diff options
Diffstat (limited to 'drivers/usb')
45 files changed, 1194 insertions, 1091 deletions
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 0716cdb44cd..0a3dc5ece63 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_PCI) += host/ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ -obj-$(CONFIG_USB_ISP1760_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_FHCI_HCD) += host/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 0a69c0977e3..ddeb6919253 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -16,7 +16,8 @@ * v0.9 - thorough cleaning, URBification, almost a rewrite * v0.10 - some more cleanups * v0.11 - fixed flow control, read error doesn't stop reads - * v0.12 - added TIOCM ioctls, added break handling, made struct acm kmalloced + * v0.12 - added TIOCM ioctls, added break handling, made struct acm + * kmalloced * v0.13 - added termios, added hangup * v0.14 - sized down struct acm * v0.15 - fixed flow control again - characters could be lost @@ -62,7 +63,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/mutex.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/cdc.h> #include <asm/byteorder.h> @@ -87,7 +88,10 @@ static struct acm *acm_table[ACM_TTY_MINORS]; static DEFINE_MUTEX(open_mutex); -#define ACM_READY(acm) (acm && acm->dev && acm->used) +#define ACM_READY(acm) (acm && acm->dev && acm->port.count) + +static const struct tty_port_operations acm_port_ops = { +}; #ifdef VERBOSE_DEBUG #define verbose 1 @@ -99,13 +103,15 @@ static DEFINE_MUTEX(open_mutex); * Functions for ACM control messages. */ -static int acm_ctrl_msg(struct acm *acm, int request, int value, void *buf, int len) +static int acm_ctrl_msg(struct acm *acm, int request, int value, + void *buf, int len) { int retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0), request, USB_RT_ACM, value, acm->control->altsetting[0].desc.bInterfaceNumber, buf, len, 5000); - dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d", request, value, len, retval); + dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d", + request, value, len, retval); return retval < 0 ? retval : 0; } @@ -150,9 +156,8 @@ static int acm_wb_is_avail(struct acm *acm) n = ACM_NW; spin_lock_irqsave(&acm->write_lock, flags); - for (i = 0; i < ACM_NW; i++) { + for (i = 0; i < ACM_NW; i++) n -= acm->wb[i].use; - } spin_unlock_irqrestore(&acm->write_lock, flags); return n; } @@ -183,7 +188,8 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb) wb->urb->transfer_buffer_length = wb->len; wb->urb->dev = acm->dev; - if ((rc = usb_submit_urb(wb->urb, GFP_ATOMIC)) < 0) { + rc = usb_submit_urb(wb->urb, GFP_ATOMIC); + if (rc < 0) { dbg("usb_submit_urb(write bulk) failed: %d", rc); acm_write_done(acm, wb); } @@ -262,6 +268,7 @@ static void acm_ctrl_irq(struct urb *urb) { struct acm *acm = urb->context; struct usb_cdc_notification *dr = urb->transfer_buffer; + struct tty_struct *tty; unsigned char *data; int newctrl; int retval; @@ -287,40 +294,45 @@ static void acm_ctrl_irq(struct urb *urb) data = (unsigned char *)(dr + 1); switch (dr->bNotificationType) { + case USB_CDC_NOTIFY_NETWORK_CONNECTION: + dbg("%s network", dr->wValue ? + "connected to" : "disconnected from"); + break; - case USB_CDC_NOTIFY_NETWORK_CONNECTION: - - dbg("%s network", dr->wValue ? "connected to" : "disconnected from"); - break; - - case USB_CDC_NOTIFY_SERIAL_STATE: - - newctrl = get_unaligned_le16(data); + case USB_CDC_NOTIFY_SERIAL_STATE: + tty = tty_port_tty_get(&acm->port); + newctrl = get_unaligned_le16(data); - if (acm->tty && !acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { + if (tty) { + if (!acm->clocal && + (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { dbg("calling hangup"); - tty_hangup(acm->tty); + tty_hangup(tty); } + tty_kref_put(tty); + } - acm->ctrlin = newctrl; - - dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c", - acm->ctrlin & ACM_CTRL_DCD ? '+' : '-', acm->ctrlin & ACM_CTRL_DSR ? '+' : '-', - acm->ctrlin & ACM_CTRL_BRK ? '+' : '-', acm->ctrlin & ACM_CTRL_RI ? '+' : '-', - acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-', acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-', - acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-'); + acm->ctrlin = newctrl; + dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c", + acm->ctrlin & ACM_CTRL_DCD ? '+' : '-', + acm->ctrlin & ACM_CTRL_DSR ? '+' : '-', + acm->ctrlin & ACM_CTRL_BRK ? '+' : '-', + acm->ctrlin & ACM_CTRL_RI ? '+' : '-', + acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-', + acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-', + acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-'); break; - default: - dbg("unknown notification %d received: index %d len %d data0 %d data1 %d", - dr->bNotificationType, dr->wIndex, - dr->wLength, data[0], data[1]); - break; + default: + dbg("unknown notification %d received: index %d len %d data0 %d data1 %d", + dr->bNotificationType, dr->wIndex, + dr->wLength, data[0], data[1]); + break; } exit: usb_mark_last_busy(acm->dev); - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with " "result %d", __func__, retval); @@ -371,15 +383,14 @@ static void acm_rx_tasklet(unsigned long _acm) { struct acm *acm = (void *)_acm; struct acm_rb *buf; - struct tty_struct *tty = acm->tty; + struct tty_struct *tty; struct acm_ru *rcv; unsigned long flags; unsigned char throttled; dbg("Entering acm_rx_tasklet"); - if (!ACM_READY(acm)) - { + if (!ACM_READY(acm)) { dbg("acm_rx_tasklet: ACM not ready"); return; } @@ -387,12 +398,13 @@ static void acm_rx_tasklet(unsigned long _acm) spin_lock_irqsave(&acm->throttle_lock, flags); throttled = acm->throttle; spin_unlock_irqrestore(&acm->throttle_lock, flags); - if (throttled) - { + if (throttled) { dbg("acm_rx_tasklet: throttled"); return; } + tty = tty_port_tty_get(&acm->port); + next_buffer: spin_lock_irqsave(&acm->read_lock, flags); if (list_empty(&acm->filled_read_bufs)) { @@ -406,20 +418,22 @@ next_buffer: dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size); - tty_buffer_request_room(tty, buf->size); - spin_lock_irqsave(&acm->throttle_lock, flags); - throttled = acm->throttle; - spin_unlock_irqrestore(&acm->throttle_lock, flags); - if (!throttled) - tty_insert_flip_string(tty, buf->base, buf->size); - tty_flip_buffer_push(tty); - - if (throttled) { - dbg("Throttling noticed"); - spin_lock_irqsave(&acm->read_lock, flags); - list_add(&buf->list, &acm->filled_read_bufs); - spin_unlock_irqrestore(&acm->read_lock, flags); - return; + if (tty) { + spin_lock_irqsave(&acm->throttle_lock, flags); + throttled = acm->throttle; + spin_unlock_irqrestore(&acm->throttle_lock, flags); + if (!throttled) { + tty_buffer_request_room(tty, buf->size); + tty_insert_flip_string(tty, buf->base, buf->size); + tty_flip_buffer_push(tty); + } else { + tty_kref_put(tty); + dbg("Throttling noticed"); + spin_lock_irqsave(&acm->read_lock, flags); + list_add(&buf->list, &acm->filled_read_bufs); + spin_unlock_irqrestore(&acm->read_lock, flags); + return; + } } spin_lock_irqsave(&acm->read_lock, flags); @@ -428,6 +442,8 @@ next_buffer: goto next_buffer; urbs: + tty_kref_put(tty); + while (!list_empty(&acm->spare_read_bufs)) { spin_lock_irqsave(&acm->read_lock, flags); if (list_empty(&acm->spare_read_urbs)) { @@ -454,10 +470,11 @@ urbs: rcv->urb->transfer_dma = buf->dma; rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - /* This shouldn't kill the driver as unsuccessful URBs are returned to the - free-urbs-pool and resubmited ASAP */ + /* This shouldn't kill the driver as unsuccessful URBs are + returned to the free-urbs-pool and resubmited ASAP */ spin_lock_irqsave(&acm->read_lock, flags); - if (acm->susp_count || usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) { + if (acm->susp_count || + usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) { list_add(&buf->list, &acm->spare_read_bufs); list_add(&rcv->list, &acm->spare_read_urbs); acm->processing = 0; @@ -499,11 +516,14 @@ static void acm_write_bulk(struct urb *urb) static void acm_softint(struct work_struct *work) { struct acm *acm = container_of(work, struct acm, work); + struct tty_struct *tty; dev_vdbg(&acm->data->dev, "tx work\n"); if (!ACM_READY(acm)) return; - tty_wakeup(acm->tty); + tty = tty_port_tty_get(&acm->port); + tty_wakeup(tty); + tty_kref_put(tty); } static void acm_waker(struct work_struct *waker) @@ -543,8 +563,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) rv = 0; set_bit(TTY_NO_WRITE_SPLIT, &tty->flags); + tty->driver_data = acm; - acm->tty = tty; + tty_port_tty_set(&acm->port, tty); if (usb_autopm_get_interface(acm->control) < 0) goto early_bail; @@ -552,11 +573,10 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) acm->control->needs_remote_wakeup = 1; mutex_lock(&acm->mutex); - if (acm->used++) { + if (acm->port.count++) { usb_autopm_put_interface(acm->control); goto done; - } - + } acm->ctrlurb->dev = acm->dev; if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) { @@ -567,22 +587,22 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) && (acm->ctrl_caps & USB_CDC_CAP_LINE)) goto full_bailout; + usb_autopm_put_interface(acm->control); INIT_LIST_HEAD(&acm->spare_read_urbs); INIT_LIST_HEAD(&acm->spare_read_bufs); INIT_LIST_HEAD(&acm->filled_read_bufs); - for (i = 0; i < acm->rx_buflimit; i++) { + + for (i = 0; i < acm->rx_buflimit; i++) list_add(&(acm->ru[i].list), &acm->spare_read_urbs); - } - for (i = 0; i < acm->rx_buflimit; i++) { + for (i = 0; i < acm->rx_buflimit; i++) list_add(&(acm->rb[i].list), &acm->spare_read_bufs); - } acm->throttle = 0; tasklet_schedule(&acm->urb_task); - + rv = tty_port_block_til_ready(&acm->port, tty, filp); done: mutex_unlock(&acm->mutex); err_out: @@ -593,16 +613,17 @@ full_bailout: usb_kill_urb(acm->ctrlurb); bail_out: usb_autopm_put_interface(acm->control); - acm->used--; + acm->port.count--; mutex_unlock(&acm->mutex); early_bail: mutex_unlock(&open_mutex); + tty_port_tty_set(&acm->port, NULL); return -EIO; } static void acm_tty_unregister(struct acm *acm) { - int i,nr; + int i, nr; nr = acm->rx_buflimit; tty_unregister_device(acm_tty_driver, acm->minor); @@ -619,41 +640,56 @@ static void acm_tty_unregister(struct acm *acm) static int acm_tty_chars_in_buffer(struct tty_struct *tty); +static void acm_port_down(struct acm *acm, int drain) +{ + int i, nr = acm->rx_buflimit; + mutex_lock(&open_mutex); + if (acm->dev) { + usb_autopm_get_interface(acm->control); + acm_set_control(acm, acm->ctrlout = 0); + /* try letting the last writes drain naturally */ + if (drain) { + wait_event_interruptible_timeout(acm->drain_wait, + (ACM_NW == acm_wb_is_avail(acm)) || !acm->dev, + ACM_CLOSE_TIMEOUT * HZ); + } + usb_kill_urb(acm->ctrlurb); + for (i = 0; i < ACM_NW; i++) + usb_kill_urb(acm->wb[i].urb); + for (i = 0; i < nr; i++) + usb_kill_urb(acm->ru[i].urb); + acm->control->needs_remote_wakeup = 0; + usb_autopm_put_interface(acm->control); + } + mutex_unlock(&open_mutex); +} + +static void acm_tty_hangup(struct tty_struct *tty) +{ + struct acm *acm = tty->driver_data; + tty_port_hangup(&acm->port); + acm_port_down(acm, 0); +} + static void acm_tty_close(struct tty_struct *tty, struct file *filp) { struct acm *acm = tty->driver_data; - int i,nr; - if (!acm || !acm->used) + /* Perform the closing process and see if we need to do the hardware + shutdown */ + if (tty_port_close_start(&acm->port, tty, filp) == 0) return; - - nr = acm->rx_buflimit; + acm_port_down(acm, 0); + tty_port_close_end(&acm->port, tty); mutex_lock(&open_mutex); - if (!--acm->used) { - if (acm->dev) { - usb_autopm_get_interface(acm->control); - acm_set_control(acm, acm->ctrlout = 0); - - /* try letting the last writes drain naturally */ - wait_event_interruptible_timeout(acm->drain_wait, - (ACM_NW == acm_wb_is_avail(acm)) - || !acm->dev, - ACM_CLOSE_TIMEOUT * HZ); - - usb_kill_urb(acm->ctrlurb); - for (i = 0; i < ACM_NW; i++) - usb_kill_urb(acm->wb[i].urb); - for (i = 0; i < nr; i++) - usb_kill_urb(acm->ru[i].urb); - acm->control->needs_remote_wakeup = 0; - usb_autopm_put_interface(acm->control); - } else - acm_tty_unregister(acm); - } + tty_port_tty_set(&acm->port, NULL); + if (!acm->dev) + acm_tty_unregister(acm); mutex_unlock(&open_mutex); } -static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count) +static int acm_tty_write(struct tty_struct *tty, + const unsigned char *buf, int count) { struct acm *acm = tty->driver_data; int stat; @@ -669,7 +705,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c return 0; spin_lock_irqsave(&acm->write_lock, flags); - if ((wbn = acm_wb_alloc(acm)) < 0) { + wbn = acm_wb_alloc(acm); + if (wbn < 0) { spin_unlock_irqrestore(&acm->write_lock, flags); return 0; } @@ -681,7 +718,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c wb->len = count; spin_unlock_irqrestore(&acm->write_lock, flags); - if ((stat = acm_write_start(acm, wbn)) < 0) + stat = acm_write_start(acm, wbn); + if (stat < 0) return stat; return count; } @@ -767,8 +805,10 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file, return -EINVAL; newctrl = acm->ctrlout; - set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (set & TIOCM_RTS ? ACM_CTRL_RTS : 0); - clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0); + set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | + (set & TIOCM_RTS ? ACM_CTRL_RTS : 0); + clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | + (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0); newctrl = (newctrl & ~clear) | set; @@ -777,7 +817,8 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file, return acm_set_control(acm, acm->ctrlout = newctrl); } -static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) +static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { struct acm *acm = tty->driver_data; @@ -799,7 +840,8 @@ static const __u8 acm_tty_size[] = { 5, 6, 7, 8 }; -static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old) +static void acm_tty_set_termios(struct tty_struct *tty, + struct ktermios *termios_old) { struct acm *acm = tty->driver_data; struct ktermios *termios = tty->termios; @@ -809,19 +851,23 @@ static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios if (!ACM_READY(acm)) return; + /* FIXME: Needs to support the tty_baud interface */ + /* FIXME: Broken on sparc */ newline.dwDTERate = cpu_to_le32p(acm_tty_speed + (termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0)); newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0; newline.bParityType = termios->c_cflag & PARENB ? - (termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; + (termios->c_cflag & PARODD ? 1 : 2) + + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4]; - + /* FIXME: Needs to clear unsupported bits in the termios */ acm->clocal = ((termios->c_cflag & CLOCAL) != 0); if (!newline.dwDTERate) { newline.dwDTERate = acm->line.dwDTERate; newctrl &= ~ACM_CTRL_DTR; - } else newctrl |= ACM_CTRL_DTR; + } else + newctrl |= ACM_CTRL_DTR; if (newctrl != acm->ctrlout) acm_set_control(acm, acm->ctrlout = newctrl); @@ -846,9 +892,8 @@ static void acm_write_buffers_free(struct acm *acm) struct acm_wb *wb; struct usb_device *usb_dev = interface_to_usbdev(acm->control); - for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) { + for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah); - } } static void acm_read_buffers_free(struct acm *acm) @@ -857,7 +902,8 @@ static void acm_read_buffers_free(struct acm *acm) int i, n = acm->rx_buflimit; for (i = 0; i < n; i++) - usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma); + usb_buffer_free(usb_dev, acm->readsize, + acm->rb[i].base, acm->rb[i].dma); } /* Little helper: write buffers allocate */ @@ -882,8 +928,8 @@ static int acm_write_buffers_alloc(struct acm *acm) return 0; } -static int acm_probe (struct usb_interface *intf, - const struct usb_device_id *id) +static int acm_probe(struct usb_interface *intf, + const struct usb_device_id *id) { struct usb_cdc_union_desc *union_header = NULL; struct usb_cdc_country_functional_desc *cfd = NULL; @@ -897,7 +943,7 @@ static int acm_probe (struct usb_interface *intf, struct usb_device *usb_dev = interface_to_usbdev(intf); struct acm *acm; int minor; - int ctrlsize,readsize; + int ctrlsize, readsize; u8 *buf; u8 ac_management_function = 0; u8 call_management_function = 0; @@ -917,7 +963,7 @@ static int acm_probe (struct usb_interface *intf, control_interface = usb_ifnum_to_if(usb_dev, 0); goto skip_normal_probe; } - + /* normal probing*/ if (!buffer) { dev_err(&intf->dev, "Weird descriptor references\n"); @@ -925,8 +971,10 @@ static int acm_probe (struct usb_interface *intf, } if (!buflen) { - if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) { - dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n"); + if (intf->cur_altsetting->endpoint->extralen && + intf->cur_altsetting->endpoint->extra) { + dev_dbg(&intf->dev, + "Seeking extra descriptors on endpoint\n"); buflen = intf->cur_altsetting->endpoint->extralen; buffer = intf->cur_altsetting->endpoint->extra; } else { @@ -937,47 +985,43 @@ static int acm_probe (struct usb_interface *intf, } while (buflen > 0) { - if (buffer [1] != USB_DT_CS_INTERFACE) { + if (buffer[1] != USB_DT_CS_INTERFACE) { dev_err(&intf->dev, "skipping garbage\n"); goto next_desc; } - switch (buffer [2]) { - case USB_CDC_UNION_TYPE: /* we've found it */ - if (union_header) { - dev_err(&intf->dev, "More than one " - "union descriptor, " - "skipping ...\n"); - goto next_desc; - } - union_header = (struct usb_cdc_union_desc *) - buffer; - break; - case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/ - cfd = (struct usb_cdc_country_functional_desc *)buffer; - break; - case USB_CDC_HEADER_TYPE: /* maybe check version */ - break; /* for now we ignore it */ - case USB_CDC_ACM_TYPE: - ac_management_function = buffer[3]; - break; - case USB_CDC_CALL_MANAGEMENT_TYPE: - call_management_function = buffer[3]; - call_interface_num = buffer[4]; - if ((call_management_function & 3) != 3) - dev_err(&intf->dev, "This device " - "cannot do calls on its own. " - "It is no modem.\n"); - break; - default: - /* there are LOTS more CDC descriptors that - * could legitimately be found here. - */ - dev_dbg(&intf->dev, "Ignoring descriptor: " - "type %02x, length %d\n", - buffer[2], buffer[0]); - break; + switch (buffer[2]) { + case USB_CDC_UNION_TYPE: /* we've found it */ + if (union_header) { + dev_err(&intf->dev, "More than one " + "union descriptor, skipping ...\n"); + goto next_desc; } + union_header = (struct usb_cdc_union_desc *)buffer; + break; + case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/ + cfd = (struct usb_cdc_country_functional_desc *)buffer; + break; + case USB_CDC_HEADER_TYPE: /* maybe check version */ + break; /* for now we ignore it */ + case USB_CDC_ACM_TYPE: + ac_management_function = buffer[3]; + break; + case USB_CDC_CALL_MANAGEMENT_TYPE: + call_management_function = buffer[3]; + call_interface_num = buffer[4]; + if ((call_management_function & 3) != 3) + dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n"); + break; + default: + /* there are LOTS more CDC descriptors that + * could legitimately be found here. + */ + dev_dbg(&intf->dev, "Ignoring descriptor: " + "type %02x, length %d\n", + buffer[2], buffer[0]); + break; + } next_desc: buflen -= buffer[0]; buffer += buffer[0]; @@ -985,33 +1029,36 @@ next_desc: if (!union_header) { if (call_interface_num > 0) { - dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n"); + dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n"); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num)); control_interface = intf; } else { - dev_dbg(&intf->dev,"No union descriptor, giving up\n"); + dev_dbg(&intf->dev, + "No union descriptor, giving up\n"); return -ENODEV; } } else { control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0)); if (!control_interface || !data_interface) { - dev_dbg(&intf->dev,"no interfaces\n"); + dev_dbg(&intf->dev, "no interfaces\n"); return -ENODEV; } } - + if (data_interface_num != call_interface_num) - dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n"); + dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n"); skip_normal_probe: /*workaround for switched interfaces */ - if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) { - if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) { + if (data_interface->cur_altsetting->desc.bInterfaceClass + != CDC_DATA_INTERFACE_TYPE) { + if (control_interface->cur_altsetting->desc.bInterfaceClass + == CDC_DATA_INTERFACE_TYPE) { struct usb_interface *t; - dev_dbg(&intf->dev,"Your device has switched interfaces.\n"); - + dev_dbg(&intf->dev, + "Your device has switched interfaces.\n"); t = control_interface; control_interface = data_interface; data_interface = t; @@ -1023,9 +1070,9 @@ skip_normal_probe: /* Accept probe requests only for the control interface */ if (intf != control_interface) return -ENODEV; - + if (usb_interface_claimed(data_interface)) { /* valid in this context */ - dev_dbg(&intf->dev,"The data interface isn't available\n"); + dev_dbg(&intf->dev, "The data interface isn't available\n"); return -EBUSY; } @@ -1042,8 +1089,8 @@ skip_normal_probe: if (!usb_endpoint_dir_in(epread)) { /* descriptors are swapped */ struct usb_endpoint_descriptor *t; - dev_dbg(&intf->dev,"The data interface has switched endpoints\n"); - + dev_dbg(&intf->dev, + "The data interface has switched endpoints\n"); t = epread; epread = epwrite; epwrite = t; @@ -1056,13 +1103,15 @@ skip_normal_probe: return -ENODEV; } - if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) { + acm = kzalloc(sizeof(struct acm), GFP_KERNEL); + if (acm == NULL) { dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n"); goto alloc_fail; } ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize); - readsize = le16_to_cpu(epread->wMaxPacketSize)* ( quirks == SINGLE_RX_URB ? 1 : 2); + readsize = le16_to_cpu(epread->wMaxPacketSize) * + (quirks == SINGLE_RX_URB ? 1 : 2); acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20; acm->control = control_interface; acm->data = data_interface; @@ -1082,6 +1131,8 @@ skip_normal_probe: spin_lock_init(&acm->read_lock); mutex_init(&acm->mutex); acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress); + tty_port_init(&acm->port); + acm->port.ops = &acm_port_ops; buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) { @@ -1103,8 +1154,10 @@ skip_normal_probe: for (i = 0; i < num_rx_buf; i++) { struct acm_ru *rcv = &(acm->ru[i]); - if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n"); + rcv->urb = usb_alloc_urb(0, GFP_KERNEL); + if (rcv->urb == NULL) { + dev_dbg(&intf->dev, + "out of memory (read urbs usb_alloc_urb)\n"); goto alloc_fail7; } @@ -1117,26 +1170,29 @@ skip_normal_probe: rb->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &rb->dma); if (!rb->base) { - dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n"); + dev_dbg(&intf->dev, + "out of memory (read bufs usb_buffer_alloc)\n"); goto alloc_fail7; } } - for(i = 0; i < ACM_NW; i++) - { + for (i = 0; i < ACM_NW; i++) { struct acm_wb *snd = &(acm->wb[i]); - if (!(snd->urb = usb_alloc_urb(0, GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (write urbs usb_alloc_urb)"); + snd->urb = usb_alloc_urb(0, GFP_KERNEL); + if (snd->urb == NULL) { + dev_dbg(&intf->dev, + "out of memory (write urbs usb_alloc_urb)"); goto alloc_fail7; } - usb_fill_bulk_urb(snd->urb, usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), - NULL, acm->writesize, acm_write_bulk, snd); + usb_fill_bulk_urb(snd->urb, usb_dev, + usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), + NULL, acm->writesize, acm_write_bulk, snd); snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; snd->instance = acm; } - usb_set_intfdata (intf, acm); + usb_set_intfdata(intf, acm); i = device_create_file(&intf->dev, &dev_attr_bmCapabilities); if (i < 0) @@ -1147,7 +1203,8 @@ skip_normal_probe: if (!acm->country_codes) goto skip_countries; acm->country_code_size = cfd->bLength - 4; - memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, cfd->bLength - 4); + memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, + cfd->bLength - 4); acm->country_rel_date = cfd->iCountryCodeRelDate; i = device_create_file(&intf->dev, &dev_attr_wCountryCodes); @@ -1156,7 +1213,8 @@ skip_normal_probe: goto skip_countries; } - i = device_create_file(&intf->dev, &dev_attr_iCountryCodeRelDate); + i = device_create_file(&intf->dev, + &dev_attr_iCountryCodeRelDate); if (i < 0) { kfree(acm->country_codes); goto skip_countries; @@ -1164,8 +1222,10 @@ skip_normal_probe: } skip_countries: - usb_fill_int_urb(acm->ctrlurb, usb_dev, usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress), - acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval); + usb_fill_int_urb(acm->ctrlurb, usb_dev, + usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress), + acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, + epctrl->bInterval); acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; acm->ctrlurb->transfer_dma = acm->ctrl_dma; @@ -1212,7 +1272,7 @@ static void stop_data_traffic(struct acm *acm) tasklet_disable(&acm->urb_task); usb_kill_urb(acm->ctrlurb); - for(i = 0; i < ACM_NW; i++) + for (i = 0; i < ACM_NW; i++) usb_kill_urb(acm->wb[i].urb); for (i = 0; i < acm->rx_buflimit; i++) usb_kill_urb(acm->ru[i].urb); @@ -1227,13 +1287,14 @@ static void acm_disconnect(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata(intf); struct usb_device *usb_dev = interface_to_usbdev(intf); + struct tty_struct *tty; /* sibling interface is already cleaning up */ if (!acm) return; mutex_lock(&open_mutex); - if (acm->country_codes){ + if (acm->country_codes) { device_remove_file(&acm->control->dev, &dev_attr_wCountryCodes); device_remove_file(&acm->control->dev, @@ -1247,22 +1308,25 @@ static void acm_disconnect(struct usb_interface *intf) stop_data_traffic(acm); acm_write_buffers_free(acm); - usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); + usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, + acm->ctrl_dma); acm_read_buffers_free(acm); usb_driver_release_interface(&acm_driver, intf == acm->control ? acm->data : acm->control); - if (!acm->used) { + if (acm->port.count == 0) { acm_tty_unregister(acm); mutex_unlock(&open_mutex); return; } mutex_unlock(&open_mutex); - - if (acm->tty) - tty_hangup(acm->tty); + tty = tty_port_tty_get(&acm->port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } } #ifdef CONFIG_PM @@ -1297,7 +1361,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) */ mutex_lock(&acm->mutex); - if (acm->used) + if (acm->port.count) stop_data_traffic(acm); mutex_unlock(&acm->mutex); @@ -1319,7 +1383,7 @@ static int acm_resume(struct usb_interface *intf) return 0; mutex_lock(&acm->mutex); - if (acm->used) { + if (acm->port.count) { rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO); if (rv < 0) goto err_out; @@ -1375,6 +1439,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ @@ -1395,7 +1462,7 @@ static struct usb_device_id acm_ids[] = { { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_GSM) }, { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, - USB_CDC_ACM_PROTO_AT_3G ) }, + USB_CDC_ACM_PROTO_AT_3G) }, { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_CDMA) }, @@ -1403,7 +1470,7 @@ static struct usb_device_id acm_ids[] = { { } }; -MODULE_DEVICE_TABLE (usb, acm_ids); +MODULE_DEVICE_TABLE(usb, acm_ids); static struct usb_driver acm_driver = { .name = "cdc_acm", @@ -1426,6 +1493,7 @@ static struct usb_driver acm_driver = { static const struct tty_operations acm_ops = { .open = acm_tty_open, .close = acm_tty_close, + .hangup = acm_tty_hangup, .write = acm_tty_write, .write_room = acm_tty_write_room, .ioctl = acm_tty_ioctl, @@ -1457,7 +1525,8 @@ static int __init acm_init(void) acm_tty_driver->subtype = SERIAL_TYPE_NORMAL, acm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; acm_tty_driver->init_termios = tty_std_termios; - acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | + HUPCL | CLOCAL; tty_set_operations(acm_tty_driver, &acm_ops); retval = tty_register_driver(acm_tty_driver); @@ -1489,7 +1558,7 @@ static void __exit acm_exit(void) module_init(acm_init); module_exit(acm_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR); diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 1f95e7aa1b6..4c3856420ad 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -89,8 +89,8 @@ struct acm { struct usb_device *dev; /* the corresponding usb device */ struct usb_interface *control; /* control interface */ struct usb_interface *data; /* data interface */ - struct tty_struct *tty; /* the corresponding tty */ - struct urb *ctrlurb; /* urbs */ + struct tty_port port; /* our tty port data */ + struct urb *ctrlurb; /* urbs */ u8 *ctrl_buffer; /* buffers of urbs */ dma_addr_t ctrl_dma; /* dma handles of buffers */ u8 *country_codes; /* country codes from device */ @@ -120,7 +120,6 @@ struct acm { unsigned int ctrlout; /* output control lines (DTR, RTS) */ unsigned int writesize; /* max packet size for the output bulk endpoint */ unsigned int readsize,ctrlsize; /* buffer sizes for freeing */ - unsigned int used; /* someone has this acm's device open */ unsigned int minor; /* acm minor number */ unsigned char throttle; /* throttled by tty layer */ unsigned char clocal; /* termios CLOCAL */ diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index dff5760a37f..ffe75e83787 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -39,6 +39,7 @@ #include <linux/parser.h> #include <linux/notifier.h> #include <linux/seq_file.h> +#include <linux/smp_lock.h> #include <asm/byteorder.h> #include "usb.h" #include "hcd.h" @@ -265,9 +266,13 @@ static int remount(struct super_block *sb, int *flags, char *data) return -EINVAL; } + lock_kernel(); + if (usbfs_mount && usbfs_mount->mnt_sb) update_sb(usbfs_mount->mnt_sb); + unlock_kernel(); + return 0; } diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 563d5727544..05c913cc365 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -794,7 +794,8 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) if (ep->desc) { list_add_tail(&req->queue, &ep->queue); - if (ep->is_in || (ep_is_control(ep) + if ((!ep_is_control(ep) && ep->is_in) || + (ep_is_control(ep) && (ep->state == DATA_STAGE_IN || ep->state == STATUS_STAGE_IN))) usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); @@ -1940,7 +1941,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) usba_writel(udc, CTRL, USBA_DISABLE_MASK); clk_disable(pclk); - usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep, + usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep, GFP_KERNEL); if (!usba_ep) goto err_alloc_ep; diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index cd07ea3f0c6..15438469f21 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1658,6 +1658,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, u32 reg_base, or_reg, skip_reg; unsigned long flags; struct ptd ptd; + packet_enqueue *pe; switch (usb_pipetype(urb->pipe)) { case PIPE_ISOCHRONOUS: @@ -1669,6 +1670,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, reg_base = INT_REGS_OFFSET; or_reg = HC_INT_IRQ_MASK_OR_REG; skip_reg = HC_INT_PTD_SKIPMAP_REG; + pe = enqueue_an_INT_packet; break; default: @@ -1676,6 +1678,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, reg_base = ATL_REGS_OFFSET; or_reg = HC_ATL_IRQ_MASK_OR_REG; skip_reg = HC_ATL_PTD_SKIPMAP_REG; + pe = enqueue_an_ATL_packet; break; } @@ -1687,6 +1690,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, u32 skip_map; u32 or_map; struct isp1760_qtd *qtd; + struct isp1760_qh *qh = ints->qh; skip_map = isp1760_readl(hcd->regs + skip_reg); skip_map |= 1 << i; @@ -1699,8 +1703,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base + i * sizeof(ptd), sizeof(ptd)); qtd = ints->qtd; - - clean_up_qtdlist(qtd); + qtd = clean_up_qtdlist(qtd); free_mem(priv, ints->payload); @@ -1711,7 +1714,24 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, ints->payload = 0; isp1760_urb_done(priv, urb, status); + if (qtd) + pe(hcd, qh, qtd); break; + + } else if (ints->qtd) { + struct isp1760_qtd *qtd, *prev_qtd = ints->qtd; + + for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) { + if (qtd->urb == urb) { + prev_qtd->hw_next = clean_up_qtdlist(qtd); + isp1760_urb_done(priv, urb, status); + break; + } + prev_qtd = qtd; + } + /* we found the urb before the end of the list */ + if (qtd) + break; } ints++; } diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index b7eacad4d48..2bfd6dd85b5 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -93,8 +93,7 @@ static int belkin_sa_startup(struct usb_serial *serial); static void belkin_sa_shutdown(struct usb_serial *serial); static int belkin_sa_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void belkin_sa_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void belkin_sa_close(struct usb_serial_port *port); static void belkin_sa_read_int_callback(struct urb *urb); static void belkin_sa_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old); @@ -244,8 +243,7 @@ exit: } /* belkin_sa_open */ -static void belkin_sa_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void belkin_sa_close(struct usb_serial_port *port) { dbg("%s port %d", __func__, port->number); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index ab4cc277aa6..2830766f5b3 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -262,32 +262,40 @@ error: kfree(priv); return r; } -static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int ch341_carrier_raised(struct usb_serial_port *port) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & CH341_BIT_DCD) + return 1; + return 0; +} + +static void ch341_dtr_rts(struct usb_serial_port *port, int on) { struct ch341_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int c_cflag; dbg("%s - port %d", __func__, port->number); + /* drop DTR and RTS */ + spin_lock_irqsave(&priv->lock, flags); + if (on) + priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR; + else + priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR); + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_handshake(port->serial->dev, priv->line_control); + wake_up_interruptible(&priv->delta_msr_wait); +} + +static void ch341_close(struct usb_serial_port *port) +{ + dbg("%s - port %d", __func__, port->number); /* shutdown our urbs */ dbg("%s - shutting down urbs", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - ch341_set_handshake(port->serial->dev, 0); - } - } - wake_up_interruptible(&priv->delta_msr_wait); } @@ -302,7 +310,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("ch341_open()"); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(serial->dev, priv); if (r) @@ -322,7 +329,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, if (r) { dev_err(&port->dev, "%s - failed submitting interrupt urb," " error %d\n", __func__, r); - ch341_close(tty, port, NULL); + ch341_close(port); return -EPROTO; } @@ -343,9 +350,6 @@ static void ch341_set_termios(struct tty_struct *tty, dbg("ch341_set_termios()"); - if (!tty || !tty->termios) - return; - baud_rate = tty_get_baud_rate(tty); priv->baud_rate = baud_rate; @@ -568,6 +572,8 @@ static struct usb_serial_driver ch341_device = { .usb_driver = &ch341_driver, .num_ports = 1, .open = ch341_open, + .dtr_rts = ch341_dtr_rts, + .carrier_raised = ch341_carrier_raised, .close = ch341_close, .ioctl = ch341_ioctl, .set_termios = ch341_set_termios, diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 19e24045b13..247b61bfb7f 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -169,7 +169,9 @@ static int usb_console_setup(struct console *co, char *options) kfree(tty); } } - + /* So we know not to kill the hardware on a hangup on this + port. We have also bumped the use count by one so it won't go + idle */ port->console = 1; retval = 0; @@ -182,7 +184,7 @@ free_tty: kfree(tty); reset_open_count: port->port.count = 0; -goto out; + goto out; } static void usb_console_write(struct console *co, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index e8d5133ce9c..16a154d3b2f 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -1,5 +1,5 @@ /* - * Silicon Laboratories CP2101/CP2102 USB to RS232 serial adaptor driver + * Silicon Laboratories CP210x USB to RS232 serial adaptor driver * * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk) * @@ -27,44 +27,46 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.08" -#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" +#define DRIVER_VERSION "v0.09" +#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver" /* * Function Prototypes */ -static int cp2101_open(struct tty_struct *, struct usb_serial_port *, +static int cp210x_open(struct tty_struct *, struct usb_serial_port *, struct file *); -static void cp2101_cleanup(struct usb_serial_port *); -static void cp2101_close(struct tty_struct *, struct usb_serial_port *, - struct file*); -static void cp2101_get_termios(struct tty_struct *, +static void cp210x_cleanup(struct usb_serial_port *); +static void cp210x_close(struct usb_serial_port *); +static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *port); -static void cp2101_get_termios_port(struct usb_serial_port *port, +static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp); -static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *, +static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); -static int cp2101_tiocmget(struct tty_struct *, struct file *); -static int cp2101_tiocmset(struct tty_struct *, struct file *, +static int cp210x_tiocmget(struct tty_struct *, struct file *); +static int cp210x_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int); -static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *, +static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, unsigned int, unsigned int); -static void cp2101_break_ctl(struct tty_struct *, int); -static int cp2101_startup(struct usb_serial *); -static void cp2101_shutdown(struct usb_serial *); +static void cp210x_break_ctl(struct tty_struct *, int); +static int cp210x_startup(struct usb_serial *); +static void cp210x_shutdown(struct usb_serial *); static int debug; static struct usb_device_id id_table [] = { { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ + { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ + { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */ { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ + { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */ { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ @@ -85,10 +87,12 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ + { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ @@ -99,7 +103,9 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */ { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */ { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */ + { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ + { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ @@ -108,53 +114,70 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver cp2101_driver = { - .name = "cp2101", +static struct usb_driver cp210x_driver = { + .name = "cp210x", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, .no_dynamic_id = 1, }; -static struct usb_serial_driver cp2101_device = { +static struct usb_serial_driver cp210x_device = { .driver = { .owner = THIS_MODULE, - .name = "cp2101", + .name = "cp210x", }, - .usb_driver = &cp2101_driver, + .usb_driver = &cp210x_driver, .id_table = id_table, .num_ports = 1, - .open = cp2101_open, - .close = cp2101_close, - .break_ctl = cp2101_break_ctl, - .set_termios = cp2101_set_termios, - .tiocmget = cp2101_tiocmget, - .tiocmset = cp2101_tiocmset, - .attach = cp2101_startup, - .shutdown = cp2101_shutdown, + .open = cp210x_open, + .close = cp210x_close, + .break_ctl = cp210x_break_ctl, + .set_termios = cp210x_set_termios, + .tiocmget = cp210x_tiocmget, + .tiocmset = cp210x_tiocmset, + .attach = cp210x_startup, + .shutdown = cp210x_shutdown, }; /* Config request types */ #define REQTYPE_HOST_TO_DEVICE 0x41 #define REQTYPE_DEVICE_TO_HOST 0xc1 -/* Config SET requests. To GET, add 1 to the request number */ -#define CP2101_UART 0x00 /* Enable / Disable */ -#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */ -#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */ -#define CP2101_BREAK 0x05 /* On / Off */ -#define CP2101_CONTROL 0x07 /* Flow control line states */ -#define CP2101_MODEMCTL 0x13 /* Modem controls */ -#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */ - -/* CP2101_UART */ +/* Config request codes */ +#define CP210X_IFC_ENABLE 0x00 +#define CP210X_SET_BAUDDIV 0x01 +#define CP210X_GET_BAUDDIV 0x02 +#define CP210X_SET_LINE_CTL 0x03 +#define CP210X_GET_LINE_CTL 0x04 +#define CP210X_SET_BREAK 0x05 +#define CP210X_IMM_CHAR 0x06 +#define CP210X_SET_MHS 0x07 +#define CP210X_GET_MDMSTS 0x08 +#define CP210X_SET_XON 0x09 +#define CP210X_SET_XOFF 0x0A +#define CP210X_SET_EVENTMASK 0x0B +#define CP210X_GET_EVENTMASK 0x0C +#define CP210X_SET_CHAR 0x0D +#define CP210X_GET_CHARS 0x0E +#define CP210X_GET_PROPS 0x0F +#define CP210X_GET_COMM_STATUS 0x10 +#define CP210X_RESET 0x11 +#define CP210X_PURGE 0x12 +#define CP210X_SET_FLOW 0x13 +#define CP210X_GET_FLOW 0x14 +#define CP210X_EMBED_EVENTS 0x15 +#define CP210X_GET_EVENTSTATE 0x16 +#define CP210X_SET_CHARS 0x19 + +/* CP210X_IFC_ENABLE */ #define UART_ENABLE 0x0001 #define UART_DISABLE 0x0000 -/* CP2101_BAUDRATE */ +/* CP210X_(SET|GET)_BAUDDIV */ #define BAUD_RATE_GEN_FREQ 0x384000 -/* CP2101_BITS */ +/* CP210X_(SET|GET)_LINE_CTL */ #define BITS_DATA_MASK 0X0f00 #define BITS_DATA_5 0X0500 #define BITS_DATA_6 0X0600 @@ -174,11 +197,11 @@ static struct usb_serial_driver cp2101_device = { #define BITS_STOP_1_5 0x0001 #define BITS_STOP_2 0x0002 -/* CP2101_BREAK */ +/* CP210X_SET_BREAK */ #define BREAK_ON 0x0000 #define BREAK_OFF 0x0001 -/* CP2101_CONTROL */ +/* CP210X_(SET_MHS|GET_MDMSTS) */ #define CONTROL_DTR 0x0001 #define CONTROL_RTS 0x0002 #define CONTROL_CTS 0x0010 @@ -189,13 +212,13 @@ static struct usb_serial_driver cp2101_device = { #define CONTROL_WRITE_RTS 0x0200 /* - * cp2101_get_config - * Reads from the CP2101 configuration registers + * cp210x_get_config + * Reads from the CP210x configuration registers * 'size' is specified in bytes. * 'data' is a pointer to a pre-allocated array of integers large * enough to hold 'size' bytes (with 4 bytes to each integer) */ -static int cp2101_get_config(struct usb_serial_port *port, u8 request, +static int cp210x_get_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; @@ -211,9 +234,6 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request, return -ENOMEM; } - /* For get requests, the request number must be incremented */ - request++; - /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), request, REQTYPE_DEVICE_TO_HOST, 0x0000, @@ -236,12 +256,12 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request, } /* - * cp2101_set_config - * Writes to the CP2101 configuration registers + * cp210x_set_config + * Writes to the CP210x configuration registers * Values less than 16 bits wide are sent directly * 'size' is specified in bytes. */ -static int cp2101_set_config(struct usb_serial_port *port, u8 request, +static int cp210x_set_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; @@ -292,21 +312,21 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request, } /* - * cp2101_set_config_single - * Convenience function for calling cp2101_set_config on single data values + * cp210x_set_config_single + * Convenience function for calling cp210x_set_config on single data values * without requiring an integer pointer */ -static inline int cp2101_set_config_single(struct usb_serial_port *port, +static inline int cp210x_set_config_single(struct usb_serial_port *port, u8 request, unsigned int data) { - return cp2101_set_config(port, request, &data, 2); + return cp210x_set_config(port, request, &data, 2); } /* - * cp2101_quantise_baudrate + * cp210x_quantise_baudrate * Quantises the baud rate as per AN205 Table 1 */ -static unsigned int cp2101_quantise_baudrate(unsigned int baud) { +static unsigned int cp210x_quantise_baudrate(unsigned int baud) { if (baud <= 56) baud = 0; else if (baud <= 300) baud = 300; else if (baud <= 600) baud = 600; @@ -343,7 +363,7 @@ static unsigned int cp2101_quantise_baudrate(unsigned int baud) { return baud; } -static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, +static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; @@ -351,7 +371,7 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { + if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", __func__); return -EPROTO; @@ -373,17 +393,17 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, } /* Configure the termios structure */ - cp2101_get_termios(tty, port); + cp210x_get_termios(tty, port); /* Set the DTR and RTS pins low */ - cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data + cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data : port, NULL, TIOCM_DTR | TIOCM_RTS, 0); return 0; } -static void cp2101_cleanup(struct usb_serial_port *port) +static void cp210x_cleanup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; @@ -398,8 +418,7 @@ static void cp2101_cleanup(struct usb_serial_port *port) } } -static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void cp210x_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); @@ -410,23 +429,23 @@ static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port, mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) - cp2101_set_config_single(port, CP2101_UART, UART_DISABLE); + cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); mutex_unlock(&port->serial->disc_mutex); } /* - * cp2101_get_termios + * cp210x_get_termios * Reads the baud rate, data bits, parity, stop bits and flow control mode * from the device, corrects any unsupported values, and configures the * termios structure to reflect the state of the device */ -static void cp2101_get_termios(struct tty_struct *tty, +static void cp210x_get_termios(struct tty_struct *tty, struct usb_serial_port *port) { unsigned int baud; if (tty) { - cp2101_get_termios_port(tty->driver_data, + cp210x_get_termios_port(tty->driver_data, &tty->termios->c_cflag, &baud); tty_encode_baud_rate(tty, baud, baud); } @@ -434,15 +453,15 @@ static void cp2101_get_termios(struct tty_struct *tty, else { unsigned int cflag; cflag = 0; - cp2101_get_termios_port(port, &cflag, &baud); + cp210x_get_termios_port(port, &cflag, &baud); } } /* - * cp2101_get_termios_port - * This is the heart of cp2101_get_termios which always uses a &usb_serial_port. + * cp210x_get_termios_port + * This is the heart of cp210x_get_termios which always uses a &usb_serial_port. */ -static void cp2101_get_termios_port(struct usb_serial_port *port, +static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp) { unsigned int cflag, modem_ctl[4]; @@ -451,17 +470,17 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); + cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); /* Convert to baudrate */ if (baud) - baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); + baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); dbg("%s - baud rate = %d", __func__, baud); *baudp = baud; cflag = *cflagp; - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); cflag &= ~CSIZE; switch (bits & BITS_DATA_MASK) { case BITS_DATA_5: @@ -486,14 +505,14 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown number of data bits, using 8", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -516,20 +535,20 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, disabling parity)", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown parity mode, disabling parity", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -542,7 +561,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_STOP_2: dbg("%s - stop bits = 2", __func__); @@ -552,11 +571,11 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - Unknown number of stop bits, using 1 stop bit", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } - cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); if (modem_ctl[0] & 0x0008) { dbg("%s - flow control = CRTSCTS", __func__); cflag |= CRTSCTS; @@ -568,7 +587,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, *cflagp = cflag; } -static void cp2101_set_termios(struct tty_struct *tty, +static void cp210x_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { unsigned int cflag, old_cflag; @@ -583,13 +602,13 @@ static void cp2101_set_termios(struct tty_struct *tty, tty->termios->c_cflag &= ~CMSPAR; cflag = tty->termios->c_cflag; old_cflag = old_termios->c_cflag; - baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty)); + baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty)); /* If the baud rate is to be updated*/ if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { dbg("%s - Setting baud rate to %d baud", __func__, baud); - if (cp2101_set_config_single(port, CP2101_BAUDRATE, + if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV, ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { dbg("Baud rate requested not supported by device\n"); baud = tty_termios_baud_rate(old_termios); @@ -600,7 +619,7 @@ static void cp2101_set_termios(struct tty_struct *tty, /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { case CS5: @@ -624,19 +643,19 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - data bits = 9", __func__); break;*/ default: - dbg("cp2101 driver does not " + dbg("cp210x driver does not " "support the number of bits requested," " using 8 bit mode\n"); bits |= BITS_DATA_8; break; } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of data bits requested " "not supported by device\n"); } if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & PARODD) { @@ -647,13 +666,13 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - parity = EVEN", __func__); } } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Parity mode not supported " "by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; @@ -662,13 +681,13 @@ static void cp2101_set_termios(struct tty_struct *tty, bits |= BITS_STOP_1; dbg("%s - stop bits = 1", __func__); } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of stop bits requested " "not supported by device\n"); } if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { - cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); @@ -688,19 +707,19 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); - cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); } } -static int cp2101_tiocmset (struct tty_struct *tty, struct file *file, +static int cp210x_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - return cp2101_tiocmset_port(port, file, set, clear); + return cp210x_tiocmset_port(port, file, set, clear); } -static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file, +static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear) { unsigned int control = 0; @@ -726,10 +745,10 @@ static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file, dbg("%s - control = 0x%.4x", __func__, control); - return cp2101_set_config(port, CP2101_CONTROL, &control, 2); + return cp210x_set_config(port, CP210X_SET_MHS, &control, 2); } -static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) +static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; unsigned int control; @@ -737,7 +756,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP2101_CONTROL, &control, 1); + cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1); result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) |((control & CONTROL_RTS) ? TIOCM_RTS : 0) @@ -751,7 +770,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) return result; } -static void cp2101_break_ctl (struct tty_struct *tty, int break_state) +static void cp210x_break_ctl (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; unsigned int state; @@ -763,17 +782,17 @@ static void cp2101_break_ctl (struct tty_struct *tty, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __func__, state == BREAK_OFF ? "off" : "on"); - cp2101_set_config(port, CP2101_BREAK, &state, 2); + cp210x_set_config(port, CP210X_SET_BREAK, &state, 2); } -static int cp2101_startup(struct usb_serial *serial) +static int cp210x_startup(struct usb_serial *serial) { - /* CP2101 buffers behave strangely unless device is reset */ + /* cp210x buffers behave strangely unless device is reset */ usb_reset_device(serial->dev); return 0; } -static void cp2101_shutdown(struct usb_serial *serial) +static void cp210x_shutdown(struct usb_serial *serial) { int i; @@ -781,21 +800,21 @@ static void cp2101_shutdown(struct usb_serial *serial) /* Stop reads and writes on all ports */ for (i = 0; i < serial->num_ports; ++i) - cp2101_cleanup(serial->port[i]); + cp210x_cleanup(serial->port[i]); } -static int __init cp2101_init(void) +static int __init cp210x_init(void) { int retval; - retval = usb_serial_register(&cp2101_device); + retval = usb_serial_register(&cp210x_device); if (retval) return retval; /* Failed to register */ - retval = usb_register(&cp2101_driver); + retval = usb_register(&cp210x_driver); if (retval) { /* Failed to register */ - usb_serial_deregister(&cp2101_device); + usb_serial_deregister(&cp210x_device); return retval; } @@ -805,14 +824,14 @@ static int __init cp2101_init(void) return 0; } -static void __exit cp2101_exit(void) +static void __exit cp210x_exit(void) { - usb_deregister(&cp2101_driver); - usb_serial_deregister(&cp2101_device); + usb_deregister(&cp210x_driver); + usb_serial_deregister(&cp210x_device); } -module_init(cp2101_init); -module_exit(cp2101_exit); +module_init(cp210x_init); +module_exit(cp210x_exit); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index dd501bb63ed..933ba913e66 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -61,8 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial); static void cyberjack_shutdown(struct usb_serial *serial); static int cyberjack_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void cyberjack_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void cyberjack_close(struct usb_serial_port *port); static int cyberjack_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int cyberjack_write_room(struct tty_struct *tty); @@ -185,8 +184,7 @@ static int cyberjack_open(struct tty_struct *tty, return result; } -static void cyberjack_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void cyberjack_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index e568710b263..669f9384853 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -174,8 +174,8 @@ static int cypress_ca42v2_startup(struct usb_serial *serial); static void cypress_shutdown(struct usb_serial *serial); static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void cypress_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void cypress_close(struct usb_serial_port *port); +static void cypress_dtr_rts(struct usb_serial_port *port, int on); static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void cypress_send(struct usb_serial_port *port); @@ -218,6 +218,7 @@ static struct usb_serial_driver cypress_earthmate_device = { .shutdown = cypress_shutdown, .open = cypress_open, .close = cypress_close, + .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .ioctl = cypress_ioctl, @@ -244,6 +245,7 @@ static struct usb_serial_driver cypress_hidcom_device = { .shutdown = cypress_shutdown, .open = cypress_open, .close = cypress_close, + .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .ioctl = cypress_ioctl, @@ -270,6 +272,7 @@ static struct usb_serial_driver cypress_ca42v2_device = { .shutdown = cypress_shutdown, .open = cypress_open, .close = cypress_close, + .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .ioctl = cypress_ioctl, @@ -656,11 +659,7 @@ static int cypress_open(struct tty_struct *tty, priv->rx_flags = 0; spin_unlock_irqrestore(&priv->lock, flags); - /* raise both lines and set termios */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = CONTROL_DTR | CONTROL_RTS; - priv->cmd_ctrl = 1; - spin_unlock_irqrestore(&priv->lock, flags); + /* Set termios */ result = cypress_write(tty, port, NULL, 0); if (result) { @@ -694,76 +693,42 @@ static int cypress_open(struct tty_struct *tty, __func__, result); cypress_set_dead(port); } - + port->port.drain_delay = 256; return result; } /* cypress_open */ +static void cypress_dtr_rts(struct usb_serial_port *port, int on) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + /* drop dtr and rts */ + priv = usb_get_serial_port_data(port); + spin_lock_irq(&priv->lock); + if (on == 0) + priv->line_control = 0; + else + priv->line_control = CONTROL_DTR | CONTROL_RTS; + priv->cmd_ctrl = 1; + spin_unlock_irq(&priv->lock); + cypress_write(NULL, port, NULL, 0); +} -static void cypress_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void cypress_close(struct usb_serial_port *port) { struct cypress_private *priv = usb_get_serial_port_data(port); - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; dbg("%s - port %d", __func__, port->number); - /* wait for data to drain from buffer */ - spin_lock_irq(&priv->lock); - timeout = CYPRESS_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (cypress_buf_data_avail(priv->buf) == 0 - || timeout == 0 || signal_pending(current) - /* without mutex, allowed due to harmless failure mode */ - || port->serial->disconnected) - break; - spin_unlock_irq(&priv->lock); - timeout = schedule_timeout(timeout); - spin_lock_irq(&priv->lock); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); - /* clear out any remaining data in the buffer */ - cypress_buf_clear(priv->buf); - spin_unlock_irq(&priv->lock); - /* writing is potentially harmful, lock must be taken */ mutex_lock(&port->serial->disc_mutex); if (port->serial->disconnected) { mutex_unlock(&port->serial->disc_mutex); return; } - /* wait for characters to drain from device */ - if (tty) { - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ * 2560) / bps, HZ / 10); - else - timeout = 2 * HZ; - schedule_timeout_interruptible(timeout); - } - + cypress_buf_clear(priv->buf); dbg("%s - stopping urbs", __func__); usb_kill_urb(port->interrupt_in_urb); usb_kill_urb(port->interrupt_out_urb); - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop dtr and rts */ - priv = usb_get_serial_port_data(port); - spin_lock_irq(&priv->lock); - priv->line_control = 0; - priv->cmd_ctrl = 1; - spin_unlock_irq(&priv->lock); - cypress_write(tty, port, NULL, 0); - } - } if (stats) dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n", diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 38ba4ea8b6b..30f5140eff0 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -422,7 +422,6 @@ struct digi_port { int dp_throttled; int dp_throttle_restart; wait_queue_head_t dp_flush_wait; - int dp_in_close; /* close in progress */ wait_queue_head_t dp_close_wait; /* wait queue for close */ struct work_struct dp_wakeup_work; struct usb_serial_port *dp_port; @@ -456,8 +455,9 @@ static int digi_write_room(struct tty_struct *tty); static int digi_chars_in_buffer(struct tty_struct *tty); static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void digi_close(struct usb_serial_port *port); +static int digi_carrier_raised(struct usb_serial_port *port); +static void digi_dtr_rts(struct usb_serial_port *port, int on); static int digi_startup_device(struct usb_serial *serial); static int digi_startup(struct usb_serial *serial); static void digi_shutdown(struct usb_serial *serial); @@ -510,6 +510,8 @@ static struct usb_serial_driver digi_acceleport_2_device = { .num_ports = 3, .open = digi_open, .close = digi_close, + .dtr_rts = digi_dtr_rts, + .carrier_raised = digi_carrier_raised, .write = digi_write, .write_room = digi_write_room, .write_bulk_callback = digi_write_bulk_callback, @@ -1328,6 +1330,19 @@ static int digi_chars_in_buffer(struct tty_struct *tty) } +static void digi_dtr_rts(struct usb_serial_port *port, int on) +{ + /* Adjust DTR and RTS */ + digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1); +} + +static int digi_carrier_raised(struct usb_serial_port *port) +{ + struct digi_port *priv = usb_get_serial_port_data(port); + if (priv->dp_modem_signals & TIOCM_CD) + return 1; + return 0; +} static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) @@ -1336,7 +1351,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, unsigned char buf[32]; struct digi_port *priv = usb_get_serial_port_data(port); struct ktermios not_termios; - unsigned long flags = 0; dbg("digi_open: TOP: port=%d, open_count=%d", priv->dp_port_num, port->port.count); @@ -1345,26 +1359,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, if (digi_startup_device(port->serial) != 0) return -ENXIO; - spin_lock_irqsave(&priv->dp_port_lock, flags); - - /* don't wait on a close in progress for non-blocking opens */ - if (priv->dp_in_close && (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) { - spin_unlock_irqrestore(&priv->dp_port_lock, flags); - return -EAGAIN; - } - - /* wait for a close in progress to finish */ - while (priv->dp_in_close) { - cond_wait_interruptible_timeout_irqrestore( - &priv->dp_close_wait, DIGI_RETRY_TIMEOUT, - &priv->dp_port_lock, flags); - if (signal_pending(current)) - return -EINTR; - spin_lock_irqsave(&priv->dp_port_lock, flags); - } - - spin_unlock_irqrestore(&priv->dp_port_lock, flags); - /* read modem signals automatically whenever they change */ buf[0] = DIGI_CMD_READ_INPUT_SIGNALS; buf[1] = priv->dp_port_num; @@ -1387,16 +1381,11 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, not_termios.c_iflag = ~tty->termios->c_iflag; digi_set_termios(tty, port, ¬_termios); } - - /* set DTR and RTS */ - digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1); - return 0; } -static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void digi_close(struct usb_serial_port *port) { DEFINE_WAIT(wait); int ret; @@ -1411,28 +1400,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, if (port->serial->disconnected) goto exit; - /* do cleanup only after final close on this port */ - spin_lock_irq(&priv->dp_port_lock); - priv->dp_in_close = 1; - spin_unlock_irq(&priv->dp_port_lock); - - /* tell line discipline to process only XON/XOFF */ - tty->closing = 1; - - /* wait for output to drain */ - if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) - tty_wait_until_sent(tty, DIGI_CLOSE_TIMEOUT); - - /* flush driver and line discipline buffers */ - tty_driver_flush_buffer(tty); - tty_ldisc_flush(tty); - if (port->serial->dev) { - /* wait for transmit idle */ - if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) - digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); - /* drop DTR and RTS */ - digi_set_modem_signals(port, 0, 0); + /* FIXME: Transmit idle belongs in the wait_unti_sent path */ + digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); /* disable input flow control */ buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; @@ -1477,11 +1447,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, /* shutdown any outstanding bulk writes */ usb_kill_urb(port->write_urb); } - tty->closing = 0; exit: spin_lock_irq(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; - priv->dp_in_close = 0; wake_up_interruptible(&priv->dp_close_wait); spin_unlock_irq(&priv->dp_port_lock); mutex_unlock(&port->serial->disc_mutex); @@ -1560,7 +1528,6 @@ static int digi_startup(struct usb_serial *serial) priv->dp_throttled = 0; priv->dp_throttle_restart = 0; init_waitqueue_head(&priv->dp_flush_wait); - priv->dp_in_close = 0; init_waitqueue_head(&priv->dp_close_wait); INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock); priv->dp_port = serial->port[i]; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index c709ec474a8..2b141ccb0cd 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -81,8 +81,7 @@ static int debug; /* function prototypes for an empeg-car player */ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void empeg_close(struct usb_serial_port *port); static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -181,8 +180,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, } -static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void empeg_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d9fcdaedf38..683304d6061 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -89,6 +89,7 @@ struct ftdi_private { int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ + unsigned int latency; /* latency setting in use */ spinlock_t tx_lock; /* spinlock for transmit state */ unsigned long tx_bytes; unsigned long tx_outstanding_bytes; @@ -719,8 +720,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port); static int ftdi_sio_port_remove(struct usb_serial_port *port); static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void ftdi_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void ftdi_close(struct usb_serial_port *port); +static void ftdi_dtr_rts(struct usb_serial_port *port, int on); static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int ftdi_write_room(struct tty_struct *tty); @@ -758,6 +759,7 @@ static struct usb_serial_driver ftdi_sio_device = { .port_remove = ftdi_sio_port_remove, .open = ftdi_open, .close = ftdi_close, + .dtr_rts = ftdi_dtr_rts, .throttle = ftdi_throttle, .unthrottle = ftdi_unthrottle, .write = ftdi_write, @@ -1037,7 +1039,54 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) return rv; } +static int write_latency_timer(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + char buf[1]; + int rv = 0; + int l = priv->latency; + + if (priv->flags & ASYNC_LOW_LATENCY) + l = 1; + + dbg("%s: setting latency timer = %i", __func__, l); + + rv = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_LATENCY_TIMER_REQUEST, + FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, + l, priv->interface, + buf, 0, WDR_TIMEOUT); + + if (rv < 0) + dev_err(&port->dev, "Unable to write latency timer: %i\n", rv); + return rv; +} + +static int read_latency_timer(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + unsigned short latency = 0; + int rv = 0; + + dbg("%s", __func__); + + rv = usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + FTDI_SIO_GET_LATENCY_TIMER_REQUEST, + FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, + 0, priv->interface, + (char *) &latency, 1, WDR_TIMEOUT); + + if (rv < 0) { + dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); + return -EIO; + } + return latency; +} static int get_serial_info(struct usb_serial_port *port, struct serial_struct __user *retinfo) @@ -1097,6 +1146,7 @@ static int set_serial_info(struct tty_struct *tty, priv->custom_divisor = new_serial.custom_divisor; tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + write_latency_timer(port); check_and_exit: if ((old_priv.flags & ASYNC_SPD_MASK) != @@ -1192,27 +1242,13 @@ static ssize_t show_latency_timer(struct device *dev, { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); - struct usb_device *udev = port->serial->dev; - unsigned short latency = 0; - int rv = 0; - - - dbg("%s", __func__); - - rv = usb_control_msg(udev, - usb_rcvctrlpipe(udev, 0), - FTDI_SIO_GET_LATENCY_TIMER_REQUEST, - FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, - 0, priv->interface, - (char *) &latency, 1, WDR_TIMEOUT); - - if (rv < 0) { - dev_err(dev, "Unable to read latency timer: %i\n", rv); - return -EIO; - } - return sprintf(buf, "%i\n", latency); + if (priv->flags & ASYNC_LOW_LATENCY) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "%i\n", priv->latency); } + /* Write a new value of the latency timer, in units of milliseconds. */ static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf, @@ -1220,25 +1256,13 @@ static ssize_t store_latency_timer(struct device *dev, { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); - struct usb_device *udev = port->serial->dev; - char buf[1]; int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - dbg("%s: setting latency timer = %i", __func__, v); - - rv = usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - FTDI_SIO_SET_LATENCY_TIMER_REQUEST, - FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, - v, priv->interface, - buf, 0, WDR_TIMEOUT); - - if (rv < 0) { - dev_err(dev, "Unable to write latency timer: %i\n", rv); + priv->latency = v; + rv = write_latency_timer(port); + if (rv < 0) return -EIO; - } - return count; } @@ -1392,6 +1416,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, priv); ftdi_determine_type(port); + read_latency_timer(port); create_sysfs_attrs(port); return 0; } @@ -1514,6 +1539,8 @@ static int ftdi_open(struct tty_struct *tty, if (tty) tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + write_latency_timer(port); + /* No error checking for this (will get errors later anyway) */ /* See ftdi_sio.h for description of what is reset */ usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -1529,11 +1556,6 @@ static int ftdi_open(struct tty_struct *tty, if (tty) ftdi_set_termios(tty, port, tty->termios); - /* FIXME: Flow control might be enabled, so it should be checked - - we have no control of defaults! */ - /* Turn on RTS and DTR since we are not flow controlling by default */ - set_mctrl(port, TIOCM_DTR | TIOCM_RTS); - /* Not throttled */ spin_lock_irqsave(&priv->rx_lock, flags); priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED); @@ -1558,6 +1580,30 @@ static int ftdi_open(struct tty_struct *tty, } /* ftdi_open */ +static void ftdi_dtr_rts(struct usb_serial_port *port, int on) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + char buf[1]; + + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) { + /* Disable flow control */ + if (!on && usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0, priv->interface, buf, 0, + WDR_TIMEOUT) < 0) { + dev_err(&port->dev, "error from flowcontrol urb\n"); + } + /* drop RTS and DTR */ + if (on) + set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + else + clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + } + mutex_unlock(&port->serial->disc_mutex); +} /* * usbserial:__serial_close only calls ftdi_close if the point is open @@ -1567,31 +1613,12 @@ static int ftdi_open(struct tty_struct *tty, * */ -static void ftdi_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void ftdi_close(struct usb_serial_port *port) { /* ftdi_close */ - unsigned int c_cflag = tty->termios->c_cflag; struct ftdi_private *priv = usb_get_serial_port_data(port); - char buf[1]; dbg("%s", __func__); - mutex_lock(&port->serial->disc_mutex); - if (c_cflag & HUPCL && !port->serial->disconnected) { - /* Disable flow control */ - if (usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, - FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, buf, 0, - WDR_TIMEOUT) < 0) { - dev_err(&port->dev, "error from flowcontrol urb\n"); - } - - /* drop RTS and DTR */ - clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); - } /* Note change no line if hupcl is off */ - mutex_unlock(&port->serial->disc_mutex); /* cancel any scheduled reading */ cancel_delayed_work_sync(&priv->rx_work); diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 586d30ff450..ee25a3fe3b0 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -993,8 +993,7 @@ static int garmin_open(struct tty_struct *tty, } -static void garmin_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void garmin_close(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 4cec9906ccf..be82ea95672 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -184,8 +184,7 @@ int usb_serial_generic_resume(struct usb_serial *serial) } EXPORT_SYMBOL_GPL(usb_serial_generic_resume); -void usb_serial_generic_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +void usb_serial_generic_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); generic_cleanup(port); diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index fb4a73d090f..53ef5996e33 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -207,8 +207,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb); /* function prototypes for the usbserial callbacks */ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void edge_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void edge_close(struct usb_serial_port *port); static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int edge_write_room(struct tty_struct *tty); @@ -965,7 +964,7 @@ static int edge_open(struct tty_struct *tty, if (!edge_port->txfifo.fifo) { dbg("%s - no memory", __func__); - edge_close(tty, port, filp); + edge_close(port); return -ENOMEM; } @@ -975,7 +974,7 @@ static int edge_open(struct tty_struct *tty, if (!edge_port->write_urb) { dbg("%s - no memory", __func__); - edge_close(tty, port, filp); + edge_close(port); return -ENOMEM; } @@ -1099,8 +1098,7 @@ static void block_until_tx_empty(struct edgeport_port *edge_port) * edge_close * this function is called by the tty driver when a port is closed *****************************************************************************/ -static void edge_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void edge_close(struct usb_serial_port *port) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 513b25e044c..eabf20eeb37 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2009,8 +2009,7 @@ release_es_lock: return status; } -static void edge_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void edge_close(struct usb_serial_port *port) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index cd62825a9ac..c610a99fa47 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -76,8 +76,7 @@ static int initial_wait; /* Function prototypes for an ipaq */ static int ipaq_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void ipaq_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void ipaq_close(struct usb_serial_port *port); static int ipaq_calc_num_ports(struct usb_serial *serial); static int ipaq_startup(struct usb_serial *serial); static void ipaq_shutdown(struct usb_serial *serial); @@ -714,8 +713,7 @@ error: } -static void ipaq_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void ipaq_close(struct usb_serial_port *port) { struct ipaq_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index da2a2b46644..29ad038b9c8 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -302,23 +302,17 @@ static int ipw_open(struct tty_struct *tty, return 0; } -static void ipw_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void ipw_dtr_rts(struct usb_serial_port *port, int on) { struct usb_device *dev = port->serial->dev; int result; - if (tty_hung_up_p(filp)) { - dbg("%s: tty_hung_up_p ...", __func__); - return; - } - /*--1: drop the dtr */ dbg("%s:dropping dtr", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_CLRDTR, + on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR, 0, NULL, 0, @@ -332,7 +326,7 @@ static void ipw_close(struct tty_struct *tty, result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_CLRRTS, + on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS, 0, NULL, 0, @@ -340,7 +334,12 @@ static void ipw_close(struct tty_struct *tty, if (result < 0) dev_err(&port->dev, "dropping rts failed (error = %d)\n", result); +} +static void ipw_close(struct usb_serial_port *port) +{ + struct usb_device *dev = port->serial->dev; + int result; /*--3: purge */ dbg("%s:sending purge", __func__); @@ -461,6 +460,7 @@ static struct usb_serial_driver ipw_device = { .num_ports = 1, .open = ipw_open, .close = ipw_close, + .dtr_rts = ipw_dtr_rts, .port_probe = ipw_probe, .port_remove = ipw_disconnect, .write = ipw_write, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 4e2cda93da5..66009b6b763 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -88,8 +88,7 @@ static int xbof = -1; static int ir_startup (struct usb_serial *serial); static int ir_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filep); -static void ir_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filep); +static void ir_close(struct usb_serial_port *port); static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void ir_write_bulk_callback (struct urb *urb); @@ -346,8 +345,7 @@ static int ir_open(struct tty_struct *tty, return result; } -static void ir_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file * filp) +static void ir_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 4473d442b2a..76a3cc327bb 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -40,7 +40,7 @@ static int debug; /* * Version Information */ -#define DRIVER_VERSION "v0.5" +#define DRIVER_VERSION "v0.10" #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" static struct usb_device_id id_table[] = { @@ -70,7 +70,6 @@ static void read_rxcmd_callback(struct urb *urb); struct iuu_private { spinlock_t lock; /* store irq state */ wait_queue_head_t delta_msr_wait; - u8 line_control; u8 line_status; u8 termios_initialized; int tiostatus; /* store IUART SIGNAL for tiocmget call */ @@ -651,32 +650,33 @@ static int iuu_bulk_write(struct usb_serial_port *port) unsigned long flags; int result; int i; + int buf_len; char *buf_ptr = port->write_urb->transfer_buffer; dbg("%s - enter", __func__); + spin_lock_irqsave(&priv->lock, flags); *buf_ptr++ = IUU_UART_ESC; *buf_ptr++ = IUU_UART_TX; *buf_ptr++ = priv->writelen; - memcpy(buf_ptr, priv->writebuf, - priv->writelen); + memcpy(buf_ptr, priv->writebuf, priv->writelen); + buf_len = priv->writelen; + priv->writelen = 0; + spin_unlock_irqrestore(&priv->lock, flags); if (debug == 1) { - for (i = 0; i < priv->writelen; i++) + for (i = 0; i < buf_len; i++) sprintf(priv->dbgbuf + i*2 , "%02X", priv->writebuf[i]); - priv->dbgbuf[priv->writelen+i*2] = 0; + priv->dbgbuf[buf_len+i*2] = 0; dbg("%s - writing %i chars : %s", __func__, - priv->writelen, priv->dbgbuf); + buf_len, priv->dbgbuf); } usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), - port->write_urb->transfer_buffer, priv->writelen + 3, + port->write_urb->transfer_buffer, buf_len + 3, iuu_rxcmd, port); result = usb_submit_urb(port->write_urb, GFP_ATOMIC); - spin_lock_irqsave(&priv->lock, flags); - priv->writelen = 0; - spin_unlock_irqrestore(&priv->lock, flags); usb_serial_port_softint(port); return result; } @@ -770,14 +770,10 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port, return -ENOMEM; spin_lock_irqsave(&priv->lock, flags); - if (priv->writelen > 0) { - /* buffer already filled but not commited */ - spin_unlock_irqrestore(&priv->lock, flags); - return 0; - } + /* fill the buffer */ - memcpy(priv->writebuf, buf, count); - priv->writelen = count; + memcpy(priv->writebuf + priv->writelen, buf, count); + priv->writelen += count; spin_unlock_irqrestore(&priv->lock, flags); return count; @@ -819,7 +815,7 @@ static int iuu_uart_on(struct usb_serial_port *port) buf[0] = IUU_UART_ENABLE; buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF); buf[2] = (u8) (0x00FF & IUU_BAUD_9600); - buf[3] = (u8) (0x0F0 & IUU_TWO_STOP_BITS) | (0x07 & IUU_PARITY_EVEN); + buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN); status = bulk_immediate(port, buf, 4); if (status != IUU_OPERATION_OK) { @@ -946,19 +942,59 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud, return status; } -static int set_control_lines(struct usb_device *dev, u8 value) +static void iuu_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { - return 0; + const u32 supported_mask = CMSPAR|PARENB|PARODD; + + unsigned int cflag = tty->termios->c_cflag; + int status; + u32 actual; + u32 parity; + int csize = CS7; + int baud = 9600; /* Fixed for the moment */ + u32 newval = cflag & supported_mask; + + /* compute the parity parameter */ + parity = 0; + if (cflag & CMSPAR) { /* Using mark space */ + if (cflag & PARODD) + parity |= IUU_PARITY_SPACE; + else + parity |= IUU_PARITY_MARK; + } else if (!(cflag & PARENB)) { + parity |= IUU_PARITY_NONE; + csize = CS8; + } else if (cflag & PARODD) + parity |= IUU_PARITY_ODD; + else + parity |= IUU_PARITY_EVEN; + + parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT); + + /* set it */ + status = iuu_uart_baud(port, + (clockmode == 2) ? 16457 : 9600 * boost / 100, + &actual, parity); + + /* set the termios value to the real one, so the user now what has + * changed. We support few fields so its easies to copy the old hw + * settings back over and then adjust them + */ + if (old_termios) + tty_termios_copy_hw(tty->termios, old_termios); + if (status != 0) /* Set failed - return old bits */ + return; + /* Re-encode speed, parity and csize */ + tty_encode_baud_rate(tty, baud, baud); + tty->termios->c_cflag &= ~(supported_mask|CSIZE); + tty->termios->c_cflag |= newval | csize; } -static void iuu_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void iuu_close(struct usb_serial_port *port) { /* iuu_led (port,255,0,0,0); */ struct usb_serial *serial; - struct iuu_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - unsigned int c_cflag; serial = port->serial; if (!serial) @@ -968,17 +1004,6 @@ static void iuu_close(struct tty_struct *tty, iuu_uart_off(port); if (serial->dev) { - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - priv = usb_get_serial_port_data(port); - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, 0); - } - } /* free writebuf */ /* shutdown our urbs */ dbg("%s - shutting down urbs", __func__); @@ -1154,7 +1179,7 @@ static int iuu_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting read urb," " error %d\n", __func__, result); - iuu_close(tty, port, NULL); + iuu_close(port); return -EPROTO; } else { dbg("%s - rxcmd OK", __func__); @@ -1175,6 +1200,7 @@ static struct usb_serial_driver iuu_device = { .read_bulk_callback = iuu_uart_read_callback, .tiocmget = iuu_tiocmget, .tiocmset = iuu_tiocmset, + .set_termios = iuu_set_termios, .attach = iuu_startup, .shutdown = iuu_shutdown, }; diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 00daa8f7759..f1195a98f31 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1298,8 +1298,16 @@ static inline void stop_urb(struct urb *urb) usb_kill_urb(urb); } -static void keyspan_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void keyspan_dtr_rts(struct usb_serial_port *port, int on) +{ + struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); + + p_priv->rts_state = on; + p_priv->dtr_state = on; + keyspan_send_setup(port, 0); +} + +static void keyspan_close(struct usb_serial_port *port) { int i; struct usb_serial *serial = port->serial; @@ -1336,7 +1344,6 @@ static void keyspan_close(struct tty_struct *tty, stop_urb(p_priv->out_urbs[i]); } } - tty_port_tty_set(&port->port, NULL); } /* download the firmware to a pre-renumeration device */ diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 38b4582e073..0d4569b6076 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -38,9 +38,8 @@ static int keyspan_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void keyspan_close (struct tty_struct *tty, - struct usb_serial_port *port, - struct file *filp); +static void keyspan_close (struct usb_serial_port *port); +static void keyspan_dtr_rts (struct usb_serial_port *port, int on); static int keyspan_startup (struct usb_serial *serial); static void keyspan_shutdown (struct usb_serial *serial); static int keyspan_write_room (struct tty_struct *tty); @@ -562,6 +561,7 @@ static struct usb_serial_driver keyspan_1port_device = { .num_ports = 1, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, .set_termios = keyspan_set_termios, @@ -582,6 +582,7 @@ static struct usb_serial_driver keyspan_2port_device = { .num_ports = 2, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, .set_termios = keyspan_set_termios, @@ -602,6 +603,7 @@ static struct usb_serial_driver keyspan_4port_device = { .num_ports = 4, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, .set_termios = keyspan_set_termios, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index bf1ae247da6..ab769dbea1b 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -651,6 +651,35 @@ static int keyspan_pda_chars_in_buffer(struct tty_struct *tty) } +static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_serial *serial = port->serial; + + if (serial->dev) { + if (on) + keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2)); + else + keyspan_pda_set_modem_info(serial, 0); + } +} + +static int keyspan_pda_carrier_raised(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + unsigned char modembits; + + /* If we can read the modem status and the DCD is low then + carrier is not raised yet */ + if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) { + if (!(modembits & (1>>6))) + return 0; + } + /* Carrier raised, or we failed (eg disconnected) so + progress accordingly */ + return 1; +} + + static int keyspan_pda_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { @@ -682,13 +711,6 @@ static int keyspan_pda_open(struct tty_struct *tty, priv->tx_room = room; priv->tx_throttled = room ? 0 : 1; - /* the normal serial device seems to always turn on DTR and RTS here, - so do the same */ - if (tty && (tty->termios->c_cflag & CBAUD)) - keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2)); - else - keyspan_pda_set_modem_info(serial, 0); - /*Start reading from the device*/ port->interrupt_in_urb->dev = serial->dev; rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); @@ -700,19 +722,11 @@ static int keyspan_pda_open(struct tty_struct *tty, error: return rc; } - - -static void keyspan_pda_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void keyspan_pda_close(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; if (serial->dev) { - /* the normal serial device seems to always shut - off DTR and RTS now */ - if (tty->termios->c_cflag & HUPCL) - keyspan_pda_set_modem_info(serial, 0); - /* shutdown our bulk reads and writes */ usb_kill_urb(port->write_urb); usb_kill_urb(port->interrupt_in_urb); @@ -839,6 +853,8 @@ static struct usb_serial_driver keyspan_pda_device = { .usb_driver = &keyspan_pda_driver, .id_table = id_table_std, .num_ports = 1, + .dtr_rts = keyspan_pda_dtr_rts, + .carrier_raised = keyspan_pda_carrier_raised, .open = keyspan_pda_open, .close = keyspan_pda_close, .write = keyspan_pda_write, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index fcd9082f3e7..fa817c66b3e 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -76,8 +76,7 @@ static int klsi_105_startup(struct usb_serial *serial); static void klsi_105_shutdown(struct usb_serial *serial); static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void klsi_105_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void klsi_105_close(struct usb_serial_port *port); static int klsi_105_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void klsi_105_write_bulk_callback(struct urb *urb); @@ -447,8 +446,7 @@ exit: } /* klsi_105_open */ -static void klsi_105_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void klsi_105_close(struct usb_serial_port *port) { struct klsi_105_private *priv = usb_get_serial_port_data(port); int rc; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index c148544953b..6b570498287 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -72,8 +72,7 @@ static int kobil_startup(struct usb_serial *serial); static void kobil_shutdown(struct usb_serial *serial); static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void kobil_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void kobil_close(struct usb_serial_port *port); static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int kobil_write_room(struct tty_struct *tty); @@ -209,7 +208,7 @@ static void kobil_shutdown(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { while (serial->port[i]->port.count > 0) - kobil_close(NULL, serial->port[i], NULL); + kobil_close(serial->port[i]); kfree(usb_get_serial_port_data(serial->port[i])); usb_set_serial_port_data(serial->port[i], NULL); } @@ -346,11 +345,11 @@ static int kobil_open(struct tty_struct *tty, } -static void kobil_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void kobil_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); + /* FIXME: Add rts/dtr methods */ if (port->write_urb) { usb_kill_urb(port->write_urb); usb_free_urb(port->write_urb); diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 82930a7d509..873795548fc 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -95,8 +95,8 @@ static int mct_u232_startup(struct usb_serial *serial); static void mct_u232_shutdown(struct usb_serial *serial); static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void mct_u232_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void mct_u232_close(struct usb_serial_port *port); +static void mct_u232_dtr_rts(struct usb_serial_port *port, int on); static void mct_u232_read_int_callback(struct urb *urb); static void mct_u232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); @@ -140,6 +140,7 @@ static struct usb_serial_driver mct_u232_device = { .num_ports = 1, .open = mct_u232_open, .close = mct_u232_close, + .dtr_rts = mct_u232_dtr_rts, .throttle = mct_u232_throttle, .unthrottle = mct_u232_unthrottle, .read_int_callback = mct_u232_read_int_callback, @@ -496,29 +497,29 @@ error: return retval; } /* mct_u232_open */ - -static void mct_u232_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) { - unsigned int c_cflag; unsigned int control_state; struct mct_u232_private *priv = usb_get_serial_port_data(port); - dbg("%s port %d", __func__, port->number); - if (tty) { - c_cflag = tty->termios->c_cflag; - mutex_lock(&port->serial->disc_mutex); - if (c_cflag & HUPCL && !port->serial->disconnected) { - /* drop DTR and RTS */ - spin_lock_irq(&priv->lock); + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) { + /* drop DTR and RTS */ + spin_lock_irq(&priv->lock); + if (on) + priv->control_state |= TIOCM_DTR | TIOCM_RTS; + else priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); - control_state = priv->control_state; - spin_unlock_irq(&priv->lock); - mct_u232_set_modem_ctrl(port->serial, control_state); - } - mutex_unlock(&port->serial->disc_mutex); + control_state = priv->control_state; + spin_unlock_irq(&priv->lock); + mct_u232_set_modem_ctrl(port->serial, control_state); } + mutex_unlock(&port->serial->disc_mutex); +} +static void mct_u232_close(struct usb_serial_port *port) +{ + dbg("%s port %d", __func__, port->number); if (port->serial->dev) { /* shutdown our urbs */ diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 24e3b5d4b4d..9e1a013ee7f 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -533,8 +533,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty) return chars; } -static void mos7720_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void mos7720_close(struct usb_serial_port *port) { struct usb_serial *serial; struct moschip_port *mos7720_port; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 84fb1dcd30d..10b78a37214 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1135,54 +1135,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty) } -/************************************************************************ - * - * mos7840_block_until_tx_empty - * - * This function will block the close until one of the following: - * 1. TX count are 0 - * 2. The mos7840 has stopped - * 3. A timeout of 3 seconds without activity has expired - * - ************************************************************************/ -static void mos7840_block_until_tx_empty(struct tty_struct *tty, - struct moschip_port *mos7840_port) -{ - int timeout = HZ / 10; - int wait = 30; - int count; - - while (1) { - - count = mos7840_chars_in_buffer(tty); - - /* Check for Buffer status */ - if (count <= 0) - return; - - /* Block the thread for a while */ - interruptible_sleep_on_timeout(&mos7840_port->wait_chase, - timeout); - - /* No activity.. count down section */ - wait--; - if (wait == 0) { - dbg("%s - TIMEOUT", __func__); - return; - } else { - /* Reset timeout value back to seconds */ - wait = 30; - } - } -} - /***************************************************************************** * mos7840_close * this function is called by the tty driver when a port is closed *****************************************************************************/ -static void mos7840_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void mos7840_close(struct usb_serial_port *port) { struct usb_serial *serial; struct moschip_port *mos7840_port; @@ -1223,10 +1181,6 @@ static void mos7840_close(struct tty_struct *tty, } } - if (serial->dev) - /* flush and block until tx is empty */ - mos7840_block_until_tx_empty(tty, mos7840_port); - /* While closing port, shutdown all bulk read, write * * and interrupt read if they exists */ if (serial->dev) { diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index bcdcbb82270..f5f3751a888 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -98,8 +98,7 @@ static int navman_open(struct tty_struct *tty, return result; } -static void navman_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void navman_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index df653971272..1104617334f 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -66,8 +66,7 @@ static int debug; /* function prototypes */ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void omninet_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void omninet_close(struct usb_serial_port *port); static void omninet_read_bulk_callback(struct urb *urb); static void omninet_write_bulk_callback(struct urb *urb); static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -189,8 +188,7 @@ static int omninet_open(struct tty_struct *tty, return result; } -static void omninet_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void omninet_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index b500ad10b75..c20480aa975 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -173,8 +173,7 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port, return result; } -static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void opticon_close(struct usb_serial_port *port) { struct opticon_private *priv = usb_get_serial_data(port->serial); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7817b82889c..a16d69fadba 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -45,8 +45,9 @@ /* Function prototypes */ static int option_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void option_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void option_close(struct usb_serial_port *port); +static void option_dtr_rts(struct usb_serial_port *port, int on); + static int option_startup(struct usb_serial *serial); static void option_shutdown(struct usb_serial *serial); static int option_write_room(struct tty_struct *tty); @@ -61,7 +62,7 @@ static void option_set_termios(struct tty_struct *tty, static int option_tiocmget(struct tty_struct *tty, struct file *file); static int option_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); -static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *port); +static int option_send_setup(struct usb_serial_port *port); static int option_suspend(struct usb_serial *serial, pm_message_t message); static int option_resume(struct usb_serial *serial); @@ -551,6 +552,7 @@ static struct usb_serial_driver option_1port_device = { .num_ports = 1, .open = option_open, .close = option_close, + .dtr_rts = option_dtr_rts, .write = option_write, .write_room = option_write_room, .chars_in_buffer = option_chars_in_buffer, @@ -630,7 +632,7 @@ static void option_set_termios(struct tty_struct *tty, dbg("%s", __func__); /* Doesn't support option setting */ tty_termios_copy_hw(tty->termios, old_termios); - option_send_setup(tty, port); + option_send_setup(port); } static int option_tiocmget(struct tty_struct *tty, struct file *file) @@ -669,7 +671,7 @@ static int option_tiocmset(struct tty_struct *tty, struct file *file, portdata->rts_state = 0; if (clear & TIOCM_DTR) portdata->dtr_state = 0; - return option_send_setup(tty, port); + return option_send_setup(port); } /* Write */ @@ -897,10 +899,6 @@ static int option_open(struct tty_struct *tty, dbg("%s", __func__); - /* Set some sane defaults */ - portdata->rts_state = 1; - portdata->dtr_state = 1; - /* Reset low level data toggle and start reading from endpoints */ for (i = 0; i < N_IN_URB; i++) { urb = portdata->in_urbs[i]; @@ -936,37 +934,43 @@ static int option_open(struct tty_struct *tty, usb_pipeout(urb->pipe), 0); */ } - option_send_setup(tty, port); + option_send_setup(port); return 0; } -static void option_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void option_dtr_rts(struct usb_serial_port *port, int on) { - int i; struct usb_serial *serial = port->serial; struct option_port_private *portdata; dbg("%s", __func__); portdata = usb_get_serial_port_data(port); + mutex_lock(&serial->disc_mutex); + portdata->rts_state = on; + portdata->dtr_state = on; + if (serial->dev) + option_send_setup(port); + mutex_unlock(&serial->disc_mutex); +} - portdata->rts_state = 0; - portdata->dtr_state = 0; - if (serial->dev) { - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - option_send_setup(tty, port); - mutex_unlock(&serial->disc_mutex); +static void option_close(struct usb_serial_port *port) +{ + int i; + struct usb_serial *serial = port->serial; + struct option_port_private *portdata; + + dbg("%s", __func__); + portdata = usb_get_serial_port_data(port); + if (serial->dev) { /* Stop reading/writing urbs */ for (i = 0; i < N_IN_URB; i++) usb_kill_urb(portdata->in_urbs[i]); for (i = 0; i < N_OUT_URB; i++) usb_kill_urb(portdata->out_urbs[i]); } - tty_port_tty_set(&port->port, NULL); } /* Helper functions used by option_setup_urbs */ @@ -1032,28 +1036,24 @@ static void option_setup_urbs(struct usb_serial *serial) * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN * CDC. */ -static int option_send_setup(struct tty_struct *tty, - struct usb_serial_port *port) +static int option_send_setup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct option_port_private *portdata; int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber; + int val = 0; dbg("%s", __func__); portdata = usb_get_serial_port_data(port); - if (tty) { - int val = 0; - if (portdata->dtr_state) - val |= 0x01; - if (portdata->rts_state) - val |= 0x02; + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT); - } - return 0; + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT); } static int option_startup(struct usb_serial *serial) diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index ba551f00f16..7de54781fe6 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -143,8 +143,7 @@ struct oti6858_control_pkt { /* function prototypes */ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void oti6858_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void oti6858_close(struct usb_serial_port *port); static void oti6858_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static int oti6858_ioctl(struct tty_struct *tty, struct file *file, @@ -622,67 +621,30 @@ static int oti6858_open(struct tty_struct *tty, if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed" " with error %d\n", __func__, result); - oti6858_close(tty, port, NULL); + oti6858_close(port); return -EPROTO; } /* setup termios */ if (tty) oti6858_set_termios(tty, port, &tmp_termios); - + port->port.drain_delay = 256; /* FIXME: check the FIFO length */ return 0; } -static void oti6858_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void oti6858_close(struct usb_serial_port *port) { struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; - long timeout; - wait_queue_t wait; dbg("%s(port = %d)", __func__, port->number); - /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); - timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */ - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - dbg("%s(): entering wait loop", __func__); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (oti6858_buf_data_avail(priv->buf) == 0 - || timeout == 0 || signal_pending(current) - || port->serial->disconnected) - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); - dbg("%s(): after wait loop", __func__); - /* clear out any remaining data in the buffer */ oti6858_buf_clear(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - /* wait for characters to drain from the device */ - /* (this is long enough for the entire 256 byte */ - /* pl2303 hardware buffer to drain with no flow */ - /* control for data rates of 1200 bps or more, */ - /* for lower rates we should really know how much */ - /* data is in the buffer to compute a delay */ - /* that is not unnecessarily long) */ - /* FIXME - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ*2560)/bps,HZ/10); - else - */ - timeout = 2*HZ; - schedule_timeout_interruptible(timeout); - dbg("%s(): after schedule_timeout_interruptible()", __func__); + dbg("%s(): after buf_clear()", __func__); /* cancel scheduled setup */ cancel_delayed_work(&priv->delayed_setup_work); @@ -694,15 +656,6 @@ static void oti6858_close(struct tty_struct *tty, usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - - /* - if (tty && (tty->termios->c_cflag) & HUPCL) { - // drop DTR and RTS - spin_lock_irqsave(&priv->lock, flags); - priv->pending_setup.control &= ~CONTROL_MASK; - spin_unlock_irqrestore(&priv->lock, flags); - } - */ } static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 751a533a434..e02dc3d643c 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -652,69 +652,41 @@ static void pl2303_set_termios(struct tty_struct *tty, kfree(buf); } -static void pl2303_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void pl2303_dtr_rts(struct usb_serial_port *port, int on) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + /* Change DTR and RTS */ + if (on) + priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + else + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + set_control_lines(port->serial->dev, control); +} + +static void pl2303_close(struct usb_serial_port *port) { struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; dbg("%s - port %d", __func__, port->number); - /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); - timeout = PL2303_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (pl2303_buf_data_avail(priv->buf) == 0 || - timeout == 0 || signal_pending(current) || - port->serial->disconnected) - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); /* clear out any remaining data in the buffer */ pl2303_buf_clear(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - /* wait for characters to drain from the device */ - /* (this is long enough for the entire 256 byte */ - /* pl2303 hardware buffer to drain with no flow */ - /* control for data rates of 1200 bps or more, */ - /* for lower rates we should really know how much */ - /* data is in the buffer to compute a delay */ - /* that is not unnecessarily long) */ - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ*2560)/bps, HZ/10); - else - timeout = 2*HZ; - schedule_timeout_interruptible(timeout); - /* shutdown our urbs */ dbg("%s - shutting down urbs", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, 0); - } - } } static int pl2303_open(struct tty_struct *tty, @@ -748,7 +720,7 @@ static int pl2303_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting read urb," " error %d\n", __func__, result); - pl2303_close(tty, port, NULL); + pl2303_close(port); return -EPROTO; } @@ -758,9 +730,10 @@ static int pl2303_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," " error %d\n", __func__, result); - pl2303_close(tty, port, NULL); + pl2303_close(port); return -EPROTO; } + port->port.drain_delay = 256; return 0; } @@ -821,6 +794,14 @@ static int pl2303_tiocmget(struct tty_struct *tty, struct file *file) return result; } +static int pl2303_carrier_raised(struct usb_serial_port *port) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & UART_DCD) + return 1; + return 0; +} + static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) { struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -1125,6 +1106,8 @@ static struct usb_serial_driver pl2303_device = { .num_ports = 1, .open = pl2303_open, .close = pl2303_close, + .dtr_rts = pl2303_dtr_rts, + .carrier_raised = pl2303_carrier_raised, .write = pl2303_write, .ioctl = pl2303_ioctl, .break_ctl = pl2303_break_ctl, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 913225c6161..17ac34f4d66 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -26,12 +26,10 @@ #include <linux/module.h> #include <linux/usb.h> #include <linux/usb/serial.h> -#include <linux/usb/ch9.h> #define SWIMS_USB_REQUEST_SetPower 0x00 #define SWIMS_USB_REQUEST_SetNmea 0x07 -/* per port private data */ #define N_IN_URB 4 #define N_OUT_URB 4 #define IN_BUFLEN 4096 @@ -39,6 +37,12 @@ static int debug; static int nmea; +/* Used in interface blacklisting */ +struct sierra_iface_info { + const u32 infolen; /* number of interface numbers on blacklist */ + const u8 *ifaceinfo; /* pointer to the array holding the numbers */ +}; + static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) { int result; @@ -85,6 +89,23 @@ static int sierra_calc_num_ports(struct usb_serial *serial) return result; } +static int is_blacklisted(const u8 ifnum, + const struct sierra_iface_info *blacklist) +{ + const u8 *info; + int i; + + if (blacklist) { + info = blacklist->ifaceinfo; + + for (i = 0; i < blacklist->infolen; i++) { + if (info[i] == ifnum) + return 1; + } + } + return 0; +} + static int sierra_calc_interface(struct usb_serial *serial) { int interface; @@ -153,9 +174,25 @@ static int sierra_probe(struct usb_serial *serial, */ usb_set_serial_data(serial, (void *)num_ports); + /* ifnum could have changed - by calling usb_set_interface */ + ifnum = sierra_calc_interface(serial); + + if (is_blacklisted(ifnum, + (struct sierra_iface_info *)id->driver_info)) { + dev_dbg(&serial->dev->dev, + "Ignoring blacklisted interface #%d\n", ifnum); + return -ENODEV; + } + return result; } +static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 }; +static const struct sierra_iface_info direct_ip_interface_blacklist = { + .infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces), + .ifaceinfo = direct_ip_non_serial_ifaces, +}; + static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ @@ -188,9 +225,11 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */ { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ - { USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */ - { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */ - { USB_DEVICE(0x1199, 0x683E) }, /* Sierra Wireless MC8790 */ + /* Sierra Wireless MC8790, MC8791, MC8792 Composite */ + { USB_DEVICE(0x1199, 0x683C) }, + { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8791 Composite */ + /* Sierra Wireless MC8790, MC8791, MC8792 */ + { USB_DEVICE(0x1199, 0x683E) }, { USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */ { USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */ { USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */ @@ -211,6 +250,10 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */ + { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, + { } }; MODULE_DEVICE_TABLE(usb, id_table); @@ -229,7 +272,6 @@ struct sierra_port_private { /* Input endpoints and buffers for this port */ struct urb *in_urbs[N_IN_URB]; - char *in_buffer[N_IN_URB]; /* Settings for the port */ int rts_state; /* Handshaking pins (outputs) */ @@ -240,57 +282,50 @@ struct sierra_port_private { int ri_state; }; -static int sierra_send_setup(struct tty_struct *tty, - struct usb_serial_port *port) +static int sierra_send_setup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; __u16 interface = 0; + int val = 0; dev_dbg(&port->dev, "%s", __func__); portdata = usb_get_serial_port_data(port); - if (tty) { - int val = 0; - if (portdata->dtr_state) - val |= 0x01; - if (portdata->rts_state) - val |= 0x02; - - /* If composite device then properly report interface */ - if (serial->num_ports == 1) { - interface = sierra_calc_interface(serial); - - /* Control message is sent only to interfaces with - * interrupt_in endpoints - */ - if (port->interrupt_in_urb) { - /* send control message */ - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); - } - } - - /* Otherwise the need to do non-composite mapping */ - else { - if (port->bulk_out_endpointAddress == 2) - interface = 0; - else if (port->bulk_out_endpointAddress == 4) - interface = 1; - else if (port->bulk_out_endpointAddress == 5) - interface = 2; + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; + /* If composite device then properly report interface */ + if (serial->num_ports == 1) { + interface = sierra_calc_interface(serial); + /* Control message is sent only to interfaces with + * interrupt_in endpoints + */ + if (port->interrupt_in_urb) { + /* send control message */ return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); - } } + /* Otherwise the need to do non-composite mapping */ + else { + if (port->bulk_out_endpointAddress == 2) + interface = 0; + else if (port->bulk_out_endpointAddress == 4) + interface = 1; + else if (port->bulk_out_endpointAddress == 5) + interface = 2; + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, + NULL, 0, USB_CTRL_SET_TIMEOUT); + } return 0; } @@ -299,7 +334,7 @@ static void sierra_set_termios(struct tty_struct *tty, { dev_dbg(&port->dev, "%s", __func__); tty_termios_copy_hw(tty->termios, old_termios); - sierra_send_setup(tty, port); + sierra_send_setup(port); } static int sierra_tiocmget(struct tty_struct *tty, struct file *file) @@ -338,7 +373,18 @@ static int sierra_tiocmset(struct tty_struct *tty, struct file *file, portdata->rts_state = 0; if (clear & TIOCM_DTR) portdata->dtr_state = 0; - return sierra_send_setup(tty, port); + return sierra_send_setup(port); +} + +static void sierra_release_urb(struct urb *urb) +{ + struct usb_serial_port *port; + if (urb) { + port = urb->context; + dev_dbg(&port->dev, "%s: %p\n", __func__, urb); + kfree(urb->transfer_buffer); + usb_free_urb(urb); + } } static void sierra_outdat_callback(struct urb *urb) @@ -465,7 +511,7 @@ static void sierra_indat_callback(struct urb *urb) " received", __func__); /* Resubmit urb so we continue receiving */ - if (port->port.count && status != -ESHUTDOWN) { + if (port->port.count && status != -ESHUTDOWN && status != -EPERM) { err = usb_submit_urb(urb, GFP_ATOMIC); if (err) dev_err(&port->dev, "resubmit read urb failed." @@ -557,67 +603,99 @@ static int sierra_write_room(struct tty_struct *tty) return 2048; } -static int sierra_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void sierra_stop_rx_urbs(struct usb_serial_port *port) { - struct sierra_port_private *portdata; - struct usb_serial *serial = port->serial; int i; - struct urb *urb; - int result; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); - portdata = usb_get_serial_port_data(port); + for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) + usb_kill_urb(portdata->in_urbs[i]); - dev_dbg(&port->dev, "%s", __func__); + usb_kill_urb(port->interrupt_in_urb); +} - /* Set some sane defaults */ - portdata->rts_state = 1; - portdata->dtr_state = 1; +static int sierra_submit_rx_urbs(struct usb_serial_port *port, gfp_t mem_flags) +{ + int ok_cnt; + int err = -EINVAL; + int i; + struct urb *urb; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); - /* Reset low level data toggle and start reading from endpoints */ - for (i = 0; i < N_IN_URB; i++) { + ok_cnt = 0; + for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { urb = portdata->in_urbs[i]; if (!urb) continue; - if (urb->dev != serial->dev) { - dev_dbg(&port->dev, "%s: dev %p != %p", - __func__, urb->dev, serial->dev); - continue; + err = usb_submit_urb(urb, mem_flags); + if (err) { + dev_err(&port->dev, "%s: submit urb failed: %d\n", + __func__, err); + } else { + ok_cnt++; } + } - /* - * make sure endpoint data toggle is synchronized with the - * device - */ - usb_clear_halt(urb->dev, urb->pipe); - - result = usb_submit_urb(urb, GFP_KERNEL); - if (result) { - dev_err(&port->dev, "submit urb %d failed (%d) %d\n", - i, result, urb->transfer_buffer_length); + if (ok_cnt && port->interrupt_in_urb) { + err = usb_submit_urb(port->interrupt_in_urb, mem_flags); + if (err) { + dev_err(&port->dev, "%s: submit intr urb failed: %d\n", + __func__, err); } } - sierra_send_setup(tty, port); + if (ok_cnt > 0) /* at least one rx urb submitted */ + return 0; + else + return err; +} + +static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint, + int dir, void *ctx, int len, + gfp_t mem_flags, + usb_complete_t callback) +{ + struct urb *urb; + u8 *buf; + + if (endpoint == -1) + return NULL; - /* start up the interrupt endpoint if we have one */ - if (port->interrupt_in_urb) { - result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, "submit irq_in urb failed %d\n", - result); + urb = usb_alloc_urb(0, mem_flags); + if (urb == NULL) { + dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n", + __func__, endpoint); + return NULL; } - return 0; + + buf = kmalloc(len, mem_flags); + if (buf) { + /* Fill URB using supplied data */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + + /* debug */ + dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__, + dir == USB_DIR_IN ? 'i' : 'o', urb, buf); + } else { + dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__, + dir == USB_DIR_IN ? 'i' : 'o', urb, buf); + + sierra_release_urb(urb); + urb = NULL; + } + + return urb; } -static void sierra_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void sierra_close(struct usb_serial_port *port) { int i; struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; - dev_dbg(&port->dev, "%s", __func__); + dev_dbg(&port->dev, "%s\n", __func__); portdata = usb_get_serial_port_data(port); portdata->rts_state = 0; @@ -626,25 +704,83 @@ static void sierra_close(struct tty_struct *tty, if (serial->dev) { mutex_lock(&serial->disc_mutex); if (!serial->disconnected) - sierra_send_setup(tty, port); + sierra_send_setup(port); mutex_unlock(&serial->disc_mutex); - /* Stop reading/writing urbs */ - for (i = 0; i < N_IN_URB; i++) - usb_kill_urb(portdata->in_urbs[i]); + /* Stop reading urbs */ + sierra_stop_rx_urbs(port); + /* .. and release them */ + for (i = 0; i < N_IN_URB; i++) { + sierra_release_urb(portdata->in_urbs[i]); + portdata->in_urbs[i] = NULL; + } } +} - usb_kill_urb(port->interrupt_in_urb); - tty_port_tty_set(&port->port, NULL); +static int sierra_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) +{ + struct sierra_port_private *portdata; + struct usb_serial *serial = port->serial; + int i; + int err; + int endpoint; + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + + dev_dbg(&port->dev, "%s", __func__); + + /* Set some sane defaults */ + portdata->rts_state = 1; + portdata->dtr_state = 1; + + + endpoint = port->bulk_in_endpointAddress; + for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { + urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port, + IN_BUFLEN, GFP_KERNEL, + sierra_indat_callback); + portdata->in_urbs[i] = urb; + } + /* clear halt condition */ + usb_clear_halt(serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN); + + err = sierra_submit_rx_urbs(port, GFP_KERNEL); + if (err) { + /* get rid of everything as in close */ + sierra_close(port); + return err; + } + sierra_send_setup(port); + + return 0; +} + + +static void sierra_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + portdata->rts_state = on; + portdata->dtr_state = on; + + if (serial->dev) { + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + sierra_send_setup(port); + mutex_unlock(&serial->disc_mutex); + } } static int sierra_startup(struct usb_serial *serial) { struct usb_serial_port *port; struct sierra_port_private *portdata; - struct urb *urb; int i; - int j; dev_dbg(&serial->dev->dev, "%s", __func__); @@ -666,34 +802,8 @@ static int sierra_startup(struct usb_serial *serial) return -ENOMEM; } spin_lock_init(&portdata->lock); - for (j = 0; j < N_IN_URB; j++) { - portdata->in_buffer[j] = kmalloc(IN_BUFLEN, GFP_KERNEL); - if (!portdata->in_buffer[j]) { - for (--j; j >= 0; j--) - kfree(portdata->in_buffer[j]); - kfree(portdata); - return -ENOMEM; - } - } - + /* Set the port private data pointer */ usb_set_serial_port_data(port, portdata); - - /* initialize the in urbs */ - for (j = 0; j < N_IN_URB; ++j) { - urb = usb_alloc_urb(0, GFP_KERNEL); - if (urb == NULL) { - dev_dbg(&port->dev, "%s: alloc for in " - "port failed.", __func__); - continue; - } - /* Fill URB using supplied data. */ - usb_fill_bulk_urb(urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - port->bulk_in_endpointAddress), - portdata->in_buffer[j], IN_BUFLEN, - sierra_indat_callback, port); - portdata->in_urbs[j] = urb; - } } return 0; @@ -701,7 +811,7 @@ static int sierra_startup(struct usb_serial *serial) static void sierra_shutdown(struct usb_serial *serial) { - int i, j; + int i; struct usb_serial_port *port; struct sierra_port_private *portdata; @@ -714,12 +824,6 @@ static void sierra_shutdown(struct usb_serial *serial) portdata = usb_get_serial_port_data(port); if (!portdata) continue; - - for (j = 0; j < N_IN_URB; j++) { - usb_kill_urb(portdata->in_urbs[j]); - usb_free_urb(portdata->in_urbs[j]); - kfree(portdata->in_buffer[j]); - } kfree(portdata); usb_set_serial_port_data(port, NULL); } @@ -737,6 +841,7 @@ static struct usb_serial_driver sierra_device = { .probe = sierra_probe, .open = sierra_open, .close = sierra_close, + .dtr_rts = sierra_dtr_rts, .write = sierra_write, .write_room = sierra_write_room, .set_termios = sierra_set_termios, diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 5e7528cc81a..8f7ed8f1399 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -446,66 +446,47 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value, "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret); } +static int spcp8x5_carrier_raised(struct usb_serial_port *port) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & MSR_STATUS_LINE_DCD) + return 1; + return 0; +} + +static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + if (on) + priv->line_control = MCR_CONTROL_LINE_DTR + | MCR_CONTROL_LINE_RTS; + else + priv->line_control &= ~ (MCR_CONTROL_LINE_DTR + | MCR_CONTROL_LINE_RTS); + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); +} + /* close the serial port. We should wait for data sending to device 1st and * then kill all urb. */ -static void spcp8x5_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void spcp8x5_close(struct usb_serial_port *port) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; int result; dbg("%s - port %d", __func__, port->number); - /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); - timeout = SPCP8x5_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (ringbuf_avail_data(priv->buf) == 0 || - timeout == 0 || signal_pending(current)) - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); - /* clear out any remaining data in the buffer */ clear_ringbuf(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - /* wait for characters to drain from the device (this is long enough - * for the entire all byte spcp8x5 hardware buffer to drain with no - * flow control for data rates of 1200 bps or more, for lower rates we - * should really know how much data is in the buffer to compute a delay - * that is not unnecessarily long) */ - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ*2560) / bps, HZ/10); - else - timeout = 2*HZ; - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(timeout); - - /* clear control lines */ - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type); - } - } - /* kill urb */ if (port->write_urb != NULL) { result = usb_unlink_urb(port->write_urb); @@ -665,13 +646,6 @@ static int spcp8x5_open(struct tty_struct *tty, if (ret) return ret; - spin_lock_irqsave(&priv->lock, flags); - if (tty && (tty->termios->c_cflag & CBAUD)) - priv->line_control = MCR_DTR | MCR_RTS; - else - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type); /* Setup termios */ @@ -691,9 +665,10 @@ static int spcp8x5_open(struct tty_struct *tty, port->read_urb->dev = serial->dev; ret = usb_submit_urb(port->read_urb, GFP_KERNEL); if (ret) { - spcp8x5_close(tty, port, NULL); + spcp8x5_close(port); return -EPROTO; } + port->port.drain_delay = 256; return 0; } @@ -1033,6 +1008,8 @@ static struct usb_serial_driver spcp8x5_device = { .num_ports = 1, .open = spcp8x5_open, .close = spcp8x5_close, + .dtr_rts = spcp8x5_dtr_rts, + .carrier_raised = spcp8x5_carrier_raised, .write = spcp8x5_write, .set_termios = spcp8x5_set_termios, .ioctl = spcp8x5_ioctl, diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 69879e43794..8b07ebc6bae 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -152,8 +152,7 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port, return result; } -static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void symbol_close(struct usb_serial_port *port) { struct symbol_private *priv = usb_get_serial_data(port->serial); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 0a64bac306e..42cb04c403b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -100,8 +100,7 @@ static int ti_startup(struct usb_serial *serial); static void ti_shutdown(struct usb_serial *serial); static int ti_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *file); -static void ti_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *file); +static void ti_close(struct usb_serial_port *port); static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count); static int ti_write_room(struct tty_struct *tty); @@ -647,8 +646,7 @@ release_lock: } -static void ti_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *file) +static void ti_close(struct usb_serial_port *port) { struct ti_device *tdev; struct ti_port *tport; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 0a566eea49c..1967a7edc10 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -238,9 +238,11 @@ static int serial_open (struct tty_struct *tty, struct file *filp) goto bailout_interface_put; mutex_unlock(&serial->disc_mutex); } - mutex_unlock(&port->mutex); - return 0; + /* Now do the correct tty layer semantics */ + retval = tty_port_block_til_ready(&port->port, tty, filp); + if (retval == 0) + return 0; bailout_interface_put: usb_autopm_put_interface(serial->interface); @@ -259,64 +261,89 @@ bailout_serial_put: return retval; } -static void serial_close(struct tty_struct *tty, struct file *filp) +/** + * serial_do_down - shut down hardware + * @port: port to shut down + * + * Shut down a USB port unless it is the console. We never shut down the + * console hardware as it will always be in use. + * + * Don't free any resources at this point + */ +static void serial_do_down(struct usb_serial_port *port) { - struct usb_serial_port *port = tty->driver_data; + struct usb_serial_driver *drv = port->serial->type; struct usb_serial *serial; struct module *owner; - int count; - if (!port) + /* The console is magical, do not hang up the console hardware + or there will be tears */ + if (port->console) return; - dbg("%s - port %d", __func__, port->number); - mutex_lock(&port->mutex); serial = port->serial; owner = serial->type->driver.owner; - if (port->port.count == 0) { - mutex_unlock(&port->mutex); - return; - } - - if (port->port.count == 1) - /* only call the device specific close if this - * port is being closed by the last owner. Ensure we do - * this before we drop the port count. The call is protected - * by the port mutex - */ - serial->type->close(tty, port, filp); - - if (port->port.count == (port->console ? 2 : 1)) { - struct tty_struct *tty = tty_port_tty_get(&port->port); - if (tty) { - /* We must do this before we drop the port count to - zero. */ - if (tty->driver_data) - tty->driver_data = NULL; - tty_port_tty_set(&port->port, NULL); - tty_kref_put(tty); - } - } + if (drv->close) + drv->close(port); - --port->port.count; - count = port->port.count; mutex_unlock(&port->mutex); - put_device(&port->dev); +} + +/** + * serial_do_free - free resources post close/hangup + * @port: port to free up + * + * Do the resource freeing and refcount dropping for the port. We must + * be careful about ordering and we must avoid freeing up the console. + */ +static void serial_do_free(struct usb_serial_port *port) +{ + struct usb_serial *serial; + struct module *owner; + + /* The console is magical, do not hang up the console hardware + or there will be tears */ + if (port->console) + return; + + serial = port->serial; + owner = serial->type->driver.owner; + put_device(&port->dev); /* Mustn't dereference port any more */ - if (count == 0) { - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - usb_autopm_put_interface(serial->interface); - mutex_unlock(&serial->disc_mutex); - } + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + usb_autopm_put_interface(serial->interface); + mutex_unlock(&serial->disc_mutex); usb_serial_put(serial); - /* Mustn't dereference serial any more */ - if (count == 0) - module_put(owner); + module_put(owner); +} + +static void serial_close(struct tty_struct *tty, struct file *filp) +{ + struct usb_serial_port *port = tty->driver_data; + + dbg("%s - port %d", __func__, port->number); + + + if (tty_port_close_start(&port->port, tty, filp) == 0) + return; + + serial_do_down(port); + tty_port_close_end(&port->port, tty); + tty_port_tty_set(&port->port, NULL); + serial_do_free(port); +} + +static void serial_hangup(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + serial_do_down(port); + tty_port_hangup(&port->port); + serial_do_free(port); } static int serial_write(struct tty_struct *tty, const unsigned char *buf, @@ -648,6 +675,29 @@ static struct usb_serial_driver *search_serial_device( return NULL; } +static int serial_carrier_raised(struct tty_port *port) +{ + struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); + struct usb_serial_driver *drv = p->serial->type; + if (drv->carrier_raised) + return drv->carrier_raised(p); + /* No carrier control - don't block */ + return 1; +} + +static void serial_dtr_rts(struct tty_port *port, int on) +{ + struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); + struct usb_serial_driver *drv = p->serial->type; + if (drv->dtr_rts) + drv->dtr_rts(p, on); +} + +static const struct tty_port_operations serial_port_ops = { + .carrier_raised = serial_carrier_raised, + .dtr_rts = serial_dtr_rts, +}; + int usb_serial_probe(struct usb_interface *interface, const struct usb_device_id *id) { @@ -841,6 +891,7 @@ int usb_serial_probe(struct usb_interface *interface, if (!port) goto probe_error; tty_port_init(&port->port); + port->port.ops = &serial_port_ops; port->serial = serial; spin_lock_init(&port->lock); mutex_init(&port->mutex); @@ -974,6 +1025,7 @@ int usb_serial_probe(struct usb_interface *interface, if (retval > 0) { /* quietly accept this device, but don't bind to a serial port as it's about to disappear */ + serial->num_ports = 0; goto exit; } } @@ -1070,6 +1122,9 @@ void usb_serial_disconnect(struct usb_interface *interface) if (port) { struct tty_struct *tty = tty_port_tty_get(&port->port); if (tty) { + /* The hangup will occur asynchronously but + the object refcounts will sort out all the + cleanup */ tty_hangup(tty); tty_kref_put(tty); } @@ -1134,6 +1189,7 @@ static const struct tty_operations serial_ops = { .open = serial_open, .close = serial_close, .write = serial_write, + .hangup = serial_hangup, .write_room = serial_write_room, .ioctl = serial_ioctl, .set_termios = serial_set_termios, @@ -1146,6 +1202,7 @@ static const struct tty_operations serial_ops = { .proc_fops = &serial_proc_fops, }; + struct tty_driver *usb_serial_tty_driver; static int __init usb_serial_init(void) diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 5ac414bda71..b15f1c0e1d4 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -38,8 +38,7 @@ /* function prototypes for a handspring visor */ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void visor_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void visor_close(struct usb_serial_port *port); static int visor_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int visor_write_room(struct tty_struct *tty); @@ -324,8 +323,7 @@ exit: } -static void visor_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void visor_close(struct usb_serial_port *port) { struct visor_private *priv = usb_get_serial_port_data(port); unsigned char *transfer_buffer; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 5335d3211c0..7c7295d09f3 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -147,8 +147,7 @@ static int whiteheat_attach(struct usb_serial *serial); static void whiteheat_shutdown(struct usb_serial *serial); static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void whiteheat_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void whiteheat_close(struct usb_serial_port *port); static int whiteheat_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -712,8 +711,7 @@ exit: } -static void whiteheat_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void whiteheat_close(struct usb_serial_port *port) { struct whiteheat_private *info = usb_get_serial_port_data(port); struct whiteheat_urb_wrap *wrap; @@ -723,31 +721,7 @@ static void whiteheat_close(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); - mutex_lock(&port->serial->disc_mutex); - /* filp is NULL when called from usb_serial_disconnect */ - if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) { - mutex_unlock(&port->serial->disc_mutex); - return; - } - mutex_unlock(&port->serial->disc_mutex); - - tty->closing = 1; - -/* - * Not currently in use; tty_wait_until_sent() calls - * serial_chars_in_buffer() which deadlocks on the second semaphore - * acquisition. This should be fixed at some point. Greg's been - * notified. - if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) { - tty_wait_until_sent(tty, CLOSING_DELAY); - } -*/ - - tty_driver_flush_buffer(tty); - tty_ldisc_flush(tty); - firm_report_tx_done(port); - firm_close(port); /* shutdown our bulk reads and writes */ @@ -775,10 +749,7 @@ static void whiteheat_close(struct tty_struct *tty, } spin_unlock_irq(&info->lock); mutex_unlock(&info->deathwarrant); - stop_command_port(port->serial); - - tty->closing = 0; } diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 4ca3b586064..cfa26d56ce6 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -132,7 +132,7 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_MAX_SECTORS_MIN) max_sectors = PAGE_CACHE_SIZE >> 9; - if (sdev->request_queue->max_sectors > max_sectors) + if (queue_max_sectors(sdev->request_queue) > max_sectors) blk_queue_max_sectors(sdev->request_queue, max_sectors); } else if (sdev->type == TYPE_TAPE) { @@ -483,7 +483,7 @@ static ssize_t show_max_sectors(struct device *dev, struct device_attribute *att { struct scsi_device *sdev = to_scsi_device(dev); - return sprintf(buf, "%u\n", sdev->request_queue->max_sectors); + return sprintf(buf, "%u\n", queue_max_sectors(sdev->request_queue)); } /* Input routine for the sysfs max_sectors file */ |