diff options
Diffstat (limited to 'drivers/usb/storage/scsiglue.c')
| -rw-r--r-- | drivers/usb/storage/scsiglue.c | 43 |
1 files changed, 43 insertions, 0 deletions
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 09779f6a817..2a42b862aa9 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -59,6 +59,13 @@ #include "transport.h" #include "protocol.h" +/* Vendor IDs for companies that seem to include the READ CAPACITY bug + * in all their devices + */ +#define VENDOR_ID_NOKIA 0x0421 +#define VENDOR_ID_NIKON 0x04b0 +#define VENDOR_ID_MOTOROLA 0x22b8 + /*********************************************************************** * Host functions ***********************************************************************/ @@ -129,11 +136,35 @@ static int slave_configure(struct scsi_device *sdev) max_sectors); } + /* Some USB host controllers can't do DMA; they have to use PIO. + * They indicate this by setting their dma_mask to NULL. For + * such controllers we need to make sure the block layer sets + * up bounce buffers in addressable memory. + */ + if (!us->pusb_dev->bus->controller->dma_mask) + blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH); + /* We can't put these settings in slave_alloc() because that gets * called before the device type is known. Consequently these * settings can't be overridden via the scsi devinfo mechanism. */ if (sdev->type == TYPE_DISK) { + /* Some vendors seem to put the READ CAPACITY bug into + * all their devices -- primarily makers of cell phones + * and digital cameras. Since these devices always use + * flash media and can be expected to have an even number + * of sectors, we will always enable the CAPACITY_HEURISTICS + * flag unless told otherwise. */ + switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) { + case VENDOR_ID_NOKIA: + case VENDOR_ID_NIKON: + case VENDOR_ID_MOTOROLA: + if (!(us->fflags & (US_FL_FIX_CAPACITY | + US_FL_CAPACITY_OK))) + us->fflags |= US_FL_CAPACITY_HEURISTICS; + break; + } + /* Disk-type devices use MODE SENSE(6) if the protocol * (SubClass) is Transparent SCSI, otherwise they use * MODE SENSE(10). */ @@ -170,6 +201,10 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_CAPACITY_HEURISTICS) sdev->guess_capacity = 1; + /* assume SPC3 or latter devices support sense size > 18 */ + if (sdev->scsi_level > SCSI_SPC_2) + us->fflags |= US_FL_SANE_SENSE; + /* Some devices report a SCSI revision level above 2 but are * unable to handle the REPORT LUNS command (for which * support is mandatory at level 3). Since we already have @@ -196,6 +231,14 @@ static int slave_configure(struct scsi_device *sdev) * sector in a larger then 1 sector read, since the performance * impact is negible we set this flag for all USB disks */ sdev->last_sector_bug = 1; + + /* Enable last-sector hacks for single-target devices using + * the Bulk-only transport, unless we already know the + * capacity will be decremented or is correct. */ + if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK | + US_FL_SCM_MULT_TARG)) && + us->protocol == US_PR_BULK) + us->use_last_sector_hacks = 1; } else { /* Non-disk-type devices don't need to blacklist any pages |