aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/class/cdc-acm.c1
-rw-r--r--drivers/usb/class/cdc-wdm.c2
-rw-r--r--drivers/usb/core/Kconfig6
-rw-r--r--drivers/usb/core/driver.c7
-rw-r--r--drivers/usb/core/endpoint.c2
-rw-r--r--drivers/usb/core/hcd-pci.c7
-rw-r--r--drivers/usb/core/hcd.c2
-rw-r--r--drivers/usb/core/hub.c44
-rw-r--r--drivers/usb/core/quirks.c8
-rw-r--r--drivers/usb/gadget/Kconfig9
-rw-r--r--drivers/usb/gadget/ci13xxx_udc.c268
-rw-r--r--drivers/usb/gadget/ci13xxx_udc.h9
-rw-r--r--drivers/usb/gadget/composite.c5
-rw-r--r--drivers/usb/gadget/f_mass_storage.c3
-rw-r--r--drivers/usb/gadget/f_phonet.c15
-rw-r--r--drivers/usb/gadget/imx_udc.c2
-rw-r--r--drivers/usb/gadget/langwell_udc.c4
-rw-r--r--drivers/usb/gadget/pch_udc.c127
-rw-r--r--drivers/usb/gadget/printer.c19
-rw-r--r--drivers/usb/gadget/r8a66597-udc.c2
-rw-r--r--drivers/usb/gadget/storage_common.c7
-rw-r--r--drivers/usb/host/Kconfig2
-rw-r--r--drivers/usb/host/ehci-au1xxx.c2
-rw-r--r--drivers/usb/host/ehci-fsl.c13
-rw-r--r--drivers/usb/host/ehci-fsl.h3
-rw-r--r--drivers/usb/host/ehci-hcd.c19
-rw-r--r--drivers/usb/host/ehci-hub.c7
-rw-r--r--drivers/usb/host/ehci-mxc.c25
-rw-r--r--drivers/usb/host/ehci-omap.c6
-rw-r--r--drivers/usb/host/ehci-pci.c35
-rw-r--r--drivers/usb/host/ehci-xilinx-of.c1
-rw-r--r--drivers/usb/host/fhci-hcd.c4
-rw-r--r--drivers/usb/host/fhci-tds.c4
-rw-r--r--drivers/usb/host/fsl-mph-dr-of.c11
-rw-r--r--drivers/usb/host/imx21-hcd.c2
-rw-r--r--drivers/usb/host/oxu210hp-hcd.c2
-rw-r--r--drivers/usb/host/sl811-hcd.c1
-rw-r--r--drivers/usb/host/xhci-dbg.c9
-rw-r--r--drivers/usb/host/xhci-mem.c10
-rw-r--r--drivers/usb/host/xhci-ring.c131
-rw-r--r--drivers/usb/host/xhci.c74
-rw-r--r--drivers/usb/host/xhci.h18
-rw-r--r--drivers/usb/misc/adutux.c2
-rw-r--r--drivers/usb/misc/iowarrior.c2
-rw-r--r--drivers/usb/misc/ldusb.c2
-rw-r--r--drivers/usb/misc/usbled.c2
-rw-r--r--drivers/usb/misc/uss720.c1
-rw-r--r--drivers/usb/musb/blackfin.c1
-rw-r--r--drivers/usb/musb/musb_core.c11
-rw-r--r--drivers/usb/musb/musb_core.h13
-rw-r--r--drivers/usb/musb/musb_debugfs.c1
-rw-r--r--drivers/usb/musb/musb_dma.h3
-rw-r--r--drivers/usb/musb/musb_gadget.c75
-rw-r--r--drivers/usb/musb/musb_gadget.h8
-rw-r--r--drivers/usb/musb/musb_host.c11
-rw-r--r--drivers/usb/musb/musbhsdma.h19
-rw-r--r--drivers/usb/musb/omap2430.c1
-rw-r--r--drivers/usb/otg/Kconfig2
-rw-r--r--drivers/usb/otg/nop-usb-xceiv.c2
-rw-r--r--drivers/usb/otg/ulpi.c2
-rw-r--r--drivers/usb/serial/ch341.c10
-rw-r--r--drivers/usb/serial/cp210x.c16
-rw-r--r--drivers/usb/serial/digi_acceleport.c10
-rw-r--r--drivers/usb/serial/ftdi_sio.c39
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h32
-rw-r--r--drivers/usb/serial/generic.c20
-rw-r--r--drivers/usb/serial/io_edgeport.c4
-rw-r--r--drivers/usb/serial/io_tables.h1
-rw-r--r--drivers/usb/serial/iuu_phoenix.c1
-rw-r--r--drivers/usb/serial/keyspan.h4
-rw-r--r--drivers/usb/serial/keyspan_pda.c17
-rw-r--r--drivers/usb/serial/moto_modem.c1
-rw-r--r--drivers/usb/serial/option.c24
-rw-r--r--drivers/usb/serial/oti6858.c1
-rw-r--r--drivers/usb/serial/pl2303.c12
-rw-r--r--drivers/usb/serial/pl2303.h1
-rw-r--r--drivers/usb/serial/qcaux.c3
-rw-r--r--drivers/usb/serial/siemens_mpi.c1
-rw-r--r--drivers/usb/serial/sierra.c3
-rw-r--r--drivers/usb/serial/spcp8x5.c7
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c2
-rw-r--r--drivers/usb/serial/usb-serial.c8
-rw-r--r--drivers/usb/serial/usb_debug.c1
-rw-r--r--drivers/usb/serial/usb_wwan.c15
-rw-r--r--drivers/usb/serial/visor.c12
-rw-r--r--drivers/usb/storage/unusual_cypress.h5
-rw-r--r--drivers/usb/storage/unusual_devs.h32
-rw-r--r--drivers/usb/wusbcore/wa-rpipe.c2
88 files changed, 852 insertions, 518 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index d6ede989ff2..4ab49d4eebf 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1607,6 +1607,7 @@ static const struct usb_device_id acm_ids[] = {
{ NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */
{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 6ee4451bfe2..47085e5879a 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -342,7 +342,7 @@ static ssize_t wdm_write
goto outnp;
}
- if (!file->f_flags && O_NONBLOCK)
+ if (!(file->f_flags & O_NONBLOCK))
r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
&desc->flags));
else
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index bcc24779ba0..18d02e32a3d 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -123,9 +123,9 @@ config USB_OTG
config USB_OTG_WHITELIST
bool "Rely on OTG Targeted Peripherals List"
- depends on USB_OTG || EMBEDDED
+ depends on USB_OTG || EXPERT
default y if USB_OTG
- default n if EMBEDDED
+ default n if EXPERT
help
If you say Y here, the "otg_whitelist.h" file will be used as a
product whitelist, so USB peripherals not listed there will be
@@ -141,7 +141,7 @@ config USB_OTG_WHITELIST
config USB_OTG_BLACKLIST_HUB
bool "Disable external hubs"
- depends on USB_OTG || EMBEDDED
+ depends on USB_OTG || EXPERT
help
If you say Y here, then Linux will refuse to enumerate
external hubs. OTG hosts are allowed to reduce hardware
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index b9278a1fb9e..fca61720b87 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -375,7 +375,7 @@ static int usb_unbind_interface(struct device *dev)
* Just re-enable it without affecting the endpoint toggles.
*/
usb_enable_interface(udev, intf, false);
- } else if (!error && intf->dev.power.status == DPM_ON) {
+ } else if (!error && !intf->dev.power.in_suspend) {
r = usb_set_interface(udev, intf->altsetting[0].
desc.bInterfaceNumber, 0);
if (r < 0)
@@ -960,7 +960,7 @@ void usb_rebind_intf(struct usb_interface *intf)
}
/* Try to rebind the interface */
- if (intf->dev.power.status == DPM_ON) {
+ if (!intf->dev.power.in_suspend) {
intf->needs_binding = 0;
rc = device_attach(&intf->dev);
if (rc < 0)
@@ -1107,8 +1107,7 @@ static int usb_resume_interface(struct usb_device *udev,
if (intf->condition == USB_INTERFACE_UNBOUND) {
/* Carry out a deferred switch to altsetting 0 */
- if (intf->needs_altsetting0 &&
- intf->dev.power.status == DPM_ON) {
+ if (intf->needs_altsetting0 && !intf->dev.power.in_suspend) {
usb_set_interface(udev, intf->altsetting[0].
desc.bInterfaceNumber, 0);
intf->needs_altsetting0 = 0;
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 9da25056302..df502a98d0d 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -192,12 +192,12 @@ int usb_create_ep_devs(struct device *parent,
ep_dev->dev.parent = parent;
ep_dev->dev.release = ep_device_release;
dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress);
- device_enable_async_suspend(&ep_dev->dev);
retval = device_register(&ep_dev->dev);
if (retval)
goto error_register;
+ device_enable_async_suspend(&ep_dev->dev);
endpoint->ep_dev = ep_dev;
return retval;
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index b55d46070a2..f71e8e307e0 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -405,7 +405,12 @@ static int suspend_common(struct device *dev, bool do_wakeup)
return retval;
}
- synchronize_irq(pci_dev->irq);
+ /* If MSI-X is enabled, the driver will have synchronized all vectors
+ * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
+ * synchronized here.
+ */
+ if (!hcd->msix_enabled)
+ synchronize_irq(pci_dev->irq);
/* Downstream ports from this root hub should already be quiesced, so
* there will be no DMA activity. Now we can shut down the upstream
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 6a95017fa62..e935f71d7a3 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1955,7 +1955,6 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
dev_dbg(&rhdev->dev, "usb %s%s\n",
(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
- clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
if (!hcd->driver->bus_resume)
return -ENOENT;
if (hcd->state == HC_STATE_RUNNING)
@@ -1963,6 +1962,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
hcd->state = HC_STATE_RESUMING;
status = hcd->driver->bus_resume(hcd);
+ clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
if (status == 0) {
/* TRSMRCY = 10 msec */
msleep(10);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index b98efae6a1c..0f299b7aad6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -676,6 +676,8 @@ static void hub_init_func3(struct work_struct *ws);
static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
{
struct usb_device *hdev = hub->hdev;
+ struct usb_hcd *hcd;
+ int ret;
int port1;
int status;
bool need_debounce_delay = false;
@@ -714,6 +716,25 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
usb_autopm_get_interface_no_resume(
to_usb_interface(hub->intfdev));
return; /* Continues at init2: below */
+ } else if (type == HUB_RESET_RESUME) {
+ /* The internal host controller state for the hub device
+ * may be gone after a host power loss on system resume.
+ * Update the device's info so the HW knows it's a hub.
+ */
+ hcd = bus_to_hcd(hdev->bus);
+ if (hcd->driver->update_hub_device) {
+ ret = hcd->driver->update_hub_device(hcd, hdev,
+ &hub->tt, GFP_NOIO);
+ if (ret < 0) {
+ dev_err(hub->intfdev, "Host not "
+ "accepting hub info "
+ "update.\n");
+ dev_err(hub->intfdev, "LS/FS devices "
+ "and hubs may not work "
+ "under this hub\n.");
+ }
+ }
+ hub_power_on(hub, true);
} else {
hub_power_on(hub, true);
}
@@ -2660,17 +2681,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
mutex_lock(&usb_address0_mutex);
- if (!udev->config && oldspeed == USB_SPEED_SUPER) {
- /* Don't reset USB 3.0 devices during an initial setup */
- usb_set_device_state(udev, USB_STATE_DEFAULT);
- } else {
- /* Reset the device; full speed may morph to high speed */
- /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
- retval = hub_port_reset(hub, port1, udev, delay);
- if (retval < 0) /* error or disconnect */
- goto fail;
- /* success, speed is known */
- }
+ /* Reset the device; full speed may morph to high speed */
+ /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
+ retval = hub_port_reset(hub, port1, udev, delay);
+ if (retval < 0) /* error or disconnect */
+ goto fail;
+ /* success, speed is known */
+
retval = -ENODEV;
if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
@@ -2732,6 +2749,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
udev->ttport = hdev->ttport;
} else if (udev->speed != USB_SPEED_HIGH
&& hdev->speed == USB_SPEED_HIGH) {
+ if (!hub->tt.hub) {
+ dev_err(&udev->dev, "parent hub has no TT\n");
+ retval = -EINVAL;
+ goto fail;
+ }
udev->tt = &hub->tt;
udev->ttport = port1;
}
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 44c595432d6..81ce6a8e1d9 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -48,6 +48,10 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* Samsung Android phone modem - ID conflict with SPH-I500 */
+ { USB_DEVICE(0x04e8, 0x6601), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -68,6 +72,10 @@ static const struct usb_device_id usb_quirk_list[] = {
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Keytouch QWERTY Panel keyboard */
+ { USB_DEVICE(0x0926, 0x3333), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 1dc9739277b..d50099675f2 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -509,7 +509,7 @@ config USB_LANGWELL
select USB_GADGET_SELECTED
config USB_GADGET_EG20T
- boolean "Intel EG20T(Topcliff) USB Device controller"
+ boolean "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
depends on PCI
select USB_GADGET_DUALSPEED
help
@@ -525,6 +525,11 @@ config USB_GADGET_EG20T
This driver dose not support interrupt transfer or isochronous
transfer modes.
+ This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
+ for IVI(In-Vehicle Infotainment) use.
+ ML7213 is companion chip for Intel Atom E6xx series.
+ ML7213 is completely compatible for Intel EG20T PCH.
+
config USB_EG20T
tristate
depends on USB_GADGET_EG20T
@@ -541,6 +546,8 @@ config USB_GADGET_CI13XXX_MSM
ci13xxx_udc core.
This driver depends on OTG driver for PHY initialization,
clock management, powering up VBUS, and power management.
+ This driver is not supported on boards like trout which
+ has an external PHY.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "ci13xxx_msm" and force all
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 31656a2b4ab..a1c67ae1572 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -76,10 +76,21 @@ static DEFINE_SPINLOCK(udc_lock);
/* control endpoint description */
static const struct usb_endpoint_descriptor
-ctrl_endpt_desc = {
+ctrl_endpt_out_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+ .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
+};
+
+static const struct usb_endpoint_descriptor
+ctrl_endpt_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
.wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
};
@@ -265,10 +276,10 @@ static int hw_device_init(void __iomem *base)
hw_bank.size /= sizeof(u32);
reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN);
- if (reg == 0 || reg > ENDPT_MAX)
- return -ENODEV;
+ hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */
- hw_ep_max = reg; /* cache hw ENDPT_MAX */
+ if (hw_ep_max == 0 || hw_ep_max > ENDPT_MAX)
+ return -ENODEV;
/* setup lock mode ? */
@@ -1197,16 +1208,17 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr,
}
spin_lock_irqsave(udc->lock, flags);
- for (i = 0; i < hw_ep_max; i++) {
- struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
+ for (i = 0; i < hw_ep_max/2; i++) {
+ struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i];
+ struct ci13xxx_ep *mEpTx = &udc->ci13xxx_ep[i + hw_ep_max/2];
n += scnprintf(buf + n, PAGE_SIZE - n,
"EP=%02i: RX=%08X TX=%08X\n",
- i, (u32)mEp->qh[RX].dma, (u32)mEp->qh[TX].dma);
+ i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma);
for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) {
n += scnprintf(buf + n, PAGE_SIZE - n,
" %04X: %08X %08X\n", j,
- *((u32 *)mEp->qh[RX].ptr + j),
- *((u32 *)mEp->qh[TX].ptr + j));
+ *((u32 *)mEpRx->qh.ptr + j),
+ *((u32 *)mEpTx->qh.ptr + j));
}
}
spin_unlock_irqrestore(udc->lock, flags);
@@ -1293,7 +1305,7 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr,
unsigned long flags;
struct list_head *ptr = NULL;
struct ci13xxx_req *req = NULL;
- unsigned i, j, k, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32);
+ unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32);
dbg_trace("[%s] %p\n", __func__, buf);
if (attr == NULL || buf == NULL) {
@@ -1303,22 +1315,20 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr,
spin_lock_irqsave(udc->lock, flags);
for (i = 0; i < hw_ep_max; i++)
- for (k = RX; k <= TX; k++)
- list_for_each(ptr, &udc->ci13xxx_ep[i].qh[k].queue)
- {
- req = list_entry(ptr,
- struct ci13xxx_req, queue);
+ list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue)
+ {
+ req = list_entry(ptr, struct ci13xxx_req, queue);
+
+ n += scnprintf(buf + n, PAGE_SIZE - n,
+ "EP=%02i: TD=%08X %s\n",
+ i % hw_ep_max/2, (u32)req->dma,
+ ((i < hw_ep_max/2) ? "RX" : "TX"));
+ for (j = 0; j < qSize; j++)
n += scnprintf(buf + n, PAGE_SIZE - n,
- "EP=%02i: TD=%08X %s\n",
- i, (u32)req->dma,
- ((k == RX) ? "RX" : "TX"));
-
- for (j = 0; j < qSize; j++)
- n += scnprintf(buf + n, PAGE_SIZE - n,
- " %04X: %08X\n", j,
- *((u32 *)req->ptr + j));
- }
+ " %04X: %08X\n", j,
+ *((u32 *)req->ptr + j));
+ }
spin_unlock_irqrestore(udc->lock, flags);
return n;
@@ -1467,12 +1477,12 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
* At this point it's guaranteed exclusive access to qhead
* (endpt is not primed) so it's no need to use tripwire
*/
- mEp->qh[mEp->dir].ptr->td.next = mReq->dma; /* TERMINATE = 0 */
- mEp->qh[mEp->dir].ptr->td.token &= ~TD_STATUS; /* clear status */
+ mEp->qh.ptr->td.next = mReq->dma; /* TERMINATE = 0 */
+ mEp->qh.ptr->td.token &= ~TD_STATUS; /* clear status */
if (mReq->req.zero == 0)
- mEp->qh[mEp->dir].ptr->cap |= QH_ZLT;
+ mEp->qh.ptr->cap |= QH_ZLT;
else
- mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT;
+ mEp->qh.ptr->cap &= ~QH_ZLT;
wmb(); /* synchronize before ep prime */
@@ -1542,11 +1552,11 @@ __acquires(mEp->lock)
hw_ep_flush(mEp->num, mEp->dir);
- while (!list_empty(&mEp->qh[mEp->dir].queue)) {
+ while (!list_empty(&mEp->qh.queue)) {
/* pop oldest request */
struct ci13xxx_req *mReq = \
- list_entry(mEp->qh[mEp->dir].queue.next,
+ list_entry(mEp->qh.queue.next,
struct ci13xxx_req, queue);
list_del_init(&mReq->queue);
mReq->req.status = -ESHUTDOWN;
@@ -1571,8 +1581,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
{
struct usb_ep *ep;
struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget);
- struct ci13xxx_ep *mEp = container_of(gadget->ep0,
- struct ci13xxx_ep, ep);
trace("%p", gadget);
@@ -1583,7 +1591,8 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
gadget_for_each_ep(ep, gadget) {
usb_ep_fifo_flush(ep);
}
- usb_ep_fifo_flush(gadget->ep0);
+ usb_ep_fifo_flush(&udc->ep0out.ep);
+ usb_ep_fifo_flush(&udc->ep0in.ep);
udc->driver->disconnect(gadget);
@@ -1591,11 +1600,12 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
gadget_for_each_ep(ep, gadget) {
usb_ep_disable(ep);
}
- usb_ep_disable(gadget->ep0);
+ usb_ep_disable(&udc->ep0out.ep);
+ usb_ep_disable(&udc->ep0in.ep);
- if (mEp->status != NULL) {
- usb_ep_free_request(gadget->ep0, mEp->status);
- mEp->status = NULL;
+ if (udc->status != NULL) {
+ usb_ep_free_request(&udc->ep0in.ep, udc->status);
+ udc->status = NULL;
}
return 0;
@@ -1614,7 +1624,6 @@ static void isr_reset_handler(struct ci13xxx *udc)
__releases(udc->lock)
__acquires(udc->lock)
{
- struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[0];
int retval;
trace("%p", udc);
@@ -1635,11 +1644,15 @@ __acquires(udc->lock)
if (retval)
goto done;
- retval = usb_ep_enable(&mEp->ep, &ctrl_endpt_desc);
+ retval = usb_ep_enable(&udc->ep0out.ep, &ctrl_endpt_out_desc);
+ if (retval)
+ goto done;
+
+ retval = usb_ep_enable(&udc->ep0in.ep, &ctrl_endpt_in_desc);
if (!retval) {
- mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_ATOMIC);
- if (mEp->status == NULL) {
- usb_ep_disable(&mEp->ep);
+ udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC);
+ if (udc->status == NULL) {
+ usb_ep_disable(&udc->ep0out.ep);
retval = -ENOMEM;
}
}
@@ -1672,16 +1685,17 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
/**
* isr_get_status_response: get_status request response
- * @ep: endpoint
+ * @udc: udc struct
* @setup: setup request packet
*
* This function returns an error code
*/
-static int isr_get_status_response(struct ci13xxx_ep *mEp,
+static int isr_get_status_response(struct ci13xxx *udc,
struct usb_ctrlrequest *setup)
__releases(mEp->lock)
__acquires(mEp->lock)
{
+ struct ci13xxx_ep *mEp = &udc->ep0in;
struct usb_request *req = NULL;
gfp_t gfp_flags = GFP_ATOMIC;
int dir, num, retval;
@@ -1736,27 +1750,23 @@ __acquires(mEp->lock)
/**
* isr_setup_status_phase: queues the status phase of a setup transation
- * @mEp: endpoint
+ * @udc: udc struct
*
* This function returns an error code
*/
-static int isr_setup_status_phase(struct ci13xxx_ep *mEp)
+static int isr_setup_status_phase(struct ci13xxx *udc)
__releases(mEp->lock)
__acquires(mEp->lock)
{
int retval;
+ struct ci13xxx_ep *mEp;
- trace("%p", mEp);
-
- /* mEp is always valid & configured */
-
- if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
- mEp->dir = (mEp->dir == TX) ? RX : TX;
+ trace("%p", udc);
- mEp->status->no_interrupt = 1;
+ mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in;
spin_unlock(mEp->lock);
- retval = usb_ep_queue(&mEp->ep, mEp->status, GFP_ATOMIC);
+ retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC);
spin_lock(mEp->lock);
return retval;
@@ -1778,11 +1788,11 @@ __acquires(mEp->lock)
trace("%p", mEp);
- if (list_empty(&mEp->qh[mEp->dir].queue))
+ if (list_empty(&mEp->qh.queue))
return -EINVAL;
/* pop oldest request */
- mReq = list_entry(mEp->qh[mEp->dir].queue.next,
+ mReq = list_entry(mEp->qh.queue.next,
struct ci13xxx_req, queue);
list_del_init(&mReq->queue);
@@ -1794,10 +1804,10 @@ __acquires(mEp->lock)
dbg_done(_usb_addr(mEp), mReq->ptr->token, retval);
- if (!list_empty(&mEp->qh[mEp->dir].queue)) {
+ if (!list_empty(&mEp->qh.queue)) {
struct ci13xxx_req* mReqEnq;
- mReqEnq = list_entry(mEp->qh[mEp->dir].queue.next,
+ mReqEnq = list_entry(mEp->qh.queue.next,
struct ci13xxx_req, queue);
_hardware_enqueue(mEp, mReqEnq);
}
@@ -1836,16 +1846,14 @@ __acquires(udc->lock)
int type, num, err = -EINVAL;
struct usb_ctrlrequest req;
-
if (mEp->desc == NULL)
continue; /* not configured */
- if ((mEp->dir == RX && hw_test_and_clear_complete(i)) ||
- (mEp->dir == TX && hw_test_and_clear_complete(i + 16))) {
+ if (hw_test_and_clear_complete(i)) {
err = isr_tr_complete_low(mEp);
if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
if (err > 0) /* needs status phase */
- err = isr_setup_status_phase(mEp);
+ err = isr_setup_status_phase(udc);
if (err < 0) {
dbg_event(_usb_addr(mEp),
"ERROR", err);
@@ -1866,15 +1874,22 @@ __acquires(udc->lock)
continue;
}
+ /*
+ * Flush data and handshake transactions of previous
+ * setup packet.
+ */
+ _ep_nuke(&udc->ep0out);
+ _ep_nuke(&udc->ep0in);
+
/* read_setup_packet */
do {
hw_test_and_set_setup_guard();
- memcpy(&req, &mEp->qh[RX].ptr->setup, sizeof(req));
+ memcpy(&req, &mEp->qh.ptr->setup, sizeof(req));
} while (!hw_test_and_clear_setup_guard());
type = req.bRequestType;
- mEp->dir = (type & USB_DIR_IN) ? TX : RX;
+ udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
dbg_setup(_usb_addr(mEp), &req);
@@ -1895,7 +1910,7 @@ __acquires(udc->lock)
if (err)
break;
}
- err = isr_setup_status_phase(mEp);
+ err = isr_setup_status_phase(udc);
break;
case USB_REQ_GET_STATUS:
if (type != (USB_DIR_IN|USB_RECIP_DEVICE) &&
@@ -1905,7 +1920,7 @@ __acquires(udc->lock)
if (le16_to_cpu(req.wLength) != 2 ||
le16_to_cpu(req.wValue) != 0)
break;
- err = isr_get_status_response(mEp, &req);
+ err = isr_get_status_response(udc, &req);
break;
case USB_REQ_SET_ADDRESS:
if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
@@ -1916,7 +1931,7 @@ __acquires(udc->lock)
err = hw_usb_set_address((u8)le16_to_cpu(req.wValue));
if (err)
break;
- err = isr_setup_status_phase(mEp);
+ err = isr_setup_status_phase(udc);
break;
case USB_REQ_SET_FEATURE:
if (type != (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
@@ -1932,12 +1947,12 @@ __acquires(udc->lock)
spin_lock(udc->lock);
if (err)
break;
- err = isr_setup_status_phase(mEp);
+ err = isr_setup_status_phase(udc);
break;
default:
delegate:
if (req.wLength == 0) /* no data phase */
- mEp->dir = TX;
+ udc->ep0_dir = TX;
spin_unlock(udc->lock);
err = udc->driver->setup(&udc->gadget, &req);
@@ -1968,7 +1983,7 @@ static int ep_enable(struct usb_ep *ep,
const struct usb_endpoint_descriptor *desc)
{
struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
- int direction, retval = 0;
+ int retval = 0;
unsigned long flags;
trace("%p, %p", ep, desc);
@@ -1982,7 +1997,7 @@ static int ep_enable(struct usb_ep *ep,
mEp->desc = desc;
- if (!list_empty(&mEp->qh[mEp->dir].queue))
+ if (!list_empty(&mEp->qh.queue))
warn("enabling a non-empty endpoint!");
mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX;
@@ -1991,29 +2006,22 @@ static int ep_enable(struct usb_ep *ep,
mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize);
- direction = mEp->dir;
- do {
- dbg_event(_usb_addr(mEp), "ENABLE", 0);
+ dbg_event(_usb_addr(mEp), "ENABLE", 0);
- mEp->qh[mEp->dir].ptr->cap = 0;
+ mEp->qh.ptr->cap = 0;
- if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
- mEp->qh[mEp->dir].ptr->cap |= QH_IOS;
- else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
- mEp->qh[mEp->dir].ptr->cap &= ~QH_MULT;
- else
- mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT;
-
- mEp->qh[mEp->dir].ptr->cap |=
- (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT;
- mEp->qh[mEp->dir].ptr->td.next |= TD_TERMINATE; /* needed? */
-
- retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type);
+ if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
+ mEp->qh.ptr->cap |= QH_IOS;
+ else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
+ mEp->qh.ptr->cap &= ~QH_MULT;
+ else
+ mEp->qh.ptr->cap &= ~QH_ZLT;
- if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
- mEp->dir = (mEp->dir == TX) ? RX : TX;
+ mEp->qh.ptr->cap |=
+ (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT;
+ mEp->qh.ptr->td.next |= TD_TERMINATE; /* needed? */
- } while (mEp->dir != direction);
+ retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type);
spin_unlock_irqrestore(mEp->lock, flags);
return retval;
@@ -2146,7 +2154,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
spin_lock_irqsave(mEp->lock, flags);
if (mEp->type == USB_ENDPOINT_XFER_CONTROL &&
- !list_empty(&mEp->qh[mEp->dir].queue)) {
+ !list_empty(&mEp->qh.queue)) {
_ep_nuke(mEp);
retval = -EOVERFLOW;
warn("endpoint ctrl %X nuked", _usb_addr(mEp));
@@ -2170,9 +2178,9 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
/* push request */
mReq->req.status = -EINPROGRESS;
mReq->req.actual = 0;
- list_add_tail(&mReq->queue, &mEp->qh[mEp->dir].queue);
+ list_add_tail(&mReq->queue, &mEp->qh.queue);
- if (list_is_singular(&mEp->qh[mEp->dir].queue))
+ if (list_is_singular(&mEp->qh.queue))
retval = _hardware_enqueue(mEp, mReq);
if (retval == -EALREADY) {
@@ -2199,7 +2207,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
trace("%p, %p", ep, req);
if (ep == NULL || req == NULL || mEp->desc == NULL ||
- list_empty(&mReq->queue) || list_empty(&mEp->qh[mEp->dir].queue))
+ list_empty(&mReq->queue) || list_empty(&mEp->qh.queue))
return -EINVAL;
spin_lock_irqsave(mEp->lock, flags);
@@ -2244,7 +2252,7 @@ static int ep_set_halt(struct usb_ep *ep, int value)
#ifndef STALL_IN
/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX &&
- !list_empty(&mEp->qh[mEp->dir].queue)) {
+ !list_empty(&mEp->qh.queue)) {
spin_unlock_irqrestore(mEp->lock, flags);
return -EAGAIN;
}
@@ -2355,7 +2363,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
if (is_active) {
pm_runtime_get_sync(&_gadget->dev);
hw_device_reset(udc);
- hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma);
+ hw_device_state(udc->ep0out.qh.dma);
} else {
hw_device_state(0);
if (udc->udc_driver->notify_event)
@@ -2390,7 +2398,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
int (*bind)(struct usb_gadget *))
{
struct ci13xxx *udc = _udc;
- unsigned long i, k, flags;
+ unsigned long flags;
+ int i, j;
int retval = -ENOMEM;
trace("%p", driver);
@@ -2427,45 +2436,46 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
info("hw_ep_max = %d", hw_ep_max);
- udc->driver = driver;
udc->gadget.dev.driver = NULL;
retval = 0;
- for (i = 0; i < hw_ep_max; i++) {
- struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
+ for (i = 0; i < hw_ep_max/2; i++) {
+ for (j = RX; j <= TX; j++) {
+ int k = i + j * hw_ep_max/2;
+ struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k];
- scnprintf(mEp->name, sizeof(mEp->name), "ep%i", (int)i);
+ scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i,
+ (j == TX) ? "in" : "out");
- mEp->lock = udc->lock;
- mEp->device = &udc->gadget.dev;
- mEp->td_pool = udc->td_pool;
+ mEp->lock = udc->lock;
+ mEp->device = &udc->gadget.dev;
+ mEp->td_pool = udc->td_pool;
- mEp->ep.name = mEp->name;
- mEp->ep.ops = &usb_ep_ops;
- mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
+ mEp->ep.name = mEp->name;
+ mEp->ep.ops = &usb_ep_ops;
+ mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
- /* this allocation cannot be random */
- for (k = RX; k <= TX; k++) {
- INIT_LIST_HEAD(&mEp->qh[k].queue);
+ INIT_LIST_HEAD(&mEp->qh.queue);
spin_unlock_irqrestore(udc->lock, flags);
- mEp->qh[k].ptr = dma_pool_alloc(udc->qh_pool,
- GFP_KERNEL,
- &mEp->qh[k].dma);
+ mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL,
+ &mEp->qh.dma);
spin_lock_irqsave(udc->lock, flags);
- if (mEp->qh[k].ptr == NULL)
+ if (mEp->qh.ptr == NULL)
retval = -ENOMEM;
else
- memset(mEp->qh[k].ptr, 0,
- sizeof(*mEp->qh[k].ptr));
- }
- if (i == 0)
- udc->gadget.ep0 = &mEp->ep;
- else
+ memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr));
+
+ /* skip ep0 out and in endpoints */
+ if (i == 0)
+ continue;
+
list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list);
+ }
}
if (retval)
goto done;
+ udc->gadget.ep0 = &udc->ep0in.ep;
/* bind gadget */
driver->driver.bus = NULL;
udc->gadget.dev.driver = &driver->driver;
@@ -2479,6 +2489,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
goto done;
}
+ udc->driver = driver;
pm_runtime_get_sync(&udc->gadget.dev);
if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) {
if (udc->vbus_active) {
@@ -2490,14 +2501,12 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
}
}
- retval = hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma);
+ retval = hw_device_state(udc->ep0out.qh.dma);
if (retval)
pm_runtime_put_sync(&udc->gadget.dev);
done:
spin_unlock_irqrestore(udc->lock, flags);
- if (retval)
- usb_gadget_unregister_driver(driver);
return retval;
}
EXPORT_SYMBOL(usb_gadget_probe_driver);
@@ -2510,7 +2519,7 @@ EXPORT_SYMBOL(usb_gadget_probe_driver);
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
{
struct ci13xxx *udc = _udc;
- unsigned long i, k, flags;
+ unsigned long i, flags;
trace("%p", driver);
@@ -2546,17 +2555,14 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
for (i = 0; i < hw_ep_max; i++) {
struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
- if (i == 0)
- udc->gadget.ep0 = NULL;
- else if (!list_empty(&mEp->ep.ep_list))
+ if (!list_empty(&mEp->ep.ep_list))
list_del_init(&mEp->ep.ep_list);
- for (k = RX; k <= TX; k++)
- if (mEp->qh[k].ptr != NULL)
- dma_pool_free(udc->qh_pool,
- mEp->qh[k].ptr, mEp->qh[k].dma);
+ if (mEp->qh.ptr != NULL)
+ dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma);
}
+ udc->gadget.ep0 = NULL;
udc->driver = NULL;
spin_unlock_irqrestore(udc->lock, flags);
diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h
index f61fed07f76..a2492b65f98 100644
--- a/drivers/usb/gadget/ci13xxx_udc.h
+++ b/drivers/usb/gadget/ci13xxx_udc.h
@@ -20,7 +20,7 @@
* DEFINE
*****************************************************************************/
#define CI13XXX_PAGE_SIZE 4096ul /* page size for TD's */
-#define ENDPT_MAX (16)
+#define ENDPT_MAX (32)
#define CTRL_PAYLOAD_MAX (64)
#define RX (0) /* similar to USB_DIR_OUT but can be used as an index */
#define TX (1) /* similar to USB_DIR_IN but can be used as an index */
@@ -88,8 +88,7 @@ struct ci13xxx_ep {
struct list_head queue;
struct ci13xxx_qh *ptr;
dma_addr_t dma;
- } qh[2];
- struct usb_request *status;
+ } qh;
int wedge;
/* global resources */
@@ -119,9 +118,13 @@ struct ci13xxx {
struct dma_pool *qh_pool; /* DMA pool for queue heads */
struct dma_pool *td_pool; /* DMA pool for transfer descs */
+ struct usb_request *status; /* ep0 status request */
struct usb_gadget gadget; /* USB slave device */
struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX]; /* extended endpts */
+ u32 ep0_dir; /* ep0 direction */
+#define ep0out ci13xxx_ep[0]
+#define ep0in ci13xxx_ep[16]
struct usb_gadget_driver *driver; /* 3rd party gadget driver */
struct ci13xxx_udc_driver *udc_driver; /* device controller driver */
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index f6ff8456d52..1ba4befe336 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -928,8 +928,9 @@ unknown:
*/
switch (ctrl->bRequestType & USB_RECIP_MASK) {
case USB_RECIP_INTERFACE:
- if (cdev->config)
- f = cdev->config->interface[intf];
+ if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+ break;
+ f = cdev->config->interface[intf];
break;
case USB_RECIP_ENDPOINT:
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index b5dbb2308f5..6d8e533949e 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -293,6 +293,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
#include "gadget_chips.h"
@@ -2763,7 +2764,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
return ERR_PTR(-ENOMEM);
common->free_storage_on_release = 1;
} else {
- memset(common, 0, sizeof common);
+ memset(common, 0, sizeof *common);
common->free_storage_on_release = 0;
}
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 3c6e1a05874..5e1495097ec 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -346,14 +346,19 @@ static void pn_rx_complete(struct usb_ep *ep, struct usb_request *req)
if (unlikely(!skb))
break;
- skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, 0,
- req->actual);
- page = NULL;
- if (req->actual < req->length) { /* Last fragment */
+ if (skb->len == 0) { /* First fragment */
skb->protocol = htons(ETH_P_PHONET);
skb_reset_mac_header(skb);
- pskb_pull(skb, 1);
+ /* Can't use pskb_pull() on page in IRQ */
+ memcpy(skb_put(skb, 1), page_address(page), 1);
+ }
+
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+ skb->len == 0, req->actual);
+ page = NULL;
+
+ if (req->actual < req->length) { /* Last fragment */
skb->dev = dev;
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 1210534822d..5408186afc3 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1320,7 +1320,7 @@ static struct imx_udc_struct controller = {
};
/*******************************************************************************
- * USB gadged driver functions
+ * USB gadget driver functions
*******************************************************************************
*/
int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 777972454e3..1eca8b47ce3 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -3086,7 +3086,7 @@ static void langwell_udc_remove(struct pci_dev *pdev)
kfree(dev->ep);
- /* diable IRQ handler */
+ /* disable IRQ handler */
if (dev->got_irq)
free_irq(pdev->irq, dev);
@@ -3406,7 +3406,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
/* disable interrupt and set controller to stop state */
langwell_udc_stop(dev);
- /* diable IRQ handler */
+ /* disable IRQ handler */
if (dev->got_irq)
free_irq(pdev->irq, dev);
dev->got_irq = 0;
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 0c8dd81dddc..b120dbb64d0 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -198,10 +198,10 @@
#define PCH_UDC_BRLEN 0x0F /* Burst length */
#define PCH_UDC_THLEN 0x1F /* Threshold length */
/* Value of EP Buffer Size */
-#define UDC_EP0IN_BUFF_SIZE 64
-#define UDC_EPIN_BUFF_SIZE 512
-#define UDC_EP0OUT_BUFF_SIZE 64
-#define UDC_EPOUT_BUFF_SIZE 512
+#define UDC_EP0IN_BUFF_SIZE 16
+#define UDC_EPIN_BUFF_SIZE 256
+#define UDC_EP0OUT_BUFF_SIZE 16
+#define UDC_EPOUT_BUFF_SIZE 256
/* Value of EP maximum packet size */
#define UDC_EP0IN_MAX_PKT_SIZE 64
#define UDC_EP0OUT_MAX_PKT_SIZE 64
@@ -351,7 +351,7 @@ struct pch_udc_dev {
struct pci_pool *data_requests;
struct pci_pool *stp_requests;
dma_addr_t dma_addr;
- unsigned long ep0out_buf[64];
+ void *ep0out_buf;
struct usb_ctrlrequest setup_data;
unsigned long phys_addr;
void __iomem *base_addr;
@@ -361,6 +361,8 @@ struct pch_udc_dev {
#define PCH_UDC_PCI_BAR 1
#define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808
+#define PCI_VENDOR_ID_ROHM 0x10DB
+#define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D
static const char ep0_string[] = "ep0in";
static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */
@@ -1219,11 +1221,11 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
dev = ep->dev;
if (req->dma_mapped) {
if (ep->in)
- pci_unmap_single(dev->pdev, req->req.dma,
- req->req.length, PCI_DMA_TODEVICE);
+ dma_unmap_single(&dev->pdev->dev, req->req.dma,
+ req->req.length, DMA_TO_DEVICE);
else
- pci_unmap_single(dev->pdev, req->req.dma,
- req->req.length, PCI_DMA_FROMDEVICE);
+ dma_unmap_single(&dev->pdev->dev, req->req.dma,
+ req->req.length, DMA_FROM_DEVICE);
req->dma_mapped = 0;
req->req.dma = DMA_ADDR_INVALID;
}
@@ -1414,7 +1416,6 @@ static void pch_udc_start_rxrequest(struct pch_udc_ep *ep,
pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
td_data = req->td_data;
- ep->td_data = req->td_data;
/* Set the status bits for all descriptors */
while (1) {
td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
@@ -1613,15 +1614,19 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
if (usbreq->length &&
((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
if (ep->in)
- usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
- usbreq->length, PCI_DMA_TODEVICE);
+ usbreq->dma = dma_map_single(&dev->pdev->dev,
+ usbreq->buf,
+ usbreq->length,
+ DMA_TO_DEVICE);
else
- usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
- usbreq->length, PCI_DMA_FROMDEVICE);
+ usbreq->dma = dma_map_single(&dev->pdev->dev,
+ usbreq->buf,
+ usbreq->length,
+ DMA_FROM_DEVICE);
req->dma_mapped = 1;
}
if (usbreq->length > 0) {
- retval = prepare_dma(ep, req, gfp);
+ retval = prepare_dma(ep, req, GFP_ATOMIC);
if (retval)
goto probe_end;
}
@@ -1646,7 +1651,6 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
pch_udc_wait_ep_stall(ep);
pch_udc_ep_clear_nak(ep);
pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num));
- pch_udc_set_dma(dev, DMA_DIR_TX);
}
}
/* Now add this request to the ep's pending requests */
@@ -1926,6 +1930,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
PCH_UDC_BS_DMA_DONE)
return;
pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+ pch_udc_ep_set_ddptr(ep, 0);
if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
PCH_UDC_RTS_SUCC) {
dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
@@ -1963,7 +1968,7 @@ static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num)
u32 epsts;
struct pch_udc_ep *ep;
- ep = &dev->ep[2*ep_num];
+ ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
epsts = ep->epsts;
ep->epsts = 0;
@@ -2008,7 +2013,7 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
struct pch_udc_ep *ep;
struct pch_udc_request *req = NULL;
- ep = &dev->ep[2*ep_num + 1];
+ ep = &dev->ep[UDC_EPOUT_IDX(ep_num)];
epsts = ep->epsts;
ep->epsts = 0;
@@ -2025,10 +2030,11 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
}
if (epsts & UDC_EPSTS_HE)
return;
- if (epsts & UDC_EPSTS_RSS)
+ if (epsts & UDC_EPSTS_RSS) {
pch_udc_ep_set_stall(ep);
pch_udc_enable_ep_interrupts(ep->dev,
PCH_UDC_EPINT(ep->in, ep->num));
+ }
if (epsts & UDC_EPSTS_RCS) {
if (!dev->prot_stall) {
pch_udc_ep_clear_stall(ep);
@@ -2060,8 +2066,10 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
{
u32 epsts;
struct pch_udc_ep *ep;
+ struct pch_udc_ep *ep_out;
ep = &dev->ep[UDC_EP0IN_IDX];
+ ep_out = &dev->ep[UDC_EP0OUT_IDX];
epsts = ep->epsts;
ep->epsts = 0;
@@ -2073,8 +2081,16 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
return;
if (epsts & UDC_EPSTS_HE)
return;
- if ((epsts & UDC_EPSTS_TDC) && (!dev->stall))
+ if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) {
pch_udc_complete_transfer(ep);
+ pch_udc_clear_dma(dev, DMA_DIR_RX);
+ ep_out->td_data->status = (ep_out->td_data->status &
+ ~PCH_UDC_BUFF_STS) |
+ PCH_UDC_BS_HST_RDY;
+ pch_udc_ep_clear_nak(ep_out);
+ pch_udc_set_dma(dev, DMA_DIR_RX);
+ pch_udc_ep_set_rrdy(ep_out);
+ }
/* On IN interrupt, provide data if we have any */
if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) &&
!(epsts & UDC_EPSTS_TXEMPTY))
@@ -2102,11 +2118,9 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
dev->stall = 0;
dev->ep[UDC_EP0IN_IDX].halted = 0;
dev->ep[UDC_EP0OUT_IDX].halted = 0;
- /* In data not ready */
- pch_udc_ep_set_nak(&(dev->ep[UDC_EP0IN_IDX]));
dev->setup_data = ep->td_stp->request;
pch_udc_init_setup_buff(ep->td_stp);
- pch_udc_clear_dma(dev, DMA_DIR_TX);
+ pch_udc_clear_dma(dev, DMA_DIR_RX);
pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]),
dev->ep[UDC_EP0IN_IDX].in);
if ((dev->setup_data.bRequestType & USB_DIR_IN))
@@ -2122,14 +2136,23 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
setup_supported = dev->driver->setup(&dev->gadget,
&dev->setup_data);
spin_lock(&dev->lock);
+
+ if (dev->setup_data.bRequestType & USB_DIR_IN) {
+ ep->td_data->status = (ep->td_data->status &
+ ~PCH_UDC_BUFF_STS) |
+ PCH_UDC_BS_HST_RDY;
+ pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+ }
/* ep0 in returns data on IN phase */
if (setup_supported >= 0 && setup_supported <
UDC_EP0IN_MAX_PKT_SIZE) {
pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
/* Gadget would have queued a request when
* we called the setup */
- pch_udc_set_dma(dev, DMA_DIR_RX);
- pch_udc_ep_clear_nak(ep);
+ if (!(dev->setup_data.bRequestType & USB_DIR_IN)) {
+ pch_udc_set_dma(dev, DMA_DIR_RX);
+ pch_udc_ep_clear_nak(ep);
+ }
} else if (setup_supported < 0) {
/* if unsupported request, then stall */
pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX]));
@@ -2142,22 +2165,13 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
}
} else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
UDC_EPSTS_OUT_DATA) && !dev->stall) {
- if (list_empty(&ep->queue)) {
- dev_err(&dev->pdev->dev, "%s: No request\n", __func__);
- ep->td_data->status = (ep->td_data->status &
- ~PCH_UDC_BUFF_STS) |
- PCH_UDC_BS_HST_RDY;
- pch_udc_set_dma(dev, DMA_DIR_RX);
- } else {
- /* control write */
- /* next function will pickuo an clear the status */
+ pch_udc_clear_dma(dev, DMA_DIR_RX);
+ pch_udc_ep_set_ddptr(ep, 0);
+ if (!list_empty(&ep->queue)) {
ep->epsts = stat;
-
- pch_udc_svc_data_out(dev, 0);
- /* re-program desc. pointer for possible ZLPs */
- pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
- pch_udc_set_dma(dev, DMA_DIR_RX);
+ pch_udc_svc_data_out(dev, PCH_UDC_EP0);
}
+ pch_udc_set_dma(dev, DMA_DIR_RX);
}
pch_udc_ep_set_rrdy(ep);
}
@@ -2174,7 +2188,7 @@ static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
struct pch_udc_ep *ep;
struct pch_udc_request *req;
- ep = &dev->ep[2*ep_num];
+ ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
if (!list_empty(&ep->queue)) {
req = list_entry(ep->queue.next, struct pch_udc_request, queue);
pch_udc_enable_ep_interrupts(ep->dev,
@@ -2196,13 +2210,13 @@ static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr)
for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) {
/* IN */
if (ep_intr & (0x1 << i)) {
- ep = &dev->ep[2*i];
+ ep = &dev->ep[UDC_EPIN_IDX(i)];
ep->epsts = pch_udc_read_ep_status(ep);
pch_udc_clear_ep_status(ep, ep->epsts);
}
/* OUT */
if (ep_intr & (0x10000 << i)) {
- ep = &dev->ep[2*i+1];
+ ep = &dev->ep[UDC_EPOUT_IDX(i)];
ep->epsts = pch_udc_read_ep_status(ep);
pch_udc_clear_ep_status(ep, ep->epsts);
}
@@ -2563,9 +2577,6 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
dev->ep[UDC_EP0IN_IDX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE;
dev->ep[UDC_EP0OUT_IDX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE;
- dev->dma_addr = pci_map_single(dev->pdev, dev->ep0out_buf, 256,
- PCI_DMA_FROMDEVICE);
-
/* remove ep0 in and out from the list. They have own pointer */
list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list);
list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list);
@@ -2637,6 +2648,13 @@ static int init_dma_pools(struct pch_udc_dev *dev)
dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0;
dev->ep[UDC_EP0IN_IDX].td_data = NULL;
dev->ep[UDC_EP0IN_IDX].td_data_phys = 0;
+
+ dev->ep0out_buf = kzalloc(UDC_EP0OUT_BUFF_SIZE * 4, GFP_KERNEL);
+ if (!dev->ep0out_buf)
+ return -ENOMEM;
+ dev->dma_addr = dma_map_single(&dev->pdev->dev, dev->ep0out_buf,
+ UDC_EP0OUT_BUFF_SIZE * 4,
+ DMA_FROM_DEVICE);
return 0;
}
@@ -2700,7 +2718,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
- /* Assues that there are no pending requets with this driver */
+ /* Assures that there are no pending requests with this driver */
+ driver->disconnect(&dev->gadget);
driver->unbind(&dev->gadget);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
@@ -2750,6 +2769,11 @@ static void pch_udc_remove(struct pci_dev *pdev)
pci_pool_destroy(dev->stp_requests);
}
+ if (dev->dma_addr)
+ dma_unmap_single(&dev->pdev->dev, dev->dma_addr,
+ UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE);
+ kfree(dev->ep0out_buf);
+
pch_udc_exit(dev);
if (dev->irq_registered)
@@ -2792,11 +2816,7 @@ static int pch_udc_resume(struct pci_dev *pdev)
int ret;
pci_set_power_state(pdev, PCI_D0);
- ret = pci_restore_state(pdev);
- if (ret) {
- dev_err(&pdev->dev, "%s: pci_restore_state failed\n", __func__);
- return ret;
- }
+ pci_restore_state(pdev);
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "%s: pci_enable_device failed\n", __func__);
@@ -2914,6 +2934,11 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = {
.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
.class_mask = 0xffffffff,
},
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7213_IOH_UDC),
+ .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+ .class_mask = 0xffffffff,
+ },
{ 0 },
};
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 2fc8636316c..12ff6cffedc 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -131,31 +131,31 @@ static struct printer_dev usb_printer_gadget;
* parameters are in UTF-8 (superset of ASCII's 7 bit characters).
*/
-static ushort __initdata idVendor;
+static ushort idVendor;
module_param(idVendor, ushort, S_IRUGO);
MODULE_PARM_DESC(idVendor, "USB Vendor ID");
-static ushort __initdata idProduct;
+static ushort idProduct;
module_param(idProduct, ushort, S_IRUGO);
MODULE_PARM_DESC(idProduct, "USB Product ID");
-static ushort __initdata bcdDevice;
+static ushort bcdDevice;
module_param(bcdDevice, ushort, S_IRUGO);
MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
-static char *__initdata iManufacturer;
+static char *iManufacturer;
module_param(iManufacturer, charp, S_IRUGO);
MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
-static char *__initdata iProduct;
+static char *iProduct;
module_param(iProduct, charp, S_IRUGO);
MODULE_PARM_DESC(iProduct, "USB Product string");
-static char *__initdata iSerialNum;
+static char *iSerialNum;
module_param(iSerialNum, charp, S_IRUGO);
MODULE_PARM_DESC(iSerialNum, "1");
-static char *__initdata iPNPstring;
+static char *iPNPstring;
module_param(iPNPstring, charp, S_IRUGO);
MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
@@ -1596,13 +1596,12 @@ cleanup(void)
int status;
mutex_lock(&usb_printer_gadget.lock_printer_io);
- class_destroy(usb_gadget_class);
- unregister_chrdev_region(g_printer_devno, 2);
-
status = usb_gadget_unregister_driver(&printer_driver);
if (status)
ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
+ unregister_chrdev_region(g_printer_devno, 2);
+ class_destroy(usb_gadget_class);
mutex_unlock(&usb_printer_gadget.lock_printer_io);
}
module_exit(cleanup);
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 20d43da319a..015118535f7 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -258,7 +258,7 @@ static int pipe_buffer_setting(struct r8a66597 *r8a66597,
break;
case R8A66597_BULK:
/* isochronous pipes may be used as bulk pipes */
- if (info->pipe > R8A66597_BASE_PIPENUM_BULK)
+ if (info->pipe >= R8A66597_BASE_PIPENUM_BULK)
bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK;
else
bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC;
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 3b513bafaf2..b015561fd60 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -543,7 +543,7 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
ro = curlun->initially_ro;
if (!ro) {
filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0);
- if (-EROFS == PTR_ERR(filp))
+ if (PTR_ERR(filp) == -EROFS || PTR_ERR(filp) == -EACCES)
ro = 1;
}
if (ro)
@@ -558,10 +558,7 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
if (filp->f_path.dentry)
inode = filp->f_path.dentry->d_inode;
- if (inode && S_ISBLK(inode->i_mode)) {
- if (bdev_read_only(inode->i_bdev))
- ro = 1;
- } else if (!inode || !S_ISREG(inode->i_mode)) {
+ if (!inode || (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) {
LINFO(curlun, "invalid file type: %s\n", filename);
goto out;
}
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 24046c0f587..0e6afa260ed 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -151,6 +151,8 @@ config USB_EHCI_MSM
Qualcomm chipsets. Root Hub has inbuilt TT.
This driver depends on OTG driver for PHY initialization,
clock management, powering up VBUS, and power management.
+ This driver is not supported on boards like trout which
+ has an external PHY.
config USB_EHCI_HCD_PPC_OF
bool "EHCI support for PPC USB controller on OF platform bus"
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 2baf8a84908..a869e3c103d 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -227,8 +227,8 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
* mark HW unaccessible. The PM and USB cores make sure that
* the root hub is either suspended or stopped.
*/
- spin_lock_irqsave(&ehci->lock, flags);
ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
+ spin_lock_irqsave(&ehci->lock, flags);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 86e42892016..5c761df7fa8 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -52,7 +52,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
struct resource *res;
int irq;
int retval;
- unsigned int temp;
pr_debug("initializing FSL-SOC USB Controller\n");
@@ -126,18 +125,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
goto err3;
}
- /*
- * Check if it is MPC5121 SoC, otherwise set pdata->have_sysif_regs
- * flag for 83xx or 8536 system interface registers.
- */
- if (pdata->big_endian_mmio)
- temp = in_be32(hcd->regs + FSL_SOC_USB_ID);
- else
- temp = in_le32(hcd->regs + FSL_SOC_USB_ID);
-
- if ((temp & ID_MSK) != (~((temp & NID_MSK) >> 8) & ID_MSK))
- pdata->have_sysif_regs = 1;
-
/* Enable USB controller, 83xx or 8536 */
if (pdata->have_sysif_regs)
setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 2c835379522..3fabed33d94 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -19,9 +19,6 @@
#define _EHCI_FSL_H
/* offsets for the non-ehci registers in the FSL SOC USB controller */
-#define FSL_SOC_USB_ID 0x0
-#define ID_MSK 0x3f
-#define NID_MSK 0x3f00
#define FSL_SOC_USB_ULPIVP 0x170
#define FSL_SOC_USB_PORTSC1 0x184
#define PORT_PTS_MSK (3<<30)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 6fee3cd58ef..74dcf49bd01 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -572,6 +572,8 @@ static int ehci_init(struct usb_hcd *hcd)
ehci->iaa_watchdog.function = ehci_iaa_watchdog;
ehci->iaa_watchdog.data = (unsigned long) ehci;
+ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+
/*
* hw default: 1K periodic list heads, one per frame.
* periodic_size can shrink by USBCMD update if hcc_params allows.
@@ -579,11 +581,20 @@ static int ehci_init(struct usb_hcd *hcd)
ehci->periodic_size = DEFAULT_I_TDPS;
INIT_LIST_HEAD(&ehci->cached_itd_list);
INIT_LIST_HEAD(&ehci->cached_sitd_list);
+
+ if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+ /* periodic schedule size can be smaller than default */
+ switch (EHCI_TUNE_FLS) {
+ case 0: ehci->periodic_size = 1024; break;
+ case 1: ehci->periodic_size = 512; break;
+ case 2: ehci->periodic_size = 256; break;
+ default: BUG();
+ }
+ }
if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
return retval;
/* controllers may cache some of the periodic schedule ... */
- hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
ehci->i_thresh = 2 + 8;
else // N microframes cached
@@ -637,12 +648,6 @@ static int ehci_init(struct usb_hcd *hcd)
/* periodic schedule size can be smaller than default */
temp &= ~(3 << 2);
temp |= (EHCI_TUNE_FLS << 2);
- switch (EHCI_TUNE_FLS) {
- case 0: ehci->periodic_size = 1024; break;
- case 1: ehci->periodic_size = 512; break;
- case 2: ehci->periodic_size = 256; break;
- default: BUG();
- }
}
if (HCC_LPM(hcc_params)) {
/* support link power management EHCI 1.1 addendum */
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 796ea0c8900..8a515f0d598 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -111,6 +111,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
{
int port;
u32 temp;
+ unsigned long flags;
/* If remote wakeup is enabled for the root hub but disabled
* for the controller, we must adjust all the port wakeup flags
@@ -120,6 +121,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
return;
+ spin_lock_irqsave(&ehci->lock, flags);
+
/* clear phy low-power mode before changing wakeup flags */
if (ehci->has_hostpc) {
port = HCS_N_PORTS(ehci->hcs_params);
@@ -131,7 +134,9 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
temp = ehci_readl(ehci, hostpc_reg);
ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
}
+ spin_unlock_irqrestore(&ehci->lock, flags);
msleep(5);
+ spin_lock_irqsave(&ehci->lock, flags);
}
port = HCS_N_PORTS(ehci->hcs_params);
@@ -170,6 +175,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
/* Does the root hub have a port wakeup pending? */
if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
}
static int ehci_bus_suspend (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index fa59b26fc5b..c8e360d7d97 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -21,10 +21,13 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
#include <linux/slab.h>
#include <mach/mxc_ehci.h>
+#include <asm/mach-types.h>
+
#define ULPI_VIEWPORT_OFFSET 0x170
struct ehci_mxc_priv {
@@ -114,6 +117,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
struct usb_hcd *hcd;
struct resource *res;
int irq, ret;
+ unsigned int flags;
struct ehci_mxc_priv *priv;
struct device *dev = &pdev->dev;
struct ehci_hcd *ehci;
@@ -177,8 +181,8 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
clk_enable(priv->ahbclk);
}
- /* "dr" device has its own clock */
- if (pdev->id == 0) {
+ /* "dr" device has its own clock on i.MX51 */
+ if (cpu_is_mx51() && (pdev->id == 0)) {
priv->phy1clk = clk_get(dev, "usb_phy1");
if (IS_ERR(priv->phy1clk)) {
ret = PTR_ERR(priv->phy1clk);
@@ -240,6 +244,23 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
if (ret)
goto err_add;
+ if (pdata->otg) {
+ /*
+ * efikamx and efikasb have some hardware bug which is
+ * preventing usb to work unless CHRGVBUS is set.
+ * It's in violation of USB specs
+ */
+ if (machine_is_mx51_efikamx() || machine_is_mx51_efikasb()) {
+ flags = otg_io_read(pdata->otg, ULPI_OTG_CTRL);
+ flags |= ULPI_OTG_CTRL_CHRGVBUS;
+ ret = otg_io_write(pdata->otg, flags, ULPI_OTG_CTRL);
+ if (ret) {
+ dev_err(dev, "unable to set CHRVBUS\n");
+ goto err_add;
+ }
+ }
+ }
+
return 0;
err_add:
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 680f2ef4e59..f784ceb862a 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -796,7 +796,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
- dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
+ dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret);
ret = -ENOMEM;
goto err_create_hcd;
}
@@ -864,7 +864,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
ret = omap_start_ehc(omap, hcd);
if (ret) {
- dev_dbg(&pdev->dev, "failed to start ehci\n");
+ dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret);
goto err_start;
}
@@ -879,7 +879,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (ret) {
- dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
+ dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret);
goto err_add_hcd;
}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 76179c39c0e..07bb982e59f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -44,28 +44,35 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
return 0;
}
-static int ehci_quirk_amd_SB800(struct ehci_hcd *ehci)
+static int ehci_quirk_amd_hudson(struct ehci_hcd *ehci)
{
struct pci_dev *amd_smbus_dev;
u8 rev = 0;
amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
- if (!amd_smbus_dev)
- return 0;
-
- pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
- if (rev < 0x40) {
- pci_dev_put(amd_smbus_dev);
- amd_smbus_dev = NULL;
- return 0;
+ if (amd_smbus_dev) {
+ pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+ if (rev < 0x40) {
+ pci_dev_put(amd_smbus_dev);
+ amd_smbus_dev = NULL;
+ return 0;
+ }
+ } else {
+ amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x780b, NULL);
+ if (!amd_smbus_dev)
+ return 0;
+ pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+ if (rev < 0x11 || rev > 0x18) {
+ pci_dev_put(amd_smbus_dev);
+ amd_smbus_dev = NULL;
+ return 0;
+ }
}
if (!amd_nb_dev)
amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
- if (!amd_nb_dev)
- ehci_err(ehci, "QUIRK: unable to get AMD NB device\n");
- ehci_info(ehci, "QUIRK: Enable AMD SB800 L1 fix\n");
+ ehci_info(ehci, "QUIRK: Enable exception for AMD Hudson ASPM\n");
pci_dev_put(amd_smbus_dev);
amd_smbus_dev = NULL;
@@ -131,7 +138,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
- if (ehci_quirk_amd_SB800(ehci))
+ if (ehci_quirk_amd_hudson(ehci))
ehci->amd_l1_fix = 1;
retval = ehci_halt(ehci);
@@ -360,8 +367,8 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
* mark HW unaccessible. The PM and USB cores make sure that
* the root hub is either suspended or stopped.
*/
- spin_lock_irqsave (&ehci->lock, flags);
ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
+ spin_lock_irqsave (&ehci->lock, flags);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index e8f4f36fdf0..a6f21b891f6 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -29,6 +29,7 @@
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/of_address.h>
/**
* ehci_xilinx_of_setup - Initialize the device for ehci_reset()
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 20092a27a1e..12fd184226f 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -98,13 +98,13 @@ void fhci_usb_enable_interrupt(struct fhci_usb *usb)
usb->intr_nesting_cnt--;
}
-/* diable the usb interrupt */
+/* disable the usb interrupt */
void fhci_usb_disable_interrupt(struct fhci_usb *usb)
{
struct fhci_hcd *fhci = usb->fhci;
if (usb->intr_nesting_cnt == 0) {
- /* diable the timer interrupt */
+ /* disable the timer interrupt */
disable_irq_nosync(fhci->timer->irq);
/* disable the usb interrupt */
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 7be548ca218..38fe058fbe6 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -271,8 +271,8 @@ void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
/*
* Collect the submitted frames and inform the application about them
- * It is also prepearing the TDs for new frames. If the Tx interrupts
- * are diabled, the application should call that routine to get
+ * It is also preparing the TDs for new frames. If the Tx interrupts
+ * are disabled, the application should call that routine to get
* confirmation about the submitted frames. Otherwise, the routine is
* called frome the interrupt service routine during the Tx interrupt.
* In that case the application is informed by calling the application
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 574b99ea070..79a66d622f9 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -262,19 +262,24 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev)
}
}
-struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
+static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
.big_endian_desc = 1,
.big_endian_mmio = 1,
.es = 1,
+ .have_sysif_regs = 0,
.le_setup_buf = 1,
.init = fsl_usb2_mpc5121_init,
.exit = fsl_usb2_mpc5121_exit,
};
#endif /* CONFIG_PPC_MPC512x */
+static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = {
+ .have_sysif_regs = 1,
+};
+
static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
- { .compatible = "fsl-usb2-mph", },
- { .compatible = "fsl-usb2-dr", },
+ { .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, },
+ { .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, },
#ifdef CONFIG_PPC_MPC512x
{ .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, },
#endif
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index e49b75a7800..f90d003f230 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1658,7 +1658,7 @@ static int imx21_hc_reset(struct usb_hcd *hcd)
spin_lock_irqsave(&imx21->lock, flags);
- /* Reset the Host controler modules */
+ /* Reset the Host controller modules */
writel(USBOTG_RST_RSTCTRL | USBOTG_RST_RSTRH |
USBOTG_RST_RSTHSIE | USBOTG_RST_RSTHC,
imx21->regs + USBOTG_RST_CTRL);
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 32149be4ad8..e0cb12b573f 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3094,7 +3094,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf)
/* Some boards (mostly VIA?) report bogus overcurrent indications,
* causing massive log spam unless we completely ignore them. It
- * may be relevant that VIA VT8235 controlers, where PORT_POWER is
+ * may be relevant that VIA VT8235 controllers, where PORT_POWER is
* always set, seem to clear PORT_OCC and PORT_CSC when writing to
* PORT_POWER; that's surprising, but maybe within-spec.
*/
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 990f06b89ea..2e9602a10e9 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -861,6 +861,7 @@ static int sl811h_urb_enqueue(
DBG("dev %d ep%d maxpacket %d\n",
udev->devnum, epnum, ep->maxpacket);
retval = -EINVAL;
+ kfree(ep);
goto fail;
}
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index fcbf4abbf38..0231814a97a 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -169,9 +169,10 @@ static void xhci_print_ports(struct xhci_hcd *xhci)
}
}
-void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num)
+void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num)
{
- void *addr;
+ struct xhci_intr_reg __iomem *ir_set = &xhci->run_regs->ir_set[set_num];
+ void __iomem *addr;
u32 temp;
u64 temp_64;
@@ -449,7 +450,7 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci,
}
}
-void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
+static void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
{
/* Fields are 32 bits wide, DMA addresses are in bytes */
int field_size = 32 / 8;
@@ -488,7 +489,7 @@ void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
dbg_rsvd64(xhci, (u64 *)slot_ctx, dma);
}
-void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
+static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx,
unsigned int last_ep)
{
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 1d0f45f0e7a..a9534396e85 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -307,7 +307,7 @@ struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
/***************** Streams structures manipulation *************************/
-void xhci_free_stream_ctx(struct xhci_hcd *xhci,
+static void xhci_free_stream_ctx(struct xhci_hcd *xhci,
unsigned int num_stream_ctxs,
struct xhci_stream_ctx *stream_ctx, dma_addr_t dma)
{
@@ -335,7 +335,7 @@ void xhci_free_stream_ctx(struct xhci_hcd *xhci,
* The stream context array must be a power of 2, and can be as small as
* 64 bytes or as large as 1MB.
*/
-struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
+static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
unsigned int num_stream_ctxs, dma_addr_t *dma,
gfp_t mem_flags)
{
@@ -1900,11 +1900,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
val &= DBOFF_MASK;
xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x"
" from cap regs base addr\n", val);
- xhci->dba = (void *) xhci->cap_regs + val;
+ xhci->dba = (void __iomem *) xhci->cap_regs + val;
xhci_dbg_regs(xhci);
xhci_print_run_regs(xhci);
/* Set ir_set to interrupt register set 0 */
- xhci->ir_set = (void *) xhci->run_regs->ir_set;
+ xhci->ir_set = &xhci->run_regs->ir_set[0];
/*
* Event ring setup: Allocate a normal ring, but also setup
@@ -1961,7 +1961,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
/* Set the event ring dequeue address */
xhci_set_hc_event_deq(xhci);
xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n");
- xhci_print_ir_set(xhci, xhci->ir_set, 0);
+ xhci_print_ir_set(xhci, 0);
/*
* XXX: Might need to set the Interrupter Moderation Register to
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index df558f6f84e..3289bf4832c 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -308,11 +308,8 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
/* Ring the host controller doorbell after placing a command on the ring */
void xhci_ring_cmd_db(struct xhci_hcd *xhci)
{
- u32 temp;
-
xhci_dbg(xhci, "// Ding dong!\n");
- temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK;
- xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]);
+ xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
/* Flush PCI posted writes */
xhci_readl(xhci, &xhci->dba->doorbell[0]);
}
@@ -322,26 +319,24 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
unsigned int ep_index,
unsigned int stream_id)
{
- struct xhci_virt_ep *ep;
- unsigned int ep_state;
- u32 field;
__u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
+ struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
+ unsigned int ep_state = ep->ep_state;
- ep = &xhci->devs[slot_id]->eps[ep_index];
- ep_state = ep->ep_state;
/* Don't ring the doorbell for this endpoint if there are pending
- * cancellations because the we don't want to interrupt processing.
+ * cancellations because we don't want to interrupt processing.
* We don't want to restart any stream rings if there's a set dequeue
* pointer command pending because the device can choose to start any
* stream once the endpoint is on the HW schedule.
* FIXME - check all the stream rings for pending cancellations.
*/
- if (!(ep_state & EP_HALT_PENDING) && !(ep_state & SET_DEQ_PENDING)
- && !(ep_state & EP_HALTED)) {
- field = xhci_readl(xhci, db_addr) & DB_MASK;
- field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id);
- xhci_writel(xhci, field, db_addr);
- }
+ if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) ||
+ (ep_state & EP_HALTED))
+ return;
+ xhci_writel(xhci, DB_VALUE(ep_index, stream_id), db_addr);
+ /* The CPU has better things to do at this point than wait for a
+ * write-posting flush. It'll get there soon enough.
+ */
}
/* Ring the doorbell for any rings with pending URBs */
@@ -479,8 +474,11 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
state->new_deq_seg = find_trb_seg(cur_td->start_seg,
dev->eps[ep_index].stopped_trb,
&state->new_cycle_state);
- if (!state->new_deq_seg)
- BUG();
+ if (!state->new_deq_seg) {
+ WARN_ON(1);
+ return;
+ }
+
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg(xhci, "Finding endpoint context\n");
ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
@@ -491,8 +489,10 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
state->new_deq_seg = find_trb_seg(state->new_deq_seg,
state->new_deq_ptr,
&state->new_cycle_state);
- if (!state->new_deq_seg)
- BUG();
+ if (!state->new_deq_seg) {
+ WARN_ON(1);
+ return;
+ }
trb = &state->new_deq_ptr->generic;
if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) &&
@@ -1188,7 +1188,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1);
temp = xhci_readl(xhci, addr);
- if ((temp & PORT_CONNECT) && (hcd->state == HC_STATE_SUSPENDED)) {
+ if (hcd->state == HC_STATE_SUSPENDED) {
xhci_dbg(xhci, "resume root hub\n");
usb_hcd_resume_root_hub(hcd);
}
@@ -1710,8 +1710,7 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
/* Others already handled above */
break;
}
- dev_dbg(&td->urb->dev->dev,
- "ep %#x - asked for %d bytes, "
+ xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
"%d bytes untransferred\n",
td->urb->ep->desc.bEndpointAddress,
td->urb->transfer_buffer_length,
@@ -2369,12 +2368,13 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
/* Scatter gather list entries may cross 64KB boundaries */
running_total = TRB_MAX_BUFF_SIZE -
- (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1));
+ running_total &= TRB_MAX_BUFF_SIZE - 1;
if (running_total != 0)
num_trbs++;
/* How many more 64KB chunks to transfer, how many more TRBs? */
- while (running_total < sg_dma_len(sg)) {
+ while (running_total < sg_dma_len(sg) && running_total < temp) {
num_trbs++;
running_total += TRB_MAX_BUFF_SIZE;
}
@@ -2389,7 +2389,8 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
}
xhci_dbg(xhci, "\n");
if (!in_interrupt())
- dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n",
+ xhci_dbg(xhci, "ep %#x - urb len = %d, sglist used, "
+ "num_trbs = %d\n",
urb->ep->desc.bEndpointAddress,
urb->transfer_buffer_length,
num_trbs);
@@ -2399,11 +2400,11 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
{
if (num_trbs != 0)
- dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
+ dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
"TRBs, %d left\n", __func__,
urb->ep->desc.bEndpointAddress, num_trbs);
if (running_total != urb->transfer_buffer_length)
- dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
+ dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
"queued %#x (%d), asked for %#x (%d)\n",
__func__,
urb->ep->desc.bEndpointAddress,
@@ -2414,14 +2415,17 @@ static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
unsigned int ep_index, unsigned int stream_id, int start_cycle,
- struct xhci_generic_trb *start_trb, struct xhci_td *td)
+ struct xhci_generic_trb *start_trb)
{
/*
* Pass all the TRBs to the hardware at once and make sure this write
* isn't reordered.
*/
wmb();
- start_trb->field[3] |= start_cycle;
+ if (start_cycle)
+ start_trb->field[3] |= start_cycle;
+ else
+ start_trb->field[3] &= ~0x1;
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
}
@@ -2449,7 +2453,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
* to set the polling interval (once the API is added).
*/
if (xhci_interval != ep_interval) {
- if (!printk_ratelimit())
+ if (printk_ratelimit())
dev_dbg(&urb->dev->dev, "Driver uses different interval"
" (%d microframe%s) than xHCI "
"(%d microframe%s)\n",
@@ -2535,8 +2539,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
sg = urb->sg;
addr = (u64) sg_dma_address(sg);
this_sg_len = sg_dma_len(sg);
- trb_buff_len = TRB_MAX_BUFF_SIZE -
- (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
if (trb_buff_len > urb->transfer_buffer_length)
trb_buff_len = urb->transfer_buffer_length;
@@ -2551,9 +2554,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
u32 remainder = 0;
/* Don't change the cycle bit of the first TRB until later */
- if (first_trb)
+ if (first_trb) {
first_trb = false;
- else
+ if (start_cycle == 0)
+ field |= 0x1;
+ } else
field |= ep_ring->cycle_state;
/* Chain all the TRBs together; clear the chain bit in the last
@@ -2572,7 +2577,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
(unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
(unsigned int) addr + trb_buff_len);
if (TRB_MAX_BUFF_SIZE -
- (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) {
+ (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) {
xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n");
xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n",
(unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
@@ -2616,7 +2621,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
}
trb_buff_len = TRB_MAX_BUFF_SIZE -
- (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ (addr & (TRB_MAX_BUFF_SIZE - 1));
trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
if (running_total + trb_buff_len > urb->transfer_buffer_length)
trb_buff_len =
@@ -2625,7 +2630,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
check_trb_math(urb, num_trbs, running_total);
giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
- start_cycle, start_trb, td);
+ start_cycle, start_trb);
return 0;
}
@@ -2656,7 +2661,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
num_trbs = 0;
/* How much data is (potentially) left before the 64KB boundary? */
running_total = TRB_MAX_BUFF_SIZE -
- (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
+ running_total &= TRB_MAX_BUFF_SIZE - 1;
/* If there's some data on this 64KB chunk, or we have to send a
* zero-length transfer, we need at least one TRB
@@ -2671,7 +2677,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
if (!in_interrupt())
- dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d), addr = %#llx, num_trbs = %d\n",
+ xhci_dbg(xhci, "ep %#x - urb len = %#x (%d), "
+ "addr = %#llx, num_trbs = %d\n",
urb->ep->desc.bEndpointAddress,
urb->transfer_buffer_length,
urb->transfer_buffer_length,
@@ -2699,8 +2706,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/* How much data is in the first TRB? */
addr = (u64) urb->transfer_dma;
trb_buff_len = TRB_MAX_BUFF_SIZE -
- (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
- if (urb->transfer_buffer_length < trb_buff_len)
+ (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
+ if (trb_buff_len > urb->transfer_buffer_length)
trb_buff_len = urb->transfer_buffer_length;
first_trb = true;
@@ -2711,9 +2718,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
field = 0;
/* Don't change the cycle bit of the first TRB until later */
- if (first_trb)
+ if (first_trb) {
first_trb = false;
- else
+ if (start_cycle == 0)
+ field |= 0x1;
+ } else
field |= ep_ring->cycle_state;
/* Chain all the TRBs together; clear the chain bit in the last
@@ -2757,7 +2766,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
check_trb_math(urb, num_trbs, running_total);
giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
- start_cycle, start_trb, td);
+ start_cycle, start_trb);
return 0;
}
@@ -2818,13 +2827,17 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/* Queue setup TRB - see section 6.4.1.2.1 */
/* FIXME better way to translate setup_packet into two u32 fields? */
setup = (struct usb_ctrlrequest *) urb->setup_packet;
+ field = 0;
+ field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
+ if (start_cycle == 0)
+ field |= 0x1;
queue_trb(xhci, ep_ring, false, true,
/* FIXME endianness is probably going to bite my ass here. */
setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
setup->wIndex | setup->wLength << 16,
TRB_LEN(8) | TRB_INTR_TARGET(0),
/* Immediate data in pointer */
- TRB_IDT | TRB_TYPE(TRB_SETUP));
+ field);
/* If there's data, queue data TRBs */
field = 0;
@@ -2859,7 +2872,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
giveback_first_trb(xhci, slot_id, ep_index, 0,
- start_cycle, start_trb, td);
+ start_cycle, start_trb);
return 0;
}
@@ -2872,8 +2885,8 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci,
addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
td_len = urb->iso_frame_desc[i].length;
- running_total = TRB_MAX_BUFF_SIZE -
- (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
+ running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
+ running_total &= TRB_MAX_BUFF_SIZE - 1;
if (running_total != 0)
num_trbs++;
@@ -2900,6 +2913,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
int running_total, trb_buff_len, td_len, td_remain_len, ret;
u64 start_addr, addr;
int i, j;
+ bool more_trbs_coming;
ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
@@ -2910,7 +2924,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
}
if (!in_interrupt())
- dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d),"
+ xhci_dbg(xhci, "ep %#x - urb len = %#x (%d),"
" addr = %#llx, num_tds = %d\n",
urb->ep->desc.bEndpointAddress,
urb->transfer_buffer_length,
@@ -2950,7 +2964,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
field |= TRB_TYPE(TRB_ISOC);
/* Assume URB_ISO_ASAP is set */
field |= TRB_SIA;
- if (i > 0)
+ if (i == 0) {
+ if (start_cycle == 0)
+ field |= 0x1;
+ } else
field |= ep_ring->cycle_state;
first_trb = false;
} else {
@@ -2965,9 +2982,11 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
*/
if (j < trbs_per_td - 1) {
field |= TRB_CHAIN;
+ more_trbs_coming = true;
} else {
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
+ more_trbs_coming = false;
}
/* Calculate TRB length */
@@ -2980,7 +2999,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
- queue_trb(xhci, ep_ring, false, false,
+ queue_trb(xhci, ep_ring, false, more_trbs_coming,
lower_32_bits(addr),
upper_32_bits(addr),
length_field,
@@ -3003,10 +3022,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
}
}
- wmb();
- start_trb->field[3] |= start_cycle;
-
- xhci_ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id);
+ giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
+ start_cycle, start_trb);
return 0;
}
@@ -3064,7 +3081,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
* to set the polling interval (once the API is added).
*/
if (xhci_interval != ep_interval) {
- if (!printk_ratelimit())
+ if (printk_ratelimit())
dev_dbg(&urb->dev->dev, "Driver uses different interval"
" (%d microframe%s) than xHCI "
"(%d microframe%s)\n",
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 45e4a3108cc..2083fc2179b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -109,7 +109,7 @@ int xhci_halt(struct xhci_hcd *xhci)
/*
* Set the run bit and wait for the host to be running.
*/
-int xhci_start(struct xhci_hcd *xhci)
+static int xhci_start(struct xhci_hcd *xhci)
{
u32 temp;
int ret;
@@ -226,7 +226,8 @@ static int xhci_setup_msi(struct xhci_hcd *xhci)
static int xhci_setup_msix(struct xhci_hcd *xhci)
{
int i, ret = 0;
- struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
/*
* calculate number of msi-x vectors supported.
@@ -265,6 +266,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
goto disable_msix;
}
+ hcd->msix_enabled = 1;
return ret;
disable_msix:
@@ -280,7 +282,8 @@ free_entries:
/* Free any IRQs and disable MSI-X */
static void xhci_cleanup_msix(struct xhci_hcd *xhci)
{
- struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
xhci_free_irq(xhci);
@@ -292,6 +295,7 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
pci_disable_msi(pdev);
}
+ hcd->msix_enabled = 0;
return;
}
@@ -325,7 +329,7 @@ int xhci_init(struct usb_hcd *hcd)
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
-void xhci_event_ring_work(unsigned long arg)
+static void xhci_event_ring_work(unsigned long arg)
{
unsigned long flags;
int temp;
@@ -469,7 +473,7 @@ int xhci_run(struct usb_hcd *hcd)
xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
xhci_writel(xhci, ER_IRQ_ENABLE(temp),
&xhci->ir_set->irq_pending);
- xhci_print_ir_set(xhci, xhci->ir_set, 0);
+ xhci_print_ir_set(xhci, 0);
if (NUM_TEST_NOOPS > 0)
doorbell = xhci_setup_one_noop(xhci);
@@ -508,9 +512,10 @@ void xhci_stop(struct usb_hcd *hcd)
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
xhci_reset(xhci);
- xhci_cleanup_msix(xhci);
spin_unlock_irq(&xhci->lock);
+ xhci_cleanup_msix(xhci);
+
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
/* Tell the event ring poll function not to reschedule */
xhci->zombie = 1;
@@ -523,7 +528,7 @@ void xhci_stop(struct usb_hcd *hcd)
temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
xhci_writel(xhci, ER_IRQ_DISABLE(temp),
&xhci->ir_set->irq_pending);
- xhci_print_ir_set(xhci, xhci->ir_set, 0);
+ xhci_print_ir_set(xhci, 0);
xhci_dbg(xhci, "cleaning up memory\n");
xhci_mem_cleanup(xhci);
@@ -544,9 +549,10 @@ void xhci_shutdown(struct usb_hcd *hcd)
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
- xhci_cleanup_msix(xhci);
spin_unlock_irq(&xhci->lock);
+ xhci_cleanup_msix(xhci);
+
xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
xhci_readl(xhci, &xhci->op_regs->status));
}
@@ -647,6 +653,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
int rc = 0;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
u32 command;
+ int i;
spin_lock_irq(&xhci->lock);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -677,10 +684,15 @@ int xhci_suspend(struct xhci_hcd *xhci)
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
- /* step 5: remove core well power */
- xhci_cleanup_msix(xhci);
spin_unlock_irq(&xhci->lock);
+ /* step 5: remove core well power */
+ /* synchronize irq when using MSI-X */
+ if (xhci->msix_entries) {
+ for (i = 0; i < xhci->msix_count; i++)
+ synchronize_irq(xhci->msix_entries[i].vector);
+ }
+
return rc;
}
@@ -694,7 +706,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
{
u32 command, temp = 0;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int old_state, retval;
old_state = hcd->state;
@@ -729,9 +740,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
xhci_dbg(xhci, "Stop HCD\n");
xhci_halt(xhci);
xhci_reset(xhci);
- if (hibernated)
- xhci_cleanup_msix(xhci);
spin_unlock_irq(&xhci->lock);
+ xhci_cleanup_msix(xhci);
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
/* Tell the event ring poll function not to reschedule */
@@ -745,7 +755,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
xhci_writel(xhci, ER_IRQ_DISABLE(temp),
&xhci->ir_set->irq_pending);
- xhci_print_ir_set(xhci, xhci->ir_set, 0);
+ xhci_print_ir_set(xhci, 0);
xhci_dbg(xhci, "cleaning up memory\n");
xhci_mem_cleanup(xhci);
@@ -765,30 +775,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
return retval;
}
- spin_unlock_irq(&xhci->lock);
- /* Re-setup MSI-X */
- if (hcd->irq)
- free_irq(hcd->irq, hcd);
- hcd->irq = -1;
-
- retval = xhci_setup_msix(xhci);
- if (retval)
- /* fall back to msi*/
- retval = xhci_setup_msi(xhci);
-
- if (retval) {
- /* fall back to legacy interrupt*/
- retval = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
- hcd->irq_descr, hcd);
- if (retval) {
- xhci_err(xhci, "request interrupt %d failed\n",
- pdev->irq);
- return retval;
- }
- hcd->irq = pdev->irq;
- }
-
- spin_lock_irq(&xhci->lock);
/* step 4: set Run/Stop bit */
command = xhci_readl(xhci, &xhci->op_regs->command);
command |= CMD_RUN;
@@ -871,7 +857,7 @@ unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
/* Returns 1 if the arguments are OK;
* returns 0 this is a root hub; returns -EINVAL for NULL pointers.
*/
-int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
+static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev,
const char *func) {
struct xhci_hcd *xhci;
@@ -1707,7 +1693,7 @@ static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci,
xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags));
}
-void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
+static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state)
{
@@ -2445,8 +2431,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
xhci_err(xhci, "Error while assigning device slot ID\n");
return 0;
}
- /* xhci_alloc_virt_device() does not touch rings; no need to lock */
- if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) {
+ /* xhci_alloc_virt_device() does not touch rings; no need to lock.
+ * Use GFP_NOIO, since this function can be called from
+ * xhci_discover_or_reset_device(), which may be called as part of
+ * mass storage driver error handling.
+ */
+ if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
/* Disable slot, if we can do it without mem alloc */
xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
spin_lock_irqsave(&xhci->lock, flags);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 170c367112d..7f127df6dd5 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -436,22 +436,18 @@ struct xhci_run_regs {
/**
* struct doorbell_array
*
+ * Bits 0 - 7: Endpoint target
+ * Bits 8 - 15: RsvdZ
+ * Bits 16 - 31: Stream ID
+ *
* Section 5.6
*/
struct xhci_doorbell_array {
u32 doorbell[256];
};
-#define DB_TARGET_MASK 0xFFFFFF00
-#define DB_STREAM_ID_MASK 0x0000FFFF
-#define DB_TARGET_HOST 0x0
-#define DB_STREAM_ID_HOST 0x0
-#define DB_MASK (0xff << 8)
-
-/* Endpoint Target - bits 0:7 */
-#define EPI_TO_DB(p) (((p) + 1) & 0xff)
-#define STREAM_ID_TO_DB(p) (((p) & 0xffff) << 16)
-
+#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
+#define DB_VALUE_HOST 0x00000000
/**
* struct xhci_protocol_caps
@@ -1352,7 +1348,7 @@ static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
}
/* xHCI debugging */
-void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
+void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num);
void xhci_print_registers(struct xhci_hcd *xhci);
void xhci_dbg_regs(struct xhci_hcd *xhci);
void xhci_print_run_regs(struct xhci_hcd *xhci);
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 44f8b922505..a6afd15f6a4 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -717,7 +717,7 @@ static int adu_probe(struct usb_interface *interface,
goto exit;
}
- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "Out of memory\n");
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index c9078e4e1f4..e573e470401 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -769,7 +769,7 @@ static int iowarrior_probe(struct usb_interface *interface,
int i;
int retval = -ENOMEM;
- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "Out of memory\n");
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index edffef64233..eefb8275bb7 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -642,7 +642,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
int i;
int retval = -ENOMEM;
- /* allocate memory for our device state and intialize it */
+ /* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 1732d9bc097..1616ad1793a 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -45,7 +45,7 @@ struct usb_led {
static void change_color(struct usb_led *led)
{
- int retval;
+ int retval = 0;
unsigned char *buffer;
buffer = kmalloc(8, GFP_KERNEL);
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 4ff21587ab0..f7a20573803 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -776,7 +776,6 @@ static const struct usb_device_id uss720_table[] = {
{ USB_DEVICE(0x0557, 0x2001) },
{ USB_DEVICE(0x0729, 0x1284) },
{ USB_DEVICE(0x1293, 0x0002) },
- { USB_DEVICE(0x1293, 0x0002) },
{ USB_DEVICE(0x050d, 0x0002) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index eeba228eb2a..9d49d1cd7ce 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -404,6 +404,7 @@ static int bfin_musb_init(struct musb *musb)
musb->xceiv->set_power = bfin_musb_set_power;
musb->isr = blackfin_interrupt;
+ musb->double_buffer_not_ok = true;
return 0;
}
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 07cf394e491..c292d5c499e 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -128,12 +128,7 @@ MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
static inline struct musb *dev_to_musb(struct device *dev)
{
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- /* usbcore insists dev->driver_data is a "struct hcd *" */
- return hcd_to_musb(dev_get_drvdata(dev));
-#else
return dev_get_drvdata(dev);
-#endif
}
/*-------------------------------------------------------------------------*/
@@ -1869,6 +1864,7 @@ allocate_instance(struct device *dev,
INIT_LIST_HEAD(&musb->out_bulk);
hcd->uses_new_polling = 1;
+ hcd->has_tt = 1;
musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
@@ -1876,10 +1872,9 @@ allocate_instance(struct device *dev,
musb = kzalloc(sizeof *musb, GFP_KERNEL);
if (!musb)
return NULL;
- dev_set_drvdata(dev, musb);
#endif
-
+ dev_set_drvdata(dev, musb);
musb->mregs = mbase;
musb->ctrl_base = mbase;
musb->nIrq = -ENODEV;
@@ -2191,7 +2186,7 @@ static int __init musb_probe(struct platform_device *pdev)
void __iomem *base;
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!iomem || irq == 0)
+ if (!iomem || irq <= 0)
return -ENODEV;
base = ioremap(iomem->start, resource_size(iomem));
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index d0c236f8e19..e6400be8a0f 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -497,6 +497,19 @@ struct musb {
struct usb_gadget_driver *gadget_driver; /* its driver */
#endif
+ /*
+ * FIXME: Remove this flag.
+ *
+ * This is only added to allow Blackfin to work
+ * with current driver. For some unknown reason
+ * Blackfin doesn't work with double buffering
+ * and that's enabled by default.
+ *
+ * We added this flag to forcefully disable double
+ * buffering until we get it working.
+ */
+ unsigned double_buffer_not_ok:1 __deprecated;
+
struct musb_hdrc_config *config;
#ifdef MUSB_CONFIG_PROC_FS
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 9e8639d4e86..b0176e4569e 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -36,7 +36,6 @@
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/list.h>
-#include <linux/kobject.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/debugfs.h>
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 916065ba9e7..3a97c4e2d4f 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -169,6 +169,9 @@ struct dma_controller {
dma_addr_t dma_addr,
u32 length);
int (*channel_abort)(struct dma_channel *);
+ int (*is_compatible)(struct dma_channel *channel,
+ u16 maxpacket,
+ void *buf, u32 length);
};
/* called after channel_program(), may indicate a fault */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 9b162dfaa4f..2fe304611dc 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -92,11 +92,33 @@
/* ----------------------------------------------------------------------- */
+#define is_buffer_mapped(req) (is_dma_capable() && \
+ (req->map_state != UN_MAPPED))
+
/* Maps the buffer to dma */
static inline void map_dma_buffer(struct musb_request *request,
- struct musb *musb)
+ struct musb *musb, struct musb_ep *musb_ep)
{
+ int compatible = true;
+ struct dma_controller *dma = musb->dma_controller;
+
+ request->map_state = UN_MAPPED;
+
+ if (!is_dma_capable() || !musb_ep->dma)
+ return;
+
+ /* Check if DMA engine can handle this request.
+ * DMA code must reject the USB request explicitly.
+ * Default behaviour is to map the request.
+ */
+ if (dma->is_compatible)
+ compatible = dma->is_compatible(musb_ep->dma,
+ musb_ep->packet_sz, request->request.buf,
+ request->request.length);
+ if (!compatible)
+ return;
+
if (request->request.dma == DMA_ADDR_INVALID) {
request->request.dma = dma_map_single(
musb->controller,
@@ -105,7 +127,7 @@ static inline void map_dma_buffer(struct musb_request *request,
request->tx
? DMA_TO_DEVICE
: DMA_FROM_DEVICE);
- request->mapped = 1;
+ request->map_state = MUSB_MAPPED;
} else {
dma_sync_single_for_device(musb->controller,
request->request.dma,
@@ -113,7 +135,7 @@ static inline void map_dma_buffer(struct musb_request *request,
request->tx
? DMA_TO_DEVICE
: DMA_FROM_DEVICE);
- request->mapped = 0;
+ request->map_state = PRE_MAPPED;
}
}
@@ -121,11 +143,14 @@ static inline void map_dma_buffer(struct musb_request *request,
static inline void unmap_dma_buffer(struct musb_request *request,
struct musb *musb)
{
+ if (!is_buffer_mapped(request))
+ return;
+
if (request->request.dma == DMA_ADDR_INVALID) {
DBG(20, "not unmapping a never mapped buffer\n");
return;
}
- if (request->mapped) {
+ if (request->map_state == MUSB_MAPPED) {
dma_unmap_single(musb->controller,
request->request.dma,
request->request.length,
@@ -133,16 +158,15 @@ static inline void unmap_dma_buffer(struct musb_request *request,
? DMA_TO_DEVICE
: DMA_FROM_DEVICE);
request->request.dma = DMA_ADDR_INVALID;
- request->mapped = 0;
- } else {
+ } else { /* PRE_MAPPED */
dma_sync_single_for_cpu(musb->controller,
request->request.dma,
request->request.length,
request->tx
? DMA_TO_DEVICE
: DMA_FROM_DEVICE);
-
}
+ request->map_state = UN_MAPPED;
}
/*
@@ -172,8 +196,7 @@ __acquires(ep->musb->lock)
ep->busy = 1;
spin_unlock(&musb->lock);
- if (is_dma_capable() && ep->dma)
- unmap_dma_buffer(req, musb);
+ unmap_dma_buffer(req, musb);
if (request->status == 0)
DBG(5, "%s done request %p, %d/%d\n",
ep->end_point.name, request,
@@ -335,7 +358,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
csr);
#ifndef CONFIG_MUSB_PIO_ONLY
- if (is_dma_capable() && musb_ep->dma) {
+ if (is_buffer_mapped(req)) {
struct dma_controller *c = musb->dma_controller;
size_t request_size;
@@ -436,8 +459,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
* Unmap the dma buffer back to cpu if dma channel
* programming fails
*/
- if (is_dma_capable() && musb_ep->dma)
- unmap_dma_buffer(req, musb);
+ unmap_dma_buffer(req, musb);
musb_write_fifo(musb_ep->hw_ep, fifo_count,
(u8 *) (request->buf + request->actual));
@@ -627,7 +649,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
return;
}
- if (is_cppi_enabled() && musb_ep->dma) {
+ if (is_cppi_enabled() && is_buffer_mapped(req)) {
struct dma_controller *c = musb->dma_controller;
struct dma_channel *channel = musb_ep->dma;
@@ -658,7 +680,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
len = musb_readw(epio, MUSB_RXCOUNT);
if (request->actual < request->length) {
#ifdef CONFIG_USB_INVENTRA_DMA
- if (is_dma_capable() && musb_ep->dma) {
+ if (is_buffer_mapped(req)) {
struct dma_controller *c;
struct dma_channel *channel;
int use_dma = 0;
@@ -742,7 +764,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
fifo_count = min_t(unsigned, len, fifo_count);
#ifdef CONFIG_USB_TUSB_OMAP_DMA
- if (tusb_dma_omap() && musb_ep->dma) {
+ if (tusb_dma_omap() && is_buffer_mapped(req)) {
struct dma_controller *c = musb->dma_controller;
struct dma_channel *channel = musb_ep->dma;
u32 dma_addr = request->dma + request->actual;
@@ -762,7 +784,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
* programming fails. This buffer is mapped if the
* channel allocation is successful
*/
- if (is_dma_capable() && musb_ep->dma) {
+ if (is_buffer_mapped(req)) {
unmap_dma_buffer(req, musb);
/*
@@ -989,7 +1011,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
/* Set TXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
- musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+ if (musb->double_buffer_not_ok)
+ musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
+ else
+ musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
+ | (musb_ep->hb_mult << 11));
csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
if (musb_readw(regs, MUSB_TXCSR)
@@ -1025,7 +1051,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
/* Set RXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
- musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+ if (musb->double_buffer_not_ok)
+ musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
+ else
+ musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
+ | (musb_ep->hb_mult << 11));
/* force shared fifo to OUT-only mode */
if (hw_ep->is_shared_fifo) {
@@ -1214,10 +1244,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
request->epnum = musb_ep->current_epnum;
request->tx = musb_ep->is_in;
- if (is_dma_capable() && musb_ep->dma)
- map_dma_buffer(request, musb);
- else
- request->mapped = 0;
+ map_dma_buffer(request, musb, musb_ep);
spin_lock_irqsave(&musb->lock, lockflags);
@@ -1684,7 +1711,7 @@ static inline void __init musb_g_init_endpoints(struct musb *musb)
struct musb_hw_ep *hw_ep;
unsigned count = 0;
- /* intialize endpoint list just once */
+ /* initialize endpoint list just once */
INIT_LIST_HEAD(&(musb->g.ep_list));
for (epnum = 0, hw_ep = musb->endpoints;
@@ -1765,7 +1792,7 @@ void musb_gadget_cleanup(struct musb *musb)
*
* -EINVAL something went wrong (not driver)
* -EBUSY another gadget is already using the controller
- * -ENOMEM no memeory to perform the operation
+ * -ENOMEM no memory to perform the operation
*
* @param driver the gadget driver
* @param bind the driver's bind function
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
index dec8dc00819..a55354fbccf 100644
--- a/drivers/usb/musb/musb_gadget.h
+++ b/drivers/usb/musb/musb_gadget.h
@@ -35,13 +35,19 @@
#ifndef __MUSB_GADGET_H
#define __MUSB_GADGET_H
+enum buffer_map_state {
+ UN_MAPPED = 0,
+ PRE_MAPPED,
+ MUSB_MAPPED
+};
+
struct musb_request {
struct usb_request request;
struct musb_ep *ep;
struct musb *musb;
u8 tx; /* endpoint direction */
u8 epnum;
- u8 mapped;
+ enum buffer_map_state map_state;
};
static inline struct musb_request *to_musb_request(struct usb_request *req)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 4d5bcb4e14d..0f523d7db57 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -609,7 +609,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
/* Set RXMAXP with the FIFO size of the endpoint
* to disable double buffer mode.
*/
- if (musb->hwvers < MUSB_HWVERS_2000)
+ if (musb->double_buffer_not_ok)
musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
else
musb_writew(ep->regs, MUSB_RXMAXP,
@@ -784,14 +784,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
/* protocol/endpoint/interval/NAKlimit */
if (epnum) {
musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
- if (can_bulk_split(musb, qh->type))
+ if (musb->double_buffer_not_ok)
musb_writew(epio, MUSB_TXMAXP,
- packet_sz
- | ((hw_ep->max_packet_sz_tx /
- packet_sz) - 1) << 11);
+ hw_ep->max_packet_sz_tx);
else
musb_writew(epio, MUSB_TXMAXP,
- packet_sz);
+ qh->maxpacket |
+ ((qh->hb_mult - 1) << 11));
musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
} else {
musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index f763d62f151..21056c924c7 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -94,24 +94,33 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase,
{
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
- ((u16)((u32) dma_addr & 0xFFFF)));
+ dma_addr);
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
- ((u16)(((u32) dma_addr >> 16) & 0xFFFF)));
+ (dma_addr >> 16));
}
static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
{
- return musb_readl(mbase,
+ u32 count = musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
+
+ count = count << 16;
+
+ count |= musb_readw(mbase,
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
+
+ return count;
}
static inline void musb_write_hsdma_count(void __iomem *mbase,
u8 bchannel, u32 len)
{
- musb_writel(mbase,
+ musb_writew(mbase,
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len);
+ musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
- len);
+ (len >> 16));
}
#endif /* CONFIG_BLACKFIN */
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index a3f12333fc4..bc8badd1689 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -362,6 +362,7 @@ static int omap2430_musb_init(struct musb *musb)
static int omap2430_musb_exit(struct musb *musb)
{
+ del_timer_sync(&musb_idle_timer);
omap2430_low_level_exit(musb);
otg_put_transceiver(musb->xceiv);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 9fb875d5f09..9ffc8237fb4 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -103,6 +103,8 @@ config USB_MSM_OTG_72K
required after resetting the hardware and power management.
This driver is required even for peripheral only or host only
mode configurations.
+ This driver is not supported on boards like trout which
+ has an external PHY.
config AB8500_USB
tristate "AB8500 USB Transceiver Driver"
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index e70014ab097..8acf165fe13 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -132,6 +132,8 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, nop);
+ BLOCKING_INIT_NOTIFIER_HEAD(&nop->otg.notifier);
+
return 0;
exit:
kfree(nop);
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index 059d9ac0ab5..770d799d5af 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -45,7 +45,7 @@ struct ulpi_info {
/* ULPI hardcoded IDs, used for probing */
static struct ulpi_info ulpi_ids[] = {
ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"),
- ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB3319"),
+ ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"),
};
static int ulpi_set_otg_flags(struct otg_transceiver *otg)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 63f7cc45bca..7b8815ddf36 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -486,12 +486,22 @@ static void ch341_read_int_callback(struct urb *urb)
if (actual_length >= 4) {
struct ch341_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
+ u8 prev_line_status = priv->line_status;
spin_lock_irqsave(&priv->lock, flags);
priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
if ((data[1] & CH341_MULT_STAT))
priv->multi_status_change = 1;
spin_unlock_irqrestore(&priv->lock, flags);
+
+ if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) {
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty)
+ usb_serial_handle_dcd_change(port, tty,
+ priv->line_status & CH341_BIT_DCD);
+ tty_kref_put(tty);
+ }
+
wake_up_interruptible(&priv->delta_msr_wait);
}
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8d7731dbf47..735ea03157a 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -49,7 +49,6 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
static void cp210x_break_ctl(struct tty_struct *, int);
static int cp210x_startup(struct usb_serial *);
static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
-static int cp210x_carrier_raised(struct usb_serial_port *p);
static int debug;
@@ -87,7 +86,6 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
- { USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
@@ -110,7 +108,9 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+ { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
@@ -165,8 +165,7 @@ static struct usb_serial_driver cp210x_device = {
.tiocmget = cp210x_tiocmget,
.tiocmset = cp210x_tiocmset,
.attach = cp210x_startup,
- .dtr_rts = cp210x_dtr_rts,
- .carrier_raised = cp210x_carrier_raised
+ .dtr_rts = cp210x_dtr_rts
};
/* Config request types */
@@ -765,15 +764,6 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
return result;
}
-static int cp210x_carrier_raised(struct usb_serial_port *p)
-{
- unsigned int control;
- cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1);
- if (control & CONTROL_DCD)
- return 1;
- return 0;
-}
-
static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b92070c103c..666e5a6edd8 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -455,7 +455,6 @@ static int digi_write_room(struct tty_struct *tty);
static int digi_chars_in_buffer(struct tty_struct *tty);
static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
static void digi_close(struct usb_serial_port *port);
-static int digi_carrier_raised(struct usb_serial_port *port);
static void digi_dtr_rts(struct usb_serial_port *port, int on);
static int digi_startup_device(struct usb_serial *serial);
static int digi_startup(struct usb_serial *serial);
@@ -511,7 +510,6 @@ static struct usb_serial_driver digi_acceleport_2_device = {
.open = digi_open,
.close = digi_close,
.dtr_rts = digi_dtr_rts,
- .carrier_raised = digi_carrier_raised,
.write = digi_write,
.write_room = digi_write_room,
.write_bulk_callback = digi_write_bulk_callback,
@@ -1339,14 +1337,6 @@ static void digi_dtr_rts(struct usb_serial_port *port, int on)
digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
}
-static int digi_carrier_raised(struct usb_serial_port *port)
-{
- struct digi_port *priv = usb_get_serial_port_data(port);
- if (priv->dp_modem_signals & TIOCM_CD)
- return 1;
- return 0;
-}
-
static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int ret;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index a2668d08926..f349a3629d0 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -100,6 +100,7 @@ struct ftdi_sio_quirk {
static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
static int ftdi_NDI_device_setup(struct usb_serial *serial);
+static int ftdi_stmclite_probe(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
@@ -123,6 +124,10 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
.port_probe = ftdi_HE_TIRA1_setup,
};
+static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
+ .probe = ftdi_stmclite_probe,
+};
+
/*
* The 8U232AM has the same API as the sio except for:
* - it can support MUCH higher baudrates; up to:
@@ -616,6 +621,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+ { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
@@ -676,7 +682,17 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
- { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
@@ -800,6 +816,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -1699,6 +1717,25 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
}
/*
+ * First and second port on STMCLiteadaptors is reserved for JTAG interface
+ * and the forth port for pio
+ */
+static int ftdi_stmclite_probe(struct usb_serial *serial)
+{
+ struct usb_device *udev = serial->dev;
+ struct usb_interface *interface = serial->interface;
+
+ dbg("%s", __func__);
+
+ if (interface == udev->actconfig->interface[2])
+ return 0;
+
+ dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+
+ return -ENODEV;
+}
+
+/*
* The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
* We have to correct it if we want to read from it.
*/
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index bf086728548..117e8e6f93c 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -518,6 +518,12 @@
#define RATOC_PRODUCT_ID_USB60F 0xb020
/*
+ * Acton Research Corp.
+ */
+#define ACTON_VID 0x0647 /* Vendor ID */
+#define ACTON_SPECTRAPRO_PID 0x0100
+
+/*
* Contec products (http://www.contec.com)
* Submitted by Daniel Sangorrin
*/
@@ -569,11 +575,23 @@
#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
/*
- * Icom ID-1 digital transceiver
+ * Definitions for Icom Inc. devices
*/
-
-#define ICOM_ID1_VID 0x0C26
-#define ICOM_ID1_PID 0x0004
+#define ICOM_VID 0x0C26 /* Icom vendor ID */
+/* Note: ID-1 is a communications tranceiver for HAM-radio operators */
+#define ICOM_ID_1_PID 0x0004 /* ID-1 USB to RS-232 */
+/* Note: OPC is an Optional cable to connect an Icom Tranceiver */
+#define ICOM_OPC_U_UC_PID 0x0018 /* OPC-478UC, OPC-1122U cloning cable */
+/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
+#define ICOM_ID_RP2C1_PID 0x0009 /* ID-RP2C Asset 1 to RS-232 */
+#define ICOM_ID_RP2C2_PID 0x000A /* ID-RP2C Asset 2 to RS-232 */
+#define ICOM_ID_RP2D_PID 0x000B /* ID-RP2D configuration port*/
+#define ICOM_ID_RP2VT_PID 0x000C /* ID-RP2V Transmit config port */
+#define ICOM_ID_RP2VR_PID 0x000D /* ID-RP2V Receive config port */
+#define ICOM_ID_RP4KVT_PID 0x0010 /* ID-RP4000V Transmit config port */
+#define ICOM_ID_RP4KVR_PID 0x0011 /* ID-RP4000V Receive config port */
+#define ICOM_ID_RP2KVT_PID 0x0012 /* ID-RP2000V Transmit config port */
+#define ICOM_ID_RP2KVR_PID 0x0013 /* ID-RP2000V Receive config port */
/*
* GN Otometrics (http://www.otometrics.com)
@@ -1022,6 +1040,12 @@
#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
/*
+ * STMicroelectonics
+ */
+#define ST_VID 0x0483
+#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */
+
+/*
* Papouch products (http://www.papouch.com/)
* Submitted by Folkert van Heusden
*/
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index e6833e216fc..e4db5ad2bc5 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -479,6 +479,26 @@ int usb_serial_handle_break(struct usb_serial_port *port)
}
EXPORT_SYMBOL_GPL(usb_serial_handle_break);
+/**
+ * usb_serial_handle_dcd_change - handle a change of carrier detect state
+ * @port: usb_serial_port structure for the open port
+ * @tty: tty_struct structure for the port
+ * @status: new carrier detect status, nonzero if active
+ */
+void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
+ struct tty_struct *tty, unsigned int status)
+{
+ struct tty_port *port = &usb_port->port;
+
+ dbg("%s - port %d, status %d", __func__, usb_port->number, status);
+
+ if (status)
+ wake_up_interruptible(&port->open_wait);
+ else if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_dcd_change);
+
int usb_serial_generic_resume(struct usb_serial *serial)
{
struct usb_serial_port *port;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index cd769ef24f8..3b246d93cf2 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2889,8 +2889,8 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
- edge_serial->product_info.FirmwareMajorVersion = fw->data[0];
- edge_serial->product_info.FirmwareMinorVersion = fw->data[1];
+ edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
+ edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
for (rec = ihex_next_binrec(rec); rec;
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 6ab2a3f97fe..178b22eb32b 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -199,6 +199,7 @@ static struct usb_serial_driver epic_device = {
.name = "epic",
},
.description = "EPiC device",
+ .usb_driver = &io_driver,
.id_table = Epic_port_id_table,
.num_ports = 1,
.open = edge_open,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 12ed594f5f8..99b97c04896 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1275,6 +1275,7 @@ static struct usb_serial_driver iuu_device = {
.name = "iuu_phoenix",
},
.id_table = id_table,
+ .usb_driver = &iuu_driver,
.num_ports = 1,
.bulk_in_size = 512,
.bulk_out_size = 512,
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 2d8baf6ac47..ce134dc28dd 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -546,6 +546,7 @@ static struct usb_serial_driver keyspan_pre_device = {
.name = "keyspan_no_firm",
},
.description = "Keyspan - (without firmware)",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_pre_ids,
.num_ports = 1,
.attach = keyspan_fake_startup,
@@ -557,6 +558,7 @@ static struct usb_serial_driver keyspan_1port_device = {
.name = "keyspan_1",
},
.description = "Keyspan 1 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_1port_ids,
.num_ports = 1,
.open = keyspan_open,
@@ -579,6 +581,7 @@ static struct usb_serial_driver keyspan_2port_device = {
.name = "keyspan_2",
},
.description = "Keyspan 2 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_2port_ids,
.num_ports = 2,
.open = keyspan_open,
@@ -601,6 +604,7 @@ static struct usb_serial_driver keyspan_4port_device = {
.name = "keyspan_4",
},
.description = "Keyspan 4 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_4port_ids,
.num_ports = 4,
.open = keyspan_open,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index a10dd5676cc..554a8693a46 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -679,22 +679,6 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
}
}
-static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
-{
- struct usb_serial *serial = port->serial;
- unsigned char modembits;
-
- /* If we can read the modem status and the DCD is low then
- carrier is not raised yet */
- if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) {
- if (!(modembits & (1>>6)))
- return 0;
- }
- /* Carrier raised, or we failed (eg disconnected) so
- progress accordingly */
- return 1;
-}
-
static int keyspan_pda_open(struct tty_struct *tty,
struct usb_serial_port *port)
@@ -881,7 +865,6 @@ static struct usb_serial_driver keyspan_pda_device = {
.id_table = id_table_std,
.num_ports = 1,
.dtr_rts = keyspan_pda_dtr_rts,
- .carrier_raised = keyspan_pda_carrier_raised,
.open = keyspan_pda_open,
.close = keyspan_pda_close,
.write = keyspan_pda_write,
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index cf1718394e1..653465f61d4 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -44,6 +44,7 @@ static struct usb_serial_driver moto_device = {
.name = "moto-modem",
},
.id_table = id_table,
+ .usb_driver = &moto_driver,
.num_ports = 1,
};
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index cdfb1868cae..5f46838dfee 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -382,7 +382,16 @@ static void option_instat_callback(struct urb *urb);
#define HAIER_VENDOR_ID 0x201e
#define HAIER_PRODUCT_CE100 0x2009
-#define CINTERION_VENDOR_ID 0x0681
+/* Cinterion (formerly Siemens) products */
+#define SIEMENS_VENDOR_ID 0x0681
+#define CINTERION_VENDOR_ID 0x1e2d
+#define CINTERION_PRODUCT_HC25_MDM 0x0047
+#define CINTERION_PRODUCT_HC25_MDMNET 0x0040
+#define CINTERION_PRODUCT_HC28_MDM 0x004C
+#define CINTERION_PRODUCT_HC28_MDMNET 0x004A /* same for HC28J */
+#define CINTERION_PRODUCT_EU3_E 0x0051
+#define CINTERION_PRODUCT_EU3_P 0x0052
+#define CINTERION_PRODUCT_PH8 0x0053
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -615,7 +624,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0006, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0007, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0008, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0009, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000a, 0xff, 0xff, 0xff) },
@@ -945,7 +953,17 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) },
{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)},
{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},
- { USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) },
+ /* Cinterion */
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */
+ { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 5be866bb7a4..73613205be7 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -157,6 +157,7 @@ static struct usb_serial_driver oti6858_device = {
.name = "oti6858",
},
.id_table = id_table,
+ .usb_driver = &oti6858_driver,
.num_ports = 1,
.open = oti6858_open,
.close = oti6858_close,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 8ae4c6cbc38..08c9181b8e4 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -50,6 +50,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
@@ -677,9 +678,11 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
+ struct tty_struct *tty;
unsigned long flags;
u8 status_idx = UART_STATE;
u8 length = UART_STATE + 1;
+ u8 prev_line_status;
u16 idv, idp;
idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
@@ -701,11 +704,20 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
/* Save off the uart status for others to look at */
spin_lock_irqsave(&priv->lock, flags);
+ prev_line_status = priv->line_status;
priv->line_status = data[status_idx];
spin_unlock_irqrestore(&priv->lock, flags);
if (priv->line_status & UART_BREAK_ERROR)
usb_serial_handle_break(port);
wake_up_interruptible(&priv->delta_msr_wait);
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return;
+ if ((priv->line_status ^ prev_line_status) & UART_DCD)
+ usb_serial_handle_dcd_change(port, tty,
+ priv->line_status & UART_DCD);
+ tty_kref_put(tty);
}
static void pl2303_read_int_callback(struct urb *urb)
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 43eb9bdad42..1b025f75daf 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -21,6 +21,7 @@
#define PL2303_PRODUCT_ID_MMX 0x0612
#define PL2303_PRODUCT_ID_GPRS 0x0609
#define PL2303_PRODUCT_ID_HCR331 0x331a
+#define PL2303_PRODUCT_ID_MOTOROLA 0x0307
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 214a3e50429..30b73e68a90 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -36,6 +36,7 @@
#define UTSTARCOM_PRODUCT_UM175_V1 0x3712
#define UTSTARCOM_PRODUCT_UM175_V2 0x3714
#define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715
+#define PANTECH_PRODUCT_UML290_VZW 0x3718
/* CMOTECH devices */
#define CMOTECH_VENDOR_ID 0x16d8
@@ -66,6 +67,7 @@ static struct usb_device_id id_table[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -84,6 +86,7 @@ static struct usb_serial_driver qcaux_device = {
.name = "qcaux",
},
.id_table = id_table,
+ .usb_driver = &qcaux_driver,
.num_ports = 1,
};
diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c
index cb8195cabfd..74cd4ccdb3f 100644
--- a/drivers/usb/serial/siemens_mpi.c
+++ b/drivers/usb/serial/siemens_mpi.c
@@ -42,6 +42,7 @@ static struct usb_serial_driver siemens_usb_mpi_device = {
.name = "siemens_mpi",
},
.id_table = id_table,
+ .usb_driver = &siemens_usb_mpi_driver,
.num_ports = 1,
};
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 7481ff8a49e..0457813eebe 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -301,6 +301,9 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
{ USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
{ }
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 765aa983bf5..cbfb70bffdd 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -133,7 +133,7 @@ struct spcp8x5_usb_ctrl_arg {
/* how come ??? */
#define UART_STATE 0x08
-#define UART_STATE_TRANSIENT_MASK 0x74
+#define UART_STATE_TRANSIENT_MASK 0x75
#define UART_DCD 0x01
#define UART_DSR 0x02
#define UART_BREAK_ERROR 0x04
@@ -525,6 +525,10 @@ static void spcp8x5_process_read_urb(struct urb *urb)
/* overrun is special, not associated with a char */
if (status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+ if (status & UART_DCD)
+ usb_serial_handle_dcd_change(port, tty,
+ priv->line_status & MSR_STATUS_LINE_DCD);
}
tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
@@ -645,6 +649,7 @@ static struct usb_serial_driver spcp8x5_device = {
.name = "SPCP8x5",
},
.id_table = id_table,
+ .usb_driver = &spcp8x5_driver,
.num_ports = 1,
.open = spcp8x5_open,
.dtr_rts = spcp8x5_dtr_rts,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index b2902f307b4..a910004f407 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -369,9 +369,9 @@ failed_1port:
static void __exit ti_exit(void)
{
+ usb_deregister(&ti_usb_driver);
usb_serial_deregister(&ti_1port_device);
usb_serial_deregister(&ti_2port_device);
- usb_deregister(&ti_usb_driver);
}
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 6954de50c0f..546a52179be 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1344,11 +1344,15 @@ int usb_serial_register(struct usb_serial_driver *driver)
return -ENODEV;
fixup_generic(driver);
- if (driver->usb_driver)
- driver->usb_driver->supports_autosuspend = 1;
if (!driver->description)
driver->description = driver->driver.name;
+ if (!driver->usb_driver) {
+ WARN(1, "Serial driver %s has no usb_driver\n",
+ driver->description);
+ return -EINVAL;
+ }
+ driver->usb_driver->supports_autosuspend = 1;
/* Add this device to our list of devices */
mutex_lock(&table_lock);
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index f2ed6a31be7..95a82148ee8 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -75,6 +75,7 @@ static struct usb_serial_driver debug_device = {
.name = "debug",
},
.id_table = id_table,
+ .usb_driver = &debug_driver,
.num_ports = 1,
.bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE,
.break_ctl = usb_debug_break_ctl,
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index b004b2a485c..9c014e2ecd6 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -295,12 +295,15 @@ static void usb_wwan_indat_callback(struct urb *urb)
__func__, status, endpoint);
} else {
tty = tty_port_tty_get(&port->port);
- if (urb->actual_length) {
- tty_insert_flip_string(tty, data, urb->actual_length);
- tty_flip_buffer_push(tty);
- } else
- dbg("%s: empty read urb received", __func__);
- tty_kref_put(tty);
+ if (tty) {
+ if (urb->actual_length) {
+ tty_insert_flip_string(tty, data,
+ urb->actual_length);
+ tty_flip_buffer_push(tty);
+ } else
+ dbg("%s: empty read urb received", __func__);
+ tty_kref_put(tty);
+ }
/* Resubmit urb so we continue receiving */
if (status != -ESHUTDOWN) {
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 15a5d89b7f3..1c11959a7d5 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -27,6 +27,7 @@
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <linux/usb/cdc.h>
#include "visor.h"
/*
@@ -479,6 +480,17 @@ static int visor_probe(struct usb_serial *serial,
dbg("%s", __func__);
+ /*
+ * some Samsung Android phones in modem mode have the same ID
+ * as SPH-I500, but they are ACM devices, so dont bind to them
+ */
+ if (id->idVendor == SAMSUNG_VENDOR_ID &&
+ id->idProduct == SAMSUNG_SPH_I500_ID &&
+ serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
+ serial->dev->descriptor.bDeviceSubClass ==
+ USB_CDC_SUBCLASS_ACM)
+ return -ENODEV;
+
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
serial->dev->actconfig->desc.bConfigurationValue);
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index c854fdebe0a..2c855302622 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -31,4 +31,9 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999,
"Cypress ISD-300LP",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x9999,
+ "Super Top",
+ "USB 2.0 SATA BRIDGE",
+ USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
+
#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index fcc1e32ce25..c1602b8c559 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1044,6 +1044,15 @@ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BULK32),
+/* Reported by <ttkspam@free.fr>
+ * The device reports a vendor-specific device class, requiring an
+ * explicit vendor/product match.
+ */
+UNUSUAL_DEV( 0x0851, 0x1542, 0x0002, 0x0002,
+ "MagicPixel",
+ "FW_Omega2",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
+
/* Andrew Lunn <andrew@lunn.ch>
* PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
* on LUN 4.
@@ -1388,6 +1397,13 @@ UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Submitted by Nick Holloway */
+UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100,
+ "VTech",
+ "Kidizoom",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Michael Stattmann <michael@stattmann.com> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",
@@ -1872,6 +1888,22 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_READ_DISC_INFO ),
+/* Patch by Richard Schütz <r.schtz@t-online.de>
+ * This external hard drive enclosure uses a JMicron chip which
+ * needs the US_FL_IGNORE_RESIDUE flag to work properly. */
+UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000,
+ "TrekStor GmbH & Co. KG",
+ "DataStation maxi g.u",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+
+/* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */
+UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000,
+ "Coby Electronics",
+ "MP3 Player",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+
UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
"ST",
"2A",
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index c7b1d8108de..8cb9d80207f 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -49,7 +49,7 @@
*
* USB Stack port number 4 (1 based)
* WUSB code port index 3 (0 based)
- * USB Addresss 5 (2 based -- 0 is for default, 1 for root hub)
+ * USB Address 5 (2 based -- 0 is for default, 1 for root hub)
*
* Now, because we don't use the concept as default address exactly
* like the (wired) USB code does, we need to kind of skip it. So we