++ b/drivers/usb/phy/phy-am335x-control.c @@ -26,6 +26,41 @@ struct am335x_control_usb { #define USBPHY_OTGVDET_EN (1 << 19) #define USBPHY_OTGSESSEND_EN (1 << 20) +#define AM335X_PHY0_WK_EN (1 << 0) +#define AM335X_PHY1_WK_EN (1 << 8) + +static void am335x_phy_wkup(struct phy_control *phy_ctrl, u32 id, bool on) +{ + struct am335x_control_usb *usb_ctrl; + u32 val; + u32 reg; + + usb_ctrl = container_of(phy_ctrl, struct am335x_control_usb, phy_ctrl); + + switch (id) { + case 0: + reg = AM335X_PHY0_WK_EN; + break; + case 1: + reg = AM335X_PHY1_WK_EN; + break; + default: + WARN_ON(1); + return; + } + + spin_lock(&usb_ctrl->lock); + val = readl(usb_ctrl->wkup); + + if (on) + val |= reg; + else + val &= ~reg; + + writel(val, usb_ctrl->wkup); + spin_unlock(&usb_ctrl->lock); +} + static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on) { struct am335x_control_usb *usb_ctrl; @@ -59,6 +94,7 @@ static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on) static const struct phy_control ctrl_am335x = { .phy_power = am335x_phy_power, + .phy_wkup = am335x_phy_wkup, }; static const struct of_device_id omap_control_usb_id_table[] = { @@ -117,6 +153,12 @@ static int am335x_control_usb_probe(struct platform_device *pdev) ctrl_usb->phy_reg = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(ctrl_usb->phy_reg)) return PTR_ERR(ctrl_usb->phy_reg); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "wakeup"); + ctrl_usb->wkup = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ctrl_usb->wkup)) + return PTR_ERR(ctrl_usb->wkup); + spin_lock_init(&ctrl_usb->lock); ctrl_usb->phy_ctrl = *phy_ctrl; @@ -129,7 +171,7 @@ static struct platform_driver am335x_control_driver = { .driver = { .name = "am335x-control-usb", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(omap_control_usb_id_table), + .of_match_table = omap_control_usb_id_table, }, }; diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index c4d614d1f17..6370e50649d 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -53,21 +53,20 @@ static int am335x_phy_probe(struct platform_device *pdev) } ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, - USB_PHY_TYPE_USB2, 0, false, false); + USB_PHY_TYPE_USB2, 0, false); if (ret) return ret; ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy); if (ret) - goto err_add; + return ret; am_phy->usb_phy_gen.phy.init = am335x_init; am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown; platform_set_drvdata(pdev, am_phy); + return 0; -err_add: - usb_phy_gen_cleanup_phy(&am_phy->usb_phy_gen); return ret; } @@ -79,6 +78,40 @@ static int am335x_phy_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_RUNTIME + +static int am335x_phy_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct am335x_phy *am_phy = platform_get_drvdata(pdev); + + if (device_may_wakeup(dev)) + phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, true); + phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false); + return 0; +} + +static int am335x_phy_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct am335x_phy *am_phy = platform_get_drvdata(pdev); + + phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, true); + if (device_may_wakeup(dev)) + phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, false); + return 0; +} + +static const struct dev_pm_ops am335x_pm_ops = { + SET_RUNTIME_PM_OPS(am335x_phy_runtime_suspend, + am335x_phy_runtime_resume, NULL) +}; + +#define DEV_PM_OPS (&am335x_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + static const struct of_device_id am335x_phy_ids[] = { { .compatible = "ti,am335x-usb-phy" }, { } @@ -91,7 +124,8 @@ static struct platform_driver am335x_phy_driver = { .driver = { .name = "am335x-phy-driver", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(am335x_phy_ids), + .pm = DEV_PM_OPS, + .of_match_table = am335x_phy_ids, }, }; diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index fa7c9f9628b..7f3c73b967c 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -134,7 +134,7 @@ int write_ulpi(u8 addr, u8 data) /* Operations that will be called from OTG Finite State Machine */ /* Charge vbus for vbus pulsing in SRP */ -void fsl_otg_chrg_vbus(int on) +void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on) { u32 tmp; @@ -170,7 +170,7 @@ void fsl_otg_dischrg_vbus(int on) } /* A-device driver vbus, controlled through PP bit in PORTSC */ -void fsl_otg_drv_vbus(int on) +void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on) { u32 tmp; @@ -188,7 +188,7 @@ void fsl_otg_drv_vbus(int on) * Pull-up D+, signalling connect by periperal. Also used in * data-line pulsing in SRP */ -void fsl_otg_loc_conn(int on) +void fsl_otg_loc_conn(struct otg_fsm *fsm, int on) { u32 tmp; @@ -207,7 +207,7 @@ void fsl_otg_loc_conn(int on) * port. In host mode, controller will automatically send SOF. * Suspend will block the data on the port. */ -void fsl_otg_loc_sof(int on) +void fsl_otg_loc_sof(struct otg_fsm *fsm, int on) { u32 tmp; @@ -222,7 +222,7 @@ void fsl_otg_loc_sof(int on) } /* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */ -void fsl_otg_start_pulse(void) +void fsl_otg_start_pulse(struct otg_fsm *fsm) { u32 tmp; @@ -235,7 +235,7 @@ void fsl_otg_start_pulse(void) fsl_otg_loc_conn(1); #endif - fsl_otg_add_timer(b_data_pulse_tmr); + fsl_otg_add_timer(fsm, b_data_pulse_tmr); } void b_data_pulse_end(unsigned long foo) @@ -252,14 +252,14 @@ void b_data_pulse_end(unsigned long foo) void fsl_otg_pulse_vbus(void) { srp_wait_done = 0; - fsl_otg_chrg_vbus(1); + fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1); /* start the timer to end vbus charge */ - fsl_otg_add_timer(b_vbus_pulse_tmr); + fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr); } void b_vbus_pulse_end(unsigned long foo) { - fsl_otg_chrg_vbus(0); + fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0); /* * As USB3300 using the same a_sess_vld and b_sess_vld voltage @@ -267,7 +267,7 @@ void b_vbus_pulse_end(unsigned long foo) * residual voltage of vbus pulsing and A device pull up */ fsl_otg_dischrg_vbus(1); - fsl_otg_add_timer(b_srp_wait_tmr); + fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr); } void b_srp_end(unsigned long foo) @@ -289,7 +289,7 @@ void a_wait_enum(unsigned long foo) { VDBG("a_wait_enum timeout\n"); if (!fsl_otg_dev->phy.otg->host->b_hnp_enable) - fsl_otg_add_timer(a_wait_enum_tmr); + fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr); else otg_statemachine(&fsl_otg_dev->fsm); } @@ -375,8 +375,42 @@ void fsl_otg_uninit_timers(void) kfree(b_vbus_pulse_tmr); } +static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t) +{ + struct fsl_otg_timer *timer; + + /* REVISIT: use array of pointers to timers instead */ + switch (t) { + case A_WAIT_VRISE: + timer = a_wait_vrise_tmr; + break; + case A_WAIT_BCON: + timer = a_wait_vrise_tmr; + break; + case A_AIDL_BDIS: + timer = a_wait_vrise_tmr; + break; + case B_ASE0_BRST: + timer = a_wait_vrise_tmr; + break; + case B_SE0_SRP: + timer = a_wait_vrise_tmr; + break; + case B_SRP_FAIL: + timer = a_wait_vrise_tmr; + break; + case A_WAIT_ENUM: + timer = a_wait_vrise_tmr; + break; + default: + timer = NULL; + } + + return timer; +} + /* Add timer to timer list */ -void fsl_otg_add_timer(void *gtimer) +void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer) { struct fsl_otg_timer *timer = gtimer; struct fsl_otg_timer *tmp_timer; @@ -394,8 +428,19 @@ void fsl_otg_add_timer(void *gtimer) list_add_tail(&timer->list, &active_timers); } +static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t) +{ + struct fsl_otg_timer *timer; + + timer = fsl_otg_get_timer(t); + if (!timer) + return; + + fsl_otg_add_timer(fsm, timer); +} + /* Remove timer from the timer list; clear timeout status */ -void fsl_otg_del_timer(void *gtimer) +void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer) { struct fsl_otg_timer *timer = gtimer; struct fsl_otg_timer *tmp_timer, *del_tmp; @@ -405,6 +450,17 @@ void fsl_otg_del_timer(void *gtimer) list_del(&timer->list); } +static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t) +{ + struct fsl_otg_timer *timer; + + timer = fsl_otg_get_timer(t); + if (!timer) + return; + + fsl_otg_del_timer(fsm, timer); +} + /* * Reduce timer count by 1, and find timeout conditions. * Called by fsl_otg 1ms timer interrupt @@ -468,7 +524,7 @@ int fsl_otg_start_host(struct otg_fsm *fsm, int on) retval = dev->driver->pm->resume(dev); if (fsm->id) { /* default-b */ - fsl_otg_drv_vbus(1); + fsl_otg_drv_vbus(fsm, 1); /* * Workaround: b_host can't driver * vbus, but PP in PORTSC needs to @@ -493,7 +549,7 @@ int fsl_otg_start_host(struct otg_fsm *fsm, int on) retval = dev->driver->pm->suspend(dev); if (fsm->id) /* default-b */ - fsl_otg_drv_vbus(0); + fsl_otg_drv_vbus(fsm, 0); } otg_dev->host_working = 0; } @@ -757,8 +813,8 @@ static struct otg_fsm_ops fsl_otg_ops = { .loc_sof = fsl_otg_loc_sof, .start_pulse = fsl_otg_start_pulse, - .add_timer = fsl_otg_add_timer, - .del_timer = fsl_otg_del_timer, + .add_timer = fsl_otg_fsm_add_timer, + .del_timer = fsl_otg_fsm_del_timer, .start_host = fsl_otg_start_host, .start_gadget = fsl_otg_start_gadget, @@ -1011,7 +1067,7 @@ static int show_fsl_usb2_otg_state(struct device *dev, "b_bus_suspend: %d\n" "b_conn: %d\n" "b_se0_srp: %d\n" - "b_sess_end: %d\n" + "b_ssend_srp: %d\n" "b_sess_vld: %d\n" "id: %d\n", fsm->a_bus_req, @@ -1026,7 +1082,7 @@ static int show_fsl_usb2_otg_state(struct device *dev, fsm->b_bus_suspend, fsm->b_conn, fsm->b_se0_srp, - fsm->b_sess_end, + fsm->b_ssend_srp, fsm->b_sess_vld, fsm->id); size -= t; @@ -1057,7 +1113,7 @@ static long fsl_otg_ioctl(struct file *file, unsigned int cmd, break; case SET_A_SUSPEND_REQ: - fsl_otg_dev->fsm.a_suspend_req = arg; + fsl_otg_dev->fsm.a_suspend_req_inf = arg; break; case SET_A_BUS_DROP: diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h index e1859b8ef56..7365170a2f2 100644 --- a/drivers/usb/phy/phy-fsl-usb.h +++ b/drivers/usb/phy/phy-fsl-usb.h @@ -401,6 +401,6 @@ struct fsl_otg_config { #define GET_A_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 8, int) #define GET_B_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 9, int) -void fsl_otg_add_timer(void *timer); -void fsl_otg_del_timer(void *timer); +void fsl_otg_add_timer(struct otg_fsm *fsm, void *timer); +void fsl_otg_del_timer(struct otg_fsm *fsm, void *timer); void fsl_otg_pulse_vbus(void); diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c index 7f4596606e1..329c2d2f859 100644 --- a/drivers/usb/phy/phy-fsm-usb.c +++ b/drivers/usb/phy/phy-fsm-usb.c @@ -41,17 +41,17 @@ static int otg_set_protocol(struct otg_fsm *fsm, int protocol) fsm->protocol, protocol); /* stop old protocol */ if (fsm->protocol == PROTO_HOST) - ret = fsm->ops->start_host(fsm, 0); + ret = otg_start_host(fsm, 0); else if (fsm->protocol == PROTO_GADGET) - ret = fsm->ops->start_gadget(fsm, 0); + ret = otg_start_gadget(fsm, 0); if (ret) return ret; /* start new protocol */ if (protocol == PROTO_HOST) - ret = fsm->ops->start_host(fsm, 1); + ret = otg_start_host(fsm, 1); else if (protocol == PROTO_GADGET) - ret = fsm->ops->start_gadget(fsm, 1); + ret = otg_start_gadget(fsm, 1); if (ret) return ret; @@ -69,42 +69,50 @@ void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) { switch (old_state) { case OTG_STATE_B_IDLE: - otg_del_timer(fsm, b_se0_srp_tmr); + otg_del_timer(fsm, B_SE0_SRP); fsm->b_se0_srp = 0; + fsm->adp_sns = 0; + fsm->adp_prb = 0; break; case OTG_STATE_B_SRP_INIT: + fsm->data_pulse = 0; fsm->b_srp_done = 0; break; case OTG_STATE_B_PERIPHERAL: break; case OTG_STATE_B_WAIT_ACON: - otg_del_timer(fsm, b_ase0_brst_tmr); + otg_del_timer(fsm, B_ASE0_BRST); fsm->b_ase0_brst_tmout = 0; break; case OTG_STATE_B_HOST: break; case OTG_STATE_A_IDLE: + fsm->adp_prb = 0; break; case OTG_STATE_A_WAIT_VRISE: - otg_del_timer(fsm, a_wait_vrise_tmr); + otg_del_timer(fsm, A_WAIT_VRISE); fsm->a_wait_vrise_tmout = 0; break; case OTG_STATE_A_WAIT_BCON: - otg_del_timer(fsm, a_wait_bcon_tmr); + otg_del_timer(fsm, A_WAIT_BCON); fsm->a_wait_bcon_tmout = 0; break; case OTG_STATE_A_HOST: - otg_del_timer(fsm, a_wait_enum_tmr); + otg_del_timer(fsm, A_WAIT_ENUM); break; case OTG_STATE_A_SUSPEND: - otg_del_timer(fsm, a_aidl_bdis_tmr); + otg_del_timer(fsm, A_AIDL_BDIS); fsm->a_aidl_bdis_tmout = 0; - fsm->a_suspend_req = 0; + fsm->a_suspend_req_inf = 0; break; case OTG_STATE_A_PERIPHERAL: + otg_del_timer(fsm, A_BIDL_ADIS); + fsm->a_bidl_adis_tmout = 0; break; case OTG_STATE_A_WAIT_VFALL: - otg_del_timer(fsm, a_wait_vrise_tmr); + otg_del_timer(fsm, A_WAIT_VFALL); + fsm->a_wait_vfall_tmout = 0; + otg_del_timer(fsm, A_WAIT_VRISE); break; case OTG_STATE_A_VBUS_ERR: break; @@ -127,14 +135,19 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) otg_chrg_vbus(fsm, 0); otg_loc_conn(fsm, 0); otg_loc_sof(fsm, 0); + /* + * Driver is responsible for starting ADP probing + * if ADP sensing times out. + */ + otg_start_adp_sns(fsm); otg_set_protocol(fsm, PROTO_UNDEF); - otg_add_timer(fsm, b_se0_srp_tmr); + otg_add_timer(fsm, B_SE0_SRP); break; case OTG_STATE_B_SRP_INIT: otg_start_pulse(fsm); otg_loc_sof(fsm, 0); otg_set_protocol(fsm, PROTO_UNDEF); - otg_add_timer(fsm, b_srp_fail_tmr); + otg_add_timer(fsm, B_SRP_FAIL); break; case OTG_STATE_B_PERIPHERAL: otg_chrg_vbus(fsm, 0); @@ -147,7 +160,7 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) otg_loc_conn(fsm, 0); otg_loc_sof(fsm, 0); otg_set_protocol(fsm, PROTO_HOST); - otg_add_timer(fsm, b_ase0_brst_tmr); + otg_add_timer(fsm, B_ASE0_BRST); fsm->a_bus_suspend = 0; break; case OTG_STATE_B_HOST: @@ -163,6 +176,7 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) otg_chrg_vbus(fsm, 0); otg_loc_conn(fsm, 0); otg_loc_sof(fsm, 0); + otg_start_adp_prb(fsm); otg_set_protocol(fsm, PROTO_HOST); break; case OTG_STATE_A_WAIT_VRISE: @@ -170,14 +184,14 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) otg_loc_conn(fsm, 0); otg_loc_sof(fsm, 0); otg_set_protocol(fsm, PROTO_HOST); - otg_add_timer(fsm, a_wait_vrise_tmr); + otg_add_timer(fsm, A_WAIT_VRISE); break; case OTG_STATE_A_WAIT_BCON: otg_drv_vbus(fsm, 1); otg_loc_conn(fsm, 0); otg_loc_sof(fsm, 0); otg_set_protocol(fsm, PROTO_HOST); - otg_add_timer(fsm, a_wait_bcon_tmr); + otg_add_timer(fsm, A_WAIT_BCON); break; case OTG_STATE_A_HOST: otg_drv_vbus(fsm, 1); @@ -188,15 +202,15 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) * When HNP is triggered while a_bus_req = 0, a_host will * suspend too fast to complete a_set_b_hnp_en */ - if (!fsm->a_bus_req || fsm->a_suspend_req) - otg_add_timer(fsm, a_wait_enum_tmr); + if (!fsm->a_bus_req || fsm->a_suspend_req_inf) + otg_add_timer(fsm, A_WAIT_ENUM); break; case OTG_STATE_A_SUSPEND: otg_drv_vbus(fsm, 1); otg_loc_conn(fsm, 0); otg_loc_sof(fsm, 0); otg_set_protocol(fsm, PROTO_HOST); - otg_add_timer(fsm, a_aidl_bdis_tmr); + otg_add_timer(fsm, A_AIDL_BDIS); break; case OTG_STATE_A_PERIPHERAL: @@ -204,12 +218,14 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) otg_loc_sof(fsm, 0); otg_set_protocol(fsm, PROTO_GADGET); otg_drv_vbus(fsm, 1); + otg_add_timer(fsm, A_BIDL_ADIS); break; case OTG_STATE_A_WAIT_VFALL: otg_drv_vbus(fsm, 0); otg_loc_conn(fsm, 0); otg_loc_sof(fsm, 0); otg_set_protocol(fsm, PROTO_HOST); + otg_add_timer(fsm, A_WAIT_VFALL); break; case OTG_STATE_A_VBUS_ERR: otg_drv_vbus(fsm, 0); @@ -250,7 +266,8 @@ int otg_statemachine(struct otg_fsm *fsm) otg_set_state(fsm, OTG_STATE_A_IDLE); else if (fsm->b_sess_vld && fsm->otg->gadget) otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); - else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp) + else if ((fsm->b_bus_req || fsm->adp_change || fsm->power_up) && + fsm->b_ssend_srp && fsm->b_se0_srp) otg_set_state(fsm, OTG_STATE_B_SRP_INIT); break; case OTG_STATE_B_SRP_INIT: @@ -277,13 +294,14 @@ int otg_statemachine(struct otg_fsm *fsm) case OTG_STATE_B_HOST: if (!fsm->id || !fsm->b_sess_vld) otg_set_state(fsm, OTG_STATE_B_IDLE); - else if (!fsm->b_bus_req || !fsm->a_conn) + else if (!fsm->b_bus_req || !fsm->a_conn || fsm->test_device) otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); break; case OTG_STATE_A_IDLE: if (fsm->id) otg_set_state(fsm, OTG_STATE_B_IDLE); - else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det)) + else if (!fsm->a_bus_drop && (fsm->a_bus_req || + fsm->a_srp_det || fsm->adp_change || fsm->power_up)) otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE); break; case OTG_STATE_A_WAIT_VRISE: @@ -301,7 +319,7 @@ int otg_statemachine(struct otg_fsm *fsm) otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); break; case OTG_STATE_A_HOST: - if ((!fsm->a_bus_req || fsm->a_suspend_req) && + if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) && fsm->otg->host->b_hnp_enable) otg_set_state(fsm, OTG_STATE_A_SUSPEND); else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop) @@ -324,14 +342,14 @@ int otg_statemachine(struct otg_fsm *fsm) case OTG_STATE_A_PERIPHERAL: if (fsm->id || fsm->a_bus_drop) otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); - else if (fsm->b_bus_suspend) + else if (fsm->a_bidl_adis_tmout || fsm->b_bus_suspend) otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); else if (!fsm->a_vbus_vld) otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); break; case OTG_STATE_A_WAIT_VFALL: - if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld && - !fsm->b_conn)) + if (fsm->a_wait_vfall_tmout || fsm->id || fsm->a_bus_req || + (!fsm->a_sess_vld && !fsm->b_conn)) otg_set_state(fsm, OTG_STATE_A_IDLE); break; case OTG_STATE_A_VBUS_ERR: diff --git a/drivers/usb/phy/phy-fsm-usb.h b/drivers/usb/phy/phy-fsm-usb.h index fbe586206f3..7441b46a27f 100644 --- a/drivers/usb/phy/phy-fsm-usb.h +++ b/drivers/usb/phy/phy-fsm-usb.h @@ -34,45 +34,76 @@ #define PROTO_HOST (1) #define PROTO_GADGET (2) +enum otg_fsm_timer { + /* Standard OTG timers */ + A_WAIT_VRISE, + A_WAIT_VFALL, + A_WAIT_BCON, + A_AIDL_BDIS, + B_ASE0_BRST, + A_BIDL_ADIS, + + /* Auxiliary timers */ + B_SE0_SRP, + B_SRP_FAIL, + A_WAIT_ENUM, + + NUM_OTG_FSM_TIMERS, +}; + /* OTG state machine according to the OTG spec */ struct otg_fsm { /* Input */ + int id; + int adp_change; + int power_up; + int test_device; + int a_bus_drop; + int a_bus_req; + int a_srp_det; + int a_vbus_vld; + int b_conn; int a_bus_resume; int a_bus_suspend; int a_conn; + int b_bus_req; + int b_se0_srp; + int b_ssend_srp; + int b_sess_vld; + /* Auxilary inputs */ int a_sess_vld; - int a_srp_det; - int a_vbus_vld; int b_bus_resume; int b_bus_suspend; - int b_conn; - int b_se0_srp; - int b_sess_end; - int b_sess_vld; - int id; + + /* Output */ + int data_pulse; + int drv_vbus; + int loc_conn; + int loc_sof; + int adp_prb; + int adp_sns; /* Internal variables */ int a_set_b_hnp_en; int b_srp_done; int b_hnp_enable; + int a_clr_err; + + /* Informative variables */ + int a_bus_drop_inf; + int a_bus_req_inf; + int a_clr_err_inf; + int b_bus_req_inf; + /* Auxilary informative variables */ + int a_suspend_req_inf; /* Timeout indicator for timers */ int a_wait_vrise_tmout; + int a_wait_vfall_tmout; int a_wait_bcon_tmout; int a_aidl_bdis_tmout; int b_ase0_brst_tmout; - - /* Informative variables */ - int a_bus_drop; - int a_bus_req; - int a_clr_err; - int a_suspend_req; - int b_bus_req; - - /* Output */ - int drv_vbus; - int loc_conn; - int loc_sof; + int a_bidl_adis_tmout; struct otg_fsm_ops *ops; struct usb_otg *otg; @@ -83,65 +114,123 @@ struct otg_fsm { }; struct otg_fsm_ops { - void (*chrg_vbus)(int on); - void (*drv_vbus)(int on); - void (*loc_conn)(int on); - void (*loc_sof)(int on); - void (*start_pulse)(void); - void (*add_timer)(void *timer); - void (*del_timer)(void *timer); + void (*chrg_vbus)(struct otg_fsm *fsm, int on); + void (*drv_vbus)(struct otg_fsm *fsm, int on); + void (*loc_conn)(struct otg_fsm *fsm, int on); + void (*loc_sof)(struct otg_fsm *fsm, int on); + void (*start_pulse)(struct otg_fsm *fsm); + void (*start_adp_prb)(struct otg_fsm *fsm); + void (*start_adp_sns)(struct otg_fsm *fsm); + void (*add_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer); + void (*del_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer); int (*start_host)(struct otg_fsm *fsm, int on); int (*start_gadget)(struct otg_fsm *fsm, int on); }; -static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on) +static inline int otg_chrg_vbus(struct otg_fsm *fsm, int on) { - fsm->ops->chrg_vbus(on); + if (!fsm->ops->chrg_vbus) + return -EOPNOTSUPP; + fsm->ops->chrg_vbus(fsm, on); + return 0; } -static inline void otg_drv_vbus(struct otg_fsm *fsm, int on) +static inline int otg_drv_vbus(struct otg_fsm *fsm, int on) { + if (!fsm->ops->drv_vbus) + return -EOPNOTSUPP; if (fsm->drv_vbus != on) { fsm->drv_vbus = on; - fsm->ops->drv_vbus(on); + fsm->ops->drv_vbus(fsm, on); } + return 0; } -static inline void otg_loc_conn(struct otg_fsm *fsm, int on) +static inline int otg_loc_conn(struct otg_fsm *fsm, int on) { + if (!fsm->ops->loc_conn) + return -EOPNOTSUPP; if (fsm->loc_conn != on) { fsm->loc_conn = on; - fsm->ops->loc_conn(on); + fsm->ops->loc_conn(fsm, on); } + return 0; } -static inline void otg_loc_sof(struct otg_fsm *fsm, int on) +static inline int otg_loc_sof(struct otg_fsm *fsm, int on) { + if (!fsm->ops->loc_sof) + return -EOPNOTSUPP; if (fsm->loc_sof != on) { fsm->loc_sof = on; - fsm->ops->loc_sof(on); + fsm->ops->loc_sof(fsm, on); + } + return 0; +} + +static inline int otg_start_pulse(struct otg_fsm *fsm) +{ + if (!fsm->ops->start_pulse) + return -EOPNOTSUPP; + if (!fsm->data_pulse) { + fsm->data_pulse = 1; + fsm->ops->start_pulse(fsm); } + return 0; } -static inline void otg_start_pulse(struct otg_fsm *fsm) +static inline int otg_start_adp_prb(struct otg_fsm *fsm) { - fsm->ops->start_pulse(); + if (!fsm->ops->start_adp_prb) + return -EOPNOTSUPP; + if (!fsm->adp_prb) { + fsm->adp_sns = 0; + fsm->adp_prb = 1; + fsm->ops->start_adp_prb(fsm); + } + return 0; } -static inline void otg_add_timer(struct otg_fsm *fsm, void *timer) +static inline int otg_start_adp_sns(struct otg_fsm *fsm) { - fsm->ops->add_timer(timer); + if (!fsm->ops->start_adp_sns) + return -EOPNOTSUPP; + if (!fsm->adp_sns) { + fsm->adp_sns = 1; + fsm->ops->start_adp_sns(fsm); + } + return 0; } -static inline void otg_del_timer(struct otg_fsm *fsm, void *timer) +static inline int otg_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer) { - fsm->ops->del_timer(timer); + if (!fsm->ops->add_timer) + return -EOPNOTSUPP; + fsm->ops->add_timer(fsm, timer); + return 0; } -int otg_statemachine(struct otg_fsm *fsm); +static inline int otg_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer) +{ + if (!fsm->ops->del_timer) + return -EOPNOTSUPP; + fsm->ops->del_timer(fsm, timer); + return 0; +} -/* Defined by device specific driver, for different timer implementation */ -extern struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, - *a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr, - *a_wait_enum_tmr; +static inline int otg_start_host(struct otg_fsm *fsm, int on) +{ + if (!fsm->ops->start_host) + return -EOPNOTSUPP; + return fsm->ops->start_host(fsm, on); +} + +static inline int otg_start_gadget(struct otg_fsm *fsm, int on) +{ + if (!fsm->ops->start_gadget) + return -EOPNOTSUPP; + return fsm->ops->start_gadget(fsm, on); +} + +int otg_statemachine(struct otg_fsm *fsm); diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index efe59f3f7fd..fce3a9e9bb5 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -35,6 +35,9 @@ #include <linux/clk.h> #include <linux/regulator/consumer.h> #include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> +#include <linux/delay.h> #include "phy-generic.h" @@ -64,6 +67,23 @@ static int nop_set_suspend(struct usb_phy *x, int suspend) return 0; } +static void nop_reset_set(struct usb_phy_gen_xceiv *nop, int asserted) +{ + int value; + + if (!gpio_is_valid(nop->gpio_reset)) + return; + + value = asserted; + if (nop->reset_active_low) + value = !value; + + gpio_set_value_cansleep(nop->gpio_reset, value); + + if (!asserted) + usleep_range(10000, 20000); +} + int usb_gen_phy_init(struct usb_phy *phy) { struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev); @@ -74,13 +94,10 @@ int usb_gen_phy_init(struct usb_phy *phy) } if (!IS_ERR(nop->clk)) - clk_enable(nop->clk); + clk_prepare_enable(nop->clk); - if (!IS_ERR(nop->reset)) { - /* De-assert RESET */ - if (regulator_enable(nop->reset)) - dev_err(phy->dev, "Failed to de-assert reset\n"); - } + /* De-assert RESET */ + nop_reset_set(nop, 0); return 0; } @@ -90,14 +107,11 @@ void usb_gen_phy_shutdown(struct usb_phy *phy) { struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev); - if (!IS_ERR(nop->reset)) { - /* Assert RESET */ - if (regulator_disable(nop->reset)) - dev_err(phy->dev, "Failed to assert reset\n"); - } + /* Assert RESET */ + nop_reset_set(nop, 1); if (!IS_ERR(nop->clk)) - clk_disable(nop->clk); + clk_disable_unprepare(nop->clk); if (!IS_ERR(nop->vcc)) { if (regulator_disable(nop->vcc)) @@ -136,8 +150,7 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) } int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, - enum usb_phy_type type, u32 clk_rate, bool needs_vcc, - bool needs_reset) + enum usb_phy_type type, u32 clk_rate, bool needs_vcc) { int err; @@ -160,14 +173,6 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, } } - if (!IS_ERR(nop->clk)) { - err = clk_prepare(nop->clk); - if (err) { - dev_err(dev, "Error preparing clock\n"); - return err; - } - } - nop->vcc = devm_regulator_get(dev, "vcc"); if (IS_ERR(nop->vcc)) { dev_dbg(dev, "Error getting vcc regulator: %ld\n", @@ -176,12 +181,22 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, return -EPROBE_DEFER; } - nop->reset = devm_regulator_get(dev, "reset"); - if (IS_ERR(nop->reset)) { - dev_dbg(dev, "Error getting reset regulator: %ld\n", - PTR_ERR(nop->reset)); - if (needs_reset) - return -EPROBE_DEFER; + if (gpio_is_valid(nop->gpio_reset)) { + unsigned long gpio_flags; + + /* Assert RESET */ + if (nop->reset_active_low) + gpio_flags = GPIOF_OUT_INIT_LOW; + else + gpio_flags = GPIOF_OUT_INIT_HIGH; + + err = devm_gpio_request_one(dev, nop->gpio_reset, + gpio_flags, dev_name(dev)); + if (err) { + dev_err(dev, "Error requesting RESET GPIO %d\n", + nop->gpio_reset); + return err; + } } nop->dev = dev; @@ -200,13 +215,6 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, } EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy); -void usb_phy_gen_cleanup_phy(struct usb_phy_gen_xceiv *nop) -{ - if (!IS_ERR(nop->clk)) - clk_unprepare(nop->clk); -} -EXPORT_SYMBOL_GPL(usb_phy_gen_cleanup_phy); - static int usb_phy_gen_xceiv_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -217,31 +225,36 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev) int err; u32 clk_rate = 0; bool needs_vcc = false; - bool needs_reset = false; + + nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL); + if (!nop) + return -ENOMEM; + + nop->reset_active_low = true; /* default behaviour */ if (dev->of_node) { struct device_node *node = dev->of_node; + enum of_gpio_flags flags; if (of_property_read_u32(node, "clock-frequency", &clk_rate)) clk_rate = 0; needs_vcc = of_property_read_bool(node, "vcc-supply"); - needs_reset = of_property_read_bool(node, "reset-supply"); + nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios", + 0, &flags); + if (nop->gpio_reset == -EPROBE_DEFER) + return -EPROBE_DEFER; + + nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW; } else if (pdata) { type = pdata->type; clk_rate = pdata->clk_rate; needs_vcc = pdata->needs_vcc; - needs_reset = pdata->needs_reset; + nop->gpio_reset = pdata->gpio_reset; } - nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL); - if (!nop) - return -ENOMEM; - - - err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc, - needs_reset); + err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc); if (err) return err; @@ -252,15 +265,13 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev) if (err) { dev_err(&pdev->dev, "can't register transceiver, err: %d\n", err); - goto err_add; + return err; } platform_set_drvdata(pdev, nop); return 0; -err_add: - usb_phy_gen_cleanup_phy(nop); return err; } @@ -268,7 +279,6 @@ static int usb_phy_gen_xceiv_remove(struct platform_device *pdev) { struct usb_phy_gen_xceiv *nop = platform_get_drvdata(pdev); - usb_phy_gen_cleanup_phy(nop); usb_remove_phy(&nop->phy); return 0; diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h index 61687d5a965..d2a220d8173 100644 --- a/drivers/usb/phy/phy-generic.h +++ b/drivers/usb/phy/phy-generic.h @@ -6,15 +6,14 @@ struct usb_phy_gen_xceiv { struct device *dev; struct clk *clk; struct regulator *vcc; - struct regulator *reset; + int gpio_reset; + bool reset_active_low; }; int usb_gen_phy_init(struct usb_phy *phy); void usb_gen_phy_shutdown(struct usb_phy *phy); int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, - enum usb_phy_type type, u32 clk_rate, bool needs_vcc, - bool needs_reset); -void usb_phy_gen_cleanup_phy(struct usb_phy_gen_xceiv *nop); + enum usb_phy_type type, u32 clk_rate, bool needs_vcc); #endif diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index b2f29c9aebb..02799a5efcd 100644 --- a/drivers/usb/phy/phy-gpio-vbus-usb.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -241,7 +241,7 @@ static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend) /* platform driver interface */ -static int __init gpio_vbus_probe(struct platform_device *pdev) +static int gpio_vbus_probe(struct platform_device *pdev) { struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev); struct gpio_vbus_data *gpio_vbus; @@ -349,7 +349,7 @@ err_gpio: return err; } -static int __exit gpio_vbus_remove(struct platform_device *pdev) +static int gpio_vbus_remove(struct platform_device *pdev) { struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev); @@ -398,8 +398,6 @@ static const struct dev_pm_ops gpio_vbus_dev_pm_ops = { }; #endif -/* NOTE: the gpio-vbus device may *NOT* be hotplugged */ - MODULE_ALIAS("platform:gpio-vbus"); static struct platform_driver gpio_vbus_driver = { @@ -410,10 +408,11 @@ static struct platform_driver gpio_vbus_driver = { .pm = &gpio_vbus_dev_pm_ops, #endif }, - .remove = __exit_p(gpio_vbus_remove), + .probe = gpio_vbus_probe, + .remove = gpio_vbus_remove, }; -module_platform_driver_probe(gpio_vbus_driver, gpio_vbus_probe); +module_platform_driver(gpio_vbus_driver); MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver"); MODULE_AUTHOR("Philipp Zabel"); diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c index a4dda8e1256..09c5ace1edd 100644 --- a/drivers/usb/phy/phy-omap-control.c +++ b/drivers/usb/phy/phy-omap-control.c @@ -20,87 +20,77 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/err.h> #include <linux/io.h> #include <linux/clk.h> #include <linux/usb/omap_control_usb.h> -static struct omap_control_usb *control_usb; - -/** - * omap_get_control_dev - returns the device pointer for this control device - * - * This API should be called to get the device pointer for this control - * module device. This device pointer should be used for called other - * exported API's in this driver. - * - * To be used by PHY driver and glue driver. - */ -struct device *omap_get_control_dev(void) -{ - if (!control_usb) - return ERR_PTR(-ENODEV); - - return control_usb->dev; -} -EXPORT_SYMBOL_GPL(omap_get_control_dev); - /** - * omap_control_usb3_phy_power - power on/off the serializer using control - * module + * omap_control_usb_phy_power - power on/off the phy using control module reg * @dev: the control module device - * @on: 0 to off and 1 to on based on powering on or off the PHY - * - * usb3 PHY driver should call this API to power on or off the PHY. + * @on: 0 or 1, based on powering on or off the PHY */ -void omap_control_usb3_phy_power(struct device *dev, bool on) +void omap_control_usb_phy_power(struct device *dev, int on) { u32 val; unsigned long rate; - struct omap_control_usb *control_usb = dev_get_drvdata(dev); + struct omap_control_usb *control_usb; - if (control_usb->type != OMAP_CTRL_DEV_TYPE2) + if (IS_ERR(dev) || !dev) { + pr_err("%s: invalid device\n", __func__); return; + } - rate = clk_get_rate(control_usb->sys_clk); - rate = rate/1000000; - - val = readl(control_usb->phy_power); - - if (on) { - val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | - OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; - val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; - } else { - val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + control_usb = dev_get_drvdata(dev); + if (!control_usb) { + dev_err(dev, "%s: invalid control usb device\n", __func__); + return; } - writel(val, control_usb->phy_power); -} -EXPORT_SYMBOL_GPL(omap_control_usb3_phy_power); + if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) + return; -/** - * omap_control_usb_phy_power - power on/off the phy using control module reg - * @dev: the control module device - * @on: 0 or 1, based on powering on or off the PHY - */ -void omap_control_usb_phy_power(struct device *dev, int on) -{ - u32 val; - struct omap_control_usb *control_usb = dev_get_drvdata(dev); + val = readl(control_usb->power); - val = readl(control_usb->dev_conf); + switch (control_usb->type) { + case OMAP_CTRL_TYPE_USB2: + if (on) + val &= ~OMAP_CTRL_DEV_PHY_PD; + else + val |= OMAP_CTRL_DEV_PHY_PD; + break; - if (on) - val &= ~OMAP_CTRL_DEV_PHY_PD; - else - val |= OMAP_CTRL_DEV_PHY_PD; + case OMAP_CTRL_TYPE_PIPE3: + rate = clk_get_rate(control_usb->sys_clk); + rate = rate/1000000; + + if (on) { + val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | + OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); + val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << + OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; + } else { + val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; + val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << + OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + } + break; - writel(val, control_usb->dev_conf); + case OMAP_CTRL_TYPE_DRA7USB2: + if (on) + val &= ~OMAP_CTRL_USB2_PHY_PD; + else + val |= OMAP_CTRL_USB2_PHY_PD; + break; + default: + dev_err(dev, "%s: type %d not recognized\n", + __func__, control_usb->type); + break; + } + + writel(val, control_usb->power); } EXPORT_SYMBOL_GPL(omap_control_usb_phy_power); @@ -172,11 +162,19 @@ void omap_control_usb_set_mode(struct device *dev, { struct omap_control_usb *ctrl_usb; - if (IS_ERR(dev) || control_usb->type != OMAP_CTRL_DEV_TYPE1) + if (IS_ERR(dev) || !dev) return; ctrl_usb = dev_get_drvdata(dev); + if (!ctrl_usb) { + dev_err(dev, "Invalid control usb device\n"); + return; + } + + if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS) + return; + switch (mode) { case USB_MODE_HOST: omap_control_usb_host_mode(ctrl_usb); @@ -193,12 +191,46 @@ void omap_control_usb_set_mode(struct device *dev, } EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); +#ifdef CONFIG_OF + +static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS; +static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2; +static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; +static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; + +static const struct of_device_id omap_control_usb_id_table[] = { + { + .compatible = "ti,control-phy-otghs", + .data = &otghs_data, + }, + { + .compatible = "ti,control-phy-usb2", + .data = &usb2_data, + }, + { + .compatible = "ti,control-phy-pipe3", + .data = &pipe3_data, + }, + { + .compatible = "ti,control-phy-dra7usb2", + .data = &dra7usb2_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); +#endif + + static int omap_control_usb_probe(struct platform_device *pdev) { struct resource *res; - struct device_node *np = pdev->dev.of_node; - struct omap_control_usb_platform_data *pdata = - dev_get_platdata(&pdev->dev); + const struct of_device_id *of_id; + struct omap_control_usb *control_usb; + + of_id = of_match_device(of_match_ptr(omap_control_usb_id_table), + &pdev->dev); + if (!of_id) + return -EINVAL; control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb), GFP_KERNEL); @@ -207,40 +239,27 @@ static int omap_control_usb_probe(struct platform_device *pdev) return -ENOMEM; } - if (np) { - of_property_read_u32(np, "ti,type", &control_usb->type); - } else if (pdata) { - control_usb->type = pdata->type; - } else { - dev_err(&pdev->dev, "no pdata present\n"); - return -EINVAL; - } - - control_usb->dev = &pdev->dev; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "control_dev_conf"); - control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(control_usb->dev_conf)) - return PTR_ERR(control_usb->dev_conf); + control_usb->dev = &pdev->dev; + control_usb->type = *(enum omap_control_usb_type *)of_id->data; - if (control_usb->type == OMAP_CTRL_DEV_TYPE1) { + if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otghs_control"); control_usb->otghs_control = devm_ioremap_resource( &pdev->dev, res); if (IS_ERR(control_usb->otghs_control)) return PTR_ERR(control_usb->otghs_control); - } - - if (control_usb->type == OMAP_CTRL_DEV_TYPE2) { + } else { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "phy_power_usb"); - control_usb->phy_power = devm_ioremap_resource( - &pdev->dev, res); - if (IS_ERR(control_usb->phy_power)) - return PTR_ERR(control_usb->phy_power); + "power"); + control_usb->power = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(control_usb->power)) { + dev_err(&pdev->dev, "Couldn't get power register\n"); + return PTR_ERR(control_usb->power); + } + } + if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) { control_usb->sys_clk = devm_clk_get(control_usb->dev, "sys_clkin"); if (IS_ERR(control_usb->sys_clk)) { @@ -249,20 +268,11 @@ static int omap_control_usb_probe(struct platform_device *pdev) } } - dev_set_drvdata(control_usb->dev, control_usb); return 0; } -#ifdef CONFIG_OF -static const struct of_device_id omap_control_usb_id_table[] = { - { .compatible = "ti,omap-control-usb" }, - {} -}; -MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); -#endif - static struct platform_driver omap_control_usb_driver = { .probe = omap_control_usb_probe, .driver = { diff --git a/drivers/usb/phy/phy-omap-usb2.c b/drivers/usb/phy/phy-omap-usb2.c deleted file mode 100644 index d266861d24f..00000000000 --- a/drivers/usb/phy/phy-omap-usb2.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * omap-usb2.c - USB PHY, talking to musb controller in OMAP. - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Kishon Vijay Abraham I <kishon@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/of.h> -#include <linux/io.h> -#include <linux/usb/omap_usb.h> -#include <linux/usb/phy_companion.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/pm_runtime.h> -#include <linux/delay.h> -#include <linux/usb/omap_control_usb.h> - -/** - * omap_usb2_set_comparator - links the comparator present in the sytem with - * this phy - * @comparator - the companion phy(comparator) for this phy - * - * The phy companion driver should call this API passing the phy_companion - * filled with set_vbus and start_srp to be used by usb phy. - * - * For use by phy companion driver - */ -int omap_usb2_set_comparator(struct phy_companion *comparator) -{ - struct omap_usb *phy; - struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2); - - if (IS_ERR(x)) - return -ENODEV; - - phy = phy_to_omapusb(x); - phy->comparator = comparator; - return 0; -} -EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); - -static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) -{ - struct omap_usb *phy = phy_to_omapusb(otg->phy); - - if (!phy->comparator) - return -ENODEV; - - return phy->comparator->set_vbus(phy->comparator, enabled); -} - -static int omap_usb_start_srp(struct usb_otg *otg) -{ - struct omap_usb *phy = phy_to_omapusb(otg->phy); - - if (!phy->comparator) - return -ENODEV; - - return phy->comparator->start_srp(phy->comparator); -} - -static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - struct usb_phy *phy = otg->phy; - - otg->host = host; - if (!host) - phy->state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int omap_usb_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - struct usb_phy *phy = otg->phy; - - otg->gadget = gadget; - if (!gadget) - phy->state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int omap_usb2_suspend(struct usb_phy *x, int suspend) -{ - struct omap_usb *phy = phy_to_omapusb(x); - int ret; - - if (suspend && !phy->is_suspended) { - omap_control_usb_phy_power(phy->control_dev, 0); - pm_runtime_put_sync(phy->dev); - phy->is_suspended = 1; - } else if (!suspend && phy->is_suspended) { - ret = pm_runtime_get_sync(phy->dev); - if (ret < 0) { - dev_err(phy->dev, "get_sync failed with err %d\n", ret); - return ret; - } - omap_control_usb_phy_power(phy->control_dev, 1); - phy->is_suspended = 0; - } - - return 0; -} - -static int omap_usb2_probe(struct platform_device *pdev) -{ - struct omap_usb *phy; - struct usb_otg *otg; - - phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); - if (!phy) { - dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n"); - return -ENOMEM; - } - - otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); - if (!otg) { - dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n"); - return -ENOMEM; - } - - phy->dev = &pdev->dev; - - phy->phy.dev = phy->dev; - phy->phy.label = "omap-usb2"; - phy->phy.set_suspend = omap_usb2_suspend; - phy->phy.otg = otg; - phy->phy.type = USB_PHY_TYPE_USB2; - - phy->control_dev = omap_get_control_dev(); - if (IS_ERR(phy->control_dev)) { - dev_dbg(&pdev->dev, "Failed to get control device\n"); - return -ENODEV; - } - - phy->is_suspended = 1; - omap_control_usb_phy_power(phy->control_dev, 0); - - otg->set_host = omap_usb_set_host; - otg->set_peripheral = omap_usb_set_peripheral; - otg->set_vbus = omap_usb_set_vbus; - otg->start_srp = omap_usb_start_srp; - otg->phy = &phy->phy; - - phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); - if (IS_ERR(phy->wkupclk)) { - dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); - return PTR_ERR(phy->wkupclk); - } - clk_prepare(phy->wkupclk); - - phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); - if (IS_ERR(phy->optclk)) - dev_vdbg(&pdev->dev, "unable to get refclk960m\n"); - else - clk_prepare(phy->optclk); - - usb_add_phy_dev(&phy->phy); - - platform_set_drvdata(pdev, phy); - - pm_runtime_enable(phy->dev); - - return 0; -} - -static int omap_usb2_remove(struct platform_device *pdev) -{ - struct omap_usb *phy = platform_get_drvdata(pdev); - - clk_unprepare(phy->wkupclk); - if (!IS_ERR(phy->optclk)) - clk_unprepare(phy->optclk); - usb_remove_phy(&phy->phy); - - return 0; -} - -#ifdef CONFIG_PM_RUNTIME - -static int omap_usb2_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - - clk_disable(phy->wkupclk); - if (!IS_ERR(phy->optclk)) - clk_disable(phy->optclk); - - return 0; -} - -static int omap_usb2_runtime_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - int ret; - - ret = clk_enable(phy->wkupclk); - if (ret < 0) { - dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); - goto err0; - } - - if (!IS_ERR(phy->optclk)) { - ret = clk_enable(phy->optclk); - if (ret < 0) { - dev_err(phy->dev, "Failed to enable optclk %d\n", ret); - goto err1; - } - } - - return 0; - -err1: - clk_disable(phy->wkupclk); - -err0: - return ret; -} - -static const struct dev_pm_ops omap_usb2_pm_ops = { - SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume, - NULL) -}; - -#define DEV_PM_OPS (&omap_usb2_pm_ops) -#else -#define DEV_PM_OPS NULL -#endif - -#ifdef CONFIG_OF -static const struct of_device_id omap_usb2_id_table[] = { - { .compatible = "ti,omap-usb2" }, - {} -}; -MODULE_DEVICE_TABLE(of, omap_usb2_id_table); -#endif - -static struct platform_driver omap_usb2_driver = { - .probe = omap_usb2_probe, - .remove = omap_usb2_remove, - .driver = { - .name = "omap-usb2", - .owner = THIS_MODULE, - .pm = DEV_PM_OPS, - .of_match_table = of_match_ptr(omap_usb2_id_table), - }, -}; - -module_platform_driver(omap_usb2_driver); - -MODULE_ALIAS("platform: omap_usb2"); -MODULE_AUTHOR("Texas Instruments Inc."); -MODULE_DESCRIPTION("OMAP USB2 phy driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c index fc15694d303..0c6ba29bddd 100644 --- a/drivers/usb/phy/phy-omap-usb3.c +++ b/drivers/usb/phy/phy-omap-usb3.c @@ -26,6 +26,7 @@ #include <linux/pm_runtime.h> #include <linux/delay.h> #include <linux/usb/omap_control_usb.h> +#include <linux/of_platform.h> #define PLL_STATUS 0x00000004 #define PLL_GO 0x00000008 @@ -79,7 +80,7 @@ static struct usb_dpll_params *omap_usb3_get_dpll_params(unsigned long rate) return &dpll_map[i].params; } - return 0; + return NULL; } static int omap_usb3_suspend(struct usb_phy *x, int suspend) @@ -100,7 +101,7 @@ static int omap_usb3_suspend(struct usb_phy *x, int suspend) udelay(1); } while (--timeout); - omap_control_usb3_phy_power(phy->control_dev, 0); + omap_control_usb_phy_power(phy->control_dev, 0); phy->is_suspended = 1; } else if (!suspend && phy->is_suspended) { @@ -189,15 +190,21 @@ static int omap_usb3_init(struct usb_phy *x) if (ret) return ret; - omap_control_usb3_phy_power(phy->control_dev, 1); + omap_control_usb_phy_power(phy->control_dev, 1); return 0; } static int omap_usb3_probe(struct platform_device *pdev) { - struct omap_usb *phy; - struct resource *res; + struct omap_usb *phy; + struct resource *res; + struct device_node *node = pdev->dev.of_node; + struct device_node *control_node; + struct platform_device *control_pdev; + + if (!node) + return -EINVAL; phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); if (!phy) { @@ -239,13 +246,20 @@ static int omap_usb3_probe(struct platform_device *pdev) return -EINVAL; } - phy->control_dev = omap_get_control_dev(); - if (IS_ERR(phy->control_dev)) { - dev_dbg(&pdev->dev, "Failed to get control device\n"); - return -ENODEV; + control_node = of_parse_phandle(node, "ctrl-module", 0); + if (!control_node) { + dev_err(&pdev->dev, "Failed to get control device phandle\n"); + return -EINVAL; } + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + return -EINVAL; + } + + phy->control_dev = &control_pdev->dev; - omap_control_usb3_phy_power(phy->control_dev, 0); + omap_control_usb_phy_power(phy->control_dev, 0); usb_add_phy_dev(&phy->phy); platform_set_drvdata(pdev, phy); diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c new file mode 100644 index 00000000000..a99a6953f11 --- /dev/null +++ b/drivers/usb/phy/phy-rcar-gen2-usb.c @@ -0,0 +1,248 @@ +/* + * Renesas R-Car Gen2 USB phy driver + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_data/usb-rcar-gen2-phy.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/usb/otg.h> + +struct rcar_gen2_usb_phy_priv { + struct usb_phy phy; + void __iomem *base; + struct clk *clk; + spinlock_t lock; + int usecount; + u32 ugctrl2; +}; + +#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy) + +/* Low Power Status register */ +#define USBHS_LPSTS_REG 0x02 +#define USBHS_LPSTS_SUSPM (1 << 14) + +/* USB General control register */ +#define USBHS_UGCTRL_REG 0x80 +#define USBHS_UGCTRL_CONNECT (1 << 2) +#define USBHS_UGCTRL_PLLRESET (1 << 0) + +/* USB General control register 2 */ +#define USBHS_UGCTRL2_REG 0x84 +#define USBHS_UGCTRL2_USB0_PCI (1 << 4) +#define USBHS_UGCTRL2_USB0_HS (3 << 4) +#define USBHS_UGCTRL2_USB2_PCI (0 << 31) +#define USBHS_UGCTRL2_USB2_SS (1 << 31) + +/* USB General status register */ +#define USBHS_UGSTS_REG 0x88 +#define USBHS_UGSTS_LOCK (3 << 8) + +/* Enable USBHS internal phy */ +static int __rcar_gen2_usbhs_phy_enable(void __iomem *base) +{ + u32 val; + int i; + + /* USBHS PHY power on */ + val = ioread32(base + USBHS_UGCTRL_REG); + val &= ~USBHS_UGCTRL_PLLRESET; + iowrite32(val, base + USBHS_UGCTRL_REG); + + val = ioread16(base + USBHS_LPSTS_REG); + val |= USBHS_LPSTS_SUSPM; + iowrite16(val, base + USBHS_LPSTS_REG); + + for (i = 0; i < 20; i++) { + val = ioread32(base + USBHS_UGSTS_REG); + if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) { + val = ioread32(base + USBHS_UGCTRL_REG); + val |= USBHS_UGCTRL_CONNECT; + iowrite32(val, base + USBHS_UGCTRL_REG); + return 0; + } + udelay(1); + } + + /* Timed out waiting for the PLL lock */ + return -ETIMEDOUT; +} + +/* Disable USBHS internal phy */ +static int __rcar_gen2_usbhs_phy_disable(void __iomem *base) +{ + u32 val; + + /* USBHS PHY power off */ + val = ioread32(base + USBHS_UGCTRL_REG); + val &= ~USBHS_UGCTRL_CONNECT; + iowrite32(val, base + USBHS_UGCTRL_REG); + + val = ioread16(base + USBHS_LPSTS_REG); + val &= ~USBHS_LPSTS_SUSPM; + iowrite16(val, base + USBHS_LPSTS_REG); + + val = ioread32(base + USBHS_UGCTRL_REG); + val |= USBHS_UGCTRL_PLLRESET; + iowrite32(val, base + USBHS_UGCTRL_REG); + return 0; +} + +/* Setup USB channels */ +static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv) +{ + u32 val; + + clk_prepare_enable(priv->clk); + + /* Set USB channels in the USBHS UGCTRL2 register */ + val = ioread32(priv->base); + val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS); + val |= priv->ugctrl2; + iowrite32(val, priv->base); +} + +/* Shutdown USB channels */ +static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv) +{ + __rcar_gen2_usbhs_phy_disable(priv->base); + clk_disable_unprepare(priv->clk); +} + +static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend) +{ + struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); + unsigned long flags; + int retval; + + spin_lock_irqsave(&priv->lock, flags); + retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) : + __rcar_gen2_usbhs_phy_enable(priv->base); + spin_unlock_irqrestore(&priv->lock, flags); + return retval; +} + +static int rcar_gen2_usb_phy_init(struct usb_phy *phy) +{ + struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + /* + * Enable the clock and setup USB channels + * if it's the first user + */ + if (!priv->usecount++) + __rcar_gen2_usb_phy_init(priv); + spin_unlock_irqrestore(&priv->lock, flags); + return 0; +} + +static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy) +{ + struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (!priv->usecount) { + dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n"); + goto out; + } + + /* Disable everything if it's the last user */ + if (!--priv->usecount) + __rcar_gen2_usb_phy_shutdown(priv); +out: + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int rcar_gen2_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rcar_gen2_phy_platform_data *pdata; + struct rcar_gen2_usb_phy_priv *priv; + struct resource *res; + void __iomem *base; + struct clk *clk; + int retval; + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(dev, "No platform data\n"); + return -EINVAL; + } + + clk = devm_clk_get(&pdev->dev, "usbhs"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Can't get the clock\n"); + return PTR_ERR(clk); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(dev, "Memory allocation failed\n"); + return -ENOMEM; + } + + spin_lock_init(&priv->lock); + priv->clk = clk; + priv->base = base; + priv->ugctrl2 = pdata->chan0_pci ? + USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS; + priv->ugctrl2 |= pdata->chan2_pci ? + USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS; + priv->phy.dev = dev; + priv->phy.label = dev_name(dev); + priv->phy.init = rcar_gen2_usb_phy_init; + priv->phy.shutdown = rcar_gen2_usb_phy_shutdown; + priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend; + + retval = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2); + if (retval < 0) { + dev_err(dev, "Failed to add USB phy\n"); + return retval; + } + + platform_set_drvdata(pdev, priv); + + return retval; +} + +static int rcar_gen2_usb_phy_remove(struct platform_device *pdev) +{ + struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev); + + usb_remove_phy(&priv->phy); + + return 0; +} + +static struct platform_driver rcar_gen2_usb_phy_driver = { + .driver = { + .name = "usb_phy_rcar_gen2", + }, + .probe = rcar_gen2_usb_phy_probe, + .remove = rcar_gen2_usb_phy_remove, +}; + +module_platform_driver(rcar_gen2_usb_phy_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy"); +MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>"); diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c index ff70e4b19b9..b3ba86627b7 100644 --- a/drivers/usb/phy/phy-samsung-usb2.c +++ b/drivers/usb/phy/phy-samsung-usb2.c @@ -411,6 +411,7 @@ static int samsung_usb2phy_probe(struct platform_device *pdev) sphy->drv_data = drv_data; sphy->phy.dev = sphy->dev; sphy->phy.label = "samsung-usb2phy"; + sphy->phy.type = USB_PHY_TYPE_USB2; sphy->phy.init = samsung_usb2phy_init; sphy->phy.shutdown = samsung_usb2phy_shutdown; @@ -426,7 +427,7 @@ static int samsung_usb2phy_probe(struct platform_device *pdev) platform_set_drvdata(pdev, sphy); - return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2); + return usb_add_phy_dev(&sphy->phy); } static int samsung_usb2phy_remove(struct platform_device *pdev) diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c index c6eb22213de..cc0819248ac 100644 --- a/drivers/usb/phy/phy-samsung-usb3.c +++ b/drivers/usb/phy/phy-samsung-usb3.c @@ -271,6 +271,7 @@ static int samsung_usb3phy_probe(struct platform_device *pdev) sphy->clk = clk; sphy->phy.dev = sphy->dev; sphy->phy.label = "samsung-usb3phy"; + sphy->phy.type = USB_PHY_TYPE_USB3; sphy->phy.init = samsung_usb3phy_init; sphy->phy.shutdown = samsung_usb3phy_shutdown; sphy->drv_data = samsung_usbphy_get_driver_data(pdev); @@ -283,7 +284,7 @@ static int samsung_usb3phy_probe(struct platform_device *pdev) platform_set_drvdata(pdev, sphy); - return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB3); + return usb_add_phy_dev(&sphy->phy); } static int samsung_usb3phy_remove(struct platform_device *pdev) diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index e9cb1cb8abc..82232acf1ab 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -1090,7 +1090,7 @@ static struct platform_driver tegra_usb_phy_driver = { .driver = { .name = "tegra-phy", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(tegra_usb_phy_id_table), + .of_match_table = tegra_usb_phy_id_table, }, }; module_platform_driver(tegra_usb_phy_driver); diff --git a/drivers/usb/phy/phy-twl4030-usb.c b/drivers/usb/phy/phy-twl4030-usb.c deleted file mode 100644 index 90730c8762b..00000000000 --- a/drivers/usb/phy/phy-twl4030-usb.c +++ /dev/null @@ -1,794 +0,0 @@ -/* - * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller - * - * Copyright (C) 2004-2007 Texas Instruments - * Copyright (C) 2008 Nokia Corporation - * Contact: Felipe Balbi <felipe.balbi@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Current status: - * - HS USB ULPI mode works. - * - 3-pin mode support may be added in future. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/spinlock.h> -#include <linux/workqueue.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/usb/otg.h> -#include <linux/usb/musb-omap.h> -#include <linux/usb/ulpi.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/consumer.h> -#include <linux/err.h> -#include <linux/slab.h> - -/* Register defines */ - -#define MCPC_CTRL 0x30 -#define MCPC_CTRL_RTSOL (1 << 7) -#define MCPC_CTRL_EXTSWR (1 << 6) -#define MCPC_CTRL_EXTSWC (1 << 5) -#define MCPC_CTRL_VOICESW (1 << 4) -#define MCPC_CTRL_OUT64K (1 << 3) -#define MCPC_CTRL_RTSCTSSW (1 << 2) -#define MCPC_CTRL_HS_UART (1 << 0) - -#define MCPC_IO_CTRL 0x33 -#define MCPC_IO_CTRL_MICBIASEN (1 << 5) -#define MCPC_IO_CTRL_CTS_NPU (1 << 4) -#define MCPC_IO_CTRL_RXD_PU (1 << 3) -#define MCPC_IO_CTRL_TXDTYP (1 << 2) -#define MCPC_IO_CTRL_CTSTYP (1 << 1) -#define MCPC_IO_CTRL_RTSTYP (1 << 0) - -#define MCPC_CTRL2 0x36 -#define MCPC_CTRL2_MCPC_CK_EN (1 << 0) - -#define OTHER_FUNC_CTRL 0x80 -#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4) -#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2) - -#define OTHER_IFC_CTRL 0x83 -#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6) -#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5) -#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4) -#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3) -#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2) -#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0) - -#define OTHER_INT_EN_RISE 0x86 -#define OTHER_INT_EN_FALL 0x89 -#define OTHER_INT_STS 0x8C -#define OTHER_INT_LATCH 0x8D -#define OTHER_INT_VB_SESS_VLD (1 << 7) -#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */ -#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */ -#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */ -#define OTHER_INT_MANU (1 << 1) -#define OTHER_INT_ABNORMAL_STRESS (1 << 0) - -#define ID_STATUS 0x96 -#define ID_RES_FLOAT (1 << 4) -#define ID_RES_440K (1 << 3) -#define ID_RES_200K (1 << 2) -#define ID_RES_102K (1 << 1) -#define ID_RES_GND (1 << 0) - -#define POWER_CTRL 0xAC -#define POWER_CTRL_OTG_ENAB (1 << 5) - -#define OTHER_IFC_CTRL2 0xAF -#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4) -#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3) -#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2) -#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */ -#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0) -#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0) - -#define REG_CTRL_EN 0xB2 -#define REG_CTRL_ERROR 0xB5 -#define ULPI_I2C_CONFLICT_INTEN (1 << 0) - -#define OTHER_FUNC_CTRL2 0xB8 -#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0) - -/* following registers do not have separate _clr and _set registers */ -#define VBUS_DEBOUNCE 0xC0 -#define ID_DEBOUNCE 0xC1 -#define VBAT_TIMER 0xD3 -#define PHY_PWR_CTRL 0xFD -#define PHY_PWR_PHYPWD (1 << 0) -#define PHY_CLK_CTRL 0xFE -#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2) -#define PHY_CLK_CTRL_CLK32K_EN (1 << 1) -#define REQ_PHY_DPLL_CLK (1 << 0) -#define PHY_CLK_CTRL_STS 0xFF -#define PHY_DPLL_CLK (1 << 0) - -/* In module TWL_MODULE_PM_MASTER */ -#define STS_HW_CONDITIONS 0x0F - -/* In module TWL_MODULE_PM_RECEIVER */ -#define VUSB_DEDICATED1 0x7D -#define VUSB_DEDICATED2 0x7E -#define VUSB1V5_DEV_GRP 0x71 -#define VUSB1V5_TYPE 0x72 -#define VUSB1V5_REMAP 0x73 -#define VUSB1V8_DEV_GRP 0x74 -#define VUSB1V8_TYPE 0x75 -#define VUSB1V8_REMAP 0x76 -#define VUSB3V1_DEV_GRP 0x77 -#define VUSB3V1_TYPE 0x78 -#define VUSB3V1_REMAP 0x79 - -/* In module TWL4030_MODULE_INTBR */ -#define PMBR1 0x0D -#define GPIO_USB_4PIN_ULPI_2430C (3 << 0) - -struct twl4030_usb { - struct usb_phy phy; - struct device *dev; - - /* TWL4030 internal USB regulator supplies */ - struct regulator *usb1v5; - struct regulator *usb1v8; - struct regulator *usb3v1; - - /* for vbus reporting with irqs disabled */ - spinlock_t lock; - - /* pin configuration */ - enum twl4030_usb_mode usb_mode; - - int irq; - enum omap_musb_vbus_id_status linkstat; - bool vbus_supplied; - u8 asleep; - bool irq_enabled; - - struct delayed_work id_workaround_work; -}; - -/* internal define on top of container_of */ -#define phy_to_twl(x) container_of((x), struct twl4030_usb, phy) - -/*-------------------------------------------------------------------------*/ - -static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, - u8 module, u8 data, u8 address) -{ - u8 check; - - if ((twl_i2c_write_u8(module, data, address) >= 0) && - (twl_i2c_read_u8(module, &check, address) >= 0) && - (check == data)) - return 0; - dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", - 1, module, address, check, data); - - /* Failed once: Try again */ - if ((twl_i2c_write_u8(module, data, address) >= 0) && - (twl_i2c_read_u8(module, &check, address) >= 0) && - (check == data)) - return 0; - dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", - 2, module, address, check, data); - - /* Failed again: Return error */ - return -EBUSY; -} - -#define twl4030_usb_write_verify(twl, address, data) \ - twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address)) - -static inline int twl4030_usb_write(struct twl4030_usb *twl, - u8 address, u8 data) -{ - int ret = 0; - - ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address); - if (ret < 0) - dev_dbg(twl->dev, - "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); - return ret; -} - -static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) -{ - u8 data; - int ret = 0; - - ret = twl_i2c_read_u8(module, &data, address); - if (ret >= 0) - ret = data; - else - dev_dbg(twl->dev, - "TWL4030:readb[0x%x,0x%x] Error %d\n", - module, address, ret); - - return ret; -} - -static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address) -{ - return twl4030_readb(twl, TWL_MODULE_USB, address); -} - -/*-------------------------------------------------------------------------*/ - -static inline int -twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits) -{ - return twl4030_usb_write(twl, ULPI_SET(reg), bits); -} - -static inline int -twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) -{ - return twl4030_usb_write(twl, ULPI_CLR(reg), bits); -} - -/*-------------------------------------------------------------------------*/ - -static bool twl4030_is_driving_vbus(struct twl4030_usb *twl) -{ - int ret; - - ret = twl4030_usb_read(twl, PHY_CLK_CTRL_STS); - if (ret < 0 || !(ret & PHY_DPLL_CLK)) - /* - * if clocks are off, registers are not updated, - * but we can assume we don't drive VBUS in this case - */ - return false; - - ret = twl4030_usb_read(twl, ULPI_OTG_CTRL); - if (ret < 0) - return false; - - return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false; -} - -static enum omap_musb_vbus_id_status - twl4030_usb_linkstat(struct twl4030_usb *twl) -{ - int status; - enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN; - - twl->vbus_supplied = false; - - /* - * For ID/VBUS sensing, see manual section 15.4.8 ... - * except when using only battery backup power, two - * comparators produce VBUS_PRES and ID_PRES signals, - * which don't match docs elsewhere. But ... BIT(7) - * and BIT(2) of STS_HW_CONDITIONS, respectively, do - * seem to match up. If either is true the USB_PRES - * signal is active, the OTG module is activated, and - * its interrupt may be raised (may wake the system). - */ - status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS); - if (status < 0) - dev_err(twl->dev, "USB link status err %d\n", status); - else if (status & (BIT(7) | BIT(2))) { - if (status & BIT(7)) { - if (twl4030_is_driving_vbus(twl)) - status &= ~BIT(7); - else - twl->vbus_supplied = true; - } - - if (status & BIT(2)) - linkstat = OMAP_MUSB_ID_GROUND; - else if (status & BIT(7)) - linkstat = OMAP_MUSB_VBUS_VALID; - else - linkstat = OMAP_MUSB_VBUS_OFF; - } else { - if (twl->linkstat != OMAP_MUSB_UNKNOWN) - linkstat = OMAP_MUSB_VBUS_OFF; - } - - dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", - status, status, linkstat); - - /* REVISIT this assumes host and peripheral controllers - * are registered, and that both are active... - */ - - return linkstat; -} - -static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode) -{ - twl->usb_mode = mode; - - switch (mode) { - case T2_USB_MODE_ULPI: - twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL, - ULPI_IFC_CTRL_CARKITMODE); - twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); - twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL, - ULPI_FUNC_CTRL_XCVRSEL_MASK | - ULPI_FUNC_CTRL_OPMODE_MASK); - break; - case -1: - /* FIXME: power on defaults */ - break; - default: - dev_err(twl->dev, "unsupported T2 transceiver mode %d\n", - mode); - break; - }; -} - -static void twl4030_i2c_access(struct twl4030_usb *twl, int on) -{ - unsigned long timeout; - int val = twl4030_usb_read(twl, PHY_CLK_CTRL); - - if (val >= 0) { - if (on) { - /* enable DPLL to access PHY registers over I2C */ - val |= REQ_PHY_DPLL_CLK; - WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, - (u8)val) < 0); - - timeout = jiffies + HZ; - while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & - PHY_DPLL_CLK) - && time_before(jiffies, timeout)) - udelay(10); - if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & - PHY_DPLL_CLK)) - dev_err(twl->dev, "Timeout setting T2 HSUSB " - "PHY DPLL clock\n"); - } else { - /* let ULPI control the DPLL clock */ - val &= ~REQ_PHY_DPLL_CLK; - WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, - (u8)val) < 0); - } - } -} - -static void __twl4030_phy_power(struct twl4030_usb *twl, int on) -{ - u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); - - if (on) - pwr &= ~PHY_PWR_PHYPWD; - else - pwr |= PHY_PWR_PHYPWD; - - WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); -} - -static void twl4030_phy_power(struct twl4030_usb *twl, int on) -{ - int ret; - - if (on) { - ret = regulator_enable(twl->usb3v1); - if (ret) - dev_err(twl->dev, "Failed to enable usb3v1\n"); - - ret = regulator_enable(twl->usb1v8); - if (ret) - dev_err(twl->dev, "Failed to enable usb1v8\n"); - - /* - * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP - * in twl4030) resets the VUSB_DEDICATED2 register. This reset - * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to - * SLEEP. We work around this by clearing the bit after usv3v1 - * is re-activated. This ensures that VUSB3V1 is really active. - */ - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); - - ret = regulator_enable(twl->usb1v5); - if (ret) - dev_err(twl->dev, "Failed to enable usb1v5\n"); - - __twl4030_phy_power(twl, 1); - twl4030_usb_write(twl, PHY_CLK_CTRL, - twl4030_usb_read(twl, PHY_CLK_CTRL) | - (PHY_CLK_CTRL_CLOCKGATING_EN | - PHY_CLK_CTRL_CLK32K_EN)); - } else { - __twl4030_phy_power(twl, 0); - regulator_disable(twl->usb1v5); - regulator_disable(twl->usb1v8); - regulator_disable(twl->usb3v1); - } -} - -static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off) -{ - if (twl->asleep) - return; - - twl4030_phy_power(twl, 0); - twl->asleep = 1; - dev_dbg(twl->dev, "%s\n", __func__); -} - -static void __twl4030_phy_resume(struct twl4030_usb *twl) -{ - twl4030_phy_power(twl, 1); - twl4030_i2c_access(twl, 1); - twl4030_usb_set_mode(twl, twl->usb_mode); - if (twl->usb_mode == T2_USB_MODE_ULPI) - twl4030_i2c_access(twl, 0); -} - -static void twl4030_phy_resume(struct twl4030_usb *twl) -{ - if (!twl->asleep) - return; - __twl4030_phy_resume(twl); - twl->asleep = 0; - dev_dbg(twl->dev, "%s\n", __func__); - - /* - * XXX When VBUS gets driven after musb goes to A mode, - * ID_PRES related interrupts no longer arrive, why? - * Register itself is updated fine though, so we must poll. - */ - if (twl->linkstat == OMAP_MUSB_ID_GROUND) { - cancel_delayed_work(&twl->id_workaround_work); - schedule_delayed_work(&twl->id_workaround_work, HZ); - } -} - -static int twl4030_usb_ldo_init(struct twl4030_usb *twl) -{ - /* Enable writing to power configuration registers */ - twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, - TWL4030_PM_MASTER_PROTECT_KEY); - - twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2, - TWL4030_PM_MASTER_PROTECT_KEY); - - /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ - /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ - - /* input to VUSB3V1 LDO is from VBAT, not VBUS */ - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); - - /* Initialize 3.1V regulator */ - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); - - twl->usb3v1 = devm_regulator_get(twl->dev, "usb3v1"); - if (IS_ERR(twl->usb3v1)) - return -ENODEV; - - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); - - /* Initialize 1.5V regulator */ - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); - - twl->usb1v5 = devm_regulator_get(twl->dev, "usb1v5"); - if (IS_ERR(twl->usb1v5)) - return -ENODEV; - - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); - - /* Initialize 1.8V regulator */ - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); - - twl->usb1v8 = devm_regulator_get(twl->dev, "usb1v8"); - if (IS_ERR(twl->usb1v8)) - return -ENODEV; - - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); - - /* disable access to power configuration registers */ - twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, - TWL4030_PM_MASTER_PROTECT_KEY); - - return 0; -} - -static ssize_t twl4030_usb_vbus_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct twl4030_usb *twl = dev_get_drvdata(dev); - unsigned long flags; - int ret = -EINVAL; - - spin_lock_irqsave(&twl->lock, flags); - ret = sprintf(buf, "%s\n", - twl->vbus_supplied ? "on" : "off"); - spin_unlock_irqrestore(&twl->lock, flags); - - return ret; -} -static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL); - -static irqreturn_t twl4030_usb_irq(int irq, void *_twl) -{ - struct twl4030_usb *twl = _twl; - enum omap_musb_vbus_id_status status; - bool status_changed = false; - - status = twl4030_usb_linkstat(twl); - - spin_lock_irq(&twl->lock); - if (status >= 0 && status != twl->linkstat) { - twl->linkstat = status; - status_changed = true; - } - spin_unlock_irq(&twl->lock); - - if (status_changed) { - /* FIXME add a set_power() method so that B-devices can - * configure the charger appropriately. It's not always - * correct to consume VBUS power, and how much current to - * consume is a function of the USB configuration chosen - * by the host. - * - * REVISIT usb_gadget_vbus_connect(...) as needed, ditto - * its disconnect() sibling, when changing to/from the - * USB_LINK_VBUS state. musb_hdrc won't care until it - * starts to handle softconnect right. - */ - omap_musb_mailbox(status); - } - sysfs_notify(&twl->dev->kobj, NULL, "vbus"); - - return IRQ_HANDLED; -} - -static void twl4030_id_workaround_work(struct work_struct *work) -{ - struct twl4030_usb *twl = container_of(work, struct twl4030_usb, - id_workaround_work.work); - enum omap_musb_vbus_id_status status; - bool status_changed = false; - - status = twl4030_usb_linkstat(twl); - - spin_lock_irq(&twl->lock); - if (status >= 0 && status != twl->linkstat) { - twl->linkstat = status; - status_changed = true; - } - spin_unlock_irq(&twl->lock); - - if (status_changed) { - dev_dbg(twl->dev, "handle missing status change to %d\n", - status); - omap_musb_mailbox(status); - } - - /* don't schedule during sleep - irq works right then */ - if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) { - cancel_delayed_work(&twl->id_workaround_work); - schedule_delayed_work(&twl->id_workaround_work, HZ); - } -} - -static int twl4030_usb_phy_init(struct usb_phy *phy) -{ - struct twl4030_usb *twl = phy_to_twl(phy); - enum omap_musb_vbus_id_status status; - - /* - * Start in sleep state, we'll get called through set_suspend() - * callback when musb is runtime resumed and it's time to start. - */ - __twl4030_phy_power(twl, 0); - twl->asleep = 1; - - status = twl4030_usb_linkstat(twl); - twl->linkstat = status; - - if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID) - omap_musb_mailbox(twl->linkstat); - - sysfs_notify(&twl->dev->kobj, NULL, "vbus"); - return 0; -} - -static int twl4030_set_suspend(struct usb_phy *x, int suspend) -{ - struct twl4030_usb *twl = phy_to_twl(x); - - if (suspend) - twl4030_phy_suspend(twl, 1); - else - twl4030_phy_resume(twl); - - return 0; -} - -static int twl4030_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - if (!otg) - return -ENODEV; - - otg->gadget = gadget; - if (!gadget) - otg->phy->state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - if (!otg) - return -ENODEV; - - otg->host = host; - if (!host) - otg->phy->state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int twl4030_usb_probe(struct platform_device *pdev) -{ - struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev); - struct twl4030_usb *twl; - int status, err; - struct usb_otg *otg; - struct device_node *np = pdev->dev.of_node; - - twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL); - if (!twl) - return -ENOMEM; - - if (np) - of_property_read_u32(np, "usb_mode", - (enum twl4030_usb_mode *)&twl->usb_mode); - else if (pdata) - twl->usb_mode = pdata->usb_mode; - else { - dev_err(&pdev->dev, "twl4030 initialized without pdata\n"); - return -EINVAL; - } - - otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL); - if (!otg) - return -ENOMEM; - - twl->dev = &pdev->dev; - twl->irq = platform_get_irq(pdev, 0); - twl->vbus_supplied = false; - twl->asleep = 1; - twl->linkstat = OMAP_MUSB_UNKNOWN; - - twl->phy.dev = twl->dev; - twl->phy.label = "twl4030"; - twl->phy.otg = otg; - twl->phy.type = USB_PHY_TYPE_USB2; - twl->phy.set_suspend = twl4030_set_suspend; - twl->phy.init = twl4030_usb_phy_init; - - otg->phy = &twl->phy; - otg->set_host = twl4030_set_host; - otg->set_peripheral = twl4030_set_peripheral; - - /* init spinlock for workqueue */ - spin_lock_init(&twl->lock); - - INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work); - - err = twl4030_usb_ldo_init(twl); - if (err) { - dev_err(&pdev->dev, "ldo init failed\n"); - return err; - } - usb_add_phy_dev(&twl->phy); - - platform_set_drvdata(pdev, twl); - if (device_create_file(&pdev->dev, &dev_attr_vbus)) - dev_warn(&pdev->dev, "could not create sysfs file\n"); - - /* Our job is to use irqs and status from the power module - * to keep the transceiver disabled when nothing's connected. - * - * FIXME we actually shouldn't start enabling it until the - * USB controller drivers have said they're ready, by calling - * set_host() and/or set_peripheral() ... OTG_capable boards - * need both handles, otherwise just one suffices. - */ - twl->irq_enabled = true; - status = devm_request_threaded_irq(twl->dev, twl->irq, NULL, - twl4030_usb_irq, IRQF_TRIGGER_FALLING | - IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl); - if (status < 0) { - dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", - twl->irq, status); - return status; - } - - dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); - return 0; -} - -static int twl4030_usb_remove(struct platform_device *pdev) -{ - struct twl4030_usb *twl = platform_get_drvdata(pdev); - int val; - - cancel_delayed_work(&twl->id_workaround_work); - device_remove_file(twl->dev, &dev_attr_vbus); - - /* set transceiver mode to power on defaults */ - twl4030_usb_set_mode(twl, -1); - - /* autogate 60MHz ULPI clock, - * clear dpll clock request for i2c access, - * disable 32KHz - */ - val = twl4030_usb_read(twl, PHY_CLK_CTRL); - if (val >= 0) { - val |= PHY_CLK_CTRL_CLOCKGATING_EN; - val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK); - twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val); - } - - /* disable complete OTG block */ - twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); - - if (!twl->asleep) - twl4030_phy_power(twl, 0); - - return 0; -} - -#ifdef CONFIG_OF -static const struct of_device_id twl4030_usb_id_table[] = { - { .compatible = "ti,twl4030-usb" }, - {} -}; -MODULE_DEVICE_TABLE(of, twl4030_usb_id_table); -#endif - -static struct platform_driver twl4030_usb_driver = { - .probe = twl4030_usb_probe, - .remove = twl4030_usb_remove, - .driver = { - .name = "twl4030_usb", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(twl4030_usb_id_table), - }, -}; - -static int __init twl4030_usb_init(void) -{ - return platform_driver_register(&twl4030_usb_driver); -} -subsys_initcall(twl4030_usb_init); - -static void __exit twl4030_usb_exit(void) -{ - platform_driver_unregister(&twl4030_usb_driver); -} -module_exit(twl4030_usb_exit); - -MODULE_ALIAS("platform:twl4030_usb"); -MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation"); -MODULE_DESCRIPTION("TWL4030 USB transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c index 16dbc938267..30e8a61552d 100644 --- a/drivers/usb/phy/phy-twl6030-usb.c +++ b/drivers/usb/phy/phy-twl6030-usb.c @@ -33,6 +33,7 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/of.h> /* usb register definitions */ #define USB_VENDOR_ID_LSB 0x00 diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c index 7c22a5390fc..18bb8264b5a 100644 --- a/drivers/usb/phy/phy-ulpi-viewport.c +++ b/drivers/usb/phy/phy-ulpi-viewport.c @@ -36,7 +36,7 @@ static int ulpi_viewport_wait(void __iomem *view, u32 mask) return 0; udelay(1); - }; + } return -ETIMEDOUT; } diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index a9984c700d2..1b74523e1fe 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -98,7 +98,7 @@ struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type) ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL); if (!ptr) - return NULL; + return ERR_PTR(-ENOMEM); phy = usb_get_phy(type); if (!IS_ERR(phy)) { diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig index 019bf7e49ee..1c4195abc10 100644 --- a/drivers/usb/renesas_usbhs/Kconfig +++ b/drivers/usb/renesas_usbhs/Kconfig @@ -4,7 +4,7 @@ config USB_RENESAS_USBHS tristate 'Renesas USBHS controller' - depends on USB_GADGET && GENERIC_HARDIRQS + depends on USB_GADGET default n help Renesas USBHS is a discrete USB host and peripheral controller chip diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index c454bfa22a1..ddb9c51f2c9 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -60,7 +60,7 @@ config USB_SERIAL_SIMPLE - Suunto ANT+ USB device. - Fundamental Software dongle. - HP4x calculators - - a number of Motoroloa phones + - a number of Motorola phones - Siemens USB/MPI adapter. - ViVOtech ViVOpay USB device. - Infineon Modem Flashloader USB interface diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 781426230d6..6e1b69d0f5f 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -279,7 +279,7 @@ static void cyberjack_read_int_callback(struct urb *urb) old_rdtodo = priv->rdtodo; - if (old_rdtodo + size < old_rdtodo) { + if (old_rdtodo > SHRT_MAX - size) { dev_dbg(dev, "To many bulk_in urbs to do.\n"); spin_unlock(&priv->lock); goto resubmit; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c45f9c0a1b3..9ced8937a8f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -904,6 +904,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) }, /* Crucible Devices */ { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) }, { } /* Terminating entry */ }; @@ -1966,8 +1967,16 @@ static int ftdi_process_packet(struct usb_serial_port *port, port->icount.dsr++; if (diff_status & FTDI_RS0_RI) port->icount.rng++; - if (diff_status & FTDI_RS0_RLSD) + if (diff_status & FTDI_RS0_RLSD) { + struct tty_struct *tty; + port->icount.dcd++; + tty = tty_port_tty_get(&port->port); + if (tty) + usb_serial_handle_dcd_change(port, tty, + status & FTDI_RS0_RLSD); + tty_kref_put(tty); + } wake_up_interruptible(&port->port.delta_msr_wait); priv->prev_status = status; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 1b8af461b52..a7019d1e305 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1307,3 +1307,9 @@ * Manufacturer: Crucible Technologies */ #define FTDI_CT_COMET_PID 0x8e08 + +/* + * Product: Z3X Box + * Manufacturer: Smart GSM Team + */ +#define FTDI_Z3X_PID 0x0011 diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 1f31e6b4c25..2b01ec8651c 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -7,7 +7,6 @@ * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -37,7 +36,6 @@ MODULE_PARM_DESC(product, "User specified USB idProduct"); static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ -/* All of the device info needed for the Generic Serial Converter */ struct usb_serial_driver usb_serial_generic_device = { .driver = { .owner = THIS_MODULE, @@ -66,7 +64,6 @@ int usb_serial_generic_register(void) generic_device_ids[0].match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT; - /* register our generic driver with ourselves */ retval = usb_serial_register_drivers(serial_drivers, "usbserial_generic", generic_device_ids); #endif @@ -76,7 +73,6 @@ int usb_serial_generic_register(void) void usb_serial_generic_deregister(void) { #ifdef CONFIG_USB_SERIAL_GENERIC - /* remove our generic driver */ usb_serial_deregister_drivers(serial_drivers); #endif } @@ -86,13 +82,11 @@ int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port int result = 0; unsigned long flags; - /* clear the throttle flags */ spin_lock_irqsave(&port->lock, flags); port->throttled = 0; port->throttle_req = 0; spin_unlock_irqrestore(&port->lock, flags); - /* if we have a bulk endpoint, start reading from it */ if (port->bulk_in_size) result = usb_serial_generic_submit_read_urbs(port, GFP_KERNEL); @@ -127,12 +121,16 @@ int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port, } /** - * usb_serial_generic_write_start - kick off an URB write - * @port: Pointer to the &struct usb_serial_port data + * usb_serial_generic_write_start - start writing buffered data + * @port: usb-serial port + * @mem_flags: flags to use for memory allocations + * + * Serialised using USB_SERIAL_WRITE_BUSY flag. * - * Returns zero on success, or a negative errno value + * Return: Zero on success or if busy, otherwise a negative errno value. */ -static int usb_serial_generic_write_start(struct usb_serial_port *port) +int usb_serial_generic_write_start(struct usb_serial_port *port, + gfp_t mem_flags) { struct urb *urb; int count, result; @@ -163,7 +161,7 @@ retry: spin_unlock_irqrestore(&port->lock, flags); clear_bit(i, &port->write_urbs_free); - result = usb_submit_urb(urb, GFP_ATOMIC); + result = usb_submit_urb(urb, mem_flags); if (result) { dev_err_console(port, "%s - error submitting urb: %d\n", __func__, result); @@ -175,34 +173,34 @@ retry: clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); return result; } - - /* Try sending off another urb, unless in irq context (in which case - * there will be no free urb). */ - if (!in_irq()) + /* + * Try sending off another urb, unless called from completion handler + * (in which case there will be no free urb or no data). + */ + if (mem_flags != GFP_ATOMIC) goto retry; clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); return 0; } +EXPORT_SYMBOL_GPL(usb_serial_generic_write_start); /** - * usb_serial_generic_write - generic write function for serial USB devices - * @tty: Pointer to &struct tty_struct for the device - * @port: Pointer to the &usb_serial_port structure for the device - * @buf: Pointer to the data to write - * @count: Number of bytes to write + * usb_serial_generic_write - generic write function + * @tty: tty for the port + * @port: usb-serial port + * @buf: data to write + * @count: number of bytes to write * - * Returns the number of characters actually written, which may be anything - * from zero to @count. If an error occurs, it returns the negative errno - * value. + * Return: The number of characters buffered, which may be anything from + * zero to @count, or a negative errno value. */ int usb_serial_generic_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { int result; - /* only do something if we have a bulk out endpoint */ if (!port->bulk_out_size) return -ENODEV; @@ -210,7 +208,7 @@ int usb_serial_generic_write(struct tty_struct *tty, return 0; count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock); - result = usb_serial_generic_write_start(port); + result = usb_serial_generic_write_start(port, GFP_KERNEL); if (result) return result; @@ -337,10 +335,11 @@ void usb_serial_generic_process_read_urb(struct urb *urb) if (!urb->actual_length) return; - - /* The per character mucking around with sysrq path it too slow for - stuff like 3G modems, so shortcircuit it in the 99.9999999% of cases - where the USB serial is not a console anyway */ + /* + * The per character mucking around with sysrq path it too slow for + * stuff like 3G modems, so shortcircuit it in the 99.9999999% of + * cases where the USB serial is not a console anyway. + */ if (!port->port.console || !port->sysrq) tty_insert_flip_string(&port->port, ch, urb->actual_length); else { @@ -413,7 +412,7 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) kfifo_reset_out(&port->write_fifo); spin_unlock_irqrestore(&port->lock, flags); } else { - usb_serial_generic_write_start(port); + usb_serial_generic_write_start(port, GFP_ATOMIC); } usb_serial_port_softint(port); @@ -425,8 +424,6 @@ void usb_serial_generic_throttle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; unsigned long flags; - /* Set the throttle request flag. It will be picked up - * by usb_serial_generic_read_bulk_callback(). */ spin_lock_irqsave(&port->lock, flags); port->throttle_req = 1; spin_unlock_irqrestore(&port->lock, flags); @@ -438,7 +435,6 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; int was_throttled; - /* Clear the throttle flags */ spin_lock_irq(&port->lock); was_throttled = port->throttled; port->throttled = port->throttle_req = 0; @@ -558,10 +554,10 @@ int usb_serial_handle_break(struct usb_serial_port *port) EXPORT_SYMBOL_GPL(usb_serial_handle_break); /** - * usb_serial_handle_dcd_change - handle a change of carrier detect state - * @port: usb_serial_port structure for the open port - * @tty: tty_struct structure for the port - * @status: new carrier detect status, nonzero if active + * usb_serial_handle_dcd_change - handle a change of carrier detect state + * @port: usb-serial port + * @tty: tty for the port + * @status: new carrier detect status, nonzero if active */ void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, struct tty_struct *tty, unsigned int status) @@ -570,6 +566,16 @@ void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, dev_dbg(&usb_port->dev, "%s - status %d\n", __func__, status); + if (tty) { + struct tty_ldisc *ld = tty_ldisc_ref(tty); + + if (ld) { + if (ld->ops->dcd_change) + ld->ops->dcd_change(tty, status); + tty_ldisc_deref(ld); + } + } + if (status) wake_up_interruptible(&port->open_wait); else if (tty && !C_CLOCAL(tty)) @@ -595,7 +601,7 @@ int usb_serial_generic_resume(struct usb_serial *serial) } if (port->bulk_out_size) { - r = usb_serial_generic_write_start(port); + r = usb_serial_generic_write_start(port, GFP_NOIO); if (r < 0) c++; } diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 84657e07dc5..439c951f261 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -455,7 +455,7 @@ static int parport_prologue(struct parport *pp) return -1; } mos_parport->msg_pending = true; /* synch usb call pending */ - INIT_COMPLETION(mos_parport->syncmsg_compl); + reinit_completion(&mos_parport->syncmsg_compl); spin_unlock(&release_lock); mutex_lock(&mos_parport->serial->disc_mutex); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index fdf953539c6..e5bdd987b9e 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1532,7 +1532,11 @@ static int mos7840_tiocmget(struct tty_struct *tty) return -ENODEV; status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr); + if (status != 1) + return -EIO; status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr); + if (status != 1) + return -EIO; result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 1cf6f125f5f..c3d94853b4a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -81,6 +81,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_VENDOR_ID 0x12D1 #define HUAWEI_PRODUCT_E173 0x140C +#define HUAWEI_PRODUCT_E1750 0x1406 #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_K4605 0x14C6 @@ -450,6 +451,10 @@ static void option_instat_callback(struct urb *urb); #define CHANGHONG_VENDOR_ID 0x2077 #define CHANGHONG_PRODUCT_CH690 0x7001 +/* Inovia */ +#define INOVIA_VENDOR_ID 0x20a6 +#define INOVIA_SEW858 0x1105 + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -567,6 +572,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1442, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), @@ -686,6 +693,222 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7B) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7C) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, @@ -1153,6 +1376,23 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff), /* ZTE MF91 */ .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1545, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1546, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1547, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1565, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1566, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1567, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1589, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1590, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1591, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1592, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1594, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1596, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1598, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1600, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, @@ -1254,7 +1494,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) }, - { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist + }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) }, @@ -1342,6 +1584,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ + { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index e7a84f0f517..1e6de4cd079 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -4,11 +4,6 @@ * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2003 IBM Corp. * - * Copyright (C) 2009, 2013 Frank Schäfer <fschaefer.oss@googlemail.com> - * - fixes, improvements and documentation for the baud rate encoding methods - * Copyright (C) 2013 Reinhard Max <max@suse.de> - * - fixes and improvements for the divisor based baud rate encoding method - * * Original driver for 2.2.x by anonymous * * This program is free software; you can redistribute it and/or @@ -134,17 +129,10 @@ MODULE_DEVICE_TABLE(usb, id_table); enum pl2303_type { - type_0, /* H version ? */ - type_1, /* H version ? */ - HX_TA, /* HX(A) / X(A) / TA version */ /* TODO: improve */ - HXD_EA_RA_SA, /* HXD / EA / RA / SA version */ /* TODO: improve */ - TB, /* TB version */ + type_0, /* don't know the difference between type 0 and */ + type_1, /* type 1, until someone from prolific tells us... */ + HX, /* HX version of the pl2303 chip */ }; -/* - * NOTE: don't know the difference between type 0 and type 1, - * until someone from Prolific tells us... - * TODO: distinguish between X/HX, TA and HXD, EA, RA, SA variants - */ struct pl2303_serial_private { enum pl2303_type type; @@ -184,7 +172,6 @@ static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; enum pl2303_type type = type_0; - char *type_str = "unknown (treating as type_0)"; unsigned char *buf; spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); @@ -197,38 +184,15 @@ static int pl2303_startup(struct usb_serial *serial) return -ENOMEM; } - if (serial->dev->descriptor.bDeviceClass == 0x02) { + if (serial->dev->descriptor.bDeviceClass == 0x02) type = type_0; - type_str = "type_0"; - } else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) { - /* - * NOTE: The bcdDevice version is the only difference between - * the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB - */ - if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) { - type = HX_TA; - type_str = "X/HX/TA"; - } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice) - == 0x400) { - type = HXD_EA_RA_SA; - type_str = "HXD/EA/RA/SA"; - } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice) - == 0x500) { - type = TB; - type_str = "TB"; - } else { - dev_info(&serial->interface->dev, - "unknown/unsupported device type\n"); - kfree(spriv); - kfree(buf); - return -ENODEV; - } - } else if (serial->dev->descriptor.bDeviceClass == 0x00 - || serial->dev->descriptor.bDeviceClass == 0xFF) { + else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) + type = HX; + else if (serial->dev->descriptor.bDeviceClass == 0x00) type = type_1; - type_str = "type_1"; - } - dev_dbg(&serial->interface->dev, "device type: %s\n", type_str); + else if (serial->dev->descriptor.bDeviceClass == 0xFF) + type = type_1; + dev_dbg(&serial->interface->dev, "device type: %d\n", type); spriv->type = type; usb_set_serial_data(serial, spriv); @@ -243,10 +207,10 @@ static int pl2303_startup(struct usb_serial *serial) pl2303_vendor_read(0x8383, 0, serial, buf); pl2303_vendor_write(0, 1, serial); pl2303_vendor_write(1, 0, serial); - if (type == type_0 || type == type_1) - pl2303_vendor_write(2, 0x24, serial); - else + if (type == HX) pl2303_vendor_write(2, 0x44, serial); + else + pl2303_vendor_write(2, 0x24, serial); kfree(buf); return 0; @@ -300,170 +264,65 @@ static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value) return retval; } -static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type, - u8 buf[4]) +static void pl2303_encode_baudrate(struct tty_struct *tty, + struct usb_serial_port *port, + u8 buf[4]) { - /* - * NOTE: Only the values defined in baud_sup are supported ! - * => if unsupported values are set, the PL2303 seems to - * use 9600 baud (at least my PL2303X always does) - */ const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600, - 4800, 7200, 9600, 14400, 19200, 28800, 38400, - 57600, 115200, 230400, 460800, 614400, 921600, - 1228800, 2457600, 3000000, 6000000, 12000000 }; + 4800, 7200, 9600, 14400, 19200, 28800, 38400, + 57600, 115200, 230400, 460800, 500000, 614400, + 921600, 1228800, 2457600, 3000000, 6000000 }; + + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + int baud; + int i; + /* - * NOTE: With the exception of type_0/1 devices, the following - * additional baud rates are supported (tested with HX rev. 3A only): - * 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800, - * 403200, 806400. (*: not HX) - * - * Maximum values: HXD, TB: 12000000; HX, TA: 6000000; - * type_0+1: 1228800; RA: 921600; SA: 115200 - * - * As long as we are not using this encoding method for anything else - * than the type_0+1 and HX chips, there is no point in complicating - * the code to support them. + * NOTE: Only the values defined in baud_sup are supported! + * => if unsupported values are set, the PL2303 seems to use + * 9600 baud (at least my PL2303X always does) */ - int i; + baud = tty_get_baud_rate(tty); + dev_dbg(&port->dev, "baud requested = %d\n", baud); + if (!baud) + return; /* Set baudrate to nearest supported value */ for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) { if (baud_sup[i] > baud) break; } + if (i == ARRAY_SIZE(baud_sup)) baud = baud_sup[i - 1]; else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1])) baud = baud_sup[i - 1]; else baud = baud_sup[i]; - /* Respect the chip type specific baud rate limits */ - /* - * FIXME: as long as we don't know how to distinguish between the - * HXD, EA, RA, and SA chip variants, allow the max. value of 12M. - */ - if (type == HX_TA) - baud = min_t(int, baud, 6000000); - else if (type == type_0 || type == type_1) - baud = min_t(int, baud, 1228800); - /* Direct (standard) baud rate encoding method */ - put_unaligned_le32(baud, buf); - return baud; -} - -static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type, - u8 buf[4]) -{ - /* - * Divisor based baud rate encoding method - * - * NOTE: it's not clear if the type_0/1 chips support this method - * - * divisor = 12MHz * 32 / baudrate = 2^A * B - * - * with - * - * A = buf[1] & 0x0e - * B = buf[0] + (buf[1] & 0x01) << 8 - * - * Special cases: - * => 8 < B < 16: device seems to work not properly - * => B <= 8: device uses the max. value B = 512 instead - */ - unsigned int A, B; + /* type_0, type_1 only support up to 1228800 baud */ + if (spriv->type != HX) + baud = min_t(int, baud, 1228800); - /* - * NOTE: The Windows driver allows maximum baud rates of 110% of the - * specified maximium value. - * Quick tests with early (2004) HX (rev. A) chips suggest, that even - * higher baud rates (up to the maximum of 24M baud !) are working fine, - * but that should really be tested carefully in "real life" scenarios - * before removing the upper limit completely. - * Baud rates smaller than the specified 75 baud are definitely working - * fine. - */ - if (type == type_0 || type == type_1) - baud = min_t(int, baud, 1228800 * 1.1); - else if (type == HX_TA) - baud = min_t(int, baud, 6000000 * 1.1); - else if (type == HXD_EA_RA_SA) - /* HXD, EA: 12Mbps; RA: 1Mbps; SA: 115200 bps */ - /* - * FIXME: as long as we don't know how to distinguish between - * these chip variants, allow the max. of these values - */ - baud = min_t(int, baud, 12000000 * 1.1); - else if (type == TB) - baud = min_t(int, baud, 12000000 * 1.1); - /* Determine factors A and B */ - A = 0; - B = 12000000 * 32 / baud; /* 12MHz */ - B <<= 1; /* Add one bit for rounding */ - while (B > (512 << 1) && A <= 14) { - A += 2; - B >>= 2; - } - if (A > 14) { /* max. divisor = min. baudrate reached */ - A = 14; - B = 512; - /* => ~45.78 baud */ + if (baud <= 115200) { + put_unaligned_le32(baud, buf); } else { - B = (B + 1) >> 1; /* Round the last bit */ - } - /* Handle special cases */ - if (B == 512) - B = 0; /* also: 1 to 8 */ - else if (B < 16) /* - * NOTE: With the current algorithm this happens - * only for A=0 and means that the min. divisor - * (respectively: the max. baudrate) is reached. + * Apparently the formula for higher speeds is: + * baudrate = 12M * 32 / (2^buf[1]) / buf[0] */ - B = 16; /* => 24 MBaud */ - /* Encode the baud rate */ - buf[3] = 0x80; /* Select divisor encoding method */ - buf[2] = 0; - buf[1] = (A & 0x0e); /* A */ - buf[1] |= ((B & 0x100) >> 8); /* MSB of B */ - buf[0] = B & 0xff; /* 8 LSBs of B */ - /* Calculate the actual/resulting baud rate */ - if (B <= 8) - B = 512; - baud = 12000000 * 32 / ((1 << A) * B); - - return baud; -} - -static void pl2303_encode_baudrate(struct tty_struct *tty, - struct usb_serial_port *port, - enum pl2303_type type, - u8 buf[4]) -{ - int baud; + unsigned tmp = 12000000 * 32 / baud; + buf[3] = 0x80; + buf[2] = 0; + buf[1] = (tmp >= 256); + while (tmp >= 256) { + tmp >>= 2; + buf[1] <<= 1; + } + buf[0] = tmp; + } - baud = tty_get_baud_rate(tty); - dev_dbg(&port->dev, "baud requested = %d\n", baud); - if (!baud) - return; - /* - * There are two methods for setting/encoding the baud rate - * 1) Direct method: encodes the baud rate value directly - * => supported by all chip types - * 2) Divisor based method: encodes a divisor to a base value (12MHz*32) - * => supported by HX chips (and likely not by type_0/1 chips) - * - * NOTE: Although the divisor based baud rate encoding method is much - * more flexible, some of the standard baud rate values can not be - * realized exactly. But the difference is very small (max. 0.2%) and - * the device likely uses the same baud rate generator for both methods - * so that there is likley no difference. - */ - if (type == type_0 || type == type_1) - baud = pl2303_baudrate_encode_direct(baud, type, buf); - else - baud = pl2303_baudrate_encode_divisor(baud, type, buf); /* Save resulting baud rate */ tty_encode_baud_rate(tty, baud, baud); dev_dbg(&port->dev, "baud set = %d\n", baud); @@ -520,8 +379,8 @@ static void pl2303_set_termios(struct tty_struct *tty, dev_dbg(&port->dev, "data bits = %d\n", buf[6]); } - /* For reference: buf[0]:buf[3] baud rate value */ - pl2303_encode_baudrate(tty, port, spriv->type, buf); + /* For reference buf[0]:buf[3] baud rate value */ + pl2303_encode_baudrate(tty, port, &buf[0]); /* For reference buf[4]=0 is 1 stop bits */ /* For reference buf[4]=1 is 1.5 stop bits */ @@ -598,10 +457,10 @@ static void pl2303_set_termios(struct tty_struct *tty, dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf); if (C_CRTSCTS(tty)) { - if (spriv->type == type_0 || spriv->type == type_1) - pl2303_vendor_write(0x0, 0x41, serial); - else + if (spriv->type == HX) pl2303_vendor_write(0x0, 0x61, serial); + else + pl2303_vendor_write(0x0, 0x41, serial); } else { pl2303_vendor_write(0x0, 0x0, serial); } @@ -638,7 +497,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; - if (spriv->type == type_0 || spriv->type == type_1) { + if (spriv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); } else { diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 760b78560f6..c9a35697ebe 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -190,6 +190,7 @@ static struct usb_device_id ti_id_table_combined[] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, { } /* terminator */ }; diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 94d75edef77..18509e6c21a 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -211,8 +211,11 @@ static int slave_configure(struct scsi_device *sdev) /* * Many devices do not respond properly to READ_CAPACITY_16. * Tell the SCSI layer to try READ_CAPACITY_10 first. + * However some USB 3.0 drive enclosures return capacity + * modulo 2TB. Those must use READ_CAPACITY_16 */ - sdev->try_rc_10_first = 1; + if (!(us->fflags & US_FL_NEEDS_CAP16)) + sdev->try_rc_10_first = 1; /* assume SPC3 or latter devices support sense size > 18 */ if (sdev->scsi_level > SCSI_SPC_2) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c015f2c1672..de32cfa5bfa 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1925,6 +1925,13 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Oliver Neukum <oneukum@suse.com> */ +UNUSUAL_DEV( 0x174c, 0x55aa, 0x0100, 0x0100, + "ASMedia", + "AS2105", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NEEDS_CAP16), + /* Reported by Jesse Feddema <jdfeddema@gmail.com> */ UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000, "Yarvik", diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c index 7f78f300f8f..f06ed82e63d 100644 --- a/drivers/usb/wusbcore/cbaf.c +++ b/drivers/usb/wusbcore/cbaf.c @@ -208,9 +208,9 @@ static int cbaf_check(struct cbaf *cbaf) ar_name = "ASSOCIATE"; ar_assoc = 1; break; - }; + } break; - }; + } dev_dbg(dev, "Association request #%02u: 0x%04x/%04x " "(%zu bytes): %s\n", @@ -623,6 +623,8 @@ static int cbaf_probe(struct usb_interface *iface, error_create_group: error_check: + usb_put_intf(iface); + usb_put_dev(cbaf->usb_dev); kfree(cbaf->buffer); error_kmalloc_buffer: kfree(cbaf); @@ -637,6 +639,7 @@ static void cbaf_disconnect(struct usb_interface *iface) sysfs_remove_group(&dev->kobj, &cbaf_dev_attr_group); usb_set_intfdata(iface, NULL); usb_put_intf(iface); + usb_put_dev(cbaf->usb_dev); kfree(cbaf->buffer); /* paranoia: clean up crypto keys */ kzfree(cbaf); diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 33a12788f9c..e538b72c4e3 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -973,7 +973,7 @@ int wusb_usb_ncb(struct notifier_block *nb, unsigned long val, default: WARN_ON(1); result = NOTIFY_BAD; - }; + } return result; } diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c index a09b65ebd9b..368360f9a93 100644 --- a/drivers/usb/wusbcore/wa-hc.c +++ b/drivers/usb/wusbcore/wa-hc.c @@ -33,7 +33,8 @@ * wa->usb_dev and wa->usb_iface initialized and refcounted, * wa->wa_descr initialized. */ -int wa_create(struct wahc *wa, struct usb_interface *iface) +int wa_create(struct wahc *wa, struct usb_interface *iface, + kernel_ulong_t quirks) { int result; struct device *dev = &iface->dev; @@ -41,14 +42,15 @@ int wa_create(struct wahc *wa, struct usb_interface *iface) result = wa_rpipes_create(wa); if (result < 0) goto error_rpipes_create; + wa->quirks = quirks; /* Fill up Data Transfer EP pointers */ wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc; wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc; - wa->xfer_result_size = usb_endpoint_maxp(wa->dti_epd); - wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL); - if (wa->xfer_result == NULL) { + wa->dti_buf_size = usb_endpoint_maxp(wa->dti_epd); + wa->dti_buf = kmalloc(wa->dti_buf_size, GFP_KERNEL); + if (wa->dti_buf == NULL) { result = -ENOMEM; - goto error_xfer_result_alloc; + goto error_dti_buf_alloc; } result = wa_nep_create(wa, iface); if (result < 0) { @@ -59,8 +61,8 @@ int wa_create(struct wahc *wa, struct usb_interface *iface) return 0; error_nep_create: - kfree(wa->xfer_result); -error_xfer_result_alloc: + kfree(wa->dti_buf); +error_dti_buf_alloc: wa_rpipes_destroy(wa); error_rpipes_create: return result; @@ -76,7 +78,7 @@ void __wa_destroy(struct wahc *wa) usb_kill_urb(wa->buf_in_urb); usb_put_urb(wa->buf_in_urb); } - kfree(wa->xfer_result); + kfree(wa->dti_buf); wa_nep_destroy(wa); wa_rpipes_destroy(wa); } diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h index cf250c21e94..e614f02f0cf 100644 --- a/drivers/usb/wusbcore/wa-hc.h +++ b/drivers/usb/wusbcore/wa-hc.h @@ -117,11 +117,25 @@ struct wa_rpipe { struct wahc *wa; spinlock_t seg_lock; struct list_head seg_list; + struct list_head list_node; atomic_t segs_available; u8 buffer[1]; /* For reads/writes on USB */ }; +enum wa_dti_state { + WA_DTI_TRANSFER_RESULT_PENDING, + WA_DTI_ISOC_PACKET_STATUS_PENDING +}; + +enum wa_quirks { + /* + * The Alereon HWA expects the data frames in isochronous transfer + * requests to be concatenated and not sent as separate packets. + */ + WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC = 0x01, +}; + /** * Instance of a HWA Host Controller * @@ -178,14 +192,26 @@ struct wahc { u16 rpipes; unsigned long *rpipe_bm; /* rpipe usage bitmap */ - spinlock_t rpipe_bm_lock; /* protect rpipe_bm */ + struct list_head rpipe_delayed_list; /* delayed RPIPES. */ + spinlock_t rpipe_lock; /* protect rpipe_bm and delayed list */ struct mutex rpipe_mutex; /* assigning resources to endpoints */ + /* + * dti_state is used to track the state of the dti_urb. When dti_state + * is WA_DTI_ISOC_PACKET_STATUS_PENDING, dti_isoc_xfer_in_progress and + * dti_isoc_xfer_seg identify which xfer the incoming isoc packet status + * refers to. + */ + enum wa_dti_state dti_state; + u32 dti_isoc_xfer_in_progress; + u8 dti_isoc_xfer_seg; struct urb *dti_urb; /* URB for reading xfer results */ struct urb *buf_in_urb; /* URB for reading data in */ struct edc dti_edc; /* DTI error density counter */ - struct wa_xfer_result *xfer_result; /* real size = dti_ep maxpktsize */ - size_t xfer_result_size; + void *dti_buf; + size_t dti_buf_size; + + unsigned long dto_in_use; /* protect dto endoint serialization. */ s32 status; /* For reading status */ @@ -200,10 +226,13 @@ struct wahc { struct work_struct xfer_enqueue_work; struct work_struct xfer_error_work; atomic_t xfer_id_count; + + kernel_ulong_t quirks; }; -extern int wa_create(struct wahc *wa, struct usb_interface *iface); +extern int wa_create(struct wahc *wa, struct usb_interface *iface, + kernel_ulong_t); extern void __wa_destroy(struct wahc *wa); void wa_reset_all(struct wahc *wa); @@ -239,7 +268,8 @@ static inline void wa_nep_disarm(struct wahc *wa) /* RPipes */ static inline void wa_rpipe_init(struct wahc *wa) { - spin_lock_init(&wa->rpipe_bm_lock); + INIT_LIST_HEAD(&wa->rpipe_delayed_list); + spin_lock_init(&wa->rpipe_lock); mutex_init(&wa->rpipe_mutex); } @@ -247,6 +277,7 @@ static inline void wa_init(struct wahc *wa) { edc_init(&wa->nep_edc); atomic_set(&wa->notifs_queued, 0); + wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; wa_rpipe_init(wa); edc_init(&wa->dti_edc); INIT_LIST_HEAD(&wa->xfer_list); @@ -255,6 +286,7 @@ static inline void wa_init(struct wahc *wa) spin_lock_init(&wa->xfer_list_lock); INIT_WORK(&wa->xfer_enqueue_work, wa_urb_enqueue_run); INIT_WORK(&wa->xfer_error_work, wa_process_errored_transfers_run); + wa->dto_in_use = 0; atomic_set(&wa->xfer_id_count, 1); } diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c index fd4f1ce6256..b48e74cc54d 100644 --- a/drivers/usb/wusbcore/wa-rpipe.c +++ b/drivers/usb/wusbcore/wa-rpipe.c @@ -143,17 +143,18 @@ static void rpipe_init(struct wa_rpipe *rpipe) kref_init(&rpipe->refcnt); spin_lock_init(&rpipe->seg_lock); INIT_LIST_HEAD(&rpipe->seg_list); + INIT_LIST_HEAD(&rpipe->list_node); } static unsigned rpipe_get_idx(struct wahc *wa, unsigned rpipe_idx) { unsigned long flags; - spin_lock_irqsave(&wa->rpipe_bm_lock, flags); + spin_lock_irqsave(&wa->rpipe_lock, flags); rpipe_idx = find_next_zero_bit(wa->rpipe_bm, wa->rpipes, rpipe_idx); if (rpipe_idx < wa->rpipes) set_bit(rpipe_idx, wa->rpipe_bm); - spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags); + spin_unlock_irqrestore(&wa->rpipe_lock, flags); return rpipe_idx; } @@ -162,9 +163,9 @@ static void rpipe_put_idx(struct wahc *wa, unsigned rpipe_idx) { unsigned long flags; - spin_lock_irqsave(&wa->rpipe_bm_lock, flags); + spin_lock_irqsave(&wa->rpipe_lock, flags); clear_bit(rpipe_idx, wa->rpipe_bm); - spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags); + spin_unlock_irqrestore(&wa->rpipe_lock, flags); } void rpipe_destroy(struct kref *_rpipe) @@ -333,7 +334,10 @@ static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa, /* FIXME: compute so seg_size > ep->maxpktsize */ rpipe->descr.wBlocks = cpu_to_le16(16); /* given */ /* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */ - rpipe->descr.wMaxPacketSize = cpu_to_le16(ep->desc.wMaxPacketSize); + if (usb_endpoint_xfer_isoc(&ep->desc)) + rpipe->descr.wMaxPacketSize = epcd->wOverTheAirPacketSize; + else + rpipe->descr.wMaxPacketSize = ep->desc.wMaxPacketSize; rpipe->descr.hwa_bMaxBurst = max(min_t(unsigned int, epcd->bMaxBurst, 16U), 1U); @@ -361,8 +365,10 @@ static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa, epcd->bMaxSequence, 32U), 2U); rpipe->descr.bMaxDataSequence = epcd_max_sequence - 1; rpipe->descr.bInterval = ep->desc.bInterval; - /* FIXME: bOverTheAirInterval */ - rpipe->descr.bOverTheAirInterval = 0; /* 0 if not isoc */ + if (usb_endpoint_xfer_isoc(&ep->desc)) + rpipe->descr.bOverTheAirInterval = epcd->bOverTheAirInterval; + else + rpipe->descr.bOverTheAirInterval = 0; /* 0 if not isoc */ /* FIXME: xmit power & preamble blah blah */ rpipe->descr.bmAttribute = (ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); @@ -477,7 +483,7 @@ error: */ int wa_rpipes_create(struct wahc *wa) { - wa->rpipes = wa->wa_descr->wNumRPipes; + wa->rpipes = le16_to_cpu(wa->wa_descr->wNumRPipes); wa->rpipe_bm = kzalloc(BITS_TO_LONGS(wa->rpipes)*sizeof(unsigned long), GFP_KERNEL); if (wa->rpipe_bm == NULL) diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 6ad02f57c36..ed5abe87b04 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -91,7 +91,8 @@ #include "wusbhc.h" enum { - WA_SEGS_MAX = 255, + /* [WUSB] section 8.3.3 allocates 7 bits for the segment index. */ + WA_SEGS_MAX = 128, }; enum wa_seg_status { @@ -107,6 +108,7 @@ enum wa_seg_status { }; static void wa_xfer_delayed_run(struct wa_rpipe *); +static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting); /* * Life cycle governed by 'struct urb' (the refcount of the struct is @@ -114,24 +116,27 @@ static void wa_xfer_delayed_run(struct wa_rpipe *); * struct). */ struct wa_seg { - struct urb urb; - struct urb *dto_urb; /* for data output? */ + struct urb tr_urb; /* transfer request urb. */ + struct urb *isoc_pack_desc_urb; /* for isoc packet descriptor. */ + struct urb *dto_urb; /* for data output. */ struct list_head list_node; /* for rpipe->req_list */ struct wa_xfer *xfer; /* out xfer */ u8 index; /* which segment we are */ + int isoc_frame_count; /* number of isoc frames in this segment. */ + int isoc_frame_offset; /* starting frame offset in the xfer URB. */ + int isoc_size; /* size of all isoc frames sent by this seg. */ enum wa_seg_status status; ssize_t result; /* bytes xfered or error */ struct wa_xfer_hdr xfer_hdr; - u8 xfer_extra[]; /* xtra space for xfer_hdr_ctl */ }; static inline void wa_seg_init(struct wa_seg *seg) { - usb_init_urb(&seg->urb); + usb_init_urb(&seg->tr_urb); /* set the remaining memory to 0. */ - memset(((void *)seg) + sizeof(seg->urb), 0, - sizeof(*seg) - sizeof(seg->urb)); + memset(((void *)seg) + sizeof(seg->tr_urb), 0, + sizeof(*seg) - sizeof(seg->tr_urb)); } /* @@ -153,12 +158,17 @@ struct wa_xfer { unsigned is_dma:1; size_t seg_size; int result; + /* Isoc frame that the current transfer buffer corresponds to. */ + int dto_isoc_frame_index; gfp_t gfp; /* allocation mask */ struct wusb_dev *wusb_dev; /* for activity timestamps */ }; +static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer, + struct wa_seg *seg, int curr_iso_frame); + static inline void wa_xfer_init(struct wa_xfer *xfer) { kref_init(&xfer->refcnt); @@ -169,7 +179,7 @@ static inline void wa_xfer_init(struct wa_xfer *xfer) /* * Destroy a transfer structure * - * Note that freeing xfer->seg[cnt]->urb will free the containing + * Note that freeing xfer->seg[cnt]->tr_urb will free the containing * xfer->seg[cnt] memory that was allocated by __wa_xfer_setup_segs. */ static void wa_xfer_destroy(struct kref *_xfer) @@ -178,9 +188,17 @@ static void wa_xfer_destroy(struct kref *_xfer) if (xfer->seg) { unsigned cnt; for (cnt = 0; cnt < xfer->segs; cnt++) { - usb_free_urb(xfer->seg[cnt]->dto_urb); - usb_free_urb(&xfer->seg[cnt]->urb); + struct wa_seg *seg = xfer->seg[cnt]; + if (seg) { + usb_free_urb(seg->isoc_pack_desc_urb); + if (seg->dto_urb) { + kfree(seg->dto_urb->sg); + usb_free_urb(seg->dto_urb); + } + usb_free_urb(&seg->tr_urb); + } } + kfree(xfer->seg); } kfree(xfer); } @@ -196,6 +214,59 @@ static void wa_xfer_put(struct wa_xfer *xfer) } /* + * Try to get exclusive access to the DTO endpoint resource. Return true + * if successful. + */ +static inline int __wa_dto_try_get(struct wahc *wa) +{ + return (test_and_set_bit(0, &wa->dto_in_use) == 0); +} + +/* Release the DTO endpoint resource. */ +static inline void __wa_dto_put(struct wahc *wa) +{ + clear_bit_unlock(0, &wa->dto_in_use); +} + +/* Service RPIPEs that are waiting on the DTO resource. */ +static void wa_check_for_delayed_rpipes(struct wahc *wa) +{ + unsigned long flags; + int dto_waiting = 0; + struct wa_rpipe *rpipe; + + spin_lock_irqsave(&wa->rpipe_lock, flags); + while (!list_empty(&wa->rpipe_delayed_list) && !dto_waiting) { + rpipe = list_first_entry(&wa->rpipe_delayed_list, + struct wa_rpipe, list_node); + __wa_xfer_delayed_run(rpipe, &dto_waiting); + /* remove this RPIPE from the list if it is not waiting. */ + if (!dto_waiting) { + pr_debug("%s: RPIPE %d serviced and removed from delayed list.\n", + __func__, + le16_to_cpu(rpipe->descr.wRPipeIndex)); + list_del_init(&rpipe->list_node); + } + } + spin_unlock_irqrestore(&wa->rpipe_lock, flags); +} + +/* add this RPIPE to the end of the delayed RPIPE list. */ +static void wa_add_delayed_rpipe(struct wahc *wa, struct wa_rpipe *rpipe) +{ + unsigned long flags; + + spin_lock_irqsave(&wa->rpipe_lock, flags); + /* add rpipe to the list if it is not already on it. */ + if (list_empty(&rpipe->list_node)) { + pr_debug("%s: adding RPIPE %d to the delayed list.\n", + __func__, le16_to_cpu(rpipe->descr.wRPipeIndex)); + list_add_tail(&rpipe->list_node, &wa->rpipe_delayed_list); + } + spin_unlock_irqrestore(&wa->rpipe_lock, flags); +} + +/* * xfer is referenced * * xfer->lock has to be unlocked @@ -232,6 +303,31 @@ static void wa_xfer_completion(struct wa_xfer *xfer) } /* + * Initialize a transfer's ID + * + * We need to use a sequential number; if we use the pointer or the + * hash of the pointer, it can repeat over sequential transfers and + * then it will confuse the HWA....wonder why in hell they put a 32 + * bit handle in there then. + */ +static void wa_xfer_id_init(struct wa_xfer *xfer) +{ + xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count); +} + +/* Return the xfer's ID. */ +static inline u32 wa_xfer_id(struct wa_xfer *xfer) +{ + return xfer->id; +} + +/* Return the xfer's ID in transport format (little endian). */ +static inline __le32 wa_xfer_id_le32(struct wa_xfer *xfer) +{ + return cpu_to_le32(xfer->id); +} + +/* * If transfer is done, wrap it up and return true * * xfer->lock has to be locked @@ -253,33 +349,37 @@ static unsigned __wa_xfer_is_done(struct wa_xfer *xfer) switch (seg->status) { case WA_SEG_DONE: if (found_short && seg->result > 0) { - dev_dbg(dev, "xfer %p#%u: bad short segments (%zu)\n", - xfer, cnt, seg->result); + dev_dbg(dev, "xfer %p ID %08X#%u: bad short segments (%zu)\n", + xfer, wa_xfer_id(xfer), cnt, + seg->result); urb->status = -EINVAL; goto out; } urb->actual_length += seg->result; - if (seg->result < xfer->seg_size + if (!(usb_pipeisoc(xfer->urb->pipe)) + && seg->result < xfer->seg_size && cnt != xfer->segs-1) found_short = 1; - dev_dbg(dev, "xfer %p#%u: DONE short %d " + dev_dbg(dev, "xfer %p ID %08X#%u: DONE short %d " "result %zu urb->actual_length %d\n", - xfer, seg->index, found_short, seg->result, - urb->actual_length); + xfer, wa_xfer_id(xfer), seg->index, found_short, + seg->result, urb->actual_length); break; case WA_SEG_ERROR: xfer->result = seg->result; - dev_dbg(dev, "xfer %p#%u: ERROR result %zu\n", - xfer, seg->index, seg->result); + dev_dbg(dev, "xfer %p ID %08X#%u: ERROR result %zu(0x%08zX)\n", + xfer, wa_xfer_id(xfer), seg->index, seg->result, + seg->result); goto out; case WA_SEG_ABORTED: - dev_dbg(dev, "xfer %p#%u ABORTED: result %d\n", - xfer, seg->index, urb->status); + dev_dbg(dev, "xfer %p ID %08X#%u ABORTED: result %d\n", + xfer, wa_xfer_id(xfer), seg->index, + urb->status); xfer->result = urb->status; goto out; default: - dev_warn(dev, "xfer %p#%u: is_done bad state %d\n", - xfer, cnt, seg->status); + dev_warn(dev, "xfer %p ID %08X#%u: is_done bad state %d\n", + xfer, wa_xfer_id(xfer), cnt, seg->status); xfer->result = -EINVAL; goto out; } @@ -290,29 +390,6 @@ out: } /* - * Initialize a transfer's ID - * - * We need to use a sequential number; if we use the pointer or the - * hash of the pointer, it can repeat over sequential transfers and - * then it will confuse the HWA....wonder why in hell they put a 32 - * bit handle in there then. - */ -static void wa_xfer_id_init(struct wa_xfer *xfer) -{ - xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count); -} - -/* - * Return the xfer's ID associated with xfer - * - * Need to generate a - */ -static u32 wa_xfer_id(struct wa_xfer *xfer) -{ - return xfer->id; -} - -/* * Search for a transfer list ID on the HCD's URB list * * For 32 bit architectures, we use the pointer itself; for 64 bits, a @@ -356,15 +433,11 @@ static void __wa_xfer_abort_cb(struct urb *urb) * * The callback (see above) does nothing but freeing up the data by * putting the URB. Because the URB is allocated at the head of the - * struct, the whole space we allocated is kfreed. - * - * We'll get an 'aborted transaction' xfer result on DTI, that'll - * politely ignore because at this point the transaction has been - * marked as aborted already. + * struct, the whole space we allocated is kfreed. * */ -static void __wa_xfer_abort(struct wa_xfer *xfer) +static int __wa_xfer_abort(struct wa_xfer *xfer) { - int result; + int result = -ENOMEM; struct device *dev = &xfer->wa->usb_iface->dev; struct wa_xfer_abort_buffer *b; struct wa_rpipe *rpipe = xfer->ep->hcpriv; @@ -375,7 +448,7 @@ static void __wa_xfer_abort(struct wa_xfer *xfer) b->cmd.bLength = sizeof(b->cmd); b->cmd.bRequestType = WA_XFER_ABORT; b->cmd.wRPipe = rpipe->descr.wRPipeIndex; - b->cmd.dwTransferID = wa_xfer_id(xfer); + b->cmd.dwTransferID = wa_xfer_id_le32(xfer); usb_init_urb(&b->urb); usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev, @@ -385,7 +458,7 @@ static void __wa_xfer_abort(struct wa_xfer *xfer) result = usb_submit_urb(&b->urb, GFP_ATOMIC); if (result < 0) goto error_submit; - return; /* callback frees! */ + return result; /* callback frees! */ error_submit: @@ -394,11 +467,52 @@ error_submit: xfer, result); kfree(b); error_kmalloc: - return; + return result; } /* + * Calculate the number of isoc frames starting from isoc_frame_offset + * that will fit a in transfer segment. + */ +static int __wa_seg_calculate_isoc_frame_count(struct wa_xfer *xfer, + int isoc_frame_offset, int *total_size) +{ + int segment_size = 0, frame_count = 0; + int index = isoc_frame_offset; + struct usb_iso_packet_descriptor *iso_frame_desc = + xfer->urb->iso_frame_desc; + + while ((index < xfer->urb->number_of_packets) + && ((segment_size + iso_frame_desc[index].length) + <= xfer->seg_size)) { + /* + * For Alereon HWA devices, only include an isoc frame in a + * segment if it is physically contiguous with the previous + * frame. This is required because those devices expect + * the isoc frames to be sent as a single USB transaction as + * opposed to one transaction per frame with standard HWA. + */ + if ((xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) + && (index > isoc_frame_offset) + && ((iso_frame_desc[index - 1].offset + + iso_frame_desc[index - 1].length) != + iso_frame_desc[index].offset)) + break; + + /* this frame fits. count it. */ + ++frame_count; + segment_size += iso_frame_desc[index].length; + + /* move to the next isoc frame. */ + ++index; + } + + *total_size = segment_size; + return frame_count; +} + +/* * * @returns < 0 on error, transfer segment request size if ok */ @@ -422,43 +536,92 @@ static ssize_t __wa_xfer_setup_sizes(struct wa_xfer *xfer, result = sizeof(struct wa_xfer_bi); break; case USB_ENDPOINT_XFER_ISOC: - dev_err(dev, "FIXME: ISOC not implemented\n"); - result = -ENOSYS; - goto error; + if (usb_pipeout(urb->pipe)) { + *pxfer_type = WA_XFER_TYPE_ISO; + result = sizeof(struct wa_xfer_hwaiso); + } else { + dev_err(dev, "FIXME: ISOC IN not implemented\n"); + result = -ENOSYS; + goto error; + } + break; default: /* never happens */ BUG(); result = -EINVAL; /* shut gcc up */ - }; + } xfer->is_inbound = urb->pipe & USB_DIR_IN ? 1 : 0; xfer->is_dma = urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? 1 : 0; - xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks) - * 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1); - /* Compute the segment size and make sure it is a multiple of - * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of - * a check (FIXME) */ + maxpktsize = le16_to_cpu(rpipe->descr.wMaxPacketSize); - if (xfer->seg_size < maxpktsize) { - dev_err(dev, "HW BUG? seg_size %zu smaller than maxpktsize " - "%zu\n", xfer->seg_size, maxpktsize); - result = -EINVAL; - goto error; + if ((rpipe->descr.bmAttribute & 0x3) == USB_ENDPOINT_XFER_ISOC) { + int index = 0; + + xfer->seg_size = maxpktsize; + xfer->segs = 0; + /* + * loop over urb->number_of_packets to determine how many + * xfer segments will be needed to send the isoc frames. + */ + while (index < urb->number_of_packets) { + int seg_size; /* don't care. */ + index += __wa_seg_calculate_isoc_frame_count(xfer, + index, &seg_size); + ++xfer->segs; + } + } else { + xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks) + * 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1); + /* Compute the segment size and make sure it is a multiple of + * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of + * a check (FIXME) */ + if (xfer->seg_size < maxpktsize) { + dev_err(dev, + "HW BUG? seg_size %zu smaller than maxpktsize %zu\n", + xfer->seg_size, maxpktsize); + result = -EINVAL; + goto error; + } + xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize; + xfer->segs = DIV_ROUND_UP(urb->transfer_buffer_length, + xfer->seg_size); + if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL) + xfer->segs = 1; } - xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize; - xfer->segs = DIV_ROUND_UP(urb->transfer_buffer_length, xfer->seg_size); - if (xfer->segs >= WA_SEGS_MAX) { - dev_err(dev, "BUG? ops, number of segments %d bigger than %d\n", - (int)(urb->transfer_buffer_length / xfer->seg_size), + + if (xfer->segs > WA_SEGS_MAX) { + dev_err(dev, "BUG? oops, number of segments %zu bigger than %d\n", + (urb->transfer_buffer_length/xfer->seg_size), WA_SEGS_MAX); result = -EINVAL; goto error; } - if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL) - xfer->segs = 1; error: return result; } +static void __wa_setup_isoc_packet_descr( + struct wa_xfer_packet_info_hwaiso *packet_desc, + struct wa_xfer *xfer, + struct wa_seg *seg) { + struct usb_iso_packet_descriptor *iso_frame_desc = + xfer->urb->iso_frame_desc; + int frame_index; + + /* populate isoc packet descriptor. */ + packet_desc->bPacketType = WA_XFER_ISO_PACKET_INFO; + packet_desc->wLength = cpu_to_le16(sizeof(*packet_desc) + + (sizeof(packet_desc->PacketLength[0]) * + seg->isoc_frame_count)); + for (frame_index = 0; frame_index < seg->isoc_frame_count; + ++frame_index) { + int offset_index = frame_index + seg->isoc_frame_offset; + packet_desc->PacketLength[frame_index] = + cpu_to_le16(iso_frame_desc[offset_index].length); + } +} + + /* Fill in the common request header and xfer-type specific data. */ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, struct wa_xfer_hdr *xfer_hdr0, @@ -466,12 +629,13 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, size_t xfer_hdr_size) { struct wa_rpipe *rpipe = xfer->ep->hcpriv; + struct wa_seg *seg = xfer->seg[0]; - xfer_hdr0 = &xfer->seg[0]->xfer_hdr; + xfer_hdr0 = &seg->xfer_hdr; xfer_hdr0->bLength = xfer_hdr_size; xfer_hdr0->bRequestType = xfer_type; xfer_hdr0->wRPipe = rpipe->descr.wRPipeIndex; - xfer_hdr0->dwTransferID = wa_xfer_id(xfer); + xfer_hdr0->dwTransferID = wa_xfer_id_le32(xfer); xfer_hdr0->bTransferSegment = 0; switch (xfer_type) { case WA_XFER_TYPE_CTL: { @@ -484,8 +648,18 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, } case WA_XFER_TYPE_BI: break; - case WA_XFER_TYPE_ISO: - printk(KERN_ERR "FIXME: ISOC not implemented\n"); + case WA_XFER_TYPE_ISO: { + struct wa_xfer_hwaiso *xfer_iso = + container_of(xfer_hdr0, struct wa_xfer_hwaiso, hdr); + struct wa_xfer_packet_info_hwaiso *packet_desc = + ((void *)xfer_iso) + xfer_hdr_size; + + /* populate the isoc section of the transfer request. */ + xfer_iso->dwNumOfPackets = cpu_to_le32(seg->isoc_frame_count); + /* populate isoc packet descriptor. */ + __wa_setup_isoc_packet_descr(packet_desc, xfer, seg); + break; + } default: BUG(); }; @@ -494,12 +668,12 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, /* * Callback for the OUT data phase of the segment request * - * Check wa_seg_cb(); most comments also apply here because this + * Check wa_seg_tr_cb(); most comments also apply here because this * function does almost the same thing and they work closely * together. * * If the seg request has failed but this DTO phase has succeeded, - * wa_seg_cb() has already failed the segment and moved the + * wa_seg_tr_cb() has already failed the segment and moved the * status to WA_SEG_ERROR, so this will go through 'case 0' and * effectively do nothing. */ @@ -512,6 +686,139 @@ static void wa_seg_dto_cb(struct urb *urb) struct wa_rpipe *rpipe; unsigned long flags; unsigned rpipe_ready = 0; + int data_send_done = 1, release_dto = 0, holding_dto = 0; + u8 done = 0; + int result; + + /* free the sg if it was used. */ + kfree(urb->sg); + urb->sg = NULL; + + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + if (usb_pipeisoc(xfer->urb->pipe)) { + /* Alereon HWA sends all isoc frames in a single transfer. */ + if (wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) + xfer->dto_isoc_frame_index += seg->isoc_frame_count; + else + xfer->dto_isoc_frame_index += 1; + if (xfer->dto_isoc_frame_index < seg->isoc_frame_count) { + data_send_done = 0; + holding_dto = 1; /* checked in error cases. */ + /* + * if this is the last isoc frame of the segment, we + * can release DTO after sending this frame. + */ + if ((xfer->dto_isoc_frame_index + 1) >= + seg->isoc_frame_count) + release_dto = 1; + } + dev_dbg(dev, "xfer 0x%08X#%u: isoc frame = %d, holding_dto = %d, release_dto = %d.\n", + wa_xfer_id(xfer), seg->index, + xfer->dto_isoc_frame_index, holding_dto, release_dto); + } + spin_unlock_irqrestore(&xfer->lock, flags); + + switch (urb->status) { + case 0: + spin_lock_irqsave(&xfer->lock, flags); + seg->result += urb->actual_length; + if (data_send_done) { + dev_dbg(dev, "xfer 0x%08X#%u: data out done (%zu bytes)\n", + wa_xfer_id(xfer), seg->index, seg->result); + if (seg->status < WA_SEG_PENDING) + seg->status = WA_SEG_PENDING; + } else { + /* should only hit this for isoc xfers. */ + /* + * Populate the dto URB with the next isoc frame buffer, + * send the URB and release DTO if we no longer need it. + */ + __wa_populate_dto_urb_isoc(xfer, seg, + seg->isoc_frame_offset + + xfer->dto_isoc_frame_index); + + /* resubmit the URB with the next isoc frame. */ + result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "xfer 0x%08X#%u: DTO submit failed: %d\n", + wa_xfer_id(xfer), seg->index, result); + spin_unlock_irqrestore(&xfer->lock, flags); + goto error_dto_submit; + } + } + spin_unlock_irqrestore(&xfer->lock, flags); + if (release_dto) { + __wa_dto_put(wa); + wa_check_for_delayed_rpipes(wa); + } + break; + case -ECONNRESET: /* URB unlinked; no need to do anything */ + case -ENOENT: /* as it was done by the who unlinked us */ + if (holding_dto) { + __wa_dto_put(wa); + wa_check_for_delayed_rpipes(wa); + } + break; + default: /* Other errors ... */ + dev_err(dev, "xfer 0x%08X#%u: data out error %d\n", + wa_xfer_id(xfer), seg->index, urb->status); + goto error_default; + } + + return; + +error_dto_submit: +error_default: + spin_lock_irqsave(&xfer->lock, flags); + rpipe = xfer->ep->hcpriv; + if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)){ + dev_err(dev, "DTO: URB max acceptable errors exceeded, resetting device\n"); + wa_reset_all(wa); + } + if (seg->status != WA_SEG_ERROR) { + seg->status = WA_SEG_ERROR; + seg->result = urb->status; + xfer->segs_done++; + __wa_xfer_abort(xfer); + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + } + spin_unlock_irqrestore(&xfer->lock, flags); + if (holding_dto) { + __wa_dto_put(wa); + wa_check_for_delayed_rpipes(wa); + } + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + +} + +/* + * Callback for the isoc packet descriptor phase of the segment request + * + * Check wa_seg_tr_cb(); most comments also apply here because this + * function does almost the same thing and they work closely + * together. + * + * If the seg request has failed but this phase has succeeded, + * wa_seg_tr_cb() has already failed the segment and moved the + * status to WA_SEG_ERROR, so this will go through 'case 0' and + * effectively do nothing. + */ +static void wa_seg_iso_pack_desc_cb(struct urb *urb) +{ + struct wa_seg *seg = urb->context; + struct wa_xfer *xfer = seg->xfer; + struct wahc *wa; + struct device *dev; + struct wa_rpipe *rpipe; + unsigned long flags; + unsigned rpipe_ready = 0; u8 done = 0; switch (urb->status) { @@ -519,11 +826,10 @@ static void wa_seg_dto_cb(struct urb *urb) spin_lock_irqsave(&xfer->lock, flags); wa = xfer->wa; dev = &wa->usb_iface->dev; - dev_dbg(dev, "xfer %p#%u: data out done (%d bytes)\n", - xfer, seg->index, urb->actual_length); - if (seg->status < WA_SEG_PENDING) + dev_dbg(dev, "iso xfer %08X#%u: packet descriptor done\n", + wa_xfer_id(xfer), seg->index); + if (xfer->is_inbound && seg->status < WA_SEG_PENDING) seg->status = WA_SEG_PENDING; - seg->result = urb->actual_length; spin_unlock_irqrestore(&xfer->lock, flags); break; case -ECONNRESET: /* URB unlinked; no need to do anything */ @@ -534,15 +840,15 @@ static void wa_seg_dto_cb(struct urb *urb) wa = xfer->wa; dev = &wa->usb_iface->dev; rpipe = xfer->ep->hcpriv; - dev_dbg(dev, "xfer %p#%u: data out error %d\n", - xfer, seg->index, urb->status); + pr_err_ratelimited("iso xfer %08X#%u: packet descriptor error %d\n", + wa_xfer_id(xfer), seg->index, urb->status); if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)){ - dev_err(dev, "DTO: URB max acceptable errors " - "exceeded, resetting device\n"); + dev_err(dev, "DTO: URB max acceptable errors exceeded, resetting device\n"); wa_reset_all(wa); } if (seg->status != WA_SEG_ERROR) { + usb_unlink_urb(seg->dto_urb); seg->status = WA_SEG_ERROR; seg->result = urb->status; xfer->segs_done++; @@ -572,11 +878,11 @@ static void wa_seg_dto_cb(struct urb *urb) * We have to check before setting the status to WA_SEG_PENDING * because sometimes the xfer result callback arrives before this * callback (geeeeeeze), so it might happen that we are already in - * another state. As well, we don't set it if the transfer is inbound, + * another state. As well, we don't set it if the transfer is not inbound, * as in that case, wa_seg_dto_cb will do it when the OUT data phase * finishes. */ -static void wa_seg_cb(struct urb *urb) +static void wa_seg_tr_cb(struct urb *urb) { struct wa_seg *seg = urb->context; struct wa_xfer *xfer = seg->xfer; @@ -592,8 +898,11 @@ static void wa_seg_cb(struct urb *urb) spin_lock_irqsave(&xfer->lock, flags); wa = xfer->wa; dev = &wa->usb_iface->dev; - dev_dbg(dev, "xfer %p#%u: request done\n", xfer, seg->index); - if (xfer->is_inbound && seg->status < WA_SEG_PENDING) + dev_dbg(dev, "xfer %p ID 0x%08X#%u: request done\n", + xfer, wa_xfer_id(xfer), seg->index); + if (xfer->is_inbound && + seg->status < WA_SEG_PENDING && + !(usb_pipeisoc(xfer->urb->pipe))) seg->status = WA_SEG_PENDING; spin_unlock_irqrestore(&xfer->lock, flags); break; @@ -606,14 +915,16 @@ static void wa_seg_cb(struct urb *urb) dev = &wa->usb_iface->dev; rpipe = xfer->ep->hcpriv; if (printk_ratelimit()) - dev_err(dev, "xfer %p#%u: request error %d\n", - xfer, seg->index, urb->status); + dev_err(dev, "xfer %p ID 0x%08X#%u: request error %d\n", + xfer, wa_xfer_id(xfer), seg->index, + urb->status); if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)){ dev_err(dev, "DTO: URB max acceptable errors " "exceeded, resetting device\n"); wa_reset_all(wa); } + usb_unlink_urb(seg->isoc_pack_desc_urb); usb_unlink_urb(seg->dto_urb); seg->status = WA_SEG_ERROR; seg->result = urb->status; @@ -629,9 +940,11 @@ static void wa_seg_cb(struct urb *urb) } } -/* allocate an SG list to store bytes_to_transfer bytes and copy the +/* + * Allocate an SG list to store bytes_to_transfer bytes and copy the * subset of the in_sg that matches the buffer subset - * we are about to transfer. */ + * we are about to transfer. + */ static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg, const unsigned int bytes_transferred, const unsigned int bytes_to_transfer, unsigned int *out_num_sgs) @@ -710,6 +1023,75 @@ static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg, } /* + * Populate DMA buffer info for the isoc dto urb. + */ +static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer, + struct wa_seg *seg, int curr_iso_frame) +{ + seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + seg->dto_urb->sg = NULL; + seg->dto_urb->num_sgs = 0; + /* dto urb buffer address pulled from iso_frame_desc. */ + seg->dto_urb->transfer_dma = xfer->urb->transfer_dma + + xfer->urb->iso_frame_desc[curr_iso_frame].offset; + /* The Alereon HWA sends a single URB with all isoc segs. */ + if (xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) + seg->dto_urb->transfer_buffer_length = seg->isoc_size; + else + seg->dto_urb->transfer_buffer_length = + xfer->urb->iso_frame_desc[curr_iso_frame].length; +} + +/* + * Populate buffer ptr and size, DMA buffer or SG list for the dto urb. + */ +static int __wa_populate_dto_urb(struct wa_xfer *xfer, + struct wa_seg *seg, size_t buf_itr_offset, size_t buf_itr_size) +{ + int result = 0; + + if (xfer->is_dma) { + seg->dto_urb->transfer_dma = + xfer->urb->transfer_dma + buf_itr_offset; + seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + seg->dto_urb->sg = NULL; + seg->dto_urb->num_sgs = 0; + } else { + /* do buffer or SG processing. */ + seg->dto_urb->transfer_flags &= + ~URB_NO_TRANSFER_DMA_MAP; + /* this should always be 0 before a resubmit. */ + seg->dto_urb->num_mapped_sgs = 0; + + if (xfer->urb->transfer_buffer) { + seg->dto_urb->transfer_buffer = + xfer->urb->transfer_buffer + + buf_itr_offset; + seg->dto_urb->sg = NULL; + seg->dto_urb->num_sgs = 0; + } else { + seg->dto_urb->transfer_buffer = NULL; + + /* + * allocate an SG list to store seg_size bytes + * and copy the subset of the xfer->urb->sg that + * matches the buffer subset we are about to + * read. + */ + seg->dto_urb->sg = wa_xfer_create_subset_sg( + xfer->urb->sg, + buf_itr_offset, buf_itr_size, + &(seg->dto_urb->num_sgs)); + if (!(seg->dto_urb->sg)) + result = -ENOMEM; + } + } + seg->dto_urb->transfer_buffer_length = buf_itr_size; + + return result; +} + +/* * Allocate the segs array and initialize each of them * * The segments are freed by wa_xfer_destroy() when the xfer use count @@ -719,13 +1101,14 @@ static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg, */ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) { - int result, cnt; + int result, cnt, iso_frame_offset; size_t alloc_size = sizeof(*xfer->seg[0]) - sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size; struct usb_device *usb_dev = xfer->wa->usb_dev; const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd; struct wa_seg *seg; size_t buf_itr, buf_size, buf_itr_size; + int xfer_isoc_frame_offset = 0; result = -ENOMEM; xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC); @@ -733,18 +1116,35 @@ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) goto error_segs_kzalloc; buf_itr = 0; buf_size = xfer->urb->transfer_buffer_length; + iso_frame_offset = 0; for (cnt = 0; cnt < xfer->segs; cnt++) { - seg = xfer->seg[cnt] = kmalloc(alloc_size, GFP_ATOMIC); + size_t iso_pkt_descr_size = 0; + int seg_isoc_frame_count = 0, seg_isoc_size = 0; + + if (usb_pipeisoc(xfer->urb->pipe)) { + seg_isoc_frame_count = + __wa_seg_calculate_isoc_frame_count(xfer, + xfer_isoc_frame_offset, &seg_isoc_size); + + iso_pkt_descr_size = + sizeof(struct wa_xfer_packet_info_hwaiso) + + (seg_isoc_frame_count * sizeof(__le16)); + } + seg = xfer->seg[cnt] = kmalloc(alloc_size + iso_pkt_descr_size, + GFP_ATOMIC); if (seg == NULL) goto error_seg_kmalloc; wa_seg_init(seg); seg->xfer = xfer; seg->index = cnt; - usb_fill_bulk_urb(&seg->urb, usb_dev, + seg->isoc_frame_count = seg_isoc_frame_count; + seg->isoc_frame_offset = xfer_isoc_frame_offset; + seg->isoc_size = seg_isoc_size; + usb_fill_bulk_urb(&seg->tr_urb, usb_dev, usb_sndbulkpipe(usb_dev, dto_epd->bEndpointAddress), &seg->xfer_hdr, xfer_hdr_size, - wa_seg_cb, seg); + wa_seg_tr_cb, seg); buf_itr_size = min(buf_size, xfer->seg_size); if (xfer->is_inbound == 0 && buf_size > 0) { /* outbound data. */ @@ -756,69 +1156,64 @@ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) usb_sndbulkpipe(usb_dev, dto_epd->bEndpointAddress), NULL, 0, wa_seg_dto_cb, seg); - if (xfer->is_dma) { - seg->dto_urb->transfer_dma = - xfer->urb->transfer_dma + buf_itr; - seg->dto_urb->transfer_flags |= - URB_NO_TRANSFER_DMA_MAP; - seg->dto_urb->transfer_buffer = NULL; - seg->dto_urb->sg = NULL; - seg->dto_urb->num_sgs = 0; + + if (usb_pipeisoc(xfer->urb->pipe)) { + /* iso packet descriptor. */ + seg->isoc_pack_desc_urb = + usb_alloc_urb(0, GFP_ATOMIC); + if (seg->isoc_pack_desc_urb == NULL) + goto error_iso_pack_desc_alloc; + /* + * The buffer for the isoc packet descriptor + * after the transfer request header in the + * segment object memory buffer. + */ + usb_fill_bulk_urb( + seg->isoc_pack_desc_urb, usb_dev, + usb_sndbulkpipe(usb_dev, + dto_epd->bEndpointAddress), + (void *)(&seg->xfer_hdr) + + xfer_hdr_size, + iso_pkt_descr_size, + wa_seg_iso_pack_desc_cb, seg); + + /* + * Fill in the xfer buffer information for the + * first isoc frame. Subsequent frames in this + * segment will be filled in and sent from the + * DTO completion routine, if needed. + */ + __wa_populate_dto_urb_isoc(xfer, seg, + xfer_isoc_frame_offset); + /* adjust starting frame offset for next seg. */ + xfer_isoc_frame_offset += seg_isoc_frame_count; } else { - /* do buffer or SG processing. */ - seg->dto_urb->transfer_flags &= - ~URB_NO_TRANSFER_DMA_MAP; - /* this should always be 0 before a resubmit. */ - seg->dto_urb->num_mapped_sgs = 0; - - if (xfer->urb->transfer_buffer) { - seg->dto_urb->transfer_buffer = - xfer->urb->transfer_buffer + - buf_itr; - seg->dto_urb->sg = NULL; - seg->dto_urb->num_sgs = 0; - } else { - /* allocate an SG list to store seg_size - bytes and copy the subset of the - xfer->urb->sg that matches the - buffer subset we are about to read. - */ - seg->dto_urb->sg = - wa_xfer_create_subset_sg( - xfer->urb->sg, - buf_itr, buf_itr_size, - &(seg->dto_urb->num_sgs)); - - if (!(seg->dto_urb->sg)) { - seg->dto_urb->num_sgs = 0; - goto error_sg_alloc; - } - - seg->dto_urb->transfer_buffer = NULL; - } + /* fill in the xfer buffer information. */ + result = __wa_populate_dto_urb(xfer, seg, + buf_itr, buf_itr_size); + if (result < 0) + goto error_seg_outbound_populate; + + buf_itr += buf_itr_size; + buf_size -= buf_itr_size; } - seg->dto_urb->transfer_buffer_length = buf_itr_size; } seg->status = WA_SEG_READY; - buf_itr += buf_itr_size; - buf_size -= buf_itr_size; } return 0; -error_sg_alloc: + /* + * Free the memory for the current segment which failed to init. + * Use the fact that cnt is left at were it failed. The remaining + * segments will be cleaned up by wa_xfer_destroy. + */ +error_iso_pack_desc_alloc: +error_seg_outbound_populate: usb_free_urb(xfer->seg[cnt]->dto_urb); error_dto_alloc: kfree(xfer->seg[cnt]); - cnt--; + xfer->seg[cnt] = NULL; error_seg_kmalloc: - /* use the fact that cnt is left at were it failed */ - for (; cnt >= 0; cnt--) { - if (xfer->seg[cnt] && xfer->is_inbound == 0) { - usb_free_urb(xfer->seg[cnt]->dto_urb); - kfree(xfer->seg[cnt]->dto_urb->sg); - } - kfree(xfer->seg[cnt]); - } error_segs_kzalloc: return result; } @@ -856,21 +1251,45 @@ static int __wa_xfer_setup(struct wa_xfer *xfer, struct urb *urb) wa_xfer_id_init(xfer); __wa_xfer_setup_hdr0(xfer, xfer_hdr0, xfer_type, xfer_hdr_size); - /* Fill remainig headers */ + /* Fill remaining headers */ xfer_hdr = xfer_hdr0; - transfer_size = urb->transfer_buffer_length; - xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ? - xfer->seg_size : transfer_size; - transfer_size -= xfer->seg_size; - for (cnt = 1; cnt < xfer->segs; cnt++) { - xfer_hdr = &xfer->seg[cnt]->xfer_hdr; - memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); - xfer_hdr->bTransferSegment = cnt; - xfer_hdr->dwTransferLength = transfer_size > xfer->seg_size ? - cpu_to_le32(xfer->seg_size) - : cpu_to_le32(transfer_size); - xfer->seg[cnt]->status = WA_SEG_READY; + if (xfer_type == WA_XFER_TYPE_ISO) { + xfer_hdr0->dwTransferLength = + cpu_to_le32(xfer->seg[0]->isoc_size); + for (cnt = 1; cnt < xfer->segs; cnt++) { + struct wa_xfer_packet_info_hwaiso *packet_desc; + struct wa_seg *seg = xfer->seg[cnt]; + + xfer_hdr = &seg->xfer_hdr; + packet_desc = ((void *)xfer_hdr) + xfer_hdr_size; + /* + * Copy values from the 0th header. Segment specific + * values are set below. + */ + memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); + xfer_hdr->bTransferSegment = cnt; + xfer_hdr->dwTransferLength = + cpu_to_le32(seg->isoc_size); + __wa_setup_isoc_packet_descr(packet_desc, xfer, seg); + seg->status = WA_SEG_READY; + } + } else { + transfer_size = urb->transfer_buffer_length; + xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ? + cpu_to_le32(xfer->seg_size) : + cpu_to_le32(transfer_size); transfer_size -= xfer->seg_size; + for (cnt = 1; cnt < xfer->segs; cnt++) { + xfer_hdr = &xfer->seg[cnt]->xfer_hdr; + memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); + xfer_hdr->bTransferSegment = cnt; + xfer_hdr->dwTransferLength = + transfer_size > xfer->seg_size ? + cpu_to_le32(xfer->seg_size) + : cpu_to_le32(transfer_size); + xfer->seg[cnt]->status = WA_SEG_READY; + transfer_size -= xfer->seg_size; + } } xfer_hdr->bTransferSegment |= 0x80; /* this is the last segment */ result = 0; @@ -885,20 +1304,46 @@ error_setup_sizes: * rpipe->seg_lock is held! */ static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer, - struct wa_seg *seg) + struct wa_seg *seg, int *dto_done) { int result; - result = usb_submit_urb(&seg->urb, GFP_ATOMIC); + + /* default to done unless we encounter a multi-frame isoc segment. */ + *dto_done = 1; + + /* submit the transfer request. */ + result = usb_submit_urb(&seg->tr_urb, GFP_ATOMIC); if (result < 0) { - printk(KERN_ERR "xfer %p#%u: REQ submit failed: %d\n", - xfer, seg->index, result); + pr_err("%s: xfer %p#%u: REQ submit failed: %d\n", + __func__, xfer, seg->index, result); goto error_seg_submit; } + /* submit the isoc packet descriptor if present. */ + if (seg->isoc_pack_desc_urb) { + struct wahc *wa = xfer->wa; + + result = usb_submit_urb(seg->isoc_pack_desc_urb, GFP_ATOMIC); + if (result < 0) { + pr_err("%s: xfer %p#%u: ISO packet descriptor submit failed: %d\n", + __func__, xfer, seg->index, result); + goto error_iso_pack_desc_submit; + } + xfer->dto_isoc_frame_index = 0; + /* + * If this segment contains more than one isoc frame, hold + * onto the dto resource until we send all frames. + * Only applies to non-Alereon devices. + */ + if (((wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) == 0) + && (seg->isoc_frame_count > 1)) + *dto_done = 0; + } + /* submit the out data if this is an out request. */ if (seg->dto_urb) { result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); if (result < 0) { - printk(KERN_ERR "xfer %p#%u: DTO submit failed: %d\n", - xfer, seg->index, result); + pr_err("%s: xfer %p#%u: DTO submit failed: %d\n", + __func__, xfer, seg->index, result); goto error_dto_submit; } } @@ -907,38 +1352,48 @@ static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer, return 0; error_dto_submit: - usb_unlink_urb(&seg->urb); + usb_unlink_urb(seg->isoc_pack_desc_urb); +error_iso_pack_desc_submit: + usb_unlink_urb(&seg->tr_urb); error_seg_submit: seg->status = WA_SEG_ERROR; seg->result = result; + *dto_done = 1; return result; } /* - * Execute more queued request segments until the maximum concurrent allowed + * Execute more queued request segments until the maximum concurrent allowed. + * Return true if the DTO resource was acquired and released. * * The ugly unlock/lock sequence on the error path is needed as the * xfer->lock normally nests the seg_lock and not viceversa. - * */ -static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) +static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting) { - int result; + int result, dto_acquired = 0, dto_done = 0; struct device *dev = &rpipe->wa->usb_iface->dev; struct wa_seg *seg; struct wa_xfer *xfer; unsigned long flags; + *dto_waiting = 0; + spin_lock_irqsave(&rpipe->seg_lock, flags); while (atomic_read(&rpipe->segs_available) > 0 - && !list_empty(&rpipe->seg_list)) { + && !list_empty(&rpipe->seg_list) + && (dto_acquired = __wa_dto_try_get(rpipe->wa))) { seg = list_first_entry(&(rpipe->seg_list), struct wa_seg, list_node); list_del(&seg->list_node); xfer = seg->xfer; - result = __wa_seg_submit(rpipe, xfer, seg); - dev_dbg(dev, "xfer %p#%u submitted from delayed [%d segments available] %d\n", - xfer, seg->index, atomic_read(&rpipe->segs_available), result); + result = __wa_seg_submit(rpipe, xfer, seg, &dto_done); + /* release the dto resource if this RPIPE is done with it. */ + if (dto_done) + __wa_dto_put(rpipe->wa); + dev_dbg(dev, "xfer %p ID %08X#%u submitted from delayed [%d segments available] %d\n", + xfer, wa_xfer_id(xfer), seg->index, + atomic_read(&rpipe->segs_available), result); if (unlikely(result < 0)) { spin_unlock_irqrestore(&rpipe->seg_lock, flags); spin_lock_irqsave(&xfer->lock, flags); @@ -948,7 +1403,37 @@ static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) spin_lock_irqsave(&rpipe->seg_lock, flags); } } + /* + * Mark this RPIPE as waiting if dto was not acquired, there are + * delayed segs and no active transfers to wake us up later. + */ + if (!dto_acquired && !list_empty(&rpipe->seg_list) + && (atomic_read(&rpipe->segs_available) == + le16_to_cpu(rpipe->descr.wRequests))) + *dto_waiting = 1; + spin_unlock_irqrestore(&rpipe->seg_lock, flags); + + return dto_done; +} + +static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) +{ + int dto_waiting; + int dto_done = __wa_xfer_delayed_run(rpipe, &dto_waiting); + + /* + * If this RPIPE is waiting on the DTO resource, add it to the tail of + * the waiting list. + * Otherwise, if the WA DTO resource was acquired and released by + * __wa_xfer_delayed_run, another RPIPE may have attempted to acquire + * DTO and failed during that time. Check the delayed list and process + * any waiters. Start searching from the next RPIPE index. + */ + if (dto_waiting) + wa_add_delayed_rpipe(rpipe->wa, rpipe); + else if (dto_done) + wa_check_for_delayed_rpipes(rpipe->wa); } /* @@ -960,7 +1445,7 @@ static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) */ static int __wa_xfer_submit(struct wa_xfer *xfer) { - int result; + int result, dto_acquired = 0, dto_done = 0, dto_waiting = 0; struct wahc *wa = xfer->wa; struct device *dev = &wa->usb_iface->dev; unsigned cnt; @@ -979,27 +1464,58 @@ static int __wa_xfer_submit(struct wa_xfer *xfer) result = 0; spin_lock_irqsave(&rpipe->seg_lock, flags); for (cnt = 0; cnt < xfer->segs; cnt++) { + int delay_seg = 1; + available = atomic_read(&rpipe->segs_available); empty = list_empty(&rpipe->seg_list); seg = xfer->seg[cnt]; - dev_dbg(dev, "xfer %p#%u: available %u empty %u (%s)\n", - xfer, cnt, available, empty, - available == 0 || !empty ? "delayed" : "submitted"); - if (available == 0 || !empty) { - dev_dbg(dev, "xfer %p#%u: delayed\n", xfer, cnt); + if (available && empty) { + /* + * Only attempt to acquire DTO if we have a segment + * to send. + */ + dto_acquired = __wa_dto_try_get(rpipe->wa); + if (dto_acquired) { + delay_seg = 0; + result = __wa_seg_submit(rpipe, xfer, seg, + &dto_done); + dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u submitted\n", + xfer, wa_xfer_id(xfer), cnt, available, + empty); + if (dto_done) + __wa_dto_put(rpipe->wa); + + if (result < 0) { + __wa_xfer_abort(xfer); + goto error_seg_submit; + } + } + } + + if (delay_seg) { + dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u delayed\n", + xfer, wa_xfer_id(xfer), cnt, available, empty); seg->status = WA_SEG_DELAYED; list_add_tail(&seg->list_node, &rpipe->seg_list); - } else { - result = __wa_seg_submit(rpipe, xfer, seg); - if (result < 0) { - __wa_xfer_abort(xfer); - goto error_seg_submit; - } } xfer->segs_submitted++; } error_seg_submit: + /* + * Mark this RPIPE as waiting if dto was not acquired, there are + * delayed segs and no active transfers to wake us up later. + */ + if (!dto_acquired && !list_empty(&rpipe->seg_list) + && (atomic_read(&rpipe->segs_available) == + le16_to_cpu(rpipe->descr.wRequests))) + dto_waiting = 1; spin_unlock_irqrestore(&rpipe->seg_lock, flags); + + if (dto_waiting) + wa_add_delayed_rpipe(rpipe->wa, rpipe); + else if (dto_done) + wa_check_for_delayed_rpipes(rpipe->wa); + return result; } @@ -1025,7 +1541,7 @@ error_seg_submit: * result never kicks in, the xfer will timeout from the USB code and * dequeue() will be called. */ -static void wa_urb_enqueue_b(struct wa_xfer *xfer) +static int wa_urb_enqueue_b(struct wa_xfer *xfer) { int result; unsigned long flags; @@ -1036,18 +1552,22 @@ static void wa_urb_enqueue_b(struct wa_xfer *xfer) unsigned done; result = rpipe_get_by_ep(wa, xfer->ep, urb, xfer->gfp); - if (result < 0) + if (result < 0) { + pr_err("%s: error_rpipe_get\n", __func__); goto error_rpipe_get; + } result = -ENODEV; /* FIXME: segmentation broken -- kills DWA */ mutex_lock(&wusbhc->mutex); /* get a WUSB dev */ if (urb->dev == NULL) { mutex_unlock(&wusbhc->mutex); + pr_err("%s: error usb dev gone\n", __func__); goto error_dev_gone; } wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); if (wusb_dev == NULL) { mutex_unlock(&wusbhc->mutex); + pr_err("%s: error wusb dev gone\n", __func__); goto error_dev_gone; } mutex_unlock(&wusbhc->mutex); @@ -1055,21 +1575,28 @@ static void wa_urb_enqueue_b(struct wa_xfer *xfer) spin_lock_irqsave(&xfer->lock, flags); xfer->wusb_dev = wusb_dev; result = urb->status; - if (urb->status != -EINPROGRESS) + if (urb->status != -EINPROGRESS) { + pr_err("%s: error_dequeued\n", __func__); goto error_dequeued; + } result = __wa_xfer_setup(xfer, urb); - if (result < 0) + if (result < 0) { + pr_err("%s: error_xfer_setup\n", __func__); goto error_xfer_setup; + } result = __wa_xfer_submit(xfer); - if (result < 0) + if (result < 0) { + pr_err("%s: error_xfer_submit\n", __func__); goto error_xfer_submit; + } spin_unlock_irqrestore(&xfer->lock, flags); - return; + return 0; - /* this is basically wa_xfer_completion() broken up wa_xfer_giveback() - * does a wa_xfer_put() that will call wa_xfer_destroy() and clean - * upundo setup(). + /* + * this is basically wa_xfer_completion() broken up wa_xfer_giveback() + * does a wa_xfer_put() that will call wa_xfer_destroy() and undo + * setup(). */ error_xfer_setup: error_dequeued: @@ -1081,8 +1608,7 @@ error_dev_gone: rpipe_put(xfer->ep->hcpriv); error_rpipe_get: xfer->result = result; - wa_xfer_giveback(xfer); - return; + return result; error_xfer_submit: done = __wa_xfer_is_done(xfer); @@ -1090,6 +1616,8 @@ error_xfer_submit: spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); + /* return success since the completion routine will run. */ + return 0; } /* @@ -1123,7 +1651,8 @@ void wa_urb_enqueue_run(struct work_struct *ws) list_del_init(&xfer->list_node); urb = xfer->urb; - wa_urb_enqueue_b(xfer); + if (wa_urb_enqueue_b(xfer) < 0) + wa_xfer_giveback(xfer); usb_put_urb(urb); /* taken when queuing */ } } @@ -1229,7 +1758,19 @@ int wa_urb_enqueue(struct wahc *wa, struct usb_host_endpoint *ep, spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); queue_work(wusbd, &wa->xfer_enqueue_work); } else { - wa_urb_enqueue_b(xfer); + result = wa_urb_enqueue_b(xfer); + if (result < 0) { + /* + * URB submit/enqueue failed. Clean up, return an + * error and do not run the callback. This avoids + * an infinite submit/complete loop. + */ + dev_err(dev, "%s: URB enqueue failed: %d\n", + __func__, result); + wa_put(xfer->wa); + wa_xfer_put(xfer); + return result; + } } return 0; @@ -1264,7 +1805,7 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb) struct wa_xfer *xfer; struct wa_seg *seg; struct wa_rpipe *rpipe; - unsigned cnt; + unsigned cnt, done = 0, xfer_abort_pending; unsigned rpipe_ready = 0; xfer = urb->hcpriv; @@ -1278,6 +1819,7 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb) goto out; } spin_lock_irqsave(&xfer->lock, flags); + pr_debug("%s: DEQUEUE xfer id 0x%08X\n", __func__, wa_xfer_id(xfer)); rpipe = xfer->ep->hcpriv; if (rpipe == NULL) { pr_debug("%s: xfer id 0x%08X has no RPIPE. %s", @@ -1293,9 +1835,11 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb) if (xfer->seg == NULL) /* still hasn't reached */ goto out_unlock; /* setup(), enqueue_b() completes */ /* Ok, the xfer is in flight already, it's been setup and submitted.*/ - __wa_xfer_abort(xfer); + xfer_abort_pending = __wa_xfer_abort(xfer) >= 0; for (cnt = 0; cnt < xfer->segs; cnt++) { seg = xfer->seg[cnt]; + pr_debug("%s: xfer id 0x%08X#%d status = %d\n", + __func__, wa_xfer_id(xfer), cnt, seg->status); switch (seg->status) { case WA_SEG_NOTREADY: case WA_SEG_READY: @@ -1304,42 +1848,50 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb) WARN_ON(1); break; case WA_SEG_DELAYED: + /* + * delete from rpipe delayed list. If no segments on + * this xfer have been submitted, __wa_xfer_is_done will + * trigger a giveback below. Otherwise, the submitted + * segments will be completed in the DTI interrupt. + */ seg->status = WA_SEG_ABORTED; spin_lock_irqsave(&rpipe->seg_lock, flags2); list_del(&seg->list_node); xfer->segs_done++; - rpipe_ready = rpipe_avail_inc(rpipe); spin_unlock_irqrestore(&rpipe->seg_lock, flags2); break; - case WA_SEG_SUBMITTED: - seg->status = WA_SEG_ABORTED; - usb_unlink_urb(&seg->urb); - if (xfer->is_inbound == 0) - usb_unlink_urb(seg->dto_urb); - xfer->segs_done++; - rpipe_ready = rpipe_avail_inc(rpipe); - break; - case WA_SEG_PENDING: - seg->status = WA_SEG_ABORTED; - xfer->segs_done++; - rpipe_ready = rpipe_avail_inc(rpipe); - break; - case WA_SEG_DTI_PENDING: - usb_unlink_urb(wa->dti_urb); - seg->status = WA_SEG_ABORTED; - xfer->segs_done++; - rpipe_ready = rpipe_avail_inc(rpipe); - break; case WA_SEG_DONE: case WA_SEG_ERROR: case WA_SEG_ABORTED: break; + /* + * In the states below, the HWA device already knows + * about the transfer. If an abort request was sent, + * allow the HWA to process it and wait for the + * results. Otherwise, the DTI state and seg completed + * counts can get out of sync. + */ + case WA_SEG_SUBMITTED: + case WA_SEG_PENDING: + case WA_SEG_DTI_PENDING: + /* + * Check if the abort was successfully sent. This could + * be false if the HWA has been removed but we haven't + * gotten the disconnect notification yet. + */ + if (!xfer_abort_pending) { + seg->status = WA_SEG_ABORTED; + rpipe_ready = rpipe_avail_inc(rpipe); + xfer->segs_done++; + } + break; } } xfer->result = urb->status; /* -ENOENT or -ECONNRESET */ - __wa_xfer_is_done(xfer); + done = __wa_xfer_is_done(xfer); spin_unlock_irqrestore(&xfer->lock, flags); - wa_xfer_completion(xfer); + if (done) + wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); return 0; @@ -1410,13 +1962,56 @@ static int wa_xfer_status_to_errno(u8 status) } /* + * If a last segment flag and/or a transfer result error is encountered, + * no other segment transfer results will be returned from the device. + * Mark the remaining submitted or pending xfers as completed so that + * the xfer will complete cleanly. + */ +static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer, + struct wa_seg *incoming_seg) +{ + int index; + struct wa_rpipe *rpipe = xfer->ep->hcpriv; + + for (index = incoming_seg->index + 1; index < xfer->segs_submitted; + index++) { + struct wa_seg *current_seg = xfer->seg[index]; + + BUG_ON(current_seg == NULL); + + switch (current_seg->status) { + case WA_SEG_SUBMITTED: + case WA_SEG_PENDING: + case WA_SEG_DTI_PENDING: + rpipe_avail_inc(rpipe); + /* + * do not increment RPIPE avail for the WA_SEG_DELAYED case + * since it has not been submitted to the RPIPE. + */ + case WA_SEG_DELAYED: + xfer->segs_done++; + current_seg->status = incoming_seg->status; + break; + case WA_SEG_ABORTED: + break; + default: + WARN(1, "%s: xfer 0x%08X#%d. bad seg status = %d\n", + __func__, wa_xfer_id(xfer), index, + current_seg->status); + break; + } + } +} + +/* * Process a xfer result completion message * - * inbound transfers: need to schedule a DTI read + * inbound transfers: need to schedule a buf_in_urb read * * FIXME: this function needs to be broken up in parts */ -static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer) +static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer, + struct wa_xfer_result *xfer_result) { int result; struct device *dev = &wa->usb_iface->dev; @@ -1424,8 +2019,7 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer) u8 seg_idx; struct wa_seg *seg; struct wa_rpipe *rpipe; - struct wa_xfer_result *xfer_result = wa->xfer_result; - u8 done = 0; + unsigned done = 0; u8 usb_status; unsigned rpipe_ready = 0; @@ -1436,8 +2030,8 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer) seg = xfer->seg[seg_idx]; rpipe = xfer->ep->hcpriv; usb_status = xfer_result->bTransferStatus; - dev_dbg(dev, "xfer %p#%u: bTransferStatus 0x%02x (seg status %u)\n", - xfer, seg_idx, usb_status, seg->status); + dev_dbg(dev, "xfer %p ID 0x%08X#%u: bTransferStatus 0x%02x (seg status %u)\n", + xfer, wa_xfer_id(xfer), seg_idx, usb_status, seg->status); if (seg->status == WA_SEG_ABORTED || seg->status == WA_SEG_ERROR) /* already handled */ goto segment_aborted; @@ -1453,12 +2047,19 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer) seg->result = wa_xfer_status_to_errno(usb_status); dev_err(dev, "DTI: xfer %p#:%08X:%u failed (0x%02x)\n", xfer, xfer->id, seg->index, usb_status); + seg->status = ((usb_status & 0x7F) == WA_XFER_STATUS_ABORTED) ? + WA_SEG_ABORTED : WA_SEG_ERROR; goto error_complete; } /* FIXME: we ignore warnings, tally them for stats */ if (usb_status & 0x40) /* Warning?... */ usb_status = 0; /* ... pass */ - if (xfer->is_inbound) { /* IN data phase: read to buffer */ + if (usb_pipeisoc(xfer->urb->pipe)) { + /* set up WA state to read the isoc packet status next. */ + wa->dti_isoc_xfer_in_progress = wa_xfer_id(xfer); + wa->dti_isoc_xfer_seg = seg_idx; + wa->dti_state = WA_DTI_ISOC_PACKET_STATUS_PENDING; + } else if (xfer->is_inbound) { /* IN data phase: read to buffer */ seg->status = WA_SEG_DTI_PENDING; BUG_ON(wa->buf_in_urb->status == -EINPROGRESS); /* this should always be 0 before a resubmit. */ @@ -1535,12 +2136,14 @@ error_submit_buf_in: xfer, seg_idx, result); seg->result = result; kfree(wa->buf_in_urb->sg); + wa->buf_in_urb->sg = NULL; error_sg_alloc: __wa_xfer_abort(xfer); -error_complete: seg->status = WA_SEG_ERROR; +error_complete: xfer->segs_done++; rpipe_ready = rpipe_avail_inc(rpipe); + wa_complete_remaining_xfer_segs(xfer, seg); done = __wa_xfer_is_done(xfer); /* * queue work item to clear STALL for control endpoints. @@ -1552,10 +2155,8 @@ error_complete: dev_info(dev, "Control EP stall. Queue delayed work.\n"); spin_lock_irq(&wa->xfer_list_lock); - /* remove xfer from xfer_list. */ - list_del(&xfer->list_node); - /* add xfer to xfer_errored_list. */ - list_add_tail(&xfer->list_node, &wa->xfer_errored_list); + /* move xfer from xfer_list to xfer_errored_list. */ + list_move_tail(&xfer->list_node, &wa->xfer_errored_list); spin_unlock_irq(&wa->xfer_list_lock); spin_unlock_irqrestore(&xfer->lock, flags); queue_work(wusbd, &wa->xfer_error_work); @@ -1587,6 +2188,90 @@ segment_aborted: } /* + * Process a isochronous packet status message + * + * inbound transfers: need to schedule a buf_in_urb read + */ +static void wa_process_iso_packet_status(struct wahc *wa, struct urb *urb) +{ + struct device *dev = &wa->usb_iface->dev; + struct wa_xfer_packet_status_hwaiso *packet_status; + struct wa_xfer_packet_status_len_hwaiso *status_array; + struct wa_xfer *xfer; + unsigned long flags; + struct wa_seg *seg; + struct wa_rpipe *rpipe; + unsigned done = 0; + unsigned rpipe_ready = 0, seg_index; + int expected_size; + + /* We have a xfer result buffer; check it */ + dev_dbg(dev, "DTI: isoc packet status %d bytes at %p\n", + urb->actual_length, urb->transfer_buffer); + packet_status = (struct wa_xfer_packet_status_hwaiso *)(wa->dti_buf); + if (packet_status->bPacketType != WA_XFER_ISO_PACKET_STATUS) { + dev_err(dev, "DTI Error: isoc packet status--bad type 0x%02x\n", + packet_status->bPacketType); + goto error_parse_buffer; + } + xfer = wa_xfer_get_by_id(wa, wa->dti_isoc_xfer_in_progress); + if (xfer == NULL) { + dev_err(dev, "DTI Error: isoc packet status--unknown xfer 0x%08x\n", + wa->dti_isoc_xfer_in_progress); + goto error_parse_buffer; + } + spin_lock_irqsave(&xfer->lock, flags); + if (unlikely(wa->dti_isoc_xfer_seg >= xfer->segs)) + goto error_bad_seg; + seg = xfer->seg[wa->dti_isoc_xfer_seg]; + rpipe = xfer->ep->hcpriv; + expected_size = sizeof(*packet_status) + + (sizeof(packet_status->PacketStatus[0]) * + seg->isoc_frame_count); + if (urb->actual_length != expected_size) { + dev_err(dev, "DTI Error: isoc packet status--bad urb length (%d bytes vs %d needed)\n", + urb->actual_length, expected_size); + goto error_bad_seg; + } + if (le16_to_cpu(packet_status->wLength) != expected_size) { + dev_err(dev, "DTI Error: isoc packet status--bad length %u\n", + le16_to_cpu(packet_status->wLength)); + goto error_bad_seg; + } + /* isoc packet status and lengths back xfer urb. */ + status_array = packet_status->PacketStatus; + for (seg_index = 0; seg_index < seg->isoc_frame_count; ++seg_index) { + xfer->urb->iso_frame_desc[seg->index].status = + wa_xfer_status_to_errno( + le16_to_cpu(status_array[seg_index].PacketStatus)); + xfer->urb->iso_frame_desc[seg->index].actual_length = + le16_to_cpu(status_array[seg_index].PacketLength); + } + + if (!xfer->is_inbound) { + /* OUT transfer, complete it -- */ + seg->status = WA_SEG_DONE; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + } + spin_unlock_irqrestore(&xfer->lock, flags); + wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + wa_xfer_put(xfer); + return; + +error_bad_seg: + spin_unlock_irqrestore(&xfer->lock, flags); + wa_xfer_put(xfer); +error_parse_buffer: + return; +} + +/* * Callback for the IN data phase * * If successful transition state; otherwise, take a note of the @@ -1687,56 +2372,61 @@ static void wa_buf_in_cb(struct urb *urb) * We go back to OFF when we detect a ENOENT or ESHUTDOWN (or too many * errors) in the URBs. */ -static void wa_xfer_result_cb(struct urb *urb) +static void wa_dti_cb(struct urb *urb) { int result; struct wahc *wa = urb->context; struct device *dev = &wa->usb_iface->dev; - struct wa_xfer_result *xfer_result; u32 xfer_id; - struct wa_xfer *xfer; u8 usb_status; BUG_ON(wa->dti_urb != urb); switch (wa->dti_urb->status) { case 0: - /* We have a xfer result buffer; check it */ - dev_dbg(dev, "DTI: xfer result %d bytes at %p\n", - urb->actual_length, urb->transfer_buffer); - if (wa->dti_urb->actual_length != sizeof(*xfer_result)) { - dev_err(dev, "DTI Error: xfer result--bad size " - "xfer result (%d bytes vs %zu needed)\n", - urb->actual_length, sizeof(*xfer_result)); - break; - } - xfer_result = wa->xfer_result; - if (xfer_result->hdr.bLength != sizeof(*xfer_result)) { - dev_err(dev, "DTI Error: xfer result--" - "bad header length %u\n", - xfer_result->hdr.bLength); - break; - } - if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) { - dev_err(dev, "DTI Error: xfer result--" - "bad header type 0x%02x\n", - xfer_result->hdr.bNotifyType); - break; - } - usb_status = xfer_result->bTransferStatus & 0x3f; - if (usb_status == WA_XFER_STATUS_NOT_FOUND) - /* taken care of already */ - break; - xfer_id = xfer_result->dwTransferID; - xfer = wa_xfer_get_by_id(wa, xfer_id); - if (xfer == NULL) { - /* FIXME: transaction might have been cancelled */ - dev_err(dev, "DTI Error: xfer result--" - "unknown xfer 0x%08x (status 0x%02x)\n", - xfer_id, usb_status); - break; + if (wa->dti_state == WA_DTI_TRANSFER_RESULT_PENDING) { + struct wa_xfer_result *xfer_result; + struct wa_xfer *xfer; + + /* We have a xfer result buffer; check it */ + dev_dbg(dev, "DTI: xfer result %d bytes at %p\n", + urb->actual_length, urb->transfer_buffer); + if (urb->actual_length != sizeof(*xfer_result)) { + dev_err(dev, "DTI Error: xfer result--bad size xfer result (%d bytes vs %zu needed)\n", + urb->actual_length, + sizeof(*xfer_result)); + break; + } + xfer_result = (struct wa_xfer_result *)(wa->dti_buf); + if (xfer_result->hdr.bLength != sizeof(*xfer_result)) { + dev_err(dev, "DTI Error: xfer result--bad header length %u\n", + xfer_result->hdr.bLength); + break; + } + if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) { + dev_err(dev, "DTI Error: xfer result--bad header type 0x%02x\n", + xfer_result->hdr.bNotifyType); + break; + } + usb_status = xfer_result->bTransferStatus & 0x3f; + if (usb_status == WA_XFER_STATUS_NOT_FOUND) + /* taken care of already */ + break; + xfer_id = le32_to_cpu(xfer_result->dwTransferID); + xfer = wa_xfer_get_by_id(wa, xfer_id); + if (xfer == NULL) { + /* FIXME: transaction not found. */ + dev_err(dev, "DTI Error: xfer result--unknown xfer 0x%08x (status 0x%02x)\n", + xfer_id, usb_status); + break; + } + wa_xfer_result_chew(wa, xfer, xfer_result); + wa_xfer_put(xfer); + } else if (wa->dti_state == WA_DTI_ISOC_PACKET_STATUS_PENDING) { + wa_process_iso_packet_status(wa, urb); + } else { + dev_err(dev, "DTI Error: unexpected EP state = %d\n", + wa->dti_state); } - wa_xfer_result_chew(wa, xfer); - wa_xfer_put(xfer); break; case -ENOENT: /* (we killed the URB)...so, no broadcast */ case -ESHUTDOWN: /* going away! */ @@ -1777,7 +2467,7 @@ out: * don't really set it up and start it until the first xfer complete * notification arrives, which is what we do here. * - * Follow up in wa_xfer_result_cb(), as that's where the whole state + * Follow up in wa_dti_cb(), as that's where the whole state * machine starts. * * So here we just initialize the DTI URB for reading transfer result @@ -1813,8 +2503,8 @@ void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr) usb_fill_bulk_urb( wa->dti_urb, wa->usb_dev, usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint), - wa->xfer_result, wa->xfer_result_size, - wa_xfer_result_cb, wa); + wa->dti_buf, wa->dti_buf_size, + wa_dti_cb, wa); wa->buf_in_urb = usb_alloc_urb(0, GFP_KERNEL); if (wa->buf_in_urb == NULL) { @@ -1836,6 +2526,7 @@ out: error_dti_urb_submit: usb_put_urb(wa->buf_in_urb); + wa->buf_in_urb = NULL; error_buf_in_urb_alloc: usb_put_urb(wa->dti_urb); wa->dti_urb = NULL; |